From 8cfac9a6744fcb143cb3e94ce002f09fd17fadbb Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 8 Sep 2021 10:28:19 +0800 Subject: usb: dwc3: core: balance phy init and exit After we start to do core soft reset while usb role switch, the phy init is invoked at every switch to device mode, but its counter part de-init is missing, this causes the actual phy init can not be done when we really want to re-init phy like system resume, because the counter maintained by phy core is not 0. considering phy init is actually redundant for role switch, so move out the phy init from core soft reset to dwc3 core init where is the only place required. Fixes: f88359e1588b ("usb: dwc3: core: Do core softreset when switch mode") Cc: Tested-by: faqiang.zhu Tested-by: John Stultz #HiKey960 Acked-by: Felipe Balbi Signed-off-by: Li Jun Link: https://lore.kernel.org/r/1631068099-13559-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 01866dcb953b..0104a80b185e 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -264,19 +264,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; int retries = 1000; - int ret; - - usb_phy_init(dwc->usb2_phy); - usb_phy_init(dwc->usb3_phy); - ret = phy_init(dwc->usb2_generic_phy); - if (ret < 0) - return ret; - - ret = phy_init(dwc->usb3_generic_phy); - if (ret < 0) { - phy_exit(dwc->usb2_generic_phy); - return ret; - } /* * We're resetting only the device side because, if we're in host mode, @@ -310,9 +297,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) udelay(1); } while (--retries); - phy_exit(dwc->usb3_generic_phy); - phy_exit(dwc->usb2_generic_phy); - return -ETIMEDOUT; done: @@ -982,9 +966,21 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->phys_ready = true; } + usb_phy_init(dwc->usb2_phy); + usb_phy_init(dwc->usb3_phy); + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + goto err0a; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) { + phy_exit(dwc->usb2_generic_phy); + goto err0a; + } + ret = dwc3_core_soft_reset(dwc); if (ret) - goto err0a; + goto err1; if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { -- cgit v1.2.3