From 4d5bdb384813f1928016661f28fd45f8327c081d Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Mon, 17 May 2010 01:22:11 +0000 Subject: qlcnic: module param for firmware load option By default fw is loaded from flash, user can change this priority using load_fw_file module param. Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/qlcnic/qlcnic_main.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c index 0a52d24cae78..b076474389b9 100644 --- a/drivers/net/qlcnic/qlcnic_main.c +++ b/drivers/net/qlcnic/qlcnic_main.c @@ -61,6 +61,10 @@ static int auto_fw_reset = AUTO_FW_RESET_ENABLED; module_param(auto_fw_reset, int, 0644); MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled"); +static int load_fw_file; +module_param(load_fw_file, int, 0644); +MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file"); + static int __devinit qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent); static void __devexit qlcnic_remove(struct pci_dev *pdev); @@ -585,7 +589,10 @@ qlcnic_start_firmware(struct qlcnic_adapter *adapter) /* This is the first boot after power up */ QLCWR32(adapter, QLCNIC_CAM_RAM(0x1fc), QLCNIC_BDINFO_MAGIC); - qlcnic_request_firmware(adapter); + if (load_fw_file) + qlcnic_request_firmware(adapter); + else + adapter->fw_type = QLCNIC_FLASH_ROMIMAGE; err = qlcnic_need_fw_reset(adapter); if (err < 0) -- cgit v1.2.3