From 8c7de408fd2caa11b8b3a1ed8a1b141ce127ad4e Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Mon, 13 Jun 2011 08:43:49 -0700 Subject: sis*: Move the Silicon Integrated Systems (SiS) drivers Move the SiS drivers into drivers/net/ethernet/sis/ and make the necessary Kconfig and Makefile changes CC: Daniele Venzano CC: Francois Romieu Signed-off-by: Jeff Kirsher --- drivers/net/Kconfig | 30 - drivers/net/Makefile | 2 - drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/sis/Kconfig | 50 + drivers/net/ethernet/sis/Makefile | 6 + drivers/net/ethernet/sis/sis190.c | 1956 +++++++++++++++++++++++++++++ drivers/net/ethernet/sis/sis900.c | 2494 +++++++++++++++++++++++++++++++++++++ drivers/net/ethernet/sis/sis900.h | 329 +++++ drivers/net/sis190.c | 1956 ----------------------------- drivers/net/sis900.c | 2494 ------------------------------------- drivers/net/sis900.h | 329 ----- 12 files changed, 4837 insertions(+), 4811 deletions(-) create mode 100644 drivers/net/ethernet/sis/Kconfig create mode 100644 drivers/net/ethernet/sis/Makefile create mode 100644 drivers/net/ethernet/sis/sis190.c create mode 100644 drivers/net/ethernet/sis/sis900.c create mode 100644 drivers/net/ethernet/sis/sis900.h delete mode 100644 drivers/net/sis190.c delete mode 100644 drivers/net/sis900.c delete mode 100644 drivers/net/sis900.h (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 1e1df3d79850..33df2547e30e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -500,22 +500,6 @@ config R6040 To compile this driver as a module, choose M here: the module will be called r6040. This is recommended. -config SIS900 - tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" - depends on NET_PCI && PCI - select CRC32 - select MII - ---help--- - This is a driver for the Fast Ethernet PCI network cards based on - the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in - SiS 630 and SiS 540 chipsets. - - This driver also supports AMD 79C901 HomePNA so that you can use - your phone line as a network cable. - - To compile this driver as a module, choose M here: the module - will be called sis900. This is recommended. - config TLAN tristate "TI ThunderLAN support" depends on NET_PCI && (PCI || EISA) @@ -639,20 +623,6 @@ config YELLOWFIN To compile this driver as a module, choose M here: the module will be called yellowfin. This is recommended. -config SIS190 - tristate "SiS190/SiS191 gigabit ethernet support" - depends on PCI - select CRC32 - select MII - ---help--- - Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or - a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to - appear in lan on motherboard designs which are based on SiS 965 - and SiS 966 south bridge. - - To compile this driver as a module, choose M here: the module - will be called sis190. This is recommended. - config TSI108_ETH tristate "Tundra TSI108 gigabit Ethernet support" depends on TSI108_BRIDGE diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 275ed4a548ae..3b14f1a2aa53 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -24,8 +24,6 @@ obj-$(CONFIG_PLIP) += plip.o obj-$(CONFIG_ROADRUNNER) += rrunner.o obj-$(CONFIG_TLAN) += tlan.o -obj-$(CONFIG_SIS190) += sis190.o -obj-$(CONFIG_SIS900) += sis900.o obj-$(CONFIG_R6040) += r6040.o obj-$(CONFIG_YELLOWFIN) += yellowfin.o obj-$(CONFIG_FEALNX) += fealnx.o diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 97542479c01f..b15b1e2ed398 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -42,6 +42,7 @@ source "drivers/net/ethernet/qlogic/Kconfig" source "drivers/net/ethernet/racal/Kconfig" source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/seeq/Kconfig" +source "drivers/net/ethernet/sis/Kconfig" source "drivers/net/ethernet/sfc/Kconfig" source "drivers/net/ethernet/sgi/Kconfig" source "drivers/net/ethernet/smsc/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 7e7a319e7187..1f45ec9a9dca 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/ +obj-$(CONFIG_NET_VENDOR_SIS) += sis/ obj-$(CONFIG_SFC) += sfc/ obj-$(CONFIG_NET_VENDOR_SGI) += sgi/ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/ diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig new file mode 100644 index 000000000000..01d43e870eeb --- /dev/null +++ b/drivers/net/ethernet/sis/Kconfig @@ -0,0 +1,50 @@ +# +# Silicon Integrated Systems (SiS) device configuration +# + +config NET_VENDOR_SIS + bool "Silicon Integrated Systems (SiS) devices" + depends on PCI + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about SiS devices. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_SIS + +config SIS900 + tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" + depends on PCI + select CRC32 + select MII + ---help--- + This is a driver for the Fast Ethernet PCI network cards based on + the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in + SiS 630 and SiS 540 chipsets. + + This driver also supports AMD 79C901 HomePNA so that you can use + your phone line as a network cable. + + To compile this driver as a module, choose M here: the module + will be called sis900. This is recommended. + +config SIS190 + tristate "SiS190/SiS191 gigabit ethernet support" + depends on PCI + select CRC32 + select MII + ---help--- + Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or + a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to + appear in lan on motherboard designs which are based on SiS 965 + and SiS 966 south bridge. + + To compile this driver as a module, choose M here: the module + will be called sis190. This is recommended. + +endif # NET_VENDOR_SIS diff --git a/drivers/net/ethernet/sis/Makefile b/drivers/net/ethernet/sis/Makefile new file mode 100644 index 000000000000..58d3ac1985df --- /dev/null +++ b/drivers/net/ethernet/sis/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for Silicon Integrated Systems (SiS) network device drivers. +# + +obj-$(CONFIG_SIS190) += sis190.o +obj-$(CONFIG_SIS900) += sis900.o diff --git a/drivers/net/ethernet/sis/sis190.c b/drivers/net/ethernet/sis/sis190.c new file mode 100644 index 000000000000..3c0f1312b391 --- /dev/null +++ b/drivers/net/ethernet/sis/sis190.c @@ -0,0 +1,1956 @@ +/* + sis190.c: Silicon Integrated Systems SiS190 ethernet driver + + Copyright (c) 2003 K.M. Liu + Copyright (c) 2003, 2004 Jeff Garzik + Copyright (c) 2003, 2004, 2005 Francois Romieu + + Based on r8169.c, tg3.c, 8139cp.c, skge.c, epic100.c and SiS 190/191 + genuine driver. + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + See the file COPYING in this distribution for more information. + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PHY_MAX_ADDR 32 +#define PHY_ID_ANY 0x1f +#define MII_REG_ANY 0x1f + +#define DRV_VERSION "1.4" +#define DRV_NAME "sis190" +#define SIS190_DRIVER_NAME DRV_NAME " Gigabit Ethernet driver " DRV_VERSION + +#define sis190_rx_skb netif_rx +#define sis190_rx_quota(count, quota) count + +#define MAC_ADDR_LEN 6 + +#define NUM_TX_DESC 64 /* [8..1024] */ +#define NUM_RX_DESC 64 /* [8..8192] */ +#define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) +#define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) +#define RX_BUF_SIZE 1536 +#define RX_BUF_MASK 0xfff8 + +#define SIS190_REGS_SIZE 0x80 +#define SIS190_TX_TIMEOUT (6*HZ) +#define SIS190_PHY_TIMEOUT (10*HZ) +#define SIS190_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | \ + NETIF_MSG_LINK | NETIF_MSG_IFUP | \ + NETIF_MSG_IFDOWN) + +/* Enhanced PHY access register bit definitions */ +#define EhnMIIread 0x0000 +#define EhnMIIwrite 0x0020 +#define EhnMIIdataShift 16 +#define EhnMIIpmdShift 6 /* 7016 only */ +#define EhnMIIregShift 11 +#define EhnMIIreq 0x0010 +#define EhnMIInotDone 0x0010 + +/* Write/read MMIO register */ +#define SIS_W8(reg, val) writeb ((val), ioaddr + (reg)) +#define SIS_W16(reg, val) writew ((val), ioaddr + (reg)) +#define SIS_W32(reg, val) writel ((val), ioaddr + (reg)) +#define SIS_R8(reg) readb (ioaddr + (reg)) +#define SIS_R16(reg) readw (ioaddr + (reg)) +#define SIS_R32(reg) readl (ioaddr + (reg)) + +#define SIS_PCI_COMMIT() SIS_R32(IntrControl) + +enum sis190_registers { + TxControl = 0x00, + TxDescStartAddr = 0x04, + rsv0 = 0x08, // reserved + TxSts = 0x0c, // unused (Control/Status) + RxControl = 0x10, + RxDescStartAddr = 0x14, + rsv1 = 0x18, // reserved + RxSts = 0x1c, // unused + IntrStatus = 0x20, + IntrMask = 0x24, + IntrControl = 0x28, + IntrTimer = 0x2c, // unused (Interrupt Timer) + PMControl = 0x30, // unused (Power Mgmt Control/Status) + rsv2 = 0x34, // reserved + ROMControl = 0x38, + ROMInterface = 0x3c, + StationControl = 0x40, + GMIIControl = 0x44, + GIoCR = 0x48, // unused (GMAC IO Compensation) + GIoCtrl = 0x4c, // unused (GMAC IO Control) + TxMacControl = 0x50, + TxLimit = 0x54, // unused (Tx MAC Timer/TryLimit) + RGDelay = 0x58, // unused (RGMII Tx Internal Delay) + rsv3 = 0x5c, // reserved + RxMacControl = 0x60, + RxMacAddr = 0x62, + RxHashTable = 0x68, + // Undocumented = 0x6c, + RxWolCtrl = 0x70, + RxWolData = 0x74, // unused (Rx WOL Data Access) + RxMPSControl = 0x78, // unused (Rx MPS Control) + rsv4 = 0x7c, // reserved +}; + +enum sis190_register_content { + /* IntrStatus */ + SoftInt = 0x40000000, // unused + Timeup = 0x20000000, // unused + PauseFrame = 0x00080000, // unused + MagicPacket = 0x00040000, // unused + WakeupFrame = 0x00020000, // unused + LinkChange = 0x00010000, + RxQEmpty = 0x00000080, + RxQInt = 0x00000040, + TxQ1Empty = 0x00000020, // unused + TxQ1Int = 0x00000010, + TxQ0Empty = 0x00000008, // unused + TxQ0Int = 0x00000004, + RxHalt = 0x00000002, + TxHalt = 0x00000001, + + /* {Rx/Tx}CmdBits */ + CmdReset = 0x10, + CmdRxEnb = 0x08, // unused + CmdTxEnb = 0x01, + RxBufEmpty = 0x01, // unused + + /* Cfg9346Bits */ + Cfg9346_Lock = 0x00, // unused + Cfg9346_Unlock = 0xc0, // unused + + /* RxMacControl */ + AcceptErr = 0x20, // unused + AcceptRunt = 0x10, // unused + AcceptBroadcast = 0x0800, + AcceptMulticast = 0x0400, + AcceptMyPhys = 0x0200, + AcceptAllPhys = 0x0100, + + /* RxConfigBits */ + RxCfgFIFOShift = 13, + RxCfgDMAShift = 8, // 0x1a in RxControl ? + + /* TxConfigBits */ + TxInterFrameGapShift = 24, + TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ + + LinkStatus = 0x02, // unused + FullDup = 0x01, // unused + + /* TBICSRBit */ + TBILinkOK = 0x02000000, // unused +}; + +struct TxDesc { + __le32 PSize; + __le32 status; + __le32 addr; + __le32 size; +}; + +struct RxDesc { + __le32 PSize; + __le32 status; + __le32 addr; + __le32 size; +}; + +enum _DescStatusBit { + /* _Desc.status */ + OWNbit = 0x80000000, // RXOWN/TXOWN + INTbit = 0x40000000, // RXINT/TXINT + CRCbit = 0x00020000, // CRCOFF/CRCEN + PADbit = 0x00010000, // PREADD/PADEN + /* _Desc.size */ + RingEnd = 0x80000000, + /* TxDesc.status */ + LSEN = 0x08000000, // TSO ? -- FR + IPCS = 0x04000000, + TCPCS = 0x02000000, + UDPCS = 0x01000000, + BSTEN = 0x00800000, + EXTEN = 0x00400000, + DEFEN = 0x00200000, + BKFEN = 0x00100000, + CRSEN = 0x00080000, + COLEN = 0x00040000, + THOL3 = 0x30000000, + THOL2 = 0x20000000, + THOL1 = 0x10000000, + THOL0 = 0x00000000, + + WND = 0x00080000, + TABRT = 0x00040000, + FIFO = 0x00020000, + LINK = 0x00010000, + ColCountMask = 0x0000ffff, + /* RxDesc.status */ + IPON = 0x20000000, + TCPON = 0x10000000, + UDPON = 0x08000000, + Wakup = 0x00400000, + Magic = 0x00200000, + Pause = 0x00100000, + DEFbit = 0x00200000, + BCAST = 0x000c0000, + MCAST = 0x00080000, + UCAST = 0x00040000, + /* RxDesc.PSize */ + TAGON = 0x80000000, + RxDescCountMask = 0x7f000000, // multi-desc pkt when > 1 ? -- FR + ABORT = 0x00800000, + SHORT = 0x00400000, + LIMIT = 0x00200000, + MIIER = 0x00100000, + OVRUN = 0x00080000, + NIBON = 0x00040000, + COLON = 0x00020000, + CRCOK = 0x00010000, + RxSizeMask = 0x0000ffff + /* + * The asic could apparently do vlan, TSO, jumbo (sis191 only) and + * provide two (unused with Linux) Tx queues. No publicly + * available documentation alas. + */ +}; + +enum sis190_eeprom_access_register_bits { + EECS = 0x00000001, // unused + EECLK = 0x00000002, // unused + EEDO = 0x00000008, // unused + EEDI = 0x00000004, // unused + EEREQ = 0x00000080, + EEROP = 0x00000200, + EEWOP = 0x00000100 // unused +}; + +/* EEPROM Addresses */ +enum sis190_eeprom_address { + EEPROMSignature = 0x00, + EEPROMCLK = 0x01, // unused + EEPROMInfo = 0x02, + EEPROMMACAddr = 0x03 +}; + +enum sis190_feature { + F_HAS_RGMII = 1, + F_PHY_88E1111 = 2, + F_PHY_BCM5461 = 4 +}; + +struct sis190_private { + void __iomem *mmio_addr; + struct pci_dev *pci_dev; + struct net_device *dev; + spinlock_t lock; + u32 rx_buf_sz; + u32 cur_rx; + u32 cur_tx; + u32 dirty_rx; + u32 dirty_tx; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + struct RxDesc *RxDescRing; + struct TxDesc *TxDescRing; + struct sk_buff *Rx_skbuff[NUM_RX_DESC]; + struct sk_buff *Tx_skbuff[NUM_TX_DESC]; + struct work_struct phy_task; + struct timer_list timer; + u32 msg_enable; + struct mii_if_info mii_if; + struct list_head first_phy; + u32 features; + u32 negotiated_lpa; + enum { + LNK_OFF, + LNK_ON, + LNK_AUTONEG, + } link_status; +}; + +struct sis190_phy { + struct list_head list; + int phy_id; + u16 id[2]; + u16 status; + u8 type; +}; + +enum sis190_phy_type { + UNKNOWN = 0x00, + HOME = 0x01, + LAN = 0x02, + MIX = 0x03 +}; + +static struct mii_chip_info { + const char *name; + u16 id[2]; + unsigned int type; + u32 feature; +} mii_chip_table[] = { + { "Atheros PHY", { 0x004d, 0xd010 }, LAN, 0 }, + { "Atheros PHY AR8012", { 0x004d, 0xd020 }, LAN, 0 }, + { "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN, F_PHY_BCM5461 }, + { "Broadcom PHY AC131", { 0x0143, 0xbc70 }, LAN, 0 }, + { "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN, 0 }, + { "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN, F_PHY_88E1111 }, + { "Realtek PHY RTL8201", { 0x0000, 0x8200 }, LAN, 0 }, + { NULL, } +}; + +static const struct { + const char *name; +} sis_chip_info[] = { + { "SiS 190 PCI Fast Ethernet adapter" }, + { "SiS 191 PCI Gigabit Ethernet adapter" }, +}; + +static DEFINE_PCI_DEVICE_TABLE(sis190_pci_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0191), 0, 0, 1 }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, sis190_pci_tbl); + +static int rx_copybreak = 200; + +static struct { + u32 msg_enable; +} debug = { -1 }; + +MODULE_DESCRIPTION("SiS sis190/191 Gigabit Ethernet driver"); +module_param(rx_copybreak, int, 0); +MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); +module_param_named(debug, debug.msg_enable, int, 0); +MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)"); +MODULE_AUTHOR("K.M. Liu , Ueimor "); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); + +static const u32 sis190_intr_mask = + RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt | LinkChange; + +/* + * Maximum number of multicast addresses to filter (vs. Rx-all-multicast). + * The chips use a 64 element hash table based on the Ethernet CRC. + */ +static const int multicast_filter_limit = 32; + +static void __mdio_cmd(void __iomem *ioaddr, u32 ctl) +{ + unsigned int i; + + SIS_W32(GMIIControl, ctl); + + msleep(1); + + for (i = 0; i < 100; i++) { + if (!(SIS_R32(GMIIControl) & EhnMIInotDone)) + break; + msleep(1); + } + + if (i > 99) + pr_err("PHY command failed !\n"); +} + +static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val) +{ + __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite | + (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift) | + (((u32) val) << EhnMIIdataShift)); +} + +static int mdio_read(void __iomem *ioaddr, int phy_id, int reg) +{ + __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread | + (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift)); + + return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift); +} + +static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val) +{ + struct sis190_private *tp = netdev_priv(dev); + + mdio_write(tp->mmio_addr, phy_id, reg, val); +} + +static int __mdio_read(struct net_device *dev, int phy_id, int reg) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mdio_read(tp->mmio_addr, phy_id, reg); +} + +static u16 mdio_read_latched(void __iomem *ioaddr, int phy_id, int reg) +{ + mdio_read(ioaddr, phy_id, reg); + return mdio_read(ioaddr, phy_id, reg); +} + +static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg) +{ + u16 data = 0xffff; + unsigned int i; + + if (!(SIS_R32(ROMControl) & 0x0002)) + return 0; + + SIS_W32(ROMInterface, EEREQ | EEROP | (reg << 10)); + + for (i = 0; i < 200; i++) { + if (!(SIS_R32(ROMInterface) & EEREQ)) { + data = (SIS_R32(ROMInterface) & 0xffff0000) >> 16; + break; + } + msleep(1); + } + + return data; +} + +static void sis190_irq_mask_and_ack(void __iomem *ioaddr) +{ + SIS_W32(IntrMask, 0x00); + SIS_W32(IntrStatus, 0xffffffff); + SIS_PCI_COMMIT(); +} + +static void sis190_asic_down(void __iomem *ioaddr) +{ + /* Stop the chip's Tx and Rx DMA processes. */ + + SIS_W32(TxControl, 0x1a00); + SIS_W32(RxControl, 0x1a00); + + sis190_irq_mask_and_ack(ioaddr); +} + +static void sis190_mark_as_last_descriptor(struct RxDesc *desc) +{ + desc->size |= cpu_to_le32(RingEnd); +} + +static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz) +{ + u32 eor = le32_to_cpu(desc->size) & RingEnd; + + desc->PSize = 0x0; + desc->size = cpu_to_le32((rx_buf_sz & RX_BUF_MASK) | eor); + wmb(); + desc->status = cpu_to_le32(OWNbit | INTbit); +} + +static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping, + u32 rx_buf_sz) +{ + desc->addr = cpu_to_le32(mapping); + sis190_give_to_asic(desc, rx_buf_sz); +} + +static inline void sis190_make_unusable_by_asic(struct RxDesc *desc) +{ + desc->PSize = 0x0; + desc->addr = cpu_to_le32(0xdeadbeef); + desc->size &= cpu_to_le32(RingEnd); + wmb(); + desc->status = 0x0; +} + +static struct sk_buff *sis190_alloc_rx_skb(struct sis190_private *tp, + struct RxDesc *desc) +{ + u32 rx_buf_sz = tp->rx_buf_sz; + struct sk_buff *skb; + dma_addr_t mapping; + + skb = netdev_alloc_skb(tp->dev, rx_buf_sz); + if (unlikely(!skb)) + goto skb_alloc_failed; + mapping = pci_map_single(tp->pci_dev, skb->data, tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(tp->pci_dev, mapping)) + goto out; + sis190_map_to_asic(desc, mapping, rx_buf_sz); + + return skb; + +out: + dev_kfree_skb_any(skb); +skb_alloc_failed: + sis190_make_unusable_by_asic(desc); + return NULL; +} + +static u32 sis190_rx_fill(struct sis190_private *tp, struct net_device *dev, + u32 start, u32 end) +{ + u32 cur; + + for (cur = start; cur < end; cur++) { + unsigned int i = cur % NUM_RX_DESC; + + if (tp->Rx_skbuff[i]) + continue; + + tp->Rx_skbuff[i] = sis190_alloc_rx_skb(tp, tp->RxDescRing + i); + + if (!tp->Rx_skbuff[i]) + break; + } + return cur - start; +} + +static bool sis190_try_rx_copy(struct sis190_private *tp, + struct sk_buff **sk_buff, int pkt_size, + dma_addr_t addr) +{ + struct sk_buff *skb; + bool done = false; + + if (pkt_size >= rx_copybreak) + goto out; + + skb = netdev_alloc_skb_ip_align(tp->dev, pkt_size); + if (!skb) + goto out; + + pci_dma_sync_single_for_cpu(tp->pci_dev, addr, tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + skb_copy_to_linear_data(skb, sk_buff[0]->data, pkt_size); + *sk_buff = skb; + done = true; +out: + return done; +} + +static inline int sis190_rx_pkt_err(u32 status, struct net_device_stats *stats) +{ +#define ErrMask (OVRUN | SHORT | LIMIT | MIIER | NIBON | COLON | ABORT) + + if ((status & CRCOK) && !(status & ErrMask)) + return 0; + + if (!(status & CRCOK)) + stats->rx_crc_errors++; + else if (status & OVRUN) + stats->rx_over_errors++; + else if (status & (SHORT | LIMIT)) + stats->rx_length_errors++; + else if (status & (MIIER | NIBON | COLON)) + stats->rx_frame_errors++; + + stats->rx_errors++; + return -1; +} + +static int sis190_rx_interrupt(struct net_device *dev, + struct sis190_private *tp, void __iomem *ioaddr) +{ + struct net_device_stats *stats = &dev->stats; + u32 rx_left, cur_rx = tp->cur_rx; + u32 delta, count; + + rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; + rx_left = sis190_rx_quota(rx_left, (u32) dev->quota); + + for (; rx_left > 0; rx_left--, cur_rx++) { + unsigned int entry = cur_rx % NUM_RX_DESC; + struct RxDesc *desc = tp->RxDescRing + entry; + u32 status; + + if (le32_to_cpu(desc->status) & OWNbit) + break; + + status = le32_to_cpu(desc->PSize); + + //netif_info(tp, intr, dev, "Rx PSize = %08x\n", status); + + if (sis190_rx_pkt_err(status, stats) < 0) + sis190_give_to_asic(desc, tp->rx_buf_sz); + else { + struct sk_buff *skb = tp->Rx_skbuff[entry]; + dma_addr_t addr = le32_to_cpu(desc->addr); + int pkt_size = (status & RxSizeMask) - 4; + struct pci_dev *pdev = tp->pci_dev; + + if (unlikely(pkt_size > tp->rx_buf_sz)) { + netif_info(tp, intr, dev, + "(frag) status = %08x\n", status); + stats->rx_dropped++; + stats->rx_length_errors++; + sis190_give_to_asic(desc, tp->rx_buf_sz); + continue; + } + + + if (sis190_try_rx_copy(tp, &skb, pkt_size, addr)) { + pci_dma_sync_single_for_device(pdev, addr, + tp->rx_buf_sz, PCI_DMA_FROMDEVICE); + sis190_give_to_asic(desc, tp->rx_buf_sz); + } else { + pci_unmap_single(pdev, addr, tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + tp->Rx_skbuff[entry] = NULL; + sis190_make_unusable_by_asic(desc); + } + + skb_put(skb, pkt_size); + skb->protocol = eth_type_trans(skb, dev); + + sis190_rx_skb(skb); + + stats->rx_packets++; + stats->rx_bytes += pkt_size; + if ((status & BCAST) == MCAST) + stats->multicast++; + } + } + count = cur_rx - tp->cur_rx; + tp->cur_rx = cur_rx; + + delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx); + if (!delta && count) + netif_info(tp, intr, dev, "no Rx buffer allocated\n"); + tp->dirty_rx += delta; + + if ((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) + netif_emerg(tp, intr, dev, "Rx buffers exhausted\n"); + + return count; +} + +static void sis190_unmap_tx_skb(struct pci_dev *pdev, struct sk_buff *skb, + struct TxDesc *desc) +{ + unsigned int len; + + len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + + pci_unmap_single(pdev, le32_to_cpu(desc->addr), len, PCI_DMA_TODEVICE); + + memset(desc, 0x00, sizeof(*desc)); +} + +static inline int sis190_tx_pkt_err(u32 status, struct net_device_stats *stats) +{ +#define TxErrMask (WND | TABRT | FIFO | LINK) + + if (!unlikely(status & TxErrMask)) + return 0; + + if (status & WND) + stats->tx_window_errors++; + if (status & TABRT) + stats->tx_aborted_errors++; + if (status & FIFO) + stats->tx_fifo_errors++; + if (status & LINK) + stats->tx_carrier_errors++; + + stats->tx_errors++; + + return -1; +} + +static void sis190_tx_interrupt(struct net_device *dev, + struct sis190_private *tp, void __iomem *ioaddr) +{ + struct net_device_stats *stats = &dev->stats; + u32 pending, dirty_tx = tp->dirty_tx; + /* + * It would not be needed if queueing was allowed to be enabled + * again too early (hint: think preempt and unclocked smp systems). + */ + unsigned int queue_stopped; + + smp_rmb(); + pending = tp->cur_tx - dirty_tx; + queue_stopped = (pending == NUM_TX_DESC); + + for (; pending; pending--, dirty_tx++) { + unsigned int entry = dirty_tx % NUM_TX_DESC; + struct TxDesc *txd = tp->TxDescRing + entry; + u32 status = le32_to_cpu(txd->status); + struct sk_buff *skb; + + if (status & OWNbit) + break; + + skb = tp->Tx_skbuff[entry]; + + if (likely(sis190_tx_pkt_err(status, stats) == 0)) { + stats->tx_packets++; + stats->tx_bytes += skb->len; + stats->collisions += ((status & ColCountMask) - 1); + } + + sis190_unmap_tx_skb(tp->pci_dev, skb, txd); + tp->Tx_skbuff[entry] = NULL; + dev_kfree_skb_irq(skb); + } + + if (tp->dirty_tx != dirty_tx) { + tp->dirty_tx = dirty_tx; + smp_wmb(); + if (queue_stopped) + netif_wake_queue(dev); + } +} + +/* + * The interrupt handler does all of the Rx thread work and cleans up after + * the Tx thread. + */ +static irqreturn_t sis190_interrupt(int irq, void *__dev) +{ + struct net_device *dev = __dev; + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned int handled = 0; + u32 status; + + status = SIS_R32(IntrStatus); + + if ((status == 0xffffffff) || !status) + goto out; + + handled = 1; + + if (unlikely(!netif_running(dev))) { + sis190_asic_down(ioaddr); + goto out; + } + + SIS_W32(IntrStatus, status); + +// netif_info(tp, intr, dev, "status = %08x\n", status); + + if (status & LinkChange) { + netif_info(tp, intr, dev, "link change\n"); + del_timer(&tp->timer); + schedule_work(&tp->phy_task); + } + + if (status & RxQInt) + sis190_rx_interrupt(dev, tp, ioaddr); + + if (status & TxQ0Int) + sis190_tx_interrupt(dev, tp, ioaddr); +out: + return IRQ_RETVAL(handled); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void sis190_netpoll(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + + disable_irq(pdev->irq); + sis190_interrupt(pdev->irq, dev); + enable_irq(pdev->irq); +} +#endif + +static void sis190_free_rx_skb(struct sis190_private *tp, + struct sk_buff **sk_buff, struct RxDesc *desc) +{ + struct pci_dev *pdev = tp->pci_dev; + + pci_unmap_single(pdev, le32_to_cpu(desc->addr), tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(*sk_buff); + *sk_buff = NULL; + sis190_make_unusable_by_asic(desc); +} + +static void sis190_rx_clear(struct sis190_private *tp) +{ + unsigned int i; + + for (i = 0; i < NUM_RX_DESC; i++) { + if (!tp->Rx_skbuff[i]) + continue; + sis190_free_rx_skb(tp, tp->Rx_skbuff + i, tp->RxDescRing + i); + } +} + +static void sis190_init_ring_indexes(struct sis190_private *tp) +{ + tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0; +} + +static int sis190_init_ring(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + sis190_init_ring_indexes(tp); + + memset(tp->Tx_skbuff, 0x0, NUM_TX_DESC * sizeof(struct sk_buff *)); + memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *)); + + if (sis190_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC) + goto err_rx_clear; + + sis190_mark_as_last_descriptor(tp->RxDescRing + NUM_RX_DESC - 1); + + return 0; + +err_rx_clear: + sis190_rx_clear(tp); + return -ENOMEM; +} + +static void sis190_set_rx_mode(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned long flags; + u32 mc_filter[2]; /* Multicast hash filter */ + u16 rx_mode; + + if (dev->flags & IFF_PROMISC) { + rx_mode = + AcceptBroadcast | AcceptMulticast | AcceptMyPhys | + AcceptAllPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else if ((netdev_mc_count(dev) > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to filter perfectly -- accept all multicasts. */ + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else { + struct netdev_hw_addr *ha; + + rx_mode = AcceptBroadcast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0; + netdev_for_each_mc_addr(ha, dev) { + int bit_nr = + ether_crc(ETH_ALEN, ha->addr) & 0x3f; + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + rx_mode |= AcceptMulticast; + } + } + + spin_lock_irqsave(&tp->lock, flags); + + SIS_W16(RxMacControl, rx_mode | 0x2); + SIS_W32(RxHashTable, mc_filter[0]); + SIS_W32(RxHashTable + 4, mc_filter[1]); + + spin_unlock_irqrestore(&tp->lock, flags); +} + +static void sis190_soft_reset(void __iomem *ioaddr) +{ + SIS_W32(IntrControl, 0x8000); + SIS_PCI_COMMIT(); + SIS_W32(IntrControl, 0x0); + sis190_asic_down(ioaddr); +} + +static void sis190_hw_start(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + + sis190_soft_reset(ioaddr); + + SIS_W32(TxDescStartAddr, tp->tx_dma); + SIS_W32(RxDescStartAddr, tp->rx_dma); + + SIS_W32(IntrStatus, 0xffffffff); + SIS_W32(IntrMask, 0x0); + SIS_W32(GMIIControl, 0x0); + SIS_W32(TxMacControl, 0x60); + SIS_W16(RxMacControl, 0x02); + SIS_W32(RxHashTable, 0x0); + SIS_W32(0x6c, 0x0); + SIS_W32(RxWolCtrl, 0x0); + SIS_W32(RxWolData, 0x0); + + SIS_PCI_COMMIT(); + + sis190_set_rx_mode(dev); + + /* Enable all known interrupts by setting the interrupt mask. */ + SIS_W32(IntrMask, sis190_intr_mask); + + SIS_W32(TxControl, 0x1a00 | CmdTxEnb); + SIS_W32(RxControl, 0x1a1d); + + netif_start_queue(dev); +} + +static void sis190_phy_task(struct work_struct *work) +{ + struct sis190_private *tp = + container_of(work, struct sis190_private, phy_task); + struct net_device *dev = tp->dev; + void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; + u16 val; + + rtnl_lock(); + + if (!netif_running(dev)) + goto out_unlock; + + val = mdio_read(ioaddr, phy_id, MII_BMCR); + if (val & BMCR_RESET) { + // FIXME: needlessly high ? -- FR 02/07/2005 + mod_timer(&tp->timer, jiffies + HZ/10); + goto out_unlock; + } + + val = mdio_read_latched(ioaddr, phy_id, MII_BMSR); + if (!(val & BMSR_ANEGCOMPLETE) && tp->link_status != LNK_AUTONEG) { + netif_carrier_off(dev); + netif_warn(tp, link, dev, "auto-negotiating...\n"); + tp->link_status = LNK_AUTONEG; + } else if ((val & BMSR_LSTATUS) && tp->link_status != LNK_ON) { + /* Rejoice ! */ + struct { + int val; + u32 ctl; + const char *msg; + } reg31[] = { + { LPA_1000FULL, 0x07000c00 | 0x00001000, + "1000 Mbps Full Duplex" }, + { LPA_1000HALF, 0x07000c00, + "1000 Mbps Half Duplex" }, + { LPA_100FULL, 0x04000800 | 0x00001000, + "100 Mbps Full Duplex" }, + { LPA_100HALF, 0x04000800, + "100 Mbps Half Duplex" }, + { LPA_10FULL, 0x04000400 | 0x00001000, + "10 Mbps Full Duplex" }, + { LPA_10HALF, 0x04000400, + "10 Mbps Half Duplex" }, + { 0, 0x04000400, "unknown" } + }, *p = NULL; + u16 adv, autoexp, gigadv, gigrec; + + val = mdio_read(ioaddr, phy_id, 0x1f); + netif_info(tp, link, dev, "mii ext = %04x\n", val); + + val = mdio_read(ioaddr, phy_id, MII_LPA); + adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE); + autoexp = mdio_read(ioaddr, phy_id, MII_EXPANSION); + netif_info(tp, link, dev, "mii lpa=%04x adv=%04x exp=%04x\n", + val, adv, autoexp); + + if (val & LPA_NPAGE && autoexp & EXPANSION_NWAY) { + /* check for gigabit speed */ + gigadv = mdio_read(ioaddr, phy_id, MII_CTRL1000); + gigrec = mdio_read(ioaddr, phy_id, MII_STAT1000); + val = (gigadv & (gigrec >> 2)); + if (val & ADVERTISE_1000FULL) + p = reg31; + else if (val & ADVERTISE_1000HALF) + p = reg31 + 1; + } + if (!p) { + val &= adv; + + for (p = reg31; p->val; p++) { + if ((val & p->val) == p->val) + break; + } + } + + p->ctl |= SIS_R32(StationControl) & ~0x0f001c00; + + if ((tp->features & F_HAS_RGMII) && + (tp->features & F_PHY_BCM5461)) { + // Set Tx Delay in RGMII mode. + mdio_write(ioaddr, phy_id, 0x18, 0xf1c7); + udelay(200); + mdio_write(ioaddr, phy_id, 0x1c, 0x8c00); + p->ctl |= 0x03000000; + } + + SIS_W32(StationControl, p->ctl); + + if (tp->features & F_HAS_RGMII) { + SIS_W32(RGDelay, 0x0441); + SIS_W32(RGDelay, 0x0440); + } + + tp->negotiated_lpa = p->val; + + netif_info(tp, link, dev, "link on %s mode\n", p->msg); + netif_carrier_on(dev); + tp->link_status = LNK_ON; + } else if (!(val & BMSR_LSTATUS) && tp->link_status != LNK_AUTONEG) + tp->link_status = LNK_OFF; + mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT); + +out_unlock: + rtnl_unlock(); +} + +static void sis190_phy_timer(unsigned long __opaque) +{ + struct net_device *dev = (struct net_device *)__opaque; + struct sis190_private *tp = netdev_priv(dev); + + if (likely(netif_running(dev))) + schedule_work(&tp->phy_task); +} + +static inline void sis190_delete_timer(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + del_timer_sync(&tp->timer); +} + +static inline void sis190_request_timer(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct timer_list *timer = &tp->timer; + + init_timer(timer); + timer->expires = jiffies + SIS190_PHY_TIMEOUT; + timer->data = (unsigned long)dev; + timer->function = sis190_phy_timer; + add_timer(timer); +} + +static void sis190_set_rxbufsize(struct sis190_private *tp, + struct net_device *dev) +{ + unsigned int mtu = dev->mtu; + + tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; + /* RxDesc->size has a licence to kill the lower bits */ + if (tp->rx_buf_sz & 0x07) { + tp->rx_buf_sz += 8; + tp->rx_buf_sz &= RX_BUF_MASK; + } +} + +static int sis190_open(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + int rc = -ENOMEM; + + sis190_set_rxbufsize(tp, dev); + + /* + * Rx and Tx descriptors need 256 bytes alignment. + * pci_alloc_consistent() guarantees a stronger alignment. + */ + tp->TxDescRing = pci_alloc_consistent(pdev, TX_RING_BYTES, &tp->tx_dma); + if (!tp->TxDescRing) + goto out; + + tp->RxDescRing = pci_alloc_consistent(pdev, RX_RING_BYTES, &tp->rx_dma); + if (!tp->RxDescRing) + goto err_free_tx_0; + + rc = sis190_init_ring(dev); + if (rc < 0) + goto err_free_rx_1; + + sis190_request_timer(dev); + + rc = request_irq(dev->irq, sis190_interrupt, IRQF_SHARED, dev->name, dev); + if (rc < 0) + goto err_release_timer_2; + + sis190_hw_start(dev); +out: + return rc; + +err_release_timer_2: + sis190_delete_timer(dev); + sis190_rx_clear(tp); +err_free_rx_1: + pci_free_consistent(tp->pci_dev, RX_RING_BYTES, tp->RxDescRing, + tp->rx_dma); +err_free_tx_0: + pci_free_consistent(tp->pci_dev, TX_RING_BYTES, tp->TxDescRing, + tp->tx_dma); + goto out; +} + +static void sis190_tx_clear(struct sis190_private *tp) +{ + unsigned int i; + + for (i = 0; i < NUM_TX_DESC; i++) { + struct sk_buff *skb = tp->Tx_skbuff[i]; + + if (!skb) + continue; + + sis190_unmap_tx_skb(tp->pci_dev, skb, tp->TxDescRing + i); + tp->Tx_skbuff[i] = NULL; + dev_kfree_skb(skb); + + tp->dev->stats.tx_dropped++; + } + tp->cur_tx = tp->dirty_tx = 0; +} + +static void sis190_down(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned int poll_locked = 0; + + sis190_delete_timer(dev); + + netif_stop_queue(dev); + + do { + spin_lock_irq(&tp->lock); + + sis190_asic_down(ioaddr); + + spin_unlock_irq(&tp->lock); + + synchronize_irq(dev->irq); + + if (!poll_locked) + poll_locked++; + + synchronize_sched(); + + } while (SIS_R32(IntrMask)); + + sis190_tx_clear(tp); + sis190_rx_clear(tp); +} + +static int sis190_close(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + + sis190_down(dev); + + free_irq(dev->irq, dev); + + pci_free_consistent(pdev, TX_RING_BYTES, tp->TxDescRing, tp->tx_dma); + pci_free_consistent(pdev, RX_RING_BYTES, tp->RxDescRing, tp->rx_dma); + + tp->TxDescRing = NULL; + tp->RxDescRing = NULL; + + return 0; +} + +static netdev_tx_t sis190_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u32 len, entry, dirty_tx; + struct TxDesc *desc; + dma_addr_t mapping; + + if (unlikely(skb->len < ETH_ZLEN)) { + if (skb_padto(skb, ETH_ZLEN)) { + dev->stats.tx_dropped++; + goto out; + } + len = ETH_ZLEN; + } else { + len = skb->len; + } + + entry = tp->cur_tx % NUM_TX_DESC; + desc = tp->TxDescRing + entry; + + if (unlikely(le32_to_cpu(desc->status) & OWNbit)) { + netif_stop_queue(dev); + netif_err(tp, tx_err, dev, + "BUG! Tx Ring full when queue awake!\n"); + return NETDEV_TX_BUSY; + } + + mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(tp->pci_dev, mapping)) { + netif_err(tp, tx_err, dev, + "PCI mapping failed, dropping packet"); + return NETDEV_TX_BUSY; + } + + tp->Tx_skbuff[entry] = skb; + + desc->PSize = cpu_to_le32(len); + desc->addr = cpu_to_le32(mapping); + + desc->size = cpu_to_le32(len); + if (entry == (NUM_TX_DESC - 1)) + desc->size |= cpu_to_le32(RingEnd); + + wmb(); + + desc->status = cpu_to_le32(OWNbit | INTbit | DEFbit | CRCbit | PADbit); + if (tp->negotiated_lpa & (LPA_1000HALF | LPA_100HALF | LPA_10HALF)) { + /* Half Duplex */ + desc->status |= cpu_to_le32(COLEN | CRSEN | BKFEN); + if (tp->negotiated_lpa & (LPA_1000HALF | LPA_1000FULL)) + desc->status |= cpu_to_le32(EXTEN | BSTEN); /* gigabit HD */ + } + + tp->cur_tx++; + + smp_wmb(); + + SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb); + + dirty_tx = tp->dirty_tx; + if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) { + netif_stop_queue(dev); + smp_rmb(); + if (dirty_tx != tp->dirty_tx) + netif_wake_queue(dev); + } +out: + return NETDEV_TX_OK; +} + +static void sis190_free_phy(struct list_head *first_phy) +{ + struct sis190_phy *cur, *next; + + list_for_each_entry_safe(cur, next, first_phy, list) { + kfree(cur); + } +} + +/** + * sis190_default_phy - Select default PHY for sis190 mac. + * @dev: the net device to probe for + * + * Select first detected PHY with link as default. + * If no one is link on, select PHY whose types is HOME as default. + * If HOME doesn't exist, select LAN. + */ +static u16 sis190_default_phy(struct net_device *dev) +{ + struct sis190_phy *phy, *phy_home, *phy_default, *phy_lan; + struct sis190_private *tp = netdev_priv(dev); + struct mii_if_info *mii_if = &tp->mii_if; + void __iomem *ioaddr = tp->mmio_addr; + u16 status; + + phy_home = phy_default = phy_lan = NULL; + + list_for_each_entry(phy, &tp->first_phy, list) { + status = mdio_read_latched(ioaddr, phy->phy_id, MII_BMSR); + + // Link ON & Not select default PHY & not ghost PHY. + if ((status & BMSR_LSTATUS) && + !phy_default && + (phy->type != UNKNOWN)) { + phy_default = phy; + } else { + status = mdio_read(ioaddr, phy->phy_id, MII_BMCR); + mdio_write(ioaddr, phy->phy_id, MII_BMCR, + status | BMCR_ANENABLE | BMCR_ISOLATE); + if (phy->type == HOME) + phy_home = phy; + else if (phy->type == LAN) + phy_lan = phy; + } + } + + if (!phy_default) { + if (phy_home) + phy_default = phy_home; + else if (phy_lan) + phy_default = phy_lan; + else + phy_default = list_first_entry(&tp->first_phy, + struct sis190_phy, list); + } + + if (mii_if->phy_id != phy_default->phy_id) { + mii_if->phy_id = phy_default->phy_id; + if (netif_msg_probe(tp)) + pr_info("%s: Using transceiver at address %d as default\n", + pci_name(tp->pci_dev), mii_if->phy_id); + } + + status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR); + status &= (~BMCR_ISOLATE); + + mdio_write(ioaddr, mii_if->phy_id, MII_BMCR, status); + status = mdio_read_latched(ioaddr, mii_if->phy_id, MII_BMSR); + + return status; +} + +static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp, + struct sis190_phy *phy, unsigned int phy_id, + u16 mii_status) +{ + void __iomem *ioaddr = tp->mmio_addr; + struct mii_chip_info *p; + + INIT_LIST_HEAD(&phy->list); + phy->status = mii_status; + phy->phy_id = phy_id; + + phy->id[0] = mdio_read(ioaddr, phy_id, MII_PHYSID1); + phy->id[1] = mdio_read(ioaddr, phy_id, MII_PHYSID2); + + for (p = mii_chip_table; p->type; p++) { + if ((p->id[0] == phy->id[0]) && + (p->id[1] == (phy->id[1] & 0xfff0))) { + break; + } + } + + if (p->id[1]) { + phy->type = (p->type == MIX) ? + ((mii_status & (BMSR_100FULL | BMSR_100HALF)) ? + LAN : HOME) : p->type; + tp->features |= p->feature; + if (netif_msg_probe(tp)) + pr_info("%s: %s transceiver at address %d\n", + pci_name(tp->pci_dev), p->name, phy_id); + } else { + phy->type = UNKNOWN; + if (netif_msg_probe(tp)) + pr_info("%s: unknown PHY 0x%x:0x%x transceiver at address %d\n", + pci_name(tp->pci_dev), + phy->id[0], (phy->id[1] & 0xfff0), phy_id); + } +} + +static void sis190_mii_probe_88e1111_fixup(struct sis190_private *tp) +{ + if (tp->features & F_PHY_88E1111) { + void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; + u16 reg[2][2] = { + { 0x808b, 0x0ce1 }, + { 0x808f, 0x0c60 } + }, *p; + + p = (tp->features & F_HAS_RGMII) ? reg[0] : reg[1]; + + mdio_write(ioaddr, phy_id, 0x1b, p[0]); + udelay(200); + mdio_write(ioaddr, phy_id, 0x14, p[1]); + udelay(200); + } +} + +/** + * sis190_mii_probe - Probe MII PHY for sis190 + * @dev: the net device to probe for + * + * Search for total of 32 possible mii phy addresses. + * Identify and set current phy if found one, + * return error if it failed to found. + */ +static int __devinit sis190_mii_probe(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct mii_if_info *mii_if = &tp->mii_if; + void __iomem *ioaddr = tp->mmio_addr; + int phy_id; + int rc = 0; + + INIT_LIST_HEAD(&tp->first_phy); + + for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { + struct sis190_phy *phy; + u16 status; + + status = mdio_read_latched(ioaddr, phy_id, MII_BMSR); + + // Try next mii if the current one is not accessible. + if (status == 0xffff || status == 0x0000) + continue; + + phy = kmalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) { + sis190_free_phy(&tp->first_phy); + rc = -ENOMEM; + goto out; + } + + sis190_init_phy(dev, tp, phy, phy_id, status); + + list_add(&tp->first_phy, &phy->list); + } + + if (list_empty(&tp->first_phy)) { + if (netif_msg_probe(tp)) + pr_info("%s: No MII transceivers found!\n", + pci_name(tp->pci_dev)); + rc = -EIO; + goto out; + } + + /* Select default PHY for mac */ + sis190_default_phy(dev); + + sis190_mii_probe_88e1111_fixup(tp); + + mii_if->dev = dev; + mii_if->mdio_read = __mdio_read; + mii_if->mdio_write = __mdio_write; + mii_if->phy_id_mask = PHY_ID_ANY; + mii_if->reg_num_mask = MII_REG_ANY; +out: + return rc; +} + +static void sis190_mii_remove(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + sis190_free_phy(&tp->first_phy); +} + +static void sis190_release_board(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct sis190_private *tp = netdev_priv(dev); + + iounmap(tp->mmio_addr); + pci_release_regions(pdev); + pci_disable_device(pdev); + free_netdev(dev); +} + +static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) +{ + struct sis190_private *tp; + struct net_device *dev; + void __iomem *ioaddr; + int rc; + + dev = alloc_etherdev(sizeof(*tp)); + if (!dev) { + if (netif_msg_drv(&debug)) + pr_err("unable to alloc new ethernet\n"); + rc = -ENOMEM; + goto err_out_0; + } + + SET_NETDEV_DEV(dev, &pdev->dev); + + tp = netdev_priv(dev); + tp->dev = dev; + tp->msg_enable = netif_msg_init(debug.msg_enable, SIS190_MSG_DEFAULT); + + rc = pci_enable_device(pdev); + if (rc < 0) { + if (netif_msg_probe(tp)) + pr_err("%s: enable failure\n", pci_name(pdev)); + goto err_free_dev_1; + } + + rc = -ENODEV; + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + if (netif_msg_probe(tp)) + pr_err("%s: region #0 is no MMIO resource\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) { + if (netif_msg_probe(tp)) + pr_err("%s: invalid PCI region size(s)\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc < 0) { + if (netif_msg_probe(tp)) + pr_err("%s: could not request regions\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + + rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (rc < 0) { + if (netif_msg_probe(tp)) + pr_err("%s: DMA configuration failed\n", + pci_name(pdev)); + goto err_free_res_3; + } + + pci_set_master(pdev); + + ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE); + if (!ioaddr) { + if (netif_msg_probe(tp)) + pr_err("%s: cannot remap MMIO, aborting\n", + pci_name(pdev)); + rc = -EIO; + goto err_free_res_3; + } + + tp->pci_dev = pdev; + tp->mmio_addr = ioaddr; + tp->link_status = LNK_OFF; + + sis190_irq_mask_and_ack(ioaddr); + + sis190_soft_reset(ioaddr); +out: + return dev; + +err_free_res_3: + pci_release_regions(pdev); +err_pci_disable_2: + pci_disable_device(pdev); +err_free_dev_1: + free_netdev(dev); +err_out_0: + dev = ERR_PTR(rc); + goto out; +} + +static void sis190_tx_timeout(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u8 tmp8; + + /* Disable Tx, if not already */ + tmp8 = SIS_R8(TxControl); + if (tmp8 & CmdTxEnb) + SIS_W8(TxControl, tmp8 & ~CmdTxEnb); + + netif_info(tp, tx_err, dev, "Transmit timeout, status %08x %08x\n", + SIS_R32(TxControl), SIS_R32(TxSts)); + + /* Disable interrupts by clearing the interrupt mask. */ + SIS_W32(IntrMask, 0x0000); + + /* Stop a shared interrupt from scavenging while we are. */ + spin_lock_irq(&tp->lock); + sis190_tx_clear(tp); + spin_unlock_irq(&tp->lock); + + /* ...and finally, reset everything. */ + sis190_hw_start(dev); + + netif_wake_queue(dev); +} + +static void sis190_set_rgmii(struct sis190_private *tp, u8 reg) +{ + tp->features |= (reg & 0x80) ? F_HAS_RGMII : 0; +} + +static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev, + struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 sig; + int i; + + if (netif_msg_probe(tp)) + pr_info("%s: Read MAC address from EEPROM\n", pci_name(pdev)); + + /* Check to see if there is a sane EEPROM */ + sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature); + + if ((sig == 0xffff) || (sig == 0x0000)) { + if (netif_msg_probe(tp)) + pr_info("%s: Error EEPROM read %x\n", + pci_name(pdev), sig); + return -EIO; + } + + /* Get MAC address from EEPROM */ + for (i = 0; i < MAC_ADDR_LEN / 2; i++) { + u16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); + + ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(w); + } + + sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo)); + + return 0; +} + +/** + * sis190_get_mac_addr_from_apc - Get MAC address for SiS96x model + * @pdev: PCI device + * @dev: network device to get address for + * + * SiS96x model, use APC CMOS RAM to store MAC address. + * APC CMOS RAM is accessed through ISA bridge. + * MAC address is read into @net_dev->dev_addr. + */ +static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev, + struct net_device *dev) +{ + static const u16 __devinitdata ids[] = { 0x0965, 0x0966, 0x0968 }; + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *isa_bridge; + u8 reg, tmp8; + unsigned int i; + + if (netif_msg_probe(tp)) + pr_info("%s: Read MAC address from APC\n", pci_name(pdev)); + + for (i = 0; i < ARRAY_SIZE(ids); i++) { + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, ids[i], NULL); + if (isa_bridge) + break; + } + + if (!isa_bridge) { + if (netif_msg_probe(tp)) + pr_info("%s: Can not find ISA bridge\n", + pci_name(pdev)); + return -EIO; + } + + /* Enable port 78h & 79h to access APC Registers. */ + pci_read_config_byte(isa_bridge, 0x48, &tmp8); + reg = (tmp8 & ~0x02); + pci_write_config_byte(isa_bridge, 0x48, reg); + udelay(50); + pci_read_config_byte(isa_bridge, 0x48, ®); + + for (i = 0; i < MAC_ADDR_LEN; i++) { + outb(0x9 + i, 0x78); + dev->dev_addr[i] = inb(0x79); + } + + outb(0x12, 0x78); + reg = inb(0x79); + + sis190_set_rgmii(tp, reg); + + /* Restore the value to ISA Bridge */ + pci_write_config_byte(isa_bridge, 0x48, tmp8); + pci_dev_put(isa_bridge); + + return 0; +} + +/** + * sis190_init_rxfilter - Initialize the Rx filter + * @dev: network device to initialize + * + * Set receive filter address to our MAC address + * and enable packet filtering. + */ +static inline void sis190_init_rxfilter(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 ctl; + int i; + + ctl = SIS_R16(RxMacControl); + /* + * Disable packet filtering before setting filter. + * Note: SiS's driver writes 32 bits but RxMacControl is 16 bits + * only and followed by RxMacAddr (6 bytes). Strange. -- FR + */ + SIS_W16(RxMacControl, ctl & ~0x0f00); + + for (i = 0; i < MAC_ADDR_LEN; i++) + SIS_W8(RxMacAddr + i, dev->dev_addr[i]); + + SIS_W16(RxMacControl, ctl); + SIS_PCI_COMMIT(); +} + +static int __devinit sis190_get_mac_addr(struct pci_dev *pdev, + struct net_device *dev) +{ + int rc; + + rc = sis190_get_mac_addr_from_eeprom(pdev, dev); + if (rc < 0) { + u8 reg; + + pci_read_config_byte(pdev, 0x73, ®); + + if (reg & 0x00000001) + rc = sis190_get_mac_addr_from_apc(pdev, dev); + } + return rc; +} + +static void sis190_set_speed_auto(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; + int val; + + netif_info(tp, link, dev, "Enabling Auto-negotiation\n"); + + val = mdio_read(ioaddr, phy_id, MII_ADVERTISE); + + // Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0 + // unchanged. + mdio_write(ioaddr, phy_id, MII_ADVERTISE, (val & ADVERTISE_SLCT) | + ADVERTISE_100FULL | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_10HALF); + + // Enable 1000 Full Mode. + mdio_write(ioaddr, phy_id, MII_CTRL1000, ADVERTISE_1000FULL); + + // Enable auto-negotiation and restart auto-negotiation. + mdio_write(ioaddr, phy_id, MII_BMCR, + BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET); +} + +static int sis190_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_ethtool_gset(&tp->mii_if, cmd); +} + +static int sis190_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_ethtool_sset(&tp->mii_if, cmd); +} + +static void sis190_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct sis190_private *tp = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(tp->pci_dev)); +} + +static int sis190_get_regs_len(struct net_device *dev) +{ + return SIS190_REGS_SIZE; +} + +static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + struct sis190_private *tp = netdev_priv(dev); + unsigned long flags; + + if (regs->len > SIS190_REGS_SIZE) + regs->len = SIS190_REGS_SIZE; + + spin_lock_irqsave(&tp->lock, flags); + memcpy_fromio(p, tp->mmio_addr, regs->len); + spin_unlock_irqrestore(&tp->lock, flags); +} + +static int sis190_nway_reset(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_nway_restart(&tp->mii_if); +} + +static u32 sis190_get_msglevel(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return tp->msg_enable; +} + +static void sis190_set_msglevel(struct net_device *dev, u32 value) +{ + struct sis190_private *tp = netdev_priv(dev); + + tp->msg_enable = value; +} + +static const struct ethtool_ops sis190_ethtool_ops = { + .get_settings = sis190_get_settings, + .set_settings = sis190_set_settings, + .get_drvinfo = sis190_get_drvinfo, + .get_regs_len = sis190_get_regs_len, + .get_regs = sis190_get_regs, + .get_link = ethtool_op_get_link, + .get_msglevel = sis190_get_msglevel, + .set_msglevel = sis190_set_msglevel, + .nway_reset = sis190_nway_reset, +}; + +static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return !netif_running(dev) ? -EINVAL : + generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL); +} + +static int sis190_mac_addr(struct net_device *dev, void *p) +{ + int rc; + + rc = eth_mac_addr(dev, p); + if (!rc) + sis190_init_rxfilter(dev); + return rc; +} + +static const struct net_device_ops sis190_netdev_ops = { + .ndo_open = sis190_open, + .ndo_stop = sis190_close, + .ndo_do_ioctl = sis190_ioctl, + .ndo_start_xmit = sis190_start_xmit, + .ndo_tx_timeout = sis190_tx_timeout, + .ndo_set_multicast_list = sis190_set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = sis190_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = sis190_netpoll, +#endif +}; + +static int __devinit sis190_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version = 0; + struct sis190_private *tp; + struct net_device *dev; + void __iomem *ioaddr; + int rc; + + if (!printed_version) { + if (netif_msg_drv(&debug)) + pr_info(SIS190_DRIVER_NAME " loaded\n"); + printed_version = 1; + } + + dev = sis190_init_board(pdev); + if (IS_ERR(dev)) { + rc = PTR_ERR(dev); + goto out; + } + + pci_set_drvdata(pdev, dev); + + tp = netdev_priv(dev); + ioaddr = tp->mmio_addr; + + rc = sis190_get_mac_addr(pdev, dev); + if (rc < 0) + goto err_release_board; + + sis190_init_rxfilter(dev); + + INIT_WORK(&tp->phy_task, sis190_phy_task); + + dev->netdev_ops = &sis190_netdev_ops; + + SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops); + dev->irq = pdev->irq; + dev->base_addr = (unsigned long) 0xdead; + dev->watchdog_timeo = SIS190_TX_TIMEOUT; + + spin_lock_init(&tp->lock); + + rc = sis190_mii_probe(dev); + if (rc < 0) + goto err_release_board; + + rc = register_netdev(dev); + if (rc < 0) + goto err_remove_mii; + + if (netif_msg_probe(tp)) { + netdev_info(dev, "%s: %s at %p (IRQ: %d), %pM\n", + pci_name(pdev), + sis_chip_info[ent->driver_data].name, + ioaddr, dev->irq, dev->dev_addr); + netdev_info(dev, "%s mode.\n", + (tp->features & F_HAS_RGMII) ? "RGMII" : "GMII"); + } + + netif_carrier_off(dev); + + sis190_set_speed_auto(dev); +out: + return rc; + +err_remove_mii: + sis190_mii_remove(dev); +err_release_board: + sis190_release_board(pdev); + goto out; +} + +static void __devexit sis190_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct sis190_private *tp = netdev_priv(dev); + + sis190_mii_remove(dev); + cancel_work_sync(&tp->phy_task); + unregister_netdev(dev); + sis190_release_board(pdev); + pci_set_drvdata(pdev, NULL); +} + +static struct pci_driver sis190_pci_driver = { + .name = DRV_NAME, + .id_table = sis190_pci_tbl, + .probe = sis190_init_one, + .remove = __devexit_p(sis190_remove_one), +}; + +static int __init sis190_init_module(void) +{ + return pci_register_driver(&sis190_pci_driver); +} + +static void __exit sis190_cleanup_module(void) +{ + pci_unregister_driver(&sis190_pci_driver); +} + +module_init(sis190_init_module); +module_exit(sis190_cleanup_module); diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c new file mode 100644 index 000000000000..658a1928fe79 --- /dev/null +++ b/drivers/net/ethernet/sis/sis900.c @@ -0,0 +1,2494 @@ +/* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux. + Copyright 1999 Silicon Integrated System Corporation + Revision: 1.08.10 Apr. 2 2006 + + Modified from the driver which is originally written by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on this skeleton fall under the GPL and must retain + the authorship (implicit copyright) notice. + + References: + SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support, + preliminary Rev. 1.0 Jan. 14, 1998 + SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support, + preliminary Rev. 1.0 Nov. 10, 1998 + SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution, + preliminary Rev. 1.0 Jan. 18, 1998 + + Rev 1.08.10 Apr. 2 2006 Daniele Venzano add vlan (jumbo packets) support + Rev 1.08.09 Sep. 19 2005 Daniele Venzano add Wake on LAN support + Rev 1.08.08 Jan. 22 2005 Daniele Venzano use netif_msg for debugging messages + Rev 1.08.07 Nov. 2 2003 Daniele Venzano add suspend/resume support + Rev 1.08.06 Sep. 24 2002 Mufasa Yang bug fix for Tx timeout & add SiS963 support + Rev 1.08.05 Jun. 6 2002 Mufasa Yang bug fix for read_eeprom & Tx descriptor over-boundary + Rev 1.08.04 Apr. 25 2002 Mufasa Yang added SiS962 support + Rev 1.08.03 Feb. 1 2002 Matt Domsch update to use library crc32 function + Rev 1.08.02 Nov. 30 2001 Hui-Fen Hsu workaround for EDB & bug fix for dhcp problem + Rev 1.08.01 Aug. 25 2001 Hui-Fen Hsu update for 630ET & workaround for ICS1893 PHY + Rev 1.08.00 Jun. 11 2001 Hui-Fen Hsu workaround for RTL8201 PHY and some bug fix + Rev 1.07.11 Apr. 2 2001 Hui-Fen Hsu updates PCI drivers to use the new pci_set_dma_mask for kernel 2.4.3 + Rev 1.07.10 Mar. 1 2001 Hui-Fen Hsu some bug fix & 635M/B support + Rev 1.07.09 Feb. 9 2001 Dave Jones PCI enable cleanup + Rev 1.07.08 Jan. 8 2001 Lei-Chun Chang added RTL8201 PHY support + Rev 1.07.07 Nov. 29 2000 Lei-Chun Chang added kernel-doc extractable documentation and 630 workaround fix + Rev 1.07.06 Nov. 7 2000 Jeff Garzik some bug fix and cleaning + Rev 1.07.05 Nov. 6 2000 metapirat contribute media type select by ifconfig + Rev 1.07.04 Sep. 6 2000 Lei-Chun Chang added ICS1893 PHY support + Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E equalizer workaround rule + Rev 1.07.01 Aug. 08 2000 Ollie Lho minor update for SiS 630E and SiS 630E A1 + Rev 1.07 Mar. 07 2000 Ollie Lho bug fix in Rx buffer ring + Rev 1.06.04 Feb. 11 2000 Jeff Garzik softnet and init for kernel 2.4 + Rev 1.06.03 Dec. 23 1999 Ollie Lho Third release + Rev 1.06.02 Nov. 23 1999 Ollie Lho bug in mac probing fixed + Rev 1.06.01 Nov. 16 1999 Ollie Lho CRC calculation provide by Joseph Zbiciak (im14u2c@primenet.com) + Rev 1.06 Nov. 4 1999 Ollie Lho (ollie@sis.com.tw) Second release + Rev 1.05.05 Oct. 29 1999 Ollie Lho (ollie@sis.com.tw) Single buffer Tx/Rx + Chin-Shan Li (lcs@sis.com.tw) Added AMD Am79c901 HomePNA PHY support + Rev 1.05 Aug. 7 1999 Jim Huang (cmhuang@sis.com.tw) Initial release +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include /* Processor type for cache alignment. */ +#include +#include +#include /* User space memory access functions */ + +#include "sis900.h" + +#define SIS900_MODULE_NAME "sis900" +#define SIS900_DRV_VERSION "v1.08.10 Apr. 2 2006" + +static const char version[] __devinitconst = + KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n"; + +static int max_interrupt_work = 40; +static int multicast_filter_limit = 128; + +static int sis900_debug = -1; /* Use SIS900_DEF_MSG as value */ + +#define SIS900_DEF_MSG \ + (NETIF_MSG_DRV | \ + NETIF_MSG_LINK | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR) + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (4*HZ) + +enum { + SIS_900 = 0, + SIS_7016 +}; +static const char * card_names[] = { + "SiS 900 PCI Fast Ethernet", + "SiS 7016 PCI Fast Ethernet" +}; +static DEFINE_PCI_DEVICE_TABLE(sis900_pci_tbl) = { + {PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_900, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_900}, + {PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7016, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_7016}, + {0,} +}; +MODULE_DEVICE_TABLE (pci, sis900_pci_tbl); + +static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex); + +static const struct mii_chip_info { + const char * name; + u16 phy_id0; + u16 phy_id1; + u8 phy_types; +#define HOME 0x0001 +#define LAN 0x0002 +#define MIX 0x0003 +#define UNKNOWN 0x0 +} mii_chip_table[] = { + { "SiS 900 Internal MII PHY", 0x001d, 0x8000, LAN }, + { "SiS 7014 Physical Layer Solution", 0x0016, 0xf830, LAN }, + { "SiS 900 on Foxconn 661 7MI", 0x0143, 0xBC70, LAN }, + { "Altimata AC101LF PHY", 0x0022, 0x5520, LAN }, + { "ADM 7001 LAN PHY", 0x002e, 0xcc60, LAN }, + { "AMD 79C901 10BASE-T PHY", 0x0000, 0x6B70, LAN }, + { "AMD 79C901 HomePNA PHY", 0x0000, 0x6B90, HOME}, + { "ICS LAN PHY", 0x0015, 0xF440, LAN }, + { "ICS LAN PHY", 0x0143, 0xBC70, LAN }, + { "NS 83851 PHY", 0x2000, 0x5C20, MIX }, + { "NS 83847 PHY", 0x2000, 0x5C30, MIX }, + { "Realtek RTL8201 PHY", 0x0000, 0x8200, LAN }, + { "VIA 6103 PHY", 0x0101, 0x8f20, LAN }, + {NULL,}, +}; + +struct mii_phy { + struct mii_phy * next; + int phy_addr; + u16 phy_id0; + u16 phy_id1; + u16 status; + u8 phy_types; +}; + +typedef struct _BufferDesc { + u32 link; + u32 cmdsts; + u32 bufptr; +} BufferDesc; + +struct sis900_private { + struct pci_dev * pci_dev; + + spinlock_t lock; + + struct mii_phy * mii; + struct mii_phy * first_mii; /* record the first mii structure */ + unsigned int cur_phy; + struct mii_if_info mii_info; + + struct timer_list timer; /* Link status detection timer. */ + u8 autong_complete; /* 1: auto-negotiate complete */ + + u32 msg_enable; + + unsigned int cur_rx, dirty_rx; /* producer/comsumer pointers for Tx/Rx ring */ + unsigned int cur_tx, dirty_tx; + + /* The saved address of a sent/receive-in-place packet buffer */ + struct sk_buff *tx_skbuff[NUM_TX_DESC]; + struct sk_buff *rx_skbuff[NUM_RX_DESC]; + BufferDesc *tx_ring; + BufferDesc *rx_ring; + + dma_addr_t tx_ring_dma; + dma_addr_t rx_ring_dma; + + unsigned int tx_full; /* The Tx queue is full. */ + u8 host_bridge_rev; + u8 chipset_rev; +}; + +MODULE_AUTHOR("Jim Huang , Ollie Lho "); +MODULE_DESCRIPTION("SiS 900 PCI Fast Ethernet driver"); +MODULE_LICENSE("GPL"); + +module_param(multicast_filter_limit, int, 0444); +module_param(max_interrupt_work, int, 0444); +module_param(sis900_debug, int, 0444); +MODULE_PARM_DESC(multicast_filter_limit, "SiS 900/7016 maximum number of filtered multicast addresses"); +MODULE_PARM_DESC(max_interrupt_work, "SiS 900/7016 maximum events handled per interrupt"); +MODULE_PARM_DESC(sis900_debug, "SiS 900/7016 bitmapped debugging message level"); + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void sis900_poll(struct net_device *dev); +#endif +static int sis900_open(struct net_device *net_dev); +static int sis900_mii_probe (struct net_device * net_dev); +static void sis900_init_rxfilter (struct net_device * net_dev); +static u16 read_eeprom(long ioaddr, int location); +static int mdio_read(struct net_device *net_dev, int phy_id, int location); +static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val); +static void sis900_timer(unsigned long data); +static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy); +static void sis900_tx_timeout(struct net_device *net_dev); +static void sis900_init_tx_ring(struct net_device *net_dev); +static void sis900_init_rx_ring(struct net_device *net_dev); +static netdev_tx_t sis900_start_xmit(struct sk_buff *skb, + struct net_device *net_dev); +static int sis900_rx(struct net_device *net_dev); +static void sis900_finish_xmit (struct net_device *net_dev); +static irqreturn_t sis900_interrupt(int irq, void *dev_instance); +static int sis900_close(struct net_device *net_dev); +static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd); +static u16 sis900_mcast_bitnr(u8 *addr, u8 revision); +static void set_rx_mode(struct net_device *net_dev); +static void sis900_reset(struct net_device *net_dev); +static void sis630_set_eq(struct net_device *net_dev, u8 revision); +static int sis900_set_config(struct net_device *dev, struct ifmap *map); +static u16 sis900_default_phy(struct net_device * net_dev); +static void sis900_set_capability( struct net_device *net_dev ,struct mii_phy *phy); +static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr); +static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr); +static void sis900_set_mode (long ioaddr, int speed, int duplex); +static const struct ethtool_ops sis900_ethtool_ops; + +/** + * sis900_get_mac_addr - Get MAC address for stand alone SiS900 model + * @pci_dev: the sis900 pci device + * @net_dev: the net device to get address for + * + * Older SiS900 and friends, use EEPROM to store MAC address. + * MAC address is read from read_eeprom() into @net_dev->dev_addr and + * @net_dev->perm_addr. + */ + +static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev) +{ + long ioaddr = pci_resource_start(pci_dev, 0); + u16 signature; + int i; + + /* check to see if we have sane EEPROM */ + signature = (u16) read_eeprom(ioaddr, EEPROMSignature); + if (signature == 0xffff || signature == 0x0000) { + printk (KERN_WARNING "%s: Error EERPOM read %x\n", + pci_name(pci_dev), signature); + return 0; + } + + /* get MAC address from EEPROM */ + for (i = 0; i < 3; i++) + ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr); + + /* Store MAC Address in perm_addr */ + memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); + + return 1; +} + +/** + * sis630e_get_mac_addr - Get MAC address for SiS630E model + * @pci_dev: the sis900 pci device + * @net_dev: the net device to get address for + * + * SiS630E model, use APC CMOS RAM to store MAC address. + * APC CMOS RAM is accessed through ISA bridge. + * MAC address is read into @net_dev->dev_addr and + * @net_dev->perm_addr. + */ + +static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, + struct net_device *net_dev) +{ + struct pci_dev *isa_bridge = NULL; + u8 reg; + int i; + + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0008, isa_bridge); + if (!isa_bridge) + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0018, isa_bridge); + if (!isa_bridge) { + printk(KERN_WARNING "%s: Can not find ISA bridge\n", + pci_name(pci_dev)); + return 0; + } + pci_read_config_byte(isa_bridge, 0x48, ®); + pci_write_config_byte(isa_bridge, 0x48, reg | 0x40); + + for (i = 0; i < 6; i++) { + outb(0x09 + i, 0x70); + ((u8 *)(net_dev->dev_addr))[i] = inb(0x71); + } + + /* Store MAC Address in perm_addr */ + memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); + + pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40); + pci_dev_put(isa_bridge); + + return 1; +} + + +/** + * sis635_get_mac_addr - Get MAC address for SIS635 model + * @pci_dev: the sis900 pci device + * @net_dev: the net device to get address for + * + * SiS635 model, set MAC Reload Bit to load Mac address from APC + * to rfdr. rfdr is accessed through rfcr. MAC address is read into + * @net_dev->dev_addr and @net_dev->perm_addr. + */ + +static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, + struct net_device *net_dev) +{ + long ioaddr = net_dev->base_addr; + u32 rfcrSave; + u32 i; + + rfcrSave = inl(rfcr + ioaddr); + + outl(rfcrSave | RELOAD, ioaddr + cr); + outl(0, ioaddr + cr); + + /* disable packet filtering before setting filter */ + outl(rfcrSave & ~RFEN, rfcr + ioaddr); + + /* load MAC addr to filter data register */ + for (i = 0 ; i < 3 ; i++) { + outl((i << RFADDR_shift), ioaddr + rfcr); + *( ((u16 *)net_dev->dev_addr) + i) = inw(ioaddr + rfdr); + } + + /* Store MAC Address in perm_addr */ + memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); + + /* enable packet filtering */ + outl(rfcrSave | RFEN, rfcr + ioaddr); + + return 1; +} + +/** + * sis96x_get_mac_addr - Get MAC address for SiS962 or SiS963 model + * @pci_dev: the sis900 pci device + * @net_dev: the net device to get address for + * + * SiS962 or SiS963 model, use EEPROM to store MAC address. And EEPROM + * is shared by + * LAN and 1394. When access EEPROM, send EEREQ signal to hardware first + * and wait for EEGNT. If EEGNT is ON, EEPROM is permitted to be access + * by LAN, otherwise is not. After MAC address is read from EEPROM, send + * EEDONE signal to refuse EEPROM access by LAN. + * The EEPROM map of SiS962 or SiS963 is different to SiS900. + * The signature field in SiS962 or SiS963 spec is meaningless. + * MAC address is read into @net_dev->dev_addr and @net_dev->perm_addr. + */ + +static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev, + struct net_device *net_dev) +{ + long ioaddr = net_dev->base_addr; + long ee_addr = ioaddr + mear; + u32 waittime = 0; + int i; + + outl(EEREQ, ee_addr); + while(waittime < 2000) { + if(inl(ee_addr) & EEGNT) { + + /* get MAC address from EEPROM */ + for (i = 0; i < 3; i++) + ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr); + + /* Store MAC Address in perm_addr */ + memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); + + outl(EEDONE, ee_addr); + return 1; + } else { + udelay(1); + waittime ++; + } + } + outl(EEDONE, ee_addr); + return 0; +} + +static const struct net_device_ops sis900_netdev_ops = { + .ndo_open = sis900_open, + .ndo_stop = sis900_close, + .ndo_start_xmit = sis900_start_xmit, + .ndo_set_config = sis900_set_config, + .ndo_set_multicast_list = set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_do_ioctl = mii_ioctl, + .ndo_tx_timeout = sis900_tx_timeout, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = sis900_poll, +#endif +}; + +/** + * sis900_probe - Probe for sis900 device + * @pci_dev: the sis900 pci device + * @pci_id: the pci device ID + * + * Check and probe sis900 net device for @pci_dev. + * Get mac address according to the chip revision, + * and assign SiS900-specific entries in the device structure. + * ie: sis900_open(), sis900_start_xmit(), sis900_close(), etc. + */ + +static int __devinit sis900_probe(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct sis900_private *sis_priv; + struct net_device *net_dev; + struct pci_dev *dev; + dma_addr_t ring_dma; + void *ring_space; + long ioaddr; + int i, ret; + const char *card_name = card_names[pci_id->driver_data]; + const char *dev_name = pci_name(pci_dev); + +/* when built into the kernel, we only print version if device is found */ +#ifndef MODULE + static int printed_version; + if (!printed_version++) + printk(version); +#endif + + /* setup various bits in PCI command register */ + ret = pci_enable_device(pci_dev); + if(ret) return ret; + + i = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32)); + if(i){ + printk(KERN_ERR "sis900.c: architecture does not support " + "32bit PCI busmaster DMA\n"); + return i; + } + + pci_set_master(pci_dev); + + net_dev = alloc_etherdev(sizeof(struct sis900_private)); + if (!net_dev) + return -ENOMEM; + SET_NETDEV_DEV(net_dev, &pci_dev->dev); + + /* We do a request_region() to register /proc/ioports info. */ + ioaddr = pci_resource_start(pci_dev, 0); + ret = pci_request_regions(pci_dev, "sis900"); + if (ret) + goto err_out; + + sis_priv = netdev_priv(net_dev); + net_dev->base_addr = ioaddr; + net_dev->irq = pci_dev->irq; + sis_priv->pci_dev = pci_dev; + spin_lock_init(&sis_priv->lock); + + pci_set_drvdata(pci_dev, net_dev); + + ring_space = pci_alloc_consistent(pci_dev, TX_TOTAL_SIZE, &ring_dma); + if (!ring_space) { + ret = -ENOMEM; + goto err_out_cleardev; + } + sis_priv->tx_ring = ring_space; + sis_priv->tx_ring_dma = ring_dma; + + ring_space = pci_alloc_consistent(pci_dev, RX_TOTAL_SIZE, &ring_dma); + if (!ring_space) { + ret = -ENOMEM; + goto err_unmap_tx; + } + sis_priv->rx_ring = ring_space; + sis_priv->rx_ring_dma = ring_dma; + + /* The SiS900-specific entries in the device structure. */ + net_dev->netdev_ops = &sis900_netdev_ops; + net_dev->watchdog_timeo = TX_TIMEOUT; + net_dev->ethtool_ops = &sis900_ethtool_ops; + + if (sis900_debug > 0) + sis_priv->msg_enable = sis900_debug; + else + sis_priv->msg_enable = SIS900_DEF_MSG; + + sis_priv->mii_info.dev = net_dev; + sis_priv->mii_info.mdio_read = mdio_read; + sis_priv->mii_info.mdio_write = mdio_write; + sis_priv->mii_info.phy_id_mask = 0x1f; + sis_priv->mii_info.reg_num_mask = 0x1f; + + /* Get Mac address according to the chip revision */ + sis_priv->chipset_rev = pci_dev->revision; + if(netif_msg_probe(sis_priv)) + printk(KERN_DEBUG "%s: detected revision %2.2x, " + "trying to get MAC address...\n", + dev_name, sis_priv->chipset_rev); + + ret = 0; + if (sis_priv->chipset_rev == SIS630E_900_REV) + ret = sis630e_get_mac_addr(pci_dev, net_dev); + else if ((sis_priv->chipset_rev > 0x81) && (sis_priv->chipset_rev <= 0x90) ) + ret = sis635_get_mac_addr(pci_dev, net_dev); + else if (sis_priv->chipset_rev == SIS96x_900_REV) + ret = sis96x_get_mac_addr(pci_dev, net_dev); + else + ret = sis900_get_mac_addr(pci_dev, net_dev); + + if (!ret || !is_valid_ether_addr(net_dev->dev_addr)) { + random_ether_addr(net_dev->dev_addr); + printk(KERN_WARNING "%s: Unreadable or invalid MAC address," + "using random generated one\n", dev_name); + } + + /* 630ET : set the mii access mode as software-mode */ + if (sis_priv->chipset_rev == SIS630ET_900_REV) + outl(ACCESSMODE | inl(ioaddr + cr), ioaddr + cr); + + /* probe for mii transceiver */ + if (sis900_mii_probe(net_dev) == 0) { + printk(KERN_WARNING "%s: Error probing MII device.\n", + dev_name); + ret = -ENODEV; + goto err_unmap_rx; + } + + /* save our host bridge revision */ + dev = pci_get_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_630, NULL); + if (dev) { + sis_priv->host_bridge_rev = dev->revision; + pci_dev_put(dev); + } + + ret = register_netdev(net_dev); + if (ret) + goto err_unmap_rx; + + /* print some information about our NIC */ + printk(KERN_INFO "%s: %s at %#lx, IRQ %d, %pM\n", + net_dev->name, card_name, ioaddr, net_dev->irq, + net_dev->dev_addr); + + /* Detect Wake on Lan support */ + ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27; + if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0) + printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name); + + return 0; + + err_unmap_rx: + pci_free_consistent(pci_dev, RX_TOTAL_SIZE, sis_priv->rx_ring, + sis_priv->rx_ring_dma); + err_unmap_tx: + pci_free_consistent(pci_dev, TX_TOTAL_SIZE, sis_priv->tx_ring, + sis_priv->tx_ring_dma); + err_out_cleardev: + pci_set_drvdata(pci_dev, NULL); + pci_release_regions(pci_dev); + err_out: + free_netdev(net_dev); + return ret; +} + +/** + * sis900_mii_probe - Probe MII PHY for sis900 + * @net_dev: the net device to probe for + * + * Search for total of 32 possible mii phy addresses. + * Identify and set current phy if found one, + * return error if it failed to found. + */ + +static int __devinit sis900_mii_probe(struct net_device * net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + const char *dev_name = pci_name(sis_priv->pci_dev); + u16 poll_bit = MII_STAT_LINK, status = 0; + unsigned long timeout = jiffies + 5 * HZ; + int phy_addr; + + sis_priv->mii = NULL; + + /* search for total of 32 possible mii phy addresses */ + for (phy_addr = 0; phy_addr < 32; phy_addr++) { + struct mii_phy * mii_phy = NULL; + u16 mii_status; + int i; + + mii_phy = NULL; + for(i = 0; i < 2; i++) + mii_status = mdio_read(net_dev, phy_addr, MII_STATUS); + + if (mii_status == 0xffff || mii_status == 0x0000) { + if (netif_msg_probe(sis_priv)) + printk(KERN_DEBUG "%s: MII at address %d" + " not accessible\n", + dev_name, phy_addr); + continue; + } + + if ((mii_phy = kmalloc(sizeof(struct mii_phy), GFP_KERNEL)) == NULL) { + printk(KERN_WARNING "Cannot allocate mem for struct mii_phy\n"); + mii_phy = sis_priv->first_mii; + while (mii_phy) { + struct mii_phy *phy; + phy = mii_phy; + mii_phy = mii_phy->next; + kfree(phy); + } + return 0; + } + + mii_phy->phy_id0 = mdio_read(net_dev, phy_addr, MII_PHY_ID0); + mii_phy->phy_id1 = mdio_read(net_dev, phy_addr, MII_PHY_ID1); + mii_phy->phy_addr = phy_addr; + mii_phy->status = mii_status; + mii_phy->next = sis_priv->mii; + sis_priv->mii = mii_phy; + sis_priv->first_mii = mii_phy; + + for (i = 0; mii_chip_table[i].phy_id1; i++) + if ((mii_phy->phy_id0 == mii_chip_table[i].phy_id0 ) && + ((mii_phy->phy_id1 & 0xFFF0) == mii_chip_table[i].phy_id1)){ + mii_phy->phy_types = mii_chip_table[i].phy_types; + if (mii_chip_table[i].phy_types == MIX) + mii_phy->phy_types = + (mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX)) ? LAN : HOME; + printk(KERN_INFO "%s: %s transceiver found " + "at address %d.\n", + dev_name, + mii_chip_table[i].name, + phy_addr); + break; + } + + if( !mii_chip_table[i].phy_id1 ) { + printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n", + dev_name, phy_addr); + mii_phy->phy_types = UNKNOWN; + } + } + + if (sis_priv->mii == NULL) { + printk(KERN_INFO "%s: No MII transceivers found!\n", dev_name); + return 0; + } + + /* select default PHY for mac */ + sis_priv->mii = NULL; + sis900_default_phy( net_dev ); + + /* Reset phy if default phy is internal sis900 */ + if ((sis_priv->mii->phy_id0 == 0x001D) && + ((sis_priv->mii->phy_id1&0xFFF0) == 0x8000)) + status = sis900_reset_phy(net_dev, sis_priv->cur_phy); + + /* workaround for ICS1893 PHY */ + if ((sis_priv->mii->phy_id0 == 0x0015) && + ((sis_priv->mii->phy_id1&0xFFF0) == 0xF440)) + mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200); + + if(status & MII_STAT_LINK){ + while (poll_bit) { + yield(); + + poll_bit ^= (mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS) & poll_bit); + if (time_after_eq(jiffies, timeout)) { + printk(KERN_WARNING "%s: reset phy and link down now\n", + dev_name); + return -ETIME; + } + } + } + + if (sis_priv->chipset_rev == SIS630E_900_REV) { + /* SiS 630E has some bugs on default value of PHY registers */ + mdio_write(net_dev, sis_priv->cur_phy, MII_ANADV, 0x05e1); + mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG1, 0x22); + mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG2, 0xff00); + mdio_write(net_dev, sis_priv->cur_phy, MII_MASK, 0xffc0); + //mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, 0x1000); + } + + if (sis_priv->mii->status & MII_STAT_LINK) + netif_carrier_on(net_dev); + else + netif_carrier_off(net_dev); + + return 1; +} + +/** + * sis900_default_phy - Select default PHY for sis900 mac. + * @net_dev: the net device to probe for + * + * Select first detected PHY with link as default. + * If no one is link on, select PHY whose types is HOME as default. + * If HOME doesn't exist, select LAN. + */ + +static u16 sis900_default_phy(struct net_device * net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + struct mii_phy *phy = NULL, *phy_home = NULL, + *default_phy = NULL, *phy_lan = NULL; + u16 status; + + for (phy=sis_priv->first_mii; phy; phy=phy->next) { + status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); + status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); + + /* Link ON & Not select default PHY & not ghost PHY */ + if ((status & MII_STAT_LINK) && !default_phy && + (phy->phy_types != UNKNOWN)) + default_phy = phy; + else { + status = mdio_read(net_dev, phy->phy_addr, MII_CONTROL); + mdio_write(net_dev, phy->phy_addr, MII_CONTROL, + status | MII_CNTL_AUTO | MII_CNTL_ISOLATE); + if (phy->phy_types == HOME) + phy_home = phy; + else if(phy->phy_types == LAN) + phy_lan = phy; + } + } + + if (!default_phy && phy_home) + default_phy = phy_home; + else if (!default_phy && phy_lan) + default_phy = phy_lan; + else if (!default_phy) + default_phy = sis_priv->first_mii; + + if (sis_priv->mii != default_phy) { + sis_priv->mii = default_phy; + sis_priv->cur_phy = default_phy->phy_addr; + printk(KERN_INFO "%s: Using transceiver found at address %d as default\n", + pci_name(sis_priv->pci_dev), sis_priv->cur_phy); + } + + sis_priv->mii_info.phy_id = sis_priv->cur_phy; + + status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL); + status &= (~MII_CNTL_ISOLATE); + + mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, status); + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + + return status; +} + + +/** + * sis900_set_capability - set the media capability of network adapter. + * @net_dev : the net device to probe for + * @phy : default PHY + * + * Set the media capability of network adapter according to + * mii status register. It's necessary before auto-negotiate. + */ + +static void sis900_set_capability(struct net_device *net_dev, struct mii_phy *phy) +{ + u16 cap; + u16 status; + + status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); + status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); + + cap = MII_NWAY_CSMA_CD | + ((phy->status & MII_STAT_CAN_TX_FDX)? MII_NWAY_TX_FDX:0) | + ((phy->status & MII_STAT_CAN_TX) ? MII_NWAY_TX:0) | + ((phy->status & MII_STAT_CAN_T_FDX) ? MII_NWAY_T_FDX:0)| + ((phy->status & MII_STAT_CAN_T) ? MII_NWAY_T:0); + + mdio_write(net_dev, phy->phy_addr, MII_ANADV, cap); +} + + +/* Delay between EEPROM clock transitions. */ +#define eeprom_delay() inl(ee_addr) + +/** + * read_eeprom - Read Serial EEPROM + * @ioaddr: base i/o address + * @location: the EEPROM location to read + * + * Read Serial EEPROM through EEPROM Access Register. + * Note that location is in word (16 bits) unit + */ + +static u16 __devinit read_eeprom(long ioaddr, int location) +{ + int i; + u16 retval = 0; + long ee_addr = ioaddr + mear; + u32 read_cmd = location | EEread; + + outl(0, ee_addr); + eeprom_delay(); + outl(EECS, ee_addr); + eeprom_delay(); + + /* Shift the read command (9) bits out. */ + for (i = 8; i >= 0; i--) { + u32 dataval = (read_cmd & (1 << i)) ? EEDI | EECS : EECS; + outl(dataval, ee_addr); + eeprom_delay(); + outl(dataval | EECLK, ee_addr); + eeprom_delay(); + } + outl(EECS, ee_addr); + eeprom_delay(); + + /* read the 16-bits data in */ + for (i = 16; i > 0; i--) { + outl(EECS, ee_addr); + eeprom_delay(); + outl(EECS | EECLK, ee_addr); + eeprom_delay(); + retval = (retval << 1) | ((inl(ee_addr) & EEDO) ? 1 : 0); + eeprom_delay(); + } + + /* Terminate the EEPROM access. */ + outl(0, ee_addr); + eeprom_delay(); + + return retval; +} + +/* Read and write the MII management registers using software-generated + serial MDIO protocol. Note that the command bits and data bits are + send out separately */ +#define mdio_delay() inl(mdio_addr) + +static void mdio_idle(long mdio_addr) +{ + outl(MDIO | MDDIR, mdio_addr); + mdio_delay(); + outl(MDIO | MDDIR | MDC, mdio_addr); +} + +/* Syncronize the MII management interface by shifting 32 one bits out. */ +static void mdio_reset(long mdio_addr) +{ + int i; + + for (i = 31; i >= 0; i--) { + outl(MDDIR | MDIO, mdio_addr); + mdio_delay(); + outl(MDDIR | MDIO | MDC, mdio_addr); + mdio_delay(); + } +} + +/** + * mdio_read - read MII PHY register + * @net_dev: the net device to read + * @phy_id: the phy address to read + * @location: the phy regiester id to read + * + * Read MII registers through MDIO and MDC + * using MDIO management frame structure and protocol(defined by ISO/IEC). + * Please see SiS7014 or ICS spec + */ + +static int mdio_read(struct net_device *net_dev, int phy_id, int location) +{ + long mdio_addr = net_dev->base_addr + mear; + int mii_cmd = MIIread|(phy_id<= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR; + outl(dataval, mdio_addr); + mdio_delay(); + outl(dataval | MDC, mdio_addr); + mdio_delay(); + } + + /* Read the 16 data bits. */ + for (i = 16; i > 0; i--) { + outl(0, mdio_addr); + mdio_delay(); + retval = (retval << 1) | ((inl(mdio_addr) & MDIO) ? 1 : 0); + outl(MDC, mdio_addr); + mdio_delay(); + } + outl(0x00, mdio_addr); + + return retval; +} + +/** + * mdio_write - write MII PHY register + * @net_dev: the net device to write + * @phy_id: the phy address to write + * @location: the phy regiester id to write + * @value: the register value to write with + * + * Write MII registers with @value through MDIO and MDC + * using MDIO management frame structure and protocol(defined by ISO/IEC) + * please see SiS7014 or ICS spec + */ + +static void mdio_write(struct net_device *net_dev, int phy_id, int location, + int value) +{ + long mdio_addr = net_dev->base_addr + mear; + int mii_cmd = MIIwrite|(phy_id<= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR; + outb(dataval, mdio_addr); + mdio_delay(); + outb(dataval | MDC, mdio_addr); + mdio_delay(); + } + mdio_delay(); + + /* Shift the value bits out. */ + for (i = 15; i >= 0; i--) { + int dataval = (value & (1 << i)) ? MDDIR | MDIO : MDDIR; + outl(dataval, mdio_addr); + mdio_delay(); + outl(dataval | MDC, mdio_addr); + mdio_delay(); + } + mdio_delay(); + + /* Clear out extra bits. */ + for (i = 2; i > 0; i--) { + outb(0, mdio_addr); + mdio_delay(); + outb(MDC, mdio_addr); + mdio_delay(); + } + outl(0x00, mdio_addr); +} + + +/** + * sis900_reset_phy - reset sis900 mii phy. + * @net_dev: the net device to write + * @phy_addr: default phy address + * + * Some specific phy can't work properly without reset. + * This function will be called during initialization and + * link status change from ON to DOWN. + */ + +static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr) +{ + int i; + u16 status; + + for (i = 0; i < 2; i++) + status = mdio_read(net_dev, phy_addr, MII_STATUS); + + mdio_write( net_dev, phy_addr, MII_CONTROL, MII_CNTL_RESET ); + + return status; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. +*/ +static void sis900_poll(struct net_device *dev) +{ + disable_irq(dev->irq); + sis900_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/** + * sis900_open - open sis900 device + * @net_dev: the net device to open + * + * Do some initialization and start net interface. + * enable interrupts and set sis900 timer. + */ + +static int +sis900_open(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + long ioaddr = net_dev->base_addr; + int ret; + + /* Soft reset the chip. */ + sis900_reset(net_dev); + + /* Equalizer workaround Rule */ + sis630_set_eq(net_dev, sis_priv->chipset_rev); + + ret = request_irq(net_dev->irq, sis900_interrupt, IRQF_SHARED, + net_dev->name, net_dev); + if (ret) + return ret; + + sis900_init_rxfilter(net_dev); + + sis900_init_tx_ring(net_dev); + sis900_init_rx_ring(net_dev); + + set_rx_mode(net_dev); + + netif_start_queue(net_dev); + + /* Workaround for EDB */ + sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); + + /* Enable all known interrupts by setting the interrupt mask. */ + outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr); + outl(RxENA | inl(ioaddr + cr), ioaddr + cr); + outl(IE, ioaddr + ier); + + sis900_check_mode(net_dev, sis_priv->mii); + + /* Set the timer to switch to check for link beat and perhaps switch + to an alternate media type. */ + init_timer(&sis_priv->timer); + sis_priv->timer.expires = jiffies + HZ; + sis_priv->timer.data = (unsigned long)net_dev; + sis_priv->timer.function = sis900_timer; + add_timer(&sis_priv->timer); + + return 0; +} + +/** + * sis900_init_rxfilter - Initialize the Rx filter + * @net_dev: the net device to initialize for + * + * Set receive filter address to our MAC address + * and enable packet filtering. + */ + +static void +sis900_init_rxfilter (struct net_device * net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + long ioaddr = net_dev->base_addr; + u32 rfcrSave; + u32 i; + + rfcrSave = inl(rfcr + ioaddr); + + /* disable packet filtering before setting filter */ + outl(rfcrSave & ~RFEN, rfcr + ioaddr); + + /* load MAC addr to filter data register */ + for (i = 0 ; i < 3 ; i++) { + u32 w; + + w = (u32) *((u16 *)(net_dev->dev_addr)+i); + outl((i << RFADDR_shift), ioaddr + rfcr); + outl(w, ioaddr + rfdr); + + if (netif_msg_hw(sis_priv)) { + printk(KERN_DEBUG "%s: Receive Filter Addrss[%d]=%x\n", + net_dev->name, i, inl(ioaddr + rfdr)); + } + } + + /* enable packet filtering */ + outl(rfcrSave | RFEN, rfcr + ioaddr); +} + +/** + * sis900_init_tx_ring - Initialize the Tx descriptor ring + * @net_dev: the net device to initialize for + * + * Initialize the Tx descriptor ring, + */ + +static void +sis900_init_tx_ring(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + long ioaddr = net_dev->base_addr; + int i; + + sis_priv->tx_full = 0; + sis_priv->dirty_tx = sis_priv->cur_tx = 0; + + for (i = 0; i < NUM_TX_DESC; i++) { + sis_priv->tx_skbuff[i] = NULL; + + sis_priv->tx_ring[i].link = sis_priv->tx_ring_dma + + ((i+1)%NUM_TX_DESC)*sizeof(BufferDesc); + sis_priv->tx_ring[i].cmdsts = 0; + sis_priv->tx_ring[i].bufptr = 0; + } + + /* load Transmit Descriptor Register */ + outl(sis_priv->tx_ring_dma, ioaddr + txdp); + if (netif_msg_hw(sis_priv)) + printk(KERN_DEBUG "%s: TX descriptor register loaded with: %8.8x\n", + net_dev->name, inl(ioaddr + txdp)); +} + +/** + * sis900_init_rx_ring - Initialize the Rx descriptor ring + * @net_dev: the net device to initialize for + * + * Initialize the Rx descriptor ring, + * and pre-allocate recevie buffers (socket buffer) + */ + +static void +sis900_init_rx_ring(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + long ioaddr = net_dev->base_addr; + int i; + + sis_priv->cur_rx = 0; + sis_priv->dirty_rx = 0; + + /* init RX descriptor */ + for (i = 0; i < NUM_RX_DESC; i++) { + sis_priv->rx_skbuff[i] = NULL; + + sis_priv->rx_ring[i].link = sis_priv->rx_ring_dma + + ((i+1)%NUM_RX_DESC)*sizeof(BufferDesc); + sis_priv->rx_ring[i].cmdsts = 0; + sis_priv->rx_ring[i].bufptr = 0; + } + + /* allocate sock buffers */ + for (i = 0; i < NUM_RX_DESC; i++) { + struct sk_buff *skb; + + if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { + /* not enough memory for skbuff, this makes a "hole" + on the buffer ring, it is not clear how the + hardware will react to this kind of degenerated + buffer */ + break; + } + sis_priv->rx_skbuff[i] = skb; + sis_priv->rx_ring[i].cmdsts = RX_BUF_SIZE; + sis_priv->rx_ring[i].bufptr = pci_map_single(sis_priv->pci_dev, + skb->data, RX_BUF_SIZE, PCI_DMA_FROMDEVICE); + } + sis_priv->dirty_rx = (unsigned int) (i - NUM_RX_DESC); + + /* load Receive Descriptor Register */ + outl(sis_priv->rx_ring_dma, ioaddr + rxdp); + if (netif_msg_hw(sis_priv)) + printk(KERN_DEBUG "%s: RX descriptor register loaded with: %8.8x\n", + net_dev->name, inl(ioaddr + rxdp)); +} + +/** + * sis630_set_eq - set phy equalizer value for 630 LAN + * @net_dev: the net device to set equalizer value + * @revision: 630 LAN revision number + * + * 630E equalizer workaround rule(Cyrus Huang 08/15) + * PHY register 14h(Test) + * Bit 14: 0 -- Automatically detect (default) + * 1 -- Manually set Equalizer filter + * Bit 13: 0 -- (Default) + * 1 -- Speed up convergence of equalizer setting + * Bit 9 : 0 -- (Default) + * 1 -- Disable Baseline Wander + * Bit 3~7 -- Equalizer filter setting + * Link ON: Set Bit 9, 13 to 1, Bit 14 to 0 + * Then calculate equalizer value + * Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0 + * Link Off:Set Bit 13 to 1, Bit 14 to 0 + * Calculate Equalizer value: + * When Link is ON and Bit 14 is 0, SIS900PHY will auto-detect proper equalizer value. + * When the equalizer is stable, this value is not a fixed value. It will be within + * a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9) + * 0 <= max <= 4 --> set equalizer to max + * 5 <= max <= 14 --> set equalizer to max+1 or set equalizer to max+2 if max == min + * max >= 15 --> set equalizer to max+5 or set equalizer to max+6 if max == min + */ + +static void sis630_set_eq(struct net_device *net_dev, u8 revision) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + u16 reg14h, eq_value=0, max_value=0, min_value=0; + int i, maxcount=10; + + if ( !(revision == SIS630E_900_REV || revision == SIS630EA1_900_REV || + revision == SIS630A_900_REV || revision == SIS630ET_900_REV) ) + return; + + if (netif_carrier_ok(net_dev)) { + reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, + (0x2200 | reg14h) & 0xBFFF); + for (i=0; i < maxcount; i++) { + eq_value = (0x00F8 & mdio_read(net_dev, + sis_priv->cur_phy, MII_RESV)) >> 3; + if (i == 0) + max_value=min_value=eq_value; + max_value = (eq_value > max_value) ? + eq_value : max_value; + min_value = (eq_value < min_value) ? + eq_value : min_value; + } + /* 630E rule to determine the equalizer value */ + if (revision == SIS630E_900_REV || revision == SIS630EA1_900_REV || + revision == SIS630ET_900_REV) { + if (max_value < 5) + eq_value = max_value; + else if (max_value >= 5 && max_value < 15) + eq_value = (max_value == min_value) ? + max_value+2 : max_value+1; + else if (max_value >= 15) + eq_value=(max_value == min_value) ? + max_value+6 : max_value+5; + } + /* 630B0&B1 rule to determine the equalizer value */ + if (revision == SIS630A_900_REV && + (sis_priv->host_bridge_rev == SIS630B0 || + sis_priv->host_bridge_rev == SIS630B1)) { + if (max_value == 0) + eq_value = 3; + else + eq_value = (max_value + min_value + 1)/2; + } + /* write equalizer value and setting */ + reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + reg14h = (reg14h & 0xFF07) | ((eq_value << 3) & 0x00F8); + reg14h = (reg14h | 0x6000) & 0xFDFF; + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, reg14h); + } else { + reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + if (revision == SIS630A_900_REV && + (sis_priv->host_bridge_rev == SIS630B0 || + sis_priv->host_bridge_rev == SIS630B1)) + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, + (reg14h | 0x2200) & 0xBFFF); + else + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, + (reg14h | 0x2000) & 0xBFFF); + } +} + +/** + * sis900_timer - sis900 timer routine + * @data: pointer to sis900 net device + * + * On each timer ticks we check two things, + * link status (ON/OFF) and link mode (10/100/Full/Half) + */ + +static void sis900_timer(unsigned long data) +{ + struct net_device *net_dev = (struct net_device *)data; + struct sis900_private *sis_priv = netdev_priv(net_dev); + struct mii_phy *mii_phy = sis_priv->mii; + static const int next_tick = 5*HZ; + u16 status; + + if (!sis_priv->autong_complete){ + int uninitialized_var(speed), duplex = 0; + + sis900_read_mode(net_dev, &speed, &duplex); + if (duplex){ + sis900_set_mode(net_dev->base_addr, speed, duplex); + sis630_set_eq(net_dev, sis_priv->chipset_rev); + netif_start_queue(net_dev); + } + + sis_priv->timer.expires = jiffies + HZ; + add_timer(&sis_priv->timer); + return; + } + + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + + /* Link OFF -> ON */ + if (!netif_carrier_ok(net_dev)) { + LookForLink: + /* Search for new PHY */ + status = sis900_default_phy(net_dev); + mii_phy = sis_priv->mii; + + if (status & MII_STAT_LINK){ + sis900_check_mode(net_dev, mii_phy); + netif_carrier_on(net_dev); + } + } else { + /* Link ON -> OFF */ + if (!(status & MII_STAT_LINK)){ + netif_carrier_off(net_dev); + if(netif_msg_link(sis_priv)) + printk(KERN_INFO "%s: Media Link Off\n", net_dev->name); + + /* Change mode issue */ + if ((mii_phy->phy_id0 == 0x001D) && + ((mii_phy->phy_id1 & 0xFFF0) == 0x8000)) + sis900_reset_phy(net_dev, sis_priv->cur_phy); + + sis630_set_eq(net_dev, sis_priv->chipset_rev); + + goto LookForLink; + } + } + + sis_priv->timer.expires = jiffies + next_tick; + add_timer(&sis_priv->timer); +} + +/** + * sis900_check_mode - check the media mode for sis900 + * @net_dev: the net device to be checked + * @mii_phy: the mii phy + * + * Older driver gets the media mode from mii status output + * register. Now we set our media capability and auto-negotiate + * to get the upper bound of speed and duplex between two ends. + * If the types of mii phy is HOME, it doesn't need to auto-negotiate + * and autong_complete should be set to 1. + */ + +static void sis900_check_mode(struct net_device *net_dev, struct mii_phy *mii_phy) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + long ioaddr = net_dev->base_addr; + int speed, duplex; + + if (mii_phy->phy_types == LAN) { + outl(~EXD & inl(ioaddr + cfg), ioaddr + cfg); + sis900_set_capability(net_dev , mii_phy); + sis900_auto_negotiate(net_dev, sis_priv->cur_phy); + } else { + outl(EXD | inl(ioaddr + cfg), ioaddr + cfg); + speed = HW_SPEED_HOME; + duplex = FDX_CAPABLE_HALF_SELECTED; + sis900_set_mode(ioaddr, speed, duplex); + sis_priv->autong_complete = 1; + } +} + +/** + * sis900_set_mode - Set the media mode of mac register. + * @ioaddr: the address of the device + * @speed : the transmit speed to be determined + * @duplex: the duplex mode to be determined + * + * Set the media mode of mac register txcfg/rxcfg according to + * speed and duplex of phy. Bit EDB_MASTER_EN indicates the EDB + * bus is used instead of PCI bus. When this bit is set 1, the + * Max DMA Burst Size for TX/RX DMA should be no larger than 16 + * double words. + */ + +static void sis900_set_mode (long ioaddr, int speed, int duplex) +{ + u32 tx_flags = 0, rx_flags = 0; + + if (inl(ioaddr + cfg) & EDB_MASTER_EN) { + tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) | + (TX_FILL_THRESH << TxFILLT_shift); + rx_flags = DMA_BURST_64 << RxMXDMA_shift; + } else { + tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) | + (TX_FILL_THRESH << TxFILLT_shift); + rx_flags = DMA_BURST_512 << RxMXDMA_shift; + } + + if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS) { + rx_flags |= (RxDRNT_10 << RxDRNT_shift); + tx_flags |= (TxDRNT_10 << TxDRNT_shift); + } else { + rx_flags |= (RxDRNT_100 << RxDRNT_shift); + tx_flags |= (TxDRNT_100 << TxDRNT_shift); + } + + if (duplex == FDX_CAPABLE_FULL_SELECTED) { + tx_flags |= (TxCSI | TxHBI); + rx_flags |= RxATX; + } + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) + /* Can accept Jumbo packet */ + rx_flags |= RxAJAB; +#endif + + outl (tx_flags, ioaddr + txcfg); + outl (rx_flags, ioaddr + rxcfg); +} + +/** + * sis900_auto_negotiate - Set the Auto-Negotiation Enable/Reset bit. + * @net_dev: the net device to read mode for + * @phy_addr: mii phy address + * + * If the adapter is link-on, set the auto-negotiate enable/reset bit. + * autong_complete should be set to 0 when starting auto-negotiation. + * autong_complete should be set to 1 if we didn't start auto-negotiation. + * sis900_timer will wait for link on again if autong_complete = 0. + */ + +static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + int i = 0; + u32 status; + + for (i = 0; i < 2; i++) + status = mdio_read(net_dev, phy_addr, MII_STATUS); + + if (!(status & MII_STAT_LINK)){ + if(netif_msg_link(sis_priv)) + printk(KERN_INFO "%s: Media Link Off\n", net_dev->name); + sis_priv->autong_complete = 1; + netif_carrier_off(net_dev); + return; + } + + /* (Re)start AutoNegotiate */ + mdio_write(net_dev, phy_addr, MII_CONTROL, + MII_CNTL_AUTO | MII_CNTL_RST_AUTO); + sis_priv->autong_complete = 0; +} + + +/** + * sis900_read_mode - read media mode for sis900 internal phy + * @net_dev: the net device to read mode for + * @speed : the transmit speed to be determined + * @duplex : the duplex mode to be determined + * + * The capability of remote end will be put in mii register autorec + * after auto-negotiation. Use AND operation to get the upper bound + * of speed and duplex between two ends. + */ + +static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + struct mii_phy *phy = sis_priv->mii; + int phy_addr = sis_priv->cur_phy; + u32 status; + u16 autoadv, autorec; + int i; + + for (i = 0; i < 2; i++) + status = mdio_read(net_dev, phy_addr, MII_STATUS); + + if (!(status & MII_STAT_LINK)) + return; + + /* AutoNegotiate completed */ + autoadv = mdio_read(net_dev, phy_addr, MII_ANADV); + autorec = mdio_read(net_dev, phy_addr, MII_ANLPAR); + status = autoadv & autorec; + + *speed = HW_SPEED_10_MBPS; + *duplex = FDX_CAPABLE_HALF_SELECTED; + + if (status & (MII_NWAY_TX | MII_NWAY_TX_FDX)) + *speed = HW_SPEED_100_MBPS; + if (status & ( MII_NWAY_TX_FDX | MII_NWAY_T_FDX)) + *duplex = FDX_CAPABLE_FULL_SELECTED; + + sis_priv->autong_complete = 1; + + /* Workaround for Realtek RTL8201 PHY issue */ + if ((phy->phy_id0 == 0x0000) && ((phy->phy_id1 & 0xFFF0) == 0x8200)) { + if (mdio_read(net_dev, phy_addr, MII_CONTROL) & MII_CNTL_FDX) + *duplex = FDX_CAPABLE_FULL_SELECTED; + if (mdio_read(net_dev, phy_addr, 0x0019) & 0x01) + *speed = HW_SPEED_100_MBPS; + } + + if(netif_msg_link(sis_priv)) + printk(KERN_INFO "%s: Media Link On %s %s-duplex\n", + net_dev->name, + *speed == HW_SPEED_100_MBPS ? + "100mbps" : "10mbps", + *duplex == FDX_CAPABLE_FULL_SELECTED ? + "full" : "half"); +} + +/** + * sis900_tx_timeout - sis900 transmit timeout routine + * @net_dev: the net device to transmit + * + * print transmit timeout status + * disable interrupts and do some tasks + */ + +static void sis900_tx_timeout(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + long ioaddr = net_dev->base_addr; + unsigned long flags; + int i; + + if(netif_msg_tx_err(sis_priv)) + printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x\n", + net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr)); + + /* Disable interrupts by clearing the interrupt mask. */ + outl(0x0000, ioaddr + imr); + + /* use spinlock to prevent interrupt handler accessing buffer ring */ + spin_lock_irqsave(&sis_priv->lock, flags); + + /* discard unsent packets */ + sis_priv->dirty_tx = sis_priv->cur_tx = 0; + for (i = 0; i < NUM_TX_DESC; i++) { + struct sk_buff *skb = sis_priv->tx_skbuff[i]; + + if (skb) { + pci_unmap_single(sis_priv->pci_dev, + sis_priv->tx_ring[i].bufptr, skb->len, + PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + sis_priv->tx_skbuff[i] = NULL; + sis_priv->tx_ring[i].cmdsts = 0; + sis_priv->tx_ring[i].bufptr = 0; + net_dev->stats.tx_dropped++; + } + } + sis_priv->tx_full = 0; + netif_wake_queue(net_dev); + + spin_unlock_irqrestore(&sis_priv->lock, flags); + + net_dev->trans_start = jiffies; /* prevent tx timeout */ + + /* load Transmit Descriptor Register */ + outl(sis_priv->tx_ring_dma, ioaddr + txdp); + + /* Enable all known interrupts by setting the interrupt mask. */ + outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr); +} + +/** + * sis900_start_xmit - sis900 start transmit routine + * @skb: socket buffer pointer to put the data being transmitted + * @net_dev: the net device to transmit with + * + * Set the transmit buffer descriptor, + * and write TxENA to enable transmit state machine. + * tell upper layer if the buffer is full + */ + +static netdev_tx_t +sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + long ioaddr = net_dev->base_addr; + unsigned int entry; + unsigned long flags; + unsigned int index_cur_tx, index_dirty_tx; + unsigned int count_dirty_tx; + + /* Don't transmit data before the complete of auto-negotiation */ + if(!sis_priv->autong_complete){ + netif_stop_queue(net_dev); + return NETDEV_TX_BUSY; + } + + spin_lock_irqsave(&sis_priv->lock, flags); + + /* Calculate the next Tx descriptor entry. */ + entry = sis_priv->cur_tx % NUM_TX_DESC; + sis_priv->tx_skbuff[entry] = skb; + + /* set the transmit buffer descriptor and enable Transmit State Machine */ + sis_priv->tx_ring[entry].bufptr = pci_map_single(sis_priv->pci_dev, + skb->data, skb->len, PCI_DMA_TODEVICE); + sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len); + outl(TxENA | inl(ioaddr + cr), ioaddr + cr); + + sis_priv->cur_tx ++; + index_cur_tx = sis_priv->cur_tx; + index_dirty_tx = sis_priv->dirty_tx; + + for (count_dirty_tx = 0; index_cur_tx != index_dirty_tx; index_dirty_tx++) + count_dirty_tx ++; + + if (index_cur_tx == index_dirty_tx) { + /* dirty_tx is met in the cycle of cur_tx, buffer full */ + sis_priv->tx_full = 1; + netif_stop_queue(net_dev); + } else if (count_dirty_tx < NUM_TX_DESC) { + /* Typical path, tell upper layer that more transmission is possible */ + netif_start_queue(net_dev); + } else { + /* buffer full, tell upper layer no more transmission */ + sis_priv->tx_full = 1; + netif_stop_queue(net_dev); + } + + spin_unlock_irqrestore(&sis_priv->lock, flags); + + if (netif_msg_tx_queued(sis_priv)) + printk(KERN_DEBUG "%s: Queued Tx packet at %p size %d " + "to slot %d.\n", + net_dev->name, skb->data, (int)skb->len, entry); + + return NETDEV_TX_OK; +} + +/** + * sis900_interrupt - sis900 interrupt handler + * @irq: the irq number + * @dev_instance: the client data object + * + * The interrupt handler does all of the Rx thread work, + * and cleans up after the Tx thread + */ + +static irqreturn_t sis900_interrupt(int irq, void *dev_instance) +{ + struct net_device *net_dev = dev_instance; + struct sis900_private *sis_priv = netdev_priv(net_dev); + int boguscnt = max_interrupt_work; + long ioaddr = net_dev->base_addr; + u32 status; + unsigned int handled = 0; + + spin_lock (&sis_priv->lock); + + do { + status = inl(ioaddr + isr); + + if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0) + /* nothing intresting happened */ + break; + handled = 1; + + /* why dow't we break after Tx/Rx case ?? keyword: full-duplex */ + if (status & (RxORN | RxERR | RxOK)) + /* Rx interrupt */ + sis900_rx(net_dev); + + if (status & (TxURN | TxERR | TxIDLE)) + /* Tx interrupt */ + sis900_finish_xmit(net_dev); + + /* something strange happened !!! */ + if (status & HIBERR) { + if(netif_msg_intr(sis_priv)) + printk(KERN_INFO "%s: Abnormal interrupt, " + "status %#8.8x.\n", net_dev->name, status); + break; + } + if (--boguscnt < 0) { + if(netif_msg_intr(sis_priv)) + printk(KERN_INFO "%s: Too much work at interrupt, " + "interrupt status = %#8.8x.\n", + net_dev->name, status); + break; + } + } while (1); + + if(netif_msg_intr(sis_priv)) + printk(KERN_DEBUG "%s: exiting interrupt, " + "interrupt status = 0x%#8.8x.\n", + net_dev->name, inl(ioaddr + isr)); + + spin_unlock (&sis_priv->lock); + return IRQ_RETVAL(handled); +} + +/** + * sis900_rx - sis900 receive routine + * @net_dev: the net device which receives data + * + * Process receive interrupt events, + * put buffer to higher layer and refill buffer pool + * Note: This function is called by interrupt handler, + * don't do "too much" work here + */ + +static int sis900_rx(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + long ioaddr = net_dev->base_addr; + unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC; + u32 rx_status = sis_priv->rx_ring[entry].cmdsts; + int rx_work_limit; + + if (netif_msg_rx_status(sis_priv)) + printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d " + "status:0x%8.8x\n", + sis_priv->cur_rx, sis_priv->dirty_rx, rx_status); + rx_work_limit = sis_priv->dirty_rx + NUM_RX_DESC - sis_priv->cur_rx; + + while (rx_status & OWN) { + unsigned int rx_size; + unsigned int data_size; + + if (--rx_work_limit < 0) + break; + + data_size = rx_status & DSIZE; + rx_size = data_size - CRC_SIZE; + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) + /* ``TOOLONG'' flag means jumbo packet received. */ + if ((rx_status & TOOLONG) && data_size <= MAX_FRAME_SIZE) + rx_status &= (~ ((unsigned int)TOOLONG)); +#endif + + if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) { + /* corrupted packet received */ + if (netif_msg_rx_err(sis_priv)) + printk(KERN_DEBUG "%s: Corrupted packet " + "received, buffer status = 0x%8.8x/%d.\n", + net_dev->name, rx_status, data_size); + net_dev->stats.rx_errors++; + if (rx_status & OVERRUN) + net_dev->stats.rx_over_errors++; + if (rx_status & (TOOLONG|RUNT)) + net_dev->stats.rx_length_errors++; + if (rx_status & (RXISERR | FAERR)) + net_dev->stats.rx_frame_errors++; + if (rx_status & CRCERR) + net_dev->stats.rx_crc_errors++; + /* reset buffer descriptor state */ + sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; + } else { + struct sk_buff * skb; + struct sk_buff * rx_skb; + + pci_unmap_single(sis_priv->pci_dev, + sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE, + PCI_DMA_FROMDEVICE); + + /* refill the Rx buffer, what if there is not enough + * memory for new socket buffer ?? */ + if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { + /* + * Not enough memory to refill the buffer + * so we need to recycle the old one so + * as to avoid creating a memory hole + * in the rx ring + */ + skb = sis_priv->rx_skbuff[entry]; + net_dev->stats.rx_dropped++; + goto refill_rx_ring; + } + + /* This situation should never happen, but due to + some unknown bugs, it is possible that + we are working on NULL sk_buff :-( */ + if (sis_priv->rx_skbuff[entry] == NULL) { + if (netif_msg_rx_err(sis_priv)) + printk(KERN_WARNING "%s: NULL pointer " + "encountered in Rx ring\n" + "cur_rx:%4.4d, dirty_rx:%4.4d\n", + net_dev->name, sis_priv->cur_rx, + sis_priv->dirty_rx); + dev_kfree_skb(skb); + break; + } + + /* give the socket buffer to upper layers */ + rx_skb = sis_priv->rx_skbuff[entry]; + skb_put(rx_skb, rx_size); + rx_skb->protocol = eth_type_trans(rx_skb, net_dev); + netif_rx(rx_skb); + + /* some network statistics */ + if ((rx_status & BCAST) == MCAST) + net_dev->stats.multicast++; + net_dev->stats.rx_bytes += rx_size; + net_dev->stats.rx_packets++; + sis_priv->dirty_rx++; +refill_rx_ring: + sis_priv->rx_skbuff[entry] = skb; + sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; + sis_priv->rx_ring[entry].bufptr = + pci_map_single(sis_priv->pci_dev, skb->data, + RX_BUF_SIZE, PCI_DMA_FROMDEVICE); + } + sis_priv->cur_rx++; + entry = sis_priv->cur_rx % NUM_RX_DESC; + rx_status = sis_priv->rx_ring[entry].cmdsts; + } // while + + /* refill the Rx buffer, what if the rate of refilling is slower + * than consuming ?? */ + for (; sis_priv->cur_rx != sis_priv->dirty_rx; sis_priv->dirty_rx++) { + struct sk_buff *skb; + + entry = sis_priv->dirty_rx % NUM_RX_DESC; + + if (sis_priv->rx_skbuff[entry] == NULL) { + if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { + /* not enough memory for skbuff, this makes a + * "hole" on the buffer ring, it is not clear + * how the hardware will react to this kind + * of degenerated buffer */ + if (netif_msg_rx_err(sis_priv)) + printk(KERN_INFO "%s: Memory squeeze, " + "deferring packet.\n", + net_dev->name); + net_dev->stats.rx_dropped++; + break; + } + sis_priv->rx_skbuff[entry] = skb; + sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; + sis_priv->rx_ring[entry].bufptr = + pci_map_single(sis_priv->pci_dev, skb->data, + RX_BUF_SIZE, PCI_DMA_FROMDEVICE); + } + } + /* re-enable the potentially idle receive state matchine */ + outl(RxENA | inl(ioaddr + cr), ioaddr + cr ); + + return 0; +} + +/** + * sis900_finish_xmit - finish up transmission of packets + * @net_dev: the net device to be transmitted on + * + * Check for error condition and free socket buffer etc + * schedule for more transmission as needed + * Note: This function is called by interrupt handler, + * don't do "too much" work here + */ + +static void sis900_finish_xmit (struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + + for (; sis_priv->dirty_tx != sis_priv->cur_tx; sis_priv->dirty_tx++) { + struct sk_buff *skb; + unsigned int entry; + u32 tx_status; + + entry = sis_priv->dirty_tx % NUM_TX_DESC; + tx_status = sis_priv->tx_ring[entry].cmdsts; + + if (tx_status & OWN) { + /* The packet is not transmitted yet (owned by hardware) ! + * Note: the interrupt is generated only when Tx Machine + * is idle, so this is an almost impossible case */ + break; + } + + if (tx_status & (ABORT | UNDERRUN | OWCOLL)) { + /* packet unsuccessfully transmitted */ + if (netif_msg_tx_err(sis_priv)) + printk(KERN_DEBUG "%s: Transmit " + "error, Tx status %8.8x.\n", + net_dev->name, tx_status); + net_dev->stats.tx_errors++; + if (tx_status & UNDERRUN) + net_dev->stats.tx_fifo_errors++; + if (tx_status & ABORT) + net_dev->stats.tx_aborted_errors++; + if (tx_status & NOCARRIER) + net_dev->stats.tx_carrier_errors++; + if (tx_status & OWCOLL) + net_dev->stats.tx_window_errors++; + } else { + /* packet successfully transmitted */ + net_dev->stats.collisions += (tx_status & COLCNT) >> 16; + net_dev->stats.tx_bytes += tx_status & DSIZE; + net_dev->stats.tx_packets++; + } + /* Free the original skb. */ + skb = sis_priv->tx_skbuff[entry]; + pci_unmap_single(sis_priv->pci_dev, + sis_priv->tx_ring[entry].bufptr, skb->len, + PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + sis_priv->tx_skbuff[entry] = NULL; + sis_priv->tx_ring[entry].bufptr = 0; + sis_priv->tx_ring[entry].cmdsts = 0; + } + + if (sis_priv->tx_full && netif_queue_stopped(net_dev) && + sis_priv->cur_tx - sis_priv->dirty_tx < NUM_TX_DESC - 4) { + /* The ring is no longer full, clear tx_full and schedule + * more transmission by netif_wake_queue(net_dev) */ + sis_priv->tx_full = 0; + netif_wake_queue (net_dev); + } +} + +/** + * sis900_close - close sis900 device + * @net_dev: the net device to be closed + * + * Disable interrupts, stop the Tx and Rx Status Machine + * free Tx and RX socket buffer + */ + +static int sis900_close(struct net_device *net_dev) +{ + long ioaddr = net_dev->base_addr; + struct sis900_private *sis_priv = netdev_priv(net_dev); + struct sk_buff *skb; + int i; + + netif_stop_queue(net_dev); + + /* Disable interrupts by clearing the interrupt mask. */ + outl(0x0000, ioaddr + imr); + outl(0x0000, ioaddr + ier); + + /* Stop the chip's Tx and Rx Status Machine */ + outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr); + + del_timer(&sis_priv->timer); + + free_irq(net_dev->irq, net_dev); + + /* Free Tx and RX skbuff */ + for (i = 0; i < NUM_RX_DESC; i++) { + skb = sis_priv->rx_skbuff[i]; + if (skb) { + pci_unmap_single(sis_priv->pci_dev, + sis_priv->rx_ring[i].bufptr, + RX_BUF_SIZE, PCI_DMA_FROMDEVICE); + dev_kfree_skb(skb); + sis_priv->rx_skbuff[i] = NULL; + } + } + for (i = 0; i < NUM_TX_DESC; i++) { + skb = sis_priv->tx_skbuff[i]; + if (skb) { + pci_unmap_single(sis_priv->pci_dev, + sis_priv->tx_ring[i].bufptr, skb->len, + PCI_DMA_TODEVICE); + dev_kfree_skb(skb); + sis_priv->tx_skbuff[i] = NULL; + } + } + + /* Green! Put the chip in low-power mode. */ + + return 0; +} + +/** + * sis900_get_drvinfo - Return information about driver + * @net_dev: the net device to probe + * @info: container for info returned + * + * Process ethtool command such as "ehtool -i" to show information + */ + +static void sis900_get_drvinfo(struct net_device *net_dev, + struct ethtool_drvinfo *info) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + + strcpy (info->driver, SIS900_MODULE_NAME); + strcpy (info->version, SIS900_DRV_VERSION); + strcpy (info->bus_info, pci_name(sis_priv->pci_dev)); +} + +static u32 sis900_get_msglevel(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + return sis_priv->msg_enable; +} + +static void sis900_set_msglevel(struct net_device *net_dev, u32 value) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + sis_priv->msg_enable = value; +} + +static u32 sis900_get_link(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + return mii_link_ok(&sis_priv->mii_info); +} + +static int sis900_get_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + spin_lock_irq(&sis_priv->lock); + mii_ethtool_gset(&sis_priv->mii_info, cmd); + spin_unlock_irq(&sis_priv->lock); + return 0; +} + +static int sis900_set_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + int rt; + spin_lock_irq(&sis_priv->lock); + rt = mii_ethtool_sset(&sis_priv->mii_info, cmd); + spin_unlock_irq(&sis_priv->lock); + return rt; +} + +static int sis900_nway_reset(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + return mii_nway_restart(&sis_priv->mii_info); +} + +/** + * sis900_set_wol - Set up Wake on Lan registers + * @net_dev: the net device to probe + * @wol: container for info passed to the driver + * + * Process ethtool command "wol" to setup wake on lan features. + * SiS900 supports sending WoL events if a correct packet is received, + * but there is no simple way to filter them to only a subset (broadcast, + * multicast, unicast or arp). + */ + +static int sis900_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + long pmctrl_addr = net_dev->base_addr + pmctrl; + u32 cfgpmcsr = 0, pmctrl_bits = 0; + + if (wol->wolopts == 0) { + pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr); + cfgpmcsr &= ~PME_EN; + pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr); + outl(pmctrl_bits, pmctrl_addr); + if (netif_msg_wol(sis_priv)) + printk(KERN_DEBUG "%s: Wake on LAN disabled\n", net_dev->name); + return 0; + } + + if (wol->wolopts & (WAKE_MAGICSECURE | WAKE_UCAST | WAKE_MCAST + | WAKE_BCAST | WAKE_ARP)) + return -EINVAL; + + if (wol->wolopts & WAKE_MAGIC) + pmctrl_bits |= MAGICPKT; + if (wol->wolopts & WAKE_PHY) + pmctrl_bits |= LINKON; + + outl(pmctrl_bits, pmctrl_addr); + + pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr); + cfgpmcsr |= PME_EN; + pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr); + if (netif_msg_wol(sis_priv)) + printk(KERN_DEBUG "%s: Wake on LAN enabled\n", net_dev->name); + + return 0; +} + +static void sis900_get_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol) +{ + long pmctrl_addr = net_dev->base_addr + pmctrl; + u32 pmctrl_bits; + + pmctrl_bits = inl(pmctrl_addr); + if (pmctrl_bits & MAGICPKT) + wol->wolopts |= WAKE_MAGIC; + if (pmctrl_bits & LINKON) + wol->wolopts |= WAKE_PHY; + + wol->supported = (WAKE_PHY | WAKE_MAGIC); +} + +static const struct ethtool_ops sis900_ethtool_ops = { + .get_drvinfo = sis900_get_drvinfo, + .get_msglevel = sis900_get_msglevel, + .set_msglevel = sis900_set_msglevel, + .get_link = sis900_get_link, + .get_settings = sis900_get_settings, + .set_settings = sis900_set_settings, + .nway_reset = sis900_nway_reset, + .get_wol = sis900_get_wol, + .set_wol = sis900_set_wol +}; + +/** + * mii_ioctl - process MII i/o control command + * @net_dev: the net device to command for + * @rq: parameter for command + * @cmd: the i/o command + * + * Process MII command like read/write MII register + */ + +static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + struct mii_ioctl_data *data = if_mii(rq); + + switch(cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + data->phy_id = sis_priv->mii->phy_addr; + /* Fall Through */ + + case SIOCGMIIREG: /* Read MII PHY register. */ + data->val_out = mdio_read(net_dev, data->phy_id & 0x1f, data->reg_num & 0x1f); + return 0; + + case SIOCSMIIREG: /* Write MII PHY register. */ + mdio_write(net_dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); + return 0; + default: + return -EOPNOTSUPP; + } +} + +/** + * sis900_set_config - Set media type by net_device.set_config + * @dev: the net device for media type change + * @map: ifmap passed by ifconfig + * + * Set media type to 10baseT, 100baseT or 0(for auto) by ifconfig + * we support only port changes. All other runtime configuration + * changes will be ignored + */ + +static int sis900_set_config(struct net_device *dev, struct ifmap *map) +{ + struct sis900_private *sis_priv = netdev_priv(dev); + struct mii_phy *mii_phy = sis_priv->mii; + + u16 status; + + if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { + /* we switch on the ifmap->port field. I couldn't find anything + * like a definition or standard for the values of that field. + * I think the meaning of those values is device specific. But + * since I would like to change the media type via the ifconfig + * command I use the definition from linux/netdevice.h + * (which seems to be different from the ifport(pcmcia) definition) */ + switch(map->port){ + case IF_PORT_UNKNOWN: /* use auto here */ + dev->if_port = map->port; + /* we are going to change the media type, so the Link + * will be temporary down and we need to reflect that + * here. When the Link comes up again, it will be + * sensed by the sis_timer procedure, which also does + * all the rest for us */ + netif_carrier_off(dev); + + /* read current state */ + status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL); + + /* enable auto negotiation and reset the negotioation + * (I don't really know what the auto negatiotiation + * reset really means, but it sounds for me right to + * do one here) */ + mdio_write(dev, mii_phy->phy_addr, + MII_CONTROL, status | MII_CNTL_AUTO | MII_CNTL_RST_AUTO); + + break; + + case IF_PORT_10BASET: /* 10BaseT */ + dev->if_port = map->port; + + /* we are going to change the media type, so the Link + * will be temporary down and we need to reflect that + * here. When the Link comes up again, it will be + * sensed by the sis_timer procedure, which also does + * all the rest for us */ + netif_carrier_off(dev); + + /* set Speed to 10Mbps */ + /* read current state */ + status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL); + + /* disable auto negotiation and force 10MBit mode*/ + mdio_write(dev, mii_phy->phy_addr, + MII_CONTROL, status & ~(MII_CNTL_SPEED | + MII_CNTL_AUTO)); + break; + + case IF_PORT_100BASET: /* 100BaseT */ + case IF_PORT_100BASETX: /* 100BaseTx */ + dev->if_port = map->port; + + /* we are going to change the media type, so the Link + * will be temporary down and we need to reflect that + * here. When the Link comes up again, it will be + * sensed by the sis_timer procedure, which also does + * all the rest for us */ + netif_carrier_off(dev); + + /* set Speed to 100Mbps */ + /* disable auto negotiation and enable 100MBit Mode */ + status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL); + mdio_write(dev, mii_phy->phy_addr, + MII_CONTROL, (status & ~MII_CNTL_SPEED) | + MII_CNTL_SPEED); + + break; + + case IF_PORT_10BASE2: /* 10Base2 */ + case IF_PORT_AUI: /* AUI */ + case IF_PORT_100BASEFX: /* 100BaseFx */ + /* These Modes are not supported (are they?)*/ + return -EOPNOTSUPP; + break; + + default: + return -EINVAL; + } + } + return 0; +} + +/** + * sis900_mcast_bitnr - compute hashtable index + * @addr: multicast address + * @revision: revision id of chip + * + * SiS 900 uses the most sigificant 7 bits to index a 128 bits multicast + * hash table, which makes this function a little bit different from other drivers + * SiS 900 B0 & 635 M/B uses the most significat 8 bits to index 256 bits + * multicast hash table. + */ + +static inline u16 sis900_mcast_bitnr(u8 *addr, u8 revision) +{ + + u32 crc = ether_crc(6, addr); + + /* leave 8 or 7 most siginifant bits */ + if ((revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV)) + return (int)(crc >> 24); + else + return (int)(crc >> 25); +} + +/** + * set_rx_mode - Set SiS900 receive mode + * @net_dev: the net device to be set + * + * Set SiS900 receive mode for promiscuous, multicast, or broadcast mode. + * And set the appropriate multicast filter. + * Multicast hash table changes from 128 to 256 bits for 635M/B & 900B0. + */ + +static void set_rx_mode(struct net_device *net_dev) +{ + long ioaddr = net_dev->base_addr; + struct sis900_private *sis_priv = netdev_priv(net_dev); + u16 mc_filter[16] = {0}; /* 256/128 bits multicast hash table */ + int i, table_entries; + u32 rx_mode; + + /* 635 Hash Table entries = 256(2^16) */ + if((sis_priv->chipset_rev >= SIS635A_900_REV) || + (sis_priv->chipset_rev == SIS900B_900_REV)) + table_entries = 16; + else + table_entries = 8; + + if (net_dev->flags & IFF_PROMISC) { + /* Accept any kinds of packets */ + rx_mode = RFPromiscuous; + for (i = 0; i < table_entries; i++) + mc_filter[i] = 0xffff; + } else if ((netdev_mc_count(net_dev) > multicast_filter_limit) || + (net_dev->flags & IFF_ALLMULTI)) { + /* too many multicast addresses or accept all multicast packet */ + rx_mode = RFAAB | RFAAM; + for (i = 0; i < table_entries; i++) + mc_filter[i] = 0xffff; + } else { + /* Accept Broadcast packet, destination address matchs our + * MAC address, use Receive Filter to reject unwanted MCAST + * packets */ + struct netdev_hw_addr *ha; + rx_mode = RFAAB; + + netdev_for_each_mc_addr(ha, net_dev) { + unsigned int bit_nr; + + bit_nr = sis900_mcast_bitnr(ha->addr, + sis_priv->chipset_rev); + mc_filter[bit_nr >> 4] |= (1 << (bit_nr & 0xf)); + } + } + + /* update Multicast Hash Table in Receive Filter */ + for (i = 0; i < table_entries; i++) { + /* why plus 0x04 ??, That makes the correct value for hash table. */ + outl((u32)(0x00000004+i) << RFADDR_shift, ioaddr + rfcr); + outl(mc_filter[i], ioaddr + rfdr); + } + + outl(RFEN | rx_mode, ioaddr + rfcr); + + /* sis900 is capable of looping back packets at MAC level for + * debugging purpose */ + if (net_dev->flags & IFF_LOOPBACK) { + u32 cr_saved; + /* We must disable Tx/Rx before setting loopback mode */ + cr_saved = inl(ioaddr + cr); + outl(cr_saved | TxDIS | RxDIS, ioaddr + cr); + /* enable loopback */ + outl(inl(ioaddr + txcfg) | TxMLB, ioaddr + txcfg); + outl(inl(ioaddr + rxcfg) | RxATX, ioaddr + rxcfg); + /* restore cr */ + outl(cr_saved, ioaddr + cr); + } +} + +/** + * sis900_reset - Reset sis900 MAC + * @net_dev: the net device to reset + * + * reset sis900 MAC and wait until finished + * reset through command register + * change backoff algorithm for 900B0 & 635 M/B + */ + +static void sis900_reset(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = netdev_priv(net_dev); + long ioaddr = net_dev->base_addr; + int i = 0; + u32 status = TxRCMP | RxRCMP; + + outl(0, ioaddr + ier); + outl(0, ioaddr + imr); + outl(0, ioaddr + rfcr); + + outl(RxRESET | TxRESET | RESET | inl(ioaddr + cr), ioaddr + cr); + + /* Check that the chip has finished the reset. */ + while (status && (i++ < 1000)) { + status ^= (inl(isr + ioaddr) & status); + } + + if( (sis_priv->chipset_rev >= SIS635A_900_REV) || + (sis_priv->chipset_rev == SIS900B_900_REV) ) + outl(PESEL | RND_CNT, ioaddr + cfg); + else + outl(PESEL, ioaddr + cfg); +} + +/** + * sis900_remove - Remove sis900 device + * @pci_dev: the pci device to be removed + * + * remove and release SiS900 net device + */ + +static void __devexit sis900_remove(struct pci_dev *pci_dev) +{ + struct net_device *net_dev = pci_get_drvdata(pci_dev); + struct sis900_private *sis_priv = netdev_priv(net_dev); + struct mii_phy *phy = NULL; + + while (sis_priv->first_mii) { + phy = sis_priv->first_mii; + sis_priv->first_mii = phy->next; + kfree(phy); + } + + pci_free_consistent(pci_dev, RX_TOTAL_SIZE, sis_priv->rx_ring, + sis_priv->rx_ring_dma); + pci_free_consistent(pci_dev, TX_TOTAL_SIZE, sis_priv->tx_ring, + sis_priv->tx_ring_dma); + unregister_netdev(net_dev); + free_netdev(net_dev); + pci_release_regions(pci_dev); + pci_set_drvdata(pci_dev, NULL); +} + +#ifdef CONFIG_PM + +static int sis900_suspend(struct pci_dev *pci_dev, pm_message_t state) +{ + struct net_device *net_dev = pci_get_drvdata(pci_dev); + long ioaddr = net_dev->base_addr; + + if(!netif_running(net_dev)) + return 0; + + netif_stop_queue(net_dev); + netif_device_detach(net_dev); + + /* Stop the chip's Tx and Rx Status Machine */ + outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr); + + pci_set_power_state(pci_dev, PCI_D3hot); + pci_save_state(pci_dev); + + return 0; +} + +static int sis900_resume(struct pci_dev *pci_dev) +{ + struct net_device *net_dev = pci_get_drvdata(pci_dev); + struct sis900_private *sis_priv = netdev_priv(net_dev); + long ioaddr = net_dev->base_addr; + + if(!netif_running(net_dev)) + return 0; + pci_restore_state(pci_dev); + pci_set_power_state(pci_dev, PCI_D0); + + sis900_init_rxfilter(net_dev); + + sis900_init_tx_ring(net_dev); + sis900_init_rx_ring(net_dev); + + set_rx_mode(net_dev); + + netif_device_attach(net_dev); + netif_start_queue(net_dev); + + /* Workaround for EDB */ + sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); + + /* Enable all known interrupts by setting the interrupt mask. */ + outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr); + outl(RxENA | inl(ioaddr + cr), ioaddr + cr); + outl(IE, ioaddr + ier); + + sis900_check_mode(net_dev, sis_priv->mii); + + return 0; +} +#endif /* CONFIG_PM */ + +static struct pci_driver sis900_pci_driver = { + .name = SIS900_MODULE_NAME, + .id_table = sis900_pci_tbl, + .probe = sis900_probe, + .remove = __devexit_p(sis900_remove), +#ifdef CONFIG_PM + .suspend = sis900_suspend, + .resume = sis900_resume, +#endif /* CONFIG_PM */ +}; + +static int __init sis900_init_module(void) +{ +/* when a module, this is printed whether or not devices are found in probe */ +#ifdef MODULE + printk(version); +#endif + + return pci_register_driver(&sis900_pci_driver); +} + +static void __exit sis900_cleanup_module(void) +{ + pci_unregister_driver(&sis900_pci_driver); +} + +module_init(sis900_init_module); +module_exit(sis900_cleanup_module); + diff --git a/drivers/net/ethernet/sis/sis900.h b/drivers/net/ethernet/sis/sis900.h new file mode 100644 index 000000000000..150511a922ef --- /dev/null +++ b/drivers/net/ethernet/sis/sis900.h @@ -0,0 +1,329 @@ +/* sis900.h Definitions for SiS ethernet controllers including 7014/7016 and 900 + * Copyright 1999 Silicon Integrated System Corporation + * References: + * SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support, + * preliminary Rev. 1.0 Jan. 14, 1998 + * SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support, + * preliminary Rev. 1.0 Nov. 10, 1998 + * SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution, + * preliminary Rev. 1.0 Jan. 18, 1998 + * http://www.sis.com.tw/support/databook.htm + */ + +/* + * SiS 7016 and SiS 900 ethernet controller registers + */ + +/* The I/O extent, SiS 900 needs 256 bytes of io address */ +#define SIS900_TOTAL_SIZE 0x100 + +/* Symbolic offsets to registers. */ +enum sis900_registers { + cr=0x0, //Command Register + cfg=0x4, //Configuration Register + mear=0x8, //EEPROM Access Register + ptscr=0xc, //PCI Test Control Register + isr=0x10, //Interrupt Status Register + imr=0x14, //Interrupt Mask Register + ier=0x18, //Interrupt Enable Register + epar=0x18, //Enhanced PHY Access Register + txdp=0x20, //Transmit Descriptor Pointer Register + txcfg=0x24, //Transmit Configuration Register + rxdp=0x30, //Receive Descriptor Pointer Register + rxcfg=0x34, //Receive Configuration Register + flctrl=0x38, //Flow Control Register + rxlen=0x3c, //Receive Packet Length Register + rfcr=0x48, //Receive Filter Control Register + rfdr=0x4C, //Receive Filter Data Register + pmctrl=0xB0, //Power Management Control Register + pmer=0xB4 //Power Management Wake-up Event Register +}; + +/* Symbolic names for bits in various registers */ +enum sis900_command_register_bits { + RELOAD = 0x00000400, ACCESSMODE = 0x00000200,/* ET */ + RESET = 0x00000100, SWI = 0x00000080, RxRESET = 0x00000020, + TxRESET = 0x00000010, RxDIS = 0x00000008, RxENA = 0x00000004, + TxDIS = 0x00000002, TxENA = 0x00000001 +}; + +enum sis900_configuration_register_bits { + DESCRFMT = 0x00000100 /* 7016 specific */, REQALG = 0x00000080, + SB = 0x00000040, POW = 0x00000020, EXD = 0x00000010, + PESEL = 0x00000008, LPM = 0x00000004, BEM = 0x00000001, + /* 635 & 900B Specific */ + RND_CNT = 0x00000400, FAIR_BACKOFF = 0x00000200, + EDB_MASTER_EN = 0x00002000 +}; + +enum sis900_eeprom_access_reigster_bits { + MDC = 0x00000040, MDDIR = 0x00000020, MDIO = 0x00000010, /* 7016 specific */ + EECS = 0x00000008, EECLK = 0x00000004, EEDO = 0x00000002, + EEDI = 0x00000001 +}; + +enum sis900_interrupt_register_bits { + WKEVT = 0x10000000, TxPAUSEEND = 0x08000000, TxPAUSE = 0x04000000, + TxRCMP = 0x02000000, RxRCMP = 0x01000000, DPERR = 0x00800000, + SSERR = 0x00400000, RMABT = 0x00200000, RTABT = 0x00100000, + RxSOVR = 0x00010000, HIBERR = 0x00008000, SWINT = 0x00001000, + MIBINT = 0x00000800, TxURN = 0x00000400, TxIDLE = 0x00000200, + TxERR = 0x00000100, TxDESC = 0x00000080, TxOK = 0x00000040, + RxORN = 0x00000020, RxIDLE = 0x00000010, RxEARLY = 0x00000008, + RxERR = 0x00000004, RxDESC = 0x00000002, RxOK = 0x00000001 +}; + +enum sis900_interrupt_enable_reigster_bits { + IE = 0x00000001 +}; + +/* maximum dma burst for transmission and receive */ +#define MAX_DMA_RANGE 7 /* actually 0 means MAXIMUM !! */ +#define TxMXDMA_shift 20 +#define RxMXDMA_shift 20 + +enum sis900_tx_rx_dma{ + DMA_BURST_512 = 0, DMA_BURST_64 = 5 +}; + +/* transmit FIFO thresholds */ +#define TX_FILL_THRESH 16 /* 1/4 FIFO size */ +#define TxFILLT_shift 8 +#define TxDRNT_shift 0 +#define TxDRNT_100 48 /* 3/4 FIFO size */ +#define TxDRNT_10 16 /* 1/2 FIFO size */ + +enum sis900_transmit_config_register_bits { + TxCSI = 0x80000000, TxHBI = 0x40000000, TxMLB = 0x20000000, + TxATP = 0x10000000, TxIFG = 0x0C000000, TxFILLT = 0x00003F00, + TxDRNT = 0x0000003F +}; + +/* recevie FIFO thresholds */ +#define RxDRNT_shift 1 +#define RxDRNT_100 16 /* 1/2 FIFO size */ +#define RxDRNT_10 24 /* 3/4 FIFO size */ + +enum sis900_reveive_config_register_bits { + RxAEP = 0x80000000, RxARP = 0x40000000, RxATX = 0x10000000, + RxAJAB = 0x08000000, RxDRNT = 0x0000007F +}; + +#define RFAA_shift 28 +#define RFADDR_shift 16 + +enum sis900_receive_filter_control_register_bits { + RFEN = 0x80000000, RFAAB = 0x40000000, RFAAM = 0x20000000, + RFAAP = 0x10000000, RFPromiscuous = (RFAAB|RFAAM|RFAAP) +}; + +enum sis900_reveive_filter_data_mask { + RFDAT = 0x0000FFFF +}; + +/* EEPROM Addresses */ +enum sis900_eeprom_address { + EEPROMSignature = 0x00, EEPROMVendorID = 0x02, EEPROMDeviceID = 0x03, + EEPROMMACAddr = 0x08, EEPROMChecksum = 0x0b +}; + +/* The EEPROM commands include the alway-set leading bit. Refer to NM93Cxx datasheet */ +enum sis900_eeprom_command { + EEread = 0x0180, EEwrite = 0x0140, EEerase = 0x01C0, + EEwriteEnable = 0x0130, EEwriteDisable = 0x0100, + EEeraseAll = 0x0120, EEwriteAll = 0x0110, + EEaddrMask = 0x013F, EEcmdShift = 16 +}; + +/* For SiS962 or SiS963, request the eeprom software access */ +enum sis96x_eeprom_command { + EEREQ = 0x00000400, EEDONE = 0x00000200, EEGNT = 0x00000100 +}; + +/* PCI Registers */ +enum sis900_pci_registers { + CFGPMC = 0x40, + CFGPMCSR = 0x44 +}; + +/* Power management capabilities bits */ +enum sis900_cfgpmc_register_bits { + PMVER = 0x00070000, + DSI = 0x00100000, + PMESP = 0xf8000000 +}; + +enum sis900_pmesp_bits { + PME_D0 = 0x1, + PME_D1 = 0x2, + PME_D2 = 0x4, + PME_D3H = 0x8, + PME_D3C = 0x10 +}; + +/* Power management control/status bits */ +enum sis900_cfgpmcsr_register_bits { + PMESTS = 0x00004000, + PME_EN = 0x00000100, // Power management enable + PWR_STA = 0x00000003 // Current power state +}; + +/* Wake-on-LAN support. */ +enum sis900_power_management_control_register_bits { + LINKLOSS = 0x00000001, + LINKON = 0x00000002, + MAGICPKT = 0x00000400, + ALGORITHM = 0x00000800, + FRM1EN = 0x00100000, + FRM2EN = 0x00200000, + FRM3EN = 0x00400000, + FRM1ACS = 0x01000000, + FRM2ACS = 0x02000000, + FRM3ACS = 0x04000000, + WAKEALL = 0x40000000, + GATECLK = 0x80000000 +}; + +/* Management Data I/O (mdio) frame */ +#define MIIread 0x6000 +#define MIIwrite 0x5002 +#define MIIpmdShift 7 +#define MIIregShift 2 +#define MIIcmdLen 16 +#define MIIcmdShift 16 + +/* Buffer Descriptor Status*/ +enum sis900_buffer_status { + OWN = 0x80000000, MORE = 0x40000000, INTR = 0x20000000, + SUPCRC = 0x10000000, INCCRC = 0x10000000, + OK = 0x08000000, DSIZE = 0x00000FFF +}; +/* Status for TX Buffers */ +enum sis900_tx_buffer_status { + ABORT = 0x04000000, UNDERRUN = 0x02000000, NOCARRIER = 0x01000000, + DEFERD = 0x00800000, EXCDEFER = 0x00400000, OWCOLL = 0x00200000, + EXCCOLL = 0x00100000, COLCNT = 0x000F0000 +}; + +enum sis900_rx_bufer_status { + OVERRUN = 0x02000000, DEST = 0x00800000, BCAST = 0x01800000, + MCAST = 0x01000000, UNIMATCH = 0x00800000, TOOLONG = 0x00400000, + RUNT = 0x00200000, RXISERR = 0x00100000, CRCERR = 0x00080000, + FAERR = 0x00040000, LOOPBK = 0x00020000, RXCOL = 0x00010000 +}; + +/* MII register offsets */ +enum mii_registers { + MII_CONTROL = 0x0000, MII_STATUS = 0x0001, MII_PHY_ID0 = 0x0002, + MII_PHY_ID1 = 0x0003, MII_ANADV = 0x0004, MII_ANLPAR = 0x0005, + MII_ANEXT = 0x0006 +}; + +/* mii registers specific to SiS 900 */ +enum sis_mii_registers { + MII_CONFIG1 = 0x0010, MII_CONFIG2 = 0x0011, MII_STSOUT = 0x0012, + MII_MASK = 0x0013, MII_RESV = 0x0014 +}; + +/* mii registers specific to ICS 1893 */ +enum ics_mii_registers { + MII_EXTCTRL = 0x0010, MII_QPDSTS = 0x0011, MII_10BTOP = 0x0012, + MII_EXTCTRL2 = 0x0013 +}; + +/* mii registers specific to AMD 79C901 */ +enum amd_mii_registers { + MII_STATUS_SUMMARY = 0x0018 +}; + +/* MII Control register bit definitions. */ +enum mii_control_register_bits { + MII_CNTL_FDX = 0x0100, MII_CNTL_RST_AUTO = 0x0200, + MII_CNTL_ISOLATE = 0x0400, MII_CNTL_PWRDWN = 0x0800, + MII_CNTL_AUTO = 0x1000, MII_CNTL_SPEED = 0x2000, + MII_CNTL_LPBK = 0x4000, MII_CNTL_RESET = 0x8000 +}; + +/* MII Status register bit */ +enum mii_status_register_bits { + MII_STAT_EXT = 0x0001, MII_STAT_JAB = 0x0002, + MII_STAT_LINK = 0x0004, MII_STAT_CAN_AUTO = 0x0008, + MII_STAT_FAULT = 0x0010, MII_STAT_AUTO_DONE = 0x0020, + MII_STAT_CAN_T = 0x0800, MII_STAT_CAN_T_FDX = 0x1000, + MII_STAT_CAN_TX = 0x2000, MII_STAT_CAN_TX_FDX = 0x4000, + MII_STAT_CAN_T4 = 0x8000 +}; + +#define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */ +#define MII_ID1_MODEL 0x03F0 /* model number */ +#define MII_ID1_REV 0x000F /* model number */ + +/* MII NWAY Register Bits ... + valid for the ANAR (Auto-Negotiation Advertisement) and + ANLPAR (Auto-Negotiation Link Partner) registers */ +enum mii_nway_register_bits { + MII_NWAY_NODE_SEL = 0x001f, MII_NWAY_CSMA_CD = 0x0001, + MII_NWAY_T = 0x0020, MII_NWAY_T_FDX = 0x0040, + MII_NWAY_TX = 0x0080, MII_NWAY_TX_FDX = 0x0100, + MII_NWAY_T4 = 0x0200, MII_NWAY_PAUSE = 0x0400, + MII_NWAY_RF = 0x2000, MII_NWAY_ACK = 0x4000, + MII_NWAY_NP = 0x8000 +}; + +enum mii_stsout_register_bits { + MII_STSOUT_LINK_FAIL = 0x4000, + MII_STSOUT_SPD = 0x0080, MII_STSOUT_DPLX = 0x0040 +}; + +enum mii_stsics_register_bits { + MII_STSICS_SPD = 0x8000, MII_STSICS_DPLX = 0x4000, + MII_STSICS_LINKSTS = 0x0001 +}; + +enum mii_stssum_register_bits { + MII_STSSUM_LINK = 0x0008, MII_STSSUM_DPLX = 0x0004, + MII_STSSUM_AUTO = 0x0002, MII_STSSUM_SPD = 0x0001 +}; + +enum sis900_revision_id { + SIS630A_900_REV = 0x80, SIS630E_900_REV = 0x81, + SIS630S_900_REV = 0x82, SIS630EA1_900_REV = 0x83, + SIS630ET_900_REV = 0x84, SIS635A_900_REV = 0x90, + SIS96x_900_REV = 0X91, SIS900B_900_REV = 0x03 +}; + +enum sis630_revision_id { + SIS630A0 = 0x00, SIS630A1 = 0x01, + SIS630B0 = 0x10, SIS630B1 = 0x11 +}; + +#define FDX_CAPABLE_DUPLEX_UNKNOWN 0 +#define FDX_CAPABLE_HALF_SELECTED 1 +#define FDX_CAPABLE_FULL_SELECTED 2 + +#define HW_SPEED_UNCONFIG 0 +#define HW_SPEED_HOME 1 +#define HW_SPEED_10_MBPS 10 +#define HW_SPEED_100_MBPS 100 +#define HW_SPEED_DEFAULT (HW_SPEED_100_MBPS) + +#define CRC_SIZE 4 +#define MAC_HEADER_SIZE 14 + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#define MAX_FRAME_SIZE (1518 + 4) +#else +#define MAX_FRAME_SIZE 1518 +#endif /* CONFIG_VLAN_802_1Q */ + +#define TX_BUF_SIZE (MAX_FRAME_SIZE+18) +#define RX_BUF_SIZE (MAX_FRAME_SIZE+18) + +#define NUM_TX_DESC 16 /* Number of Tx descriptor registers. */ +#define NUM_RX_DESC 16 /* Number of Rx descriptor registers. */ +#define TX_TOTAL_SIZE NUM_TX_DESC*sizeof(BufferDesc) +#define RX_TOTAL_SIZE NUM_RX_DESC*sizeof(BufferDesc) + +/* PCI stuff, should be move to pci.h */ +#define SIS630_VENDOR_ID 0x1039 +#define SIS630_DEVICE_ID 0x0630 diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c deleted file mode 100644 index 3c0f1312b391..000000000000 --- a/drivers/net/sis190.c +++ /dev/null @@ -1,1956 +0,0 @@ -/* - sis190.c: Silicon Integrated Systems SiS190 ethernet driver - - Copyright (c) 2003 K.M. Liu - Copyright (c) 2003, 2004 Jeff Garzik - Copyright (c) 2003, 2004, 2005 Francois Romieu - - Based on r8169.c, tg3.c, 8139cp.c, skge.c, epic100.c and SiS 190/191 - genuine driver. - - This software may be used and distributed according to the terms of - the GNU General Public License (GPL), incorporated herein by reference. - Drivers based on or derived from this code fall under the GPL and must - retain the authorship, copyright and license notice. This file is not - a complete program and may only be used when the entire operating - system is licensed under the GPL. - - See the file COPYING in this distribution for more information. - -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define PHY_MAX_ADDR 32 -#define PHY_ID_ANY 0x1f -#define MII_REG_ANY 0x1f - -#define DRV_VERSION "1.4" -#define DRV_NAME "sis190" -#define SIS190_DRIVER_NAME DRV_NAME " Gigabit Ethernet driver " DRV_VERSION - -#define sis190_rx_skb netif_rx -#define sis190_rx_quota(count, quota) count - -#define MAC_ADDR_LEN 6 - -#define NUM_TX_DESC 64 /* [8..1024] */ -#define NUM_RX_DESC 64 /* [8..8192] */ -#define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) -#define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) -#define RX_BUF_SIZE 1536 -#define RX_BUF_MASK 0xfff8 - -#define SIS190_REGS_SIZE 0x80 -#define SIS190_TX_TIMEOUT (6*HZ) -#define SIS190_PHY_TIMEOUT (10*HZ) -#define SIS190_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | \ - NETIF_MSG_LINK | NETIF_MSG_IFUP | \ - NETIF_MSG_IFDOWN) - -/* Enhanced PHY access register bit definitions */ -#define EhnMIIread 0x0000 -#define EhnMIIwrite 0x0020 -#define EhnMIIdataShift 16 -#define EhnMIIpmdShift 6 /* 7016 only */ -#define EhnMIIregShift 11 -#define EhnMIIreq 0x0010 -#define EhnMIInotDone 0x0010 - -/* Write/read MMIO register */ -#define SIS_W8(reg, val) writeb ((val), ioaddr + (reg)) -#define SIS_W16(reg, val) writew ((val), ioaddr + (reg)) -#define SIS_W32(reg, val) writel ((val), ioaddr + (reg)) -#define SIS_R8(reg) readb (ioaddr + (reg)) -#define SIS_R16(reg) readw (ioaddr + (reg)) -#define SIS_R32(reg) readl (ioaddr + (reg)) - -#define SIS_PCI_COMMIT() SIS_R32(IntrControl) - -enum sis190_registers { - TxControl = 0x00, - TxDescStartAddr = 0x04, - rsv0 = 0x08, // reserved - TxSts = 0x0c, // unused (Control/Status) - RxControl = 0x10, - RxDescStartAddr = 0x14, - rsv1 = 0x18, // reserved - RxSts = 0x1c, // unused - IntrStatus = 0x20, - IntrMask = 0x24, - IntrControl = 0x28, - IntrTimer = 0x2c, // unused (Interrupt Timer) - PMControl = 0x30, // unused (Power Mgmt Control/Status) - rsv2 = 0x34, // reserved - ROMControl = 0x38, - ROMInterface = 0x3c, - StationControl = 0x40, - GMIIControl = 0x44, - GIoCR = 0x48, // unused (GMAC IO Compensation) - GIoCtrl = 0x4c, // unused (GMAC IO Control) - TxMacControl = 0x50, - TxLimit = 0x54, // unused (Tx MAC Timer/TryLimit) - RGDelay = 0x58, // unused (RGMII Tx Internal Delay) - rsv3 = 0x5c, // reserved - RxMacControl = 0x60, - RxMacAddr = 0x62, - RxHashTable = 0x68, - // Undocumented = 0x6c, - RxWolCtrl = 0x70, - RxWolData = 0x74, // unused (Rx WOL Data Access) - RxMPSControl = 0x78, // unused (Rx MPS Control) - rsv4 = 0x7c, // reserved -}; - -enum sis190_register_content { - /* IntrStatus */ - SoftInt = 0x40000000, // unused - Timeup = 0x20000000, // unused - PauseFrame = 0x00080000, // unused - MagicPacket = 0x00040000, // unused - WakeupFrame = 0x00020000, // unused - LinkChange = 0x00010000, - RxQEmpty = 0x00000080, - RxQInt = 0x00000040, - TxQ1Empty = 0x00000020, // unused - TxQ1Int = 0x00000010, - TxQ0Empty = 0x00000008, // unused - TxQ0Int = 0x00000004, - RxHalt = 0x00000002, - TxHalt = 0x00000001, - - /* {Rx/Tx}CmdBits */ - CmdReset = 0x10, - CmdRxEnb = 0x08, // unused - CmdTxEnb = 0x01, - RxBufEmpty = 0x01, // unused - - /* Cfg9346Bits */ - Cfg9346_Lock = 0x00, // unused - Cfg9346_Unlock = 0xc0, // unused - - /* RxMacControl */ - AcceptErr = 0x20, // unused - AcceptRunt = 0x10, // unused - AcceptBroadcast = 0x0800, - AcceptMulticast = 0x0400, - AcceptMyPhys = 0x0200, - AcceptAllPhys = 0x0100, - - /* RxConfigBits */ - RxCfgFIFOShift = 13, - RxCfgDMAShift = 8, // 0x1a in RxControl ? - - /* TxConfigBits */ - TxInterFrameGapShift = 24, - TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ - - LinkStatus = 0x02, // unused - FullDup = 0x01, // unused - - /* TBICSRBit */ - TBILinkOK = 0x02000000, // unused -}; - -struct TxDesc { - __le32 PSize; - __le32 status; - __le32 addr; - __le32 size; -}; - -struct RxDesc { - __le32 PSize; - __le32 status; - __le32 addr; - __le32 size; -}; - -enum _DescStatusBit { - /* _Desc.status */ - OWNbit = 0x80000000, // RXOWN/TXOWN - INTbit = 0x40000000, // RXINT/TXINT - CRCbit = 0x00020000, // CRCOFF/CRCEN - PADbit = 0x00010000, // PREADD/PADEN - /* _Desc.size */ - RingEnd = 0x80000000, - /* TxDesc.status */ - LSEN = 0x08000000, // TSO ? -- FR - IPCS = 0x04000000, - TCPCS = 0x02000000, - UDPCS = 0x01000000, - BSTEN = 0x00800000, - EXTEN = 0x00400000, - DEFEN = 0x00200000, - BKFEN = 0x00100000, - CRSEN = 0x00080000, - COLEN = 0x00040000, - THOL3 = 0x30000000, - THOL2 = 0x20000000, - THOL1 = 0x10000000, - THOL0 = 0x00000000, - - WND = 0x00080000, - TABRT = 0x00040000, - FIFO = 0x00020000, - LINK = 0x00010000, - ColCountMask = 0x0000ffff, - /* RxDesc.status */ - IPON = 0x20000000, - TCPON = 0x10000000, - UDPON = 0x08000000, - Wakup = 0x00400000, - Magic = 0x00200000, - Pause = 0x00100000, - DEFbit = 0x00200000, - BCAST = 0x000c0000, - MCAST = 0x00080000, - UCAST = 0x00040000, - /* RxDesc.PSize */ - TAGON = 0x80000000, - RxDescCountMask = 0x7f000000, // multi-desc pkt when > 1 ? -- FR - ABORT = 0x00800000, - SHORT = 0x00400000, - LIMIT = 0x00200000, - MIIER = 0x00100000, - OVRUN = 0x00080000, - NIBON = 0x00040000, - COLON = 0x00020000, - CRCOK = 0x00010000, - RxSizeMask = 0x0000ffff - /* - * The asic could apparently do vlan, TSO, jumbo (sis191 only) and - * provide two (unused with Linux) Tx queues. No publicly - * available documentation alas. - */ -}; - -enum sis190_eeprom_access_register_bits { - EECS = 0x00000001, // unused - EECLK = 0x00000002, // unused - EEDO = 0x00000008, // unused - EEDI = 0x00000004, // unused - EEREQ = 0x00000080, - EEROP = 0x00000200, - EEWOP = 0x00000100 // unused -}; - -/* EEPROM Addresses */ -enum sis190_eeprom_address { - EEPROMSignature = 0x00, - EEPROMCLK = 0x01, // unused - EEPROMInfo = 0x02, - EEPROMMACAddr = 0x03 -}; - -enum sis190_feature { - F_HAS_RGMII = 1, - F_PHY_88E1111 = 2, - F_PHY_BCM5461 = 4 -}; - -struct sis190_private { - void __iomem *mmio_addr; - struct pci_dev *pci_dev; - struct net_device *dev; - spinlock_t lock; - u32 rx_buf_sz; - u32 cur_rx; - u32 cur_tx; - u32 dirty_rx; - u32 dirty_tx; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - struct RxDesc *RxDescRing; - struct TxDesc *TxDescRing; - struct sk_buff *Rx_skbuff[NUM_RX_DESC]; - struct sk_buff *Tx_skbuff[NUM_TX_DESC]; - struct work_struct phy_task; - struct timer_list timer; - u32 msg_enable; - struct mii_if_info mii_if; - struct list_head first_phy; - u32 features; - u32 negotiated_lpa; - enum { - LNK_OFF, - LNK_ON, - LNK_AUTONEG, - } link_status; -}; - -struct sis190_phy { - struct list_head list; - int phy_id; - u16 id[2]; - u16 status; - u8 type; -}; - -enum sis190_phy_type { - UNKNOWN = 0x00, - HOME = 0x01, - LAN = 0x02, - MIX = 0x03 -}; - -static struct mii_chip_info { - const char *name; - u16 id[2]; - unsigned int type; - u32 feature; -} mii_chip_table[] = { - { "Atheros PHY", { 0x004d, 0xd010 }, LAN, 0 }, - { "Atheros PHY AR8012", { 0x004d, 0xd020 }, LAN, 0 }, - { "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN, F_PHY_BCM5461 }, - { "Broadcom PHY AC131", { 0x0143, 0xbc70 }, LAN, 0 }, - { "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN, 0 }, - { "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN, F_PHY_88E1111 }, - { "Realtek PHY RTL8201", { 0x0000, 0x8200 }, LAN, 0 }, - { NULL, } -}; - -static const struct { - const char *name; -} sis_chip_info[] = { - { "SiS 190 PCI Fast Ethernet adapter" }, - { "SiS 191 PCI Gigabit Ethernet adapter" }, -}; - -static DEFINE_PCI_DEVICE_TABLE(sis190_pci_tbl) = { - { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0191), 0, 0, 1 }, - { 0, }, -}; - -MODULE_DEVICE_TABLE(pci, sis190_pci_tbl); - -static int rx_copybreak = 200; - -static struct { - u32 msg_enable; -} debug = { -1 }; - -MODULE_DESCRIPTION("SiS sis190/191 Gigabit Ethernet driver"); -module_param(rx_copybreak, int, 0); -MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); -module_param_named(debug, debug.msg_enable, int, 0); -MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)"); -MODULE_AUTHOR("K.M. Liu , Ueimor "); -MODULE_VERSION(DRV_VERSION); -MODULE_LICENSE("GPL"); - -static const u32 sis190_intr_mask = - RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt | LinkChange; - -/* - * Maximum number of multicast addresses to filter (vs. Rx-all-multicast). - * The chips use a 64 element hash table based on the Ethernet CRC. - */ -static const int multicast_filter_limit = 32; - -static void __mdio_cmd(void __iomem *ioaddr, u32 ctl) -{ - unsigned int i; - - SIS_W32(GMIIControl, ctl); - - msleep(1); - - for (i = 0; i < 100; i++) { - if (!(SIS_R32(GMIIControl) & EhnMIInotDone)) - break; - msleep(1); - } - - if (i > 99) - pr_err("PHY command failed !\n"); -} - -static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val) -{ - __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite | - (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift) | - (((u32) val) << EhnMIIdataShift)); -} - -static int mdio_read(void __iomem *ioaddr, int phy_id, int reg) -{ - __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread | - (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift)); - - return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift); -} - -static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val) -{ - struct sis190_private *tp = netdev_priv(dev); - - mdio_write(tp->mmio_addr, phy_id, reg, val); -} - -static int __mdio_read(struct net_device *dev, int phy_id, int reg) -{ - struct sis190_private *tp = netdev_priv(dev); - - return mdio_read(tp->mmio_addr, phy_id, reg); -} - -static u16 mdio_read_latched(void __iomem *ioaddr, int phy_id, int reg) -{ - mdio_read(ioaddr, phy_id, reg); - return mdio_read(ioaddr, phy_id, reg); -} - -static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg) -{ - u16 data = 0xffff; - unsigned int i; - - if (!(SIS_R32(ROMControl) & 0x0002)) - return 0; - - SIS_W32(ROMInterface, EEREQ | EEROP | (reg << 10)); - - for (i = 0; i < 200; i++) { - if (!(SIS_R32(ROMInterface) & EEREQ)) { - data = (SIS_R32(ROMInterface) & 0xffff0000) >> 16; - break; - } - msleep(1); - } - - return data; -} - -static void sis190_irq_mask_and_ack(void __iomem *ioaddr) -{ - SIS_W32(IntrMask, 0x00); - SIS_W32(IntrStatus, 0xffffffff); - SIS_PCI_COMMIT(); -} - -static void sis190_asic_down(void __iomem *ioaddr) -{ - /* Stop the chip's Tx and Rx DMA processes. */ - - SIS_W32(TxControl, 0x1a00); - SIS_W32(RxControl, 0x1a00); - - sis190_irq_mask_and_ack(ioaddr); -} - -static void sis190_mark_as_last_descriptor(struct RxDesc *desc) -{ - desc->size |= cpu_to_le32(RingEnd); -} - -static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz) -{ - u32 eor = le32_to_cpu(desc->size) & RingEnd; - - desc->PSize = 0x0; - desc->size = cpu_to_le32((rx_buf_sz & RX_BUF_MASK) | eor); - wmb(); - desc->status = cpu_to_le32(OWNbit | INTbit); -} - -static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping, - u32 rx_buf_sz) -{ - desc->addr = cpu_to_le32(mapping); - sis190_give_to_asic(desc, rx_buf_sz); -} - -static inline void sis190_make_unusable_by_asic(struct RxDesc *desc) -{ - desc->PSize = 0x0; - desc->addr = cpu_to_le32(0xdeadbeef); - desc->size &= cpu_to_le32(RingEnd); - wmb(); - desc->status = 0x0; -} - -static struct sk_buff *sis190_alloc_rx_skb(struct sis190_private *tp, - struct RxDesc *desc) -{ - u32 rx_buf_sz = tp->rx_buf_sz; - struct sk_buff *skb; - dma_addr_t mapping; - - skb = netdev_alloc_skb(tp->dev, rx_buf_sz); - if (unlikely(!skb)) - goto skb_alloc_failed; - mapping = pci_map_single(tp->pci_dev, skb->data, tp->rx_buf_sz, - PCI_DMA_FROMDEVICE); - if (pci_dma_mapping_error(tp->pci_dev, mapping)) - goto out; - sis190_map_to_asic(desc, mapping, rx_buf_sz); - - return skb; - -out: - dev_kfree_skb_any(skb); -skb_alloc_failed: - sis190_make_unusable_by_asic(desc); - return NULL; -} - -static u32 sis190_rx_fill(struct sis190_private *tp, struct net_device *dev, - u32 start, u32 end) -{ - u32 cur; - - for (cur = start; cur < end; cur++) { - unsigned int i = cur % NUM_RX_DESC; - - if (tp->Rx_skbuff[i]) - continue; - - tp->Rx_skbuff[i] = sis190_alloc_rx_skb(tp, tp->RxDescRing + i); - - if (!tp->Rx_skbuff[i]) - break; - } - return cur - start; -} - -static bool sis190_try_rx_copy(struct sis190_private *tp, - struct sk_buff **sk_buff, int pkt_size, - dma_addr_t addr) -{ - struct sk_buff *skb; - bool done = false; - - if (pkt_size >= rx_copybreak) - goto out; - - skb = netdev_alloc_skb_ip_align(tp->dev, pkt_size); - if (!skb) - goto out; - - pci_dma_sync_single_for_cpu(tp->pci_dev, addr, tp->rx_buf_sz, - PCI_DMA_FROMDEVICE); - skb_copy_to_linear_data(skb, sk_buff[0]->data, pkt_size); - *sk_buff = skb; - done = true; -out: - return done; -} - -static inline int sis190_rx_pkt_err(u32 status, struct net_device_stats *stats) -{ -#define ErrMask (OVRUN | SHORT | LIMIT | MIIER | NIBON | COLON | ABORT) - - if ((status & CRCOK) && !(status & ErrMask)) - return 0; - - if (!(status & CRCOK)) - stats->rx_crc_errors++; - else if (status & OVRUN) - stats->rx_over_errors++; - else if (status & (SHORT | LIMIT)) - stats->rx_length_errors++; - else if (status & (MIIER | NIBON | COLON)) - stats->rx_frame_errors++; - - stats->rx_errors++; - return -1; -} - -static int sis190_rx_interrupt(struct net_device *dev, - struct sis190_private *tp, void __iomem *ioaddr) -{ - struct net_device_stats *stats = &dev->stats; - u32 rx_left, cur_rx = tp->cur_rx; - u32 delta, count; - - rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; - rx_left = sis190_rx_quota(rx_left, (u32) dev->quota); - - for (; rx_left > 0; rx_left--, cur_rx++) { - unsigned int entry = cur_rx % NUM_RX_DESC; - struct RxDesc *desc = tp->RxDescRing + entry; - u32 status; - - if (le32_to_cpu(desc->status) & OWNbit) - break; - - status = le32_to_cpu(desc->PSize); - - //netif_info(tp, intr, dev, "Rx PSize = %08x\n", status); - - if (sis190_rx_pkt_err(status, stats) < 0) - sis190_give_to_asic(desc, tp->rx_buf_sz); - else { - struct sk_buff *skb = tp->Rx_skbuff[entry]; - dma_addr_t addr = le32_to_cpu(desc->addr); - int pkt_size = (status & RxSizeMask) - 4; - struct pci_dev *pdev = tp->pci_dev; - - if (unlikely(pkt_size > tp->rx_buf_sz)) { - netif_info(tp, intr, dev, - "(frag) status = %08x\n", status); - stats->rx_dropped++; - stats->rx_length_errors++; - sis190_give_to_asic(desc, tp->rx_buf_sz); - continue; - } - - - if (sis190_try_rx_copy(tp, &skb, pkt_size, addr)) { - pci_dma_sync_single_for_device(pdev, addr, - tp->rx_buf_sz, PCI_DMA_FROMDEVICE); - sis190_give_to_asic(desc, tp->rx_buf_sz); - } else { - pci_unmap_single(pdev, addr, tp->rx_buf_sz, - PCI_DMA_FROMDEVICE); - tp->Rx_skbuff[entry] = NULL; - sis190_make_unusable_by_asic(desc); - } - - skb_put(skb, pkt_size); - skb->protocol = eth_type_trans(skb, dev); - - sis190_rx_skb(skb); - - stats->rx_packets++; - stats->rx_bytes += pkt_size; - if ((status & BCAST) == MCAST) - stats->multicast++; - } - } - count = cur_rx - tp->cur_rx; - tp->cur_rx = cur_rx; - - delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx); - if (!delta && count) - netif_info(tp, intr, dev, "no Rx buffer allocated\n"); - tp->dirty_rx += delta; - - if ((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) - netif_emerg(tp, intr, dev, "Rx buffers exhausted\n"); - - return count; -} - -static void sis190_unmap_tx_skb(struct pci_dev *pdev, struct sk_buff *skb, - struct TxDesc *desc) -{ - unsigned int len; - - len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; - - pci_unmap_single(pdev, le32_to_cpu(desc->addr), len, PCI_DMA_TODEVICE); - - memset(desc, 0x00, sizeof(*desc)); -} - -static inline int sis190_tx_pkt_err(u32 status, struct net_device_stats *stats) -{ -#define TxErrMask (WND | TABRT | FIFO | LINK) - - if (!unlikely(status & TxErrMask)) - return 0; - - if (status & WND) - stats->tx_window_errors++; - if (status & TABRT) - stats->tx_aborted_errors++; - if (status & FIFO) - stats->tx_fifo_errors++; - if (status & LINK) - stats->tx_carrier_errors++; - - stats->tx_errors++; - - return -1; -} - -static void sis190_tx_interrupt(struct net_device *dev, - struct sis190_private *tp, void __iomem *ioaddr) -{ - struct net_device_stats *stats = &dev->stats; - u32 pending, dirty_tx = tp->dirty_tx; - /* - * It would not be needed if queueing was allowed to be enabled - * again too early (hint: think preempt and unclocked smp systems). - */ - unsigned int queue_stopped; - - smp_rmb(); - pending = tp->cur_tx - dirty_tx; - queue_stopped = (pending == NUM_TX_DESC); - - for (; pending; pending--, dirty_tx++) { - unsigned int entry = dirty_tx % NUM_TX_DESC; - struct TxDesc *txd = tp->TxDescRing + entry; - u32 status = le32_to_cpu(txd->status); - struct sk_buff *skb; - - if (status & OWNbit) - break; - - skb = tp->Tx_skbuff[entry]; - - if (likely(sis190_tx_pkt_err(status, stats) == 0)) { - stats->tx_packets++; - stats->tx_bytes += skb->len; - stats->collisions += ((status & ColCountMask) - 1); - } - - sis190_unmap_tx_skb(tp->pci_dev, skb, txd); - tp->Tx_skbuff[entry] = NULL; - dev_kfree_skb_irq(skb); - } - - if (tp->dirty_tx != dirty_tx) { - tp->dirty_tx = dirty_tx; - smp_wmb(); - if (queue_stopped) - netif_wake_queue(dev); - } -} - -/* - * The interrupt handler does all of the Rx thread work and cleans up after - * the Tx thread. - */ -static irqreturn_t sis190_interrupt(int irq, void *__dev) -{ - struct net_device *dev = __dev; - struct sis190_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - unsigned int handled = 0; - u32 status; - - status = SIS_R32(IntrStatus); - - if ((status == 0xffffffff) || !status) - goto out; - - handled = 1; - - if (unlikely(!netif_running(dev))) { - sis190_asic_down(ioaddr); - goto out; - } - - SIS_W32(IntrStatus, status); - -// netif_info(tp, intr, dev, "status = %08x\n", status); - - if (status & LinkChange) { - netif_info(tp, intr, dev, "link change\n"); - del_timer(&tp->timer); - schedule_work(&tp->phy_task); - } - - if (status & RxQInt) - sis190_rx_interrupt(dev, tp, ioaddr); - - if (status & TxQ0Int) - sis190_tx_interrupt(dev, tp, ioaddr); -out: - return IRQ_RETVAL(handled); -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -static void sis190_netpoll(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - struct pci_dev *pdev = tp->pci_dev; - - disable_irq(pdev->irq); - sis190_interrupt(pdev->irq, dev); - enable_irq(pdev->irq); -} -#endif - -static void sis190_free_rx_skb(struct sis190_private *tp, - struct sk_buff **sk_buff, struct RxDesc *desc) -{ - struct pci_dev *pdev = tp->pci_dev; - - pci_unmap_single(pdev, le32_to_cpu(desc->addr), tp->rx_buf_sz, - PCI_DMA_FROMDEVICE); - dev_kfree_skb(*sk_buff); - *sk_buff = NULL; - sis190_make_unusable_by_asic(desc); -} - -static void sis190_rx_clear(struct sis190_private *tp) -{ - unsigned int i; - - for (i = 0; i < NUM_RX_DESC; i++) { - if (!tp->Rx_skbuff[i]) - continue; - sis190_free_rx_skb(tp, tp->Rx_skbuff + i, tp->RxDescRing + i); - } -} - -static void sis190_init_ring_indexes(struct sis190_private *tp) -{ - tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0; -} - -static int sis190_init_ring(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - - sis190_init_ring_indexes(tp); - - memset(tp->Tx_skbuff, 0x0, NUM_TX_DESC * sizeof(struct sk_buff *)); - memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *)); - - if (sis190_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC) - goto err_rx_clear; - - sis190_mark_as_last_descriptor(tp->RxDescRing + NUM_RX_DESC - 1); - - return 0; - -err_rx_clear: - sis190_rx_clear(tp); - return -ENOMEM; -} - -static void sis190_set_rx_mode(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - unsigned long flags; - u32 mc_filter[2]; /* Multicast hash filter */ - u16 rx_mode; - - if (dev->flags & IFF_PROMISC) { - rx_mode = - AcceptBroadcast | AcceptMulticast | AcceptMyPhys | - AcceptAllPhys; - mc_filter[1] = mc_filter[0] = 0xffffffff; - } else if ((netdev_mc_count(dev) > multicast_filter_limit) || - (dev->flags & IFF_ALLMULTI)) { - /* Too many to filter perfectly -- accept all multicasts. */ - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; - mc_filter[1] = mc_filter[0] = 0xffffffff; - } else { - struct netdev_hw_addr *ha; - - rx_mode = AcceptBroadcast | AcceptMyPhys; - mc_filter[1] = mc_filter[0] = 0; - netdev_for_each_mc_addr(ha, dev) { - int bit_nr = - ether_crc(ETH_ALEN, ha->addr) & 0x3f; - mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); - rx_mode |= AcceptMulticast; - } - } - - spin_lock_irqsave(&tp->lock, flags); - - SIS_W16(RxMacControl, rx_mode | 0x2); - SIS_W32(RxHashTable, mc_filter[0]); - SIS_W32(RxHashTable + 4, mc_filter[1]); - - spin_unlock_irqrestore(&tp->lock, flags); -} - -static void sis190_soft_reset(void __iomem *ioaddr) -{ - SIS_W32(IntrControl, 0x8000); - SIS_PCI_COMMIT(); - SIS_W32(IntrControl, 0x0); - sis190_asic_down(ioaddr); -} - -static void sis190_hw_start(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - - sis190_soft_reset(ioaddr); - - SIS_W32(TxDescStartAddr, tp->tx_dma); - SIS_W32(RxDescStartAddr, tp->rx_dma); - - SIS_W32(IntrStatus, 0xffffffff); - SIS_W32(IntrMask, 0x0); - SIS_W32(GMIIControl, 0x0); - SIS_W32(TxMacControl, 0x60); - SIS_W16(RxMacControl, 0x02); - SIS_W32(RxHashTable, 0x0); - SIS_W32(0x6c, 0x0); - SIS_W32(RxWolCtrl, 0x0); - SIS_W32(RxWolData, 0x0); - - SIS_PCI_COMMIT(); - - sis190_set_rx_mode(dev); - - /* Enable all known interrupts by setting the interrupt mask. */ - SIS_W32(IntrMask, sis190_intr_mask); - - SIS_W32(TxControl, 0x1a00 | CmdTxEnb); - SIS_W32(RxControl, 0x1a1d); - - netif_start_queue(dev); -} - -static void sis190_phy_task(struct work_struct *work) -{ - struct sis190_private *tp = - container_of(work, struct sis190_private, phy_task); - struct net_device *dev = tp->dev; - void __iomem *ioaddr = tp->mmio_addr; - int phy_id = tp->mii_if.phy_id; - u16 val; - - rtnl_lock(); - - if (!netif_running(dev)) - goto out_unlock; - - val = mdio_read(ioaddr, phy_id, MII_BMCR); - if (val & BMCR_RESET) { - // FIXME: needlessly high ? -- FR 02/07/2005 - mod_timer(&tp->timer, jiffies + HZ/10); - goto out_unlock; - } - - val = mdio_read_latched(ioaddr, phy_id, MII_BMSR); - if (!(val & BMSR_ANEGCOMPLETE) && tp->link_status != LNK_AUTONEG) { - netif_carrier_off(dev); - netif_warn(tp, link, dev, "auto-negotiating...\n"); - tp->link_status = LNK_AUTONEG; - } else if ((val & BMSR_LSTATUS) && tp->link_status != LNK_ON) { - /* Rejoice ! */ - struct { - int val; - u32 ctl; - const char *msg; - } reg31[] = { - { LPA_1000FULL, 0x07000c00 | 0x00001000, - "1000 Mbps Full Duplex" }, - { LPA_1000HALF, 0x07000c00, - "1000 Mbps Half Duplex" }, - { LPA_100FULL, 0x04000800 | 0x00001000, - "100 Mbps Full Duplex" }, - { LPA_100HALF, 0x04000800, - "100 Mbps Half Duplex" }, - { LPA_10FULL, 0x04000400 | 0x00001000, - "10 Mbps Full Duplex" }, - { LPA_10HALF, 0x04000400, - "10 Mbps Half Duplex" }, - { 0, 0x04000400, "unknown" } - }, *p = NULL; - u16 adv, autoexp, gigadv, gigrec; - - val = mdio_read(ioaddr, phy_id, 0x1f); - netif_info(tp, link, dev, "mii ext = %04x\n", val); - - val = mdio_read(ioaddr, phy_id, MII_LPA); - adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE); - autoexp = mdio_read(ioaddr, phy_id, MII_EXPANSION); - netif_info(tp, link, dev, "mii lpa=%04x adv=%04x exp=%04x\n", - val, adv, autoexp); - - if (val & LPA_NPAGE && autoexp & EXPANSION_NWAY) { - /* check for gigabit speed */ - gigadv = mdio_read(ioaddr, phy_id, MII_CTRL1000); - gigrec = mdio_read(ioaddr, phy_id, MII_STAT1000); - val = (gigadv & (gigrec >> 2)); - if (val & ADVERTISE_1000FULL) - p = reg31; - else if (val & ADVERTISE_1000HALF) - p = reg31 + 1; - } - if (!p) { - val &= adv; - - for (p = reg31; p->val; p++) { - if ((val & p->val) == p->val) - break; - } - } - - p->ctl |= SIS_R32(StationControl) & ~0x0f001c00; - - if ((tp->features & F_HAS_RGMII) && - (tp->features & F_PHY_BCM5461)) { - // Set Tx Delay in RGMII mode. - mdio_write(ioaddr, phy_id, 0x18, 0xf1c7); - udelay(200); - mdio_write(ioaddr, phy_id, 0x1c, 0x8c00); - p->ctl |= 0x03000000; - } - - SIS_W32(StationControl, p->ctl); - - if (tp->features & F_HAS_RGMII) { - SIS_W32(RGDelay, 0x0441); - SIS_W32(RGDelay, 0x0440); - } - - tp->negotiated_lpa = p->val; - - netif_info(tp, link, dev, "link on %s mode\n", p->msg); - netif_carrier_on(dev); - tp->link_status = LNK_ON; - } else if (!(val & BMSR_LSTATUS) && tp->link_status != LNK_AUTONEG) - tp->link_status = LNK_OFF; - mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT); - -out_unlock: - rtnl_unlock(); -} - -static void sis190_phy_timer(unsigned long __opaque) -{ - struct net_device *dev = (struct net_device *)__opaque; - struct sis190_private *tp = netdev_priv(dev); - - if (likely(netif_running(dev))) - schedule_work(&tp->phy_task); -} - -static inline void sis190_delete_timer(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - - del_timer_sync(&tp->timer); -} - -static inline void sis190_request_timer(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - struct timer_list *timer = &tp->timer; - - init_timer(timer); - timer->expires = jiffies + SIS190_PHY_TIMEOUT; - timer->data = (unsigned long)dev; - timer->function = sis190_phy_timer; - add_timer(timer); -} - -static void sis190_set_rxbufsize(struct sis190_private *tp, - struct net_device *dev) -{ - unsigned int mtu = dev->mtu; - - tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; - /* RxDesc->size has a licence to kill the lower bits */ - if (tp->rx_buf_sz & 0x07) { - tp->rx_buf_sz += 8; - tp->rx_buf_sz &= RX_BUF_MASK; - } -} - -static int sis190_open(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - struct pci_dev *pdev = tp->pci_dev; - int rc = -ENOMEM; - - sis190_set_rxbufsize(tp, dev); - - /* - * Rx and Tx descriptors need 256 bytes alignment. - * pci_alloc_consistent() guarantees a stronger alignment. - */ - tp->TxDescRing = pci_alloc_consistent(pdev, TX_RING_BYTES, &tp->tx_dma); - if (!tp->TxDescRing) - goto out; - - tp->RxDescRing = pci_alloc_consistent(pdev, RX_RING_BYTES, &tp->rx_dma); - if (!tp->RxDescRing) - goto err_free_tx_0; - - rc = sis190_init_ring(dev); - if (rc < 0) - goto err_free_rx_1; - - sis190_request_timer(dev); - - rc = request_irq(dev->irq, sis190_interrupt, IRQF_SHARED, dev->name, dev); - if (rc < 0) - goto err_release_timer_2; - - sis190_hw_start(dev); -out: - return rc; - -err_release_timer_2: - sis190_delete_timer(dev); - sis190_rx_clear(tp); -err_free_rx_1: - pci_free_consistent(tp->pci_dev, RX_RING_BYTES, tp->RxDescRing, - tp->rx_dma); -err_free_tx_0: - pci_free_consistent(tp->pci_dev, TX_RING_BYTES, tp->TxDescRing, - tp->tx_dma); - goto out; -} - -static void sis190_tx_clear(struct sis190_private *tp) -{ - unsigned int i; - - for (i = 0; i < NUM_TX_DESC; i++) { - struct sk_buff *skb = tp->Tx_skbuff[i]; - - if (!skb) - continue; - - sis190_unmap_tx_skb(tp->pci_dev, skb, tp->TxDescRing + i); - tp->Tx_skbuff[i] = NULL; - dev_kfree_skb(skb); - - tp->dev->stats.tx_dropped++; - } - tp->cur_tx = tp->dirty_tx = 0; -} - -static void sis190_down(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - unsigned int poll_locked = 0; - - sis190_delete_timer(dev); - - netif_stop_queue(dev); - - do { - spin_lock_irq(&tp->lock); - - sis190_asic_down(ioaddr); - - spin_unlock_irq(&tp->lock); - - synchronize_irq(dev->irq); - - if (!poll_locked) - poll_locked++; - - synchronize_sched(); - - } while (SIS_R32(IntrMask)); - - sis190_tx_clear(tp); - sis190_rx_clear(tp); -} - -static int sis190_close(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - struct pci_dev *pdev = tp->pci_dev; - - sis190_down(dev); - - free_irq(dev->irq, dev); - - pci_free_consistent(pdev, TX_RING_BYTES, tp->TxDescRing, tp->tx_dma); - pci_free_consistent(pdev, RX_RING_BYTES, tp->RxDescRing, tp->rx_dma); - - tp->TxDescRing = NULL; - tp->RxDescRing = NULL; - - return 0; -} - -static netdev_tx_t sis190_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - u32 len, entry, dirty_tx; - struct TxDesc *desc; - dma_addr_t mapping; - - if (unlikely(skb->len < ETH_ZLEN)) { - if (skb_padto(skb, ETH_ZLEN)) { - dev->stats.tx_dropped++; - goto out; - } - len = ETH_ZLEN; - } else { - len = skb->len; - } - - entry = tp->cur_tx % NUM_TX_DESC; - desc = tp->TxDescRing + entry; - - if (unlikely(le32_to_cpu(desc->status) & OWNbit)) { - netif_stop_queue(dev); - netif_err(tp, tx_err, dev, - "BUG! Tx Ring full when queue awake!\n"); - return NETDEV_TX_BUSY; - } - - mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE); - if (pci_dma_mapping_error(tp->pci_dev, mapping)) { - netif_err(tp, tx_err, dev, - "PCI mapping failed, dropping packet"); - return NETDEV_TX_BUSY; - } - - tp->Tx_skbuff[entry] = skb; - - desc->PSize = cpu_to_le32(len); - desc->addr = cpu_to_le32(mapping); - - desc->size = cpu_to_le32(len); - if (entry == (NUM_TX_DESC - 1)) - desc->size |= cpu_to_le32(RingEnd); - - wmb(); - - desc->status = cpu_to_le32(OWNbit | INTbit | DEFbit | CRCbit | PADbit); - if (tp->negotiated_lpa & (LPA_1000HALF | LPA_100HALF | LPA_10HALF)) { - /* Half Duplex */ - desc->status |= cpu_to_le32(COLEN | CRSEN | BKFEN); - if (tp->negotiated_lpa & (LPA_1000HALF | LPA_1000FULL)) - desc->status |= cpu_to_le32(EXTEN | BSTEN); /* gigabit HD */ - } - - tp->cur_tx++; - - smp_wmb(); - - SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb); - - dirty_tx = tp->dirty_tx; - if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) { - netif_stop_queue(dev); - smp_rmb(); - if (dirty_tx != tp->dirty_tx) - netif_wake_queue(dev); - } -out: - return NETDEV_TX_OK; -} - -static void sis190_free_phy(struct list_head *first_phy) -{ - struct sis190_phy *cur, *next; - - list_for_each_entry_safe(cur, next, first_phy, list) { - kfree(cur); - } -} - -/** - * sis190_default_phy - Select default PHY for sis190 mac. - * @dev: the net device to probe for - * - * Select first detected PHY with link as default. - * If no one is link on, select PHY whose types is HOME as default. - * If HOME doesn't exist, select LAN. - */ -static u16 sis190_default_phy(struct net_device *dev) -{ - struct sis190_phy *phy, *phy_home, *phy_default, *phy_lan; - struct sis190_private *tp = netdev_priv(dev); - struct mii_if_info *mii_if = &tp->mii_if; - void __iomem *ioaddr = tp->mmio_addr; - u16 status; - - phy_home = phy_default = phy_lan = NULL; - - list_for_each_entry(phy, &tp->first_phy, list) { - status = mdio_read_latched(ioaddr, phy->phy_id, MII_BMSR); - - // Link ON & Not select default PHY & not ghost PHY. - if ((status & BMSR_LSTATUS) && - !phy_default && - (phy->type != UNKNOWN)) { - phy_default = phy; - } else { - status = mdio_read(ioaddr, phy->phy_id, MII_BMCR); - mdio_write(ioaddr, phy->phy_id, MII_BMCR, - status | BMCR_ANENABLE | BMCR_ISOLATE); - if (phy->type == HOME) - phy_home = phy; - else if (phy->type == LAN) - phy_lan = phy; - } - } - - if (!phy_default) { - if (phy_home) - phy_default = phy_home; - else if (phy_lan) - phy_default = phy_lan; - else - phy_default = list_first_entry(&tp->first_phy, - struct sis190_phy, list); - } - - if (mii_if->phy_id != phy_default->phy_id) { - mii_if->phy_id = phy_default->phy_id; - if (netif_msg_probe(tp)) - pr_info("%s: Using transceiver at address %d as default\n", - pci_name(tp->pci_dev), mii_if->phy_id); - } - - status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR); - status &= (~BMCR_ISOLATE); - - mdio_write(ioaddr, mii_if->phy_id, MII_BMCR, status); - status = mdio_read_latched(ioaddr, mii_if->phy_id, MII_BMSR); - - return status; -} - -static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp, - struct sis190_phy *phy, unsigned int phy_id, - u16 mii_status) -{ - void __iomem *ioaddr = tp->mmio_addr; - struct mii_chip_info *p; - - INIT_LIST_HEAD(&phy->list); - phy->status = mii_status; - phy->phy_id = phy_id; - - phy->id[0] = mdio_read(ioaddr, phy_id, MII_PHYSID1); - phy->id[1] = mdio_read(ioaddr, phy_id, MII_PHYSID2); - - for (p = mii_chip_table; p->type; p++) { - if ((p->id[0] == phy->id[0]) && - (p->id[1] == (phy->id[1] & 0xfff0))) { - break; - } - } - - if (p->id[1]) { - phy->type = (p->type == MIX) ? - ((mii_status & (BMSR_100FULL | BMSR_100HALF)) ? - LAN : HOME) : p->type; - tp->features |= p->feature; - if (netif_msg_probe(tp)) - pr_info("%s: %s transceiver at address %d\n", - pci_name(tp->pci_dev), p->name, phy_id); - } else { - phy->type = UNKNOWN; - if (netif_msg_probe(tp)) - pr_info("%s: unknown PHY 0x%x:0x%x transceiver at address %d\n", - pci_name(tp->pci_dev), - phy->id[0], (phy->id[1] & 0xfff0), phy_id); - } -} - -static void sis190_mii_probe_88e1111_fixup(struct sis190_private *tp) -{ - if (tp->features & F_PHY_88E1111) { - void __iomem *ioaddr = tp->mmio_addr; - int phy_id = tp->mii_if.phy_id; - u16 reg[2][2] = { - { 0x808b, 0x0ce1 }, - { 0x808f, 0x0c60 } - }, *p; - - p = (tp->features & F_HAS_RGMII) ? reg[0] : reg[1]; - - mdio_write(ioaddr, phy_id, 0x1b, p[0]); - udelay(200); - mdio_write(ioaddr, phy_id, 0x14, p[1]); - udelay(200); - } -} - -/** - * sis190_mii_probe - Probe MII PHY for sis190 - * @dev: the net device to probe for - * - * Search for total of 32 possible mii phy addresses. - * Identify and set current phy if found one, - * return error if it failed to found. - */ -static int __devinit sis190_mii_probe(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - struct mii_if_info *mii_if = &tp->mii_if; - void __iomem *ioaddr = tp->mmio_addr; - int phy_id; - int rc = 0; - - INIT_LIST_HEAD(&tp->first_phy); - - for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { - struct sis190_phy *phy; - u16 status; - - status = mdio_read_latched(ioaddr, phy_id, MII_BMSR); - - // Try next mii if the current one is not accessible. - if (status == 0xffff || status == 0x0000) - continue; - - phy = kmalloc(sizeof(*phy), GFP_KERNEL); - if (!phy) { - sis190_free_phy(&tp->first_phy); - rc = -ENOMEM; - goto out; - } - - sis190_init_phy(dev, tp, phy, phy_id, status); - - list_add(&tp->first_phy, &phy->list); - } - - if (list_empty(&tp->first_phy)) { - if (netif_msg_probe(tp)) - pr_info("%s: No MII transceivers found!\n", - pci_name(tp->pci_dev)); - rc = -EIO; - goto out; - } - - /* Select default PHY for mac */ - sis190_default_phy(dev); - - sis190_mii_probe_88e1111_fixup(tp); - - mii_if->dev = dev; - mii_if->mdio_read = __mdio_read; - mii_if->mdio_write = __mdio_write; - mii_if->phy_id_mask = PHY_ID_ANY; - mii_if->reg_num_mask = MII_REG_ANY; -out: - return rc; -} - -static void sis190_mii_remove(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - - sis190_free_phy(&tp->first_phy); -} - -static void sis190_release_board(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct sis190_private *tp = netdev_priv(dev); - - iounmap(tp->mmio_addr); - pci_release_regions(pdev); - pci_disable_device(pdev); - free_netdev(dev); -} - -static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) -{ - struct sis190_private *tp; - struct net_device *dev; - void __iomem *ioaddr; - int rc; - - dev = alloc_etherdev(sizeof(*tp)); - if (!dev) { - if (netif_msg_drv(&debug)) - pr_err("unable to alloc new ethernet\n"); - rc = -ENOMEM; - goto err_out_0; - } - - SET_NETDEV_DEV(dev, &pdev->dev); - - tp = netdev_priv(dev); - tp->dev = dev; - tp->msg_enable = netif_msg_init(debug.msg_enable, SIS190_MSG_DEFAULT); - - rc = pci_enable_device(pdev); - if (rc < 0) { - if (netif_msg_probe(tp)) - pr_err("%s: enable failure\n", pci_name(pdev)); - goto err_free_dev_1; - } - - rc = -ENODEV; - - if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - if (netif_msg_probe(tp)) - pr_err("%s: region #0 is no MMIO resource\n", - pci_name(pdev)); - goto err_pci_disable_2; - } - if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) { - if (netif_msg_probe(tp)) - pr_err("%s: invalid PCI region size(s)\n", - pci_name(pdev)); - goto err_pci_disable_2; - } - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc < 0) { - if (netif_msg_probe(tp)) - pr_err("%s: could not request regions\n", - pci_name(pdev)); - goto err_pci_disable_2; - } - - rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (rc < 0) { - if (netif_msg_probe(tp)) - pr_err("%s: DMA configuration failed\n", - pci_name(pdev)); - goto err_free_res_3; - } - - pci_set_master(pdev); - - ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE); - if (!ioaddr) { - if (netif_msg_probe(tp)) - pr_err("%s: cannot remap MMIO, aborting\n", - pci_name(pdev)); - rc = -EIO; - goto err_free_res_3; - } - - tp->pci_dev = pdev; - tp->mmio_addr = ioaddr; - tp->link_status = LNK_OFF; - - sis190_irq_mask_and_ack(ioaddr); - - sis190_soft_reset(ioaddr); -out: - return dev; - -err_free_res_3: - pci_release_regions(pdev); -err_pci_disable_2: - pci_disable_device(pdev); -err_free_dev_1: - free_netdev(dev); -err_out_0: - dev = ERR_PTR(rc); - goto out; -} - -static void sis190_tx_timeout(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - u8 tmp8; - - /* Disable Tx, if not already */ - tmp8 = SIS_R8(TxControl); - if (tmp8 & CmdTxEnb) - SIS_W8(TxControl, tmp8 & ~CmdTxEnb); - - netif_info(tp, tx_err, dev, "Transmit timeout, status %08x %08x\n", - SIS_R32(TxControl), SIS_R32(TxSts)); - - /* Disable interrupts by clearing the interrupt mask. */ - SIS_W32(IntrMask, 0x0000); - - /* Stop a shared interrupt from scavenging while we are. */ - spin_lock_irq(&tp->lock); - sis190_tx_clear(tp); - spin_unlock_irq(&tp->lock); - - /* ...and finally, reset everything. */ - sis190_hw_start(dev); - - netif_wake_queue(dev); -} - -static void sis190_set_rgmii(struct sis190_private *tp, u8 reg) -{ - tp->features |= (reg & 0x80) ? F_HAS_RGMII : 0; -} - -static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev, - struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - u16 sig; - int i; - - if (netif_msg_probe(tp)) - pr_info("%s: Read MAC address from EEPROM\n", pci_name(pdev)); - - /* Check to see if there is a sane EEPROM */ - sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature); - - if ((sig == 0xffff) || (sig == 0x0000)) { - if (netif_msg_probe(tp)) - pr_info("%s: Error EEPROM read %x\n", - pci_name(pdev), sig); - return -EIO; - } - - /* Get MAC address from EEPROM */ - for (i = 0; i < MAC_ADDR_LEN / 2; i++) { - u16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); - - ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(w); - } - - sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo)); - - return 0; -} - -/** - * sis190_get_mac_addr_from_apc - Get MAC address for SiS96x model - * @pdev: PCI device - * @dev: network device to get address for - * - * SiS96x model, use APC CMOS RAM to store MAC address. - * APC CMOS RAM is accessed through ISA bridge. - * MAC address is read into @net_dev->dev_addr. - */ -static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev, - struct net_device *dev) -{ - static const u16 __devinitdata ids[] = { 0x0965, 0x0966, 0x0968 }; - struct sis190_private *tp = netdev_priv(dev); - struct pci_dev *isa_bridge; - u8 reg, tmp8; - unsigned int i; - - if (netif_msg_probe(tp)) - pr_info("%s: Read MAC address from APC\n", pci_name(pdev)); - - for (i = 0; i < ARRAY_SIZE(ids); i++) { - isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, ids[i], NULL); - if (isa_bridge) - break; - } - - if (!isa_bridge) { - if (netif_msg_probe(tp)) - pr_info("%s: Can not find ISA bridge\n", - pci_name(pdev)); - return -EIO; - } - - /* Enable port 78h & 79h to access APC Registers. */ - pci_read_config_byte(isa_bridge, 0x48, &tmp8); - reg = (tmp8 & ~0x02); - pci_write_config_byte(isa_bridge, 0x48, reg); - udelay(50); - pci_read_config_byte(isa_bridge, 0x48, ®); - - for (i = 0; i < MAC_ADDR_LEN; i++) { - outb(0x9 + i, 0x78); - dev->dev_addr[i] = inb(0x79); - } - - outb(0x12, 0x78); - reg = inb(0x79); - - sis190_set_rgmii(tp, reg); - - /* Restore the value to ISA Bridge */ - pci_write_config_byte(isa_bridge, 0x48, tmp8); - pci_dev_put(isa_bridge); - - return 0; -} - -/** - * sis190_init_rxfilter - Initialize the Rx filter - * @dev: network device to initialize - * - * Set receive filter address to our MAC address - * and enable packet filtering. - */ -static inline void sis190_init_rxfilter(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - u16 ctl; - int i; - - ctl = SIS_R16(RxMacControl); - /* - * Disable packet filtering before setting filter. - * Note: SiS's driver writes 32 bits but RxMacControl is 16 bits - * only and followed by RxMacAddr (6 bytes). Strange. -- FR - */ - SIS_W16(RxMacControl, ctl & ~0x0f00); - - for (i = 0; i < MAC_ADDR_LEN; i++) - SIS_W8(RxMacAddr + i, dev->dev_addr[i]); - - SIS_W16(RxMacControl, ctl); - SIS_PCI_COMMIT(); -} - -static int __devinit sis190_get_mac_addr(struct pci_dev *pdev, - struct net_device *dev) -{ - int rc; - - rc = sis190_get_mac_addr_from_eeprom(pdev, dev); - if (rc < 0) { - u8 reg; - - pci_read_config_byte(pdev, 0x73, ®); - - if (reg & 0x00000001) - rc = sis190_get_mac_addr_from_apc(pdev, dev); - } - return rc; -} - -static void sis190_set_speed_auto(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - int phy_id = tp->mii_if.phy_id; - int val; - - netif_info(tp, link, dev, "Enabling Auto-negotiation\n"); - - val = mdio_read(ioaddr, phy_id, MII_ADVERTISE); - - // Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0 - // unchanged. - mdio_write(ioaddr, phy_id, MII_ADVERTISE, (val & ADVERTISE_SLCT) | - ADVERTISE_100FULL | ADVERTISE_10FULL | - ADVERTISE_100HALF | ADVERTISE_10HALF); - - // Enable 1000 Full Mode. - mdio_write(ioaddr, phy_id, MII_CTRL1000, ADVERTISE_1000FULL); - - // Enable auto-negotiation and restart auto-negotiation. - mdio_write(ioaddr, phy_id, MII_BMCR, - BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET); -} - -static int sis190_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct sis190_private *tp = netdev_priv(dev); - - return mii_ethtool_gset(&tp->mii_if, cmd); -} - -static int sis190_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct sis190_private *tp = netdev_priv(dev); - - return mii_ethtool_sset(&tp->mii_if, cmd); -} - -static void sis190_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - struct sis190_private *tp = netdev_priv(dev); - - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(tp->pci_dev)); -} - -static int sis190_get_regs_len(struct net_device *dev) -{ - return SIS190_REGS_SIZE; -} - -static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs, - void *p) -{ - struct sis190_private *tp = netdev_priv(dev); - unsigned long flags; - - if (regs->len > SIS190_REGS_SIZE) - regs->len = SIS190_REGS_SIZE; - - spin_lock_irqsave(&tp->lock, flags); - memcpy_fromio(p, tp->mmio_addr, regs->len); - spin_unlock_irqrestore(&tp->lock, flags); -} - -static int sis190_nway_reset(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - - return mii_nway_restart(&tp->mii_if); -} - -static u32 sis190_get_msglevel(struct net_device *dev) -{ - struct sis190_private *tp = netdev_priv(dev); - - return tp->msg_enable; -} - -static void sis190_set_msglevel(struct net_device *dev, u32 value) -{ - struct sis190_private *tp = netdev_priv(dev); - - tp->msg_enable = value; -} - -static const struct ethtool_ops sis190_ethtool_ops = { - .get_settings = sis190_get_settings, - .set_settings = sis190_set_settings, - .get_drvinfo = sis190_get_drvinfo, - .get_regs_len = sis190_get_regs_len, - .get_regs = sis190_get_regs, - .get_link = ethtool_op_get_link, - .get_msglevel = sis190_get_msglevel, - .set_msglevel = sis190_set_msglevel, - .nway_reset = sis190_nway_reset, -}; - -static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - struct sis190_private *tp = netdev_priv(dev); - - return !netif_running(dev) ? -EINVAL : - generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL); -} - -static int sis190_mac_addr(struct net_device *dev, void *p) -{ - int rc; - - rc = eth_mac_addr(dev, p); - if (!rc) - sis190_init_rxfilter(dev); - return rc; -} - -static const struct net_device_ops sis190_netdev_ops = { - .ndo_open = sis190_open, - .ndo_stop = sis190_close, - .ndo_do_ioctl = sis190_ioctl, - .ndo_start_xmit = sis190_start_xmit, - .ndo_tx_timeout = sis190_tx_timeout, - .ndo_set_multicast_list = sis190_set_rx_mode, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = sis190_mac_addr, - .ndo_validate_addr = eth_validate_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = sis190_netpoll, -#endif -}; - -static int __devinit sis190_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - static int printed_version = 0; - struct sis190_private *tp; - struct net_device *dev; - void __iomem *ioaddr; - int rc; - - if (!printed_version) { - if (netif_msg_drv(&debug)) - pr_info(SIS190_DRIVER_NAME " loaded\n"); - printed_version = 1; - } - - dev = sis190_init_board(pdev); - if (IS_ERR(dev)) { - rc = PTR_ERR(dev); - goto out; - } - - pci_set_drvdata(pdev, dev); - - tp = netdev_priv(dev); - ioaddr = tp->mmio_addr; - - rc = sis190_get_mac_addr(pdev, dev); - if (rc < 0) - goto err_release_board; - - sis190_init_rxfilter(dev); - - INIT_WORK(&tp->phy_task, sis190_phy_task); - - dev->netdev_ops = &sis190_netdev_ops; - - SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops); - dev->irq = pdev->irq; - dev->base_addr = (unsigned long) 0xdead; - dev->watchdog_timeo = SIS190_TX_TIMEOUT; - - spin_lock_init(&tp->lock); - - rc = sis190_mii_probe(dev); - if (rc < 0) - goto err_release_board; - - rc = register_netdev(dev); - if (rc < 0) - goto err_remove_mii; - - if (netif_msg_probe(tp)) { - netdev_info(dev, "%s: %s at %p (IRQ: %d), %pM\n", - pci_name(pdev), - sis_chip_info[ent->driver_data].name, - ioaddr, dev->irq, dev->dev_addr); - netdev_info(dev, "%s mode.\n", - (tp->features & F_HAS_RGMII) ? "RGMII" : "GMII"); - } - - netif_carrier_off(dev); - - sis190_set_speed_auto(dev); -out: - return rc; - -err_remove_mii: - sis190_mii_remove(dev); -err_release_board: - sis190_release_board(pdev); - goto out; -} - -static void __devexit sis190_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct sis190_private *tp = netdev_priv(dev); - - sis190_mii_remove(dev); - cancel_work_sync(&tp->phy_task); - unregister_netdev(dev); - sis190_release_board(pdev); - pci_set_drvdata(pdev, NULL); -} - -static struct pci_driver sis190_pci_driver = { - .name = DRV_NAME, - .id_table = sis190_pci_tbl, - .probe = sis190_init_one, - .remove = __devexit_p(sis190_remove_one), -}; - -static int __init sis190_init_module(void) -{ - return pci_register_driver(&sis190_pci_driver); -} - -static void __exit sis190_cleanup_module(void) -{ - pci_unregister_driver(&sis190_pci_driver); -} - -module_init(sis190_init_module); -module_exit(sis190_cleanup_module); diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c deleted file mode 100644 index 658a1928fe79..000000000000 --- a/drivers/net/sis900.c +++ /dev/null @@ -1,2494 +0,0 @@ -/* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux. - Copyright 1999 Silicon Integrated System Corporation - Revision: 1.08.10 Apr. 2 2006 - - Modified from the driver which is originally written by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License (GPL), incorporated herein by reference. - Drivers based on this skeleton fall under the GPL and must retain - the authorship (implicit copyright) notice. - - References: - SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support, - preliminary Rev. 1.0 Jan. 14, 1998 - SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support, - preliminary Rev. 1.0 Nov. 10, 1998 - SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution, - preliminary Rev. 1.0 Jan. 18, 1998 - - Rev 1.08.10 Apr. 2 2006 Daniele Venzano add vlan (jumbo packets) support - Rev 1.08.09 Sep. 19 2005 Daniele Venzano add Wake on LAN support - Rev 1.08.08 Jan. 22 2005 Daniele Venzano use netif_msg for debugging messages - Rev 1.08.07 Nov. 2 2003 Daniele Venzano add suspend/resume support - Rev 1.08.06 Sep. 24 2002 Mufasa Yang bug fix for Tx timeout & add SiS963 support - Rev 1.08.05 Jun. 6 2002 Mufasa Yang bug fix for read_eeprom & Tx descriptor over-boundary - Rev 1.08.04 Apr. 25 2002 Mufasa Yang added SiS962 support - Rev 1.08.03 Feb. 1 2002 Matt Domsch update to use library crc32 function - Rev 1.08.02 Nov. 30 2001 Hui-Fen Hsu workaround for EDB & bug fix for dhcp problem - Rev 1.08.01 Aug. 25 2001 Hui-Fen Hsu update for 630ET & workaround for ICS1893 PHY - Rev 1.08.00 Jun. 11 2001 Hui-Fen Hsu workaround for RTL8201 PHY and some bug fix - Rev 1.07.11 Apr. 2 2001 Hui-Fen Hsu updates PCI drivers to use the new pci_set_dma_mask for kernel 2.4.3 - Rev 1.07.10 Mar. 1 2001 Hui-Fen Hsu some bug fix & 635M/B support - Rev 1.07.09 Feb. 9 2001 Dave Jones PCI enable cleanup - Rev 1.07.08 Jan. 8 2001 Lei-Chun Chang added RTL8201 PHY support - Rev 1.07.07 Nov. 29 2000 Lei-Chun Chang added kernel-doc extractable documentation and 630 workaround fix - Rev 1.07.06 Nov. 7 2000 Jeff Garzik some bug fix and cleaning - Rev 1.07.05 Nov. 6 2000 metapirat contribute media type select by ifconfig - Rev 1.07.04 Sep. 6 2000 Lei-Chun Chang added ICS1893 PHY support - Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E equalizer workaround rule - Rev 1.07.01 Aug. 08 2000 Ollie Lho minor update for SiS 630E and SiS 630E A1 - Rev 1.07 Mar. 07 2000 Ollie Lho bug fix in Rx buffer ring - Rev 1.06.04 Feb. 11 2000 Jeff Garzik softnet and init for kernel 2.4 - Rev 1.06.03 Dec. 23 1999 Ollie Lho Third release - Rev 1.06.02 Nov. 23 1999 Ollie Lho bug in mac probing fixed - Rev 1.06.01 Nov. 16 1999 Ollie Lho CRC calculation provide by Joseph Zbiciak (im14u2c@primenet.com) - Rev 1.06 Nov. 4 1999 Ollie Lho (ollie@sis.com.tw) Second release - Rev 1.05.05 Oct. 29 1999 Ollie Lho (ollie@sis.com.tw) Single buffer Tx/Rx - Chin-Shan Li (lcs@sis.com.tw) Added AMD Am79c901 HomePNA PHY support - Rev 1.05 Aug. 7 1999 Jim Huang (cmhuang@sis.com.tw) Initial release -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include /* Processor type for cache alignment. */ -#include -#include -#include /* User space memory access functions */ - -#include "sis900.h" - -#define SIS900_MODULE_NAME "sis900" -#define SIS900_DRV_VERSION "v1.08.10 Apr. 2 2006" - -static const char version[] __devinitconst = - KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n"; - -static int max_interrupt_work = 40; -static int multicast_filter_limit = 128; - -static int sis900_debug = -1; /* Use SIS900_DEF_MSG as value */ - -#define SIS900_DEF_MSG \ - (NETIF_MSG_DRV | \ - NETIF_MSG_LINK | \ - NETIF_MSG_RX_ERR | \ - NETIF_MSG_TX_ERR) - -/* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (4*HZ) - -enum { - SIS_900 = 0, - SIS_7016 -}; -static const char * card_names[] = { - "SiS 900 PCI Fast Ethernet", - "SiS 7016 PCI Fast Ethernet" -}; -static DEFINE_PCI_DEVICE_TABLE(sis900_pci_tbl) = { - {PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_900, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_900}, - {PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7016, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_7016}, - {0,} -}; -MODULE_DEVICE_TABLE (pci, sis900_pci_tbl); - -static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex); - -static const struct mii_chip_info { - const char * name; - u16 phy_id0; - u16 phy_id1; - u8 phy_types; -#define HOME 0x0001 -#define LAN 0x0002 -#define MIX 0x0003 -#define UNKNOWN 0x0 -} mii_chip_table[] = { - { "SiS 900 Internal MII PHY", 0x001d, 0x8000, LAN }, - { "SiS 7014 Physical Layer Solution", 0x0016, 0xf830, LAN }, - { "SiS 900 on Foxconn 661 7MI", 0x0143, 0xBC70, LAN }, - { "Altimata AC101LF PHY", 0x0022, 0x5520, LAN }, - { "ADM 7001 LAN PHY", 0x002e, 0xcc60, LAN }, - { "AMD 79C901 10BASE-T PHY", 0x0000, 0x6B70, LAN }, - { "AMD 79C901 HomePNA PHY", 0x0000, 0x6B90, HOME}, - { "ICS LAN PHY", 0x0015, 0xF440, LAN }, - { "ICS LAN PHY", 0x0143, 0xBC70, LAN }, - { "NS 83851 PHY", 0x2000, 0x5C20, MIX }, - { "NS 83847 PHY", 0x2000, 0x5C30, MIX }, - { "Realtek RTL8201 PHY", 0x0000, 0x8200, LAN }, - { "VIA 6103 PHY", 0x0101, 0x8f20, LAN }, - {NULL,}, -}; - -struct mii_phy { - struct mii_phy * next; - int phy_addr; - u16 phy_id0; - u16 phy_id1; - u16 status; - u8 phy_types; -}; - -typedef struct _BufferDesc { - u32 link; - u32 cmdsts; - u32 bufptr; -} BufferDesc; - -struct sis900_private { - struct pci_dev * pci_dev; - - spinlock_t lock; - - struct mii_phy * mii; - struct mii_phy * first_mii; /* record the first mii structure */ - unsigned int cur_phy; - struct mii_if_info mii_info; - - struct timer_list timer; /* Link status detection timer. */ - u8 autong_complete; /* 1: auto-negotiate complete */ - - u32 msg_enable; - - unsigned int cur_rx, dirty_rx; /* producer/comsumer pointers for Tx/Rx ring */ - unsigned int cur_tx, dirty_tx; - - /* The saved address of a sent/receive-in-place packet buffer */ - struct sk_buff *tx_skbuff[NUM_TX_DESC]; - struct sk_buff *rx_skbuff[NUM_RX_DESC]; - BufferDesc *tx_ring; - BufferDesc *rx_ring; - - dma_addr_t tx_ring_dma; - dma_addr_t rx_ring_dma; - - unsigned int tx_full; /* The Tx queue is full. */ - u8 host_bridge_rev; - u8 chipset_rev; -}; - -MODULE_AUTHOR("Jim Huang , Ollie Lho "); -MODULE_DESCRIPTION("SiS 900 PCI Fast Ethernet driver"); -MODULE_LICENSE("GPL"); - -module_param(multicast_filter_limit, int, 0444); -module_param(max_interrupt_work, int, 0444); -module_param(sis900_debug, int, 0444); -MODULE_PARM_DESC(multicast_filter_limit, "SiS 900/7016 maximum number of filtered multicast addresses"); -MODULE_PARM_DESC(max_interrupt_work, "SiS 900/7016 maximum events handled per interrupt"); -MODULE_PARM_DESC(sis900_debug, "SiS 900/7016 bitmapped debugging message level"); - -#ifdef CONFIG_NET_POLL_CONTROLLER -static void sis900_poll(struct net_device *dev); -#endif -static int sis900_open(struct net_device *net_dev); -static int sis900_mii_probe (struct net_device * net_dev); -static void sis900_init_rxfilter (struct net_device * net_dev); -static u16 read_eeprom(long ioaddr, int location); -static int mdio_read(struct net_device *net_dev, int phy_id, int location); -static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val); -static void sis900_timer(unsigned long data); -static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy); -static void sis900_tx_timeout(struct net_device *net_dev); -static void sis900_init_tx_ring(struct net_device *net_dev); -static void sis900_init_rx_ring(struct net_device *net_dev); -static netdev_tx_t sis900_start_xmit(struct sk_buff *skb, - struct net_device *net_dev); -static int sis900_rx(struct net_device *net_dev); -static void sis900_finish_xmit (struct net_device *net_dev); -static irqreturn_t sis900_interrupt(int irq, void *dev_instance); -static int sis900_close(struct net_device *net_dev); -static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd); -static u16 sis900_mcast_bitnr(u8 *addr, u8 revision); -static void set_rx_mode(struct net_device *net_dev); -static void sis900_reset(struct net_device *net_dev); -static void sis630_set_eq(struct net_device *net_dev, u8 revision); -static int sis900_set_config(struct net_device *dev, struct ifmap *map); -static u16 sis900_default_phy(struct net_device * net_dev); -static void sis900_set_capability( struct net_device *net_dev ,struct mii_phy *phy); -static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr); -static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr); -static void sis900_set_mode (long ioaddr, int speed, int duplex); -static const struct ethtool_ops sis900_ethtool_ops; - -/** - * sis900_get_mac_addr - Get MAC address for stand alone SiS900 model - * @pci_dev: the sis900 pci device - * @net_dev: the net device to get address for - * - * Older SiS900 and friends, use EEPROM to store MAC address. - * MAC address is read from read_eeprom() into @net_dev->dev_addr and - * @net_dev->perm_addr. - */ - -static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev) -{ - long ioaddr = pci_resource_start(pci_dev, 0); - u16 signature; - int i; - - /* check to see if we have sane EEPROM */ - signature = (u16) read_eeprom(ioaddr, EEPROMSignature); - if (signature == 0xffff || signature == 0x0000) { - printk (KERN_WARNING "%s: Error EERPOM read %x\n", - pci_name(pci_dev), signature); - return 0; - } - - /* get MAC address from EEPROM */ - for (i = 0; i < 3; i++) - ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr); - - /* Store MAC Address in perm_addr */ - memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); - - return 1; -} - -/** - * sis630e_get_mac_addr - Get MAC address for SiS630E model - * @pci_dev: the sis900 pci device - * @net_dev: the net device to get address for - * - * SiS630E model, use APC CMOS RAM to store MAC address. - * APC CMOS RAM is accessed through ISA bridge. - * MAC address is read into @net_dev->dev_addr and - * @net_dev->perm_addr. - */ - -static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, - struct net_device *net_dev) -{ - struct pci_dev *isa_bridge = NULL; - u8 reg; - int i; - - isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0008, isa_bridge); - if (!isa_bridge) - isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0018, isa_bridge); - if (!isa_bridge) { - printk(KERN_WARNING "%s: Can not find ISA bridge\n", - pci_name(pci_dev)); - return 0; - } - pci_read_config_byte(isa_bridge, 0x48, ®); - pci_write_config_byte(isa_bridge, 0x48, reg | 0x40); - - for (i = 0; i < 6; i++) { - outb(0x09 + i, 0x70); - ((u8 *)(net_dev->dev_addr))[i] = inb(0x71); - } - - /* Store MAC Address in perm_addr */ - memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); - - pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40); - pci_dev_put(isa_bridge); - - return 1; -} - - -/** - * sis635_get_mac_addr - Get MAC address for SIS635 model - * @pci_dev: the sis900 pci device - * @net_dev: the net device to get address for - * - * SiS635 model, set MAC Reload Bit to load Mac address from APC - * to rfdr. rfdr is accessed through rfcr. MAC address is read into - * @net_dev->dev_addr and @net_dev->perm_addr. - */ - -static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, - struct net_device *net_dev) -{ - long ioaddr = net_dev->base_addr; - u32 rfcrSave; - u32 i; - - rfcrSave = inl(rfcr + ioaddr); - - outl(rfcrSave | RELOAD, ioaddr + cr); - outl(0, ioaddr + cr); - - /* disable packet filtering before setting filter */ - outl(rfcrSave & ~RFEN, rfcr + ioaddr); - - /* load MAC addr to filter data register */ - for (i = 0 ; i < 3 ; i++) { - outl((i << RFADDR_shift), ioaddr + rfcr); - *( ((u16 *)net_dev->dev_addr) + i) = inw(ioaddr + rfdr); - } - - /* Store MAC Address in perm_addr */ - memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); - - /* enable packet filtering */ - outl(rfcrSave | RFEN, rfcr + ioaddr); - - return 1; -} - -/** - * sis96x_get_mac_addr - Get MAC address for SiS962 or SiS963 model - * @pci_dev: the sis900 pci device - * @net_dev: the net device to get address for - * - * SiS962 or SiS963 model, use EEPROM to store MAC address. And EEPROM - * is shared by - * LAN and 1394. When access EEPROM, send EEREQ signal to hardware first - * and wait for EEGNT. If EEGNT is ON, EEPROM is permitted to be access - * by LAN, otherwise is not. After MAC address is read from EEPROM, send - * EEDONE signal to refuse EEPROM access by LAN. - * The EEPROM map of SiS962 or SiS963 is different to SiS900. - * The signature field in SiS962 or SiS963 spec is meaningless. - * MAC address is read into @net_dev->dev_addr and @net_dev->perm_addr. - */ - -static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev, - struct net_device *net_dev) -{ - long ioaddr = net_dev->base_addr; - long ee_addr = ioaddr + mear; - u32 waittime = 0; - int i; - - outl(EEREQ, ee_addr); - while(waittime < 2000) { - if(inl(ee_addr) & EEGNT) { - - /* get MAC address from EEPROM */ - for (i = 0; i < 3; i++) - ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr); - - /* Store MAC Address in perm_addr */ - memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN); - - outl(EEDONE, ee_addr); - return 1; - } else { - udelay(1); - waittime ++; - } - } - outl(EEDONE, ee_addr); - return 0; -} - -static const struct net_device_ops sis900_netdev_ops = { - .ndo_open = sis900_open, - .ndo_stop = sis900_close, - .ndo_start_xmit = sis900_start_xmit, - .ndo_set_config = sis900_set_config, - .ndo_set_multicast_list = set_rx_mode, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_do_ioctl = mii_ioctl, - .ndo_tx_timeout = sis900_tx_timeout, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = sis900_poll, -#endif -}; - -/** - * sis900_probe - Probe for sis900 device - * @pci_dev: the sis900 pci device - * @pci_id: the pci device ID - * - * Check and probe sis900 net device for @pci_dev. - * Get mac address according to the chip revision, - * and assign SiS900-specific entries in the device structure. - * ie: sis900_open(), sis900_start_xmit(), sis900_close(), etc. - */ - -static int __devinit sis900_probe(struct pci_dev *pci_dev, - const struct pci_device_id *pci_id) -{ - struct sis900_private *sis_priv; - struct net_device *net_dev; - struct pci_dev *dev; - dma_addr_t ring_dma; - void *ring_space; - long ioaddr; - int i, ret; - const char *card_name = card_names[pci_id->driver_data]; - const char *dev_name = pci_name(pci_dev); - -/* when built into the kernel, we only print version if device is found */ -#ifndef MODULE - static int printed_version; - if (!printed_version++) - printk(version); -#endif - - /* setup various bits in PCI command register */ - ret = pci_enable_device(pci_dev); - if(ret) return ret; - - i = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32)); - if(i){ - printk(KERN_ERR "sis900.c: architecture does not support " - "32bit PCI busmaster DMA\n"); - return i; - } - - pci_set_master(pci_dev); - - net_dev = alloc_etherdev(sizeof(struct sis900_private)); - if (!net_dev) - return -ENOMEM; - SET_NETDEV_DEV(net_dev, &pci_dev->dev); - - /* We do a request_region() to register /proc/ioports info. */ - ioaddr = pci_resource_start(pci_dev, 0); - ret = pci_request_regions(pci_dev, "sis900"); - if (ret) - goto err_out; - - sis_priv = netdev_priv(net_dev); - net_dev->base_addr = ioaddr; - net_dev->irq = pci_dev->irq; - sis_priv->pci_dev = pci_dev; - spin_lock_init(&sis_priv->lock); - - pci_set_drvdata(pci_dev, net_dev); - - ring_space = pci_alloc_consistent(pci_dev, TX_TOTAL_SIZE, &ring_dma); - if (!ring_space) { - ret = -ENOMEM; - goto err_out_cleardev; - } - sis_priv->tx_ring = ring_space; - sis_priv->tx_ring_dma = ring_dma; - - ring_space = pci_alloc_consistent(pci_dev, RX_TOTAL_SIZE, &ring_dma); - if (!ring_space) { - ret = -ENOMEM; - goto err_unmap_tx; - } - sis_priv->rx_ring = ring_space; - sis_priv->rx_ring_dma = ring_dma; - - /* The SiS900-specific entries in the device structure. */ - net_dev->netdev_ops = &sis900_netdev_ops; - net_dev->watchdog_timeo = TX_TIMEOUT; - net_dev->ethtool_ops = &sis900_ethtool_ops; - - if (sis900_debug > 0) - sis_priv->msg_enable = sis900_debug; - else - sis_priv->msg_enable = SIS900_DEF_MSG; - - sis_priv->mii_info.dev = net_dev; - sis_priv->mii_info.mdio_read = mdio_read; - sis_priv->mii_info.mdio_write = mdio_write; - sis_priv->mii_info.phy_id_mask = 0x1f; - sis_priv->mii_info.reg_num_mask = 0x1f; - - /* Get Mac address according to the chip revision */ - sis_priv->chipset_rev = pci_dev->revision; - if(netif_msg_probe(sis_priv)) - printk(KERN_DEBUG "%s: detected revision %2.2x, " - "trying to get MAC address...\n", - dev_name, sis_priv->chipset_rev); - - ret = 0; - if (sis_priv->chipset_rev == SIS630E_900_REV) - ret = sis630e_get_mac_addr(pci_dev, net_dev); - else if ((sis_priv->chipset_rev > 0x81) && (sis_priv->chipset_rev <= 0x90) ) - ret = sis635_get_mac_addr(pci_dev, net_dev); - else if (sis_priv->chipset_rev == SIS96x_900_REV) - ret = sis96x_get_mac_addr(pci_dev, net_dev); - else - ret = sis900_get_mac_addr(pci_dev, net_dev); - - if (!ret || !is_valid_ether_addr(net_dev->dev_addr)) { - random_ether_addr(net_dev->dev_addr); - printk(KERN_WARNING "%s: Unreadable or invalid MAC address," - "using random generated one\n", dev_name); - } - - /* 630ET : set the mii access mode as software-mode */ - if (sis_priv->chipset_rev == SIS630ET_900_REV) - outl(ACCESSMODE | inl(ioaddr + cr), ioaddr + cr); - - /* probe for mii transceiver */ - if (sis900_mii_probe(net_dev) == 0) { - printk(KERN_WARNING "%s: Error probing MII device.\n", - dev_name); - ret = -ENODEV; - goto err_unmap_rx; - } - - /* save our host bridge revision */ - dev = pci_get_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_630, NULL); - if (dev) { - sis_priv->host_bridge_rev = dev->revision; - pci_dev_put(dev); - } - - ret = register_netdev(net_dev); - if (ret) - goto err_unmap_rx; - - /* print some information about our NIC */ - printk(KERN_INFO "%s: %s at %#lx, IRQ %d, %pM\n", - net_dev->name, card_name, ioaddr, net_dev->irq, - net_dev->dev_addr); - - /* Detect Wake on Lan support */ - ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27; - if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0) - printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name); - - return 0; - - err_unmap_rx: - pci_free_consistent(pci_dev, RX_TOTAL_SIZE, sis_priv->rx_ring, - sis_priv->rx_ring_dma); - err_unmap_tx: - pci_free_consistent(pci_dev, TX_TOTAL_SIZE, sis_priv->tx_ring, - sis_priv->tx_ring_dma); - err_out_cleardev: - pci_set_drvdata(pci_dev, NULL); - pci_release_regions(pci_dev); - err_out: - free_netdev(net_dev); - return ret; -} - -/** - * sis900_mii_probe - Probe MII PHY for sis900 - * @net_dev: the net device to probe for - * - * Search for total of 32 possible mii phy addresses. - * Identify and set current phy if found one, - * return error if it failed to found. - */ - -static int __devinit sis900_mii_probe(struct net_device * net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - const char *dev_name = pci_name(sis_priv->pci_dev); - u16 poll_bit = MII_STAT_LINK, status = 0; - unsigned long timeout = jiffies + 5 * HZ; - int phy_addr; - - sis_priv->mii = NULL; - - /* search for total of 32 possible mii phy addresses */ - for (phy_addr = 0; phy_addr < 32; phy_addr++) { - struct mii_phy * mii_phy = NULL; - u16 mii_status; - int i; - - mii_phy = NULL; - for(i = 0; i < 2; i++) - mii_status = mdio_read(net_dev, phy_addr, MII_STATUS); - - if (mii_status == 0xffff || mii_status == 0x0000) { - if (netif_msg_probe(sis_priv)) - printk(KERN_DEBUG "%s: MII at address %d" - " not accessible\n", - dev_name, phy_addr); - continue; - } - - if ((mii_phy = kmalloc(sizeof(struct mii_phy), GFP_KERNEL)) == NULL) { - printk(KERN_WARNING "Cannot allocate mem for struct mii_phy\n"); - mii_phy = sis_priv->first_mii; - while (mii_phy) { - struct mii_phy *phy; - phy = mii_phy; - mii_phy = mii_phy->next; - kfree(phy); - } - return 0; - } - - mii_phy->phy_id0 = mdio_read(net_dev, phy_addr, MII_PHY_ID0); - mii_phy->phy_id1 = mdio_read(net_dev, phy_addr, MII_PHY_ID1); - mii_phy->phy_addr = phy_addr; - mii_phy->status = mii_status; - mii_phy->next = sis_priv->mii; - sis_priv->mii = mii_phy; - sis_priv->first_mii = mii_phy; - - for (i = 0; mii_chip_table[i].phy_id1; i++) - if ((mii_phy->phy_id0 == mii_chip_table[i].phy_id0 ) && - ((mii_phy->phy_id1 & 0xFFF0) == mii_chip_table[i].phy_id1)){ - mii_phy->phy_types = mii_chip_table[i].phy_types; - if (mii_chip_table[i].phy_types == MIX) - mii_phy->phy_types = - (mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX)) ? LAN : HOME; - printk(KERN_INFO "%s: %s transceiver found " - "at address %d.\n", - dev_name, - mii_chip_table[i].name, - phy_addr); - break; - } - - if( !mii_chip_table[i].phy_id1 ) { - printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n", - dev_name, phy_addr); - mii_phy->phy_types = UNKNOWN; - } - } - - if (sis_priv->mii == NULL) { - printk(KERN_INFO "%s: No MII transceivers found!\n", dev_name); - return 0; - } - - /* select default PHY for mac */ - sis_priv->mii = NULL; - sis900_default_phy( net_dev ); - - /* Reset phy if default phy is internal sis900 */ - if ((sis_priv->mii->phy_id0 == 0x001D) && - ((sis_priv->mii->phy_id1&0xFFF0) == 0x8000)) - status = sis900_reset_phy(net_dev, sis_priv->cur_phy); - - /* workaround for ICS1893 PHY */ - if ((sis_priv->mii->phy_id0 == 0x0015) && - ((sis_priv->mii->phy_id1&0xFFF0) == 0xF440)) - mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200); - - if(status & MII_STAT_LINK){ - while (poll_bit) { - yield(); - - poll_bit ^= (mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS) & poll_bit); - if (time_after_eq(jiffies, timeout)) { - printk(KERN_WARNING "%s: reset phy and link down now\n", - dev_name); - return -ETIME; - } - } - } - - if (sis_priv->chipset_rev == SIS630E_900_REV) { - /* SiS 630E has some bugs on default value of PHY registers */ - mdio_write(net_dev, sis_priv->cur_phy, MII_ANADV, 0x05e1); - mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG1, 0x22); - mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG2, 0xff00); - mdio_write(net_dev, sis_priv->cur_phy, MII_MASK, 0xffc0); - //mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, 0x1000); - } - - if (sis_priv->mii->status & MII_STAT_LINK) - netif_carrier_on(net_dev); - else - netif_carrier_off(net_dev); - - return 1; -} - -/** - * sis900_default_phy - Select default PHY for sis900 mac. - * @net_dev: the net device to probe for - * - * Select first detected PHY with link as default. - * If no one is link on, select PHY whose types is HOME as default. - * If HOME doesn't exist, select LAN. - */ - -static u16 sis900_default_phy(struct net_device * net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - struct mii_phy *phy = NULL, *phy_home = NULL, - *default_phy = NULL, *phy_lan = NULL; - u16 status; - - for (phy=sis_priv->first_mii; phy; phy=phy->next) { - status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); - status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); - - /* Link ON & Not select default PHY & not ghost PHY */ - if ((status & MII_STAT_LINK) && !default_phy && - (phy->phy_types != UNKNOWN)) - default_phy = phy; - else { - status = mdio_read(net_dev, phy->phy_addr, MII_CONTROL); - mdio_write(net_dev, phy->phy_addr, MII_CONTROL, - status | MII_CNTL_AUTO | MII_CNTL_ISOLATE); - if (phy->phy_types == HOME) - phy_home = phy; - else if(phy->phy_types == LAN) - phy_lan = phy; - } - } - - if (!default_phy && phy_home) - default_phy = phy_home; - else if (!default_phy && phy_lan) - default_phy = phy_lan; - else if (!default_phy) - default_phy = sis_priv->first_mii; - - if (sis_priv->mii != default_phy) { - sis_priv->mii = default_phy; - sis_priv->cur_phy = default_phy->phy_addr; - printk(KERN_INFO "%s: Using transceiver found at address %d as default\n", - pci_name(sis_priv->pci_dev), sis_priv->cur_phy); - } - - sis_priv->mii_info.phy_id = sis_priv->cur_phy; - - status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL); - status &= (~MII_CNTL_ISOLATE); - - mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, status); - status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); - status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); - - return status; -} - - -/** - * sis900_set_capability - set the media capability of network adapter. - * @net_dev : the net device to probe for - * @phy : default PHY - * - * Set the media capability of network adapter according to - * mii status register. It's necessary before auto-negotiate. - */ - -static void sis900_set_capability(struct net_device *net_dev, struct mii_phy *phy) -{ - u16 cap; - u16 status; - - status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); - status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); - - cap = MII_NWAY_CSMA_CD | - ((phy->status & MII_STAT_CAN_TX_FDX)? MII_NWAY_TX_FDX:0) | - ((phy->status & MII_STAT_CAN_TX) ? MII_NWAY_TX:0) | - ((phy->status & MII_STAT_CAN_T_FDX) ? MII_NWAY_T_FDX:0)| - ((phy->status & MII_STAT_CAN_T) ? MII_NWAY_T:0); - - mdio_write(net_dev, phy->phy_addr, MII_ANADV, cap); -} - - -/* Delay between EEPROM clock transitions. */ -#define eeprom_delay() inl(ee_addr) - -/** - * read_eeprom - Read Serial EEPROM - * @ioaddr: base i/o address - * @location: the EEPROM location to read - * - * Read Serial EEPROM through EEPROM Access Register. - * Note that location is in word (16 bits) unit - */ - -static u16 __devinit read_eeprom(long ioaddr, int location) -{ - int i; - u16 retval = 0; - long ee_addr = ioaddr + mear; - u32 read_cmd = location | EEread; - - outl(0, ee_addr); - eeprom_delay(); - outl(EECS, ee_addr); - eeprom_delay(); - - /* Shift the read command (9) bits out. */ - for (i = 8; i >= 0; i--) { - u32 dataval = (read_cmd & (1 << i)) ? EEDI | EECS : EECS; - outl(dataval, ee_addr); - eeprom_delay(); - outl(dataval | EECLK, ee_addr); - eeprom_delay(); - } - outl(EECS, ee_addr); - eeprom_delay(); - - /* read the 16-bits data in */ - for (i = 16; i > 0; i--) { - outl(EECS, ee_addr); - eeprom_delay(); - outl(EECS | EECLK, ee_addr); - eeprom_delay(); - retval = (retval << 1) | ((inl(ee_addr) & EEDO) ? 1 : 0); - eeprom_delay(); - } - - /* Terminate the EEPROM access. */ - outl(0, ee_addr); - eeprom_delay(); - - return retval; -} - -/* Read and write the MII management registers using software-generated - serial MDIO protocol. Note that the command bits and data bits are - send out separately */ -#define mdio_delay() inl(mdio_addr) - -static void mdio_idle(long mdio_addr) -{ - outl(MDIO | MDDIR, mdio_addr); - mdio_delay(); - outl(MDIO | MDDIR | MDC, mdio_addr); -} - -/* Syncronize the MII management interface by shifting 32 one bits out. */ -static void mdio_reset(long mdio_addr) -{ - int i; - - for (i = 31; i >= 0; i--) { - outl(MDDIR | MDIO, mdio_addr); - mdio_delay(); - outl(MDDIR | MDIO | MDC, mdio_addr); - mdio_delay(); - } -} - -/** - * mdio_read - read MII PHY register - * @net_dev: the net device to read - * @phy_id: the phy address to read - * @location: the phy regiester id to read - * - * Read MII registers through MDIO and MDC - * using MDIO management frame structure and protocol(defined by ISO/IEC). - * Please see SiS7014 or ICS spec - */ - -static int mdio_read(struct net_device *net_dev, int phy_id, int location) -{ - long mdio_addr = net_dev->base_addr + mear; - int mii_cmd = MIIread|(phy_id<= 0; i--) { - int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR; - outl(dataval, mdio_addr); - mdio_delay(); - outl(dataval | MDC, mdio_addr); - mdio_delay(); - } - - /* Read the 16 data bits. */ - for (i = 16; i > 0; i--) { - outl(0, mdio_addr); - mdio_delay(); - retval = (retval << 1) | ((inl(mdio_addr) & MDIO) ? 1 : 0); - outl(MDC, mdio_addr); - mdio_delay(); - } - outl(0x00, mdio_addr); - - return retval; -} - -/** - * mdio_write - write MII PHY register - * @net_dev: the net device to write - * @phy_id: the phy address to write - * @location: the phy regiester id to write - * @value: the register value to write with - * - * Write MII registers with @value through MDIO and MDC - * using MDIO management frame structure and protocol(defined by ISO/IEC) - * please see SiS7014 or ICS spec - */ - -static void mdio_write(struct net_device *net_dev, int phy_id, int location, - int value) -{ - long mdio_addr = net_dev->base_addr + mear; - int mii_cmd = MIIwrite|(phy_id<= 0; i--) { - int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR; - outb(dataval, mdio_addr); - mdio_delay(); - outb(dataval | MDC, mdio_addr); - mdio_delay(); - } - mdio_delay(); - - /* Shift the value bits out. */ - for (i = 15; i >= 0; i--) { - int dataval = (value & (1 << i)) ? MDDIR | MDIO : MDDIR; - outl(dataval, mdio_addr); - mdio_delay(); - outl(dataval | MDC, mdio_addr); - mdio_delay(); - } - mdio_delay(); - - /* Clear out extra bits. */ - for (i = 2; i > 0; i--) { - outb(0, mdio_addr); - mdio_delay(); - outb(MDC, mdio_addr); - mdio_delay(); - } - outl(0x00, mdio_addr); -} - - -/** - * sis900_reset_phy - reset sis900 mii phy. - * @net_dev: the net device to write - * @phy_addr: default phy address - * - * Some specific phy can't work properly without reset. - * This function will be called during initialization and - * link status change from ON to DOWN. - */ - -static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr) -{ - int i; - u16 status; - - for (i = 0; i < 2; i++) - status = mdio_read(net_dev, phy_addr, MII_STATUS); - - mdio_write( net_dev, phy_addr, MII_CONTROL, MII_CNTL_RESET ); - - return status; -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. -*/ -static void sis900_poll(struct net_device *dev) -{ - disable_irq(dev->irq); - sis900_interrupt(dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -/** - * sis900_open - open sis900 device - * @net_dev: the net device to open - * - * Do some initialization and start net interface. - * enable interrupts and set sis900 timer. - */ - -static int -sis900_open(struct net_device *net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - long ioaddr = net_dev->base_addr; - int ret; - - /* Soft reset the chip. */ - sis900_reset(net_dev); - - /* Equalizer workaround Rule */ - sis630_set_eq(net_dev, sis_priv->chipset_rev); - - ret = request_irq(net_dev->irq, sis900_interrupt, IRQF_SHARED, - net_dev->name, net_dev); - if (ret) - return ret; - - sis900_init_rxfilter(net_dev); - - sis900_init_tx_ring(net_dev); - sis900_init_rx_ring(net_dev); - - set_rx_mode(net_dev); - - netif_start_queue(net_dev); - - /* Workaround for EDB */ - sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); - - /* Enable all known interrupts by setting the interrupt mask. */ - outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr); - outl(RxENA | inl(ioaddr + cr), ioaddr + cr); - outl(IE, ioaddr + ier); - - sis900_check_mode(net_dev, sis_priv->mii); - - /* Set the timer to switch to check for link beat and perhaps switch - to an alternate media type. */ - init_timer(&sis_priv->timer); - sis_priv->timer.expires = jiffies + HZ; - sis_priv->timer.data = (unsigned long)net_dev; - sis_priv->timer.function = sis900_timer; - add_timer(&sis_priv->timer); - - return 0; -} - -/** - * sis900_init_rxfilter - Initialize the Rx filter - * @net_dev: the net device to initialize for - * - * Set receive filter address to our MAC address - * and enable packet filtering. - */ - -static void -sis900_init_rxfilter (struct net_device * net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - long ioaddr = net_dev->base_addr; - u32 rfcrSave; - u32 i; - - rfcrSave = inl(rfcr + ioaddr); - - /* disable packet filtering before setting filter */ - outl(rfcrSave & ~RFEN, rfcr + ioaddr); - - /* load MAC addr to filter data register */ - for (i = 0 ; i < 3 ; i++) { - u32 w; - - w = (u32) *((u16 *)(net_dev->dev_addr)+i); - outl((i << RFADDR_shift), ioaddr + rfcr); - outl(w, ioaddr + rfdr); - - if (netif_msg_hw(sis_priv)) { - printk(KERN_DEBUG "%s: Receive Filter Addrss[%d]=%x\n", - net_dev->name, i, inl(ioaddr + rfdr)); - } - } - - /* enable packet filtering */ - outl(rfcrSave | RFEN, rfcr + ioaddr); -} - -/** - * sis900_init_tx_ring - Initialize the Tx descriptor ring - * @net_dev: the net device to initialize for - * - * Initialize the Tx descriptor ring, - */ - -static void -sis900_init_tx_ring(struct net_device *net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - long ioaddr = net_dev->base_addr; - int i; - - sis_priv->tx_full = 0; - sis_priv->dirty_tx = sis_priv->cur_tx = 0; - - for (i = 0; i < NUM_TX_DESC; i++) { - sis_priv->tx_skbuff[i] = NULL; - - sis_priv->tx_ring[i].link = sis_priv->tx_ring_dma + - ((i+1)%NUM_TX_DESC)*sizeof(BufferDesc); - sis_priv->tx_ring[i].cmdsts = 0; - sis_priv->tx_ring[i].bufptr = 0; - } - - /* load Transmit Descriptor Register */ - outl(sis_priv->tx_ring_dma, ioaddr + txdp); - if (netif_msg_hw(sis_priv)) - printk(KERN_DEBUG "%s: TX descriptor register loaded with: %8.8x\n", - net_dev->name, inl(ioaddr + txdp)); -} - -/** - * sis900_init_rx_ring - Initialize the Rx descriptor ring - * @net_dev: the net device to initialize for - * - * Initialize the Rx descriptor ring, - * and pre-allocate recevie buffers (socket buffer) - */ - -static void -sis900_init_rx_ring(struct net_device *net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - long ioaddr = net_dev->base_addr; - int i; - - sis_priv->cur_rx = 0; - sis_priv->dirty_rx = 0; - - /* init RX descriptor */ - for (i = 0; i < NUM_RX_DESC; i++) { - sis_priv->rx_skbuff[i] = NULL; - - sis_priv->rx_ring[i].link = sis_priv->rx_ring_dma + - ((i+1)%NUM_RX_DESC)*sizeof(BufferDesc); - sis_priv->rx_ring[i].cmdsts = 0; - sis_priv->rx_ring[i].bufptr = 0; - } - - /* allocate sock buffers */ - for (i = 0; i < NUM_RX_DESC; i++) { - struct sk_buff *skb; - - if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { - /* not enough memory for skbuff, this makes a "hole" - on the buffer ring, it is not clear how the - hardware will react to this kind of degenerated - buffer */ - break; - } - sis_priv->rx_skbuff[i] = skb; - sis_priv->rx_ring[i].cmdsts = RX_BUF_SIZE; - sis_priv->rx_ring[i].bufptr = pci_map_single(sis_priv->pci_dev, - skb->data, RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - } - sis_priv->dirty_rx = (unsigned int) (i - NUM_RX_DESC); - - /* load Receive Descriptor Register */ - outl(sis_priv->rx_ring_dma, ioaddr + rxdp); - if (netif_msg_hw(sis_priv)) - printk(KERN_DEBUG "%s: RX descriptor register loaded with: %8.8x\n", - net_dev->name, inl(ioaddr + rxdp)); -} - -/** - * sis630_set_eq - set phy equalizer value for 630 LAN - * @net_dev: the net device to set equalizer value - * @revision: 630 LAN revision number - * - * 630E equalizer workaround rule(Cyrus Huang 08/15) - * PHY register 14h(Test) - * Bit 14: 0 -- Automatically detect (default) - * 1 -- Manually set Equalizer filter - * Bit 13: 0 -- (Default) - * 1 -- Speed up convergence of equalizer setting - * Bit 9 : 0 -- (Default) - * 1 -- Disable Baseline Wander - * Bit 3~7 -- Equalizer filter setting - * Link ON: Set Bit 9, 13 to 1, Bit 14 to 0 - * Then calculate equalizer value - * Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0 - * Link Off:Set Bit 13 to 1, Bit 14 to 0 - * Calculate Equalizer value: - * When Link is ON and Bit 14 is 0, SIS900PHY will auto-detect proper equalizer value. - * When the equalizer is stable, this value is not a fixed value. It will be within - * a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9) - * 0 <= max <= 4 --> set equalizer to max - * 5 <= max <= 14 --> set equalizer to max+1 or set equalizer to max+2 if max == min - * max >= 15 --> set equalizer to max+5 or set equalizer to max+6 if max == min - */ - -static void sis630_set_eq(struct net_device *net_dev, u8 revision) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - u16 reg14h, eq_value=0, max_value=0, min_value=0; - int i, maxcount=10; - - if ( !(revision == SIS630E_900_REV || revision == SIS630EA1_900_REV || - revision == SIS630A_900_REV || revision == SIS630ET_900_REV) ) - return; - - if (netif_carrier_ok(net_dev)) { - reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); - mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, - (0x2200 | reg14h) & 0xBFFF); - for (i=0; i < maxcount; i++) { - eq_value = (0x00F8 & mdio_read(net_dev, - sis_priv->cur_phy, MII_RESV)) >> 3; - if (i == 0) - max_value=min_value=eq_value; - max_value = (eq_value > max_value) ? - eq_value : max_value; - min_value = (eq_value < min_value) ? - eq_value : min_value; - } - /* 630E rule to determine the equalizer value */ - if (revision == SIS630E_900_REV || revision == SIS630EA1_900_REV || - revision == SIS630ET_900_REV) { - if (max_value < 5) - eq_value = max_value; - else if (max_value >= 5 && max_value < 15) - eq_value = (max_value == min_value) ? - max_value+2 : max_value+1; - else if (max_value >= 15) - eq_value=(max_value == min_value) ? - max_value+6 : max_value+5; - } - /* 630B0&B1 rule to determine the equalizer value */ - if (revision == SIS630A_900_REV && - (sis_priv->host_bridge_rev == SIS630B0 || - sis_priv->host_bridge_rev == SIS630B1)) { - if (max_value == 0) - eq_value = 3; - else - eq_value = (max_value + min_value + 1)/2; - } - /* write equalizer value and setting */ - reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); - reg14h = (reg14h & 0xFF07) | ((eq_value << 3) & 0x00F8); - reg14h = (reg14h | 0x6000) & 0xFDFF; - mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, reg14h); - } else { - reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); - if (revision == SIS630A_900_REV && - (sis_priv->host_bridge_rev == SIS630B0 || - sis_priv->host_bridge_rev == SIS630B1)) - mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, - (reg14h | 0x2200) & 0xBFFF); - else - mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, - (reg14h | 0x2000) & 0xBFFF); - } -} - -/** - * sis900_timer - sis900 timer routine - * @data: pointer to sis900 net device - * - * On each timer ticks we check two things, - * link status (ON/OFF) and link mode (10/100/Full/Half) - */ - -static void sis900_timer(unsigned long data) -{ - struct net_device *net_dev = (struct net_device *)data; - struct sis900_private *sis_priv = netdev_priv(net_dev); - struct mii_phy *mii_phy = sis_priv->mii; - static const int next_tick = 5*HZ; - u16 status; - - if (!sis_priv->autong_complete){ - int uninitialized_var(speed), duplex = 0; - - sis900_read_mode(net_dev, &speed, &duplex); - if (duplex){ - sis900_set_mode(net_dev->base_addr, speed, duplex); - sis630_set_eq(net_dev, sis_priv->chipset_rev); - netif_start_queue(net_dev); - } - - sis_priv->timer.expires = jiffies + HZ; - add_timer(&sis_priv->timer); - return; - } - - status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); - status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); - - /* Link OFF -> ON */ - if (!netif_carrier_ok(net_dev)) { - LookForLink: - /* Search for new PHY */ - status = sis900_default_phy(net_dev); - mii_phy = sis_priv->mii; - - if (status & MII_STAT_LINK){ - sis900_check_mode(net_dev, mii_phy); - netif_carrier_on(net_dev); - } - } else { - /* Link ON -> OFF */ - if (!(status & MII_STAT_LINK)){ - netif_carrier_off(net_dev); - if(netif_msg_link(sis_priv)) - printk(KERN_INFO "%s: Media Link Off\n", net_dev->name); - - /* Change mode issue */ - if ((mii_phy->phy_id0 == 0x001D) && - ((mii_phy->phy_id1 & 0xFFF0) == 0x8000)) - sis900_reset_phy(net_dev, sis_priv->cur_phy); - - sis630_set_eq(net_dev, sis_priv->chipset_rev); - - goto LookForLink; - } - } - - sis_priv->timer.expires = jiffies + next_tick; - add_timer(&sis_priv->timer); -} - -/** - * sis900_check_mode - check the media mode for sis900 - * @net_dev: the net device to be checked - * @mii_phy: the mii phy - * - * Older driver gets the media mode from mii status output - * register. Now we set our media capability and auto-negotiate - * to get the upper bound of speed and duplex between two ends. - * If the types of mii phy is HOME, it doesn't need to auto-negotiate - * and autong_complete should be set to 1. - */ - -static void sis900_check_mode(struct net_device *net_dev, struct mii_phy *mii_phy) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - long ioaddr = net_dev->base_addr; - int speed, duplex; - - if (mii_phy->phy_types == LAN) { - outl(~EXD & inl(ioaddr + cfg), ioaddr + cfg); - sis900_set_capability(net_dev , mii_phy); - sis900_auto_negotiate(net_dev, sis_priv->cur_phy); - } else { - outl(EXD | inl(ioaddr + cfg), ioaddr + cfg); - speed = HW_SPEED_HOME; - duplex = FDX_CAPABLE_HALF_SELECTED; - sis900_set_mode(ioaddr, speed, duplex); - sis_priv->autong_complete = 1; - } -} - -/** - * sis900_set_mode - Set the media mode of mac register. - * @ioaddr: the address of the device - * @speed : the transmit speed to be determined - * @duplex: the duplex mode to be determined - * - * Set the media mode of mac register txcfg/rxcfg according to - * speed and duplex of phy. Bit EDB_MASTER_EN indicates the EDB - * bus is used instead of PCI bus. When this bit is set 1, the - * Max DMA Burst Size for TX/RX DMA should be no larger than 16 - * double words. - */ - -static void sis900_set_mode (long ioaddr, int speed, int duplex) -{ - u32 tx_flags = 0, rx_flags = 0; - - if (inl(ioaddr + cfg) & EDB_MASTER_EN) { - tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) | - (TX_FILL_THRESH << TxFILLT_shift); - rx_flags = DMA_BURST_64 << RxMXDMA_shift; - } else { - tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) | - (TX_FILL_THRESH << TxFILLT_shift); - rx_flags = DMA_BURST_512 << RxMXDMA_shift; - } - - if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS) { - rx_flags |= (RxDRNT_10 << RxDRNT_shift); - tx_flags |= (TxDRNT_10 << TxDRNT_shift); - } else { - rx_flags |= (RxDRNT_100 << RxDRNT_shift); - tx_flags |= (TxDRNT_100 << TxDRNT_shift); - } - - if (duplex == FDX_CAPABLE_FULL_SELECTED) { - tx_flags |= (TxCSI | TxHBI); - rx_flags |= RxATX; - } - -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) - /* Can accept Jumbo packet */ - rx_flags |= RxAJAB; -#endif - - outl (tx_flags, ioaddr + txcfg); - outl (rx_flags, ioaddr + rxcfg); -} - -/** - * sis900_auto_negotiate - Set the Auto-Negotiation Enable/Reset bit. - * @net_dev: the net device to read mode for - * @phy_addr: mii phy address - * - * If the adapter is link-on, set the auto-negotiate enable/reset bit. - * autong_complete should be set to 0 when starting auto-negotiation. - * autong_complete should be set to 1 if we didn't start auto-negotiation. - * sis900_timer will wait for link on again if autong_complete = 0. - */ - -static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - int i = 0; - u32 status; - - for (i = 0; i < 2; i++) - status = mdio_read(net_dev, phy_addr, MII_STATUS); - - if (!(status & MII_STAT_LINK)){ - if(netif_msg_link(sis_priv)) - printk(KERN_INFO "%s: Media Link Off\n", net_dev->name); - sis_priv->autong_complete = 1; - netif_carrier_off(net_dev); - return; - } - - /* (Re)start AutoNegotiate */ - mdio_write(net_dev, phy_addr, MII_CONTROL, - MII_CNTL_AUTO | MII_CNTL_RST_AUTO); - sis_priv->autong_complete = 0; -} - - -/** - * sis900_read_mode - read media mode for sis900 internal phy - * @net_dev: the net device to read mode for - * @speed : the transmit speed to be determined - * @duplex : the duplex mode to be determined - * - * The capability of remote end will be put in mii register autorec - * after auto-negotiation. Use AND operation to get the upper bound - * of speed and duplex between two ends. - */ - -static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - struct mii_phy *phy = sis_priv->mii; - int phy_addr = sis_priv->cur_phy; - u32 status; - u16 autoadv, autorec; - int i; - - for (i = 0; i < 2; i++) - status = mdio_read(net_dev, phy_addr, MII_STATUS); - - if (!(status & MII_STAT_LINK)) - return; - - /* AutoNegotiate completed */ - autoadv = mdio_read(net_dev, phy_addr, MII_ANADV); - autorec = mdio_read(net_dev, phy_addr, MII_ANLPAR); - status = autoadv & autorec; - - *speed = HW_SPEED_10_MBPS; - *duplex = FDX_CAPABLE_HALF_SELECTED; - - if (status & (MII_NWAY_TX | MII_NWAY_TX_FDX)) - *speed = HW_SPEED_100_MBPS; - if (status & ( MII_NWAY_TX_FDX | MII_NWAY_T_FDX)) - *duplex = FDX_CAPABLE_FULL_SELECTED; - - sis_priv->autong_complete = 1; - - /* Workaround for Realtek RTL8201 PHY issue */ - if ((phy->phy_id0 == 0x0000) && ((phy->phy_id1 & 0xFFF0) == 0x8200)) { - if (mdio_read(net_dev, phy_addr, MII_CONTROL) & MII_CNTL_FDX) - *duplex = FDX_CAPABLE_FULL_SELECTED; - if (mdio_read(net_dev, phy_addr, 0x0019) & 0x01) - *speed = HW_SPEED_100_MBPS; - } - - if(netif_msg_link(sis_priv)) - printk(KERN_INFO "%s: Media Link On %s %s-duplex\n", - net_dev->name, - *speed == HW_SPEED_100_MBPS ? - "100mbps" : "10mbps", - *duplex == FDX_CAPABLE_FULL_SELECTED ? - "full" : "half"); -} - -/** - * sis900_tx_timeout - sis900 transmit timeout routine - * @net_dev: the net device to transmit - * - * print transmit timeout status - * disable interrupts and do some tasks - */ - -static void sis900_tx_timeout(struct net_device *net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - long ioaddr = net_dev->base_addr; - unsigned long flags; - int i; - - if(netif_msg_tx_err(sis_priv)) - printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x\n", - net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr)); - - /* Disable interrupts by clearing the interrupt mask. */ - outl(0x0000, ioaddr + imr); - - /* use spinlock to prevent interrupt handler accessing buffer ring */ - spin_lock_irqsave(&sis_priv->lock, flags); - - /* discard unsent packets */ - sis_priv->dirty_tx = sis_priv->cur_tx = 0; - for (i = 0; i < NUM_TX_DESC; i++) { - struct sk_buff *skb = sis_priv->tx_skbuff[i]; - - if (skb) { - pci_unmap_single(sis_priv->pci_dev, - sis_priv->tx_ring[i].bufptr, skb->len, - PCI_DMA_TODEVICE); - dev_kfree_skb_irq(skb); - sis_priv->tx_skbuff[i] = NULL; - sis_priv->tx_ring[i].cmdsts = 0; - sis_priv->tx_ring[i].bufptr = 0; - net_dev->stats.tx_dropped++; - } - } - sis_priv->tx_full = 0; - netif_wake_queue(net_dev); - - spin_unlock_irqrestore(&sis_priv->lock, flags); - - net_dev->trans_start = jiffies; /* prevent tx timeout */ - - /* load Transmit Descriptor Register */ - outl(sis_priv->tx_ring_dma, ioaddr + txdp); - - /* Enable all known interrupts by setting the interrupt mask. */ - outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr); -} - -/** - * sis900_start_xmit - sis900 start transmit routine - * @skb: socket buffer pointer to put the data being transmitted - * @net_dev: the net device to transmit with - * - * Set the transmit buffer descriptor, - * and write TxENA to enable transmit state machine. - * tell upper layer if the buffer is full - */ - -static netdev_tx_t -sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - long ioaddr = net_dev->base_addr; - unsigned int entry; - unsigned long flags; - unsigned int index_cur_tx, index_dirty_tx; - unsigned int count_dirty_tx; - - /* Don't transmit data before the complete of auto-negotiation */ - if(!sis_priv->autong_complete){ - netif_stop_queue(net_dev); - return NETDEV_TX_BUSY; - } - - spin_lock_irqsave(&sis_priv->lock, flags); - - /* Calculate the next Tx descriptor entry. */ - entry = sis_priv->cur_tx % NUM_TX_DESC; - sis_priv->tx_skbuff[entry] = skb; - - /* set the transmit buffer descriptor and enable Transmit State Machine */ - sis_priv->tx_ring[entry].bufptr = pci_map_single(sis_priv->pci_dev, - skb->data, skb->len, PCI_DMA_TODEVICE); - sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len); - outl(TxENA | inl(ioaddr + cr), ioaddr + cr); - - sis_priv->cur_tx ++; - index_cur_tx = sis_priv->cur_tx; - index_dirty_tx = sis_priv->dirty_tx; - - for (count_dirty_tx = 0; index_cur_tx != index_dirty_tx; index_dirty_tx++) - count_dirty_tx ++; - - if (index_cur_tx == index_dirty_tx) { - /* dirty_tx is met in the cycle of cur_tx, buffer full */ - sis_priv->tx_full = 1; - netif_stop_queue(net_dev); - } else if (count_dirty_tx < NUM_TX_DESC) { - /* Typical path, tell upper layer that more transmission is possible */ - netif_start_queue(net_dev); - } else { - /* buffer full, tell upper layer no more transmission */ - sis_priv->tx_full = 1; - netif_stop_queue(net_dev); - } - - spin_unlock_irqrestore(&sis_priv->lock, flags); - - if (netif_msg_tx_queued(sis_priv)) - printk(KERN_DEBUG "%s: Queued Tx packet at %p size %d " - "to slot %d.\n", - net_dev->name, skb->data, (int)skb->len, entry); - - return NETDEV_TX_OK; -} - -/** - * sis900_interrupt - sis900 interrupt handler - * @irq: the irq number - * @dev_instance: the client data object - * - * The interrupt handler does all of the Rx thread work, - * and cleans up after the Tx thread - */ - -static irqreturn_t sis900_interrupt(int irq, void *dev_instance) -{ - struct net_device *net_dev = dev_instance; - struct sis900_private *sis_priv = netdev_priv(net_dev); - int boguscnt = max_interrupt_work; - long ioaddr = net_dev->base_addr; - u32 status; - unsigned int handled = 0; - - spin_lock (&sis_priv->lock); - - do { - status = inl(ioaddr + isr); - - if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0) - /* nothing intresting happened */ - break; - handled = 1; - - /* why dow't we break after Tx/Rx case ?? keyword: full-duplex */ - if (status & (RxORN | RxERR | RxOK)) - /* Rx interrupt */ - sis900_rx(net_dev); - - if (status & (TxURN | TxERR | TxIDLE)) - /* Tx interrupt */ - sis900_finish_xmit(net_dev); - - /* something strange happened !!! */ - if (status & HIBERR) { - if(netif_msg_intr(sis_priv)) - printk(KERN_INFO "%s: Abnormal interrupt, " - "status %#8.8x.\n", net_dev->name, status); - break; - } - if (--boguscnt < 0) { - if(netif_msg_intr(sis_priv)) - printk(KERN_INFO "%s: Too much work at interrupt, " - "interrupt status = %#8.8x.\n", - net_dev->name, status); - break; - } - } while (1); - - if(netif_msg_intr(sis_priv)) - printk(KERN_DEBUG "%s: exiting interrupt, " - "interrupt status = 0x%#8.8x.\n", - net_dev->name, inl(ioaddr + isr)); - - spin_unlock (&sis_priv->lock); - return IRQ_RETVAL(handled); -} - -/** - * sis900_rx - sis900 receive routine - * @net_dev: the net device which receives data - * - * Process receive interrupt events, - * put buffer to higher layer and refill buffer pool - * Note: This function is called by interrupt handler, - * don't do "too much" work here - */ - -static int sis900_rx(struct net_device *net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - long ioaddr = net_dev->base_addr; - unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC; - u32 rx_status = sis_priv->rx_ring[entry].cmdsts; - int rx_work_limit; - - if (netif_msg_rx_status(sis_priv)) - printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d " - "status:0x%8.8x\n", - sis_priv->cur_rx, sis_priv->dirty_rx, rx_status); - rx_work_limit = sis_priv->dirty_rx + NUM_RX_DESC - sis_priv->cur_rx; - - while (rx_status & OWN) { - unsigned int rx_size; - unsigned int data_size; - - if (--rx_work_limit < 0) - break; - - data_size = rx_status & DSIZE; - rx_size = data_size - CRC_SIZE; - -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) - /* ``TOOLONG'' flag means jumbo packet received. */ - if ((rx_status & TOOLONG) && data_size <= MAX_FRAME_SIZE) - rx_status &= (~ ((unsigned int)TOOLONG)); -#endif - - if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) { - /* corrupted packet received */ - if (netif_msg_rx_err(sis_priv)) - printk(KERN_DEBUG "%s: Corrupted packet " - "received, buffer status = 0x%8.8x/%d.\n", - net_dev->name, rx_status, data_size); - net_dev->stats.rx_errors++; - if (rx_status & OVERRUN) - net_dev->stats.rx_over_errors++; - if (rx_status & (TOOLONG|RUNT)) - net_dev->stats.rx_length_errors++; - if (rx_status & (RXISERR | FAERR)) - net_dev->stats.rx_frame_errors++; - if (rx_status & CRCERR) - net_dev->stats.rx_crc_errors++; - /* reset buffer descriptor state */ - sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; - } else { - struct sk_buff * skb; - struct sk_buff * rx_skb; - - pci_unmap_single(sis_priv->pci_dev, - sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE, - PCI_DMA_FROMDEVICE); - - /* refill the Rx buffer, what if there is not enough - * memory for new socket buffer ?? */ - if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { - /* - * Not enough memory to refill the buffer - * so we need to recycle the old one so - * as to avoid creating a memory hole - * in the rx ring - */ - skb = sis_priv->rx_skbuff[entry]; - net_dev->stats.rx_dropped++; - goto refill_rx_ring; - } - - /* This situation should never happen, but due to - some unknown bugs, it is possible that - we are working on NULL sk_buff :-( */ - if (sis_priv->rx_skbuff[entry] == NULL) { - if (netif_msg_rx_err(sis_priv)) - printk(KERN_WARNING "%s: NULL pointer " - "encountered in Rx ring\n" - "cur_rx:%4.4d, dirty_rx:%4.4d\n", - net_dev->name, sis_priv->cur_rx, - sis_priv->dirty_rx); - dev_kfree_skb(skb); - break; - } - - /* give the socket buffer to upper layers */ - rx_skb = sis_priv->rx_skbuff[entry]; - skb_put(rx_skb, rx_size); - rx_skb->protocol = eth_type_trans(rx_skb, net_dev); - netif_rx(rx_skb); - - /* some network statistics */ - if ((rx_status & BCAST) == MCAST) - net_dev->stats.multicast++; - net_dev->stats.rx_bytes += rx_size; - net_dev->stats.rx_packets++; - sis_priv->dirty_rx++; -refill_rx_ring: - sis_priv->rx_skbuff[entry] = skb; - sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; - sis_priv->rx_ring[entry].bufptr = - pci_map_single(sis_priv->pci_dev, skb->data, - RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - } - sis_priv->cur_rx++; - entry = sis_priv->cur_rx % NUM_RX_DESC; - rx_status = sis_priv->rx_ring[entry].cmdsts; - } // while - - /* refill the Rx buffer, what if the rate of refilling is slower - * than consuming ?? */ - for (; sis_priv->cur_rx != sis_priv->dirty_rx; sis_priv->dirty_rx++) { - struct sk_buff *skb; - - entry = sis_priv->dirty_rx % NUM_RX_DESC; - - if (sis_priv->rx_skbuff[entry] == NULL) { - if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { - /* not enough memory for skbuff, this makes a - * "hole" on the buffer ring, it is not clear - * how the hardware will react to this kind - * of degenerated buffer */ - if (netif_msg_rx_err(sis_priv)) - printk(KERN_INFO "%s: Memory squeeze, " - "deferring packet.\n", - net_dev->name); - net_dev->stats.rx_dropped++; - break; - } - sis_priv->rx_skbuff[entry] = skb; - sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; - sis_priv->rx_ring[entry].bufptr = - pci_map_single(sis_priv->pci_dev, skb->data, - RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - } - } - /* re-enable the potentially idle receive state matchine */ - outl(RxENA | inl(ioaddr + cr), ioaddr + cr ); - - return 0; -} - -/** - * sis900_finish_xmit - finish up transmission of packets - * @net_dev: the net device to be transmitted on - * - * Check for error condition and free socket buffer etc - * schedule for more transmission as needed - * Note: This function is called by interrupt handler, - * don't do "too much" work here - */ - -static void sis900_finish_xmit (struct net_device *net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - - for (; sis_priv->dirty_tx != sis_priv->cur_tx; sis_priv->dirty_tx++) { - struct sk_buff *skb; - unsigned int entry; - u32 tx_status; - - entry = sis_priv->dirty_tx % NUM_TX_DESC; - tx_status = sis_priv->tx_ring[entry].cmdsts; - - if (tx_status & OWN) { - /* The packet is not transmitted yet (owned by hardware) ! - * Note: the interrupt is generated only when Tx Machine - * is idle, so this is an almost impossible case */ - break; - } - - if (tx_status & (ABORT | UNDERRUN | OWCOLL)) { - /* packet unsuccessfully transmitted */ - if (netif_msg_tx_err(sis_priv)) - printk(KERN_DEBUG "%s: Transmit " - "error, Tx status %8.8x.\n", - net_dev->name, tx_status); - net_dev->stats.tx_errors++; - if (tx_status & UNDERRUN) - net_dev->stats.tx_fifo_errors++; - if (tx_status & ABORT) - net_dev->stats.tx_aborted_errors++; - if (tx_status & NOCARRIER) - net_dev->stats.tx_carrier_errors++; - if (tx_status & OWCOLL) - net_dev->stats.tx_window_errors++; - } else { - /* packet successfully transmitted */ - net_dev->stats.collisions += (tx_status & COLCNT) >> 16; - net_dev->stats.tx_bytes += tx_status & DSIZE; - net_dev->stats.tx_packets++; - } - /* Free the original skb. */ - skb = sis_priv->tx_skbuff[entry]; - pci_unmap_single(sis_priv->pci_dev, - sis_priv->tx_ring[entry].bufptr, skb->len, - PCI_DMA_TODEVICE); - dev_kfree_skb_irq(skb); - sis_priv->tx_skbuff[entry] = NULL; - sis_priv->tx_ring[entry].bufptr = 0; - sis_priv->tx_ring[entry].cmdsts = 0; - } - - if (sis_priv->tx_full && netif_queue_stopped(net_dev) && - sis_priv->cur_tx - sis_priv->dirty_tx < NUM_TX_DESC - 4) { - /* The ring is no longer full, clear tx_full and schedule - * more transmission by netif_wake_queue(net_dev) */ - sis_priv->tx_full = 0; - netif_wake_queue (net_dev); - } -} - -/** - * sis900_close - close sis900 device - * @net_dev: the net device to be closed - * - * Disable interrupts, stop the Tx and Rx Status Machine - * free Tx and RX socket buffer - */ - -static int sis900_close(struct net_device *net_dev) -{ - long ioaddr = net_dev->base_addr; - struct sis900_private *sis_priv = netdev_priv(net_dev); - struct sk_buff *skb; - int i; - - netif_stop_queue(net_dev); - - /* Disable interrupts by clearing the interrupt mask. */ - outl(0x0000, ioaddr + imr); - outl(0x0000, ioaddr + ier); - - /* Stop the chip's Tx and Rx Status Machine */ - outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr); - - del_timer(&sis_priv->timer); - - free_irq(net_dev->irq, net_dev); - - /* Free Tx and RX skbuff */ - for (i = 0; i < NUM_RX_DESC; i++) { - skb = sis_priv->rx_skbuff[i]; - if (skb) { - pci_unmap_single(sis_priv->pci_dev, - sis_priv->rx_ring[i].bufptr, - RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - dev_kfree_skb(skb); - sis_priv->rx_skbuff[i] = NULL; - } - } - for (i = 0; i < NUM_TX_DESC; i++) { - skb = sis_priv->tx_skbuff[i]; - if (skb) { - pci_unmap_single(sis_priv->pci_dev, - sis_priv->tx_ring[i].bufptr, skb->len, - PCI_DMA_TODEVICE); - dev_kfree_skb(skb); - sis_priv->tx_skbuff[i] = NULL; - } - } - - /* Green! Put the chip in low-power mode. */ - - return 0; -} - -/** - * sis900_get_drvinfo - Return information about driver - * @net_dev: the net device to probe - * @info: container for info returned - * - * Process ethtool command such as "ehtool -i" to show information - */ - -static void sis900_get_drvinfo(struct net_device *net_dev, - struct ethtool_drvinfo *info) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - - strcpy (info->driver, SIS900_MODULE_NAME); - strcpy (info->version, SIS900_DRV_VERSION); - strcpy (info->bus_info, pci_name(sis_priv->pci_dev)); -} - -static u32 sis900_get_msglevel(struct net_device *net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - return sis_priv->msg_enable; -} - -static void sis900_set_msglevel(struct net_device *net_dev, u32 value) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - sis_priv->msg_enable = value; -} - -static u32 sis900_get_link(struct net_device *net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - return mii_link_ok(&sis_priv->mii_info); -} - -static int sis900_get_settings(struct net_device *net_dev, - struct ethtool_cmd *cmd) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - spin_lock_irq(&sis_priv->lock); - mii_ethtool_gset(&sis_priv->mii_info, cmd); - spin_unlock_irq(&sis_priv->lock); - return 0; -} - -static int sis900_set_settings(struct net_device *net_dev, - struct ethtool_cmd *cmd) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - int rt; - spin_lock_irq(&sis_priv->lock); - rt = mii_ethtool_sset(&sis_priv->mii_info, cmd); - spin_unlock_irq(&sis_priv->lock); - return rt; -} - -static int sis900_nway_reset(struct net_device *net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - return mii_nway_restart(&sis_priv->mii_info); -} - -/** - * sis900_set_wol - Set up Wake on Lan registers - * @net_dev: the net device to probe - * @wol: container for info passed to the driver - * - * Process ethtool command "wol" to setup wake on lan features. - * SiS900 supports sending WoL events if a correct packet is received, - * but there is no simple way to filter them to only a subset (broadcast, - * multicast, unicast or arp). - */ - -static int sis900_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - long pmctrl_addr = net_dev->base_addr + pmctrl; - u32 cfgpmcsr = 0, pmctrl_bits = 0; - - if (wol->wolopts == 0) { - pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr); - cfgpmcsr &= ~PME_EN; - pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr); - outl(pmctrl_bits, pmctrl_addr); - if (netif_msg_wol(sis_priv)) - printk(KERN_DEBUG "%s: Wake on LAN disabled\n", net_dev->name); - return 0; - } - - if (wol->wolopts & (WAKE_MAGICSECURE | WAKE_UCAST | WAKE_MCAST - | WAKE_BCAST | WAKE_ARP)) - return -EINVAL; - - if (wol->wolopts & WAKE_MAGIC) - pmctrl_bits |= MAGICPKT; - if (wol->wolopts & WAKE_PHY) - pmctrl_bits |= LINKON; - - outl(pmctrl_bits, pmctrl_addr); - - pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr); - cfgpmcsr |= PME_EN; - pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr); - if (netif_msg_wol(sis_priv)) - printk(KERN_DEBUG "%s: Wake on LAN enabled\n", net_dev->name); - - return 0; -} - -static void sis900_get_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol) -{ - long pmctrl_addr = net_dev->base_addr + pmctrl; - u32 pmctrl_bits; - - pmctrl_bits = inl(pmctrl_addr); - if (pmctrl_bits & MAGICPKT) - wol->wolopts |= WAKE_MAGIC; - if (pmctrl_bits & LINKON) - wol->wolopts |= WAKE_PHY; - - wol->supported = (WAKE_PHY | WAKE_MAGIC); -} - -static const struct ethtool_ops sis900_ethtool_ops = { - .get_drvinfo = sis900_get_drvinfo, - .get_msglevel = sis900_get_msglevel, - .set_msglevel = sis900_set_msglevel, - .get_link = sis900_get_link, - .get_settings = sis900_get_settings, - .set_settings = sis900_set_settings, - .nway_reset = sis900_nway_reset, - .get_wol = sis900_get_wol, - .set_wol = sis900_set_wol -}; - -/** - * mii_ioctl - process MII i/o control command - * @net_dev: the net device to command for - * @rq: parameter for command - * @cmd: the i/o command - * - * Process MII command like read/write MII register - */ - -static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - struct mii_ioctl_data *data = if_mii(rq); - - switch(cmd) { - case SIOCGMIIPHY: /* Get address of MII PHY in use. */ - data->phy_id = sis_priv->mii->phy_addr; - /* Fall Through */ - - case SIOCGMIIREG: /* Read MII PHY register. */ - data->val_out = mdio_read(net_dev, data->phy_id & 0x1f, data->reg_num & 0x1f); - return 0; - - case SIOCSMIIREG: /* Write MII PHY register. */ - mdio_write(net_dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); - return 0; - default: - return -EOPNOTSUPP; - } -} - -/** - * sis900_set_config - Set media type by net_device.set_config - * @dev: the net device for media type change - * @map: ifmap passed by ifconfig - * - * Set media type to 10baseT, 100baseT or 0(for auto) by ifconfig - * we support only port changes. All other runtime configuration - * changes will be ignored - */ - -static int sis900_set_config(struct net_device *dev, struct ifmap *map) -{ - struct sis900_private *sis_priv = netdev_priv(dev); - struct mii_phy *mii_phy = sis_priv->mii; - - u16 status; - - if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { - /* we switch on the ifmap->port field. I couldn't find anything - * like a definition or standard for the values of that field. - * I think the meaning of those values is device specific. But - * since I would like to change the media type via the ifconfig - * command I use the definition from linux/netdevice.h - * (which seems to be different from the ifport(pcmcia) definition) */ - switch(map->port){ - case IF_PORT_UNKNOWN: /* use auto here */ - dev->if_port = map->port; - /* we are going to change the media type, so the Link - * will be temporary down and we need to reflect that - * here. When the Link comes up again, it will be - * sensed by the sis_timer procedure, which also does - * all the rest for us */ - netif_carrier_off(dev); - - /* read current state */ - status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL); - - /* enable auto negotiation and reset the negotioation - * (I don't really know what the auto negatiotiation - * reset really means, but it sounds for me right to - * do one here) */ - mdio_write(dev, mii_phy->phy_addr, - MII_CONTROL, status | MII_CNTL_AUTO | MII_CNTL_RST_AUTO); - - break; - - case IF_PORT_10BASET: /* 10BaseT */ - dev->if_port = map->port; - - /* we are going to change the media type, so the Link - * will be temporary down and we need to reflect that - * here. When the Link comes up again, it will be - * sensed by the sis_timer procedure, which also does - * all the rest for us */ - netif_carrier_off(dev); - - /* set Speed to 10Mbps */ - /* read current state */ - status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL); - - /* disable auto negotiation and force 10MBit mode*/ - mdio_write(dev, mii_phy->phy_addr, - MII_CONTROL, status & ~(MII_CNTL_SPEED | - MII_CNTL_AUTO)); - break; - - case IF_PORT_100BASET: /* 100BaseT */ - case IF_PORT_100BASETX: /* 100BaseTx */ - dev->if_port = map->port; - - /* we are going to change the media type, so the Link - * will be temporary down and we need to reflect that - * here. When the Link comes up again, it will be - * sensed by the sis_timer procedure, which also does - * all the rest for us */ - netif_carrier_off(dev); - - /* set Speed to 100Mbps */ - /* disable auto negotiation and enable 100MBit Mode */ - status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL); - mdio_write(dev, mii_phy->phy_addr, - MII_CONTROL, (status & ~MII_CNTL_SPEED) | - MII_CNTL_SPEED); - - break; - - case IF_PORT_10BASE2: /* 10Base2 */ - case IF_PORT_AUI: /* AUI */ - case IF_PORT_100BASEFX: /* 100BaseFx */ - /* These Modes are not supported (are they?)*/ - return -EOPNOTSUPP; - break; - - default: - return -EINVAL; - } - } - return 0; -} - -/** - * sis900_mcast_bitnr - compute hashtable index - * @addr: multicast address - * @revision: revision id of chip - * - * SiS 900 uses the most sigificant 7 bits to index a 128 bits multicast - * hash table, which makes this function a little bit different from other drivers - * SiS 900 B0 & 635 M/B uses the most significat 8 bits to index 256 bits - * multicast hash table. - */ - -static inline u16 sis900_mcast_bitnr(u8 *addr, u8 revision) -{ - - u32 crc = ether_crc(6, addr); - - /* leave 8 or 7 most siginifant bits */ - if ((revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV)) - return (int)(crc >> 24); - else - return (int)(crc >> 25); -} - -/** - * set_rx_mode - Set SiS900 receive mode - * @net_dev: the net device to be set - * - * Set SiS900 receive mode for promiscuous, multicast, or broadcast mode. - * And set the appropriate multicast filter. - * Multicast hash table changes from 128 to 256 bits for 635M/B & 900B0. - */ - -static void set_rx_mode(struct net_device *net_dev) -{ - long ioaddr = net_dev->base_addr; - struct sis900_private *sis_priv = netdev_priv(net_dev); - u16 mc_filter[16] = {0}; /* 256/128 bits multicast hash table */ - int i, table_entries; - u32 rx_mode; - - /* 635 Hash Table entries = 256(2^16) */ - if((sis_priv->chipset_rev >= SIS635A_900_REV) || - (sis_priv->chipset_rev == SIS900B_900_REV)) - table_entries = 16; - else - table_entries = 8; - - if (net_dev->flags & IFF_PROMISC) { - /* Accept any kinds of packets */ - rx_mode = RFPromiscuous; - for (i = 0; i < table_entries; i++) - mc_filter[i] = 0xffff; - } else if ((netdev_mc_count(net_dev) > multicast_filter_limit) || - (net_dev->flags & IFF_ALLMULTI)) { - /* too many multicast addresses or accept all multicast packet */ - rx_mode = RFAAB | RFAAM; - for (i = 0; i < table_entries; i++) - mc_filter[i] = 0xffff; - } else { - /* Accept Broadcast packet, destination address matchs our - * MAC address, use Receive Filter to reject unwanted MCAST - * packets */ - struct netdev_hw_addr *ha; - rx_mode = RFAAB; - - netdev_for_each_mc_addr(ha, net_dev) { - unsigned int bit_nr; - - bit_nr = sis900_mcast_bitnr(ha->addr, - sis_priv->chipset_rev); - mc_filter[bit_nr >> 4] |= (1 << (bit_nr & 0xf)); - } - } - - /* update Multicast Hash Table in Receive Filter */ - for (i = 0; i < table_entries; i++) { - /* why plus 0x04 ??, That makes the correct value for hash table. */ - outl((u32)(0x00000004+i) << RFADDR_shift, ioaddr + rfcr); - outl(mc_filter[i], ioaddr + rfdr); - } - - outl(RFEN | rx_mode, ioaddr + rfcr); - - /* sis900 is capable of looping back packets at MAC level for - * debugging purpose */ - if (net_dev->flags & IFF_LOOPBACK) { - u32 cr_saved; - /* We must disable Tx/Rx before setting loopback mode */ - cr_saved = inl(ioaddr + cr); - outl(cr_saved | TxDIS | RxDIS, ioaddr + cr); - /* enable loopback */ - outl(inl(ioaddr + txcfg) | TxMLB, ioaddr + txcfg); - outl(inl(ioaddr + rxcfg) | RxATX, ioaddr + rxcfg); - /* restore cr */ - outl(cr_saved, ioaddr + cr); - } -} - -/** - * sis900_reset - Reset sis900 MAC - * @net_dev: the net device to reset - * - * reset sis900 MAC and wait until finished - * reset through command register - * change backoff algorithm for 900B0 & 635 M/B - */ - -static void sis900_reset(struct net_device *net_dev) -{ - struct sis900_private *sis_priv = netdev_priv(net_dev); - long ioaddr = net_dev->base_addr; - int i = 0; - u32 status = TxRCMP | RxRCMP; - - outl(0, ioaddr + ier); - outl(0, ioaddr + imr); - outl(0, ioaddr + rfcr); - - outl(RxRESET | TxRESET | RESET | inl(ioaddr + cr), ioaddr + cr); - - /* Check that the chip has finished the reset. */ - while (status && (i++ < 1000)) { - status ^= (inl(isr + ioaddr) & status); - } - - if( (sis_priv->chipset_rev >= SIS635A_900_REV) || - (sis_priv->chipset_rev == SIS900B_900_REV) ) - outl(PESEL | RND_CNT, ioaddr + cfg); - else - outl(PESEL, ioaddr + cfg); -} - -/** - * sis900_remove - Remove sis900 device - * @pci_dev: the pci device to be removed - * - * remove and release SiS900 net device - */ - -static void __devexit sis900_remove(struct pci_dev *pci_dev) -{ - struct net_device *net_dev = pci_get_drvdata(pci_dev); - struct sis900_private *sis_priv = netdev_priv(net_dev); - struct mii_phy *phy = NULL; - - while (sis_priv->first_mii) { - phy = sis_priv->first_mii; - sis_priv->first_mii = phy->next; - kfree(phy); - } - - pci_free_consistent(pci_dev, RX_TOTAL_SIZE, sis_priv->rx_ring, - sis_priv->rx_ring_dma); - pci_free_consistent(pci_dev, TX_TOTAL_SIZE, sis_priv->tx_ring, - sis_priv->tx_ring_dma); - unregister_netdev(net_dev); - free_netdev(net_dev); - pci_release_regions(pci_dev); - pci_set_drvdata(pci_dev, NULL); -} - -#ifdef CONFIG_PM - -static int sis900_suspend(struct pci_dev *pci_dev, pm_message_t state) -{ - struct net_device *net_dev = pci_get_drvdata(pci_dev); - long ioaddr = net_dev->base_addr; - - if(!netif_running(net_dev)) - return 0; - - netif_stop_queue(net_dev); - netif_device_detach(net_dev); - - /* Stop the chip's Tx and Rx Status Machine */ - outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr); - - pci_set_power_state(pci_dev, PCI_D3hot); - pci_save_state(pci_dev); - - return 0; -} - -static int sis900_resume(struct pci_dev *pci_dev) -{ - struct net_device *net_dev = pci_get_drvdata(pci_dev); - struct sis900_private *sis_priv = netdev_priv(net_dev); - long ioaddr = net_dev->base_addr; - - if(!netif_running(net_dev)) - return 0; - pci_restore_state(pci_dev); - pci_set_power_state(pci_dev, PCI_D0); - - sis900_init_rxfilter(net_dev); - - sis900_init_tx_ring(net_dev); - sis900_init_rx_ring(net_dev); - - set_rx_mode(net_dev); - - netif_device_attach(net_dev); - netif_start_queue(net_dev); - - /* Workaround for EDB */ - sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); - - /* Enable all known interrupts by setting the interrupt mask. */ - outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr); - outl(RxENA | inl(ioaddr + cr), ioaddr + cr); - outl(IE, ioaddr + ier); - - sis900_check_mode(net_dev, sis_priv->mii); - - return 0; -} -#endif /* CONFIG_PM */ - -static struct pci_driver sis900_pci_driver = { - .name = SIS900_MODULE_NAME, - .id_table = sis900_pci_tbl, - .probe = sis900_probe, - .remove = __devexit_p(sis900_remove), -#ifdef CONFIG_PM - .suspend = sis900_suspend, - .resume = sis900_resume, -#endif /* CONFIG_PM */ -}; - -static int __init sis900_init_module(void) -{ -/* when a module, this is printed whether or not devices are found in probe */ -#ifdef MODULE - printk(version); -#endif - - return pci_register_driver(&sis900_pci_driver); -} - -static void __exit sis900_cleanup_module(void) -{ - pci_unregister_driver(&sis900_pci_driver); -} - -module_init(sis900_init_module); -module_exit(sis900_cleanup_module); - diff --git a/drivers/net/sis900.h b/drivers/net/sis900.h deleted file mode 100644 index 150511a922ef..000000000000 --- a/drivers/net/sis900.h +++ /dev/null @@ -1,329 +0,0 @@ -/* sis900.h Definitions for SiS ethernet controllers including 7014/7016 and 900 - * Copyright 1999 Silicon Integrated System Corporation - * References: - * SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support, - * preliminary Rev. 1.0 Jan. 14, 1998 - * SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support, - * preliminary Rev. 1.0 Nov. 10, 1998 - * SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution, - * preliminary Rev. 1.0 Jan. 18, 1998 - * http://www.sis.com.tw/support/databook.htm - */ - -/* - * SiS 7016 and SiS 900 ethernet controller registers - */ - -/* The I/O extent, SiS 900 needs 256 bytes of io address */ -#define SIS900_TOTAL_SIZE 0x100 - -/* Symbolic offsets to registers. */ -enum sis900_registers { - cr=0x0, //Command Register - cfg=0x4, //Configuration Register - mear=0x8, //EEPROM Access Register - ptscr=0xc, //PCI Test Control Register - isr=0x10, //Interrupt Status Register - imr=0x14, //Interrupt Mask Register - ier=0x18, //Interrupt Enable Register - epar=0x18, //Enhanced PHY Access Register - txdp=0x20, //Transmit Descriptor Pointer Register - txcfg=0x24, //Transmit Configuration Register - rxdp=0x30, //Receive Descriptor Pointer Register - rxcfg=0x34, //Receive Configuration Register - flctrl=0x38, //Flow Control Register - rxlen=0x3c, //Receive Packet Length Register - rfcr=0x48, //Receive Filter Control Register - rfdr=0x4C, //Receive Filter Data Register - pmctrl=0xB0, //Power Management Control Register - pmer=0xB4 //Power Management Wake-up Event Register -}; - -/* Symbolic names for bits in various registers */ -enum sis900_command_register_bits { - RELOAD = 0x00000400, ACCESSMODE = 0x00000200,/* ET */ - RESET = 0x00000100, SWI = 0x00000080, RxRESET = 0x00000020, - TxRESET = 0x00000010, RxDIS = 0x00000008, RxENA = 0x00000004, - TxDIS = 0x00000002, TxENA = 0x00000001 -}; - -enum sis900_configuration_register_bits { - DESCRFMT = 0x00000100 /* 7016 specific */, REQALG = 0x00000080, - SB = 0x00000040, POW = 0x00000020, EXD = 0x00000010, - PESEL = 0x00000008, LPM = 0x00000004, BEM = 0x00000001, - /* 635 & 900B Specific */ - RND_CNT = 0x00000400, FAIR_BACKOFF = 0x00000200, - EDB_MASTER_EN = 0x00002000 -}; - -enum sis900_eeprom_access_reigster_bits { - MDC = 0x00000040, MDDIR = 0x00000020, MDIO = 0x00000010, /* 7016 specific */ - EECS = 0x00000008, EECLK = 0x00000004, EEDO = 0x00000002, - EEDI = 0x00000001 -}; - -enum sis900_interrupt_register_bits { - WKEVT = 0x10000000, TxPAUSEEND = 0x08000000, TxPAUSE = 0x04000000, - TxRCMP = 0x02000000, RxRCMP = 0x01000000, DPERR = 0x00800000, - SSERR = 0x00400000, RMABT = 0x00200000, RTABT = 0x00100000, - RxSOVR = 0x00010000, HIBERR = 0x00008000, SWINT = 0x00001000, - MIBINT = 0x00000800, TxURN = 0x00000400, TxIDLE = 0x00000200, - TxERR = 0x00000100, TxDESC = 0x00000080, TxOK = 0x00000040, - RxORN = 0x00000020, RxIDLE = 0x00000010, RxEARLY = 0x00000008, - RxERR = 0x00000004, RxDESC = 0x00000002, RxOK = 0x00000001 -}; - -enum sis900_interrupt_enable_reigster_bits { - IE = 0x00000001 -}; - -/* maximum dma burst for transmission and receive */ -#define MAX_DMA_RANGE 7 /* actually 0 means MAXIMUM !! */ -#define TxMXDMA_shift 20 -#define RxMXDMA_shift 20 - -enum sis900_tx_rx_dma{ - DMA_BURST_512 = 0, DMA_BURST_64 = 5 -}; - -/* transmit FIFO thresholds */ -#define TX_FILL_THRESH 16 /* 1/4 FIFO size */ -#define TxFILLT_shift 8 -#define TxDRNT_shift 0 -#define TxDRNT_100 48 /* 3/4 FIFO size */ -#define TxDRNT_10 16 /* 1/2 FIFO size */ - -enum sis900_transmit_config_register_bits { - TxCSI = 0x80000000, TxHBI = 0x40000000, TxMLB = 0x20000000, - TxATP = 0x10000000, TxIFG = 0x0C000000, TxFILLT = 0x00003F00, - TxDRNT = 0x0000003F -}; - -/* recevie FIFO thresholds */ -#define RxDRNT_shift 1 -#define RxDRNT_100 16 /* 1/2 FIFO size */ -#define RxDRNT_10 24 /* 3/4 FIFO size */ - -enum sis900_reveive_config_register_bits { - RxAEP = 0x80000000, RxARP = 0x40000000, RxATX = 0x10000000, - RxAJAB = 0x08000000, RxDRNT = 0x0000007F -}; - -#define RFAA_shift 28 -#define RFADDR_shift 16 - -enum sis900_receive_filter_control_register_bits { - RFEN = 0x80000000, RFAAB = 0x40000000, RFAAM = 0x20000000, - RFAAP = 0x10000000, RFPromiscuous = (RFAAB|RFAAM|RFAAP) -}; - -enum sis900_reveive_filter_data_mask { - RFDAT = 0x0000FFFF -}; - -/* EEPROM Addresses */ -enum sis900_eeprom_address { - EEPROMSignature = 0x00, EEPROMVendorID = 0x02, EEPROMDeviceID = 0x03, - EEPROMMACAddr = 0x08, EEPROMChecksum = 0x0b -}; - -/* The EEPROM commands include the alway-set leading bit. Refer to NM93Cxx datasheet */ -enum sis900_eeprom_command { - EEread = 0x0180, EEwrite = 0x0140, EEerase = 0x01C0, - EEwriteEnable = 0x0130, EEwriteDisable = 0x0100, - EEeraseAll = 0x0120, EEwriteAll = 0x0110, - EEaddrMask = 0x013F, EEcmdShift = 16 -}; - -/* For SiS962 or SiS963, request the eeprom software access */ -enum sis96x_eeprom_command { - EEREQ = 0x00000400, EEDONE = 0x00000200, EEGNT = 0x00000100 -}; - -/* PCI Registers */ -enum sis900_pci_registers { - CFGPMC = 0x40, - CFGPMCSR = 0x44 -}; - -/* Power management capabilities bits */ -enum sis900_cfgpmc_register_bits { - PMVER = 0x00070000, - DSI = 0x00100000, - PMESP = 0xf8000000 -}; - -enum sis900_pmesp_bits { - PME_D0 = 0x1, - PME_D1 = 0x2, - PME_D2 = 0x4, - PME_D3H = 0x8, - PME_D3C = 0x10 -}; - -/* Power management control/status bits */ -enum sis900_cfgpmcsr_register_bits { - PMESTS = 0x00004000, - PME_EN = 0x00000100, // Power management enable - PWR_STA = 0x00000003 // Current power state -}; - -/* Wake-on-LAN support. */ -enum sis900_power_management_control_register_bits { - LINKLOSS = 0x00000001, - LINKON = 0x00000002, - MAGICPKT = 0x00000400, - ALGORITHM = 0x00000800, - FRM1EN = 0x00100000, - FRM2EN = 0x00200000, - FRM3EN = 0x00400000, - FRM1ACS = 0x01000000, - FRM2ACS = 0x02000000, - FRM3ACS = 0x04000000, - WAKEALL = 0x40000000, - GATECLK = 0x80000000 -}; - -/* Management Data I/O (mdio) frame */ -#define MIIread 0x6000 -#define MIIwrite 0x5002 -#define MIIpmdShift 7 -#define MIIregShift 2 -#define MIIcmdLen 16 -#define MIIcmdShift 16 - -/* Buffer Descriptor Status*/ -enum sis900_buffer_status { - OWN = 0x80000000, MORE = 0x40000000, INTR = 0x20000000, - SUPCRC = 0x10000000, INCCRC = 0x10000000, - OK = 0x08000000, DSIZE = 0x00000FFF -}; -/* Status for TX Buffers */ -enum sis900_tx_buffer_status { - ABORT = 0x04000000, UNDERRUN = 0x02000000, NOCARRIER = 0x01000000, - DEFERD = 0x00800000, EXCDEFER = 0x00400000, OWCOLL = 0x00200000, - EXCCOLL = 0x00100000, COLCNT = 0x000F0000 -}; - -enum sis900_rx_bufer_status { - OVERRUN = 0x02000000, DEST = 0x00800000, BCAST = 0x01800000, - MCAST = 0x01000000, UNIMATCH = 0x00800000, TOOLONG = 0x00400000, - RUNT = 0x00200000, RXISERR = 0x00100000, CRCERR = 0x00080000, - FAERR = 0x00040000, LOOPBK = 0x00020000, RXCOL = 0x00010000 -}; - -/* MII register offsets */ -enum mii_registers { - MII_CONTROL = 0x0000, MII_STATUS = 0x0001, MII_PHY_ID0 = 0x0002, - MII_PHY_ID1 = 0x0003, MII_ANADV = 0x0004, MII_ANLPAR = 0x0005, - MII_ANEXT = 0x0006 -}; - -/* mii registers specific to SiS 900 */ -enum sis_mii_registers { - MII_CONFIG1 = 0x0010, MII_CONFIG2 = 0x0011, MII_STSOUT = 0x0012, - MII_MASK = 0x0013, MII_RESV = 0x0014 -}; - -/* mii registers specific to ICS 1893 */ -enum ics_mii_registers { - MII_EXTCTRL = 0x0010, MII_QPDSTS = 0x0011, MII_10BTOP = 0x0012, - MII_EXTCTRL2 = 0x0013 -}; - -/* mii registers specific to AMD 79C901 */ -enum amd_mii_registers { - MII_STATUS_SUMMARY = 0x0018 -}; - -/* MII Control register bit definitions. */ -enum mii_control_register_bits { - MII_CNTL_FDX = 0x0100, MII_CNTL_RST_AUTO = 0x0200, - MII_CNTL_ISOLATE = 0x0400, MII_CNTL_PWRDWN = 0x0800, - MII_CNTL_AUTO = 0x1000, MII_CNTL_SPEED = 0x2000, - MII_CNTL_LPBK = 0x4000, MII_CNTL_RESET = 0x8000 -}; - -/* MII Status register bit */ -enum mii_status_register_bits { - MII_STAT_EXT = 0x0001, MII_STAT_JAB = 0x0002, - MII_STAT_LINK = 0x0004, MII_STAT_CAN_AUTO = 0x0008, - MII_STAT_FAULT = 0x0010, MII_STAT_AUTO_DONE = 0x0020, - MII_STAT_CAN_T = 0x0800, MII_STAT_CAN_T_FDX = 0x1000, - MII_STAT_CAN_TX = 0x2000, MII_STAT_CAN_TX_FDX = 0x4000, - MII_STAT_CAN_T4 = 0x8000 -}; - -#define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */ -#define MII_ID1_MODEL 0x03F0 /* model number */ -#define MII_ID1_REV 0x000F /* model number */ - -/* MII NWAY Register Bits ... - valid for the ANAR (Auto-Negotiation Advertisement) and - ANLPAR (Auto-Negotiation Link Partner) registers */ -enum mii_nway_register_bits { - MII_NWAY_NODE_SEL = 0x001f, MII_NWAY_CSMA_CD = 0x0001, - MII_NWAY_T = 0x0020, MII_NWAY_T_FDX = 0x0040, - MII_NWAY_TX = 0x0080, MII_NWAY_TX_FDX = 0x0100, - MII_NWAY_T4 = 0x0200, MII_NWAY_PAUSE = 0x0400, - MII_NWAY_RF = 0x2000, MII_NWAY_ACK = 0x4000, - MII_NWAY_NP = 0x8000 -}; - -enum mii_stsout_register_bits { - MII_STSOUT_LINK_FAIL = 0x4000, - MII_STSOUT_SPD = 0x0080, MII_STSOUT_DPLX = 0x0040 -}; - -enum mii_stsics_register_bits { - MII_STSICS_SPD = 0x8000, MII_STSICS_DPLX = 0x4000, - MII_STSICS_LINKSTS = 0x0001 -}; - -enum mii_stssum_register_bits { - MII_STSSUM_LINK = 0x0008, MII_STSSUM_DPLX = 0x0004, - MII_STSSUM_AUTO = 0x0002, MII_STSSUM_SPD = 0x0001 -}; - -enum sis900_revision_id { - SIS630A_900_REV = 0x80, SIS630E_900_REV = 0x81, - SIS630S_900_REV = 0x82, SIS630EA1_900_REV = 0x83, - SIS630ET_900_REV = 0x84, SIS635A_900_REV = 0x90, - SIS96x_900_REV = 0X91, SIS900B_900_REV = 0x03 -}; - -enum sis630_revision_id { - SIS630A0 = 0x00, SIS630A1 = 0x01, - SIS630B0 = 0x10, SIS630B1 = 0x11 -}; - -#define FDX_CAPABLE_DUPLEX_UNKNOWN 0 -#define FDX_CAPABLE_HALF_SELECTED 1 -#define FDX_CAPABLE_FULL_SELECTED 2 - -#define HW_SPEED_UNCONFIG 0 -#define HW_SPEED_HOME 1 -#define HW_SPEED_10_MBPS 10 -#define HW_SPEED_100_MBPS 100 -#define HW_SPEED_DEFAULT (HW_SPEED_100_MBPS) - -#define CRC_SIZE 4 -#define MAC_HEADER_SIZE 14 - -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) -#define MAX_FRAME_SIZE (1518 + 4) -#else -#define MAX_FRAME_SIZE 1518 -#endif /* CONFIG_VLAN_802_1Q */ - -#define TX_BUF_SIZE (MAX_FRAME_SIZE+18) -#define RX_BUF_SIZE (MAX_FRAME_SIZE+18) - -#define NUM_TX_DESC 16 /* Number of Tx descriptor registers. */ -#define NUM_RX_DESC 16 /* Number of Rx descriptor registers. */ -#define TX_TOTAL_SIZE NUM_TX_DESC*sizeof(BufferDesc) -#define RX_TOTAL_SIZE NUM_RX_DESC*sizeof(BufferDesc) - -/* PCI stuff, should be move to pci.h */ -#define SIS630_VENDOR_ID 0x1039 -#define SIS630_DEVICE_ID 0x0630 -- cgit v1.2.3