From 927a7c9c1793def3a55d60c926d3945528e6bf1b Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Fri, 19 Mar 2010 04:47:19 +0000
Subject: dmaengine: shdma: Enable on SH-Mobile ARM

Enable the shdma dmaengine driver on SH-Mobile ARM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/dma/Kconfig | 2 +-
 drivers/dma/shdma.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index c27f80e5d531..9d8ca990dde6 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -128,7 +128,7 @@ config TXX9_DMAC
 
 config SH_DMAE
 	tristate "Renesas SuperH DMAC support"
-	depends on SUPERH && SH_DMA
+	depends on (SUPERH && SH_DMA) || (ARM && ARCH_SHMOBILE)
 	depends on !SH_DMA_API
 	select DMA_ENGINE
 	help
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index 7a18b580f626..bbc3dfeed9b2 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -793,7 +793,7 @@ static irqreturn_t sh_dmae_interrupt(int irq, void *data)
 	return ret;
 }
 
-#if defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
 static irqreturn_t sh_dmae_err(int irq, void *data)
 {
 	struct sh_dmae_device *shdev = (struct sh_dmae_device *)data;
@@ -1034,7 +1034,7 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
 	/* Default transfer size of 32 bytes requires 32-byte alignment */
 	shdev->common.copy_align = LOG2_DEFAULT_XFER_SIZE;
 
-#if defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
 	chanirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
 
 	if (!chanirq_res)
@@ -1059,7 +1059,7 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
 
 #else
 	chanirq_res = errirq_res;
-#endif /* CONFIG_CPU_SH4 */
+#endif /* CONFIG_CPU_SH4 || CONFIG_ARCH_SHMOBILE */
 
 	if (chanirq_res->start == chanirq_res->end &&
 	    !platform_get_resource(pdev, IORESOURCE_IRQ, 1)) {
@@ -1106,7 +1106,7 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
 chan_probe_err:
 	sh_dmae_chan_remove(shdev);
 eirqres:
-#if defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
 	free_irq(errirq, shdev);
 eirq_err:
 #endif
-- 
cgit v1.2.3


From 12a55f2db71e0a1474ba56ab1c93287600b915be Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Thu, 11 Mar 2010 10:05:50 +0000
Subject: i2c: i2c-sh_mobile register access code break out

Break out register access functions in the
i2c-sh_mobile driver. This update should not
change any driver logic.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/i2c/busses/i2c-sh_mobile.c | 90 ++++++++++++++++++++++----------------
 1 file changed, 53 insertions(+), 37 deletions(-)

(limited to 'drivers')

diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index ffb405d7c6f2..d2fabd9dbf80 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -132,12 +132,12 @@ struct sh_mobile_i2c_data {
 #define NORMAL_SPEED		100000 /* FAST_SPEED 400000 */
 
 /* Register offsets */
-#define ICDR(pd)		(pd->reg + 0x00)
-#define ICCR(pd)		(pd->reg + 0x04)
-#define ICSR(pd)		(pd->reg + 0x08)
-#define ICIC(pd)		(pd->reg + 0x0c)
-#define ICCL(pd)		(pd->reg + 0x10)
-#define ICCH(pd)		(pd->reg + 0x14)
+#define ICDR			0x00
+#define ICCR			0x04
+#define ICSR			0x08
+#define ICIC			0x0c
+#define ICCL			0x10
+#define ICCH			0x14
 
 /* Register bits */
 #define ICCR_ICE		0x80
@@ -160,6 +160,22 @@ struct sh_mobile_i2c_data {
 #define ICIC_WAITE		0x02
 #define ICIC_DTEE		0x01
 
+static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data)
+{
+	iowrite8(data, pd->reg + offs);
+}
+
+static unsigned char iic_rd(struct sh_mobile_i2c_data *pd, int offs)
+{
+	return ioread8(pd->reg + offs);
+}
+
+static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs,
+			unsigned char set, unsigned char clr)
+{
+	iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr);
+}
+
 static void activate_ch(struct sh_mobile_i2c_data *pd)
 {
 	unsigned long i2c_clk;
@@ -197,24 +213,24 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
 		pd->icch = (u_int8_t)(num/denom);
 
 	/* Enable channel and configure rx ack */
-	iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
 
 	/* Mask all interrupts */
-	iowrite8(0, ICIC(pd));
+	iic_wr(pd, ICIC, 0);
 
 	/* Set the clock */
-	iowrite8(pd->iccl, ICCL(pd));
-	iowrite8(pd->icch, ICCH(pd));
+	iic_wr(pd, ICCL, pd->iccl);
+	iic_wr(pd, ICCH, pd->icch);
 }
 
 static void deactivate_ch(struct sh_mobile_i2c_data *pd)
 {
 	/* Clear/disable interrupts */
-	iowrite8(0, ICSR(pd));
-	iowrite8(0, ICIC(pd));
+	iic_wr(pd, ICSR, 0);
+	iic_wr(pd, ICIC, 0);
 
 	/* Disable channel */
-	iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, 0, ICCR_ICE);
 
 	/* Disable clock and mark device as idle */
 	clk_disable(pd->clk);
@@ -233,35 +249,35 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
 
 	switch (op) {
 	case OP_START: /* issue start and trigger DTE interrupt */
-		iowrite8(0x94, ICCR(pd));
+		iic_wr(pd, ICCR, 0x94);
 		break;
 	case OP_TX_FIRST: /* disable DTE interrupt and write data */
-		iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
-		iowrite8(data, ICDR(pd));
+		iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		iic_wr(pd, ICDR, data);
 		break;
 	case OP_TX: /* write data */
-		iowrite8(data, ICDR(pd));
+		iic_wr(pd, ICDR, data);
 		break;
 	case OP_TX_STOP: /* write data and issue a stop afterwards */
-		iowrite8(data, ICDR(pd));
-		iowrite8(0x90, ICCR(pd));
+		iic_wr(pd, ICDR, data);
+		iic_wr(pd, ICCR, 0x90);
 		break;
 	case OP_TX_TO_RX: /* select read mode */
-		iowrite8(0x81, ICCR(pd));
+		iic_wr(pd, ICCR, 0x81);
 		break;
 	case OP_RX: /* just read data */
-		ret = ioread8(ICDR(pd));
+		ret = iic_rd(pd, ICDR);
 		break;
 	case OP_RX_STOP: /* enable DTE interrupt, issue stop */
-		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
-			 ICIC(pd));
-		iowrite8(0xc0, ICCR(pd));
+		iic_wr(pd, ICIC,
+		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		iic_wr(pd, ICCR, 0xc0);
 		break;
 	case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
-		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
-			 ICIC(pd));
-		ret = ioread8(ICDR(pd));
-		iowrite8(0xc0, ICCR(pd));
+		iic_wr(pd, ICIC,
+		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		ret = iic_rd(pd, ICDR);
+		iic_wr(pd, ICCR, 0xc0);
 		break;
 	}
 
@@ -367,7 +383,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 	unsigned char sr;
 	int wakeup;
 
-	sr = ioread8(ICSR(pd));
+	sr = iic_rd(pd, ICSR);
 	pd->sr |= sr; /* remember state */
 
 	dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
@@ -376,7 +392,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 
 	if (sr & (ICSR_AL | ICSR_TACK)) {
 		/* don't interrupt transaction - continue to issue stop */
-		iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+		iic_wr(pd, ICSR, sr & ~(ICSR_AL | ICSR_TACK));
 		wakeup = 0;
 	} else if (pd->msg->flags & I2C_M_RD)
 		wakeup = sh_mobile_i2c_isr_rx(pd);
@@ -384,7 +400,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 		wakeup = sh_mobile_i2c_isr_tx(pd);
 
 	if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
-		iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
+		iic_wr(pd, ICSR, sr & ~ICSR_WAIT);
 
 	if (wakeup) {
 		pd->sr |= SW_DONE;
@@ -402,21 +418,21 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
 	}
 
 	/* Initialize channel registers */
-	iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, 0, ICCR_ICE);
 
 	/* Enable channel and configure rx ack */
-	iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
 
 	/* Set the clock */
-	iowrite8(pd->iccl, ICCL(pd));
-	iowrite8(pd->icch, ICCH(pd));
+	iic_wr(pd, ICCL, pd->iccl);
+	iic_wr(pd, ICCH, pd->icch);
 
 	pd->msg = usr_msg;
 	pd->pos = -1;
 	pd->sr = 0;
 
 	/* Enable all interrupts to begin with */
-	iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
+	iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
 	return 0;
 }
 
@@ -451,7 +467,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
 
 		retry_count = 1000;
 again:
-		val = ioread8(ICSR(pd));
+		val = iic_rd(pd, ICSR);
 
 		dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
 
-- 
cgit v1.2.3


From 962b6032c889ed9a5f0bdb7052d9318067a75bda Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Thu, 11 Mar 2010 10:06:02 +0000
Subject: i2c: i2c-sh_mobile support for new ICIC bits

Add support for a new version of the IIC block
found in the SH-Mobile ARM line of processors.

Prototype patch written by Nishimoto-san.
Tested on sh7377 and sh7372.

Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/i2c/busses/i2c-sh_mobile.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

(limited to 'drivers')

diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index d2fabd9dbf80..598c49acaeb5 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -119,8 +119,10 @@ struct sh_mobile_i2c_data {
 	struct i2c_adapter adap;
 
 	struct clk *clk;
+	u_int8_t icic;
 	u_int8_t iccl;
 	u_int8_t icch;
+	u_int8_t flags;
 
 	spinlock_t lock;
 	wait_queue_head_t wait;
@@ -129,6 +131,8 @@ struct sh_mobile_i2c_data {
 	int sr;
 };
 
+#define IIC_FLAG_HAS_ICIC67	(1 << 0)
+
 #define NORMAL_SPEED		100000 /* FAST_SPEED 400000 */
 
 /* Register offsets */
@@ -155,6 +159,8 @@ struct sh_mobile_i2c_data {
 #define ICSR_WAIT		0x02
 #define ICSR_DTE		0x01
 
+#define ICIC_ICCLB8		0x80
+#define ICIC_ICCHB8		0x40
 #define ICIC_ALE		0x08
 #define ICIC_TACKE		0x04
 #define ICIC_WAITE		0x02
@@ -162,6 +168,9 @@ struct sh_mobile_i2c_data {
 
 static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data)
 {
+	if (offs == ICIC)
+		data |= pd->icic;
+
 	iowrite8(data, pd->reg + offs);
 }
 
@@ -203,6 +212,14 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
 	else
 		pd->iccl = (u_int8_t)(num/denom);
 
+	/* one more bit of ICCL in ICIC */
+	if (pd->flags & IIC_FLAG_HAS_ICIC67) {
+		if ((num/denom) > 0xff)
+			pd->icic |= ICIC_ICCLB8;
+		else
+			pd->icic &= ~ICIC_ICCLB8;
+	}
+
 	/* Calculate the value for icch. From the data sheet:
 	   icch = (p clock / transfer rate) * (H / (L + H)) */
 	num = i2c_clk * 4;
@@ -212,6 +229,14 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
 	else
 		pd->icch = (u_int8_t)(num/denom);
 
+	/* one more bit of ICCH in ICIC */
+	if (pd->flags & IIC_FLAG_HAS_ICIC67) {
+		if ((num/denom) > 0xff)
+			pd->icic |= ICIC_ICCHB8;
+		else
+			pd->icic &= ~ICIC_ICCHB8;
+	}
+
 	/* Enable channel and configure rx ack */
 	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
 
@@ -592,6 +617,12 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 		goto err_irq;
 	}
 
+	/* The IIC blocks on SH-Mobile ARM processors
+	 * come with two new bits in ICIC.
+	 */
+	if (size > 0x17)
+		pd->flags |= IIC_FLAG_HAS_ICIC67;
+
 	/* Enable Runtime PM for this device.
 	 *
 	 * Also tell the Runtime PM core to ignore children
-- 
cgit v1.2.3


From 0924fada1e64f92dd89818cf3a15571cc515afd8 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Thu, 11 Mar 2010 10:06:15 +0000
Subject: i2c: i2c-sh_mobile kconfig update for SH-Mobile ARM

Update the Kconfig entry for the i2c-sh_mobile driver to
enable build on SH-Mobile ARM platforms

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/i2c/busses/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 9c6170cd9aac..41b0754eaf62 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -529,7 +529,7 @@ config I2C_SH7760
 
 config I2C_SH_MOBILE
 	tristate "SuperH Mobile I2C Controller"
-	depends on SUPERH
+	depends on SUPERH || ARCH_SHMOBILE
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Renesas SH-Mobile processor.
-- 
cgit v1.2.3


From e47bb515c57853c1f41474dae199cb033e747f66 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Wed, 12 May 2010 14:21:24 +0000
Subject: ARM: mach-shmobile: Use shared clock framework

Teach SH-Mobile ARM how to make use of the shared SH clock
framework. This commit is one atomic switch that dumps the
local hackery and instead links in the shared clock framework
code in drivers/sh. A few local functions are kept in clock.c.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/Makefile | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
index 78bb5127abd0..08fc653a825c 100644
--- a/drivers/sh/Makefile
+++ b/drivers/sh/Makefile
@@ -1,9 +1,10 @@
 #
 # Makefile for the SuperH specific drivers.
 #
+obj-y	:= clk.o intc.o
+
 obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
 obj-$(CONFIG_MAPLE)		+= maple/
+
 obj-$(CONFIG_GENERIC_GPIO)	+= pfc.o
-obj-$(CONFIG_SUPERH)		+= clk.o
 obj-$(CONFIG_SH_CLK_CPG)	+= clk-cpg.o
-obj-y				+= intc.o
-- 
cgit v1.2.3


From 9fd04fe34af36344f61ebb24cc653726c231356e Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Sun, 23 May 2010 14:00:43 +0000
Subject: sh-mobile: add support for displays, connected over the MIPI bus

Some SH-mobile SoCs have a MIPI DSI controller, that can be used to connect
MIPI displays to LCDC. This patch adds a platform driver for SH-mobile MIPI DSI
unit. It uses existing hooks in the sh_mobile_lcdcfb.c driver for display
activation and deactivation.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/Kconfig       |   8 +
 drivers/video/Makefile      |   1 +
 drivers/video/sh_mipi_dsi.c | 505 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 514 insertions(+)
 create mode 100644 drivers/video/sh_mipi_dsi.c

(limited to 'drivers')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6e16244f3ed1..773c4a68de89 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1879,6 +1879,13 @@ config FB_W100
 
 	  If unsure, say N.
 
+config SH_MIPI_DSI
+	tristate
+	depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+
+config SH_LCD_MIPI_DSI
+	bool
+
 config FB_SH_MOBILE_LCDC
 	tristate "SuperH Mobile LCDC framebuffer support"
 	depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
@@ -1887,6 +1894,7 @@ config FB_SH_MOBILE_LCDC
 	select FB_SYS_IMAGEBLIT
 	select FB_SYS_FOPS
 	select FB_DEFERRED_IO
+	select SH_MIPI_DSI if SH_LCD_MIPI_DSI
 	---help---
 	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
 
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index ddc2af2ba45b..3c3bf867ef18 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
 obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
+obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-y                             += omap2/
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
new file mode 100644
index 000000000000..017ae9f47d36
--- /dev/null
+++ b/drivers/video/sh_mipi_dsi.c
@@ -0,0 +1,505 @@
+/*
+ * Renesas SH-mobile MIPI DSI support
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <video/mipi_display.h>
+#include <video/sh_mipi_dsi.h>
+#include <video/sh_mobile_lcdc.h>
+
+#define CMTSRTCTR	0x80d0
+#define CMTSRTREQ	0x8070
+
+#define DSIINTE		0x0060
+
+/* E.g., sh7372 has 2 MIPI-DSIs - one for each LCDC */
+#define MAX_SH_MIPI_DSI 2
+
+struct sh_mipi {
+	void __iomem	*base;
+	struct clk	*dsit_clk;
+	struct clk	*dsip_clk;
+};
+
+static struct sh_mipi *mipi_dsi[MAX_SH_MIPI_DSI];
+
+/* Protect the above array */
+static DEFINE_MUTEX(array_lock);
+
+static struct sh_mipi *sh_mipi_by_handle(int handle)
+{
+	if (handle >= ARRAY_SIZE(mipi_dsi) || handle < 0)
+		return NULL;
+
+	return mipi_dsi[handle];
+}
+
+static int sh_mipi_send_short(struct sh_mipi *mipi, u8 dsi_cmd,
+			      u8 cmd, u8 param)
+{
+	u32 data = (dsi_cmd << 24) | (cmd << 16) | (param << 8);
+	int cnt = 100;
+
+	/* transmit a short packet to LCD panel */
+	iowrite32(1 | data, mipi->base + 0x80d0); /* CMTSRTCTR */
+	iowrite32(1, mipi->base + 0x8070); /* CMTSRTREQ */
+
+	while ((ioread32(mipi->base + 0x8070) & 1) && --cnt)
+		udelay(1);
+
+	return cnt ? 0 : -ETIMEDOUT;
+}
+
+#define LCD_CHAN2MIPI(c) ((c) < LCDC_CHAN_MAINLCD || (c) > LCDC_CHAN_SUBLCD ? \
+				-EINVAL : (c) - 1)
+
+static int sh_mipi_dcs(int handle, u8 cmd)
+{
+	struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle));
+	if (!mipi)
+		return -ENODEV;
+	return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE, cmd, 0);
+}
+
+static int sh_mipi_dcs_param(int handle, u8 cmd, u8 param)
+{
+	struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle));
+	if (!mipi)
+		return -ENODEV;
+	return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE_PARAM, cmd,
+				  param);
+}
+
+static void sh_mipi_dsi_enable(struct sh_mipi *mipi, bool enable)
+{
+	/*
+	 * enable LCDC data tx, transition to LPS after completion of each HS
+	 * packet
+	 */
+	iowrite32(0x00000002 | enable, mipi->base + 0x8000); /* DTCTR */
+}
+
+static void sh_mipi_shutdown(struct platform_device *pdev)
+{
+	struct sh_mipi *mipi = platform_get_drvdata(pdev);
+
+	sh_mipi_dsi_enable(mipi, false);
+}
+
+static void mipi_display_on(void *arg)
+{
+	struct sh_mipi *mipi = arg;
+
+	sh_mipi_dsi_enable(mipi, true);
+}
+
+static void mipi_display_off(void *arg)
+{
+	struct sh_mipi *mipi = arg;
+
+	sh_mipi_dsi_enable(mipi, false);
+}
+
+static int __init sh_mipi_setup(struct sh_mipi *mipi,
+				struct sh_mipi_dsi_info *pdata)
+{
+	void __iomem *base = mipi->base;
+	struct sh_mobile_lcdc_chan_cfg *ch = pdata->lcd_chan;
+	u32 pctype, datatype, pixfmt;
+	u32 linelength;
+	bool yuv;
+
+	/* Select data format */
+	switch (pdata->data_format) {
+	case MIPI_RGB888:
+		pctype = 0;
+		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
+		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+		linelength = ch->lcd_cfg.xres * 3;
+		yuv = false;
+		break;
+	case MIPI_RGB565:
+		pctype = 1;
+		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
+		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+		linelength = ch->lcd_cfg.xres * 2;
+		yuv = false;
+		break;
+	case MIPI_RGB666_LP:
+		pctype = 2;
+		datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
+		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+		linelength = ch->lcd_cfg.xres * 3;
+		yuv = false;
+		break;
+	case MIPI_RGB666:
+		pctype = 3;
+		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
+		pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
+		linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
+		yuv = false;
+		break;
+	case MIPI_BGR888:
+		pctype = 8;
+		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
+		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+		linelength = ch->lcd_cfg.xres * 3;
+		yuv = false;
+		break;
+	case MIPI_BGR565:
+		pctype = 9;
+		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
+		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+		linelength = ch->lcd_cfg.xres * 2;
+		yuv = false;
+		break;
+	case MIPI_BGR666_LP:
+		pctype = 0xa;
+		datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
+		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+		linelength = ch->lcd_cfg.xres * 3;
+		yuv = false;
+		break;
+	case MIPI_BGR666:
+		pctype = 0xb;
+		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
+		pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
+		linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
+		yuv = false;
+		break;
+	case MIPI_YUYV:
+		pctype = 4;
+		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
+		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+		linelength = ch->lcd_cfg.xres * 2;
+		yuv = true;
+		break;
+	case MIPI_UYVY:
+		pctype = 5;
+		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
+		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+		linelength = ch->lcd_cfg.xres * 2;
+		yuv = true;
+		break;
+	case MIPI_YUV420_L:
+		pctype = 6;
+		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
+		pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
+		linelength = (ch->lcd_cfg.xres * 12 + 7) / 8;
+		yuv = true;
+		break;
+	case MIPI_YUV420:
+		pctype = 7;
+		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
+		pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
+		/* Length of U/V line */
+		linelength = (ch->lcd_cfg.xres + 1) / 2;
+		yuv = true;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if ((yuv && ch->interface_type != YUV422) ||
+	    (!yuv && ch->interface_type != RGB24))
+		return -EINVAL;
+
+	/* reset DSI link */
+	iowrite32(0x00000001, base); /* SYSCTRL */
+	/* Hold reset for 100 cycles of the slowest of bus, HS byte and LP clock */
+	udelay(50);
+	iowrite32(0x00000000, base); /* SYSCTRL */
+
+	/* setup DSI link */
+
+	/*
+	 * Default = ULPS enable |
+	 *	Contention detection enabled |
+	 *	EoT packet transmission enable |
+	 *	CRC check enable |
+	 *	ECC check enable
+	 * additionally enable first two lanes
+	 */
+	iowrite32(0x00003703, base + 0x04); /* SYSCONF */
+	/*
+	 * T_wakeup = 0x7000
+	 * T_hs-trail = 3
+	 * T_hs-prepare = 3
+	 * T_clk-trail = 3
+	 * T_clk-prepare = 2
+	 */
+	iowrite32(0x70003332, base + 0x08); /* TIMSET */
+	/* no responses requested */
+	iowrite32(0x00000000, base + 0x18); /* RESREQSET0 */
+	/* request response to packets of type 0x28 */
+	iowrite32(0x00000100, base + 0x1c); /* RESREQSET1 */
+	/* High-speed transmission timeout, default 0xffffffff */
+	iowrite32(0x0fffffff, base + 0x20); /* HSTTOVSET */
+	/* LP reception timeout, default 0xffffffff */
+	iowrite32(0x0fffffff, base + 0x24); /* LPRTOVSET */
+	/* Turn-around timeout, default 0xffffffff */
+	iowrite32(0x0fffffff, base + 0x28); /* TATOVSET */
+	/* Peripheral reset timeout, default 0xffffffff */
+	iowrite32(0x0fffffff, base + 0x2c); /* PRTOVSET */
+	/* Enable timeout counters */
+	iowrite32(0x00000f00, base + 0x30); /* DSICTRL */
+	/* Interrupts not used, disable all */
+	iowrite32(0, base + DSIINTE);
+	/* DSI-Tx bias on */
+	iowrite32(0x00000001, base + 0x70); /* PHYCTRL */
+	udelay(200);
+	/* Deassert resets, power on, set multiplier */
+	iowrite32(0x03070b01, base + 0x70); /* PHYCTRL */
+
+	/* setup l-bridge */
+
+	/*
+	 * Enable transmission of all packets,
+	 * transmit LPS after each HS packet completion
+	 */
+	iowrite32(0x00000006, base + 0x8000); /* DTCTR */
+	/* VSYNC width = 2 (<< 17) */
+	iowrite32(0x00040000 | (pctype << 12) | datatype, base + 0x8020); /* VMCTR1 */
+	/*
+	 * Non-burst mode with sync pulses: VSE and HSE are output,
+	 * HSA period allowed, no commands in LP
+	 */
+	iowrite32(0x00e00000, base + 0x8024); /* VMCTR2 */
+	/*
+	 * 0x660 = 1632 bytes per line (RGB24, 544 pixels: see
+	 * sh_mobile_lcdc_info.ch[0].lcd_cfg.xres), HSALEN = 1 - default
+	 * (unused, since VMCTR2[HSABM] = 0)
+	 */
+	iowrite32(1 | (linelength << 16), base + 0x8028); /* VMLEN1 */
+
+	msleep(5);
+
+	/* setup LCD panel */
+
+	/* cf. drivers/video/omap/lcd_mipid.c */
+	sh_mipi_dcs(ch->chan, MIPI_DCS_EXIT_SLEEP_MODE);
+	msleep(120);
+	/*
+	 * [7] - Page Address Mode
+	 * [6] - Column Address Mode
+	 * [5] - Page / Column Address Mode
+	 * [4] - Display Device Line Refresh Order
+	 * [3] - RGB/BGR Order
+	 * [2] - Display Data Latch Data Order
+	 * [1] - Flip Horizontal
+	 * [0] - Flip Vertical
+	 */
+	sh_mipi_dcs_param(ch->chan, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
+	/* cf. set_data_lines() */
+	sh_mipi_dcs_param(ch->chan, MIPI_DCS_SET_PIXEL_FORMAT,
+			  pixfmt << 4);
+	sh_mipi_dcs(ch->chan, MIPI_DCS_SET_DISPLAY_ON);
+
+	return 0;
+}
+
+static int __init sh_mipi_probe(struct platform_device *pdev)
+{
+	struct sh_mipi *mipi;
+	struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	unsigned long rate, f_current;
+	int idx = pdev->id, ret;
+	char dsip_clk[] = "dsi.p_clk";
+
+	if (!res || idx >= ARRAY_SIZE(mipi_dsi) || !pdata)
+		return -ENODEV;
+
+	mutex_lock(&array_lock);
+	if (idx < 0)
+		for (idx = 0; idx < ARRAY_SIZE(mipi_dsi) && mipi_dsi[idx]; idx++)
+			;
+
+	if (idx == ARRAY_SIZE(mipi_dsi)) {
+		ret = -EBUSY;
+		goto efindslot;
+	}
+
+	mipi = kzalloc(sizeof(*mipi), GFP_KERNEL);
+	if (!mipi) {
+		ret = -ENOMEM;
+		goto ealloc;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		dev_err(&pdev->dev, "MIPI register region already claimed\n");
+		ret = -EBUSY;
+		goto ereqreg;
+	}
+
+	mipi->base = ioremap(res->start, resource_size(res));
+	if (!mipi->base) {
+		ret = -ENOMEM;
+		goto emap;
+	}
+
+	mipi->dsit_clk = clk_get(&pdev->dev, "dsit_clk");
+	if (IS_ERR(mipi->dsit_clk)) {
+		ret = PTR_ERR(mipi->dsit_clk);
+		goto eclktget;
+	}
+
+	f_current = clk_get_rate(mipi->dsit_clk);
+	/* 80MHz required by the datasheet */
+	rate = clk_round_rate(mipi->dsit_clk, 80000000);
+	if (rate > 0 && rate != f_current)
+		ret = clk_set_rate(mipi->dsit_clk, rate);
+	else
+		ret = rate;
+	if (ret < 0)
+		goto esettrate;
+
+	dev_dbg(&pdev->dev, "DSI-T clk %lu -> %lu\n", f_current, rate);
+
+	sprintf(dsip_clk, "dsi%1.1dp_clk", idx);
+	mipi->dsip_clk = clk_get(&pdev->dev, dsip_clk);
+	if (IS_ERR(mipi->dsip_clk)) {
+		ret = PTR_ERR(mipi->dsip_clk);
+		goto eclkpget;
+	}
+
+	f_current = clk_get_rate(mipi->dsip_clk);
+	/* Between 10 and 50MHz */
+	rate = clk_round_rate(mipi->dsip_clk, 24000000);
+	if (rate > 0 && rate != f_current)
+		ret = clk_set_rate(mipi->dsip_clk, rate);
+	else
+		ret = rate;
+	if (ret < 0)
+		goto esetprate;
+
+	dev_dbg(&pdev->dev, "DSI-P clk %lu -> %lu\n", f_current, rate);
+
+	msleep(10);
+
+	ret = clk_enable(mipi->dsit_clk);
+	if (ret < 0)
+		goto eclkton;
+
+	ret = clk_enable(mipi->dsip_clk);
+	if (ret < 0)
+		goto eclkpon;
+
+	mipi_dsi[idx] = mipi;
+
+	ret = sh_mipi_setup(mipi, pdata);
+	if (ret < 0)
+		goto emipisetup;
+
+	mutex_unlock(&array_lock);
+	platform_set_drvdata(pdev, mipi);
+
+	/* Set up LCDC callbacks */
+	pdata->lcd_chan->board_cfg.board_data = mipi;
+	pdata->lcd_chan->board_cfg.display_on = mipi_display_on;
+	pdata->lcd_chan->board_cfg.display_off = mipi_display_off;
+
+	return 0;
+
+emipisetup:
+	mipi_dsi[idx] = NULL;
+	clk_disable(mipi->dsip_clk);
+eclkpon:
+	clk_disable(mipi->dsit_clk);
+eclkton:
+esetprate:
+	clk_put(mipi->dsip_clk);
+eclkpget:
+esettrate:
+	clk_put(mipi->dsit_clk);
+eclktget:
+	iounmap(mipi->base);
+emap:
+	release_mem_region(res->start, resource_size(res));
+ereqreg:
+	kfree(mipi);
+ealloc:
+efindslot:
+	mutex_unlock(&array_lock);
+
+	return ret;
+}
+
+static int __exit sh_mipi_remove(struct platform_device *pdev)
+{
+	struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct sh_mipi *mipi = platform_get_drvdata(pdev);
+	int i, ret;
+
+	mutex_lock(&array_lock);
+
+	for (i = 0; i < ARRAY_SIZE(mipi_dsi) && mipi_dsi[i] != mipi; i++)
+		;
+
+	if (i == ARRAY_SIZE(mipi_dsi)) {
+		ret = -EINVAL;
+	} else {
+		ret = 0;
+		mipi_dsi[i] = NULL;
+	}
+
+	mutex_unlock(&array_lock);
+
+	if (ret < 0)
+		return ret;
+
+	pdata->lcd_chan->board_cfg.display_on = NULL;
+	pdata->lcd_chan->board_cfg.display_off = NULL;
+	pdata->lcd_chan->board_cfg.board_data = NULL;
+
+	clk_disable(mipi->dsip_clk);
+	clk_disable(mipi->dsit_clk);
+	clk_put(mipi->dsit_clk);
+	clk_put(mipi->dsip_clk);
+	iounmap(mipi->base);
+	if (res)
+		release_mem_region(res->start, resource_size(res));
+	platform_set_drvdata(pdev, NULL);
+	kfree(mipi);
+
+	return 0;
+}
+
+static struct platform_driver sh_mipi_driver = {
+	.remove		= __exit_p(sh_mipi_remove),
+	.shutdown	= sh_mipi_shutdown,
+	.driver = {
+		.name	= "sh-mipi-dsi",
+	},
+};
+
+static int __init sh_mipi_init(void)
+{
+	return platform_driver_probe(&sh_mipi_driver, sh_mipi_probe);
+}
+module_init(sh_mipi_init);
+
+static void __exit sh_mipi_exit(void)
+{
+	platform_driver_unregister(&sh_mipi_driver);
+}
+module_exit(sh_mipi_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_DESCRIPTION("SuperH / ARM-shmobile MIPI DSI driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From d1d4b10cdafb8dd4044a3b67b05f759047612fdc Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Sun, 23 May 2010 16:39:09 +0000
Subject: serial: sh-sci: fix handling of SCIFB sh-mobile ports

SCIFB ports have a slightly different register layout and a different FIFO
size from SCIFA ports, in DMA mode they have to be treated just like SCIFA.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/serial/sh-sci.c | 42 ++++++++++++++++++++++++++++++++++--------
 drivers/serial/sh-sci.h | 29 +++++++++++++++++++++++------
 2 files changed, 57 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 4f73fb756745..aaef223df676 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -346,6 +346,27 @@ static int scif_rxfill(struct uart_port *port)
 		return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
 	}
 }
+#elif defined(CONFIG_ARCH_SH7372)
+static int scif_txfill(struct uart_port *port)
+{
+	if (port->type == PORT_SCIFA)
+		return sci_in(port, SCFDR) >> 8;
+	else
+		return sci_in(port, SCTFDR);
+}
+
+static int scif_txroom(struct uart_port *port)
+{
+	return port->fifosize - scif_txfill(port);
+}
+
+static int scif_rxfill(struct uart_port *port)
+{
+	if (port->type == PORT_SCIFA)
+		return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
+	else
+		return sci_in(port, SCRFDR);
+}
 #else
 static int scif_txfill(struct uart_port *port)
 {
@@ -683,7 +704,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 		u16 ssr = sci_in(port, SCxSR);
 
 		/* Disable future Rx interrupts */
-		if (port->type == PORT_SCIFA) {
+		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 			disable_irq_nosync(irq);
 			scr |= 0x4000;
 		} else {
@@ -928,7 +949,7 @@ static void sci_dma_tx_complete(void *arg)
 
 	if (!uart_circ_empty(xmit)) {
 		schedule_work(&s->work_tx);
-	} else if (port->type == PORT_SCIFA) {
+	} else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 		u16 ctrl = sci_in(port, SCSCR);
 		sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE);
 	}
@@ -1183,7 +1204,7 @@ static void sci_start_tx(struct uart_port *port)
 	unsigned short ctrl;
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
-	if (port->type == PORT_SCIFA) {
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 		u16 new, scr = sci_in(port, SCSCR);
 		if (s->chan_tx)
 			new = scr | 0x8000;
@@ -1196,7 +1217,7 @@ static void sci_start_tx(struct uart_port *port)
 	    s->cookie_tx < 0)
 		schedule_work(&s->work_tx);
 #endif
-	if (!s->chan_tx || port->type == PORT_SCIFA) {
+	if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 		/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
 		ctrl = sci_in(port, SCSCR);
 		sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE);
@@ -1209,7 +1230,7 @@ static void sci_stop_tx(struct uart_port *port)
 
 	/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
-	if (port->type == PORT_SCIFA)
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
 		ctrl &= ~0x8000;
 	ctrl &= ~SCI_CTRL_FLAGS_TIE;
 	sci_out(port, SCSCR, ctrl);
@@ -1221,7 +1242,7 @@ static void sci_start_rx(struct uart_port *port)
 
 	/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
 	ctrl |= sci_in(port, SCSCR);
-	if (port->type == PORT_SCIFA)
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
 		ctrl &= ~0x4000;
 	sci_out(port, SCSCR, ctrl);
 }
@@ -1232,7 +1253,7 @@ static void sci_stop_rx(struct uart_port *port)
 
 	/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
-	if (port->type == PORT_SCIFA)
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
 		ctrl &= ~0x4000;
 	ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
 	sci_out(port, SCSCR, ctrl);
@@ -1270,7 +1291,7 @@ static void rx_timer_fn(unsigned long arg)
 	struct uart_port *port = &s->port;
 	u16 scr = sci_in(port, SCSCR);
 
-	if (port->type == PORT_SCIFA) {
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 		scr &= ~0x4000;
 		enable_irq(s->irqs[1]);
 	}
@@ -1523,6 +1544,8 @@ static const char *sci_type(struct uart_port *port)
 		return "scif";
 	case PORT_SCIFA:
 		return "scifa";
+	case PORT_SCIFB:
+		return "scifb";
 	}
 
 	return NULL;
@@ -1611,6 +1634,9 @@ static int __devinit sci_init_single(struct platform_device *dev,
 	port->line	= index;
 
 	switch (p->type) {
+	case PORT_SCIFB:
+		port->fifosize = 256;
+		break;
 	case PORT_SCIFA:
 		port->fifosize = 64;
 		break;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index f70c49f915fa..9b52f77a9305 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -322,7 +322,7 @@
 #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
   static inline unsigned int sci_##name##_in(struct uart_port *port)	\
   {									\
-    if (port->type == PORT_SCIF) {					\
+    if (port->type == PORT_SCIF || port->type == PORT_SCIFB) {		\
       SCI_IN(scif_size, scif_offset)					\
     } else {	/* PORT_SCI or PORT_SCIFA */				\
       SCI_IN(sci_size, sci_offset);					\
@@ -330,7 +330,7 @@
   }									\
   static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
   {									\
-    if (port->type == PORT_SCIF) {					\
+    if (port->type == PORT_SCIF || port->type == PORT_SCIFB) {		\
       SCI_OUT(scif_size, scif_offset, value)				\
     } else {	/* PORT_SCI or PORT_SCIFA */				\
       SCI_OUT(sci_size, sci_offset, value);				\
@@ -384,8 +384,12 @@
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721) || \
       defined(CONFIG_ARCH_SH7367) || \
-      defined(CONFIG_ARCH_SH7377) || \
-      defined(CONFIG_ARCH_SH7372)
+      defined(CONFIG_ARCH_SH7377)
+#define SCIF_FNS(name, scif_offset, scif_size) \
+  CPU_SCIF_FNS(name, scif_offset, scif_size)
+#elif defined(CONFIG_ARCH_SH7372)
+#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \
+  CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size)
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -422,8 +426,7 @@
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
     defined(CONFIG_ARCH_SH7367) || \
-    defined(CONFIG_ARCH_SH7377) || \
-    defined(CONFIG_ARCH_SH7372)
+    defined(CONFIG_ARCH_SH7377)
 
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
@@ -436,6 +439,20 @@ SCIF_FNS(SCFDR,  0x1c, 16)
 SCIF_FNS(SCxTDR, 0x20,  8)
 SCIF_FNS(SCxRDR, 0x24,  8)
 SCIF_FNS(SCLSR,  0x00,  0)
+#elif defined(CONFIG_ARCH_SH7372)
+SCIF_FNS(SCSMR,  0x00, 16)
+SCIF_FNS(SCBRR,  0x04,  8)
+SCIF_FNS(SCSCR,  0x08, 16)
+SCIF_FNS(SCTDSR, 0x0c, 16)
+SCIF_FNS(SCFER,  0x10, 16)
+SCIF_FNS(SCxSR,  0x14, 16)
+SCIF_FNS(SCFCR,  0x18, 16)
+SCIF_FNS(SCFDR,  0x1c, 16)
+SCIF_FNS(SCTFDR, 0x38, 16)
+SCIF_FNS(SCRFDR, 0x3c, 16)
+SCIx_FNS(SCxTDR, 0x20,  8, 0x40,  8)
+SCIx_FNS(SCxRDR, 0x24,  8, 0x60,  8)
+SCIF_FNS(SCLSR,  0x00,  0)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
       defined(CONFIG_CPU_SUBTYPE_SH7724)
 SCIx_FNS(SCSMR,  0x00, 16, 0x00, 16)
-- 
cgit v1.2.3


From 2dc6c6f15da97cb3e810963c80e981f19d42cd7d Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Fri, 21 May 2010 03:12:44 +0200
Subject: [ARM] pata_pxa: DMA-capable PATA driver

This patch adds a driver for a harddrive attached to PXA address and data bus.
Unlike pata_platform, this driver allows usage of PXA DMA controller, making the
transmission speed 3x higher.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 drivers/ata/Kconfig    |  11 ++
 drivers/ata/Makefile   |   2 +
 drivers/ata/pata_pxa.c | 411 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 424 insertions(+)
 create mode 100644 drivers/ata/pata_pxa.c

(limited to 'drivers')

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index aa85a98d3a4f..25e030f9a3e6 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -642,6 +642,17 @@ config PATA_VIA
 
 	  If unsure, say N.
 
+config PATA_PXA
+	tristate "PXA DMA-capable PATA support"
+	depends on ARCH_PXA
+	help
+	  This option enables support for harddrive attached to PXA CPU's bus.
+
+	  NOTE: This driver utilizes PXA DMA controller, in case your hardware
+	        is not capable of doing MWDMA, use pata_platform instead.
+
+	  If unsure, say N.
+
 config PATA_WINBOND
 	tristate "Winbond SL82C105 PATA support"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 7ef89d73df63..e87d644b8ed2 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -89,6 +89,8 @@ obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
 obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
 obj-$(CONFIG_PATA_WINBOND_VLB)	+= pata_winbond.o
 
+obj-$(CONFIG_PATA_PXA)		+= pata_pxa.o
+
 # Should be last but two libata driver
 obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
 # Should be last but one libata driver
diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
new file mode 100644
index 000000000000..1898c6ed4b4e
--- /dev/null
+++ b/drivers/ata/pata_pxa.c
@@ -0,0 +1,411 @@
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+
+#include <scsi/scsi_host.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/pata_pxa.h>
+#include <mach/dma.h>
+
+#define DRV_NAME	"pata_pxa"
+#define DRV_VERSION	"0.1"
+
+struct pata_pxa_data {
+	uint32_t		dma_channel;
+	struct pxa_dma_desc	*dma_desc;
+	dma_addr_t		dma_desc_addr;
+	uint32_t		dma_desc_id;
+
+	/* DMA IO physical address */
+	uint32_t		dma_io_addr;
+	/* PXA DREQ<0:2> pin selector */
+	uint32_t		dma_dreq;
+	/* DMA DCSR register value */
+	uint32_t		dma_dcsr;
+
+	struct completion	dma_done;
+};
+
+/*
+ * Setup the DMA descriptors. The size is transfer capped at 4k per descriptor,
+ * if the transfer is longer, it is split into multiple chained descriptors.
+ */
+static void pxa_load_dmac(struct scatterlist *sg, struct ata_queued_cmd *qc)
+{
+	struct pata_pxa_data *pd = qc->ap->private_data;
+
+	uint32_t cpu_len, seg_len;
+	dma_addr_t cpu_addr;
+
+	cpu_addr = sg_dma_address(sg);
+	cpu_len = sg_dma_len(sg);
+
+	do {
+		seg_len = (cpu_len > 0x1000) ? 0x1000 : cpu_len;
+
+		pd->dma_desc[pd->dma_desc_id].ddadr = pd->dma_desc_addr +
+			((pd->dma_desc_id + 1) * sizeof(struct pxa_dma_desc));
+
+		pd->dma_desc[pd->dma_desc_id].dcmd = DCMD_BURST32 |
+					DCMD_WIDTH2 | (DCMD_LENGTH & seg_len);
+
+		if (qc->tf.flags & ATA_TFLAG_WRITE) {
+			pd->dma_desc[pd->dma_desc_id].dsadr = cpu_addr;
+			pd->dma_desc[pd->dma_desc_id].dtadr = pd->dma_io_addr;
+			pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCSRCADDR |
+						DCMD_FLOWTRG;
+		} else {
+			pd->dma_desc[pd->dma_desc_id].dsadr = pd->dma_io_addr;
+			pd->dma_desc[pd->dma_desc_id].dtadr = cpu_addr;
+			pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCTRGADDR |
+						DCMD_FLOWSRC;
+		}
+
+		cpu_len -= seg_len;
+		cpu_addr += seg_len;
+		pd->dma_desc_id++;
+
+	} while (cpu_len);
+
+	/* Should not happen */
+	if (seg_len & 0x1f)
+		DALGN |= (1 << pd->dma_dreq);
+}
+
+/*
+ * Prepare taskfile for submission.
+ */
+static void pxa_qc_prep(struct ata_queued_cmd *qc)
+{
+	struct pata_pxa_data *pd = qc->ap->private_data;
+	int si = 0;
+	struct scatterlist *sg;
+
+	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+		return;
+
+	pd->dma_desc_id = 0;
+
+	DCSR(pd->dma_channel) = 0;
+	DALGN &= ~(1 << pd->dma_dreq);
+
+	for_each_sg(qc->sg, sg, qc->n_elem, si)
+		pxa_load_dmac(sg, qc);
+
+	pd->dma_desc[pd->dma_desc_id - 1].ddadr = DDADR_STOP;
+
+	/* Fire IRQ only at the end of last block */
+	pd->dma_desc[pd->dma_desc_id - 1].dcmd |= DCMD_ENDIRQEN;
+
+	DDADR(pd->dma_channel) = pd->dma_desc_addr;
+	DRCMR(pd->dma_dreq) = DRCMR_MAPVLD | pd->dma_channel;
+
+}
+
+/*
+ * Configure the DMA controller, load the DMA descriptors, but don't start the
+ * DMA controller yet. Only issue the ATA command.
+ */
+static void pxa_bmdma_setup(struct ata_queued_cmd *qc)
+{
+	qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
+}
+
+/*
+ * Execute the DMA transfer.
+ */
+static void pxa_bmdma_start(struct ata_queued_cmd *qc)
+{
+	struct pata_pxa_data *pd = qc->ap->private_data;
+	init_completion(&pd->dma_done);
+	DCSR(pd->dma_channel) = DCSR_RUN;
+}
+
+/*
+ * Wait until the DMA transfer completes, then stop the DMA controller.
+ */
+static void pxa_bmdma_stop(struct ata_queued_cmd *qc)
+{
+	struct pata_pxa_data *pd = qc->ap->private_data;
+
+	if ((DCSR(pd->dma_channel) & DCSR_RUN) &&
+		wait_for_completion_timeout(&pd->dma_done, HZ))
+		dev_err(qc->ap->dev, "Timeout waiting for DMA completion!");
+
+	DCSR(pd->dma_channel) = 0;
+}
+
+/*
+ * Read DMA status. The bmdma_stop() will take care of properly finishing the
+ * DMA transfer so we always have DMA-complete interrupt here.
+ */
+static unsigned char pxa_bmdma_status(struct ata_port *ap)
+{
+	struct pata_pxa_data *pd = ap->private_data;
+	unsigned char ret = ATA_DMA_INTR;
+
+	if (pd->dma_dcsr & DCSR_BUSERR)
+		ret |= ATA_DMA_ERR;
+
+	return ret;
+}
+
+/*
+ * No IRQ register present so we do nothing.
+ */
+static void pxa_irq_clear(struct ata_port *ap)
+{
+}
+
+/*
+ * Check for ATAPI DMA. ATAPI DMA is unsupported by this driver. It's still
+ * unclear why ATAPI has DMA issues.
+ */
+static int pxa_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+	return -EOPNOTSUPP;
+}
+
+static struct scsi_host_template pxa_ata_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pxa_ata_port_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= ata_cable_40wire,
+
+	.bmdma_setup		= pxa_bmdma_setup,
+	.bmdma_start		= pxa_bmdma_start,
+	.bmdma_stop		= pxa_bmdma_stop,
+	.bmdma_status		= pxa_bmdma_status,
+
+	.check_atapi_dma	= pxa_check_atapi_dma,
+
+	.sff_irq_clear		= pxa_irq_clear,
+
+	.qc_prep		= pxa_qc_prep,
+};
+
+/*
+ * DMA interrupt handler.
+ */
+static void pxa_ata_dma_irq(int dma, void *port)
+{
+	struct ata_port *ap = port;
+	struct pata_pxa_data *pd = ap->private_data;
+
+	pd->dma_dcsr = DCSR(dma);
+	DCSR(dma) = pd->dma_dcsr;
+
+	if (pd->dma_dcsr & DCSR_STOPSTATE)
+		complete(&pd->dma_done);
+}
+
+static int __devinit pxa_ata_probe(struct platform_device *pdev)
+{
+	struct ata_host *host;
+	struct ata_port *ap;
+	struct pata_pxa_data *data;
+	struct resource *cmd_res;
+	struct resource *ctl_res;
+	struct resource *dma_res;
+	struct resource *irq_res;
+	struct pata_pxa_pdata *pdata = pdev->dev.platform_data;
+	int ret = 0;
+
+	/*
+	 * Resource validation, three resources are needed:
+	 *  - CMD port base address
+	 *  - CTL port base address
+	 *  - DMA port base address
+	 *  - IRQ pin
+	 */
+	if (pdev->num_resources != 4) {
+		dev_err(&pdev->dev, "invalid number of resources\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * CMD port base address
+	 */
+	cmd_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(cmd_res == NULL))
+		return -EINVAL;
+
+	/*
+	 * CTL port base address
+	 */
+	ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (unlikely(ctl_res == NULL))
+		return -EINVAL;
+
+	/*
+	 * DMA port base address
+	 */
+	dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (unlikely(dma_res == NULL))
+		return -EINVAL;
+
+	/*
+	 * IRQ pin
+	 */
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (unlikely(irq_res == NULL))
+		return -EINVAL;
+
+	/*
+	 * Allocate the host
+	 */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	ap		= host->ports[0];
+	ap->ops		= &pxa_ata_port_ops;
+	ap->pio_mask	= ATA_PIO4;
+	ap->mwdma_mask	= ATA_MWDMA2;
+	ap->flags	= ATA_FLAG_MMIO;
+
+	ap->ioaddr.cmd_addr	= devm_ioremap(&pdev->dev, cmd_res->start,
+						resource_size(cmd_res));
+	ap->ioaddr.ctl_addr	= devm_ioremap(&pdev->dev, ctl_res->start,
+						resource_size(ctl_res));
+	ap->ioaddr.bmdma_addr	= devm_ioremap(&pdev->dev, dma_res->start,
+						resource_size(dma_res));
+
+	/*
+	 * Adjust register offsets
+	 */
+	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+	ap->ioaddr.data_addr	= ap->ioaddr.cmd_addr +
+					(ATA_REG_DATA << pdata->reg_shift);
+	ap->ioaddr.error_addr	= ap->ioaddr.cmd_addr +
+					(ATA_REG_ERR << pdata->reg_shift);
+	ap->ioaddr.feature_addr	= ap->ioaddr.cmd_addr +
+					(ATA_REG_FEATURE << pdata->reg_shift);
+	ap->ioaddr.nsect_addr	= ap->ioaddr.cmd_addr +
+					(ATA_REG_NSECT << pdata->reg_shift);
+	ap->ioaddr.lbal_addr	= ap->ioaddr.cmd_addr +
+					(ATA_REG_LBAL << pdata->reg_shift);
+	ap->ioaddr.lbam_addr	= ap->ioaddr.cmd_addr +
+					(ATA_REG_LBAM << pdata->reg_shift);
+	ap->ioaddr.lbah_addr	= ap->ioaddr.cmd_addr +
+					(ATA_REG_LBAH << pdata->reg_shift);
+	ap->ioaddr.device_addr	= ap->ioaddr.cmd_addr +
+					(ATA_REG_DEVICE << pdata->reg_shift);
+	ap->ioaddr.status_addr	= ap->ioaddr.cmd_addr +
+					(ATA_REG_STATUS << pdata->reg_shift);
+	ap->ioaddr.command_addr	= ap->ioaddr.cmd_addr +
+					(ATA_REG_CMD << pdata->reg_shift);
+
+	/*
+	 * Allocate and load driver's internal data structure
+	 */
+	data = devm_kzalloc(&pdev->dev, sizeof(struct pata_pxa_data),
+								GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	ap->private_data = data;
+	data->dma_dreq = pdata->dma_dreq;
+	data->dma_io_addr = dma_res->start;
+
+	/*
+	 * Allocate space for the DMA descriptors
+	 */
+	data->dma_desc = dmam_alloc_coherent(&pdev->dev, PAGE_SIZE,
+					&data->dma_desc_addr, GFP_KERNEL);
+	if (!data->dma_desc)
+		return -EINVAL;
+
+	/*
+	 * Request the DMA channel
+	 */
+	data->dma_channel = pxa_request_dma(DRV_NAME, DMA_PRIO_LOW,
+						pxa_ata_dma_irq, ap);
+	if (data->dma_channel < 0)
+		return -EBUSY;
+
+	/*
+	 * Stop and clear the DMA channel
+	 */
+	DCSR(data->dma_channel) = 0;
+
+	/*
+	 * Activate the ATA host
+	 */
+	ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
+				pdata->irq_flags, &pxa_ata_sht);
+	if (ret)
+		pxa_free_dma(data->dma_channel);
+
+	return ret;
+}
+
+static int __devexit pxa_ata_remove(struct platform_device *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct pata_pxa_data *data = host->ports[0]->private_data;
+
+	pxa_free_dma(data->dma_channel);
+
+	ata_host_detach(host);
+
+	return 0;
+}
+
+static struct platform_driver pxa_ata_driver = {
+	.probe		= pxa_ata_probe,
+	.remove		= __devexit_p(pxa_ata_remove),
+	.driver		= {
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init pxa_ata_init(void)
+{
+	return platform_driver_register(&pxa_ata_driver);
+}
+
+static void __exit pxa_ata_exit(void)
+{
+	platform_driver_unregister(&pxa_ata_driver);
+}
+
+module_init(pxa_ata_init);
+module_exit(pxa_ata_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
-- 
cgit v1.2.3


From 8a2b6beffc88b83089845d72eed2ed74eb5c9b1e Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Tue, 8 Jun 2010 06:25:17 +0000
Subject: net/irda/sh_irda: Modify clk_get lookups

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/net/irda/sh_irda.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/irda/sh_irda.c b/drivers/net/irda/sh_irda.c
index 9a828b06a57e..9db7084bc001 100644
--- a/drivers/net/irda/sh_irda.c
+++ b/drivers/net/irda/sh_irda.c
@@ -748,7 +748,6 @@ static int __devinit sh_irda_probe(struct platform_device *pdev)
 	struct net_device *ndev;
 	struct sh_irda_self *self;
 	struct resource *res;
-	char clk_name[8];
 	unsigned int irq;
 	int err = -ENOMEM;
 
@@ -775,10 +774,9 @@ static int __devinit sh_irda_probe(struct platform_device *pdev)
 	if (err)
 		goto err_mem_2;
 
-	snprintf(clk_name, sizeof(clk_name), "irda%d", pdev->id);
-	self->clk = clk_get(&pdev->dev, clk_name);
+	self->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(self->clk)) {
-		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+		dev_err(&pdev->dev, "cannot get irda clock\n");
 		goto err_mem_3;
 	}
 
-- 
cgit v1.2.3


From dba6f385b83d7f19eb1d4df12f422bab945c7f10 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 30 Jun 2010 09:26:35 +0000
Subject: fbdev: sh-mobile-lcdc: fix potential Oops in SH-Mobile LCDC
 framebuffer driver

sh_mobile_lcdc_setup_clocks() can perform IO, therefore it has to be called
after ioremap(). Also check return code of ioremap() and use resource_size()
instead of open-coding it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sh_mobile_lcdcfb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 12c451a711e9..0c97509d0237 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -1020,14 +1020,16 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
+	priv->base = ioremap_nocache(res->start, resource_size(res));
+	if (!priv->base)
+		goto err1;
+
 	error = sh_mobile_lcdc_setup_clocks(pdev, pdata->clock_source, priv);
 	if (error) {
 		dev_err(&pdev->dev, "unable to setup clocks\n");
 		goto err1;
 	}
 
-	priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1);
-
 	for (i = 0; i < j; i++) {
 		cfg = &priv->ch[i].cfg;
 
-- 
cgit v1.2.3


From b3dd51a8a6ce2e618e8a1be8fa0e7d3d4733c300 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 21 Jul 2010 10:13:10 +0000
Subject: sh: add a reparent function to DIV6 clocks

Add support for reparenting of div6 clocks on SuperH and SH-Mobile SoCs.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/clk-cpg.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 56 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/sh/clk-cpg.c b/drivers/sh/clk-cpg.c
index f5c80ba9ab1c..8c024b984ed8 100644
--- a/drivers/sh/clk-cpg.c
+++ b/drivers/sh/clk-cpg.c
@@ -68,6 +68,39 @@ static unsigned long sh_clk_div6_recalc(struct clk *clk)
 	return clk->freq_table[idx].frequency;
 }
 
+static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent)
+{
+	struct clk_div_mult_table *table = &sh_clk_div6_table;
+	u32 value;
+	int ret, i;
+
+	if (!clk->parent_table || !clk->parent_num)
+		return -EINVAL;
+
+	/* Search the parent */
+	for (i = 0; i < clk->parent_num; i++)
+		if (clk->parent_table[i] == parent)
+			break;
+
+	if (i == clk->parent_num)
+		return -ENODEV;
+
+	ret = clk_reparent(clk, parent);
+	if (ret < 0)
+		return ret;
+
+	value = __raw_readl(clk->enable_reg) &
+		~(((1 << clk->src_width) - 1) << clk->src_shift);
+
+	__raw_writel(value | (i << clk->src_shift), clk->enable_reg);
+
+	/* Rebuild the frequency table */
+	clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
+			     table, &clk->arch_flags);
+
+	return 0;
+}
+
 static int sh_clk_div6_set_rate(struct clk *clk,
 				unsigned long rate, int algo_id)
 {
@@ -117,7 +150,17 @@ static struct clk_ops sh_clk_div6_clk_ops = {
 	.disable	= sh_clk_div6_disable,
 };
 
-int __init sh_clk_div6_register(struct clk *clks, int nr)
+static struct clk_ops sh_clk_div6_reparent_clk_ops = {
+	.recalc		= sh_clk_div6_recalc,
+	.round_rate	= sh_clk_div_round_rate,
+	.set_rate	= sh_clk_div6_set_rate,
+	.enable		= sh_clk_div6_enable,
+	.disable	= sh_clk_div6_disable,
+	.set_parent	= sh_clk_div6_set_parent,
+};
+
+static int __init sh_clk_div6_register_ops(struct clk *clks, int nr,
+					   struct clk_ops *ops)
 {
 	struct clk *clkp;
 	void *freq_table;
@@ -136,7 +179,7 @@ int __init sh_clk_div6_register(struct clk *clks, int nr)
 	for (k = 0; !ret && (k < nr); k++) {
 		clkp = clks + k;
 
-		clkp->ops = &sh_clk_div6_clk_ops;
+		clkp->ops = ops;
 		clkp->id = -1;
 		clkp->freq_table = freq_table + (k * freq_table_size);
 		clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
@@ -147,6 +190,17 @@ int __init sh_clk_div6_register(struct clk *clks, int nr)
 	return ret;
 }
 
+int __init sh_clk_div6_register(struct clk *clks, int nr)
+{
+	return sh_clk_div6_register_ops(clks, nr, &sh_clk_div6_clk_ops);
+}
+
+int __init sh_clk_div6_reparent_register(struct clk *clks, int nr)
+{
+	return sh_clk_div6_register_ops(clks, nr,
+					&sh_clk_div6_reparent_clk_ops);
+}
+
 static unsigned long sh_clk_div4_recalc(struct clk *clk)
 {
 	struct clk_div4_table *d4t = clk->priv;
-- 
cgit v1.2.3


From c2439398170be9d7af28eb3ab59593369cb303f3 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 21 Jul 2010 10:13:17 +0000
Subject: sh: add a parameter to LCDC driver's .display_on() callback

HDMI support for the sh_mobile_lcdc framebuffer driver will require a 'struct
fb_info *' pointer for its .display_on() callback. While at it fix kfr2r09
framebuffer modular build.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sh_mipi_dsi.c      | 2 +-
 drivers/video/sh_mobile_lcdcfb.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index 017ae9f47d36..5699ce0c1780 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -100,7 +100,7 @@ static void sh_mipi_shutdown(struct platform_device *pdev)
 	sh_mipi_dsi_enable(mipi, false);
 }
 
-static void mipi_display_on(void *arg)
+static void mipi_display_on(void *arg, struct fb_info *info)
 {
 	struct sh_mipi *mipi = arg;
 
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 0c97509d0237..b9e6f93642d2 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -577,7 +577,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 
 		board_cfg = &ch->cfg.board_cfg;
 		if (board_cfg->display_on)
-			board_cfg->display_on(board_cfg->board_data);
+			board_cfg->display_on(board_cfg->board_data, ch->info);
 	}
 
 	return 0;
-- 
cgit v1.2.3


From 6011bdeaa6089d49c02de69f05980da7bad314ab Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 21 Jul 2010 10:13:21 +0000
Subject: fbdev: sh-mobile: HDMI support for SH-Mobile SoCs

Some SH-Mobile SoCs have an HDMI controller and a PHY, attached to one of their
LCDC interfaces. This patch adds a preliminary static support for such
controllers, this means, that only the 720p mode is handled ATM. Support for
more modes and a dynamic switching between them will be added by a follow up
patch.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/Kconfig            |    7 +
 drivers/video/Makefile           |    1 +
 drivers/video/sh_mobile_hdmi.c   | 1028 ++++++++++++++++++++++++++++++++++++++
 drivers/video/sh_mobile_lcdcfb.c |  188 +++++--
 4 files changed, 1175 insertions(+), 49 deletions(-)
 create mode 100644 drivers/video/sh_mobile_hdmi.c

(limited to 'drivers')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a9f9e5eaa040..830449c382e8 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1914,6 +1914,13 @@ config FB_SH_MOBILE_LCDC
 	---help---
 	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
 
+config FB_SH_MOBILE_HDMI
+	tristate "SuperH Mobile HDMI controller support"
+	depends on FB_SH_MOBILE_LCDC
+	select FB_MODE_HELPERS
+	---help---
+	  Driver for the on-chip SH-Mobile HDMI controller.
+
 config FB_TMIO
 	tristate "Toshiba Mobile IO FrameBuffer support"
 	depends on FB && MFD_CORE
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 3c3bf867ef18..e5258279ccb0 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -124,6 +124,7 @@ obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
+obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-y                             += omap2/
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
new file mode 100644
index 000000000000..2fde08cc66bf
--- /dev/null
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -0,0 +1,1028 @@
+/*
+ * SH-Mobile High-Definition Multimedia Interface (HDMI) driver
+ * for SLISHDMI13T and SLIPHDMIT IP cores
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <video/sh_mobile_hdmi.h>
+#include <video/sh_mobile_lcdc.h>
+
+#define HDMI_SYSTEM_CTRL			0x00 /* System control */
+#define HDMI_L_R_DATA_SWAP_CTRL_RPKT		0x01 /* L/R data swap control,
+							bits 19..16 of 20-bit N for Audio Clock Regeneration packet */
+#define HDMI_20_BIT_N_FOR_AUDIO_RPKT_15_8	0x02 /* bits 15..8 of 20-bit N for Audio Clock Regeneration packet */
+#define HDMI_20_BIT_N_FOR_AUDIO_RPKT_7_0	0x03 /* bits 7..0 of 20-bit N for Audio Clock Regeneration packet */
+#define HDMI_SPDIF_AUDIO_SAMP_FREQ_CTS		0x04 /* SPDIF audio sampling frequency,
+							bits 19..16 of Internal CTS */
+#define HDMI_INTERNAL_CTS_15_8			0x05 /* bits 15..8 of Internal CTS */
+#define HDMI_INTERNAL_CTS_7_0			0x06 /* bits 7..0 of Internal CTS */
+#define HDMI_EXTERNAL_CTS_19_16			0x07 /* External CTS */
+#define HDMI_EXTERNAL_CTS_15_8			0x08 /* External CTS */
+#define HDMI_EXTERNAL_CTS_7_0			0x09 /* External CTS */
+#define HDMI_AUDIO_SETTING_1			0x0A /* Audio setting.1 */
+#define HDMI_AUDIO_SETTING_2			0x0B /* Audio setting.2 */
+#define HDMI_I2S_AUDIO_SET			0x0C /* I2S audio setting */
+#define HDMI_DSD_AUDIO_SET			0x0D /* DSD audio setting */
+#define HDMI_DEBUG_MONITOR_1			0x0E /* Debug monitor.1 */
+#define HDMI_DEBUG_MONITOR_2			0x0F /* Debug monitor.2 */
+#define HDMI_I2S_INPUT_PIN_SWAP			0x10 /* I2S input pin swap */
+#define HDMI_AUDIO_STATUS_BITS_SETTING_1	0x11 /* Audio status bits setting.1 */
+#define HDMI_AUDIO_STATUS_BITS_SETTING_2	0x12 /* Audio status bits setting.2 */
+#define HDMI_CATEGORY_CODE			0x13 /* Category code */
+#define HDMI_SOURCE_NUM_AUDIO_WORD_LEN		0x14 /* Source number/Audio word length */
+#define HDMI_AUDIO_VIDEO_SETTING_1		0x15 /* Audio/Video setting.1 */
+#define HDMI_VIDEO_SETTING_1			0x16 /* Video setting.1 */
+#define HDMI_DEEP_COLOR_MODES			0x17 /* Deep Color Modes */
+
+/* 12 16- and 10-bit Color space conversion parameters: 0x18..0x2f */
+#define HDMI_COLOR_SPACE_CONVERSION_PARAMETERS	0x18
+
+#define HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS	0x30 /* External video parameter settings */
+#define HDMI_EXTERNAL_H_TOTAL_7_0		0x31 /* External horizontal total (LSB) */
+#define HDMI_EXTERNAL_H_TOTAL_11_8		0x32 /* External horizontal total (MSB) */
+#define HDMI_EXTERNAL_H_BLANK_7_0		0x33 /* External horizontal blank (LSB) */
+#define HDMI_EXTERNAL_H_BLANK_9_8		0x34 /* External horizontal blank (MSB) */
+#define HDMI_EXTERNAL_H_DELAY_7_0		0x35 /* External horizontal delay (LSB) */
+#define HDMI_EXTERNAL_H_DELAY_9_8		0x36 /* External horizontal delay (MSB) */
+#define HDMI_EXTERNAL_H_DURATION_7_0		0x37 /* External horizontal duration (LSB) */
+#define HDMI_EXTERNAL_H_DURATION_9_8		0x38 /* External horizontal duration (MSB) */
+#define HDMI_EXTERNAL_V_TOTAL_7_0		0x39 /* External vertical total (LSB) */
+#define HDMI_EXTERNAL_V_TOTAL_9_8		0x3A /* External vertical total (MSB) */
+#define HDMI_AUDIO_VIDEO_SETTING_2		0x3B /* Audio/Video setting.2 */
+#define HDMI_EXTERNAL_V_BLANK			0x3D /* External vertical blank */
+#define HDMI_EXTERNAL_V_DELAY			0x3E /* External vertical delay */
+#define HDMI_EXTERNAL_V_DURATION		0x3F /* External vertical duration */
+#define HDMI_CTRL_PKT_MANUAL_SEND_CONTROL	0x40 /* Control packet manual send control */
+#define HDMI_CTRL_PKT_AUTO_SEND			0x41 /* Control packet auto send with VSYNC control */
+#define HDMI_AUTO_CHECKSUM_OPTION		0x42 /* Auto checksum option */
+#define HDMI_VIDEO_SETTING_2			0x45 /* Video setting.2 */
+#define HDMI_OUTPUT_OPTION			0x46 /* Output option */
+#define HDMI_SLIPHDMIT_PARAM_OPTION		0x51 /* SLIPHDMIT parameter option */
+#define HDMI_HSYNC_PMENT_AT_EMB_7_0		0x52 /* HSYNC placement at embedded sync (LSB) */
+#define HDMI_HSYNC_PMENT_AT_EMB_15_8		0x53 /* HSYNC placement at embedded sync (MSB) */
+#define HDMI_VSYNC_PMENT_AT_EMB_7_0		0x54 /* VSYNC placement at embedded sync (LSB) */
+#define HDMI_VSYNC_PMENT_AT_EMB_14_8		0x55 /* VSYNC placement at embedded sync (MSB) */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_1		0x56 /* SLIPHDMIT parameter settings.1 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_2		0x57 /* SLIPHDMIT parameter settings.2 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_3		0x58 /* SLIPHDMIT parameter settings.3 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_5		0x59 /* SLIPHDMIT parameter settings.5 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_6		0x5A /* SLIPHDMIT parameter settings.6 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_7		0x5B /* SLIPHDMIT parameter settings.7 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_8		0x5C /* SLIPHDMIT parameter settings.8 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_9		0x5D /* SLIPHDMIT parameter settings.9 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_10	0x5E /* SLIPHDMIT parameter settings.10 */
+#define HDMI_CTRL_PKT_BUF_INDEX			0x5F /* Control packet buffer index */
+#define HDMI_CTRL_PKT_BUF_ACCESS_HB0		0x60 /* Control packet data buffer access window - HB0 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_HB1		0x61 /* Control packet data buffer access window - HB1 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_HB2		0x62 /* Control packet data buffer access window - HB2 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB0		0x63 /* Control packet data buffer access window - PB0 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB1		0x64 /* Control packet data buffer access window - PB1 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB2		0x65 /* Control packet data buffer access window - PB2 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB3		0x66 /* Control packet data buffer access window - PB3 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB4		0x67 /* Control packet data buffer access window - PB4 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB5		0x68 /* Control packet data buffer access window - PB5 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB6		0x69 /* Control packet data buffer access window - PB6 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB7		0x6A /* Control packet data buffer access window - PB7 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB8		0x6B /* Control packet data buffer access window - PB8 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB9		0x6C /* Control packet data buffer access window - PB9 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB10		0x6D /* Control packet data buffer access window - PB10 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB11		0x6E /* Control packet data buffer access window - PB11 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB12		0x6F /* Control packet data buffer access window - PB12 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB13		0x70 /* Control packet data buffer access window - PB13 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB14		0x71 /* Control packet data buffer access window - PB14 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB15		0x72 /* Control packet data buffer access window - PB15 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB16		0x73 /* Control packet data buffer access window - PB16 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB17		0x74 /* Control packet data buffer access window - PB17 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB18		0x75 /* Control packet data buffer access window - PB18 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB19		0x76 /* Control packet data buffer access window - PB19 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB20		0x77 /* Control packet data buffer access window - PB20 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB21		0x78 /* Control packet data buffer access window - PB21 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB22		0x79 /* Control packet data buffer access window - PB22 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB23		0x7A /* Control packet data buffer access window - PB23 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB24		0x7B /* Control packet data buffer access window - PB24 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB25		0x7C /* Control packet data buffer access window - PB25 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB26		0x7D /* Control packet data buffer access window - PB26 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB27		0x7E /* Control packet data buffer access window - PB27 */
+#define HDMI_EDID_KSV_FIFO_ACCESS_WINDOW	0x80 /* EDID/KSV FIFO access window */
+#define HDMI_DDC_BUS_ACCESS_FREQ_CTRL_7_0	0x81 /* DDC bus access frequency control (LSB) */
+#define HDMI_DDC_BUS_ACCESS_FREQ_CTRL_15_8	0x82 /* DDC bus access frequency control (MSB) */
+#define HDMI_INTERRUPT_MASK_1			0x92 /* Interrupt mask.1 */
+#define HDMI_INTERRUPT_MASK_2			0x93 /* Interrupt mask.2 */
+#define HDMI_INTERRUPT_STATUS_1			0x94 /* Interrupt status.1 */
+#define HDMI_INTERRUPT_STATUS_2			0x95 /* Interrupt status.2 */
+#define HDMI_INTERRUPT_MASK_3			0x96 /* Interrupt mask.3 */
+#define HDMI_INTERRUPT_MASK_4			0x97 /* Interrupt mask.4 */
+#define HDMI_INTERRUPT_STATUS_3			0x98 /* Interrupt status.3 */
+#define HDMI_INTERRUPT_STATUS_4			0x99 /* Interrupt status.4 */
+#define HDMI_SOFTWARE_HDCP_CONTROL_1		0x9A /* Software HDCP control.1 */
+#define HDMI_FRAME_COUNTER			0x9C /* Frame counter */
+#define HDMI_FRAME_COUNTER_FOR_RI_CHECK		0x9D /* Frame counter for Ri check */
+#define HDMI_HDCP_CONTROL			0xAF /* HDCP control */
+#define HDMI_RI_FRAME_COUNT_REGISTER		0xB2 /* Ri frame count register */
+#define HDMI_DDC_BUS_CONTROL			0xB7 /* DDC bus control */
+#define HDMI_HDCP_STATUS			0xB8 /* HDCP status */
+#define HDMI_SHA0				0xB9 /* sha0 */
+#define HDMI_SHA1				0xBA /* sha1 */
+#define HDMI_SHA2				0xBB /* sha2 */
+#define HDMI_SHA3				0xBC /* sha3 */
+#define HDMI_SHA4				0xBD /* sha4 */
+#define HDMI_BCAPS_READ				0xBE /* BCAPS read / debug */
+#define HDMI_AKSV_BKSV_7_0_MONITOR		0xBF /* AKSV/BKSV[7:0] monitor */
+#define HDMI_AKSV_BKSV_15_8_MONITOR		0xC0 /* AKSV/BKSV[15:8] monitor */
+#define HDMI_AKSV_BKSV_23_16_MONITOR		0xC1 /* AKSV/BKSV[23:16] monitor */
+#define HDMI_AKSV_BKSV_31_24_MONITOR		0xC2 /* AKSV/BKSV[31:24] monitor */
+#define HDMI_AKSV_BKSV_39_32_MONITOR		0xC3 /* AKSV/BKSV[39:32] monitor */
+#define HDMI_EDID_SEGMENT_POINTER		0xC4 /* EDID segment pointer */
+#define HDMI_EDID_WORD_ADDRESS			0xC5 /* EDID word address */
+#define HDMI_EDID_DATA_FIFO_ADDRESS		0xC6 /* EDID data FIFO address */
+#define HDMI_NUM_OF_HDMI_DEVICES		0xC7 /* Number of HDMI devices */
+#define HDMI_HDCP_ERROR_CODE			0xC8 /* HDCP error code */
+#define HDMI_100MS_TIMER_SET			0xC9 /* 100ms timer setting */
+#define HDMI_5SEC_TIMER_SET			0xCA /* 5sec timer setting */
+#define HDMI_RI_READ_COUNT			0xCB /* Ri read count */
+#define HDMI_AN_SEED				0xCC /* An seed */
+#define HDMI_MAX_NUM_OF_RCIVRS_ALLOWED		0xCD /* Maximum number of receivers allowed */
+#define HDMI_HDCP_MEMORY_ACCESS_CONTROL_1	0xCE /* HDCP memory access control.1 */
+#define HDMI_HDCP_MEMORY_ACCESS_CONTROL_2	0xCF /* HDCP memory access control.2 */
+#define HDMI_HDCP_CONTROL_2			0xD0 /* HDCP Control 2 */
+#define HDMI_HDCP_KEY_MEMORY_CONTROL		0xD2 /* HDCP Key Memory Control */
+#define HDMI_COLOR_SPACE_CONV_CONFIG_1		0xD3 /* Color space conversion configuration.1 */
+#define HDMI_VIDEO_SETTING_3			0xD4 /* Video setting.3 */
+#define HDMI_RI_7_0				0xD5 /* Ri[7:0] */
+#define HDMI_RI_15_8				0xD6 /* Ri[15:8] */
+#define HDMI_PJ					0xD7 /* Pj */
+#define HDMI_SHA_RD				0xD8 /* sha_rd */
+#define HDMI_RI_7_0_SAVED			0xD9 /* Ri[7:0] saved */
+#define HDMI_RI_15_8_SAVED			0xDA /* Ri[15:8] saved */
+#define HDMI_PJ_SAVED				0xDB /* Pj saved */
+#define HDMI_NUM_OF_DEVICES			0xDC /* Number of devices */
+#define HDMI_HOT_PLUG_MSENS_STATUS		0xDF /* Hot plug/MSENS status */
+#define HDMI_BCAPS_WRITE			0xE0 /* bcaps */
+#define HDMI_BSTAT_7_0				0xE1 /* bstat[7:0] */
+#define HDMI_BSTAT_15_8				0xE2 /* bstat[15:8] */
+#define HDMI_BKSV_7_0				0xE3 /* bksv[7:0] */
+#define HDMI_BKSV_15_8				0xE4 /* bksv[15:8] */
+#define HDMI_BKSV_23_16				0xE5 /* bksv[23:16] */
+#define HDMI_BKSV_31_24				0xE6 /* bksv[31:24] */
+#define HDMI_BKSV_39_32				0xE7 /* bksv[39:32] */
+#define HDMI_AN_7_0				0xE8 /* An[7:0] */
+#define HDMI_AN_15_8				0xE9 /* An [15:8] */
+#define HDMI_AN_23_16				0xEA /* An [23:16] */
+#define HDMI_AN_31_24				0xEB /* An [31:24] */
+#define HDMI_AN_39_32				0xEC /* An [39:32] */
+#define HDMI_AN_47_40				0xED /* An [47:40] */
+#define HDMI_AN_55_48				0xEE /* An [55:48] */
+#define HDMI_AN_63_56				0xEF /* An [63:56] */
+#define HDMI_PRODUCT_ID				0xF0 /* Product ID */
+#define HDMI_REVISION_ID			0xF1 /* Revision ID */
+#define HDMI_TEST_MODE				0xFE /* Test mode */
+
+enum hotplug_state {
+	HDMI_HOTPLUG_DISCONNECTED,
+	HDMI_HOTPLUG_CONNECTED,
+	HDMI_HOTPLUG_EDID_DONE,
+};
+
+struct sh_hdmi {
+	void __iomem *base;
+	enum hotplug_state hp_state;
+	struct clk *hdmi_clk;
+	struct device *dev;
+	struct fb_info *info;
+	struct delayed_work edid_work;
+	struct fb_var_screeninfo var;
+};
+
+static void hdmi_write(struct sh_hdmi *hdmi, u8 data, u8 reg)
+{
+	iowrite8(data, hdmi->base + reg);
+}
+
+static u8 hdmi_read(struct sh_hdmi *hdmi, u8 reg)
+{
+	return ioread8(hdmi->base + reg);
+}
+
+/* External video parameter settings */
+static void hdmi_external_video_param(struct sh_hdmi *hdmi)
+{
+	struct fb_var_screeninfo *var = &hdmi->var;
+	u16 htotal, hblank, hdelay, vtotal, vblank, vdelay, voffset;
+	u8 sync = 0;
+
+	htotal = var->xres + var->right_margin + var->left_margin + var->hsync_len;
+
+	hdelay = var->hsync_len + var->left_margin;
+	hblank = var->right_margin + hdelay;
+
+	/*
+	 * Vertical timing looks a bit different in Figure 18,
+	 * but let's try the same first by setting offset = 0
+	 */
+	vtotal = var->yres + var->upper_margin + var->lower_margin + var->vsync_len;
+
+	vdelay = var->vsync_len + var->upper_margin;
+	vblank = var->lower_margin + vdelay;
+	voffset = min(var->upper_margin / 2, 6U);
+
+	/*
+	 * [3]: VSYNC polarity: Positive
+	 * [2]: HSYNC polarity: Positive
+	 * [1]: Interlace/Progressive: Progressive
+	 * [0]: External video settings enable: used.
+	 */
+	if (var->sync & FB_SYNC_HOR_HIGH_ACT)
+		sync |= 4;
+	if (var->sync & FB_SYNC_VERT_HIGH_ACT)
+		sync |= 8;
+
+	pr_debug("H: %u, %u, %u, %u; V: %u, %u, %u, %u; sync 0x%x\n",
+		 htotal, hblank, hdelay, var->hsync_len,
+		 vtotal, vblank, vdelay, var->vsync_len, sync);
+
+	hdmi_write(hdmi, sync | (voffset << 4), HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS);
+
+	hdmi_write(hdmi, htotal, HDMI_EXTERNAL_H_TOTAL_7_0);
+	hdmi_write(hdmi, htotal >> 8, HDMI_EXTERNAL_H_TOTAL_11_8);
+
+	hdmi_write(hdmi, hblank, HDMI_EXTERNAL_H_BLANK_7_0);
+	hdmi_write(hdmi, hblank >> 8, HDMI_EXTERNAL_H_BLANK_9_8);
+
+	hdmi_write(hdmi, hdelay, HDMI_EXTERNAL_H_DELAY_7_0);
+	hdmi_write(hdmi, hdelay >> 8, HDMI_EXTERNAL_H_DELAY_9_8);
+
+	hdmi_write(hdmi, var->hsync_len, HDMI_EXTERNAL_H_DURATION_7_0);
+	hdmi_write(hdmi, var->hsync_len >> 8, HDMI_EXTERNAL_H_DURATION_9_8);
+
+	hdmi_write(hdmi, vtotal, HDMI_EXTERNAL_V_TOTAL_7_0);
+	hdmi_write(hdmi, vtotal >> 8, HDMI_EXTERNAL_V_TOTAL_9_8);
+
+	hdmi_write(hdmi, vblank, HDMI_EXTERNAL_V_BLANK);
+
+	hdmi_write(hdmi, vdelay, HDMI_EXTERNAL_V_DELAY);
+
+	hdmi_write(hdmi, var->vsync_len, HDMI_EXTERNAL_V_DURATION);
+
+	/* Set bit 0 of HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS here for manual mode */
+}
+
+/**
+ * sh_hdmi_video_config()
+ */
+static void sh_hdmi_video_config(struct sh_hdmi *hdmi)
+{
+	/*
+	 * [7:4]: Audio sampling frequency: 48kHz
+	 * [3:1]: Input video format: RGB and YCbCr 4:4:4 (Y on Green)
+	 * [0]: Internal/External DE select: internal
+	 */
+	hdmi_write(hdmi, 0x20, HDMI_AUDIO_VIDEO_SETTING_1);
+
+	/*
+	 * [7:6]: Video output format: RGB 4:4:4
+	 * [5:4]: Input video data width: 8 bit
+	 * [3:1]: EAV/SAV location: channel 1
+	 * [0]: Video input color space: RGB
+	 */
+	hdmi_write(hdmi, 0x34, HDMI_VIDEO_SETTING_1);
+
+	/*
+	 * [7:6]: Together with bit [6] of HDMI_AUDIO_VIDEO_SETTING_2, which is
+	 * left at 0 by default, this configures 24bpp and sets the Color Depth
+	 * (CD) field in the General Control Packet
+	 */
+	hdmi_write(hdmi, 0x20, HDMI_DEEP_COLOR_MODES);
+}
+
+/**
+ * sh_hdmi_audio_config()
+ */
+static void sh_hdmi_audio_config(struct sh_hdmi *hdmi)
+{
+	/*
+	 * [7:4] L/R data swap control
+	 * [3:0] appropriate N[19:16]
+	 */
+	hdmi_write(hdmi, 0x00, HDMI_L_R_DATA_SWAP_CTRL_RPKT);
+	/* appropriate N[15:8] */
+	hdmi_write(hdmi, 0x18, HDMI_20_BIT_N_FOR_AUDIO_RPKT_15_8);
+	/* appropriate N[7:0] */
+	hdmi_write(hdmi, 0x00, HDMI_20_BIT_N_FOR_AUDIO_RPKT_7_0);
+
+	/* [7:4] 48 kHz	SPDIF not used */
+	hdmi_write(hdmi, 0x20, HDMI_SPDIF_AUDIO_SAMP_FREQ_CTS);
+
+	/*
+	 * [6:5] set required down sampling rate if required
+	 * [4:3] set required audio source
+	 */
+	hdmi_write(hdmi, 0x00, HDMI_AUDIO_SETTING_1);
+
+	/* [3:0] set sending channel number for channel status */
+	hdmi_write(hdmi, 0x40, HDMI_AUDIO_SETTING_2);
+
+	/*
+	 * [5:2] set valid I2S source input pin
+	 * [1:0] set input I2S source mode
+	 */
+	hdmi_write(hdmi, 0x04, HDMI_I2S_AUDIO_SET);
+
+	/* [7:4] set valid DSD source input pin */
+	hdmi_write(hdmi, 0x00, HDMI_DSD_AUDIO_SET);
+
+	/* [7:0] set appropriate I2S input pin swap settings if required */
+	hdmi_write(hdmi, 0x00, HDMI_I2S_INPUT_PIN_SWAP);
+
+	/*
+	 * [7] set validity bit for channel status
+	 * [3:0] set original sample frequency for channel status
+	 */
+	hdmi_write(hdmi, 0x00, HDMI_AUDIO_STATUS_BITS_SETTING_1);
+
+	/*
+	 * [7] set value for channel status
+	 * [6] set value for channel status
+	 * [5] set copyright bit for channel status
+	 * [4:2] set additional information for channel status
+	 * [1:0] set clock accuracy for channel status
+	 */
+	hdmi_write(hdmi, 0x00, HDMI_AUDIO_STATUS_BITS_SETTING_2);
+
+	/* [7:0] set category code for channel status */
+	hdmi_write(hdmi, 0x00, HDMI_CATEGORY_CODE);
+
+	/*
+	 * [7:4] set source number for channel status
+	 * [3:0] set word length for channel status
+	 */
+	hdmi_write(hdmi, 0x00, HDMI_SOURCE_NUM_AUDIO_WORD_LEN);
+
+	/* [7:4] set sample frequency for channel status */
+	hdmi_write(hdmi, 0x20, HDMI_AUDIO_VIDEO_SETTING_1);
+}
+
+/**
+ * sh_hdmi_phy_config()
+ */
+static void sh_hdmi_phy_config(struct sh_hdmi *hdmi)
+{
+	/* 720p, 8bit, 74.25MHz. Might need to be adjusted for other formats */
+	hdmi_write(hdmi, 0x19, HDMI_SLIPHDMIT_PARAM_SETTINGS_1);
+	hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2);
+	hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3);
+	/* PLLA_CONFIG[7:0]: VCO gain, VCO offset, LPF resistance[0] */
+	hdmi_write(hdmi, 0x44, HDMI_SLIPHDMIT_PARAM_SETTINGS_5);
+	hdmi_write(hdmi, 0x32, HDMI_SLIPHDMIT_PARAM_SETTINGS_6);
+	hdmi_write(hdmi, 0x4A, HDMI_SLIPHDMIT_PARAM_SETTINGS_7);
+	hdmi_write(hdmi, 0x0E, HDMI_SLIPHDMIT_PARAM_SETTINGS_8);
+	hdmi_write(hdmi, 0x25, HDMI_SLIPHDMIT_PARAM_SETTINGS_9);
+	hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10);
+}
+
+/**
+ * sh_hdmi_avi_infoframe_setup() - Auxiliary Video Information InfoFrame CONTROL PACKET
+ */
+static void sh_hdmi_avi_infoframe_setup(struct sh_hdmi *hdmi)
+{
+	/* AVI InfoFrame */
+	hdmi_write(hdmi, 0x06, HDMI_CTRL_PKT_BUF_INDEX);
+
+	/* Packet Type = 0x82 */
+	hdmi_write(hdmi, 0x82, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+
+	/* Version = 0x02 */
+	hdmi_write(hdmi, 0x02, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+
+	/* Length = 13 (0x0D) */
+	hdmi_write(hdmi, 0x0D, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+	/* N. A. Checksum */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0);
+
+	/*
+	 * Y = RGB
+	 * A0 = No Data
+	 * B = Bar Data not valid
+	 * S = No Data
+	 */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB1);
+
+	/*
+	 * C = No Data
+	 * M = 16:9 Picture Aspect Ratio
+	 * R = Same as picture aspect ratio
+	 */
+	hdmi_write(hdmi, 0x28, HDMI_CTRL_PKT_BUF_ACCESS_PB2);
+
+	/*
+	 * ITC = No Data
+	 * EC = xvYCC601
+	 * Q = Default (depends on video format)
+	 * SC = No Known non_uniform Scaling
+	 */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB3);
+
+	/*
+	 * VIC = 1280 x 720p: ignored if external config is used
+	 * Send 2 for 720 x 480p, 16 for 1080p
+	 */
+	hdmi_write(hdmi, 4, HDMI_CTRL_PKT_BUF_ACCESS_PB4);
+
+	/* PR = No Repetition */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB5);
+
+	/* Line Number of End of Top Bar (lower 8 bits) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB6);
+
+	/* Line Number of End of Top Bar (upper 8 bits) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB7);
+
+	/* Line Number of Start of Bottom Bar (lower 8 bits) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB8);
+
+	/* Line Number of Start of Bottom Bar (upper 8 bits) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB9);
+
+	/* Pixel Number of End of Left Bar (lower 8 bits) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB10);
+
+	/* Pixel Number of End of Left Bar (upper 8 bits) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB11);
+
+	/* Pixel Number of Start of Right Bar (lower 8 bits) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB12);
+
+	/* Pixel Number of Start of Right Bar (upper 8 bits) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB13);
+}
+
+/**
+ * sh_hdmi_audio_infoframe_setup() - Audio InfoFrame of CONTROL PACKET
+ */
+static void sh_hdmi_audio_infoframe_setup(struct sh_hdmi *hdmi)
+{
+	/* Audio InfoFrame */
+	hdmi_write(hdmi, 0x08, HDMI_CTRL_PKT_BUF_INDEX);
+
+	/* Packet Type = 0x84 */
+	hdmi_write(hdmi, 0x84, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+
+	/* Version Number = 0x01 */
+	hdmi_write(hdmi, 0x01, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+
+	/* 0 Length = 10 (0x0A) */
+	hdmi_write(hdmi, 0x0A, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+	/* n. a. Checksum */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0);
+
+	/* Audio Channel Count = Refer to Stream Header */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB1);
+
+	/* Refer to Stream Header */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB2);
+
+	/* Format depends on coding type (i.e. CT0...CT3) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB3);
+
+	/* Speaker Channel Allocation = Front Right + Front Left */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB4);
+
+	/* Level Shift Value = 0 dB, Down - mix is permitted or no information */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB5);
+
+	/* Reserved (0) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB6);
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB7);
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB8);
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB9);
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB10);
+}
+
+/**
+ * sh_hdmi_gamut_metadata_setup() - Gamut Metadata Packet of CONTROL PACKET
+ */
+static void sh_hdmi_gamut_metadata_setup(struct sh_hdmi *hdmi)
+{
+	int i;
+
+	/* Gamut Metadata Packet */
+	hdmi_write(hdmi, 0x04, HDMI_CTRL_PKT_BUF_INDEX);
+
+	/* Packet Type = 0x0A */
+	hdmi_write(hdmi, 0x0A, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+	/* Gamut Packet is not used, so default value */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+	/* Gamut Packet is not used, so default value */
+	hdmi_write(hdmi, 0x10, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+	/* GBD bytes 0 through 27 */
+	for (i = 0; i <= 27; i++)
+		/* HDMI_CTRL_PKT_BUF_ACCESS_PB0_63H - PB27_7EH */
+		hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_acp_setup() - Audio Content Protection Packet (ACP)
+ */
+static void sh_hdmi_acp_setup(struct sh_hdmi *hdmi)
+{
+	int i;
+
+	/* Audio Content Protection Packet (ACP) */
+	hdmi_write(hdmi, 0x01, HDMI_CTRL_PKT_BUF_INDEX);
+
+	/* Packet Type = 0x04 */
+	hdmi_write(hdmi, 0x04, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+	/* ACP_Type */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+	/* Reserved (0) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+	/* GBD bytes 0 through 27 */
+	for (i = 0; i <= 27; i++)
+		/* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
+		hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_isrc1_setup() - ISRC1 Packet
+ */
+static void sh_hdmi_isrc1_setup(struct sh_hdmi *hdmi)
+{
+	int i;
+
+	/* ISRC1 Packet */
+	hdmi_write(hdmi, 0x02, HDMI_CTRL_PKT_BUF_INDEX);
+
+	/* Packet Type = 0x05 */
+	hdmi_write(hdmi, 0x05, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+	/* ISRC_Cont, ISRC_Valid, Reserved (0), ISRC_Status */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+	/* Reserved (0) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+	/* PB0 UPC_EAN_ISRC_0-15 */
+	/* Bytes PB16-PB27 shall be set to a value of 0. */
+	for (i = 0; i <= 27; i++)
+		/* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
+		hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_isrc2_setup() - ISRC2 Packet
+ */
+static void sh_hdmi_isrc2_setup(struct sh_hdmi *hdmi)
+{
+	int i;
+
+	/* ISRC2 Packet */
+	hdmi_write(hdmi, 0x03, HDMI_CTRL_PKT_BUF_INDEX);
+
+	/* HB0 Packet Type = 0x06 */
+	hdmi_write(hdmi, 0x06, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+	/* Reserved (0) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+	/* Reserved (0) */
+	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+	/* PB0 UPC_EAN_ISRC_16-31 */
+	/* Bytes PB16-PB27 shall be set to a value of 0. */
+	for (i = 0; i <= 27; i++)
+		/* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
+		hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_configure() - Initialise HDMI for output
+ */
+static void sh_hdmi_configure(struct sh_hdmi *hdmi)
+{
+	/* Configure video format */
+	sh_hdmi_video_config(hdmi);
+
+	/* Configure audio format */
+	sh_hdmi_audio_config(hdmi);
+
+	/* Configure PHY */
+	sh_hdmi_phy_config(hdmi);
+
+	/* Auxiliary Video Information (AVI) InfoFrame */
+	sh_hdmi_avi_infoframe_setup(hdmi);
+
+	/* Audio InfoFrame */
+	sh_hdmi_audio_infoframe_setup(hdmi);
+
+	/* Gamut Metadata packet */
+	sh_hdmi_gamut_metadata_setup(hdmi);
+
+	/* Audio Content Protection (ACP) Packet */
+	sh_hdmi_acp_setup(hdmi);
+
+	/* ISRC1 Packet */
+	sh_hdmi_isrc1_setup(hdmi);
+
+	/* ISRC2 Packet */
+	sh_hdmi_isrc2_setup(hdmi);
+
+	/*
+	 * Control packet auto send with VSYNC control: auto send
+	 * General control, Gamut metadata, ISRC, and ACP packets
+	 */
+	hdmi_write(hdmi, 0x8E, HDMI_CTRL_PKT_AUTO_SEND);
+
+	/* FIXME */
+	msleep(10);
+
+	/* PS mode b->d, reset PLLA and PLLB */
+	hdmi_write(hdmi, 0x4C, HDMI_SYSTEM_CTRL);
+
+	udelay(10);
+
+	hdmi_write(hdmi, 0x40, HDMI_SYSTEM_CTRL);
+}
+
+static void sh_hdmi_read_edid(struct sh_hdmi *hdmi)
+{
+	struct fb_var_screeninfo *var = &hdmi->var;
+	struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+	struct fb_videomode *lcd_cfg = &pdata->lcd_chan->lcd_cfg;
+	unsigned long height = var->height, width = var->width;
+	int i;
+	u8 edid[128];
+
+	/* Read EDID */
+	pr_debug("Read back EDID code:");
+	for (i = 0; i < 128; i++) {
+		edid[i] = hdmi_read(hdmi, HDMI_EDID_KSV_FIFO_ACCESS_WINDOW);
+#ifdef DEBUG
+		if ((i % 16) == 0) {
+			printk(KERN_CONT "\n");
+			printk(KERN_DEBUG "%02X | %02X", i, edid[i]);
+		} else {
+			printk(KERN_CONT " %02X", edid[i]);
+		}
+#endif
+	}
+#ifdef DEBUG
+	printk(KERN_CONT "\n");
+#endif
+	fb_parse_edid(edid, var);
+	pr_debug("%u-%u-%u-%u x %u-%u-%u-%u @ %lu kHz monitor detected\n",
+		 var->left_margin, var->xres, var->right_margin, var->hsync_len,
+		 var->upper_margin, var->yres, var->lower_margin, var->vsync_len,
+		 PICOS2KHZ(var->pixclock));
+
+	/* FIXME: Use user-provided configuration instead of EDID */
+	var->width		= width;
+	var->xres		= lcd_cfg->xres;
+	var->xres_virtual	= lcd_cfg->xres;
+	var->left_margin	= lcd_cfg->left_margin;
+	var->right_margin	= lcd_cfg->right_margin;
+	var->hsync_len		= lcd_cfg->hsync_len;
+	var->height		= height;
+	var->yres		= lcd_cfg->yres;
+	var->yres_virtual	= lcd_cfg->yres * 2;
+	var->upper_margin	= lcd_cfg->upper_margin;
+	var->lower_margin	= lcd_cfg->lower_margin;
+	var->vsync_len		= lcd_cfg->vsync_len;
+	var->sync		= lcd_cfg->sync;
+	var->pixclock		= lcd_cfg->pixclock;
+
+	hdmi_external_video_param(hdmi);
+}
+
+static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
+{
+	struct sh_hdmi *hdmi = dev_id;
+	u8 status1, status2, mask1, mask2;
+
+	/* mode_b and PLLA and PLLB reset */
+	hdmi_write(hdmi, 0x2C, HDMI_SYSTEM_CTRL);
+
+	/* How long shall reset be held? */
+	udelay(10);
+
+	/* mode_b and PLLA and PLLB reset release */
+	hdmi_write(hdmi, 0x20, HDMI_SYSTEM_CTRL);
+
+	status1 = hdmi_read(hdmi, HDMI_INTERRUPT_STATUS_1);
+	status2 = hdmi_read(hdmi, HDMI_INTERRUPT_STATUS_2);
+
+	mask1 = hdmi_read(hdmi, HDMI_INTERRUPT_MASK_1);
+	mask2 = hdmi_read(hdmi, HDMI_INTERRUPT_MASK_2);
+
+	/* Correct would be to ack only set bits, but the datasheet requires 0xff */
+	hdmi_write(hdmi, 0xFF, HDMI_INTERRUPT_STATUS_1);
+	hdmi_write(hdmi, 0xFF, HDMI_INTERRUPT_STATUS_2);
+
+	if (printk_ratelimit())
+		pr_debug("IRQ #%d: Status #1: 0x%x & 0x%x, #2: 0x%x & 0x%x\n",
+			 irq, status1, mask1, status2, mask2);
+
+	if (!((status1 & mask1) | (status2 & mask2))) {
+		return IRQ_NONE;
+	} else if (status1 & 0xc0) {
+		u8 msens;
+
+		/* Datasheet specifies 10ms... */
+		udelay(500);
+
+		msens = hdmi_read(hdmi, HDMI_HOT_PLUG_MSENS_STATUS);
+		pr_debug("MSENS 0x%x\n", msens);
+		/* Check, if hot plug & MSENS pin status are both high */
+		if ((msens & 0xC0) == 0xC0) {
+			/* Display plug in */
+			hdmi->hp_state = HDMI_HOTPLUG_CONNECTED;
+
+			/* Set EDID word address  */
+			hdmi_write(hdmi, 0x00, HDMI_EDID_WORD_ADDRESS);
+			/* Set EDID segment pointer */
+			hdmi_write(hdmi, 0x00, HDMI_EDID_SEGMENT_POINTER);
+			/* Enable EDID interrupt */
+			hdmi_write(hdmi, 0xC6, HDMI_INTERRUPT_MASK_1);
+		} else if (!(status1 & 0x80)) {
+			/* Display unplug, beware multiple interrupts */
+			if (hdmi->hp_state != HDMI_HOTPLUG_DISCONNECTED)
+				schedule_delayed_work(&hdmi->edid_work, 0);
+
+			hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED;
+			/* display_off will switch back to mode_a */
+		}
+	} else if (status1 & 2) {
+		/* EDID error interrupt: retry */
+		/* Set EDID word address  */
+		hdmi_write(hdmi, 0x00, HDMI_EDID_WORD_ADDRESS);
+		/* Set EDID segment pointer */
+		hdmi_write(hdmi, 0x00, HDMI_EDID_SEGMENT_POINTER);
+	} else if (status1 & 4) {
+		/* Disable EDID interrupt */
+		hdmi_write(hdmi, 0xC0, HDMI_INTERRUPT_MASK_1);
+		hdmi->hp_state = HDMI_HOTPLUG_EDID_DONE;
+		schedule_delayed_work(&hdmi->edid_work, msecs_to_jiffies(10));
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void hdmi_display_on(void *arg, struct fb_info *info)
+{
+	struct sh_hdmi *hdmi = arg;
+	struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+
+	if (info->var.xres != 1280 || info->var.yres != 720) {
+		dev_warn(info->device, "Unsupported framebuffer geometry %ux%u\n",
+			 info->var.xres, info->var.yres);
+		return;
+	}
+
+	pr_debug("%s(%p): state %x\n", __func__, pdata->lcd_dev, info->state);
+	/*
+	 * FIXME: not a good place to store fb_info. And we cannot nullify it
+	 * even on monitor disconnect. What should the lifecycle be?
+	 */
+	hdmi->info = info;
+	switch (hdmi->hp_state) {
+	case HDMI_HOTPLUG_EDID_DONE:
+		/* PS mode d->e. All functions are active */
+		hdmi_write(hdmi, 0x80, HDMI_SYSTEM_CTRL);
+		pr_debug("HDMI running\n");
+		break;
+	case HDMI_HOTPLUG_DISCONNECTED:
+		info->state = FBINFO_STATE_SUSPENDED;
+	default:
+		hdmi->var = info->var;
+	}
+}
+
+static void hdmi_display_off(void *arg)
+{
+	struct sh_hdmi *hdmi = arg;
+	struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+
+	pr_debug("%s(%p)\n", __func__, pdata->lcd_dev);
+	/* PS mode e->a */
+	hdmi_write(hdmi, 0x10, HDMI_SYSTEM_CTRL);
+}
+
+/* Hotplug interrupt occurred, read EDID */
+static void edid_work_fn(struct work_struct *work)
+{
+	struct sh_hdmi *hdmi = container_of(work, struct sh_hdmi, edid_work.work);
+	struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+
+	pr_debug("%s(%p): begin, hotplug status %d\n", __func__,
+		 pdata->lcd_dev, hdmi->hp_state);
+
+	if (!pdata->lcd_dev)
+		return;
+
+	if (hdmi->hp_state == HDMI_HOTPLUG_EDID_DONE) {
+		pm_runtime_get_sync(hdmi->dev);
+		/* A device has been plugged in */
+		sh_hdmi_read_edid(hdmi);
+		msleep(10);
+		sh_hdmi_configure(hdmi);
+		/* Switched to another (d) power-save mode */
+		msleep(10);
+
+		if (!hdmi->info)
+			return;
+
+		acquire_console_sem();
+
+		/* HDMI plug in */
+		hdmi->info->var = hdmi->var;
+		if (hdmi->info->state != FBINFO_STATE_RUNNING)
+			fb_set_suspend(hdmi->info, 0);
+		else
+			hdmi_display_on(hdmi, hdmi->info);
+
+		release_console_sem();
+	} else {
+		if (!hdmi->info)
+			return;
+
+		acquire_console_sem();
+
+		/* HDMI disconnect */
+		fb_set_suspend(hdmi->info, 1);
+
+		release_console_sem();
+		pm_runtime_put(hdmi->dev);
+	}
+
+	pr_debug("%s(%p): end\n", __func__, pdata->lcd_dev);
+}
+
+static int __init sh_hdmi_probe(struct platform_device *pdev)
+{
+	struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int irq = platform_get_irq(pdev, 0), ret;
+	struct sh_hdmi *hdmi;
+	long rate;
+
+	if (!res || !pdata || irq < 0)
+		return -ENODEV;
+
+	hdmi = kzalloc(sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi) {
+		dev_err(&pdev->dev, "Cannot allocate device data\n");
+		return -ENOMEM;
+	}
+
+	hdmi->dev = &pdev->dev;
+
+	hdmi->hdmi_clk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(hdmi->hdmi_clk)) {
+		ret = PTR_ERR(hdmi->hdmi_clk);
+		dev_err(&pdev->dev, "Unable to get clock: %d\n", ret);
+		goto egetclk;
+	}
+
+	rate = PICOS2KHZ(pdata->lcd_chan->lcd_cfg.pixclock) * 1000;
+
+	rate = clk_round_rate(hdmi->hdmi_clk, rate);
+	if (rate < 0) {
+		ret = rate;
+		dev_err(&pdev->dev, "Cannot get suitable rate: %ld\n", rate);
+		goto erate;
+	}
+
+	ret = clk_set_rate(hdmi->hdmi_clk, rate);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Cannot set rate %ld: %d\n", rate, ret);
+		goto erate;
+	}
+
+	pr_debug("HDMI set frequency %lu\n", rate);
+
+	ret = clk_enable(hdmi->hdmi_clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Cannot enable clock: %d\n", ret);
+		goto eclkenable;
+	}
+
+	dev_info(&pdev->dev, "Enabled HDMI clock at %luHz\n", rate);
+
+	if (!request_mem_region(res->start, resource_size(res), dev_name(&pdev->dev))) {
+		dev_err(&pdev->dev, "HDMI register region already claimed\n");
+		ret = -EBUSY;
+		goto ereqreg;
+	}
+
+	hdmi->base = ioremap(res->start, resource_size(res));
+	if (!hdmi->base) {
+		dev_err(&pdev->dev, "HDMI register region already claimed\n");
+		ret = -ENOMEM;
+		goto emap;
+	}
+
+	platform_set_drvdata(pdev, hdmi);
+
+#if 1
+	/* Product and revision IDs are 0 in sh-mobile version */
+	dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
+		 hdmi_read(hdmi, HDMI_PRODUCT_ID), hdmi_read(hdmi, HDMI_REVISION_ID));
+#endif
+
+	/* Set up LCDC callbacks */
+	pdata->lcd_chan->board_cfg.board_data = hdmi;
+	pdata->lcd_chan->board_cfg.display_on = hdmi_display_on;
+	pdata->lcd_chan->board_cfg.display_off = hdmi_display_off;
+
+	INIT_DELAYED_WORK(&hdmi->edid_work, edid_work_fn);
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_resume(&pdev->dev);
+
+	ret = request_irq(irq, sh_hdmi_hotplug, 0,
+			  dev_name(&pdev->dev), hdmi);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Unable to request irq: %d\n", ret);
+		goto ereqirq;
+	}
+
+	return 0;
+
+ereqirq:
+	pm_runtime_disable(&pdev->dev);
+	iounmap(hdmi->base);
+emap:
+	release_mem_region(res->start, resource_size(res));
+ereqreg:
+	clk_disable(hdmi->hdmi_clk);
+eclkenable:
+erate:
+	clk_put(hdmi->hdmi_clk);
+egetclk:
+	kfree(hdmi);
+
+	return ret;
+}
+
+static int __exit sh_hdmi_remove(struct platform_device *pdev)
+{
+	struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
+	struct sh_hdmi *hdmi = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int irq = platform_get_irq(pdev, 0);
+
+	pdata->lcd_chan->board_cfg.display_on = NULL;
+	pdata->lcd_chan->board_cfg.display_off = NULL;
+	pdata->lcd_chan->board_cfg.board_data = NULL;
+
+	free_irq(irq, hdmi);
+	pm_runtime_disable(&pdev->dev);
+	cancel_delayed_work_sync(&hdmi->edid_work);
+	clk_disable(hdmi->hdmi_clk);
+	clk_put(hdmi->hdmi_clk);
+	iounmap(hdmi->base);
+	release_mem_region(res->start, resource_size(res));
+	kfree(hdmi);
+
+	return 0;
+}
+
+static struct platform_driver sh_hdmi_driver = {
+	.remove		= __exit_p(sh_hdmi_remove),
+	.driver = {
+		.name	= "sh-mobile-hdmi",
+	},
+};
+
+static int __init sh_hdmi_init(void)
+{
+	return platform_driver_probe(&sh_hdmi_driver, sh_hdmi_probe);
+}
+module_init(sh_hdmi_init);
+
+static void __exit sh_hdmi_exit(void)
+{
+	platform_driver_unregister(&sh_hdmi_driver);
+}
+module_exit(sh_hdmi_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_DESCRIPTION("SuperH / ARM-shmobile HDMI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index b9e6f93642d2..d72075a9f01c 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -56,6 +56,7 @@ static int lcdc_shared_regs[] = {
 /* per-channel registers */
 enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
        LDSM2R, LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR,
+       LDHAJR,
        NR_CH_REGS };
 
 static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
@@ -74,6 +75,7 @@ static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
 	[LDVLNR] = 0x450,
 	[LDVSYNR] = 0x454,
 	[LDPMR] = 0x460,
+	[LDHAJR] = 0x4a0,
 };
 
 static unsigned long lcdc_offs_sublcd[NR_CH_REGS] = {
@@ -137,6 +139,7 @@ struct sh_mobile_lcdc_priv {
 	struct clk *dot_clk;
 	unsigned long lddckr;
 	struct sh_mobile_lcdc_chan ch[2];
+	struct notifier_block notifier;
 	unsigned long saved_shared_regs[NR_SHARED_REGS];
 	int started;
 };
@@ -404,6 +407,56 @@ static void sh_mobile_lcdc_start_stop(struct sh_mobile_lcdc_priv *priv,
 		lcdc_write(priv, _LDDCKSTPR, 1); /* stop dotclock */
 }
 
+static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
+{
+	struct fb_var_screeninfo *var = &ch->info->var;
+	unsigned long h_total, hsync_pos;
+	u32 tmp;
+
+	tmp = ch->ldmt1r_value;
+	tmp |= (var->sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1 << 28;
+	tmp |= (var->sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1 << 27;
+	tmp |= (ch->cfg.flags & LCDC_FLAGS_DWPOL) ? 1 << 26 : 0;
+	tmp |= (ch->cfg.flags & LCDC_FLAGS_DIPOL) ? 1 << 25 : 0;
+	tmp |= (ch->cfg.flags & LCDC_FLAGS_DAPOL) ? 1 << 24 : 0;
+	tmp |= (ch->cfg.flags & LCDC_FLAGS_HSCNT) ? 1 << 17 : 0;
+	tmp |= (ch->cfg.flags & LCDC_FLAGS_DWCNT) ? 1 << 16 : 0;
+	lcdc_write_chan(ch, LDMT1R, tmp);
+
+	/* setup SYS bus */
+	lcdc_write_chan(ch, LDMT2R, ch->cfg.sys_bus_cfg.ldmt2r);
+	lcdc_write_chan(ch, LDMT3R, ch->cfg.sys_bus_cfg.ldmt3r);
+
+	/* horizontal configuration */
+	h_total = var->xres + var->hsync_len +
+		var->left_margin + var->right_margin;
+	tmp = h_total / 8; /* HTCN */
+	tmp |= (var->xres / 8) << 16; /* HDCN */
+	lcdc_write_chan(ch, LDHCNR, tmp);
+
+	hsync_pos = var->xres + var->right_margin;
+	tmp = hsync_pos / 8; /* HSYNP */
+	tmp |= (var->hsync_len / 8) << 16; /* HSYNW */
+	lcdc_write_chan(ch, LDHSYNR, tmp);
+
+	/* vertical configuration */
+	tmp = var->yres + var->vsync_len +
+		var->upper_margin + var->lower_margin; /* VTLN */
+	tmp |= var->yres << 16; /* VDLN */
+	lcdc_write_chan(ch, LDVLNR, tmp);
+
+	tmp = var->yres + var->lower_margin; /* VSYNP */
+	tmp |= var->vsync_len << 16; /* VSYNW */
+	lcdc_write_chan(ch, LDVSYNR, tmp);
+
+	/* Adjust horizontal synchronisation for HDMI */
+	tmp = ((var->xres & 7) << 24) |
+		((h_total & 7) << 16) |
+		((var->hsync_len & 7) << 8) |
+		hsync_pos;
+	lcdc_write_chan(ch, LDHAJR, tmp);
+}
+
 static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 {
 	struct sh_mobile_lcdc_chan *ch;
@@ -470,49 +523,11 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		if (!ch->enabled)
 			continue;
 
-		tmp = ch->ldmt1r_value;
-		tmp |= (lcd_cfg->sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1 << 28;
-		tmp |= (lcd_cfg->sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1 << 27;
-		tmp |= (ch->cfg.flags & LCDC_FLAGS_DWPOL) ? 1 << 26 : 0;
-		tmp |= (ch->cfg.flags & LCDC_FLAGS_DIPOL) ? 1 << 25 : 0;
-		tmp |= (ch->cfg.flags & LCDC_FLAGS_DAPOL) ? 1 << 24 : 0;
-		tmp |= (ch->cfg.flags & LCDC_FLAGS_HSCNT) ? 1 << 17 : 0;
-		tmp |= (ch->cfg.flags & LCDC_FLAGS_DWCNT) ? 1 << 16 : 0;
-		lcdc_write_chan(ch, LDMT1R, tmp);
-
-		/* setup SYS bus */
-		lcdc_write_chan(ch, LDMT2R, ch->cfg.sys_bus_cfg.ldmt2r);
-		lcdc_write_chan(ch, LDMT3R, ch->cfg.sys_bus_cfg.ldmt3r);
-
-		/* horizontal configuration */
-		tmp = lcd_cfg->xres + lcd_cfg->hsync_len;
-		tmp += lcd_cfg->left_margin;
-		tmp += lcd_cfg->right_margin;
-		tmp /= 8; /* HTCN */
-		tmp |= (lcd_cfg->xres / 8) << 16; /* HDCN */
-		lcdc_write_chan(ch, LDHCNR, tmp);
-
-		tmp = lcd_cfg->xres;
-		tmp += lcd_cfg->right_margin;
-		tmp /= 8; /* HSYNP */
-		tmp |= (lcd_cfg->hsync_len / 8) << 16; /* HSYNW */
-		lcdc_write_chan(ch, LDHSYNR, tmp);
+		sh_mobile_lcdc_geometry(ch);
 
 		/* power supply */
 		lcdc_write_chan(ch, LDPMR, 0);
 
-		/* vertical configuration */
-		tmp = lcd_cfg->yres + lcd_cfg->vsync_len;
-		tmp += lcd_cfg->upper_margin;
-		tmp += lcd_cfg->lower_margin; /* VTLN */
-		tmp |= lcd_cfg->yres << 16; /* VDLN */
-		lcdc_write_chan(ch, LDVLNR, tmp);
-
-		tmp = lcd_cfg->yres;
-		tmp += lcd_cfg->lower_margin; /* VSYNP */
-		tmp |= lcd_cfg->vsync_len << 16; /* VSYNW */
-		lcdc_write_chan(ch, LDVSYNR, tmp);
-
 		board_cfg = &ch->cfg.board_cfg;
 		if (board_cfg->setup_sys)
 			ret = board_cfg->setup_sys(board_cfg->board_data, ch,
@@ -943,6 +958,62 @@ static const struct dev_pm_ops sh_mobile_lcdc_dev_pm_ops = {
 	.runtime_resume = sh_mobile_lcdc_runtime_resume,
 };
 
+static int sh_mobile_lcdc_notify(struct notifier_block *nb,
+				 unsigned long action, void *data)
+{
+	struct fb_event *event = data;
+	struct fb_info *info = event->info;
+	struct sh_mobile_lcdc_chan *ch = info->par;
+	struct sh_mobile_lcdc_board_cfg	*board_cfg = &ch->cfg.board_cfg;
+	struct fb_var_screeninfo *var;
+
+	if (&ch->lcdc->notifier != nb)
+		return 0;
+
+	dev_dbg(info->dev, "%s(): action = %lu, data = %p\n",
+		__func__, action, event->data);
+
+	switch(action) {
+	case FB_EVENT_SUSPEND:
+		if (board_cfg->display_off)
+			board_cfg->display_off(board_cfg->board_data);
+		pm_runtime_put(info->device);
+		break;
+	case FB_EVENT_RESUME:
+		var = &info->var;
+
+		/* HDMI must be enabled before LCDC configuration */
+		if (board_cfg->display_on)
+			board_cfg->display_on(board_cfg->board_data, ch->info);
+
+		/* Check if the new display is not in our modelist */
+		if (ch->info->modelist.next &&
+		    !fb_match_mode(var, &ch->info->modelist)) {
+			struct fb_videomode mode;
+			int ret;
+
+			/* Can we handle this display? */
+			if (var->xres > ch->cfg.lcd_cfg.xres ||
+			    var->yres > ch->cfg.lcd_cfg.yres)
+				return -ENOMEM;
+
+			/* Add to the modelist */
+			fb_var_to_videomode(&mode, var);
+			ret = fb_add_videomode(&mode, &ch->info->modelist);
+			if (ret < 0)
+				return ret;
+		}
+
+		pm_runtime_get_sync(info->device);
+
+		sh_mobile_lcdc_geometry(ch);
+
+		break;
+	}
+
+	return 0;
+}
+
 static int sh_mobile_lcdc_remove(struct platform_device *pdev);
 
 static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
@@ -1031,6 +1102,8 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < j; i++) {
+		struct fb_var_screeninfo *var;
+		struct fb_videomode *lcd_cfg;
 		cfg = &priv->ch[i].cfg;
 
 		priv->ch[i].info = framebuffer_alloc(0, &pdev->dev);
@@ -1041,22 +1114,33 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		}
 
 		info = priv->ch[i].info;
+		var = &info->var;
+		lcd_cfg = &cfg->lcd_cfg;
 		info->fbops = &sh_mobile_lcdc_ops;
-		info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
-		info->var.yres = cfg->lcd_cfg.yres;
+		var->xres = var->xres_virtual = lcd_cfg->xres;
+		var->yres = lcd_cfg->yres;
 		/* Default Y virtual resolution is 2x panel size */
-		info->var.yres_virtual = info->var.yres * 2;
-		info->var.width = cfg->lcd_size_cfg.width;
-		info->var.height = cfg->lcd_size_cfg.height;
-		info->var.activate = FB_ACTIVATE_NOW;
-		error = sh_mobile_lcdc_set_bpp(&info->var, cfg->bpp);
+		var->yres_virtual = var->yres * 2;
+		var->width = cfg->lcd_size_cfg.width;
+		var->height = cfg->lcd_size_cfg.height;
+		var->activate = FB_ACTIVATE_NOW;
+		var->left_margin = lcd_cfg->left_margin;
+		var->right_margin = lcd_cfg->right_margin;
+		var->upper_margin = lcd_cfg->upper_margin;
+		var->lower_margin = lcd_cfg->lower_margin;
+		var->hsync_len = lcd_cfg->hsync_len;
+		var->vsync_len = lcd_cfg->vsync_len;
+		var->sync = lcd_cfg->sync;
+		var->pixclock = lcd_cfg->pixclock;
+
+		error = sh_mobile_lcdc_set_bpp(var, cfg->bpp);
 		if (error)
 			break;
 
 		info->fix = sh_mobile_lcdc_fix;
-		info->fix.line_length = cfg->lcd_cfg.xres * (cfg->bpp / 8);
+		info->fix.line_length = lcd_cfg->xres * (cfg->bpp / 8);
 		info->fix.smem_len = info->fix.line_length *
-			info->var.yres_virtual;
+			var->yres_virtual;
 
 		buf = dma_alloc_coherent(&pdev->dev, info->fix.smem_len,
 					 &priv->ch[i].dma_handle, GFP_KERNEL);
@@ -1121,10 +1205,14 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 			 ch->cfg.bpp);
 
 		/* deferred io mode: disable clock to save power */
-		if (info->fbdefio)
+		if (info->fbdefio || info->state == FBINFO_STATE_SUSPENDED)
 			sh_mobile_lcdc_clk_off(priv);
 	}
 
+	/* Failure ignored */
+	priv->notifier.notifier_call = sh_mobile_lcdc_notify;
+	fb_register_client(&priv->notifier);
+
 	return 0;
 err1:
 	sh_mobile_lcdc_remove(pdev);
@@ -1138,6 +1226,8 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 	struct fb_info *info;
 	int i;
 
+	fb_unregister_client(&priv->notifier);
+
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
 		if (priv->ch[i].info && priv->ch[i].info->dev)
 			unregister_framebuffer(priv->ch[i].info);
-- 
cgit v1.2.3


From 5aa9a2cbc037b2ec34b76619d233852d2d17b502 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Fri, 4 Jun 2010 03:07:34 +0200
Subject: [ARM] wm97xx_batt: remove now useless header file

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 drivers/power/wm97xx_battery.c | 16 ----------------
 1 file changed, 16 deletions(-)

(limited to 'drivers')

diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
index 4e8afce0c818..5071d85ec12d 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/wm97xx_battery.c
@@ -29,7 +29,6 @@ static DEFINE_MUTEX(bat_lock);
 static struct work_struct bat_work;
 static struct mutex work_lock;
 static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
-static struct wm97xx_batt_info *gpdata;
 static enum power_supply_property *prop;
 
 static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
@@ -172,12 +171,6 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
 	struct wm97xx_pdata *wmdata = dev->dev.platform_data;
 	struct wm97xx_batt_pdata *pdata;
 
-	if (gpdata) {
-		dev_err(&dev->dev, "Do not pass platform_data through "
-			"wm97xx_bat_set_pdata!\n");
-		return -EINVAL;
-	}
-
 	if (!wmdata) {
 		dev_err(&dev->dev, "No platform data supplied\n");
 		return -EINVAL;
@@ -308,15 +301,6 @@ static void __exit wm97xx_bat_exit(void)
 	platform_driver_unregister(&wm97xx_bat_driver);
 }
 
-/* The interface is deprecated, as well as linux/wm97xx_batt.h */
-void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
-
-void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
-{
-	gpdata = data;
-}
-EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata);
-
 module_init(wm97xx_bat_init);
 module_exit(wm97xx_bat_exit);
 
-- 
cgit v1.2.3


From a9c0629cdefd9c26746ece510fcc88357869685e Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Tue, 27 Jul 2010 21:48:10 +0200
Subject: [ARM] pxa/balloon3: PCMCIA Support

This driver adds support for the on-board CF socket.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 drivers/pcmcia/Kconfig           |   2 +-
 drivers/pcmcia/Makefile          |   1 +
 drivers/pcmcia/pxa2xx_balloon3.c | 158 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 160 insertions(+), 1 deletion(-)
 create mode 100644 drivers/pcmcia/pxa2xx_balloon3.c

(limited to 'drivers')

diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index d0f5ad306078..ef2f659ca161 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -215,7 +215,7 @@ config PCMCIA_PXA2XX
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
 		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
-		    || MACH_VPAC270)
+		    || MACH_VPAC270 || MACH_BALLOON3)
 	select PCMCIA_SOC_COMMON
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index d006e8beab9c..6a6077325527 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -70,6 +70,7 @@ pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
 pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
 pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
 pxa2xx-obj-$(CONFIG_MACH_VPAC270)		+= pxa2xx_vpac270.o
+pxa2xx-obj-$(CONFIG_MACH_BALLOON3)		+= pxa2xx_balloon3.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
 
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
new file mode 100644
index 000000000000..dbbdd0063202
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_balloon3.c
@@ -0,0 +1,158 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_balloon3.c
+ *
+ * Balloon3 PCMCIA specific routines.
+ *
+ *  Author:	Nick Bane
+ *  Created:	June, 2006
+ *  Copyright:	Toby Churchill Ltd
+ *  Derived from pxa2xx_mainstone.c, by Nico Pitre
+ *
+ * Various modification by Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/balloon3.h>
+
+#include "soc_common.h"
+
+/*
+ * These are a list of interrupt sources that provokes a polled
+ * check of status
+ */
+static struct pcmcia_irqs irqs[] = {
+	{ 0, BALLOON3_S0_CD_IRQ, "PCMCIA0 CD" },
+	{ 0, BALLOON3_BP_NSTSCHG_IRQ, "PCMCIA0 STSCHG" },
+};
+
+static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	uint16_t ver;
+	int ret;
+	static void __iomem *fpga_ver;
+
+	ver = __raw_readw(BALLOON3_FPGA_VER);
+	if (ver > 0x0201)
+		pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+			"PCMCIA/CF support might be broken in this version!",
+			ver);
+
+	skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ;
+	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void balloon3_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static unsigned long balloon3_pcmcia_status[2] = {
+	BALLOON3_CF_nSTSCHG_BVD1,
+	BALLOON3_CF_nSTSCHG_BVD1
+};
+
+static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				    struct pcmcia_state *state)
+{
+	uint16_t status;
+	int flip;
+
+	/* This actually reads the STATUS register */
+	status = __raw_readw(BALLOON3_CF_STATUS_REG);
+	flip = (status ^ balloon3_pcmcia_status[skt->nr])
+		& BALLOON3_CF_nSTSCHG_BVD1;
+	/*
+	 * Workaround for STSCHG which can't be deasserted:
+	 * We therefore disable/enable corresponding IRQs
+	 * as needed to avoid IRQ locks.
+	 */
+	if (flip) {
+		balloon3_pcmcia_status[skt->nr] = status;
+		if (status & BALLOON3_CF_nSTSCHG_BVD1)
+			enable_irq(BALLOON3_BP_NSTSCHG_IRQ);
+		else
+			disable_irq(BALLOON3_BP_NSTSCHG_IRQ);
+	}
+
+	state->detect	= !gpio_get_value(BALLOON3_GPIO_S0_CD);
+	state->ready	= !!(status & BALLOON3_CF_nIRQ);
+	state->bvd1	= !!(status & BALLOON3_CF_nSTSCHG_BVD1);
+	state->bvd2	= 0;	/* not available */
+	state->vs_3v	= 1;	/* Always true its a CF card */
+	state->vs_Xv	= 0;	/* not available */
+	state->wrprot	= 0;	/* not available */
+}
+
+static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				       const socket_state_t *state)
+{
+	__raw_writew((state->flags & SS_RESET) ? BALLOON3_CF_RESET : 0,
+			BALLOON3_CF_CONTROL_REG);
+	return 0;
+}
+
+static void balloon3_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void balloon3_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level balloon3_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+	.hw_init		= balloon3_pcmcia_hw_init,
+	.hw_shutdown		= balloon3_pcmcia_hw_shutdown,
+	.socket_state		= balloon3_pcmcia_socket_state,
+	.configure_socket	= balloon3_pcmcia_configure_socket,
+	.socket_init		= balloon3_pcmcia_socket_init,
+	.socket_suspend		= balloon3_pcmcia_socket_suspend,
+	.first			= 0,
+	.nr			= 1,
+};
+
+static struct platform_device *balloon3_pcmcia_device;
+
+static int __init balloon3_pcmcia_init(void)
+{
+	int ret;
+
+	balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!balloon3_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(balloon3_pcmcia_device,
+			&balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(balloon3_pcmcia_device);
+
+	if (ret)
+		platform_device_put(balloon3_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit balloon3_pcmcia_exit(void)
+{
+	platform_device_unregister(balloon3_pcmcia_device);
+}
+
+module_init(balloon3_pcmcia_init);
+module_exit(balloon3_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nick Bane <nick@cecomputing.co.uk>");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver");
-- 
cgit v1.2.3


From 8b526ae4ddd7a62397d99856079b59eda5d09360 Mon Sep 17 00:00:00 2001
From: Jongpill Lee <boyko.lee@samsung.com>
Date: Fri, 16 Jul 2010 10:19:41 +0900
Subject: ARM: SAMSUNG: serial: Add FRACVAL support for newer UART

Add support for the FRACVAL register on the newer UART blocks which provides
the same function as UDIVSLOT register but the FRACVAL is easier to implement.
To support UDIVSLOT register, UDIVSLOT table search is necessary though
supporting FRACVAL only needs the index value of UDIVSLOT table.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Acked-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 drivers/serial/samsung.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index a9d6c5626a0a..b1156ba8ad14 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -705,8 +705,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	if (ourport->info->has_divslot) {
 		unsigned int div = ourport->baudclk_rate / baud;
 
-		udivslot = udivslot_table[div & 15];
-		dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+		if (cfg->has_fracval) {
+			udivslot = (div & 15);
+			dbg("fracval = %04x\n", udivslot);
+		} else {
+			udivslot = udivslot_table[div & 15];
+			dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+		}
 	}
 
 	switch (termios->c_cflag & CSIZE) {
-- 
cgit v1.2.3


From acfdc56d541517266eeeeca3a4e5baafaa01c2a1 Mon Sep 17 00:00:00 2001
From: Jongpill Lee <boyko.lee@samsung.com>
Date: Fri, 16 Jul 2010 15:07:37 +0900
Subject: ARM: S5PV310: Add serial port support

This patch adds UART serial port support for S5PV310.
In the case of that serial device has just one clock source, driver can not
control clock source. So add check function in get_clksrc and set_clksrc.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Acked-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 drivers/serial/Kconfig   | 4 ++--
 drivers/serial/s5pv210.c | 8 ++++++++
 2 files changed, 10 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 8b23165bc5dc..aa220108cece 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -544,8 +544,8 @@ config SERIAL_S3C6400
 
 config SERIAL_S5PV210
 	tristate "Samsung S5PV210 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
-	select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310)
+	select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310)
 	default y
 	help
 	  Serial port support for Samsung's S5P Family of SoC's
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
index 4a789e5361a4..6ebccd70a707 100644
--- a/drivers/serial/s5pv210.c
+++ b/drivers/serial/s5pv210.c
@@ -28,8 +28,12 @@
 static int s5pv210_serial_setsource(struct uart_port *port,
 					struct s3c24xx_uart_clksrc *clk)
 {
+	struct s3c2410_uartcfg *cfg = port->dev->platform_data;
 	unsigned long ucon = rd_regl(port, S3C2410_UCON);
 
+	if ((cfg->clocks_size) == 1)
+		return 0;
+
 	if (strcmp(clk->name, "pclk") == 0)
 		ucon &= ~S5PV210_UCON_CLKMASK;
 	else if (strcmp(clk->name, "uclk1") == 0)
@@ -47,10 +51,14 @@ static int s5pv210_serial_setsource(struct uart_port *port,
 static int s5pv210_serial_getsource(struct uart_port *port,
 					struct s3c24xx_uart_clksrc *clk)
 {
+	struct s3c2410_uartcfg *cfg = port->dev->platform_data;
 	u32 ucon = rd_regl(port, S3C2410_UCON);
 
 	clk->divisor = 1;
 
+	if ((cfg->clocks_size) == 1)
+		return 0;
+
 	switch (ucon & S5PV210_UCON_CLKMASK) {
 	case S5PV210_UCON_PCLK:
 		clk->name = "pclk";
-- 
cgit v1.2.3


From e48add8c1c462fb10d6297b739a57ef599eb02ae Mon Sep 17 00:00:00 2001
From: Atul Dahiya <atul.dahiya@samsung.com>
Date: Tue, 20 Jul 2010 12:19:14 +0530
Subject: rtc: rtc-s3c: Updates RTC driver for clock enabling support

This Patch updates existing Samsung RTC driver for clock enabling support.

Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
---
 drivers/rtc/rtc-s3c.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'drivers')

diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 70b68d35f969..c032a15c84ab 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -1,4 +1,7 @@
 /* drivers/rtc/rtc-s3c.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
  *
  * Copyright (c) 2004,2006 Simtec Electronics
  *	Ben Dooks, <ben@simtec.co.uk>
@@ -39,6 +42,7 @@ enum s3c_cpu_type {
 
 static struct resource *s3c_rtc_mem;
 
+static struct clk *rtc_clk;
 static void __iomem *s3c_rtc_base;
 static int s3c_rtc_alarmno = NO_IRQ;
 static int s3c_rtc_tickno  = NO_IRQ;
@@ -431,6 +435,10 @@ static int __devexit s3c_rtc_remove(struct platform_device *dev)
 	s3c_rtc_setpie(&dev->dev, 0);
 	s3c_rtc_setaie(0);
 
+	clk_disable(rtc_clk);
+	clk_put(rtc_clk);
+	rtc_clk = NULL;
+
 	iounmap(s3c_rtc_base);
 	release_resource(s3c_rtc_mem);
 	kfree(s3c_rtc_mem);
@@ -488,6 +496,16 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 		goto err_nomap;
 	}
 
+	rtc_clk = clk_get(&pdev->dev, "rtc");
+	if (IS_ERR(rtc_clk)) {
+		dev_err(&pdev->dev, "failed to find rtc clock source\n");
+		ret = PTR_ERR(rtc_clk);
+		rtc_clk = NULL;
+		goto err_clk;
+	}
+
+	clk_enable(rtc_clk);
+
 	/* check to see if everything is setup correctly */
 
 	s3c_rtc_enable(pdev, 1);
@@ -523,6 +541,10 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 
  err_nortc:
 	s3c_rtc_enable(pdev, 0);
+	clk_disable(rtc_clk);
+	clk_put(rtc_clk);
+
+ err_clk:
 	iounmap(s3c_rtc_base);
 
  err_nomap:
-- 
cgit v1.2.3


From 2f3478f6579b3f8d4579b6d49d7a8e9376c48fc2 Mon Sep 17 00:00:00 2001
From: Atul Dahiya <atul.dahiya@samsung.com>
Date: Tue, 20 Jul 2010 16:02:51 +0530
Subject: rtc: rtc-s3c: Updates driver for S3C64XX and newer SoCs

This Patch does followings.
1) Enables support for alarm and time tick pending register
   for periodic interrupt generation.
2) Changes writeb to writew beacuse the macro S3C64XX_RTCCON_TICEN
   (Tick Timer Enable) is 9th bit of register.
3) Changes writeb to writel as max_user_freq used in s3c64xx is 32768 and
   requires 15 bits to update the Tick Count Register.

Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: Taekgyun Ko <taeggyun.ko@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
---
 drivers/rtc/rtc-s3c.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index c032a15c84ab..204001769ebc 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -57,6 +57,10 @@ static irqreturn_t s3c_rtc_alarmirq(int irq, void *id)
 	struct rtc_device *rdev = id;
 
 	rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
+
+	if (s3c_rtc_cpu_type == TYPE_S3C64XX)
+		writeb(S3C2410_INTP_ALM, s3c_rtc_base + S3C2410_INTP);
+
 	return IRQ_HANDLED;
 }
 
@@ -65,6 +69,10 @@ static irqreturn_t s3c_rtc_tickirq(int irq, void *id)
 	struct rtc_device *rdev = id;
 
 	rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
+
+	if (s3c_rtc_cpu_type == TYPE_S3C64XX)
+		writeb(S3C2410_INTP_TIC, s3c_rtc_base + S3C2410_INTP);
+
 	return IRQ_HANDLED;
 }
 
@@ -98,7 +106,7 @@ static int s3c_rtc_setpie(struct device *dev, int enabled)
 		if (enabled)
 			tmp |= S3C64XX_RTCCON_TICEN;
 
-		writeb(tmp, s3c_rtc_base + S3C2410_RTCCON);
+		writew(tmp, s3c_rtc_base + S3C2410_RTCCON);
 	} else {
 		tmp = readb(s3c_rtc_base + S3C2410_TICNT);
 		tmp &= ~S3C2410_TICNT_ENABLE;
@@ -132,7 +140,7 @@ static int s3c_rtc_setfreq(struct device *dev, int freq)
 
 	tmp |= (rtc_dev->max_user_freq / freq)-1;
 
-	writeb(tmp, s3c_rtc_base + S3C2410_TICNT);
+	writel(tmp, s3c_rtc_base + S3C2410_TICNT);
 	spin_unlock_irq(&s3c_rtc_pie_lock);
 
 	return 0;
-- 
cgit v1.2.3


From 051fe54e9f8c568dc9cd288b630d436ee93afe35 Mon Sep 17 00:00:00 2001
From: Taekgyun Ko <taeggyun.ko@samsung.com>
Date: Thu, 29 Jul 2010 13:00:42 +0900
Subject: rtc: rtc-s3c: Add BCD register initialization codes

RTC needs to be initialized when BCD registers have invalid value.

Signed-off-by: Taekgyun Ko <taeggyun.ko@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
---
 drivers/rtc/rtc-s3c.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers')

diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 204001769ebc..a0d3ec89d412 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -458,6 +458,7 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 	struct resource *res;
+	unsigned int tmp, i;
 	int ret;
 
 	pr_debug("%s: probe=%p\n", __func__, pdev);
@@ -536,6 +537,15 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 
 	s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
 
+	/* Check RTC Time */
+
+	for (i = S3C2410_RTCSEC; i <= S3C2410_RTCYEAR; i += 0x4) {
+		tmp = readb(s3c_rtc_base + i);
+
+		if ((tmp & 0xf) > 0x9 || ((tmp >> 4) & 0xf) > 0x9)
+			writeb(0, s3c_rtc_base + i);
+	}
+
 	if (s3c_rtc_cpu_type == TYPE_S3C64XX)
 		rtc->max_user_freq = 32768;
 	else
-- 
cgit v1.2.3


From 16f4efe7bf6cae180f72618ccc4027afee78123a Mon Sep 17 00:00:00 2001
From: Atul Dahiya <atul.dahiya@samsung.com>
Date: Tue, 20 Jul 2010 16:38:49 +0530
Subject: rtc: rtc-s3c: Add extra option to include RTC for Samsung SoCs

This patch adds HAVE_S3C_RTC to control inclusion of RTC driver for Samsung
SoCs. This option will help to include the driver only for the necessary
machines and not for any given arch.

Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
---
 drivers/rtc/Kconfig | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 10ba12c8c5e0..c43732ff1800 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -645,9 +645,16 @@ config RTC_DRV_OMAP
 	  DA8xx/OMAP-L13x chips.  This driver can also be built as a
 	  module called rtc-omap.
 
+config HAVE_S3C_RTC
+	bool
+	help
+	  This will include RTC support for Samsung SoCs. If
+	  you want to include RTC support for any machine, kindly
+	  select this in the respective mach-XXXX/Kconfig file.
+
 config RTC_DRV_S3C
 	tristate "Samsung S3C series SoC RTC"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on ARCH_S3C2410 || ARCH_S3C64XX || HAVE_S3C_RTC
 	help
 	  RTC (Realtime Clock) driver for the clock inbuilt into the
 	  Samsung S3C24XX series of SoCs. This can provide periodic
-- 
cgit v1.2.3


From 4b623926ba8e29393077fc3e01d1141a3ee2e2e9 Mon Sep 17 00:00:00 2001
From: Naveen Krishna Ch <ch.naveen@samsung.com>
Date: Thu, 29 Jul 2010 18:49:34 +0900
Subject: ARM: SAMSUNG: i2c/busses: Add HAVE_S3C2410_I2C option to include I2C
 for Samsung SoCs

This patch adds HAVE_S3C2410_I2C to control inclusion of I2C bus driver
on Samsung SoCs and makes I2C bus driver dependency SoC specific instead
of machine specific. This will enalbe all machines using Samsung ARCH_S3C2410,
_S3C64XX, _S5P6440, _S5PC100, and _S5PV210 to select the I2C driver by default

Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/Kconfig | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index bceafbfa7268..80143899ccec 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -521,12 +521,19 @@ config I2C_PXA_SLAVE
 	  is necessary for systems where the PXA may be a target on the
 	  I2C bus.
 
+config HAVE_S3C2410_I2C
+	bool
+	help
+	  This will include I2C support for Samsung SoCs. If you want to
+	  include I2C support for any machine, kindly select this in the
+	  respective Kconfig file.
+
 config I2C_S3C2410
 	tristate "S3C2410 I2C Driver"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on HAVE_S3C2410_I2C
 	help
 	  Say Y here to include support for I2C controller in the
-	  Samsung S3C2410 based System-on-Chip devices.
+	  Samsung SoCs.
 
 config I2C_S6000
 	tristate "S6000 I2C support"
-- 
cgit v1.2.3