From 662c738d9946de521dcece2b146dced335242389 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Wed, 29 Feb 2012 23:03:11 +0100 Subject: usb: otg: gpio_vbus: Add otg transceiver events and notifiers Commit 9ad63986c606 (pda_power: Add support for using otg transceiver events) converted the pda-power driver to use otg events to determine the status of the power supply. As gpio-vbus didn't use otg events until now, this change breaks setups of pda-power with a gpio-vbus transceiver. This patch adds the necessary otg events and notifiers to gpio-vbus. Signed-off-by: Heiko Stuebner Reviewed-by: Dima Zavin Signed-off-by: Felipe Balbi --- drivers/usb/otg/gpio_vbus.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c index 3ece43a2e4c1..a0a2178974fe 100644 --- a/drivers/usb/otg/gpio_vbus.c +++ b/drivers/usb/otg/gpio_vbus.c @@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work) struct gpio_vbus_data *gpio_vbus = container_of(work, struct gpio_vbus_data, work); struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data; - int gpio; + int gpio, status; if (!gpio_vbus->phy.otg->gadget) return; @@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work) */ gpio = pdata->gpio_pullup; if (is_vbus_powered(pdata)) { + status = USB_EVENT_VBUS; gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL; + gpio_vbus->phy.last_event = status; usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget); /* drawing a "unit load" is *always* OK, except for OTG */ @@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work) /* optionally enable D+ pullup */ if (gpio_is_valid(gpio)) gpio_set_value(gpio, !pdata->gpio_pullup_inverted); + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); } else { /* optionally disable D+ pullup */ if (gpio_is_valid(gpio)) @@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work) set_vbus_draw(gpio_vbus, 0); usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget); + status = USB_EVENT_NONE; gpio_vbus->phy.state = OTG_STATE_B_IDLE; + gpio_vbus->phy.last_event = status; + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); } } @@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev) irq, err); goto err_irq; } + + ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier); + INIT_WORK(&gpio_vbus->work, gpio_vbus_work); gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw"); -- cgit v1.2.3 From c85dcdac5852295cf6822f5c4331a6ddab72581f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 11 Apr 2012 16:09:10 -0400 Subject: USB: gadget: storage gadgets send wrong error code for unknown commands This patch (as1539) fixes a minor bug in the mass-storage gadget drivers. When an unknown command is received, the error code sent back is "Invalid Field in CDB" rather than "Invalid Command". This is because the bitmask of CDB bytes allowed to be nonzero is incorrect. When handling an unknown command, we don't care which command bytes are nonzero. All the bits in the mask should be set, not just eight of them. Signed-off-by: Alan Stern CC: CC: Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_mass_storage.c | 2 +- drivers/usb/gadget/file_storage.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index a371e966425f..cb8c162cae5a 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -2189,7 +2189,7 @@ unknown_cmnd: common->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", common->cmnd[0]); reply = check_command(common, common->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown); + DATA_DIR_UNKNOWN, ~0, 0, unknown); if (reply == 0) { common->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 4fac56927741..a896d73f7a93 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg) fsg->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); if ((reply = check_command(fsg, fsg->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) { + DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { fsg->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; } -- cgit v1.2.3 From 79cd76022044f8177bb00e3fd590ec8d6b5f8c35 Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Mon, 9 Apr 2012 09:22:28 -0500 Subject: Bluetooth: btusb: Add vendor specific ID (0489 e042) for BCM20702A0 T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e042 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DCA61B5 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Reported-by: Dennis Chua Signed-off-by: Manoj Iyer Signed-off-by: Johan Hedberg --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3311b812a0c6..9af450a0fc87 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -101,6 +101,7 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE(0x0c10, 0x0000) }, /* Broadcom BCM20702A0 */ + { USB_DEVICE(0x0489, 0xe042) }, { USB_DEVICE(0x0a5c, 0x21e3) }, { USB_DEVICE(0x0a5c, 0x21e6) }, { USB_DEVICE(0x0a5c, 0x21e8) }, -- cgit v1.2.3 From 87522a433ba6886b5ccbb497e0a7cb8097def64e Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Fri, 13 Apr 2012 17:39:57 +0800 Subject: Bluetooth: Add support for Atheros [13d3:3362] Add another vendor specific ID for Atheros AR3012 device. This chip is wrapped by IMC Networks. output of usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3362 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Johan Hedberg --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index ae9edca7b56d..639a1616402f 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -75,6 +75,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, + { USB_DEVICE(0x13d3, 0x3362) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -94,6 +95,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 9af450a0fc87..a497544a87e8 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -134,6 +134,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From fc1a93bd9bad32581bca1e66fb7b3cabad9b3361 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 9 Apr 2012 17:49:36 -0400 Subject: intel_ips: Hush the i915 symbols message We can't control order here, and getting it inverted is harmless. So turn this down to dev_info() and leave a note about how to fix it in case userspace is insufficiently automagic. Bugzilla: https://bugzilla.redhat.com/794953 Signed-off-by: Adam Jackson Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_ips.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index f7ba316e0ed6..0ffdb3cde2bb 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -1565,7 +1565,7 @@ static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id) ips->poll_turbo_status = true; if (!ips_get_i915_syms(ips)) { - dev_err(&dev->dev, "failed to get i915 symbols, graphics turbo disabled\n"); + dev_info(&dev->dev, "failed to get i915 symbols, graphics turbo disabled until i915 loads\n"); ips->gpu_turbo_enabled = false; } else { dev_dbg(&dev->dev, "graphics turbo enabled\n"); -- cgit v1.2.3 From d62d421b071b08249361044d8e56c8b5c3ed6aa7 Mon Sep 17 00:00:00 2001 From: Martin Nyhus Date: Thu, 15 Mar 2012 18:25:48 +0100 Subject: dell-laptop: Terminate quirks list properly Add missing DMI_NONE entry to end of the quirks list so dmi_check_system() won't read past the end of the list. Signed-off-by: Martin Nyhus Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index a05fc9c955d8..e6c08ee8d46c 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -212,6 +212,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { }, .driver_data = &quirk_dell_vostro_v130, }, + { } }; static struct calling_interface_buffer *buffer; -- cgit v1.2.3 From eb798c641a34ae9cee9fcacfbe5dd40bd7777607 Mon Sep 17 00:00:00 2001 From: Vinit Shenoy Date: Tue, 17 Apr 2012 12:40:13 +0530 Subject: spi/pl022: Fix range checking for bits per word pl022 ssp controller supports word lengths from 4 to 16 (or 32) bits. Currently implemented checks were incorrect. It has following check if (pl022->vendor->max_bpw >= 32) which must be checking for <=. Also error print message is incorrect, that prints "range is from 1 to 16". Fix both these issues. Signed-off-by: Vinit Shenoy Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/spi-pl022.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 09c925aaf320..1ead49dbebce 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1823,9 +1823,12 @@ static int pl022_setup(struct spi_device *spi) } else chip->cs_control = chip_info->cs_control; - if (bits <= 3) { - /* PL022 doesn't support less than 4-bits */ + /* Check bits per word with vendor specific range */ + if ((bits <= 3) || (bits > pl022->vendor->max_bpw)) { status = -ENOTSUPP; + dev_err(&spi->dev, "illegal data size for this controller!\n"); + dev_err(&spi->dev, "This controller can only handle 4 <= n <= %d bit words\n", + pl022->vendor->max_bpw); goto err_config_params; } else if (bits <= 8) { dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); @@ -1838,20 +1841,10 @@ static int pl022_setup(struct spi_device *spi) chip->read = READING_U16; chip->write = WRITING_U16; } else { - if (pl022->vendor->max_bpw >= 32) { - dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); - chip->n_bytes = 4; - chip->read = READING_U32; - chip->write = WRITING_U32; - } else { - dev_err(&spi->dev, - "illegal data size for this controller!\n"); - dev_err(&spi->dev, - "a standard pl022 can only handle " - "1 <= n <= 16 bit words\n"); - status = -ENOTSUPP; - goto err_config_params; - } + dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); + chip->n_bytes = 4; + chip->read = READING_U32; + chip->write = WRITING_U32; } /* Now Initialize all register settings required for this chip */ -- cgit v1.2.3 From fc87e080e19fdeb1120ce274423fea7b2ec2f63e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 18 Apr 2012 13:49:20 +0300 Subject: usb: musb: drop __deprecated flag Looks like we cannot live without that double_buffer_not_ok flag due to many HW bugs this MUSB core has. So, let's drop the __deprecated flag to avoid annoying compile warnings. Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 93de517a32a0..f4a40f001c88 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -449,7 +449,7 @@ struct musb { * We added this flag to forcefully disable double * buffering until we get it working. */ - unsigned double_buffer_not_ok:1 __deprecated; + unsigned double_buffer_not_ok:1; struct musb_hdrc_config *config; -- cgit v1.2.3 From c67dd31c5cc745e72d033c0e7d4a2da67c90cd88 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Apr 2012 17:03:10 +0200 Subject: usb: musb: davinci.c: add missing unregister usb_nop_xceiv_unregister is needed on failure of usb_get_transceiver, as done in other error-handling code in the same function. Signed-off-by: Julia Lawall Signed-off-by: Felipe Balbi --- drivers/usb/musb/davinci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 97ab975fa442..768b4b55c816 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb) usb_nop_xceiv_register(); musb->xceiv = usb_get_transceiver(); if (!musb->xceiv) - return -ENODEV; + goto unregister; musb->mregs += DAVINCI_BASE_OFFSET; @@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb) fail: usb_put_transceiver(musb->xceiv); +unregister: usb_nop_xceiv_unregister(); return -ENODEV; } -- cgit v1.2.3 From ac71311e65e2c4c2dbac76db698fecbee755b016 Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 19 Apr 2012 14:53:45 +0800 Subject: Bluetooth: Add support for AR3012 [0cf3:e004] Add another vendor specific ID for Atheros AR3012 output of usb-devices: T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e004 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/922715 Signed-off-by: AceLan Kao Signed-off-by: Marcel Holtmann --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 639a1616402f..57fd867553d7 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -76,6 +76,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x13d3, 0x3362) }, + { USB_DEVICE(0x0CF3, 0xE004) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -96,6 +97,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a497544a87e8..93cc828298c4 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -135,6 +135,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 15b120d67019d691e4389372967332d74a80522a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 18 Apr 2012 13:59:30 +0300 Subject: usb: gadget: dummy: do not call pullup() on udc_stop() pullup() is already called properly by udc-core.c and there's no need to call it from udc_stop(), in fact that will cause issues. Cc: stable@vger.kernel.org Reviewed-by: Alexander Shishkin Acked-by: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/gadget/dummy_hcd.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index a6dfd2164166..170cbe89d9f8 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g, dum->driver = NULL; - dummy_pullup(&dum->gadget, 0); return 0; } -- cgit v1.2.3 From 60f2951e3ad9b833bc12e2ea7652be2611771792 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 20 Apr 2012 15:28:07 +0530 Subject: dmaengine: imx-dma: dont complete descriptor for cyclic dma the cookie updates completed the cyclic dma descriptor wrongly. This caused the BUG_ON to be hit as submit is called for completed descriptor Fix this by not marking the cyclic descriptor as complete Tested-by: Javier Martin Signed-off-by: Vinod Koul --- drivers/dma/imx-dma.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index a45b5d2a5987..bb787d8e1529 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -571,11 +571,14 @@ static void imxdma_tasklet(unsigned long data) if (desc->desc.callback) desc->desc.callback(desc->desc.callback_param); - dma_cookie_complete(&desc->desc); - - /* If we are dealing with a cyclic descriptor keep it on ld_active */ + /* If we are dealing with a cyclic descriptor keep it on ld_active + * and dont mark the descripor as complete. + * Only in non-cyclic cases it would be marked as complete + */ if (imxdma_chan_is_doing_cyclic(imxdmac)) goto out; + else + dma_cookie_complete(&desc->desc); /* Free 2D slot if it was an interleaved transfer */ if (imxdmac->enabled_2d) { -- cgit v1.2.3 From d04525ed0323709711277563a2c76e446a017423 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 11 Apr 2012 13:29:31 +0800 Subject: dma: mxs-dma: enable channel in device_issue_pending call Enable channel in device_issue_pending call, so that the order between cookie assignment and channel enabling can be ensured naturally. It fixes the mxs gpmi-nand breakage which is caused by the incorrect order of cookie assigning and channel enabling. Suggested-by: Russell King Signed-off-by: Shawn Guo Tested-by: Huang Shijie Tested-by Signed-off-by: Vinod Koul --- drivers/dma/mxs-dma.c | 10 +++------- drivers/mmc/host/mxs-mmc.c | 3 +++ drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 1 + 3 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index c81ef7e10e08..655d4ce6ed0d 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -201,10 +201,6 @@ static struct mxs_dma_chan *to_mxs_dma_chan(struct dma_chan *chan) static dma_cookie_t mxs_dma_tx_submit(struct dma_async_tx_descriptor *tx) { - struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(tx->chan); - - mxs_dma_enable_chan(mxs_chan); - return dma_cookie_assign(tx); } @@ -558,9 +554,9 @@ static enum dma_status mxs_dma_tx_status(struct dma_chan *chan, static void mxs_dma_issue_pending(struct dma_chan *chan) { - /* - * Nothing to do. We only have a single descriptor. - */ + struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); + + mxs_dma_enable_chan(mxs_chan); } static int __init mxs_dma_init(struct mxs_dma_engine *mxs_dma) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index b0f2ef988188..e3f5af96ab87 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -363,6 +363,7 @@ static void mxs_mmc_bc(struct mxs_mmc_host *host) goto out; dmaengine_submit(desc); + dma_async_issue_pending(host->dmach); return; out: @@ -403,6 +404,7 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host) goto out; dmaengine_submit(desc); + dma_async_issue_pending(host->dmach); return; out: @@ -531,6 +533,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host) goto out; dmaengine_submit(desc); + dma_async_issue_pending(host->dmach); return; out: dev_warn(mmc_dev(host->mmc), diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 75b1dde16358..9ec51cec2e14 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -266,6 +266,7 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this, desc->callback = dma_irq_callback; desc->callback_param = this; dmaengine_submit(desc); + dma_async_issue_pending(get_dma_chan(this)); /* Wait for the interrupt from the DMA block. */ err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000)); -- cgit v1.2.3 From ed8b0d67f33518a16c6b2450fe5ebebf180c2d04 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 16 Apr 2012 14:46:30 +0200 Subject: dmaengine: at_hdmac: remove clear-on-read in atc_dostart() This loop on EBCISR register was designed to clear IRQ sources before enabling a DMA channel. This register is clear-on-read so a race condition can appear if another channel is already active and has just finished its transfer. Removing this read on EBCISR is fixing the issue as there is no case where an IRQ could be pending: we already make sure that this register is drained at probe() time and during resume. Signed-off-by: Nicolas Ferre Cc: stable Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 7aa58d204892..445fdf811695 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -221,10 +221,6 @@ static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first) vdbg_dump_regs(atchan); - /* clear any pending interrupt */ - while (dma_readl(atdma, EBCISR)) - cpu_relax(); - channel_writel(atchan, SADDR, 0); channel_writel(atchan, DADDR, 0); channel_writel(atchan, CTRLA, 0); -- cgit v1.2.3 From 899c612d74d4a242158a4db20367388d6299c028 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 20 Apr 2012 22:34:49 -0700 Subject: Input: synaptics - fix regression with "image sensor" trackpads commit 7968a5dd492ccc38345013e534ad4c8d6eb60ed1 Input: synaptics - add support for Relative mode Accidentally broke support for advanced gestures (multitouch) on some trackpads such as the one in my ThinkPad X220 by incorretly changing the condition for enabling them. This restores it. Signed-off-by: Benjamin Herrenschmidt CC: stable@kernel.org [3.3] Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 8081a0a5d602..a4b14a41cbf4 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -274,7 +274,8 @@ static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse) static unsigned char param = 0xc8; struct synaptics_data *priv = psmouse->private; - if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) + if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) || + SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c))) return 0; if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL)) -- cgit v1.2.3 From e95c8438ea1c56c254f0607c8fb6bca7f463c744 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 20 Apr 2012 21:03:36 +0200 Subject: drm/i915: fixup load-detect on enabled, but not active pipe Somehow we have a fast-path that tries to avoid going through the load-detect code when the encode already has a crtc associated. But this fails horribly when the crtc is off. The load detect pipe itself manages this case well (and also does not forget to restore the dpms state), so just rip out this special case. The issue seems to go back all the way to the commit that originally introduced load-detection on the vga output: commit e4a5d54f924ea5ce2913d9d0687d034004816465 Author: Ma Ling Date: Tue May 26 11:31:00 2009 +0800 drm/i915: Add support for VGA load detection (pre-945). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43020 Reported-by: Jean Delvare Reviewed-by: Chris Wilson Signed-Off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 4d3d736a4f56..90b9793fd5da 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -430,8 +430,8 @@ intel_crt_detect(struct drm_connector *connector, bool force) { struct drm_device *dev = connector->dev; struct intel_crt *crt = intel_attached_crt(connector); - struct drm_crtc *crtc; enum drm_connector_status status; + struct intel_load_detect_pipe tmp; if (I915_HAS_HOTPLUG(dev)) { if (intel_crt_detect_hotplug(connector)) { @@ -450,23 +450,16 @@ intel_crt_detect(struct drm_connector *connector, bool force) return connector->status; /* for pre-945g platforms use load detect */ - crtc = crt->base.base.crtc; - if (crtc && crtc->enabled) { - status = intel_crt_load_detect(crt); - } else { - struct intel_load_detect_pipe tmp; - - if (intel_get_load_detect_pipe(&crt->base, connector, NULL, - &tmp)) { - if (intel_crt_detect_ddc(connector)) - status = connector_status_connected; - else - status = intel_crt_load_detect(crt); - intel_release_load_detect_pipe(&crt->base, connector, - &tmp); - } else - status = connector_status_unknown; - } + if (intel_get_load_detect_pipe(&crt->base, connector, NULL, + &tmp)) { + if (intel_crt_detect_ddc(connector)) + status = connector_status_connected; + else + status = intel_crt_load_detect(crt); + intel_release_load_detect_pipe(&crt->base, connector, + &tmp); + } else + status = connector_status_unknown; return status; } -- cgit v1.2.3 From 6f381fa344911d5a234b13574433cf23036f9467 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 12 Apr 2012 13:50:38 +0800 Subject: [SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, __scsi_alloc_queue uses SCSI host's parent device as DMA device to set segment boundary. But the parent device may not refer to the DMA device. For example, for ATA disk, SCSI host's parent device now refers to ATA port. Since commit d139b9b([SCSI] scsi_lib_dma: fix bug with dma maps on nested scsi objects), a new field Scsi_Host->dma_dev was introduced to refer to the real DMA device. Use ->dma_dev in __scsi_alloc_queue to correctly set segment boundary. Bug report: http://marc.info/?l=linux-ide&m=133177818318187&w=2 Reported-and-tested-by: Jörg Sommer Signed-off-by: Lin Ming Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ead6405f3e51..5dfd7495d1a1 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1638,7 +1638,7 @@ struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost, request_fn_proc *request_fn) { struct request_queue *q; - struct device *dev = shost->shost_gendev.parent; + struct device *dev = shost->dma_dev; q = blk_init_queue(request_fn, NULL); if (!q) -- cgit v1.2.3 From f8fc75dc576eac0c996e4a792a4701819d999260 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 12 Apr 2012 13:50:39 +0800 Subject: [SCSI] libata: Pass correct DMA device to scsi host MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use scsi_add_host_with_dma in ata_scsi_add_hosts to pass in the correct DMA device(ATA host). Bug report: http://marc.info/?l=linux-ide&m=133177818318187&w=2 Reported-and-tested-by: Jörg Sommer Acked-by: Jeff Garzik Signed-off-by: Lin Ming Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 93dabdcd2cbe..7832b1ad2327 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3399,7 +3399,8 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) */ shost->max_host_blocked = 1; - rc = scsi_add_host(ap->scsi_host, &ap->tdev); + rc = scsi_add_host_with_dma(ap->scsi_host, + &ap->tdev, ap->host->dev); if (rc) goto err_add; } -- cgit v1.2.3 From 6c557cfee08751d22aed34840f389b846f0f4508 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 4 Apr 2012 10:34:37 +0200 Subject: i2c: pnx: Disable clk in suspend In the driver's suspend function, clk_enable() was used instead of clk_disable(). This is corrected with this patch. Signed-off-by: Roland Stigge Reviewed-by: Arnd Bergmann CC: stable@vger.kernel.org [wsa: reworded commit header slightly] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pnx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 04be9f82e14b..eb8ad538c79f 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -546,8 +546,7 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev, { struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev); - /* FIXME: shouldn't this be clk_disable? */ - clk_enable(alg_data->clk); + clk_disable(alg_data->clk); return 0; } -- cgit v1.2.3 From f70893d08338b9cab8008d2e30404ce58930a513 Mon Sep 17 00:00:00 2001 From: Alok Chauhan Date: Mon, 2 Apr 2012 11:23:02 +0530 Subject: i2c: tegra: Add delay before resetting the controller after NACK NACK interrupt is generated before I2C controller generates the STOP condition on bus. Because of this reset of controller is happening before I2C controller could complete STOP condition. So wait for some time before resetting the controller so that STOP condition has delivered properly on bus. Added delay of 2 clock period before resetting the controller in case of NACK error. Signed-off-by: Alok Chauhan Acked-by: Stephen Warren [wsa: Reworded the commit msg and code comment a bit] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index e978635e60f0..55e5ea62ccee 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -516,6 +516,14 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, if (likely(i2c_dev->msg_err == I2C_ERR_NONE)) return 0; + /* + * NACK interrupt is generated before the I2C controller generates the + * STOP condition on the bus. So wait for 2 clock periods before resetting + * the controller so that STOP condition has been delivered properly. + */ + if (i2c_dev->msg_err == I2C_ERR_NO_ACK) + udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate)); + tegra_i2c_init(i2c_dev); if (i2c_dev->msg_err == I2C_ERR_NO_ACK) { if (msg->flags & I2C_M_IGNORE_NAK) -- cgit v1.2.3 From 8a52f9f347da721b199b7f9dcc0168bbe7d0baae Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 26 Mar 2012 14:55:25 +0900 Subject: i2c-eg20t: change timeout value 50msec to 1000msec Currently, during i2c works alone, wait-event timeout is not occurred. However, as CPU load increases, timeout occurs frequently. So, I modified like this patch. Modifying like this patch, I've never seen the timeout event with high load test. Signed-off-by: Tomoya MORINAGA Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-eg20t.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index f086131cb1c7..4a46c8b18188 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -324,7 +324,7 @@ static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap) { long ret; ret = wait_event_timeout(pch_event, - (adap->pch_event_flag != 0), msecs_to_jiffies(50)); + (adap->pch_event_flag != 0), msecs_to_jiffies(1000)); if (ret == 0) { pch_err(adap, "timeout: %x\n", adap->pch_event_flag); -- cgit v1.2.3 From 096407136769ec10690abe1baba092abcb763662 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 26 Mar 2012 14:55:23 +0900 Subject: i2c-eg20t: Modify MODULE_AUTHOR's email address Signed-off-by: Tomoya MORINAGA Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-eg20t.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 4a46c8b18188..c811289b61e2 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -1063,6 +1063,6 @@ module_exit(pch_pci_exit); MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C"); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Tomoya MORINAGA. "); +MODULE_AUTHOR("Tomoya MORINAGA. "); module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR)); module_param(pch_clk, int, (S_IRUSR | S_IWUSR)); -- cgit v1.2.3 From eae1415dda93fd4edcce0637aa64b3c9b567563f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 20 Apr 2012 11:39:17 -0400 Subject: hwmon: (ad7314) Fix build warning The following build warning is seen in some configurations. drivers/hwmon/ad7314.c: In function 'ad7314_show_temperature': drivers/hwmon/ad7314.c:70: warning: 'data' may be used uninitialized in this function Fix by overloading the return value from ad7314_spi_read with both data and error code (the returned data is really u16 and needs to be converted into a signed value anyway). Signed-off-by: Guenter Roeck Cc: Jonathan Cameron Acked-by: Jean Delvare --- drivers/hwmon/ad7314.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c index ce43642ef03e..f85ce70d9677 100644 --- a/drivers/hwmon/ad7314.c +++ b/drivers/hwmon/ad7314.c @@ -47,7 +47,7 @@ struct ad7314_data { u16 rx ____cacheline_aligned; }; -static int ad7314_spi_read(struct ad7314_data *chip, s16 *data) +static int ad7314_spi_read(struct ad7314_data *chip) { int ret; @@ -57,9 +57,7 @@ static int ad7314_spi_read(struct ad7314_data *chip, s16 *data) return ret; } - *data = be16_to_cpu(chip->rx); - - return ret; + return be16_to_cpu(chip->rx); } static ssize_t ad7314_show_temperature(struct device *dev, @@ -70,12 +68,12 @@ static ssize_t ad7314_show_temperature(struct device *dev, s16 data; int ret; - ret = ad7314_spi_read(chip, &data); + ret = ad7314_spi_read(chip); if (ret < 0) return ret; switch (spi_get_device_id(chip->spi_dev)->driver_data) { case ad7314: - data = (data & AD7314_TEMP_MASK) >> AD7314_TEMP_OFFSET; + data = (ret & AD7314_TEMP_MASK) >> AD7314_TEMP_OFFSET; data = (data << 6) >> 6; return sprintf(buf, "%d\n", 250 * data); @@ -86,7 +84,7 @@ static ssize_t ad7314_show_temperature(struct device *dev, * with a sign bit - which is a 14 bit 2's complement * register. 1lsb - 31.25 milli degrees centigrade */ - data &= ADT7301_TEMP_MASK; + data = ret & ADT7301_TEMP_MASK; data = (data << 2) >> 2; return sprintf(buf, "%d\n", -- cgit v1.2.3 From 22b9153faa2263aa89625de25e71c7d44c8dbd16 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 9 Mar 2012 11:00:06 -0800 Subject: [SCSI] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_work When requeuing work to a draining workqueue the last work instance may not be idle, so sas_queue_work() must not touch work->entry. Introduce sas_work with a drain_node list_head to have a private list for collecting work deferred due to drain collision. Fixes reports like: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] process_one_work+0x2e/0x338 Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 28 ++++++++++++++-------------- drivers/scsi/libsas/sas_event.c | 24 +++++++++++++----------- drivers/scsi/libsas/sas_init.c | 11 +++++------ drivers/scsi/libsas/sas_internal.h | 6 +++--- drivers/scsi/libsas/sas_phy.c | 21 +++++++-------------- drivers/scsi/libsas/sas_port.c | 15 +++++---------- 6 files changed, 47 insertions(+), 58 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 364679675602..c7ac88288bf1 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -205,8 +205,7 @@ void sas_notify_lldd_dev_gone(struct domain_device *dev) static void sas_probe_devices(struct work_struct *work) { struct domain_device *dev, *n; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; clear_bit(DISCE_PROBE, &port->disc.pending); @@ -291,8 +290,7 @@ static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_d static void sas_destruct_devices(struct work_struct *work) { struct domain_device *dev, *n; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; clear_bit(DISCE_DESTRUCT, &port->disc.pending); @@ -377,8 +375,7 @@ static void sas_discover_domain(struct work_struct *work) { struct domain_device *dev; int error = 0; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; clear_bit(DISCE_DISCOVER_DOMAIN, &port->disc.pending); @@ -437,8 +434,7 @@ static void sas_discover_domain(struct work_struct *work) static void sas_revalidate_domain(struct work_struct *work) { int res = 0; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; struct sas_ha_struct *ha = port->ha; @@ -466,21 +462,25 @@ static void sas_revalidate_domain(struct work_struct *work) /* ---------- Events ---------- */ -static void sas_chain_work(struct sas_ha_struct *ha, struct work_struct *work) +static void sas_chain_work(struct sas_ha_struct *ha, struct sas_work *sw) { - /* chained work is not subject to SA_HA_DRAINING or SAS_HA_REGISTERED */ - scsi_queue_work(ha->core.shost, work); + /* chained work is not subject to SA_HA_DRAINING or + * SAS_HA_REGISTERED, because it is either submitted in the + * workqueue, or known to be submitted from a context that is + * not racing against draining + */ + scsi_queue_work(ha->core.shost, &sw->work); } static void sas_chain_event(int event, unsigned long *pending, - struct work_struct *work, + struct sas_work *sw, struct sas_ha_struct *ha) { if (!test_and_set_bit(event, pending)) { unsigned long flags; spin_lock_irqsave(&ha->state_lock, flags); - sas_chain_work(ha, work); + sas_chain_work(ha, sw); spin_unlock_irqrestore(&ha->state_lock, flags); } } @@ -519,7 +519,7 @@ void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port) disc->pending = 0; for (i = 0; i < DISC_NUM_EVENTS; i++) { - INIT_WORK(&disc->disc_work[i].work, sas_event_fns[i]); + INIT_SAS_WORK(&disc->disc_work[i].work, sas_event_fns[i]); disc->disc_work[i].port = port; } } diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c index 16639bbae629..4e4292d210c1 100644 --- a/drivers/scsi/libsas/sas_event.c +++ b/drivers/scsi/libsas/sas_event.c @@ -27,19 +27,21 @@ #include "sas_internal.h" #include "sas_dump.h" -void sas_queue_work(struct sas_ha_struct *ha, struct work_struct *work) +void sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw) { if (!test_bit(SAS_HA_REGISTERED, &ha->state)) return; - if (test_bit(SAS_HA_DRAINING, &ha->state)) - list_add(&work->entry, &ha->defer_q); - else - scsi_queue_work(ha->core.shost, work); + if (test_bit(SAS_HA_DRAINING, &ha->state)) { + /* add it to the defer list, if not already pending */ + if (list_empty(&sw->drain_node)) + list_add(&sw->drain_node, &ha->defer_q); + } else + scsi_queue_work(ha->core.shost, &sw->work); } static void sas_queue_event(int event, unsigned long *pending, - struct work_struct *work, + struct sas_work *work, struct sas_ha_struct *ha) { if (!test_and_set_bit(event, pending)) { @@ -55,7 +57,7 @@ static void sas_queue_event(int event, unsigned long *pending, void __sas_drain_work(struct sas_ha_struct *ha) { struct workqueue_struct *wq = ha->core.shost->work_q; - struct work_struct *w, *_w; + struct sas_work *sw, *_sw; set_bit(SAS_HA_DRAINING, &ha->state); /* flush submitters */ @@ -66,9 +68,9 @@ void __sas_drain_work(struct sas_ha_struct *ha) spin_lock_irq(&ha->state_lock); clear_bit(SAS_HA_DRAINING, &ha->state); - list_for_each_entry_safe(w, _w, &ha->defer_q, entry) { - list_del_init(&w->entry); - sas_queue_work(ha, w); + list_for_each_entry_safe(sw, _sw, &ha->defer_q, drain_node) { + list_del_init(&sw->drain_node); + sas_queue_work(ha, sw); } spin_unlock_irq(&ha->state_lock); } @@ -151,7 +153,7 @@ int sas_init_events(struct sas_ha_struct *sas_ha) int i; for (i = 0; i < HA_NUM_EVENTS; i++) { - INIT_WORK(&sas_ha->ha_events[i].work, sas_ha_event_fns[i]); + INIT_SAS_WORK(&sas_ha->ha_events[i].work, sas_ha_event_fns[i]); sas_ha->ha_events[i].ha = sas_ha; } diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index 120bff64be30..10cb5ae30977 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -94,8 +94,7 @@ void sas_hash_addr(u8 *hashed, const u8 *sas_addr) void sas_hae_reset(struct work_struct *work) { - struct sas_ha_event *ev = - container_of(work, struct sas_ha_event, work); + struct sas_ha_event *ev = to_sas_ha_event(work); struct sas_ha_struct *ha = ev->ha; clear_bit(HAE_RESET, &ha->pending); @@ -369,14 +368,14 @@ static void sas_phy_release(struct sas_phy *phy) static void phy_reset_work(struct work_struct *work) { - struct sas_phy_data *d = container_of(work, typeof(*d), reset_work); + struct sas_phy_data *d = container_of(work, typeof(*d), reset_work.work); d->reset_result = transport_sas_phy_reset(d->phy, d->hard_reset); } static void phy_enable_work(struct work_struct *work) { - struct sas_phy_data *d = container_of(work, typeof(*d), enable_work); + struct sas_phy_data *d = container_of(work, typeof(*d), enable_work.work); d->enable_result = sas_phy_enable(d->phy, d->enable); } @@ -389,8 +388,8 @@ static int sas_phy_setup(struct sas_phy *phy) return -ENOMEM; mutex_init(&d->event_lock); - INIT_WORK(&d->reset_work, phy_reset_work); - INIT_WORK(&d->enable_work, phy_enable_work); + INIT_SAS_WORK(&d->reset_work, phy_reset_work); + INIT_SAS_WORK(&d->enable_work, phy_enable_work); d->phy = phy; phy->hostdata = d; diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index f05c63879949..507e4cf12e56 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -45,10 +45,10 @@ struct sas_phy_data { struct mutex event_lock; int hard_reset; int reset_result; - struct work_struct reset_work; + struct sas_work reset_work; int enable; int enable_result; - struct work_struct enable_work; + struct sas_work enable_work; }; void sas_scsi_recover_host(struct Scsi_Host *shost); @@ -80,7 +80,7 @@ void sas_porte_broadcast_rcvd(struct work_struct *work); void sas_porte_link_reset_err(struct work_struct *work); void sas_porte_timer_event(struct work_struct *work); void sas_porte_hard_reset(struct work_struct *work); -void sas_queue_work(struct sas_ha_struct *ha, struct work_struct *work); +void sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw); int sas_notify_lldd_dev_found(struct domain_device *); void sas_notify_lldd_dev_gone(struct domain_device *); diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c index dcfd4a9105c5..521422e857ab 100644 --- a/drivers/scsi/libsas/sas_phy.c +++ b/drivers/scsi/libsas/sas_phy.c @@ -32,8 +32,7 @@ static void sas_phye_loss_of_signal(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PHYE_LOSS_OF_SIGNAL, &phy->phy_events_pending); @@ -43,8 +42,7 @@ static void sas_phye_loss_of_signal(struct work_struct *work) static void sas_phye_oob_done(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PHYE_OOB_DONE, &phy->phy_events_pending); @@ -53,8 +51,7 @@ static void sas_phye_oob_done(struct work_struct *work) static void sas_phye_oob_error(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; struct sas_ha_struct *sas_ha = phy->ha; struct asd_sas_port *port = phy->port; @@ -85,8 +82,7 @@ static void sas_phye_oob_error(struct work_struct *work) static void sas_phye_spinup_hold(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; struct sas_ha_struct *sas_ha = phy->ha; struct sas_internal *i = @@ -127,14 +123,12 @@ int sas_register_phys(struct sas_ha_struct *sas_ha) phy->error = 0; INIT_LIST_HEAD(&phy->port_phy_el); for (k = 0; k < PORT_NUM_EVENTS; k++) { - INIT_WORK(&phy->port_events[k].work, - sas_port_event_fns[k]); + INIT_SAS_WORK(&phy->port_events[k].work, sas_port_event_fns[k]); phy->port_events[k].phy = phy; } for (k = 0; k < PHY_NUM_EVENTS; k++) { - INIT_WORK(&phy->phy_events[k].work, - sas_phy_event_fns[k]); + INIT_SAS_WORK(&phy->phy_events[k].work, sas_phy_event_fns[k]); phy->phy_events[k].phy = phy; } @@ -144,8 +138,7 @@ int sas_register_phys(struct sas_ha_struct *sas_ha) spin_lock_init(&phy->sas_prim_lock); phy->frame_rcvd_size = 0; - phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev, - i); + phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev, i); if (!phy->phy) return -ENOMEM; diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index eb19c016d500..1cf7d75ad5eb 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -208,8 +208,7 @@ void sas_deform_port(struct asd_sas_phy *phy, int gone) void sas_porte_bytes_dmaed(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_BYTES_DMAED, &phy->port_events_pending); @@ -219,8 +218,7 @@ void sas_porte_bytes_dmaed(struct work_struct *work) void sas_porte_broadcast_rcvd(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; unsigned long flags; u32 prim; @@ -237,8 +235,7 @@ void sas_porte_broadcast_rcvd(struct work_struct *work) void sas_porte_link_reset_err(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_LINK_RESET_ERR, &phy->port_events_pending); @@ -248,8 +245,7 @@ void sas_porte_link_reset_err(struct work_struct *work) void sas_porte_timer_event(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_TIMER_EVENT, &phy->port_events_pending); @@ -259,8 +255,7 @@ void sas_porte_timer_event(struct work_struct *work) void sas_porte_hard_reset(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_HARD_RESET, &phy->port_events_pending); -- cgit v1.2.3 From 1699490db339e2c6b3037ea8e7dcd6b2755b688e Mon Sep 17 00:00:00 2001 From: Thomas Jackson Date: Fri, 17 Feb 2012 18:33:10 -0800 Subject: [SCSI] libsas: fix sas_find_bcast_phy() in the presence of 'vacant' phys If an expander reports 'PHY VACANT' for a phy index prior to the one that generated a BCN libsas fails rediscovery. Since a vacant phy is defined as a valid phy index that will never have an attached device just continue the search. Cc: Signed-off-by: Thomas Jackson Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 05acd9e35fc4..833bea067a77 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1718,9 +1718,17 @@ static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, int phy_change_count = 0; res = sas_get_phy_change_count(dev, i, &phy_change_count); - if (res) - goto out; - else if (phy_change_count != ex->ex_phy[i].phy_change_count) { + switch (res) { + case SMP_RESP_PHY_VACANT: + case SMP_RESP_NO_PHY: + continue; + case SMP_RESP_FUNC_ACC: + break; + default: + return res; + } + + if (phy_change_count != ex->ex_phy[i].phy_change_count) { if (update) ex->ex_phy[i].phy_change_count = phy_change_count; @@ -1728,8 +1736,7 @@ static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, return 0; } } -out: - return res; + return 0; } static int sas_get_ex_change_count(struct domain_device *dev, int *ecc) -- cgit v1.2.3 From ec236e526777ea8825e6e0c3673a40389692eabf Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 12 Mar 2012 11:38:26 -0700 Subject: [SCSI] libsas: fix sas_get_port_device regression Commit 899fcf4 "[SCSI] libsas: set attached device type and target protocols for local phys" setup 'phy' to be dereferenced after list_for_each_entry(phy, &port->phy_list, port_phy_el) (i.e. phy == &port->phy_list) resulting in reports like: BUG: unable to handle kernel NULL pointer dereference at 00000000000002b0 IP: [] sas_discover_domain+0x29e/0x4fb [libsas] ...fix by deferring sas_phy_set_target() to the end of sas_get_port_device(). Reported-by: Tom Jackson Tested-by: Tom Jackson Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index c7ac88288bf1..658f16cc2f03 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -134,10 +134,6 @@ static int sas_get_port_device(struct asd_sas_port *port) return -ENODEV; } - spin_lock_irq(&port->phy_list_lock); - list_for_each_entry(phy, &port->phy_list, port_phy_el) - sas_phy_set_target(phy, dev); - spin_unlock_irq(&port->phy_list_lock); rphy->identify.phy_identifier = phy->phy->identify.phy_identifier; memcpy(dev->sas_addr, port->attached_sas_addr, SAS_ADDR_SIZE); sas_fill_in_rphy(dev, rphy); @@ -164,6 +160,11 @@ static int sas_get_port_device(struct asd_sas_port *port) spin_unlock_irq(&port->dev_list_lock); } + spin_lock_irq(&port->phy_list_lock); + list_for_each_entry(phy, &port->phy_list, port_phy_el) + sas_phy_set_target(phy, dev); + spin_unlock_irq(&port->phy_list_lock); + return 0; } -- cgit v1.2.3 From 9487669fc225092cf315e1291ece28e23e6754f3 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 Mar 2012 10:53:24 -0700 Subject: [SCSI] libsas: unify domain_device sas_rphy lifetimes Since the domain_device can out live the scsi_target we need the rphy to follow suit otherwise we run into issues like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: [] sas_ata_printk+0x43/0x6f [libsas] PGD 0 Oops: 0000 [#1] SMP CPU 1 Modules linked in: ses enclosure isci libsas scsi_transport_sas fuse sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf microcode pcspkr igb joydev iTCO_wdt ioatdma iTCO_vendor_support i2c_i801 i2c_core dca wmi hed ipv6 pata_acpi ata_generic [last unloaded: scsi_wait_scan] Pid: 129, comm: kworker/u:3 Not tainted 3.3.0-rc5-isci+ #1 Intel Corporation SandyBridge Platform/To be filled by O.E.M. RIP: 0010:[] [] sas_ata_printk+0x43/0x6f [libsas] RSP: 0018:ffff88042232dd70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8804283165b8 RCX: ffff88042232dda0 RDX: ffff88042232dd78 RSI: ffff8804283165b8 RDI: ffffffffa01188d7 RBP: ffff88042232ddd0 R08: ffff880388454000 R09: ffff8803edfde1f8 R10: ffff8803edfde1f8 R11: ffff8803edfde1f8 R12: ffff880428316750 R13: ffff880388454000 R14: ffff8803f88b31d0 R15: ffff8803f8b21d50 FS: 0000000000000000(0000) GS:ffff88042ee20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000050 CR3: 0000000001a05000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/u:3 (pid: 129, threadinfo ffff88042232c000, task ffff88042230c920) Stack: 0000000000000000 ffff880400000018 ffff88042232dde0 ffff88042232dda0 ffffffffa01188c4 ffff88042ee93af0 ffff88042232ddb0 ffffffff8100e047 ffff88042232de10 ffff880420e5a2c8 ffff8803f8b21d50 ffff8803edfde1f8 Call Trace: [] ? load_TLS+0xb/0xf [] async_sas_ata_eh+0x66/0x95 [libsas] [] async_run_entry_fn+0x9e/0x131 Reported-by: Tom Jackson Tested-by: Tom Jackson Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 11 ++++++----- drivers/scsi/libsas/sas_expander.c | 6 ++++-- 2 files changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 658f16cc2f03..13b5891f9961 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -151,6 +151,7 @@ static int sas_get_port_device(struct asd_sas_port *port) sas_device_set_phy(dev, port->port); dev->rphy = rphy; + get_device(&dev->rphy->dev); if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEV) list_add_tail(&dev->disco_list_node, &port->disco_list); @@ -255,6 +256,9 @@ void sas_free_device(struct kref *kref) { struct domain_device *dev = container_of(kref, typeof(*dev), kref); + put_device(&dev->rphy->dev); + dev->rphy = NULL; + if (dev->parent) sas_put_device(dev->parent); @@ -301,7 +305,6 @@ static void sas_destruct_devices(struct work_struct *work) sas_remove_children(&dev->rphy->dev); sas_rphy_delete(dev->rphy); - dev->rphy = NULL; sas_unregister_common_dev(port, dev); } } @@ -313,11 +316,11 @@ void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev) /* this rphy never saw sas_rphy_add */ list_del_init(&dev->disco_list_node); sas_rphy_free(dev->rphy); - dev->rphy = NULL; sas_unregister_common_dev(port, dev); + return; } - if (dev->rphy && !test_and_set_bit(SAS_DEV_DESTROY, &dev->state)) { + if (!test_and_set_bit(SAS_DEV_DESTROY, &dev->state)) { sas_rphy_unlink(dev->rphy); list_move_tail(&dev->disco_list_node, &port->destroy_list); sas_discover_event(dev->port, DISCE_DESTRUCT); @@ -417,8 +420,6 @@ static void sas_discover_domain(struct work_struct *work) if (error) { sas_rphy_free(dev->rphy); - dev->rphy = NULL; - list_del_init(&dev->disco_list_node); spin_lock_irq(&port->dev_list_lock); list_del_init(&dev->dev_list_node); diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 833bea067a77..37c3c3f5f35d 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -783,6 +783,7 @@ static struct domain_device *sas_ex_discover_end_dev( sas_init_dev(child); child->rphy = rphy; + get_device(&rphy->dev); list_add_tail(&child->disco_list_node, &parent->port->disco_list); @@ -806,6 +807,7 @@ static struct domain_device *sas_ex_discover_end_dev( sas_init_dev(child); child->rphy = rphy; + get_device(&rphy->dev); sas_fill_in_rphy(child, rphy); list_add_tail(&child->disco_list_node, &parent->port->disco_list); @@ -830,8 +832,6 @@ static struct domain_device *sas_ex_discover_end_dev( out_list_del: sas_rphy_free(child->rphy); - child->rphy = NULL; - list_del(&child->disco_list_node); spin_lock_irq(&parent->port->dev_list_lock); list_del(&child->dev_list_node); @@ -911,6 +911,7 @@ static struct domain_device *sas_ex_discover_expander( } port = parent->port; child->rphy = rphy; + get_device(&rphy->dev); edev = rphy_to_expander_device(rphy); child->dev_type = phy->attached_dev_type; kref_get(&parent->kref); @@ -934,6 +935,7 @@ static struct domain_device *sas_ex_discover_expander( res = sas_discover_expander(child); if (res) { + sas_rphy_delete(rphy); spin_lock_irq(&parent->port->dev_list_lock); list_del(&child->dev_list_node); spin_unlock_irq(&parent->port->dev_list_lock); -- cgit v1.2.3 From 0f3fce5cc77e1f35758ef0e46a989e76e5046a7b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 Mar 2012 13:24:29 -0700 Subject: [SCSI] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready The check_ready implementation in the expander-attached ata device case polls on sas_ex_phy_discover(). The effect is that the ex_phy fields (critically ->attached_sas_addr) can change. When ata_eh ends and libsas comes along to revalidate the domain sas_unregister_devs_sas_addr() can fail to lookup devices to remove, or fail to re-add an ata device that ata_eh marked as disabled. So change the code to skip the sas_address and change count updates when ata_eh is active. Cc: Jack Wang Tested-by: Maciej Patelczyk Tested-by: Bartek Nowakowski Tested-by: Jacek Danecki Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 37c3c3f5f35d..c1f91b1c27c3 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -202,6 +202,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) u8 sas_addr[SAS_ADDR_SIZE]; struct smp_resp *resp = rsp; struct discover_resp *dr = &resp->disc; + struct sas_ha_struct *ha = dev->port->ha; struct expander_device *ex = &dev->ex_dev; struct ex_phy *phy = &ex->ex_phy[phy_id]; struct sas_rphy *rphy = dev->rphy; @@ -209,6 +210,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) char *type; if (new_phy) { + if (WARN_ON_ONCE(test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state))) + return; phy->phy = sas_phy_alloc(&rphy->dev, phy_id); /* FIXME: error_handling */ @@ -233,6 +236,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) memcpy(sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); phy->attached_dev_type = to_dev_type(dr); + if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) + goto out; phy->phy_id = phy_id; phy->linkrate = dr->linkrate; phy->attached_sata_host = dr->attached_sata_host; @@ -266,6 +271,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) return; } + out: switch (phy->attached_dev_type) { case SATA_PENDING: type = "stp pending"; @@ -304,7 +310,15 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) else return; - SAS_DPRINTK("ex %016llx phy%02d:%c:%X attached: %016llx (%s)\n", + /* if the attached device type changed and ata_eh is active, + * make sure we run revalidation when eh completes (see: + * sas_enable_revalidation) + */ + if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) + set_bit(DISCE_REVALIDATE_DOMAIN, &dev->port->disc.pending); + + SAS_DPRINTK("%sex %016llx phy%02d:%c:%X attached: %016llx (%s)\n", + test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state) ? "ata: " : "", SAS_ADDR(dev->sas_addr), phy->phy_id, sas_route_char(dev, phy), phy->linkrate, SAS_ADDR(phy->attached_sas_addr), type); -- cgit v1.2.3 From b2024459252a9d2d312ee562f86f332a1498f412 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 21 Mar 2012 21:09:07 -0700 Subject: [SCSI] libsas, libata: fix start of life for a sas ata_port This changes the ordering of initialization and probing events from: 1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate ata_port and schedule port probe in DISCE_PROBE ...to: 1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 3/ schedule port probe in DISCE_PROBE This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to destrory ata devices before they have been fully initialized: BUG: unable to handle kernel paging request at 0000000000003b10 IP: [] sas_ata_end_eh+0x12/0x5e [libsas] ... [] sas_unregister_common_dev+0x78/0xc9 [libsas] [] sas_unregister_dev+0x4f/0xad [libsas] [] sas_unregister_domain_devices+0x7f/0xbf [libsas] [] sas_deform_port+0x61/0x1b8 [libsas] [] sas_phye_loss_of_signal+0x29/0x2b [libsas] ...and kills the awkward "sata domain_device briefly existing in the domain without an ata_port" state. Reported-by: Michal Kosciowski Signed-off-by: Dan Williams Acked-by: Jeff Garzik Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 35 ++++++++++++++++++++--------------- drivers/scsi/ipr.c | 6 +++++- drivers/scsi/libsas/sas_ata.c | 33 ++++++++++----------------------- drivers/scsi/libsas/sas_discover.c | 13 ++++++++++--- drivers/scsi/libsas/sas_expander.c | 8 +++++--- 5 files changed, 50 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 7832b1ad2327..22226350cd0c 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3839,18 +3839,25 @@ void ata_sas_port_stop(struct ata_port *ap) } EXPORT_SYMBOL_GPL(ata_sas_port_stop); -int ata_sas_async_port_init(struct ata_port *ap) +/** + * ata_sas_async_probe - simply schedule probing and return + * @ap: Port to probe + * + * For batch scheduling of probe for sas attached ata devices, assumes + * the port has already been through ata_sas_port_init() + */ +void ata_sas_async_probe(struct ata_port *ap) { - int rc = ap->ops->port_start(ap); - - if (!rc) { - ap->print_id = atomic_inc_return(&ata_print_id); - __ata_port_probe(ap); - } + __ata_port_probe(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_async_probe); - return rc; +int ata_sas_sync_probe(struct ata_port *ap) +{ + return ata_port_probe(ap); } -EXPORT_SYMBOL_GPL(ata_sas_async_port_init); +EXPORT_SYMBOL_GPL(ata_sas_sync_probe); + /** * ata_sas_port_init - Initialize a SATA device @@ -3867,12 +3874,10 @@ int ata_sas_port_init(struct ata_port *ap) { int rc = ap->ops->port_start(ap); - if (!rc) { - ap->print_id = atomic_inc_return(&ata_print_id); - rc = ata_port_probe(ap); - } - - return rc; + if (rc) + return rc; + ap->print_id = atomic_inc_return(&ata_print_id); + return 0; } EXPORT_SYMBOL_GPL(ata_sas_port_init); diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index e002cd466e9a..467dc38246f9 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -4549,8 +4549,12 @@ static int ipr_ata_slave_alloc(struct scsi_device *sdev) ENTER; if (sdev->sdev_target) sata_port = sdev->sdev_target->hostdata; - if (sata_port) + if (sata_port) { rc = ata_sas_port_init(sata_port->ap); + if (rc == 0) + rc = ata_sas_sync_probe(sata_port->ap); + } + if (rc) ipr_slave_destroy(sdev); diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index bc0cecc6ad62..441d88ad99a7 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -546,11 +546,12 @@ static struct ata_port_info sata_port_info = { .port_ops = &sas_sata_ops }; -int sas_ata_init_host_and_port(struct domain_device *found_dev) +int sas_ata_init(struct domain_device *found_dev) { struct sas_ha_struct *ha = found_dev->port->ha; struct Scsi_Host *shost = ha->core.shost; struct ata_port *ap; + int rc; ata_host_init(&found_dev->sata_dev.ata_host, ha->dev, @@ -567,8 +568,11 @@ int sas_ata_init_host_and_port(struct domain_device *found_dev) ap->private_data = found_dev; ap->cbl = ATA_CBL_SATA; ap->scsi_host = shost; - /* publish initialized ata port */ - smp_wmb(); + rc = ata_sas_port_init(ap); + if (rc) { + ata_sas_port_destroy(ap); + return rc; + } found_dev->sata_dev.ap = ap; return 0; @@ -648,18 +652,13 @@ static void sas_get_ata_command_set(struct domain_device *dev) void sas_probe_sata(struct asd_sas_port *port) { struct domain_device *dev, *n; - int err; mutex_lock(&port->ha->disco_mutex); - list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { + list_for_each_entry(dev, &port->disco_list, disco_list_node) { if (!dev_is_sata(dev)) continue; - err = sas_ata_init_host_and_port(dev); - if (err) - sas_fail_probe(dev, __func__, err); - else - ata_sas_async_port_init(dev->sata_dev.ap); + ata_sas_async_probe(dev->sata_dev.ap); } mutex_unlock(&port->ha->disco_mutex); @@ -718,18 +717,6 @@ static void async_sas_ata_eh(void *data, async_cookie_t cookie) sas_put_device(dev); } -static bool sas_ata_dev_eh_valid(struct domain_device *dev) -{ - struct ata_port *ap; - - if (!dev_is_sata(dev)) - return false; - ap = dev->sata_dev.ap; - /* consume fully initialized ata ports */ - smp_rmb(); - return !!ap; -} - void sas_ata_strategy_handler(struct Scsi_Host *shost) { struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); @@ -753,7 +740,7 @@ void sas_ata_strategy_handler(struct Scsi_Host *shost) spin_lock(&port->dev_list_lock); list_for_each_entry(dev, &port->dev_list, dev_list_node) { - if (!sas_ata_dev_eh_valid(dev)) + if (!dev_is_sata(dev)) continue; async_schedule_domain(async_sas_ata_eh, dev, &async); } diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 13b5891f9961..629a0865b130 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -72,6 +72,7 @@ static int sas_get_port_device(struct asd_sas_port *port) struct asd_sas_phy *phy; struct sas_rphy *rphy; struct domain_device *dev; + int rc = -ENODEV; dev = sas_alloc_device(); if (!dev) @@ -110,9 +111,16 @@ static int sas_get_port_device(struct asd_sas_port *port) sas_init_dev(dev); + dev->port = port; switch (dev->dev_type) { - case SAS_END_DEV: case SATA_DEV: + rc = sas_ata_init(dev); + if (rc) { + rphy = NULL; + break; + } + /* fall through */ + case SAS_END_DEV: rphy = sas_end_device_alloc(port->port); break; case EDGE_DEV: @@ -131,7 +139,7 @@ static int sas_get_port_device(struct asd_sas_port *port) if (!rphy) { sas_put_device(dev); - return -ENODEV; + return rc; } rphy->identify.phy_identifier = phy->phy->identify.phy_identifier; @@ -139,7 +147,6 @@ static int sas_get_port_device(struct asd_sas_port *port) sas_fill_in_rphy(dev, rphy); sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr); port->port_dev = dev; - dev->port = port; dev->linkrate = port->linkrate; dev->min_linkrate = port->linkrate; dev->max_linkrate = port->linkrate; diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index c1f91b1c27c3..75247a176c6b 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -790,12 +790,14 @@ static struct domain_device *sas_ex_discover_end_dev( if (res) goto out_free; + sas_init_dev(child); + res = sas_ata_init(child); + if (res) + goto out_free; rphy = sas_end_device_alloc(phy->port); - if (unlikely(!rphy)) + if (!rphy) goto out_free; - sas_init_dev(child); - child->rphy = rphy; get_device(&rphy->dev); -- cgit v1.2.3 From 7d1d865181185bdf1316d236b1b4bd02c9020729 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 Mar 2012 10:50:27 -0700 Subject: [SCSI] libsas: fix false positive 'device attached' conditions Normalize phy->attached_sas_addr to return a zero-address in the case when device-type == NO_DEVICE or the linkrate is invalid to handle expanders that put non-zero sas addresses in the discovery response: sas: ex 5001b4da000f903f phy02:U:0 attached: 0100000000000000 (no device) sas: ex 5001b4da000f903f phy01:U:0 attached: 0100000000000000 (no device) sas: ex 5001b4da000f903f phy03:U:0 attached: 0100000000000000 (no device) sas: ex 5001b4da000f903f phy00:U:0 attached: 0100000000000000 (no device) Reported-by: Andrzej Jakowski Signed-off-by: Dan Williams Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 75247a176c6b..caa0525d2523 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -245,7 +245,14 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) phy->attached_sata_ps = dr->attached_sata_ps; phy->attached_iproto = dr->iproto << 1; phy->attached_tproto = dr->tproto << 1; - memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); + /* help some expanders that fail to zero sas_address in the 'no + * device' case + */ + if (phy->attached_dev_type == NO_DEVICE || + phy->linkrate < SAS_LINK_RATE_1_5_GBPS) + memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); + else + memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); phy->attached_phy_id = dr->attached_phy_id; phy->phy_change_count = dr->change_count; phy->routing_attr = dr->routing_attr; -- cgit v1.2.3 From b4698d88585e23d815506f7f38c48192d944b2eb Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Apr 2012 23:48:12 -0700 Subject: [SCSI] Revert "[SCSI] libsas: fix sas port naming" This reverts commit a692b0eec5efae382dfa800e8b4b083f172921a7. Tom reports: [ 8.741033] ------------[ cut here ]------------ [ 8.741038] WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0xc1/0xf0() [ 8.741040] Hardware name: To Be Filled By O.E.M. [ 8.741041] sysfs: cannot create duplicate filename ...and missing 2 out of 4 drives connected to mvsas. Commit a692b0ee made the assumption that all the phy ids an lldd registers to libsas are unique. However, in the "multi-chip" case mvsas does a rather annoying duplication of phy ids in the array passed to libsas. So, for example, chip0 has phy0-3 at ha phy index 0-3 and chip1 has its phy0-3 at ha phy index 4-7. The more natural model would be to create a scsi_host (and sas_ha) per chip (controller), but for now revert the naming fix which unfortunately means dealing with unpredictable end-device names for a bit longer. Cc: Xiangliang Yu Cc: Patrick Thomson Reported-by: Tom Rini Tested-by: Tom Rini Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index 1cf7d75ad5eb..e884a8c58a0c 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -123,7 +123,7 @@ static void sas_form_port(struct asd_sas_phy *phy) spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags); if (!port->port) { - port->port = sas_port_alloc(phy->phy->dev.parent, phy->id); + port->port = sas_port_alloc(phy->phy->dev.parent, port->id); BUG_ON(!port->port); sas_port_add(port->port); } -- cgit v1.2.3 From 5a218ceba7b64f506bf4f004b04bb457c1805a62 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Wed, 4 Apr 2012 14:11:45 +0300 Subject: HSI: hsi: Rework hsi_controller release Use the proper release mechanism for hsi_controller and hsi_ports structures. Free the structures through their associated device release callbacks. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 108 +++++++++++++++++++++++++++++++++--------------------- 1 file changed, 66 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index 4e2d79b79334..c17d12ca8e7f 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -140,12 +140,17 @@ static int hsi_remove_port(struct device *dev, void *data __maybe_unused) return 0; } -static void hsi_controller_release(struct device *dev __maybe_unused) +static void hsi_controller_release(struct device *dev) { + struct hsi_controller *hsi = to_hsi_controller(dev); + + kfree(hsi->port); + kfree(hsi); } -static void hsi_port_release(struct device *dev __maybe_unused) +static void hsi_port_release(struct device *dev) { + kfree(to_hsi_port(dev)); } /** @@ -172,18 +177,14 @@ int hsi_register_controller(struct hsi_controller *hsi) hsi->device.type = &hsi_ctrl; hsi->device.bus = &hsi_bus_type; - hsi->device.release = hsi_controller_release; - err = device_register(&hsi->device); + err = device_add(&hsi->device); if (err < 0) return err; for (i = 0; i < hsi->num_ports; i++) { - hsi->port[i].device.parent = &hsi->device; - hsi->port[i].device.bus = &hsi_bus_type; - hsi->port[i].device.release = hsi_port_release; - hsi->port[i].device.type = &hsi_port; - INIT_LIST_HEAD(&hsi->port[i].clients); - spin_lock_init(&hsi->port[i].clock); - err = device_register(&hsi->port[i].device); + hsi->port[i]->device.parent = &hsi->device; + hsi->port[i]->device.bus = &hsi_bus_type; + hsi->port[i]->device.type = &hsi_port; + err = device_add(&hsi->port[i]->device); if (err < 0) goto out; } @@ -192,7 +193,9 @@ int hsi_register_controller(struct hsi_controller *hsi) return 0; out: - hsi_unregister_controller(hsi); + while (i-- > 0) + device_del(&hsi->port[i]->device); + device_del(&hsi->device); return err; } @@ -222,6 +225,29 @@ static inline int hsi_dummy_cl(struct hsi_client *cl __maybe_unused) return 0; } +/** + * hsi_put_controller - Free an HSI controller + * + * @hsi: Pointer to the HSI controller to freed + * + * HSI controller drivers should only use this function if they need + * to free their allocated hsi_controller structures before a successful + * call to hsi_register_controller. Other use is not allowed. + */ +void hsi_put_controller(struct hsi_controller *hsi) +{ + unsigned int i; + + if (!hsi) + return; + + for (i = 0; i < hsi->num_ports; i++) + if (hsi->port && hsi->port[i]) + put_device(&hsi->port[i]->device); + put_device(&hsi->device); +} +EXPORT_SYMBOL_GPL(hsi_put_controller); + /** * hsi_alloc_controller - Allocate an HSI controller and its ports * @n_ports: Number of ports on the HSI controller @@ -232,54 +258,52 @@ static inline int hsi_dummy_cl(struct hsi_client *cl __maybe_unused) struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags) { struct hsi_controller *hsi; - struct hsi_port *port; + struct hsi_port **port; unsigned int i; if (!n_ports) return NULL; - port = kzalloc(sizeof(*port)*n_ports, flags); - if (!port) - return NULL; hsi = kzalloc(sizeof(*hsi), flags); if (!hsi) - goto out; - for (i = 0; i < n_ports; i++) { - dev_set_name(&port[i].device, "port%d", i); - port[i].num = i; - port[i].async = hsi_dummy_msg; - port[i].setup = hsi_dummy_cl; - port[i].flush = hsi_dummy_cl; - port[i].start_tx = hsi_dummy_cl; - port[i].stop_tx = hsi_dummy_cl; - port[i].release = hsi_dummy_cl; - mutex_init(&port[i].lock); + return NULL; + port = kzalloc(sizeof(*port)*n_ports, flags); + if (!port) { + kfree(hsi); + return NULL; } hsi->num_ports = n_ports; hsi->port = port; + hsi->device.release = hsi_controller_release; + device_initialize(&hsi->device); + + for (i = 0; i < n_ports; i++) { + port[i] = kzalloc(sizeof(**port), flags); + if (port[i] == NULL) + goto out; + port[i]->num = i; + port[i]->async = hsi_dummy_msg; + port[i]->setup = hsi_dummy_cl; + port[i]->flush = hsi_dummy_cl; + port[i]->start_tx = hsi_dummy_cl; + port[i]->stop_tx = hsi_dummy_cl; + port[i]->release = hsi_dummy_cl; + mutex_init(&port[i]->lock); + INIT_LIST_HEAD(&hsi->port[i]->clients); + spin_lock_init(&hsi->port[i]->clock); + dev_set_name(&port[i]->device, "port%d", i); + hsi->port[i]->device.release = hsi_port_release; + device_initialize(&hsi->port[i]->device); + } return hsi; out: - kfree(port); + hsi_put_controller(hsi); return NULL; } EXPORT_SYMBOL_GPL(hsi_alloc_controller); -/** - * hsi_free_controller - Free an HSI controller - * @hsi: Pointer to HSI controller - */ -void hsi_free_controller(struct hsi_controller *hsi) -{ - if (!hsi) - return; - - kfree(hsi->port); - kfree(hsi); -} -EXPORT_SYMBOL_GPL(hsi_free_controller); - /** * hsi_free_msg - Free an HSI message * @msg: Pointer to the HSI message -- cgit v1.2.3 From 90e41f9dc75b47ab94e2191e4c86aa8259699a33 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Wed, 11 Apr 2012 11:01:11 +0300 Subject: HSI: hsi: Fix error path cleanup on client registration HSI client structure should be freed on error path after calling device_registration by dropping a reference to it. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index c17d12ca8e7f..5c76a36419d4 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -100,7 +100,7 @@ static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) cl->device.archdata = *info->archdata; if (device_register(&cl->device) < 0) { pr_err("hsi: failed to register client: %s\n", info->name); - kfree(cl); + put_device(&cl->device); } } -- cgit v1.2.3 From 6f02b9e9b44a3bfc0046da3ff2707dae0b5e2f30 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Tue, 10 Apr 2012 15:11:24 +0300 Subject: HSI: hsi: Remove controllers and ports from the bus HSI controllers and ports do not belong to the HSI bus. Those devices are not supposed to have a driver attached to them. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index 5c76a36419d4..cec1f0c04557 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -29,18 +29,6 @@ #include #include "hsi_core.h" -static struct device_type hsi_ctrl = { - .name = "hsi_controller", -}; - -static struct device_type hsi_cl = { - .name = "hsi_client", -}; - -static struct device_type hsi_port = { - .name = "hsi_port", -}; - static ssize_t modalias_show(struct device *dev, struct device_attribute *a __maybe_unused, char *buf) { @@ -54,8 +42,7 @@ static struct device_attribute hsi_bus_dev_attrs[] = { static int hsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env) { - if (dev->type == &hsi_cl) - add_uevent_var(env, "MODALIAS=hsi:%s", dev_name(dev)); + add_uevent_var(env, "MODALIAS=hsi:%s", dev_name(dev)); return 0; } @@ -85,7 +72,6 @@ static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) cl = kzalloc(sizeof(*cl), GFP_KERNEL); if (!cl) return; - cl->device.type = &hsi_cl; cl->tx_cfg = info->tx_cfg; cl->rx_cfg = info->rx_cfg; cl->device.bus = &hsi_bus_type; @@ -175,15 +161,11 @@ int hsi_register_controller(struct hsi_controller *hsi) unsigned int i; int err; - hsi->device.type = &hsi_ctrl; - hsi->device.bus = &hsi_bus_type; err = device_add(&hsi->device); if (err < 0) return err; for (i = 0; i < hsi->num_ports; i++) { hsi->port[i]->device.parent = &hsi->device; - hsi->port[i]->device.bus = &hsi_bus_type; - hsi->port[i]->device.type = &hsi_port; err = device_add(&hsi->port[i]->device); if (err < 0) goto out; -- cgit v1.2.3 From ec1c56ff813a198d656d4aa42e5de03e45751bf8 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Wed, 11 Apr 2012 10:55:53 +0300 Subject: HSI: hsi: Rework hsi_event interface Remove custom hack and make use of the notifier chain interfaces for delivering events from the ports to their associated clients. Clients that want to receive port events need to register their callbacks using hsi_register_port_event(). The callbacks can be called in interrupt context. Use hsi_unregestier_port_event() to undo the registration. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 101 +++++++++++++++++++++++++++++------------------------- 1 file changed, 54 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index cec1f0c04557..2d58f939d27f 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -21,12 +21,11 @@ */ #include #include -#include #include -#include #include #include #include +#include #include "hsi_core.h" static ssize_t modalias_show(struct device *dev, @@ -67,7 +66,6 @@ static void hsi_client_release(struct device *dev) static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) { struct hsi_client *cl; - unsigned long flags; cl = kzalloc(sizeof(*cl), GFP_KERNEL); if (!cl) @@ -79,9 +77,6 @@ static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) cl->device.release = hsi_client_release; dev_set_name(&cl->device, info->name); cl->device.platform_data = info->platform_data; - spin_lock_irqsave(&port->clock, flags); - list_add_tail(&cl->link, &port->clients); - spin_unlock_irqrestore(&port->clock, flags); if (info->archdata) cl->device.archdata = *info->archdata; if (device_register(&cl->device) < 0) { @@ -106,13 +101,6 @@ static void hsi_scan_board_info(struct hsi_controller *hsi) static int hsi_remove_client(struct device *dev, void *data __maybe_unused) { - struct hsi_client *cl = to_hsi_client(dev); - struct hsi_port *port = to_hsi_port(dev->parent); - unsigned long flags; - - spin_lock_irqsave(&port->clock, flags); - list_del(&cl->link); - spin_unlock_irqrestore(&port->clock, flags); device_unregister(dev); return 0; @@ -271,8 +259,7 @@ struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags) port[i]->stop_tx = hsi_dummy_cl; port[i]->release = hsi_dummy_cl; mutex_init(&port[i]->lock); - INIT_LIST_HEAD(&hsi->port[i]->clients); - spin_lock_init(&hsi->port[i]->clock); + ATOMIC_INIT_NOTIFIER_HEAD(&port[i]->n_head); dev_set_name(&port[i]->device, "port%d", i); hsi->port[i]->device.release = hsi_port_release; device_initialize(&hsi->port[i]->device); @@ -420,37 +407,67 @@ void hsi_release_port(struct hsi_client *cl) } EXPORT_SYMBOL_GPL(hsi_release_port); -static int hsi_start_rx(struct hsi_client *cl, void *data __maybe_unused) +static int hsi_event_notifier_call(struct notifier_block *nb, + unsigned long event, void *data __maybe_unused) { - if (cl->hsi_start_rx) - (*cl->hsi_start_rx)(cl); + struct hsi_client *cl = container_of(nb, struct hsi_client, nb); + + (*cl->ehandler)(cl, event); return 0; } -static int hsi_stop_rx(struct hsi_client *cl, void *data __maybe_unused) +/** + * hsi_register_port_event - Register a client to receive port events + * @cl: HSI client that wants to receive port events + * @cb: Event handler callback + * + * Clients should register a callback to be able to receive + * events from the ports. Registration should happen after + * claiming the port. + * The handler can be called in interrupt context. + * + * Returns -errno on error, or 0 on success. + */ +int hsi_register_port_event(struct hsi_client *cl, + void (*handler)(struct hsi_client *, unsigned long)) { - if (cl->hsi_stop_rx) - (*cl->hsi_stop_rx)(cl); + struct hsi_port *port = hsi_get_port(cl); - return 0; + if (!handler || cl->ehandler) + return -EINVAL; + if (!hsi_port_claimed(cl)) + return -EACCES; + cl->ehandler = handler; + cl->nb.notifier_call = hsi_event_notifier_call; + + return atomic_notifier_chain_register(&port->n_head, &cl->nb); } +EXPORT_SYMBOL_GPL(hsi_register_port_event); -static int hsi_port_for_each_client(struct hsi_port *port, void *data, - int (*fn)(struct hsi_client *cl, void *data)) +/** + * hsi_unregister_port_event - Stop receiving port events for a client + * @cl: HSI client that wants to stop receiving port events + * + * Clients should call this function before releasing their associated + * port. + * + * Returns -errno on error, or 0 on success. + */ +int hsi_unregister_port_event(struct hsi_client *cl) { - struct hsi_client *cl; + struct hsi_port *port = hsi_get_port(cl); + int err; - spin_lock(&port->clock); - list_for_each_entry(cl, &port->clients, link) { - spin_unlock(&port->clock); - (*fn)(cl, data); - spin_lock(&port->clock); - } - spin_unlock(&port->clock); + WARN_ON(!hsi_port_claimed(cl)); - return 0; + err = atomic_notifier_chain_unregister(&port->n_head, &cl->nb); + if (!err) + cl->ehandler = NULL; + + return err; } +EXPORT_SYMBOL_GPL(hsi_unregister_port_event); /** * hsi_event -Notifies clients about port events @@ -464,22 +481,12 @@ static int hsi_port_for_each_client(struct hsi_port *port, void *data, * Events: * HSI_EVENT_START_RX - Incoming wake line high * HSI_EVENT_STOP_RX - Incoming wake line down + * + * Returns -errno on error, or 0 on success. */ -void hsi_event(struct hsi_port *port, unsigned int event) +int hsi_event(struct hsi_port *port, unsigned long event) { - int (*fn)(struct hsi_client *cl, void *data); - - switch (event) { - case HSI_EVENT_START_RX: - fn = hsi_start_rx; - break; - case HSI_EVENT_STOP_RX: - fn = hsi_stop_rx; - break; - default: - return; - } - hsi_port_for_each_client(port, NULL, fn); + return atomic_notifier_call_chain(&port->n_head, event, NULL); } EXPORT_SYMBOL_GPL(hsi_event); -- cgit v1.2.3 From fdadb6e9a5cf65c7662b2ca817856f187d05ab7d Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Fri, 13 Apr 2012 16:03:03 +0300 Subject: HSI: hsi_char: Remove max_data_size from sysfs Remove max_data_size sysfs entry. Otherwise is possible to have a buffer overrun if its value is increased after the device is open. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/clients/hsi_char.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c index 88a050df2389..3ad91f6447d8 100644 --- a/drivers/hsi/clients/hsi_char.c +++ b/drivers/hsi/clients/hsi_char.c @@ -123,7 +123,7 @@ struct hsc_client_data { static unsigned int hsc_major; /* Maximum buffer size that hsi_char will accept from userspace */ static unsigned int max_data_size = 0x1000; -module_param(max_data_size, uint, S_IRUSR | S_IWUSR); +module_param(max_data_size, uint, 0); MODULE_PARM_DESC(max_data_size, "max read/write data size [4,8..65536] (^2)"); static void hsc_add_tail(struct hsc_channel *channel, struct hsi_msg *msg, -- cgit v1.2.3 From 887ea3db26ec8a43b650ada273e1159492939c10 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Mon, 23 Apr 2012 19:36:39 +0900 Subject: drm/exynos: fixed duplicatd memory allocation bug. the gem was already allocated at gem allocation time but is allocated at page fault handler so this patch fixes the problem that gem was allocated one more time. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_gem.c | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index 26d51979116b..b1850c30e043 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -712,7 +712,6 @@ int exynos_drm_gem_dumb_destroy(struct drm_file *file_priv, int exynos_drm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { struct drm_gem_object *obj = vma->vm_private_data; - struct exynos_drm_gem_obj *exynos_gem_obj = to_exynos_gem_obj(obj); struct drm_device *dev = obj->dev; unsigned long f_vaddr; pgoff_t page_offset; @@ -724,21 +723,10 @@ int exynos_drm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_lock(&dev->struct_mutex); - /* - * allocate all pages as desired size if user wants to allocate - * physically non-continuous memory. - */ - if (exynos_gem_obj->flags & EXYNOS_BO_NONCONTIG) { - ret = exynos_drm_gem_get_pages(obj); - if (ret < 0) - goto err; - } - ret = exynos_drm_gem_map_pages(obj, vma, f_vaddr, page_offset); if (ret < 0) DRM_ERROR("failed to map pages.\n"); -err: mutex_unlock(&dev->struct_mutex); return convert_to_vm_err_msg(ret); -- cgit v1.2.3 From f6ead8dea518d0d02c576432eba4fa145e64b02a Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Mon, 23 Apr 2012 19:41:14 +0900 Subject: drm/exynos: fixed exynos_drm_gem_map_pages bug. this patch fixes the problem that the physical memory region to be mapped to user space could be exceeded. if page fault address was placed at between buffer start and end then memory region to be mapped would be exceeded. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_gem.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index b1850c30e043..f09d292a2e37 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -149,22 +149,12 @@ static int exynos_drm_gem_map_pages(struct drm_gem_object *obj, unsigned long pfn; if (exynos_gem_obj->flags & EXYNOS_BO_NONCONTIG) { - unsigned long usize = buf->size; - if (!buf->pages) return -EINTR; - while (usize > 0) { - pfn = page_to_pfn(buf->pages[page_offset++]); - vm_insert_mixed(vma, f_vaddr, pfn); - f_vaddr += PAGE_SIZE; - usize -= PAGE_SIZE; - } - - return 0; - } - - pfn = (buf->dma_addr >> PAGE_SHIFT) + page_offset; + pfn = page_to_pfn(buf->pages[page_offset++]); + } else + pfn = (buf->dma_addr >> PAGE_SHIFT) + page_offset; return vm_insert_mixed(vma, f_vaddr, pfn); } -- cgit v1.2.3 From 818c4ea7c589c521912430ea54e0c0a0671b2c6d Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Mon, 23 Apr 2012 19:47:18 +0900 Subject: drm/exynos: added missed vm area region mapping type. with this patch, if the memory region is physically non-continuous then VM_MIXEDMAP is set to vm->vm_flags otherwise VM_PFNMAP. we had missed this flag setting. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_gem.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index f09d292a2e37..01139c813953 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -514,6 +514,8 @@ static int exynos_drm_gem_mmap_buffer(struct file *filp, if (!buffer->pages) return -EINVAL; + vma->vm_flags |= VM_MIXEDMAP; + do { ret = vm_insert_page(vma, uaddr, buffer->pages[i++]); if (ret) { -- cgit v1.2.3 From 1bdae6f49c52af3a58998cdb051dbd5b942f9273 Mon Sep 17 00:00:00 2001 From: Narayanan G Date: Thu, 9 Feb 2012 12:41:37 +0530 Subject: dma40: Improve the logic of stopping logical chan can be directly stopped by issuing a SUSPEND_REQ on the EE bits. There is no need to suspend the physical channel and restart it. Also, the support for pre-V2 hw is discontinued. EE bits for writing: 00: disable only if AS=11 or AS=00 01: enable 10: suspend_req only if AS=01 & EE=01 or EE=11 11: round / no change for writing Signed-off-by: Narayanan G Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 320 ++++++++++++++++++++++++++++----------------- drivers/dma/ste_dma40_ll.h | 2 - 2 files changed, 199 insertions(+), 123 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index bdd41d4bfa8d..c5f26cc2c277 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -68,6 +68,22 @@ enum d40_command { D40_DMA_SUSPENDED = 3 }; +/* + * enum d40_events - The different Event Enables for the event lines. + * + * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan. + * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan. + * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line. + * @D40_ROUND_EVENTLINE: Status check for event line. + */ + +enum d40_events { + D40_DEACTIVATE_EVENTLINE = 0, + D40_ACTIVATE_EVENTLINE = 1, + D40_SUSPEND_REQ_EVENTLINE = 2, + D40_ROUND_EVENTLINE = 3 +}; + /* * These are the registers that has to be saved and later restored * when the DMA hw is powered off. @@ -870,8 +886,8 @@ static void d40_save_restore_registers(struct d40_base *base, bool save) } #endif -static int d40_channel_execute_command(struct d40_chan *d40c, - enum d40_command command) +static int __d40_execute_command_phy(struct d40_chan *d40c, + enum d40_command command) { u32 status; int i; @@ -880,6 +896,12 @@ static int d40_channel_execute_command(struct d40_chan *d40c, unsigned long flags; u32 wmask; + if (command == D40_DMA_STOP) { + ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ); + if (ret) + return ret; + } + spin_lock_irqsave(&d40c->base->execmd_lock, flags); if (d40c->phy_chan->num % 2 == 0) @@ -973,67 +995,109 @@ static void d40_term_all(struct d40_chan *d40c) } d40c->pending_tx = 0; - d40c->busy = false; } -static void __d40_config_set_event(struct d40_chan *d40c, bool enable, - u32 event, int reg) +static void __d40_config_set_event(struct d40_chan *d40c, + enum d40_events event_type, u32 event, + int reg) { void __iomem *addr = chan_base(d40c) + reg; int tries; + u32 status; + + switch (event_type) { + + case D40_DEACTIVATE_EVENTLINE: - if (!enable) { writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) | ~D40_EVENTLINE_MASK(event), addr); - return; - } + break; + + case D40_SUSPEND_REQ_EVENTLINE: + status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> + D40_EVENTLINE_POS(event); + + if (status == D40_DEACTIVATE_EVENTLINE || + status == D40_SUSPEND_REQ_EVENTLINE) + break; + writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event)) + | ~D40_EVENTLINE_MASK(event), addr); + + for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) { + + status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> + D40_EVENTLINE_POS(event); + + cpu_relax(); + /* + * Reduce the number of bus accesses while + * waiting for the DMA to suspend. + */ + udelay(3); + + if (status == D40_DEACTIVATE_EVENTLINE) + break; + } + + if (tries == D40_SUSPEND_MAX_IT) { + chan_err(d40c, + "unable to stop the event_line chl %d (log: %d)" + "status %x\n", d40c->phy_chan->num, + d40c->log_num, status); + } + break; + + case D40_ACTIVATE_EVENTLINE: /* * The hardware sometimes doesn't register the enable when src and dst * event lines are active on the same logical channel. Retry to ensure * it does. Usually only one retry is sufficient. */ - tries = 100; - while (--tries) { - writel((D40_ACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) - | ~D40_EVENTLINE_MASK(event), addr); + tries = 100; + while (--tries) { + writel((D40_ACTIVATE_EVENTLINE << + D40_EVENTLINE_POS(event)) | + ~D40_EVENTLINE_MASK(event), addr); - if (readl(addr) & D40_EVENTLINE_MASK(event)) - break; - } + if (readl(addr) & D40_EVENTLINE_MASK(event)) + break; + } - if (tries != 99) - dev_dbg(chan2dev(d40c), - "[%s] workaround enable S%cLNK (%d tries)\n", - __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D', - 100 - tries); + if (tries != 99) + dev_dbg(chan2dev(d40c), + "[%s] workaround enable S%cLNK (%d tries)\n", + __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D', + 100 - tries); - WARN_ON(!tries); -} + WARN_ON(!tries); + break; -static void d40_config_set_event(struct d40_chan *d40c, bool do_enable) -{ - unsigned long flags; + case D40_ROUND_EVENTLINE: + BUG(); + break; - spin_lock_irqsave(&d40c->phy_chan->lock, flags); + } +} +static void d40_config_set_event(struct d40_chan *d40c, + enum d40_events event_type) +{ /* Enable event line connected to device (or memcpy) */ if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) || (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) { u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type); - __d40_config_set_event(d40c, do_enable, event, + __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SSLNK); } if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM) { u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type); - __d40_config_set_event(d40c, do_enable, event, + __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SDLNK); } - - spin_unlock_irqrestore(&d40c->phy_chan->lock, flags); } static u32 d40_chan_has_events(struct d40_chan *d40c) @@ -1047,6 +1111,64 @@ static u32 d40_chan_has_events(struct d40_chan *d40c) return val; } +static int +__d40_execute_command_log(struct d40_chan *d40c, enum d40_command command) +{ + unsigned long flags; + int ret = 0; + u32 active_status; + void __iomem *active_reg; + + if (d40c->phy_chan->num % 2 == 0) + active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; + else + active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; + + + spin_lock_irqsave(&d40c->phy_chan->lock, flags); + + switch (command) { + case D40_DMA_STOP: + case D40_DMA_SUSPEND_REQ: + + active_status = (readl(active_reg) & + D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> + D40_CHAN_POS(d40c->phy_chan->num); + + if (active_status == D40_DMA_RUN) + d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE); + else + d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE); + + if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP)) + ret = __d40_execute_command_phy(d40c, command); + + break; + + case D40_DMA_RUN: + + d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE); + ret = __d40_execute_command_phy(d40c, command); + break; + + case D40_DMA_SUSPENDED: + BUG(); + break; + } + + spin_unlock_irqrestore(&d40c->phy_chan->lock, flags); + return ret; +} + +static int d40_channel_execute_command(struct d40_chan *d40c, + enum d40_command command) +{ + if (chan_is_logical(d40c)) + return __d40_execute_command_log(d40c, command); + else + return __d40_execute_command_phy(d40c, command); +} + static u32 d40_get_prmo(struct d40_chan *d40c) { static const unsigned int phy_map[] = { @@ -1149,15 +1271,7 @@ static int d40_pause(struct d40_chan *d40c) spin_lock_irqsave(&d40c->lock, flags); res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); - if (res == 0) { - if (chan_is_logical(d40c)) { - d40_config_set_event(d40c, false); - /* Resume the other logical channels if any */ - if (d40_chan_has_events(d40c)) - res = d40_channel_execute_command(d40c, - D40_DMA_RUN); - } - } + pm_runtime_mark_last_busy(d40c->base->dev); pm_runtime_put_autosuspend(d40c->base->dev); spin_unlock_irqrestore(&d40c->lock, flags); @@ -1174,45 +1288,17 @@ static int d40_resume(struct d40_chan *d40c) spin_lock_irqsave(&d40c->lock, flags); pm_runtime_get_sync(d40c->base->dev); - if (d40c->base->rev == 0) - if (chan_is_logical(d40c)) { - res = d40_channel_execute_command(d40c, - D40_DMA_SUSPEND_REQ); - goto no_suspend; - } /* If bytes left to transfer or linked tx resume job */ - if (d40_residue(d40c) || d40_tx_is_linked(d40c)) { - - if (chan_is_logical(d40c)) - d40_config_set_event(d40c, true); - + if (d40_residue(d40c) || d40_tx_is_linked(d40c)) res = d40_channel_execute_command(d40c, D40_DMA_RUN); - } -no_suspend: pm_runtime_mark_last_busy(d40c->base->dev); pm_runtime_put_autosuspend(d40c->base->dev); spin_unlock_irqrestore(&d40c->lock, flags); return res; } -static int d40_terminate_all(struct d40_chan *chan) -{ - unsigned long flags; - int ret = 0; - - ret = d40_pause(chan); - if (!ret && chan_is_physical(chan)) - ret = d40_channel_execute_command(chan, D40_DMA_STOP); - - spin_lock_irqsave(&chan->lock, flags); - d40_term_all(chan); - spin_unlock_irqrestore(&chan->lock, flags); - - return ret; -} - static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) { struct d40_chan *d40c = container_of(tx->chan, @@ -1232,20 +1318,6 @@ static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) static int d40_start(struct d40_chan *d40c) { - if (d40c->base->rev == 0) { - int err; - - if (chan_is_logical(d40c)) { - err = d40_channel_execute_command(d40c, - D40_DMA_SUSPEND_REQ); - if (err) - return err; - } - } - - if (chan_is_logical(d40c)) - d40_config_set_event(d40c, true); - return d40_channel_execute_command(d40c, D40_DMA_RUN); } @@ -1258,10 +1330,10 @@ static struct d40_desc *d40_queue_start(struct d40_chan *d40c) d40d = d40_first_queued(d40c); if (d40d != NULL) { - if (!d40c->busy) + if (!d40c->busy) { d40c->busy = true; - - pm_runtime_get_sync(d40c->base->dev); + pm_runtime_get_sync(d40c->base->dev); + } /* Remove from queue */ d40_desc_remove(d40d); @@ -1388,8 +1460,8 @@ static void dma_tasklet(unsigned long data) return; - err: - /* Rescue manoeuvre if receiving double interrupts */ +err: + /* Rescue manouver if receiving double interrupts */ if (d40c->pending_tx > 0) d40c->pending_tx--; spin_unlock_irqrestore(&d40c->lock, flags); @@ -1770,7 +1842,6 @@ static int d40_config_memcpy(struct d40_chan *d40c) return 0; } - static int d40_free_dma(struct d40_chan *d40c) { @@ -1806,43 +1877,18 @@ static int d40_free_dma(struct d40_chan *d40c) } pm_runtime_get_sync(d40c->base->dev); - res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); + res = d40_channel_execute_command(d40c, D40_DMA_STOP); if (res) { - chan_err(d40c, "suspend failed\n"); + chan_err(d40c, "stop failed\n"); goto out; } - if (chan_is_logical(d40c)) { - /* Release logical channel, deactivate the event line */ + d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0); - d40_config_set_event(d40c, false); + if (chan_is_logical(d40c)) d40c->base->lookup_log_chans[d40c->log_num] = NULL; - - /* - * Check if there are more logical allocation - * on this phy channel. - */ - if (!d40_alloc_mask_free(phy, is_src, event)) { - /* Resume the other logical channels if any */ - if (d40_chan_has_events(d40c)) { - res = d40_channel_execute_command(d40c, - D40_DMA_RUN); - if (res) - chan_err(d40c, - "Executing RUN command\n"); - } - goto out; - } - } else { - (void) d40_alloc_mask_free(phy, is_src, 0); - } - - /* Release physical channel */ - res = d40_channel_execute_command(d40c, D40_DMA_STOP); - if (res) { - chan_err(d40c, "Failed to stop channel\n"); - goto out; - } + else + d40c->base->lookup_phy_chans[phy->num] = NULL; if (d40c->busy) { pm_runtime_mark_last_busy(d40c->base->dev); @@ -1852,7 +1898,6 @@ static int d40_free_dma(struct d40_chan *d40c) d40c->busy = false; d40c->phy_chan = NULL; d40c->configured = false; - d40c->base->lookup_phy_chans[phy->num] = NULL; out: pm_runtime_mark_last_busy(d40c->base->dev); @@ -2371,6 +2416,31 @@ static void d40_issue_pending(struct dma_chan *chan) spin_unlock_irqrestore(&d40c->lock, flags); } +static void d40_terminate_all(struct dma_chan *chan) +{ + unsigned long flags; + struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); + int ret; + + spin_lock_irqsave(&d40c->lock, flags); + + pm_runtime_get_sync(d40c->base->dev); + ret = d40_channel_execute_command(d40c, D40_DMA_STOP); + if (ret) + chan_err(d40c, "Failed to stop channel\n"); + + d40_term_all(d40c); + pm_runtime_mark_last_busy(d40c->base->dev); + pm_runtime_put_autosuspend(d40c->base->dev); + if (d40c->busy) { + pm_runtime_mark_last_busy(d40c->base->dev); + pm_runtime_put_autosuspend(d40c->base->dev); + } + d40c->busy = false; + + spin_unlock_irqrestore(&d40c->lock, flags); +} + static int dma40_config_to_halfchannel(struct d40_chan *d40c, struct stedma40_half_channel_info *info, @@ -2551,7 +2621,8 @@ static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, switch (cmd) { case DMA_TERMINATE_ALL: - return d40_terminate_all(d40c); + d40_terminate_all(chan); + return 0; case DMA_PAUSE: return d40_pause(d40c); case DMA_RESUME: @@ -2908,6 +2979,12 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) dev_info(&pdev->dev, "hardware revision: %d @ 0x%x\n", rev, res->start); + if (rev < 2) { + d40_err(&pdev->dev, "hardware revision: %d is not supported", + rev); + goto failure; + } + plat_data = pdev->dev.platform_data; /* Count the number of logical channels in use */ @@ -2998,6 +3075,7 @@ failure: if (base) { kfree(base->lcla_pool.alloc_map); + kfree(base->reg_val_backup_chan); kfree(base->lookup_log_chans); kfree(base->lookup_phy_chans); kfree(base->phy_res); diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h index 8d3d490968a3..51e8e5396e9b 100644 --- a/drivers/dma/ste_dma40_ll.h +++ b/drivers/dma/ste_dma40_ll.h @@ -62,8 +62,6 @@ #define D40_SREG_ELEM_LOG_LIDX_MASK (0xFF << D40_SREG_ELEM_LOG_LIDX_POS) /* Link register */ -#define D40_DEACTIVATE_EVENTLINE 0x0 -#define D40_ACTIVATE_EVENTLINE 0x1 #define D40_EVENTLINE_POS(i) (2 * i) #define D40_EVENTLINE_MASK(i) (0x3 << D40_EVENTLINE_POS(i)) -- cgit v1.2.3 From 15e4b78d7338a41b020d29dab7ac13a234ebe833 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 12 Apr 2012 18:12:43 +0200 Subject: dma/ste_dma40: explicitly include regulator consumer header The patch "ARM: amba: Remove AMBA level regulator support" breaks the DMA40 driver since the header implicitly included the regulator consumer header. So include it explicitly and fix the build error. Cc: Mark Brown Signed-off-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index c5f26cc2c277..94170424ce29 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -18,6 +18,7 @@ #include #include #include +#include #include -- cgit v1.2.3 From 7e426da823fc7cd428b82ff2cf3615da24c73352 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 12 Apr 2012 18:12:52 +0200 Subject: dma/ste_dma40: fix erroneous comparison A small fallout from Vinod's conversions to dma_transfer_direction, this small comparison was done with a dma_data_direction instead. Fix it by comparing against the correct enum. Signed-off-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 94170424ce29..2ed1ac3513f3 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2116,7 +2116,7 @@ d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src, if (sg_next(&sg_src[sg_len - 1]) == sg_src) desc->cyclic = true; - if (direction != DMA_NONE) { + if (direction != DMA_TRANS_NONE) { dma_addr_t dev_addr = d40_get_dev_addr(chan, direction); if (direction == DMA_DEV_TO_MEM) -- cgit v1.2.3 From 64ea57d0c77bd85003b63c6090ddfae114ef6508 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 15 Apr 2012 20:38:05 +0200 Subject: ath9k: add an extra boolean parameter to ath9k_hw_apply_txpower In order to unifying regulatory limit handling commit ca2c68cc7bc80fc4504fb420df04cce99c9ee6ec (ath9k_hw: clean up tx power handling) introduced a new helper function 'ath9k_hw_apply_txpower', and the direct calls of 'ah->eep_ops->set_txpower' has been replaced by a call of the helper function. This caused a change in the behaviour of the 'ath9k_hw_set_txpowerlimit' function. The purpose of that function is to calculate and store the rate txpower table and the regulatory limit without touching the hardware registers. Before the commit, the 'test' parameter of the function was passed to the 'ah->eep_ops->set_txpower'. Now the calling of the 'set_txpower' function happens indirectly through 'ath9k_hw_apply_txpower', so the 'test' argument of the 'set_txpower' is always 'false'. This patch restores the original behaviour of 'ath9k_hw_set_txpowerlimit' by adding a new argument to 'ath9k_hw_apply_txpower.' Signed-off-by: Gabor Juhos Acked-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_paprd.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +- drivers/net/wireless/ath/ath9k/hw.c | 9 +++++---- drivers/net/wireless/ath/ath9k/hw.h | 3 ++- 5 files changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index d7d8e9199140..aba088005b22 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -869,7 +869,7 @@ static int ar5008_hw_process_ini(struct ath_hw *ah, ar5008_hw_set_channel_regs(ah, chan); ar5008_hw_init_chain_masks(ah); ath9k_olc_init(ah); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); /* Write analog registers */ if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) { diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c index 59647a3ceb7f..3d400e8d6535 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c @@ -54,7 +54,7 @@ void ar9003_paprd_enable(struct ath_hw *ah, bool val) if (val) { ah->paprd_table_write_done = true; - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); } REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL0_B0, diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index bc992b237ae5..deb6cfb2959a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -694,7 +694,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah, ar9003_hw_override_ini(ah); ar9003_hw_set_channel_regs(ah, chan); ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); if (AR_SREV_9462(ah)) { if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 6c69e4e8b1cb..fa84e37bf091 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1454,7 +1454,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, return false; } ath9k_hw_set_clockrate(ah); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); ath9k_hw_rfbus_done(ah); if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan)) @@ -2652,7 +2652,8 @@ static int get_antenna_gain(struct ath_hw *ah, struct ath9k_channel *chan) return ah->eep_ops->get_eeprom(ah, gain_param); } -void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan) +void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, + bool test) { struct ath_regulatory *reg = ath9k_hw_regulatory(ah); struct ieee80211_channel *channel; @@ -2673,7 +2674,7 @@ void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan) ah->eep_ops->set_txpower(ah, chan, ath9k_regd_get_ctl(reg, chan), - ant_reduction, new_pwr, false); + ant_reduction, new_pwr, test); } void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test) @@ -2686,7 +2687,7 @@ void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test) if (test) channel->max_power = MAX_RATE_POWER / 2; - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, test); if (test) channel->max_power = DIV_ROUND_UP(reg->max_power_level, 2); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index aa1680a0c7fd..e88f182ff45c 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -985,7 +985,8 @@ void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len); /* PHY */ void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled, u32 *coef_mantissa, u32 *coef_exponent); -void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan); +void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, + bool test); /* * Code Specific to AR5008, AR9001 or AR9002, -- cgit v1.2.3 From 83722bd4aede80714f75bedc3cce9b6ea9baea7b Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 15 Apr 2012 20:38:06 +0200 Subject: ath9k: fix tx power settings for AR9287 The 'ath9k_hw_update_regulatory_maxpower' helper function has been introduced by commit a55f858852e4345d0a31af593c46738ca8614bff (ath9k_hw: Cleanup TX power calculation for AR9287). Updating of the max_power_level value has been moved into the helper function in that change, however the removed code from 'ath9k_hw_ar9287_set_txpower' has not been replaced with a call of the new helper function. Due to that missing call, retrieving tx power for 2x2 and 3x3 chainmask is not handled properly. During the calculation of the tx power for 2x2 and 3x3 chainmasks the values are reduced. Those reductions must be compensated during retrieving. Fix this by adding the missing call of the helper function. Signed-off-by: Gabor Juhos Acked-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom_9287.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c index f272236d8053..b34e8b2990b1 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c @@ -824,6 +824,8 @@ static void ath9k_hw_ar9287_set_txpower(struct ath_hw *ah, regulatory->max_power_level = ratesArray[i]; } + ath9k_hw_update_regulatory_maxpower(ah); + if (test) return; -- cgit v1.2.3 From 8db4c7e25d153fb049e81715d72fa3be3a0c3b69 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 18 Apr 2012 08:01:15 -0700 Subject: iwlwifi: do not nulify ctx->vif on reset ctx->vif is dereferenced in different part of iwlwifi code, so do not nullify it. This should address at least one of the possible reasons of WARNING at iwlagn_mac_remove_interface, and perhaps some random crashes when firmware reset is performed. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 3 --- drivers/net/wireless/iwlwifi/iwl-mac80211.c | 10 +++++++++- 2 files changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index f1226dbf789d..2a9a16f901c3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -863,7 +863,6 @@ static void iwl_bg_run_time_calib_work(struct work_struct *work) void iwlagn_prepare_restart(struct iwl_priv *priv) { - struct iwl_rxon_context *ctx; bool bt_full_concurrent; u8 bt_ci_compliance; u8 bt_load; @@ -872,8 +871,6 @@ void iwlagn_prepare_restart(struct iwl_priv *priv) lockdep_assert_held(&priv->mutex); - for_each_context(priv, ctx) - ctx->vif = NULL; priv->is_open = 0; /* diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c index b6805f8e9a01..c24a7134a6f9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c +++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c @@ -1244,6 +1244,7 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, struct iwl_rxon_context *tmp, *ctx = NULL; int err; enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif); + bool reset = false; IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n", viftype, vif->addr); @@ -1265,6 +1266,13 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, tmp->interface_modes | tmp->exclusive_interface_modes; if (tmp->vif) { + /* On reset we need to add the same interface again */ + if (tmp->vif == vif) { + reset = true; + ctx = tmp; + break; + } + /* check if this busy context is exclusive */ if (tmp->exclusive_interface_modes & BIT(tmp->vif->type)) { @@ -1291,7 +1299,7 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, ctx->vif = vif; err = iwl_setup_interface(priv, ctx); - if (!err) + if (!err || reset) goto out; ctx->vif = NULL; -- cgit v1.2.3 From dd447319895d0c0af423e483d9b63f84f3f8869a Mon Sep 17 00:00:00 2001 From: Stanislav Yakovlev Date: Thu, 19 Apr 2012 15:55:09 -0400 Subject: ipw2200: Fix race condition in the command completion acknowledge Driver incorrectly validates command completion: instead of waiting for a command to be acknowledged it continues execution. Most of the time driver gets acknowledge of the command completion in a tasklet before it executes the next one. But sometimes it sends the next command before it gets acknowledge for the previous one. In such a case one of the following error messages appear in the log: Failed to send SYSTEM_CONFIG: Already sending a command. Failed to send ASSOCIATE: Already sending a command. Failed to send TX_POWER: Already sending a command. After that you need to reload the driver to get it working again. This bug occurs during roaming (reported by Sam Varshavchik) https://bugzilla.redhat.com/show_bug.cgi?id=738508 and machine booting (reported by Tom Gundersen and Mads Kiilerich) https://bugs.archlinux.org/task/28097 https://bugzilla.redhat.com/show_bug.cgi?id=802106 This patch doesn't fix the delay issue during firmware load. But at least device now works as usual after boot. Cc: stable@kernel.org Signed-off-by: Stanislav Yakovlev Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2200.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 2b022571a859..1779db3aa2b0 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -2191,6 +2191,7 @@ static int __ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd) { int rc = 0; unsigned long flags; + unsigned long now, end; spin_lock_irqsave(&priv->lock, flags); if (priv->status & STATUS_HCMD_ACTIVE) { @@ -2232,10 +2233,20 @@ static int __ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd) } spin_unlock_irqrestore(&priv->lock, flags); + now = jiffies; + end = now + HOST_COMPLETE_TIMEOUT; +again: rc = wait_event_interruptible_timeout(priv->wait_command_queue, !(priv-> status & STATUS_HCMD_ACTIVE), - HOST_COMPLETE_TIMEOUT); + end - now); + if (rc < 0) { + now = jiffies; + if (time_before(now, end)) + goto again; + rc = 0; + } + if (rc == 0) { spin_lock_irqsave(&priv->lock, flags); if (priv->status & STATUS_HCMD_ACTIVE) { -- cgit v1.2.3 From 44eb65cfd8da4b9c231238998729e858e963a980 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 19 Apr 2012 21:39:06 -0500 Subject: rtlwifi: Fix oops on unload Under some circumstances, a PCI-based driver reports the following OOPs: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Oops: 0000 [#1] SMP --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Pid: 19627, comm: rmmod Not tainted 3.2.9-2.fc16.x86_64 #1 LENOVO 05962RU/05962RU Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP: 0010:[] [] rtl92ce_get_desc+0x19/0xd0 [rtl8192ce] --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Process rmmod (pid: 19627, threadinfo ffff880050262000, task ffff8801156d5cc0) Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Stack: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] 0000000000000002 ffff8801176c2540 ffff880050263ca8 ffffffffa03348e7 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] 0000000000000282 0000000180150014 ffff880050263fd8 ffff8801176c2810 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] ffff880050263bc8 ffffffff810550e2 00000000000002c0 ffff8801176c0d40 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Call Trace: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] [] _rtl_pci_rx_interrupt+0x187/0x650 [rtlwifi] --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Code: ff 09 d0 89 07 48 83 c4 08 5b 5d c3 66 0f 1f 44 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 40 84 f6 89 d3 74 13 84 d2 75 57 <8b> 07 48 83 c4 08 5b 5d c1 e8 1f c3 0f 1f 00 84 d2 74 ed 80 fa Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP [] rtl92ce_get_desc+0x19/0xd0 [rtl8192ce] Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RSP Mar 19 08:14:35 kvothe kernel: [ 6584.626011] CR2: 00000000000006e0 Mar 19 08:14:35 kvothe kernel: [ 6584.646491] ---[ end trace 8636c766dcfbe0e6 ]--- This oops is due to interrupts not being disabled in this particular path. Reported-by: Dave Airlie Tested-by: Dave Airlie Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 288b035a3579..cc15fdb36060 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1941,6 +1941,7 @@ void rtl_pci_disconnect(struct pci_dev *pdev) rtl_deinit_deferred_work(hw); rtlpriv->intf_ops->adapter_stop(hw); } + rtlpriv->cfg->ops->disable_interrupt(hw); /*deinit rfkill */ rtl_deinit_rfkill(hw); -- cgit v1.2.3 From 6ead629b27269c553c9092c47cd8f5ab0309ee3b Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Sun, 22 Apr 2012 00:48:04 +0200 Subject: brcmsmac: "INTERMEDIATE but not AMPDU" only when tracing I keep getting the following messages on the log buffer: [ 2167.097507] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.331305] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.332539] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.876605] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.877354] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2462.280756] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2615.651689] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU From the code comment I understand that this something that can - and does, quite frequently - happen. Signed-off-by: Eldad Zack Acked-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 7083db75b00c..b4d92792c502 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -847,8 +847,7 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs) */ if (!(txs->status & TX_STATUS_AMPDU) && (txs->status & TX_STATUS_INTERMEDIATE)) { - wiphy_err(wlc->wiphy, "%s: INTERMEDIATE but not AMPDU\n", - __func__); + BCMMSG(wlc->wiphy, "INTERMEDIATE but not AMPDU\n"); return false; } -- cgit v1.2.3 From 2a14e541ed87bca0c125b82961ca3c6f808607d2 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Sun, 22 Apr 2012 23:03:17 -0400 Subject: ACPI: Convert wake_sleep_flags to a value instead of function With commit a2ef5c4fd44ce3922435139393b89f2cce47f576 "ACPI: Move module parameter gts and bfs to sleep.c" the wake_sleep_flags is required when calling acpi_enter_sleep_state, which means that if there are functions outside the sleep.c code they can't get the wake_sleep_flags values. This converts the function in to a exported value and converts the module config operands to a function. Acked-by: Rafael J. Wysocki Acked-by: Lin Ming [v2: Parameters can be turned on/off dynamically] [v3: unsigned char -> u8] [v4: val -> kp->arg] Signed-off-by: Konrad Rzeszutek Wilk Link: http://lkml.kernel.org/r/1335150198-21899-2-git-send-email-konrad.wilk@oracle.com Signed-off-by: H. Peter Anvin --- drivers/acpi/sleep.c | 52 ++++++++++++++++++++++++++++------------------------ 1 file changed, 28 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 1d661b5c3287..eb6fd233764b 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -28,23 +28,33 @@ #include "internal.h" #include "sleep.h" +u8 wake_sleep_flags = ACPI_NO_OPTIONAL_METHODS; static unsigned int gts, bfs; -module_param(gts, uint, 0644); -module_param(bfs, uint, 0644); -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); - -static u8 wake_sleep_flags(void) +static int set_param_wake_flag(const char *val, struct kernel_param *kp) { - u8 flags = ACPI_NO_OPTIONAL_METHODS; + int ret = param_set_int(val, kp); - if (gts) - flags |= ACPI_EXECUTE_GTS; - if (bfs) - flags |= ACPI_EXECUTE_BFS; + if (ret) + return ret; - return flags; + if (kp->arg == (const char *)>s) { + if (gts) + wake_sleep_flags |= ACPI_EXECUTE_GTS; + else + wake_sleep_flags &= ~ACPI_EXECUTE_GTS; + } + if (kp->arg == (const char *)&bfs) { + if (bfs) + wake_sleep_flags |= ACPI_EXECUTE_BFS; + else + wake_sleep_flags &= ~ACPI_EXECUTE_BFS; + } + return ret; } +module_param_call(gts, set_param_wake_flag, param_get_int, >s, 0644); +module_param_call(bfs, set_param_wake_flag, param_get_int, &bfs, 0644); +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); static u8 sleep_states[ACPI_S_STATE_COUNT]; @@ -263,7 +273,6 @@ static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; u32 acpi_state = acpi_target_sleep_state; - u8 flags = wake_sleep_flags(); int error; ACPI_FLUSH_CPU_CACHE(); @@ -271,7 +280,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) switch (acpi_state) { case ACPI_STATE_S1: barrier(); - status = acpi_enter_sleep_state(acpi_state, flags); + status = acpi_enter_sleep_state(acpi_state, wake_sleep_flags); break; case ACPI_STATE_S3: @@ -286,7 +295,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state, flags); + acpi_leave_sleep_state_prep(acpi_state, wake_sleep_flags); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the @@ -550,30 +559,27 @@ static int acpi_hibernation_begin(void) static int acpi_hibernation_enter(void) { - u8 flags = wake_sleep_flags(); acpi_status status = AE_OK; ACPI_FLUSH_CPU_CACHE(); /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4, flags); + status = acpi_enter_sleep_state(ACPI_STATE_S4, wake_sleep_flags); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } static void acpi_hibernation_leave(void) { - u8 flags = wake_sleep_flags(); - /* * If ACPI is not enabled by the BIOS and the boot kernel, we need to * enable it here. */ acpi_enable(); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) { printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " @@ -828,12 +834,10 @@ static void acpi_power_off_prepare(void) static void acpi_power_off(void) { - u8 flags = wake_sleep_flags(); - /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enter_sleep_state(ACPI_STATE_S5, flags); + acpi_enter_sleep_state(ACPI_STATE_S5, wake_sleep_flags); } /* -- cgit v1.2.3 From ed8cd3b2cd61004cab85380c52b1817aca1ca49b Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 23 Apr 2012 04:06:41 -0400 Subject: drm/i915: fix integer overflow in i915_gem_execbuffer2() On 32-bit systems, a large args->buffer_count from userspace via ioctl may overflow the allocation size, leading to out-of-bounds access. This vulnerability was introduced in commit 8408c282 ("drm/i915: First try a normal large kmalloc for the temporary exec buffers"). Signed-off-by: Xi Wang Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index f51a696486cb..7c50e58175c0 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1404,7 +1404,8 @@ i915_gem_execbuffer2(struct drm_device *dev, void *data, struct drm_i915_gem_exec_object2 *exec2_list = NULL; int ret; - if (args->buffer_count < 1) { + if (args->buffer_count < 1 || + args->buffer_count > UINT_MAX / sizeof(*exec2_list)) { DRM_DEBUG("execbuf2 with %d buffers\n", args->buffer_count); return -EINVAL; } -- cgit v1.2.3 From 44afb3a04391a74309d16180d1e4f8386fdfa745 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 23 Apr 2012 04:06:42 -0400 Subject: drm/i915: fix integer overflow in i915_gem_do_execbuffer() On 32-bit systems, a large args->num_cliprects from userspace via ioctl may overflow the allocation size, leading to out-of-bounds access. This vulnerability was introduced in commit 432e58ed ("drm/i915: Avoid allocation for execbuffer object list"). Signed-off-by: Xi Wang Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 7c50e58175c0..de431942ded4 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1133,6 +1133,11 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, return -EINVAL; } + if (args->num_cliprects > UINT_MAX / sizeof(*cliprects)) { + DRM_DEBUG("execbuf with %u cliprects\n", + args->num_cliprects); + return -EINVAL; + } cliprects = kmalloc(args->num_cliprects * sizeof(*cliprects), GFP_KERNEL); if (cliprects == NULL) { -- cgit v1.2.3 From 9bbf56609d304e8aae2076610d938206453035de Mon Sep 17 00:00:00 2001 From: Stephane Fillod Date: Fri, 20 Apr 2012 09:39:23 +0000 Subject: net: usb: smsc95xx: fix mtu Make smsc95xx recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1488 bytes, and the host is unable to receive standard 1500-byte frames from the device. Inspired by same fix on cdc_eem 78fb72f7936c01d5b426c03a691eca082b03f2b9. Tested on ARM/Beagle. Signed-off-by: Stephane Fillod Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 5f19f84d3494..53a1ba5e0c2c 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1017,6 +1017,7 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &smsc95xx_ethtool_ops; dev->net->flags |= IFF_MULTICAST; dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM; + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; return 0; } -- cgit v1.2.3 From 7e665afbb561544d6fcc3334285db5809a38d2c8 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Sun, 22 Apr 2012 21:21:41 +0000 Subject: qeth: allow change of blkt default values There exist qeth sysfs blkt attributes to change the default blkt values. But blkt changes are reset during online setting due to a 2nd invocation of qeth_determine_capabilites(). This patch makes sure blkt default values are configured during 1st run of qeth_determine_capabilities() only. Thus blkt changes are kept during online setting. Signed-off-by: Ursula Braun Reported-by: Horst Hartmann Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 120955c66410..d78d0cedf637 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4540,7 +4540,8 @@ static void qeth_determine_capabilities(struct qeth_card *card) goto out_offline; } qeth_configure_unitaddr(card, prcd); - qeth_configure_blkt_default(card, prcd); + if (ddev_offline) + qeth_configure_blkt_default(card, prcd); kfree(prcd); rc = qdio_get_ssqd_desc(ddev, &card->ssqd); -- cgit v1.2.3 From e6e056baa24b48642b86129e8a3fdaa98f2fe947 Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Sun, 22 Apr 2012 21:21:42 +0000 Subject: qeth: Use blkt defaults for OSA Express 4 The previous blkt defaults for OSA Express 4 cards produced inadequate performance for streaming workloads. The present patch will apply a set of more appropriate defaults. Signed-off-by: Stefan Raspl Reviewed-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index d78d0cedf637..8334dadc681d 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1672,7 +1672,8 @@ static void qeth_configure_blkt_default(struct qeth_card *card, char *prcd) { QETH_DBF_TEXT(SETUP, 2, "cfgblkt"); - if (prcd[74] == 0xF0 && prcd[75] == 0xF0 && prcd[76] == 0xF5) { + if (prcd[74] == 0xF0 && prcd[75] == 0xF0 && + (prcd[76] == 0xF5 || prcd[76] == 0xF6)) { card->info.blkt.time_total = 250; card->info.blkt.inter_packet = 5; card->info.blkt.inter_packet_jumbo = 15; -- cgit v1.2.3 From c2f1244b86492b6cc89202f3f9ed43c88fb3e79d Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 23 Apr 2012 03:46:29 +0000 Subject: ehea: only register irq after setting up ports If we receive an interrupt too early before we set up ports in the probe function, there won't be any port ready to handle it. Only registering the irq after the ports are setup fixes the problem, and works fine without losing any interrupts. This causes crashes in some situations: [c000000f7ff7fd60] d000000008e223f0 .ehea_neq_tasklet+0x78/0x148 [ehea] [c000000f7ff7fe00] c0000000000b6cac .tasklet_hi_action+0xdc/0x210 [c000000f7ff7fea0] c0000000000b7cc8 .__do_softirq+0x178/0x300 [c000000f7ff7ff90] c000000000022694 .call_do_softirq+0x14/0x24 [c000000f68ee7900] c000000000010e04 .do_softirq+0xec/0x110 [c000000f68ee79a0] c0000000000b789c .irq_exit+0xac/0xe0 [c000000f68ee7a20] c0000000000110bc .do_IRQ+0x114/0x2a8 [c000000f68ee7ae0] c00000000000553c hardware_interrupt_entry+0x18/0x1c Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 3516e17a399d..acf34b671547 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -3261,6 +3261,7 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, struct ehea_adapter *adapter; const u64 *adapter_handle; int ret; + int i; if (!dev || !dev->dev.of_node) { pr_err("Invalid ibmebus device probed\n"); @@ -3314,17 +3315,9 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, tasklet_init(&adapter->neq_tasklet, ehea_neq_tasklet, (unsigned long)adapter); - ret = ibmebus_request_irq(adapter->neq->attr.ist1, - ehea_interrupt_neq, IRQF_DISABLED, - "ehea_neq", adapter); - if (ret) { - dev_err(&dev->dev, "requesting NEQ IRQ failed\n"); - goto out_kill_eq; - } - ret = ehea_create_device_sysfs(dev); if (ret) - goto out_free_irq; + goto out_kill_eq; ret = ehea_setup_ports(adapter); if (ret) { @@ -3332,15 +3325,28 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, goto out_rem_dev_sysfs; } + ret = ibmebus_request_irq(adapter->neq->attr.ist1, + ehea_interrupt_neq, IRQF_DISABLED, + "ehea_neq", adapter); + if (ret) { + dev_err(&dev->dev, "requesting NEQ IRQ failed\n"); + goto out_shutdown_ports; + } + + ret = 0; goto out; +out_shutdown_ports: + for (i = 0; i < EHEA_MAX_PORTS; i++) + if (adapter->port[i]) { + ehea_shutdown_single_port(adapter->port[i]); + adapter->port[i] = NULL; + } + out_rem_dev_sysfs: ehea_remove_device_sysfs(dev); -out_free_irq: - ibmebus_free_irq(adapter->neq->attr.ist1, adapter); - out_kill_eq: ehea_destroy_eq(adapter->neq); -- cgit v1.2.3 From 1ab8be4a14409c55050db69271631afebac29b5a Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Mon, 23 Apr 2012 12:06:43 +0000 Subject: net/davinci_emac: fix failing PHY connect attempts PHY connect attempts fail if no PHY id is specified in the emac platform data and another mdio bus has been registered before 'davinci_mdio' bus. In this case when configuring the interface, there will be an attempt to connect to already attached PHY on the previously registered mdio bus: net eth1: PHY already attached net eth1: could not connect to phy smsc911x-0:01 IP-Config: Failed to open eth1 IP-Config: Device `eth1' not found Fix this by modifying match_first_device() to match first PHY device on 'davinci_mdio' bus. Signed-off-by: Anatolij Gustschin Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 174a3348f676..08aff1a2087c 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1511,7 +1511,7 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) static int match_first_device(struct device *dev, void *data) { - return 1; + return !strncmp(dev_name(dev), "davinci_mdio", 12); } /** -- cgit v1.2.3 From 2a5809499e35b53a6044fd34e72b242688b7a862 Mon Sep 17 00:00:00 2001 From: Ingo van Lil Date: Mon, 23 Apr 2012 22:05:38 +0000 Subject: asix: Fix tx transfer padding for full-speed USB The asix.c USB Ethernet driver avoids ending a tx transfer with a zero- length packet by appending a four-byte padding to transfers whose length is a multiple of maxpacket. However, the hard-coded 512 byte maxpacket length is valid for high-speed USB only; full-speed USB uses 64 byte packets. Signed-off-by: Ingo van Lil Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 5ee032cafade..42b5151aa78a 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -355,7 +355,7 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, u32 packet_len; u32 padbytes = 0xffff0000; - padlen = ((skb->len + 4) % 512) ? 0 : 4; + padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) { @@ -377,7 +377,7 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, cpu_to_le32s(&packet_len); skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); - if ((skb->len % 512) == 0) { + if (padlen) { cpu_to_le32s(&padbytes); memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); skb_put(skb, sizeof(padbytes)); -- cgit v1.2.3 From 985140369be1e886754d8ac0375dd64e4f727311 Mon Sep 17 00:00:00 2001 From: Steven Harms Date: Fri, 13 Apr 2012 14:45:55 -0400 Subject: Add Foxconn / Hon Hai IDs for btusb module This change adds 0x0489:0xe033 to the btusb module. This bluetooth usb device is integrated in the Acer TimelineX AS4830TG-6808 notebook. Output from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e033 Rev= 2.29 S: Manufacturer=Broadcom Corp S: Product=Acer Module S: SerialNumber=60D819F74101 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Steven Harms Signed-off-by: Gustavo Padovan --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 93cc828298c4..9217121362e1 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -108,6 +108,9 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE(0x0a5c, 0x21f3) }, { USB_DEVICE(0x413c, 0x8197) }, + /* Foxconn - Hon Hai */ + { USB_DEVICE(0x0489, 0xe033) }, + { } /* Terminating entry */ }; -- cgit v1.2.3 From 5ef4acd58ab2abd0dd0c8e3cacd61a0dc5d73646 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Apr 2012 14:17:50 -0700 Subject: iwlwifi: fix hardware queue programming Newer devices have 20 (5000 series) or 30 (6000 series) hardware queues, rather than the 16 that 4965 had. This was added to the driver a long time ago, but improperly: the queue registers for the higher queues aren't just continuations of the registers for the first 16 queues, they are in other places. Therefore, the hardware would lock up when trying to activate queue 16 or above and the device would have to be restarted. Thanks goes to Emmanuel who identified this and told me how the queue programming should be done. Note that we don't use queues 20 and higher today and doing so needs more work than this. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-fh.h | 24 +++++++++++++++++++----- drivers/net/wireless/iwlwifi/iwl-prph.h | 27 ++++++++++++++++++++++++--- 2 files changed, 43 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 90208094b8eb..74bce97a8600 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -104,15 +104,29 @@ * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte * aligned (address bits 0-7 must be 0). + * Later devices have 20 (5000 series) or 30 (higher) queues, but the registers + * for them are in different places. * * Bit fields in each pointer register: * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned */ -#define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) -#define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) - -/* Find TFD CB base pointer for given queue (range 0-15). */ -#define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4) +#define FH_MEM_CBBC_0_15_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) +#define FH_MEM_CBBC_0_15_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) +#define FH_MEM_CBBC_16_19_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBF0) +#define FH_MEM_CBBC_16_19_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_CBBC_20_31_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xB20) +#define FH_MEM_CBBC_20_31_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xB80) + +/* Find TFD CB base pointer for given queue */ +static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) +{ + if (chnl < 16) + return FH_MEM_CBBC_0_15_LOWER_BOUND + 4 * chnl; + if (chnl < 20) + return FH_MEM_CBBC_16_19_LOWER_BOUND + 4 * (chnl - 16); + WARN_ON_ONCE(chnl >= 32); + return FH_MEM_CBBC_20_31_LOWER_BOUND + 4 * (chnl - 20); +} /** diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 75dc20bd965b..3b1069290fa9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -223,12 +223,33 @@ #define SCD_AIT (SCD_BASE + 0x0c) #define SCD_TXFACT (SCD_BASE + 0x10) #define SCD_ACTIVE (SCD_BASE + 0x14) -#define SCD_QUEUE_WRPTR(x) (SCD_BASE + 0x18 + (x) * 4) -#define SCD_QUEUE_RDPTR(x) (SCD_BASE + 0x68 + (x) * 4) #define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8) #define SCD_AGGR_SEL (SCD_BASE + 0x248) #define SCD_INTERRUPT_MASK (SCD_BASE + 0x108) -#define SCD_QUEUE_STATUS_BITS(x) (SCD_BASE + 0x10c + (x) * 4) + +static inline unsigned int SCD_QUEUE_WRPTR(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x18 + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x284 + (chnl - 20) * 4; +} + +static inline unsigned int SCD_QUEUE_RDPTR(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x68 + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x2B4 + (chnl - 20) * 4; +} + +static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x10c + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x384 + (chnl - 20) * 4; +} /*********************** END TX SCHEDULER *************************************/ -- cgit v1.2.3 From 78cbcf2b9dbe0565820dc7721316f9c401000a68 Mon Sep 17 00:00:00 2001 From: Meenakshi Venkataraman Date: Sun, 22 Apr 2012 07:55:27 -0700 Subject: iwlwifi: use correct released ucode version Report correctly the latest released version of the iwlwifi firmware for all iwlwifi-supported devices. Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Meenakshi Venkataraman Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-1000.c | 8 ++++---- drivers/net/wireless/iwlwifi/iwl-2000.c | 16 ++++++++-------- drivers/net/wireless/iwlwifi/iwl-5000.c | 11 +++++++++-- drivers/net/wireless/iwlwifi/iwl-6000.c | 10 ++++++---- 4 files changed, 27 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 5b0d888f746b..8d80e233bc7a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -46,8 +46,8 @@ #include "iwl-prph.h" /* Highest firmware API version supported */ -#define IWL1000_UCODE_API_MAX 6 -#define IWL100_UCODE_API_MAX 6 +#define IWL1000_UCODE_API_MAX 5 +#define IWL100_UCODE_API_MAX 5 /* Oldest version we won't warn about */ #define IWL1000_UCODE_API_OK 5 @@ -226,5 +226,5 @@ const struct iwl_cfg iwl100_bg_cfg = { IWL_DEVICE_100, }; -MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c index 5635b9e2c69e..ea108622e0bd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/iwlwifi/iwl-2000.c @@ -51,10 +51,10 @@ #define IWL135_UCODE_API_MAX 6 /* Oldest version we won't warn about */ -#define IWL2030_UCODE_API_OK 5 -#define IWL2000_UCODE_API_OK 5 -#define IWL105_UCODE_API_OK 5 -#define IWL135_UCODE_API_OK 5 +#define IWL2030_UCODE_API_OK 6 +#define IWL2000_UCODE_API_OK 6 +#define IWL105_UCODE_API_OK 6 +#define IWL135_UCODE_API_OK 6 /* Lowest firmware API version supported */ #define IWL2030_UCODE_API_MIN 5 @@ -328,7 +328,7 @@ const struct iwl_cfg iwl135_bgn_cfg = { .ht_params = &iwl2000_ht_params, }; -MODULE_FIRMWARE(IWL2000_MODULE_FIRMWARE(IWL2000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL2030_MODULE_FIRMWARE(IWL2030_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL105_MODULE_FIRMWARE(IWL105_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL135_MODULE_FIRMWARE(IWL135_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL2000_MODULE_FIRMWARE(IWL2000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL2030_MODULE_FIRMWARE(IWL2030_UCODE_API_OK)); +MODULE_FIRMWARE(IWL105_MODULE_FIRMWARE(IWL105_UCODE_API_OK)); +MODULE_FIRMWARE(IWL135_MODULE_FIRMWARE(IWL135_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index a805e97b89af..de0920c74cdd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -51,6 +51,10 @@ #define IWL5000_UCODE_API_MAX 5 #define IWL5150_UCODE_API_MAX 2 +/* Oldest version we won't warn about */ +#define IWL5000_UCODE_API_OK 5 +#define IWL5150_UCODE_API_OK 2 + /* Lowest firmware API version supported */ #define IWL5000_UCODE_API_MIN 1 #define IWL5150_UCODE_API_MIN 1 @@ -326,6 +330,7 @@ static const struct iwl_ht_params iwl5000_ht_params = { #define IWL_DEVICE_5000 \ .fw_name_pre = IWL5000_FW_PRE, \ .ucode_api_max = IWL5000_UCODE_API_MAX, \ + .ucode_api_ok = IWL5000_UCODE_API_OK, \ .ucode_api_min = IWL5000_UCODE_API_MIN, \ .max_inst_size = IWLAGN_RTC_INST_SIZE, \ .max_data_size = IWLAGN_RTC_DATA_SIZE, \ @@ -371,6 +376,7 @@ const struct iwl_cfg iwl5350_agn_cfg = { .name = "Intel(R) WiMAX/WiFi Link 5350 AGN", .fw_name_pre = IWL5000_FW_PRE, .ucode_api_max = IWL5000_UCODE_API_MAX, + .ucode_api_ok = IWL5000_UCODE_API_OK, .ucode_api_min = IWL5000_UCODE_API_MIN, .max_inst_size = IWLAGN_RTC_INST_SIZE, .max_data_size = IWLAGN_RTC_DATA_SIZE, @@ -386,6 +392,7 @@ const struct iwl_cfg iwl5350_agn_cfg = { #define IWL_DEVICE_5150 \ .fw_name_pre = IWL5150_FW_PRE, \ .ucode_api_max = IWL5150_UCODE_API_MAX, \ + .ucode_api_ok = IWL5150_UCODE_API_OK, \ .ucode_api_min = IWL5150_UCODE_API_MIN, \ .max_inst_size = IWLAGN_RTC_INST_SIZE, \ .max_data_size = IWLAGN_RTC_DATA_SIZE, \ @@ -409,5 +416,5 @@ const struct iwl_cfg iwl5150_abg_cfg = { IWL_DEVICE_5150, }; -MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 64060cd738b5..b1b69515b1a0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -53,6 +53,8 @@ /* Oldest version we won't warn about */ #define IWL6000_UCODE_API_OK 4 #define IWL6000G2_UCODE_API_OK 5 +#define IWL6050_UCODE_API_OK 5 +#define IWL6000G2B_UCODE_API_OK 6 /* Lowest firmware API version supported */ #define IWL6000_UCODE_API_MIN 4 @@ -334,7 +336,7 @@ static const struct iwl_bt_params iwl6000_bt_params = { #define IWL_DEVICE_6005 \ .fw_name_pre = IWL6005_FW_PRE, \ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ + .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ @@ -557,6 +559,6 @@ const struct iwl_cfg iwl6000_3agn_cfg = { }; MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_OK)); -MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_OK)); +MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_OK)); +MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2B_UCODE_API_OK)); -- cgit v1.2.3 From a2cd62ec9a3a2805014bdc14e0644b5faa352d3c Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Fri, 20 Apr 2012 20:22:41 -0500 Subject: staging: tidspbridge: remove usage of OMAP2_L4_IO_ADDRESS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead now use ioremap. This is needed for 3.4 since this change emerged in mainline during one of the previous rc cycles. These solves the following compilation breaks: drivers/staging/tidspbridge/core/tiomap3430.c: In function ‘bridge_brd_start’: drivers/staging/tidspbridge/core/tiomap3430.c:425:4: error: implicit declaration of function ‘OMAP2_L4_IO_ADDRESS’ drivers/staging/tidspbridge/core/wdt.c: In function ‘dsp_wdt_init’: drivers/staging/tidspbridge/core/wdt.c:56:2: error: implicit declaration of function ‘OMAP2_L4_IO_ADDRESS’ For control registers a new function needs to be defined so we can get rid of a layer violation, but that approach must be queued for the next merge window. As seen in: http://www.arm.linux.org.uk/developer/build/ platform: omap4430-sdp build: uImage config: randconfig version: 3.4.0-rc3 start time: Apr 20 2012 01:07 Reported-by: Tony Lindgren Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/tiomap3430.c | 20 ++++++++++++-------- drivers/staging/tidspbridge/core/wdt.c | 8 +++++++- 2 files changed, 19 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c index 7862513cc295..9cf29fcea11e 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430.c +++ b/drivers/staging/tidspbridge/core/tiomap3430.c @@ -79,10 +79,6 @@ #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) - - /* Forward Declarations: */ static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt); static int bridge_brd_read(struct bridge_dev_context *dev_ctxt, @@ -418,19 +414,27 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, /* Assert RST1 i.e only the RST only for DSP megacell */ if (!status) { + /* + * XXX: ioremapping MUST be removed once ctrl + * function is made available. + */ + void __iomem *ctrl = ioremap(OMAP343X_CTRL_BASE, SZ_4K); + if (!ctrl) + return -ENOMEM; + (*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); /* Mask address with 1K for compatibility */ __raw_writel(dsp_addr & OMAP3_IVA2_BOOTADDR_MASK, - OMAP343X_CTRL_REGADDR( - OMAP343X_CONTROL_IVA2_BOOTADDR)); + ctrl + OMAP343X_CONTROL_IVA2_BOOTADDR); /* * Set bootmode to self loop if dsp_debug flag is true */ __raw_writel((dsp_debug) ? OMAP3_IVA2_BOOTMOD_IDLE : 0, - OMAP343X_CTRL_REGADDR( - OMAP343X_CONTROL_IVA2_BOOTMOD)); + ctrl + OMAP343X_CONTROL_IVA2_BOOTMOD); + + iounmap(ctrl); } } if (!status) { diff --git a/drivers/staging/tidspbridge/core/wdt.c b/drivers/staging/tidspbridge/core/wdt.c index 70055c8111ed..870f934f4f3b 100644 --- a/drivers/staging/tidspbridge/core/wdt.c +++ b/drivers/staging/tidspbridge/core/wdt.c @@ -53,7 +53,10 @@ int dsp_wdt_init(void) int ret = 0; dsp_wdt.sm_wdt = NULL; - dsp_wdt.reg_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_WDT3_BASE); + dsp_wdt.reg_base = ioremap(OMAP34XX_WDT3_BASE, SZ_4K); + if (!dsp_wdt.reg_base) + return -ENOMEM; + tasklet_init(&dsp_wdt.wdt3_tasklet, dsp_wdt_dpc, 0); dsp_wdt.fclk = clk_get(NULL, "wdt3_fck"); @@ -99,6 +102,9 @@ void dsp_wdt_exit(void) dsp_wdt.fclk = NULL; dsp_wdt.iclk = NULL; dsp_wdt.sm_wdt = NULL; + + if (dsp_wdt.reg_base) + iounmap(dsp_wdt.reg_base); dsp_wdt.reg_base = NULL; } -- cgit v1.2.3 From 349ae79c0a3db1632ac4db955c53db05fc017bde Mon Sep 17 00:00:00 2001 From: Seth Jennings Date: Mon, 23 Apr 2012 20:33:50 -0500 Subject: staging: zcache: fix Kconfig crypto dependency ZCACHE is a boolean in the Kconfig. When selected, it should require that CRYPTO be builtin (=y). Currently, ZCACHE=y and CRYPTO=m is a valid configuration when it should not be. This patch changes the zcache Kconfig to enforce this dependency. Signed-off-by: Seth Jennings Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/zcache/Kconfig b/drivers/staging/zcache/Kconfig index 3ed2c8f656a5..7048e01f0817 100644 --- a/drivers/staging/zcache/Kconfig +++ b/drivers/staging/zcache/Kconfig @@ -2,7 +2,7 @@ config ZCACHE bool "Dynamic compression of swap pages and clean pagecache pages" # X86 dependency is because zsmalloc uses non-portable pte/tlb # functions - depends on (CLEANCACHE || FRONTSWAP) && CRYPTO && X86 + depends on (CLEANCACHE || FRONTSWAP) && CRYPTO=y && X86 select ZSMALLOC select CRYPTO_LZO default n -- cgit v1.2.3 From dc890df0a77cafe5f4a3d81c0dade637c27f1934 Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Thu, 19 Apr 2012 12:27:27 +0200 Subject: staging: octeon-ethernet: fix build errors by including interrupt.h This patch fixes the following build failures: drivers/staging/octeon/ethernet.c: In function 'cvm_oct_cleanup_module': drivers/staging/octeon/ethernet.c:799:2: error: implicit declaration of function 'free_irq' drivers/staging/octeon/ethernet-rx.c: In function 'cvm_oct_no_more_work': drivers/staging/octeon/ethernet-rx.c:119:3: error: implicit declaration of function 'enable_irq' drivers/staging/octeon/ethernet-rx.c: In function 'cvm_oct_do_interrupt': drivers/staging/octeon/ethernet-rx.c:136:2: error: implicit declaration of function 'disable_irq_nosync' drivers/staging/octeon/ethernet-rx.c: In function 'cvm_oct_rx_initialize': drivers/staging/octeon/ethernet-rx.c:532:2: error: implicit declaration of function 'request_irq' drivers/staging/octeon/ethernet-tx.c: In function 'cvm_oct_tx_initialize': drivers/staging/octeon/ethernet-tx.c:712:2: error: implicit declaration of function 'request_irq' drivers/staging/octeon/ethernet-tx.c: In function 'cvm_oct_tx_shutdown': drivers/staging/octeon/ethernet-tx.c:723:2: error: implicit declaration of function 'free_irq' Signed-off-by: Imre Kaloz Acked-by: David Daney Signed-off-by: Greg Kroah-Hartman --- drivers/staging/octeon/ethernet-rx.c | 1 + drivers/staging/octeon/ethernet-tx.c | 1 + drivers/staging/octeon/ethernet.c | 1 + 3 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c index 400df8cbee53..d91751f9ffe8 100644 --- a/drivers/staging/octeon/ethernet-rx.c +++ b/drivers/staging/octeon/ethernet-rx.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #ifdef CONFIG_XFRM #include diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c index 56d74dc2fbd5..91a97b3e45c6 100644 --- a/drivers/staging/octeon/ethernet-tx.c +++ b/drivers/staging/octeon/ethernet-tx.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #ifdef CONFIG_XFRM #include diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index 9112cd882154..60cba8194de3 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -31,6 +31,7 @@ #include #include #include +#include #include -- cgit v1.2.3 From 6f6543f53f9ce136e01d7114bf6f0818ca54fb41 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 24 Apr 2012 11:29:42 +0200 Subject: usb gadget: uvc: uvc_request_data::length field must be signed The field is used to pass the UVC request data length, but can also be used to signal an error when setting it to a negative value. Switch from unsigned int to __s32. Reported-by: Fernandez Gonzalo Signed-off-by: Laurent Pinchart Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/uvc.h | 2 +- drivers/usb/gadget/uvc_v4l2.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h index bc78c606c12b..ca4e03a1c73a 100644 --- a/drivers/usb/gadget/uvc.h +++ b/drivers/usb/gadget/uvc.h @@ -28,7 +28,7 @@ struct uvc_request_data { - unsigned int length; + __s32 length; __u8 data[60]; }; diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c index f6e083b50191..54d7ca559cb2 100644 --- a/drivers/usb/gadget/uvc_v4l2.c +++ b/drivers/usb/gadget/uvc_v4l2.c @@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data) if (data->length < 0) return usb_ep_set_halt(cdev->gadget->ep0); - req->length = min(uvc->event_length, data->length); + req->length = min_t(unsigned int, uvc->event_length, data->length); req->zero = data->length < uvc->event_length; req->dma = DMA_ADDR_INVALID; -- cgit v1.2.3 From 151b61284776be2d6f02d48c23c3625678960b97 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Apr 2012 14:07:22 -0400 Subject: USB: EHCI: fix crash during suspend on ASUS computers This patch (as1545) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. This fixes Bugzilla #42728. Signed-off-by: Alan Stern Tested-by: Steven Rostedt Tested-by: Andrey Rahmatullin Tested-by: Oleksij Rempel (fishor) Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 9 +++++++++ drivers/usb/host/ehci-pci.c | 8 ++++++++ 2 files changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 622b4a48e732..57ed9e400c06 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev) pci_save_state(pci_dev); + /* + * Some systems crash if an EHCI controller is in D3 during + * a sleep transition. We have to leave such controllers in D0. + */ + if (hcd->broken_pci_sleep) { + dev_dbg(dev, "Staying in PCI D0\n"); + return retval; + } + /* If the root hub is dead rather than suspended, disallow remote * wakeup. usb_hc_died() should ensure that both hosts are marked as * dying, so we only need to check the primary roothub. diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 01bb7241d6ef..fe8dc069164e 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd) hcd->has_tt = 1; tdi_reset(ehci); } + if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) { + /* EHCI #1 or #2 on 6 Series/C200 Series chipset */ + if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) { + ehci_info(ehci, "broken D3 during system sleep on ASUS\n"); + hcd->broken_pci_sleep = 1; + device_set_wakeup_capable(&pdev->dev, false); + } + } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { -- cgit v1.2.3 From 840777de530ae96ee9a3022f7ec1d6c65abb26ac Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 24 Apr 2012 16:06:50 -0700 Subject: IB/mad: Set 'D' bit in response for unhandled MADs Commit 0b307043049f ("IB/mad: Return error response for unsupported MADs") does not handle directed-route MADs properly -- it fails to set the 'D' bit in the response MAD status field. This is a problem for SmInfo MADs when the receiver does not have an SM running. Reviewed-by: Hal Rosenstock Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 426bb7617ec6..1c73d8aa4b97 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -1854,6 +1854,8 @@ static bool generate_unmatched_resp(struct ib_mad_private *recv, response->mad.mad.mad_hdr.method = IB_MGMT_METHOD_GET_RESP; response->mad.mad.mad_hdr.status = cpu_to_be16(IB_MGMT_MAD_STATUS_UNSUPPORTED_METHOD_ATTRIB); + if (recv->mad.mad.mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) + response->mad.mad.mad_hdr.status |= IB_SMP_DIRECTION; return true; } else { -- cgit v1.2.3 From a9e7432319eb26ad90f18a7d215e50341d28ecb2 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 24 Apr 2012 16:08:57 -0700 Subject: IB/mad: Don't send response for failed MADs Commit 0b307043049f ("IB/mad: Return error response for unsupported MADs") does not failed MADs (eg those that return IB_MAD_RESULT_FAILURE) properly -- these MADs should be silently discarded. (We should not force the lower-layer drivers to return SUCCESS | CONSUMED in this case, since the MAD is NOT successful). Unsupported MADs are not failures -- they return SUCCESS, but with an "unsupported error" status value inside the response MAD. Reviewed-by: Hal Rosenstock Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 1c73d8aa4b97..b0d0bc8a6fb6 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -1871,6 +1871,7 @@ static void ib_mad_recv_done_handler(struct ib_mad_port_private *port_priv, struct ib_mad_list_head *mad_list; struct ib_mad_agent_private *mad_agent; int port_num; + int ret = IB_MAD_RESULT_SUCCESS; mad_list = (struct ib_mad_list_head *)(unsigned long)wc->wr_id; qp_info = mad_list->mad_queue->qp_info; @@ -1954,8 +1955,6 @@ static void ib_mad_recv_done_handler(struct ib_mad_port_private *port_priv, local: /* Give driver "right of first refusal" on incoming MAD */ if (port_priv->device->process_mad) { - int ret; - ret = port_priv->device->process_mad(port_priv->device, 0, port_priv->port_num, wc, &recv->grh, @@ -1983,7 +1982,8 @@ local: * or via recv_handler in ib_mad_complete_recv() */ recv = NULL; - } else if (generate_unmatched_resp(recv, response)) { + } else if ((ret & IB_MAD_RESULT_SUCCESS) && + generate_unmatched_resp(recv, response)) { agent_send_response(&response->mad.mad, &recv->grh, wc, port_priv->device, port_num, qp_info->qp->qp_num); } -- cgit v1.2.3 From bf6b47deb40f9fc8ddb4573373dc9614aab59d35 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 11 Apr 2012 23:43:29 +0200 Subject: IB/mlx4: Fix memory leaks in ib_link_query_port() If the call to mlx4_MAD_IFC() fails in ib_link_query_port() we will currently do 'return err;' which will leak 'in_mad' and 'out_mad'. We should instead do 'goto out;' where we'll properly free the memory we previously allocated. Signed-off-by: Jesper Juhl Acked-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 75d305629300..cc88c9c955c9 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -247,7 +247,7 @@ static int ib_link_query_port(struct ib_device *ibdev, u8 port, err = mlx4_MAD_IFC(to_mdev(ibdev), 1, 1, port, NULL, NULL, in_mad, out_mad); if (err) - return err; + goto out; /* Checking LinkSpeedActive for FDR-10 */ if (out_mad->data[15] & 0x1) -- cgit v1.2.3 From 569a3aff70e880588fe4b3f1622ac60abbeb4a28 Mon Sep 17 00:00:00 2001 From: Prasanna S Panchamukhi Date: Thu, 19 Apr 2012 17:01:00 +0000 Subject: e1000e: MSI interrupt test failed, using legacy interrupt Following logs where seen on Systems with multiple NICs, while using MSI interrupts as shown below: Feb 16 15:09:32 (none) user.notice kernel: 0000:00:0d.0: lan0_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.notice kernel: 0000:40:0d.0: wan0_1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.notice kernel: 0000:40:0d.0: lan0_1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.warn kernel: 0000:40:0e.0: wan4_0: MSI interrupt test failed, using legacy interrupt. Feb 16 15:09:32 (none) user.notice kernel: 0000:00:0e.0: wan1_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0e.0: lan1_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0f.0: wan2_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0f.0: lan2_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:40:0a.0: wan3_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:40:0a.0: lan3_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0e.0: lan4_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0f.0: wan5_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0f.0: lan5_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX This patch fixes this problem by increasing the msleep from 50 to 100. Signed-off-by: Prasanna S Panchamukhi Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 19ab2154802c..9520a6ac1f30 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3799,7 +3799,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) /* fire an unusual interrupt on the test handler */ ew32(ICS, E1000_ICS_RXSEQ); e1e_flush(); - msleep(50); + msleep(100); e1000_irq_disable(adapter); -- cgit v1.2.3 From 727c356f4d799b53f94cf8fe43e19d64482348c7 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 20 Apr 2012 08:51:45 +0000 Subject: e1000e: Fix default interrupt throttle rate not set in NIC HW Based on the original patch from Ying Cai This change ensures that the itr/itr_setting adjustment logic is used, even for the default/compiled-in value. Context: When we changed the default InterruptThrottleRate value from default (3 = dynamic mode) to 8000 for example, only adapter->itr_setting (which controls interrupt coalescing mode) was set to 8000, but adapter->itr (which controls the value set in NIC register) was not updated accordingly. So from ethtool, it seemed the interrupt throttling is enabled at 8000 intr/s, but the NIC actually was running in dynamic mode which has lower CPU efficiency especially when throughput is not high. CC: Ying Cai CC: David Decotigny Signed-off-by: Jeff Kirsher Tested-by: Aaron Brown --- drivers/net/ethernet/intel/e1000e/param.c | 99 +++++++++++++++++-------------- 1 file changed, 53 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index ff796e42c3eb..16adeb9418a8 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -106,7 +106,7 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); /* * Interrupt Throttle Rate (interrupts/sec) * - * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) + * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative */ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); #define DEFAULT_ITR 3 @@ -344,53 +344,60 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) if (num_InterruptThrottleRate > bd) { adapter->itr = InterruptThrottleRate[bd]; - switch (adapter->itr) { - case 0: - e_info("%s turned off\n", opt.name); - break; - case 1: - e_info("%s set to dynamic mode\n", opt.name); - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - break; - case 3: - e_info("%s set to dynamic conservative mode\n", - opt.name); - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - break; - case 4: - e_info("%s set to simplified (2000-8000 ints) " - "mode\n", opt.name); - adapter->itr_setting = 4; - break; - default: - /* - * Save the setting, because the dynamic bits - * change itr. - */ - if (e1000_validate_option(&adapter->itr, &opt, - adapter) && - (adapter->itr == 3)) { - /* - * In case of invalid user value, - * default to conservative mode. - */ - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - } else { - /* - * Clear the lower two bits because - * they are used as control. - */ - adapter->itr_setting = - adapter->itr & ~3; - } - break; - } + + /* + * Make sure a message is printed for non-special + * values. And in case of an invalid option, display + * warning, use default and got through itr/itr_setting + * adjustment logic below + */ + if ((adapter->itr > 4) && + e1000_validate_option(&adapter->itr, &opt, adapter)) + adapter->itr = opt.def; } else { - adapter->itr_setting = opt.def; + /* + * If no option specified, use default value and go + * through the logic below to adjust itr/itr_setting + */ + adapter->itr = opt.def; + + /* + * Make sure a message is printed for non-special + * default values + */ + if (adapter->itr > 40) + e_info("%s set to default %d\n", opt.name, + adapter->itr); + } + + adapter->itr_setting = adapter->itr; + switch (adapter->itr) { + case 0: + e_info("%s turned off\n", opt.name); + break; + case 1: + e_info("%s set to dynamic mode\n", opt.name); + adapter->itr = 20000; + break; + case 3: + e_info("%s set to dynamic conservative mode\n", + opt.name); adapter->itr = 20000; + break; + case 4: + e_info("%s set to simplified (2000-8000 ints) mode\n", + opt.name); + break; + default: + /* + * Save the setting, because the dynamic bits + * change itr. + * + * Clear the lower two bits because + * they are used as control. + */ + adapter->itr_setting &= ~3; + break; } } { /* Interrupt Mode */ -- cgit v1.2.3 From 93f90e5186053611fe93d889e99ee2852f4da250 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 6 Apr 2012 15:52:51 -0700 Subject: [SCSI] libfc: update mfs boundry checking A previous commit changed the mfs checking to ensure the new mfs is less or equal to the mfs supported by the FCF. This doesn't work for BRDCM cards as they set an mfs of 2048 regardless of whether the switch returns a larger mfs. This patch validates the new mfs against the upper and lower spec defined boundries for a FCoE mfs. Signed-off-by: Vasu Dev Signed-off-by: Bhanu Prakash Gollapudi Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index ef9560dff295..cc83b66d45b7 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1742,17 +1742,19 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK; - if (mfs >= FC_SP_MIN_MAX_PAYLOAD && - mfs <= lport->mfs) { - lport->mfs = mfs; - fc_host_maxframe_size(lport->host) = mfs; - } else { + + if (mfs < FC_SP_MIN_MAX_PAYLOAD || mfs > FC_SP_MAX_MAX_PAYLOAD) { FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, " "lport->mfs:%hu\n", mfs, lport->mfs); fc_lport_error(lport, fp); goto err; } + if (mfs <= lport->mfs) { + lport->mfs = mfs; + fc_host_maxframe_size(lport->host) = mfs; + } + csp_flags = ntohs(flp->fl_csp.sp_features); r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov); e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov); -- cgit v1.2.3 From c847382838ca503b6c55fb599160146221a2c141 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 8 Apr 2012 16:26:19 -0700 Subject: dma: pl330: fix a couple of compilation warnings Move a couple of tests and do a minor refactor to avoid: drivers/dma/pl330.c: In function 'pl330_probe': drivers/dma/pl330.c:2929:215: warning: comparison of distinct pointer types lacks a cast [enabled by default] drivers/dma/pl330.c: In function 'pl330_tasklet': drivers/dma/pl330.c:2250:8: warning: 'pch' may be used uninitialized in this function [-Wuninitialized] drivers/dma/pl330.c:2228:25: note: 'pch' was declared here drivers/dma/pl330.c:2277:130: warning: 'pch' may be used uninitialized in this function [-Wuninitialized] drivers/dma/pl330.c:2260:25: note: 'pch' was declared here Signed-off-by: Olof Johansson Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 282caf118be8..2ee6e23930ad 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2225,12 +2225,9 @@ static inline void free_desc_list(struct list_head *list) { struct dma_pl330_dmac *pdmac; struct dma_pl330_desc *desc; - struct dma_pl330_chan *pch; + struct dma_pl330_chan *pch = NULL; unsigned long flags; - if (list_empty(list)) - return; - /* Finish off the work list */ list_for_each_entry(desc, list, node) { dma_async_tx_callback callback; @@ -2247,6 +2244,10 @@ static inline void free_desc_list(struct list_head *list) desc->pchan = NULL; } + /* pch will be unset if list was empty */ + if (!pch) + return; + pdmac = pch->dmac; spin_lock_irqsave(&pdmac->pool_lock, flags); @@ -2257,12 +2258,9 @@ static inline void free_desc_list(struct list_head *list) static inline void handle_cyclic_desc_list(struct list_head *list) { struct dma_pl330_desc *desc; - struct dma_pl330_chan *pch; + struct dma_pl330_chan *pch = NULL; unsigned long flags; - if (list_empty(list)) - return; - list_for_each_entry(desc, list, node) { dma_async_tx_callback callback; @@ -2274,6 +2272,10 @@ static inline void handle_cyclic_desc_list(struct list_head *list) callback(desc->txd.callback_param); } + /* pch will be unset if list was empty */ + if (!pch) + return; + spin_lock_irqsave(&pch->lock, flags); list_splice_tail_init(list, &pch->work_list); spin_unlock_irqrestore(&pch->lock, flags); @@ -2926,8 +2928,11 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) INIT_LIST_HEAD(&pd->channels); /* Initialize channel parameters */ - num_chan = max(pdat ? pdat->nr_valid_peri : (u8)pi->pcfg.num_peri, - (u8)pi->pcfg.num_chan); + if (pdat) + num_chan = max_t(int, pdat->nr_valid_peri, pi->pcfg.num_chan); + else + num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan); + pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL); for (i = 0; i < num_chan; i++) { -- cgit v1.2.3 From 88c08a3fba9954ce0ec3e1eab07c498a419ad7e3 Mon Sep 17 00:00:00 2001 From: Davide Ciminaghi Date: Thu, 19 Apr 2012 12:20:24 +0200 Subject: dmaengine/amba-pl08x : reset phychan_hold on terminate all When a client calls pl08x_control with DMA_TERMINATE_ALL, it is correct to terminate and release the phy channel currently in use (if one is in use), but the phychan_hold counter must also be reset (otherwise it could get trapped in an unbalanced state). Signed-off-by: Davide Ciminaghi Reviewed-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index c301a8ec31aa..3d704abd7912 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1429,6 +1429,7 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * signal */ release_phy_channel(plchan); + plchan->phychan_hold = 0; } /* Dequeue jobs and free LLIs */ if (plchan->at) { -- cgit v1.2.3 From da3a9e9e7b8341cfc939818103cb7ef9f5293de2 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Wed, 25 Apr 2012 04:49:20 +0000 Subject: tlan: add cast needed for proper 64 bit operation Changes this beauty into a statement that actually has an effect on amd64. Tested-by: Per Jessen Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/tlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c index 817ad3bc4957..efd36691ce54 100644 --- a/drivers/net/ethernet/ti/tlan.c +++ b/drivers/net/ethernet/ti/tlan.c @@ -228,7 +228,7 @@ tlan_get_skb(const struct tlan_list *tag) unsigned long addr; addr = tag->buffer[9].address; - addr |= (tag->buffer[8].address << 16) << 16; + addr |= ((unsigned long) tag->buffer[8].address << 16) << 16; return (struct sk_buff *) addr; } -- cgit v1.2.3 From f891ea1634ce41f5f47ae40d8594809f4cd2ca66 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 24 Apr 2012 13:37:01 +0000 Subject: tg3: Avoid panic from reserved statblk field access When RSS is enabled, interrupt vector 0 does not receive any rx traffic. The rx producer index fields for vector 0's status block should be considered reserved in this case. This patch changes the code to respect these reserved fields, which avoids a kernel panic when these fields take on non-zero values. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 062ac333fde6..ceeab8e852ef 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -879,8 +879,13 @@ static inline unsigned int tg3_has_work(struct tg3_napi *tnapi) if (sblk->status & SD_STATUS_LINK_CHG) work_exists = 1; } - /* check for RX/TX work to do */ - if (sblk->idx[0].tx_consumer != tnapi->tx_cons || + + /* check for TX work to do */ + if (sblk->idx[0].tx_consumer != tnapi->tx_cons) + work_exists = 1; + + /* check for RX work to do */ + if (tnapi->rx_rcb_prod_idx && *(tnapi->rx_rcb_prod_idx) != tnapi->rx_rcb_ptr) work_exists = 1; @@ -6124,6 +6129,9 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget) return work_done; } + if (!tnapi->rx_rcb_prod_idx) + return work_done; + /* run RX thread, within the bounds set by NAPI. * All RX "locking" is done by ensuring outside * code synchronizes with tg3->napi.poll() @@ -7567,6 +7575,12 @@ static int tg3_alloc_consistent(struct tg3 *tp) */ switch (i) { default: + if (tg3_flag(tp, ENABLE_RSS)) { + tnapi->rx_rcb_prod_idx = NULL; + break; + } + /* Fall through */ + case 1: tnapi->rx_rcb_prod_idx = &sblk->idx[0].rx_producer; break; case 2: -- cgit v1.2.3 From c95eeae9e39314273bcda057f27100603d333518 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 5 Apr 2012 16:15:24 +0200 Subject: i2c: mxs: handle spurious interrupt After an error interrupt setting cmd->err, I see another interrupt that the data engine is empty which clears cmd->err before being processed. So, clear cmd->err at the beginning of a transfer only to handle these consecutive interrupts. Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 3d471d56bf15..4c37347973e6 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -227,6 +227,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, return -EINVAL; init_completion(&i2c->cmd_complete); + i2c->cmd_err = 0; flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; @@ -299,8 +300,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) MXS_I2C_CTRL1_SLAVE_STOP_IRQ | MXS_I2C_CTRL1_SLAVE_IRQ)) /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */ i2c->cmd_err = -EIO; - else - i2c->cmd_err = 0; is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; -- cgit v1.2.3 From e39a9ba2889edbfbda4a9336ea718b2e25a9c2b2 Mon Sep 17 00:00:00 2001 From: Clay Carpenter Date: Wed, 25 Apr 2012 16:01:49 -0700 Subject: acerhdf: add support for Aspire 1410 BIOS v1.3314 Add support for Aspire 1410 BIOS v1.3314. Fixes the following error: acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1410/v1.3314, please report, aborting! Signed-off-by: Clay Carpenter Signed-off-by: Peter Feuerer Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/acerhdf.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index bc8384c6f3eb..9a1934964977 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -161,6 +161,7 @@ static const struct bios_settings_t bios_tbl[] = { {"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1410", "v1.3308", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1410", "v1.3310", 0x55, 0x58, {0x9e, 0x00} }, + {"Acer", "Aspire 1410", "v1.3314", 0x55, 0x58, {0x9e, 0x00} }, /* Acer 1810xx */ {"Acer", "Aspire 1810TZ", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1810T", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, -- cgit v1.2.3 From 43ae1e32e0b540fa04f059b7aa3b4f5cf49fc9ad Mon Sep 17 00:00:00 2001 From: Peter Feuerer Date: Wed, 25 Apr 2012 16:01:49 -0700 Subject: acerhdf: add support for new hardware Add support for new hardware: Acer Aspire LT-10Q/531/751/1810/1825, Acer Travelmate 7730, Packard Bell ENBFT/DOTVR46 Signed-off-by: Peter Feuerer Acked-by: Borislav Petkov Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/acerhdf.c | 62 ++++++++++++++++++++++++++++-------------- 1 file changed, 42 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 9a1934964977..c697d807ea0d 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -50,7 +50,7 @@ */ #undef START_IN_KERNEL_MODE -#define DRV_VER "0.5.24" +#define DRV_VER "0.5.26" /* * According to the Atom N270 datasheet, @@ -150,6 +150,8 @@ static const struct bios_settings_t bios_tbl[] = { {"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00} }, {"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00} }, {"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00} }, + /* LT1005u */ + {"Acer", "LT-10Q", "v0.3310", 0x55, 0x58, {0x20, 0x00} }, /* Acer 1410 */ {"Acer", "Aspire 1410", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1410", "v0.3113", 0x55, 0x58, {0x9e, 0x00} }, @@ -184,29 +186,44 @@ static const struct bios_settings_t bios_tbl[] = { {"Acer", "Aspire 1810TZ", "v1.3310", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1810T", "v1.3310", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1810TZ", "v1.3314", 0x55, 0x58, {0x9e, 0x00} }, + {"Acer", "Aspire 1810T", "v1.3314", 0x55, 0x58, {0x9e, 0x00} }, /* Acer 531 */ + {"Acer", "AO531h", "v0.3104", 0x55, 0x58, {0x20, 0x00} }, {"Acer", "AO531h", "v0.3201", 0x55, 0x58, {0x20, 0x00} }, + {"Acer", "AO531h", "v0.3304", 0x55, 0x58, {0x20, 0x00} }, + /* Acer 751 */ + {"Acer", "AO751h", "V0.3212", 0x55, 0x58, {0x21, 0x00} }, + /* Acer 1825 */ + {"Acer", "Aspire 1825PTZ", "V1.3118", 0x55, 0x58, {0x9e, 0x00} }, + {"Acer", "Aspire 1825PTZ", "V1.3127", 0x55, 0x58, {0x9e, 0x00} }, + /* Acer TravelMate 7730 */ + {"Acer", "TravelMate 7730G", "v0.3509", 0x55, 0x58, {0xaf, 0x00} }, /* Gateway */ - {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} }, - {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} }, - {"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x9e, 0x00} }, - {"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, - {"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} }, + {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} }, + {"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "LT31", "v1.3303t", 0x55, 0x58, {0x9e, 0x00} }, /* Packard Bell */ - {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} }, - {"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, - {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} }, - {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, - {"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3113", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3115", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3117", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3119", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v1.3204", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMA", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMA", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} }, + {"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, + {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} }, + {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, + {"Packard Bell", "ENBFT", "V1.3118", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "ENBFT", "V1.3127", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3113", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3115", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3117", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3119", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v1.3204", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMA", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMA", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMA", "v1.3303t", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTVR46", "v1.3308", 0x55, 0x58, {0x9e, 0x00} }, /* pewpew-terminator */ {"", "", "", 0, 0, {0, 0} } }; @@ -702,15 +719,20 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Peter Feuerer"); MODULE_DESCRIPTION("Aspire One temperature and fan driver"); MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAO751h*:"); MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1410*:"); MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1810*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1825PTZ:"); MODULE_ALIAS("dmi:*:*Acer*:pnAO531*:"); +MODULE_ALIAS("dmi:*:*Acer*:TravelMate*7730G:"); MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:"); MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnAOA*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOA*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMU*:"); +MODULE_ALIAS("dmi:*:*Packard*Bell*:pnENBFT*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMA*:"); +MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTVR46*:"); module_init(acerhdf_init); module_exit(acerhdf_exit); -- cgit v1.2.3 From 351963bb58af5717359544087b9f634c27b9b155 Mon Sep 17 00:00:00 2001 From: Peter Feuerer Date: Wed, 25 Apr 2012 16:01:49 -0700 Subject: acerhdf: lowered default temp fanon/fanoff values Due to new supported hardware, of which the actual temperature limits of processor, harddisk and other components are unknown, it feels safer with lower fanon / fanoff settings. It won't change much for most people, already using acerhdf, as they use their own fanon/fanoff variable settings when loading the module. Furthermore seems like kernel and userspace tools have been improved to work more efficient and netbooks don't get so hot anymore. Signed-off-by: Peter Feuerer Acked-by: Borislav Petkov Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/acerhdf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index c697d807ea0d..639db4d0aa76 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -83,8 +83,8 @@ static int kernelmode; #endif static unsigned int interval = 10; -static unsigned int fanon = 63000; -static unsigned int fanoff = 58000; +static unsigned int fanon = 60000; +static unsigned int fanoff = 53000; static unsigned int verbose; static unsigned int fanstate = ACERHDF_FAN_AUTO; static char force_bios[16]; -- cgit v1.2.3 From 3f5ec5e06d6ca88168277247dbac0ec7b501600f Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Wed, 25 Apr 2012 16:01:51 -0700 Subject: drivers/rtc/rtc-ds1307.c: fix BUG shown with lock debugging enabled Add struct bin_attribute initialization to fix the following bug: rtc-ds1307 3-0068: rtc core: registered ds1307 as rtc0 BUG: key cfb14fcc not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2986 sysfs_add_file_mode+0x84/0xdc() Modules linked in: [] (unwind_backtrace+0x0/0xf8) from [] (warn_slowpath_common+0x4c/0x64) [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null+0x1c/0x24) from [] (sysfs_add_file_mode+0x84/0xdc) [] (sysfs_add_file_mode+0x84/0xdc) from [] (ds1307_probe+0x5e4/0x6ac) [] (ds1307_probe+0x5e4/0x6ac) from [] (i2c_device_probe+0xdc/0x108) [] (i2c_device_probe+0xdc/0x108) from [] (driver_probe_device+0x90/0x210) [] (driver_probe_device+0x90/0x210) from [] (__driver_attach+0x94/0x98) [] (__driver_attach+0x94/0x98) from [] (bus_for_each_dev+0x50/0x7c) [] (bus_for_each_dev+0x50/0x7c) from [] (bus_add_driver+0x184/0x244) [] (bus_add_driver+0x184/0x244) from [] (driver_register+0x78/0x12c) [] (driver_register+0x78/0x12c) from [] (i2c_register_driver+0x2c/0xb4) [] (i2c_register_driver+0x2c/0xb4) from [] (do_one_initcall+0x34/0x178) [] (do_one_initcall+0x34/0x178) from [] (kernel_init+0xdc/0x194) [] (kernel_init+0xdc/0x194) from [] (kernel_thread_exit+0x0/0x8) Since commit 6992f5334995af4 ("sysfs: Use one lockdep class per sysfs attribute") this initialization is required. Reported-by: Stefano Babic Tested-by: Stefano Babic Signed-off-by: Anatolij Gustschin Cc: Alessandro Zummo Cc: Stefano Babic Cc: Eric W. Biederman Cc: Greg Kroah-Hartman Acked-by: Wolfram Sang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds1307.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index cd188ab72f79..c293d0cdb104 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -902,6 +902,7 @@ read_rtc: } ds1307->nvram->attr.name = "nvram"; ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR; + sysfs_bin_attr_init(ds1307->nvram); ds1307->nvram->read = ds1307_nvram_read, ds1307->nvram->write = ds1307_nvram_write, ds1307->nvram->size = chip->nvram_size; -- cgit v1.2.3 From 5d384574e8bceb9bada323da8044ca43e621886b Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 25 Apr 2012 07:32:11 +0000 Subject: ehea: fix allmulticast support There was a bug in the mask of regtype parameter for registering a multicast filter. It was ignoring the scope bit, which was wrongly being used for all filters. The SCOPE_ALL value adds a filter that allows all multicast packets and ignores the MAC parameter, just what allmulticast needs. The normals filters, however, should not use SCOPE_ALL. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 24 +++++++++++++++--------- drivers/net/ethernet/ibm/ehea/ehea_phyp.h | 2 +- 2 files changed, 16 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index acf34b671547..9dcb5fd37371 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -290,16 +290,18 @@ static void ehea_update_bcmc_registrations(void) arr[i].adh = adapter->handle; arr[i].port_id = port->logical_port_id; - arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | - EHEA_BCMC_MULTICAST | + arr[i].reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_UNTAGGED; + if (mc_entry->macaddr == 0) + arr[i].reg_type |= EHEA_BCMC_SCOPE_ALL; arr[i++].macaddr = mc_entry->macaddr; arr[i].adh = adapter->handle; arr[i].port_id = port->logical_port_id; - arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | - EHEA_BCMC_MULTICAST | + arr[i].reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_VLANID_ALL; + if (mc_entry->macaddr == 0) + arr[i].reg_type |= EHEA_BCMC_SCOPE_ALL; arr[i++].macaddr = mc_entry->macaddr; num_registrations -= 2; } @@ -1838,8 +1840,9 @@ static u64 ehea_multicast_reg_helper(struct ehea_port *port, u64 mc_mac_addr, u64 hret; u8 reg_type; - reg_type = EHEA_BCMC_SCOPE_ALL | EHEA_BCMC_MULTICAST - | EHEA_BCMC_UNTAGGED; + reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_UNTAGGED; + if (mc_mac_addr == 0) + reg_type |= EHEA_BCMC_SCOPE_ALL; hret = ehea_h_reg_dereg_bcmc(port->adapter->handle, port->logical_port_id, @@ -1847,8 +1850,9 @@ static u64 ehea_multicast_reg_helper(struct ehea_port *port, u64 mc_mac_addr, if (hret) goto out; - reg_type = EHEA_BCMC_SCOPE_ALL | EHEA_BCMC_MULTICAST - | EHEA_BCMC_VLANID_ALL; + reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_VLANID_ALL; + if (mc_mac_addr == 0) + reg_type |= EHEA_BCMC_SCOPE_ALL; hret = ehea_h_reg_dereg_bcmc(port->adapter->handle, port->logical_port_id, @@ -1898,7 +1902,7 @@ static void ehea_allmulti(struct net_device *dev, int enable) netdev_err(dev, "failed enabling IFF_ALLMULTI\n"); } - } else + } else { if (!enable) { /* Disable ALLMULTI */ hret = ehea_multicast_reg_helper(port, 0, H_DEREG_BCMC); @@ -1908,6 +1912,7 @@ static void ehea_allmulti(struct net_device *dev, int enable) netdev_err(dev, "failed disabling IFF_ALLMULTI\n"); } + } } static void ehea_add_multicast_entry(struct ehea_port *port, u8 *mc_mac_addr) @@ -2463,6 +2468,7 @@ static int ehea_down(struct net_device *dev) return 0; ehea_drop_multicast_list(dev); + ehea_allmulti(dev, 0); ehea_broadcast_reg_helper(port, H_DEREG_BCMC); ehea_free_interrupts(dev); diff --git a/drivers/net/ethernet/ibm/ehea/ehea_phyp.h b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h index 52c456ec4d6c..8364815c32ff 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_phyp.h +++ b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h @@ -450,7 +450,7 @@ u64 ehea_h_modify_ehea_port(const u64 adapter_handle, const u16 port_num, void *cb_addr); #define H_REGBCMC_PN EHEA_BMASK_IBM(48, 63) -#define H_REGBCMC_REGTYPE EHEA_BMASK_IBM(61, 63) +#define H_REGBCMC_REGTYPE EHEA_BMASK_IBM(60, 63) #define H_REGBCMC_MACADDR EHEA_BMASK_IBM(16, 63) #define H_REGBCMC_VLANID EHEA_BMASK_IBM(52, 63) -- cgit v1.2.3 From 47d59d01322f60d1c46fdf2650e0613daa8ce637 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 25 Apr 2012 07:32:12 +0000 Subject: ehea: fix promiscuous mode commit a4910b744486254cfa61995954c118fb2283c4fd has broken promiscuous mode, which is never set. port->promisc just reflects the last setting of PROMISCUOUS mode to avoid doing an extra hypercall when it's already set. However, since it may fail because of hypervisor permissions, we should still respect the multicast settings and not simply exit after setting promiscuous mode. Signed-off-by: Thadeu Lima de Souza Cascardo Cc: Breno Leitao Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 9dcb5fd37371..c9069a28832b 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -1946,11 +1946,7 @@ static void ehea_set_multicast_list(struct net_device *dev) struct netdev_hw_addr *ha; int ret; - if (port->promisc) { - ehea_promiscuous(dev, 1); - return; - } - ehea_promiscuous(dev, 0); + ehea_promiscuous(dev, !!(dev->flags & IFF_PROMISC)); if (dev->flags & IFF_ALLMULTI) { ehea_allmulti(dev, 1); -- cgit v1.2.3 From 1bb57e940e1958e40d51f2078f50c3a96a9b2d75 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Wed, 25 Apr 2012 14:32:09 +0000 Subject: dl2k: Clean up rio_ioctl The dl2k driver's rio_ioctl call has a few issues: - No permissions checking - Implements SIOCGMIIREG and SIOCGMIIREG using the SIOCDEVPRIVATE numbers - Has a few ioctls that may have been used for debugging at one point but have no place in the kernel proper. This patch removes all but the MII ioctls, renumbers them to use the standard ones, and adds the proper permission check for SIOCSMIIREG. We can also get rid of the dl2k-specific struct mii_data in favor of the generic struct mii_ioctl_data. Since we have the phyid on hand, we can add the SIOCGMIIPHY ioctl too. Most of the MII code for the driver could probably be converted to use the generic MII library but I don't have a device to test the results. Reported-by: Stephan Mueller Signed-off-by: Jeff Mahoney Signed-off-by: David S. Miller --- drivers/net/ethernet/dlink/dl2k.c | 52 +++++++-------------------------------- drivers/net/ethernet/dlink/dl2k.h | 7 ------ 2 files changed, 9 insertions(+), 50 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c index b2dc2c81a147..2e09edb9cdf8 100644 --- a/drivers/net/ethernet/dlink/dl2k.c +++ b/drivers/net/ethernet/dlink/dl2k.c @@ -1259,55 +1259,21 @@ rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) { int phy_addr; struct netdev_private *np = netdev_priv(dev); - struct mii_data *miidata = (struct mii_data *) &rq->ifr_ifru; - - struct netdev_desc *desc; - int i; + struct mii_ioctl_data *miidata = if_mii(rq); phy_addr = np->phy_addr; switch (cmd) { - case SIOCDEVPRIVATE: - break; - - case SIOCDEVPRIVATE + 1: - miidata->out_value = mii_read (dev, phy_addr, miidata->reg_num); + case SIOCGMIIPHY: + miidata->phy_id = phy_addr; break; - case SIOCDEVPRIVATE + 2: - mii_write (dev, phy_addr, miidata->reg_num, miidata->in_value); + case SIOCGMIIREG: + miidata->val_out = mii_read (dev, phy_addr, miidata->reg_num); break; - case SIOCDEVPRIVATE + 3: - break; - case SIOCDEVPRIVATE + 4: - break; - case SIOCDEVPRIVATE + 5: - netif_stop_queue (dev); + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + mii_write (dev, phy_addr, miidata->reg_num, miidata->val_in); break; - case SIOCDEVPRIVATE + 6: - netif_wake_queue (dev); - break; - case SIOCDEVPRIVATE + 7: - printk - ("tx_full=%x cur_tx=%lx old_tx=%lx cur_rx=%lx old_rx=%lx\n", - netif_queue_stopped(dev), np->cur_tx, np->old_tx, np->cur_rx, - np->old_rx); - break; - case SIOCDEVPRIVATE + 8: - printk("TX ring:\n"); - for (i = 0; i < TX_RING_SIZE; i++) { - desc = &np->tx_ring[i]; - printk - ("%02x:cur:%08x next:%08x status:%08x frag1:%08x frag0:%08x", - i, - (u32) (np->tx_ring_dma + i * sizeof (*desc)), - (u32)le64_to_cpu(desc->next_desc), - (u32)le64_to_cpu(desc->status), - (u32)(le64_to_cpu(desc->fraginfo) >> 32), - (u32)le64_to_cpu(desc->fraginfo)); - printk ("\n"); - } - printk ("\n"); - break; - default: return -EOPNOTSUPP; } diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h index ba0adcafa55a..30c2da3de548 100644 --- a/drivers/net/ethernet/dlink/dl2k.h +++ b/drivers/net/ethernet/dlink/dl2k.h @@ -365,13 +365,6 @@ struct ioctl_data { char *data; }; -struct mii_data { - __u16 reserved; - __u16 reg_num; - __u16 in_value; - __u16 out_value; -}; - /* The Rx and Tx buffer descriptors. */ struct netdev_desc { __le64 next_desc; -- cgit v1.2.3 From 07d69d4238418746a7b85c5d05ec17c658a2a390 Mon Sep 17 00:00:00 2001 From: Paolo Pisati Date: Mon, 23 Apr 2012 04:05:20 +0000 Subject: smsc95xx: mark link down on startup and let PHY interrupt deal with carrier changes Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Tested on my Beagle XM. v2: added mantainer to the list of recipient Signed-off-by: Paolo Pisati Acked-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 53a1ba5e0c2c..94ae66999f59 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1192,7 +1192,7 @@ static const struct driver_info smsc95xx_info = { .rx_fixup = smsc95xx_rx_fixup, .tx_fixup = smsc95xx_tx_fixup, .status = smsc95xx_status, - .flags = FLAG_ETHER | FLAG_SEND_ZLP, + .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, }; static const struct usb_device_id products[] = { -- cgit v1.2.3 From d08c9a33b4aa6665b0ee3c4d1b57715fa0eae2a2 Mon Sep 17 00:00:00 2001 From: "Mingarelli, Thomas" Date: Tue, 3 Apr 2012 05:37:01 +0000 Subject: hpwdt: Only BYTE reads/writes to WD Timer port 0x72 This patch is to correct the use of the iLO port 0x72 usage. The port 0x72 is a byte size write/read and hpwdt is currently writing a WORD. Signed-off by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index cbc7ceef2786..9f13b897fd64 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -435,16 +435,16 @@ static void hpwdt_start(void) { reload = SECS_TO_TICKS(soft_margin); iowrite16(reload, hpwdt_timer_reg); - iowrite16(0x85, hpwdt_timer_con); + iowrite8(0x85, hpwdt_timer_con); } static void hpwdt_stop(void) { unsigned long data; - data = ioread16(hpwdt_timer_con); + data = ioread8(hpwdt_timer_con); data &= 0xFE; - iowrite16(data, hpwdt_timer_con); + iowrite8(data, hpwdt_timer_con); } static void hpwdt_ping(void) -- cgit v1.2.3 From c3e40a9972428d6e2d8e287ed0233a57a218c30f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 25 Apr 2012 13:44:20 -0700 Subject: hwmon: (fam15h_power) Fix pci_device_id array pci_match_id() takes an *array* of IDs which must be properly zero- terminated. Reported-by: Ben Hutchings Cc: stable@vger.kernel.org # 3.0+: 00250ec hwmon: fam15h_power: fix bogus values Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- drivers/hwmon/fam15h_power.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index 37a8fc92b44a..e8e18cab1fb8 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -128,17 +128,20 @@ static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4) * counter saturations resulting in bogus power readings. * We correct this value ourselves to cope with older BIOSes. */ +static DEFINE_PCI_DEVICE_TABLE(affected_device) = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, + { 0 } +}; + static void __devinit tweak_runavg_range(struct pci_dev *pdev) { u32 val; - const struct pci_device_id affected_device = { - PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }; /* * let this quirk apply only to the current version of the * northbridge, since future versions may change the behavior */ - if (!pci_match_id(&affected_device, pdev)) + if (!pci_match_id(affected_device, pdev)) return; pci_bus_read_config_dword(pdev->bus, -- cgit v1.2.3 From 6651819b4b4fc3caa6964c5d825eb4bb996f3905 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 1 Apr 2012 19:16:18 +0200 Subject: drm/i915: handle input/output sdvo timings separately in mode_set We seem to have a decent confusion between the output timings and the input timings of the sdvo encoder. If I understand the code correctly, we use the original mode unchanged for the output timings, safe for the lvds case. And we should use the adjusted mode for input timings. Clarify the situation by adding an explicit output_dtd to the sdvo mode_set function and streamline the code-flow by moving the input and output mode setting in the sdvo encode together. Furthermore testing showed that the sdvo input timing needs the unadjusted dotclock, the sdvo chip will automatically compute the required pixel multiplier to get a dotclock above 100 MHz. Fix this up when converting a drm mode to an sdvo dtd. This regression was introduced in commit c74696b9c890074c1e1ee3d7496fc71eb3680ced Author: Pavel Roskin Date: Thu Sep 2 14:46:34 2010 -0400 i915: revert some checks added by commit 32aad86f particularly the following hunk: diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 093e914..62d22ae 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1122,11 +1123,9 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, /* We have tried to get input timing in mode_fixup, and filled into adjusted_mode */ - if (intel_sdvo->is_tv || intel_sdvo->is_lvds) { - intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); + intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); + if (intel_sdvo->is_tv || intel_sdvo->is_lvds) input_dtd.part2.sdvo_flags = intel_sdvo->sdvo_flags; - } else - intel_sdvo_get_dtd_from_mode(&input_dtd, mode); /* If it's a TV, we already set the output timing in mode_fixup. * Otherwise, the output timing is equal to the input timing. Due to questions raised in review, below a more elaborate analysis of the bug at hand: Sdvo seems to have two timings, one is the output timing which will be sent over whatever is connected on the other side of the sdvo chip (panel, hdmi screen, tv), the other is the input timing which will be generated by the gmch pipe. It looks like sdvo is expected to scale between the two. To make things slightly more complicated, we have a bunch of special cases: - For lvds panel we always use a fixed output timing, namely intel_sdvo->sdvo_lvds_fixed_mode, hence that special case. - Sdvo has an interface to generate a preferred input timing for a given output timing. This is the confusing thing that I've tried to clear up with the follow-on patches. - A special requirement is that the input pixel clock needs to be between 100MHz and 200MHz (likely to keep it within the electromechanical design range of PCIe), 270MHz on later gen4+. Lower pixel clocks are doubled/quadrupled. The thing this patch tries to fix is that the pipe needs to be explicitly instructed to double/quadruple the pixels and needs the correspondingly higher pixel clock, whereas the sdvo adaptor seems to do that itself and needs the unadjusted pixel clock. For the sdvo encode side we already set the pixel mutliplier with a different command (0x21). This patch tries to fix this mess by: - Keeping the output mode timing in the unadjusted plain mode, safe for the lvds case. - Storing the input timing in the adjusted_mode with the adjusted pixel clock. This way we don't need to frob around with the core crtc mode set code. - Fixing up the pixelclock when constructing the sdvo dtd timing struct. This is why the first hunk of the patch is an integral part of the series. - Dropping the is_tv special case because input_dtd is equivalent to adjusted_mode after these changes. Follow-up patches clear this up further (by simply ripping out intel_sdvo->input_dtd because it's not needed). v2: Extend commit message with an in-depth bug analysis. Reported-and-Tested-by: Bernard Blackham Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48157 Reviewed-by: Jesse Barnes Cc: stable@kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index e36b171c1e7d..232d77d07d8b 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -731,6 +731,7 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd, uint16_t width, height; uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len; uint16_t h_sync_offset, v_sync_offset; + int mode_clock; width = mode->crtc_hdisplay; height = mode->crtc_vdisplay; @@ -745,7 +746,11 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd, h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; - dtd->part1.clock = mode->clock / 10; + mode_clock = mode->clock; + mode_clock /= intel_mode_get_pixel_multiplier(mode) ?: 1; + mode_clock /= 10; + dtd->part1.clock = mode_clock; + dtd->part1.h_active = width & 0xff; dtd->part1.h_blank = h_blank_len & 0xff; dtd->part1.h_high = (((width >> 8) & 0xf) << 4) | @@ -996,7 +1001,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder); u32 sdvox; struct intel_sdvo_in_out_map in_out; - struct intel_sdvo_dtd input_dtd; + struct intel_sdvo_dtd input_dtd, output_dtd; int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); int rate; @@ -1021,20 +1026,13 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, intel_sdvo->attached_output)) return; - /* We have tried to get input timing in mode_fixup, and filled into - * adjusted_mode. - */ - if (intel_sdvo->is_tv || intel_sdvo->is_lvds) { - input_dtd = intel_sdvo->input_dtd; - } else { - /* Set the output timing to the screen */ - if (!intel_sdvo_set_target_output(intel_sdvo, - intel_sdvo->attached_output)) - return; - - intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); - (void) intel_sdvo_set_output_timing(intel_sdvo, &input_dtd); - } + /* lvds has a special fixed output timing. */ + if (intel_sdvo->is_lvds) + intel_sdvo_get_dtd_from_mode(&output_dtd, + intel_sdvo->sdvo_lvds_fixed_mode); + else + intel_sdvo_get_dtd_from_mode(&output_dtd, mode); + (void) intel_sdvo_set_output_timing(intel_sdvo, &output_dtd); /* Set the input timing to the screen. Assume always input 0. */ if (!intel_sdvo_set_target_input(intel_sdvo)) @@ -1052,6 +1050,10 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, !intel_sdvo_set_tv_format(intel_sdvo)) return; + /* We have tried to get input timing in mode_fixup, and filled into + * adjusted_mode. + */ + intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); (void) intel_sdvo_set_input_timing(intel_sdvo, &input_dtd); switch (pixel_multiplier) { -- cgit v1.2.3 From cd0a2bfb77a3edeecd652081e0b1a163d3b0696b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 17:17:19 -0400 Subject: pci: frv architecture needs generic setup-bus infrastructure Otherwise we get this link failure for frv's defconfig: LD .tmp_vmlinux1 drivers/built-in.o: In function `pci_assign_resource': (.text+0xbf0c): undefined reference to `pci_cardbus_resource_alignment' drivers/built-in.o: In function `pci_setup': pci.c:(.init.text+0x174): undefined reference to `pci_realloc_get_opt' pci.c:(.init.text+0x1a0): undefined reference to `pci_realloc_get_opt' make[1]: *** [.tmp_vmlinux1] Error 1 Cc: David Howells Acked-by: Bjorn Helgaas Signed-off-by: Paul Gortmaker --- drivers/pci/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 083a49fee56a..165274c064bc 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_UNICORE32) += setup-bus.o setup-irq.o obj-$(CONFIG_PARISC) += setup-bus.o obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o obj-$(CONFIG_PPC) += setup-bus.o +obj-$(CONFIG_FRV) += setup-bus.o obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o obj-$(CONFIG_X86_VISWS) += setup-irq.o obj-$(CONFIG_MN10300) += setup-bus.o -- cgit v1.2.3 From bc856a62c8036330cb2d95e24756285c6d8ecba2 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 22:32:24 -0400 Subject: blackfin: fix compile error in bfin-lq035q1-fb.c This file has an implicit dependency on GPIO stuff, showing up as the following build failure: drivers/video/bfin-lq035q1-fb.c:369:6: error: 'GPIOF_OUT_INIT_LOW' undeclared Other more global bfin build issues prevent an automated bisect, but it really doesn't matter - simply add in the appropriate header. Cc: Florian Tobias Schandinat Acked-by: Mike Frysinger Signed-off-by: Paul Gortmaker --- drivers/video/bfin-lq035q1-fb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c index 86922ac84412..353c02fe8a95 100644 --- a/drivers/video/bfin-lq035q1-fb.c +++ b/drivers/video/bfin-lq035q1-fb.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 89f21cc050d5eed8eeffee5b46297fb7a74ef9dd Mon Sep 17 00:00:00 2001 From: Rupesh Gujare Date: Wed, 25 Apr 2012 23:54:58 +0100 Subject: staging: ozwpan: Fix bug where kfree is called twice. Signed-off-by: Rupesh Gujare Signed-off-by: Chris Kelly Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ozwpan/ozpd.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/ozwpan/ozpd.c b/drivers/staging/ozwpan/ozpd.c index 2b45d3d1800c..04cd57f2a6da 100644 --- a/drivers/staging/ozwpan/ozpd.c +++ b/drivers/staging/ozwpan/ozpd.c @@ -383,8 +383,6 @@ static void oz_tx_frame_free(struct oz_pd *pd, struct oz_tx_frame *f) pd->tx_pool = &f->link; pd->tx_pool_count++; f = 0; - } else { - kfree(f); } spin_unlock_bh(&pd->tx_frame_lock); if (f) -- cgit v1.2.3 From 521394e4e679996955bc351cb6b64639751db2ff Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 25 Apr 2012 16:11:38 +0100 Subject: xen: use the pirq number to check the pirq_eoi_map In pirq_check_eoi_map use the pirq number rather than the Linux irq number to check whether an eoi is needed in the pirq_eoi_map. The reason is that the irq number is not always identical to the pirq number so if we wrongly use the irq number to check the pirq_eoi_map we are going to check for the wrong pirq to EOI. As a consequence some interrupts might not be EOI'ed by the guest correctly. Signed-off-by: Stefano Stabellini Tested-by: Tobias Geiger [v1: Added some extra wording to git commit] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/events.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 4b33acd8ed4e..0a8a17cd80be 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -274,7 +274,7 @@ static unsigned int cpu_from_evtchn(unsigned int evtchn) static bool pirq_check_eoi_map(unsigned irq) { - return test_bit(irq, pirq_eoi_map); + return test_bit(pirq_from_irq(irq), pirq_eoi_map); } static bool pirq_needs_eoi_flag(unsigned irq) -- cgit v1.2.3 From 5c22837adca7c30b66121cf18ad3e160134268d4 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 26 Apr 2012 21:59:10 +0200 Subject: USB: cdc-wdm: fix race leading leading to memory corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes a race whereby a pointer to a buffer would be overwritten while the buffer was in use leading to a double free and a memory leak. This causes crashes. This bug was introduced in 2.6.34 Signed-off-by: Oliver Neukum Tested-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index c6f6560d436c..0bb2b3248dad 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -157,8 +157,9 @@ static void wdm_out_callback(struct urb *urb) spin_lock(&desc->iuspin); desc->werr = urb->status; spin_unlock(&desc->iuspin); - clear_bit(WDM_IN_USE, &desc->flags); kfree(desc->outbuf); + desc->outbuf = NULL; + clear_bit(WDM_IN_USE, &desc->flags); wake_up(&desc->wait); } @@ -338,7 +339,7 @@ static ssize_t wdm_write if (we < 0) return -EIO; - desc->outbuf = buf = kmalloc(count, GFP_KERNEL); + buf = kmalloc(count, GFP_KERNEL); if (!buf) { rv = -ENOMEM; goto outnl; @@ -406,10 +407,12 @@ static ssize_t wdm_write req->wIndex = desc->inum; req->wLength = cpu_to_le16(count); set_bit(WDM_IN_USE, &desc->flags); + desc->outbuf = buf; rv = usb_submit_urb(desc->command, GFP_KERNEL); if (rv < 0) { kfree(buf); + desc->outbuf = NULL; clear_bit(WDM_IN_USE, &desc->flags); dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv); } else { -- cgit v1.2.3 From b930fe5e1f5646e071facda70b25b137ebeae5af Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 26 Apr 2012 14:22:33 -0400 Subject: xen/acpi: Workaround broken BIOSes exporting non-existing C-states. We did a similar check for the P-states but did not do it for the C-states. What we want to do is ignore cases where the DSDT has definition for sixteen CPUs, but the machine only has eight CPUs and we get: xen-acpi-processor: (CX): Hypervisor error (-22) for ACPI CPU14 Reported-by: Tobias Geiger Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xen-acpi-processor.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/xen-acpi-processor.c b/drivers/xen/xen-acpi-processor.c index 174b5653cd8a..0b48579a9cd6 100644 --- a/drivers/xen/xen-acpi-processor.c +++ b/drivers/xen/xen-acpi-processor.c @@ -128,7 +128,10 @@ static int push_cxx_to_hypervisor(struct acpi_processor *_pr) pr_debug(" C%d: %s %d uS\n", cx->type, cx->desc, (u32)cx->latency); } - } else + } else if (ret != -EINVAL) + /* EINVAL means the ACPI ID is incorrect - meaning the ACPI + * table is referencing a non-existing CPU - which can happen + * with broken ACPI tables. */ pr_err(DRV_NAME "(CX): Hypervisor error (%d) for ACPI CPU%u\n", ret, _pr->acpi_id); -- cgit v1.2.3 From b95ace54a23e2f8ebb032744cebb17c9f43bf651 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 22 Apr 2012 13:37:24 +0200 Subject: ARM: pxa: fix gpio wakeup setting In 3.3, gpio wakeup setting was broken. The call enable_irq_wake() didn't set up the PXA gpio registers (PWER, ...) anymore. Fix it at least for pxa27x. The driver doesn't seem to be used in pxa25x (weird ...), and the fix doesn't extend to pxa3xx and pxa95x (which don't have a gpio_set_wake() available). Signed-off-by: Robert Jarzmik Signed-off-by: Haojian Zhuang --- drivers/gpio/gpio-pxa.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 5689ce62fd81..fc3ace3fd4cb 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -64,6 +64,7 @@ struct pxa_gpio_chip { unsigned long irq_mask; unsigned long irq_edge_rise; unsigned long irq_edge_fall; + int (*set_wake)(unsigned int gpio, unsigned int on); #ifdef CONFIG_PM unsigned long saved_gplr; @@ -269,7 +270,8 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) (value ? GPSR_OFFSET : GPCR_OFFSET)); } -static int __devinit pxa_init_gpio_chip(int gpio_end) +static int __devinit pxa_init_gpio_chip(int gpio_end, + int (*set_wake)(unsigned int, unsigned int)) { int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; struct pxa_gpio_chip *chips; @@ -285,6 +287,7 @@ static int __devinit pxa_init_gpio_chip(int gpio_end) sprintf(chips[i].label, "gpio-%d", i); chips[i].regbase = gpio_reg_base + BANK_OFF(i); + chips[i].set_wake = set_wake; c->base = gpio; c->label = chips[i].label; @@ -412,6 +415,17 @@ static void pxa_mask_muxed_gpio(struct irq_data *d) writel_relaxed(gfer, c->regbase + GFER_OFFSET); } +static int pxa_gpio_set_wake(struct irq_data *d, unsigned int on) +{ + int gpio = pxa_irq_to_gpio(d->irq); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); + + if (c->set_wake) + return c->set_wake(gpio, on); + else + return 0; +} + static void pxa_unmask_muxed_gpio(struct irq_data *d) { int gpio = pxa_irq_to_gpio(d->irq); @@ -427,6 +441,7 @@ static struct irq_chip pxa_muxed_gpio_chip = { .irq_mask = pxa_mask_muxed_gpio, .irq_unmask = pxa_unmask_muxed_gpio, .irq_set_type = pxa_gpio_irq_type, + .irq_set_wake = pxa_gpio_set_wake, }; static int pxa_gpio_nums(void) @@ -471,6 +486,7 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev) struct pxa_gpio_chip *c; struct resource *res; struct clk *clk; + struct pxa_gpio_platform_data *info; int gpio, irq, ret; int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0; @@ -516,7 +532,8 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev) } /* Initialize GPIO chips */ - pxa_init_gpio_chip(pxa_last_gpio); + info = dev_get_platdata(&pdev->dev); + pxa_init_gpio_chip(pxa_last_gpio, info ? info->gpio_set_wake : NULL); /* clear all GPIO edge detects */ for_each_gpio_chip(gpio, c) { -- cgit v1.2.3 From df391c0df49560c7fceffbad5b9d083836d9f22f Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Thu, 19 Apr 2012 12:22:20 -0400 Subject: drm/radeon: add a missing entry to encoder_names An entry for INTERNAL_VCE encoder was missing. Add it. Signed-off-by: Ilija Hadzic Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 8086c96e0b06..0a1d4bd65edc 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -533,7 +533,7 @@ static void radeon_crtc_init(struct drm_device *dev, int index) radeon_legacy_init_crtc(dev, radeon_crtc); } -static const char *encoder_names[36] = { +static const char *encoder_names[37] = { "NONE", "INTERNAL_LVDS", "INTERNAL_TMDS1", @@ -570,6 +570,7 @@ static const char *encoder_names[36] = { "INTERNAL_UNIPHY2", "NUTMEG", "TRAVIS", + "INTERNAL_VCE" }; static const char *connector_names[15] = { -- cgit v1.2.3 From 37d4174d2d252c37dcb3d88cafae488542087848 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Apr 2012 10:48:38 -0400 Subject: drm/radeon/kms: use frac fb div on APUs Seems to be more stable on certain monitors. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=48880 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index b5ff1f7b6f7e..c5c31e091a92 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -575,6 +575,9 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, if (rdev->family < CHIP_RV770) pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP; + /* use frac fb div on APUs */ + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev)) + pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV; } else { pll->flags |= RADEON_PLL_LEGACY; -- cgit v1.2.3 From 83a787a71e034244a9fd1d5988fe18f226341417 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 27 Apr 2012 11:02:15 +0300 Subject: usb: gadget: udc-core: fix wrong call order commit 6d258a4 (usb: gadget: udc-core: stop UDC on device-initiated disconnect) introduced another case of asymmetric calls when issuing a device-initiated disconnect. Fix it. Reported-by: Ben Hutchings Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 2fa9865babed..df1bd87232dd 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -415,9 +415,9 @@ static ssize_t usb_udc_softconn_store(struct device *dev, usb_gadget_udc_start(udc->gadget, udc->driver); usb_gadget_connect(udc->gadget); } else if (sysfs_streq(buf, "disconnect")) { + usb_gadget_disconnect(udc->gadget); if (udc_is_newstyle(udc)) usb_gadget_udc_stop(udc->gadget, udc->driver); - usb_gadget_disconnect(udc->gadget); } else { dev_err(dev, "unsupported command '%s'\n", buf); return -EINVAL; -- cgit v1.2.3 From 320cd1e750f1bf3e47eb41209dcb2be07264cb76 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 26 Apr 2012 11:31:57 -0400 Subject: usb: gadget: udc-core: fix incompatibility with dummy-hcd This patch (as1548) fixes a recently-introduced incompatibility between the UDC core and the dummy-hcd driver. Commit 8ae8090c82eb407267001f75b3d256b3bd4ae691 (usb: gadget: udc-core: fix asymmetric calls in remove_driver) moved the usb_gadget_udc_stop() call in usb_gadget_remove_driver() below the usb_gadget_disconnect() call. As a result, usb_gadget_disconnect() gets called at a time when the gadget driver believes it has been unbound but dummy-hcd believes it has not. A nasty error ensues when dummy-hcd calls the gadget driver's disconnect method a second time. To fix the problem, this patch moves the gadget driver's unbind notification after the usb_gadget_disconnect() call. Now nothing happens between the two unbind notifications, so nothing goes wrong. Signed-off-by: Alan Stern Tested-by: Alexander Shishkin Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index df1bd87232dd..e5e44f8cde9a 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -263,8 +263,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) if (udc_is_newstyle(udc)) { udc->driver->disconnect(udc->gadget); - udc->driver->unbind(udc->gadget); usb_gadget_disconnect(udc->gadget); + udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc->gadget, udc->driver); } else { usb_gadget_stop(udc->gadget, udc->driver); -- cgit v1.2.3 From 1e4f0b82577e59f23484c99056c96465e202fdd5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 25 Apr 2012 13:39:38 +0200 Subject: i2c: mxs: disable QUEUE when sending is done Since the last fixes to this driver ensure now the queue termination is done correctly, we can finally disable the queue after a transfer without problems. The gain is that it will only be reenabled after the next transfer is fully set up. Before, the queue was running all the time and if the setup of the next message was interrupted by another thread, an incomplete buffer could have been sent, padded with zeroes. Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 4c37347973e6..76b8af44f634 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -253,6 +253,9 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, if (i2c->cmd_err == -ENXIO) mxs_i2c_reset(i2c); + else + writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, + i2c->regs + MXS_I2C_QUEUECTRL_CLR); dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err); @@ -383,8 +386,6 @@ static int __devexit mxs_i2c_remove(struct platform_device *pdev) if (ret) return -EBUSY; - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, - i2c->regs + MXS_I2C_QUEUECTRL_CLR); writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET); platform_set_drvdata(pdev, NULL); -- cgit v1.2.3 From 5eb806a3a68920a9f373f18b03fa14852047e62b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 19 Apr 2012 14:44:21 +0530 Subject: spi/pl022: Fix calculate_effective_freq() calculate_effective_freq() was still not optimized and there were cases when it returned without error and with values of cpsr and scr as zero. Also, the variable named found is not used well. This patch targets to optimize and correct this routine. Tested for SPEAr. Signed-off-by: Viresh Kumar Tested-by: Vinit Kamalaksha Shenoy Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/spi-pl022.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 1ead49dbebce..8aa44e7adaef 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1681,26 +1681,37 @@ static int calculate_effective_freq(struct pl022 *pl022, int freq, struct while (scr <= SCR_MAX) { tmp = spi_rate(rate, cpsdvsr, scr); - if (tmp > freq) + if (tmp > freq) { + /* we need lower freq */ scr++; + continue; + } + /* - * If found exact value, update and break. - * If found more closer value, update and continue. + * If found exact value, mark found and break. + * If found more closer value, update and break. */ - else if ((tmp == freq) || (tmp > best_freq)) { + if (tmp > best_freq) { best_freq = tmp; best_cpsdvsr = cpsdvsr; best_scr = scr; if (tmp == freq) - break; + found = 1; } - scr++; + /* + * increased scr will give lower rates, which are not + * required + */ + break; } cpsdvsr += 2; scr = SCR_MIN; } + WARN(!best_freq, "pl022: Matching cpsdvsr and scr not found for %d Hz rate \n", + freq); + clk_freq->cpsdvsr = (u8) (best_cpsdvsr & 0xFF); clk_freq->scr = (u8) (best_scr & 0xFF); dev_dbg(&pl022->adev->dev, -- cgit v1.2.3 From d4b9b578cba7231c1fbafbe901a2e8f38654e056 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 17 Apr 2012 18:46:36 -0700 Subject: spi/spi-ep93xx.c: use dma_transfer_direction instead of dma_data_direction A new enum indicating the dma channel direction was introduced by: commit 49920bc66984a512f4bcc7735a61642cd0e4d6f2 dmaengine: add new enum dma_transfer_direction The following commit changed spi-ep93xx to use the new enum: commit a485df4b4404379786c4bdd258bc528b2617449d spi, serial: move to dma_transfer_direction In doing so a sparse warning was introduced: warning: mixing different enum types int enum dma_data_direction versus int enum dma_transfer_direction This is produced because the 'dir' passed in ep93xx_spi_dma_prepare is an enum dma_data_direction and is being used to set the dma_slave_config 'direction' which is now an enum dma_transfer_direction. Fix this by converting spi-ep93xx to use the new enum type in all places. Signed-off-by: H Hartley Sweeten Acked-by: Mika Westerberg Acked-by: Vinod Koul Signed-off-by: Grant Likely --- drivers/spi/spi-ep93xx.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 6db2887852d6..e8055073e84d 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -545,13 +545,12 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi) * in case of failure. */ static struct dma_async_tx_descriptor * -ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) +ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir) { struct spi_transfer *t = espi->current_msg->state; struct dma_async_tx_descriptor *txd; enum dma_slave_buswidth buswidth; struct dma_slave_config conf; - enum dma_transfer_direction slave_dirn; struct scatterlist *sg; struct sg_table *sgt; struct dma_chan *chan; @@ -567,14 +566,13 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) memset(&conf, 0, sizeof(conf)); conf.direction = dir; - if (dir == DMA_FROM_DEVICE) { + if (dir == DMA_DEV_TO_MEM) { chan = espi->dma_rx; buf = t->rx_buf; sgt = &espi->rx_sgt; conf.src_addr = espi->sspdr_phys; conf.src_addr_width = buswidth; - slave_dirn = DMA_DEV_TO_MEM; } else { chan = espi->dma_tx; buf = t->tx_buf; @@ -582,7 +580,6 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) conf.dst_addr = espi->sspdr_phys; conf.dst_addr_width = buswidth; - slave_dirn = DMA_MEM_TO_DEV; } ret = dmaengine_slave_config(chan, &conf); @@ -633,8 +630,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) if (!nents) return ERR_PTR(-ENOMEM); - txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, - slave_dirn, DMA_CTRL_ACK); + txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, dir, DMA_CTRL_ACK); if (!txd) { dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); return ERR_PTR(-ENOMEM); @@ -651,12 +647,12 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) * unmapped. */ static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi, - enum dma_data_direction dir) + enum dma_transfer_direction dir) { struct dma_chan *chan; struct sg_table *sgt; - if (dir == DMA_FROM_DEVICE) { + if (dir == DMA_DEV_TO_MEM) { chan = espi->dma_rx; sgt = &espi->rx_sgt; } else { @@ -677,16 +673,16 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) struct spi_message *msg = espi->current_msg; struct dma_async_tx_descriptor *rxd, *txd; - rxd = ep93xx_spi_dma_prepare(espi, DMA_FROM_DEVICE); + rxd = ep93xx_spi_dma_prepare(espi, DMA_DEV_TO_MEM); if (IS_ERR(rxd)) { dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd)); msg->status = PTR_ERR(rxd); return; } - txd = ep93xx_spi_dma_prepare(espi, DMA_TO_DEVICE); + txd = ep93xx_spi_dma_prepare(espi, DMA_MEM_TO_DEV); if (IS_ERR(txd)) { - ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE); + ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM); dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(rxd)); msg->status = PTR_ERR(txd); return; @@ -705,8 +701,8 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) wait_for_completion(&espi->wait); - ep93xx_spi_dma_finish(espi, DMA_TO_DEVICE); - ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE); + ep93xx_spi_dma_finish(espi, DMA_MEM_TO_DEV); + ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM); } /** -- cgit v1.2.3 From cde4384e1037c15e5dd04c68d19c75798b6281dd Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 20 Apr 2012 15:37:33 +0200 Subject: spi/bcm63xx: convert to the pump message infrastructure This patch converts the bcm63xx SPI driver to use the SPI infrastructure pump message queue. Since we were previously sleeping in the SPI driver's transfer() function (which is not allowed) this is now fixed as well. To complete that conversion a certain number of changes have been made: - the transfer len is split into multiple hardware transfers in case its size is bigger than the hardware FIFO size - the FIFO refill is no longer done in the interrupt context, which was a bad idea leading to quick interrupt handler re-entrancy Tested-by: Tanguy Bouzeloc Signed-off-by: Florian Fainelli Signed-off-by: Grant Likely --- drivers/spi/spi-bcm63xx.c | 149 +++++++++++++++++++++++++++------------------- 1 file changed, 89 insertions(+), 60 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index f01b2648452e..63b0028a8bd3 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -1,7 +1,7 @@ /* * Broadcom BCM63xx SPI controller support * - * Copyright (C) 2009-2011 Florian Fainelli + * Copyright (C) 2009-2012 Florian Fainelli * Copyright (C) 2010 Tanguy Bouzeloc * * This program is free software; you can redistribute it and/or @@ -30,6 +30,8 @@ #include #include #include +#include +#include #include @@ -96,17 +98,12 @@ static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = { { 391000, SPI_CLK_0_391MHZ } }; -static int bcm63xx_spi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) +static int bcm63xx_spi_check_transfer(struct spi_device *spi, + struct spi_transfer *t) { - struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); u8 bits_per_word; - u8 clk_cfg, reg; - u32 hz; - int i; bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word; - hz = (t) ? t->speed_hz : spi->max_speed_hz; if (bits_per_word != 8) { dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", __func__, bits_per_word); @@ -119,6 +116,19 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi, return -EINVAL; } + return 0; +} + +static void bcm63xx_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); + u32 hz; + u8 clk_cfg, reg; + int i; + + hz = (t) ? t->speed_hz : spi->max_speed_hz; + /* Find the closest clock configuration */ for (i = 0; i < SPI_CLK_MASK; i++) { if (hz <= bcm63xx_spi_freq_table[i][0]) { @@ -139,8 +149,6 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi, bcm_spi_writeb(bs, reg, SPI_CLK_CFG); dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n", clk_cfg, hz); - - return 0; } /* the spi->mode bits understood by this driver: */ @@ -165,7 +173,7 @@ static int bcm63xx_spi_setup(struct spi_device *spi) return -EINVAL; } - ret = bcm63xx_spi_setup_transfer(spi, NULL); + ret = bcm63xx_spi_check_transfer(spi, NULL); if (ret < 0) { dev_err(&spi->dev, "setup: unsupported mode bits %x\n", spi->mode & ~MODEBITS); @@ -190,28 +198,29 @@ static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) bs->remaining_bytes -= size; } -static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) +static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, + struct spi_transfer *t) { struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); u16 msg_ctl; u16 cmd; + /* Disable the CMD_DONE interrupt */ + bcm_spi_writeb(bs, 0, SPI_INT_MASK); + dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", t->tx_buf, t->rx_buf, t->len); /* Transmitter is inhibited */ bs->tx_ptr = t->tx_buf; bs->rx_ptr = t->rx_buf; - init_completion(&bs->done); if (t->tx_buf) { bs->remaining_bytes = t->len; bcm63xx_spi_fill_tx_fifo(bs); } - /* Enable the command done interrupt which - * we use to determine completion of a command */ - bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); + init_completion(&bs->done); /* Fill in the Message control register */ msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); @@ -230,33 +239,76 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); bcm_spi_writew(bs, cmd, SPI_CMD); - wait_for_completion(&bs->done); - /* Disable the CMD_DONE interrupt */ - bcm_spi_writeb(bs, 0, SPI_INT_MASK); + /* Enable the CMD_DONE interrupt */ + bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); return t->len - bs->remaining_bytes; } -static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m) +static int bcm63xx_spi_prepare_transfer(struct spi_master *master) { - struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); - struct spi_transfer *t; - int ret = 0; + struct bcm63xx_spi *bs = spi_master_get_devdata(master); - if (unlikely(list_empty(&m->transfers))) - return -EINVAL; + pm_runtime_get_sync(&bs->pdev->dev); - if (bs->stopping) - return -ESHUTDOWN; + return 0; +} + +static int bcm63xx_spi_unprepare_transfer(struct spi_master *master) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(master); + + pm_runtime_put(&bs->pdev->dev); + + return 0; +} + +static int bcm63xx_spi_transfer_one(struct spi_master *master, + struct spi_message *m) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(master); + struct spi_transfer *t; + struct spi_device *spi = m->spi; + int status = 0; + unsigned int timeout = 0; list_for_each_entry(t, &m->transfers, transfer_list) { - ret += bcm63xx_txrx_bufs(spi, t); - } + unsigned int len = t->len; + u8 rx_tail; - m->complete(m->context); + status = bcm63xx_spi_check_transfer(spi, t); + if (status < 0) + goto exit; - return ret; + /* configure adapter for a new transfer */ + bcm63xx_spi_setup_transfer(spi, t); + + while (len) { + /* send the data */ + len -= bcm63xx_txrx_bufs(spi, t); + + timeout = wait_for_completion_timeout(&bs->done, HZ); + if (!timeout) { + status = -ETIMEDOUT; + goto exit; + } + + /* read out all data */ + rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); + + /* Read out all the data */ + if (rx_tail) + memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); + } + + m->actual_length += t->len; + } +exit: + m->status = status; + spi_finalize_current_message(master); + + return 0; } /* This driver supports single master mode only. Hence @@ -267,39 +319,15 @@ static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) struct spi_master *master = (struct spi_master *)dev_id; struct bcm63xx_spi *bs = spi_master_get_devdata(master); u8 intr; - u16 cmd; /* Read interupts and clear them immediately */ intr = bcm_spi_readb(bs, SPI_INT_STATUS); bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); bcm_spi_writeb(bs, 0, SPI_INT_MASK); - /* A tansfer completed */ - if (intr & SPI_INTR_CMD_DONE) { - u8 rx_tail; - - rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); - - /* Read out all the data */ - if (rx_tail) - memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); - - /* See if there is more data to send */ - if (bs->remaining_bytes > 0) { - bcm63xx_spi_fill_tx_fifo(bs); - - /* Start the transfer */ - bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT, - SPI_MSG_CTL); - cmd = bcm_spi_readw(bs, SPI_CMD); - cmd |= SPI_CMD_START_IMMEDIATE; - cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); - bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); - bcm_spi_writew(bs, cmd, SPI_CMD); - } else { - complete(&bs->done); - } - } + /* A transfer completed */ + if (intr & SPI_INTR_CMD_DONE) + complete(&bs->done); return IRQ_HANDLED; } @@ -345,7 +373,6 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) } bs = spi_master_get_devdata(master); - init_completion(&bs->done); platform_set_drvdata(pdev, master); bs->pdev = pdev; @@ -379,7 +406,9 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->bus_num = pdata->bus_num; master->num_chipselect = pdata->num_chipselect; master->setup = bcm63xx_spi_setup; - master->transfer = bcm63xx_transfer; + master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer; + master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer; + master->transfer_one_message = bcm63xx_spi_transfer_one; bs->speed_hz = pdata->speed_hz; bs->stopping = 0; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); -- cgit v1.2.3 From 1e41dc0ee2f3807328db95e4f87ff1333245190f Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 20 Apr 2012 15:37:34 +0200 Subject: spi/bcm63xx: don't use the stopping state We do not need to use a flag to indicate if the master driver is stopping it is sufficient to perform spi master unregistering in the platform driver's remove function. Signed-off-by: Florian Fainelli Signed-off-by: Grant Likely --- drivers/spi/spi-bcm63xx.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 63b0028a8bd3..80e5ed34e0d9 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -39,8 +39,6 @@ #define DRV_VER "0.1.2" struct bcm63xx_spi { - spinlock_t lock; - int stopping; struct completion done; void __iomem *regs; @@ -161,9 +159,6 @@ static int bcm63xx_spi_setup(struct spi_device *spi) bs = spi_master_get_devdata(spi->master); - if (bs->stopping) - return -ESHUTDOWN; - if (!spi->bits_per_word) spi->bits_per_word = 8; @@ -410,10 +405,8 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer; master->transfer_one_message = bcm63xx_spi_transfer_one; bs->speed_hz = pdata->speed_hz; - bs->stopping = 0; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); - spin_lock_init(&bs->lock); /* Initialize hardware */ clk_enable(bs->clk); @@ -447,18 +440,16 @@ static int __devexit bcm63xx_spi_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct bcm63xx_spi *bs = spi_master_get_devdata(master); + spi_unregister_master(master); + /* reset spi block */ bcm_spi_writeb(bs, 0, SPI_INT_MASK); - spin_lock(&bs->lock); - bs->stopping = 1; /* HW shutdown */ clk_disable(bs->clk); clk_put(bs->clk); - spin_unlock(&bs->lock); platform_set_drvdata(pdev, 0); - spi_unregister_master(master); return 0; } -- cgit v1.2.3 From 88a3a255a510ed193bf0cc35424761c3c9247586 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 20 Apr 2012 15:37:35 +0200 Subject: spi/bcm63xx: set master driver mode_bits. We were not properly advertising the MODE bits supported by this driver, fix that. Signed-off-by: Florian Fainelli Signed-off-by: Grant Likely --- drivers/spi/spi-bcm63xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 80e5ed34e0d9..7491971139a6 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -404,6 +404,7 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer; master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer; master->transfer_one_message = bcm63xx_spi_transfer_one; + master->mode_bits = MODEBITS; bs->speed_hz = pdata->speed_hz; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); -- cgit v1.2.3 From ea505bc99f77f3f9db02bb965bd59ac5db063f60 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 19 Apr 2012 11:48:15 +0530 Subject: spi/pl022: Allow request for higher frequency than maximum possible Currently, if we request for frequency greater than maximum possible, spi driver returns error. For example, if the spi block src frequency is 333/4 MHz, i.e. 83.33.. MHz, maximum frequency programmable would be src/2. Which would come around 41.6... It is difficult to pass frequency in these figures. We normally try to program in round figures, like 42 MHz and it should get programmed to <= requested_frequency, i.e. 41.6... For this to happen, we must not return error even if requested freq is higher than max possible. But should program it to max possible. Reported-by: Vinit Kamalaksha Shenoy Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/spi-pl022.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 8aa44e7adaef..400ae2121a2a 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1667,9 +1667,15 @@ static int calculate_effective_freq(struct pl022 *pl022, int freq, struct /* cpsdvsr = 254 & scr = 255 */ min_tclk = spi_rate(rate, CPSDVR_MAX, SCR_MAX); - if (!((freq <= max_tclk) && (freq >= min_tclk))) { + if (freq > max_tclk) + dev_warn(&pl022->adev->dev, + "Max speed that can be programmed is %d Hz, you requested %d\n", + max_tclk, freq); + + if (freq < min_tclk) { dev_err(&pl022->adev->dev, - "controller data is incorrect: out of range frequency"); + "Requested frequency: %d Hz is less than minimum possible %d Hz\n", + freq, min_tclk); return -EINVAL; } -- cgit v1.2.3 From 22ac3e82e1d3e5cad92538fe4ab51906cb220444 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:08 -0400 Subject: spi/bfin5xx: rename config macro name for bfin5xx spi controller driver This controller is only for blackfin 5xx soc, so rename it to BFIN5XX Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 2 +- drivers/spi/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 3ed748355b98..00c024039c97 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -74,7 +74,7 @@ config SPI_ATMEL This selects a driver for the Atmel SPI Controller, present on many AT32 (AVR32) and AT91 (ARM) chips. -config SPI_BFIN +config SPI_BFIN5XX tristate "SPI controller driver for ADI Blackfin5xx" depends on BLACKFIN help diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index a1d48e0ba3dc..9d75d2198ff5 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o obj-$(CONFIG_SPI_ATH79) += spi-ath79.o obj-$(CONFIG_SPI_AU1550) += spi-au1550.o obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o -obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o +obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o -- cgit v1.2.3 From 488e1a9de27f0a299fc185f0b5c67246a3f0c6c9 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:09 -0400 Subject: spi/spi-bfin-sport: move word length setup to transfer handler Each transfer may have its own bits per word. Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin-sport.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c index 248a2cc671a9..bfd90474c7e2 100644 --- a/drivers/spi/spi-bfin-sport.c +++ b/drivers/spi/spi-bfin-sport.c @@ -252,19 +252,15 @@ static void bfin_sport_spi_restore_state(struct bfin_sport_spi_master_data *drv_data) { struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip; - unsigned int bits = (drv_data->ops == &bfin_sport_transfer_ops_u8 ? 7 : 15); bfin_sport_spi_disable(drv_data); dev_dbg(drv_data->dev, "restoring spi ctl state\n"); bfin_write(&drv_data->regs->tcr1, chip->ctl_reg); - bfin_write(&drv_data->regs->tcr2, bits); bfin_write(&drv_data->regs->tclkdiv, chip->baud); - bfin_write(&drv_data->regs->tfsdiv, bits); SSYNC(); bfin_write(&drv_data->regs->rcr1, chip->ctl_reg & ~(ITCLK | ITFS)); - bfin_write(&drv_data->regs->rcr2, bits); SSYNC(); bfin_sport_spi_cs_active(chip); @@ -425,6 +421,9 @@ bfin_sport_spi_pump_transfers(unsigned long data) drv_data->ops = &bfin_sport_transfer_ops_u8; else drv_data->ops = &bfin_sport_transfer_ops_u16; + bfin_write(&drv_data->regs->tcr2, bits_per_word - 1); + bfin_write(&drv_data->regs->tfsdiv, bits_per_word - 1); + bfin_write(&drv_data->regs->rcr2, bits_per_word - 1); drv_data->state = RUNNING_STATE; -- cgit v1.2.3 From 7666fd8b02af87a8b672b00d47e56d77f709127e Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:10 -0400 Subject: spi/bfin_spi: drop bits_per_word from client data No other SPI controller has this field, and SPI clients should be setting this up in their own drivers. So drop it from the Blackfin controller to keep people from using it. Signed-off-by: Mike Frysinger Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin5xx.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 3b83ff8b1e2b..c0cdcb7c8135 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -1026,7 +1026,6 @@ static int bfin_spi_setup(struct spi_device *spi) chip->cs_chg_udelay = chip_info->cs_chg_udelay; chip->idle_tx_val = chip_info->idle_tx_val; chip->pio_interrupt = chip_info->pio_interrupt; - spi->bits_per_word = chip_info->bits_per_word; } else { /* force a default base state */ chip->ctl_reg &= bfin_ctl_reg; -- cgit v1.2.3 From 8d9d2a4b6ca0013b62a438808d22bdd615abcd00 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:11 -0400 Subject: spi/spi_bfin_sport: drop bits_per_word from client data Since the member was dropped from the common Blackfin header, we need to stop using it in the SPORT driver too. Signed-off-by: Mike Frysinger Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin-sport.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c index bfd90474c7e2..1fe51198a622 100644 --- a/drivers/spi/spi-bfin-sport.c +++ b/drivers/spi/spi-bfin-sport.c @@ -416,11 +416,12 @@ bfin_sport_spi_pump_transfers(unsigned long data) drv_data->cs_change = transfer->cs_change; /* Bits per word setup */ - bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; - if (bits_per_word == 8) - drv_data->ops = &bfin_sport_transfer_ops_u8; - else + bits_per_word = transfer->bits_per_word ? : + message->spi->bits_per_word ? : 8; + if (bits_per_word % 16 == 0) drv_data->ops = &bfin_sport_transfer_ops_u16; + else + drv_data->ops = &bfin_sport_transfer_ops_u8; bfin_write(&drv_data->regs->tcr2, bits_per_word - 1); bfin_write(&drv_data->regs->tfsdiv, bits_per_word - 1); bfin_write(&drv_data->regs->rcr2, bits_per_word - 1); @@ -597,11 +598,12 @@ bfin_sport_spi_setup(struct spi_device *spi) } chip->cs_chg_udelay = chip_info->cs_chg_udelay; chip->idle_tx_val = chip_info->idle_tx_val; - spi->bits_per_word = chip_info->bits_per_word; } } - if (spi->bits_per_word != 8 && spi->bits_per_word != 16) { + if (spi->bits_per_word % 8) { + dev_err(&spi->dev, "%d bits_per_word is not supported\n", + spi->bits_per_word); ret = -EINVAL; goto error; } -- cgit v1.2.3 From 128465ca7c0775609b1c24f66cd6bddac5f59c9b Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:12 -0400 Subject: spi/spi-bfin5xx: fix reversed if condition in interrupt mode This condition is used to determine 8 bits or 16 and 32 bits transfer. Obviously it is reversed. Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin5xx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index c0cdcb7c8135..432d0190e6ba 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -396,7 +396,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) /* last read */ if (drv_data->rx) { dev_dbg(&drv_data->pdev->dev, "last read\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->rx; for (loop = 0; loop < n_bytes / 2; loop++) *buf++ = bfin_read(&drv_data->regs->rdbr); @@ -424,7 +424,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) if (drv_data->rx && drv_data->tx) { /* duplex */ dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->rx; u16 *buf2 = (u16 *)drv_data->tx; for (loop = 0; loop < n_bytes / 2; loop++) { @@ -442,7 +442,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) } else if (drv_data->rx) { /* read */ dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->rx; for (loop = 0; loop < n_bytes / 2; loop++) { *buf++ = bfin_read(&drv_data->regs->rdbr); @@ -458,7 +458,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) } else if (drv_data->tx) { /* write */ dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->tx; for (loop = 0; loop < n_bytes / 2; loop++) { bfin_read(&drv_data->regs->rdbr); -- cgit v1.2.3 From 2431a8154634027ce3915200699f26fb3725a1f2 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:13 -0400 Subject: spi/spi-bfin5xx: Fix flush of last bit after each spi transfer This patch ensures that the last bit of a transfer gets correctly flushed out of the register. Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin5xx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 432d0190e6ba..9bb4d4af8547 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -587,6 +587,7 @@ static void bfin_spi_pump_transfers(unsigned long data) if (message->state == DONE_STATE) { dev_dbg(&drv_data->pdev->dev, "transfer: all done!\n"); message->status = 0; + bfin_spi_flush(drv_data); bfin_spi_giveback(drv_data); return; } @@ -870,8 +871,10 @@ static void bfin_spi_pump_transfers(unsigned long data) message->actual_length += drv_data->len_in_bytes; /* Move to next transfer of this msg */ message->state = bfin_spi_next_transfer(drv_data); - if (drv_data->cs_change) + if (drv_data->cs_change && message->state != DONE_STATE) { + bfin_spi_flush(drv_data); bfin_spi_cs_deactive(drv_data, chip); + } } /* Schedule next transfer tasklet */ -- cgit v1.2.3 From 1cc2699057bafc512137272e1e848640bad14a41 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Mon, 23 Apr 2012 14:24:52 -0700 Subject: brcm80211: fmac: fix SDIO function 0 register r/w issue SDIO stack doesn't have a structure for function 0. The structure pointer stored in card->sdio_func[0] is actually for function 1. With current implementation the register read/write is applied to function 1. This pathch fixes the issue. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Reviewed-by: Florian Fainelli Reviewed-by: Johannes Berg Signed-off-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 4688904908ec..758c115b556e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -108,9 +108,15 @@ static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev, sdio_release_host(sdfunc); } } else if (regaddr == SDIO_CCCR_ABORT) { + sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func), + GFP_KERNEL); + if (!sdfunc) + return -ENOMEM; + sdfunc->num = 0; sdio_claim_host(sdfunc); sdio_writeb(sdfunc, *byte, regaddr, &err_ret); sdio_release_host(sdfunc); + kfree(sdfunc); } else if (regaddr < 0xF0) { brcmf_dbg(ERROR, "F0 Wr:0x%02x: write disallowed\n", regaddr); err_ret = -EPERM; @@ -486,7 +492,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func, kfree(bus_if); return -ENOMEM; } - sdiodev->func[0] = func->card->sdio_func[0]; + sdiodev->func[0] = func; sdiodev->func[1] = func; sdiodev->bus_if = bus_if; bus_if->bus_priv.sdio = sdiodev; -- cgit v1.2.3 From b948a85c1f26d48395de8c6c7e392f008f1be666 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Mon, 23 Apr 2012 14:24:53 -0700 Subject: brcm80211: fmac: fix missing completion events issue dpc takes care of all data packets transmissions for sdio function 2. It is possible that it misses some completion events when the traffic is heavy or it's running on a slow cpu. A linked list is introduced to make sure dpc is invoked whenever needed. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 63 +++++++++++++++++----- 1 file changed, 51 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 2bf5dda29291..eb3829b03cd3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -574,6 +574,8 @@ struct brcmf_sdio { struct task_struct *dpc_tsk; struct completion dpc_wait; + struct list_head dpc_tsklst; + spinlock_t dpc_tl_lock; struct semaphore sdsem; @@ -2594,29 +2596,58 @@ clkwait: return resched; } +static inline void brcmf_sdbrcm_adddpctsk(struct brcmf_sdio *bus) +{ + struct list_head *new_hd; + unsigned long flags; + + if (in_interrupt()) + new_hd = kzalloc(sizeof(struct list_head), GFP_ATOMIC); + else + new_hd = kzalloc(sizeof(struct list_head), GFP_KERNEL); + if (new_hd == NULL) + return; + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_add_tail(new_hd, &bus->dpc_tsklst); + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); +} + static int brcmf_sdbrcm_dpc_thread(void *data) { struct brcmf_sdio *bus = (struct brcmf_sdio *) data; + struct list_head *cur_hd, *tmp_hd; + unsigned long flags; allow_signal(SIGTERM); /* Run until signal received */ while (1) { if (kthread_should_stop()) break; - if (!wait_for_completion_interruptible(&bus->dpc_wait)) { - /* Call bus dpc unless it indicated down - (then clean stop) */ - if (bus->sdiodev->bus_if->state != BRCMF_BUS_DOWN) { - if (brcmf_sdbrcm_dpc(bus)) - complete(&bus->dpc_wait); - } else { + + if (list_empty(&bus->dpc_tsklst)) + if (wait_for_completion_interruptible(&bus->dpc_wait)) + break; + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_for_each_safe(cur_hd, tmp_hd, &bus->dpc_tsklst) { + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); + + if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) { /* after stopping the bus, exit thread */ brcmf_sdbrcm_bus_stop(bus->sdiodev->dev); bus->dpc_tsk = NULL; break; } - } else - break; + + if (brcmf_sdbrcm_dpc(bus)) + brcmf_sdbrcm_adddpctsk(bus); + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_del(cur_hd); + kfree(cur_hd); + } + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); } return 0; } @@ -2669,8 +2700,10 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) /* Schedule DPC if needed to send queued packet(s) */ if (!bus->dpc_sched) { bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } return ret; @@ -3514,8 +3547,10 @@ void brcmf_sdbrcm_isr(void *arg) brcmf_dbg(ERROR, "isr w/o interrupt configured!\n"); bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) @@ -3559,8 +3594,10 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) bus->ipend = true; bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } } @@ -3897,6 +3934,8 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) } /* Initialize DPC thread */ init_completion(&bus->dpc_wait); + INIT_LIST_HEAD(&bus->dpc_tsklst); + spin_lock_init(&bus->dpc_tl_lock); bus->dpc_tsk = kthread_run(brcmf_sdbrcm_dpc_thread, bus, "brcmf_dpc"); if (IS_ERR(bus->dpc_tsk)) { -- cgit v1.2.3 From 3708dc248946daba8802c8f31a68dca81ffc445f Mon Sep 17 00:00:00 2001 From: Jonathan Bither Date: Tue, 24 Apr 2012 05:20:15 -0400 Subject: ath5k: add missing iounmap to AHB probe removal When our driver device is removed on the AHB bus, our IO memory is never unmapped. Signed-off-by: Jonathan Bither Reviewed-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ahb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c index 8c50d9d19d78..aec33cc207fd 100644 --- a/drivers/net/wireless/ath/ath5k/ahb.c +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -220,6 +220,7 @@ static int ath_ahb_remove(struct platform_device *pdev) } ath5k_deinit_ah(ah); + iounmap(ah->iobase); platform_set_drvdata(pdev, NULL); ieee80211_free_hw(hw); -- cgit v1.2.3 From 1ed2ec37b44e86eaa8e0a03b908a39c80f65ee45 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Wed, 25 Apr 2012 08:10:08 -0700 Subject: iwlwifi: use 6000G2B for 6030 device series "iwlwifi: use correct released ucode version" change the ucode api ok from 6000G2 to 6000G2B, but it shall belong to 6030 device series, not the 6005 device series. Fix it Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index b1b69515b1a0..f0c91505a7f7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -336,7 +336,7 @@ static const struct iwl_bt_params iwl6000_bt_params = { #define IWL_DEVICE_6005 \ .fw_name_pre = IWL6005_FW_PRE, \ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ + .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ @@ -390,7 +390,7 @@ const struct iwl_cfg iwl6005_2agn_mow2_cfg = { #define IWL_DEVICE_6030 \ .fw_name_pre = IWL6030_FW_PRE, \ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ + .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ -- cgit v1.2.3 From dbdedbdf4fbff3d4962a0786f37aa86dfdc48a7e Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 25 Apr 2012 17:28:00 -0500 Subject: b43: only reload config after successful initialization Commit 2a19032 (b43: reload phy and bss settings after core restarts) introduced an unconditional call to b43_op_config() at the end of b43_op_start(). When firmware fails to load this can wedge the system. There's no need to reload the configuration after a failed initialization anyway, so only make the call if initialization was successful. BugLink: http://bugs.launchpad.net/bugs/950295 Cc: Felix Fietkau Cc: Signed-off-by: Seth Forshee Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index c79e6638c88d..e4d6dc2e37d1 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4827,8 +4827,14 @@ static int b43_op_start(struct ieee80211_hw *hw) out_mutex_unlock: mutex_unlock(&wl->mutex); - /* reload configuration */ - b43_op_config(hw, ~0); + /* + * Configuration may have been overwritten during initialization. + * Reload the configuration, but only if initialization was + * successful. Reloading the configuration after a failed init + * may hang the system. + */ + if (!err) + b43_op_config(hw, ~0); return err; } -- cgit v1.2.3 From 328c32f0f85467af5a6c4c3289e168d9ad2555af Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 26 Apr 2012 23:07:43 +0300 Subject: wl1251: fix crash on remove due to premature kfree Currently SDIO glue frees it's own structure before calling wl1251_free_hw(), which in turn calls ieee80211_unregister_hw(). The later call may result in a need to communicate with the chip to stop it (as it happens now if the interface is still up before rmmod), which means calls are made back to the glue, resulting in freed memory access. Fix this by freeing glue data last. Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Grazvydas Ignotas Signed-off-by: John W. Linville --- drivers/net/wireless/wl1251/sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/wl1251/sdio.c b/drivers/net/wireless/wl1251/sdio.c index f78694295c39..1b851f650e07 100644 --- a/drivers/net/wireless/wl1251/sdio.c +++ b/drivers/net/wireless/wl1251/sdio.c @@ -315,8 +315,8 @@ static void __devexit wl1251_sdio_remove(struct sdio_func *func) if (wl->irq) free_irq(wl->irq, wl); - kfree(wl_sdio); wl1251_free_hw(wl); + kfree(wl_sdio); sdio_claim_host(func); sdio_release_irq(func); -- cgit v1.2.3 From 4c1bcdb5a3354b250b82a67549f57ac27a3bb85f Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 26 Apr 2012 23:07:44 +0300 Subject: wl1251: fix crash on remove due to leftover work item This driver currently leaves elp_work behind when stopping, which occasionally results in data corruption because work function ends up accessing freed memory, typical symptoms of this are various worker_thread crashes. Fix it by cancelling elp_work. Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Grazvydas Ignotas Signed-off-by: John W. Linville --- drivers/net/wireless/wl1251/main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/wl1251/main.c index 41302c7b1ad0..d1afb8e3b2ef 100644 --- a/drivers/net/wireless/wl1251/main.c +++ b/drivers/net/wireless/wl1251/main.c @@ -479,6 +479,7 @@ static void wl1251_op_stop(struct ieee80211_hw *hw) cancel_work_sync(&wl->irq_work); cancel_work_sync(&wl->tx_work); cancel_work_sync(&wl->filter_work); + cancel_delayed_work_sync(&wl->elp_work); mutex_lock(&wl->mutex); -- cgit v1.2.3 From 700698e7c303f5095107c62a81872c2c3dad1702 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Apr 2012 17:18:59 -0400 Subject: drm/radeon/kms: need to set up ss on DP bridges as well Makes Nutmeg DP to VGA bridges work for me. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=42490 Noticed by Jerome Glisse (after weeks of debugging). Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index c5c31e091a92..af1054f8202a 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -958,8 +958,8 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode break; } - if (radeon_encoder->active_device & - (ATOM_DEVICE_LCD_SUPPORT | ATOM_DEVICE_DFP_SUPPORT)) { + if ((radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT | ATOM_DEVICE_DFP_SUPPORT)) || + (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE)) { struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); -- cgit v1.2.3 From 3a69ddd6f872180b6f61fda87152b37202118fbc Mon Sep 17 00:00:00 2001 From: Kenneth Graunke Date: Fri, 27 Apr 2012 12:44:41 -0700 Subject: drm/i915: Set the Stencil Cache eviction policy to non-LRA mode. Clearing bit 5 of CACHE_MODE_0 is necessary to prevent GPU hangs in OpenGL programs such as Google MapsGL, Google Earth, and gzdoom when using separate stencil buffers. Without it, the GPU tries to use the LRA eviction policy, which isn't supported. This was supposed to be off by default, but seems to be on for many machines. This cannot be done in gen6_init_clock_gating with most of the other workaround bits; the render ring needs to exist. Otherwise, the register write gets dropped on the floor (one printk will show it changed, but a second printk immediately following shows the value reverts to the old one). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47535 Cc: stable@vger.kernel.org Cc: Rob Castle Cc: Eric Appleman Cc: aaron667@gmx.net Cc: Keith Packard Signed-off-by: Kenneth Graunke Reviewed-by: Daniel Vetter Acked-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ringbuffer.c | 8 ++++++++ 2 files changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b4bb1ef77ddc..9d24d65f0c3e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -568,6 +568,7 @@ #define CM0_MASK_SHIFT 16 #define CM0_IZ_OPT_DISABLE (1<<6) #define CM0_ZR_OPT_DISABLE (1<<5) +#define CM0_STC_EVICT_DISABLE_LRA_SNB (1<<5) #define CM0_DEPTH_EVICT_DISABLE (1<<4) #define CM0_COLOR_EVICT_DISABLE (1<<3) #define CM0_DEPTH_WRITE_DISABLE (1<<1) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index f75806e5bff5..80fce51e2f43 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -401,6 +401,14 @@ static int init_render_ring(struct intel_ring_buffer *ring) if (INTEL_INFO(dev)->gen >= 6) { I915_WRITE(INSTPM, INSTPM_FORCE_ORDERING << 16 | INSTPM_FORCE_ORDERING); + + /* From the Sandybridge PRM, volume 1 part 3, page 24: + * "If this bit is set, STCunit will have LRA as replacement + * policy. [...] This bit must be reset. LRA replacement + * policy is not supported." + */ + I915_WRITE(CACHE_MODE_0, + CM0_STC_EVICT_DISABLE_LRA_SNB << CM0_MASK_SHIFT); } return ret; -- cgit v1.2.3 From 810b4de25e53459323ff48957b0162b48d6cbd57 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 28 Apr 2012 18:53:49 -0500 Subject: tty/serial/pmac_zilog: Fix "nobody cared" IRQ message Following commit a79dd5a titled "tty/serial/pmac_zilog: Fix suspend & resume", my Powerbook G4 Titanium showed the following stack dump: [ 36.878225] irq 23: nobody cared (try booting with the "irqpoll" option) [ 36.878251] Call Trace: [ 36.878291] [dfff3f00] [c000984c] show_stack+0x7c/0x194 (unreliable) [ 36.878322] [dfff3f40] [c00a6868] __report_bad_irq+0x44/0xf4 [ 36.878339] [dfff3f60] [c00a6b04] note_interrupt+0x1ec/0x2ac [ 36.878356] [dfff3f80] [c00a48d0] handle_irq_event_percpu+0x250/0x2b8 [ 36.878372] [dfff3fd0] [c00a496c] handle_irq_event+0x34/0x54 [ 36.878389] [dfff3fe0] [c00a753c] handle_fasteoi_irq+0xb4/0x124 [ 36.878412] [dfff3ff0] [c000f5bc] call_handle_irq+0x18/0x28 [ 36.878428] [deef1f10] [c000719c] do_IRQ+0x114/0x1cc [ 36.878446] [deef1f40] [c0015868] ret_from_except+0x0/0x1c [ 36.878484] --- Exception: 501 at 0xf497610 [ 36.878489] LR = 0xfdc3dd0 [ 36.878497] handlers: [ 36.878510] [] pmz_interrupt [ 36.878520] Disabling IRQ #23 From an E-mail exchange about this problem, Andreas Schwab noticed a typo that resulted in the wrong condition being tested. The patch also corrects 2 typos that incorrectly report why an error branch is being taken. Signed-off-by: Larry Finger Signed-off-by: Benjamin Herrenschmidt --- drivers/tty/serial/pmac_zilog.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 08ebe901bb59..654755a990df 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -469,7 +469,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id) tty = NULL; if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { if (!ZS_IS_OPEN(uap_a)) { - pmz_debug("ChanA interrupt while open !\n"); + pmz_debug("ChanA interrupt while not open !\n"); goto skip_a; } write_zsreg(uap_a, R0, RES_H_IUS); @@ -493,8 +493,8 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id) spin_lock(&uap_b->port.lock); tty = NULL; if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { - if (!ZS_IS_OPEN(uap_a)) { - pmz_debug("ChanB interrupt while open !\n"); + if (!ZS_IS_OPEN(uap_b)) { + pmz_debug("ChanB interrupt while not open !\n"); goto skip_b; } write_zsreg(uap_b, R0, RES_H_IUS); -- cgit v1.2.3 From 5206b524c9b4e289ab0565e7bffd503d2e671c6e Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 13 Apr 2012 19:22:30 +1000 Subject: drm/nouveau/bios: fix regression on some nv4x board We started using the connector table on nv4x a while back, and this VBIOS has bad connector indices which causes the wrong encoders to get paired with connectors. Add a quirk to fix this... Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 80963d05b54a..0be4a815e706 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -6156,10 +6156,14 @@ dcb_fake_connectors(struct nvbios *bios) /* heuristic: if we ever get a non-zero connector field, assume * that all the indices are valid and we don't need fake them. + * + * and, as usual, a blacklist of boards with bad bios data.. */ - for (i = 0; i < dcbt->entries; i++) { - if (dcbt->entry[i].connector) - return; + if (!nv_match_device(bios->dev, 0x0392, 0x107d, 0x20a2)) { + for (i = 0; i < dcbt->entries; i++) { + if (dcbt->entry[i].connector) + return; + } } /* no useful connector info available, we need to make it up -- cgit v1.2.3 From 0ed4bb92f5514bd1118c5dd537ce424381110286 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 24 Apr 2012 13:26:51 +1000 Subject: drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvac Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_hdmi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_hdmi.c b/drivers/gpu/drm/nouveau/nouveau_hdmi.c index 59ea1c14eca0..c3de36384522 100644 --- a/drivers/gpu/drm/nouveau/nouveau_hdmi.c +++ b/drivers/gpu/drm/nouveau/nouveau_hdmi.c @@ -32,7 +32,9 @@ static bool hdmi_sor(struct drm_encoder *encoder) { struct drm_nouveau_private *dev_priv = encoder->dev->dev_private; - if (dev_priv->chipset < 0xa3) + if (dev_priv->chipset < 0xa3 || + dev_priv->chipset == 0xaa || + dev_priv->chipset == 0xac) return false; return true; } -- cgit v1.2.3 From ffc6a4e49e5bc117aac13ed752cfc018c163e2ac Mon Sep 17 00:00:00 2001 From: Christoph Bumiller Date: Thu, 19 Apr 2012 19:59:20 +0200 Subject: nvc0/fb: shut up PMFB interrupt after the first occurrence Signed-off-by: Christoph Bumiller Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_fb.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvc0_fb.c b/drivers/gpu/drm/nouveau/nvc0_fb.c index 5bf55038fd92..f704e942372e 100644 --- a/drivers/gpu/drm/nouveau/nvc0_fb.c +++ b/drivers/gpu/drm/nouveau/nvc0_fb.c @@ -54,6 +54,11 @@ nvc0_mfb_isr(struct drm_device *dev) nvc0_mfb_subp_isr(dev, unit, subp); units &= ~(1 << unit); } + + /* we do something horribly wrong and upset PMFB a lot, so mask off + * interrupts from it after the first one until it's fixed + */ + nv_mask(dev, 0x000640, 0x02000000, 0x00000000); } static void -- cgit v1.2.3 From b99da31ed8521eb78d5d6930f3128f8ecdb75fae Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 27 Apr 2012 15:11:33 +1000 Subject: drm/nv10/gpio: fix thinko in mask for gpio lines 2-9 Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv10_gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv10_gpio.c b/drivers/gpu/drm/nouveau/nv10_gpio.c index 550ad3fcf0af..9d79180069df 100644 --- a/drivers/gpu/drm/nouveau/nv10_gpio.c +++ b/drivers/gpu/drm/nouveau/nv10_gpio.c @@ -65,7 +65,7 @@ nv10_gpio_drive(struct drm_device *dev, int line, int dir, int out) if (line < 10) { line = (line - 2) * 4; reg = NV_PCRTC_GPIO_EXT; - mask = 0x00000003 << ((line - 2) * 4); + mask = 0x00000003; data = (dir << 1) | out; } else if (line < 14) { -- cgit v1.2.3 From fec6c20b570bcf541e581fc97f2e0cbdb9725b98 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Mon, 30 Apr 2012 16:11:30 -0400 Subject: efi: Validate UEFI boot variables A common flaw in UEFI systems is a refusal to POST triggered by a malformed boot variable. Once in this state, machines may only be restored by reflashing their firmware with an external hardware device. While this is obviously a firmware bug, the serious nature of the outcome suggests that operating systems should filter their variable writes in order to prevent a malicious user from rendering the machine unusable. Signed-off-by: Matthew Garrett Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- drivers/firmware/efivars.c | 182 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 182 insertions(+) (limited to 'drivers') diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index d25599f2a3f8..891e4674d29b 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -191,6 +191,176 @@ utf16_strncmp(const efi_char16_t *a, const efi_char16_t *b, size_t len) } } +static bool +validate_device_path(struct efi_variable *var, int match, u8 *buffer, int len) +{ + struct efi_generic_dev_path *node; + int offset = 0; + + node = (struct efi_generic_dev_path *)buffer; + + while (offset < len) { + offset += node->length; + + if (offset > len) + return false; + + if ((node->type == EFI_DEV_END_PATH || + node->type == EFI_DEV_END_PATH2) && + node->sub_type == EFI_DEV_END_ENTIRE) + return true; + + node = (struct efi_generic_dev_path *)(buffer + offset); + } + + /* + * If we're here then either node->length pointed past the end + * of the buffer or we reached the end of the buffer without + * finding a device path end node. + */ + return false; +} + +static bool +validate_boot_order(struct efi_variable *var, int match, u8 *buffer, int len) +{ + /* An array of 16-bit integers */ + if ((len % 2) != 0) + return false; + + return true; +} + +static bool +validate_load_option(struct efi_variable *var, int match, u8 *buffer, int len) +{ + u16 filepathlength; + int i, desclength = 0; + + /* Either "Boot" or "Driver" followed by four digits of hex */ + for (i = match; i < match+4; i++) { + if (hex_to_bin(var->VariableName[i] & 0xff) < 0) + return true; + } + + /* A valid entry must be at least 6 bytes */ + if (len < 6) + return false; + + filepathlength = buffer[4] | buffer[5] << 8; + + /* + * There's no stored length for the description, so it has to be + * found by hand + */ + desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len) + 2; + + /* Each boot entry must have a descriptor */ + if (!desclength) + return false; + + /* + * If the sum of the length of the description, the claimed filepath + * length and the original header are greater than the length of the + * variable, it's malformed + */ + if ((desclength + filepathlength + 6) > len) + return false; + + /* + * And, finally, check the filepath + */ + return validate_device_path(var, match, buffer + desclength + 6, + filepathlength); +} + +static bool +validate_uint16(struct efi_variable *var, int match, u8 *buffer, int len) +{ + /* A single 16-bit integer */ + if (len != 2) + return false; + + return true; +} + +static bool +validate_ascii_string(struct efi_variable *var, int match, u8 *buffer, int len) +{ + int i; + + for (i = 0; i < len; i++) { + if (buffer[i] > 127) + return false; + + if (buffer[i] == 0) + return true; + } + + return false; +} + +struct variable_validate { + char *name; + bool (*validate)(struct efi_variable *var, int match, u8 *data, + int len); +}; + +static const struct variable_validate variable_validate[] = { + { "BootNext", validate_uint16 }, + { "BootOrder", validate_boot_order }, + { "DriverOrder", validate_boot_order }, + { "Boot*", validate_load_option }, + { "Driver*", validate_load_option }, + { "ConIn", validate_device_path }, + { "ConInDev", validate_device_path }, + { "ConOut", validate_device_path }, + { "ConOutDev", validate_device_path }, + { "ErrOut", validate_device_path }, + { "ErrOutDev", validate_device_path }, + { "Timeout", validate_uint16 }, + { "Lang", validate_ascii_string }, + { "PlatformLang", validate_ascii_string }, + { "", NULL }, +}; + +static bool +validate_var(struct efi_variable *var, u8 *data, int len) +{ + int i; + u16 *unicode_name = var->VariableName; + + for (i = 0; variable_validate[i].validate != NULL; i++) { + const char *name = variable_validate[i].name; + int match; + + for (match = 0; ; match++) { + char c = name[match]; + u16 u = unicode_name[match]; + + /* All special variables are plain ascii */ + if (u > 127) + return true; + + /* Wildcard in the matching name means we've matched */ + if (c == '*') + return variable_validate[i].validate(var, + match, data, len); + + /* Case sensitive match */ + if (c != u) + break; + + /* Reached the end of the string while matching */ + if (!c) + return variable_validate[i].validate(var, + match, data, len); + } + } + + return true; +} + static efi_status_t get_var_data_locked(struct efivars *efivars, struct efi_variable *var) { @@ -324,6 +494,12 @@ efivar_store_raw(struct efivar_entry *entry, const char *buf, size_t count) return -EINVAL; } + if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 || + validate_var(new_var, new_var->Data, new_var->DataSize) == false) { + printk(KERN_ERR "efivars: Malformed variable content\n"); + return -EINVAL; + } + spin_lock(&efivars->lock); status = efivars->ops->set_variable(new_var->VariableName, &new_var->VendorGuid, @@ -626,6 +802,12 @@ static ssize_t efivar_create(struct file *filp, struct kobject *kobj, if (!capable(CAP_SYS_ADMIN)) return -EACCES; + if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 || + validate_var(new_var, new_var->Data, new_var->DataSize) == false) { + printk(KERN_ERR "efivars: Malformed variable content\n"); + return -EINVAL; + } + spin_lock(&efivars->lock); /* -- cgit v1.2.3 From 7bdd305e024d78cfb4f32a1badeb5562791ee5b8 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:50 +0000 Subject: smsc75xx: mark link down on startup and let PHY interrupt deal with carrier changes This patch fixes the same issue as reported on smsc95xx, where the usb device is connected with no ethernet cable plugged-in. Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index a2349483cd2a..b1b4649802aa 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1212,7 +1212,7 @@ static const struct driver_info smsc75xx_info = { .rx_fixup = smsc75xx_rx_fixup, .tx_fixup = smsc75xx_tx_fixup, .status = smsc75xx_status, - .flags = FLAG_ETHER | FLAG_SEND_ZLP, + .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, }; static const struct usb_device_id products[] = { -- cgit v1.2.3 From cb8722d30c20386e4d4b4bc3a2ceceacd35f818a Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:51 +0000 Subject: smsc75xx: fix mdio reads and writes smsc75xx needs MII_ACCESS_BUSY to be set to correctly trigger mdio I/O. Note smsc75xx is different from smsc95xx in this regard. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index b1b4649802aa..f97207a709d6 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -171,7 +171,7 @@ static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx) idx &= dev->mii.reg_num_mask; addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) - | MII_ACCESS_READ; + | MII_ACCESS_READ | MII_ACCESS_BUSY; ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); check_warn_goto_done(ret, "Error writing MII_ACCESS"); @@ -210,7 +210,7 @@ static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx, idx &= dev->mii.reg_num_mask; addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) - | MII_ACCESS_WRITE; + | MII_ACCESS_WRITE | MII_ACCESS_BUSY; ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); check_warn_goto_done(ret, "Error writing MII_ACCESS"); -- cgit v1.2.3 From 4f49add9ad297dab392c14dc60d490364080739b Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:52 +0000 Subject: smsc75xx: add more information to register io failure warnings Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index f97207a709d6..1de778527813 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -98,7 +98,7 @@ static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index, if (unlikely(ret < 0)) netdev_warn(dev->net, - "Failed to read register index 0x%08x", index); + "Failed to read reg index 0x%08x: %d", index, ret); le32_to_cpus(buf); *data = *buf; @@ -128,7 +128,7 @@ static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index, if (unlikely(ret < 0)) netdev_warn(dev->net, - "Failed to write register index 0x%08x", index); + "Failed to write reg index 0x%08x: %d", index, ret); kfree(buf); -- cgit v1.2.3 From 8a1d59d79fffdad4bb1b3b5d069da4c6c52db2e6 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:53 +0000 Subject: smsc75xx: fix phy init reset loop fix bug in phy_init loop that was ignoring BMCR reset bit, akin to smsc95xx's d946092000698fd204d82a9d239103c656fb63bf Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 1de778527813..cc23a589e40f 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -661,7 +661,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR); check_warn_return(bmcr, "Error reading MII_BMCR"); timeout++; - } while ((bmcr & MII_BMCR) && (timeout < 100)); + } while ((bmcr & BMCR_RESET) && (timeout < 100)); if (timeout >= 100) { netdev_warn(dev->net, "timeout on PHY Reset"); -- cgit v1.2.3 From b140504aa3903feaba6f6bc77a4478a944fc12d2 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:54 +0000 Subject: smsc75xx: fix phy interrupt acknowledge smsc75xx phy interrupt acknowledge needs an mdio_write to clear PHY_INT_SRC instead of just a read like in smsc95xx. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index cc23a589e40f..4941782358ef 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -508,9 +508,10 @@ static int smsc75xx_link_reset(struct usbnet *dev) u16 lcladv, rmtadv; int ret; - /* clear interrupt status */ + /* read and write to clear phy interrupt status */ ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC); check_warn_return(ret, "Error reading PHY_INT_SRC"); + smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC, 0xffff); ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); check_warn_return(ret, "Error writing INT_STS"); @@ -643,7 +644,7 @@ static int smsc75xx_set_mac_address(struct usbnet *dev) static int smsc75xx_phy_initialize(struct usbnet *dev) { - int bmcr, timeout = 0; + int bmcr, ret, timeout = 0; /* Initialize MII structure */ dev->mii.dev = dev->net; @@ -672,9 +673,10 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); - /* read to clear */ - smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); - check_warn_return(bmcr, "Error reading PHY_INT_SRC"); + /* read and write to clear phy interrupt status */ + ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); + check_warn_return(ret, "Error reading PHY_INT_SRC"); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff); smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK, PHY_INT_MASK_DEFAULT); -- cgit v1.2.3 From c0b92e4d44ecaab3cd3f09f9f905306a5989b0d4 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:55 +0000 Subject: smsc75xx: declare smsc75xx's MII as GMII capable also explicitly set the phy to advertise 1000 speeds Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 4941782358ef..ae23d85a973a 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -652,6 +652,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) dev->mii.mdio_write = smsc75xx_mdio_write; dev->mii.phy_id_mask = 0x1f; dev->mii.reg_num_mask = 0x1f; + dev->mii.supports_gmii = 1; dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID; /* reset phy and wait for reset to complete */ @@ -672,6 +673,8 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, + ADVERTISE_1000FULL); /* read and write to clear phy interrupt status */ ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); -- cgit v1.2.3 From 2f3a081ea2f63cd5b3e549a0040c760d87483f99 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:56 +0000 Subject: smsc75xx: enable mac to detect speed/duplex from phy This patch sets the automatic speed and duplex detection bits in MAC_CR to enable the mac to determine its speed automatically from the phy. Note this must be done BEFORE the receiver or transmitter is enabled. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index ae23d85a973a..00103a8c5e04 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -951,6 +951,14 @@ static int smsc75xx_reset(struct usbnet *dev) ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf); check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret); + /* allow mac to detect speed and duplex from phy */ + ret = smsc75xx_read_reg(dev, MAC_CR, &buf); + check_warn_return(ret, "Failed to read MAC_CR: %d", ret); + + buf |= (MAC_CR_ADD | MAC_CR_ASD); + ret = smsc75xx_write_reg(dev, MAC_CR, buf); + check_warn_return(ret, "Failed to write MAC_CR: %d", ret); + ret = smsc75xx_read_reg(dev, MAC_TX, &buf); check_warn_return(ret, "Failed to read MAC_TX: %d", ret); -- cgit v1.2.3 From 9bd1be457d2b9568c3c8f8f6b8e450a501bff402 Mon Sep 17 00:00:00 2001 From: Samuel Liao Date: Fri, 27 Apr 2012 17:09:27 +0000 Subject: igbvf: fix the bug when initializing the igbvf Maybe it's a typo, but it cause that igbvf can't be initialized successfully. Set perm_addr value using valid dev_addr, although which is equal to hw.mac.addr. Signed-off-by: Samuel Liao Signed-off-by: Shan Wei Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igbvf/netdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index d61ca2a732f0..8ec74b07f940 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2731,14 +2731,14 @@ static int __devinit igbvf_probe(struct pci_dev *pdev, netdev->addr_len); } - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", netdev->dev_addr); err = -EIO; goto err_hw_init; } - memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); + memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); setup_timer(&adapter->watchdog_timer, &igbvf_watchdog, (unsigned long) adapter); -- cgit v1.2.3 From 2b1588c3fafc3fd2b3bc49202a380eaecbbc2193 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 17 Mar 2012 02:39:16 +0000 Subject: ixgbe: Fix a memory leak in IEEE DCB The driver was freeing memory in shutdown instead of remove. As a result we were leaking memory if IEEE DCB was enabled and we loaded/unloaded the driver. This change moves the freeing of the memory into the remove routine where it belongs. Signed-off-by: Alexander Duyck Acked-by: John Fastabend Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index a7f3cd872caf..88f6b2e9b72d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4873,10 +4873,6 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) } ixgbe_clear_interrupt_scheme(adapter); -#ifdef CONFIG_DCB - kfree(adapter->ixgbe_ieee_pfc); - kfree(adapter->ixgbe_ieee_ets); -#endif #ifdef CONFIG_PM retval = pci_save_state(pdev); @@ -7224,6 +7220,11 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) ixgbe_release_hw_control(adapter); +#ifdef CONFIG_DCB + kfree(adapter->ixgbe_ieee_pfc); + kfree(adapter->ixgbe_ieee_ets); + +#endif iounmap(adapter->hw.hw_addr); pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); -- cgit v1.2.3 From 441e1719f21356ef84d2debc6ca3e6d07e6c8889 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 20 Apr 2012 05:48:08 +0000 Subject: ixgbe: fix calling skb_put on nonlinear skb assertion bug With the support to bounce buffer added, the skb is coming as nonlinear in the case of non-DDPed data frames for FCoE, which is mostly ok as the FCoE stack would take care of that. However, for target mode, we have to set the FC CRC and FC EOF field to allow the protocol stack to not drop the frame for the last data frame of that sequence. So fix this by linearizing the skb first before doing skb_put(). Signed-off-by: Yi Zou Tested-by: Marcus Dennis Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index 77ea4b716535..bc07933d67da 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -437,6 +437,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter, */ if ((fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA) && (fctl & FC_FC_END_SEQ)) { + skb_linearize(skb); crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc)); crc->fcoe_eof = FC_EOF_T; } -- cgit v1.2.3 From 60158e64641fd8c780a6d14de2bf42aabc419916 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 30 Apr 2012 07:15:47 +0000 Subject: cxgb3: Don't call cxgb_vlan_mode until q locks are initialized The driver calls cxgb_vlan_mode() from init_one(). This calls into synchronize_rx(), which locks all the q locks, but the q locks are not initialized until cxgb_up() -> setup_sge_qsets(). So move the call to cxgb_vlan_mode() into cxgb_up(), after the call to setup_sge_qsets(). We also move the body of these functions up higher to avoid having to a forward declaration. This was found because of the lockdep warning: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 323, comm: work_for_cpu Not tainted 3.4.0-rc5 #28 Call Trace: [] register_lock_class+0x108/0x2d0 [] __lock_acquire+0xd3/0xd06 [] lock_acquire+0xbf/0xfe [] _raw_spin_lock_irq+0x36/0x45 [] cxgb_vlan_mode+0x96/0xcb [cxgb3] [] init_one+0x8c4/0x980 [cxgb3] [] local_pci_probe+0x3f/0x70 [] do_work_for_cpu+0x10/0x22 [] kthread+0xa1/0xa9 [] kernel_thread_helper+0x4/0x10 Contrary to what lockdep says, the code is not fine: we are locking an uninitialized spinlock. Signed-off-by: Roland Dreier Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 92 ++++++++++++------------- 1 file changed, 46 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index 63bfdd10bd6d..abb6ce7c1b7e 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -1149,6 +1149,48 @@ release_tpsram: return ret; } +/** + * t3_synchronize_rx - wait for current Rx processing on a port to complete + * @adap: the adapter + * @p: the port + * + * Ensures that current Rx processing on any of the queues associated with + * the given port completes before returning. We do this by acquiring and + * releasing the locks of the response queues associated with the port. + */ +static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p) +{ + int i; + + for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) { + struct sge_rspq *q = &adap->sge.qs[i].rspq; + + spin_lock_irq(&q->lock); + spin_unlock_irq(&q->lock); + } +} + +static void cxgb_vlan_mode(struct net_device *dev, netdev_features_t features) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + if (adapter->params.rev > 0) { + t3_set_vlan_accel(adapter, 1 << pi->port_id, + features & NETIF_F_HW_VLAN_RX); + } else { + /* single control for all ports */ + unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX; + + for_each_port(adapter, i) + have_vlans |= + adapter->port[i]->features & NETIF_F_HW_VLAN_RX; + + t3_set_vlan_accel(adapter, 1, have_vlans); + } + t3_synchronize_rx(adapter, pi); +} + /** * cxgb_up - enable the adapter * @adapter: adapter being enabled @@ -1161,7 +1203,7 @@ release_tpsram: */ static int cxgb_up(struct adapter *adap) { - int err; + int i, err; if (!(adap->flags & FULL_INIT_DONE)) { err = t3_check_fw_version(adap); @@ -1198,6 +1240,9 @@ static int cxgb_up(struct adapter *adap) if (err) goto out; + for_each_port(adap, i) + cxgb_vlan_mode(adap->port[i], adap->port[i]->features); + setup_rss(adap); if (!(adap->flags & NAPI_INIT)) init_napi(adap); @@ -2508,48 +2553,6 @@ static int cxgb_set_mac_addr(struct net_device *dev, void *p) return 0; } -/** - * t3_synchronize_rx - wait for current Rx processing on a port to complete - * @adap: the adapter - * @p: the port - * - * Ensures that current Rx processing on any of the queues associated with - * the given port completes before returning. We do this by acquiring and - * releasing the locks of the response queues associated with the port. - */ -static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p) -{ - int i; - - for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) { - struct sge_rspq *q = &adap->sge.qs[i].rspq; - - spin_lock_irq(&q->lock); - spin_unlock_irq(&q->lock); - } -} - -static void cxgb_vlan_mode(struct net_device *dev, netdev_features_t features) -{ - struct port_info *pi = netdev_priv(dev); - struct adapter *adapter = pi->adapter; - - if (adapter->params.rev > 0) { - t3_set_vlan_accel(adapter, 1 << pi->port_id, - features & NETIF_F_HW_VLAN_RX); - } else { - /* single control for all ports */ - unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX; - - for_each_port(adapter, i) - have_vlans |= - adapter->port[i]->features & NETIF_F_HW_VLAN_RX; - - t3_set_vlan_accel(adapter, 1, have_vlans); - } - t3_synchronize_rx(adapter, pi); -} - static netdev_features_t cxgb_fix_features(struct net_device *dev, netdev_features_t features) { @@ -3353,9 +3356,6 @@ static int __devinit init_one(struct pci_dev *pdev, err = sysfs_create_group(&adapter->port[0]->dev.kobj, &cxgb3_attr_group); - for_each_port(adapter, i) - cxgb_vlan_mode(adapter->port[i], adapter->port[i]->features); - print_port_info(adapter, ai); return 0; -- cgit v1.2.3 From 13176a89e1c4a0011bd9f576730b0338ecb619ff Mon Sep 17 00:00:00 2001 From: Russ Dill Date: Sun, 22 Apr 2012 01:48:18 -0700 Subject: mfd: Fix build breakage in omap-usb-host.c 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' removes the include for linux/gpio.h from omap-usb-host.c. This include indirectly includes plat/cpu.h which is required by omap-usb-host.c. Fix the build breakage by including it directly. Acked-by: Keshava Munegowda Acked-by: Kevin Hilman Tested-by: Arend van Spriel Signed-off-by: Russ Dill Signed-off-by: Samuel Ortiz --- drivers/mfd/omap-usb-host.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index c8aae6640e64..7e96bb229724 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From b704871124b477807966f06789c2b32f2de58bf7 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Mon, 30 Apr 2012 09:18:01 -0400 Subject: hwmon: (coretemp) fix oops on cpu unplug coretemp tries to access core_data array beyond bounds on cpu unplug if core id of the cpu if more than NUM_REAL_CORES-1. BUG: unable to handle kernel NULL pointer dereference at 000000000000013c IP: [] coretemp_cpu_callback+0x93/0x1ba [coretemp] PGD 673e5a067 PUD 66e9b3067 PMD 0 Oops: 0000 [#1] SMP CPU 79 Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter nf_conntrack_ipv4 nf_defrag_ipv4 ip6_tables xt_state nf_conntrack coretemp crc32c_intel asix tpm_tis pcspkr usbnet iTCO_wdt i2c_i801 microcode mii joydev tpm i2c_core iTCO_vendor_support tpm_bios i7core_edac igb ioatdma edac_core dca megaraid_sas [last unloaded: oprofile] Pid: 3315, comm: set-cpus Tainted: G W 3.4.0-rc5+ #2 QCI QSSC-S4R/QSSC-S4R RIP: 0010:[] [] coretemp_cpu_callback+0x93/0x1ba [coretemp] RSP: 0018:ffff880472fb3d48 EFLAGS: 00010246 RAX: 0000000000000124 RBX: 0000000000000034 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000246 RBP: ffff880472fb3d88 R08: ffff88077fcd36c0 R09: 0000000000000001 R10: ffffffff8184bc48 R11: 0000000000000000 R12: ffff880273095800 R13: 0000000000000013 R14: ffff8802730a1810 R15: 0000000000000000 FS: 00007f694a20f720(0000) GS:ffff88077fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000013c CR3: 000000067209b000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process set-cpus (pid: 3315, threadinfo ffff880472fb2000, task ffff880471fa0000) Stack: ffff880277b4c308 0000000000000003 ffff880472fb3d88 0000000000000005 0000000000000034 00000000ffffffd1 ffffffff81cadc70 ffff880472fb3e14 ffff880472fb3dc8 ffffffff8161f48d ffff880471fa0000 0000000000000034 Call Trace: [] notifier_call_chain+0x4d/0x70 [] __raw_notifier_call_chain+0xe/0x10 [] __cpu_notify+0x20/0x40 [] _cpu_down+0x81/0x270 [] cpu_down+0x37/0x50 [] store_online+0x63/0xc0 [] dev_attr_store+0x18/0x30 [] sysfs_write_file+0xef/0x170 [] vfs_write+0xb3/0x180 [] sys_write+0x4a/0x90 [] system_call_fastpath+0x16/0x1b Code: 48 c7 c7 94 60 01 a0 44 0f b7 ac 10 ac 00 00 00 31 c0 e8 41 b7 5f e1 41 83 c5 02 49 63 c5 49 8b 44 c4 10 48 85 c0 74 56 45 31 ff <39> 58 18 75 4e eb 1f 49 63 d7 4c 89 f7 48 89 45 c8 48 6b d2 28 RIP [] coretemp_cpu_callback+0x93/0x1ba [coretemp] RSP CR2: 000000000000013c Signed-off-by: Kirill A. Shutemov Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck --- drivers/hwmon/coretemp.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 0d3141fbbc20..54a70fe12441 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -709,6 +709,10 @@ static void __cpuinit put_core_offline(unsigned int cpu) indx = TO_ATTR_NO(cpu); + /* The core id is too big, just return */ + if (indx > MAX_CORE_DATA - 1) + return; + if (pdata->core_data[indx] && pdata->core_data[indx]->cpu == cpu) coretemp_remove_core(pdata, &pdev->dev, indx); -- cgit v1.2.3 From bdc71c9a87b898e4c380c23b2e3e18071312ecde Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 1 May 2012 08:15:42 -0700 Subject: hwmon: (coretemp) Increase CPU core limit CPU core ID is used to index the core_data[] array. The core ID is, however, not sequential; 10-core CPUS can have a core ID as high as 25. Increase the limit to 32 to be able to deal with current CPUs. Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare Acked-by: Durgadoss R --- drivers/hwmon/coretemp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 54a70fe12441..b9d512331ed4 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -52,7 +52,7 @@ module_param_named(tjmax, force_tjmax, int, 0444); MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius"); #define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */ -#define NUM_REAL_CORES 16 /* Number of Real cores per cpu */ +#define NUM_REAL_CORES 32 /* Number of Real cores per cpu */ #define CORETEMP_NAME_LENGTH 17 /* String Length of attrs */ #define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */ #define TOTAL_ATTRS (MAX_CORE_ATTRS + 1) -- cgit v1.2.3 From 3f42941b5d1d13542b1a755a9e4f633aa72e4d3e Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 30 Apr 2012 05:49:45 +0000 Subject: sky2: propogate rx hash when packet is copied When a small packet is received, the driver copies it to a new skb to allow reusing the full size Rx buffer. The copy was propogating the checksum offload but not the receive hash information. The bug is impact was mostly harmless and therefore not observed until reviewing this area of code. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index c9b504e2dfc3..0ced3117abc6 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -2494,8 +2494,11 @@ static struct sk_buff *receive_copy(struct sky2_port *sky2, skb_copy_from_linear_data(re->skb, skb->data, length); skb->ip_summed = re->skb->ip_summed; skb->csum = re->skb->csum; + skb->rxhash = re->skb->rxhash; + pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, length, PCI_DMA_FROMDEVICE); + re->skb->rxhash = 0; re->skb->ip_summed = CHECKSUM_NONE; skb_put(skb, length); } -- cgit v1.2.3 From e072b3fad5f3915102c94628b4971f52ff99dd05 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 30 Apr 2012 06:47:37 +0000 Subject: sky2: fix receive length error in mixed non-VLAN/VLAN traffic Bug: The VLAN bit of the MAC RX Status Word is unreliable in several older supported chips. Sometimes the VLAN bit is not set for valid VLAN packets and also sometimes the VLAN bit is set for non-VLAN packets that came after a VLAN packet. This results in a receive length error when VLAN hardware tagging is enabled. Fix: Variation on original fix proposed by Mirko. The VLAN information is decoded in the status loop, and can be applied to the received SKB there. This eliminates the need for the separate tag field in the interface data structure. The tag has to be copied and cleared if packet is copied. This version checked out with vlan and normal traffic. Note: vlan_tx_tag_present should be renamed vlan_tag_present, but that is outside scope of this. Reported-by: Mirko Lindner Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 28 +++++++++++++++++----------- drivers/net/ethernet/marvell/sky2.h | 1 - 2 files changed, 17 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 0ced3117abc6..487a6c8bd4ec 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -2495,9 +2495,11 @@ static struct sk_buff *receive_copy(struct sky2_port *sky2, skb->ip_summed = re->skb->ip_summed; skb->csum = re->skb->csum; skb->rxhash = re->skb->rxhash; + skb->vlan_tci = re->skb->vlan_tci; pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, length, PCI_DMA_FROMDEVICE); + re->skb->vlan_tci = 0; re->skb->rxhash = 0; re->skb->ip_summed = CHECKSUM_NONE; skb_put(skb, length); @@ -2583,9 +2585,6 @@ static struct sk_buff *sky2_receive(struct net_device *dev, struct sk_buff *skb = NULL; u16 count = (status & GMR_FS_LEN) >> 16; - if (status & GMR_FS_VLAN) - count -= VLAN_HLEN; /* Account for vlan tag */ - netif_printk(sky2, rx_status, KERN_DEBUG, dev, "rx slot %u status 0x%x len %d\n", sky2->rx_next, status, length); @@ -2593,6 +2592,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev, sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; prefetch(sky2->rx_ring + sky2->rx_next); + if (vlan_tx_tag_present(re->skb)) + count -= VLAN_HLEN; /* Account for vlan tag */ + /* This chip has hardware problems that generates bogus status. * So do only marginal checking and expect higher level protocols * to handle crap frames. @@ -2650,11 +2652,8 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) } static inline void sky2_skb_rx(const struct sky2_port *sky2, - u32 status, struct sk_buff *skb) + struct sk_buff *skb) { - if (status & GMR_FS_VLAN) - __vlan_hwaccel_put_tag(skb, be16_to_cpu(sky2->rx_tag)); - if (skb->ip_summed == CHECKSUM_NONE) netif_receive_skb(skb); else @@ -2708,6 +2707,14 @@ static void sky2_rx_checksum(struct sky2_port *sky2, u32 status) } } +static void sky2_rx_tag(struct sky2_port *sky2, u16 length) +{ + struct sk_buff *skb; + + skb = sky2->rx_ring[sky2->rx_next].skb; + __vlan_hwaccel_put_tag(skb, be16_to_cpu(length)); +} + static void sky2_rx_hash(struct sky2_port *sky2, u32 status) { struct sk_buff *skb; @@ -2766,8 +2773,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) } skb->protocol = eth_type_trans(skb, dev); - - sky2_skb_rx(sky2, status, skb); + sky2_skb_rx(sky2, skb); /* Stop after net poll weight */ if (++work_done >= to_do) @@ -2775,11 +2781,11 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) break; case OP_RXVLAN: - sky2->rx_tag = length; + sky2_rx_tag(sky2, length); break; case OP_RXCHKSVLAN: - sky2->rx_tag = length; + sky2_rx_tag(sky2, length); /* fall through */ case OP_RXCHKS: if (likely(dev->features & NETIF_F_RXCSUM)) diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h index ff6f58bf822a..3c896ce80b71 100644 --- a/drivers/net/ethernet/marvell/sky2.h +++ b/drivers/net/ethernet/marvell/sky2.h @@ -2241,7 +2241,6 @@ struct sky2_port { u16 rx_pending; u16 rx_data_size; u16 rx_nfrags; - u16 rx_tag; struct { unsigned long last; -- cgit v1.2.3 From 84f904ecd3aa2ccb5779b815b69c1cb592f07bb5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 May 2012 16:12:19 +0100 Subject: vt: Fix deadlock on scroll-lock Fixing the locking accidentally replaced a race in the scroll lock handling with a deadlock. Turn it back into a race for now. The basic problem is that there are two paths into the tty stop/start helpers. One via the tty layer ^S/^Q handling where we need to take the kbd_event_lock and one via the special keyboard handler for fn_hold where we already hold it. Probably we need to split out into a separate LED lock but for now just go back to the race as it's a bit close to release. Reported-by: Clemens Ladisch Cc: Jiri Kosina Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/keyboard.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 86dd1e302bb3..29ca20dbd335 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -1085,15 +1085,21 @@ void vt_set_led_state(int console, int leds) * * Handle console start. This is a wrapper for the VT layer * so that we can keep kbd knowledge internal + * + * FIXME: We eventually need to hold the kbd lock here to protect + * the LED updating. We can't do it yet because fn_hold calls stop_tty + * and start_tty under the kbd_event_lock, while normal tty paths + * don't hold the lock. We probably need to split out an LED lock + * but not during an -rc release! */ void vt_kbd_con_start(int console) { struct kbd_struct * kbd = kbd_table + console; - unsigned long flags; - spin_lock_irqsave(&kbd_event_lock, flags); +/* unsigned long flags; */ +/* spin_lock_irqsave(&kbd_event_lock, flags); */ clr_vc_kbd_led(kbd, VC_SCROLLOCK); set_leds(); - spin_unlock_irqrestore(&kbd_event_lock, flags); +/* spin_unlock_irqrestore(&kbd_event_lock, flags); */ } /** @@ -1102,22 +1108,28 @@ void vt_kbd_con_start(int console) * * Handle console stop. This is a wrapper for the VT layer * so that we can keep kbd knowledge internal + * + * FIXME: We eventually need to hold the kbd lock here to protect + * the LED updating. We can't do it yet because fn_hold calls stop_tty + * and start_tty under the kbd_event_lock, while normal tty paths + * don't hold the lock. We probably need to split out an LED lock + * but not during an -rc release! */ void vt_kbd_con_stop(int console) { struct kbd_struct * kbd = kbd_table + console; - unsigned long flags; - spin_lock_irqsave(&kbd_event_lock, flags); +/* unsigned long flags; */ +/* spin_lock_irqsave(&kbd_event_lock, flags); */ set_vc_kbd_led(kbd, VC_SCROLLOCK); set_leds(); - spin_unlock_irqrestore(&kbd_event_lock, flags); +/* spin_unlock_irqrestore(&kbd_event_lock, flags); */ } /* * This is the tasklet that updates LED state on all keyboards * attached to the box. The reason we use tasklet is that we * need to handle the scenario when keyboard handler is not - * registered yet but we already getting updates form VT to + * registered yet but we already getting updates from the VT to * update led state. */ static void kbd_bh(unsigned long dummy) -- cgit v1.2.3 From ebf20de453042c066a289b90dd14d59de03dba2f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 1 May 2012 11:28:49 -0400 Subject: EHCI: update PM methods in ehci-tegra.c This patch (as1547) rearranges the Power Management parts of the ehci-tegra driver to match the conventions used in other EHCI platform drivers. In particular, the controller should not be powered down by the root hub's suspend routine; the controller's power level should be managed by the controller's own PM methods. The end result of the patch is that the standard ehci_bus_suspend() and ehci_bus_resume() methods can be used instead of special-purpose routines. The driver now uses the standard dev_pm_ops methods instead of legacy power management. Since there is no supported wakeup mechanism for the controller, runtime suspend is forbidden by default (this can be overridden via sysfs, if desired). These adjustments are needed in order to make ehci-tegra compatible with recent changes to the USB core. The core now checks the root hub's status following bus suspend; if the controller is automatically powered down during bus suspend then the check will fail and the root hub will be resumed immediately. Doing the controller power-down in a separate method avoids this problem. Signed-off-by: Alan Stern Acked-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 375 ++++++++++++++++++++++-------------------- 1 file changed, 195 insertions(+), 180 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 86183366647f..73f3525e6921 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -37,9 +38,7 @@ struct tegra_ehci_hcd { struct clk *emc_clk; struct usb_phy *transceiver; int host_resumed; - int bus_suspended; int port_resuming; - int power_down_on_bus_suspend; enum tegra_usb_phy_port_speed port_speed; }; @@ -273,120 +272,6 @@ static void tegra_ehci_restart(struct usb_hcd *hcd) up_write(&ehci_cf_port_reset_rwsem); } -static int tegra_usb_suspend(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - struct ehci_regs __iomem *hw = tegra->ehci->regs; - unsigned long flags; - - spin_lock_irqsave(&tegra->ehci->lock, flags); - - tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; - ehci_halt(tegra->ehci); - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - spin_unlock_irqrestore(&tegra->ehci->lock, flags); - - tegra_ehci_power_down(hcd); - return 0; -} - -static int tegra_usb_resume(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - struct ehci_regs __iomem *hw = ehci->regs; - unsigned long val; - - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - tegra_ehci_power_up(hcd); - - if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { - /* Wait for the phy to detect new devices - * before we restart the controller */ - msleep(10); - goto restart; - } - - /* Force the phy to keep data lines in suspend state */ - tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); - - /* Enable host mode */ - tdi_reset(ehci); - - /* Enable Port Power */ - val = readl(&hw->port_status[0]); - val |= PORT_POWER; - writel(val, &hw->port_status[0]); - udelay(10); - - /* Check if the phy resume from LP0. When the phy resume from LP0 - * USB register will be reset. */ - if (!readl(&hw->async_next)) { - /* Program the field PTC based on the saved speed mode */ - val = readl(&hw->port_status[0]); - val &= ~PORT_TEST(~0); - if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) - val |= PORT_TEST_FORCE; - else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) - val |= PORT_TEST(6); - else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) - val |= PORT_TEST(7); - writel(val, &hw->port_status[0]); - udelay(10); - - /* Disable test mode by setting PTC field to NORMAL_OP */ - val = readl(&hw->port_status[0]); - val &= ~PORT_TEST(~0); - writel(val, &hw->port_status[0]); - udelay(10); - } - - /* Poll until CCS is enabled */ - if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, - PORT_CONNECT, 2000)) { - pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); - goto restart; - } - - /* Poll until PE is enabled */ - if (handshake(ehci, &hw->port_status[0], PORT_PE, - PORT_PE, 2000)) { - pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); - goto restart; - } - - /* Clear the PCI status, to avoid an interrupt taken upon resume */ - val = readl(&hw->status); - val |= STS_PCD; - writel(val, &hw->status); - - /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ - val = readl(&hw->port_status[0]); - if ((val & PORT_POWER) && (val & PORT_PE)) { - val |= PORT_SUSPEND; - writel(val, &hw->port_status[0]); - - /* Wait until port suspend completes */ - if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, - PORT_SUSPEND, 1000)) { - pr_err("%s: timeout waiting for PORT_SUSPEND\n", - __func__); - goto restart; - } - } - - tegra_ehci_phy_restore_end(tegra->phy); - return 0; - -restart: - if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) - tegra_ehci_phy_restore_end(tegra->phy); - - tegra_ehci_restart(hcd); - return 0; -} - static void tegra_ehci_shutdown(struct usb_hcd *hcd) { struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); @@ -434,36 +319,6 @@ static int tegra_ehci_setup(struct usb_hcd *hcd) return retval; } -#ifdef CONFIG_PM -static int tegra_ehci_bus_suspend(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - int error_status = 0; - - error_status = ehci_bus_suspend(hcd); - if (!error_status && tegra->power_down_on_bus_suspend) { - tegra_usb_suspend(hcd); - tegra->bus_suspended = 1; - } - - return error_status; -} - -static int tegra_ehci_bus_resume(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - - if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) { - tegra_usb_resume(hcd); - tegra->bus_suspended = 0; - } - - tegra_usb_phy_preresume(tegra->phy); - tegra->port_resuming = 1; - return ehci_bus_resume(hcd); -} -#endif - struct temp_buffer { void *kmalloc_ptr; void *old_xfer_buffer; @@ -574,8 +429,8 @@ static const struct hc_driver tegra_ehci_hc_driver = { .hub_control = tegra_ehci_hub_control, .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, #ifdef CONFIG_PM - .bus_suspend = tegra_ehci_bus_suspend, - .bus_resume = tegra_ehci_bus_resume, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, @@ -608,6 +463,183 @@ static int setup_vbus_gpio(struct platform_device *pdev) return err; } +#ifdef CONFIG_PM + +static int controller_suspend(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct ehci_hcd *ehci = tegra->ehci; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long flags; + + if (time_before(jiffies, ehci->next_statechange)) + msleep(10); + + spin_lock_irqsave(&ehci->lock, flags); + + tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; + ehci_halt(ehci); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + spin_unlock_irqrestore(&ehci->lock, flags); + + tegra_ehci_power_down(hcd); + return 0; +} + +static int controller_resume(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct ehci_hcd *ehci = tegra->ehci; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long val; + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + tegra_ehci_power_up(hcd); + + if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { + /* Wait for the phy to detect new devices + * before we restart the controller */ + msleep(10); + goto restart; + } + + /* Force the phy to keep data lines in suspend state */ + tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); + + /* Enable host mode */ + tdi_reset(ehci); + + /* Enable Port Power */ + val = readl(&hw->port_status[0]); + val |= PORT_POWER; + writel(val, &hw->port_status[0]); + udelay(10); + + /* Check if the phy resume from LP0. When the phy resume from LP0 + * USB register will be reset. */ + if (!readl(&hw->async_next)) { + /* Program the field PTC based on the saved speed mode */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) + val |= PORT_TEST_FORCE; + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) + val |= PORT_TEST(6); + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) + val |= PORT_TEST(7); + writel(val, &hw->port_status[0]); + udelay(10); + + /* Disable test mode by setting PTC field to NORMAL_OP */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + writel(val, &hw->port_status[0]); + udelay(10); + } + + /* Poll until CCS is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, + PORT_CONNECT, 2000)) { + pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); + goto restart; + } + + /* Poll until PE is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_PE, + PORT_PE, 2000)) { + pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); + goto restart; + } + + /* Clear the PCI status, to avoid an interrupt taken upon resume */ + val = readl(&hw->status); + val |= STS_PCD; + writel(val, &hw->status); + + /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ + val = readl(&hw->port_status[0]); + if ((val & PORT_POWER) && (val & PORT_PE)) { + val |= PORT_SUSPEND; + writel(val, &hw->port_status[0]); + + /* Wait until port suspend completes */ + if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, + PORT_SUSPEND, 1000)) { + pr_err("%s: timeout waiting for PORT_SUSPEND\n", + __func__); + goto restart; + } + } + + tegra_ehci_phy_restore_end(tegra->phy); + goto done; + + restart: + if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) + tegra_ehci_phy_restore_end(tegra->phy); + + tegra_ehci_restart(hcd); + + done: + tegra_usb_phy_preresume(tegra->phy); + tegra->port_resuming = 1; + return 0; +} + +static int tegra_ehci_suspend(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + int rc = 0; + + /* + * When system sleep is supported and USB controller wakeup is + * implemented: If the controller is runtime-suspended and the + * wakeup setting needs to be changed, call pm_runtime_resume(). + */ + if (HCD_HW_ACCESSIBLE(hcd)) + rc = controller_suspend(dev); + return rc; +} + +static int tegra_ehci_resume(struct device *dev) +{ + int rc; + + rc = controller_resume(dev); + if (rc == 0) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + return rc; +} + +static int tegra_ehci_runtime_suspend(struct device *dev) +{ + return controller_suspend(dev); +} + +static int tegra_ehci_runtime_resume(struct device *dev) +{ + return controller_resume(dev); +} + +static const struct dev_pm_ops tegra_ehci_pm_ops = { + .suspend = tegra_ehci_suspend, + .resume = tegra_ehci_resume, + .runtime_suspend = tegra_ehci_runtime_suspend, + .runtime_resume = tegra_ehci_runtime_resume, +}; + +#endif + static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32); static int tegra_ehci_probe(struct platform_device *pdev) @@ -722,7 +754,6 @@ static int tegra_ehci_probe(struct platform_device *pdev) } tegra->host_resumed = 1; - tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend; tegra->ehci = hcd_to_ehci(hcd); irq = platform_get_irq(pdev, 0); @@ -746,6 +777,14 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto fail; } + pm_runtime_set_active(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + + /* Don't skip the pm_runtime_forbid call if wakeup isn't working */ + /* if (!pdata->power_down_on_bus_suspend) */ + pm_runtime_forbid(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); return err; fail: @@ -772,33 +811,6 @@ fail_hcd: return err; } -#ifdef CONFIG_PM -static int tegra_ehci_resume(struct platform_device *pdev) -{ - struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); - - if (tegra->bus_suspended) - return 0; - - return tegra_usb_resume(hcd); -} - -static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); - - if (tegra->bus_suspended) - return 0; - - if (time_before(jiffies, tegra->ehci->next_statechange)) - msleep(10); - - return tegra_usb_suspend(hcd); -} -#endif - static int tegra_ehci_remove(struct platform_device *pdev) { struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); @@ -807,6 +819,10 @@ static int tegra_ehci_remove(struct platform_device *pdev) if (tegra == NULL || hcd == NULL) return -EINVAL; + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + #ifdef CONFIG_USB_OTG_UTILS if (tegra->transceiver) { otg_set_host(tegra->transceiver->otg, NULL); @@ -847,13 +863,12 @@ static struct of_device_id tegra_ehci_of_match[] __devinitdata = { static struct platform_driver tegra_ehci_driver = { .probe = tegra_ehci_probe, .remove = tegra_ehci_remove, -#ifdef CONFIG_PM - .suspend = tegra_ehci_suspend, - .resume = tegra_ehci_resume, -#endif .shutdown = tegra_ehci_hcd_shutdown, .driver = { .name = "tegra-ehci", .of_match_table = tegra_ehci_of_match, +#ifdef CONFIG_PM + .pm = &tegra_ehci_pm_ops, +#endif } }; -- cgit v1.2.3 From 04c235c92ce8474e9f2b358bd97f013a500385f2 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 30 Apr 2012 17:24:10 -0600 Subject: USB: ehci-tegra: remove redundant gpio_set_value The immediately preceding gpio_direction_output() already set the value, so there's no need to repeat it. This also prevents gpio_set_value() from WARNing when the GPIO is sleepable (e.g. is on an I2C expander); the set direction API is always sleepable, but plain set_value isn't. Cc: # v3.3 Signed-off-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 73f3525e6921..f214a80cdee2 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -458,7 +458,6 @@ static int setup_vbus_gpio(struct platform_device *pdev) dev_err(&pdev->dev, "can't enable vbus\n"); return err; } - gpio_set_value(gpio, 1); return err; } -- cgit v1.2.3 From cf04317227d0c53d931a0b963e7ac6f7f0125e8a Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Mon, 30 Apr 2012 11:43:07 -0700 Subject: brcmfmac: fix a double spin_unlock_irqrestore issue in dpc dpc_tl_lock is not acquired in the error handle code for bus down. But it's unlocked using spin_unlock_irqrestore after finishing task list walk down. Grab the lock before breaking the loop to avoid a double unlock. Reported-by: Dan Carpenter Signed-off-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index eb3829b03cd3..e2b34e1563f4 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -2637,6 +2637,7 @@ static int brcmf_sdbrcm_dpc_thread(void *data) /* after stopping the bus, exit thread */ brcmf_sdbrcm_bus_stop(bus->sdiodev->dev); bus->dpc_tsk = NULL; + spin_lock_irqsave(&bus->dpc_tl_lock, flags); break; } -- cgit v1.2.3 From 9d1ceac5c6f7e77ea914de376ec17ced3eb22e5f Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Tue, 1 May 2012 09:12:24 +0530 Subject: Revert "ath9k_hw: Fix incorrect spur_freq_sd for AR9003" This reverts commit a844adfd7bee4edc66d337de6c33b348e83552a8. The commit a844adfd is degrading rx sensitivity of lower rate in HT40 mode and it is confirmed that reverting the change is improving rx sensitivity. spur_freq_sd (for self-corr in AGC) is defined with respect to the center of each 20MHz channel while spur_phase_delta (for self-corr in Rx and spur data filter) is defined with respect to the center of current RF channel. So in short, we need to subtract spur_freq_sd (for self-corr in AGC) by the offset between the center of primary20 and the center of RF channel in SW. This offset could be +/10 MHz for dynamic 40. Cc: Madhan Jaganathan Signed-off-by: Kai Shi Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index deb6cfb2959a..600aca9fe6b1 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -373,7 +373,7 @@ static void ar9003_hw_spur_ofdm_work(struct ath_hw *ah, else spur_subchannel_sd = 0; - spur_freq_sd = (freq_offset << 9) / 11; + spur_freq_sd = ((freq_offset + 10) << 9) / 11; } else { if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL, @@ -382,7 +382,7 @@ static void ar9003_hw_spur_ofdm_work(struct ath_hw *ah, else spur_subchannel_sd = 1; - spur_freq_sd = (freq_offset << 9) / 11; + spur_freq_sd = ((freq_offset - 10) << 9) / 11; } -- cgit v1.2.3 From 5bbdc057c270cc0d672ead03320ed8d7a11bac03 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Sun, 29 Apr 2012 22:36:54 +0000 Subject: net: ucc_geth, increase no. of HW RX descriptors In a busy network we see ucc_geth is dropping RX pkgs every now and then. Increase the RX queues HW descriptors from 16 to 32 to deal with this. Signed-off-by: Joakim Tjernlund Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/ucc_geth.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h index 2e395a2566b8..f71b3e7b12de 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.h +++ b/drivers/net/ethernet/freescale/ucc_geth.h @@ -877,7 +877,7 @@ struct ucc_geth_hardware_statistics { /* Driver definitions */ #define TX_BD_RING_LEN 0x10 -#define RX_BD_RING_LEN 0x10 +#define RX_BD_RING_LEN 0x20 #define TX_RING_MOD_MASK(size) (size-1) #define RX_RING_MOD_MASK(size) (size-1) -- cgit v1.2.3 From 70f8002d7813ffc5dd9ff3e9d01a17794fb4a4df Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Sun, 29 Apr 2012 22:36:55 +0000 Subject: ucc_geth: Add 16 bytes to max TX frame for VLANs Creating a VLAN interface on top of ucc_geth adds 4 bytes to the frame and the HW controller is not prepared to TX a frame bigger than 1518 bytes which is 4 bytes too small for a full VLAN frame. Add 16 bytes which will handle the a simple VLAN and leaves 12 bytes for future expansion. Signed-off-by: Joakim Tjernlund Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/ucc_geth.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 17a46e76123f..9ac14f804851 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -116,10 +116,10 @@ static struct ucc_geth_info ugeth_primary_info = { .maxGroupAddrInHash = 4, .maxIndAddrInHash = 4, .prel = 7, - .maxFrameLength = 1518, + .maxFrameLength = 1518+16, /* Add extra bytes for VLANs etc. */ .minFrameLength = 64, - .maxD1Length = 1520, - .maxD2Length = 1520, + .maxD1Length = 1520+16, /* Add extra bytes for VLANs etc. */ + .maxD2Length = 1520+16, /* Add extra bytes for VLANs etc. */ .vlantype = 0x8100, .ecamptr = ((uint32_t) NULL), .eventRegMask = UCCE_OTHER, -- cgit v1.2.3 From 720f3d7cb19eb27f85f72836c8f8004ccb257f39 Mon Sep 17 00:00:00 2001 From: "tom.leiming@gmail.com" Date: Sun, 29 Apr 2012 22:51:02 +0000 Subject: usbnet: fix leak of transfer buffer of dev->interrupt The transfer buffer of dev->interrupt is allocated in .probe path, but not freed in .disconnet path, so mark the interrupt URB as URB_FREE_BUFFER to free the buffer when the URB is destroyed. Signed-off-by: Ming Lei Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index b7b3f5b0d406..ca6fd80c2b40 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -210,6 +210,7 @@ static int init_status (struct usbnet *dev, struct usb_interface *intf) } else { usb_fill_int_urb(dev->interrupt, dev->udev, pipe, buf, maxp, intr_complete, dev, period); + dev->interrupt->transfer_flags |= URB_FREE_BUFFER; dev_dbg(&intf->dev, "status ep%din, %d bytes period %d\n", usb_pipeendpoint(pipe), maxp, period); -- cgit v1.2.3 From a4723848d05dd31d298c551fb77ad28481309999 Mon Sep 17 00:00:00 2001 From: "tom.leiming@gmail.com" Date: Sun, 29 Apr 2012 22:51:03 +0000 Subject: usbnet: fix failure handling in usbnet_probe If register_netdev returns failure, the dev->interrupt and its transfer buffer should be released, so just fix it. Signed-off-by: Ming Lei Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index ca6fd80c2b40..2d927fb4adf4 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1444,7 +1444,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) status = register_netdev (net); if (status) - goto out3; + goto out4; netif_info(dev, probe, dev->net, "register '%s' at usb-%s-%s, %s, %pM\n", udev->dev.driver->name, @@ -1462,6 +1462,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) return 0; +out4: + usb_free_urb(dev->interrupt); out3: if (info->unbind) info->unbind (dev, udev); -- cgit v1.2.3 From 5a8887d39e1ba5ee2d4ccb94b14d6f2dce5ddfca Mon Sep 17 00:00:00 2001 From: Gerard Lledo Date: Sat, 28 Apr 2012 08:52:37 +0000 Subject: sungem: Fix WakeOnLan WakeOnLan was broken in this driver because gp->asleep_wol is a 1-bit bitfield and it was being assigned WAKE_MAGIC, which is (1 << 5). gp->asleep_wol remains 0 and the machine never wakes up. Fixed by casting gp->wake_on_lan to bool. Tested on an iBook G4. Signed-off-by: Gerard Lledo Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sungem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c index 558409ff4058..4ba969096717 100644 --- a/drivers/net/ethernet/sun/sungem.c +++ b/drivers/net/ethernet/sun/sungem.c @@ -2339,7 +2339,7 @@ static int gem_suspend(struct pci_dev *pdev, pm_message_t state) netif_device_detach(dev); /* Switch off chip, remember WOL setting */ - gp->asleep_wol = gp->wake_on_lan; + gp->asleep_wol = !!gp->wake_on_lan; gem_do_stop(dev, gp->asleep_wol); /* Unlock the network stack */ -- cgit v1.2.3 From addde4ec31456c5f1e9b61aae3edcfeb0f338f87 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 2 May 2012 20:26:24 +0100 Subject: nouveau: initialise has_optimus variable. We should initialise this to 0 really to avoid getting false positives. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index 7814a760c164..284bd25d5d21 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -270,7 +270,7 @@ static bool nouveau_dsm_detect(void) struct acpi_buffer buffer = {sizeof(acpi_method_name), acpi_method_name}; struct pci_dev *pdev = NULL; int has_dsm = 0; - int has_optimus; + int has_optimus = 0; int vga_count = 0; bool guid_valid; int retval; -- cgit v1.2.3 From ab6039a70bb559b2fb5f363934da67d864ccda2a Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Sat, 17 Mar 2012 05:51:52 +0000 Subject: ixgbe: fix race condition with shutdown It was possible for shutdown to pull the rug out from other driver entry points. Now we just grab the rtnl lock before taking everything apart. Thanks to Hariharan for noticing this tight race condition. Signed-off-by: Don Skidmore Cc: Hariharan Nagarajan Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 88f6b2e9b72d..d9dbf871abb8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4866,10 +4866,12 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) netif_device_detach(netdev); if (netif_running(netdev)) { + rtnl_lock(); ixgbe_down(adapter); ixgbe_free_irq(adapter); ixgbe_free_all_tx_resources(adapter); ixgbe_free_all_rx_resources(adapter); + rtnl_unlock(); } ixgbe_clear_interrupt_scheme(adapter); -- cgit v1.2.3 From f525c6d29501eb483f2d6f742d2f1dc0452b924d Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 18 Apr 2012 22:42:27 +0000 Subject: ixgbe: dcb: BIT_APP_UPCHG not set by ixgbe_copy_dcb_cfg() After this commit: commit aacc1bea190d731755a65cb8ec31dd756f4e263e Author: Multanen, Eric W Date: Wed Mar 28 07:49:09 2012 +0000 ixgbe: driver fix for link flap The BIT_APP_UPCHG bit is no longer set when ixgbe_dcbnl_set_all() is called. This results in the FCoE app user priority never getting set and the driver will not configure the tx_rings correctly for FCoE packets which use the SAN MTU and FCoE offloads. We resolve this regression by fixing ixgbe_copy_dcb_cfg() to also check for FCoE application changes. Additionally, we can drop the IEEE variants of get_dcb_app() because this path is never called with the IEEE mode enabled. Signed-off-by: John Fastabend Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe.h | 3 -- drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c | 43 ++++++++++++------------- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 +-- 3 files changed, 22 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 74e192107f9a..81b155589532 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -574,9 +574,6 @@ extern struct ixgbe_info ixgbe_82599_info; extern struct ixgbe_info ixgbe_X540_info; #ifdef CONFIG_IXGBE_DCB extern const struct dcbnl_rtnl_ops dcbnl_ops; -extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg, - struct ixgbe_dcb_config *dst_dcb_cfg, - int tc_max); #endif extern char ixgbe_driver_name[]; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index 652e4b09546d..32e5c02ff6d0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -44,18 +44,26 @@ #define DCB_NO_HW_CHG 1 /* DCB configuration did not change */ #define DCB_HW_CHG 2 /* DCB configuration changed, no reset */ -int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *scfg, - struct ixgbe_dcb_config *dcfg, int tc_max) +static int ixgbe_copy_dcb_cfg(struct ixgbe_adapter *adapter, int tc_max) { + struct ixgbe_dcb_config *scfg = &adapter->temp_dcb_cfg; + struct ixgbe_dcb_config *dcfg = &adapter->dcb_cfg; struct tc_configuration *src = NULL; struct tc_configuration *dst = NULL; int i, j; int tx = DCB_TX_CONFIG; int rx = DCB_RX_CONFIG; int changes = 0; +#ifdef IXGBE_FCOE + struct dcb_app app = { + .selector = DCB_APP_IDTYPE_ETHTYPE, + .protocol = ETH_P_FCOE, + }; + u8 up = dcb_getapp(adapter->netdev, &app); - if (!scfg || !dcfg) - return changes; + if (up && !(up & (1 << adapter->fcoe.up))) + changes |= BIT_APP_UPCHG; +#endif for (i = DCB_PG_ATTR_TC_0; i < tc_max + DCB_PG_ATTR_TC_0; i++) { src = &scfg->tc_config[i - DCB_PG_ATTR_TC_0]; @@ -332,28 +340,12 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) struct ixgbe_adapter *adapter = netdev_priv(netdev); int ret = DCB_NO_HW_CHG; int i; -#ifdef IXGBE_FCOE - struct dcb_app app = { - .selector = DCB_APP_IDTYPE_ETHTYPE, - .protocol = ETH_P_FCOE, - }; - u8 up; - - /* In IEEE mode, use the IEEE Ethertype selector value */ - if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) { - app.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE; - up = dcb_ieee_getapp_mask(netdev, &app); - } else { - up = dcb_getapp(netdev, &app); - } -#endif /* Fail command if not in CEE mode */ if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return ret; - adapter->dcb_set_bitmap |= ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, - &adapter->dcb_cfg, + adapter->dcb_set_bitmap |= ixgbe_copy_dcb_cfg(adapter, MAX_TRAFFIC_CLASS); if (!adapter->dcb_set_bitmap) return ret; @@ -440,8 +432,13 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) * FCoE is using changes. This happens if the APP info * changes or the up2tc mapping is updated. */ - if ((up && !(up & (1 << adapter->fcoe.up))) || - (adapter->dcb_set_bitmap & BIT_APP_UPCHG)) { + if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) { + struct dcb_app app = { + .selector = DCB_APP_IDTYPE_ETHTYPE, + .protocol = ETH_P_FCOE, + }; + u8 up = dcb_getapp(netdev, &app); + adapter->fcoe.up = ffs(up) - 1; ixgbe_dcbnl_devreset(netdev); ret = DCB_HW_CHG_RST; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index d9dbf871abb8..50f0700d250d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4418,8 +4418,8 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->dcb_cfg.pfc_mode_enable = false; adapter->dcb_set_bitmap = 0x00; adapter->dcbx_cap = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE; - ixgbe_copy_dcb_cfg(&adapter->dcb_cfg, &adapter->temp_dcb_cfg, - MAX_TRAFFIC_CLASS); + memcpy(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, + sizeof(adapter->temp_dcb_cfg)); #endif -- cgit v1.2.3 From ed90542b0ce5415050c6fbfca324bccaafa69f2f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 24 Mar 2012 00:29:46 -0400 Subject: iwlwifi: fix skb truesize underestimation By default, iwlwifi uses order-1 pages (8 KB) to store incoming frames, but doesnt say so in skb->truesize. This makes very possible to exhaust kernel memory since these skb evade normal socket memory accounting. As struct ieee80211_hdr is going to be pulled before calling IP stack, there is no need to use dev_alloc_skb() to reserve NET_SKB_PAD bytes. alloc_skb() is ok in this driver, allowing more tailroom. Pull beginning of frame in skb header, in the hope we can reuse order-1 pages in the driver immediately for small frames and reduce their truesize to the minimum (linear skbs) Signed-off-by: Eric Dumazet Cc: Wey-Yi Guy Cc: "John W. Linville" Cc: Neal Cardwell Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rx.c | 21 ++++++++++++++------- drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c | 3 ++- drivers/net/wireless/iwlwifi/iwl-trans.h | 1 + 3 files changed, 17 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c b/drivers/net/wireless/iwlwifi/iwl-agn-rx.c index f4b84d1596e3..22474608a70b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rx.c @@ -773,8 +773,7 @@ static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv, struct sk_buff *skb; __le16 fc = hdr->frame_control; struct iwl_rxon_context *ctx; - struct page *p; - int offset; + unsigned int hdrlen, fraglen; /* We only process data packets if the interface is open */ if (unlikely(!priv->is_open)) { @@ -788,16 +787,24 @@ static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv, iwlagn_set_decrypted_flag(priv, hdr, ampdu_status, stats)) return; - skb = dev_alloc_skb(128); + /* Dont use dev_alloc_skb(), we'll have enough headroom once + * ieee80211_hdr pulled. + */ + skb = alloc_skb(128, GFP_ATOMIC); if (!skb) { - IWL_ERR(priv, "dev_alloc_skb failed\n"); + IWL_ERR(priv, "alloc_skb failed\n"); return; } + hdrlen = min_t(unsigned int, len, skb_tailroom(skb)); + memcpy(skb_put(skb, hdrlen), hdr, hdrlen); + fraglen = len - hdrlen; - offset = (void *)hdr - rxb_addr(rxb); - p = rxb_steal_page(rxb); - skb_add_rx_frag(skb, 0, p, offset, len, len); + if (fraglen) { + int offset = (void *)hdr + hdrlen - rxb_addr(rxb); + skb_add_rx_frag(skb, 0, rxb_steal_page(rxb), offset, + fraglen, rxb->truesize); + } iwl_update_stats(priv, false, fc, len); /* diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c index 8b1a7988e176..aa7aea168138 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c @@ -374,8 +374,9 @@ static void iwl_rx_handle_rxbuf(struct iwl_trans *trans, if (WARN_ON(!rxb)) return; + rxcb.truesize = PAGE_SIZE << hw_params(trans).rx_page_order; dma_unmap_page(trans->dev, rxb->page_dma, - PAGE_SIZE << hw_params(trans).rx_page_order, + rxcb.truesize, DMA_FROM_DEVICE); rxcb._page = rxb->page; diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 0c81cbaa8088..fdf97886a5e4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -260,6 +260,7 @@ static inline void iwl_free_resp(struct iwl_host_cmd *cmd) struct iwl_rx_cmd_buffer { struct page *_page; + unsigned int truesize; }; static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r) -- cgit v1.2.3 From 6868225e3e92399068be9a5f1635752d91012ad5 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 3 May 2012 22:15:07 +0800 Subject: libata: skip old error history when counting probe trials Commit d902747("[libata] Add ATA transport class") introduced ATA_EFLAG_OLD_ER to mark entries in the error ring as cleared. But ata_count_probe_trials_cb() didn't check this flag and it still counts the old error history. So wrong probe trials count is returned and it causes problem, for example, SATA link speed is slowed down from 3.0Gbps to 1.5Gbps. Fix it by checking ATA_EFLAG_OLD_ER in ata_count_probe_trials_cb(). Cc: stable # 2.6.37+ Signed-off-by: Lin Ming Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index c61316e9d2f7..d1fbd59ead16 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3501,7 +3501,8 @@ static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg u64 now = get_jiffies_64(); int *trials = void_arg; - if (ent->timestamp < now - min(now, interval)) + if ((ent->eflags & ATA_EFLAG_OLD_ER) || + (ent->timestamp < now - min(now, interval))) return -1; (*trials)++; -- cgit v1.2.3 From 642d89252201c4155fc3946bf9cdea409e5d263e Mon Sep 17 00:00:00 2001 From: Matt Johnson Date: Fri, 27 Apr 2012 01:42:30 -0500 Subject: ahci: Detect Marvell 88SE9172 SATA controller The Marvell 88SE9172 SATA controller (PCI ID 1b4b 917a) already worked once it was detected, but was missing an ahci_pci_tbl entry. Boot tested on a Gigabyte Z68X-UD3H-B3 motherboard. Signed-off-by: Matt Johnson Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 79a1e9dd56d9..ebaf67e4b2bc 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -394,6 +394,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9128 */ { PCI_DEVICE(0x1b4b, 0x9125), .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ + { PCI_DEVICE(0x1b4b, 0x917a), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ { PCI_DEVICE(0x1b4b, 0x91a3), .driver_data = board_ahci_yes_fbs }, -- cgit v1.2.3 From a78f57af610ea20559e6c63d90876bc262fdbf37 Mon Sep 17 00:00:00 2001 From: Tero Roponen Date: Sun, 22 Apr 2012 11:38:00 +0300 Subject: libata: init ata_print_id to 0 When comparing the dmesg between 3.4-rc3 and 3.4-rc4 I found the following differences: -ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47 -ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47 -ata3: DUMMY +ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47 +ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47 ata4: DUMMY ata5: DUMMY -ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47 +ata6: DUMMY +ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47 The change of numbering comes from commit 85d6725b7c0d7e3f ("libata: make ata_print_id atomic") that changed lines like ap->print_id = ata_print_id++; to ap->print_id = atomic_inc_return(&ata_print_id); As the latter behaves like ++ata_print_id, we must initialize it to zero to start the numbering from one. Signed-off-by: Tero Roponen Acked-by: Dan Williams Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 28db50b57b91..23763a1ec570 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -95,7 +95,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev); static void ata_dev_xfermask(struct ata_device *dev); static unsigned long ata_dev_blacklisted(const struct ata_device *dev); -atomic_t ata_print_id = ATOMIC_INIT(1); +atomic_t ata_print_id = ATOMIC_INIT(0); struct ata_force_param { const char *name; -- cgit v1.2.3 From fb9751d471977be402efa1ee5885a17af78cbc55 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sat, 21 Apr 2012 17:40:09 +0530 Subject: ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros #ifdef, #endif is not required in definition/usage of arasan_cf_pm_ops. So, move this definition and its usage outside of them. Signed-off-by: Viresh Kumar Signed-off-by: Jeff Garzik --- drivers/ata/pata_arasan_cf.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index fc2db2a89a6b..3239517f4d90 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -943,9 +943,9 @@ static int arasan_cf_resume(struct device *dev) return 0; } +#endif static SIMPLE_DEV_PM_OPS(arasan_cf_pm_ops, arasan_cf_suspend, arasan_cf_resume); -#endif static struct platform_driver arasan_cf_driver = { .probe = arasan_cf_probe, @@ -953,9 +953,7 @@ static struct platform_driver arasan_cf_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &arasan_cf_pm_ops, -#endif }, }; -- cgit v1.2.3 From 5f098a3ea72e73ad3733c3280fd5ee04816dc999 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sat, 21 Apr 2012 17:40:12 +0530 Subject: ata: ahci_platform: Add synopsys ahci controller in DT's compatible list SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares ahci_platform driver with other controller versions. This patch updates DT compatible list for ahci_platform. It also updates and renames binding documentation to more generic name. Signed-off-by: Viresh Kumar Cc: Rob Herring Signed-off-by: Jeff Garzik --- drivers/ata/ahci_platform.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 0c86c77764bc..9e419e1c2006 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -280,6 +280,7 @@ static struct dev_pm_ops ahci_pm_ops = { static const struct of_device_id ahci_of_match[] = { { .compatible = "calxeda,hb-ahci", }, + { .compatible = "snps,spear-ahci", }, {}, }; MODULE_DEVICE_TABLE(of, ahci_of_match); -- cgit v1.2.3 From 54b3a4d311c98ad94b737802a8b5f2c8c6bfd627 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 3 May 2012 16:50:46 -0400 Subject: efivars: Improve variable validation Ben Hutchings pointed out that the validation in efivars was inadequate - most obviously, an entry with size 0 would server as a DoS against the kernel. Improve this based on his suggestions. Signed-off-by: Matthew Garrett Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- drivers/firmware/efivars.c | 46 ++++++++++++++++++++++++++++++---------------- 1 file changed, 30 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 891e4674d29b..47408e802ab6 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -192,18 +192,21 @@ utf16_strncmp(const efi_char16_t *a, const efi_char16_t *b, size_t len) } static bool -validate_device_path(struct efi_variable *var, int match, u8 *buffer, int len) +validate_device_path(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) { struct efi_generic_dev_path *node; int offset = 0; node = (struct efi_generic_dev_path *)buffer; - while (offset < len) { - offset += node->length; + if (len < sizeof(*node)) + return false; - if (offset > len) - return false; + while (offset <= len - sizeof(*node) && + node->length >= sizeof(*node) && + node->length <= len - offset) { + offset += node->length; if ((node->type == EFI_DEV_END_PATH || node->type == EFI_DEV_END_PATH2) && @@ -222,7 +225,8 @@ validate_device_path(struct efi_variable *var, int match, u8 *buffer, int len) } static bool -validate_boot_order(struct efi_variable *var, int match, u8 *buffer, int len) +validate_boot_order(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) { /* An array of 16-bit integers */ if ((len % 2) != 0) @@ -232,19 +236,27 @@ validate_boot_order(struct efi_variable *var, int match, u8 *buffer, int len) } static bool -validate_load_option(struct efi_variable *var, int match, u8 *buffer, int len) +validate_load_option(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) { u16 filepathlength; - int i, desclength = 0; + int i, desclength = 0, namelen; + + namelen = utf16_strnlen(var->VariableName, sizeof(var->VariableName)); /* Either "Boot" or "Driver" followed by four digits of hex */ for (i = match; i < match+4; i++) { - if (hex_to_bin(var->VariableName[i] & 0xff) < 0) + if (var->VariableName[i] > 127 || + hex_to_bin(var->VariableName[i] & 0xff) < 0) return true; } - /* A valid entry must be at least 6 bytes */ - if (len < 6) + /* Reject it if there's 4 digits of hex and then further content */ + if (namelen > match + 4) + return false; + + /* A valid entry must be at least 8 bytes */ + if (len < 8) return false; filepathlength = buffer[4] | buffer[5] << 8; @@ -253,7 +265,7 @@ validate_load_option(struct efi_variable *var, int match, u8 *buffer, int len) * There's no stored length for the description, so it has to be * found by hand */ - desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len) + 2; + desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len - 6) + 2; /* Each boot entry must have a descriptor */ if (!desclength) @@ -275,7 +287,8 @@ validate_load_option(struct efi_variable *var, int match, u8 *buffer, int len) } static bool -validate_uint16(struct efi_variable *var, int match, u8 *buffer, int len) +validate_uint16(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) { /* A single 16-bit integer */ if (len != 2) @@ -285,7 +298,8 @@ validate_uint16(struct efi_variable *var, int match, u8 *buffer, int len) } static bool -validate_ascii_string(struct efi_variable *var, int match, u8 *buffer, int len) +validate_ascii_string(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) { int i; @@ -303,7 +317,7 @@ validate_ascii_string(struct efi_variable *var, int match, u8 *buffer, int len) struct variable_validate { char *name; bool (*validate)(struct efi_variable *var, int match, u8 *data, - int len); + unsigned long len); }; static const struct variable_validate variable_validate[] = { @@ -325,7 +339,7 @@ static const struct variable_validate variable_validate[] = { }; static bool -validate_var(struct efi_variable *var, u8 *data, int len) +validate_var(struct efi_variable *var, u8 *data, unsigned long len) { int i; u16 *unicode_name = var->VariableName; -- cgit v1.2.3 From dad8a3b3eaa0c2ca25368a0b9f65edca84e27a40 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Mon, 23 Apr 2012 12:22:39 +0000 Subject: igb, ixgbe: netdev_tx_reset_queue incorrectly called from tx init path igb and ixgbe incorrectly call netdev_tx_reset_queue() from i{gb|xgbe}_clean_tx_ring() this sort of works in most cases except when the number of real tx queues changes. When the number of real tx queues changes netdev_tx_reset_queue() only gets called on the new number of queues so when we reduce the number of queues we risk triggering the watchdog timer and repeated device resets. So this is not only a cosmetic issue but causes real bugs. For example enabling/disabling DCB or FCoE in ixgbe will trigger this. CC: Alexander Duyck Signed-off-by: John Fastabend Tested-by: John Bishop Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 4 ++-- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 2 ++ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++-- 3 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 5ec31598ee47..d22350055285 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2771,8 +2771,6 @@ void igb_configure_tx_ring(struct igb_adapter *adapter, txdctl |= E1000_TXDCTL_QUEUE_ENABLE; wr32(E1000_TXDCTL(reg_idx), txdctl); - - netdev_tx_reset_queue(txring_txq(ring)); } /** @@ -3282,6 +3280,8 @@ static void igb_clean_tx_ring(struct igb_ring *tx_ring) igb_unmap_and_free_tx_resource(tx_ring, buffer_info); } + netdev_tx_reset_queue(txring_txq(tx_ring)); + size = sizeof(struct igb_tx_buffer) * tx_ring->count; memset(tx_ring->tx_buffer_info, 0, size); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 31a2bf76a346..cfe7d269590c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1780,6 +1780,8 @@ static u16 ixgbe_clean_test_rings(struct ixgbe_ring *rx_ring, rx_desc = IXGBE_RX_DESC(rx_ring, rx_ntc); } + netdev_tx_reset_queue(txring_txq(tx_ring)); + /* re-map buffers to ring, store next to clean values */ ixgbe_alloc_rx_buffers(rx_ring, count); rx_ring->next_to_clean = rx_ntc; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 50f0700d250d..467948e9ecd9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2671,8 +2671,6 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, /* enable queue */ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), txdctl); - netdev_tx_reset_queue(txring_txq(ring)); - /* TXDCTL.EN will return 0 on 82598 if link is down, so skip it */ if (hw->mac.type == ixgbe_mac_82598EB && !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) @@ -4167,6 +4165,8 @@ static void ixgbe_clean_tx_ring(struct ixgbe_ring *tx_ring) ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info); } + netdev_tx_reset_queue(txring_txq(tx_ring)); + size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; memset(tx_ring->tx_buffer_info, 0, size); -- cgit v1.2.3 From dd7f5c9e5cb24f72140206d3e5961b4cc5a84034 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Sun, 25 Mar 2012 17:49:25 +0000 Subject: e1000: Silence sparse warnings by correcting type Silence sparse warnings shown below: ... drivers/net/ethernet/intel/e1000/e1000_main.c:3435:17: warning: cast to restricted __le64 drivers/net/ethernet/intel/e1000/e1000_main.c:3435:17: warning: cast to restricted __le64 ... Signed-off-by: Andrei Emeltchenko Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 4348b6fd44fa..37caa8885c2a 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -3380,7 +3380,7 @@ static void e1000_dump(struct e1000_adapter *adapter) for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) { struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i); struct e1000_buffer *buffer_info = &tx_ring->buffer_info[i]; - struct my_u { u64 a; u64 b; }; + struct my_u { __le64 a; __le64 b; }; struct my_u *u = (struct my_u *)tx_desc; const char *type; @@ -3424,7 +3424,7 @@ rx_ring_summary: for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) { struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i); struct e1000_buffer *buffer_info = &rx_ring->buffer_info[i]; - struct my_u { u64 a; u64 b; }; + struct my_u { __le64 a; __le64 b; }; struct my_u *u = (struct my_u *)rx_desc; const char *type; -- cgit v1.2.3 From 24f06716cd5dbfc3d737ec2a24ac58ef76f68dc7 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Sun, 6 May 2012 07:05:57 +0000 Subject: bnx2x: bug fix when loading after SAN boot This is a bug fix for an "interface fails to load" issue. The issue occurs when bnx2x driver loads after UNDI driver was previously loaded over the chip. In such a scenario the UNDI driver is loaded and operates in the pre-boot kernel, within its own specific host memory address range. When the pre-boot stage is complete, the real kernel is loaded, in a new and distinct host memory address range. The transition from pre-boot stage to boot is asynchronous from UNDI point of view. A race condition occurs when UNDI driver triggers a DMAE transaction to valid host addresses in the pre-boot stage, when control is diverted to the real kernel. This results in access to illegal addresses by our HW as the addresses which were valid in the preboot stage are no longer considered valid. Specifically, the 'was_error' bit in the pci glue of our device is set. This causes all following pci transactions from chip to host to timeout (in accordance to the pci spec). Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index e077d2508727..6af310195bae 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9122,13 +9122,34 @@ static int __devinit bnx2x_prev_unload_common(struct bnx2x *bp) return bnx2x_prev_mcp_done(bp); } +/* previous driver DMAE transaction may have occurred when pre-boot stage ended + * and boot began, or when kdump kernel was loaded. Either case would invalidate + * the addresses of the transaction, resulting in was-error bit set in the pci + * causing all hw-to-host pcie transactions to timeout. If this happened we want + * to clear the interrupt which detected this from the pglueb and the was done + * bit + */ +static void __devinit bnx2x_prev_interrupted_dmae(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) { + BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing"); + REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, 1 << BP_FUNC(bp)); + } +} + static int __devinit bnx2x_prev_unload(struct bnx2x *bp) { int time_counter = 10; u32 rc, fw, hw_lock_reg, hw_lock_val; BNX2X_DEV_INFO("Entering Previous Unload Flow\n"); - /* Release previously held locks */ + /* clear hw from errors which may have resulted from an interrupted + * dmae transaction. + */ + bnx2x_prev_interrupted_dmae(bp); + + /* Release previously held locks */ hw_lock_reg = (BP_FUNC(bp) <= 5) ? (MISC_REG_DRIVER_CONTROL_1 + BP_FUNC(bp) * 8) : (MISC_REG_DRIVER_CONTROL_7 + (BP_FUNC(bp) - 6) * 8); -- cgit v1.2.3 From 6eddcb4c82883451aec3be1240f17793370fa62f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 26 Apr 2012 02:35:10 +0000 Subject: cdc_ether: Ignore bogus union descriptor for RNDIS devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some RNDIS devices include a bogus CDC Union descriptor pointing to non-existing interfaces. The RNDIS code is already prepared to handle devices without a CDC Union descriptor by hardwiring the driver to use interfaces 0 and 1, which is correct for the devices with the bogus descriptor as well. So we can reuse the existing workaround. Cc: Markus Kolb Cc: Iker Salmón San Millán Cc: Jonathan Nieder Cc: Oliver Neukum Cc: 655387@bugs.debian.org Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ether.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 90a30026a931..00880edba048 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -83,6 +83,7 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf) struct cdc_state *info = (void *) &dev->data; int status; int rndis; + bool android_rndis_quirk = false; struct usb_driver *driver = driver_of(intf); struct usb_cdc_mdlm_desc *desc = NULL; struct usb_cdc_mdlm_detail_desc *detail = NULL; @@ -195,6 +196,11 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf) info->control, info->u->bSlaveInterface0, info->data); + /* fall back to hard-wiring for RNDIS */ + if (rndis) { + android_rndis_quirk = true; + goto next_desc; + } goto bad_desc; } if (info->control != intf) { @@ -271,11 +277,15 @@ next_desc: /* Microsoft ActiveSync based and some regular RNDIS devices lack the * CDC descriptors, so we'll hard-wire the interfaces and not check * for descriptors. + * + * Some Android RNDIS devices have a CDC Union descriptor pointing + * to non-existing interfaces. Ignore that and attempt the same + * hard-wired 0 and 1 interfaces. */ - if (rndis && !info->u) { + if (rndis && (!info->u || android_rndis_quirk)) { info->control = usb_ifnum_to_if(dev->udev, 0); info->data = usb_ifnum_to_if(dev->udev, 1); - if (!info->control || !info->data) { + if (!info->control || !info->data || info->control != intf) { dev_dbg(&intf->dev, "rndis: master #0/%p slave #1/%p\n", info->control, -- cgit v1.2.3