From 441b62c1edb986827154768d89bbac0ba779984f Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Mon, 3 Mar 2008 16:08:34 -0800 Subject: USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/ueagle-atm.c | 6 +- drivers/usb/class/cdc-acm.c | 6 +- drivers/usb/core/devio.c | 42 ++-- drivers/usb/core/driver.c | 30 +-- drivers/usb/core/hub.c | 8 +- drivers/usb/core/inode.c | 4 +- drivers/usb/core/message.c | 8 +- drivers/usb/core/urb.c | 2 +- drivers/usb/gadget/at91_udc.c | 4 +- drivers/usb/gadget/dummy_hcd.c | 12 +- drivers/usb/gadget/ether.c | 12 +- drivers/usb/gadget/file_storage.c | 8 +- drivers/usb/gadget/fsl_usb2_udc.c | 4 +- drivers/usb/gadget/fsl_usb2_udc.h | 2 +- drivers/usb/gadget/goku_udc.c | 20 +- drivers/usb/gadget/inode.c | 18 +- drivers/usb/gadget/lh7a40x_udc.c | 132 ++++++------ drivers/usb/gadget/net2280.h | 2 +- drivers/usb/gadget/omap_udc.c | 16 +- drivers/usb/gadget/printer.c | 6 +- drivers/usb/gadget/pxa2xx_udc.c | 26 +-- drivers/usb/gadget/rndis.c | 146 ++++++------- drivers/usb/host/ehci-q.c | 4 +- drivers/usb/host/ehci-sched.c | 2 +- drivers/usb/host/pci-quirks.c | 6 +- drivers/usb/host/sl811-hcd.c | 4 +- drivers/usb/host/uhci-hcd.c | 6 +- drivers/usb/host/uhci-q.c | 2 +- drivers/usb/misc/adutux.c | 120 +++++------ drivers/usb/misc/appledisplay.c | 6 +- drivers/usb/misc/auerswald.c | 8 +- drivers/usb/misc/emi26.c | 30 +-- drivers/usb/misc/emi62.c | 32 +-- drivers/usb/misc/iowarrior.c | 6 +- drivers/usb/misc/ldusb.c | 10 +- drivers/usb/misc/legousbtower.c | 88 ++++---- drivers/usb/misc/phidgetkit.c | 6 +- drivers/usb/misc/phidgetmotorcontrol.c | 2 +- drivers/usb/misc/phidgetservo.c | 6 +- drivers/usb/misc/usblcd.c | 6 +- drivers/usb/misc/usbtest.c | 4 +- drivers/usb/serial/aircable.c | 52 ++--- drivers/usb/serial/airprime.c | 34 +-- drivers/usb/serial/ark3116.c | 6 +- drivers/usb/serial/belkin_sa.c | 18 +- drivers/usb/serial/console.c | 10 +- drivers/usb/serial/cp2101.c | 108 +++++----- drivers/usb/serial/cyberjack.c | 72 +++---- drivers/usb/serial/cypress_m8.c | 128 ++++++------ drivers/usb/serial/digi_acceleport.c | 36 ++-- drivers/usb/serial/empeg.c | 54 ++--- drivers/usb/serial/ezusb.c | 8 +- drivers/usb/serial/ftdi_sio.c | 156 +++++++------- drivers/usb/serial/garmin_gps.c | 106 +++++----- drivers/usb/serial/generic.c | 44 ++-- drivers/usb/serial/io_edgeport.c | 318 ++++++++++++++-------------- drivers/usb/serial/io_ti.c | 364 ++++++++++++++++----------------- drivers/usb/serial/ipaq.c | 44 ++-- drivers/usb/serial/ipw.c | 48 ++--- drivers/usb/serial/ir-usb.c | 46 ++--- drivers/usb/serial/iuu_phoenix.c | 128 ++++++------ drivers/usb/serial/keyspan.c | 234 ++++++++++----------- drivers/usb/serial/keyspan_pda.c | 20 +- drivers/usb/serial/kl5kusb105.c | 78 +++---- drivers/usb/serial/kobil_sct.c | 56 ++--- drivers/usb/serial/mct_u232.c | 36 ++-- drivers/usb/serial/mos7720.c | 118 +++++------ drivers/usb/serial/mos7840.c | 150 +++++++------- drivers/usb/serial/navman.c | 18 +- drivers/usb/serial/omninet.c | 32 +-- drivers/usb/serial/option.c | 64 +++--- drivers/usb/serial/oti6858.c | 108 +++++----- drivers/usb/serial/pl2303.c | 106 +++++----- drivers/usb/serial/safe_serial.c | 28 +-- drivers/usb/serial/sierra.c | 62 +++--- drivers/usb/serial/ti_usb_3410_5052.c | 190 ++++++++--------- drivers/usb/serial/usb-serial.c | 78 +++---- drivers/usb/serial/visor.c | 86 ++++---- drivers/usb/serial/whiteheat.c | 104 +++++----- drivers/usb/storage/scsiglue.c | 10 +- drivers/usb/storage/transport.c | 18 +- drivers/usb/storage/usb.c | 16 +- drivers/usb/usb-skeleton.c | 6 +- 83 files changed, 2130 insertions(+), 2130 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index c5ec1a55eee3..abb7d7410e63 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -83,7 +83,7 @@ if (debug >= 1) \ dev_dbg(&(usb_dev)->dev, \ "[ueagle-atm dbg] %s: " format, \ - __FUNCTION__, ##args); \ + __func__, ##args); \ } while (0) #define uea_vdbg(usb_dev, format, args...) \ @@ -94,10 +94,10 @@ } while (0) #define uea_enters(usb_dev) \ - uea_vdbg(usb_dev, "entering %s\n", __FUNCTION__) + uea_vdbg(usb_dev, "entering %s\n", __func__) #define uea_leaves(usb_dev) \ - uea_vdbg(usb_dev, "leaving %s\n", __FUNCTION__) + uea_vdbg(usb_dev, "leaving %s\n", __func__) #define uea_err(usb_dev, format,args...) \ dev_err(&(usb_dev)->dev ,"[UEAGLE-ATM] " format , ##args) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6d57413ac0f5..33cdf8fa2f20 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -260,10 +260,10 @@ static void acm_ctrl_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, status); + dbg("%s - urb shutting down with status: %d", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, status); + dbg("%s - nonzero urb status received: %d", __func__, status); goto exit; } @@ -307,7 +307,7 @@ exit: retval = usb_submit_urb (urb, GFP_ATOMIC); if (retval) err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); + __func__, retval); } /* data interface returns incoming bytes, or we got unthrottled */ diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6c4cd82d7d14..de17738f3acb 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1530,60 +1530,60 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, switch (cmd) { case USBDEVFS_CONTROL: - snoop(&dev->dev, "%s: CONTROL\n", __FUNCTION__); + snoop(&dev->dev, "%s: CONTROL\n", __func__); ret = proc_control(ps, p); if (ret >= 0) inode->i_mtime = CURRENT_TIME; break; case USBDEVFS_BULK: - snoop(&dev->dev, "%s: BULK\n", __FUNCTION__); + snoop(&dev->dev, "%s: BULK\n", __func__); ret = proc_bulk(ps, p); if (ret >= 0) inode->i_mtime = CURRENT_TIME; break; case USBDEVFS_RESETEP: - snoop(&dev->dev, "%s: RESETEP\n", __FUNCTION__); + snoop(&dev->dev, "%s: RESETEP\n", __func__); ret = proc_resetep(ps, p); if (ret >= 0) inode->i_mtime = CURRENT_TIME; break; case USBDEVFS_RESET: - snoop(&dev->dev, "%s: RESET\n", __FUNCTION__); + snoop(&dev->dev, "%s: RESET\n", __func__); ret = proc_resetdevice(ps); break; case USBDEVFS_CLEAR_HALT: - snoop(&dev->dev, "%s: CLEAR_HALT\n", __FUNCTION__); + snoop(&dev->dev, "%s: CLEAR_HALT\n", __func__); ret = proc_clearhalt(ps, p); if (ret >= 0) inode->i_mtime = CURRENT_TIME; break; case USBDEVFS_GETDRIVER: - snoop(&dev->dev, "%s: GETDRIVER\n", __FUNCTION__); + snoop(&dev->dev, "%s: GETDRIVER\n", __func__); ret = proc_getdriver(ps, p); break; case USBDEVFS_CONNECTINFO: - snoop(&dev->dev, "%s: CONNECTINFO\n", __FUNCTION__); + snoop(&dev->dev, "%s: CONNECTINFO\n", __func__); ret = proc_connectinfo(ps, p); break; case USBDEVFS_SETINTERFACE: - snoop(&dev->dev, "%s: SETINTERFACE\n", __FUNCTION__); + snoop(&dev->dev, "%s: SETINTERFACE\n", __func__); ret = proc_setintf(ps, p); break; case USBDEVFS_SETCONFIGURATION: - snoop(&dev->dev, "%s: SETCONFIGURATION\n", __FUNCTION__); + snoop(&dev->dev, "%s: SETCONFIGURATION\n", __func__); ret = proc_setconfig(ps, p); break; case USBDEVFS_SUBMITURB: - snoop(&dev->dev, "%s: SUBMITURB\n", __FUNCTION__); + snoop(&dev->dev, "%s: SUBMITURB\n", __func__); ret = proc_submiturb(ps, p); if (ret >= 0) inode->i_mtime = CURRENT_TIME; @@ -1592,60 +1592,60 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, #ifdef CONFIG_COMPAT case USBDEVFS_SUBMITURB32: - snoop(&dev->dev, "%s: SUBMITURB32\n", __FUNCTION__); + snoop(&dev->dev, "%s: SUBMITURB32\n", __func__); ret = proc_submiturb_compat(ps, p); if (ret >= 0) inode->i_mtime = CURRENT_TIME; break; case USBDEVFS_REAPURB32: - snoop(&dev->dev, "%s: REAPURB32\n", __FUNCTION__); + snoop(&dev->dev, "%s: REAPURB32\n", __func__); ret = proc_reapurb_compat(ps, p); break; case USBDEVFS_REAPURBNDELAY32: - snoop(&dev->dev, "%s: REAPURBDELAY32\n", __FUNCTION__); + snoop(&dev->dev, "%s: REAPURBDELAY32\n", __func__); ret = proc_reapurbnonblock_compat(ps, p); break; case USBDEVFS_IOCTL32: - snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__); + snoop(&dev->dev, "%s: IOCTL\n", __func__); ret = proc_ioctl_compat(ps, ptr_to_compat(p)); break; #endif case USBDEVFS_DISCARDURB: - snoop(&dev->dev, "%s: DISCARDURB\n", __FUNCTION__); + snoop(&dev->dev, "%s: DISCARDURB\n", __func__); ret = proc_unlinkurb(ps, p); break; case USBDEVFS_REAPURB: - snoop(&dev->dev, "%s: REAPURB\n", __FUNCTION__); + snoop(&dev->dev, "%s: REAPURB\n", __func__); ret = proc_reapurb(ps, p); break; case USBDEVFS_REAPURBNDELAY: - snoop(&dev->dev, "%s: REAPURBDELAY\n", __FUNCTION__); + snoop(&dev->dev, "%s: REAPURBDELAY\n", __func__); ret = proc_reapurbnonblock(ps, p); break; case USBDEVFS_DISCSIGNAL: - snoop(&dev->dev, "%s: DISCSIGNAL\n", __FUNCTION__); + snoop(&dev->dev, "%s: DISCSIGNAL\n", __func__); ret = proc_disconnectsignal(ps, p); break; case USBDEVFS_CLAIMINTERFACE: - snoop(&dev->dev, "%s: CLAIMINTERFACE\n", __FUNCTION__); + snoop(&dev->dev, "%s: CLAIMINTERFACE\n", __func__); ret = proc_claiminterface(ps, p); break; case USBDEVFS_RELEASEINTERFACE: - snoop(&dev->dev, "%s: RELEASEINTERFACE\n", __FUNCTION__); + snoop(&dev->dev, "%s: RELEASEINTERFACE\n", __func__); ret = proc_releaseinterface(ps, p); break; case USBDEVFS_IOCTL: - snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__); + snoop(&dev->dev, "%s: IOCTL\n", __func__); ret = proc_ioctl_default(ps, p); break; } diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index edc31e13e95e..1e56f1cfa6dc 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -157,7 +157,7 @@ static int usb_probe_device(struct device *dev) struct usb_device *udev; int error = -ENODEV; - dev_dbg(dev, "%s\n", __FUNCTION__); + dev_dbg(dev, "%s\n", __func__); if (!is_usb_device(dev)) /* Sanity check */ return error; @@ -194,7 +194,7 @@ static int usb_probe_interface(struct device *dev) const struct usb_device_id *id; int error = -ENODEV; - dev_dbg(dev, "%s\n", __FUNCTION__); + dev_dbg(dev, "%s\n", __func__); if (is_usb_device(dev)) /* Sanity check */ return error; @@ -211,7 +211,7 @@ static int usb_probe_interface(struct device *dev) if (!id) id = usb_match_dynamic_id(intf, driver); if (id) { - dev_dbg(dev, "%s - got id\n", __FUNCTION__); + dev_dbg(dev, "%s - got id\n", __func__); error = usb_autoresume_device(udev); if (error) @@ -793,7 +793,7 @@ static int usb_suspend_device(struct usb_device *udev, pm_message_t msg) status = udriver->suspend(udev, msg); done: - dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); + dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status); return status; } @@ -821,7 +821,7 @@ static int usb_resume_device(struct usb_device *udev) status = udriver->resume(udev); done: - dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); + dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status); if (status == 0) udev->autoresume_disabled = 0; return status; @@ -860,7 +860,7 @@ static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg) } done: - dev_vdbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status); + dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status); return status; } @@ -910,7 +910,7 @@ static int usb_resume_interface(struct usb_interface *intf, int reset_resume) } done: - dev_vdbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status); + dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status); if (status == 0) mark_active(intf); @@ -1093,7 +1093,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) } done: - dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); + dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status); return status; } @@ -1187,7 +1187,7 @@ static int usb_resume_both(struct usb_device *udev) } done: - dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); + dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status); if (!status) udev->reset_resume = 0; return status; @@ -1257,7 +1257,7 @@ void usb_autosuspend_device(struct usb_device *udev) status = usb_autopm_do_device(udev, -1); dev_vdbg(&udev->dev, "%s: cnt %d\n", - __FUNCTION__, udev->pm_usage_cnt); + __func__, udev->pm_usage_cnt); } /** @@ -1277,7 +1277,7 @@ void usb_try_autosuspend_device(struct usb_device *udev) { usb_autopm_do_device(udev, 0); dev_vdbg(&udev->dev, "%s: cnt %d\n", - __FUNCTION__, udev->pm_usage_cnt); + __func__, udev->pm_usage_cnt); } /** @@ -1305,7 +1305,7 @@ int usb_autoresume_device(struct usb_device *udev) status = usb_autopm_do_device(udev, 1); dev_vdbg(&udev->dev, "%s: status %d cnt %d\n", - __FUNCTION__, status, udev->pm_usage_cnt); + __func__, status, udev->pm_usage_cnt); return status; } @@ -1377,7 +1377,7 @@ void usb_autopm_put_interface(struct usb_interface *intf) status = usb_autopm_do_interface(intf, -1); dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __FUNCTION__, status, intf->pm_usage_cnt); + __func__, status, intf->pm_usage_cnt); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface); @@ -1421,7 +1421,7 @@ int usb_autopm_get_interface(struct usb_interface *intf) status = usb_autopm_do_interface(intf, 1); dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __FUNCTION__, status, intf->pm_usage_cnt); + __func__, status, intf->pm_usage_cnt); return status; } EXPORT_SYMBOL_GPL(usb_autopm_get_interface); @@ -1443,7 +1443,7 @@ int usb_autopm_set_interface(struct usb_interface *intf) status = usb_autopm_do_interface(intf, 0); dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __FUNCTION__, status, intf->pm_usage_cnt); + __func__, status, intf->pm_usage_cnt); return status; } EXPORT_SYMBOL_GPL(usb_autopm_set_interface); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5a338a5d4fe7..06c3acb161ee 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -575,7 +575,7 @@ static int hub_hub_status(struct usb_hub *hub, ret = get_hub_status(hub->hdev, &hub->status->hub); if (ret < 0) dev_err (hub->intfdev, - "%s failed (err = %d)\n", __FUNCTION__, ret); + "%s failed (err = %d)\n", __func__, ret); else { *status = le16_to_cpu(hub->status->hub.wHubStatus); *change = le16_to_cpu(hub->status->hub.wHubChange); @@ -1270,7 +1270,7 @@ void usb_disconnect(struct usb_device **pdev) int i; if (!udev) { - pr_debug ("%s nodev\n", __FUNCTION__); + pr_debug ("%s nodev\n", __func__); return; } @@ -2072,7 +2072,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) } } - dev_dbg(&intf->dev, "%s\n", __FUNCTION__); + dev_dbg(&intf->dev, "%s\n", __func__); /* stop khubd and related activity */ hub_quiesce(hub); @@ -3125,7 +3125,7 @@ int usb_reset_device(struct usb_device *udev) if (!parent_hdev) { /* this requires hcd-specific logic; see OHCI hc_restart() */ - dev_dbg(&udev->dev, "%s for root hub!\n", __FUNCTION__); + dev_dbg(&udev->dev, "%s for root hub!\n", __func__); return -EISDIR; } parent_hub = hdev_to_hub(parent_hdev); diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 83a373e9cc36..8607846e3c3f 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -463,13 +463,13 @@ static int usbfs_fill_super(struct super_block *sb, void *data, int silent) inode = usbfs_get_inode(sb, S_IFDIR | 0755, 0); if (!inode) { - dbg("%s: could not get inode!",__FUNCTION__); + dbg("%s: could not get inode!",__func__); return -ENOMEM; } root = d_alloc_root(inode); if (!root) { - dbg("%s: could not get root dentry!",__FUNCTION__); + dbg("%s: could not get root dentry!",__func__); iput(inode); return -ENOMEM; } diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 5b23f6b017d7..e819e5359d57 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -312,7 +312,7 @@ static void sg_complete(struct urb *urb) retval != -EBUSY) dev_err(&io->dev->dev, "%s, unlink --> %d\n", - __FUNCTION__, retval); + __func__, retval); } else if (urb == io->urbs [i]) found = 1; } @@ -550,7 +550,7 @@ void usb_sg_wait(struct usb_sg_request *io) io->urbs[i]->dev = NULL; io->urbs[i]->status = retval; dev_dbg(&io->dev->dev, "%s, submit --> %d\n", - __FUNCTION__, retval); + __func__, retval); usb_sg_cancel(io); } spin_lock_irq(&io->lock); @@ -600,7 +600,7 @@ void usb_sg_cancel(struct usb_sg_request *io) retval = usb_unlink_urb(io->urbs [i]); if (retval != -EINPROGRESS && retval != -EBUSY) dev_warn(&io->dev->dev, "%s, unlink --> %d\n", - __FUNCTION__, retval); + __func__, retval); } spin_lock(&io->lock); } @@ -1068,7 +1068,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) { int i; - dev_dbg(&dev->dev, "%s nuking %s URBs\n", __FUNCTION__, + dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, skip_ep0 ? "non-ep0" : "all"); for (i = skip_ep0; i < 16; ++i) { usb_disable_endpoint(dev, i); diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 1d3ed1322fbe..c0b1ae25ae2a 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -334,7 +334,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) dev_dbg(&dev->dev, "bogus endpoint ep%d%s in %s (bad maxpacket %d)\n", usb_endpoint_num(&ep->desc), is_out ? "out" : "in", - __FUNCTION__, max); + __func__, max); return -EMSGSIZE; } diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 5d352c900d2c..9b913afb2e6d 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -460,7 +460,7 @@ static void nuke(struct at91_ep *ep, int status) if (list_empty(&ep->queue)) return; - VDBG("%s %s\n", __FUNCTION__, ep->ep.name); + VDBG("%s %s\n", __func__, ep->ep.name); while (!list_empty(&ep->queue)) { req = list_entry(ep->queue.next, struct at91_request, queue); done(ep, req, status); @@ -795,7 +795,7 @@ static int at91_wakeup(struct usb_gadget *gadget) int status = -EINVAL; unsigned long flags; - DBG("%s\n", __FUNCTION__ ); + DBG("%s\n", __func__ ); local_irq_save(flags); if (!udc->clocked || !udc->suspended) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 74f51a703b42..66293105d136 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -892,7 +892,7 @@ static int dummy_udc_suspend (struct platform_device *pdev, pm_message_t state) { struct dummy *dum = platform_get_drvdata(pdev); - dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); + dev_dbg (&pdev->dev, "%s\n", __func__); spin_lock_irq (&dum->lock); dum->udc_suspended = 1; set_link_state (dum); @@ -906,7 +906,7 @@ static int dummy_udc_resume (struct platform_device *pdev) { struct dummy *dum = platform_get_drvdata(pdev); - dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); + dev_dbg (&pdev->dev, "%s\n", __func__); spin_lock_irq (&dum->lock); dum->udc_suspended = 0; set_link_state (dum); @@ -1707,7 +1707,7 @@ static int dummy_bus_suspend (struct usb_hcd *hcd) { struct dummy *dum = hcd_to_dummy (hcd); - dev_dbg (&hcd->self.root_hub->dev, "%s\n", __FUNCTION__); + dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__); spin_lock_irq (&dum->lock); dum->rh_state = DUMMY_RH_SUSPENDED; @@ -1722,7 +1722,7 @@ static int dummy_bus_resume (struct usb_hcd *hcd) struct dummy *dum = hcd_to_dummy (hcd); int rc = 0; - dev_dbg (&hcd->self.root_hub->dev, "%s\n", __FUNCTION__); + dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__); spin_lock_irq (&dum->lock); if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { @@ -1896,7 +1896,7 @@ static int dummy_hcd_suspend (struct platform_device *pdev, pm_message_t state) struct dummy *dum; int rc = 0; - dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); + dev_dbg (&pdev->dev, "%s\n", __func__); hcd = platform_get_drvdata (pdev); dum = hcd_to_dummy (hcd); @@ -1912,7 +1912,7 @@ static int dummy_hcd_resume (struct platform_device *pdev) { struct usb_hcd *hcd; - dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); + dev_dbg (&pdev->dev, "%s\n", __func__); hcd = platform_get_drvdata (pdev); set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 92b9bf78071f..bb93bdd76593 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -1102,7 +1102,7 @@ static void eth_reset_config (struct eth_dev *dev) if (dev->config == 0) return; - DEBUG (dev, "%s\n", __FUNCTION__); + DEBUG (dev, "%s\n", __func__); netif_stop_queue (dev->net); netif_carrier_off (dev->net); @@ -1263,7 +1263,7 @@ static void issue_start_status (struct eth_dev *dev) struct usb_cdc_notification *event; int value; - DEBUG (dev, "%s, flush old status first\n", __FUNCTION__); + DEBUG (dev, "%s, flush old status first\n", __func__); /* flush old status * @@ -1329,7 +1329,7 @@ static void rndis_command_complete (struct usb_ep *ep, struct usb_request *req) spin_lock(&dev->lock); status = rndis_msg_parser (dev->rndis_config, (u8 *) req->buf); if (status < 0) - ERROR(dev, "%s: rndis parse error %d\n", __FUNCTION__, status); + ERROR(dev, "%s: rndis parse error %d\n", __func__, status); spin_unlock(&dev->lock); } @@ -2113,7 +2113,7 @@ static int rndis_control_ack (struct net_device *net) static void eth_start (struct eth_dev *dev, gfp_t gfp_flags) { - DEBUG (dev, "%s\n", __FUNCTION__); + DEBUG (dev, "%s\n", __func__); /* fill the rx queue */ rx_fill (dev, gfp_flags); @@ -2133,7 +2133,7 @@ static int eth_open (struct net_device *net) { struct eth_dev *dev = netdev_priv(net); - DEBUG (dev, "%s\n", __FUNCTION__); + DEBUG (dev, "%s\n", __func__); if (netif_carrier_ok (dev->net)) eth_start (dev, GFP_KERNEL); return 0; @@ -2143,7 +2143,7 @@ static int eth_stop (struct net_device *net) { struct eth_dev *dev = netdev_priv(net); - VDEBUG (dev, "%s\n", __FUNCTION__); + VDEBUG (dev, "%s\n", __func__); netif_stop_queue (net); DEBUG (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n", diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 0a726e106ccd..bf3f946fd455 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -1104,7 +1104,7 @@ static void ep0_complete(struct usb_ep *ep, struct usb_request *req) if (req->actual > 0) dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual); if (req->status || req->actual != req->length) - DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__, + DBG(fsg, "%s --> %d, %u/%u\n", __func__, req->status, req->actual, req->length); if (req->status == -ECONNRESET) // Request was cancelled usb_ep_fifo_flush(ep); @@ -1125,7 +1125,7 @@ static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) struct fsg_buffhd *bh = req->context; if (req->status || req->actual != req->length) - DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__, + DBG(fsg, "%s --> %d, %u/%u\n", __func__, req->status, req->actual, req->length); if (req->status == -ECONNRESET) // Request was cancelled usb_ep_fifo_flush(ep); @@ -1146,7 +1146,7 @@ static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) dump_msg(fsg, "bulk-out", req->buf, req->actual); if (req->status || req->actual != bh->bulk_out_intended_length) - DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__, + DBG(fsg, "%s --> %d, %u/%u\n", __func__, req->status, req->actual, bh->bulk_out_intended_length); if (req->status == -ECONNRESET) // Request was cancelled @@ -1169,7 +1169,7 @@ static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) struct fsg_buffhd *bh = req->context; if (req->status || req->actual != req->length) - DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__, + DBG(fsg, "%s --> %d, %u/%u\n", __func__, req->status, req->actual, req->length); if (req->status == -ECONNRESET) // Request was cancelled usb_ep_fifo_flush(ep); diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 254012ad2b91..651b82701394 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -773,11 +773,11 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* catch various bogus parameters */ if (!_req || !req->req.complete || !req->req.buf || !list_empty(&req->queue)) { - VDBG("%s, bad params\n", __FUNCTION__); + VDBG("%s, bad params\n", __func__); return -EINVAL; } if (unlikely(!_ep || !ep->desc)) { - VDBG("%s, bad ep\n", __FUNCTION__); + VDBG("%s, bad ep\n", __func__); return -EINVAL; } if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index 9fb0b1ec8526..98b1483ef6a5 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -512,7 +512,7 @@ struct fsl_udc { #ifdef DEBUG #define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt "\n", \ - __FUNCTION__, ## args) + __func__, ## args) #else #define DBG(fmt, args...) do{}while(0) #endif diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index d3e702576de6..64a592cbbe7b 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -692,7 +692,7 @@ static void abort_dma(struct goku_ep *ep, int status) req->req.actual = (curr - req->req.dma) + 1; req->req.status = status; - VDBG(ep->dev, "%s %s %s %d/%d\n", __FUNCTION__, ep->ep.name, + VDBG(ep->dev, "%s %s %s %d/%d\n", __func__, ep->ep.name, ep->is_in ? "IN" : "OUT", req->req.actual, req->req.length); @@ -826,7 +826,7 @@ static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req) if (dev->ep0state == EP0_SUSPEND) return -EBUSY; - VDBG(dev, "%s %s %s %s %p\n", __FUNCTION__, _ep->name, + VDBG(dev, "%s %s %s %s %p\n", __func__, _ep->name, ep->is_in ? "IN" : "OUT", ep->dma ? "dma" : "pio", _req); @@ -898,7 +898,7 @@ static int goku_set_halt(struct usb_ep *_ep, int value) /* don't change EPxSTATUS_EP_INVALID to READY */ } else if (!ep->desc) { - DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name); + DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name); return -EINVAL; } @@ -940,7 +940,7 @@ static int goku_fifo_status(struct usb_ep *_ep) regs = ep->dev->regs; size = readl(®s->EPxSizeLA[ep->num]) & DATASIZE; size += readl(®s->EPxSizeLB[ep->num]) & DATASIZE; - VDBG(ep->dev, "%s %s %u\n", __FUNCTION__, ep->ep.name, size); + VDBG(ep->dev, "%s %s %u\n", __func__, ep->ep.name, size); return size; } @@ -953,11 +953,11 @@ static void goku_fifo_flush(struct usb_ep *_ep) if (!_ep) return; ep = container_of(_ep, struct goku_ep, ep); - VDBG(ep->dev, "%s %s\n", __FUNCTION__, ep->ep.name); + VDBG(ep->dev, "%s %s\n", __func__, ep->ep.name); /* don't change EPxSTATUS_EP_INVALID to READY */ if (!ep->desc && ep->num != 0) { - DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name); + DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name); return; } @@ -1286,7 +1286,7 @@ static void ep0_start(struct goku_udc *dev) struct goku_udc_regs __iomem *regs = dev->regs; unsigned i; - VDBG(dev, "%s\n", __FUNCTION__); + VDBG(dev, "%s\n", __func__); udc_reset(dev); udc_reinit (dev); @@ -1322,7 +1322,7 @@ static void udc_enable(struct goku_udc *dev) if (readl(&dev->regs->power_detect) & PW_DETECT) ep0_start(dev); else { - DBG(dev, "%s\n", __FUNCTION__); + DBG(dev, "%s\n", __func__); dev->int_enable = INT_PWRDETECT; writel(dev->int_enable, &dev->regs->int_enable); } @@ -1387,7 +1387,7 @@ stop_activity(struct goku_udc *dev, struct usb_gadget_driver *driver) { unsigned i; - DBG (dev, "%s\n", __FUNCTION__); + DBG (dev, "%s\n", __func__); if (dev->gadget.speed == USB_SPEED_UNKNOWN) driver = NULL; @@ -1726,7 +1726,7 @@ static void goku_remove(struct pci_dev *pdev) { struct goku_udc *dev = pci_get_drvdata(pdev); - DBG(dev, "%s\n", __FUNCTION__); + DBG(dev, "%s\n", __func__); BUG_ON(dev->driver); diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 0a6feafc8d28..69b0a2754f2a 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1107,13 +1107,13 @@ scan: switch (state) { default: - DBG (dev, "fail %s, state %d\n", __FUNCTION__, state); + DBG (dev, "fail %s, state %d\n", __func__, state); retval = -ESRCH; break; case STATE_DEV_UNCONNECTED: case STATE_DEV_CONNECTED: spin_unlock_irq (&dev->lock); - DBG (dev, "%s wait\n", __FUNCTION__); + DBG (dev, "%s wait\n", __func__); /* wait for events */ retval = wait_event_interruptible (dev->wait, @@ -1222,7 +1222,7 @@ ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) DBG(dev, "bogus ep0out stall!\n"); } } else - DBG (dev, "fail %s, state %d\n", __FUNCTION__, dev->state); + DBG (dev, "fail %s, state %d\n", __func__, dev->state); spin_unlock_irq (&dev->lock); return retval; @@ -1233,7 +1233,7 @@ ep0_fasync (int f, struct file *fd, int on) { struct dev_data *dev = fd->private_data; // caller must F_SETOWN before signal delivery happens - VDEBUG (dev, "%s %s\n", __FUNCTION__, on ? "on" : "off"); + VDEBUG (dev, "%s %s\n", __func__, on ? "on" : "off"); return fasync_helper (f, fd, on, &dev->fasync); } @@ -1575,7 +1575,7 @@ static void destroy_ep_files (struct dev_data *dev) { struct list_head *entry, *tmp; - DBG (dev, "%s %d\n", __FUNCTION__, dev->state); + DBG (dev, "%s %d\n", __func__, dev->state); /* dev->state must prevent interference */ restart: @@ -1662,7 +1662,7 @@ enomem1: put_dev (dev); kfree (data); enomem0: - DBG (dev, "%s enomem\n", __FUNCTION__); + DBG (dev, "%s enomem\n", __func__); destroy_ep_files (dev); return -ENOMEM; } @@ -1672,7 +1672,7 @@ gadgetfs_unbind (struct usb_gadget *gadget) { struct dev_data *dev = get_gadget_data (gadget); - DBG (dev, "%s\n", __FUNCTION__); + DBG (dev, "%s\n", __func__); spin_lock_irq (&dev->lock); dev->state = STATE_DEV_UNBOUND; @@ -1685,7 +1685,7 @@ gadgetfs_unbind (struct usb_gadget *gadget) /* we've already been disconnected ... no i/o is active */ if (dev->req) usb_ep_free_request (gadget->ep0, dev->req); - DBG (dev, "%s done\n", __FUNCTION__); + DBG (dev, "%s done\n", __func__); put_dev (dev); } @@ -1933,7 +1933,7 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) fail: spin_unlock_irq (&dev->lock); - pr_debug ("%s: %s fail %Zd, %p\n", shortname, __FUNCTION__, value, dev); + pr_debug ("%s: %s fail %Zd, %p\n", shortname, __func__, value, dev); kfree (dev->buf); dev->buf = NULL; return value; diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index 078f72467671..825abd2621b3 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -253,7 +253,7 @@ udc_proc_read(char *page, char **start, off_t off, int count, */ static void udc_disable(struct lh7a40x_udc *dev) { - DEBUG("%s, %p\n", __FUNCTION__, dev); + DEBUG("%s, %p\n", __func__, dev); udc_set_address(dev, 0); @@ -285,7 +285,7 @@ static void udc_reinit(struct lh7a40x_udc *dev) { u32 i; - DEBUG("%s, %p\n", __FUNCTION__, dev); + DEBUG("%s, %p\n", __func__, dev); /* device/ep0 records init */ INIT_LIST_HEAD(&dev->gadget.ep_list); @@ -318,7 +318,7 @@ static void udc_enable(struct lh7a40x_udc *dev) { int ep; - DEBUG("%s, %p\n", __FUNCTION__, dev); + DEBUG("%s, %p\n", __func__, dev); dev->gadget.speed = USB_SPEED_UNKNOWN; @@ -412,7 +412,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) struct lh7a40x_udc *dev = the_controller; int retval; - DEBUG("%s: %s\n", __FUNCTION__, driver->driver.name); + DEBUG("%s: %s\n", __func__, driver->driver.name); if (!driver || driver->speed != USB_SPEED_FULL @@ -521,7 +521,7 @@ static int write_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req) is_short = unlikely(max < ep_maxpacket(ep)); } - DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __FUNCTION__, + DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __func__, ep->ep.name, count, is_last ? "/L" : "", is_short ? "/S" : "", req->req.length - req->req.actual, req); @@ -555,7 +555,7 @@ static int read_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req) /* make sure there's a packet in the FIFO. */ csr = usb_read(ep->csr1); if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY)) { - DEBUG("%s: Packet NOT ready!\n", __FUNCTION__); + DEBUG("%s: Packet NOT ready!\n", __func__); return -EINVAL; } @@ -614,7 +614,7 @@ static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req, int status) unsigned int stopped = ep->stopped; u32 index; - DEBUG("%s, %p\n", __FUNCTION__, ep); + DEBUG("%s, %p\n", __func__, ep); list_del_init(&req->queue); if (likely(req->req.status == -EINPROGRESS)) @@ -644,7 +644,7 @@ static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req, int status) /** Enable EP interrupt */ static void pio_irq_enable(int ep) { - DEBUG("%s: %d\n", __FUNCTION__, ep); + DEBUG("%s: %d\n", __func__, ep); switch (ep) { case 1: @@ -665,7 +665,7 @@ static void pio_irq_enable(int ep) /** Disable EP interrupt */ static void pio_irq_disable(int ep) { - DEBUG("%s: %d\n", __FUNCTION__, ep); + DEBUG("%s: %d\n", __func__, ep); switch (ep) { case 1: @@ -690,7 +690,7 @@ void nuke(struct lh7a40x_ep *ep, int status) { struct lh7a40x_request *req; - DEBUG("%s, %p\n", __FUNCTION__, ep); + DEBUG("%s, %p\n", __func__, ep); /* Flush FIFO */ flush(ep); @@ -734,7 +734,7 @@ static void flush_all(struct lh7a40x_udc *dev) */ static void flush(struct lh7a40x_ep *ep) { - DEBUG("%s, %p\n", __FUNCTION__, ep); + DEBUG("%s, %p\n", __func__, ep); switch (ep->ep_type) { case ep_control: @@ -766,7 +766,7 @@ static void lh7a40x_in_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) usb_set_index(ep_idx); csr = usb_read(ep->csr1); - DEBUG("%s: %d, csr %x\n", __FUNCTION__, ep_idx, csr); + DEBUG("%s: %d, csr %x\n", __func__, ep_idx, csr); if (csr & USB_IN_CSR1_SENT_STALL) { DEBUG("USB_IN_CSR1_SENT_STALL\n"); @@ -776,7 +776,7 @@ static void lh7a40x_in_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) } if (!ep->desc) { - DEBUG("%s: NO EP DESC\n", __FUNCTION__); + DEBUG("%s: NO EP DESC\n", __func__); return; } @@ -802,7 +802,7 @@ static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) struct lh7a40x_ep *ep = &dev->ep[ep_idx]; struct lh7a40x_request *req; - DEBUG("%s: %d\n", __FUNCTION__, ep_idx); + DEBUG("%s: %d\n", __func__, ep_idx); usb_set_index(ep_idx); @@ -814,11 +814,11 @@ static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) usb_read(ep-> csr1)) & (USB_OUT_CSR1_OUT_PKT_RDY | USB_OUT_CSR1_SENT_STALL)) { - DEBUG("%s: %x\n", __FUNCTION__, csr); + DEBUG("%s: %x\n", __func__, csr); if (csr & USB_OUT_CSR1_SENT_STALL) { DEBUG("%s: stall sent, flush fifo\n", - __FUNCTION__); + __func__); /* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */ flush(ep); } else if (csr & USB_OUT_CSR1_OUT_PKT_RDY) { @@ -832,7 +832,7 @@ static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) if (!req) { printk("%s: NULL REQ %d\n", - __FUNCTION__, ep_idx); + __func__, ep_idx); flush(ep); break; } else { @@ -844,7 +844,7 @@ static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) } else { /* Throw packet away.. */ - printk("%s: No descriptor?!?\n", __FUNCTION__); + printk("%s: No descriptor?!?\n", __func__); flush(ep); } } @@ -886,7 +886,7 @@ static void lh7a40x_reset_intr(struct lh7a40x_udc *dev) #if 0 /* def CONFIG_ARCH_LH7A404 */ /* Does not work always... */ - DEBUG("%s: %d\n", __FUNCTION__, dev->usb_address); + DEBUG("%s: %d\n", __func__, dev->usb_address); if (!dev->usb_address) { /*usb_set(USB_RESET_IO, USB_RESET); @@ -936,7 +936,7 @@ static irqreturn_t lh7a40x_udc_irq(int irq, void *_dev) if (!intr_out && !intr_in && !intr_int) break; - DEBUG("%s (on state %s)\n", __FUNCTION__, + DEBUG("%s (on state %s)\n", __func__, state_names[dev->ep0state]); DEBUG("intr_out = %x\n", intr_out); DEBUG("intr_in = %x\n", intr_in); @@ -1016,14 +1016,14 @@ static int lh7a40x_ep_enable(struct usb_ep *_ep, struct lh7a40x_udc *dev; unsigned long flags; - DEBUG("%s, %p\n", __FUNCTION__, _ep); + DEBUG("%s, %p\n", __func__, _ep); ep = container_of(_ep, struct lh7a40x_ep, ep); if (!_ep || !desc || ep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress || ep_maxpacket(ep) < le16_to_cpu(desc->wMaxPacketSize)) { - DEBUG("%s, bad ep or descriptor\n", __FUNCTION__); + DEBUG("%s, bad ep or descriptor\n", __func__); return -EINVAL; } @@ -1031,7 +1031,7 @@ static int lh7a40x_ep_enable(struct usb_ep *_ep, if (ep->bmAttributes != desc->bmAttributes && ep->bmAttributes != USB_ENDPOINT_XFER_BULK && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { - DEBUG("%s, %s type mismatch\n", __FUNCTION__, _ep->name); + DEBUG("%s, %s type mismatch\n", __func__, _ep->name); return -EINVAL; } @@ -1039,13 +1039,13 @@ static int lh7a40x_ep_enable(struct usb_ep *_ep, if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(ep)) || !desc->wMaxPacketSize) { - DEBUG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name); + DEBUG("%s, bad %s maxpacket\n", __func__, _ep->name); return -ERANGE; } dev = ep->dev; if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { - DEBUG("%s, bogus device state\n", __FUNCTION__); + DEBUG("%s, bogus device state\n", __func__); return -ESHUTDOWN; } @@ -1061,7 +1061,7 @@ static int lh7a40x_ep_enable(struct usb_ep *_ep, /* Reset halt state (does flush) */ lh7a40x_set_halt(_ep, 0); - DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name); + DEBUG("%s: enabled %s\n", __func__, _ep->name); return 0; } @@ -1073,11 +1073,11 @@ static int lh7a40x_ep_disable(struct usb_ep *_ep) struct lh7a40x_ep *ep; unsigned long flags; - DEBUG("%s, %p\n", __FUNCTION__, _ep); + DEBUG("%s, %p\n", __func__, _ep); ep = container_of(_ep, struct lh7a40x_ep, ep); if (!_ep || !ep->desc) { - DEBUG("%s, %s not enabled\n", __FUNCTION__, + DEBUG("%s, %s not enabled\n", __func__, _ep ? ep->ep.name : NULL); return -EINVAL; } @@ -1097,7 +1097,7 @@ static int lh7a40x_ep_disable(struct usb_ep *_ep) spin_unlock_irqrestore(&ep->dev->lock, flags); - DEBUG("%s: disabled %s\n", __FUNCTION__, _ep->name); + DEBUG("%s: disabled %s\n", __func__, _ep->name); return 0; } @@ -1106,7 +1106,7 @@ static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, { struct lh7a40x_request *req; - DEBUG("%s, %p\n", __FUNCTION__, ep); + DEBUG("%s, %p\n", __func__, ep); req = kzalloc(sizeof(*req), gfp_flags); if (!req) @@ -1121,7 +1121,7 @@ static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *_req) { struct lh7a40x_request *req; - DEBUG("%s, %p\n", __FUNCTION__, ep); + DEBUG("%s, %p\n", __func__, ep); req = container_of(_req, struct lh7a40x_request, req); WARN_ON(!list_empty(&req->queue)); @@ -1140,25 +1140,25 @@ static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req, struct lh7a40x_udc *dev; unsigned long flags; - DEBUG("\n\n\n%s, %p\n", __FUNCTION__, _ep); + DEBUG("\n\n\n%s, %p\n", __func__, _ep); req = container_of(_req, struct lh7a40x_request, req); if (unlikely (!_req || !_req->complete || !_req->buf || !list_empty(&req->queue))) { - DEBUG("%s, bad params\n", __FUNCTION__); + DEBUG("%s, bad params\n", __func__); return -EINVAL; } ep = container_of(_ep, struct lh7a40x_ep, ep); if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { - DEBUG("%s, bad ep\n", __FUNCTION__); + DEBUG("%s, bad ep\n", __func__); return -EINVAL; } dev = ep->dev; if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { - DEBUG("%s, bogus device state %p\n", __FUNCTION__, dev->driver); + DEBUG("%s, bogus device state %p\n", __func__, dev->driver); return -ESHUTDOWN; } @@ -1218,7 +1218,7 @@ static int lh7a40x_dequeue(struct usb_ep *_ep, struct usb_request *_req) struct lh7a40x_request *req; unsigned long flags; - DEBUG("%s, %p\n", __FUNCTION__, _ep); + DEBUG("%s, %p\n", __func__, _ep); ep = container_of(_ep, struct lh7a40x_ep, ep); if (!_ep || ep->ep.name == ep0name) @@ -1253,13 +1253,13 @@ static int lh7a40x_set_halt(struct usb_ep *_ep, int value) ep = container_of(_ep, struct lh7a40x_ep, ep); if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { - DEBUG("%s, bad ep\n", __FUNCTION__); + DEBUG("%s, bad ep\n", __func__); return -EINVAL; } usb_set_index(ep_index(ep)); - DEBUG("%s, ep %d, val %d\n", __FUNCTION__, ep_index(ep), value); + DEBUG("%s, ep %d, val %d\n", __func__, ep_index(ep), value); spin_lock_irqsave(&ep->dev->lock, flags); @@ -1325,11 +1325,11 @@ static int lh7a40x_fifo_status(struct usb_ep *_ep) ep = container_of(_ep, struct lh7a40x_ep, ep); if (!_ep) { - DEBUG("%s, bad ep\n", __FUNCTION__); + DEBUG("%s, bad ep\n", __func__); return -ENODEV; } - DEBUG("%s, %d\n", __FUNCTION__, ep_index(ep)); + DEBUG("%s, %d\n", __func__, ep_index(ep)); /* LPD can't report unclaimed bytes from IN fifos */ if (ep_is_in(ep)) @@ -1355,7 +1355,7 @@ static void lh7a40x_fifo_flush(struct usb_ep *_ep) ep = container_of(_ep, struct lh7a40x_ep, ep); if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { - DEBUG("%s, bad ep\n", __FUNCTION__); + DEBUG("%s, bad ep\n", __func__); return; } @@ -1376,7 +1376,7 @@ static int write_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req) max = ep_maxpacket(ep); - DEBUG_EP0("%s\n", __FUNCTION__); + DEBUG_EP0("%s\n", __func__); count = write_packet(ep, req, max); @@ -1390,7 +1390,7 @@ static int write_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req) is_last = 1; } - DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __FUNCTION__, + DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __func__, ep->ep.name, count, is_last ? "/L" : "", req->req.length - req->req.actual, req); @@ -1434,7 +1434,7 @@ static int read_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req) unsigned bufferspace, count, is_short; volatile u32 *fifo = (volatile u32 *)ep->fifo; - DEBUG_EP0("%s\n", __FUNCTION__); + DEBUG_EP0("%s\n", __func__); csr = usb_read(USB_EP0_CSR); if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY)) @@ -1492,7 +1492,7 @@ static int read_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req) */ static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address) { - DEBUG_EP0("%s: %d\n", __FUNCTION__, address); + DEBUG_EP0("%s: %d\n", __func__, address); /* c.f. 15.1.2.2 Table 15-4 address will be used after DATA_END is set */ dev->usb_address = address; usb_set((address & USB_FA_FUNCTION_ADDR), USB_FA); @@ -1514,7 +1514,7 @@ static void lh7a40x_ep0_out(struct lh7a40x_udc *dev, u32 csr) struct lh7a40x_ep *ep = &dev->ep[0]; int ret; - DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + DEBUG_EP0("%s: %x\n", __func__, csr); if (list_empty(&ep->queue)) req = 0; @@ -1533,13 +1533,13 @@ static void lh7a40x_ep0_out(struct lh7a40x_udc *dev, u32 csr) if (ret) { /* Done! */ DEBUG_EP0("%s: finished, waiting for status\n", - __FUNCTION__); + __func__); usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR); dev->ep0state = WAIT_FOR_SETUP; } else { /* Not done yet.. */ - DEBUG_EP0("%s: not finished\n", __FUNCTION__); + DEBUG_EP0("%s: not finished\n", __func__); usb_set(EP0_CLR_OUT, USB_EP0_CSR); } } else { @@ -1556,7 +1556,7 @@ static int lh7a40x_ep0_in(struct lh7a40x_udc *dev, u32 csr) struct lh7a40x_ep *ep = &dev->ep[0]; int ret, need_zlp = 0; - DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + DEBUG_EP0("%s: %x\n", __func__, csr); if (list_empty(&ep->queue)) req = 0; @@ -1564,7 +1564,7 @@ static int lh7a40x_ep0_in(struct lh7a40x_udc *dev, u32 csr) req = list_entry(ep->queue.next, struct lh7a40x_request, queue); if (!req) { - DEBUG_EP0("%s: NULL REQ\n", __FUNCTION__); + DEBUG_EP0("%s: NULL REQ\n", __func__); return 0; } @@ -1585,17 +1585,17 @@ static int lh7a40x_ep0_in(struct lh7a40x_udc *dev, u32 csr) if (ret == 1 && !need_zlp) { /* Last packet */ - DEBUG_EP0("%s: finished, waiting for status\n", __FUNCTION__); + DEBUG_EP0("%s: finished, waiting for status\n", __func__); usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR); dev->ep0state = WAIT_FOR_SETUP; } else { - DEBUG_EP0("%s: not finished\n", __FUNCTION__); + DEBUG_EP0("%s: not finished\n", __func__); usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR); } if (need_zlp) { - DEBUG_EP0("%s: Need ZLP!\n", __FUNCTION__); + DEBUG_EP0("%s: Need ZLP!\n", __func__); usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR); dev->ep0state = DATA_STATE_NEED_ZLP; } @@ -1694,7 +1694,7 @@ static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr) struct usb_ctrlrequest ctrl; int i, bytes, is_in; - DEBUG_SETUP("%s: %x\n", __FUNCTION__, csr); + DEBUG_SETUP("%s: %x\n", __func__, csr); /* Nuke all previous transfers */ nuke(ep, -EPROTO); @@ -1799,7 +1799,7 @@ static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr) */ static void lh7a40x_ep0_in_zlp(struct lh7a40x_udc *dev, u32 csr) { - DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + DEBUG_EP0("%s: %x\n", __func__, csr); /* c.f. Table 15-14 */ usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR); @@ -1818,7 +1818,7 @@ static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr) usb_set_index(0); csr = usb_read(USB_EP0_CSR); - DEBUG_EP0("%s: csr = %x\n", __FUNCTION__, csr); + DEBUG_EP0("%s: csr = %x\n", __func__, csr); /* * For overview of what we should be doing see c.f. Chapter 18.1.2.4 @@ -1832,7 +1832,7 @@ static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr) * - clear the SENT_STALL bit */ if (csr & EP0_SENT_STALL) { - DEBUG_EP0("%s: EP0_SENT_STALL is set: %x\n", __FUNCTION__, csr); + DEBUG_EP0("%s: EP0_SENT_STALL is set: %x\n", __func__, csr); usb_clear((EP0_SENT_STALL | EP0_SEND_STALL), USB_EP0_CSR); nuke(ep, -ECONNABORTED); dev->ep0state = WAIT_FOR_SETUP; @@ -1849,7 +1849,7 @@ static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr) */ if (!(csr & (EP0_IN_PKT_RDY | EP0_OUT_PKT_RDY))) { DEBUG_EP0("%s: IN_PKT_RDY and OUT_PKT_RDY are clear\n", - __FUNCTION__); + __func__); switch (dev->ep0state) { case DATA_STATE_XMIT: @@ -1877,7 +1877,7 @@ static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr) * - set SERVICED_SETUP_END_BIT */ if (csr & EP0_SETUP_END) { - DEBUG_EP0("%s: EP0_SETUP_END is set: %x\n", __FUNCTION__, csr); + DEBUG_EP0("%s: EP0_SETUP_END is set: %x\n", __func__, csr); usb_set(EP0_CLR_SETUP_END, USB_EP0_CSR); @@ -1896,7 +1896,7 @@ static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr) */ if (csr & EP0_OUT_PKT_RDY) { - DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __FUNCTION__, + DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __func__, csr); switch (dev->ep0state) { @@ -1926,7 +1926,7 @@ static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep) usb_set_index(0); csr = usb_read(USB_EP0_CSR); - DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + DEBUG_EP0("%s: %x\n", __func__, csr); /* Clear "out packet ready" */ usb_set(EP0_CLR_OUT, USB_EP0_CSR); @@ -1949,7 +1949,7 @@ static int lh7a40x_udc_get_frame(struct usb_gadget *_gadget) { u32 frame1 = usb_read(USB_FRM_NUM1); /* Least significant 8 bits */ u32 frame2 = usb_read(USB_FRM_NUM2); /* Most significant 3 bits */ - DEBUG("%s, %p\n", __FUNCTION__, _gadget); + DEBUG("%s, %p\n", __func__, _gadget); return ((frame2 & 0x07) << 8) | (frame1 & 0xff); } @@ -1970,7 +1970,7 @@ static const struct usb_gadget_ops lh7a40x_udc_ops = { static void nop_release(struct device *dev) { - DEBUG("%s %s\n", __FUNCTION__, dev->bus_id); + DEBUG("%s %s\n", __func__, dev->bus_id); } static struct lh7a40x_udc memory = { @@ -2065,7 +2065,7 @@ static int lh7a40x_udc_probe(struct platform_device *pdev) struct lh7a40x_udc *dev = &memory; int retval; - DEBUG("%s: %p\n", __FUNCTION__, pdev); + DEBUG("%s: %p\n", __func__, pdev); spin_lock_init(&dev->lock); dev->dev = &pdev->dev; @@ -2098,7 +2098,7 @@ static int lh7a40x_udc_remove(struct platform_device *pdev) { struct lh7a40x_udc *dev = platform_get_drvdata(pdev); - DEBUG("%s: %p\n", __FUNCTION__, pdev); + DEBUG("%s: %p\n", __func__, pdev); if (dev->driver) return -EBUSY; @@ -2131,7 +2131,7 @@ static struct platform_driver udc_driver = { static int __init udc_init(void) { - DEBUG("%s: %s version %s\n", __FUNCTION__, driver_name, DRIVER_VERSION); + DEBUG("%s: %s version %s\n", __func__, driver_name, DRIVER_VERSION); return platform_driver_register(&udc_driver); } diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h index 44ca139983d8..1f2af398a9a4 100644 --- a/drivers/usb/gadget/net2280.h +++ b/drivers/usb/gadget/net2280.h @@ -299,7 +299,7 @@ static inline void assert_out_naking (struct net2280_ep *ep, const char *where) &ep->regs->ep_rsp); } } -#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep,__FUNCTION__) +#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep,__func__) #else #define ASSERT_OUT_NAKING(ep) do {} while (0) #endif diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 56277d24f041..95f7662376f1 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -163,7 +163,7 @@ static int omap_ep_enable(struct usb_ep *_ep, || ep->bEndpointAddress != desc->bEndpointAddress || ep->maxpacket < le16_to_cpu (desc->wMaxPacketSize)) { - DBG("%s, bad ep or descriptor\n", __FUNCTION__); + DBG("%s, bad ep or descriptor\n", __func__); return -EINVAL; } maxp = le16_to_cpu (desc->wMaxPacketSize); @@ -171,7 +171,7 @@ static int omap_ep_enable(struct usb_ep *_ep, && maxp != ep->maxpacket) || le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket || !desc->wMaxPacketSize) { - DBG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name); + DBG("%s, bad %s maxpacket\n", __func__, _ep->name); return -ERANGE; } @@ -194,13 +194,13 @@ static int omap_ep_enable(struct usb_ep *_ep, if (ep->bmAttributes != desc->bmAttributes && ep->bmAttributes != USB_ENDPOINT_XFER_BULK && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { - DBG("%s, %s type mismatch\n", __FUNCTION__, _ep->name); + DBG("%s, %s type mismatch\n", __func__, _ep->name); return -EINVAL; } udc = ep->udc; if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { - DBG("%s, bogus device state\n", __FUNCTION__); + DBG("%s, bogus device state\n", __func__); return -ESHUTDOWN; } @@ -249,7 +249,7 @@ static int omap_ep_disable(struct usb_ep *_ep) unsigned long flags; if (!_ep || !ep->desc) { - DBG("%s, %s not enabled\n", __FUNCTION__, + DBG("%s, %s not enabled\n", __func__, _ep ? ep->ep.name : NULL); return -EINVAL; } @@ -936,11 +936,11 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* catch various bogus parameters */ if (!_req || !req->req.complete || !req->req.buf || !list_empty(&req->queue)) { - DBG("%s, bad params\n", __FUNCTION__); + DBG("%s, bad params\n", __func__); return -EINVAL; } if (!_ep || (!ep->desc && ep->bEndpointAddress)) { - DBG("%s, bad ep\n", __FUNCTION__); + DBG("%s, bad ep\n", __func__); return -EINVAL; } if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { @@ -959,7 +959,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) && (ep->bEndpointAddress & USB_DIR_IN) == 0 && !cpu_class_is_omap2() && (req->req.length % ep->ep.maxpacket) != 0) { - DBG("%s, no partial packet OUT reads\n", __FUNCTION__); + DBG("%s, no partial packet OUT reads\n", __func__); return -EMSGSIZE; } diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index ecc1410073f4..76be75e3ab8f 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -915,7 +915,7 @@ static void printer_reset_interface(struct printer_dev *dev) if (dev->interface < 0) return; - DBG(dev, "%s\n", __FUNCTION__); + DBG(dev, "%s\n", __func__); if (dev->in) usb_ep_disable(dev->in_ep); @@ -1284,7 +1284,7 @@ printer_disconnect(struct usb_gadget *gadget) struct printer_dev *dev = get_gadget_data(gadget); unsigned long flags; - DBG(dev, "%s\n", __FUNCTION__); + DBG(dev, "%s\n", __func__); spin_lock_irqsave(&dev->lock, flags); @@ -1300,7 +1300,7 @@ printer_unbind(struct usb_gadget *gadget) struct usb_request *req; - DBG(dev, "%s\n", __FUNCTION__); + DBG(dev, "%s\n", __func__); /* Remove sysfs files */ device_destroy(usb_gadget_class, g_printer_devno); diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index c00cd8b9d3d1..08f699b1fc57 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -235,7 +235,7 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep, || ep->bEndpointAddress != desc->bEndpointAddress || ep->fifo_size < le16_to_cpu (desc->wMaxPacketSize)) { - DMSG("%s, bad ep or descriptor\n", __FUNCTION__); + DMSG("%s, bad ep or descriptor\n", __func__); return -EINVAL; } @@ -243,7 +243,7 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep, if (ep->bmAttributes != desc->bmAttributes && ep->bmAttributes != USB_ENDPOINT_XFER_BULK && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { - DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name); + DMSG("%s, %s type mismatch\n", __func__, _ep->name); return -EINVAL; } @@ -252,13 +252,13 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep, && le16_to_cpu (desc->wMaxPacketSize) != BULK_FIFO_SIZE) || !desc->wMaxPacketSize) { - DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name); + DMSG("%s, bad %s maxpacket\n", __func__, _ep->name); return -ERANGE; } dev = ep->dev; if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { - DMSG("%s, bogus device state\n", __FUNCTION__); + DMSG("%s, bogus device state\n", __func__); return -ESHUTDOWN; } @@ -283,7 +283,7 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep) ep = container_of (_ep, struct pxa2xx_ep, ep); if (!_ep || !ep->desc) { - DMSG("%s, %s not enabled\n", __FUNCTION__, + DMSG("%s, %s not enabled\n", __func__, _ep ? ep->ep.name : NULL); return -EINVAL; } @@ -461,7 +461,7 @@ void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag) USIR0 = USIR0_IR0; dev->req_pending = 0; DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n", - __FUNCTION__, tag, UDCCS0, flags); + __func__, tag, UDCCS0, flags); } static int @@ -651,20 +651,20 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) req = container_of(_req, struct pxa2xx_request, req); if (unlikely (!_req || !_req->complete || !_req->buf || !list_empty(&req->queue))) { - DMSG("%s, bad params\n", __FUNCTION__); + DMSG("%s, bad params\n", __func__); return -EINVAL; } ep = container_of(_ep, struct pxa2xx_ep, ep); if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { - DMSG("%s, bad ep\n", __FUNCTION__); + DMSG("%s, bad ep\n", __func__); return -EINVAL; } dev = ep->dev; if (unlikely (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { - DMSG("%s, bogus device state\n", __FUNCTION__); + DMSG("%s, bogus device state\n", __func__); return -ESHUTDOWN; } @@ -807,7 +807,7 @@ static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value) if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name)) || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { - DMSG("%s, bad ep\n", __FUNCTION__); + DMSG("%s, bad ep\n", __func__); return -EINVAL; } if (value == 0) { @@ -859,7 +859,7 @@ static int pxa2xx_ep_fifo_status(struct usb_ep *_ep) ep = container_of(_ep, struct pxa2xx_ep, ep); if (!_ep) { - DMSG("%s, bad ep\n", __FUNCTION__); + DMSG("%s, bad ep\n", __func__); return -ENODEV; } /* pxa can't report unclaimed bytes from IN fifos */ @@ -878,7 +878,7 @@ static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep) ep = container_of(_ep, struct pxa2xx_ep, ep); if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) { - DMSG("%s, bad ep\n", __FUNCTION__); + DMSG("%s, bad ep\n", __func__); return; } @@ -1813,7 +1813,7 @@ pxa2xx_udc_irq(int irq, void *_dev) static void nop_release (struct device *dev) { - DMSG("%s %s\n", __FUNCTION__, dev->bus_id); + DMSG("%s %s\n", __func__, dev->bus_id); } /* this uses load-time allocation and initialization (instead of diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 934911ee5c72..bd58dd504f6f 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -204,7 +204,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_SUPPORTED_LIST: - DBG("%s: OID_GEN_SUPPORTED_LIST\n", __FUNCTION__); + DBG("%s: OID_GEN_SUPPORTED_LIST\n", __func__); length = sizeof (oid_supported_list); count = length / sizeof (u32); for (i = 0; i < count; i++) @@ -214,7 +214,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_HARDWARE_STATUS: - DBG("%s: OID_GEN_HARDWARE_STATUS\n", __FUNCTION__); + DBG("%s: OID_GEN_HARDWARE_STATUS\n", __func__); /* Bogus question! * Hardware must be ready to receive high level protocols. * BTW: @@ -227,14 +227,14 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_MEDIA_SUPPORTED: - DBG("%s: OID_GEN_MEDIA_SUPPORTED\n", __FUNCTION__); + DBG("%s: OID_GEN_MEDIA_SUPPORTED\n", __func__); *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr].medium); retval = 0; break; /* mandatory */ case OID_GEN_MEDIA_IN_USE: - DBG("%s: OID_GEN_MEDIA_IN_USE\n", __FUNCTION__); + DBG("%s: OID_GEN_MEDIA_IN_USE\n", __func__); /* one medium, one transport... (maybe you do it better) */ *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr].medium); retval = 0; @@ -242,7 +242,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_MAXIMUM_FRAME_SIZE: - DBG("%s: OID_GEN_MAXIMUM_FRAME_SIZE\n", __FUNCTION__); + DBG("%s: OID_GEN_MAXIMUM_FRAME_SIZE\n", __func__); if (rndis_per_dev_params [configNr].dev) { *outbuf = cpu_to_le32 ( rndis_per_dev_params [configNr].dev->mtu); @@ -253,7 +253,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_LINK_SPEED: if (rndis_debug > 1) - DBG("%s: OID_GEN_LINK_SPEED\n", __FUNCTION__); + DBG("%s: OID_GEN_LINK_SPEED\n", __func__); if (rndis_per_dev_params [configNr].media_state == NDIS_MEDIA_STATE_DISCONNECTED) *outbuf = __constant_cpu_to_le32 (0); @@ -265,7 +265,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_TRANSMIT_BLOCK_SIZE: - DBG("%s: OID_GEN_TRANSMIT_BLOCK_SIZE\n", __FUNCTION__); + DBG("%s: OID_GEN_TRANSMIT_BLOCK_SIZE\n", __func__); if (rndis_per_dev_params [configNr].dev) { *outbuf = cpu_to_le32 ( rndis_per_dev_params [configNr].dev->mtu); @@ -275,7 +275,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_RECEIVE_BLOCK_SIZE: - DBG("%s: OID_GEN_RECEIVE_BLOCK_SIZE\n", __FUNCTION__); + DBG("%s: OID_GEN_RECEIVE_BLOCK_SIZE\n", __func__); if (rndis_per_dev_params [configNr].dev) { *outbuf = cpu_to_le32 ( rndis_per_dev_params [configNr].dev->mtu); @@ -285,7 +285,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_VENDOR_ID: - DBG("%s: OID_GEN_VENDOR_ID\n", __FUNCTION__); + DBG("%s: OID_GEN_VENDOR_ID\n", __func__); *outbuf = cpu_to_le32 ( rndis_per_dev_params [configNr].vendorID); retval = 0; @@ -293,7 +293,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_VENDOR_DESCRIPTION: - DBG("%s: OID_GEN_VENDOR_DESCRIPTION\n", __FUNCTION__); + DBG("%s: OID_GEN_VENDOR_DESCRIPTION\n", __func__); length = strlen (rndis_per_dev_params [configNr].vendorDescr); memcpy (outbuf, rndis_per_dev_params [configNr].vendorDescr, length); @@ -301,7 +301,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_VENDOR_DRIVER_VERSION: - DBG("%s: OID_GEN_VENDOR_DRIVER_VERSION\n", __FUNCTION__); + DBG("%s: OID_GEN_VENDOR_DRIVER_VERSION\n", __func__); /* Created as LE */ *outbuf = rndis_driver_version; retval = 0; @@ -309,14 +309,14 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_CURRENT_PACKET_FILTER: - DBG("%s: OID_GEN_CURRENT_PACKET_FILTER\n", __FUNCTION__); + DBG("%s: OID_GEN_CURRENT_PACKET_FILTER\n", __func__); *outbuf = cpu_to_le32 (*rndis_per_dev_params[configNr].filter); retval = 0; break; /* mandatory */ case OID_GEN_MAXIMUM_TOTAL_SIZE: - DBG("%s: OID_GEN_MAXIMUM_TOTAL_SIZE\n", __FUNCTION__); + DBG("%s: OID_GEN_MAXIMUM_TOTAL_SIZE\n", __func__); *outbuf = __constant_cpu_to_le32(RNDIS_MAX_TOTAL_SIZE); retval = 0; break; @@ -324,14 +324,14 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_MEDIA_CONNECT_STATUS: if (rndis_debug > 1) - DBG("%s: OID_GEN_MEDIA_CONNECT_STATUS\n", __FUNCTION__); + DBG("%s: OID_GEN_MEDIA_CONNECT_STATUS\n", __func__); *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .media_state); retval = 0; break; case OID_GEN_PHYSICAL_MEDIUM: - DBG("%s: OID_GEN_PHYSICAL_MEDIUM\n", __FUNCTION__); + DBG("%s: OID_GEN_PHYSICAL_MEDIUM\n", __func__); *outbuf = __constant_cpu_to_le32 (0); retval = 0; break; @@ -341,7 +341,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, * versions emit undefined RNDIS messages. DOCUMENT ALL THESE! */ case OID_GEN_MAC_OPTIONS: /* from WinME */ - DBG("%s: OID_GEN_MAC_OPTIONS\n", __FUNCTION__); + DBG("%s: OID_GEN_MAC_OPTIONS\n", __func__); *outbuf = __constant_cpu_to_le32( NDIS_MAC_OPTION_RECEIVE_SERIALIZED | NDIS_MAC_OPTION_FULL_DUPLEX); @@ -353,7 +353,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_XMIT_OK: if (rndis_debug > 1) - DBG("%s: OID_GEN_XMIT_OK\n", __FUNCTION__); + DBG("%s: OID_GEN_XMIT_OK\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 ( rndis_per_dev_params [configNr].stats->tx_packets - @@ -366,7 +366,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_RCV_OK: if (rndis_debug > 1) - DBG("%s: OID_GEN_RCV_OK\n", __FUNCTION__); + DBG("%s: OID_GEN_RCV_OK\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 ( rndis_per_dev_params [configNr].stats->rx_packets - @@ -379,7 +379,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_XMIT_ERROR: if (rndis_debug > 1) - DBG("%s: OID_GEN_XMIT_ERROR\n", __FUNCTION__); + DBG("%s: OID_GEN_XMIT_ERROR\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->tx_errors); @@ -390,7 +390,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_RCV_ERROR: if (rndis_debug > 1) - DBG("%s: OID_GEN_RCV_ERROR\n", __FUNCTION__); + DBG("%s: OID_GEN_RCV_ERROR\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->rx_errors); @@ -400,7 +400,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_RCV_NO_BUFFER: - DBG("%s: OID_GEN_RCV_NO_BUFFER\n", __FUNCTION__); + DBG("%s: OID_GEN_RCV_NO_BUFFER\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->rx_dropped); @@ -410,7 +410,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, #ifdef RNDIS_OPTIONAL_STATS case OID_GEN_DIRECTED_BYTES_XMIT: - DBG("%s: OID_GEN_DIRECTED_BYTES_XMIT\n", __FUNCTION__); + DBG("%s: OID_GEN_DIRECTED_BYTES_XMIT\n", __func__); /* * Aunt Tilly's size of shoes * minus antarctica count of penguins @@ -430,7 +430,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_DIRECTED_FRAMES_XMIT: - DBG("%s: OID_GEN_DIRECTED_FRAMES_XMIT\n", __FUNCTION__); + DBG("%s: OID_GEN_DIRECTED_FRAMES_XMIT\n", __func__); /* dito */ if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 ( @@ -446,7 +446,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_MULTICAST_BYTES_XMIT: - DBG("%s: OID_GEN_MULTICAST_BYTES_XMIT\n", __FUNCTION__); + DBG("%s: OID_GEN_MULTICAST_BYTES_XMIT\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->multicast*1234); @@ -455,7 +455,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_MULTICAST_FRAMES_XMIT: - DBG("%s: OID_GEN_MULTICAST_FRAMES_XMIT\n", __FUNCTION__); + DBG("%s: OID_GEN_MULTICAST_FRAMES_XMIT\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->multicast); @@ -464,7 +464,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_BROADCAST_BYTES_XMIT: - DBG("%s: OID_GEN_BROADCAST_BYTES_XMIT\n", __FUNCTION__); + DBG("%s: OID_GEN_BROADCAST_BYTES_XMIT\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->tx_packets/42*255); @@ -473,7 +473,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_BROADCAST_FRAMES_XMIT: - DBG("%s: OID_GEN_BROADCAST_FRAMES_XMIT\n", __FUNCTION__); + DBG("%s: OID_GEN_BROADCAST_FRAMES_XMIT\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->tx_packets/42); @@ -482,19 +482,19 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_DIRECTED_BYTES_RCV: - DBG("%s: OID_GEN_DIRECTED_BYTES_RCV\n", __FUNCTION__); + DBG("%s: OID_GEN_DIRECTED_BYTES_RCV\n", __func__); *outbuf = __constant_cpu_to_le32 (0); retval = 0; break; case OID_GEN_DIRECTED_FRAMES_RCV: - DBG("%s: OID_GEN_DIRECTED_FRAMES_RCV\n", __FUNCTION__); + DBG("%s: OID_GEN_DIRECTED_FRAMES_RCV\n", __func__); *outbuf = __constant_cpu_to_le32 (0); retval = 0; break; case OID_GEN_MULTICAST_BYTES_RCV: - DBG("%s: OID_GEN_MULTICAST_BYTES_RCV\n", __FUNCTION__); + DBG("%s: OID_GEN_MULTICAST_BYTES_RCV\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->multicast * 1111); @@ -503,7 +503,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_MULTICAST_FRAMES_RCV: - DBG("%s: OID_GEN_MULTICAST_FRAMES_RCV\n", __FUNCTION__); + DBG("%s: OID_GEN_MULTICAST_FRAMES_RCV\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->multicast); @@ -512,7 +512,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_BROADCAST_BYTES_RCV: - DBG("%s: OID_GEN_BROADCAST_BYTES_RCV\n", __FUNCTION__); + DBG("%s: OID_GEN_BROADCAST_BYTES_RCV\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->rx_packets/42*255); @@ -521,7 +521,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_BROADCAST_FRAMES_RCV: - DBG("%s: OID_GEN_BROADCAST_FRAMES_RCV\n", __FUNCTION__); + DBG("%s: OID_GEN_BROADCAST_FRAMES_RCV\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->rx_packets/42); @@ -530,7 +530,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_RCV_CRC_ERROR: - DBG("%s: OID_GEN_RCV_CRC_ERROR\n", __FUNCTION__); + DBG("%s: OID_GEN_RCV_CRC_ERROR\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->rx_crc_errors); @@ -539,7 +539,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, break; case OID_GEN_TRANSMIT_QUEUE_LENGTH: - DBG("%s: OID_GEN_TRANSMIT_QUEUE_LENGTH\n", __FUNCTION__); + DBG("%s: OID_GEN_TRANSMIT_QUEUE_LENGTH\n", __func__); *outbuf = __constant_cpu_to_le32 (0); retval = 0; break; @@ -549,7 +549,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_802_3_PERMANENT_ADDRESS: - DBG("%s: OID_802_3_PERMANENT_ADDRESS\n", __FUNCTION__); + DBG("%s: OID_802_3_PERMANENT_ADDRESS\n", __func__); if (rndis_per_dev_params [configNr].dev) { length = ETH_ALEN; memcpy (outbuf, @@ -561,7 +561,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_802_3_CURRENT_ADDRESS: - DBG("%s: OID_802_3_CURRENT_ADDRESS\n", __FUNCTION__); + DBG("%s: OID_802_3_CURRENT_ADDRESS\n", __func__); if (rndis_per_dev_params [configNr].dev) { length = ETH_ALEN; memcpy (outbuf, @@ -573,7 +573,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_802_3_MULTICAST_LIST: - DBG("%s: OID_802_3_MULTICAST_LIST\n", __FUNCTION__); + DBG("%s: OID_802_3_MULTICAST_LIST\n", __func__); /* Multicast base address only */ *outbuf = __constant_cpu_to_le32 (0xE0000000); retval = 0; @@ -581,21 +581,21 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_802_3_MAXIMUM_LIST_SIZE: - DBG("%s: OID_802_3_MAXIMUM_LIST_SIZE\n", __FUNCTION__); + DBG("%s: OID_802_3_MAXIMUM_LIST_SIZE\n", __func__); /* Multicast base address only */ *outbuf = __constant_cpu_to_le32 (1); retval = 0; break; case OID_802_3_MAC_OPTIONS: - DBG("%s: OID_802_3_MAC_OPTIONS\n", __FUNCTION__); + DBG("%s: OID_802_3_MAC_OPTIONS\n", __func__); break; /* ieee802.3 statistics OIDs (table 4-4) */ /* mandatory */ case OID_802_3_RCV_ERROR_ALIGNMENT: - DBG("%s: OID_802_3_RCV_ERROR_ALIGNMENT\n", __FUNCTION__); + DBG("%s: OID_802_3_RCV_ERROR_ALIGNMENT\n", __func__); if (rndis_per_dev_params [configNr].stats) { *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr] .stats->rx_frame_errors); @@ -605,51 +605,51 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_802_3_XMIT_ONE_COLLISION: - DBG("%s: OID_802_3_XMIT_ONE_COLLISION\n", __FUNCTION__); + DBG("%s: OID_802_3_XMIT_ONE_COLLISION\n", __func__); *outbuf = __constant_cpu_to_le32 (0); retval = 0; break; /* mandatory */ case OID_802_3_XMIT_MORE_COLLISIONS: - DBG("%s: OID_802_3_XMIT_MORE_COLLISIONS\n", __FUNCTION__); + DBG("%s: OID_802_3_XMIT_MORE_COLLISIONS\n", __func__); *outbuf = __constant_cpu_to_le32 (0); retval = 0; break; #ifdef RNDIS_OPTIONAL_STATS case OID_802_3_XMIT_DEFERRED: - DBG("%s: OID_802_3_XMIT_DEFERRED\n", __FUNCTION__); + DBG("%s: OID_802_3_XMIT_DEFERRED\n", __func__); /* TODO */ break; case OID_802_3_XMIT_MAX_COLLISIONS: - DBG("%s: OID_802_3_XMIT_MAX_COLLISIONS\n", __FUNCTION__); + DBG("%s: OID_802_3_XMIT_MAX_COLLISIONS\n", __func__); /* TODO */ break; case OID_802_3_RCV_OVERRUN: - DBG("%s: OID_802_3_RCV_OVERRUN\n", __FUNCTION__); + DBG("%s: OID_802_3_RCV_OVERRUN\n", __func__); /* TODO */ break; case OID_802_3_XMIT_UNDERRUN: - DBG("%s: OID_802_3_XMIT_UNDERRUN\n", __FUNCTION__); + DBG("%s: OID_802_3_XMIT_UNDERRUN\n", __func__); /* TODO */ break; case OID_802_3_XMIT_HEARTBEAT_FAILURE: - DBG("%s: OID_802_3_XMIT_HEARTBEAT_FAILURE\n", __FUNCTION__); + DBG("%s: OID_802_3_XMIT_HEARTBEAT_FAILURE\n", __func__); /* TODO */ break; case OID_802_3_XMIT_TIMES_CRS_LOST: - DBG("%s: OID_802_3_XMIT_TIMES_CRS_LOST\n", __FUNCTION__); + DBG("%s: OID_802_3_XMIT_TIMES_CRS_LOST\n", __func__); /* TODO */ break; case OID_802_3_XMIT_LATE_COLLISIONS: - DBG("%s: OID_802_3_XMIT_LATE_COLLISIONS\n", __FUNCTION__); + DBG("%s: OID_802_3_XMIT_LATE_COLLISIONS\n", __func__); /* TODO */ break; #endif /* RNDIS_OPTIONAL_STATS */ @@ -657,7 +657,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, #ifdef RNDIS_PM /* power management OIDs (table 4-5) */ case OID_PNP_CAPABILITIES: - DBG("%s: OID_PNP_CAPABILITIES\n", __FUNCTION__); + DBG("%s: OID_PNP_CAPABILITIES\n", __func__); /* for now, no wakeup capabilities */ length = sizeof (struct NDIS_PNP_CAPABILITIES); @@ -665,7 +665,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, retval = 0; break; case OID_PNP_QUERY_POWER: - DBG("%s: OID_PNP_QUERY_POWER D%d\n", __FUNCTION__, + DBG("%s: OID_PNP_QUERY_POWER D%d\n", __func__, le32_to_cpu(get_unaligned((__le32 *)buf)) - 1); /* only suspend is a real power state, and * it can't be entered by OID_PNP_SET_POWER... @@ -677,7 +677,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, default: pr_warning("%s: query unknown OID 0x%08X\n", - __FUNCTION__, OID); + __func__, OID); } if (retval < 0) length = 0; @@ -729,7 +729,7 @@ static int gen_ndis_set_resp (u8 configNr, u32 OID, u8 *buf, u32 buf_len, *params->filter = (u16) le32_to_cpu(get_unaligned( (__le32 *)buf)); DBG("%s: OID_GEN_CURRENT_PACKET_FILTER %08x\n", - __FUNCTION__, *params->filter); + __func__, *params->filter); /* this call has a significant side effect: it's * what makes the packet flow start and stop, like @@ -753,7 +753,7 @@ update_linkstate: case OID_802_3_MULTICAST_LIST: /* I think we can ignore this */ - DBG("%s: OID_802_3_MULTICAST_LIST\n", __FUNCTION__); + DBG("%s: OID_802_3_MULTICAST_LIST\n", __func__); retval = 0; break; #if 0 @@ -762,7 +762,7 @@ update_linkstate: struct rndis_config_parameter *param; param = (struct rndis_config_parameter *) buf; DBG("%s: OID_GEN_RNDIS_CONFIG_PARAMETER '%*s'\n", - __FUNCTION__, + __func__, min(cpu_to_le32(param->ParameterNameLength),80), buf + param->ParameterNameOffset); retval = 0; @@ -778,7 +778,7 @@ update_linkstate: * FIXME ... then things go batty; Windows wedges itself. */ i = le32_to_cpu(get_unaligned((__le32 *)buf)); - DBG("%s: OID_PNP_SET_POWER D%d\n", __FUNCTION__, i - 1); + DBG("%s: OID_PNP_SET_POWER D%d\n", __func__, i - 1); switch (i) { case NdisDeviceStateD0: *params->filter = params->saved_filter; @@ -802,7 +802,7 @@ update_linkstate: default: pr_warning("%s: set unknown OID 0x%08X, size %d\n", - __FUNCTION__, OID, buf_len); + __func__, OID, buf_len); } return retval; @@ -855,7 +855,7 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf) rndis_query_cmplt_type *resp; rndis_resp_t *r; - // DBG("%s: OID = %08X\n", __FUNCTION__, cpu_to_le32(buf->OID)); + // DBG("%s: OID = %08X\n", __func__, cpu_to_le32(buf->OID)); if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP; /* @@ -908,9 +908,9 @@ static int rndis_set_response (int configNr, rndis_set_msg_type *buf) BufOffset = le32_to_cpu (buf->InformationBufferOffset); #ifdef VERBOSE - DBG("%s: Length: %d\n", __FUNCTION__, BufLength); - DBG("%s: Offset: %d\n", __FUNCTION__, BufOffset); - DBG("%s: InfoBuffer: ", __FUNCTION__); + DBG("%s: Length: %d\n", __func__, BufLength); + DBG("%s: Offset: %d\n", __func__, BufOffset); + DBG("%s: InfoBuffer: ", __func__); for (i = 0; i < BufLength; i++) { DBG("%02x ", *(((u8 *) buf) + i + 8 + BufOffset)); @@ -1080,14 +1080,14 @@ int rndis_msg_parser (u8 configNr, u8 *buf) switch (MsgType) { case REMOTE_NDIS_INITIALIZE_MSG: DBG("%s: REMOTE_NDIS_INITIALIZE_MSG\n", - __FUNCTION__ ); + __func__ ); params->state = RNDIS_INITIALIZED; return rndis_init_response (configNr, (rndis_init_msg_type *) buf); case REMOTE_NDIS_HALT_MSG: DBG("%s: REMOTE_NDIS_HALT_MSG\n", - __FUNCTION__ ); + __func__ ); params->state = RNDIS_UNINITIALIZED; if (params->dev) { netif_carrier_off (params->dev); @@ -1105,7 +1105,7 @@ int rndis_msg_parser (u8 configNr, u8 *buf) case REMOTE_NDIS_RESET_MSG: DBG("%s: REMOTE_NDIS_RESET_MSG\n", - __FUNCTION__ ); + __func__ ); return rndis_reset_response (configNr, (rndis_reset_msg_type *) buf); @@ -1113,7 +1113,7 @@ int rndis_msg_parser (u8 configNr, u8 *buf) /* For USB: host does this every 5 seconds */ if (rndis_debug > 1) DBG("%s: REMOTE_NDIS_KEEPALIVE_MSG\n", - __FUNCTION__ ); + __func__ ); return rndis_keepalive_response (configNr, (rndis_keepalive_msg_type *) buf); @@ -1124,7 +1124,7 @@ int rndis_msg_parser (u8 configNr, u8 *buf) * suspending itself. */ pr_warning("%s: unknown RNDIS message 0x%08X len %d\n", - __FUNCTION__ , MsgType, MsgLength); + __func__ , MsgType, MsgLength); { unsigned i; for (i = 0; i < MsgLength; i += 16) { @@ -1159,7 +1159,7 @@ int rndis_register (int (* rndis_control_ack) (struct net_device *)) if (!rndis_per_dev_params [i].used) { rndis_per_dev_params [i].used = 1; rndis_per_dev_params [i].ack = rndis_control_ack; - DBG("%s: configNr = %d\n", __FUNCTION__, i); + DBG("%s: configNr = %d\n", __func__, i); return i; } } @@ -1170,7 +1170,7 @@ int rndis_register (int (* rndis_control_ack) (struct net_device *)) void rndis_deregister (int configNr) { - DBG("%s: \n", __FUNCTION__ ); + DBG("%s: \n", __func__ ); if (configNr >= RNDIS_MAX_CONFIGS) return; rndis_per_dev_params [configNr].used = 0; @@ -1182,7 +1182,7 @@ int rndis_set_param_dev (u8 configNr, struct net_device *dev, struct net_device_stats *stats, u16 *cdc_filter) { - DBG("%s:\n", __FUNCTION__ ); + DBG("%s:\n", __func__ ); if (!dev || !stats) return -1; if (configNr >= RNDIS_MAX_CONFIGS) return -1; @@ -1195,7 +1195,7 @@ int rndis_set_param_dev (u8 configNr, struct net_device *dev, int rndis_set_param_vendor (u8 configNr, u32 vendorID, const char *vendorDescr) { - DBG("%s:\n", __FUNCTION__ ); + DBG("%s:\n", __func__ ); if (!vendorDescr) return -1; if (configNr >= RNDIS_MAX_CONFIGS) return -1; @@ -1207,7 +1207,7 @@ int rndis_set_param_vendor (u8 configNr, u32 vendorID, const char *vendorDescr) int rndis_set_param_medium (u8 configNr, u32 medium, u32 speed) { - DBG("%s: %u %u\n", __FUNCTION__, medium, speed); + DBG("%s: %u %u\n", __func__, medium, speed); if (configNr >= RNDIS_MAX_CONFIGS) return -1; rndis_per_dev_params [configNr].medium = medium; @@ -1415,7 +1415,7 @@ int __init rndis_init (void) if (!(rndis_connect_state [i] = create_proc_entry (name, 0660, NULL))) { - DBG("%s :remove entries", __FUNCTION__); + DBG("%s :remove entries", __func__); while (i) { sprintf (name, NAME_TEMPLATE, --i); remove_proc_entry (name, NULL); diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 315c7c14aaa8..5ae689139dd0 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -251,7 +251,7 @@ __acquires(ehci->lock) #ifdef EHCI_URB_TRACE ehci_dbg (ehci, "%s %s urb %p ep%d%s status %d len %d/%d\n", - __FUNCTION__, urb->dev->devpath, urb, + __func__, urb->dev->devpath, urb, usb_pipeendpoint (urb->pipe), usb_pipein (urb->pipe) ? "in" : "out", status, @@ -974,7 +974,7 @@ submit_async ( #ifdef EHCI_URB_TRACE ehci_dbg (ehci, "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n", - __FUNCTION__, urb->dev->devpath, urb, + __func__, urb->dev->devpath, urb, epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out", urb->transfer_buffer_length, qtd, urb->ep->hcpriv); diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index e3cfe0a03552..be575e46eac3 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1677,7 +1677,7 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, #ifdef EHCI_URB_TRACE ehci_dbg (ehci, "%s %s urb %p ep%d%s len %d, %d pkts %d uframes [%p]\n", - __FUNCTION__, urb->dev->devpath, urb, + __func__, urb->dev->devpath, urb, usb_pipeendpoint (urb->pipe), usb_pipein (urb->pipe) ? "in" : "out", urb->transfer_buffer_length, diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 0ee694f043cc..ae6e70edd745 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -106,7 +106,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base) pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup); if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) { dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n", - __FUNCTION__, legsup); + __func__, legsup); goto reset_needed; } @@ -114,14 +114,14 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base) if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) || !(cmd & UHCI_USBCMD_EGSM)) { dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n", - __FUNCTION__, cmd); + __func__, cmd); goto reset_needed; } intr = inw(base + UHCI_USBINTR); if (intr & (~UHCI_USBINTR_RESUME)) { dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n", - __FUNCTION__, intr); + __func__, intr); goto reset_needed; } return 0; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index df256d61e2c6..274276cf8621 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1335,7 +1335,7 @@ static int sl811h_bus_suspend(struct usb_hcd *hcd) { // SOFs off - DBG("%s\n", __FUNCTION__); + DBG("%s\n", __func__); return 0; } @@ -1343,7 +1343,7 @@ static int sl811h_bus_resume(struct usb_hcd *hcd) { // SOFs on - DBG("%s\n", __FUNCTION__); + DBG("%s\n", __func__); return 0; } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index f65d5a858733..d3e0d8aa3980 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -335,7 +335,7 @@ __releases(uhci->lock) __acquires(uhci->lock) { dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev, - "%s%s\n", __FUNCTION__, + "%s%s\n", __func__, uhci->rh_state == UHCI_RH_AUTO_STOPPED ? " (auto-start)" : ""); @@ -735,7 +735,7 @@ static int uhci_pci_suspend(struct usb_hcd *hcd, pm_message_t message) struct uhci_hcd *uhci = hcd_to_uhci(hcd); int rc = 0; - dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__); + dev_dbg(uhci_dev(uhci), "%s\n", __func__); spin_lock_irq(&uhci->lock); if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead) @@ -771,7 +771,7 @@ static int uhci_pci_resume(struct usb_hcd *hcd) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); - dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__); + dev_dbg(uhci_dev(uhci), "%s\n", __func__); /* Since we aren't in D3 any more, it's safe to set this flag * even if the controller was dead. diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 60379b17bbc1..db645936eedd 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1171,7 +1171,7 @@ static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb) /* Some debugging code */ dev_dbg(&urb->dev->dev, "%s: failed with status %x\n", - __FUNCTION__, status); + __func__, status); if (debug > 1 && errbuf) { /* Print the chain for debugging */ diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 5a2c44e4c1f7..965f6eaea6a0 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -147,10 +147,10 @@ static void adu_abort_transfers(struct adu_device *dev) { unsigned long flags; - dbg(2," %s : enter", __FUNCTION__); + dbg(2," %s : enter", __func__); if (dev->udev == NULL) { - dbg(1," %s : udev is null", __FUNCTION__); + dbg(1," %s : udev is null", __func__); goto exit; } @@ -172,12 +172,12 @@ static void adu_abort_transfers(struct adu_device *dev) spin_unlock_irqrestore(&dev->buflock, flags); exit: - dbg(2," %s : leave", __FUNCTION__); + dbg(2," %s : leave", __func__); } static void adu_delete(struct adu_device *dev) { - dbg(2, "%s enter", __FUNCTION__); + dbg(2, "%s enter", __func__); /* free data structures */ usb_free_urb(dev->interrupt_in_urb); @@ -188,7 +188,7 @@ static void adu_delete(struct adu_device *dev) kfree(dev->interrupt_out_buffer); kfree(dev); - dbg(2, "%s : leave", __FUNCTION__); + dbg(2, "%s : leave", __func__); } static void adu_interrupt_in_callback(struct urb *urb) @@ -196,8 +196,8 @@ static void adu_interrupt_in_callback(struct urb *urb) struct adu_device *dev = urb->context; int status = urb->status; - dbg(4," %s : enter, status %d", __FUNCTION__, status); - adu_debug_data(5, __FUNCTION__, urb->actual_length, + dbg(4," %s : enter, status %d", __func__, status); + adu_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer); spin_lock(&dev->buflock); @@ -206,7 +206,7 @@ static void adu_interrupt_in_callback(struct urb *urb) if ((status != -ENOENT) && (status != -ECONNRESET) && (status != -ESHUTDOWN)) { dbg(1," %s : nonzero status received: %d", - __FUNCTION__, status); + __func__, status); } goto exit; } @@ -220,10 +220,10 @@ static void adu_interrupt_in_callback(struct urb *urb) dev->interrupt_in_buffer, urb->actual_length); dev->read_buffer_length += urb->actual_length; - dbg(2," %s reading %d ", __FUNCTION__, + dbg(2," %s reading %d ", __func__, urb->actual_length); } else { - dbg(1," %s : read_buffer overflow", __FUNCTION__); + dbg(1," %s : read_buffer overflow", __func__); } } @@ -232,9 +232,9 @@ exit: spin_unlock(&dev->buflock); /* always wake up so we recover from errors */ wake_up_interruptible(&dev->read_wait); - adu_debug_data(5, __FUNCTION__, urb->actual_length, + adu_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer); - dbg(4," %s : leave, status %d", __FUNCTION__, status); + dbg(4," %s : leave, status %d", __func__, status); } static void adu_interrupt_out_callback(struct urb *urb) @@ -242,14 +242,14 @@ static void adu_interrupt_out_callback(struct urb *urb) struct adu_device *dev = urb->context; int status = urb->status; - dbg(4," %s : enter, status %d", __FUNCTION__, status); - adu_debug_data(5,__FUNCTION__, urb->actual_length, urb->transfer_buffer); + dbg(4," %s : enter, status %d", __func__, status); + adu_debug_data(5,__func__, urb->actual_length, urb->transfer_buffer); if (status != 0) { if ((status != -ENOENT) && (status != -ECONNRESET)) { dbg(1, " %s :nonzero status received: %d", - __FUNCTION__, status); + __func__, status); } goto exit; } @@ -260,9 +260,9 @@ static void adu_interrupt_out_callback(struct urb *urb) spin_unlock(&dev->buflock); exit: - adu_debug_data(5, __FUNCTION__, urb->actual_length, + adu_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer); - dbg(4," %s : leave, status %d", __FUNCTION__, status); + dbg(4," %s : leave, status %d", __func__, status); } static int adu_open(struct inode *inode, struct file *file) @@ -272,19 +272,19 @@ static int adu_open(struct inode *inode, struct file *file) int subminor; int retval; - dbg(2,"%s : enter", __FUNCTION__); + dbg(2,"%s : enter", __func__); subminor = iminor(inode); if ((retval = mutex_lock_interruptible(&adutux_mutex))) { - dbg(2, "%s : mutex lock failed", __FUNCTION__); + dbg(2, "%s : mutex lock failed", __func__); goto exit_no_lock; } interface = usb_find_interface(&adu_driver, subminor); if (!interface) { err("%s - error, can't find device for minor %d", - __FUNCTION__, subminor); + __func__, subminor); retval = -ENODEV; goto exit_no_device; } @@ -302,7 +302,7 @@ static int adu_open(struct inode *inode, struct file *file) } ++dev->open_count; - dbg(2,"%s : open count %d", __FUNCTION__, dev->open_count); + dbg(2,"%s : open count %d", __func__, dev->open_count); /* save device in the file's private structure */ file->private_data = dev; @@ -332,23 +332,23 @@ static int adu_open(struct inode *inode, struct file *file) exit_no_device: mutex_unlock(&adutux_mutex); exit_no_lock: - dbg(2,"%s : leave, return value %d ", __FUNCTION__, retval); + dbg(2,"%s : leave, return value %d ", __func__, retval); return retval; } static void adu_release_internal(struct adu_device *dev) { - dbg(2," %s : enter", __FUNCTION__); + dbg(2," %s : enter", __func__); /* decrement our usage count for the device */ --dev->open_count; - dbg(2," %s : open count %d", __FUNCTION__, dev->open_count); + dbg(2," %s : open count %d", __func__, dev->open_count); if (dev->open_count <= 0) { adu_abort_transfers(dev); dev->open_count = 0; } - dbg(2," %s : leave", __FUNCTION__); + dbg(2," %s : leave", __func__); } static int adu_release(struct inode *inode, struct file *file) @@ -356,17 +356,17 @@ static int adu_release(struct inode *inode, struct file *file) struct adu_device *dev; int retval = 0; - dbg(2," %s : enter", __FUNCTION__); + dbg(2," %s : enter", __func__); if (file == NULL) { - dbg(1," %s : file is NULL", __FUNCTION__); + dbg(1," %s : file is NULL", __func__); retval = -ENODEV; goto exit; } dev = file->private_data; if (dev == NULL) { - dbg(1," %s : object is NULL", __FUNCTION__); + dbg(1," %s : object is NULL", __func__); retval = -ENODEV; goto exit; } @@ -374,7 +374,7 @@ static int adu_release(struct inode *inode, struct file *file) mutex_lock(&adutux_mutex); /* not interruptible */ if (dev->open_count <= 0) { - dbg(1," %s : device not opened", __FUNCTION__); + dbg(1," %s : device not opened", __func__); retval = -ENODEV; goto exit; } @@ -388,7 +388,7 @@ static int adu_release(struct inode *inode, struct file *file) exit: mutex_unlock(&adutux_mutex); - dbg(2," %s : leave, return value %d", __FUNCTION__, retval); + dbg(2," %s : leave, return value %d", __func__, retval); return retval; } @@ -405,10 +405,10 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, unsigned long flags; DECLARE_WAITQUEUE(wait, current); - dbg(2," %s : enter, count = %Zd, file=%p", __FUNCTION__, count, file); + dbg(2," %s : enter, count = %Zd, file=%p", __func__, count, file); dev = file->private_data; - dbg(2," %s : dev=%p", __FUNCTION__, dev); + dbg(2," %s : dev=%p", __func__, dev); if (mutex_lock_interruptible(&dev->mtx)) return -ERESTARTSYS; @@ -422,16 +422,16 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, /* verify that some data was requested */ if (count == 0) { - dbg(1," %s : read request of 0 bytes", __FUNCTION__); + dbg(1," %s : read request of 0 bytes", __func__); goto exit; } timeout = COMMAND_TIMEOUT; - dbg(2," %s : about to start looping", __FUNCTION__); + dbg(2," %s : about to start looping", __func__); while (bytes_to_read) { int data_in_secondary = dev->secondary_tail - dev->secondary_head; dbg(2," %s : while, data_in_secondary=%d, status=%d", - __FUNCTION__, data_in_secondary, + __func__, data_in_secondary, dev->interrupt_in_urb->status); if (data_in_secondary) { @@ -456,7 +456,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, /* we secure access to the primary */ char *tmp; dbg(2," %s : swap, read_buffer_length = %d", - __FUNCTION__, dev->read_buffer_length); + __func__, dev->read_buffer_length); tmp = dev->read_buffer_secondary; dev->read_buffer_secondary = dev->read_buffer_primary; dev->read_buffer_primary = tmp; @@ -471,10 +471,10 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, if (!dev->read_urb_finished) { /* somebody is doing IO */ spin_unlock_irqrestore(&dev->buflock, flags); - dbg(2," %s : submitted already", __FUNCTION__); + dbg(2," %s : submitted already", __func__); } else { /* we must initiate input */ - dbg(2," %s : initiate input", __FUNCTION__); + dbg(2," %s : initiate input", __func__); dev->read_urb_finished = 0; spin_unlock_irqrestore(&dev->buflock, flags); @@ -492,7 +492,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, if (retval == -ENOMEM) { retval = bytes_read ? bytes_read : -ENOMEM; } - dbg(2," %s : submit failed", __FUNCTION__); + dbg(2," %s : submit failed", __func__); goto exit; } } @@ -511,13 +511,13 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, remove_wait_queue(&dev->read_wait, &wait); if (timeout <= 0) { - dbg(2," %s : timeout", __FUNCTION__); + dbg(2," %s : timeout", __func__); retval = bytes_read ? bytes_read : -ETIMEDOUT; goto exit; } if (signal_pending(current)) { - dbg(2," %s : signal pending", __FUNCTION__); + dbg(2," %s : signal pending", __func__); retval = bytes_read ? bytes_read : -EINTR; goto exit; } @@ -550,7 +550,7 @@ exit: /* unlock the device */ mutex_unlock(&dev->mtx); - dbg(2," %s : leave, return value %d", __FUNCTION__, retval); + dbg(2," %s : leave, return value %d", __func__, retval); return retval; } @@ -565,7 +565,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, unsigned long flags; int retval; - dbg(2," %s : enter, count = %Zd", __FUNCTION__, count); + dbg(2," %s : enter, count = %Zd", __func__, count); dev = file->private_data; @@ -582,7 +582,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, /* verify that we actually have some data to write */ if (count == 0) { - dbg(1," %s : write request of 0 bytes", __FUNCTION__); + dbg(1," %s : write request of 0 bytes", __func__); goto exit; } @@ -595,13 +595,13 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, mutex_unlock(&dev->mtx); if (signal_pending(current)) { - dbg(1," %s : interrupted", __FUNCTION__); + dbg(1," %s : interrupted", __func__); set_current_state(TASK_RUNNING); retval = -EINTR; goto exit_onqueue; } if (schedule_timeout(COMMAND_TIMEOUT) == 0) { - dbg(1, "%s - command timed out.", __FUNCTION__); + dbg(1, "%s - command timed out.", __func__); retval = -ETIMEDOUT; goto exit_onqueue; } @@ -612,18 +612,18 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, goto exit_nolock; } - dbg(4," %s : in progress, count = %Zd", __FUNCTION__, count); + dbg(4," %s : in progress, count = %Zd", __func__, count); } else { spin_unlock_irqrestore(&dev->buflock, flags); set_current_state(TASK_RUNNING); remove_wait_queue(&dev->write_wait, &waita); - dbg(4," %s : sending, count = %Zd", __FUNCTION__, count); + dbg(4," %s : sending, count = %Zd", __func__, count); /* write the data into interrupt_out_buffer from userspace */ buffer_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize); bytes_to_write = count > buffer_size ? buffer_size : count; dbg(4," %s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd", - __FUNCTION__, buffer_size, count, bytes_to_write); + __func__, buffer_size, count, bytes_to_write); if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write) != 0) { retval = -EFAULT; @@ -661,7 +661,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, exit: mutex_unlock(&dev->mtx); exit_nolock: - dbg(2," %s : leave, return value %d", __FUNCTION__, retval); + dbg(2," %s : leave, return value %d", __func__, retval); return retval; exit_onqueue: @@ -706,7 +706,7 @@ static int adu_probe(struct usb_interface *interface, int out_end_size; int i; - dbg(2," %s : enter", __FUNCTION__); + dbg(2," %s : enter", __func__); if (udev == NULL) { dev_err(&interface->dev, "udev is NULL.\n"); @@ -807,7 +807,7 @@ static int adu_probe(struct usb_interface *interface, dev_err(&interface->dev, "Could not retrieve serial number\n"); goto error; } - dbg(2," %s : serial_number=%s", __FUNCTION__, dev->serial_number); + dbg(2," %s : serial_number=%s", __func__, dev->serial_number); /* we can register the device now, as it is ready */ usb_set_intfdata(interface, dev); @@ -828,7 +828,7 @@ static int adu_probe(struct usb_interface *interface, udev->descriptor.idProduct, dev->serial_number, (dev->minor - ADU_MINOR_BASE)); exit: - dbg(2," %s : leave, return value %p (dev)", __FUNCTION__, dev); + dbg(2," %s : leave, return value %p (dev)", __func__, dev); return retval; @@ -847,7 +847,7 @@ static void adu_disconnect(struct usb_interface *interface) struct adu_device *dev; int minor; - dbg(2," %s : enter", __FUNCTION__); + dbg(2," %s : enter", __func__); dev = usb_get_intfdata(interface); @@ -861,7 +861,7 @@ static void adu_disconnect(struct usb_interface *interface) usb_set_intfdata(interface, NULL); /* if the device is not opened, then we clean up right now */ - dbg(2," %s : open count %d", __FUNCTION__, dev->open_count); + dbg(2," %s : open count %d", __func__, dev->open_count); if (!dev->open_count) adu_delete(dev); @@ -870,7 +870,7 @@ static void adu_disconnect(struct usb_interface *interface) dev_info(&interface->dev, "ADU device adutux%d now disconnected\n", (minor - ADU_MINOR_BASE)); - dbg(2," %s : leave", __FUNCTION__); + dbg(2," %s : leave", __func__); } /* usb specific object needed to register this driver with the usb subsystem */ @@ -885,7 +885,7 @@ static int __init adu_init(void) { int result; - dbg(2," %s : enter", __FUNCTION__); + dbg(2," %s : enter", __func__); /* register this driver with the USB subsystem */ result = usb_register(&adu_driver); @@ -899,17 +899,17 @@ static int __init adu_init(void) info("adutux is an experimental driver. Use at your own risk"); exit: - dbg(2," %s : leave, return value %d", __FUNCTION__, result); + dbg(2," %s : leave, return value %d", __func__, result); return result; } static void __exit adu_exit(void) { - dbg(2," %s : enter", __FUNCTION__); + dbg(2," %s : enter", __func__); /* deregister this driver with the USB subsystem */ usb_deregister(&adu_driver); - dbg(2," %s : leave", __FUNCTION__); + dbg(2," %s : leave", __func__); } module_init(adu_init); diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index a5e4c3545c72..a076c24a312a 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -103,11 +103,11 @@ static void appledisplay_complete(struct urb *urb) case -ESHUTDOWN: /* This urb is terminated, clean up */ dbg("%s - urb shuttingdown with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dbg("%s - nonzero urb status received: %d", - __FUNCTION__, status); + __func__, status); goto exit; } @@ -131,7 +131,7 @@ exit: retval = usb_submit_urb(pdata->urb, GFP_ATOMIC); if (retval) { err("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); + __func__, retval); } } diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index 81d051ca2291..309c743a09d5 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -983,7 +983,7 @@ static void auerswald_int_complete (struct urb * urb) pauerbuf_t bp = NULL; pauerswald_t cp = (pauerswald_t) urb->context; - dbg ("%s called", __FUNCTION__); + dbg ("%s called", __func__); switch (status) { case 0: @@ -993,10 +993,10 @@ static void auerswald_int_complete (struct urb * urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, status); + dbg("%s - urb shutting down with status: %d", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, status); + dbg("%s - nonzero urb status received: %d", __func__, status); goto exit; } @@ -1081,7 +1081,7 @@ exit: ret = usb_submit_urb (urb, GFP_ATOMIC); if (ret) err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, ret); + __func__, ret); } /* int memory deallocation diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index 4a09b87bdd28..4b9dc81b8453 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -70,8 +70,8 @@ static int emi26_writememory (struct usb_device *dev, int address, unsigned char static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit) { int response; - info("%s - %d", __FUNCTION__, reset_bit); - /* printk(KERN_DEBUG "%s - %d", __FUNCTION__, reset_bit); */ + info("%s - %d", __func__, reset_bit); + /* printk(KERN_DEBUG "%s - %d", __func__, reset_bit); */ response = emi26_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0); if (response < 0) { err("emi26: set_reset (%d) failed", reset_bit); @@ -91,7 +91,7 @@ static int emi26_load_firmware (struct usb_device *dev) buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); if (!buf) { - err( "%s - error loading firmware: error = %d", __FUNCTION__, -ENOMEM); + err( "%s - error loading firmware: error = %d", __func__, -ENOMEM); err = -ENOMEM; goto wraperr; } @@ -99,7 +99,7 @@ static int emi26_load_firmware (struct usb_device *dev) /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); if (err < 0) { - err( "%s - error loading firmware: error = %d", __FUNCTION__, err); + err( "%s - error loading firmware: error = %d", __func__, err); goto wraperr; } @@ -107,7 +107,7 @@ static int emi26_load_firmware (struct usb_device *dev) for (i=0; g_Loader[i].type == 0; i++) { err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } } @@ -115,7 +115,7 @@ static int emi26_load_firmware (struct usb_device *dev) /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } msleep(250); /* let device settle */ @@ -135,7 +135,7 @@ static int emi26_load_firmware (struct usb_device *dev) } err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } } while (i > 0); @@ -143,7 +143,7 @@ static int emi26_load_firmware (struct usb_device *dev) /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } @@ -151,7 +151,7 @@ static int emi26_load_firmware (struct usb_device *dev) for (i=0; g_Loader[i].type == 0; i++) { err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } } @@ -160,7 +160,7 @@ static int emi26_load_firmware (struct usb_device *dev) /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } @@ -169,7 +169,7 @@ static int emi26_load_firmware (struct usb_device *dev) if (!INTERNAL_RAM(g_Firmware[i].address)) { err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_EXTERNAL); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } } @@ -178,7 +178,7 @@ static int emi26_load_firmware (struct usb_device *dev) /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } @@ -186,7 +186,7 @@ static int emi26_load_firmware (struct usb_device *dev) if (INTERNAL_RAM(g_Firmware[i].address)) { err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_INTERNAL); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } } @@ -195,7 +195,7 @@ static int emi26_load_firmware (struct usb_device *dev) /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } msleep(250); /* let device settle */ @@ -221,7 +221,7 @@ static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *i { struct usb_device *dev = interface_to_usbdev(intf); - info("%s start", __FUNCTION__); + info("%s start", __func__); emi26_load_firmware(dev); diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index d1362415922c..1a2b79ac5e10 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -78,7 +78,7 @@ static int emi62_writememory (struct usb_device *dev, int address, unsigned char static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit) { int response; - info("%s - %d", __FUNCTION__, reset_bit); + info("%s - %d", __func__, reset_bit); response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0); if (response < 0) { @@ -100,7 +100,7 @@ static int emi62_load_firmware (struct usb_device *dev) dev_dbg(&dev->dev, "load_firmware\n"); buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); if (!buf) { - err( "%s - error loading firmware: error = %d", __FUNCTION__, -ENOMEM); + err( "%s - error loading firmware: error = %d", __func__, -ENOMEM); err = -ENOMEM; goto wraperr; } @@ -108,7 +108,7 @@ static int emi62_load_firmware (struct usb_device *dev) /* Assert reset (stop the CPU in the EMI) */ err = emi62_set_reset(dev,1); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } @@ -116,7 +116,7 @@ static int emi62_load_firmware (struct usb_device *dev) for (i=0; g_emi62_loader[i].type == 0; i++) { err = emi62_writememory(dev, g_emi62_loader[i].address, g_emi62_loader[i].data, g_emi62_loader[i].length, ANCHOR_LOAD_INTERNAL); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } } @@ -124,7 +124,7 @@ static int emi62_load_firmware (struct usb_device *dev) /* De-assert reset (let the CPU run) */ err = emi62_set_reset(dev,0); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } msleep(250); /* let device settle */ @@ -144,7 +144,7 @@ static int emi62_load_firmware (struct usb_device *dev) } err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } } while (i > 0); @@ -152,7 +152,7 @@ static int emi62_load_firmware (struct usb_device *dev) /* Assert reset (stop the CPU in the EMI) */ err = emi62_set_reset(dev,1); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } @@ -160,7 +160,7 @@ static int emi62_load_firmware (struct usb_device *dev) for (i=0; g_emi62_loader[i].type == 0; i++) { err = emi62_writememory(dev, g_emi62_loader[i].address, g_emi62_loader[i].data, g_emi62_loader[i].length, ANCHOR_LOAD_INTERNAL); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } } @@ -168,7 +168,7 @@ static int emi62_load_firmware (struct usb_device *dev) /* De-assert reset (let the CPU run) */ err = emi62_set_reset(dev,0); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } msleep(250); /* let device settle */ @@ -181,7 +181,7 @@ static int emi62_load_firmware (struct usb_device *dev) if (!INTERNAL_RAM(g_HexSpdifFw62[i].address)) { err = emi62_writememory(dev, g_HexSpdifFw62[i].address, g_HexSpdifFw62[i].data, g_HexSpdifFw62[i].length, ANCHOR_LOAD_EXTERNAL); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } } @@ -191,7 +191,7 @@ static int emi62_load_firmware (struct usb_device *dev) if (!INTERNAL_RAM(g_HexMidiFw62[i].address)) { err = emi62_writememory(dev, g_HexMidiFw62[i].address, g_HexMidiFw62[i].data, g_HexMidiFw62[i].length, ANCHOR_LOAD_EXTERNAL); if (err < 0) { - err("%s - error loading firmware: error = %d\n", __FUNCTION__, err); + err("%s - error loading firmware: error = %d\n", __func__, err); goto wraperr; return err; } @@ -201,7 +201,7 @@ static int emi62_load_firmware (struct usb_device *dev) /* Assert reset (stop the CPU in the EMI) */ err = emi62_set_reset(dev,1); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } @@ -211,7 +211,7 @@ static int emi62_load_firmware (struct usb_device *dev) if (INTERNAL_RAM(g_HexSpdifFw62[i].address)) { err = emi62_writememory(dev, g_HexSpdifFw62[i].address, g_HexSpdifFw62[i].data, g_HexSpdifFw62[i].length, ANCHOR_LOAD_INTERNAL); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } } @@ -221,7 +221,7 @@ static int emi62_load_firmware (struct usb_device *dev) if (INTERNAL_RAM(g_HexMidiFw62[i].address)) { err = emi62_writememory(dev, g_HexMidiFw62[i].address, g_HexMidiFw62[i].data, g_HexMidiFw62[i].length, ANCHOR_LOAD_INTERNAL); if (err < 0) { - err("%s - error loading firmware: error = %d\n", __FUNCTION__, err); + err("%s - error loading firmware: error = %d\n", __func__, err); goto wraperr; } } @@ -231,7 +231,7 @@ static int emi62_load_firmware (struct usb_device *dev) /* De-assert reset (let the CPU run) */ err = emi62_set_reset(dev,0); if (err < 0) { - err("%s - error loading firmware: error = %d", __FUNCTION__, err); + err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } msleep(250); /* let device settle */ @@ -260,7 +260,7 @@ static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *i struct usb_device *dev = interface_to_usbdev(intf); dev_dbg(&intf->dev, "emi62_probe\n"); - info("%s start", __FUNCTION__); + info("%s start", __func__); emi62_load_firmware(dev); diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 801070502cc1..0a2549bc0540 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -218,7 +218,7 @@ exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d\n", - __FUNCTION__, retval); + __func__, retval); } @@ -453,7 +453,7 @@ static ssize_t iowarrior_write(struct file *file, default: /* what do we have here ? An unsupported Product-ID ? */ dev_err(&dev->interface->dev, "%s - not supported for product=0x%x\n", - __FUNCTION__, dev->product_id); + __func__, dev->product_id); retval = -EFAULT; goto exit; break; @@ -604,7 +604,7 @@ static int iowarrior_open(struct inode *inode, struct file *file) interface = usb_find_interface(&iowarrior_driver, subminor); if (!interface) { - err("%s - error, can't find device for minor %d", __FUNCTION__, + err("%s - error, can't find device for minor %d", __func__, subminor); return -ENODEV; } diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index c730d20eec66..11580e81e2c6 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -231,7 +231,7 @@ static void ld_usb_interrupt_in_callback(struct urb *urb) goto exit; } else { dbg_info(&dev->intf->dev, "%s: nonzero status received: %d\n", - __FUNCTION__, status); + __func__, status); spin_lock(&dev->rbsl); goto resubmit; /* maybe we can recover */ } @@ -247,7 +247,7 @@ static void ld_usb_interrupt_in_callback(struct urb *urb) memcpy(actual_buffer+1, dev->interrupt_in_buffer, urb->actual_length); dev->ring_head = next_ring_head; dbg_info(&dev->intf->dev, "%s: received %d bytes\n", - __FUNCTION__, urb->actual_length); + __func__, urb->actual_length); } else { dev_warn(&dev->intf->dev, "Ring buffer overflow, %d bytes dropped\n", @@ -286,7 +286,7 @@ static void ld_usb_interrupt_out_callback(struct urb *urb) status == -ESHUTDOWN)) dbg_info(&dev->intf->dev, "%s - nonzero write interrupt status received: %d\n", - __FUNCTION__, status); + __func__, status); dev->interrupt_out_busy = 0; wake_up_interruptible(&dev->write_wait); @@ -309,7 +309,7 @@ static int ld_usb_open(struct inode *inode, struct file *file) if (!interface) { err("%s - error, can't find device for minor %d\n", - __FUNCTION__, subminor); + __func__, subminor); return -ENODEV; } @@ -556,7 +556,7 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer, bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size); if (bytes_to_write < count) dev_warn(&dev->intf->dev, "Write buffer overflow, %zd bytes dropped\n",count-bytes_to_write); - dbg_info(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n", __FUNCTION__, count, bytes_to_write); + dbg_info(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n", __func__, count, bytes_to_write); if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) { retval = -EFAULT; diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 6664043f4645..fae5b1730ba2 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -31,7 +31,7 @@ * - imported into lejos project * - changed wake_up to wake_up_interruptible * - changed to use lego0 rather than tower0 - * - changed dbg() to use __func__ rather than deprecated __FUNCTION__ + * - changed dbg() to use __func__ rather than deprecated __func__ * 2003-01-12 - 0.53 david (david@csse.uwa.edu.au) * - changed read and write to write everything or * timeout (from a patch by Chris Riesen and Brett Thaeler driver) @@ -49,7 +49,7 @@ * - added poll * - forbid seeking * - added nonblocking I/O - * - changed back __func__ to __FUNCTION__ + * - changed back __func__ to __func__ * - read and log tower firmware version * - reset tower on probe, avoids failure of first write * 2004-03-09 - 0.7 Juergen Stuber @@ -309,7 +309,7 @@ static inline void lego_usb_tower_debug_data (int level, const char *function, i */ static inline void tower_delete (struct lego_usb_tower *dev) { - dbg(2, "%s: enter", __FUNCTION__); + dbg(2, "%s: enter", __func__); tower_abort_transfers (dev); @@ -321,7 +321,7 @@ static inline void tower_delete (struct lego_usb_tower *dev) kfree (dev->interrupt_out_buffer); kfree (dev); - dbg(2, "%s: leave", __FUNCTION__); + dbg(2, "%s: leave", __func__); } @@ -337,7 +337,7 @@ static int tower_open (struct inode *inode, struct file *file) struct tower_reset_reply reset_reply; int result; - dbg(2, "%s: enter", __FUNCTION__); + dbg(2, "%s: enter", __func__); nonseekable_open(inode, file); subminor = iminor(inode); @@ -346,7 +346,7 @@ static int tower_open (struct inode *inode, struct file *file) if (!interface) { err ("%s - error, can't find device for minor %d", - __FUNCTION__, subminor); + __func__, subminor); retval = -ENODEV; goto exit; } @@ -424,7 +424,7 @@ unlock_exit: mutex_unlock(&dev->lock); exit: - dbg(2, "%s: leave, return value %d ", __FUNCTION__, retval); + dbg(2, "%s: leave, return value %d ", __func__, retval); return retval; } @@ -437,12 +437,12 @@ static int tower_release (struct inode *inode, struct file *file) struct lego_usb_tower *dev; int retval = 0; - dbg(2, "%s: enter", __FUNCTION__); + dbg(2, "%s: enter", __func__); dev = (struct lego_usb_tower *)file->private_data; if (dev == NULL) { - dbg(1, "%s: object is NULL", __FUNCTION__); + dbg(1, "%s: object is NULL", __func__); retval = -ENODEV; goto exit_nolock; } @@ -454,7 +454,7 @@ static int tower_release (struct inode *inode, struct file *file) } if (dev->open_count != 1) { - dbg(1, "%s: device not opened exactly once", __FUNCTION__); + dbg(1, "%s: device not opened exactly once", __func__); retval = -ENODEV; goto unlock_exit; } @@ -480,7 +480,7 @@ unlock_exit: exit: mutex_unlock(&open_disc_mutex); exit_nolock: - dbg(2, "%s: leave, return value %d", __FUNCTION__, retval); + dbg(2, "%s: leave, return value %d", __func__, retval); return retval; } @@ -491,10 +491,10 @@ exit_nolock: */ static void tower_abort_transfers (struct lego_usb_tower *dev) { - dbg(2, "%s: enter", __FUNCTION__); + dbg(2, "%s: enter", __func__); if (dev == NULL) { - dbg(1, "%s: dev is null", __FUNCTION__); + dbg(1, "%s: dev is null", __func__); goto exit; } @@ -509,7 +509,7 @@ static void tower_abort_transfers (struct lego_usb_tower *dev) usb_kill_urb(dev->interrupt_out_urb); exit: - dbg(2, "%s: leave", __FUNCTION__); + dbg(2, "%s: leave", __func__); } @@ -542,7 +542,7 @@ static unsigned int tower_poll (struct file *file, poll_table *wait) struct lego_usb_tower *dev; unsigned int mask = 0; - dbg(2, "%s: enter", __FUNCTION__); + dbg(2, "%s: enter", __func__); dev = file->private_data; @@ -557,7 +557,7 @@ static unsigned int tower_poll (struct file *file, poll_table *wait) mask |= POLLOUT | POLLWRNORM; } - dbg(2, "%s: leave, mask = %d", __FUNCTION__, mask); + dbg(2, "%s: leave, mask = %d", __func__, mask); return mask; } @@ -583,7 +583,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, int retval = 0; unsigned long timeout = 0; - dbg(2, "%s: enter, count = %Zd", __FUNCTION__, count); + dbg(2, "%s: enter, count = %Zd", __func__, count); dev = (struct lego_usb_tower *)file->private_data; @@ -602,7 +602,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, /* verify that we actually have some data to read */ if (count == 0) { - dbg(1, "%s: read request of 0 bytes", __FUNCTION__); + dbg(1, "%s: read request of 0 bytes", __func__); goto unlock_exit; } @@ -658,7 +658,7 @@ unlock_exit: mutex_unlock(&dev->lock); exit: - dbg(2, "%s: leave, return value %d", __FUNCTION__, retval); + dbg(2, "%s: leave, return value %d", __func__, retval); return retval; } @@ -672,7 +672,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t size_t bytes_to_write; int retval = 0; - dbg(2, "%s: enter, count = %Zd", __FUNCTION__, count); + dbg(2, "%s: enter, count = %Zd", __func__, count); dev = (struct lego_usb_tower *)file->private_data; @@ -691,7 +691,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t /* verify that we actually have some data to write */ if (count == 0) { - dbg(1, "%s: write request of 0 bytes", __FUNCTION__); + dbg(1, "%s: write request of 0 bytes", __func__); goto unlock_exit; } @@ -709,7 +709,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t /* write the data into interrupt_out_buffer from userspace */ bytes_to_write = min_t(int, count, write_buffer_size); - dbg(4, "%s: count = %Zd, bytes_to_write = %Zd", __FUNCTION__, count, bytes_to_write); + dbg(4, "%s: count = %Zd, bytes_to_write = %Zd", __func__, count, bytes_to_write); if (copy_from_user (dev->interrupt_out_buffer, buffer, bytes_to_write)) { retval = -EFAULT; @@ -742,7 +742,7 @@ unlock_exit: mutex_unlock(&dev->lock); exit: - dbg(2, "%s: leave, return value %d", __FUNCTION__, retval); + dbg(2, "%s: leave, return value %d", __func__, retval); return retval; } @@ -757,9 +757,9 @@ static void tower_interrupt_in_callback (struct urb *urb) int status = urb->status; int retval; - dbg(4, "%s: enter, status %d", __FUNCTION__, status); + dbg(4, "%s: enter, status %d", __func__, status); - lego_usb_tower_debug_data(5, __FUNCTION__, urb->actual_length, urb->transfer_buffer); + lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer); if (status) { if (status == -ENOENT || @@ -767,7 +767,7 @@ static void tower_interrupt_in_callback (struct urb *urb) status == -ESHUTDOWN) { goto exit; } else { - dbg(1, "%s: nonzero status received: %d", __FUNCTION__, status); + dbg(1, "%s: nonzero status received: %d", __func__, status); goto resubmit; /* maybe we can recover */ } } @@ -780,9 +780,9 @@ static void tower_interrupt_in_callback (struct urb *urb) urb->actual_length); dev->read_buffer_length += urb->actual_length; dev->read_last_arrival = jiffies; - dbg(3, "%s: received %d bytes", __FUNCTION__, urb->actual_length); + dbg(3, "%s: received %d bytes", __func__, urb->actual_length); } else { - printk(KERN_WARNING "%s: read_buffer overflow, %d bytes dropped", __FUNCTION__, urb->actual_length); + printk(KERN_WARNING "%s: read_buffer overflow, %d bytes dropped", __func__, urb->actual_length); } spin_unlock (&dev->read_buffer_lock); } @@ -792,7 +792,7 @@ resubmit: if (dev->interrupt_in_running && dev->udev) { retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC); if (retval) { - err("%s: usb_submit_urb failed (%d)", __FUNCTION__, retval); + err("%s: usb_submit_urb failed (%d)", __func__, retval); } } @@ -800,8 +800,8 @@ exit: dev->interrupt_in_done = 1; wake_up_interruptible (&dev->read_wait); - lego_usb_tower_debug_data(5, __FUNCTION__, urb->actual_length, urb->transfer_buffer); - dbg(4, "%s: leave, status %d", __FUNCTION__, status); + lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer); + dbg(4, "%s: leave, status %d", __func__, status); } @@ -813,22 +813,22 @@ static void tower_interrupt_out_callback (struct urb *urb) struct lego_usb_tower *dev = (struct lego_usb_tower *)urb->context; int status = urb->status; - dbg(4, "%s: enter, status %d", __FUNCTION__, status); - lego_usb_tower_debug_data(5, __FUNCTION__, urb->actual_length, urb->transfer_buffer); + dbg(4, "%s: enter, status %d", __func__, status); + lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer); /* sync/async unlink faults aren't errors */ if (status && !(status == -ENOENT || status == -ECONNRESET || status == -ESHUTDOWN)) { dbg(1, "%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); } dev->interrupt_out_busy = 0; wake_up_interruptible(&dev->write_wait); - lego_usb_tower_debug_data(5, __FUNCTION__, urb->actual_length, urb->transfer_buffer); - dbg(4, "%s: leave, status %d", __FUNCTION__, status); + lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer); + dbg(4, "%s: leave, status %d", __func__, status); } @@ -849,7 +849,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device int retval = -ENOMEM; int result; - dbg(2, "%s: enter", __FUNCTION__); + dbg(2, "%s: enter", __func__); if (udev == NULL) { info ("udev is NULL."); @@ -978,7 +978,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device exit: - dbg(2, "%s: leave, return value 0x%.8lx (dev)", __FUNCTION__, (long) dev); + dbg(2, "%s: leave, return value 0x%.8lx (dev)", __func__, (long) dev); return retval; @@ -998,7 +998,7 @@ static void tower_disconnect (struct usb_interface *interface) struct lego_usb_tower *dev; int minor; - dbg(2, "%s: enter", __FUNCTION__); + dbg(2, "%s: enter", __func__); dev = usb_get_intfdata (interface); mutex_lock(&open_disc_mutex); @@ -1023,7 +1023,7 @@ static void tower_disconnect (struct usb_interface *interface) info("LEGO USB Tower #%d now disconnected", (minor - LEGO_USB_TOWER_MINOR_BASE)); - dbg(2, "%s: leave", __FUNCTION__); + dbg(2, "%s: leave", __func__); } @@ -1036,7 +1036,7 @@ static int __init lego_usb_tower_init(void) int result; int retval = 0; - dbg(2, "%s: enter", __FUNCTION__); + dbg(2, "%s: enter", __func__); /* register this driver with the USB subsystem */ result = usb_register(&tower_driver); @@ -1049,7 +1049,7 @@ static int __init lego_usb_tower_init(void) info(DRIVER_DESC " " DRIVER_VERSION); exit: - dbg(2, "%s: leave, return value %d", __FUNCTION__, retval); + dbg(2, "%s: leave, return value %d", __func__, retval); return retval; } @@ -1060,12 +1060,12 @@ exit: */ static void __exit lego_usb_tower_exit(void) { - dbg(2, "%s: enter", __FUNCTION__); + dbg(2, "%s: enter", __func__); /* deregister this driver with the USB subsystem */ usb_deregister (&tower_driver); - dbg(2, "%s: leave", __FUNCTION__); + dbg(2, "%s: leave", __func__); } module_init (lego_usb_tower_init); diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c index aa9bcceabe74..24230c638b8e 100644 --- a/drivers/usb/misc/phidgetkit.c +++ b/drivers/usb/misc/phidgetkit.c @@ -113,7 +113,7 @@ static int set_outputs(struct interfacekit *kit) buffer = kzalloc(4, GFP_KERNEL); if (!buffer) { - dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&kit->udev->dev, "%s - out of memory\n", __func__); return -ENOMEM; } buffer[0] = (u8)kit->outputs; @@ -146,7 +146,7 @@ static int change_string(struct interfacekit *kit, const char *display, unsigned buffer = kmalloc(8, GFP_KERNEL); form_buffer = kmalloc(30, GFP_KERNEL); if ((!buffer) || (!form_buffer)) { - dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&kit->udev->dev, "%s - out of memory\n", __func__); goto exit; } @@ -216,7 +216,7 @@ static ssize_t set_backlight(struct device *dev, struct device_attribute *attr, buffer = kzalloc(8, GFP_KERNEL); if (!buffer) { - dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&kit->udev->dev, "%s - out of memory\n", __func__); goto exit; } diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c index 2ad09b1f4848..f0113c17cc5a 100644 --- a/drivers/usb/misc/phidgetmotorcontrol.c +++ b/drivers/usb/misc/phidgetmotorcontrol.c @@ -61,7 +61,7 @@ static int set_motor(struct motorcontrol *mc, int motor) buffer = kzalloc(8, GFP_KERNEL); if (!buffer) { - dev_err(&mc->intf->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&mc->intf->dev, "%s - out of memory\n", __func__); return -ENOMEM; } diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c index 0d9de2f73930..7d590c09434a 100644 --- a/drivers/usb/misc/phidgetservo.c +++ b/drivers/usb/misc/phidgetservo.c @@ -89,7 +89,7 @@ change_position_v30(struct phidget_servo *servo, int servo_no, int degrees, buffer = kmalloc(6, GFP_KERNEL); if (!buffer) { dev_err(&servo->udev->dev, "%s - out of memory\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -162,7 +162,7 @@ change_position_v20(struct phidget_servo *servo, int servo_no, int degrees, buffer = kmalloc(2, GFP_KERNEL); if (!buffer) { dev_err(&servo->udev->dev, "%s - out of memory\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -259,7 +259,7 @@ servo_probe(struct usb_interface *interface, const struct usb_device_id *id) dev = kzalloc(sizeof (struct phidget_servo), GFP_KERNEL); if (dev == NULL) { - dev_err(&interface->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&interface->dev, "%s - out of memory\n", __func__); rc = -ENOMEM; goto out; } diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 20777d01db62..ada7bf898fe9 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -78,7 +78,7 @@ static int lcd_open(struct inode *inode, struct file *file) interface = usb_find_interface(&lcd_driver, subminor); if (!interface) { err ("USBLCD: %s - error, can't find device for minor %d", - __FUNCTION__, subminor); + __func__, subminor); return -ENODEV; } @@ -193,7 +193,7 @@ static void lcd_write_bulk_callback(struct urb *urb) status == -ECONNRESET || status == -ESHUTDOWN)) { dbg("USBLCD: %s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); } /* free up our allocated buffer */ @@ -248,7 +248,7 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz /* send the data out the bulk port */ retval = usb_submit_urb(urb, GFP_KERNEL); if (retval) { - err("USBLCD: %s - failed submitting write urb, error %d", __FUNCTION__, retval); + err("USBLCD: %s - failed submitting write urb, error %d", __func__, retval); goto error_unanchor; } diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 2c4fd4d6df95..678fac86c467 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1136,7 +1136,7 @@ static int verify_not_halted (int ep, struct urb *urb) dbg ("ep %02x bogus status: %04x != 0", ep, status); return -EINVAL; } - retval = simple_io (urb, 1, 0, 0, __FUNCTION__); + retval = simple_io (urb, 1, 0, 0, __func__); if (retval != 0) return -EINVAL; return 0; @@ -1158,7 +1158,7 @@ static int verify_halted (int ep, struct urb *urb) dbg ("ep %02x bogus status: %04x != 1", ep, status); return -EINVAL; } - retval = simple_io (urb, 1, 0, -EPIPE, __FUNCTION__); + retval = simple_io (urb, 1, 0, -EPIPE, __func__); if (retval != -EPIPE) return -EINVAL; retval = simple_io (urb, 1, 0, -EPIPE, "verify_still_halted"); diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 1cd29cd6bd00..a238817762ad 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -210,7 +210,7 @@ static void aircable_send(struct usb_serial_port *port) struct aircable_private *priv = usb_get_serial_port_data(port); unsigned char* buf; u16 *dbuf; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (port->write_urb_busy) return; @@ -220,7 +220,7 @@ static void aircable_send(struct usb_serial_port *port) buf = kzalloc(count + HCI_HEADER_LENGTH, GFP_ATOMIC); if (!buf) { - err("%s- kzalloc(%d) failed.", __FUNCTION__, + err("%s- kzalloc(%d) failed.", __func__, count + HCI_HEADER_LENGTH); return; } @@ -236,7 +236,7 @@ static void aircable_send(struct usb_serial_port *port) kfree(buf); port->write_urb_busy = 1; - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + usb_serial_debug_data(debug, &port->dev, __func__, count + HCI_HEADER_LENGTH, port->write_urb->transfer_buffer); port->write_urb->transfer_buffer_length = count + HCI_HEADER_LENGTH; @@ -246,7 +246,7 @@ static void aircable_send(struct usb_serial_port *port) if (result) { dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", - __FUNCTION__, result); + __func__, result); port->write_urb_busy = 0; } @@ -275,7 +275,7 @@ static void aircable_read(struct work_struct *work) if (!tty) { schedule_work(&priv->rx_work); - err("%s - No tty available", __FUNCTION__); + err("%s - No tty available", __func__); return ; } @@ -286,7 +286,7 @@ static void aircable_read(struct work_struct *work) tty_prepare_flip_string(tty, &data, count); if (!data){ - err("%s- kzalloc(%d) failed.", __FUNCTION__, count); + err("%s- kzalloc(%d) failed.", __func__, count); return; } @@ -332,7 +332,7 @@ static int aircable_attach (struct usb_serial *serial) priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL); if (!priv){ - err("%s- kmalloc(%Zd) failed.", __FUNCTION__, + err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct aircable_private)); return -ENOMEM; } @@ -366,7 +366,7 @@ static void aircable_shutdown(struct usb_serial *serial) struct usb_serial_port *port = serial->port[0]; struct aircable_private *priv = usb_get_serial_port_data(port); - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (priv) { serial_buf_free(priv->tx_buf); @@ -388,12 +388,12 @@ static int aircable_write(struct usb_serial_port *port, struct aircable_private *priv = usb_get_serial_port_data(port); int temp; - dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count); + dbg("%s - port %d, %d bytes", __func__, port->number, count); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, source); + usb_serial_debug_data(debug, &port->dev, __func__, count, source); if (!count){ - dbg("%s - write request of 0 bytes", __FUNCTION__); + dbg("%s - write request of 0 bytes", __func__); return count; } @@ -414,7 +414,7 @@ static void aircable_write_bulk_callback(struct urb *urb) int status = urb->status; int result; - dbg("%s - urb status: %d", __FUNCTION__ , status); + dbg("%s - urb status: %d", __func__ , status); /* This has been taken from cypress_m8.c cypress_write_int_callback */ switch (status) { @@ -426,21 +426,21 @@ static void aircable_write_bulk_callback(struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); port->write_urb_busy = 0; return; default: /* error in the urb, so we have to resubmit it */ - dbg("%s - Overflow in write", __FUNCTION__); + dbg("%s - Overflow in write", __func__); dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); port->write_urb->transfer_buffer_length = 1; port->write_urb->dev = port->serial->dev; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", - __FUNCTION__, result); + __func__, result); else return; } @@ -460,17 +460,17 @@ static void aircable_read_bulk_callback(struct urb *urb) unsigned char *temp; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { - dbg("%s - urb status = %d", __FUNCTION__, status); + dbg("%s - urb status = %d", __func__, status); if (!port->open_count) { - dbg("%s - port is closed, exiting.", __FUNCTION__); + dbg("%s - port is closed, exiting.", __func__); return; } if (status == -EPROTO) { dbg("%s - caught -EPROTO, resubmitting the urb", - __FUNCTION__); + __func__); usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), @@ -482,14 +482,14 @@ static void aircable_read_bulk_callback(struct urb *urb) if (result) dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", - __FUNCTION__, result); + __func__, result); return; } - dbg("%s - unable to handle the error, exiting.", __FUNCTION__); + dbg("%s - unable to handle the error, exiting.", __func__); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length,urb->transfer_buffer); tty = port->tty; @@ -538,7 +538,7 @@ static void aircable_read_bulk_callback(struct urb *urb) if (result) dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", - __FUNCTION__, result); + __func__, result); } return; @@ -550,7 +550,7 @@ static void aircable_throttle(struct usb_serial_port *port) struct aircable_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->rx_lock, flags); priv->rx_flags |= THROTTLED; @@ -564,7 +564,7 @@ static void aircable_unthrottle(struct usb_serial_port *port) int actually_throttled; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->rx_lock, flags); actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index d5bcb3774034..725b6b94c274 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -53,7 +53,7 @@ static int airprime_send_setup(struct usb_serial_port *port) struct usb_serial *serial = port->serial; struct airprime_private *priv; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (port->number != 0) return 0; @@ -83,14 +83,14 @@ static void airprime_read_bulk_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); tty = port->tty; if (tty && urb->actual_length) { @@ -101,7 +101,7 @@ static void airprime_read_bulk_callback(struct urb *urb) result = usb_submit_urb (urb, GFP_ATOMIC); if (result) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", - __FUNCTION__, result); + __func__, result); return; } @@ -112,14 +112,14 @@ static void airprime_write_bulk_callback(struct urb *urb) int status = urb->status; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree (urb->transfer_buffer); if (status) dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); spin_lock_irqsave(&priv->lock, flags); --priv->outstanding_urbs; spin_unlock_irqrestore(&priv->lock, flags); @@ -136,7 +136,7 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp) int i; int result = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* initialize our private data structure if it isn't already created */ if (!priv) { @@ -157,7 +157,7 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp) buffer = kmalloc(buffer_size, GFP_KERNEL); if (!buffer) { dev_err(&port->dev, "%s - out of memory.\n", - __FUNCTION__); + __func__); result = -ENOMEM; goto errout; } @@ -165,7 +165,7 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp) if (!urb) { kfree(buffer); dev_err(&port->dev, "%s - no more urbs?\n", - __FUNCTION__); + __func__); result = -ENOMEM; goto errout; } @@ -180,7 +180,7 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp) kfree(buffer); dev_err(&port->dev, "%s - failed submitting read urb %d for port %d, error %d\n", - __FUNCTION__, i, port->number, result); + __func__, i, port->number, result); goto errout; } /* remember this urb so we can kill it when the port is closed */ @@ -212,7 +212,7 @@ static void airprime_close(struct usb_serial_port *port, struct file * filp) struct airprime_private *priv = usb_get_serial_port_data(port); int i; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); priv->rts_state = 0; priv->dtr_state = 0; @@ -242,12 +242,12 @@ static int airprime_write(struct usb_serial_port *port, unsigned char *buffer; unsigned long flags; int status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > NUM_WRITE_URBS) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit\n", __FUNCTION__); + dbg("%s - write limit hit\n", __func__); return 0; } spin_unlock_irqrestore(&priv->lock, flags); @@ -264,7 +264,7 @@ static int airprime_write(struct usb_serial_port *port, } memcpy (buffer, buf, count); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); usb_fill_bulk_urb(urb, serial->dev, usb_sndbulkpipe(serial->dev, @@ -277,7 +277,7 @@ static int airprime_write(struct usb_serial_port *port, if (status) { dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", - __FUNCTION__, status); + __func__, status); count = status; kfree (buffer); } else { @@ -328,7 +328,7 @@ static int __init airprime_init(void) static void __exit airprime_exit(void) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); usb_deregister(&airprime_driver); usb_serial_deregister(&airprime_device); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index aa7a6838a3d4..9d708b22e955 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -173,7 +173,7 @@ static void ark3116_set_termios(struct usb_serial_port *port, config = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { @@ -323,7 +323,7 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp) char *buf; int result = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); buf = kmalloc(1, GFP_KERNEL); if (!buf) { @@ -395,7 +395,7 @@ static int ark3116_ioctl(struct usb_serial_port *port, struct file *file, return -EFAULT; return 0; default: - dbg("%s cmd 0x%04x not supported", __FUNCTION__, cmd); + dbg("%s cmd 0x%04x not supported", __func__, cmd); break; } diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index b6950648804f..5a2877c22129 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -195,7 +195,7 @@ static void belkin_sa_shutdown (struct usb_serial *serial) struct belkin_sa_private *priv; int i; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); /* stop reads and writes on all ports */ for (i=0; i < serial->num_ports; ++i) { @@ -210,7 +210,7 @@ static int belkin_sa_open (struct usb_serial_port *port, struct file *filp) { int retval = 0; - dbg("%s port %d", __FUNCTION__, port->number); + dbg("%s port %d", __func__, port->number); /*Start reading from the device*/ /* TODO: Look at possibility of submitting multiple URBs to device to @@ -237,7 +237,7 @@ exit: static void belkin_sa_close (struct usb_serial_port *port, struct file *filp) { - dbg("%s port %d", __FUNCTION__, port->number); + dbg("%s port %d", __func__, port->number); /* shutdown our bulk reads and writes */ usb_kill_urb(port->write_urb); @@ -264,15 +264,15 @@ static void belkin_sa_read_int_callback (struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dbg("%s - nonzero urb status received: %d", - __FUNCTION__, status); + __func__, status); goto exit; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); /* Handle known interrupt data */ /* ignore data[0] and data[1] */ @@ -331,7 +331,7 @@ exit: retval = usb_submit_urb (urb, GFP_ATOMIC); if (retval) err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); + __func__, retval); } static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) @@ -478,7 +478,7 @@ static int belkin_sa_tiocmget (struct usb_serial_port *port, struct file *file) unsigned long control_state; unsigned long flags; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); spin_lock_irqsave(&priv->lock, flags); control_state = priv->control_state; @@ -499,7 +499,7 @@ static int belkin_sa_tiocmset (struct usb_serial_port *port, struct file *file, int rts = 0; int dtr = 0; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); spin_lock_irqsave(&priv->lock, flags); control_state = priv->control_state; diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 66ce30c1b75b..201184c3fb87 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -67,7 +67,7 @@ static int usb_console_setup(struct console *co, char *options) struct tty_struct *tty = NULL; struct ktermios *termios = NULL, dummy; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); if (options) { baud = simple_strtoul(options, NULL, 10); @@ -225,10 +225,10 @@ static void usb_console_write(struct console *co, const char *buf, unsigned coun if (count == 0) return; - dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count); + dbg("%s - port %d, %d byte(s)", __func__, port->number, count); if (!port->open_count) { - dbg ("%s - port not opened", __FUNCTION__); + dbg ("%s - port not opened", __func__); return; } @@ -248,7 +248,7 @@ static void usb_console_write(struct console *co, const char *buf, unsigned coun retval = serial->type->write(port, buf, i); else retval = usb_serial_generic_write(port, buf, i); - dbg("%s - return value : %d", __FUNCTION__, retval); + dbg("%s - return value : %d", __func__, retval); if (lf) { /* append CR after LF */ unsigned char cr = 13; @@ -256,7 +256,7 @@ static void usb_console_write(struct console *co, const char *buf, unsigned coun retval = serial->type->write(port, &cr, 1); else retval = usb_serial_generic_write(port, &cr, 1); - dbg("%s - return value : %d", __FUNCTION__, retval); + dbg("%s - return value : %d", __func__, retval); } buf += i; count -= i; diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 2af8d21bb121..dc0ea08ed231 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -193,7 +193,7 @@ static int cp2101_get_config(struct usb_serial_port* port, u8 request, buf = kcalloc(length, sizeof(__le32), GFP_KERNEL); if (!buf) { - dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__); + dev_err(&port->dev, "%s - out of memory.\n", __func__); return -ENOMEM; } @@ -214,7 +214,7 @@ static int cp2101_get_config(struct usb_serial_port* port, u8 request, if (result != size) { dev_err(&port->dev, "%s - Unable to send config request, " "request=0x%x size=%d result=%d\n", - __FUNCTION__, request, size, result); + __func__, request, size, result); return -EPROTO; } @@ -240,7 +240,7 @@ static int cp2101_set_config(struct usb_serial_port* port, u8 request, buf = kmalloc(length * sizeof(__le32), GFP_KERNEL); if (!buf) { dev_err(&port->dev, "%s - out of memory.\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -265,7 +265,7 @@ static int cp2101_set_config(struct usb_serial_port* port, u8 request, if ((size > 2 && result != size) || result < 0) { dev_err(&port->dev, "%s - Unable to send request, " "request=0x%x size=%d result=%d\n", - __FUNCTION__, request, size, result); + __func__, request, size, result); return -EPROTO; } @@ -293,11 +293,11 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) struct usb_serial *serial = port->serial; int result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", - __FUNCTION__); + __func__); return -EPROTO; } @@ -312,7 +312,7 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed resubmitting read urb, " - "error %d\n", __FUNCTION__, result); + "error %d\n", __func__, result); return result; } @@ -329,7 +329,7 @@ static void cp2101_cleanup (struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (serial->dev) { /* shutdown any bulk reads that might be going on */ @@ -342,10 +342,10 @@ static void cp2101_cleanup (struct usb_serial_port *port) static void cp2101_close (struct usb_serial_port *port, struct file * filp) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* shutdown our urbs */ - dbg("%s - shutting down urbs", __FUNCTION__); + dbg("%s - shutting down urbs", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); @@ -367,10 +367,10 @@ static void cp2101_get_termios (struct usb_serial_port *port) int baud; int bits; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->tty || !port->tty->termios) { - dbg("%s - no tty structures", __FUNCTION__); + dbg("%s - no tty structures", __func__); return; } @@ -379,7 +379,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) if (baud) baud = BAUD_RATE_GEN_FREQ / baud; - dbg("%s - baud rate = %d", __FUNCTION__, baud); + dbg("%s - baud rate = %d", __func__, baud); tty_encode_baud_rate(port->tty, baud, baud); cflag = port->tty->termios->c_cflag; @@ -388,24 +388,24 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag &= ~CSIZE; switch(bits & BITS_DATA_MASK) { case BITS_DATA_5: - dbg("%s - data bits = 5", __FUNCTION__); + dbg("%s - data bits = 5", __func__); cflag |= CS5; break; case BITS_DATA_6: - dbg("%s - data bits = 6", __FUNCTION__); + dbg("%s - data bits = 6", __func__); cflag |= CS6; break; case BITS_DATA_7: - dbg("%s - data bits = 7", __FUNCTION__); + dbg("%s - data bits = 7", __func__); cflag |= CS7; break; case BITS_DATA_8: - dbg("%s - data bits = 8", __FUNCTION__); + dbg("%s - data bits = 8", __func__); cflag |= CS8; break; case BITS_DATA_9: dbg("%s - data bits = 9 (not supported, " - "using 8 data bits)", __FUNCTION__); + "using 8 data bits)", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; @@ -413,7 +413,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) break; default: dbg("%s - Unknown number of data bits, " - "using 8", __FUNCTION__); + "using 8", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; @@ -423,35 +423,35 @@ static void cp2101_get_termios (struct usb_serial_port *port) switch(bits & BITS_PARITY_MASK) { case BITS_PARITY_NONE: - dbg("%s - parity = NONE", __FUNCTION__); + dbg("%s - parity = NONE", __func__); cflag &= ~PARENB; break; case BITS_PARITY_ODD: - dbg("%s - parity = ODD", __FUNCTION__); + dbg("%s - parity = ODD", __func__); cflag |= (PARENB|PARODD); break; case BITS_PARITY_EVEN: - dbg("%s - parity = EVEN", __FUNCTION__); + dbg("%s - parity = EVEN", __func__); cflag &= ~PARODD; cflag |= PARENB; break; case BITS_PARITY_MARK: dbg("%s - parity = MARK (not supported, " - "disabling parity)", __FUNCTION__); + "disabling parity)", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, " - "disabling parity)", __FUNCTION__); + "disabling parity)", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; cp2101_set_config(port, CP2101_BITS, &bits, 2); break; default: dbg("%s - Unknown parity mode, " - "disabling parity", __FUNCTION__); + "disabling parity", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; cp2101_set_config(port, CP2101_BITS, &bits, 2); @@ -461,21 +461,21 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag &= ~CSTOPB; switch(bits & BITS_STOP_MASK) { case BITS_STOP_1: - dbg("%s - stop bits = 1", __FUNCTION__); + dbg("%s - stop bits = 1", __func__); break; case BITS_STOP_1_5: dbg("%s - stop bits = 1.5 (not supported, " - "using 1 stop bit)", __FUNCTION__); + "using 1 stop bit)", __func__); bits &= ~BITS_STOP_MASK; cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_STOP_2: - dbg("%s - stop bits = 2", __FUNCTION__); + dbg("%s - stop bits = 2", __func__); cflag |= CSTOPB; break; default: dbg("%s - Unknown number of stop bits, " - "using 1 stop bit", __FUNCTION__); + "using 1 stop bit", __func__); bits &= ~BITS_STOP_MASK; cp2101_set_config(port, CP2101_BITS, &bits, 2); break; @@ -483,10 +483,10 @@ static void cp2101_get_termios (struct usb_serial_port *port) cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); if (modem_ctl[0] & 0x0008) { - dbg("%s - flow control = CRTSCTS", __FUNCTION__); + dbg("%s - flow control = CRTSCTS", __func__); cflag |= CRTSCTS; } else { - dbg("%s - flow control = NONE", __FUNCTION__); + dbg("%s - flow control = NONE", __func__); cflag &= ~CRTSCTS; } @@ -500,10 +500,10 @@ static void cp2101_set_termios (struct usb_serial_port *port, int baud=0, bits; unsigned int modem_ctl[4]; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->tty || !port->tty->termios) { - dbg("%s - no tty structures", __FUNCTION__); + dbg("%s - no tty structures", __func__); return; } port->tty->termios->c_cflag &= ~CMSPAR; @@ -542,7 +542,7 @@ static void cp2101_set_termios (struct usb_serial_port *port, } if (baud) { - dbg("%s - Setting baud rate to %d baud", __FUNCTION__, + dbg("%s - Setting baud rate to %d baud", __func__, baud); if (cp2101_set_config_single(port, CP2101_BAUDRATE, (BAUD_RATE_GEN_FREQ / baud))) { @@ -562,23 +562,23 @@ static void cp2101_set_termios (struct usb_serial_port *port, switch (cflag & CSIZE) { case CS5: bits |= BITS_DATA_5; - dbg("%s - data bits = 5", __FUNCTION__); + dbg("%s - data bits = 5", __func__); break; case CS6: bits |= BITS_DATA_6; - dbg("%s - data bits = 6", __FUNCTION__); + dbg("%s - data bits = 6", __func__); break; case CS7: bits |= BITS_DATA_7; - dbg("%s - data bits = 7", __FUNCTION__); + dbg("%s - data bits = 7", __func__); break; case CS8: bits |= BITS_DATA_8; - dbg("%s - data bits = 8", __FUNCTION__); + dbg("%s - data bits = 8", __func__); break; /*case CS9: bits |= BITS_DATA_9; - dbg("%s - data bits = 9", __FUNCTION__); + dbg("%s - data bits = 9", __func__); break;*/ default: dev_err(&port->dev, "cp2101 driver does not " @@ -598,10 +598,10 @@ static void cp2101_set_termios (struct usb_serial_port *port, if (cflag & PARENB) { if (cflag & PARODD) { bits |= BITS_PARITY_ODD; - dbg("%s - parity = ODD", __FUNCTION__); + dbg("%s - parity = ODD", __func__); } else { bits |= BITS_PARITY_EVEN; - dbg("%s - parity = EVEN", __FUNCTION__); + dbg("%s - parity = EVEN", __func__); } } if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) @@ -614,10 +614,10 @@ static void cp2101_set_termios (struct usb_serial_port *port, bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; - dbg("%s - stop bits = 2", __FUNCTION__); + dbg("%s - stop bits = 2", __func__); } else { bits |= BITS_STOP_1; - dbg("%s - stop bits = 1", __FUNCTION__); + dbg("%s - stop bits = 1", __func__); } if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Number of stop bits requested " @@ -627,23 +627,23 @@ static void cp2101_set_termios (struct usb_serial_port *port, if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", - __FUNCTION__, modem_ctl[0], modem_ctl[1], + __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); if (cflag & CRTSCTS) { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x09; modem_ctl[1] = 0x80; - dbg("%s - flow control = CRTSCTS", __FUNCTION__); + dbg("%s - flow control = CRTSCTS", __func__); } else { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x01; modem_ctl[1] |= 0x40; - dbg("%s - flow control = NONE", __FUNCTION__); + dbg("%s - flow control = NONE", __func__); } dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", - __FUNCTION__, modem_ctl[0], modem_ctl[1], + __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); } @@ -655,7 +655,7 @@ static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file, { int control = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (set & TIOCM_RTS) { control |= CONTROL_RTS; @@ -674,7 +674,7 @@ static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file, control |= CONTROL_WRITE_DTR; } - dbg("%s - control = 0x%.4x", __FUNCTION__, control); + dbg("%s - control = 0x%.4x", __func__, control); return cp2101_set_config(port, CP2101_CONTROL, &control, 2); @@ -684,7 +684,7 @@ static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file) { int control, result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); cp2101_get_config(port, CP2101_CONTROL, &control, 1); @@ -695,7 +695,7 @@ static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file) |((control & CONTROL_RING)? TIOCM_RI : 0) |((control & CONTROL_DCD) ? TIOCM_CD : 0); - dbg("%s - control = 0x%.2x", __FUNCTION__, control); + dbg("%s - control = 0x%.2x", __func__, control); return result; } @@ -704,12 +704,12 @@ static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) { int state; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (break_state == 0) state = BREAK_OFF; else state = BREAK_ON; - dbg("%s - turning break %s", __FUNCTION__, + dbg("%s - turning break %s", __func__, state==BREAK_OFF ? "off" : "on"); cp2101_set_config(port, CP2101_BREAK, &state, 2); } @@ -725,7 +725,7 @@ static void cp2101_shutdown (struct usb_serial *serial) { int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Stop reads and writes on all ports */ for (i=0; i < serial->num_ports; ++i) { diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index cbae876cd678..5348e97b52b5 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -116,7 +116,7 @@ static int cyberjack_startup (struct usb_serial *serial) struct cyberjack_private *priv; int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* allocate the private data structure */ priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL); @@ -139,7 +139,7 @@ static int cyberjack_startup (struct usb_serial *serial) GFP_KERNEL); if (result) err(" usb_submit_urb(read int) failed"); - dbg("%s - usb_submit_urb(int urb)", __FUNCTION__); + dbg("%s - usb_submit_urb(int urb)", __func__); } return( 0 ); @@ -149,7 +149,7 @@ static void cyberjack_shutdown (struct usb_serial *serial) { int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); for (i=0; i < serial->num_ports; ++i) { usb_kill_urb(serial->port[i]->interrupt_in_urb); @@ -165,9 +165,9 @@ static int cyberjack_open (struct usb_serial_port *port, struct file *filp) unsigned long flags; int result = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); - dbg("%s - usb_clear_halt", __FUNCTION__ ); + dbg("%s - usb_clear_halt", __func__ ); usb_clear_halt(port->serial->dev, port->write_urb->pipe); /* force low_latency on so that our tty_push actually forces @@ -188,7 +188,7 @@ static int cyberjack_open (struct usb_serial_port *port, struct file *filp) static void cyberjack_close (struct usb_serial_port *port, struct file *filp) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (port->serial->dev) { /* shutdown any bulk reads that might be going on */ @@ -205,17 +205,17 @@ static int cyberjack_write (struct usb_serial_port *port, const unsigned char *b int result; int wrexpected; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (count == 0) { - dbg("%s - write request of 0 bytes", __FUNCTION__); + dbg("%s - write request of 0 bytes", __func__); return (0); } spin_lock_bh(&port->lock); if (port->write_urb_busy) { spin_unlock_bh(&port->lock); - dbg("%s - already writing", __FUNCTION__); + dbg("%s - already writing", __func__); return 0; } port->write_urb_busy = 1; @@ -234,13 +234,13 @@ static int cyberjack_write (struct usb_serial_port *port, const unsigned char *b /* Copy data */ memcpy (priv->wrbuf+priv->wrfilled, buf, count); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, + usb_serial_debug_data(debug, &port->dev, __func__, count, priv->wrbuf+priv->wrfilled); priv->wrfilled += count; if( priv->wrfilled >= 3 ) { wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; - dbg("%s - expected data: %d", __FUNCTION__, wrexpected); + dbg("%s - expected data: %d", __func__, wrexpected); } else { wrexpected = sizeof(priv->wrbuf); } @@ -249,7 +249,7 @@ static int cyberjack_write (struct usb_serial_port *port, const unsigned char *b /* We have enough data to begin transmission */ int length; - dbg("%s - transmitting data (frame 1)", __FUNCTION__); + dbg("%s - transmitting data (frame 1)", __func__); length = (wrexpected > port->bulk_out_size) ? port->bulk_out_size : wrexpected; memcpy (port->write_urb->transfer_buffer, priv->wrbuf, length ); @@ -267,7 +267,7 @@ static int cyberjack_write (struct usb_serial_port *port, const unsigned char *b /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __FUNCTION__, result); + err("%s - failed submitting write urb, error %d", __func__, result); /* Throw away data. No better idea what to do with it. */ priv->wrfilled=0; priv->wrsent=0; @@ -276,11 +276,11 @@ static int cyberjack_write (struct usb_serial_port *port, const unsigned char *b return 0; } - dbg("%s - priv->wrsent=%d", __FUNCTION__,priv->wrsent); - dbg("%s - priv->wrfilled=%d", __FUNCTION__,priv->wrfilled); + dbg("%s - priv->wrsent=%d", __func__,priv->wrsent); + dbg("%s - priv->wrfilled=%d", __func__,priv->wrfilled); if( priv->wrsent>=priv->wrfilled ) { - dbg("%s - buffer cleaned", __FUNCTION__); + dbg("%s - buffer cleaned", __func__); memset( priv->wrbuf, 0, sizeof(priv->wrbuf) ); priv->wrfilled=0; priv->wrsent=0; @@ -305,13 +305,13 @@ static void cyberjack_read_int_callback( struct urb *urb ) int status = urb->status; int result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* the urb might have been killed. */ if (status) return; - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); /* React only to interrupts signaling a bulk_in transfer */ if( (urb->actual_length==4) && (data[0]==0x01) ) { @@ -333,7 +333,7 @@ static void cyberjack_read_int_callback( struct urb *urb ) /* "+=" is probably more fault tollerant than "=" */ priv->rdtodo += size; - dbg("%s - rdtodo: %d", __FUNCTION__, priv->rdtodo); + dbg("%s - rdtodo: %d", __func__, priv->rdtodo); spin_unlock(&priv->lock); @@ -341,8 +341,8 @@ static void cyberjack_read_int_callback( struct urb *urb ) port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if( result ) - err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); - dbg("%s - usb_submit_urb(read urb)", __FUNCTION__); + err("%s - failed resubmitting read urb, error %d", __func__, result); + dbg("%s - usb_submit_urb(read urb)", __func__); } } @@ -351,7 +351,7 @@ resubmit: result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) err(" usb_submit_urb(read int) failed"); - dbg("%s - usb_submit_urb(int urb)", __FUNCTION__); + dbg("%s - usb_submit_urb(int urb)", __func__); } static void cyberjack_read_bulk_callback (struct urb *urb) @@ -364,18 +364,18 @@ static void cyberjack_read_bulk_callback (struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } tty = port->tty; if (!tty) { - dbg("%s - ignoring since device not open\n", __FUNCTION__); + dbg("%s - ignoring since device not open\n", __func__); return; } if (urb->actual_length) { @@ -394,15 +394,15 @@ static void cyberjack_read_bulk_callback (struct urb *urb) spin_unlock(&priv->lock); - dbg("%s - rdtodo: %d", __FUNCTION__, todo); + dbg("%s - rdtodo: %d", __func__, todo); /* Continue to read if we have still urbs to do. */ if( todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/ ) { port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); - dbg("%s - usb_submit_urb(read urb)", __FUNCTION__); + err("%s - failed resubmitting read urb, error %d", __func__, result); + dbg("%s - usb_submit_urb(read urb)", __func__); } } @@ -412,12 +412,12 @@ static void cyberjack_write_bulk_callback (struct urb *urb) struct cyberjack_private *priv = usb_get_serial_port_data(port); int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); port->write_urb_busy = 0; if (status) { dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } @@ -427,7 +427,7 @@ static void cyberjack_write_bulk_callback (struct urb *urb) if( priv->wrfilled ) { int length, blksize, result; - dbg("%s - transmitting data (frame n)", __FUNCTION__); + dbg("%s - transmitting data (frame n)", __func__); length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ? port->bulk_out_size : (priv->wrfilled - priv->wrsent); @@ -448,20 +448,20 @@ static void cyberjack_write_bulk_callback (struct urb *urb) /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __FUNCTION__, result); + err("%s - failed submitting write urb, error %d", __func__, result); /* Throw away data. No better idea what to do with it. */ priv->wrfilled=0; priv->wrsent=0; goto exit; } - dbg("%s - priv->wrsent=%d", __FUNCTION__,priv->wrsent); - dbg("%s - priv->wrfilled=%d", __FUNCTION__,priv->wrfilled); + dbg("%s - priv->wrsent=%d", __func__,priv->wrsent); + dbg("%s - priv->wrfilled=%d", __func__,priv->wrfilled); blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; if( (priv->wrsent>=priv->wrfilled) || (priv->wrsent>=blksize) ) { - dbg("%s - buffer cleaned", __FUNCTION__); + dbg("%s - buffer cleaned", __func__); memset( priv->wrbuf, 0, sizeof(priv->wrbuf) ); priv->wrfilled=0; priv->wrsent=0; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index d8304eaf34c4..01dfc0afc654 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -330,7 +330,7 @@ static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_ra __u8 feature_buffer[5]; unsigned long flags; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); priv = usb_get_serial_port_data(port); @@ -345,7 +345,7 @@ static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_ra new_baudrate = priv->baud_rate; /* Change of speed ? */ else if (baud_rate != priv->baud_rate) { - dbg("%s - baud rate is changing", __FUNCTION__); + dbg("%s - baud rate is changing", __func__); retval = analyze_baud_rate(port, baud_rate); if (retval >= 0) { new_baudrate = retval; @@ -353,7 +353,7 @@ static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_ra __func__, new_baudrate); } } - dbg("%s - baud rate is being sent as %d", __FUNCTION__, new_baudrate); + dbg("%s - baud rate is being sent as %d", __func__, new_baudrate); memset(feature_buffer, 0, sizeof(feature_buffer)); /* fill the feature_buffer with new configuration */ @@ -367,8 +367,8 @@ static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_ra /* 1 bit gap */ feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */ - dbg("%s - device is being sent this feature report:", __FUNCTION__); - dbg("%s - %02X - %02X - %02X - %02X - %02X", __FUNCTION__, feature_buffer[0], feature_buffer[1], + dbg("%s - device is being sent this feature report:", __func__); + dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__, feature_buffer[0], feature_buffer[1], feature_buffer[2], feature_buffer[3], feature_buffer[4]); do { @@ -386,7 +386,7 @@ static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_ra retval != -ENODEV); if (retval != sizeof(feature_buffer)) { - err("%s - failed sending serial line settings - %d", __FUNCTION__, retval); + err("%s - failed sending serial line settings - %d", __func__, retval); cypress_set_dead(port); } else { spin_lock_irqsave(&priv->lock, flags); @@ -406,7 +406,7 @@ static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_ra to crash the hardware. */ return -ENOTTY; } - dbg("%s - retreiving serial line settings", __FUNCTION__); + dbg("%s - retreiving serial line settings", __func__); /* set initial values in feature buffer */ memset(feature_buffer, 0, sizeof(feature_buffer)); @@ -425,7 +425,7 @@ static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_ra retval != -ENODEV); if (retval != sizeof(feature_buffer)) { - err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval); + err("%s - failed to retrieve serial line settings - %d", __func__, retval); cypress_set_dead(port); return retval; } else { @@ -473,7 +473,7 @@ static int generic_startup (struct usb_serial *serial) struct cypress_private *priv; struct usb_serial_port *port = serial->port[0]; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL); if (!priv) @@ -509,12 +509,12 @@ static int generic_startup (struct usb_serial *serial) priv->write_urb_interval = interval; priv->read_urb_interval = interval; dbg("%s - port %d read & write intervals forced to %d", - __FUNCTION__,port->number,interval); + __func__,port->number,interval); } else { priv->write_urb_interval = port->interrupt_out_urb->interval; priv->read_urb_interval = port->interrupt_in_urb->interval; dbg("%s - port %d intervals: read=%d write=%d", - __FUNCTION__,port->number, + __func__,port->number, priv->read_urb_interval,priv->write_urb_interval); } usb_set_serial_port_data(port, priv); @@ -528,10 +528,10 @@ static int cypress_earthmate_startup (struct usb_serial *serial) struct cypress_private *priv; struct usb_serial_port *port = serial->port[0]; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (generic_startup(serial)) { - dbg("%s - Failed setting up port %d", __FUNCTION__, + dbg("%s - Failed setting up port %d", __func__, port->number); return 1; } @@ -559,10 +559,10 @@ static int cypress_hidcom_startup (struct usb_serial *serial) { struct cypress_private *priv; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (generic_startup(serial)) { - dbg("%s - Failed setting up port %d", __FUNCTION__, + dbg("%s - Failed setting up port %d", __func__, serial->port[0]->number); return 1; } @@ -578,10 +578,10 @@ static int cypress_ca42v2_startup (struct usb_serial *serial) { struct cypress_private *priv; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (generic_startup(serial)) { - dbg("%s - Failed setting up port %d", __FUNCTION__, + dbg("%s - Failed setting up port %d", __func__, serial->port[0]->number); return 1; } @@ -597,7 +597,7 @@ static void cypress_shutdown (struct usb_serial *serial) { struct cypress_private *priv; - dbg ("%s - port %d", __FUNCTION__, serial->port[0]->number); + dbg ("%s - port %d", __func__, serial->port[0]->number); /* all open ports are closed at this point */ @@ -618,7 +618,7 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp) unsigned long flags; int result = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!priv->comm_is_ok) return -EIO; @@ -646,16 +646,16 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp) result = cypress_write(port, NULL, 0); if (result) { - dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __func__, result); return result; } else - dbg("%s - success setting the control lines", __FUNCTION__); + dbg("%s - success setting the control lines", __func__); cypress_set_termios(port, &priv->tmp_termios); /* setup the port and start reading from the device */ if(!port->interrupt_in_urb){ - err("%s - interrupt_in_urb is empty!", __FUNCTION__); + err("%s - interrupt_in_urb is empty!", __func__); return(-1); } @@ -666,7 +666,7 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp) result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result){ - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); cypress_set_dead(port); } @@ -682,7 +682,7 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp) long timeout; wait_queue_t wait; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* wait for data to drain from buffer */ spin_lock_irq(&priv->lock); @@ -720,7 +720,7 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp) timeout = 2*HZ; schedule_timeout_interruptible(timeout); - dbg("%s - stopping urbs", __FUNCTION__); + dbg("%s - stopping urbs", __func__); usb_kill_urb (port->interrupt_in_urb); usb_kill_urb (port->interrupt_out_urb); @@ -749,7 +749,7 @@ static int cypress_write(struct usb_serial_port *port, const unsigned char *buf, struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count); + dbg("%s - port %d, %d bytes", __func__, port->number, count); /* line control commands, which need to be executed immediately, are not put into the buffer for obvious reasons. @@ -782,12 +782,12 @@ static void cypress_send(struct usb_serial_port *port) if (!priv->comm_is_ok) return; - dbg("%s - port %d", __FUNCTION__, port->number); - dbg("%s - interrupt out size is %d", __FUNCTION__, port->interrupt_out_size); + dbg("%s - port %d", __func__, port->number); + dbg("%s - interrupt out size is %d", __func__, port->interrupt_out_size); spin_lock_irqsave(&priv->lock, flags); if (priv->write_urb_in_use) { - dbg("%s - can't write, urb in use", __FUNCTION__); + dbg("%s - can't write, urb in use", __func__); spin_unlock_irqrestore(&priv->lock, flags); return; } @@ -816,7 +816,7 @@ static void cypress_send(struct usb_serial_port *port) if (priv->cmd_ctrl) { priv->cmd_count++; - dbg("%s - line control command being issued", __FUNCTION__); + dbg("%s - line control command being issued", __func__); spin_unlock_irqrestore(&priv->lock, flags); goto send; } else @@ -838,7 +838,7 @@ static void cypress_send(struct usb_serial_port *port) port->interrupt_out_buffer[0] |= count; } - dbg("%s - count is %d", __FUNCTION__, count); + dbg("%s - count is %d", __func__, count); send: spin_lock_irqsave(&priv->lock, flags); @@ -851,7 +851,7 @@ send: actual_size = count + (priv->pkt_fmt == packet_format_1 ? 2 : 1); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size, + usb_serial_debug_data(debug, &port->dev, __func__, port->interrupt_out_size, port->interrupt_out_urb->transfer_buffer); usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev, @@ -860,7 +860,7 @@ send: cypress_write_int_callback, port, priv->write_urb_interval); result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, + dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result); priv->write_urb_in_use = 0; cypress_set_dead(port); @@ -884,13 +884,13 @@ static int cypress_write_room(struct usb_serial_port *port) int room = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); room = cypress_buf_space_avail(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return room; } @@ -902,7 +902,7 @@ static int cypress_tiocmget (struct usb_serial_port *port, struct file *file) unsigned int result = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); control = priv->line_control; @@ -916,7 +916,7 @@ static int cypress_tiocmget (struct usb_serial_port *port, struct file *file) | ((status & UART_RI) ? TIOCM_RI : 0) | ((status & UART_CD) ? TIOCM_CD : 0); - dbg("%s - result = %x", __FUNCTION__, result); + dbg("%s - result = %x", __func__, result); return result; } @@ -928,7 +928,7 @@ static int cypress_tiocmset (struct usb_serial_port *port, struct file *file, struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); if (set & TIOCM_RTS) @@ -950,7 +950,7 @@ static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsi { struct cypress_private *priv = usb_get_serial_port_data(port); - dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); + dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); switch (cmd) { /* This code comes from drivers/char/serial.c and ftdi_sio.c */ @@ -988,7 +988,7 @@ static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsi break; } - dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __FUNCTION__, cmd); + dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd); return -ENOIOCTLCMD; } /* cypress_ioctl */ @@ -1005,7 +1005,7 @@ static void cypress_set_termios (struct usb_serial_port *port, __u8 oldlines; int linechange = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); tty = port->tty; @@ -1076,7 +1076,7 @@ static void cypress_set_termios (struct usb_serial_port *port, break; default: err("%s - CSIZE was set, but not CS5-CS8", - __FUNCTION__); + __func__); data_bits = 3; } } else @@ -1086,14 +1086,14 @@ static void cypress_set_termios (struct usb_serial_port *port, oldlines = priv->line_control; if ((cflag & CBAUD) == B0) { /* drop dtr and rts */ - dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__); + dbg("%s - dropping the lines, baud rate 0bps", __func__); priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); } else priv->line_control = (CONTROL_DTR | CONTROL_RTS); spin_unlock_irqrestore(&priv->lock, flags); dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, " - "%d data_bits (+5)", __FUNCTION__, stop_bits, + "%d data_bits (+5)", __func__, stop_bits, parity_enable, parity_type, data_bits); cypress_serial_control(port, tty_get_baud_rate(tty), data_bits, stop_bits, @@ -1154,13 +1154,13 @@ static int cypress_chars_in_buffer(struct usb_serial_port *port) int chars = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); chars = cypress_buf_data_avail(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - returns %d", __FUNCTION__, chars); + dbg("%s - returns %d", __func__, chars); return chars; } @@ -1170,7 +1170,7 @@ static void cypress_throttle (struct usb_serial_port *port) struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); priv->rx_flags = THROTTLED; @@ -1184,7 +1184,7 @@ static void cypress_unthrottle (struct usb_serial_port *port) int actually_throttled, result; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; @@ -1200,7 +1200,7 @@ static void cypress_unthrottle (struct usb_serial_port *port) result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) { dev_err(&port->dev, "%s - failed submitting read urb, " - "error %d\n", __FUNCTION__, result); + "error %d\n", __func__, result); cypress_set_dead(port); } } @@ -1221,7 +1221,7 @@ static void cypress_read_int_callback(struct urb *urb) int i = 0; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); switch (status) { case 0: /* success */ @@ -1237,14 +1237,14 @@ static void cypress_read_int_callback(struct urb *urb) default: /* something ugly is going on... */ dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n", - __FUNCTION__, status); + __func__, status); cypress_set_dead(port); return; } spin_lock_irqsave(&priv->lock, flags); if (priv->rx_flags & THROTTLED) { - dbg("%s - now throttling", __FUNCTION__); + dbg("%s - now throttling", __func__); priv->rx_flags |= ACTUALLY_THROTTLED; spin_unlock_irqrestore(&priv->lock, flags); return; @@ -1253,7 +1253,7 @@ static void cypress_read_int_callback(struct urb *urb) tty = port->tty; if (!tty) { - dbg("%s - bad tty pointer - exiting", __FUNCTION__); + dbg("%s - bad tty pointer - exiting", __func__); return; } @@ -1285,7 +1285,7 @@ static void cypress_read_int_callback(struct urb *urb) goto continue_read; } - usb_serial_debug_data (debug, &port->dev, __FUNCTION__, + usb_serial_debug_data (debug, &port->dev, __func__, urb->actual_length, data); spin_lock_irqsave(&priv->lock, flags); @@ -1302,7 +1302,7 @@ static void cypress_read_int_callback(struct urb *urb) * though */ if (tty && !(tty->termios->c_cflag & CLOCAL) && !(priv->current_status & UART_CD)) { - dbg("%s - calling hangup", __FUNCTION__); + dbg("%s - calling hangup", __func__); tty_hangup(tty); goto continue_read; } @@ -1315,7 +1315,7 @@ static void cypress_read_int_callback(struct urb *urb) if (priv->current_status & CYP_ERROR) { spin_unlock_irqrestore(&priv->lock, flags); tty_flag = TTY_PARITY; - dbg("%s - Parity Error detected", __FUNCTION__); + dbg("%s - Parity Error detected", __func__); } else spin_unlock_irqrestore(&priv->lock, flags); @@ -1349,7 +1349,7 @@ continue_read: result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) { dev_err(&urb->dev->dev, "%s - failed resubmitting " - "read urb, error %d\n", __FUNCTION__, + "read urb, error %d\n", __func__, result); cypress_set_dead(port); } @@ -1366,7 +1366,7 @@ static void cypress_write_int_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); switch (status) { case 0: @@ -1377,7 +1377,7 @@ static void cypress_write_int_callback(struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); priv->write_urb_in_use = 0; return; case -EPIPE: /* no break needed; clear halt and resubmit */ @@ -1386,19 +1386,19 @@ static void cypress_write_int_callback(struct urb *urb) usb_clear_halt(port->serial->dev, 0x02); /* error in the urb, so we have to resubmit it */ dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); port->interrupt_out_urb->transfer_buffer_length = 1; port->interrupt_out_urb->dev = port->serial->dev; result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); if (!result) return; dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", - __FUNCTION__, result); + __func__, result); cypress_set_dead(port); break; default: dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n", - __FUNCTION__, status); + __func__, status); cypress_set_dead(port); break; } @@ -1603,7 +1603,7 @@ static int __init cypress_init(void) { int retval; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); retval = usb_serial_register(&cypress_earthmate_device); if (retval) @@ -1634,7 +1634,7 @@ failed_em_register: static void __exit cypress_exit (void) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); usb_deregister (&cypress_driver); usb_serial_deregister (&cypress_earthmate_device); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 4e3d5993a8e3..c7cbc02f1a70 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -659,7 +659,7 @@ static int digi_write_oob_command(struct usb_serial_port *port, } spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags); if (ret) - err("%s: usb_submit_urb failed, ret=%d", __FUNCTION__, ret); + err("%s: usb_submit_urb failed, ret=%d", __func__, ret); return ret; } @@ -740,7 +740,7 @@ static int digi_write_inb_command(struct usb_serial_port *port, if (ret) err("%s: usb_submit_urb failed, ret=%d, port=%d", - __FUNCTION__, ret, priv->dp_port_num); + __func__, ret, priv->dp_port_num); return ret; } @@ -804,7 +804,7 @@ static int digi_set_modem_signals(struct usb_serial_port *port, spin_unlock(&port_priv->dp_port_lock); spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags); if (ret) - err("%s: usb_submit_urb failed, ret=%d", __FUNCTION__, ret); + err("%s: usb_submit_urb failed, ret=%d", __func__, ret); return ret; } @@ -897,7 +897,7 @@ static void digi_rx_unthrottle(struct usb_serial_port *port) if (ret) err("%s: usb_submit_urb failed, ret=%d, port=%d", - __FUNCTION__, ret, priv->dp_port_num); + __func__, ret, priv->dp_port_num); } @@ -1107,7 +1107,7 @@ static int digi_tiocmget(struct usb_serial_port *port, struct file *file) unsigned int val; unsigned long flags; - dbg("%s: TOP: port=%d", __FUNCTION__, priv->dp_port_num); + dbg("%s: TOP: port=%d", __func__, priv->dp_port_num); spin_lock_irqsave(&priv->dp_port_lock, flags); val = priv->dp_modem_signals; @@ -1123,7 +1123,7 @@ static int digi_tiocmset(struct usb_serial_port *port, struct file *file, unsigned int val; unsigned long flags; - dbg("%s: TOP: port=%d", __FUNCTION__, priv->dp_port_num); + dbg("%s: TOP: port=%d", __func__, priv->dp_port_num); spin_lock_irqsave(&priv->dp_port_lock, flags); val = (priv->dp_modem_signals & ~clear) | set; @@ -1218,7 +1218,7 @@ static int digi_write(struct usb_serial_port *port, const unsigned char *buf, in spin_unlock_irqrestore(&priv->dp_port_lock, flags); if (ret < 0) err("%s: usb_submit_urb failed, ret=%d, port=%d", - __FUNCTION__, ret, priv->dp_port_num); + __func__, ret, priv->dp_port_num); dbg("digi_write: returning %d", ret); return ret; @@ -1239,13 +1239,13 @@ static void digi_write_bulk_callback(struct urb *urb) /* port and serial sanity check */ if (port == NULL || (priv=usb_get_serial_port_data(port)) == NULL) { err("%s: port or port->private is NULL, status=%d", - __FUNCTION__, status); + __func__, status); return; } serial = port->serial; if (serial == NULL || (serial_priv=usb_get_serial_data(serial)) == NULL) { err("%s: serial or serial->private is NULL, status=%d", - __FUNCTION__, status); + __func__, status); return; } @@ -1286,7 +1286,7 @@ static void digi_write_bulk_callback(struct urb *urb) spin_unlock(&priv->dp_port_lock); if (ret) err("%s: usb_submit_urb failed, ret=%d, port=%d", - __FUNCTION__, ret, priv->dp_port_num); + __func__, ret, priv->dp_port_num); } static int digi_write_room(struct usb_serial_port *port) @@ -1515,7 +1515,7 @@ static int digi_startup_device(struct usb_serial *serial) port->write_urb->dev = port->serial->dev; if ((ret = usb_submit_urb(port->read_urb, GFP_KERNEL)) != 0) { err("%s: usb_submit_urb failed, ret=%d, port=%d", - __FUNCTION__, ret, i); + __func__, ret, i); break; } } @@ -1616,20 +1616,20 @@ static void digi_read_bulk_callback(struct urb *urb) /* port sanity check, do not resubmit if port is not valid */ if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) { err("%s: port or port->private is NULL, status=%d", - __FUNCTION__, status); + __func__, status); return; } if (port->serial == NULL || (serial_priv=usb_get_serial_data(port->serial)) == NULL) { err("%s: serial is bad or serial->private is NULL, status=%d", - __FUNCTION__, status); + __func__, status); return; } /* do not resubmit urb if it has any status error */ if (status) { err("%s: nonzero read bulk status: status=%d, port=%d", - __FUNCTION__, status, priv->dp_port_num); + __func__, status, priv->dp_port_num); return; } @@ -1646,7 +1646,7 @@ static void digi_read_bulk_callback(struct urb *urb) urb->dev = port->serial->dev; if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { err("%s: failed resubmitting urb, ret=%d, port=%d", - __FUNCTION__, ret, priv->dp_port_num); + __func__, ret, priv->dp_port_num); } } @@ -1684,7 +1684,7 @@ static int digi_read_inb_callback(struct urb *urb) if (urb->actual_length != len + 2) { err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, " "port=%d, opcode=%d, len=%d, actual_length=%d, " - "status=%d", __FUNCTION__, status, priv->dp_port_num, + "status=%d", __func__, status, priv->dp_port_num, opcode, len, urb->actual_length, port_status); return -1; } @@ -1733,9 +1733,9 @@ static int digi_read_inb_callback(struct urb *urb) spin_unlock(&priv->dp_port_lock); if (opcode == DIGI_CMD_RECEIVE_DISABLE) - dbg("%s: got RECEIVE_DISABLE", __FUNCTION__); + dbg("%s: got RECEIVE_DISABLE", __func__); else if (opcode != DIGI_CMD_RECEIVE_DATA) - dbg("%s: unknown opcode: %d", __FUNCTION__, opcode); + dbg("%s: unknown opcode: %d", __func__, opcode); return(throttled ? 1 : 0); diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 2cf821771175..5f731d4912f7 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -150,7 +150,7 @@ static int empeg_open (struct usb_serial_port *port, struct file *filp) struct usb_serial *serial = port->serial; int result = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* Force default termio settings */ empeg_set_termios (port, NULL) ; @@ -172,7 +172,7 @@ static int empeg_open (struct usb_serial_port *port, struct file *filp) result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); return result; } @@ -180,7 +180,7 @@ static int empeg_open (struct usb_serial_port *port, struct file *filp) static void empeg_close (struct usb_serial_port *port, struct file * filp) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* shutdown our bulk read */ usb_kill_urb(port->read_urb); @@ -200,7 +200,7 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, int bytes_sent = 0; int transfer_size; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); while (count > 0) { @@ -219,14 +219,14 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, spin_unlock_irqrestore (&write_urb_pool_lock, flags); if (urb == NULL) { - dbg("%s - no more free urbs", __FUNCTION__); + dbg("%s - no more free urbs", __func__); goto exit; } if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); if (urb->transfer_buffer == NULL) { - dev_err(&port->dev, "%s no more kernel memory...\n", __FUNCTION__); + dev_err(&port->dev, "%s no more kernel memory...\n", __func__); goto exit; } } @@ -235,7 +235,7 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, memcpy (urb->transfer_buffer, current_position, transfer_size); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer); /* build up our urb */ usb_fill_bulk_urb ( @@ -251,7 +251,7 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { - dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status); bytes_sent = status; break; } @@ -275,7 +275,7 @@ static int empeg_write_room (struct usb_serial_port *port) int i; int room = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave (&write_urb_pool_lock, flags); @@ -288,7 +288,7 @@ static int empeg_write_room (struct usb_serial_port *port) spin_unlock_irqrestore (&write_urb_pool_lock, flags); - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return (room); @@ -301,7 +301,7 @@ static int empeg_chars_in_buffer (struct usb_serial_port *port) int i; int chars = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave (&write_urb_pool_lock, flags); @@ -314,7 +314,7 @@ static int empeg_chars_in_buffer (struct usb_serial_port *port) spin_unlock_irqrestore (&write_urb_pool_lock, flags); - dbg("%s - returns %d", __FUNCTION__, chars); + dbg("%s - returns %d", __func__, chars); return (chars); @@ -326,11 +326,11 @@ static void empeg_write_bulk_callback (struct urb *urb) struct usb_serial_port *port = urb->context; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } @@ -346,15 +346,15 @@ static void empeg_read_bulk_callback (struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); tty = port->tty; @@ -379,7 +379,7 @@ static void empeg_read_bulk_callback (struct urb *urb) result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); return; @@ -388,7 +388,7 @@ static void empeg_read_bulk_callback (struct urb *urb) static void empeg_throttle (struct usb_serial_port *port) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); } @@ -397,14 +397,14 @@ static void empeg_unthrottle (struct usb_serial_port *port) { int result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); return; } @@ -414,14 +414,14 @@ static int empeg_startup (struct usb_serial *serial) { int r; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (serial->dev->actconfig->desc.bConfigurationValue != 1) { err("active config #%d != 1 ??", serial->dev->actconfig->desc.bConfigurationValue); return -ENODEV; } - dbg("%s - reset config", __FUNCTION__); + dbg("%s - reset config", __func__); r = usb_reset_configuration (serial->dev); /* continue on with initialization */ @@ -432,13 +432,13 @@ static int empeg_startup (struct usb_serial *serial) static void empeg_shutdown (struct usb_serial *serial) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } static int empeg_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) { - dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); + dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); return -ENOIOCTLCMD; } @@ -447,7 +447,7 @@ static int empeg_ioctl (struct usb_serial_port *port, struct file * file, unsign static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) { struct ktermios *termios = port->tty->termios; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* * The empeg-car player wants these particular tty settings. @@ -514,7 +514,7 @@ static int __init empeg_init (void) urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { err("%s - out of memory for urb buffers.", - __FUNCTION__); + __func__); continue; } } diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c index 3f698baa0abb..cc4fbd9d60be 100644 --- a/drivers/usb/serial/ezusb.c +++ b/drivers/usb/serial/ezusb.c @@ -27,13 +27,13 @@ int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *da /* dbg("ezusb_writememory %x, %d", address, length); */ if (!serial->dev) { - err("%s - no physical device present, failing.", __FUNCTION__); + err("%s - no physical device present, failing.", __func__); return -ENODEV; } transfer_buffer = kmemdup(data, length, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, length); + dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, length); return -ENOMEM; } result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), bRequest, 0x40, address, 0, transfer_buffer, length, 3000); @@ -45,10 +45,10 @@ int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit) { int response; - /* dbg("%s - %d", __FUNCTION__, reset_bit); */ + /* dbg("%s - %d", __func__, reset_bit); */ response = ezusb_writememory (serial, CPUCS_REG, &reset_bit, 1, 0xa0); if (response < 0) - dev_err(&serial->dev->dev, "%s- %d failed\n", __FUNCTION__, reset_bit); + dev_err(&serial->dev->dev, "%s- %d failed\n", __func__, reset_bit); return response; } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 54b502f2924c..8b531b377dcb 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -525,7 +525,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int rv; if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { - dbg("%s - DTR|RTS not being set|cleared", __FUNCTION__); + dbg("%s - DTR|RTS not being set|cleared", __func__); return 0; /* no change */ } @@ -553,13 +553,13 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned kfree(buf); if (rv < 0) { err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s", - __FUNCTION__, + __func__, (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); } else { - dbg("%s - DTR %s, RTS %s", __FUNCTION__, + dbg("%s - DTR %s, RTS %s", __func__, (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", (set & TIOCM_RTS) ? "HIGH" : @@ -639,7 +639,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) /* 1. Get the baud rate from the tty settings, this observes alt_speed hack */ baud = tty_get_baud_rate(port->tty); - dbg("%s - tty_get_baud_rate reports speed %d", __FUNCTION__, baud); + dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud); /* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */ @@ -647,7 +647,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (priv->custom_divisor)) { baud = priv->baud_base / priv->custom_divisor; - dbg("%s - custom divisor %d sets baud rate to %d", __FUNCTION__, priv->custom_divisor, baud); + dbg("%s - custom divisor %d sets baud rate to %d", __func__, priv->custom_divisor, baud); } /* 3. Convert baudrate to device-specific divisor */ @@ -668,7 +668,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) case 115200: div_value = ftdi_sio_b115200; break; } /* baud */ if (div_value == 0) { - dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud); + dbg("%s - Baudrate (%d) requested is not supported", __func__, baud); div_value = ftdi_sio_b9600; baud = 9600; div_okay = 0; @@ -678,7 +678,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) if (baud <= 3000000) { div_value = ftdi_232am_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __FUNCTION__); + dbg("%s - Baud rate too high!", __func__); baud = 9600; div_value = ftdi_232am_baud_to_divisor(9600); div_okay = 0; @@ -690,7 +690,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) if (baud <= 3000000) { div_value = ftdi_232bm_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __FUNCTION__); + dbg("%s - Baud rate too high!", __func__); div_value = ftdi_232bm_baud_to_divisor(9600); div_okay = 0; baud = 9600; @@ -700,7 +700,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) if (div_okay) { dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s", - __FUNCTION__, baud, (unsigned long)div_value, + __func__, baud, (unsigned long)div_value, ftdi_chip_name[priv->chip_type]); } @@ -801,7 +801,7 @@ static void ftdi_determine_type(struct usb_serial_port *port) version = le16_to_cpu(udev->descriptor.bcdDevice); interfaces = udev->actconfig->desc.bNumInterfaces; - dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __FUNCTION__, + dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __func__, version, interfaces); if (interfaces > 1) { int inter; @@ -819,7 +819,7 @@ static void ftdi_determine_type(struct usb_serial_port *port) * to 0x200 when iSerialNumber is 0. */ if (version < 0x500) { dbg("%s: something fishy - bcdDevice too low for multi-interface device", - __FUNCTION__); + __func__); } } else if (version < 0x200) { /* Old device. Assume its the original SIO. */ @@ -857,7 +857,7 @@ static ssize_t show_latency_timer(struct device *dev, struct device_attribute *a int rv = 0; - dbg("%s",__FUNCTION__); + dbg("%s",__func__); rv = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), @@ -884,7 +884,7 @@ static ssize_t store_latency_timer(struct device *dev, struct device_attribute * int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - dbg("%s: setting latency timer = %i", __FUNCTION__, v); + dbg("%s: setting latency timer = %i", __func__, v); rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -913,7 +913,7 @@ static ssize_t store_event_char(struct device *dev, struct device_attribute *att int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - dbg("%s: setting event char = %i", __FUNCTION__, v); + dbg("%s: setting event char = %i", __func__, v); rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -938,7 +938,7 @@ static int create_sysfs_attrs(struct usb_serial_port *port) struct ftdi_private *priv = usb_get_serial_port_data(port); int retval = 0; - dbg("%s",__FUNCTION__); + dbg("%s",__func__); /* XXX I've no idea if the original SIO supports the event_char * sysfs parameter, so I'm playing it safe. */ @@ -960,7 +960,7 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - dbg("%s",__FUNCTION__); + dbg("%s",__func__); /* XXX see create_sysfs_attrs */ if (priv->chip_type != SIO) { @@ -1002,11 +1002,11 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial); - dbg("%s",__FUNCTION__); + dbg("%s",__func__); priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); if (!priv){ - err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct ftdi_private)); + err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct ftdi_private)); return -ENOMEM; } @@ -1055,7 +1055,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) /* Called from usbserial:serial_probe */ static void ftdi_USB_UIRT_setup (struct ftdi_private *priv) { - dbg("%s",__FUNCTION__); + dbg("%s",__func__); priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 77; @@ -1066,7 +1066,7 @@ static void ftdi_USB_UIRT_setup (struct ftdi_private *priv) * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */ static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv) { - dbg("%s",__FUNCTION__); + dbg("%s",__func__); priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 240; @@ -1084,7 +1084,7 @@ static int ftdi_jtag_probe(struct usb_serial *serial) struct usb_device *udev = serial->dev; struct usb_interface *interface = serial->interface; - dbg("%s",__FUNCTION__); + dbg("%s",__func__); if (interface == udev->actconfig->interface[0]) { info("Ignoring serial port reserved for JTAG"); @@ -1120,14 +1120,14 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial) */ static void ftdi_shutdown (struct usb_serial *serial) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static int ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - dbg("%s", __FUNCTION__); + dbg("%s", __func__); remove_sysfs_attrs(port); @@ -1152,7 +1152,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) int result = 0; char buf[1]; /* Needed for the usb_control_msg I think */ - dbg("%s", __FUNCTION__); + dbg("%s", __func__); spin_lock_irqsave(&priv->tx_lock, flags); priv->tx_bytes = 0; @@ -1197,7 +1197,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) ftdi_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - err("%s - failed submitting read urb, error %d", __FUNCTION__, result); + err("%s - failed submitting read urb, error %d", __func__, result); return result; @@ -1219,7 +1219,7 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) struct ftdi_private *priv = usb_get_serial_port_data(port); char buf[1]; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); mutex_lock(&port->serial->disc_mutex); if (c_cflag & HUPCL && !port->serial->disconnected){ @@ -1266,7 +1266,7 @@ static int ftdi_write (struct usb_serial_port *port, int transfer_size; unsigned long flags; - dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count); + dbg("%s port %d, %d bytes", __func__, port->number, count); if (count == 0) { dbg("write request of 0 bytes"); @@ -1275,7 +1275,7 @@ static int ftdi_write (struct usb_serial_port *port, spin_lock_irqsave(&priv->tx_lock, flags); if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->tx_lock, flags); - dbg("%s - write limit hit\n", __FUNCTION__); + dbg("%s - write limit hit\n", __func__); return 0; } priv->tx_outstanding_urbs++; @@ -1295,14 +1295,14 @@ static int ftdi_write (struct usb_serial_port *port, buffer = kmalloc (transfer_size, GFP_ATOMIC); if (!buffer) { - err("%s ran out of kernel memory for urb ...", __FUNCTION__); + err("%s ran out of kernel memory for urb ...", __func__); count = -ENOMEM; goto error_no_buffer; } urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { - err("%s - no more free urbs", __FUNCTION__); + err("%s - no more free urbs", __func__); count = -ENOMEM; goto error_no_urb; } @@ -1334,7 +1334,7 @@ static int ftdi_write (struct usb_serial_port *port, memcpy (buffer, buf, count); } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, buffer); + usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, buffer); /* fill the buffer and send it */ usb_fill_bulk_urb(urb, port->serial->dev, @@ -1344,7 +1344,7 @@ static int ftdi_write (struct usb_serial_port *port, status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { - err("%s - failed submitting write urb, error %d", __FUNCTION__, status); + err("%s - failed submitting write urb, error %d", __func__, status); count = status; goto error; } else { @@ -1358,7 +1358,7 @@ static int ftdi_write (struct usb_serial_port *port, * really free it when it is finished with it */ usb_free_urb(urb); - dbg("%s write returning: %d", __FUNCTION__, count); + dbg("%s write returning: %d", __func__, count); return count; error: usb_free_urb(urb); @@ -1386,7 +1386,7 @@ static void ftdi_write_bulk_callback (struct urb *urb) /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree (urb->transfer_buffer); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("nonzero write bulk status received: %d", status); @@ -1395,7 +1395,7 @@ static void ftdi_write_bulk_callback (struct urb *urb) priv = usb_get_serial_port_data(port); if (!priv) { - dbg("%s - bad port private data pointer - exiting", __FUNCTION__); + dbg("%s - bad port private data pointer - exiting", __func__); return; } /* account for transferred data */ @@ -1420,7 +1420,7 @@ static int ftdi_write_room( struct usb_serial_port *port ) int room; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->tx_lock, flags); if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) { @@ -1444,13 +1444,13 @@ static int ftdi_chars_in_buffer (struct usb_serial_port *port) int buffered; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->tx_lock, flags); buffered = (int)priv->tx_outstanding_bytes; spin_unlock_irqrestore(&priv->tx_lock, flags); if (buffered < 0) { - err("%s outstanding tx bytes is negative!", __FUNCTION__); + err("%s outstanding tx bytes is negative!", __func__); buffered = 0; } return buffered; @@ -1468,30 +1468,30 @@ static void ftdi_read_bulk_callback (struct urb *urb) int status = urb->status; if (urb->number_of_packets > 0) { - err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__, + err("%s transfer_buffer_length %d actual_length %d number of packets %d",__func__, urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets ); - err("%s transfer_flags %x ", __FUNCTION__,urb->transfer_flags ); + err("%s transfer_flags %x ", __func__,urb->transfer_flags ); } - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (port->open_count <= 0) return; tty = port->tty; if (!tty) { - dbg("%s - bad tty pointer - exiting",__FUNCTION__); + dbg("%s - bad tty pointer - exiting",__func__); return; } priv = usb_get_serial_port_data(port); if (!priv) { - dbg("%s - bad port private data pointer - exiting", __FUNCTION__); + dbg("%s - bad port private data pointer - exiting", __func__); return; } if (urb != port->read_urb) { - err("%s - Not my urb!", __FUNCTION__); + err("%s - Not my urb!", __func__); } if (status) { @@ -1529,39 +1529,39 @@ static void ftdi_process_read (struct work_struct *work) int packet_offset; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (port->open_count <= 0) return; tty = port->tty; if (!tty) { - dbg("%s - bad tty pointer - exiting",__FUNCTION__); + dbg("%s - bad tty pointer - exiting",__func__); return; } priv = usb_get_serial_port_data(port); if (!priv) { - dbg("%s - bad port private data pointer - exiting", __FUNCTION__); + dbg("%s - bad port private data pointer - exiting", __func__); return; } urb = port->read_urb; if (!urb) { - dbg("%s - bad read_urb pointer - exiting", __FUNCTION__); + dbg("%s - bad read_urb pointer - exiting", __func__); return; } data = urb->transfer_buffer; if (priv->rx_processed) { - dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__, + dbg("%s - already processed: %d bytes, %d remain", __func__, priv->rx_processed, urb->actual_length - priv->rx_processed); } else { /* The first two bytes of every read packet are status */ if (urb->actual_length > 2) { - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); } else { dbg("Status only: %03oo %03oo",data[0],data[1]); } @@ -1591,17 +1591,17 @@ static void ftdi_process_read (struct work_struct *work) length = min(PKTSZ, urb->actual_length-packet_offset)-2; if (length < 0) { - err("%s - bad packet length: %d", __FUNCTION__, length+2); + err("%s - bad packet length: %d", __func__, length+2); length = 0; } if (priv->rx_flags & THROTTLED) { - dbg("%s - throttled", __FUNCTION__); + dbg("%s - throttled", __func__); break; } if (tty_buffer_request_room(tty, length) < length) { /* break out & wait for throttling/unthrottling to happen */ - dbg("%s - receive room low", __FUNCTION__); + dbg("%s - receive room low", __func__); break; } @@ -1669,7 +1669,7 @@ static void ftdi_process_read (struct work_struct *work) /* not completely processed - record progress */ priv->rx_processed = packet_offset; dbg("%s - incomplete, %d bytes processed, %d remain", - __FUNCTION__, packet_offset, + __func__, packet_offset, urb->actual_length - packet_offset); /* check if we were throttled while processing */ spin_lock_irqsave(&priv->rx_lock, flags); @@ -1677,7 +1677,7 @@ static void ftdi_process_read (struct work_struct *work) priv->rx_flags |= ACTUALLY_THROTTLED; spin_unlock_irqrestore(&priv->rx_lock, flags); dbg("%s - deferring remainder until unthrottled", - __FUNCTION__); + __func__); return; } spin_unlock_irqrestore(&priv->rx_lock, flags); @@ -1686,7 +1686,7 @@ static void ftdi_process_read (struct work_struct *work) /* delay processing of remainder */ schedule_delayed_work(&priv->rx_work, 1); } else { - dbg("%s - port is closed", __FUNCTION__); + dbg("%s - port is closed", __func__); } return; } @@ -1704,7 +1704,7 @@ static void ftdi_process_read (struct work_struct *work) result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); + err("%s - failed resubmitting read urb, error %d", __func__, result); } return; @@ -1733,10 +1733,10 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("%s FAILED to enable/disable break state (state was %d)", __FUNCTION__,break_state); + err("%s FAILED to enable/disable break state (state was %d)", __func__,break_state); } - dbg("%s break state is %d - urb is %d", __FUNCTION__,break_state, urb_value); + dbg("%s break state is %d - urb is %d", __func__,break_state, urb_value); } @@ -1760,18 +1760,18 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old unsigned char vstop; unsigned char vstart; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Force baud rate if this device requires it, unless it is set to B0. */ if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) { - dbg("%s: forcing baud rate for this device", __FUNCTION__); + dbg("%s: forcing baud rate for this device", __func__); tty_encode_baud_rate(port->tty, priv->force_baud, priv->force_baud); } /* Force RTS-CTS if this device requires it. */ if (priv->force_rtscts) { - dbg("%s: forcing rtscts for this device", __FUNCTION__); + dbg("%s: forcing rtscts for this device", __func__); termios->c_cflag |= CRTSCTS; } @@ -1815,7 +1815,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_SHORT_TIMEOUT) < 0) { - err("%s FAILED to set databits/stopbits/parity", __FUNCTION__); + err("%s FAILED to set databits/stopbits/parity", __func__); } /* Now do the baudrate */ @@ -1826,14 +1826,14 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("%s error from disable flowcontrol urb", __FUNCTION__); + err("%s error from disable flowcontrol urb", __func__); } /* Drop RTS and DTR */ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); } else { /* set the baudrate determined before */ if (change_speed(port)) { - err("%s urb failed to set baudrate", __FUNCTION__); + err("%s urb failed to set baudrate", __func__); } /* Ensure RTS and DTR are raised when baudrate changed from 0 */ if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) { @@ -1844,7 +1844,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old /* Set flow control */ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ if (cflag & CRTSCTS) { - dbg("%s Setting to CRTSCTS flow control", __FUNCTION__); + dbg("%s Setting to CRTSCTS flow control", __func__); if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, @@ -1862,7 +1862,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old * if IXOFF is not set, the pre-xon/xoff code is executed. */ if (iflag & IXOFF) { - dbg("%s request to enable xonxoff iflag=%04x",__FUNCTION__,iflag); + dbg("%s request to enable xonxoff iflag=%04x",__func__,iflag); // Try to enable the XON/XOFF on the ftdi_sio // Set the vstart and vstop -- could have been done up above where // a lot of other dereferencing is done but that would be very @@ -1883,7 +1883,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old } else { /* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */ /* CHECKME Assuming XON/XOFF handled by tty stack - not by device */ - dbg("%s Turning off hardware flow control", __FUNCTION__); + dbg("%s Turning off hardware flow control", __func__); if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, @@ -1905,7 +1905,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) unsigned char buf[2]; int ret; - dbg("%s TIOCMGET", __FUNCTION__); + dbg("%s TIOCMGET", __func__); switch (priv->chip_type) { case SIO: /* Request the status from the device */ @@ -1915,7 +1915,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, 0, 0, buf, 1, WDR_TIMEOUT)) < 0 ) { - err("%s Could not get modem status of device - err: %d", __FUNCTION__, + err("%s Could not get modem status of device - err: %d", __func__, ret); return(ret); } @@ -1932,7 +1932,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, 0, priv->interface, buf, 2, WDR_TIMEOUT)) < 0 ) { - err("%s Could not get modem status of device - err: %d", __FUNCTION__, + err("%s Could not get modem status of device - err: %d", __func__, ret); return(ret); } @@ -1951,7 +1951,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear) { - dbg("%s TIOCMSET", __FUNCTION__); + dbg("%s TIOCMSET", __func__); return update_mctrl(port, set, clear); } @@ -1960,7 +1960,7 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne { struct ftdi_private *priv = usb_get_serial_port_data(port); - dbg("%s cmd 0x%04x", __FUNCTION__, cmd); + dbg("%s cmd 0x%04x", __func__, cmd); /* Based on code from acm.c and others */ switch (cmd) { @@ -2019,7 +2019,7 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne /* This is not necessarily an error - turns out the higher layers will do * some ioctls itself (see comment above) */ - dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __FUNCTION__, cmd); + dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd); return(-ENOIOCTLCMD); } /* ftdi_ioctl */ @@ -2030,7 +2030,7 @@ static void ftdi_throttle (struct usb_serial_port *port) struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->rx_lock, flags); priv->rx_flags |= THROTTLED; @@ -2044,7 +2044,7 @@ static void ftdi_unthrottle (struct usb_serial_port *port) int actually_throttled; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->rx_lock, flags); actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; @@ -2059,7 +2059,7 @@ static int __init ftdi_init (void) { int retval; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (vendor > 0 && product > 0) { /* Add user specified VID/PID to reserved element of table. */ int i; @@ -2088,7 +2088,7 @@ failed_sio_register: static void __exit ftdi_exit (void) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); usb_deregister (&ftdi_driver); usb_serial_deregister (&ftdi_sio_device); diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 87b77f92ae07..513d771adc4e 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -280,7 +280,7 @@ static void send_to_tty(struct usb_serial_port *port, if (tty && actual_length) { usb_serial_debug_data(debug, &port->dev, - __FUNCTION__, actual_length, data); + __func__, actual_length, data); tty_buffer_request_room(tty, actual_length); tty_insert_flip_string(tty, data, actual_length); @@ -355,7 +355,7 @@ static void pkt_clear(struct garmin_data * garmin_data_p) unsigned long flags; struct garmin_packet *result = NULL; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); spin_lock_irqsave(&garmin_data_p->lock, flags); while (!list_empty(&garmin_data_p->pktlist)) { @@ -379,7 +379,7 @@ static int gsp_send_ack(struct garmin_data * garmin_data_p, __u8 pkt_id) __u8 *ptr = pkt; unsigned l = 0; - dbg("%s - pkt-id: 0x%X.", __FUNCTION__, 0xFF & pkt_id); + dbg("%s - pkt-id: 0x%X.", __func__, 0xFF & pkt_id); *ptr++ = DLE; *ptr++ = ACK; @@ -429,11 +429,11 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) int size = recpkt[1]; usb_serial_debug_data(debug, &garmin_data_p->port->dev, - __FUNCTION__, count-GSP_INITIAL_OFFSET, recpkt); + __func__, count-GSP_INITIAL_OFFSET, recpkt); if (size != (count-GSP_INITIAL_OFFSET-3)) { dbg("%s - invalid size, expected %d bytes, got %d", - __FUNCTION__, size, (count-GSP_INITIAL_OFFSET-3)); + __func__, size, (count-GSP_INITIAL_OFFSET-3)); return -EINVPKT; } @@ -443,7 +443,7 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) // sanity check, remove after test ... if ((__u8*)&(usbdata[3]) != recpkt) { dbg("%s - ptr mismatch %p - %p", - __FUNCTION__, &(usbdata[4]), recpkt); + __func__, &(usbdata[4]), recpkt); return -EINVPKT; } @@ -454,7 +454,7 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) if ((0xff & (cksum + *recpkt)) != 0) { dbg("%s - invalid checksum, expected %02x, got %02x", - __FUNCTION__, 0xff & -cksum, 0xff & *recpkt); + __func__, 0xff & -cksum, 0xff & *recpkt); return -EINVPKT; } @@ -519,7 +519,7 @@ static int gsp_receive(struct garmin_data * garmin_data_p, spin_unlock_irqrestore(&garmin_data_p->lock, flags); dbg("%s - dle=%d skip=%d size=%d count=%d", - __FUNCTION__, dleSeen, skip, size, count); + __func__, dleSeen, skip, size, count); if (size == 0) { size = GSP_INITIAL_OFFSET; @@ -578,7 +578,7 @@ static int gsp_receive(struct garmin_data * garmin_data_p, } if (size >= GPS_IN_BUFSIZ) { - dbg("%s - packet too large.", __FUNCTION__); + dbg("%s - packet too large.", __func__); skip = 1; size = GSP_INITIAL_OFFSET; dleSeen = 0; @@ -634,7 +634,7 @@ static int gsp_send(struct garmin_data * garmin_data_p, int i=0; int k; - dbg("%s - state %d - %d bytes.", __FUNCTION__, + dbg("%s - state %d - %d bytes.", __func__, garmin_data_p->state, count); k = garmin_data_p->outsize; @@ -658,13 +658,13 @@ static int gsp_send(struct garmin_data * garmin_data_p, return 0; } - dbg("%s - %d bytes in buffer, %d bytes in pkt.", __FUNCTION__, + dbg("%s - %d bytes in buffer, %d bytes in pkt.", __func__, k, i); /* garmin_data_p->outbuffer now contains a complete packet */ usb_serial_debug_data(debug, &garmin_data_p->port->dev, - __FUNCTION__, k, garmin_data_p->outbuffer); + __func__, k, garmin_data_p->outbuffer); garmin_data_p->outsize = 0; @@ -749,7 +749,7 @@ static void gsp_next_packet(struct garmin_data * garmin_data_p) struct garmin_packet *pkt = NULL; while ((pkt = pkt_pop(garmin_data_p)) != NULL) { - dbg("%s - next pkt: %d", __FUNCTION__, pkt->seq); + dbg("%s - next pkt: %d", __func__, pkt->seq); if (gsp_send(garmin_data_p, pkt->data, pkt->size) > 0) { kfree(pkt); return; @@ -794,7 +794,7 @@ static int nat_receive(struct garmin_data * garmin_data_p, if (len >= GPS_IN_BUFSIZ) { /* seem to be an invalid packet, ignore rest of input */ dbg("%s - packet size too large: %d", - __FUNCTION__, len); + __func__, len); garmin_data_p->insize = 0; count = 0; result = -EINVPKT; @@ -873,11 +873,11 @@ static int process_resetdev_request(struct usb_serial_port *port) spin_unlock_irqrestore(&garmin_data_p->lock, flags); usb_kill_urb (port->interrupt_in_urb); - dbg("%s - usb_reset_device", __FUNCTION__ ); + dbg("%s - usb_reset_device", __func__ ); status = usb_reset_device(port->serial->dev); if (status) dbg("%s - usb_reset_device failed: %d", - __FUNCTION__, status); + __func__, status); return status; } @@ -926,18 +926,18 @@ static int garmin_init_session(struct usb_serial_port *port) if (status == 0) { usb_kill_urb (port->interrupt_in_urb); - dbg("%s - adding interrupt input", __FUNCTION__); + dbg("%s - adding interrupt input", __func__); port->interrupt_in_urb->dev = serial->dev; status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (status) dev_err(&serial->dev->dev, "%s - failed submitting interrupt urb," " error %d\n", - __FUNCTION__, status); + __func__, status); } if (status == 0) { - dbg("%s - starting session ...", __FUNCTION__); + dbg("%s - starting session ...", __func__); garmin_data_p->state = STATE_ACTIVE; status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ, sizeof(GARMIN_START_SESSION_REQ), @@ -976,7 +976,7 @@ static int garmin_open (struct usb_serial_port *port, struct file *filp) int status = 0; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* * Force low_latency on so that our tty_push actually forces the data @@ -1013,7 +1013,7 @@ static void garmin_close (struct usb_serial_port *port, struct file * filp) struct usb_serial *serial = port->serial; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); - dbg("%s - port %d - mode=%d state=%d flags=0x%X", __FUNCTION__, + dbg("%s - port %d - mode=%d state=%d flags=0x%X", __func__, port->number, garmin_data_p->mode, garmin_data_p->state, garmin_data_p->flags); @@ -1052,7 +1052,7 @@ static void garmin_write_bulk_callback (struct urb *urb) if (port) { struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer) && (garmin_data_p->mode == MODE_GARMIN_SERIAL)) { @@ -1061,7 +1061,7 @@ static void garmin_write_bulk_callback (struct urb *urb) if (status) { dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, urb->status); + __func__, urb->status); spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= CLEAR_HALT_REQUIRED; spin_unlock_irqrestore(&garmin_data_p->lock, flags); @@ -1088,7 +1088,7 @@ static int garmin_write_bulk (struct usb_serial_port *port, unsigned char *buffer; int status; - dbg("%s - port %d, state %d", __FUNCTION__, port->number, + dbg("%s - port %d, state %d", __func__, port->number, garmin_data_p->state); spin_lock_irqsave(&garmin_data_p->lock, flags); @@ -1110,7 +1110,7 @@ static int garmin_write_bulk (struct usb_serial_port *port, memcpy (buffer, buf, count); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); usb_fill_bulk_urb (urb, serial->dev, usb_sndbulkpipe (serial->dev, @@ -1134,7 +1134,7 @@ static int garmin_write_bulk (struct usb_serial_port *port, dev_err(&port->dev, "%s - usb_submit_urb(write bulk) " "failed with status = %d\n", - __FUNCTION__, status); + __func__, status); count = status; } @@ -1154,7 +1154,7 @@ static int garmin_write (struct usb_serial_port *port, struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); __le32 *privpkt = (__le32 *)garmin_data_p->privpkt; - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buf); + usb_serial_debug_data(debug, &port->dev, __func__, count, buf); /* check for our private packets */ if (count >= GARMIN_PKTHDR_LENGTH) { @@ -1172,7 +1172,7 @@ static int garmin_write (struct usb_serial_port *port, && GARMIN_LAYERID_PRIVATE == getLayerId(garmin_data_p->privpkt)) { dbg("%s - processing private request %d", - __FUNCTION__, pktid); + __func__, pktid); // drop all unfinished transfers garmin_clear(garmin_data_p); @@ -1184,7 +1184,7 @@ static int garmin_write (struct usb_serial_port *port, return -EINVPKT; debug = __le32_to_cpu(privpkt[3]); dbg("%s - debug level set to 0x%X", - __FUNCTION__, debug); + __func__, debug); break; case PRIV_PKTID_SET_MODE: @@ -1192,7 +1192,7 @@ static int garmin_write (struct usb_serial_port *port, return -EINVPKT; garmin_data_p->mode = __le32_to_cpu(privpkt[3]); dbg("%s - mode set to %d", - __FUNCTION__, garmin_data_p->mode); + __func__, garmin_data_p->mode); break; case PRIV_PKTID_INFO_REQ: @@ -1208,7 +1208,7 @@ static int garmin_write (struct usb_serial_port *port, return -EINVPKT; initial_mode = __le32_to_cpu(privpkt[3]); dbg("%s - initial_mode set to %d", - __FUNCTION__, + __func__, garmin_data_p->mode); break; } @@ -1255,7 +1255,7 @@ static void garmin_read_process(struct garmin_data * garmin_data_p, { if (garmin_data_p->flags & FLAGS_DROP_DATA) { /* abort-transfer cmd is actice */ - dbg("%s - pkt dropped", __FUNCTION__); + dbg("%s - pkt dropped", __func__); } else if (garmin_data_p->state != STATE_DISCONNECTED && garmin_data_p->state != STATE_RESET ) { @@ -1293,21 +1293,21 @@ static void garmin_read_bulk_callback (struct urb *urb) int status = urb->status; int retval; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!serial) { - dbg("%s - bad serial pointer, exiting", __FUNCTION__); + dbg("%s - bad serial pointer, exiting", __func__); return; } if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } usb_serial_debug_data(debug, &port->dev, - __FUNCTION__, urb->actual_length, data); + __func__, urb->actual_length, data); garmin_read_process(garmin_data_p, data, urb->actual_length); @@ -1320,7 +1320,7 @@ static void garmin_read_bulk_callback (struct urb *urb) if (retval) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", - __FUNCTION__, retval); + __func__, retval); } else if (urb->actual_length > 0) { /* Continue trying to read until nothing more is received */ if (0 == (garmin_data_p->flags & FLAGS_THROTTLED)) { @@ -1328,10 +1328,10 @@ static void garmin_read_bulk_callback (struct urb *urb) if (retval) dev_err(&port->dev, "%s - failed resubmitting read urb, " - "error %d\n", __FUNCTION__, retval); + "error %d\n", __func__, retval); } } else { - dbg("%s - end of bulk data", __FUNCTION__); + dbg("%s - end of bulk data", __func__); spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE; spin_unlock_irqrestore(&garmin_data_p->lock, flags); @@ -1359,22 +1359,22 @@ static void garmin_read_int_callback (struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dbg("%s - nonzero urb status received: %d", - __FUNCTION__, status); + __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, urb->transfer_buffer); if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) && 0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY, sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) { - dbg("%s - bulk data available.", __FUNCTION__); + dbg("%s - bulk data available.", __func__); if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) { @@ -1389,7 +1389,7 @@ static void garmin_read_int_callback (struct urb *urb) if (retval) { dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", - __FUNCTION__, retval); + __func__, retval); } else { spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE; @@ -1417,14 +1417,14 @@ static void garmin_read_int_callback (struct urb *urb) = __le32_to_cpup((__le32*)(data+GARMIN_PKTHDR_LENGTH)); dbg("%s - start-of-session reply seen - serial %u.", - __FUNCTION__, garmin_data_p->serial_num); + __func__, garmin_data_p->serial_num); } if (garmin_data_p->ignorePkts) { /* this reply belongs to a request generated by the driver, ignore it. */ dbg("%s - pkt ignored (%d)", - __FUNCTION__, garmin_data_p->ignorePkts); + __func__, garmin_data_p->ignorePkts); spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->ignorePkts--; spin_unlock_irqrestore(&garmin_data_p->lock, flags); @@ -1437,7 +1437,7 @@ static void garmin_read_int_callback (struct urb *urb) if (retval) dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n", - __FUNCTION__, retval); + __func__, retval); } @@ -1473,7 +1473,7 @@ static void garmin_throttle (struct usb_serial_port *port) unsigned long flags; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* set flag, data received will be put into a queue for later processing */ spin_lock_irqsave(&garmin_data_p->lock, flags); @@ -1488,7 +1488,7 @@ static void garmin_unthrottle (struct usb_serial_port *port) struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags &= ~FLAGS_THROTTLED; spin_unlock_irqrestore(&garmin_data_p->lock, flags); @@ -1503,7 +1503,7 @@ static void garmin_unthrottle (struct usb_serial_port *port) if (status) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", - __FUNCTION__, status); + __func__, status); } } @@ -1532,11 +1532,11 @@ static int garmin_attach (struct usb_serial *serial) struct usb_serial_port *port = serial->port[0]; struct garmin_data * garmin_data_p = NULL; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); if (garmin_data_p == NULL) { - dev_err(&port->dev, "%s - Out of memory\n", __FUNCTION__); + dev_err(&port->dev, "%s - Out of memory\n", __func__); return -ENOMEM; } init_timer(&garmin_data_p->timer); @@ -1561,7 +1561,7 @@ static void garmin_shutdown (struct usb_serial *serial) struct usb_serial_port *port = serial->port[0]; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); - dbg("%s", __FUNCTION__); + dbg("%s", __func__); usb_kill_urb (port->interrupt_in_urb); del_timer_sync(&garmin_data_p->timer); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 5b0952054dec..2078667db4aa 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -118,7 +118,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp) int result = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* force low_latency on so that our tty_push actually forces the data through, otherwise it is scheduled, and with high data rates (like with OHCI) data @@ -145,7 +145,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp) port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); } return result; @@ -156,7 +156,7 @@ static void generic_cleanup (struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (serial->dev) { /* shutdown any bulk reads that might be going on */ @@ -194,7 +194,7 @@ int usb_serial_generic_resume(struct usb_serial *serial) void usb_serial_generic_close (struct usb_serial_port *port, struct file * filp) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); generic_cleanup (port); } @@ -204,10 +204,10 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char * int result; unsigned char *data; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (count == 0) { - dbg("%s - write request of 0 bytes", __FUNCTION__); + dbg("%s - write request of 0 bytes", __func__); return (0); } @@ -217,7 +217,7 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char * spin_lock_irqsave(&port->lock, flags); if (port->write_urb_busy) { spin_unlock_irqrestore(&port->lock, flags); - dbg("%s - already writing", __FUNCTION__); + dbg("%s - already writing", __func__); return 0; } port->write_urb_busy = 1; @@ -227,7 +227,7 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char * memcpy (port->write_urb->transfer_buffer, buf, count); data = port->write_urb->transfer_buffer; - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, data); + usb_serial_debug_data(debug, &port->dev, __func__, count, data); /* set up our urb */ usb_fill_bulk_urb (port->write_urb, serial->dev, @@ -242,7 +242,7 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char * port->write_urb_busy = 1; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result); /* don't have to grab the lock here, as we will retry if != 0 */ port->write_urb_busy = 0; } else @@ -260,14 +260,14 @@ int usb_serial_generic_write_room (struct usb_serial_port *port) struct usb_serial *serial = port->serial; int room = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (serial->num_bulk_out) { if (!(port->write_urb_busy)) room = port->bulk_out_size; } - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return (room); } @@ -276,14 +276,14 @@ int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port) struct usb_serial *serial = port->serial; int chars = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (serial->num_bulk_out) { if (port->write_urb_busy) chars = port->write_urb->transfer_buffer_length; } - dbg("%s - returns %d", __FUNCTION__, chars); + dbg("%s - returns %d", __func__, chars); return (chars); } @@ -305,7 +305,7 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags) usb_serial_generic_read_bulk_callback), port); result = usb_submit_urb(urb, mem_flags); if (result) - dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); } /* Push data to tty layer and resubmit the bulk read URB */ @@ -334,15 +334,15 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb) int status = urb->status; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (unlikely(status != 0)) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); /* Throttle the device if requested by tty */ spin_lock_irqsave(&port->lock, flags); @@ -360,12 +360,12 @@ void usb_serial_generic_write_bulk_callback (struct urb *urb) struct usb_serial_port *port = (struct usb_serial_port *)urb->context; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); port->write_urb_busy = 0; if (status) { dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } @@ -377,7 +377,7 @@ void usb_serial_generic_throttle (struct usb_serial_port *port) { unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* Set the throttle request flag. It will be picked up * by usb_serial_generic_read_bulk_callback(). */ @@ -391,7 +391,7 @@ void usb_serial_generic_unthrottle (struct usb_serial_port *port) int was_throttled; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* Clear the throttle flags */ spin_lock_irqsave(&port->lock, flags); @@ -409,7 +409,7 @@ void usb_serial_generic_shutdown (struct usb_serial *serial) { int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* stop reads and writes on all ports */ for (i=0; i < serial->num_ports; ++i) { diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 3428ccc28da7..2b676732e9fa 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -371,7 +371,7 @@ static int get_string (struct usb_device *dev, int Id, char *string, int buflen) struct usb_string_descriptor StringDesc; struct usb_string_descriptor *pStringDesc; - dbg("%s - USB String ID = %d", __FUNCTION__, Id ); + dbg("%s - USB String ID = %d", __func__, Id ); if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) { return 0; @@ -391,7 +391,7 @@ static int get_string (struct usb_device *dev, int Id, char *string, int buflen) unicode_to_ascii(string, buflen, pStringDesc->wData, pStringDesc->bLength/2); kfree(pStringDesc); - dbg("%s - USB String %s", __FUNCTION__, string); + dbg("%s - USB String %s", __func__, string); return strlen(string); } @@ -407,7 +407,7 @@ static int get_string_desc (struct usb_device *dev, int Id, struct usb_string_de struct usb_string_descriptor StringDesc; struct usb_string_descriptor *pStringDesc; - dbg("%s - USB String ID = %d", __FUNCTION__, Id ); + dbg("%s - USB String ID = %d", __func__, Id ); if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) { return 0; @@ -537,7 +537,7 @@ static int get_epic_descriptor(struct edgeport_serial *ep) sizeof(struct edge_compatibility_descriptor), 300); - dbg("%s result = %d", __FUNCTION__, result); + dbg("%s result = %d", __func__, result); if (result > 0) { ep->is_epic = 1; @@ -601,7 +601,7 @@ static void edge_interrupt_callback (struct urb *urb) int result; int status = urb->status; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); switch (status) { case 0: @@ -612,35 +612,35 @@ static void edge_interrupt_callback (struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dbg("%s - nonzero urb status received: %d", - __FUNCTION__, status); + __func__, status); goto exit; } // process this interrupt-read even if there are no ports open if (length) { - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, length, data); + usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data); if (length > 1) { bytes_avail = data[0] | (data[1] << 8); if (bytes_avail) { spin_lock(&edge_serial->es_lock); edge_serial->rxBytesAvail += bytes_avail; - dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __FUNCTION__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress); + dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __func__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress); if (edge_serial->rxBytesAvail > 0 && !edge_serial->read_in_progress) { - dbg("%s - posting a read", __FUNCTION__); + dbg("%s - posting a read", __func__); edge_serial->read_in_progress = true; /* we have pending bytes on the bulk in pipe, send a request */ edge_serial->read_urb->dev = edge_serial->serial->dev; result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); if (result) { - dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __FUNCTION__, result); + dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result); edge_serial->read_in_progress = false; } } @@ -659,7 +659,7 @@ static void edge_interrupt_callback (struct urb *urb) spin_lock(&edge_port->ep_lock); edge_port->txCredits += txCredits; spin_unlock(&edge_port->ep_lock); - dbg("%s - txcredits for port%d = %d", __FUNCTION__, portNumber, edge_port->txCredits); + dbg("%s - txcredits for port%d = %d", __func__, portNumber, edge_port->txCredits); /* tell the tty driver that something has changed */ if (edge_port->port->tty) @@ -677,7 +677,7 @@ static void edge_interrupt_callback (struct urb *urb) exit: result = usb_submit_urb (urb, GFP_ATOMIC); if (result) { - dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __FUNCTION__, result); + dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __func__, result); } } @@ -695,43 +695,43 @@ static void edge_bulk_in_callback (struct urb *urb) __u16 raw_data_length; int status = urb->status; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); edge_serial->read_in_progress = false; return; } if (urb->actual_length == 0) { - dbg("%s - read bulk callback with no data", __FUNCTION__); + dbg("%s - read bulk callback with no data", __func__); edge_serial->read_in_progress = false; return; } raw_data_length = urb->actual_length; - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, raw_data_length, data); + usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, raw_data_length, data); spin_lock(&edge_serial->es_lock); /* decrement our rxBytes available by the number that we just got */ edge_serial->rxBytesAvail -= raw_data_length; - dbg("%s - Received = %d, rxBytesAvail %d", __FUNCTION__, raw_data_length, edge_serial->rxBytesAvail); + dbg("%s - Received = %d, rxBytesAvail %d", __func__, raw_data_length, edge_serial->rxBytesAvail); process_rcvd_data (edge_serial, data, urb->actual_length); /* check to see if there's any more data for us to read */ if (edge_serial->rxBytesAvail > 0) { - dbg("%s - posting a read", __FUNCTION__); + dbg("%s - posting a read", __func__); edge_serial->read_urb->dev = edge_serial->serial->dev; retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); if (retval) { dev_err(&urb->dev->dev, "%s - usb_submit_urb(read bulk) failed, " - "retval = %d\n", __FUNCTION__, retval); + "retval = %d\n", __func__, retval); edge_serial->read_in_progress = false; } } else { @@ -753,11 +753,11 @@ static void edge_bulk_out_data_callback (struct urb *urb) struct tty_struct *tty; int status = urb->status; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (status) { dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); } tty = edge_port->port->tty; @@ -786,10 +786,10 @@ static void edge_bulk_out_cmd_callback (struct urb *urb) struct tty_struct *tty; int status = urb->status; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); atomic_dec(&CmdUrbs); - dbg("%s - FREE URB %p (outstanding %d)", __FUNCTION__, urb, atomic_read(&CmdUrbs)); + dbg("%s - FREE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs)); /* clean up the transfer buffer */ @@ -799,7 +799,7 @@ static void edge_bulk_out_cmd_callback (struct urb *urb) usb_free_urb (urb); if (status) { - dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, status); + dbg("%s - nonzero write bulk status received: %d", __func__, status); return; } @@ -833,7 +833,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) struct edgeport_serial *edge_serial; int response; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return -ENODEV; @@ -883,7 +883,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) * this interrupt will continue as long as the edgeport is connected */ response = usb_submit_urb (edge_serial->interrupt_read_urb, GFP_KERNEL); if (response) { - dev_err(&port->dev, "%s - Error %d submitting control urb\n", __FUNCTION__, response); + dev_err(&port->dev, "%s - Error %d submitting control urb\n", __func__, response); } } @@ -907,7 +907,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) response = send_iosp_ext_cmd (edge_port, IOSP_CMD_OPEN_PORT, 0); if (response < 0) { - dev_err(&port->dev, "%s - error sending open port command\n", __FUNCTION__); + dev_err(&port->dev, "%s - error sending open port command\n", __func__); edge_port->openPending = false; return -ENODEV; } @@ -917,7 +917,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) if (!edge_port->open) { /* open timed out */ - dbg("%s - open timedout", __FUNCTION__); + dbg("%s - open timedout", __func__); edge_port->openPending = false; return -ENODEV; } @@ -930,7 +930,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) edge_port->txfifo.fifo = kmalloc (edge_port->maxTxCredits, GFP_KERNEL); if (!edge_port->txfifo.fifo) { - dbg("%s - no memory", __FUNCTION__); + dbg("%s - no memory", __func__); edge_close (port, filp); return -ENOMEM; } @@ -940,14 +940,14 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) edge_port->write_in_progress = false; if (!edge_port->write_urb) { - dbg("%s - no memory", __FUNCTION__); + dbg("%s - no memory", __func__); edge_close (port, filp); return -ENOMEM; } - dbg("%s(%d) - Initialize TX fifo to %d bytes", __FUNCTION__, port->number, edge_port->maxTxCredits); + dbg("%s(%d) - Initialize TX fifo to %d bytes", __func__, port->number, edge_port->maxTxCredits); - dbg("%s exited", __FUNCTION__); + dbg("%s exited", __func__); return 0; } @@ -976,11 +976,11 @@ static void block_until_chase_response(struct edgeport_port *edge_port) // Did we get our Chase response if (!edge_port->chaseResponsePending) { - dbg("%s - Got Chase Response", __FUNCTION__); + dbg("%s - Got Chase Response", __func__); // did we get all of our credit back? if (edge_port->txCredits == edge_port->maxTxCredits ) { - dbg("%s - Got all credits", __FUNCTION__); + dbg("%s - Got all credits", __func__); return; } } @@ -995,12 +995,12 @@ static void block_until_chase_response(struct edgeport_port *edge_port) loop--; if (loop == 0) { edge_port->chaseResponsePending = false; - dbg("%s - Chase TIMEOUT", __FUNCTION__); + dbg("%s - Chase TIMEOUT", __func__); return; } } else { // Reset timeout value back to 10 seconds - dbg("%s - Last %d, Current %d", __FUNCTION__, lastCredits, edge_port->txCredits); + dbg("%s - Last %d, Current %d", __func__, lastCredits, edge_port->txCredits); loop = 10; } } @@ -1031,7 +1031,7 @@ static void block_until_tx_empty (struct edgeport_port *edge_port) // Is the Edgeport Buffer empty? if (lastCount == 0) { - dbg("%s - TX Buffer Empty", __FUNCTION__); + dbg("%s - TX Buffer Empty", __func__); return; } @@ -1040,13 +1040,13 @@ static void block_until_tx_empty (struct edgeport_port *edge_port) schedule_timeout(timeout); finish_wait(&edge_port->wait_chase, &wait); - dbg("%s wait", __FUNCTION__); + dbg("%s wait", __func__); if (lastCount == fifo->count) { // No activity.. count down. loop--; if (loop == 0) { - dbg("%s - TIMEOUT", __FUNCTION__); + dbg("%s - TIMEOUT", __func__); return; } } else { @@ -1067,7 +1067,7 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) struct edgeport_port *edge_port; int status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); edge_serial = usb_get_serial_data(port->serial); edge_port = usb_get_serial_port_data(port); @@ -1085,7 +1085,7 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) /* flush and chase */ edge_port->chaseResponsePending = true; - dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__); + dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__); status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0); if (status == 0) { // block until chase finished @@ -1099,7 +1099,7 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) ((edge_serial->is_epic) && (edge_serial->epic_descriptor.Supports.IOSPClose))) { /* close the port */ - dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __FUNCTION__); + dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__); send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0); } @@ -1119,7 +1119,7 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) kfree(edge_port->txfifo.fifo); edge_port->txfifo.fifo = NULL; - dbg("%s exited", __FUNCTION__); + dbg("%s exited", __func__); } /***************************************************************************** @@ -1139,7 +1139,7 @@ static int edge_write (struct usb_serial_port *port, const unsigned char *data, int secondhalf; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return -ENODEV; @@ -1152,12 +1152,12 @@ static int edge_write (struct usb_serial_port *port, const unsigned char *data, // calculate number of bytes to put in fifo copySize = min ((unsigned int)count, (edge_port->txCredits - fifo->count)); - dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", __FUNCTION__, + dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", __func__, port->number, count, edge_port->txCredits - fifo->count, copySize); /* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */ if (copySize == 0) { - dbg("%s - copySize = Zero", __FUNCTION__); + dbg("%s - copySize = Zero", __func__); goto finish_write; } @@ -1169,11 +1169,11 @@ static int edge_write (struct usb_serial_port *port, const unsigned char *data, bytesleft = fifo->size - fifo->head; firsthalf = min (bytesleft, copySize); - dbg("%s - copy %d bytes of %d into fifo ", __FUNCTION__, firsthalf, bytesleft); + dbg("%s - copy %d bytes of %d into fifo ", __func__, firsthalf, bytesleft); /* now copy our data */ memcpy(&fifo->fifo[fifo->head], data, firsthalf); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, firsthalf, &fifo->fifo[fifo->head]); + usb_serial_debug_data(debug, &port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]); // update the index and size fifo->head += firsthalf; @@ -1187,9 +1187,9 @@ static int edge_write (struct usb_serial_port *port, const unsigned char *data, secondhalf = copySize-firsthalf; if (secondhalf) { - dbg("%s - copy rest of data %d", __FUNCTION__, secondhalf); + dbg("%s - copy rest of data %d", __func__, secondhalf); memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, secondhalf, &fifo->fifo[fifo->head]); + usb_serial_debug_data(debug, &port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]); // update the index and size fifo->count += secondhalf; fifo->head += secondhalf; @@ -1201,7 +1201,7 @@ finish_write: send_more_port_data((struct edgeport_serial *)usb_get_serial_data(port->serial), edge_port); - dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __FUNCTION__, copySize, edge_port->txCredits, fifo->count); + dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__, copySize, edge_port->txCredits, fifo->count); return copySize; } @@ -1232,14 +1232,14 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge int secondhalf; unsigned long flags; - dbg("%s(%d)", __FUNCTION__, edge_port->port->number); + dbg("%s(%d)", __func__, edge_port->port->number); spin_lock_irqsave(&edge_port->ep_lock, flags); if (edge_port->write_in_progress || !edge_port->open || (fifo->count == 0)) { - dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", __FUNCTION__, edge_port->port->number, fifo->count, edge_port->write_in_progress); + dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", __func__, edge_port->port->number, fifo->count, edge_port->write_in_progress); goto exit_send; } @@ -1251,7 +1251,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge // it's better to wait for more credits so we can do a larger // write. if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits,EDGE_FW_BULK_MAX_PACKET_SIZE)) { - dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", __FUNCTION__, edge_port->port->number, fifo->count, edge_port->txCredits ); + dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", __func__, edge_port->port->number, fifo->count, edge_port->txCredits ); goto exit_send; } @@ -1269,7 +1269,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge count = fifo->count; buffer = kmalloc (count+2, GFP_ATOMIC); if (buffer == NULL) { - dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __FUNCTION__); + dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __func__); edge_port->write_in_progress = false; goto exit_send; } @@ -1294,7 +1294,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge } if (count) - usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, count, &buffer[2]); + usb_serial_debug_data(debug, &edge_port->port->dev, __func__, count, &buffer[2]); /* fill up the urb with all of our data and submit it */ usb_fill_bulk_urb (urb, edge_serial->serial->dev, @@ -1309,14 +1309,14 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { /* something went wrong */ - dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __FUNCTION__, status); + dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __func__, status); edge_port->write_in_progress = false; /* revert the credits as something bad happened. */ edge_port->txCredits += count; edge_port->icount.tx -= count; } - dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", __FUNCTION__, count, edge_port->txCredits, fifo->count); + dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", __func__, count, edge_port->txCredits, fifo->count); exit_send: spin_unlock_irqrestore(&edge_port->ep_lock, flags); @@ -1337,17 +1337,17 @@ static int edge_write_room (struct usb_serial_port *port) int room; unsigned long flags; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (edge_port == NULL) return -ENODEV; if (edge_port->closePending) return -ENODEV; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!edge_port->open) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return -EINVAL; } @@ -1356,7 +1356,7 @@ static int edge_write_room (struct usb_serial_port *port) room = edge_port->txCredits - edge_port->txfifo.count; spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return room; } @@ -1376,7 +1376,7 @@ static int edge_chars_in_buffer (struct usb_serial_port *port) int num_chars; unsigned long flags; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (edge_port == NULL) return -ENODEV; @@ -1384,7 +1384,7 @@ static int edge_chars_in_buffer (struct usb_serial_port *port) return -ENODEV; if (!edge_port->open) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return -EINVAL; } @@ -1392,7 +1392,7 @@ static int edge_chars_in_buffer (struct usb_serial_port *port) num_chars = edge_port->maxTxCredits - edge_port->txCredits + edge_port->txfifo.count; spin_unlock_irqrestore(&edge_port->ep_lock, flags); if (num_chars) { - dbg("%s(port %d) - returns %d", __FUNCTION__, port->number, num_chars); + dbg("%s(port %d) - returns %d", __func__, port->number, num_chars); } return num_chars; @@ -1410,19 +1410,19 @@ static void edge_throttle (struct usb_serial_port *port) struct tty_struct *tty; int status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return; if (!edge_port->open) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return; } tty = port->tty; if (!tty) { - dbg ("%s - no tty available", __FUNCTION__); + dbg ("%s - no tty available", __func__); return; } @@ -1459,19 +1459,19 @@ static void edge_unthrottle (struct usb_serial_port *port) struct tty_struct *tty; int status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return; if (!edge_port->open) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return; } tty = port->tty; if (!tty) { - dbg ("%s - no tty available", __FUNCTION__); + dbg ("%s - no tty available", __func__); return; } @@ -1509,18 +1509,18 @@ static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old unsigned int cflag; cflag = tty->termios->c_cflag; - dbg("%s - clfag %08x iflag %08x", __FUNCTION__, + dbg("%s - clfag %08x iflag %08x", __func__, tty->termios->c_cflag, tty->termios->c_iflag); - dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, + dbg("%s - old clfag %08x old iflag %08x", __func__, old_termios->c_cflag, old_termios->c_iflag); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return; if (!edge_port->open) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return; } @@ -1549,7 +1549,7 @@ static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *va spin_lock_irqsave(&edge_port->ep_lock, flags); if (edge_port->maxTxCredits == edge_port->txCredits && edge_port->txfifo.count == 0) { - dbg("%s -- Empty", __FUNCTION__); + dbg("%s -- Empty", __func__); result = TIOCSER_TEMT; } spin_unlock_irqrestore(&edge_port->ep_lock, flags); @@ -1569,7 +1569,7 @@ static int get_number_bytes_avail(struct edgeport_port *edge_port, unsigned int result = tty->read_cnt; - dbg("%s(%d) = %d", __FUNCTION__, edge_port->port->number, result); + dbg("%s(%d) = %d", __func__, edge_port->port->number, result); if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; //return 0; @@ -1581,7 +1581,7 @@ static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsig struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int mcr; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); mcr = edge_port->shadowMCR; if (set & TIOCM_RTS) @@ -1612,7 +1612,7 @@ static int edge_tiocmget(struct usb_serial_port *port, struct file *file) unsigned int msr; unsigned int mcr; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); msr = edge_port->shadowMSR; mcr = edge_port->shadowMCR; @@ -1624,7 +1624,7 @@ static int edge_tiocmget(struct usb_serial_port *port, struct file *file) | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ - dbg("%s -- %x", __FUNCTION__, result); + dbg("%s -- %x", __func__, result); return result; } @@ -1670,30 +1670,30 @@ static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned struct async_icount cprev; struct serial_icounter_struct icount; - dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd); + dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); switch (cmd) { // return number of bytes available case TIOCINQ: - dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number); + dbg("%s (%d) TIOCINQ", __func__, port->number); return get_number_bytes_avail(edge_port, (unsigned int __user *) arg); break; case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number); + dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); return get_lsr_info(edge_port, (unsigned int __user *) arg); return 0; case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number); + dbg("%s (%d) TIOCGSERIAL", __func__, port->number); return get_serial_info(edge_port, (struct serial_struct __user *) arg); case TIOCSSERIAL: - dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number); + dbg("%s (%d) TIOCSSERIAL", __func__, port->number); break; case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number); + dbg("%s (%d) TIOCMIWAIT", __func__, port->number); cprev = edge_port->icount; while (1) { prepare_to_wait(&edge_port->delta_msr_wait, &wait, TASK_INTERRUPTIBLE); @@ -1732,7 +1732,7 @@ static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned icount.brk = cnow.brk; icount.buf_overrun = cnow.buf_overrun; - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, port->number, icount.rx, icount.tx ); + dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, icount.rx, icount.tx ); if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) return -EFAULT; return 0; @@ -1758,7 +1758,7 @@ static void edge_break (struct usb_serial_port *port, int break_state) /* flush and chase */ edge_port->chaseResponsePending = true; - dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__); + dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__); status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0); if (status == 0) { // block until chase finished @@ -1772,14 +1772,14 @@ static void edge_break (struct usb_serial_port *port, int break_state) ((edge_serial->is_epic) && (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) { if (break_state == -1) { - dbg("%s - Sending IOSP_CMD_SET_BREAK", __FUNCTION__); + dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__); status = send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_BREAK, 0); } else { - dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __FUNCTION__); + dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__); status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CLEAR_BREAK, 0); } if (status) { - dbg("%s - error sending break set/clear command.", __FUNCTION__); + dbg("%s - error sending break set/clear command.", __func__); } } @@ -1799,14 +1799,14 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha __u16 lastBufferLength; __u16 rxLen; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); lastBufferLength = bufferLength + 1; while (bufferLength > 0) { /* failsafe incase we get a message that we don't understand */ if (lastBufferLength == bufferLength) { - dbg("%s - stuck in loop, exiting it.", __FUNCTION__); + dbg("%s - stuck in loop, exiting it.", __func__); break; } lastBufferLength = bufferLength; @@ -1828,7 +1828,7 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha ++buffer; --bufferLength; - dbg("%s - Hdr1=%02X Hdr2=%02X", __FUNCTION__, edge_serial->rxHeader1, edge_serial->rxHeader2); + dbg("%s - Hdr1=%02X Hdr2=%02X", __func__, edge_serial->rxHeader1, edge_serial->rxHeader2); // Process depending on whether this header is // data or status @@ -1858,7 +1858,7 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1); edge_serial->rxBytesRemaining = IOSP_GET_HDR_DATA_LEN(edge_serial->rxHeader1, edge_serial->rxHeader2); - dbg("%s - Data for Port %u Len %u", __FUNCTION__, edge_serial->rxPort, edge_serial->rxBytesRemaining); + dbg("%s - Data for Port %u Len %u", __func__, edge_serial->rxPort, edge_serial->rxBytesRemaining); //ASSERT( DevExt->RxPort < DevExt->NumPorts ); //ASSERT( DevExt->RxBytesRemaining < IOSP_MAX_DATA_LENGTH ); @@ -1891,7 +1891,7 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha if (edge_port->open) { tty = edge_port->port->tty; if (tty) { - dbg("%s - Sending %d bytes to TTY for port %d", __FUNCTION__, rxLen, edge_serial->rxPort); + dbg("%s - Sending %d bytes to TTY for port %d", __func__, rxLen, edge_serial->rxPort); edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen); } edge_port->icount.rx += rxLen; @@ -1930,17 +1930,17 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 port = edge_serial->serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); if (edge_port == NULL) { - dev_err(&edge_serial->serial->dev->dev, "%s - edge_port == NULL for port %d\n", __FUNCTION__, edge_serial->rxPort); + dev_err(&edge_serial->serial->dev->dev, "%s - edge_port == NULL for port %d\n", __func__, edge_serial->rxPort); return; } - dbg("%s - port %d", __FUNCTION__, edge_serial->rxPort); + dbg("%s - port %d", __func__, edge_serial->rxPort); if (code == IOSP_EXT_STATUS) { switch (byte2) { case IOSP_EXT_STATUS_CHASE_RSP: // we want to do EXT status regardless of port open/closed - dbg("%s - Port %u EXT CHASE_RSP Data = %02x", __FUNCTION__, edge_serial->rxPort, byte3 ); + dbg("%s - Port %u EXT CHASE_RSP Data = %02x", __func__, edge_serial->rxPort, byte3 ); // Currently, the only EXT_STATUS is Chase, so process here instead of one more call // to one more subroutine. If/when more EXT_STATUS, there'll be more work to do. // Also, we currently clear flag and close the port regardless of content of above's Byte3. @@ -1951,7 +1951,7 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 return; case IOSP_EXT_STATUS_RX_CHECK_RSP: - dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __FUNCTION__, edge_serial->rxPort, byte3 ); + dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3 ); //Port->RxCheckRsp = true; return; } @@ -1960,7 +1960,7 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 if (code == IOSP_STATUS_OPEN_RSP) { edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3); edge_port->maxTxCredits = edge_port->txCredits; - dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __FUNCTION__, edge_serial->rxPort, byte2, edge_port->txCredits); + dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits); handle_new_msr (edge_port, byte2); /* send the current line settings to the port so we are in sync with any further termios calls */ @@ -1984,23 +1984,23 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 switch (code) { // Not currently sent by Edgeport case IOSP_STATUS_LSR: - dbg("%s - Port %u LSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2); + dbg("%s - Port %u LSR Status = %02x", __func__, edge_serial->rxPort, byte2); handle_new_lsr(edge_port, false, byte2, 0); break; case IOSP_STATUS_LSR_DATA: - dbg("%s - Port %u LSR Status = %02x, Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3); + dbg("%s - Port %u LSR Status = %02x, Data = %02x", __func__, edge_serial->rxPort, byte2, byte3); // byte2 is LSR Register // byte3 is broken data byte handle_new_lsr(edge_port, true, byte2, byte3); break; // // case IOSP_EXT_4_STATUS: - // dbg("%s - Port %u LSR Status = %02x Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3); + // dbg("%s - Port %u LSR Status = %02x Data = %02x", __func__, edge_serial->rxPort, byte2, byte3); // break; // case IOSP_STATUS_MSR: - dbg("%s - Port %u MSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2); + dbg("%s - Port %u MSR Status = %02x", __func__, edge_serial->rxPort, byte2); // Process this new modem status and generate appropriate // events, etc, based on the new status. This routine @@ -2009,7 +2009,7 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 break; default: - dbg("%s - Unrecognized IOSP status code %u\n", __FUNCTION__, code); + dbg("%s - Unrecognized IOSP status code %u\n", __func__, code); break; } @@ -2029,7 +2029,7 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned c cnt = tty_buffer_request_room(tty, length); if (cnt < length) { dev_err(dev, "%s - dropping data, %d bytes lost\n", - __FUNCTION__, length - cnt); + __func__, length - cnt); if(cnt == 0) break; } @@ -2050,7 +2050,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) { struct async_icount *icount; - dbg("%s %02x", __FUNCTION__, newMsr); + dbg("%s %02x", __func__, newMsr); if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { icount = &edge_port->icount; @@ -2087,7 +2087,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 l __u8 newLsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); struct async_icount *icount; - dbg("%s - %02x", __FUNCTION__, newLsr); + dbg("%s - %02x", __func__, newLsr); edge_port->shadowLSR = lsr; @@ -2136,11 +2136,11 @@ static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u __u16 current_length; unsigned char *transfer_buffer; - dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length); + dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); transfer_buffer = kmalloc (64, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64); + dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64); return -ENOMEM; } @@ -2152,7 +2152,7 @@ static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u } else { current_length = length; } -// dbg("%s - writing %x, %x, %d", __FUNCTION__, extAddr, addr, current_length); +// dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length); memcpy (transfer_buffer, data, current_length); result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_RAM, 0x40, addr, extAddr, transfer_buffer, current_length, 300); @@ -2181,11 +2181,11 @@ static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u1 __u16 current_length; unsigned char *transfer_buffer; -// dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length); +// dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); transfer_buffer = kmalloc (64, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64); + dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64); return -ENOMEM; } @@ -2197,7 +2197,7 @@ static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u1 } else { current_length = length; } -// dbg("%s - writing %x, %x, %d", __FUNCTION__, extAddr, addr, current_length); +// dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length); memcpy (transfer_buffer, data, current_length); result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_ROM, 0x40, addr, extAddr, transfer_buffer, current_length, 300); @@ -2226,11 +2226,11 @@ static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 __u16 current_length; unsigned char *transfer_buffer; - dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length); + dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); transfer_buffer = kmalloc (64, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64); + dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64); return -ENOMEM; } @@ -2242,7 +2242,7 @@ static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 } else { current_length = length; } -// dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, current_length); +// dbg("%s - %x, %x, %d", __func__, extAddr, addr, current_length); result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQUEST_ION_READ_ROM, 0xC0, addr, extAddr, transfer_buffer, current_length, 300); if (result < 0) @@ -2269,11 +2269,11 @@ static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u int length = 0; int status = 0; - dbg("%s - %d, %d", __FUNCTION__, command, param); + dbg("%s - %d, %d", __func__, command, param); buffer = kmalloc (10, GFP_ATOMIC); if (!buffer) { - dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 10); + dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 10); return -ENOMEM; } @@ -2304,7 +2304,7 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer struct urb *urb; int timeout; - usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, length, buffer); + usb_serial_debug_data(debug, &edge_port->port->dev, __func__, length, buffer); /* Allocate our next urb */ urb = usb_alloc_urb (0, GFP_ATOMIC); @@ -2312,7 +2312,7 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer return -ENOMEM; atomic_inc(&CmdUrbs); - dbg("%s - ALLOCATE URB %p (outstanding %d)", __FUNCTION__, urb, atomic_read(&CmdUrbs)); + dbg("%s - ALLOCATE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs)); usb_fill_bulk_urb (urb, edge_serial->serial->dev, usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint), @@ -2323,7 +2323,7 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer if (status) { /* something went wrong */ - dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __FUNCTION__, status); + dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __func__, status); usb_kill_urb(urb); usb_free_urb(urb); atomic_dec(&CmdUrbs); @@ -2337,7 +2337,7 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer if (edge_port->commandPending) { /* command timed out */ - dbg("%s - command timed out", __FUNCTION__); + dbg("%s - command timed out", __func__); status = -EINVAL; } #endif @@ -2367,18 +2367,18 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa return 0; } - dbg("%s - port = %d, baud = %d", __FUNCTION__, edge_port->port->number, baudRate); + dbg("%s - port = %d, baud = %d", __func__, edge_port->port->number, baudRate); status = calc_baud_rate_divisor (baudRate, &divisor); if (status) { - dev_err(&edge_port->port->dev, "%s - bad baud rate\n", __FUNCTION__); + dev_err(&edge_port->port->dev, "%s - bad baud rate\n", __func__); return status; } // Alloc memory for the string of commands. cmdBuffer = kmalloc (0x100, GFP_ATOMIC); if (!cmdBuffer) { - dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 0x100); + dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100); return -ENOMEM; } currCmd = cmdBuffer; @@ -2414,7 +2414,7 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor) __u16 custom; - dbg("%s - %d", __FUNCTION__, baudrate); + dbg("%s - %d", __func__, baudrate); for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { if ( divisor_table[i].BaudRate == baudrate ) { @@ -2432,7 +2432,7 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor) *divisor = custom; - dbg("%s - Baud %d = %d\n", __FUNCTION__, baudrate, custom); + dbg("%s - Baud %d = %d\n", __func__, baudrate, custom); return 0; } @@ -2452,7 +2452,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r unsigned long cmdLen = 0; int status; - dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __FUNCTION__, regValue); + dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPWriteMCR && @@ -2513,29 +2513,29 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi __u8 txFlow; int status; - dbg("%s - port %d", __FUNCTION__, edge_port->port->number); + dbg("%s - port %d", __func__, edge_port->port->number); if (!edge_port->open && !edge_port->openPending) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return; } tty = edge_port->port->tty; if ((!tty) || (!tty->termios)) { - dbg("%s - no tty structures", __FUNCTION__); + dbg("%s - no tty structures", __func__); return; } cflag = tty->termios->c_cflag; switch (cflag & CSIZE) { - case CS5: lData = LCR_BITS_5; mask = 0x1f; dbg("%s - data bits = 5", __FUNCTION__); break; - case CS6: lData = LCR_BITS_6; mask = 0x3f; dbg("%s - data bits = 6", __FUNCTION__); break; - case CS7: lData = LCR_BITS_7; mask = 0x7f; dbg("%s - data bits = 7", __FUNCTION__); break; + case CS5: lData = LCR_BITS_5; mask = 0x1f; dbg("%s - data bits = 5", __func__); break; + case CS6: lData = LCR_BITS_6; mask = 0x3f; dbg("%s - data bits = 6", __func__); break; + case CS7: lData = LCR_BITS_7; mask = 0x7f; dbg("%s - data bits = 7", __func__); break; default: - case CS8: lData = LCR_BITS_8; dbg("%s - data bits = 8", __FUNCTION__); break; + case CS8: lData = LCR_BITS_8; dbg("%s - data bits = 8", __func__); break; } lParity = LCR_PAR_NONE; @@ -2543,28 +2543,28 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi if (cflag & CMSPAR) { if (cflag & PARODD) { lParity = LCR_PAR_MARK; - dbg("%s - parity = mark", __FUNCTION__); + dbg("%s - parity = mark", __func__); } else { lParity = LCR_PAR_SPACE; - dbg("%s - parity = space", __FUNCTION__); + dbg("%s - parity = space", __func__); } } else if (cflag & PARODD) { lParity = LCR_PAR_ODD; - dbg("%s - parity = odd", __FUNCTION__); + dbg("%s - parity = odd", __func__); } else { lParity = LCR_PAR_EVEN; - dbg("%s - parity = even", __FUNCTION__); + dbg("%s - parity = even", __func__); } } else { - dbg("%s - parity = none", __FUNCTION__); + dbg("%s - parity = none", __func__); } if (cflag & CSTOPB) { lStop = LCR_STOP_2; - dbg("%s - stop bits = 2", __FUNCTION__); + dbg("%s - stop bits = 2", __func__); } else { lStop = LCR_STOP_1; - dbg("%s - stop bits = 1", __FUNCTION__); + dbg("%s - stop bits = 1", __func__); } /* figure out the flow control settings */ @@ -2572,9 +2572,9 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi if (cflag & CRTSCTS) { rxFlow |= IOSP_RX_FLOW_RTS; txFlow |= IOSP_TX_FLOW_CTS; - dbg("%s - RTS/CTS is enabled", __FUNCTION__); + dbg("%s - RTS/CTS is enabled", __func__); } else { - dbg("%s - RTS/CTS is disabled", __FUNCTION__); + dbg("%s - RTS/CTS is disabled", __func__); } /* if we are implementing XON/XOFF, set the start and stop character in the device */ @@ -2592,17 +2592,17 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi /* if we are implementing INBOUND XON/XOFF */ if (I_IXOFF(tty)) { rxFlow |= IOSP_RX_FLOW_XON_XOFF; - dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __FUNCTION__, start_char, stop_char); + dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char); } else { - dbg("%s - INBOUND XON/XOFF is disabled", __FUNCTION__); + dbg("%s - INBOUND XON/XOFF is disabled", __func__); } /* if we are implementing OUTBOUND XON/XOFF */ if (I_IXON(tty)) { txFlow |= IOSP_TX_FLOW_XON_XOFF; - dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __FUNCTION__, start_char, stop_char); + dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char); } else { - dbg("%s - OUTBOUND XON/XOFF is disabled", __FUNCTION__); + dbg("%s - OUTBOUND XON/XOFF is disabled", __func__); } } @@ -2645,7 +2645,7 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi baud = 9600; } - dbg("%s - baud rate = %d", __FUNCTION__, baud); + dbg("%s - baud rate = %d", __func__, baud); status = send_cmd_write_baud_rate (edge_port, baud); if (status == -1) { /* Speed change was not possible - put back the old speed */ @@ -2843,7 +2843,7 @@ static int edge_startup (struct usb_serial *serial) /* create our private serial structure */ edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); if (edge_serial == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__); + dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); return -ENOMEM; } spin_lock_init(&edge_serial->es_lock); @@ -2885,19 +2885,19 @@ static int edge_startup (struct usb_serial *serial) serial->num_ports); } - dbg("%s - time 1 %ld", __FUNCTION__, jiffies); + dbg("%s - time 1 %ld", __func__, jiffies); /* If not an EPiC device */ if (!edge_serial->is_epic) { /* now load the application firmware into this device */ load_application_firmware (edge_serial); - dbg("%s - time 2 %ld", __FUNCTION__, jiffies); + dbg("%s - time 2 %ld", __func__, jiffies); /* Check current Edgeport EEPROM and update if necessary */ update_edgeport_E2PROM (edge_serial); - dbg("%s - time 3 %ld", __FUNCTION__, jiffies); + dbg("%s - time 3 %ld", __func__, jiffies); /* set the configuration to use #1 */ // dbg("set_configuration 1"); @@ -2911,7 +2911,7 @@ static int edge_startup (struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { edge_port = kmalloc (sizeof(struct edgeport_port), GFP_KERNEL); if (edge_port == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__); + dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); for (j = 0; j < i; ++j) { kfree (usb_get_serial_port_data(serial->port[j])); usb_set_serial_port_data(serial->port[j], NULL); @@ -3017,7 +3017,7 @@ static int edge_startup (struct usb_serial *serial) * continue as long as the edgeport is connected */ response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL); if (response) - err("%s - Error %d submitting control urb", __FUNCTION__, response); + err("%s - Error %d submitting control urb", __func__, response); } return response; } @@ -3032,7 +3032,7 @@ static void edge_shutdown (struct usb_serial *serial) struct edgeport_serial *edge_serial = usb_get_serial_data(serial); int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* stop reads and writes on all ports */ for (i=0; i < serial->num_ports; ++i) { diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 856e4d9afd6f..0d412ede839a 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -290,7 +290,7 @@ static int TIReadVendorRequestSync (struct usb_device *dev, return status; if (status != size) { dbg ("%s - wanted to write %d, but only wrote %d", - __FUNCTION__, size, status); + __func__, size, status); return -ECOMM; } return 0; @@ -320,7 +320,7 @@ static int TISendVendorRequestSync (struct usb_device *dev, return status; if (status != size) { dbg ("%s - wanted to write %d, but only wrote %d", - __FUNCTION__, size, status); + __func__, size, status); return -ECOMM; } return 0; @@ -344,7 +344,7 @@ static int TIPurgeDataSync (struct usb_serial_port *port, __u16 mask) { int port_number = port->number - port->serial->minor; - dbg ("%s - port %d, mask %x", __FUNCTION__, port_number, mask); + dbg ("%s - port %d, mask %x", __func__, port_number, mask); return TIWriteCommandSync (port->serial->dev, UMPC_PURGE_PORT, @@ -369,7 +369,7 @@ static int TIReadDownloadMemory(struct usb_device *dev, int start_address, __u8 read_length; __be16 be_start_address; - dbg ("%s - @ %x for %d", __FUNCTION__, start_address, length); + dbg ("%s - @ %x for %d", __func__, start_address, length); /* Read in blocks of 64 bytes * (TI firmware can't handle more than 64 byte reads) @@ -381,7 +381,7 @@ static int TIReadDownloadMemory(struct usb_device *dev, int start_address, read_length = (__u8)length; if (read_length > 1) { - dbg ("%s - @ %x for %d", __FUNCTION__, + dbg ("%s - @ %x for %d", __func__, start_address, read_length); } be_start_address = cpu_to_be16 (start_address); @@ -393,12 +393,12 @@ static int TIReadDownloadMemory(struct usb_device *dev, int start_address, read_length); // TransferBufferLength if (status) { - dbg ("%s - ERROR %x", __FUNCTION__, status); + dbg ("%s - ERROR %x", __func__, status); return status; } if (read_length > 1) { - usb_serial_debug_data(debug, &dev->dev, __FUNCTION__, + usb_serial_debug_data(debug, &dev->dev, __func__, read_length, buffer); } @@ -434,13 +434,13 @@ static int TIReadBootMemory (struct edgeport_serial *serial, int start_address, &buffer[i], // TransferBuffer 0x01); // TransferBufferLength if (status) { - dbg ("%s - ERROR %x", __FUNCTION__, status); + dbg ("%s - ERROR %x", __func__, status); return status; } } - dbg ("%s - start_address = %x, length = %d", __FUNCTION__, start_address, length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, length, buffer); + dbg ("%s - start_address = %x, length = %d", __func__, start_address, length); + usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer); serial->TiReadI2C = 1; @@ -472,8 +472,8 @@ static int TIWriteBootMemory (struct edgeport_serial *serial, int start_address, return status; } - dbg ("%s - start_sddr = %x, length = %d", __FUNCTION__, start_address, length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, length, buffer); + dbg ("%s - start_sddr = %x, length = %d", __func__, start_address, length); + usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer); return status; } @@ -494,8 +494,8 @@ static int TIWriteDownloadI2C (struct edgeport_serial *serial, int start_address if (write_length > length) write_length = length; - dbg ("%s - BytesInFirstPage Addr = %x, length = %d", __FUNCTION__, start_address, write_length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, write_length, buffer); + dbg ("%s - BytesInFirstPage Addr = %x, length = %d", __func__, start_address, write_length); + usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer); /* Write first page */ be_start_address = cpu_to_be16 (start_address); @@ -506,7 +506,7 @@ static int TIWriteDownloadI2C (struct edgeport_serial *serial, int start_address buffer, // TransferBuffer write_length); if (status) { - dbg ("%s - ERROR %d", __FUNCTION__, status); + dbg ("%s - ERROR %d", __func__, status); return status; } @@ -521,8 +521,8 @@ static int TIWriteDownloadI2C (struct edgeport_serial *serial, int start_address else write_length = length; - dbg ("%s - Page Write Addr = %x, length = %d", __FUNCTION__, start_address, write_length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, write_length, buffer); + dbg ("%s - Page Write Addr = %x, length = %d", __func__, start_address, write_length); + usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer); /* Write next page */ be_start_address = cpu_to_be16 (start_address); @@ -533,7 +533,7 @@ static int TIWriteDownloadI2C (struct edgeport_serial *serial, int start_address buffer, // TransferBuffer write_length); // TransferBufferLength if (status) { - dev_err (&serial->serial->dev->dev, "%s - ERROR %d\n", __FUNCTION__, status); + dev_err (&serial->serial->dev->dev, "%s - ERROR %d\n", __func__, status); return status; } @@ -559,7 +559,7 @@ static int TIIsTxActive (struct edgeport_port *port) oedb = kmalloc (sizeof (* oedb), GFP_KERNEL); if (!oedb) { - dev_err (&port->port->dev, "%s - out of memory\n", __FUNCTION__); + dev_err (&port->port->dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -579,7 +579,7 @@ static int TIIsTxActive (struct edgeport_port *port) if (status) goto exit_is_tx_active; - dbg ("%s - XByteCount 0x%X", __FUNCTION__, oedb->XByteCount); + dbg ("%s - XByteCount 0x%X", __func__, oedb->XByteCount); /* and the LSR */ status = TIReadRam (port->port->serial->dev, @@ -589,7 +589,7 @@ static int TIIsTxActive (struct edgeport_port *port) if (status) goto exit_is_tx_active; - dbg ("%s - LSR = 0x%X", __FUNCTION__, *lsr); + dbg ("%s - LSR = 0x%X", __func__, *lsr); /* If either buffer has data or we are transmitting then return TRUE */ if ((oedb->XByteCount & 0x80 ) != 0 ) @@ -600,7 +600,7 @@ static int TIIsTxActive (struct edgeport_port *port) /* We return Not Active if we get any kind of error */ exit_is_tx_active: - dbg ("%s - return %d", __FUNCTION__, bytes_left ); + dbg ("%s - return %d", __func__, bytes_left ); kfree(lsr); kfree(oedb); @@ -664,11 +664,11 @@ static int TIChooseConfiguration (struct usb_device *dev) // we want. However, we just support one config at this point, // configuration # 1, which is Config Descriptor 0. - dbg ("%s - Number of Interfaces = %d", __FUNCTION__, dev->config->desc.bNumInterfaces); - dbg ("%s - MAX Power = %d", __FUNCTION__, dev->config->desc.bMaxPower*2); + dbg ("%s - Number of Interfaces = %d", __func__, dev->config->desc.bNumInterfaces); + dbg ("%s - MAX Power = %d", __func__, dev->config->desc.bMaxPower*2); if (dev->config->desc.bNumInterfaces != 1) { - dev_err (&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __FUNCTION__); + dev_err (&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__); return -ENODEV; } @@ -751,7 +751,7 @@ static int ValidChecksum(struct ti_i2c_desc *rom_desc, __u8 *buffer) cs = (__u8)(cs + buffer[i]); } if (cs != rom_desc->CheckSum) { - dbg ("%s - Mismatch %x - %x", __FUNCTION__, rom_desc->CheckSum, cs); + dbg ("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs); return -EINVAL; } return 0; @@ -769,12 +769,12 @@ static int TiValidateI2cImage (struct edgeport_serial *serial) rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL); if (!rom_desc) { - dev_err (dev, "%s - out of memory\n", __FUNCTION__); + dev_err (dev, "%s - out of memory\n", __func__); return -ENOMEM; } buffer = kmalloc (TI_MAX_I2C_SIZE, GFP_KERNEL); if (!buffer) { - dev_err (dev, "%s - out of memory when allocating buffer\n", __FUNCTION__); + dev_err (dev, "%s - out of memory when allocating buffer\n", __func__); kfree (rom_desc); return -ENOMEM; } @@ -785,7 +785,7 @@ static int TiValidateI2cImage (struct edgeport_serial *serial) goto ExitTiValidateI2cImage; if (*buffer != UMP5152 && *buffer != UMP3410) { - dev_err (dev, "%s - invalid buffer signature\n", __FUNCTION__); + dev_err (dev, "%s - invalid buffer signature\n", __func__); status = -ENODEV; goto ExitTiValidateI2cImage; } @@ -801,11 +801,11 @@ static int TiValidateI2cImage (struct edgeport_serial *serial) if ((start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size) > TI_MAX_I2C_SIZE) { status = -ENODEV; - dbg ("%s - structure too big, erroring out.", __FUNCTION__); + dbg ("%s - structure too big, erroring out.", __func__); break; } - dbg ("%s Type = 0x%x", __FUNCTION__, rom_desc->Type); + dbg ("%s Type = 0x%x", __func__, rom_desc->Type); // Skip type 2 record ttype = rom_desc->Type & 0x0f; @@ -845,13 +845,13 @@ static int TIReadManufDescriptor (struct edgeport_serial *serial, __u8 *buffer) rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL); if (!rom_desc) { - dev_err (&serial->serial->dev->dev, "%s - out of memory\n", __FUNCTION__); + dev_err (&serial->serial->dev->dev, "%s - out of memory\n", __func__); return -ENOMEM; } start_address = TIGetDescriptorAddress (serial, I2C_DESC_TYPE_ION, rom_desc); if (!start_address) { - dbg ("%s - Edge Descriptor not found in I2C", __FUNCTION__); + dbg ("%s - Edge Descriptor not found in I2C", __func__); status = -ENODEV; goto exit; } @@ -867,12 +867,12 @@ static int TIReadManufDescriptor (struct edgeport_serial *serial, __u8 *buffer) status = ValidChecksum(rom_desc, buffer); desc = (struct edge_ti_manuf_descriptor *)buffer; - dbg ( "%s - IonConfig 0x%x", __FUNCTION__, desc->IonConfig ); - dbg ( "%s - Version %d", __FUNCTION__, desc->Version ); - dbg ( "%s - Cpu/Board 0x%x", __FUNCTION__, desc->CpuRev_BoardRev ); - dbg ( "%s - NumPorts %d", __FUNCTION__, desc->NumPorts ); - dbg ( "%s - NumVirtualPorts %d", __FUNCTION__, desc->NumVirtualPorts ); - dbg ( "%s - TotalPorts %d", __FUNCTION__, desc->TotalPorts ); + dbg ( "%s - IonConfig 0x%x", __func__, desc->IonConfig ); + dbg ( "%s - Version %d", __func__, desc->Version ); + dbg ( "%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev ); + dbg ( "%s - NumPorts %d", __func__, desc->NumPorts ); + dbg ( "%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts ); + dbg ( "%s - TotalPorts %d", __func__, desc->TotalPorts ); exit: kfree (rom_desc); @@ -902,7 +902,7 @@ static int BuildI2CFirmwareHeader (__u8 *header, struct device *dev) buffer = kmalloc (buffer_size, GFP_KERNEL); if (!buffer) { - dev_err (dev, "%s - out of memory\n", __FUNCTION__); + dev_err (dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -955,11 +955,11 @@ static int TIGetI2cTypeInBootMode (struct edgeport_serial *serial) &data, // TransferBuffer 0x01); // TransferBufferLength if (status) - dbg ("%s - read 2 status error = %d", __FUNCTION__, status); + dbg ("%s - read 2 status error = %d", __func__, status); else - dbg ("%s - read 2 data = 0x%x", __FUNCTION__, data); + dbg ("%s - read 2 data = 0x%x", __func__, data); if ((!status) && (data == UMP5152 || data == UMP3410)) { - dbg ("%s - ROM_TYPE_II", __FUNCTION__); + dbg ("%s - ROM_TYPE_II", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; return 0; } @@ -972,16 +972,16 @@ static int TIGetI2cTypeInBootMode (struct edgeport_serial *serial) &data, // TransferBuffer 0x01); // TransferBufferLength if (status) - dbg ("%s - read 3 status error = %d", __FUNCTION__, status); + dbg ("%s - read 3 status error = %d", __func__, status); else - dbg ("%s - read 2 data = 0x%x", __FUNCTION__, data); + dbg ("%s - read 2 data = 0x%x", __func__, data); if ((!status) && (data == UMP5152 || data == UMP3410)) { - dbg ("%s - ROM_TYPE_III", __FUNCTION__); + dbg ("%s - ROM_TYPE_III", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III; return 0; } - dbg ("%s - Unknown", __FUNCTION__); + dbg ("%s - Unknown", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; return -ENODEV; } @@ -1063,7 +1063,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) interface = &serial->serial->interface->cur_altsetting->desc; if (!interface) { - dev_err (dev, "%s - no interface set, error!\n", __FUNCTION__); + dev_err (dev, "%s - no interface set, error!\n", __func__); return -ENODEV; } @@ -1099,7 +1099,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) */ ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL); if (!ti_manuf_desc) { - dev_err (dev, "%s - out of memory.\n", __FUNCTION__); + dev_err (dev, "%s - out of memory.\n", __func__); return -ENOMEM; } status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc); @@ -1110,7 +1110,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) // Check version number of ION descriptor if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) { - dbg ( "%s - Wrong CPU Rev %d (Must be 2)", __FUNCTION__, + dbg ( "%s - Wrong CPU Rev %d (Must be 2)", __func__, TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev)); kfree (ti_manuf_desc); return -EINVAL; @@ -1118,7 +1118,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL); if (!rom_desc) { - dev_err (dev, "%s - out of memory.\n", __FUNCTION__); + dev_err (dev, "%s - out of memory.\n", __func__); kfree (ti_manuf_desc); return -ENOMEM; } @@ -1128,11 +1128,11 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) struct ti_i2c_firmware_rec *firmware_version; __u8 record; - dbg ("%s - Found Type FIRMWARE (Type 2) record", __FUNCTION__); + dbg ("%s - Found Type FIRMWARE (Type 2) record", __func__); firmware_version = kmalloc (sizeof (*firmware_version), GFP_KERNEL); if (!firmware_version) { - dev_err (dev, "%s - out of memory.\n", __FUNCTION__); + dev_err (dev, "%s - out of memory.\n", __func__); kfree (rom_desc); kfree (ti_manuf_desc); return -ENOMEM; @@ -1158,7 +1158,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) (OperationalCodeImageVersion.MinorVersion); dbg ("%s - >>>Firmware Versions Device %d.%d Driver %d.%d", - __FUNCTION__, + __func__, firmware_version->Ver_Major, firmware_version->Ver_Minor, OperationalCodeImageVersion.MajorVersion, @@ -1167,7 +1167,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) // Check if we have an old version in the I2C and update if necessary if (download_cur_ver != download_new_ver) { dbg ("%s - Update I2C Download from %d.%d to %d.%d", - __FUNCTION__, + __func__, firmware_version->Ver_Major, firmware_version->Ver_Minor, OperationalCodeImageVersion.MajorVersion, @@ -1209,14 +1209,14 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) } if (record != I2C_DESC_TYPE_FIRMWARE_BLANK) { - dev_err (dev, "%s - error resetting device\n", __FUNCTION__); + dev_err (dev, "%s - error resetting device\n", __func__); kfree (firmware_version); kfree (rom_desc); kfree (ti_manuf_desc); return -ENODEV; } - dbg ("%s - HARDWARE RESET", __FUNCTION__); + dbg ("%s - HARDWARE RESET", __func__); // Reset UMP -- Back to BOOT MODE status = TISendVendorRequestSync (serial->serial->dev, @@ -1226,7 +1226,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) NULL, // TransferBuffer 0); // TransferBufferLength - dbg ( "%s - HARDWARE RESET return %d", __FUNCTION__, status); + dbg ( "%s - HARDWARE RESET return %d", __func__, status); /* return an error on purpose. */ kfree (firmware_version); @@ -1244,7 +1244,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) header = kmalloc (HEADER_SIZE, GFP_KERNEL); if (!header) { - dev_err (dev, "%s - out of memory.\n", __FUNCTION__); + dev_err (dev, "%s - out of memory.\n", __func__); kfree (rom_desc); kfree (ti_manuf_desc); return -ENOMEM; @@ -1252,14 +1252,14 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) vheader = kmalloc (HEADER_SIZE, GFP_KERNEL); if (!vheader) { - dev_err (dev, "%s - out of memory.\n", __FUNCTION__); + dev_err (dev, "%s - out of memory.\n", __func__); kfree (header); kfree (rom_desc); kfree (ti_manuf_desc); return -ENOMEM; } - dbg ("%s - Found Type BLANK FIRMWARE (Type F2) record", __FUNCTION__); + dbg ("%s - Found Type BLANK FIRMWARE (Type F2) record", __func__); // In order to update the I2C firmware we must change the type 2 record to type 0xF2. // This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver @@ -1297,7 +1297,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) vheader); if (status) { - dbg ("%s - can't read header back", __FUNCTION__); + dbg ("%s - can't read header back", __func__); kfree (vheader); kfree (header); kfree (rom_desc); @@ -1305,7 +1305,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) return status; } if (memcmp(vheader, header, HEADER_SIZE)) { - dbg ("%s - write download record failed", __FUNCTION__); + dbg ("%s - write download record failed", __func__); kfree (vheader); kfree (header); kfree (rom_desc); @@ -1316,7 +1316,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) kfree (vheader); kfree (header); - dbg ("%s - Start firmware update", __FUNCTION__); + dbg ("%s - Start firmware update", __func__); // Tell firmware to copy download image into I2C status = TISendVendorRequestSync (serial->serial->dev, @@ -1326,9 +1326,9 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) NULL, // TransferBuffer 0); // TransferBufferLength - dbg ("%s - Update complete 0x%x", __FUNCTION__, status); + dbg ("%s - Update complete 0x%x", __func__, status); if (status) { - dev_err (dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", __FUNCTION__); + dev_err (dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", __func__); kfree (rom_desc); kfree (ti_manuf_desc); return status; @@ -1352,7 +1352,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) return status; if (le16_to_cpu(serial->serial->dev->descriptor.idVendor) != USB_VENDOR_ID_ION) { - dbg ("%s - VID = 0x%x", __FUNCTION__, + dbg ("%s - VID = 0x%x", __func__, le16_to_cpu(serial->serial->dev->descriptor.idVendor)); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; goto StayInBootMode; @@ -1366,7 +1366,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) // Registry variable set? if (TIStayInBootMode) { - dbg ("%s - TIStayInBootMode", __FUNCTION__); + dbg ("%s - TIStayInBootMode", __func__); goto StayInBootMode; } @@ -1383,7 +1383,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) */ ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL); if (!ti_manuf_desc) { - dev_err (dev, "%s - out of memory.\n", __FUNCTION__); + dev_err (dev, "%s - out of memory.\n", __func__); return -ENOMEM; } status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc); @@ -1394,7 +1394,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) // Check for version 2 if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) { - dbg ("%s - Wrong CPU Rev %d (Must be 2)", __FUNCTION__, + dbg ("%s - Wrong CPU Rev %d (Must be 2)", __func__, TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev)); kfree (ti_manuf_desc); goto StayInBootMode; @@ -1418,7 +1418,7 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) buffer_size = (((1024 * 16) - 512) + sizeof(struct ti_i2c_image_header)); buffer = kmalloc (buffer_size, GFP_KERNEL); if (!buffer) { - dev_err (dev, "%s - out of memory\n", __FUNCTION__); + dev_err (dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -1438,20 +1438,20 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) header->CheckSum = cs; // Download the operational code - dbg ("%s - Downloading operational code image (TI UMP)", __FUNCTION__); + dbg ("%s - Downloading operational code image (TI UMP)", __func__); status = TIDownloadCodeImage (serial, buffer, buffer_size); kfree (buffer); if (status) { - dbg ("%s - Error downloading operational code image", __FUNCTION__); + dbg ("%s - Error downloading operational code image", __func__); return status; } // Device will reboot serial->product_info.TiMode = TI_MODE_TRANSITIONING; - dbg ("%s - Download successful -- Device rebooting...", __FUNCTION__); + dbg ("%s - Download successful -- Device rebooting...", __func__); /* return an error on purpose */ return -ENODEV; @@ -1470,7 +1470,7 @@ static int TISetDtr (struct edgeport_port *port) { int port_number = port->port->number - port->port->serial->minor; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); port->shadow_mcr |= MCR_DTR; return TIWriteCommandSync (port->port->serial->dev, @@ -1485,7 +1485,7 @@ static int TIClearDtr (struct edgeport_port *port) { int port_number = port->port->number - port->port->serial->minor; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); port->shadow_mcr &= ~MCR_DTR; return TIWriteCommandSync (port->port->serial->dev, @@ -1500,7 +1500,7 @@ static int TISetRts (struct edgeport_port *port) { int port_number = port->port->number - port->port->serial->minor; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); port->shadow_mcr |= MCR_RTS; return TIWriteCommandSync (port->port->serial->dev, @@ -1515,7 +1515,7 @@ static int TIClearRts (struct edgeport_port *port) { int port_number = port->port->number - port->port->serial->minor; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); port->shadow_mcr &= ~MCR_RTS; return TIWriteCommandSync (port->port->serial->dev, @@ -1530,7 +1530,7 @@ static int TISetLoopBack (struct edgeport_port *port) { int port_number = port->port->number - port->port->serial->minor; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); return TIWriteCommandSync (port->port->serial->dev, UMPC_SET_CLR_LOOPBACK, @@ -1544,7 +1544,7 @@ static int TIClearLoopBack (struct edgeport_port *port) { int port_number = port->port->number - port->port->serial->minor; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); return TIWriteCommandSync (port->port->serial->dev, UMPC_SET_CLR_LOOPBACK, @@ -1558,7 +1558,7 @@ static int TISetBreak (struct edgeport_port *port) { int port_number = port->port->number - port->port->serial->minor; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); return TIWriteCommandSync (port->port->serial->dev, UMPC_SET_CLR_BREAK, @@ -1572,7 +1572,7 @@ static int TIClearBreak (struct edgeport_port *port) { int port_number = port->port->number - port->port->serial->minor; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); return TIWriteCommandSync (port->port->serial->dev, UMPC_SET_CLR_BREAK, @@ -1586,7 +1586,7 @@ static int TIRestoreMCR (struct edgeport_port *port, __u8 mcr) { int status = 0; - dbg ("%s - %x", __FUNCTION__, mcr); + dbg ("%s - %x", __func__, mcr); if (mcr & MCR_DTR) status = TISetDtr (port); @@ -1640,7 +1640,7 @@ static void handle_new_msr (struct edgeport_port *edge_port, __u8 msr) struct async_icount *icount; struct tty_struct *tty; - dbg ("%s - %02x", __FUNCTION__, msr); + dbg ("%s - %02x", __func__, msr); if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { icount = &edge_port->icount; @@ -1679,7 +1679,7 @@ static void handle_new_lsr (struct edgeport_port *edge_port, int lsr_data, __u8 struct async_icount *icount; __u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); - dbg ("%s - %02x", __FUNCTION__, new_lsr); + dbg ("%s - %02x", __func__, new_lsr); edge_port->shadow_lsr = lsr; @@ -1722,7 +1722,7 @@ static void edge_interrupt_callback (struct urb *urb) __u8 msr; int status = urb->status; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); switch (status) { case 0: @@ -1733,34 +1733,34 @@ static void edge_interrupt_callback (struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dev_err(&urb->dev->dev, "%s - nonzero urb status received: " - "%d\n", __FUNCTION__, status); + "%d\n", __func__, status); goto exit; } if (!length) { - dbg ("%s - no data in urb", __FUNCTION__); + dbg ("%s - no data in urb", __func__); goto exit; } - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, length, data); + usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data); if (length != 2) { - dbg ("%s - expecting packet of size 2, got %d", __FUNCTION__, length); + dbg ("%s - expecting packet of size 2, got %d", __func__, length); goto exit; } port_number = TIUMP_GET_PORT_FROM_CODE (data[0]); function = TIUMP_GET_FUNC_FROM_CODE (data[0]); dbg ("%s - port_number %d, function %d, info 0x%x", - __FUNCTION__, port_number, function, data[1]); + __func__, port_number, function, data[1]); port = edge_serial->serial->port[port_number]; edge_port = usb_get_serial_port_data(port); if (!edge_port) { - dbg ("%s - edge_port not found", __FUNCTION__); + dbg ("%s - edge_port not found", __func__); return; } switch (function) { @@ -1769,12 +1769,12 @@ static void edge_interrupt_callback (struct urb *urb) if (lsr & UMP_UART_LSR_DATA_MASK) { /* Save the LSR event for bulk read completion routine */ dbg ("%s - LSR Event Port %u LSR Status = %02x", - __FUNCTION__, port_number, lsr); + __func__, port_number, lsr); edge_port->lsr_event = 1; edge_port->lsr_mask = lsr; } else { dbg ("%s - ===== Port %d LSR Status = %02x ======", - __FUNCTION__, port_number, lsr); + __func__, port_number, lsr); handle_new_lsr (edge_port, 0, lsr, 0); } break; @@ -1783,13 +1783,13 @@ static void edge_interrupt_callback (struct urb *urb) /* Copy MSR from UMP */ msr = data[1]; dbg ("%s - ===== Port %u MSR Status = %02x ======\n", - __FUNCTION__, port_number, msr); + __func__, port_number, msr); handle_new_msr (edge_port, msr); break; default: dev_err (&urb->dev->dev, "%s - Unknown Interrupt code from UMP %x\n", - __FUNCTION__, data[1]); + __func__, data[1]); break; } @@ -1798,7 +1798,7 @@ exit: retval = usb_submit_urb (urb, GFP_ATOMIC); if (retval) dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n", - __FUNCTION__, retval); + __func__, retval); } static void edge_bulk_in_callback (struct urb *urb) @@ -1810,7 +1810,7 @@ static void edge_bulk_in_callback (struct urb *urb) int port_number; int status = urb->status; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); switch (status) { case 0: @@ -1821,18 +1821,18 @@ static void edge_bulk_in_callback (struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dev_err (&urb->dev->dev,"%s - nonzero read bulk status received: %d\n", - __FUNCTION__, status); + __func__, status); } if (status == -EPIPE) goto exit; if (status) { - dev_err(&urb->dev->dev,"%s - stopping read!\n", __FUNCTION__); + dev_err(&urb->dev->dev,"%s - stopping read!\n", __func__); return; } @@ -1841,7 +1841,7 @@ static void edge_bulk_in_callback (struct urb *urb) if (edge_port->lsr_event) { edge_port->lsr_event = 0; dbg ("%s ===== Port %u LSR Status = %02x, Data = %02x ======", - __FUNCTION__, port_number, edge_port->lsr_mask, *data); + __func__, port_number, edge_port->lsr_mask, *data); handle_new_lsr (edge_port, 1, edge_port->lsr_mask, *data); /* Adjust buffer length/pointer */ --urb->actual_length; @@ -1850,10 +1850,10 @@ static void edge_bulk_in_callback (struct urb *urb) tty = edge_port->port->tty; if (tty && urb->actual_length) { - usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &edge_port->port->dev, __func__, urb->actual_length, data); if (edge_port->close_pending) { - dbg ("%s - close is pending, dropping data on the floor.", __FUNCTION__); + dbg ("%s - close is pending, dropping data on the floor.", __func__); } else { edge_tty_recv(&edge_port->port->dev, tty, data, urb->actual_length); } @@ -1872,7 +1872,7 @@ exit: spin_unlock(&edge_port->ep_lock); if (retval) dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n", - __FUNCTION__, retval); + __func__, retval); } static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length) @@ -1883,7 +1883,7 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned c cnt = tty_buffer_request_room(tty, length); if (cnt < length) { dev_err(dev, "%s - dropping data, %d bytes lost\n", - __FUNCTION__, length - cnt); + __func__, length - cnt); if(cnt == 0) break; } @@ -1901,7 +1901,7 @@ static void edge_bulk_out_callback (struct urb *urb) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status = urb->status; - dbg ("%s - port %d", __FUNCTION__, port->number); + dbg ("%s - port %d", __func__, port->number); edge_port->ep_write_urb_in_use = 0; @@ -1914,11 +1914,11 @@ static void edge_bulk_out_callback (struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dev_err(&urb->dev->dev, "%s - nonzero write bulk status " - "received: %d\n", __FUNCTION__, status); + "received: %d\n", __func__, status); } /* send any buffered data */ @@ -1936,7 +1936,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) u16 open_settings; u8 transaction_timeout; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return -ENODEV; @@ -1959,7 +1959,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) } dbg ("%s - port_number = %d, uart_base = %04x, dma_address = %04x", - __FUNCTION__, port_number, edge_port->uart_base, edge_port->dma_address); + __func__, port_number, edge_port->uart_base, edge_port->dma_address); dev = port->serial->dev; @@ -1970,7 +1970,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) status = TIClearLoopBack (edge_port); if (status) { dev_err(&port->dev,"%s - cannot send clear loopback command, %d\n", - __FUNCTION__, status); + __func__, status); return status; } @@ -1989,7 +1989,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) UMP_PIPE_TRANS_TIMEOUT_ENA | (transaction_timeout << 2)); - dbg ("%s - Sending UMPC_OPEN_PORT", __FUNCTION__); + dbg ("%s - Sending UMPC_OPEN_PORT", __func__); /* Tell TI to open and start the port */ status = TIWriteCommandSync (dev, @@ -1999,7 +1999,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) NULL, 0); if (status) { - dev_err(&port->dev,"%s - cannot send open command, %d\n", __FUNCTION__, status); + dev_err(&port->dev,"%s - cannot send open command, %d\n", __func__, status); return status; } @@ -2011,14 +2011,14 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) NULL, 0); if (status) { - dev_err(&port->dev,"%s - cannot send start DMA command, %d\n", __FUNCTION__, status); + dev_err(&port->dev,"%s - cannot send start DMA command, %d\n", __func__, status); return status; } /* Clear TX and RX buffers in UMP */ status = TIPurgeDataSync (port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN); if (status) { - dev_err(&port->dev,"%s - cannot send clear buffers command, %d\n", __FUNCTION__, status); + dev_err(&port->dev,"%s - cannot send clear buffers command, %d\n", __func__, status); return status; } @@ -2030,7 +2030,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) &edge_port->shadow_msr, // TransferBuffer 1); // TransferBufferLength if (status) { - dev_err(&port->dev,"%s - cannot send read MSR command, %d\n", __FUNCTION__, status); + dev_err(&port->dev,"%s - cannot send read MSR command, %d\n", __func__, status); return status; } @@ -2047,7 +2047,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) /* we are the first port to be opened, let's post the interrupt urb */ urb = edge_serial->serial->port[0]->interrupt_in_urb; if (!urb) { - dev_err (&port->dev, "%s - no interrupt urb present, exiting\n", __FUNCTION__); + dev_err (&port->dev, "%s - no interrupt urb present, exiting\n", __func__); status = -EINVAL; goto release_es_lock; } @@ -2056,7 +2056,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) urb->dev = dev; status = usb_submit_urb (urb, GFP_KERNEL); if (status) { - dev_err (&port->dev, "%s - usb_submit_urb failed with value %d\n", __FUNCTION__, status); + dev_err (&port->dev, "%s - usb_submit_urb failed with value %d\n", __func__, status); goto release_es_lock; } } @@ -2071,7 +2071,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) /* start up our bulk read urb */ urb = port->read_urb; if (!urb) { - dev_err (&port->dev, "%s - no read urb present, exiting\n", __FUNCTION__); + dev_err (&port->dev, "%s - no read urb present, exiting\n", __func__); status = -EINVAL; goto unlink_int_urb; } @@ -2081,13 +2081,13 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) urb->dev = dev; status = usb_submit_urb (urb, GFP_KERNEL); if (status) { - dev_err (&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __FUNCTION__, status); + dev_err (&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status); goto unlink_int_urb; } ++edge_serial->num_ports_open; - dbg("%s - exited", __FUNCTION__); + dbg("%s - exited", __func__); goto release_es_lock; @@ -2106,7 +2106,7 @@ static void edge_close (struct usb_serial_port *port, struct file *filp) int port_number; int status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); edge_serial = usb_get_serial_data(port->serial); edge_port = usb_get_serial_port_data(port); @@ -2126,7 +2126,7 @@ static void edge_close (struct usb_serial_port *port, struct file *filp) /* assuming we can still talk to the device, * send a close port command to it */ - dbg("%s - send umpc_close_port", __FUNCTION__); + dbg("%s - send umpc_close_port", __func__); port_number = port->number - port->serial->minor; status = TIWriteCommandSync (port->serial->dev, UMPC_CLOSE_PORT, @@ -2144,7 +2144,7 @@ static void edge_close (struct usb_serial_port *port, struct file *filp) mutex_unlock(&edge_serial->es_lock); edge_port->close_pending = 0; - dbg("%s - exited", __FUNCTION__); + dbg("%s - exited", __func__); } static int edge_write (struct usb_serial_port *port, const unsigned char *data, int count) @@ -2152,10 +2152,10 @@ static int edge_write (struct usb_serial_port *port, const unsigned char *data, struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (count == 0) { - dbg("%s - write request of 0 bytes", __FUNCTION__); + dbg("%s - write request of 0 bytes", __func__); return 0; } @@ -2181,7 +2181,7 @@ static void edge_send(struct usb_serial_port *port) unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&edge_port->ep_lock, flags); @@ -2203,7 +2203,7 @@ static void edge_send(struct usb_serial_port *port) spin_unlock_irqrestore(&edge_port->ep_lock, flags); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer); /* set up our urb */ usb_fill_bulk_urb (port->write_urb, port->serial->dev, @@ -2216,7 +2216,7 @@ static void edge_send(struct usb_serial_port *port) /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result); edge_port->ep_write_urb_in_use = 0; // TODO: reschedule edge_send } else { @@ -2237,7 +2237,7 @@ static int edge_write_room (struct usb_serial_port *port) int room = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return -ENODEV; @@ -2248,7 +2248,7 @@ static int edge_write_room (struct usb_serial_port *port) room = edge_buf_space_avail(edge_port->ep_out_buf); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return room; } @@ -2258,7 +2258,7 @@ static int edge_chars_in_buffer (struct usb_serial_port *port) int chars = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return -ENODEV; @@ -2269,7 +2269,7 @@ static int edge_chars_in_buffer (struct usb_serial_port *port) chars = edge_buf_data_avail(edge_port->ep_out_buf); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg ("%s - returns %d", __FUNCTION__, chars); + dbg ("%s - returns %d", __func__, chars); return chars; } @@ -2279,14 +2279,14 @@ static void edge_throttle (struct usb_serial_port *port) struct tty_struct *tty; int status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return; tty = port->tty; if (!tty) { - dbg ("%s - no tty available", __FUNCTION__); + dbg ("%s - no tty available", __func__); return; } @@ -2295,7 +2295,7 @@ static void edge_throttle (struct usb_serial_port *port) unsigned char stop_char = STOP_CHAR(tty); status = edge_write (port, &stop_char, 1); if (status <= 0) { - dev_err(&port->dev, "%s - failed to write stop character, %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status); } } @@ -2312,14 +2312,14 @@ static void edge_unthrottle (struct usb_serial_port *port) struct tty_struct *tty; int status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return; tty = port->tty; if (!tty) { - dbg ("%s - no tty available", __FUNCTION__); + dbg ("%s - no tty available", __func__); return; } @@ -2328,7 +2328,7 @@ static void edge_unthrottle (struct usb_serial_port *port) unsigned char start_char = START_CHAR(tty); status = edge_write (port, &start_char, 1); if (status <= 0) { - dev_err(&port->dev, "%s - failed to write start character, %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status); } } @@ -2337,7 +2337,7 @@ static void edge_unthrottle (struct usb_serial_port *port) if (C_CRTSCTS(tty)) { status = restart_read(edge_port); if (status) - dev_err(&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status); } } @@ -2387,13 +2387,13 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi int status; int port_number = edge_port->port->number - edge_port->port->serial->minor; - dbg("%s - port %d", __FUNCTION__, edge_port->port->number); + dbg("%s - port %d", __func__, edge_port->port->number); tty = edge_port->port->tty; config = kmalloc (sizeof (*config), GFP_KERNEL); if (!config) { - dev_err (&edge_port->port->dev, "%s - out of memory\n", __FUNCTION__); + dev_err (&edge_port->port->dev, "%s - out of memory\n", __func__); return; } @@ -2409,20 +2409,20 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi switch (cflag & CSIZE) { case CS5: config->bDataBits = UMP_UART_CHAR5BITS; - dbg ("%s - data bits = 5", __FUNCTION__); + dbg ("%s - data bits = 5", __func__); break; case CS6: config->bDataBits = UMP_UART_CHAR6BITS; - dbg ("%s - data bits = 6", __FUNCTION__); + dbg ("%s - data bits = 6", __func__); break; case CS7: config->bDataBits = UMP_UART_CHAR7BITS; - dbg ("%s - data bits = 7", __FUNCTION__); + dbg ("%s - data bits = 7", __func__); break; default: case CS8: config->bDataBits = UMP_UART_CHAR8BITS; - dbg ("%s - data bits = 8", __FUNCTION__); + dbg ("%s - data bits = 8", __func__); break; } @@ -2430,32 +2430,32 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi if (cflag & PARODD) { config->wFlags |= UMP_MASK_UART_FLAGS_PARITY; config->bParity = UMP_UART_ODDPARITY; - dbg("%s - parity = odd", __FUNCTION__); + dbg("%s - parity = odd", __func__); } else { config->wFlags |= UMP_MASK_UART_FLAGS_PARITY; config->bParity = UMP_UART_EVENPARITY; - dbg("%s - parity = even", __FUNCTION__); + dbg("%s - parity = even", __func__); } } else { config->bParity = UMP_UART_NOPARITY; - dbg("%s - parity = none", __FUNCTION__); + dbg("%s - parity = none", __func__); } if (cflag & CSTOPB) { config->bStopBits = UMP_UART_STOPBIT2; - dbg("%s - stop bits = 2", __FUNCTION__); + dbg("%s - stop bits = 2", __func__); } else { config->bStopBits = UMP_UART_STOPBIT1; - dbg("%s - stop bits = 1", __FUNCTION__); + dbg("%s - stop bits = 1", __func__); } /* figure out the flow control settings */ if (cflag & CRTSCTS) { config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW; config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW; - dbg("%s - RTS/CTS is enabled", __FUNCTION__); + dbg("%s - RTS/CTS is enabled", __func__); } else { - dbg("%s - RTS/CTS is disabled", __FUNCTION__); + dbg("%s - RTS/CTS is disabled", __func__); tty->hw_stopped = 0; restart_read(edge_port); } @@ -2469,18 +2469,18 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi if (I_IXOFF(tty)) { config->wFlags |= UMP_MASK_UART_FLAGS_IN_X; dbg ("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __FUNCTION__, config->cXon, config->cXoff); + __func__, config->cXon, config->cXoff); } else { - dbg ("%s - INBOUND XON/XOFF is disabled", __FUNCTION__); + dbg ("%s - INBOUND XON/XOFF is disabled", __func__); } /* if we are implementing OUTBOUND XON/XOFF */ if (I_IXON(tty)) { config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X; dbg ("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __FUNCTION__, config->cXon, config->cXoff); + __func__, config->cXon, config->cXoff); } else { - dbg ("%s - OUTBOUND XON/XOFF is disabled", __FUNCTION__); + dbg ("%s - OUTBOUND XON/XOFF is disabled", __func__); } } @@ -2499,7 +2499,7 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi /* FIXME: Recompute actual baud from divisor here */ - dbg ("%s - baud rate = %d, wBaudRate = %d", __FUNCTION__, baud, config->wBaudRate); + dbg ("%s - baud rate = %d, wBaudRate = %d", __func__, baud, config->wBaudRate); dbg ("wBaudRate: %d", (int)(461550L / config->wBaudRate)); dbg ("wFlags: 0x%x", config->wFlags); @@ -2522,7 +2522,7 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi sizeof(*config)); if (status) { dbg ("%s - error %d when trying to write config to device", - __FUNCTION__, status); + __func__, status); } kfree (config); @@ -2538,12 +2538,12 @@ static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old cflag = tty->termios->c_cflag; - dbg("%s - clfag %08x iflag %08x", __FUNCTION__, + dbg("%s - clfag %08x iflag %08x", __func__, tty->termios->c_cflag, tty->termios->c_iflag); - dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, + dbg("%s - old clfag %08x old iflag %08x", __func__, old_termios->c_cflag, old_termios->c_iflag); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return; @@ -2560,7 +2560,7 @@ static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsig unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&edge_port->ep_lock, flags); mcr = edge_port->shadow_mcr; @@ -2594,7 +2594,7 @@ static int edge_tiocmget(struct usb_serial_port *port, struct file *file) unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&edge_port->ep_lock, flags); @@ -2608,7 +2608,7 @@ static int edge_tiocmget(struct usb_serial_port *port, struct file *file) | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ - dbg("%s -- %x", __FUNCTION__, result); + dbg("%s -- %x", __func__, result); spin_unlock_irqrestore(&edge_port->ep_lock, flags); return result; @@ -2648,30 +2648,30 @@ static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned struct async_icount cnow; struct async_icount cprev; - dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd); + dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); switch (cmd) { case TIOCINQ: - dbg("%s - (%d) TIOCINQ", __FUNCTION__, port->number); + dbg("%s - (%d) TIOCINQ", __func__, port->number); // return get_number_bytes_avail(edge_port, (unsigned int *) arg); break; case TIOCSERGETLSR: - dbg("%s - (%d) TIOCSERGETLSR", __FUNCTION__, port->number); + dbg("%s - (%d) TIOCSERGETLSR", __func__, port->number); // return get_lsr_info(edge_port, (unsigned int *) arg); break; case TIOCGSERIAL: - dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__, port->number); + dbg("%s - (%d) TIOCGSERIAL", __func__, port->number); return get_serial_info(edge_port, (struct serial_struct __user *) arg); break; case TIOCSSERIAL: - dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__, port->number); + dbg("%s - (%d) TIOCSSERIAL", __func__, port->number); break; case TIOCMIWAIT: - dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__, port->number); + dbg("%s - (%d) TIOCMIWAIT", __func__, port->number); cprev = edge_port->icount; while (1) { interruptible_sleep_on(&edge_port->delta_msr_wait); @@ -2694,7 +2694,7 @@ static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned break; case TIOCGICOUNT: - dbg ("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, + dbg ("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, edge_port->icount.rx, edge_port->icount.tx); if (copy_to_user((void __user *)arg, &edge_port->icount, sizeof(edge_port->icount))) return -EFAULT; @@ -2709,7 +2709,7 @@ static void edge_break (struct usb_serial_port *port, int break_state) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; - dbg ("%s - state = %d", __FUNCTION__, break_state); + dbg ("%s - state = %d", __func__, break_state); /* chase the port close */ TIChasePort (edge_port, 0, 0); @@ -2721,7 +2721,7 @@ static void edge_break (struct usb_serial_port *port, int break_state) } if (status) { dbg ("%s - error %d sending break set/clear command.", - __FUNCTION__, status); + __func__, status); } } @@ -2738,7 +2738,7 @@ static int edge_startup (struct usb_serial *serial) /* create our private serial structure */ edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); if (edge_serial == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__); + dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); return -ENOMEM; } mutex_init(&edge_serial->es_lock); @@ -2755,13 +2755,13 @@ static int edge_startup (struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL); if (edge_port == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__); + dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); goto cleanup; } spin_lock_init(&edge_port->ep_lock); edge_port->ep_out_buf = edge_buf_alloc(EDGE_OUT_BUF_SIZE); if (edge_port->ep_out_buf == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__); + dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); kfree(edge_port); goto cleanup; } @@ -2790,7 +2790,7 @@ static void edge_shutdown (struct usb_serial *serial) int i; struct edgeport_port *edge_port; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); for (i = 0; i < serial->num_ports; ++i) { edge_port = usb_get_serial_port_data(serial->port[i]); @@ -2822,12 +2822,12 @@ static ssize_t store_uart_mode(struct device *dev, struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int v = simple_strtoul(valbuf, NULL, 0); - dbg("%s: setting uart_mode = %d", __FUNCTION__, v); + dbg("%s: setting uart_mode = %d", __func__, v); if (v < 256) edge_port->bUartMode = v; else - dev_err(dev, "%s - uart_mode %d is invalid\n", __FUNCTION__, v); + dev_err(dev, "%s - uart_mode %d is invalid\n", __func__, v); return count; } diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 1711dda0ea6d..c90436ea8060 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -594,13 +594,13 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) int i, result = 0; int retries = connect_retries; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); bytes_in = 0; bytes_out = 0; priv = kmalloc(sizeof(struct ipaq_private), GFP_KERNEL); if (priv == NULL) { - err("%s - Out of memory", __FUNCTION__); + err("%s - Out of memory", __func__); return -ENOMEM; } usb_set_serial_port_data(port, priv); @@ -679,7 +679,7 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) } if (!retries && result) { - err("%s - failed doing control urb, error %d", __FUNCTION__, + err("%s - failed doing control urb, error %d", __func__, result); goto error; } @@ -692,7 +692,7 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { - err("%s - failed submitting read urb, error %d", __FUNCTION__, result); + err("%s - failed submitting read urb, error %d", __func__, result); goto error; } @@ -700,7 +700,7 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) enomem: result = -ENOMEM; - err("%s - Out of memory", __FUNCTION__); + err("%s - Out of memory", __func__); error: ipaq_destroy_lists(port); kfree(priv); @@ -712,7 +712,7 @@ static void ipaq_close(struct usb_serial_port *port, struct file *filp) { struct ipaq_private *priv = usb_get_serial_port_data(port); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* * shut down bulk read and write @@ -735,15 +735,15 @@ static void ipaq_read_bulk_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); tty = port->tty; if (tty && urb->actual_length) { @@ -760,7 +760,7 @@ static void ipaq_read_bulk_callback(struct urb *urb) ipaq_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); + err("%s - failed resubmitting read urb, error %d", __func__, result); return; } @@ -771,7 +771,7 @@ static int ipaq_write(struct usb_serial_port *port, const unsigned char *buf, int bytes_sent = 0; int transfer_size; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); while (count > 0) { transfer_size = min(count, PACKET_SIZE); @@ -796,7 +796,7 @@ static int ipaq_write_bulk(struct usb_serial_port *port, const unsigned char *bu unsigned long flags; if (priv->free_len <= 0) { - dbg("%s - we're stuffed", __FUNCTION__); + dbg("%s - we're stuffed", __func__); return -EAGAIN; } @@ -808,12 +808,12 @@ static int ipaq_write_bulk(struct usb_serial_port *port, const unsigned char *bu } spin_unlock_irqrestore(&write_list_lock, flags); if (pkt == NULL) { - dbg("%s - we're stuffed", __FUNCTION__); + dbg("%s - we're stuffed", __func__); return -EAGAIN; } memcpy(pkt->data, buf, count); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, pkt->data); + usb_serial_debug_data(debug, &port->dev, __func__, count, pkt->data); pkt->len = count; pkt->written = 0; @@ -826,7 +826,7 @@ static int ipaq_write_bulk(struct usb_serial_port *port, const unsigned char *bu spin_unlock_irqrestore(&write_list_lock, flags); result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __FUNCTION__, result); + err("%s - failed submitting write urb, error %d", __func__, result); } } else { spin_unlock_irqrestore(&write_list_lock, flags); @@ -875,11 +875,11 @@ static void ipaq_write_bulk_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } @@ -889,7 +889,7 @@ static void ipaq_write_bulk_callback(struct urb *urb) spin_unlock_irqrestore(&write_list_lock, flags); result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __FUNCTION__, result); + err("%s - failed submitting write urb, error %d", __func__, result); } } else { priv->active = 0; @@ -903,7 +903,7 @@ static int ipaq_write_room(struct usb_serial_port *port) { struct ipaq_private *priv = usb_get_serial_port_data(port); - dbg("%s - freelen %d", __FUNCTION__, priv->free_len); + dbg("%s - freelen %d", __func__, priv->free_len); return priv->free_len; } @@ -911,7 +911,7 @@ static int ipaq_chars_in_buffer(struct usb_serial_port *port) { struct ipaq_private *priv = usb_get_serial_port_data(port); - dbg("%s - queuelen %d", __FUNCTION__, priv->queue_len); + dbg("%s - queuelen %d", __func__, priv->queue_len); return priv->queue_len; } @@ -933,7 +933,7 @@ static void ipaq_destroy_lists(struct usb_serial_port *port) static int ipaq_startup(struct usb_serial *serial) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (serial->dev->actconfig->desc.bConfigurationValue != 1) { err("active config #%d != 1 ??", serial->dev->actconfig->desc.bConfigurationValue); @@ -944,7 +944,7 @@ static int ipaq_startup(struct usb_serial *serial) static void ipaq_shutdown(struct usb_serial *serial) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static int __init ipaq_init(void) diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index ec0ccd14e18e..bc85ca5c1c37 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -169,15 +169,15 @@ static void ipw_read_bulk_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); tty = port->tty; if (tty && urb->actual_length) { @@ -195,7 +195,7 @@ static void ipw_read_bulk_callback(struct urb *urb) ipw_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); return; } @@ -206,7 +206,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) u8 *buf_flow_init; int result; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL); if (!buf_flow_init) @@ -217,7 +217,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) /* --1: Tell the modem to initialize (we think) From sniffs this is always the * first thing that gets sent to the modem during opening of the device */ - dbg("%s: Sending SIO_INIT (we guess)",__FUNCTION__); + dbg("%s: Sending SIO_INIT (we guess)",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev,0), IPW_SIO_INIT, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -234,7 +234,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress)); /*--2: Start reading from the device */ - dbg("%s: setting up bulk read callback",__FUNCTION__); + dbg("%s: setting up bulk read callback",__func__); usb_fill_bulk_urb(port->read_urb, dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), port->bulk_in_buffer, @@ -242,10 +242,10 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) ipw_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result < 0) - dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result); + dbg("%s - usb_submit_urb(read bulk) failed with status %d", __func__, result); /*--3: Tell the modem to open the floodgates on the rx bulk channel */ - dbg("%s:asking modem for RxRead (RXBULK_ON)",__FUNCTION__); + dbg("%s:asking modem for RxRead (RXBULK_ON)",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_RXCTL, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -258,7 +258,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result); /*--4: setup the initial flowcontrol */ - dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init); + dbg("%s:setting init flowcontrol (%s)",__func__,buf_flow_init); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_HANDFLOW, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -272,7 +272,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) /*--5: raise the dtr */ - dbg("%s:raising dtr",__FUNCTION__); + dbg("%s:raising dtr",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -285,7 +285,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) dev_err(&port->dev, "setting dtr failed (error = %d)\n", result); /*--6: raise the rts */ - dbg("%s:raising rts",__FUNCTION__); + dbg("%s:raising rts",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -307,12 +307,12 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp) int result; if (tty_hung_up_p(filp)) { - dbg("%s: tty_hung_up_p ...", __FUNCTION__); + dbg("%s: tty_hung_up_p ...", __func__); return; } /*--1: drop the dtr */ - dbg("%s:dropping dtr",__FUNCTION__); + dbg("%s:dropping dtr",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -325,7 +325,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp) dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result); /*--2: drop the rts */ - dbg("%s:dropping rts",__FUNCTION__); + dbg("%s:dropping rts",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, IPW_PIN_CLRRTS, @@ -338,7 +338,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp) /*--3: purge */ - dbg("%s:sending purge",__FUNCTION__); + dbg("%s:sending purge",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 0x03, @@ -373,13 +373,13 @@ static void ipw_write_bulk_callback(struct urb *urb) struct usb_serial_port *port = urb->context; int status = urb->status; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); port->write_urb_busy = 0; if (status) dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); usb_serial_port_softint(port); } @@ -389,18 +389,18 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int struct usb_device *dev = port->serial->dev; int ret; - dbg("%s: TOP: count=%d, in_interrupt=%ld", __FUNCTION__, + dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__, count, in_interrupt() ); if (count == 0) { - dbg("%s - write request of 0 bytes", __FUNCTION__); + dbg("%s - write request of 0 bytes", __func__); return 0; } spin_lock_bh(&port->lock); if (port->write_urb_busy) { spin_unlock_bh(&port->lock); - dbg("%s - already writing", __FUNCTION__); + dbg("%s - already writing", __func__); return 0; } port->write_urb_busy = 1; @@ -409,7 +409,7 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int count = min(count, port->bulk_out_size); memcpy(port->bulk_out_buffer, buf, count); - dbg("%s count now:%d", __FUNCTION__, count); + dbg("%s count now:%d", __func__, count); usb_fill_bulk_urb(port->write_urb, dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress), @@ -421,11 +421,11 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (ret != 0) { port->write_urb_busy = 0; - dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, ret); + dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __func__, ret); return ret; } - dbg("%s returning %d", __FUNCTION__, count); + dbg("%s returning %d", __func__, count); return count; } diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 82e12f8d600a..496009cff3a8 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -195,16 +195,16 @@ static struct irda_class_desc *irda_usb_find_class_desc(struct usb_device *dev, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, ifnum, desc, sizeof(*desc), 1000); - dbg("%s - ret=%d", __FUNCTION__, ret); + dbg("%s - ret=%d", __func__, ret); if (ret < sizeof(*desc)) { dbg("%s - class descriptor read %s (%d)", - __FUNCTION__, + __func__, (ret<0) ? "failed" : "too short", ret); goto error; } if (desc->bDescriptorType != USB_DT_IRDA) { - dbg("%s - bad class descriptor type", __FUNCTION__); + dbg("%s - bad class descriptor type", __func__); goto error; } @@ -248,7 +248,7 @@ static int ir_startup (struct usb_serial *serial) } dbg ("%s - Baud rates supported:%s%s%s%s%s%s%s%s%s", - __FUNCTION__, + __func__, (irda_desc->wBaudRate & 0x0001) ? " 2400" : "", (irda_desc->wBaudRate & 0x0002) ? " 9600" : "", (irda_desc->wBaudRate & 0x0004) ? " 19200" : "", @@ -281,13 +281,13 @@ static int ir_open (struct usb_serial_port *port, struct file *filp) char *buffer; int result = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (buffer_size) { /* override the default buffer sizes */ buffer = kmalloc (buffer_size, GFP_KERNEL); if (!buffer) { - dev_err (&port->dev, "%s - out of memory.\n", __FUNCTION__); + dev_err (&port->dev, "%s - out of memory.\n", __func__); return -ENOMEM; } kfree (port->read_urb->transfer_buffer); @@ -296,7 +296,7 @@ static int ir_open (struct usb_serial_port *port, struct file *filp) buffer = kmalloc (buffer_size, GFP_KERNEL); if (!buffer) { - dev_err (&port->dev, "%s - out of memory.\n", __FUNCTION__); + dev_err (&port->dev, "%s - out of memory.\n", __func__); return -ENOMEM; } kfree (port->write_urb->transfer_buffer); @@ -316,14 +316,14 @@ static int ir_open (struct usb_serial_port *port, struct file *filp) port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); return result; } static void ir_close (struct usb_serial_port *port, struct file * filp) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* shutdown our bulk read */ usb_kill_urb(port->read_urb); @@ -335,10 +335,10 @@ static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int int result; int transfer_size; - dbg("%s - port = %d, count = %d", __FUNCTION__, port->number, count); + dbg("%s - port = %d, count = %d", __func__, port->number, count); if (!port->tty) { - dev_err (&port->dev, "%s - no tty???\n", __FUNCTION__); + dev_err (&port->dev, "%s - no tty???\n", __func__); return 0; } @@ -348,7 +348,7 @@ static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int spin_lock_bh(&port->lock); if (port->write_urb_busy) { spin_unlock_bh(&port->lock); - dbg("%s - already writing", __FUNCTION__); + dbg("%s - already writing", __func__); return 0; } port->write_urb_busy = 1; @@ -384,7 +384,7 @@ static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int result = usb_submit_urb (port->write_urb, GFP_ATOMIC); if (result) { port->write_urb_busy = 0; - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result); } else result = transfer_size; @@ -396,19 +396,19 @@ static void ir_write_bulk_callback (struct urb *urb) struct usb_serial_port *port = (struct usb_serial_port *)urb->context; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); port->write_urb_busy = 0; if (status) { dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } usb_serial_debug_data ( debug, &port->dev, - __FUNCTION__, + __func__, urb->actual_length, urb->transfer_buffer); @@ -423,10 +423,10 @@ static void ir_read_bulk_callback (struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->open_count) { - dbg("%s - port closed.", __FUNCTION__); + dbg("%s - port closed.", __func__); return; } @@ -444,7 +444,7 @@ static void ir_read_bulk_callback (struct urb *urb) usb_serial_debug_data ( debug, &port->dev, - __FUNCTION__, + __func__, urb->actual_length, data); @@ -477,13 +477,13 @@ static void ir_read_bulk_callback (struct urb *urb) result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", - __FUNCTION__, result); + __func__, result); break ; default: dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, + __func__, status); break ; @@ -499,7 +499,7 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t speed_t baud; int ir_baud; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); baud = tty_get_baud_rate(port->tty); @@ -551,7 +551,7 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t result = usb_submit_urb (port->write_urb, GFP_KERNEL); if (result) - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result); /* Only speed changes are supported */ tty_termios_copy_hw(port->tty->termios, old_termios); diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 7fee53441c24..b486a54c6f46 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -98,10 +98,10 @@ static int iuu_alloc_buf(struct iuu_private *priv) priv->writebuf = kzalloc(256, GFP_KERNEL); if (!priv->buf || !priv->dbgbuf || !priv->writebuf) { iuu_free_buf(priv); - dbg("%s problem allocation buffer", __FUNCTION__); + dbg("%s problem allocation buffer", __func__); return -ENOMEM; } - dbg("%s - Privates buffers allocation success", __FUNCTION__); + dbg("%s - Privates buffers allocation success", __func__); return 0; } @@ -109,7 +109,7 @@ static int iuu_startup(struct usb_serial *serial) { struct iuu_private *priv; priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL); - dbg("%s- priv allocation success", __FUNCTION__); + dbg("%s- priv allocation success", __func__); if (!priv) return -ENOMEM; if (iuu_alloc_buf(priv)) { @@ -130,17 +130,17 @@ static void iuu_shutdown(struct usb_serial *serial) if (!port) return; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (priv) { iuu_free_buf(priv); - dbg("%s - I will free all", __FUNCTION__); + dbg("%s - I will free all", __func__); usb_set_serial_port_data(port, NULL); - dbg("%s - priv is not anymore in port structure", __FUNCTION__); + dbg("%s - priv is not anymore in port structure", __func__); kfree(priv); - dbg("%s priv is now kfree", __FUNCTION__); + dbg("%s priv is now kfree", __func__); } } @@ -151,7 +151,7 @@ static int iuu_tiocmset(struct usb_serial_port *port, struct file *file, unsigned long flags; /* FIXME: locking on tiomstatus */ - dbg("%s (%d) msg : SET = 0x%04x, CLEAR = 0x%04x ", __FUNCTION__, + dbg("%s (%d) msg : SET = 0x%04x, CLEAR = 0x%04x ", __func__, port->number, set, clear); spin_lock_irqsave(&priv->lock, flags); @@ -159,7 +159,7 @@ static int iuu_tiocmset(struct usb_serial_port *port, struct file *file, priv->tiostatus = TIOCM_RTS; if (!(set & TIOCM_RTS) && priv->tiostatus == TIOCM_RTS) { - dbg("%s TIOCMSET RESET called !!!", __FUNCTION__); + dbg("%s TIOCMSET RESET called !!!", __func__); priv->reset = 1; } spin_unlock_irqrestore(&priv->lock, flags); @@ -188,10 +188,10 @@ static void iuu_rxcmd(struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; int result; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); if (urb->status) { - dbg("%s - urb->status = %d", __FUNCTION__, urb->status); + dbg("%s - urb->status = %d", __func__, urb->status); /* error stop all */ return; } @@ -211,7 +211,7 @@ static int iuu_reset(struct usb_serial_port *port, u8 wt) struct iuu_private *priv = usb_get_serial_port_data(port); int result; char *buf_ptr = port->write_urb->transfer_buffer; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); /* Prepare the reset sequence */ @@ -243,16 +243,16 @@ static void iuu_update_status_callback(struct urb *urb) struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct iuu_private *priv = usb_get_serial_port_data(port); u8 *st; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); if (urb->status) { - dbg("%s - urb->status = %d", __FUNCTION__, urb->status); + dbg("%s - urb->status = %d", __func__, urb->status); /* error stop all */ return; } st = urb->transfer_buffer; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); if (urb->actual_length == 1) { switch (st[0]) { case 0x1: @@ -272,9 +272,9 @@ static void iuu_status_callback(struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; int result; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); - dbg("%s - urb->status = %d", __FUNCTION__, urb->status); + dbg("%s - urb->status = %d", __func__, urb->status); usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), @@ -287,7 +287,7 @@ static int iuu_status(struct usb_serial_port *port) { int result; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); memset(port->write_urb->transfer_buffer, IUU_GET_STATE_REGISTER, 1); usb_fill_bulk_urb(port->write_urb, port->serial->dev, @@ -306,7 +306,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) struct usb_serial *serial = port->serial; int actual = 0; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); /* send the data out the bulk port */ @@ -317,9 +317,9 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) count, &actual, HZ * 1); if (status != IUU_OPERATION_OK) { - dbg("%s - error = %2x", __FUNCTION__, status); + dbg("%s - error = %2x", __func__, status); } else { - dbg("%s - write OK !", __FUNCTION__); + dbg("%s - write OK !", __func__); } return status; } @@ -330,7 +330,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) struct usb_serial *serial = port->serial; int actual = 0; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); /* send the data out the bulk port */ @@ -341,9 +341,9 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) count, &actual, HZ * 1); if (status != IUU_OPERATION_OK) { - dbg("%s - error = %2x", __FUNCTION__, status); + dbg("%s - error = %2x", __func__, status); } else { - dbg("%s - read OK !", __FUNCTION__); + dbg("%s - read OK !", __func__); } return status; @@ -358,7 +358,7 @@ static int iuu_led(struct usb_serial_port *port, unsigned int R, if (!buf) return -ENOMEM; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); buf[0] = IUU_SET_LED; buf[1] = R & 0xFF; @@ -371,9 +371,9 @@ static int iuu_led(struct usb_serial_port *port, unsigned int R, status = bulk_immediate(port, buf, 8); kfree(buf); if (status != IUU_OPERATION_OK) - dbg("%s - led error status = %2x", __FUNCTION__, status); + dbg("%s - led error status = %2x", __func__, status); else - dbg("%s - led OK !", __FUNCTION__); + dbg("%s - led OK !", __func__); return IUU_OPERATION_OK; } @@ -451,7 +451,7 @@ static int iuu_clk(struct usb_serial_port *port, int dwFrq) unsigned int P2 = 0; int frq = (int)dwFrq; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); if (frq == 0) { priv->buf[Count++] = IUU_UART_WRITE_I2C; @@ -461,7 +461,7 @@ static int iuu_clk(struct usb_serial_port *port, int dwFrq) status = bulk_immediate(port, (u8 *) priv->buf, Count); if (status != 0) { - dbg("%s - write error ", __FUNCTION__); + dbg("%s - write error ", __func__); return status; } } else if (frq == 3579000) { @@ -570,7 +570,7 @@ static int iuu_clk(struct usb_serial_port *port, int dwFrq) status = bulk_immediate(port, (u8 *) priv->buf, Count); if (status != IUU_OPERATION_OK) - dbg("%s - write error ", __FUNCTION__); + dbg("%s - write error ", __func__); return status; } @@ -581,7 +581,7 @@ static int iuu_uart_flush(struct usb_serial_port *port) u8 rxcmd = IUU_UART_RX; struct iuu_private *priv = usb_get_serial_port_data(port); - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0) return -EIO; @@ -589,27 +589,27 @@ static int iuu_uart_flush(struct usb_serial_port *port) for (i = 0; i < 2; i++) { status = bulk_immediate(port, &rxcmd, 1); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_flush_write error", __FUNCTION__); + dbg("%s - uart_flush_write error", __func__); return status; } status = read_immediate(port, &priv->len, 1); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_flush_read error", __FUNCTION__); + dbg("%s - uart_flush_read error", __func__); return status; } if (priv->len > 0) { - dbg("%s - uart_flush datalen is : %i ", __FUNCTION__, + dbg("%s - uart_flush datalen is : %i ", __func__, priv->len); status = read_immediate(port, priv->buf, priv->len); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_flush_read error", __FUNCTION__); + dbg("%s - uart_flush_read error", __func__); return status; } } } - dbg("%s - uart_flush_read OK!", __FUNCTION__); + dbg("%s - uart_flush_read OK!", __func__); iuu_led(port, 0, 0xF000, 0, 0xFF); return status; } @@ -619,20 +619,20 @@ static void read_buf_callback(struct urb *urb) struct usb_serial_port *port = (struct usb_serial_port *)urb->context; unsigned char *data = urb->transfer_buffer; struct tty_struct *tty; - dbg("%s - urb->status = %d", __FUNCTION__, urb->status); + dbg("%s - urb->status = %d", __func__, urb->status); if (urb->status) { - dbg("%s - urb->status = %d", __FUNCTION__, urb->status); + dbg("%s - urb->status = %d", __func__, urb->status); if (urb->status == -EPROTO) { /* reschedule needed */ } return; } - dbg("%s - %i chars to write", __FUNCTION__, urb->actual_length); + dbg("%s - %i chars to write", __func__, urb->actual_length); tty = port->tty; if (data == NULL) - dbg("%s - data is NULL !!!", __FUNCTION__); + dbg("%s - data is NULL !!!", __func__); if (tty && urb->actual_length && data) { tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); @@ -647,7 +647,7 @@ static int iuu_bulk_write(struct usb_serial_port *port) int result; int i; char *buf_ptr = port->write_urb->transfer_buffer; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); *buf_ptr++ = IUU_UART_ESC; *buf_ptr++ = IUU_UART_TX; @@ -660,7 +660,7 @@ static int iuu_bulk_write(struct usb_serial_port *port) sprintf(priv->dbgbuf + i*2 , "%02X", priv->writebuf[i]); priv->dbgbuf[priv->writelen+i*2] = 0; - dbg("%s - writing %i chars : %s", __FUNCTION__, + dbg("%s - writing %i chars : %s", __func__, priv->writelen, priv->dbgbuf); } usb_fill_bulk_urb(port->write_urb, port->serial->dev, @@ -679,7 +679,7 @@ static int iuu_bulk_write(struct usb_serial_port *port) static int iuu_read_buf(struct usb_serial_port *port, int len) { int result; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, @@ -701,21 +701,21 @@ static void iuu_uart_read_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; priv->poll++; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); if (urb->status) { - dbg("%s - urb->status = %d", __FUNCTION__, urb->status); + dbg("%s - urb->status = %d", __func__, urb->status); /* error stop all */ return; } if (data == NULL) - dbg("%s - data is NULL !!!", __FUNCTION__); + dbg("%s - data is NULL !!!", __func__); if (urb->actual_length == 1 && data != NULL) len = (int) data[0]; if (urb->actual_length > 1) { - dbg("%s - urb->actual_length = %i", __FUNCTION__, + dbg("%s - urb->actual_length = %i", __func__, urb->actual_length); error = 1; return; @@ -724,7 +724,7 @@ static void iuu_uart_read_callback(struct urb *urb) if (len > 0 && error == 0) { dbg("%s - call read buf - len to read is %i ", - __FUNCTION__, len); + __func__, len); status = iuu_read_buf(port, len); return; } @@ -750,7 +750,7 @@ static void iuu_uart_read_callback(struct urb *urb) } spin_unlock_irqrestore(&priv->lock, flags); /* if nothing to write call again rxcmd */ - dbg("%s - rxcmd recall", __FUNCTION__); + dbg("%s - rxcmd recall", __func__); iuu_led_activity_off(urb); return; } @@ -760,7 +760,7 @@ static int iuu_uart_write(struct usb_serial_port *port, const u8 *buf, { struct iuu_private *priv = usb_get_serial_port_data(port); unsigned int flags; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); if (count > 256) return -ENOMEM; @@ -783,12 +783,12 @@ static void read_rxcmd_callback(struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; int result; - dbg("%s - enter", __FUNCTION__); + dbg("%s - enter", __func__); - dbg("%s - urb->status = %d", __FUNCTION__, urb->status); + dbg("%s - urb->status = %d", __func__, urb->status); if (urb->status) { - dbg("%s - urb->status = %d", __FUNCTION__, urb->status); + dbg("%s - urb->status = %d", __func__, urb->status); /* error stop all */ return; } @@ -799,7 +799,7 @@ static void read_rxcmd_callback(struct urb *urb) port->read_urb->transfer_buffer, 256, iuu_uart_read_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); - dbg("%s - submit result = %d", __FUNCTION__, result); + dbg("%s - submit result = %d", __func__, result); return; } @@ -820,13 +820,13 @@ static int iuu_uart_on(struct usb_serial_port *port) status = bulk_immediate(port, buf, 4); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_on error", __FUNCTION__); + dbg("%s - uart_on error", __func__); goto uart_enable_failed; } /* iuu_reset() the card after iuu_uart_on() */ status = iuu_uart_flush(port); if (status != IUU_OPERATION_OK) - dbg("%s - uart_flush error", __FUNCTION__); + dbg("%s - uart_flush error", __func__); uart_enable_failed: kfree(buf); return status; @@ -844,7 +844,7 @@ static int iuu_uart_off(struct usb_serial_port *port) status = bulk_immediate(port, buf, 1); if (status != IUU_OPERATION_OK) - dbg("%s - uart_off error", __FUNCTION__); + dbg("%s - uart_off error", __func__); kfree(buf); return status; @@ -938,7 +938,7 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud, status = bulk_immediate(port, dataout, DataCount); if (status != IUU_OPERATION_OK) - dbg("%s - uart_off error", __FUNCTION__); + dbg("%s - uart_off error", __func__); kfree(dataout); return status; } @@ -960,7 +960,7 @@ static void iuu_close(struct usb_serial_port *port, struct file *filp) if (!serial) return; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); iuu_uart_off(port); if (serial->dev) { @@ -977,7 +977,7 @@ static void iuu_close(struct usb_serial_port *port, struct file *filp) } /* free writebuf */ /* shutdown our urbs */ - dbg("%s - shutting down urbs", __FUNCTION__); + dbg("%s - shutting down urbs", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); @@ -998,7 +998,7 @@ static int iuu_open(struct usb_serial_port *port, struct file *filp) unsigned long flags; struct iuu_private *priv = usb_get_serial_port_data(port); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); @@ -1135,7 +1135,7 @@ static int iuu_open(struct usb_serial_port *port, struct file *filp) iuu_uart_flush(port); - dbg("%s - initialization done", __FUNCTION__); + dbg("%s - initialization done", __func__); memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1); usb_fill_bulk_urb(port->write_urb, port->serial->dev, @@ -1147,11 +1147,11 @@ static int iuu_open(struct usb_serial_port *port, struct file *filp) if (result) { dev_err(&port->dev, "%s - failed submitting read urb," - " error %d\n", __FUNCTION__, result); + " error %d\n", __func__, result); iuu_close(port, NULL); return -EPROTO; } else { - dbg("%s - rxcmd OK", __FUNCTION__); + dbg("%s - rxcmd OK", __func__); } return result; } diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index ea7bba69f4da..857c5312555a 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -244,13 +244,13 @@ module_exit(keyspan_exit); static void keyspan_rx_throttle (struct usb_serial_port *port) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); } static void keyspan_rx_unthrottle (struct usb_serial_port *port) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); } @@ -258,7 +258,7 @@ static void keyspan_break_ctl (struct usb_serial_port *port, int break_state) { struct keyspan_port_private *p_priv; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); p_priv = usb_get_serial_port_data(port); @@ -280,7 +280,7 @@ static void keyspan_set_termios (struct usb_serial_port *port, unsigned int cflag; struct tty_struct *tty = port->tty; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; @@ -377,7 +377,7 @@ static int keyspan_write(struct usb_serial_port *port, } dbg("%s - for port %d (%d chars), flip=%d", - __FUNCTION__, port->number, count, p_priv->out_flip); + __func__, port->number, count, p_priv->out_flip); for (left = count; left > 0; left -= todo) { todo = left; @@ -389,11 +389,11 @@ static int keyspan_write(struct usb_serial_port *port, /* Check we have a valid urb/endpoint before we use it... */ if ((this_urb = p_priv->out_urbs[flip]) == NULL) { /* no bulk out, so return 0 bytes written */ - dbg("%s - no output urb :(", __FUNCTION__); + dbg("%s - no output urb :(", __func__); return count; } - dbg("%s - endpoint %d flip %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), flip); + dbg("%s - endpoint %d flip %d", __func__, usb_pipeendpoint(this_urb->pipe), flip); if (this_urb->status == -EINPROGRESS) { if (time_before(jiffies, p_priv->tx_start_time[flip] + 10 * HZ)) @@ -435,13 +435,13 @@ static void usa26_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); endpoint = usb_pipeendpoint(urb->pipe); if (status) { dbg("%s - nonzero status: %x on endpoint %d.", - __FUNCTION__, status, endpoint); + __func__, status, endpoint); return; } @@ -459,7 +459,7 @@ static void usa26_indat_callback(struct urb *urb) } } else { /* some bytes had errors, every byte has status */ - dbg("%s - RX error!!!!", __FUNCTION__); + dbg("%s - RX error!!!!", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { int stat = data[i], flag = 0; if (stat & RXERROR_OVERRUN) @@ -479,7 +479,7 @@ static void usa26_indat_callback(struct urb *urb) urb->dev = port->serial->dev; if (port->open_count) if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } return; } @@ -492,7 +492,7 @@ static void usa2x_outdat_callback(struct urb *urb) port = (struct usb_serial_port *) urb->context; p_priv = usb_get_serial_port_data(port); - dbg ("%s - urb %d", __FUNCTION__, urb == p_priv->out_urbs[1]); + dbg ("%s - urb %d", __func__, urb == p_priv->out_urbs[1]); if (port->open_count) usb_serial_port_softint(port); @@ -500,7 +500,7 @@ static void usa2x_outdat_callback(struct urb *urb) static void usa26_inack_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } @@ -513,7 +513,7 @@ static void usa26_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __FUNCTION__); + dbg ("%s - sending setup", __func__); keyspan_usa26_send_setup(port->serial, port, p_priv->resend_cont - 1); } } @@ -531,11 +531,11 @@ static void usa26_instat_callback(struct urb *urb) serial = (struct usb_serial *) urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } if (urb->actual_length != 9) { - dbg("%s - %d byte report??", __FUNCTION__, urb->actual_length); + dbg("%s - %d byte report??", __func__, urb->actual_length); goto exit; } @@ -543,7 +543,7 @@ static void usa26_instat_callback(struct urb *urb) #if 0 dbg("%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d", - __FUNCTION__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff, + __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff, msg->_txXoff, msg->rxEnabled, msg->controlResponse); #endif @@ -552,7 +552,7 @@ static void usa26_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port); + dbg ("%s - Unexpected port number %d", __func__, msg->port); goto exit; } port = serial->port[msg->port]; @@ -576,14 +576,14 @@ static void usa26_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = serial->dev; if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } exit: ; } static void usa26_glocont_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } @@ -597,7 +597,7 @@ static void usa28_indat_callback(struct urb *urb) struct keyspan_port_private *p_priv; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); port = (struct usb_serial_port *) urb->context; p_priv = usb_get_serial_port_data(port); @@ -609,7 +609,7 @@ static void usa28_indat_callback(struct urb *urb) do { if (status) { dbg("%s - nonzero status: %x on endpoint %d.", - __FUNCTION__, status, usb_pipeendpoint(urb->pipe)); + __func__, status, usb_pipeendpoint(urb->pipe)); return; } @@ -629,7 +629,7 @@ static void usa28_indat_callback(struct urb *urb) urb->dev = port->serial->dev; if (port->open_count) if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } p_priv->in_flip ^= 1; @@ -639,7 +639,7 @@ static void usa28_indat_callback(struct urb *urb) static void usa28_inack_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } static void usa28_outcont_callback(struct urb *urb) @@ -651,7 +651,7 @@ static void usa28_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __FUNCTION__); + dbg ("%s - sending setup", __func__); keyspan_usa28_send_setup(port->serial, port, p_priv->resend_cont - 1); } } @@ -670,16 +670,16 @@ static void usa28_instat_callback(struct urb *urb) serial = (struct usb_serial *) urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) { - dbg("%s - bad length %d", __FUNCTION__, urb->actual_length); + dbg("%s - bad length %d", __func__, urb->actual_length); goto exit; } - /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __FUNCTION__ + /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__ data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7], data[8], data[9], data[10], data[11]);*/ @@ -689,7 +689,7 @@ static void usa28_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port); + dbg ("%s - Unexpected port number %d", __func__, msg->port); goto exit; } port = serial->port[msg->port]; @@ -713,14 +713,14 @@ static void usa28_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = serial->dev; if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } exit: ; } static void usa28_glocont_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } @@ -731,7 +731,7 @@ static void usa49_glocont_callback(struct urb *urb) struct keyspan_port_private *p_priv; int i; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); serial = (struct usb_serial *) urb->context; for (i = 0; i < serial->num_ports; ++i) { @@ -739,7 +739,7 @@ static void usa49_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __FUNCTION__); + dbg ("%s - sending setup", __func__); keyspan_usa49_send_setup(serial, port, p_priv->resend_cont - 1); break; } @@ -759,21 +759,21 @@ static void usa49_instat_callback(struct urb *urb) int old_dcd_state; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); serial = (struct usb_serial *) urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa49_portStatusMessage)) { - dbg("%s - bad length %d", __FUNCTION__, urb->actual_length); + dbg("%s - bad length %d", __func__, urb->actual_length); goto exit; } - /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __FUNCTION__, + /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__, data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7], data[8], data[9], data[10]);*/ @@ -782,7 +782,7 @@ static void usa49_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->portNumber >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->portNumber); + dbg ("%s - Unexpected port number %d", __func__, msg->portNumber); goto exit; } port = serial->port[msg->portNumber]; @@ -807,14 +807,14 @@ static void usa49_instat_callback(struct urb *urb) urb->dev = serial->dev; if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } exit: ; } static void usa49_inack_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } static void usa49_indat_callback(struct urb *urb) @@ -826,12 +826,12 @@ static void usa49_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", __FUNCTION__, + dbg("%s - nonzero status: %x on endpoint %d.", __func__, status, endpoint); return; } @@ -866,7 +866,7 @@ static void usa49_indat_callback(struct urb *urb) urb->dev = port->serial->dev; if (port->open_count) if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } } @@ -879,12 +879,12 @@ static void usa49wg_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } @@ -898,7 +898,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* Check port number from message*/ if (data[i] >= serial->num_ports) { dbg ("%s - Unexpected port number %d", - __FUNCTION__, data[i]); + __func__, data[i]); return; } port = serial->port[data[i++]]; @@ -944,13 +944,13 @@ static void usa49wg_indat_callback(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } /* not used, usa-49 doesn't have per-port control endpoints */ static void usa49_outcont_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } static void usa90_indat_callback(struct urb *urb) @@ -963,13 +963,13 @@ static void usa90_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); endpoint = usb_pipeendpoint(urb->pipe); if (status) { dbg("%s - nonzero status: %x on endpoint %d.", - __FUNCTION__, status, endpoint); + __func__, status, endpoint); return; } @@ -1000,7 +1000,7 @@ static void usa90_indat_callback(struct urb *urb) } else { /* some bytes had errors, every byte has status */ - dbg("%s - RX error!!!!", __FUNCTION__); + dbg("%s - RX error!!!!", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { int stat = data[i], flag = 0; if (stat & RXERROR_OVERRUN) @@ -1021,7 +1021,7 @@ static void usa90_indat_callback(struct urb *urb) urb->dev = port->serial->dev; if (port->open_count) if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } return; } @@ -1040,11 +1040,11 @@ static void usa90_instat_callback(struct urb *urb) serial = (struct usb_serial *) urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } if (urb->actual_length < 14) { - dbg("%s - %d byte report??", __FUNCTION__, urb->actual_length); + dbg("%s - %d byte report??", __func__, urb->actual_length); goto exit; } @@ -1073,7 +1073,7 @@ static void usa90_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = serial->dev; if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } exit: ; @@ -1088,7 +1088,7 @@ static void usa90_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __FUNCTION__); + dbg ("%s - sending setup", __func__); keyspan_usa90_send_setup(port->serial, port, p_priv->resend_cont - 1); } } @@ -1105,17 +1105,17 @@ static void usa67_instat_callback(struct urb *urb) int old_dcd_state; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) { - dbg("%s - bad length %d", __FUNCTION__, urb->actual_length); + dbg("%s - bad length %d", __func__, urb->actual_length); return; } @@ -1125,7 +1125,7 @@ static void usa67_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port); + dbg ("%s - Unexpected port number %d", __func__, msg->port); return; } @@ -1149,7 +1149,7 @@ static void usa67_instat_callback(struct urb *urb) urb->dev = serial->dev; err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } static void usa67_glocont_callback(struct urb *urb) @@ -1159,7 +1159,7 @@ static void usa67_glocont_callback(struct urb *urb) struct keyspan_port_private *p_priv; int i; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); serial = urb->context; for (i = 0; i < serial->num_ports; ++i) { @@ -1167,7 +1167,7 @@ static void usa67_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __FUNCTION__); + dbg ("%s - sending setup", __func__); keyspan_usa67_send_setup(serial, port, p_priv->resend_cont - 1); break; @@ -1183,7 +1183,7 @@ static int keyspan_write_room (struct usb_serial_port *port) int data_len; struct urb *this_urb; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; @@ -1228,7 +1228,7 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp) p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; - dbg("%s - port%d.", __FUNCTION__, port->number); + dbg("%s - port%d.", __func__, port->number); /* Set some sane defaults */ p_priv->rts_state = 1; @@ -1253,7 +1253,7 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp) usb_clear_halt(urb->dev, urb->pipe); if ((err = usb_submit_urb(urb, GFP_KERNEL)) != 0) { - dbg("%s - submit urb %d failed (%d)", __FUNCTION__, i, err); + dbg("%s - submit urb %d failed (%d)", __func__, i, err); } } @@ -1305,7 +1305,7 @@ static void keyspan_close(struct usb_serial_port *port, struct file *filp) struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1320,7 +1320,7 @@ static void keyspan_close(struct usb_serial_port *port, struct file *filp) } /*while (p_priv->outcont_urb->status == -EINPROGRESS) { - dbg("%s - urb in progress", __FUNCTION__); + dbg("%s - urb in progress", __func__); }*/ p_priv->out_flip = 0; @@ -1484,10 +1484,10 @@ static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint, if (endpoint == -1) return NULL; /* endpoint not needed */ - dbg ("%s - alloc for endpoint %d.", __FUNCTION__, endpoint); + dbg ("%s - alloc for endpoint %d.", __func__, endpoint); urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { - dbg ("%s - alloc for endpoint %d failed.", __FUNCTION__, endpoint); + dbg ("%s - alloc for endpoint %d failed.", __func__, endpoint); return NULL; } @@ -1588,7 +1588,7 @@ static void keyspan_setup_urbs(struct usb_serial *serial) struct callbacks *cback; int endp; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); d_details = s_priv->device_details; @@ -1662,7 +1662,7 @@ static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - dbg ("%s - %d.", __FUNCTION__, baud_rate); + dbg ("%s - %d.", __func__, baud_rate); /* prevent divide by zero... */ if( (b16 = (baud_rate * 16L)) == 0) { @@ -1695,7 +1695,7 @@ static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_hi = (u8) ((cnt >> 8) & 0xff); } if (rate_low && rate_hi) { - dbg ("%s - %d %02x %02x.", __FUNCTION__, baud_rate, *rate_hi, *rate_low); + dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low); } return (KEYSPAN_BAUD_RATE_OK); @@ -1708,7 +1708,7 @@ static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, u32 b16, /* baud rate times 16 (actual rate used internally) */ div; /* divisor */ - dbg ("%s - %d.", __FUNCTION__, baud_rate); + dbg ("%s - %d.", __func__, baud_rate); /* prevent divide by zero... */ if( (b16 = (baud_rate * 16L)) == 0) @@ -1731,7 +1731,7 @@ static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_hi = (u8) ((div >> 8) & 0xff); if (rate_low && rate_hi) - dbg ("%s - %d %02x %02x.", __FUNCTION__, baud_rate, *rate_hi, *rate_low); + dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low); return (KEYSPAN_BAUD_RATE_OK); } @@ -1748,7 +1748,7 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 best_prescaler; int i; - dbg ("%s - %d.", __FUNCTION__, baud_rate); + dbg ("%s - %d.", __func__, baud_rate); /* prevent divide by zero */ if( (b16 = baud_rate * 16L) == 0) { @@ -1796,7 +1796,7 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, } if (prescaler) { *prescaler = best_prescaler; - /* dbg("%s - %d %d", __FUNCTION__, *prescaler, div); */ + /* dbg("%s - %d %d", __func__, *prescaler, div); */ } return (KEYSPAN_BAUD_RATE_OK); } @@ -1809,7 +1809,7 @@ static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - dbg ("%s - %d.", __FUNCTION__, baud_rate); + dbg ("%s - %d.", __func__, baud_rate); /* prevent divide by zero */ if ((b16 = baud_rate * 16L) == 0) @@ -1848,7 +1848,7 @@ static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, if (rate_hi) { *rate_hi = (u8) ((cnt >> 8) & 0xff); } - dbg ("%s - %d OK.", __FUNCTION__, baud_rate); + dbg ("%s - %d OK.", __func__, baud_rate); return (KEYSPAN_BAUD_RATE_OK); } @@ -1864,7 +1864,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct urb *this_urb; int device_port, err; - dbg ("%s reset=%d", __FUNCTION__, reset_port); + dbg ("%s reset=%d", __func__, reset_port); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1874,11 +1874,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, outcont_urb = d_details->outcont_endpoints[port->number]; this_urb = p_priv->outcont_urb; - dbg("%s - endpoint %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe)); + dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe)); /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb.", __FUNCTION__); + dbg("%s - oops no urb.", __func__); return -1; } @@ -1887,7 +1887,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg ("%s - already writing", __FUNCTION__); */ + /* dbg ("%s - already writing", __func__); */ mdelay(5); return(-1); } @@ -1901,7 +1901,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__, + dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ @@ -1996,11 +1996,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, this_urb->dev = serial->dev; if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { - dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err); + dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); } #if 0 else { - dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __FUNCTION__ + dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__ outcont_urb, this_urb->transfer_buffer_length, usb_pipeendpoint(this_urb->pipe)); } @@ -2020,7 +2020,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, struct urb *this_urb; int device_port, err; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -2029,7 +2029,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, /* only do something if we have a bulk out endpoint */ if ((this_urb = p_priv->outcont_urb) == NULL) { - dbg("%s - oops no urb.", __FUNCTION__); + dbg("%s - oops no urb.", __func__); return -1; } @@ -2038,7 +2038,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg ("%s already writing", __FUNCTION__); + dbg ("%s already writing", __func__); mdelay(5); return(-1); } @@ -2048,7 +2048,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, msg.setBaudRate = 1; if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate requested %d.", __FUNCTION__, p_priv->baud); + dbg("%s - Invalid baud rate requested %d.", __func__, p_priv->baud); msg.baudLo = 0xff; msg.baudHi = 0xb2; /* Values for 9600 baud */ } @@ -2122,11 +2122,11 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, this_urb->dev = serial->dev; if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { - dbg("%s - usb_submit_urb(setup) failed", __FUNCTION__); + dbg("%s - usb_submit_urb(setup) failed", __func__); } #if 0 else { - dbg("%s - usb_submit_urb(setup) OK %d bytes", __FUNCTION__, + dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__, this_urb->transfer_buffer_length); } #endif @@ -2146,7 +2146,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, struct urb *this_urb; int err, device_port; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -2157,11 +2157,11 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, /* Work out which port within the device is being setup */ device_port = port->number - port->serial->minor; - dbg("%s - endpoint %d port %d (%d)",__FUNCTION__, usb_pipeendpoint(this_urb->pipe), port->number, device_port); + dbg("%s - endpoint %d port %d (%d)",__func__, usb_pipeendpoint(this_urb->pipe), port->number, device_port); /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb for port %d.", __FUNCTION__, port->number); + dbg("%s - oops no urb for port %d.", __func__, port->number); return -1; } @@ -2171,7 +2171,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg ("%s - already writing", __FUNCTION__); */ + /* dbg ("%s - already writing", __func__); */ mdelay(5); return(-1); } @@ -2188,7 +2188,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__, + dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ @@ -2307,11 +2307,11 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, this_urb->dev = serial->dev; } if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { - dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err); + dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); } #if 0 else { - dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __FUNCTION__, + dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__, outcont_urb, this_urb->transfer_buffer_length, usb_pipeendpoint(this_urb->pipe)); } @@ -2332,7 +2332,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, int err; u8 prescaler; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -2340,7 +2340,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, /* only do something if we have a bulk out endpoint */ if ((this_urb = p_priv->outcont_urb) == NULL) { - dbg("%s - oops no urb.", __FUNCTION__); + dbg("%s - oops no urb.", __func__); return -1; } @@ -2349,7 +2349,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg ("%s already writing", __FUNCTION__); + dbg ("%s already writing", __func__); mdelay(5); return(-1); } @@ -2363,7 +2363,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__, + dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, p_priv->baud); p_priv->baud = 9600; d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, @@ -2453,7 +2453,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, this_urb->dev = serial->dev; if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { - dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err); + dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); } return (0); } @@ -2469,7 +2469,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, struct urb *this_urb; int err, device_port; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -2482,7 +2482,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb for port %d.", __FUNCTION__, + dbg("%s - oops no urb for port %d.", __func__, port->number); return -1; } @@ -2492,7 +2492,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg ("%s - already writing", __FUNCTION__); */ + /* dbg ("%s - already writing", __func__); */ mdelay(5); return(-1); } @@ -2508,7 +2508,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__, + dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ @@ -2601,7 +2601,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, + dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); return (0); } @@ -2612,7 +2612,7 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) struct keyspan_serial_private *s_priv; const struct keyspan_device_details *d_details; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); d_details = s_priv->device_details; @@ -2647,20 +2647,20 @@ static int keyspan_startup (struct usb_serial *serial) struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i) if (d_details->product_id == le16_to_cpu(serial->dev->descriptor.idProduct)) break; if (d_details == NULL) { - dev_err(&serial->dev->dev, "%s - unknown product id %x\n", __FUNCTION__, le16_to_cpu(serial->dev->descriptor.idProduct)); + dev_err(&serial->dev->dev, "%s - unknown product id %x\n", __func__, le16_to_cpu(serial->dev->descriptor.idProduct)); return 1; } /* Setup private data for serial driver */ s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL); if (!s_priv) { - dbg("%s - kmalloc for keyspan_serial_private failed.", __FUNCTION__); + dbg("%s - kmalloc for keyspan_serial_private failed.", __func__); return -ENOMEM; } @@ -2672,7 +2672,7 @@ static int keyspan_startup (struct usb_serial *serial) port = serial->port[i]; p_priv = kzalloc(sizeof(struct keyspan_port_private), GFP_KERNEL); if (!p_priv) { - dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __FUNCTION__, i); + dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i); return (1); } p_priv->device_details = d_details; @@ -2685,14 +2685,14 @@ static int keyspan_startup (struct usb_serial *serial) s_priv->instat_urb->dev = serial->dev; err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit instat urb failed %d", __FUNCTION__, + dbg("%s - submit instat urb failed %d", __func__, err); } if (s_priv->indat_urb != NULL) { s_priv->indat_urb->dev = serial->dev; err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit indat urb failed %d", __FUNCTION__, + dbg("%s - submit indat urb failed %d", __func__, err); } @@ -2706,7 +2706,7 @@ static void keyspan_shutdown (struct usb_serial *serial) struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); s_priv = usb_get_serial_data(serial); diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 039847795185..6ce292ef1c47 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -208,7 +208,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work) 2000); if (result < 0) dbg("%s - error %d from usb_control_msg", - __FUNCTION__, result); + __func__, result); } @@ -232,11 +232,11 @@ static void keyspan_pda_rx_interrupt (struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dbg("%s - nonzero urb status received: %d", - __FUNCTION__, status); + __func__, status); goto exit; } @@ -274,7 +274,7 @@ exit: retval = usb_submit_urb (urb, GFP_ATOMIC); if (retval) err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); + __func__, retval); } @@ -358,7 +358,7 @@ static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state value, 0, NULL, 0, 2000); if (result < 0) dbg("%s - error %d from usb_control_msg", - __FUNCTION__, result); + __func__, result); /* there is something funky about this.. the TCSBRK that 'cu' performs ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4 seconds apart, but it feels like the break sent isn't as long as it @@ -665,11 +665,11 @@ static int keyspan_pda_open (struct usb_serial_port *port, struct file *filp) 1, 2000); if (rc < 0) { - dbg("%s - roomquery failed", __FUNCTION__); + dbg("%s - roomquery failed", __func__); goto error; } if (rc == 0) { - dbg("%s - roomquery returned 0 bytes", __FUNCTION__); + dbg("%s - roomquery returned 0 bytes", __func__); rc = -EIO; goto error; } @@ -688,7 +688,7 @@ static int keyspan_pda_open (struct usb_serial_port *port, struct file *filp) port->interrupt_in_urb->dev = serial->dev; rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (rc) { - dbg("%s - usb_submit_urb(read int) failed", __FUNCTION__); + dbg("%s - usb_submit_urb(read int) failed", __func__); goto error; } @@ -732,7 +732,7 @@ static int keyspan_pda_fake_startup (struct usb_serial *serial) record = &xircom_pgs_firmware[0]; #endif if (record == NULL) { - err("%s: unknown vendor, aborting.", __FUNCTION__); + err("%s: unknown vendor, aborting.", __func__); return -ENODEV; } @@ -779,7 +779,7 @@ static int keyspan_pda_startup (struct usb_serial *serial) static void keyspan_pda_shutdown (struct usb_serial *serial) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); kfree(usb_get_serial_port_data(serial->port[0])); } diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index d71004283904..160e19263e25 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -191,7 +191,7 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port, if (rc < 0) err("Change port settings failed (error = %d)", rc); info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d", - __FUNCTION__, + __func__, settings->pktlen, settings->baudrate, settings->databits, settings->unknown1, settings->unknown2); @@ -222,7 +222,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1,-1}; __u16 status; - info("%s - sending SIO Poll request", __FUNCTION__); + info("%s - sending SIO Poll request", __func__); rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), KL5KUSB105A_SIO_POLL, @@ -237,7 +237,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, else { status = le16_to_cpu(*(u16 *)status_buf); - info("%s - read status %x %x", __FUNCTION__, + info("%s - read status %x %x", __func__, status_buf[0], status_buf[1]); *line_state_p = klsi_105_status2linestate(status); @@ -265,7 +265,7 @@ static int klsi_105_startup (struct usb_serial *serial) priv = kmalloc(sizeof(struct klsi_105_private), GFP_KERNEL); if (!priv) { - dbg("%skmalloc for klsi_105_private failed.", __FUNCTION__); + dbg("%skmalloc for klsi_105_private failed.", __func__); i--; goto err_cleanup; } @@ -295,7 +295,7 @@ static int klsi_105_startup (struct usb_serial *serial) urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { - err("%s - out of memory for urb buffers.", __FUNCTION__); + err("%s - out of memory for urb buffers.", __func__); goto err_cleanup; } } @@ -325,7 +325,7 @@ static void klsi_105_shutdown (struct usb_serial *serial) { int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* stop reads and writes on all ports */ for (i=0; i < serial->num_ports; ++i) { @@ -370,7 +370,7 @@ static int klsi_105_open (struct usb_serial_port *port, struct file *filp) struct klsi_105_port_settings cfg; unsigned long flags; - dbg("%s port %d", __FUNCTION__, port->number); + dbg("%s port %d", __func__, port->number); /* force low_latency on so that our tty_push actually forces * the data through @@ -416,7 +416,7 @@ static int klsi_105_open (struct usb_serial_port *port, struct file *filp) rc = usb_submit_urb(port->read_urb, GFP_KERNEL); if (rc) { - err("%s - failed submitting read urb, error %d", __FUNCTION__, rc); + err("%s - failed submitting read urb, error %d", __func__, rc); retval = rc; goto exit; } @@ -434,14 +434,14 @@ static int klsi_105_open (struct usb_serial_port *port, struct file *filp) err("Enabling read failed (error = %d)", rc); retval = rc; } else - dbg("%s - enabled reading", __FUNCTION__); + dbg("%s - enabled reading", __func__); rc = klsi_105_get_line_state(port, &line_state); if (rc >= 0) { spin_lock_irqsave (&priv->lock, flags); priv->line_state = line_state; spin_unlock_irqrestore (&priv->lock, flags); - dbg("%s - read line state 0x%lx", __FUNCTION__, line_state); + dbg("%s - read line state 0x%lx", __func__, line_state); retval = 0; } else retval = rc; @@ -456,7 +456,7 @@ static void klsi_105_close (struct usb_serial_port *port, struct file *filp) struct klsi_105_private *priv = usb_get_serial_port_data(port); int rc; - dbg("%s port %d", __FUNCTION__, port->number); + dbg("%s port %d", __func__, port->number); mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) { @@ -499,7 +499,7 @@ static int klsi_105_write (struct usb_serial_port *port, int result, size; int bytes_sent=0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); while (count > 0) { /* try to find a free urb (write 0 bytes if none) */ @@ -511,21 +511,21 @@ static int klsi_105_write (struct usb_serial_port *port, for (i=0; iwrite_urb_pool[i]->status != -EINPROGRESS) { urb = priv->write_urb_pool[i]; - dbg("%s - using pool URB %d", __FUNCTION__, i); + dbg("%s - using pool URB %d", __func__, i); break; } } spin_unlock_irqrestore (&priv->lock, flags); if (urb==NULL) { - dbg("%s - no more free urbs", __FUNCTION__); + dbg("%s - no more free urbs", __func__); goto exit; } if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); if (urb->transfer_buffer == NULL) { - err("%s - no more kernel memory...", __FUNCTION__); + err("%s - no more kernel memory...", __func__); goto exit; } } @@ -551,7 +551,7 @@ static int klsi_105_write (struct usb_serial_port *port, /* send the data out the bulk port */ result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __FUNCTION__, result); + err("%s - failed submitting write urb, error %d", __func__, result); goto exit; } buf += size; @@ -570,10 +570,10 @@ static void klsi_105_write_bulk_callback ( struct urb *urb) struct usb_serial_port *port = (struct usb_serial_port *)urb->context; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { - dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, + dbg("%s - nonzero write bulk status received: %d", __func__, status); return; } @@ -600,7 +600,7 @@ static int klsi_105_chars_in_buffer (struct usb_serial_port *port) spin_unlock_irqrestore (&priv->lock, flags); - dbg("%s - returns %d", __FUNCTION__, chars); + dbg("%s - returns %d", __func__, chars); return (chars); } @@ -620,7 +620,7 @@ static int klsi_105_write_room (struct usb_serial_port *port) spin_unlock_irqrestore (&priv->lock, flags); - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return (room); } @@ -635,11 +635,11 @@ static void klsi_105_read_bulk_callback (struct urb *urb) int rc; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* The urb might have been killed. */ if (status) { - dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, + dbg("%s - nonzero read bulk status received: %d", __func__, status); return; } @@ -649,12 +649,12 @@ static void klsi_105_read_bulk_callback (struct urb *urb) */ if (urb->actual_length == 0) { /* empty urbs seem to happen, we ignore them */ - /* dbg("%s - emtpy URB", __FUNCTION__); */ + /* dbg("%s - emtpy URB", __func__); */ ; } else if (urb->actual_length <= 2) { - dbg("%s - size %d URB not understood", __FUNCTION__, + dbg("%s - size %d URB not understood", __func__, urb->actual_length); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); } else { int bytes_sent = ((__u8 *) data)[0] + @@ -666,12 +666,12 @@ static void klsi_105_read_bulk_callback (struct urb *urb) * intermixed tty_flip_buffer_push()s * FIXME */ - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); if (bytes_sent + 2 > urb->actual_length) { dbg("%s - trying to read more data than available" - " (%d vs. %d)", __FUNCTION__, + " (%d vs. %d)", __func__, bytes_sent+2, urb->actual_length); /* cap at implied limit */ bytes_sent = urb->actual_length - 2; @@ -694,7 +694,7 @@ static void klsi_105_read_bulk_callback (struct urb *urb) port); rc = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (rc) - err("%s - failed resubmitting read urb, error %d", __FUNCTION__, rc); + err("%s - failed resubmitting read urb, error %d", __func__, rc); } /* klsi_105_read_bulk_callback */ @@ -718,7 +718,7 @@ static void klsi_105_set_termios (struct usb_serial_port *port, if( (cflag & CBAUD) != (old_cflag & CBAUD) ) { /* reassert DTR and (maybe) RTS on transition from B0 */ if( (old_cflag & CBAUD) == B0 ) { - dbg("%s: baud was B0", __FUNCTION__); + dbg("%s: baud was B0", __func__); #if 0 priv->control_state |= TIOCM_DTR; /* don't set RTS if using hardware flow control */ @@ -764,7 +764,7 @@ static void klsi_105_set_termios (struct usb_serial_port *port, break; } if ((cflag & CBAUD) == B0 ) { - dbg("%s: baud is B0", __FUNCTION__); + dbg("%s: baud is B0", __func__); /* Drop RTS and DTR */ /* maybe this should be simulated by sending read * disable and read enable messages? @@ -781,11 +781,11 @@ static void klsi_105_set_termios (struct usb_serial_port *port, /* set the number of data bits */ switch (cflag & CSIZE) { case CS5: - dbg("%s - 5 bits/byte not supported", __FUNCTION__); + dbg("%s - 5 bits/byte not supported", __func__); spin_unlock_irqrestore (&priv->lock, flags); return ; case CS6: - dbg("%s - 6 bits/byte not supported", __FUNCTION__); + dbg("%s - 6 bits/byte not supported", __func__); spin_unlock_irqrestore (&priv->lock, flags); return ; case CS7: @@ -859,7 +859,7 @@ static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state ) struct mct_u232_private *priv = (struct mct_u232_private *)port->private; unsigned char lcr = priv->last_lcr; - dbg("%sstate=%d", __FUNCTION__, break_state); + dbg("%sstate=%d", __func__, break_state); if (break_state) lcr |= MCT_U232_SET_BREAK; @@ -874,7 +874,7 @@ static int klsi_105_tiocmget (struct usb_serial_port *port, struct file *file) unsigned long flags; int rc; unsigned long line_state; - dbg("%s - request, just guessing", __FUNCTION__); + dbg("%s - request, just guessing", __func__); rc = klsi_105_get_line_state(port, &line_state); if (rc < 0) { @@ -886,7 +886,7 @@ static int klsi_105_tiocmget (struct usb_serial_port *port, struct file *file) spin_lock_irqsave (&priv->lock, flags); priv->line_state = line_state; spin_unlock_irqrestore (&priv->lock, flags); - dbg("%s - read line state 0x%lx", __FUNCTION__, line_state); + dbg("%s - read line state 0x%lx", __func__, line_state); return (int)line_state; } @@ -895,7 +895,7 @@ static int klsi_105_tiocmset (struct usb_serial_port *port, struct file *file, { int retval = -EINVAL; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* if this ever gets implemented, it should be done something like this: struct usb_serial *serial = port->serial; @@ -921,7 +921,7 @@ static int klsi_105_tiocmset (struct usb_serial_port *port, struct file *file, static void klsi_105_throttle (struct usb_serial_port *port) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); } @@ -929,12 +929,12 @@ static void klsi_105_unthrottle (struct usb_serial_port *port) { int result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed submitting read urb, error %d", __FUNCTION__, + err("%s - failed submitting read urb, error %d", __func__, result); } diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 78458c807eac..693f00da7c03 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -183,11 +183,11 @@ static int kobil_startup (struct usb_serial *serial) for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { endpoint = &altsetting->endpoint[i]; if (usb_endpoint_is_int_out(&endpoint->desc)) { - dbg("%s Found interrupt out endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress); + dbg("%s Found interrupt out endpoint. Address: %d", __func__, endpoint->desc.bEndpointAddress); priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress; } if (usb_endpoint_is_int_in(&endpoint->desc)) { - dbg("%s Found interrupt in endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress); + dbg("%s Found interrupt in endpoint. Address: %d", __func__, endpoint->desc.bEndpointAddress); priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress; } } @@ -198,7 +198,7 @@ static int kobil_startup (struct usb_serial *serial) static void kobil_shutdown (struct usb_serial *serial) { int i; - dbg("%s - port %d", __FUNCTION__, serial->port[0]->number); + dbg("%s - port %d", __func__, serial->port[0]->number); for (i=0; i < serial->num_ports; ++i) { while (serial->port[i]->open_count > 0) { @@ -218,7 +218,7 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp) int transfer_buffer_length = 8; int write_urb_transfer_buffer_length = 8; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); priv = usb_get_serial_port_data(port); // someone sets the dev to 0 if the close method has been called @@ -245,10 +245,10 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp) // allocate write_urb if (!port->write_urb) { - dbg("%s - port %d Allocating port->write_urb", __FUNCTION__, port->number); + dbg("%s - port %d Allocating port->write_urb", __func__, port->number); port->write_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->write_urb) { - dbg("%s - port %d usb_alloc_urb failed", __FUNCTION__, port->number); + dbg("%s - port %d usb_alloc_urb failed", __func__, port->number); kfree(transfer_buffer); return -ENOMEM; } @@ -274,7 +274,7 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp) transfer_buffer_length, KOBIL_TIMEOUT ); - dbg("%s - port %d Send get_HW_version URB returns: %i", __FUNCTION__, port->number, result); + dbg("%s - port %d Send get_HW_version URB returns: %i", __func__, port->number, result); dbg("Harware version: %i.%i.%i", transfer_buffer[0], transfer_buffer[1], transfer_buffer[2] ); // get firmware version @@ -288,7 +288,7 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp) transfer_buffer_length, KOBIL_TIMEOUT ); - dbg("%s - port %d Send get_FW_version URB returns: %i", __FUNCTION__, port->number, result); + dbg("%s - port %d Send get_FW_version URB returns: %i", __func__, port->number, result); dbg("Firmware version: %i.%i.%i", transfer_buffer[0], transfer_buffer[1], transfer_buffer[2] ); if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { @@ -303,7 +303,7 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp) 0, KOBIL_TIMEOUT ); - dbg("%s - port %d Send set_baudrate URB returns: %i", __FUNCTION__, port->number, result); + dbg("%s - port %d Send set_baudrate URB returns: %i", __func__, port->number, result); // reset all queues result = usb_control_msg( port->serial->dev, @@ -316,13 +316,13 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp) 0, KOBIL_TIMEOUT ); - dbg("%s - port %d Send reset_all_queues URB returns: %i", __FUNCTION__, port->number, result); + dbg("%s - port %d Send reset_all_queues URB returns: %i", __func__, port->number, result); } if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { // start reading (Adapter B 'cause PNP string) result = usb_submit_urb( port->interrupt_in_urb, GFP_ATOMIC ); - dbg("%s - port %d Send read URB returns: %i", __FUNCTION__, port->number, result); + dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result); } kfree(transfer_buffer); @@ -332,7 +332,7 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp) static void kobil_close (struct usb_serial_port *port, struct file *filp) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (port->write_urb) { usb_kill_urb(port->write_urb); @@ -352,11 +352,11 @@ static void kobil_read_int_callback(struct urb *urb) int status = urb->status; // char *dbg_data; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("%s - port %d Read int status not zero: %d", - __FUNCTION__, port->number, status); + __func__, port->number, status); return; } @@ -386,7 +386,7 @@ static void kobil_read_int_callback(struct urb *urb) port->interrupt_in_urb->dev = port->serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - dbg("%s - port %d Send read URB returns: %i", __FUNCTION__, port->number, result); + dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result); } @@ -404,21 +404,21 @@ static int kobil_write (struct usb_serial_port *port, struct kobil_private * priv; if (count == 0) { - dbg("%s - port %d write request of 0 bytes", __FUNCTION__, port->number); + dbg("%s - port %d write request of 0 bytes", __func__, port->number); return 0; } priv = usb_get_serial_port_data(port); if (count > (KOBIL_BUF_LENGTH - priv->filled)) { - dbg("%s - port %d Error: write request bigger than buffer size", __FUNCTION__, port->number); + dbg("%s - port %d Error: write request bigger than buffer size", __func__, port->number); return -ENOMEM; } // Copy data to buffer memcpy (priv->buf + priv->filled, buf, count); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, priv->buf + priv->filled); + usb_serial_debug_data(debug, &port->dev, __func__, count, priv->buf + priv->filled); priv->filled = priv->filled + count; @@ -450,7 +450,7 @@ static int kobil_write (struct usb_serial_port *port, priv->cur_pos = priv->cur_pos + length; result = usb_submit_urb( port->write_urb, GFP_NOIO ); - dbg("%s - port %d Send write URB returns: %i", __FUNCTION__, port->number, result); + dbg("%s - port %d Send write URB returns: %i", __func__, port->number, result); todo = priv->filled - priv->cur_pos; if (todo > 0) { @@ -471,7 +471,7 @@ static int kobil_write (struct usb_serial_port *port, port->interrupt_in_urb->dev = port->serial->dev; result = usb_submit_urb( port->interrupt_in_urb, GFP_NOIO ); - dbg("%s - port %d Send read URB returns: %i", __FUNCTION__, port->number, result); + dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result); } } return count; @@ -480,7 +480,7 @@ static int kobil_write (struct usb_serial_port *port, static int kobil_write_room (struct usb_serial_port *port) { - //dbg("%s - port %d", __FUNCTION__, port->number); + //dbg("%s - port %d", __func__, port->number); return 8; } @@ -515,7 +515,7 @@ static int kobil_tiocmget(struct usb_serial_port *port, struct file *file) KOBIL_TIMEOUT); dbg("%s - port %d Send get_status_line_state URB returns: %i. Statusline: %02x", - __FUNCTION__, port->number, result, transfer_buffer[0]); + __func__, port->number, result, transfer_buffer[0]); result = 0; if ((transfer_buffer[0] & SUSBCR_GSL_DSR) != 0) @@ -558,9 +558,9 @@ static int kobil_tiocmset(struct usb_serial_port *port, struct file *file, if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) { if (dtr != 0) - dbg("%s - port %d Setting DTR", __FUNCTION__, port->number); + dbg("%s - port %d Setting DTR", __func__, port->number); else - dbg("%s - port %d Clearing DTR", __FUNCTION__, port->number); + dbg("%s - port %d Clearing DTR", __func__, port->number); result = usb_control_msg( port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0 ), SUSBCRequest_SetStatusLinesOrQueues, @@ -572,9 +572,9 @@ static int kobil_tiocmset(struct usb_serial_port *port, struct file *file, KOBIL_TIMEOUT); } else { if (rts != 0) - dbg("%s - port %d Setting RTS", __FUNCTION__, port->number); + dbg("%s - port %d Setting RTS", __func__, port->number); else - dbg("%s - port %d Clearing RTS", __FUNCTION__, port->number); + dbg("%s - port %d Clearing RTS", __func__, port->number); result = usb_control_msg( port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0 ), SUSBCRequest_SetStatusLinesOrQueues, @@ -585,7 +585,7 @@ static int kobil_tiocmset(struct usb_serial_port *port, struct file *file, 0, KOBIL_TIMEOUT); } - dbg("%s - port %d Send set_status_line URB returns: %i", __FUNCTION__, port->number, result); + dbg("%s - port %d Send set_status_line URB returns: %i", __func__, port->number, result); kfree(transfer_buffer); return (result < 0) ? result : 0; } @@ -678,7 +678,7 @@ static int kobil_ioctl(struct usb_serial_port *port, struct file * file, unsigne KOBIL_TIMEOUT ); - dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __FUNCTION__, port->number, result); + dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __func__, port->number, result); kfree(transfer_buffer); return (result < 0) ? -EFAULT : 0; default: diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index b9e0fbacc8a4..e25c0c2791eb 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -399,7 +399,7 @@ static void mct_u232_shutdown (struct usb_serial *serial) struct mct_u232_private *priv; int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); for (i=0; i < serial->num_ports; ++i) { /* My special items, the standard routines free my urbs */ @@ -421,7 +421,7 @@ static int mct_u232_open (struct usb_serial_port *port, struct file *filp) unsigned char last_lcr; unsigned char last_msr; - dbg("%s port %d", __FUNCTION__, port->number); + dbg("%s port %d", __func__, port->number); /* Compensate for a hardware bug: although the Sitecom U232-P25 * device reports a maximum output packet size of 32 bytes, @@ -486,7 +486,7 @@ static void mct_u232_close (struct usb_serial_port *port, struct file *filp) unsigned int c_cflag; unsigned int control_state; struct mct_u232_private *priv = usb_get_serial_port_data(port); - dbg("%s port %d", __FUNCTION__, port->number); + dbg("%s port %d", __func__, port->number); if (port->tty) { c_cflag = port->tty->termios->c_cflag; @@ -532,21 +532,21 @@ static void mct_u232_read_int_callback (struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dbg("%s - nonzero urb status received: %d", - __FUNCTION__, status); + __func__, status); goto exit; } if (!serial) { - dbg("%s - bad serial pointer, exiting", __FUNCTION__); + dbg("%s - bad serial pointer, exiting", __func__); return; } - dbg("%s - port %d", __FUNCTION__, port->number); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + dbg("%s - port %d", __func__, port->number); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); /* * Work-a-round: handle the 'usual' bulk-in pipe here @@ -603,7 +603,7 @@ exit: retval = usb_submit_urb (urb, GFP_ATOMIC); if (retval) err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); + __func__, retval); } /* mct_u232_read_int_callback */ static void mct_u232_set_termios (struct usb_serial_port *port, @@ -633,7 +633,7 @@ static void mct_u232_set_termios (struct usb_serial_port *port, /* reassert DTR and RTS on transition from B0 */ if ((old_cflag & CBAUD) == B0) { - dbg("%s: baud was B0", __FUNCTION__); + dbg("%s: baud was B0", __func__); control_state |= TIOCM_DTR | TIOCM_RTS; mct_u232_set_modem_ctrl(serial, control_state); } @@ -641,7 +641,7 @@ static void mct_u232_set_termios (struct usb_serial_port *port, mct_u232_set_baud_rate(serial, port, tty_get_baud_rate(port->tty)); if ((cflag & CBAUD) == B0 ) { - dbg("%s: baud is B0", __FUNCTION__); + dbg("%s: baud is B0", __func__); /* Drop RTS and DTR */ control_state &= ~(TIOCM_DTR | TIOCM_RTS); mct_u232_set_modem_ctrl(serial, control_state); @@ -696,7 +696,7 @@ static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state ) unsigned char lcr; unsigned long flags; - dbg("%sstate=%d", __FUNCTION__, break_state); + dbg("%sstate=%d", __func__, break_state); spin_lock_irqsave(&priv->lock, flags); lcr = priv->last_lcr; @@ -715,7 +715,7 @@ static int mct_u232_tiocmget (struct usb_serial_port *port, struct file *file) unsigned int control_state; unsigned long flags; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); spin_lock_irqsave(&priv->lock, flags); control_state = priv->control_state; @@ -732,7 +732,7 @@ static int mct_u232_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int control_state; unsigned long flags; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); spin_lock_irqsave(&priv->lock, flags); control_state = priv->control_state; @@ -754,7 +754,7 @@ static int mct_u232_tiocmset (struct usb_serial_port *port, struct file *file, static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) { - dbg("%scmd=0x%x", __FUNCTION__, cmd); + dbg("%scmd=0x%x", __func__, cmd); /* Based on code from acm.c and others */ switch (cmd) { @@ -769,7 +769,7 @@ static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file, return 0; default: - dbg("%s: arg not supported - 0x%04x", __FUNCTION__,cmd); + dbg("%s: arg not supported - 0x%04x", __func__,cmd); return(-ENOIOCTLCMD); break; } @@ -784,7 +784,7 @@ static void mct_u232_throttle (struct usb_serial_port *port) struct tty_struct *tty; tty = port->tty; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); priv->rx_flags |= THROTTLED; @@ -806,7 +806,7 @@ static void mct_u232_unthrottle (struct usb_serial_port *port) unsigned int control_state; struct tty_struct *tty; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); tty = port->tty; spin_lock_irqsave(&priv->lock, flags); diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 2e14fdd08464..74b889bf19cf 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -118,11 +118,11 @@ static void mos7720_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, + dbg("%s - urb shutting down with status: %d", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, + dbg("%s - nonzero urb status received: %d", __func__, status); goto exit; } @@ -183,7 +183,7 @@ exit: if (result) dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", - __FUNCTION__, result); + __func__, result); return; } @@ -214,7 +214,7 @@ static void mos7720_bulk_in_callback(struct urb *urb) port = mos7720_port->port; - dbg("Entering...%s", __FUNCTION__); + dbg("Entering...%s", __func__); data = urb->transfer_buffer; @@ -362,7 +362,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { - err("%s-out of memory for urb buffers.", __FUNCTION__); + err("%s-out of memory for urb buffers.", __func__); usb_free_urb(mos7720_port->write_urb_pool[j]); mos7720_port->write_urb_pool[j] = NULL; continue; @@ -479,7 +479,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) if (response) dev_err(&port->dev, "%s - Error %d submitting control urb\n", - __FUNCTION__, response); + __func__, response); } /* set up our bulk in urb */ @@ -492,7 +492,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) response = usb_submit_urb(port->read_urb, GFP_KERNEL); if (response) dev_err(&port->dev, - "%s - Error %d submitting read urb\n", __FUNCTION__, response); + "%s - Error %d submitting read urb\n", __func__, response); /* initialize our icount structure */ memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount)); @@ -521,11 +521,11 @@ static int mos7720_chars_in_buffer(struct usb_serial_port *port) int chars = 0; struct moschip_port *mos7720_port; - dbg("%s:entering ...........", __FUNCTION__); + dbg("%s:entering ...........", __func__); mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) { - dbg("%s:leaving ...........", __FUNCTION__); + dbg("%s:leaving ...........", __func__); return -ENODEV; } @@ -533,7 +533,7 @@ static int mos7720_chars_in_buffer(struct usb_serial_port *port) if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; } - dbg("%s - returns %d", __FUNCTION__, chars); + dbg("%s - returns %d", __func__, chars); return chars; } @@ -585,7 +585,7 @@ static void mos7720_close(struct usb_serial_port *port, struct file *filp) mutex_unlock(&serial->disc_mutex); mos7720_port->open = 0; - dbg("Leaving %s", __FUNCTION__); + dbg("Leaving %s", __func__); } static void mos7720_break(struct usb_serial_port *port, int break_state) @@ -594,7 +594,7 @@ static void mos7720_break(struct usb_serial_port *port, int break_state) struct usb_serial *serial; struct moschip_port *mos7720_port; - dbg("Entering %s", __FUNCTION__); + dbg("Entering %s", __func__); serial = port->serial; @@ -627,11 +627,11 @@ static int mos7720_write_room(struct usb_serial_port *port) int room = 0; int i; - dbg("%s:entering ...........", __FUNCTION__); + dbg("%s:entering ...........", __func__); mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) { - dbg("%s:leaving ...........", __FUNCTION__); + dbg("%s:leaving ...........", __func__); return -ENODEV; } @@ -640,7 +640,7 @@ static int mos7720_write_room(struct usb_serial_port *port) room += URB_TRANSFER_BUFFER_SIZE; } - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return room; } @@ -657,7 +657,7 @@ static int mos7720_write(struct usb_serial_port *port, struct urb *urb; const unsigned char *current_position = data; - dbg("%s:entering ...........", __FUNCTION__); + dbg("%s:entering ...........", __func__); serial = port->serial; @@ -679,7 +679,7 @@ static int mos7720_write(struct usb_serial_port *port, } if (urb == NULL) { - dbg("%s - no more free urbs", __FUNCTION__); + dbg("%s - no more free urbs", __func__); goto exit; } @@ -687,14 +687,14 @@ static int mos7720_write(struct usb_serial_port *port, urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (urb->transfer_buffer == NULL) { - err("%s no more kernel memory...", __FUNCTION__); + err("%s no more kernel memory...", __func__); goto exit; } } transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE); memcpy(urb->transfer_buffer, current_position, transfer_size); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, + usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer); /* fill urb with data and submit */ @@ -708,7 +708,7 @@ static int mos7720_write(struct usb_serial_port *port, status = usb_submit_urb(urb,GFP_ATOMIC); if (status) { err("%s - usb_submit_urb(write bulk) failed with status = %d", - __FUNCTION__, status); + __func__, status); bytes_sent = status; goto exit; } @@ -724,7 +724,7 @@ static void mos7720_throttle(struct usb_serial_port *port) struct tty_struct *tty; int status; - dbg("%s- port %d\n", __FUNCTION__, port->number); + dbg("%s- port %d\n", __func__, port->number); mos7720_port = usb_get_serial_port_data(port); @@ -736,11 +736,11 @@ static void mos7720_throttle(struct usb_serial_port *port) return; } - dbg("%s: Entering ..........", __FUNCTION__); + dbg("%s: Entering ..........", __func__); tty = port->tty; if (!tty) { - dbg("%s - no tty available", __FUNCTION__); + dbg("%s - no tty available", __func__); return; } @@ -773,15 +773,15 @@ static void mos7720_unthrottle(struct usb_serial_port *port) return; if (!mos7720_port->open) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return; } - dbg("%s: Entering ..........", __FUNCTION__); + dbg("%s: Entering ..........", __func__); tty = port->tty; if (!tty) { - dbg("%s - no tty available", __FUNCTION__); + dbg("%s - no tty available", __func__); return; } @@ -922,7 +922,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) __u16 round; - dbg("%s - %d", __FUNCTION__, baudrate); + dbg("%s - %d", __func__, baudrate); for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { if (divisor_table[i].baudrate == baudrate) { @@ -973,15 +973,15 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, port = mos7720_port->port; serial = port->serial; - dbg("%s: Entering ..........", __FUNCTION__); + dbg("%s: Entering ..........", __func__); number = port->number - port->serial->minor; - dbg("%s - port = %d, baud = %d", __FUNCTION__, port->number, baudrate); + dbg("%s - port = %d, baud = %d", __func__, port->number, baudrate); /* Calculate the Divisor */ status = calc_baud_rate_divisor(baudrate, &divisor); if (status) { - err("%s - bad baud rate", __FUNCTION__); + err("%s - bad baud rate", __func__); return status; } @@ -1034,16 +1034,16 @@ static void change_port_settings(struct moschip_port *mos7720_port, serial = port->serial; port_number = port->number - port->serial->minor; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!mos7720_port->open) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return; } tty = mos7720_port->port->tty; - dbg("%s: Entering ..........", __FUNCTION__); + dbg("%s: Entering ..........", __func__); lData = UART_LCR_WLEN8; lStop = 0x00; /* 1 stop bit */ @@ -1078,14 +1078,14 @@ static void change_port_settings(struct moschip_port *mos7720_port, if (cflag & PARENB) { if (cflag & PARODD) { lParity = UART_LCR_PARITY; - dbg("%s - parity = odd", __FUNCTION__); + dbg("%s - parity = odd", __func__); } else { lParity = (UART_LCR_EPAR | UART_LCR_PARITY); - dbg("%s - parity = even", __FUNCTION__); + dbg("%s - parity = even", __func__); } } else { - dbg("%s - parity = none", __FUNCTION__); + dbg("%s - parity = none", __func__); } if (cflag & CMSPAR) @@ -1094,10 +1094,10 @@ static void change_port_settings(struct moschip_port *mos7720_port, /* Change the Stop bit */ if (cflag & CSTOPB) { lStop = UART_LCR_STOP; - dbg("%s - stop bits = 2", __FUNCTION__); + dbg("%s - stop bits = 2", __func__); } else { lStop = 0x00; - dbg("%s - stop bits = 1", __FUNCTION__); + dbg("%s - stop bits = 1", __func__); } #define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ @@ -1171,7 +1171,7 @@ static void change_port_settings(struct moschip_port *mos7720_port, return; } - dbg("%s - baud rate = %d", __FUNCTION__, baud); + dbg("%s - baud rate = %d", __func__, baud); status = send_cmd_write_baud_rate(mos7720_port, baud); /* FIXME: needs to write actual resulting baud back not just blindly do so */ @@ -1217,7 +1217,7 @@ static void mos7720_set_termios(struct usb_serial_port *port, if (!mos7720_port->open) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return; } @@ -1225,15 +1225,15 @@ static void mos7720_set_termios(struct usb_serial_port *port, cflag = tty->termios->c_cflag; - dbg("%s - cflag %08x iflag %08x", __FUNCTION__, + dbg("%s - cflag %08x iflag %08x", __func__, tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); - dbg("%s - old cflag %08x old iflag %08x", __FUNCTION__, + dbg("%s - old cflag %08x old iflag %08x", __func__, old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* change the port settings to the new ones specified */ change_port_settings(mos7720_port, old_termios); @@ -1271,7 +1271,7 @@ static int get_lsr_info(struct moschip_port *mos7720_port, count = mos7720_chars_in_buffer(mos7720_port->port); if (count == 0) { - dbg("%s -- Empty", __FUNCTION__); + dbg("%s -- Empty", __func__); result = TIOCSER_TEMT; } @@ -1296,7 +1296,7 @@ static int get_number_bytes_avail(struct moschip_port *mos7720_port, result = tty->read_cnt; - dbg("%s(%d) = %d", __FUNCTION__, mos7720_port->port->number, result); + dbg("%s(%d) = %d", __func__, mos7720_port->port->number, result); if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; @@ -1374,7 +1374,7 @@ static int get_modem_info(struct moschip_port *mos7720_port, | ((msr & UART_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ - dbg("%s -- %x", __FUNCTION__, result); + dbg("%s -- %x", __func__, result); if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; @@ -1418,45 +1418,45 @@ static int mos7720_ioctl(struct usb_serial_port *port, struct file *file, if (mos7720_port == NULL) return -ENODEV; - dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd); + dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); switch (cmd) { case TIOCINQ: /* return number of bytes available */ - dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number); + dbg("%s (%d) TIOCINQ", __func__, port->number); return get_number_bytes_avail(mos7720_port, (unsigned int __user *)arg); break; case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number); + dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); return get_lsr_info(mos7720_port, (unsigned int __user *)arg); return 0; case TIOCMBIS: case TIOCMBIC: case TIOCMSET: - dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__, + dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__, port->number); return set_modem_info(mos7720_port, cmd, (unsigned int __user *)arg); case TIOCMGET: - dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number); + dbg("%s (%d) TIOCMGET", __func__, port->number); return get_modem_info(mos7720_port, (unsigned int __user *)arg); case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number); + dbg("%s (%d) TIOCGSERIAL", __func__, port->number); return get_serial_info(mos7720_port, (struct serial_struct __user *)arg); case TIOCSSERIAL: - dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number); + dbg("%s (%d) TIOCSSERIAL", __func__, port->number); break; case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number); + dbg("%s (%d) TIOCMIWAIT", __func__, port->number); cprev = mos7720_port->icount; while (1) { if (signal_pending(current)) @@ -1490,7 +1490,7 @@ static int mos7720_ioctl(struct usb_serial_port *port, struct file *file, icount.brk = cnow.brk; icount.buf_overrun = cnow.buf_overrun; - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, + dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, icount.rx, icount.tx ); if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) return -EFAULT; @@ -1508,7 +1508,7 @@ static int mos7720_startup(struct usb_serial *serial) int i; char data; - dbg("%s: Entering ..........", __FUNCTION__); + dbg("%s: Entering ..........", __func__); if (!serial) { dbg("Invalid Handler"); @@ -1520,7 +1520,7 @@ static int mos7720_startup(struct usb_serial *serial) /* create our private serial structure */ mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL); if (mos7720_serial == NULL) { - err("%s - Out of memory", __FUNCTION__); + err("%s - Out of memory", __func__); return -ENOMEM; } @@ -1533,7 +1533,7 @@ static int mos7720_startup(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7720_port == NULL) { - err("%s - Out of memory", __FUNCTION__); + err("%s - Out of memory", __func__); usb_set_serial_data(serial, NULL); kfree(mos7720_serial); return -ENOMEM; @@ -1617,7 +1617,7 @@ static int __init moschip7720_init(void) { int retval; - dbg("%s: Entering ..........", __FUNCTION__); + dbg("%s: Entering ..........", __func__); /* Register with the usb serial */ retval = usb_serial_register(&moschip7720_2port_driver); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 37c4f0736bc1..7823222570b6 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -403,7 +403,7 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) { struct async_icount *icount; - dbg("%s - %02x", __FUNCTION__, new_lsr); + dbg("%s - %02x", __func__, new_lsr); if (new_lsr & SERIAL_LSR_BI) { // @@ -459,21 +459,21 @@ static void mos7840_control_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, + dbg("%s - urb shutting down with status: %d", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, + dbg("%s - nonzero urb status received: %d", __func__, status); goto exit; } - dbg("%s urb buffer size is %d\n", __FUNCTION__, urb->actual_length); - dbg("%s mos7840_port->MsrLsr is %d port %d\n", __FUNCTION__, + dbg("%s urb buffer size is %d\n", __func__, urb->actual_length); + dbg("%s mos7840_port->MsrLsr is %d port %d\n", __func__, mos7840_port->MsrLsr, mos7840_port->port_num); data = urb->transfer_buffer; regval = (__u8) data[0]; - dbg("%s data is %x\n", __FUNCTION__, regval); + dbg("%s data is %x\n", __func__, regval); if (mos7840_port->MsrLsr == 0) mos7840_handle_new_msr(mos7840_port, regval); else if (mos7840_port->MsrLsr == 1) @@ -487,7 +487,7 @@ exit: if (result) { dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n", - __FUNCTION__, result); + __func__, result); } } @@ -542,11 +542,11 @@ static void mos7840_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, + dbg("%s - urb shutting down with status: %d", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, + dbg("%s - nonzero urb status received: %d", __func__, status); goto exit; } @@ -614,7 +614,7 @@ exit: if (result) { dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n", - __FUNCTION__, result); + __func__, result); } } @@ -692,12 +692,12 @@ static void mos7840_bulk_in_callback(struct urb *urb) } port = (struct usb_serial_port *)mos7840_port->port; - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Port Paranoia failed \n"); return; } - serial = mos7840_get_usb_serial(port, __FUNCTION__); + serial = mos7840_get_usb_serial(port, __func__); if (!serial) { dbg("%s\n", "Bad serial pointer "); return; @@ -767,7 +767,7 @@ static void mos7840_bulk_out_data_callback(struct urb *urb) return; } - if (mos7840_port_paranoia_check(mos7840_port->port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(mos7840_port->port, __func__)) { dbg("%s", "Port Paranoia failed \n"); return; } @@ -815,14 +815,14 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) struct moschip_port *mos7840_port; struct moschip_port *port0; - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Port Paranoia failed \n"); return -ENODEV; } serial = port->serial; - if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) { + if (mos7840_serial_paranoia_check(serial, __func__)) { dbg("%s", "Serial Paranoia failed \n"); return -ENODEV; } @@ -851,7 +851,7 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) if (!urb->transfer_buffer) { usb_free_urb(urb); mos7840_port->write_urb_pool[j] = NULL; - err("%s-out of memory for urb buffers.", __FUNCTION__); + err("%s-out of memory for urb buffers.", __func__); continue; } } @@ -1039,7 +1039,7 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) GFP_KERNEL); if (response) { err("%s - Error %d submitting interrupt urb", - __FUNCTION__, response); + __func__, response); } } @@ -1072,7 +1072,7 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) port->bulk_in_endpointAddress); response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); if (response) { - err("%s - Error %d submitting control urb", __FUNCTION__, + err("%s - Error %d submitting control urb", __func__, response); } @@ -1116,7 +1116,7 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port) dbg("%s \n", " mos7840_chars_in_buffer:entering ..........."); - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port \n"); return -1; } @@ -1134,7 +1134,7 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port) } } spin_unlock_irqrestore(&mos7840_port->pool_lock,flags); - dbg("%s - returns %d", __FUNCTION__, chars); + dbg("%s - returns %d", __func__, chars); return chars; } @@ -1171,7 +1171,7 @@ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port) /* No activity.. count down section */ wait--; if (wait == 0) { - dbg("%s - TIMEOUT", __FUNCTION__); + dbg("%s - TIMEOUT", __func__); return; } else { /* Reset timeout value back to seconds */ @@ -1195,12 +1195,12 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp) dbg("%s\n", "mos7840_close:entering..."); - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Port Paranoia failed \n"); return; } - serial = mos7840_get_usb_serial(port, __FUNCTION__); + serial = mos7840_get_usb_serial(port, __func__); if (!serial) { dbg("%s", "Serial Paranoia failed \n"); return; @@ -1314,7 +1314,7 @@ static void mos7840_block_until_chase_response(struct moschip_port /* No activity.. count down section */ wait--; if (wait == 0) { - dbg("%s - TIMEOUT", __FUNCTION__); + dbg("%s - TIMEOUT", __func__); return; } else { /* Reset timeout value back to seconds */ @@ -1337,12 +1337,12 @@ static void mos7840_break(struct usb_serial_port *port, int break_state) dbg("%s \n", "Entering ..........."); dbg("mos7840_break: Start\n"); - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Port Paranoia failed \n"); return; } - serial = mos7840_get_usb_serial(port, __FUNCTION__); + serial = mos7840_get_usb_serial(port, __func__); if (!serial) { dbg("%s", "Serial Paranoia failed \n"); return; @@ -1392,7 +1392,7 @@ static int mos7840_write_room(struct usb_serial_port *port) dbg("%s \n", " mos7840_write_room:entering ..........."); - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port \n"); dbg("%s \n", " mos7840_write_room:leaving ..........."); return -1; @@ -1413,7 +1413,7 @@ static int mos7840_write_room(struct usb_serial_port *port) spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1; - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return room; } @@ -1480,13 +1480,13 @@ static int mos7840_write(struct usb_serial_port *port, status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); #endif - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Port Paranoia failed \n"); return -1; } serial = port->serial; - if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) { + if (mos7840_serial_paranoia_check(serial, __func__)) { dbg("%s", "Serial Paranoia failed \n"); return -1; } @@ -1512,7 +1512,7 @@ static int mos7840_write(struct usb_serial_port *port, spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); if (urb == NULL) { - dbg("%s - no more free urbs", __FUNCTION__); + dbg("%s - no more free urbs", __func__); goto exit; } @@ -1521,7 +1521,7 @@ static int mos7840_write(struct usb_serial_port *port, kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (urb->transfer_buffer == NULL) { - err("%s no more kernel memory...", __FUNCTION__); + err("%s no more kernel memory...", __func__); goto exit; } } @@ -1547,7 +1547,7 @@ static int mos7840_write(struct usb_serial_port *port, if (status) { mos7840_port->busy[i] = 0; err("%s - usb_submit_urb(write bulk) failed with status = %d", - __FUNCTION__, status); + __func__, status); bytes_sent = status; goto exit; } @@ -1573,7 +1573,7 @@ static void mos7840_throttle(struct usb_serial_port *port) struct tty_struct *tty; int status; - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port \n"); return; } @@ -1594,7 +1594,7 @@ static void mos7840_throttle(struct usb_serial_port *port) tty = port->tty; if (!tty) { - dbg("%s - no tty available", __FUNCTION__); + dbg("%s - no tty available", __func__); return; } @@ -1634,7 +1634,7 @@ static void mos7840_unthrottle(struct usb_serial_port *port) int status; struct moschip_port *mos7840_port = mos7840_get_port_private(port); - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port \n"); return; } @@ -1643,7 +1643,7 @@ static void mos7840_unthrottle(struct usb_serial_port *port) return; if (!mos7840_port->open) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return; } @@ -1651,7 +1651,7 @@ static void mos7840_unthrottle(struct usb_serial_port *port) tty = port->tty; if (!tty) { - dbg("%s - no tty available", __FUNCTION__); + dbg("%s - no tty available", __func__); return; } @@ -1688,7 +1688,7 @@ static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file) int status = 0; mos7840_port = mos7840_get_port_private(port); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (mos7840_port == NULL) return -ENODEV; @@ -1703,7 +1703,7 @@ static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file) | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); - dbg("%s - 0x%04X", __FUNCTION__, result); + dbg("%s - 0x%04X", __func__, result); return result; } @@ -1715,7 +1715,7 @@ static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file, unsigned int mcr; unsigned int status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); mos7840_port = mos7840_get_port_private(port); @@ -1759,7 +1759,7 @@ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, __u16 * clk_sel_val) { - dbg("%s - %d", __FUNCTION__, baudRate); + dbg("%s - %d", __func__, baudRate); if (baudRate <= 115200) { *divisor = 115200 / baudRate; @@ -1842,12 +1842,12 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, return -1; port = (struct usb_serial_port *)mos7840_port->port; - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port \n"); return -1; } - if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) { + if (mos7840_serial_paranoia_check(port->serial, __func__)) { dbg("%s", "Invalid Serial \n"); return -1; } @@ -1856,7 +1856,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, number = mos7840_port->port->number - mos7840_port->port->serial->minor; - dbg("%s - port = %d, baud = %d", __FUNCTION__, + dbg("%s - port = %d, baud = %d", __func__, mos7840_port->port->number, baudRate); //reset clk_uart_sel in spregOffset if (baudRate > 115200) { @@ -1916,7 +1916,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, /* Calculate the Divisor */ if (status) { - err("%s - bad baud rate", __FUNCTION__); + err("%s - bad baud rate", __func__); dbg("%s\n", "bad baud rate"); return status; } @@ -1970,22 +1970,22 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port, port = (struct usb_serial_port *)mos7840_port->port; - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port \n"); return; } - if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) { + if (mos7840_serial_paranoia_check(port->serial, __func__)) { dbg("%s", "Invalid Serial \n"); return; } serial = port->serial; - dbg("%s - port %d", __FUNCTION__, mos7840_port->port->number); + dbg("%s - port %d", __func__, mos7840_port->port->number); if (!mos7840_port->open) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return; } @@ -2024,14 +2024,14 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port, if (cflag & PARENB) { if (cflag & PARODD) { lParity = LCR_PAR_ODD; - dbg("%s - parity = odd", __FUNCTION__); + dbg("%s - parity = odd", __func__); } else { lParity = LCR_PAR_EVEN; - dbg("%s - parity = even", __FUNCTION__); + dbg("%s - parity = even", __func__); } } else { - dbg("%s - parity = none", __FUNCTION__); + dbg("%s - parity = none", __func__); } if (cflag & CMSPAR) { @@ -2041,10 +2041,10 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port, /* Change the Stop bit */ if (cflag & CSTOPB) { lStop = LCR_STOP_2; - dbg("%s - stop bits = 2", __FUNCTION__); + dbg("%s - stop bits = 2", __func__); } else { lStop = LCR_STOP_1; - dbg("%s - stop bits = 1", __FUNCTION__); + dbg("%s - stop bits = 1", __func__); } /* Update the LCR with the correct value */ @@ -2101,7 +2101,7 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port, baud = 9600; } - dbg("%s - baud rate = %d", __FUNCTION__, baud); + dbg("%s - baud rate = %d", __func__, baud); status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud); /* Enable Interrupts */ @@ -2141,14 +2141,14 @@ static void mos7840_set_termios(struct usb_serial_port *port, struct moschip_port *mos7840_port; struct tty_struct *tty; dbg("mos7840_set_termios: START\n"); - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port \n"); return; } serial = port->serial; - if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) { + if (mos7840_serial_paranoia_check(serial, __func__)) { dbg("%s", "Invalid Serial \n"); return; } @@ -2161,7 +2161,7 @@ static void mos7840_set_termios(struct usb_serial_port *port, tty = port->tty; if (!mos7840_port->open) { - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); return; } @@ -2169,11 +2169,11 @@ static void mos7840_set_termios(struct usb_serial_port *port, cflag = tty->termios->c_cflag; - dbg("%s - clfag %08x iflag %08x", __FUNCTION__, + dbg("%s - clfag %08x iflag %08x", __func__, tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); - dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, + dbg("%s - old clfag %08x old iflag %08x", __func__, old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* change the port settings to the new ones specified */ @@ -2214,7 +2214,7 @@ static int mos7840_get_lsr_info(struct moschip_port *mos7840_port, count = mos7840_chars_in_buffer(mos7840_port->port); if (count == 0) { - dbg("%s -- Empty", __FUNCTION__); + dbg("%s -- Empty", __func__); result = TIOCSER_TEMT; } @@ -2241,7 +2241,7 @@ static int mos7840_set_modem_info(struct moschip_port *mos7840_port, return -1; port = (struct usb_serial_port *)mos7840_port->port; - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port \n"); return -1; } @@ -2315,7 +2315,7 @@ static int mos7840_get_modem_info(struct moschip_port *mos7840_port, |((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ |((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ - dbg("%s -- %x", __FUNCTION__, result); + dbg("%s -- %x", __func__, result); if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; @@ -2372,7 +2372,7 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, struct serial_icounter_struct icount; int mosret = 0; - if (mos7840_port_paranoia_check(port, __FUNCTION__)) { + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port \n"); return -1; } @@ -2384,39 +2384,39 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, tty = mos7840_port->port->tty; - dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd); + dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); switch (cmd) { /* return number of bytes available */ case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number); + dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); return mos7840_get_lsr_info(mos7840_port, argp); return 0; case TIOCMBIS: case TIOCMBIC: case TIOCMSET: - dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__, + dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__, port->number); mosret = mos7840_set_modem_info(mos7840_port, cmd, argp); return mosret; case TIOCMGET: - dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number); + dbg("%s (%d) TIOCMGET", __func__, port->number); return mos7840_get_modem_info(mos7840_port, argp); case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number); + dbg("%s (%d) TIOCGSERIAL", __func__, port->number); return mos7840_get_serial_info(mos7840_port, argp); case TIOCSSERIAL: - dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number); + dbg("%s (%d) TIOCSSERIAL", __func__, port->number); break; case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number); + dbg("%s (%d) TIOCMIWAIT", __func__, port->number); cprev = mos7840_port->icount; while (1) { //interruptible_sleep_on(&mos7840_port->delta_msr_wait); @@ -2459,7 +2459,7 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, icount.brk = cnow.brk; icount.buf_overrun = cnow.buf_overrun; - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, + dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, icount.rx, icount.tx); if (copy_to_user(argp, &icount, sizeof(icount))) return -EFAULT; @@ -2522,7 +2522,7 @@ static int mos7840_startup(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7840_port == NULL) { - err("%s - Out of memory", __FUNCTION__); + err("%s - Out of memory", __func__); status = -ENOMEM; i--; /* don't follow NULL pointer cleaning up */ goto error; diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index ddaccbcde84d..7cea325d577c 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -49,15 +49,15 @@ static void navman_read_int_callback(struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dbg("%s - nonzero urb status received: %d", - __FUNCTION__, status); + __func__, status); goto exit; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); tty = port->tty; @@ -72,29 +72,29 @@ exit: if (result) dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n", - __FUNCTION__, result); + __func__, result); } static int navman_open(struct usb_serial_port *port, struct file *filp) { int result = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (port->interrupt_in_urb) { - dbg("%s - adding interrupt input for treo", __FUNCTION__); + dbg("%s - adding interrupt input for treo", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n", - __FUNCTION__, result); + __func__, result); } return result; } static void navman_close(struct usb_serial_port *port, struct file *filp) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->interrupt_in_urb); } @@ -102,7 +102,7 @@ static void navman_close(struct usb_serial_port *port, struct file *filp) static int navman_write(struct usb_serial_port *port, const unsigned char *buf, int count) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* * This device can't write any data, only read from the device diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 050511ff2b17..1b041c59aab2 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -150,7 +150,7 @@ static int omninet_attach (struct usb_serial *serial) od = kmalloc( sizeof(struct omninet_data), GFP_KERNEL ); if( !od ) { - err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct omninet_data)); + err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct omninet_data)); return -ENOMEM; } usb_set_serial_port_data(port, od); @@ -163,7 +163,7 @@ static int omninet_open (struct usb_serial_port *port, struct file *filp) struct usb_serial_port *wport; int result = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); wport = serial->port[1]; wport->tty = port->tty; @@ -175,7 +175,7 @@ static int omninet_open (struct usb_serial_port *port, struct file *filp) omninet_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { - err("%s - failed submitting read urb, error %d", __FUNCTION__, result); + err("%s - failed submitting read urb, error %d", __func__, result); } return result; @@ -183,7 +183,7 @@ static int omninet_open (struct usb_serial_port *port, struct file *filp) static void omninet_close (struct usb_serial_port *port, struct file * filp) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); } @@ -201,11 +201,11 @@ static void omninet_read_bulk_callback (struct urb *urb) int i; int result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } @@ -233,7 +233,7 @@ static void omninet_read_bulk_callback (struct urb *urb) omninet_read_bulk_callback, port); result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); + err("%s - failed resubmitting read urb, error %d", __func__, result); return; } @@ -248,17 +248,17 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf int result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (count == 0) { - dbg("%s - write request of 0 bytes", __FUNCTION__); + dbg("%s - write request of 0 bytes", __func__); return (0); } spin_lock_bh(&wport->lock); if (wport->write_urb_busy) { spin_unlock_bh(&wport->lock); - dbg("%s - already writing", __FUNCTION__); + dbg("%s - already writing", __func__); return 0; } wport->write_urb_busy = 1; @@ -268,7 +268,7 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf memcpy (wport->write_urb->transfer_buffer + OMNINET_DATAOFFSET, buf, count); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, wport->write_urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, wport->write_urb->transfer_buffer); header->oh_seq = od->od_outseq++; header->oh_len = count; @@ -282,7 +282,7 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf result = usb_submit_urb(wport->write_urb, GFP_ATOMIC); if (result) { wport->write_urb_busy = 0; - err("%s - failed submitting write urb, error %d", __FUNCTION__, result); + err("%s - failed submitting write urb, error %d", __func__, result); } else result = count; @@ -300,7 +300,7 @@ static int omninet_write_room (struct usb_serial_port *port) if (wport->write_urb_busy) room = wport->bulk_out_size - OMNINET_HEADERLEN; - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return (room); } @@ -311,12 +311,12 @@ static void omninet_write_bulk_callback (struct urb *urb) struct usb_serial_port *port = (struct usb_serial_port *) urb->context; int status = urb->status; - dbg("%s - port %0x\n", __FUNCTION__, port->number); + dbg("%s - port %0x\n", __func__, port->number); port->write_urb_busy = 0; if (status) { dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } @@ -328,7 +328,7 @@ static void omninet_shutdown (struct usb_serial *serial) { struct usb_serial_port *wport = serial->port[1]; struct usb_serial_port *port = serial->port[0]; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); usb_kill_urb(wport->write_urb); kfree(usb_get_serial_port_data(port)); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f4914209871d..920241897c95 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -408,24 +408,24 @@ module_exit(option_exit); static void option_rx_throttle(struct usb_serial_port *port) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static void option_rx_unthrottle(struct usb_serial_port *port) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static void option_break_ctl(struct usb_serial_port *port, int break_state) { /* Unfortunately, I don't know how to send a break */ - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static void option_set_termios(struct usb_serial_port *port, struct ktermios *old_termios) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Doesn't support option setting */ tty_termios_copy_hw(port->tty->termios, old_termios); option_send_setup(port); @@ -486,7 +486,7 @@ static int option_write(struct usb_serial_port *port, portdata = usb_get_serial_port_data(port); - dbg("%s: write (%d chars)", __FUNCTION__, count); + dbg("%s: write (%d chars)", __func__, count); i = 0; left = count; @@ -507,7 +507,7 @@ static int option_write(struct usb_serial_port *port, dbg("usb_write %p failed (err=%d)", this_urb, this_urb->status); - dbg("%s: endpoint %d buf %d", __FUNCTION__, + dbg("%s: endpoint %d buf %d", __func__, usb_pipeendpoint(this_urb->pipe), i); /* send the data */ @@ -529,7 +529,7 @@ static int option_write(struct usb_serial_port *port, } count -= left; - dbg("%s: wrote (did %d)", __FUNCTION__, count); + dbg("%s: wrote (did %d)", __func__, count); return count; } @@ -542,14 +542,14 @@ static void option_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg("%s: %p", __FUNCTION__, urb); + dbg("%s: %p", __func__, urb); endpoint = usb_pipeendpoint(urb->pipe); port = (struct usb_serial_port *) urb->context; if (status) { dbg("%s: nonzero status: %d on endpoint %02x.", - __FUNCTION__, status, endpoint); + __func__, status, endpoint); } else { tty = port->tty; if (urb->actual_length) { @@ -557,7 +557,7 @@ static void option_indat_callback(struct urb *urb) tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } else { - dbg("%s: empty read urb received", __FUNCTION__); + dbg("%s: empty read urb received", __func__); } /* Resubmit urb so we continue receiving */ @@ -565,7 +565,7 @@ static void option_indat_callback(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err) printk(KERN_ERR "%s: resubmit read urb failed. " - "(%d)", __FUNCTION__, err); + "(%d)", __func__, err); } } return; @@ -577,7 +577,7 @@ static void option_outdat_callback(struct urb *urb) struct option_port_private *portdata; int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); port = (struct usb_serial_port *) urb->context; @@ -601,15 +601,15 @@ static void option_instat_callback(struct urb *urb) struct option_port_private *portdata = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; - dbg("%s", __FUNCTION__); - dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata); + dbg("%s", __func__); + dbg("%s: urb %p port %p has data %p", __func__,urb,port,portdata); if (status == 0) { struct usb_ctrlrequest *req_pkt = (struct usb_ctrlrequest *)urb->transfer_buffer; if (!req_pkt) { - dbg("%s: NULL req_pkt\n", __FUNCTION__); + dbg("%s: NULL req_pkt\n", __func__); return; } if ((req_pkt->bRequestType == 0xA1) && @@ -619,7 +619,7 @@ static void option_instat_callback(struct urb *urb) urb->transfer_buffer + sizeof(struct usb_ctrlrequest)); - dbg("%s: signal x%x", __FUNCTION__, signals); + dbg("%s: signal x%x", __func__, signals); old_dcd_state = portdata->dcd_state; portdata->cts_state = 1; @@ -631,11 +631,11 @@ static void option_instat_callback(struct urb *urb) old_dcd_state && !portdata->dcd_state) tty_hangup(port->tty); } else { - dbg("%s: type %x req %x", __FUNCTION__, + dbg("%s: type %x req %x", __func__, req_pkt->bRequestType,req_pkt->bRequest); } } else - dbg("%s: error %d", __FUNCTION__, status); + dbg("%s: error %d", __func__, status); /* Resubmit urb so we continue receiving IRQ data */ if (status != -ESHUTDOWN) { @@ -643,7 +643,7 @@ static void option_instat_callback(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err) dbg("%s: resubmit intr urb failed. (%d)", - __FUNCTION__, err); + __func__, err); } } @@ -662,7 +662,7 @@ static int option_write_room(struct usb_serial_port *port) data_len += OUT_BUFLEN; } - dbg("%s: %d", __FUNCTION__, data_len); + dbg("%s: %d", __func__, data_len); return data_len; } @@ -680,7 +680,7 @@ static int option_chars_in_buffer(struct usb_serial_port *port) if (this_urb && test_bit(i, &portdata->out_busy)) data_len += this_urb->transfer_buffer_length; } - dbg("%s: %d", __FUNCTION__, data_len); + dbg("%s: %d", __func__, data_len); return data_len; } @@ -693,7 +693,7 @@ static int option_open(struct usb_serial_port *port, struct file *filp) portdata = usb_get_serial_port_data(port); - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Set some sane defaults */ portdata->rts_state = 1; @@ -705,7 +705,7 @@ static int option_open(struct usb_serial_port *port, struct file *filp) if (! urb) continue; if (urb->dev != serial->dev) { - dbg("%s: dev %p != %p", __FUNCTION__, + dbg("%s: dev %p != %p", __func__, urb->dev, serial->dev); continue; } @@ -719,7 +719,7 @@ static int option_open(struct usb_serial_port *port, struct file *filp) err = usb_submit_urb(urb, GFP_KERNEL); if (err) { dbg("%s: submit urb %d failed (%d) %d", - __FUNCTION__, i, err, + __func__, i, err, urb->transfer_buffer_length); } } @@ -747,7 +747,7 @@ static void option_close(struct usb_serial_port *port, struct file *filp) struct usb_serial *serial = port->serial; struct option_port_private *portdata; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); portdata = usb_get_serial_port_data(port); portdata->rts_state = 0; @@ -780,7 +780,7 @@ static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint, urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { - dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint); + dbg("%s: alloc for endpoint %d failed.", __func__, endpoint); return NULL; } @@ -799,7 +799,7 @@ static void option_setup_urbs(struct usb_serial *serial) struct usb_serial_port *port; struct option_port_private *portdata; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; @@ -832,7 +832,7 @@ static int option_send_setup(struct usb_serial_port *port) struct usb_serial *serial = port->serial; struct option_port_private *portdata; int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); portdata = usb_get_serial_port_data(port); @@ -858,7 +858,7 @@ static int option_startup(struct usb_serial *serial) struct option_port_private *portdata; u8 *buffer; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Now setup per port private data */ for (i = 0; i < serial->num_ports; i++) { @@ -866,7 +866,7 @@ static int option_startup(struct usb_serial *serial) portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); if (!portdata) { dbg("%s: kmalloc for option_port_private (%d) failed!.", - __FUNCTION__, i); + __func__, i); return (1); } @@ -891,7 +891,7 @@ static int option_startup(struct usb_serial *serial) err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (err) dbg("%s: submit irq_in urb failed %d", - __FUNCTION__, err); + __func__, err); } option_setup_urbs(serial); @@ -915,7 +915,7 @@ static void option_shutdown(struct usb_serial *serial) struct usb_serial_port *port; struct option_port_private *portdata; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Stop reading/writing urbs */ for (i = 0; i < serial->num_ports; ++i) { diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 20a680ed0cc7..87f33e06301c 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -235,10 +235,10 @@ static void setup_line(struct work_struct *work) unsigned long flags; int result; - dbg("%s(port = %d)", __FUNCTION__, port->number); + dbg("%s(port = %d)", __func__, port->number); if ((new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) { - dev_err(&port->dev, "%s(): out of memory!\n", __FUNCTION__); + dev_err(&port->dev, "%s(): out of memory!\n", __func__); /* we will try again */ schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2)); return; @@ -253,7 +253,7 @@ static void setup_line(struct work_struct *work) 100); if (result != OTI6858_CTRL_PKT_SIZE) { - dev_err(&port->dev, "%s(): error reading status\n", __FUNCTION__); + dev_err(&port->dev, "%s(): error reading status\n", __func__); kfree(new_setup); /* we will try again */ schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2)); @@ -286,12 +286,12 @@ static void setup_line(struct work_struct *work) priv->setup_done = 1; spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s(): submitting interrupt urb", __FUNCTION__); + dbg("%s(): submitting interrupt urb", __func__); port->interrupt_in_urb->dev = port->serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed" - " with error %d\n", __FUNCTION__, result); + " with error %d\n", __func__, result); } } @@ -303,7 +303,7 @@ void send_data(struct work_struct *work) unsigned long flags; unsigned char allow; - dbg("%s(port = %d)", __FUNCTION__, port->number); + dbg("%s(port = %d)", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); if (priv->flags.write_urb_in_use) { @@ -331,12 +331,12 @@ void send_data(struct work_struct *work) if (count == 0) { priv->flags.write_urb_in_use = 0; - dbg("%s(): submitting interrupt urb", __FUNCTION__); + dbg("%s(): submitting interrupt urb", __func__); port->interrupt_in_urb->dev = port->serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed" - " with error %d\n", __FUNCTION__, result); + " with error %d\n", __func__, result); } return; } @@ -350,7 +350,7 @@ void send_data(struct work_struct *work) result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed" - " with error %d\n", __FUNCTION__, result); + " with error %d\n", __func__, result); priv->flags.write_urb_in_use = 0; } @@ -401,7 +401,7 @@ static int oti6858_write(struct usb_serial_port *port, struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s(port = %d, count = %d)", __FUNCTION__, port->number, count); + dbg("%s(port = %d, count = %d)", __func__, port->number, count); if (!count) return count; @@ -419,7 +419,7 @@ static int oti6858_write_room(struct usb_serial_port *port) int room = 0; unsigned long flags; - dbg("%s(port = %d)", __FUNCTION__, port->number); + dbg("%s(port = %d)", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); room = oti6858_buf_space_avail(priv->buf); @@ -434,7 +434,7 @@ static int oti6858_chars_in_buffer(struct usb_serial_port *port) int chars = 0; unsigned long flags; - dbg("%s(port = %d)", __FUNCTION__, port->number); + dbg("%s(port = %d)", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); chars = oti6858_buf_data_avail(priv->buf); @@ -453,10 +453,10 @@ static void oti6858_set_termios(struct usb_serial_port *port, u16 divisor; int br; - dbg("%s(port = %d)", __FUNCTION__, port->number); + dbg("%s(port = %d)", __func__, port->number); if (!port->tty || !port->tty->termios) { - dbg("%s(): no tty structures", __FUNCTION__); + dbg("%s(): no tty structures", __func__); return; } @@ -572,7 +572,7 @@ static int oti6858_open(struct usb_serial_port *port, struct file *filp) unsigned long flags; int result; - dbg("%s(port = %d)", __FUNCTION__, port->number); + dbg("%s(port = %d)", __func__, port->number); usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); @@ -581,7 +581,7 @@ static int oti6858_open(struct usb_serial_port *port, struct file *filp) return 0; if ((buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) { - dev_err(&port->dev, "%s(): out of memory!\n", __FUNCTION__); + dev_err(&port->dev, "%s(): out of memory!\n", __func__); return -ENOMEM; } @@ -610,12 +610,12 @@ static int oti6858_open(struct usb_serial_port *port, struct file *filp) spin_unlock_irqrestore(&priv->lock, flags); kfree(buf); - dbg("%s(): submitting interrupt urb", __FUNCTION__); + dbg("%s(): submitting interrupt urb", __func__); port->interrupt_in_urb->dev = serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed" - " with error %d\n", __FUNCTION__, result); + " with error %d\n", __func__, result); oti6858_close(port, NULL); return -EPROTO; } @@ -634,14 +634,14 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp) long timeout; wait_queue_t wait; - dbg("%s(port = %d)", __FUNCTION__, port->number); + dbg("%s(port = %d)", __func__, port->number); /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */ init_waitqueue_entry(&wait, current); add_wait_queue(&port->tty->write_wait, &wait); - dbg("%s(): entering wait loop", __FUNCTION__); + dbg("%s(): entering wait loop", __func__); for (;;) { set_current_state(TASK_INTERRUPTIBLE); if (oti6858_buf_data_avail(priv->buf) == 0 @@ -654,7 +654,7 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp) } set_current_state(TASK_RUNNING); remove_wait_queue(&port->tty->write_wait, &wait); - dbg("%s(): after wait loop", __FUNCTION__); + dbg("%s(): after wait loop", __func__); /* clear out any remaining data in the buffer */ oti6858_buf_clear(priv->buf); @@ -675,7 +675,7 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp) */ timeout = 2*HZ; schedule_timeout_interruptible(timeout); - dbg("%s(): after schedule_timeout_interruptible()", __FUNCTION__); + dbg("%s(): after schedule_timeout_interruptible()", __func__); /* cancel scheduled setup */ cancel_delayed_work(&priv->delayed_setup_work); @@ -683,7 +683,7 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp) flush_scheduled_work(); /* shutdown our urbs */ - dbg("%s(): shutting down urbs", __FUNCTION__); + dbg("%s(): shutting down urbs", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); @@ -706,7 +706,7 @@ static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file, u8 control; dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)", - __FUNCTION__, port->number, set, clear); + __func__, port->number, set, clear); if (!usb_get_intfdata(port->serial->interface)) return -ENODEV; @@ -738,7 +738,7 @@ static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file) unsigned pin_state; unsigned result = 0; - dbg("%s(port = %d)", __FUNCTION__, port->number); + dbg("%s(port = %d)", __func__, port->number); if (!usb_get_intfdata(port->serial->interface)) return -ENODEV; @@ -761,7 +761,7 @@ static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file) if ((pin_state & PIN_DCD) != 0) result |= TIOCM_CD; - dbg("%s() = 0x%08x", __FUNCTION__, result); + dbg("%s() = 0x%08x", __func__, result); return result; } @@ -808,7 +808,7 @@ static int oti6858_ioctl(struct usb_serial_port *port, struct file *file, unsigned int x; dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)", - __FUNCTION__, port->number, cmd, arg); + __func__, port->number, cmd, arg); switch (cmd) { case TIOCMBIS: @@ -822,11 +822,11 @@ static int oti6858_ioctl(struct usb_serial_port *port, struct file *file, return oti6858_tiocmset(port, NULL, 0, x); case TIOCMIWAIT: - dbg("%s(): TIOCMIWAIT", __FUNCTION__); + dbg("%s(): TIOCMIWAIT", __func__); return wait_modem_info(port, arg); default: - dbg("%s(): 0x%04x not supported", __FUNCTION__, cmd); + dbg("%s(): 0x%04x not supported", __func__, cmd); break; } @@ -837,10 +837,10 @@ static void oti6858_break_ctl(struct usb_serial_port *port, int break_state) { int state; - dbg("%s(port = %d)", __FUNCTION__, port->number); + dbg("%s(port = %d)", __func__, port->number); state = (break_state == 0) ? 0 : 1; - dbg("%s(): turning break %s", __FUNCTION__, state ? "on" : "off"); + dbg("%s(): turning break %s", __func__, state ? "on" : "off"); /* FIXME */ /* @@ -848,7 +848,7 @@ static void oti6858_break_ctl(struct usb_serial_port *port, int break_state) BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 0, NULL, 0, 100); if (result != 0) - dbg("%s(): error sending break", __FUNCTION__); + dbg("%s(): error sending break", __func__); */ } @@ -857,7 +857,7 @@ static void oti6858_shutdown(struct usb_serial *serial) struct oti6858_private *priv; int i; - dbg("%s()", __FUNCTION__); + dbg("%s()", __func__); for (i = 0; i < serial->num_ports; ++i) { priv = usb_get_serial_port_data(serial->port[i]); @@ -877,7 +877,7 @@ static void oti6858_read_int_callback(struct urb *urb) int status = urb->status; dbg("%s(port = %d, status = %d)", - __FUNCTION__, port->number, status); + __func__, port->number, status); switch (status) { case 0: @@ -888,11 +888,11 @@ static void oti6858_read_int_callback(struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s(): urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dbg("%s(): nonzero urb status received: %d", - __FUNCTION__, status); + __func__, status); break; } @@ -909,7 +909,7 @@ static void oti6858_read_int_callback(struct urb *urb) priv->setup_done = 0; resubmit = 0; dbg("%s(): scheduling setup_line()", - __FUNCTION__); + __func__); schedule_delayed_work(&priv->delayed_setup_work, 0); } } @@ -924,7 +924,7 @@ static void oti6858_read_int_callback(struct urb *urb) priv->setup_done = 0; resubmit = 0; dbg("%s(): scheduling setup_line()", - __FUNCTION__); + __func__); schedule_delayed_work(&priv->delayed_setup_work, 0); } } @@ -953,7 +953,7 @@ static void oti6858_read_int_callback(struct urb *urb) if (result != 0) { priv->flags.read_urb_in_use = 0; dev_err(&port->dev, "%s(): usb_submit_urb() failed," - " error %d\n", __FUNCTION__, result); + " error %d\n", __func__, result); } else { resubmit = 0; } @@ -972,13 +972,13 @@ static void oti6858_read_int_callback(struct urb *urb) if (resubmit) { int result; -// dbg("%s(): submitting interrupt urb", __FUNCTION__); +// dbg("%s(): submitting interrupt urb", __func__); urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result != 0) { dev_err(&urb->dev->dev, "%s(): usb_submit_urb() failed with" - " error %d\n", __FUNCTION__, result); + " error %d\n", __func__, result); } } } @@ -994,7 +994,7 @@ static void oti6858_read_bulk_callback(struct urb *urb) int result; dbg("%s(port = %d, status = %d)", - __FUNCTION__, port->number, status); + __func__, port->number, status); spin_lock_irqsave(&priv->lock, flags); priv->flags.read_urb_in_use = 0; @@ -1002,20 +1002,20 @@ static void oti6858_read_bulk_callback(struct urb *urb) if (status != 0) { if (!port->open_count) { - dbg("%s(): port is closed, exiting", __FUNCTION__); + dbg("%s(): port is closed, exiting", __func__); return; } /* if (status == -EPROTO) { // PL2303 mysteriously fails with -EPROTO reschedule the read - dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__); + dbg("%s - caught -EPROTO, resubmitting the urb", __func__); result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); return; } */ - dbg("%s(): unable to handle the error, exiting", __FUNCTION__); + dbg("%s(): unable to handle the error, exiting", __func__); return; } @@ -1031,7 +1031,7 @@ static void oti6858_read_bulk_callback(struct urb *urb) result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed," - " error %d\n", __FUNCTION__, result); + " error %d\n", __func__, result); } } } @@ -1044,7 +1044,7 @@ static void oti6858_write_bulk_callback(struct urb *urb) int result; dbg("%s(port = %d, status = %d)", - __FUNCTION__, port->number, status); + __func__, port->number, status); switch (status) { case 0: @@ -1055,21 +1055,21 @@ static void oti6858_write_bulk_callback(struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s(): urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); priv->flags.write_urb_in_use = 0; return; default: /* error in the urb, so we have to resubmit it */ dbg("%s(): nonzero write bulk status received: %d", - __FUNCTION__, status); - dbg("%s(): overflow in write", __FUNCTION__); + __func__, status); + dbg("%s(): overflow in write", __func__); port->write_urb->transfer_buffer_length = 1; port->write_urb->dev = port->serial->dev; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { dev_err(&port->dev, "%s(): usb_submit_urb() failed," - " error %d\n", __FUNCTION__, result); + " error %d\n", __func__, result); } else { return; } @@ -1079,11 +1079,11 @@ static void oti6858_write_bulk_callback(struct urb *urb) // schedule the interrupt urb if we are still open */ port->interrupt_in_urb->dev = port->serial->dev; - dbg("%s(): submitting interrupt urb", __FUNCTION__); + dbg("%s(): submitting interrupt urb", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result != 0) { dev_err(&port->dev, "%s(): failed submitting int urb," - " error %d\n", __FUNCTION__, result); + " error %d\n", __func__, result); } } diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 1fbb4dbdf23d..2b4ab371c762 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -410,7 +410,7 @@ static int set_control_lines(struct usb_device *dev, u8 value) retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, value, 0, NULL, 0, 100); - dbg("%s - value = %d, retval = %d", __FUNCTION__, value, retval); + dbg("%s - value = %d, retval = %d", __func__, value, retval); return retval; } @@ -420,7 +420,7 @@ static void pl2303_send(struct usb_serial_port *port) struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); @@ -441,7 +441,7 @@ static void pl2303_send(struct usb_serial_port *port) spin_unlock_irqrestore(&priv->lock, flags); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, + usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer); port->write_urb->transfer_buffer_length = count; @@ -449,7 +449,7 @@ static void pl2303_send(struct usb_serial_port *port) result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { dev_err(&port->dev, "%s - failed submitting write urb," - " error %d\n", __FUNCTION__, result); + " error %d\n", __func__, result); priv->write_urb_in_use = 0; // TODO: reschedule pl2303_send } @@ -463,7 +463,7 @@ static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf, struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count); + dbg("%s - port %d, %d bytes", __func__, port->number, count); if (!count) return count; @@ -483,13 +483,13 @@ static int pl2303_write_room(struct usb_serial_port *port) int room = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); room = pl2303_buf_space_avail(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return room; } @@ -499,13 +499,13 @@ static int pl2303_chars_in_buffer(struct usb_serial_port *port) int chars = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); chars = pl2303_buf_data_avail(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - returns %d", __FUNCTION__, chars); + dbg("%s - returns %d", __func__, chars); return chars; } @@ -521,7 +521,7 @@ static void pl2303_set_termios(struct usb_serial_port *port, int i; u8 control; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { @@ -545,7 +545,7 @@ static void pl2303_set_termios(struct usb_serial_port *port, buf = kzalloc(7, GFP_KERNEL); if (!buf) { - dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__); + dev_err(&port->dev, "%s - out of memory.\n", __func__); return; } @@ -563,11 +563,11 @@ static void pl2303_set_termios(struct usb_serial_port *port, default: case CS8: buf[6] = 8; break; } - dbg("%s - data bits = %d", __FUNCTION__, buf[6]); + dbg("%s - data bits = %d", __func__, buf[6]); } baud = tty_get_baud_rate(port->tty);; - dbg("%s - baud = %d", __FUNCTION__, baud); + dbg("%s - baud = %d", __func__, baud); if (baud) { buf[0] = baud & 0xff; buf[1] = (baud >> 8) & 0xff; @@ -580,10 +580,10 @@ static void pl2303_set_termios(struct usb_serial_port *port, /* For reference buf[4]=2 is 2 stop bits */ if (cflag & CSTOPB) { buf[4] = 2; - dbg("%s - stop bits = 2", __FUNCTION__); + dbg("%s - stop bits = 2", __func__); } else { buf[4] = 0; - dbg("%s - stop bits = 1", __FUNCTION__); + dbg("%s - stop bits = 1", __func__); } if (cflag & PARENB) { @@ -594,14 +594,14 @@ static void pl2303_set_termios(struct usb_serial_port *port, /* For reference buf[5]=4 is space parity */ if (cflag & PARODD) { buf[5] = 1; - dbg("%s - parity = odd", __FUNCTION__); + dbg("%s - parity = odd", __func__); } else { buf[5] = 2; - dbg("%s - parity = even", __FUNCTION__); + dbg("%s - parity = even", __func__); } } else { buf[5] = 0; - dbg("%s - parity = none", __FUNCTION__); + dbg("%s - parity = none", __func__); } i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), @@ -657,7 +657,7 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp) long timeout; wait_queue_t wait; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); @@ -695,7 +695,7 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp) schedule_timeout_interruptible(timeout); /* shutdown our urbs */ - dbg("%s - shutting down urbs", __FUNCTION__); + dbg("%s - shutting down urbs", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); @@ -719,7 +719,7 @@ static int pl2303_open(struct usb_serial_port *port, struct file *filp) struct pl2303_private *priv = usb_get_serial_port_data(port); int result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (priv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); @@ -737,22 +737,22 @@ static int pl2303_open(struct usb_serial_port *port, struct file *filp) //FIXME: need to assert RTS and DTR if CRTSCTS off - dbg("%s - submitting read urb", __FUNCTION__); + dbg("%s - submitting read urb", __func__); port->read_urb->dev = serial->dev; result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting read urb," - " error %d\n", __FUNCTION__, result); + " error %d\n", __func__, result); pl2303_close(port, NULL); return -EPROTO; } - dbg("%s - submitting interrupt urb", __FUNCTION__); + dbg("%s - submitting interrupt urb", __func__); port->interrupt_in_urb->dev = serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," - " error %d\n", __FUNCTION__, result); + " error %d\n", __func__, result); pl2303_close(port, NULL); return -EPROTO; } @@ -792,7 +792,7 @@ static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file) unsigned int status; unsigned int result; - dbg("%s (%d)", __FUNCTION__, port->number); + dbg("%s (%d)", __func__, port->number); if (!usb_get_intfdata(port->serial->interface)) return -ENODEV; @@ -809,7 +809,7 @@ static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file) | ((status & UART_RING) ? TIOCM_RI : 0) | ((status & UART_DCD) ? TIOCM_CD : 0); - dbg("%s - result = %x", __FUNCTION__, result); + dbg("%s - result = %x", __func__, result); return result; } @@ -853,15 +853,15 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) static int pl2303_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg) { - dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd); + dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); switch (cmd) { case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number); + dbg("%s (%d) TIOCMIWAIT", __func__, port->number); return wait_modem_info(port, arg); default: - dbg("%s not supported = 0x%04x", __FUNCTION__, cmd); + dbg("%s not supported = 0x%04x", __func__, cmd); break; } @@ -874,19 +874,19 @@ static void pl2303_break_ctl(struct usb_serial_port *port, int break_state) u16 state; int result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (break_state == 0) state = BREAK_OFF; else state = BREAK_ON; - dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on"); + dbg("%s - turning break %s", __func__, state==BREAK_OFF ? "off" : "on"); result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 0, NULL, 0, 100); if (result) - dbg("%s - error sending break = %d", __FUNCTION__, result); + dbg("%s - error sending break = %d", __func__, result); } static void pl2303_shutdown(struct usb_serial *serial) @@ -894,7 +894,7 @@ static void pl2303_shutdown(struct usb_serial *serial) int i; struct pl2303_private *priv; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); for (i = 0; i < serial->num_ports; ++i) { priv = usb_get_serial_port_data(serial->port[i]); @@ -949,7 +949,7 @@ static void pl2303_read_int_callback(struct urb *urb) int status = urb->status; int retval; - dbg("%s (%d)", __FUNCTION__, port->number); + dbg("%s (%d)", __func__, port->number); switch (status) { case 0: @@ -959,16 +959,16 @@ static void pl2303_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, + dbg("%s - urb shutting down with status: %d", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, + dbg("%s - nonzero urb status received: %d", __func__, status); goto exit; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, urb->transfer_buffer); pl2303_update_line_status(port, data, actual_length); @@ -978,7 +978,7 @@ exit: if (retval) dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n", - __FUNCTION__, retval); + __func__, retval); } static void pl2303_read_bulk_callback(struct urb *urb) @@ -994,32 +994,32 @@ static void pl2303_read_bulk_callback(struct urb *urb) u8 line_status; char tty_flag; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { - dbg("%s - urb status = %d", __FUNCTION__, status); + dbg("%s - urb status = %d", __func__, status); if (!port->open_count) { - dbg("%s - port is closed, exiting.", __FUNCTION__); + dbg("%s - port is closed, exiting.", __func__); return; } if (status == -EPROTO) { /* PL2303 mysteriously fails with -EPROTO reschedule * the read */ dbg("%s - caught -EPROTO, resubmitting the urb", - __FUNCTION__); + __func__); urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - failed" " resubmitting read urb, error %d\n", - __FUNCTION__, result); + __func__, result); return; } - dbg("%s - unable to handle the error, exiting.", __FUNCTION__); + dbg("%s - unable to handle the error, exiting.", __func__); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); /* get tty_flag from status */ @@ -1039,7 +1039,7 @@ static void pl2303_read_bulk_callback(struct urb *urb) tty_flag = TTY_PARITY; else if (line_status & UART_FRAME_ERROR) tty_flag = TTY_FRAME; - dbg("%s - tty_flag = %d", __FUNCTION__, tty_flag); + dbg("%s - tty_flag = %d", __func__, tty_flag); tty = port->tty; if (tty && urb->actual_length) { @@ -1058,7 +1058,7 @@ static void pl2303_read_bulk_callback(struct urb *urb) result = usb_submit_urb(urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - failed resubmitting" - " read urb, error %d\n", __FUNCTION__, result); + " read urb, error %d\n", __func__, result); } return; @@ -1071,7 +1071,7 @@ static void pl2303_write_bulk_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); switch (status) { case 0: @@ -1081,21 +1081,21 @@ static void pl2303_write_bulk_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, + dbg("%s - urb shutting down with status: %d", __func__, status); priv->write_urb_in_use = 0; return; default: /* error in the urb, so we have to resubmit it */ - dbg("%s - Overflow in write", __FUNCTION__); - dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, + dbg("%s - Overflow in write", __func__); + dbg("%s - nonzero write bulk status received: %d", __func__, status); port->write_urb->transfer_buffer_length = 1; port->write_urb->dev = port->serial->dev; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - failed resubmitting write" - " urb, error %d\n", __FUNCTION__, result); + " urb, error %d\n", __func__, result); else return; } diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 353c54fa0580..3fe98a52b914 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -202,11 +202,11 @@ static void safe_read_bulk_callback (struct urb *urb) int result; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } @@ -232,18 +232,18 @@ static void safe_read_bulk_callback (struct urb *urb) if (actual_length <= (length - 2)) { - info ("%s - actual: %d", __FUNCTION__, actual_length); + info ("%s - actual: %d", __func__, actual_length); for (i = 0; i < actual_length; i++) { tty_insert_flip_char (port->tty, data[i], 0); } tty_flip_buffer_push (port->tty); } else { - err ("%s - inconsistent lengths %d:%d", __FUNCTION__, + err ("%s - inconsistent lengths %d:%d", __func__, actual_length, length); } } else { - err ("%s - bad CRC %x", __FUNCTION__, fcs); + err ("%s - bad CRC %x", __func__, fcs); } } else { for (i = 0; i < length; i++) { @@ -259,7 +259,7 @@ static void safe_read_bulk_callback (struct urb *urb) safe_read_bulk_callback, port); if ((result = usb_submit_urb (urb, GFP_ATOMIC))) { - err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); + err ("%s - failed resubmitting read urb, error %d", __func__, result); } } @@ -274,7 +274,7 @@ static int safe_write (struct usb_serial_port *port, const unsigned char *buf, i count); if (!port->write_urb) { - dbg ("%s - write urb NULL", __FUNCTION__); + dbg ("%s - write urb NULL", __func__); return (0); } @@ -282,17 +282,17 @@ static int safe_write (struct usb_serial_port *port, const unsigned char *buf, i port->write_urb->transfer_buffer_length); if (!port->write_urb->transfer_buffer_length) { - dbg ("%s - write urb transfer_buffer_length zero", __FUNCTION__); + dbg ("%s - write urb transfer_buffer_length zero", __func__); return (0); } if (count == 0) { - dbg ("%s - write request of 0 bytes", __FUNCTION__); + dbg ("%s - write request of 0 bytes", __func__); return (0); } spin_lock_bh(&port->lock); if (port->write_urb_busy) { spin_unlock_bh(&port->lock); - dbg("%s - already writing", __FUNCTION__); + dbg("%s - already writing", __func__); return 0; } port->write_urb_busy = 1; @@ -332,7 +332,7 @@ static int safe_write (struct usb_serial_port *port, const unsigned char *buf, i port->write_urb->transfer_buffer_length = count; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer); #ifdef ECHO_TX { int i; @@ -349,10 +349,10 @@ static int safe_write (struct usb_serial_port *port, const unsigned char *buf, i port->write_urb->dev = port->serial->dev; if ((result = usb_submit_urb (port->write_urb, GFP_KERNEL))) { port->write_urb_busy = 0; - err ("%s - failed submitting write urb, error %d", __FUNCTION__, result); + err ("%s - failed submitting write urb, error %d", __func__, result); return 0; } - dbg ("%s urb: %p submitted", __FUNCTION__, port->write_urb); + dbg ("%s urb: %p submitted", __func__, port->write_urb); return (count); } @@ -361,7 +361,7 @@ static int safe_write_room (struct usb_serial_port *port) { int room = 0; // Default: no room - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); if (port->write_urb_busy) room = port->bulk_out_size - (safe ? 2 : 0); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 07eabaf9f044..ed30adefff85 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -256,7 +256,7 @@ static int sierra_send_setup(struct usb_serial_port *port) struct sierra_port_private *portdata; __u16 interface = 0; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); portdata = usb_get_serial_port_data(port); @@ -286,24 +286,24 @@ static int sierra_send_setup(struct usb_serial_port *port) static void sierra_rx_throttle(struct usb_serial_port *port) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static void sierra_rx_unthrottle(struct usb_serial_port *port) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static void sierra_break_ctl(struct usb_serial_port *port, int break_state) { /* Unfortunately, I don't know how to send a break */ - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static void sierra_set_termios(struct usb_serial_port *port, struct ktermios *old_termios) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); tty_termios_copy_hw(port->tty->termios, old_termios); sierra_send_setup(port); } @@ -357,14 +357,14 @@ static void sierra_outdat_callback(struct urb *urb) int status = urb->status; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree(urb->transfer_buffer); if (status) dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); spin_lock_irqsave(&portdata->lock, flags); --portdata->outstanding_urbs; @@ -386,12 +386,12 @@ static int sierra_write(struct usb_serial_port *port, portdata = usb_get_serial_port_data(port); - dbg("%s: write (%d chars)", __FUNCTION__, count); + dbg("%s: write (%d chars)", __func__, count); spin_lock_irqsave(&portdata->lock, flags); if (portdata->outstanding_urbs > N_OUT_URB) { spin_unlock_irqrestore(&portdata->lock, flags); - dbg("%s - write limit hit\n", __FUNCTION__); + dbg("%s - write limit hit\n", __func__); return 0; } portdata->outstanding_urbs++; @@ -413,7 +413,7 @@ static int sierra_write(struct usb_serial_port *port, memcpy(buffer, buf, count); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); usb_fill_bulk_urb(urb, serial->dev, usb_sndbulkpipe(serial->dev, @@ -424,7 +424,7 @@ static int sierra_write(struct usb_serial_port *port, status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " - "with status = %d\n", __FUNCTION__, status); + "with status = %d\n", __func__, status); count = status; goto error; } @@ -454,14 +454,14 @@ static void sierra_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg("%s: %p", __FUNCTION__, urb); + dbg("%s: %p", __func__, urb); endpoint = usb_pipeendpoint(urb->pipe); port = (struct usb_serial_port *) urb->context; if (status) { dbg("%s: nonzero status: %d on endpoint %02x.", - __FUNCTION__, status, endpoint); + __func__, status, endpoint); } else { tty = port->tty; if (urb->actual_length) { @@ -469,7 +469,7 @@ static void sierra_indat_callback(struct urb *urb) tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } else { - dbg("%s: empty read urb received", __FUNCTION__); + dbg("%s: empty read urb received", __func__); } /* Resubmit urb so we continue receiving */ @@ -491,15 +491,15 @@ static void sierra_instat_callback(struct urb *urb) struct sierra_port_private *portdata = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; - dbg("%s", __FUNCTION__); - dbg("%s: urb %p port %p has data %p", __FUNCTION__, urb, port, portdata); + dbg("%s", __func__); + dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata); if (status == 0) { struct usb_ctrlrequest *req_pkt = (struct usb_ctrlrequest *)urb->transfer_buffer; if (!req_pkt) { - dbg("%s: NULL req_pkt\n", __FUNCTION__); + dbg("%s: NULL req_pkt\n", __func__); return; } if ((req_pkt->bRequestType == 0xA1) && @@ -509,7 +509,7 @@ static void sierra_instat_callback(struct urb *urb) urb->transfer_buffer + sizeof(struct usb_ctrlrequest)); - dbg("%s: signal x%x", __FUNCTION__, signals); + dbg("%s: signal x%x", __func__, signals); old_dcd_state = portdata->dcd_state; portdata->cts_state = 1; @@ -521,11 +521,11 @@ static void sierra_instat_callback(struct urb *urb) old_dcd_state && !portdata->dcd_state) tty_hangup(port->tty); } else { - dbg("%s: type %x req %x", __FUNCTION__, + dbg("%s: type %x req %x", __func__, req_pkt->bRequestType, req_pkt->bRequest); } } else - dbg("%s: error %d", __FUNCTION__, status); + dbg("%s: error %d", __func__, status); /* Resubmit urb so we continue receiving IRQ data */ if (status != -ESHUTDOWN) { @@ -533,7 +533,7 @@ static void sierra_instat_callback(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err) dbg("%s: resubmit intr urb failed. (%d)", - __FUNCTION__, err); + __func__, err); } } @@ -542,14 +542,14 @@ static int sierra_write_room(struct usb_serial_port *port) struct sierra_port_private *portdata = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* try to give a good number back based on if we have any free urbs at * this point in time */ spin_lock_irqsave(&portdata->lock, flags); if (portdata->outstanding_urbs > N_OUT_URB * 2 / 3) { spin_unlock_irqrestore(&portdata->lock, flags); - dbg("%s - write limit hit\n", __FUNCTION__); + dbg("%s - write limit hit\n", __func__); return 0; } spin_unlock_irqrestore(&portdata->lock, flags); @@ -559,7 +559,7 @@ static int sierra_write_room(struct usb_serial_port *port) static int sierra_chars_in_buffer(struct usb_serial_port *port) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* * We can't really account for how much data we @@ -580,7 +580,7 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp) portdata = usb_get_serial_port_data(port); - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Set some sane defaults */ portdata->rts_state = 1; @@ -592,7 +592,7 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp) if (!urb) continue; if (urb->dev != serial->dev) { - dbg("%s: dev %p != %p", __FUNCTION__, + dbg("%s: dev %p != %p", __func__, urb->dev, serial->dev); continue; } @@ -630,7 +630,7 @@ static void sierra_close(struct usb_serial_port *port, struct file *filp) struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); portdata = usb_get_serial_port_data(port); portdata->rts_state = 0; @@ -660,7 +660,7 @@ static int sierra_startup(struct usb_serial *serial) int i; int j; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Set Device mode to D0 */ sierra_set_power_state(serial->dev, 0x0000); @@ -675,7 +675,7 @@ static int sierra_startup(struct usb_serial *serial) portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); if (!portdata) { dbg("%s: kmalloc for sierra_port_private (%d) failed!.", - __FUNCTION__, i); + __func__, i); return -ENOMEM; } spin_lock_init(&portdata->lock); @@ -696,7 +696,7 @@ static int sierra_startup(struct usb_serial *serial) urb = usb_alloc_urb(0, GFP_KERNEL); if (urb == NULL) { dbg("%s: alloc for in port failed.", - __FUNCTION__); + __func__); continue; } /* Fill URB using supplied data. */ @@ -718,7 +718,7 @@ static void sierra_shutdown(struct usb_serial *serial) struct usb_serial_port *port; struct sierra_port_private *portdata; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index f3bbf777c81a..e0b1564de900 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -408,14 +408,14 @@ static int ti_startup(struct usb_serial *serial) dbg("%s - product 0x%4X, num configurations %d, configuration value %d", - __FUNCTION__, le16_to_cpu(dev->descriptor.idProduct), + __func__, le16_to_cpu(dev->descriptor.idProduct), dev->descriptor.bNumConfigurations, dev->actconfig->desc.bConfigurationValue); /* create device structure */ tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL); if (tdev == NULL) { - dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&dev->dev, "%s - out of memory\n", __func__); return -ENOMEM; } mutex_init(&tdev->td_open_close_lock); @@ -425,7 +425,7 @@ static int ti_startup(struct usb_serial *serial) /* determine device type */ if (usb_match_id(serial->interface, ti_id_table_3410)) tdev->td_is_3410 = 1; - dbg("%s - device type is %s", __FUNCTION__, tdev->td_is_3410 ? "3410" : "5052"); + dbg("%s - device type is %s", __func__, tdev->td_is_3410 ? "3410" : "5052"); /* if we have only 1 configuration, download firmware */ if (dev->descriptor.bNumConfigurations == 1) { @@ -459,7 +459,7 @@ static int ti_startup(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL); if (tport == NULL) { - dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&dev->dev, "%s - out of memory\n", __func__); status = -ENOMEM; goto free_tports; } @@ -471,7 +471,7 @@ static int ti_startup(struct usb_serial *serial) init_waitqueue_head(&tport->tp_write_wait); tport->tp_write_buf = ti_buf_alloc(); if (tport->tp_write_buf == NULL) { - dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&dev->dev, "%s - out of memory\n", __func__); kfree(tport); status = -ENOMEM; goto free_tports; @@ -504,7 +504,7 @@ static void ti_shutdown(struct usb_serial *serial) struct ti_device *tdev = usb_get_serial_data(serial); struct ti_port *tport; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); for (i=0; i < serial->num_ports; ++i) { tport = usb_get_serial_port_data(serial->port[i]); @@ -532,7 +532,7 @@ static int ti_open(struct usb_serial_port *port, struct file *file) TI_PIPE_TIMEOUT_ENABLE | (TI_TRANSFER_TIMEOUT << 2)); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (tport == NULL) return -ENODEV; @@ -557,10 +557,10 @@ static int ti_open(struct usb_serial_port *port, struct file *file) /* start interrupt urb the first time a port is opened on this device */ if (tdev->td_open_port_count == 0) { - dbg("%s - start interrupt in urb", __FUNCTION__); + dbg("%s - start interrupt in urb", __func__); urb = tdev->td_serial->port[0]->interrupt_in_urb; if (!urb) { - dev_err(&port->dev, "%s - no interrupt urb\n", __FUNCTION__); + dev_err(&port->dev, "%s - no interrupt urb\n", __func__); status = -EINVAL; goto release_lock; } @@ -569,40 +569,40 @@ static int ti_open(struct usb_serial_port *port, struct file *file) urb->dev = dev; status = usb_submit_urb(urb, GFP_KERNEL); if (status) { - dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status); goto release_lock; } } ti_set_termios(port, port->tty->termios); - dbg("%s - sending TI_OPEN_PORT", __FUNCTION__); + dbg("%s - sending TI_OPEN_PORT", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot send open command, %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - cannot send open command, %d\n", __func__, status); goto unlink_int_urb; } - dbg("%s - sending TI_START_PORT", __FUNCTION__); + dbg("%s - sending TI_START_PORT", __func__); status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot send start command, %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - cannot send start command, %d\n", __func__, status); goto unlink_int_urb; } - dbg("%s - sending TI_PURGE_PORT", __FUNCTION__); + dbg("%s - sending TI_PURGE_PORT", __func__); status = ti_command_out_sync(tdev, TI_PURGE_PORT, (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __func__, status); goto unlink_int_urb; } status = ti_command_out_sync(tdev, TI_PURGE_PORT, (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __func__, status); goto unlink_int_urb; } @@ -613,27 +613,27 @@ static int ti_open(struct usb_serial_port *port, struct file *file) ti_set_termios(port, port->tty->termios); - dbg("%s - sending TI_OPEN_PORT (2)", __FUNCTION__); + dbg("%s - sending TI_OPEN_PORT (2)", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __func__, status); goto unlink_int_urb; } - dbg("%s - sending TI_START_PORT (2)", __FUNCTION__); + dbg("%s - sending TI_START_PORT (2)", __func__); status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __func__, status); goto unlink_int_urb; } /* start read urb */ - dbg("%s - start read urb", __FUNCTION__); + dbg("%s - start read urb", __func__); urb = port->read_urb; if (!urb) { - dev_err(&port->dev, "%s - no read urb\n", __FUNCTION__); + dev_err(&port->dev, "%s - no read urb\n", __func__); status = -EINVAL; goto unlink_int_urb; } @@ -643,7 +643,7 @@ static int ti_open(struct usb_serial_port *port, struct file *file) urb->dev = dev; status = usb_submit_urb(urb, GFP_KERNEL); if (status) { - dev_err(&port->dev, "%s - submit read urb failed, %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - submit read urb failed, %d\n", __func__, status); goto unlink_int_urb; } @@ -657,7 +657,7 @@ unlink_int_urb: usb_kill_urb(port->serial->port[0]->interrupt_in_urb); release_lock: mutex_unlock(&tdev->td_open_close_lock); - dbg("%s - exit %d", __FUNCTION__, status); + dbg("%s - exit %d", __func__, status); return status; } @@ -670,7 +670,7 @@ static void ti_close(struct usb_serial_port *port, struct file *file) int status; int do_unlock; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); tdev = usb_get_serial_data(port->serial); tport = usb_get_serial_port_data(port); @@ -687,11 +687,11 @@ static void ti_close(struct usb_serial_port *port, struct file *file) port_number = port->number - port->serial->minor; - dbg("%s - sending TI_CLOSE_PORT", __FUNCTION__); + dbg("%s - sending TI_CLOSE_PORT", __func__); status = ti_command_out_sync(tdev, TI_CLOSE_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) - dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __FUNCTION__, status); + dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __func__, status); /* if mutex_lock is interrupted, continue anyway */ do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock); @@ -704,7 +704,7 @@ static void ti_close(struct usb_serial_port *port, struct file *file) if (do_unlock) mutex_unlock(&tdev->td_open_close_lock); - dbg("%s - exit", __FUNCTION__); + dbg("%s - exit", __func__); } @@ -714,10 +714,10 @@ static int ti_write(struct usb_serial_port *port, const unsigned char *data, struct ti_port *tport = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (count == 0) { - dbg("%s - write request of 0 bytes", __FUNCTION__); + dbg("%s - write request of 0 bytes", __func__); return 0; } @@ -740,7 +740,7 @@ static int ti_write_room(struct usb_serial_port *port) int room = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (tport == NULL) return -ENODEV; @@ -749,7 +749,7 @@ static int ti_write_room(struct usb_serial_port *port) room = ti_buf_space_avail(tport->tp_write_buf); spin_unlock_irqrestore(&tport->tp_lock, flags); - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return room; } @@ -760,7 +760,7 @@ static int ti_chars_in_buffer(struct usb_serial_port *port) int chars = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (tport == NULL) return -ENODEV; @@ -769,7 +769,7 @@ static int ti_chars_in_buffer(struct usb_serial_port *port) chars = ti_buf_data_avail(tport->tp_write_buf); spin_unlock_irqrestore(&tport->tp_lock, flags); - dbg("%s - returns %d", __FUNCTION__, chars); + dbg("%s - returns %d", __func__, chars); return chars; } @@ -779,14 +779,14 @@ static void ti_throttle(struct usb_serial_port *port) struct ti_port *tport = usb_get_serial_port_data(port); struct tty_struct *tty; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (tport == NULL) return; tty = port->tty; if (!tty) { - dbg("%s - no tty", __FUNCTION__); + dbg("%s - no tty", __func__); return; } @@ -802,21 +802,21 @@ static void ti_unthrottle(struct usb_serial_port *port) struct tty_struct *tty; int status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (tport == NULL) return; tty = port->tty; if (!tty) { - dbg("%s - no tty", __FUNCTION__); + dbg("%s - no tty", __func__); return; } if (I_IXOFF(tty) || C_CRTSCTS(tty)) { status = ti_restart_read(tport, tty); if (status) - dev_err(&port->dev, "%s - cannot restart read, %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - cannot restart read, %d\n", __func__, status); } } @@ -828,24 +828,24 @@ static int ti_ioctl(struct usb_serial_port *port, struct file *file, struct async_icount cnow; struct async_icount cprev; - dbg("%s - port %d, cmd = 0x%04X", __FUNCTION__, port->number, cmd); + dbg("%s - port %d, cmd = 0x%04X", __func__, port->number, cmd); if (tport == NULL) return -ENODEV; switch (cmd) { case TIOCGSERIAL: - dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__, port->number); + dbg("%s - (%d) TIOCGSERIAL", __func__, port->number); return ti_get_serial_info(tport, (struct serial_struct __user *)arg); break; case TIOCSSERIAL: - dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__, port->number); + dbg("%s - (%d) TIOCSSERIAL", __func__, port->number); return ti_set_serial_info(tport, (struct serial_struct __user *)arg); break; case TIOCMIWAIT: - dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__, port->number); + dbg("%s - (%d) TIOCMIWAIT", __func__, port->number); cprev = tport->tp_icount; while (1) { interruptible_sleep_on(&tport->tp_msr_wait); @@ -866,7 +866,7 @@ static int ti_ioctl(struct usb_serial_port *port, struct file *file, break; case TIOCGICOUNT: - dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, port->number, tport->tp_icount.rx, tport->tp_icount.tx); + dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, tport->tp_icount.rx, tport->tp_icount.tx); if (copy_to_user((void __user *)arg, &tport->tp_icount, sizeof(tport->tp_icount))) return -EFAULT; return 0; @@ -888,20 +888,20 @@ static void ti_set_termios(struct usb_serial_port *port, int port_number = port->number - port->serial->minor; unsigned int mcr; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); cflag = tty->termios->c_cflag; iflag = tty->termios->c_iflag; - dbg("%s - cflag %08x, iflag %08x", __FUNCTION__, cflag, iflag); - dbg("%s - old clfag %08x, old iflag %08x", __FUNCTION__, old_termios->c_cflag, old_termios->c_iflag); + dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag); + dbg("%s - old clfag %08x, old iflag %08x", __func__, old_termios->c_cflag, old_termios->c_iflag); if (tport == NULL) return; config = kmalloc(sizeof(*config), GFP_KERNEL); if (!config) { - dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&port->dev, "%s - out of memory\n", __func__); return; } @@ -985,7 +985,7 @@ static void ti_set_termios(struct usb_serial_port *port, tty_encode_baud_rate(tty, baud, baud); dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d", - __FUNCTION__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode); + __func__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode); cpu_to_be16s(&config->wBaudRate); cpu_to_be16s(&config->wFlags); @@ -994,7 +994,7 @@ static void ti_set_termios(struct usb_serial_port *port, (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config, sizeof(*config)); if (status) - dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __FUNCTION__, port_number, status); + dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __func__, port_number, status); /* SET_CONFIG asserts RTS and DTR, reset them correctly */ mcr = tport->tp_shadow_mcr; @@ -1003,7 +1003,7 @@ static void ti_set_termios(struct usb_serial_port *port, mcr &= ~(TI_MCR_DTR | TI_MCR_RTS); status = ti_set_mcr(tport, mcr); if (status) - dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __FUNCTION__, port_number, status); + dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __func__, port_number, status); kfree(config); } @@ -1017,7 +1017,7 @@ static int ti_tiocmget(struct usb_serial_port *port, struct file *file) unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (tport == NULL) return -ENODEV; @@ -1035,7 +1035,7 @@ static int ti_tiocmget(struct usb_serial_port *port, struct file *file) | ((msr & TI_MSR_RI) ? TIOCM_RI : 0) | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0); - dbg("%s - 0x%04X", __FUNCTION__, result); + dbg("%s - 0x%04X", __func__, result); return result; } @@ -1048,7 +1048,7 @@ static int ti_tiocmset(struct usb_serial_port *port, struct file *file, unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (tport == NULL) return -ENODEV; @@ -1080,7 +1080,7 @@ static void ti_break(struct usb_serial_port *port, int break_state) struct ti_port *tport = usb_get_serial_port_data(port); int status; - dbg("%s - state = %d", __FUNCTION__, break_state); + dbg("%s - state = %d", __func__, break_state); if (tport == NULL) return; @@ -1092,7 +1092,7 @@ static void ti_break(struct usb_serial_port *port, int break_state) TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0); if (status) - dbg("%s - error setting break, %d", __FUNCTION__, status); + dbg("%s - error setting break, %d", __func__, status); } @@ -1111,7 +1111,7 @@ static void ti_interrupt_callback(struct urb *urb) int retval; __u8 msr; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); switch (status) { case 0: @@ -1119,33 +1119,33 @@ static void ti_interrupt_callback(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("%s - urb shutting down, %d", __FUNCTION__, status); + dbg("%s - urb shutting down, %d", __func__, status); tdev->td_urb_error = 1; return; default: dev_err(dev, "%s - nonzero urb status, %d\n", - __FUNCTION__, status); + __func__, status); tdev->td_urb_error = 1; goto exit; } if (length != 2) { - dbg("%s - bad packet size, %d", __FUNCTION__, length); + dbg("%s - bad packet size, %d", __func__, length); goto exit; } if (data[0] == TI_CODE_HARDWARE_ERROR) { - dev_err(dev, "%s - hardware error, %d\n", __FUNCTION__, data[1]); + dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]); goto exit; } port_number = TI_GET_PORT_FROM_CODE(data[0]); function = TI_GET_FUNC_FROM_CODE(data[0]); - dbg("%s - port_number %d, function %d, data 0x%02X", __FUNCTION__, port_number, function, data[1]); + dbg("%s - port_number %d, function %d, data 0x%02X", __func__, port_number, function, data[1]); if (port_number >= serial->num_ports) { - dev_err(dev, "%s - bad port number, %d\n", __FUNCTION__, port_number); + dev_err(dev, "%s - bad port number, %d\n", __func__, port_number); goto exit; } @@ -1157,17 +1157,17 @@ static void ti_interrupt_callback(struct urb *urb) switch (function) { case TI_CODE_DATA_ERROR: - dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __FUNCTION__, port_number, data[1]); + dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __func__, port_number, data[1]); break; case TI_CODE_MODEM_STATUS: msr = data[1]; - dbg("%s - port %d, msr 0x%02X", __FUNCTION__, port_number, msr); + dbg("%s - port %d, msr 0x%02X", __func__, port_number, msr); ti_handle_new_msr(tport, msr); break; default: - dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __FUNCTION__, data[1]); + dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __func__, data[1]); break; } @@ -1175,7 +1175,7 @@ exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) dev_err(dev, "%s - resubmit interrupt urb failed, %d\n", - __FUNCTION__, retval); + __func__, retval); } @@ -1187,7 +1187,7 @@ static void ti_bulk_in_callback(struct urb *urb) int status = urb->status; int retval = 0; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); switch (status) { case 0: @@ -1195,13 +1195,13 @@ static void ti_bulk_in_callback(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("%s - urb shutting down, %d", __FUNCTION__, status); + dbg("%s - urb shutting down, %d", __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); return; default: dev_err(dev, "%s - nonzero urb status, %d\n", - __FUNCTION__, status ); + __func__, status ); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); } @@ -1210,16 +1210,16 @@ static void ti_bulk_in_callback(struct urb *urb) goto exit; if (status) { - dev_err(dev, "%s - stopping read!\n", __FUNCTION__); + dev_err(dev, "%s - stopping read!\n", __func__); return; } if (port->tty && urb->actual_length) { - usb_serial_debug_data(debug, dev, __FUNCTION__, + usb_serial_debug_data(debug, dev, __func__, urb->actual_length, urb->transfer_buffer); if (!tport->tp_is_open) - dbg("%s - port closed, dropping data", __FUNCTION__); + dbg("%s - port closed, dropping data", __func__); else ti_recv(&urb->dev->dev, port->tty, urb->transfer_buffer, urb->actual_length); @@ -1241,7 +1241,7 @@ exit: spin_unlock(&tport->tp_lock); if (retval) dev_err(dev, "%s - resubmit read urb failed, %d\n", - __FUNCTION__, retval); + __func__, retval); } @@ -1252,7 +1252,7 @@ static void ti_bulk_out_callback(struct urb *urb) struct device *dev = &urb->dev->dev; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); tport->tp_write_urb_in_use = 0; @@ -1262,13 +1262,13 @@ static void ti_bulk_out_callback(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("%s - urb shutting down, %d", __FUNCTION__, status); + dbg("%s - urb shutting down, %d", __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); return; default: dev_err(dev, "%s - nonzero urb status, %d\n", - __FUNCTION__, status); + __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); } @@ -1286,7 +1286,7 @@ static void ti_recv(struct device *dev, struct tty_struct *tty, do { cnt = tty_buffer_request_room(tty, length); if (cnt < length) { - dev_err(dev, "%s - dropping data, %d bytes lost\n", __FUNCTION__, length - cnt); + dev_err(dev, "%s - dropping data, %d bytes lost\n", __func__, length - cnt); if(cnt == 0) break; } @@ -1307,7 +1307,7 @@ static void ti_send(struct ti_port *tport) unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&tport->tp_lock, flags); @@ -1329,7 +1329,7 @@ static void ti_send(struct ti_port *tport) spin_unlock_irqrestore(&tport->tp_lock, flags); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer); usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, @@ -1339,7 +1339,7 @@ static void ti_send(struct ti_port *tport) result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - submit write urb failed, %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - submit write urb failed, %d\n", __func__, result); tport->tp_write_urb_in_use = 0; /* TODO: reschedule ti_send */ } else { @@ -1381,23 +1381,23 @@ static int ti_get_lsr(struct ti_port *tport) int port_number = port->number - port->serial->minor; struct ti_port_status *data; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); size = sizeof(struct ti_port_status); data = kmalloc(size, GFP_KERNEL); if (!data) { - dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&port->dev, "%s - out of memory\n", __func__); return -ENOMEM; } status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS, (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size); if (status) { - dev_err(&port->dev, "%s - get port status command failed, %d\n", __FUNCTION__, status); + dev_err(&port->dev, "%s - get port status command failed, %d\n", __func__, status); goto free_data; } - dbg("%s - lsr 0x%02X", __FUNCTION__, data->bLSR); + dbg("%s - lsr 0x%02X", __func__, data->bLSR); tport->tp_lsr = data->bLSR; @@ -1458,7 +1458,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) struct tty_struct *tty; unsigned long flags; - dbg("%s - msr 0x%02X", __FUNCTION__, msr); + dbg("%s - msr 0x%02X", __func__, msr); if (msr & TI_MSR_DELTA_MASK) { spin_lock_irqsave(&tport->tp_lock, flags); @@ -1496,7 +1496,7 @@ static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush) struct usb_serial_port *port = tport->tp_port; wait_queue_t wait; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irq(&tport->tp_lock); @@ -1628,12 +1628,12 @@ static int ti_write_byte(struct ti_device *tdev, unsigned long addr, struct ti_write_data_bytes *data; struct device *dev = &tdev->td_serial->dev->dev; - dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __FUNCTION__, addr, mask, byte); + dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __func__, addr, mask, byte); size = sizeof(struct ti_write_data_bytes) + 2; data = kmalloc(size, GFP_KERNEL); if (!data) { - dev_err(dev, "%s - out of memory\n", __FUNCTION__); + dev_err(dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -1649,7 +1649,7 @@ static int ti_write_byte(struct ti_device *tdev, unsigned long addr, (__u8 *)data, size); if (status < 0) - dev_err(dev, "%s - failed, %d\n", __FUNCTION__, status); + dev_err(dev, "%s - failed, %d\n", __func__, status); kfree(data); @@ -1676,7 +1676,7 @@ static int ti_download_firmware(struct ti_device *tdev, buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header); buffer = kmalloc(buffer_size, GFP_KERNEL); if (!buffer) { - dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&dev->dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -1690,7 +1690,7 @@ static int ti_download_firmware(struct ti_device *tdev, header->wLength = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_firmware_header))); header->bCheckSum = cs; - dbg("%s - downloading firmware", __FUNCTION__); + dbg("%s - downloading firmware", __func__); for (pos = 0; pos < buffer_size; pos += done) { len = min(buffer_size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE); status = usb_bulk_msg(dev, pipe, buffer+pos, len, &done, 1000); @@ -1701,11 +1701,11 @@ static int ti_download_firmware(struct ti_device *tdev, kfree(buffer); if (status) { - dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __FUNCTION__, status); + dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __func__, status); return status; } - dbg("%s - download successful", __FUNCTION__); + dbg("%s - download successful", __func__); return 0; } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 5b464811fa4d..baf953d14d82 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -81,7 +81,7 @@ static struct usb_serial *get_free_serial (struct usb_serial *serial, int num_po unsigned int i, j; int good_spot; - dbg("%s %d", __FUNCTION__, num_ports); + dbg("%s %d", __func__, num_ports); *minor = 0; mutex_lock(&table_lock); @@ -101,7 +101,7 @@ static struct usb_serial *get_free_serial (struct usb_serial *serial, int num_po *minor = i; j = 0; - dbg("%s - minor base = %d", __FUNCTION__, *minor); + dbg("%s - minor base = %d", __func__, *minor); for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) { serial_table[i] = serial; serial->port[j++]->number = i; @@ -117,7 +117,7 @@ static void return_serial(struct usb_serial *serial) { int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (serial == NULL) return; @@ -135,7 +135,7 @@ static void destroy_serial(struct kref *kref) serial = to_usb_serial(kref); - dbg("%s - %s", __FUNCTION__, serial->type->description); + dbg("%s - %s", __func__, serial->type->description); serial->type->shutdown(serial); @@ -187,7 +187,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) unsigned int portNumber; int retval; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* get the serial object associated with this tty pointer */ serial = usb_serial_get_by_index(tty->index); @@ -259,7 +259,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp) if (!port) return; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); mutex_lock(&port->mutex); @@ -299,11 +299,11 @@ static int serial_write (struct tty_struct * tty, const unsigned char *buf, int if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED) goto exit; - dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count); + dbg("%s - port %d, %d byte(s)", __func__, port->number, count); if (!port->open_count) { retval = -EINVAL; - dbg("%s - port not opened", __FUNCTION__); + dbg("%s - port not opened", __func__); goto exit; } @@ -322,10 +322,10 @@ static int serial_write_room (struct tty_struct *tty) if (!port) goto exit; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); + dbg("%s - port not open", __func__); goto exit; } @@ -344,10 +344,10 @@ static int serial_chars_in_buffer (struct tty_struct *tty) if (!port) goto exit; - dbg("%s = port %d", __FUNCTION__, port->number); + dbg("%s = port %d", __func__, port->number); if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); + dbg("%s - port not open", __func__); goto exit; } @@ -365,10 +365,10 @@ static void serial_throttle (struct tty_struct * tty) if (!port) return; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->open_count) { - dbg ("%s - port not open", __FUNCTION__); + dbg ("%s - port not open", __func__); return; } @@ -384,10 +384,10 @@ static void serial_unthrottle (struct tty_struct * tty) if (!port) return; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); + dbg("%s - port not open", __func__); return; } @@ -405,11 +405,11 @@ static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned in if (!port) goto exit; - dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); + dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); /* Caution - port->open_count is BKL protected */ if (!port->open_count) { - dbg ("%s - port not open", __FUNCTION__); + dbg ("%s - port not open", __func__); goto exit; } @@ -430,10 +430,10 @@ static void serial_set_termios (struct tty_struct *tty, struct ktermios * old) if (!port) return; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); + dbg("%s - port not open", __func__); return; } @@ -454,10 +454,10 @@ static void serial_break (struct tty_struct *tty, int break_state) return; } - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); + dbg("%s - port not open", __func__); unlock_kernel(); return; } @@ -476,7 +476,7 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int off_t begin = 0; char tmp[40]; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); length += sprintf (page, "usbserinfo:1.0 driver:2.0\n"); for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) { serial = usb_serial_get_by_index(i); @@ -522,10 +522,10 @@ static int serial_tiocmget (struct tty_struct *tty, struct file *file) if (!port) return -ENODEV; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); + dbg("%s - port not open", __func__); return -ENODEV; } @@ -543,10 +543,10 @@ static int serial_tiocmset (struct tty_struct *tty, struct file *file, if (!port) return -ENODEV; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); + dbg("%s - port not open", __func__); return -ENODEV; } @@ -572,7 +572,7 @@ static void usb_serial_port_work(struct work_struct *work) container_of(work, struct usb_serial_port, work); struct tty_struct *tty; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port) return; @@ -588,7 +588,7 @@ static void port_release(struct device *dev) { struct usb_serial_port *port = to_usb_serial_port(dev); - dbg ("%s - %s", __FUNCTION__, dev->bus_id); + dbg ("%s - %s", __func__, dev->bus_id); port_free(port); } @@ -634,7 +634,7 @@ static struct usb_serial * create_serial (struct usb_device *dev, serial = kzalloc(sizeof(*serial), GFP_KERNEL); if (!serial) { - dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&dev->dev, "%s - out of memory\n", __func__); return NULL; } serial->dev = usb_get_dev(dev); @@ -729,7 +729,7 @@ int usb_serial_probe(struct usb_interface *interface, serial = create_serial (dev, interface, type); if (!serial) { unlock_kernel(); - dev_err(&interface->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&interface->dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -874,7 +874,7 @@ int usb_serial_probe(struct usb_interface *interface, serial->num_port_pointers = max_endpoints; unlock_kernel(); - dbg("%s - setting up %d port structures for this device", __FUNCTION__, max_endpoints); + dbg("%s - setting up %d port structures for this device", __func__, max_endpoints); for (i = 0; i < max_endpoints; ++i) { port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL); if (!port) @@ -1022,7 +1022,7 @@ int usb_serial_probe(struct usb_interface *interface, port->dev.release = &port_release; snprintf (&port->dev.bus_id[0], sizeof(port->dev.bus_id), "ttyUSB%d", port->number); - dbg ("%s - registering %s", __FUNCTION__, port->dev.bus_id); + dbg ("%s - registering %s", __func__, port->dev.bus_id); retval = device_register(&port->dev); if (retval) dev_err(&port->dev, "Error registering port device, " @@ -1081,7 +1081,7 @@ void usb_serial_disconnect(struct usb_interface *interface) struct usb_serial_port *port; usb_serial_console_disconnect(serial); - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); mutex_lock(&serial->disc_mutex); usb_set_intfdata (interface, NULL); @@ -1165,7 +1165,7 @@ static int __init usb_serial_init(void) result = bus_register(&usb_serial_bus_type); if (result) { - err("%s - registering bus driver failed", __FUNCTION__); + err("%s - registering bus driver failed", __func__); goto exit_bus; } @@ -1182,21 +1182,21 @@ static int __init usb_serial_init(void) tty_set_operations(usb_serial_tty_driver, &serial_ops); result = tty_register_driver(usb_serial_tty_driver); if (result) { - err("%s - tty_register_driver failed", __FUNCTION__); + err("%s - tty_register_driver failed", __func__); goto exit_reg_driver; } /* register the USB driver */ result = usb_register(&usb_serial_driver); if (result < 0) { - err("%s - usb_register failed", __FUNCTION__); + err("%s - usb_register failed", __func__); goto exit_tty; } /* register the generic driver, if we should */ result = usb_serial_generic_register(debug); if (result < 0) { - err("%s - registering generic driver failed", __FUNCTION__); + err("%s - registering generic driver failed", __func__); goto exit_generic; } @@ -1214,7 +1214,7 @@ exit_reg_driver: bus_unregister(&usb_serial_bus_type); exit_bus: - err ("%s - returning with error %d", __FUNCTION__, result); + err ("%s - returning with error %d", __func__, result); put_tty_driver(usb_serial_tty_driver); return result; } diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index f2d59b06c364..137df445e296 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -281,7 +281,7 @@ static int visor_open (struct usb_serial_port *port, struct file *filp) unsigned long flags; int result = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->read_urb) { /* this is needed for some brain dead Sony devices */ @@ -313,16 +313,16 @@ static int visor_open (struct usb_serial_port *port, struct file *filp) result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", - __FUNCTION__, result); + __func__, result); goto exit; } if (port->interrupt_in_urb) { - dbg("%s - adding interrupt input for treo", __FUNCTION__); + dbg("%s - adding interrupt input for treo", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n", - __FUNCTION__, result); + __func__, result); } exit: return result; @@ -334,7 +334,7 @@ static void visor_close (struct usb_serial_port *port, struct file * filp) struct visor_private *priv = usb_get_serial_port_data(port); unsigned char *transfer_buffer; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* shutdown our urbs */ usb_kill_urb(port->read_urb); @@ -370,12 +370,12 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf, unsigned long flags; int status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit\n", __FUNCTION__); + dbg("%s - write limit hit\n", __func__); return 0; } priv->outstanding_urbs++; @@ -397,7 +397,7 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf, memcpy (buffer, buf, count); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); usb_fill_bulk_urb (urb, serial->dev, usb_sndbulkpipe (serial->dev, @@ -409,7 +409,7 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf, status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", - __FUNCTION__, status); + __func__, status); count = status; goto error; } else { @@ -440,7 +440,7 @@ static int visor_write_room (struct usb_serial_port *port) struct visor_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* * We really can take anything the user throws at us @@ -451,7 +451,7 @@ static int visor_write_room (struct usb_serial_port *port) spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit\n", __FUNCTION__); + dbg("%s - write limit hit\n", __func__); return 0; } spin_unlock_irqrestore(&priv->lock, flags); @@ -462,7 +462,7 @@ static int visor_write_room (struct usb_serial_port *port) static int visor_chars_in_buffer (struct usb_serial_port *port) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* * We can't really account for how much data we @@ -484,11 +484,11 @@ static void visor_write_bulk_callback (struct urb *urb) /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree (urb->transfer_buffer); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); spin_lock_irqsave(&priv->lock, flags); --priv->outstanding_urbs; @@ -508,15 +508,15 @@ static void visor_read_bulk_callback (struct urb *urb) int result; int available_room; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); tty = port->tty; if (tty && urb->actual_length) { @@ -542,7 +542,7 @@ static void visor_read_bulk_callback (struct urb *urb) visor_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); } else { priv->actually_throttled = 1; } @@ -564,11 +564,11 @@ static void visor_read_int_callback (struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); + __func__, status); return; default: dbg("%s - nonzero urb status received: %d", - __FUNCTION__, status); + __func__, status); goto exit; } @@ -579,14 +579,14 @@ static void visor_read_int_callback (struct urb *urb) * Rumor has it this endpoint is used to notify when data * is ready to be read from the bulk ones. */ - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, urb->transfer_buffer); exit: result = usb_submit_urb (urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n", - __FUNCTION__, result); + __func__, result); } static void visor_throttle (struct usb_serial_port *port) @@ -594,7 +594,7 @@ static void visor_throttle (struct usb_serial_port *port) struct visor_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); priv->throttled = 1; spin_unlock_irqrestore(&priv->lock, flags); @@ -607,7 +607,7 @@ static void visor_unthrottle (struct usb_serial_port *port) unsigned long flags; int result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); priv->throttled = 0; priv->actually_throttled = 0; @@ -616,7 +616,7 @@ static void visor_unthrottle (struct usb_serial_port *port) port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); } static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id) @@ -629,11 +629,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i int i; int num_ports = 0; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); transfer_buffer = kmalloc (sizeof (*connection_info), GFP_KERNEL); if (!transfer_buffer) { - dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __FUNCTION__, + dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__, sizeof(*connection_info)); return -ENOMEM; } @@ -646,7 +646,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i sizeof(*connection_info), 300); if (retval < 0) { dev_err(dev, "%s - error %d getting connection information\n", - __FUNCTION__, retval); + __func__, retval); goto exit; } @@ -706,7 +706,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i 0x02, 300); if (retval < 0) dev_err(dev, "%s - error %d getting bytes available request\n", - __FUNCTION__, retval); + __func__, retval); retval = 0; exit: @@ -722,11 +722,11 @@ static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_i unsigned char *transfer_buffer; int retval; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); transfer_buffer = kmalloc (sizeof (*connection_info), GFP_KERNEL); if (!transfer_buffer) { - dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __FUNCTION__, + dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__, sizeof(*connection_info)); return -ENOMEM; } @@ -738,9 +738,9 @@ static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_i sizeof (*connection_info), 300); if (retval < 0) dev_err(dev, "%s - error %d getting connection info\n", - __FUNCTION__, retval); + __func__, retval); else - usb_serial_debug_data(debug, &serial->dev->dev, __FUNCTION__, + usb_serial_debug_data(debug, &serial->dev->dev, __func__, retval, transfer_buffer); kfree (transfer_buffer); @@ -753,7 +753,7 @@ static int visor_probe (struct usb_serial *serial, const struct usb_device_id *i int retval = 0; int (*startup) (struct usb_serial *serial, const struct usb_device_id *id); - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (serial->dev->actconfig->desc.bConfigurationValue != 1) { err("active config #%d != 1 ??", @@ -807,7 +807,7 @@ static int clie_3_5_startup (struct usb_serial *serial) int result; u8 data; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* * Note that PEG-300 series devices expect the following two calls. @@ -818,11 +818,11 @@ static int clie_3_5_startup (struct usb_serial *serial) USB_REQ_GET_CONFIGURATION, USB_DIR_IN, 0, 0, &data, 1, 3000); if (result < 0) { - dev_err(dev, "%s: get config number failed: %d\n", __FUNCTION__, result); + dev_err(dev, "%s: get config number failed: %d\n", __func__, result); return result; } if (result != 1) { - dev_err(dev, "%s: get config number bad return length: %d\n", __FUNCTION__, result); + dev_err(dev, "%s: get config number bad return length: %d\n", __func__, result); return -EIO; } @@ -832,11 +832,11 @@ static int clie_3_5_startup (struct usb_serial *serial) USB_DIR_IN | USB_RECIP_INTERFACE, 0, 0, &data, 1, 3000); if (result < 0) { - dev_err(dev, "%s: get interface number failed: %d\n", __FUNCTION__, result); + dev_err(dev, "%s: get interface number failed: %d\n", __func__, result); return result; } if (result != 1) { - dev_err(dev, "%s: get interface number bad return length: %d\n", __FUNCTION__, result); + dev_err(dev, "%s: get interface number bad return length: %d\n", __func__, result); return -EIO; } @@ -854,7 +854,7 @@ static int treo_attach (struct usb_serial *serial) (serial->num_interrupt_in == 0)) goto generic_startup; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* * It appears that Treos and Kyoceras want to use the @@ -885,7 +885,7 @@ generic_startup: static int clie_5_attach (struct usb_serial *serial) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* TH55 registers 2 ports. Communication in from the UX50/TH55 uses bulk_in_endpointAddress from port 0 @@ -909,7 +909,7 @@ static void visor_shutdown (struct usb_serial *serial) struct visor_private *priv; int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); for (i = 0; i < serial->num_ports; i++) { priv = usb_get_serial_port_data(serial->port[i]); @@ -922,7 +922,7 @@ static void visor_shutdown (struct usb_serial *serial) static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) { - dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); + dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); return -ENOIOCTLCMD; } diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index c5af57be62f4..fb02424de4a0 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -282,7 +282,7 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct int response; const struct whiteheat_hex_record *record; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); response = ezusb_set_reset (serial, 1); @@ -292,7 +292,7 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct (unsigned char *)record->data, record->data_size, 0xa0); if (response < 0) { err("%s - ezusb_writememory failed for loader (%d %04X %p %d)", - __FUNCTION__, response, record->address, record->data, record->data_size); + __func__, response, record->address, record->data, record->data_size); break; } ++record; @@ -309,7 +309,7 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct (unsigned char *)record->data, record->data_size, 0xa3); if (response < 0) { err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)", - __FUNCTION__, response, record->address, record->data, record->data_size); + __func__, response, record->address, record->data, record->data_size); break; } ++record; @@ -323,7 +323,7 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct (unsigned char *)record->data, record->data_size, 0xa0); if (response < 0) { err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)", - __FUNCTION__, response, record->address, record->data, record->data_size); + __func__, response, record->address, record->data, record->data_size); break; } ++record; @@ -561,7 +561,7 @@ static void whiteheat_shutdown (struct usb_serial *serial) struct list_head *tmp2; int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* free up our private data for our command port */ command_port = serial->port[COMMAND_PORT]; @@ -598,7 +598,7 @@ static int whiteheat_open (struct usb_serial_port *port, struct file *filp) int retval = 0; struct ktermios old_term; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); retval = start_command_port(port->serial); if (retval) @@ -631,14 +631,14 @@ static int whiteheat_open (struct usb_serial_port *port, struct file *filp) /* Start reading from the device */ retval = start_port_read(port); if (retval) { - err("%s - failed submitting read urb, error %d", __FUNCTION__, retval); + err("%s - failed submitting read urb, error %d", __func__, retval); firm_close(port); stop_command_port(port->serial); goto exit; } exit: - dbg("%s - exit, retval = %d", __FUNCTION__, retval); + dbg("%s - exit, retval = %d", __func__, retval); return retval; } @@ -651,7 +651,7 @@ static void whiteheat_close(struct usb_serial_port *port, struct file * filp) struct list_head *tmp; struct list_head *tmp2; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); mutex_lock(&port->serial->disc_mutex); /* filp is NULL when called from usb_serial_disconnect */ @@ -726,10 +726,10 @@ static int whiteheat_write(struct usb_serial_port *port, const unsigned char *bu unsigned long flags; struct list_head *tmp; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (count == 0) { - dbg("%s - write request of 0 bytes", __FUNCTION__); + dbg("%s - write request of 0 bytes", __func__); return (0); } @@ -748,13 +748,13 @@ static int whiteheat_write(struct usb_serial_port *port, const unsigned char *bu bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count; memcpy (urb->transfer_buffer, buf + sent, bytes); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, bytes, urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __func__, bytes, urb->transfer_buffer); urb->dev = serial->dev; urb->transfer_buffer_length = bytes; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __FUNCTION__, result); + err("%s - failed submitting write urb, error %d", __func__, result); sent = result; spin_lock_irqsave(&info->lock, flags); list_add(tmp, &info->tx_urbs_free); @@ -780,7 +780,7 @@ static int whiteheat_write_room(struct usb_serial_port *port) int room = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&info->lock, flags); list_for_each(tmp, &info->tx_urbs_free) @@ -788,7 +788,7 @@ static int whiteheat_write_room(struct usb_serial_port *port) spin_unlock_irqrestore(&info->lock, flags); room *= port->bulk_out_size; - dbg("%s - returns %d", __FUNCTION__, room); + dbg("%s - returns %d", __func__, room); return (room); } @@ -798,7 +798,7 @@ static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file) struct whiteheat_private *info = usb_get_serial_port_data(port); unsigned int modem_signals = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); firm_get_dtr_rts(port); if (info->mcr & UART_MCR_DTR) @@ -815,7 +815,7 @@ static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, { struct whiteheat_private *info = usb_get_serial_port_data(port); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (set & TIOCM_RTS) info->mcr |= UART_MCR_RTS; @@ -838,7 +838,7 @@ static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, un struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; - dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); + dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); switch (cmd) { case TIOCGSERIAL: @@ -880,7 +880,7 @@ static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, un static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios) { - dbg("%s -port %d", __FUNCTION__, port->number); + dbg("%s -port %d", __func__, port->number); firm_setup_port(port); } @@ -898,7 +898,7 @@ static int whiteheat_chars_in_buffer(struct usb_serial_port *port) int chars = 0; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&info->lock, flags); list_for_each(tmp, &info->tx_urbs_submitted) { @@ -907,7 +907,7 @@ static int whiteheat_chars_in_buffer(struct usb_serial_port *port) } spin_unlock_irqrestore(&info->lock, flags); - dbg ("%s - returns %d", __FUNCTION__, chars); + dbg ("%s - returns %d", __func__, chars); return chars; } @@ -917,7 +917,7 @@ static void whiteheat_throttle (struct usb_serial_port *port) struct whiteheat_private *info = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&info->lock, flags); info->flags |= THROTTLED; @@ -933,7 +933,7 @@ static void whiteheat_unthrottle (struct usb_serial_port *port) int actually_throttled; unsigned long flags; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&info->lock, flags); actually_throttled = info->flags & ACTUALLY_THROTTLED; @@ -954,7 +954,7 @@ static void command_port_write_callback(struct urb *urb) { int status = urb->status; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (status) { dbg("nonzero urb status: %d", status); @@ -971,22 +971,22 @@ static void command_port_read_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int result; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); command_info = usb_get_serial_port_data(command_port); if (!command_info) { - dbg ("%s - command_info is NULL, exiting.", __FUNCTION__); + dbg ("%s - command_info is NULL, exiting.", __func__); return; } if (status) { - dbg("%s - nonzero urb status: %d", __FUNCTION__, status); + dbg("%s - nonzero urb status: %d", __func__, status); if (status != -ENOENT) command_info->command_finished = WHITEHEAT_CMD_FAILURE; wake_up(&command_info->wait_command); return; } - usb_serial_debug_data(debug, &command_port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &command_port->dev, __func__, urb->actual_length, data); if (data[0] == WHITEHEAT_CMD_COMPLETE) { command_info->command_finished = WHITEHEAT_CMD_COMPLETE; @@ -996,20 +996,20 @@ static void command_port_read_callback(struct urb *urb) wake_up(&command_info->wait_command); } else if (data[0] == WHITEHEAT_EVENT) { /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ - dbg("%s - event received", __FUNCTION__); + dbg("%s - event received", __func__); } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); command_info->command_finished = WHITEHEAT_CMD_COMPLETE; wake_up(&command_info->wait_command); } else { - dbg("%s - bad reply from firmware", __FUNCTION__); + dbg("%s - bad reply from firmware", __func__); } /* Continue trying to always read */ command_port->read_urb->dev = command_port->serial->dev; result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); if (result) - dbg("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); + dbg("%s - failed resubmitting read urb, error %d", __func__, result); } @@ -1021,13 +1021,13 @@ static void whiteheat_read_callback(struct urb *urb) struct whiteheat_private *info = usb_get_serial_port_data(port); int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock(&info->lock); wrap = urb_to_wrap(urb, &info->rx_urbs_submitted); if (!wrap) { spin_unlock(&info->lock); - err("%s - Not my urb!", __FUNCTION__); + err("%s - Not my urb!", __func__); return; } list_del(&wrap->list); @@ -1035,14 +1035,14 @@ static void whiteheat_read_callback(struct urb *urb) if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); spin_lock(&info->lock); list_add(&wrap->list, &info->rx_urbs_free); spin_unlock(&info->lock); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); spin_lock(&info->lock); list_add_tail(&wrap->list, &info->rx_urb_q); @@ -1064,13 +1064,13 @@ static void whiteheat_write_callback(struct urb *urb) struct whiteheat_urb_wrap *wrap; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); spin_lock(&info->lock); wrap = urb_to_wrap(urb, &info->tx_urbs_submitted); if (!wrap) { spin_unlock(&info->lock); - err("%s - Not my urb!", __FUNCTION__); + err("%s - Not my urb!", __func__); return; } list_move(&wrap->list, &info->tx_urbs_free); @@ -1078,7 +1078,7 @@ static void whiteheat_write_callback(struct urb *urb) if (status) { dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } @@ -1098,7 +1098,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *d int retval = 0; int t; - dbg("%s - command %d", __FUNCTION__, command); + dbg("%s - command %d", __func__, command); command_port = port->serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); @@ -1112,7 +1112,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *d command_port->write_urb->dev = port->serial->dev; retval = usb_submit_urb (command_port->write_urb, GFP_NOIO); if (retval) { - dbg("%s - submit urb failed", __FUNCTION__); + dbg("%s - submit urb failed", __func__); goto exit; } @@ -1123,19 +1123,19 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *d usb_kill_urb(command_port->write_urb); if (command_info->command_finished == false) { - dbg("%s - command timed out.", __FUNCTION__); + dbg("%s - command timed out.", __func__); retval = -ETIMEDOUT; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { - dbg("%s - command failed.", __FUNCTION__); + dbg("%s - command failed.", __func__); retval = -EIO; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { - dbg("%s - command completed.", __FUNCTION__); + dbg("%s - command completed.", __func__); switch (command) { case WHITEHEAT_GET_DTR_RTS: info = usb_get_serial_port_data(port); @@ -1180,7 +1180,7 @@ static int firm_setup_port(struct usb_serial_port *port) { default: case CS8: port_settings.bits = 8; break; } - dbg("%s - data bits = %d", __FUNCTION__, port_settings.bits); + dbg("%s - data bits = %d", __func__, port_settings.bits); /* determine the parity */ if (cflag & PARENB) @@ -1196,21 +1196,21 @@ static int firm_setup_port(struct usb_serial_port *port) { port_settings.parity = WHITEHEAT_PAR_EVEN; else port_settings.parity = WHITEHEAT_PAR_NONE; - dbg("%s - parity = %c", __FUNCTION__, port_settings.parity); + dbg("%s - parity = %c", __func__, port_settings.parity); /* figure out the stop bits requested */ if (cflag & CSTOPB) port_settings.stop = 2; else port_settings.stop = 1; - dbg("%s - stop bits = %d", __FUNCTION__, port_settings.stop); + dbg("%s - stop bits = %d", __func__, port_settings.stop); /* figure out the flow control settings */ if (cflag & CRTSCTS) port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS); else port_settings.hflow = WHITEHEAT_HFLOW_NONE; - dbg("%s - hardware flow control = %s %s %s %s", __FUNCTION__, + dbg("%s - hardware flow control = %s %s %s %s", __func__, (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", @@ -1221,15 +1221,15 @@ static int firm_setup_port(struct usb_serial_port *port) { port_settings.sflow = WHITEHEAT_SFLOW_RXTX; else port_settings.sflow = WHITEHEAT_SFLOW_NONE; - dbg("%s - software flow control = %c", __FUNCTION__, port_settings.sflow); + dbg("%s - software flow control = %c", __func__, port_settings.sflow); port_settings.xon = START_CHAR(port->tty); port_settings.xoff = STOP_CHAR(port->tty); - dbg("%s - XON = %2x, XOFF = %2x", __FUNCTION__, port_settings.xon, port_settings.xoff); + dbg("%s - XON = %2x, XOFF = %2x", __func__, port_settings.xon, port_settings.xoff); /* get the baud rate wanted */ port_settings.baud = tty_get_baud_rate(port->tty); - dbg("%s - baud rate = %d", __FUNCTION__, port_settings.baud); + dbg("%s - baud rate = %d", __func__, port_settings.baud); /* fixme: should set validated settings */ tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud); @@ -1312,7 +1312,7 @@ static int start_command_port(struct usb_serial *serial) command_port->read_urb->dev = serial->dev; retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); if (retval) { - err("%s - failed submitting read urb, error %d", __FUNCTION__, retval); + err("%s - failed submitting read urb, error %d", __func__, retval); goto exit; } } @@ -1448,7 +1448,7 @@ static void rx_data_softint(struct work_struct *work) urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); + err("%s - failed resubmitting read urb, error %d", __func__, result); spin_lock_irqsave(&info->lock, flags); list_add(tmp, &info->rx_urbs_free); continue; diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 521f0297aef9..3fcde9f0fa5f 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -228,12 +228,12 @@ static int queuecommand(struct scsi_cmnd *srb, { struct us_data *us = host_to_us(srb->device->host); - US_DEBUGP("%s called\n", __FUNCTION__); + US_DEBUGP("%s called\n", __func__); /* check for state-transition errors */ if (us->srb != NULL) { printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n", - __FUNCTION__, us->srb); + __func__, us->srb); return SCSI_MLQUEUE_HOST_BUSY; } @@ -262,7 +262,7 @@ static int command_abort(struct scsi_cmnd *srb) { struct us_data *us = host_to_us(srb->device->host); - US_DEBUGP("%s called\n", __FUNCTION__); + US_DEBUGP("%s called\n", __func__); /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING * bits are protected by the host lock. */ @@ -299,7 +299,7 @@ static int device_reset(struct scsi_cmnd *srb) struct us_data *us = host_to_us(srb->device->host); int result; - US_DEBUGP("%s called\n", __FUNCTION__); + US_DEBUGP("%s called\n", __func__); /* lock the device pointers and do the reset */ mutex_lock(&(us->dev_mutex)); @@ -315,7 +315,7 @@ static int bus_reset(struct scsi_cmnd *srb) struct us_data *us = host_to_us(srb->device->host); int result; - US_DEBUGP("%s called\n", __FUNCTION__); + US_DEBUGP("%s called\n", __func__); result = usb_stor_port_reset(us); return result < 0 ? FAILED : SUCCESS; } diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 4628f03b13bf..db55ec39bb83 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -198,7 +198,7 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe, int status; US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", - __FUNCTION__, request, requesttype, + __func__, request, requesttype, value, index, size); /* fill in the devrequest structure */ @@ -250,7 +250,7 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0); - US_DEBUGP("%s: result = %d\n", __FUNCTION__, result); + US_DEBUGP("%s: result = %d\n", __func__, result); return result; } @@ -332,7 +332,7 @@ int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, int result; US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", - __FUNCTION__, request, requesttype, + __func__, request, requesttype, value, index, size); /* fill in the devrequest structure */ @@ -366,7 +366,7 @@ static int usb_stor_intr_transfer(struct us_data *us, void *buf, unsigned int pipe = us->recv_intr_pipe; unsigned int maxp; - US_DEBUGP("%s: xfer %u bytes\n", __FUNCTION__, length); + US_DEBUGP("%s: xfer %u bytes\n", __func__, length); /* calculate the max packet size */ maxp = usb_maxpacket(us->pusb_dev, pipe, usb_pipeout(pipe)); @@ -393,7 +393,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, { int result; - US_DEBUGP("%s: xfer %u bytes\n", __FUNCTION__, length); + US_DEBUGP("%s: xfer %u bytes\n", __func__, length); /* fill and submit the URB */ usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length, @@ -424,7 +424,7 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe, return USB_STOR_XFER_ERROR; /* initialize the scatter-gather request block */ - US_DEBUGP("%s: xfer %u bytes, %d entries\n", __FUNCTION__, + US_DEBUGP("%s: xfer %u bytes, %d entries\n", __func__, length, num_sg); result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0, sg, num_sg, length, GFP_NOIO); @@ -701,7 +701,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) /* Stop the current URB transfer */ void usb_stor_stop_transport(struct us_data *us) { - US_DEBUGP("%s called\n", __FUNCTION__); + US_DEBUGP("%s called\n", __func__); /* If the state machine is blocked waiting for an URB, * let's wake it up. The test_and_clear_bit() call @@ -1135,7 +1135,7 @@ static int usb_stor_reset_common(struct us_data *us, int usb_stor_CB_reset(struct us_data *us) { - US_DEBUGP("%s called\n", __FUNCTION__); + US_DEBUGP("%s called\n", __func__); memset(us->iobuf, 0xFF, CB_RESET_CMD_SIZE); us->iobuf[0] = SEND_DIAGNOSTIC; @@ -1150,7 +1150,7 @@ int usb_stor_CB_reset(struct us_data *us) */ int usb_stor_Bulk_reset(struct us_data *us) { - US_DEBUGP("%s called\n", __FUNCTION__); + US_DEBUGP("%s called\n", __func__); return usb_stor_reset_common(us, US_BULK_RESET_REQUEST, USB_TYPE_CLASS | USB_RECIP_INTERFACE, diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index f59593de3b8f..a856effad3bd 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -190,7 +190,7 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message) /* Wait until no command is running */ mutex_lock(&us->dev_mutex); - US_DEBUGP("%s\n", __FUNCTION__); + US_DEBUGP("%s\n", __func__); if (us->suspend_resume_hook) (us->suspend_resume_hook)(us, US_SUSPEND); @@ -207,7 +207,7 @@ static int storage_resume(struct usb_interface *iface) mutex_lock(&us->dev_mutex); - US_DEBUGP("%s\n", __FUNCTION__); + US_DEBUGP("%s\n", __func__); if (us->suspend_resume_hook) (us->suspend_resume_hook)(us, US_RESUME); @@ -219,7 +219,7 @@ static int storage_reset_resume(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s\n", __FUNCTION__); + US_DEBUGP("%s\n", __func__); /* Report the reset to the SCSI core */ usb_stor_report_bus_reset(us); @@ -240,7 +240,7 @@ static int storage_pre_reset(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s\n", __FUNCTION__); + US_DEBUGP("%s\n", __func__); /* Make sure no command runs during the reset */ mutex_lock(&us->dev_mutex); @@ -251,7 +251,7 @@ static int storage_post_reset(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s\n", __FUNCTION__); + US_DEBUGP("%s\n", __func__); /* Report the reset to the SCSI core */ usb_stor_report_bus_reset(us); @@ -437,7 +437,7 @@ SkipForAbort: /* Associate our private data with the USB device */ static int associate_dev(struct us_data *us, struct usb_interface *intf) { - US_DEBUGP("-- %s\n", __FUNCTION__); + US_DEBUGP("-- %s\n", __func__); /* Fill in the device-related fields */ us->pusb_dev = interface_to_usbdev(intf); @@ -816,7 +816,7 @@ static int usb_stor_acquire_resources(struct us_data *us) /* Release all our dynamic resources */ static void usb_stor_release_resources(struct us_data *us) { - US_DEBUGP("-- %s\n", __FUNCTION__); + US_DEBUGP("-- %s\n", __func__); /* Tell the control thread to exit. The SCSI host must * already have been removed so it won't try to queue @@ -842,7 +842,7 @@ static void usb_stor_release_resources(struct us_data *us) /* Dissociate from the USB device */ static void dissociate_dev(struct us_data *us) { - US_DEBUGP("-- %s\n", __FUNCTION__); + US_DEBUGP("-- %s\n", __func__); kfree(us->sensebuf); diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index c815a40e167f..73e6a66d95a7 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -88,7 +88,7 @@ static int skel_open(struct inode *inode, struct file *file) interface = usb_find_interface(&skel_driver, subminor); if (!interface) { err ("%s - error, can't find device for minor %d", - __FUNCTION__, subminor); + __func__, subminor); retval = -ENODEV; goto exit; } @@ -220,7 +220,7 @@ static void skel_write_bulk_callback(struct urb *urb) urb->status == -ECONNRESET || urb->status == -ESHUTDOWN)) err("%s - nonzero write bulk status received: %d", - __FUNCTION__, urb->status); + __func__, urb->status); spin_lock(&dev->err_lock); dev->errors = urb->status; @@ -301,7 +301,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou retval = usb_submit_urb(urb, GFP_KERNEL); mutex_unlock(&dev->io_mutex); if (retval) { - err("%s - failed submitting write urb, error %d", __FUNCTION__, retval); + err("%s - failed submitting write urb, error %d", __func__, retval); goto error_unanchor; } -- cgit v1.2.3