From 5deeac99fe1146532eb7c64f9adb17d17628d751 Mon Sep 17 00:00:00 2001 From: Andrew Clayton Date: Wed, 10 Feb 2010 23:18:05 -0800 Subject: Input: rotary-encoder - set gpio direction for each requested gpio Even with the correct pin mux settings, you still need to explicitly set the gpio direction. Call gpio_direction_input() after each requested gpio. Signed-off-by: Andrew Clayton Signed-off-by: Mark Somerville Tested-by: H Hartley Sweeten Acked-by: Daniel Mack Signed-off-by: Dmitry Torokhov --- drivers/input/misc/rotary_encoder.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c index 3b9f588fc747..4ae07935985e 100644 --- a/drivers/input/misc/rotary_encoder.c +++ b/drivers/input/misc/rotary_encoder.c @@ -152,6 +152,13 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev) goto exit_unregister_input; } + err = gpio_direction_input(pdata->gpio_a); + if (err) { + dev_err(&pdev->dev, "unable to set GPIO %d for input\n", + pdata->gpio_a); + goto exit_unregister_input; + } + err = gpio_request(pdata->gpio_b, DRV_NAME); if (err) { dev_err(&pdev->dev, "unable to request GPIO %d\n", @@ -159,6 +166,13 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev) goto exit_free_gpio_a; } + err = gpio_direction_input(pdata->gpio_b); + if (err) { + dev_err(&pdev->dev, "unable to set GPIO %d for input\n", + pdata->gpio_b); + goto exit_free_gpio_a; + } + /* request the IRQs */ err = request_irq(encoder->irq_a, &rotary_encoder_irq, IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, -- cgit v1.2.3