From e67f04c9187b76c9824c31b4aeb7b79dd36cb735 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 13 Aug 2014 13:52:40 +0200 Subject: spi: cadence: Remove .owner field for driver There is no need to init .owner field. Based on the patch from Peter Griffin "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Michal Simek Signed-off-by: Mark Brown --- drivers/spi/spi-cadence.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 562ff83debd9..7b811e38c7ad 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -677,7 +677,6 @@ static struct platform_driver cdns_spi_driver = { .remove = cdns_spi_remove, .driver = { .name = CDNS_SPI_NAME, - .owner = THIS_MODULE, .of_match_table = cdns_spi_of_match, .pm = &cdns_spi_dev_pm_ops, }, -- cgit v1.2.3 From 9f5b8b4f56dd194fd33021810636879036d2acdd Mon Sep 17 00:00:00 2001 From: Nick Krause Date: Wed, 6 Aug 2014 13:53:17 -0400 Subject: spi: omap-100k: Remove unused definitions Remove unused definition which cause the following warnings drivers/spi/spi-omap-100k.c:73:0: warning: "WRITE" redefined [enabled by default] include/linux/fs.h:193:0: note: this is the location of the previous definition drivers/spi/spi-omap-100k.c:74:0: warning: "READ" redefined [enabled by default] include/linux/fs.h:192:0: note: this is the location of the previous definition Signed-off-by: Nick Krause Acked-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-omap-100k.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c index 5e91858f6f01..fb522765ce5a 100644 --- a/drivers/spi/spi-omap-100k.c +++ b/drivers/spi/spi-omap-100k.c @@ -70,10 +70,6 @@ #define SPI_STATUS_WE (1UL << 1) #define SPI_STATUS_RD (1UL << 0) -#define WRITE 0 -#define READ 1 - - /* use PIO for small transfers, avoiding DMA setup/teardown overhead and * cache operations; better heuristics consider wordsize and bitrate. */ -- cgit v1.2.3 From d64b472678e17ef9afb251577f4f544793483fa9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:58:59 +0200 Subject: spi: rspi: Remove unneeded semicolon Introduced by commit 426ef76dd8a394a0e04d096941cd9acb49539a3e ("spi: rspi: Add DT support"). Reported-by: kbuild test robot Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index ad87a98f8f68..a4d8d3cf2912 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -1084,7 +1084,7 @@ static int rspi_probe(struct platform_device *pdev) master->num_chipselect = rspi_pd->num_chipselect; else master->num_chipselect = 2; /* default */ - }; + } /* ops parameter check */ if (!ops->set_config_register) { -- cgit v1.2.3 From 43937455c9bf294cffc2f25c4a4d0a1b9bbd88e6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:59:00 +0200 Subject: spi: rspi: Use devm_kasprintf() Use the devm_kasprintf() helper function instead of open coding error-prone buffer handling and string formatting. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index a4d8d3cf2912..aa1c6a893570 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -1046,12 +1046,11 @@ static int rspi_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler, const char *suffix, void *dev_id) { - const char *base = dev_name(dev); - size_t len = strlen(base) + strlen(suffix) + 2; - char *name = devm_kzalloc(dev, len, GFP_KERNEL); + const char *name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s", + dev_name(dev), suffix); if (!name) return -ENOMEM; - snprintf(name, len, "%s:%s", base, suffix); + return devm_request_irq(dev, irq, handler, 0, name, dev_id); } -- cgit v1.2.3 From a30b95a7d81cfc3442beb5a9635f22b19c97bbfc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:59:01 +0200 Subject: spi: rspi: Configure DMA slave bus width to 8 bit The new Renesas R-Car Gen2 DMA Controller driver (rcar-dmac) requires explicit configuration of the DMA slave bus width. Hardcode the DMA transfer size to 1 byte for both directions, as that's the only supported configuration (16-bit DMA support was removed in commit 9c5de2c1754c2bb3c69c4d7bf0d0edc0a61d8232 ("spi: rspi: Remove unused 16-bit DMA support")). Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index aa1c6a893570..6a4eb2d7f644 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -919,10 +919,13 @@ static struct dma_chan *rspi_request_dma_chan(struct device *dev, memset(&cfg, 0, sizeof(cfg)); cfg.slave_id = id; cfg.direction = dir; - if (dir == DMA_MEM_TO_DEV) + if (dir == DMA_MEM_TO_DEV) { cfg.dst_addr = port_addr; - else + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } else { cfg.src_addr = port_addr; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } ret = dmaengine_slave_config(chan, &cfg); if (ret) { -- cgit v1.2.3 From e825b8dd2b363e9134006fb141825518a11b2bf4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:59:02 +0200 Subject: spi: rspi: Add DT support to DMA setup Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 6a4eb2d7f644..1da609e4491d 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -909,10 +909,11 @@ static struct dma_chan *rspi_request_dma_chan(struct device *dev, dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - chan = dma_request_channel(mask, shdma_chan_filter, - (void *)(unsigned long)id); + chan = dma_request_slave_channel_compat(mask, shdma_chan_filter, + (void *)(unsigned long)id, dev, + dir == DMA_MEM_TO_DEV ? "tx" : "rx"); if (!chan) { - dev_warn(dev, "dma_request_channel failed\n"); + dev_warn(dev, "dma_request_slave_channel_compat failed\n"); return NULL; } @@ -941,22 +942,30 @@ static int rspi_request_dma(struct device *dev, struct spi_master *master, const struct resource *res) { const struct rspi_plat_data *rspi_pd = dev_get_platdata(dev); + unsigned int dma_tx_id, dma_rx_id; + + if (dev->of_node) { + /* In the OF case we will get the slave IDs from the DT */ + dma_tx_id = 0; + dma_rx_id = 0; + } else if (rspi_pd && rspi_pd->dma_tx_id && rspi_pd->dma_rx_id) { + dma_tx_id = rspi_pd->dma_tx_id; + dma_rx_id = rspi_pd->dma_rx_id; + } else { + /* The driver assumes no error. */ + return 0; + } - if (!rspi_pd || !rspi_pd->dma_rx_id || !rspi_pd->dma_tx_id) - return 0; /* The driver assumes no error. */ - - master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, - rspi_pd->dma_rx_id, + master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, dma_tx_id, res->start + RSPI_SPDR); - if (!master->dma_rx) + if (!master->dma_tx) return -ENODEV; - master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, - rspi_pd->dma_tx_id, + master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, dma_rx_id, res->start + RSPI_SPDR); - if (!master->dma_tx) { - dma_release_channel(master->dma_rx); - master->dma_rx = NULL; + if (!master->dma_rx) { + dma_release_channel(master->dma_tx); + master->dma_tx = NULL; return -ENODEV; } -- cgit v1.2.3 From 52fba2b85d30075490db023642632032371505c2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:59:04 +0200 Subject: spi: sh-msiof: Configure DMA slave bus width The new Renesas R-Car Gen2 DMA Controller driver (rcar-dmac) requires explicit configuration of the DMA slave bus width. Hardcode the DMA transfer size to 4 bytes, as MSIOF DMA is limited to 32-bit words. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 887c2084130f..b19cbb4cb4a0 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -987,10 +987,13 @@ static struct dma_chan *sh_msiof_request_dma_chan(struct device *dev, memset(&cfg, 0, sizeof(cfg)); cfg.slave_id = id; cfg.direction = dir; - if (dir == DMA_MEM_TO_DEV) + if (dir == DMA_MEM_TO_DEV) { cfg.dst_addr = port_addr; - else + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + } else { cfg.src_addr = port_addr; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + } ret = dmaengine_slave_config(chan, &cfg); if (ret) { -- cgit v1.2.3 From a6be4de6a24cbef6209e3a0fcddaee9e312a1f63 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2014 14:59:05 +0200 Subject: spi: sh-msiof: Add DT support to DMA setup Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index b19cbb4cb4a0..811a42dba92a 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -977,10 +977,11 @@ static struct dma_chan *sh_msiof_request_dma_chan(struct device *dev, dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - chan = dma_request_channel(mask, shdma_chan_filter, - (void *)(unsigned long)id); + chan = dma_request_slave_channel_compat(mask, shdma_chan_filter, + (void *)(unsigned long)id, dev, + dir == DMA_MEM_TO_DEV ? "tx" : "rx"); if (!chan) { - dev_warn(dev, "dma_request_channel failed\n"); + dev_warn(dev, "dma_request_slave_channel_compat failed\n"); return NULL; } @@ -1010,12 +1011,22 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p) struct platform_device *pdev = p->pdev; struct device *dev = &pdev->dev; const struct sh_msiof_spi_info *info = dev_get_platdata(dev); + unsigned int dma_tx_id, dma_rx_id; const struct resource *res; struct spi_master *master; struct device *tx_dev, *rx_dev; - if (!info || !info->dma_tx_id || !info->dma_rx_id) - return 0; /* The driver assumes no error */ + if (dev->of_node) { + /* In the OF case we will get the slave IDs from the DT */ + dma_tx_id = 0; + dma_rx_id = 0; + } else if (info && info->dma_tx_id && info->dma_rx_id) { + dma_tx_id = info->dma_tx_id; + dma_rx_id = info->dma_rx_id; + } else { + /* The driver assumes no error */ + return 0; + } /* The DMA engine uses the second register set, if present */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); @@ -1024,13 +1035,13 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p) master = p->master; master->dma_tx = sh_msiof_request_dma_chan(dev, DMA_MEM_TO_DEV, - info->dma_tx_id, + dma_tx_id, res->start + TFDR); if (!master->dma_tx) return -ENODEV; master->dma_rx = sh_msiof_request_dma_chan(dev, DMA_DEV_TO_MEM, - info->dma_rx_id, + dma_rx_id, res->start + RFDR); if (!master->dma_rx) goto free_tx_chan; -- cgit v1.2.3 From a5e7c719fe257214aeda3dadb502a4cf58209a61 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 7 Aug 2014 14:07:42 +0200 Subject: spi: sh-msiof: Return early in sh_msiof_dma_once() where possible Reported-by: Laurent Pinchart Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 811a42dba92a..daaa868e959f 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -642,18 +642,14 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx, desc_rx = dmaengine_prep_slave_single(p->master->dma_rx, p->rx_dma_addr, len, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc_rx) { - ret = -EAGAIN; - goto no_dma_rx; - } + if (!desc_rx) + return -EAGAIN; desc_rx->callback = sh_msiof_dma_complete; desc_rx->callback_param = p; cookie = dmaengine_submit(desc_rx); - if (dma_submit_error(cookie)) { - ret = cookie; - goto no_dma_rx; - } + if (dma_submit_error(cookie)) + return cookie; } if (tx) { @@ -738,7 +734,6 @@ no_dma_tx: if (rx) dmaengine_terminate_all(p->master->dma_rx); sh_msiof_write(p, IER, 0); -no_dma_rx: return ret; } -- cgit v1.2.3 From 7a9f957b395fc08edc47620c01e8bb5b798caddb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 7 Aug 2014 14:07:43 +0200 Subject: spi: sh-msiof: Fix transmit-only DMA transfers Fix tx/rx mixup, which broke transmit-only transfers. Introduced by commit 4240305f7cbdc7782aa8bc40cc702775d9ac0839 ("spi: sh-msiof: Fix leaking of unused DMA descriptors"). Reported-by: Laurent Pinchart Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index daaa868e959f..1165d418340f 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -689,9 +689,9 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx, reinit_completion(&p->done); /* Now start DMA */ - if (tx) - dma_async_issue_pending(p->master->dma_rx); if (rx) + dma_async_issue_pending(p->master->dma_rx); + if (tx) dma_async_issue_pending(p->master->dma_tx); ret = sh_msiof_spi_start(p, rx); -- cgit v1.2.3 From 9c0b8fd1a5493d0c5ab2fb147e758ca556e80863 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 13 Aug 2014 13:52:39 +0200 Subject: spi: xilinx: Remove .owner field for driver There is no need to init .owner field. Based on the patch from Peter Griffin "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Michal Simek Signed-off-by: Mark Brown --- drivers/spi/spi-xilinx.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index 4d8efb16573d..79bd84f43430 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -471,7 +471,6 @@ static struct platform_driver xilinx_spi_driver = { .remove = xilinx_spi_remove, .driver = { .name = XILINX_SPI_NAME, - .owner = THIS_MODULE, .of_match_table = xilinx_spi_of_match, }, }; -- cgit v1.2.3 From afa93c9017fd48d4d5265854c75f5fcde0871548 Mon Sep 17 00:00:00 2001 From: "Chew, Chiau Ee" Date: Fri, 25 Jul 2014 01:10:54 +0800 Subject: spi/pxa2xx-pci: Add common clock framework support in PCI glue layer SPI PXA2XX core layer has dependency on common clock framework to obtain information on host supported clock rate. Thus, we setup the clock device in the PCI glue layer to enable PCI mode host pass in the clock rate information. Signed-off-by: Chew, Chiau Ee Acked-by: Kweh, Hock Leong Acked-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 2 +- drivers/spi/spi-pxa2xx-pci.c | 21 ++++++++++++++++++++- 2 files changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 62e2242ad7e0..aa005cbf2e50 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -380,7 +380,7 @@ config SPI_PXA2XX additional documentation can be found a Documentation/spi/pxa2xx. config SPI_PXA2XX_PCI - def_tristate SPI_PXA2XX && PCI + def_tristate SPI_PXA2XX && PCI && COMMON_CLK config SPI_ROCKCHIP tristate "Rockchip SPI controller driver" diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index c1865c92ccb9..20ebbc764693 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -7,6 +7,8 @@ #include #include #include +#include +#include enum { PORT_CE4100, @@ -21,6 +23,7 @@ struct pxa_spi_info { int tx_chan_id; int rx_slave_id; int rx_chan_id; + unsigned long max_clk_rate; }; static struct pxa_spi_info spi_info_configs[] = { @@ -32,6 +35,7 @@ static struct pxa_spi_info spi_info_configs[] = { .tx_chan_id = -1, .rx_slave_id = -1, .rx_chan_id = -1, + .max_clk_rate = 3686400, }, [PORT_BYT] = { .type = LPSS_SSP, @@ -41,6 +45,7 @@ static struct pxa_spi_info spi_info_configs[] = { .tx_chan_id = 0, .rx_slave_id = 1, .rx_chan_id = 1, + .max_clk_rate = 50000000, }, }; @@ -53,6 +58,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, struct pxa2xx_spi_master spi_pdata; struct ssp_device *ssp; struct pxa_spi_info *c; + char buf[40]; ret = pcim_enable_device(dev); if (ret) @@ -84,6 +90,12 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn; ssp->type = c->type; + snprintf(buf, sizeof(buf), "pxa2xx-spi.%d", ssp->port_id); + ssp->clk = clk_register_fixed_rate(&dev->dev, buf , NULL, + CLK_IS_ROOT, c->max_clk_rate); + if (IS_ERR(ssp->clk)) + return PTR_ERR(ssp->clk); + memset(&pi, 0, sizeof(pi)); pi.parent = &dev->dev; pi.name = "pxa2xx-spi"; @@ -92,8 +104,10 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, pi.size_data = sizeof(spi_pdata); pdev = platform_device_register_full(&pi); - if (IS_ERR(pdev)) + if (IS_ERR(pdev)) { + clk_unregister(ssp->clk); return PTR_ERR(pdev); + } pci_set_drvdata(dev, pdev); @@ -103,8 +117,13 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, static void pxa2xx_spi_pci_remove(struct pci_dev *dev) { struct platform_device *pdev = pci_get_drvdata(dev); + struct pxa2xx_spi_master *spi_pdata; + + spi_pdata = dev_get_platdata(&pdev->dev); platform_device_unregister(pdev); + clk_unregister(spi_pdata->ssp.clk); + pci_set_drvdata(dev, NULL); } static const struct pci_device_id pxa2xx_spi_pci_devices[] = { -- cgit v1.2.3 From c99428d035908b9c0b8be452f9b091bc5e090256 Mon Sep 17 00:00:00 2001 From: Xiubo Li Date: Mon, 18 Aug 2014 15:48:20 +0800 Subject: spi: fsl-dspi: Convert to use regmap framework's endianness method. Signed-off-by: Xiubo Li Acked-by: Chao Fu Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 5021ddf03f60..ebc4d1fd76e2 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -493,9 +493,6 @@ static int dspi_probe(struct platform_device *pdev) } dspi_regmap_config.lock_arg = dspi; - dspi_regmap_config.val_format_endian = - of_property_read_bool(np, "big-endian") - ? REGMAP_ENDIAN_BIG : REGMAP_ENDIAN_DEFAULT; dspi->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dspi", base, &dspi_regmap_config); if (IS_ERR(dspi->regmap)) { -- cgit v1.2.3 From 0fc6a323e19173fc89e17940bb1e19447aa0224e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sun, 17 Aug 2014 18:33:38 +0200 Subject: spi: bcm53xx: driver for SPI controller on Broadcom bcma SoC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Broadcom 53xx ARM SoCs use bcma bus that contains various cores (AKA devices). If board has a serial flash, it's connected over SPI and the bcma bus includes a SPI controller. Example log from such a board: bus0: Found chip with id 53010, rev 0x00 and package 0x02 (...) bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0) This patch adds a bcma driver for SPI core, it registers SPI master controller and "bcm53xxspiflash" SPI device. Signed-off-by: Rafał Miłecki Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 6 + drivers/spi/Makefile | 1 + drivers/spi/spi-bcm53xx.c | 295 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/spi/spi-bcm53xx.h | 72 +++++++++++ 4 files changed, 374 insertions(+) create mode 100644 drivers/spi/spi-bcm53xx.c create mode 100644 drivers/spi/spi-bcm53xx.h (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 62e2242ad7e0..b14b829fb45c 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -112,6 +112,12 @@ config SPI_AU1550 If you say yes to this option, support will be included for the PSC SPI controller found on Au1550, Au1200 and Au1300 series. +config SPI_BCM53XX + tristate "Broadcom BCM53xx SPI controller" + depends on ARCH_BCM_5301X + help + Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs. + config SPI_BCM63XX tristate "Broadcom BCM63xx SPI controller" depends on BCM63XX diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 762da0741148..78f24ca36fcf 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o obj-$(CONFIG_SPI_ATH79) += spi-ath79.o obj-$(CONFIG_SPI_AU1550) += spi-au1550.o obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o +obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c new file mode 100644 index 000000000000..48f13dfe7cf0 --- /dev/null +++ b/drivers/spi/spi-bcm53xx.c @@ -0,0 +1,295 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include + +#include "spi-bcm53xx.h" + +#define BCM53XXSPI_MAX_SPI_BAUD 13500000 /* 216 MHz? */ + +/* The longest observed required wait was 19 ms */ +#define BCM53XXSPI_SPE_TIMEOUT_MS 80 + +struct bcm53xxspi { + struct bcma_device *core; + struct spi_master *master; + + size_t read_offset; +}; + +static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset) +{ + return bcma_read32(b53spi->core, offset); +} + +static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset, + u32 value) +{ + bcma_write32(b53spi->core, offset, value); +} + +static inline unsigned int bcm53xxspi_calc_timeout(size_t len) +{ + /* Do some magic calculation based on length and buad. Add 10% and 1. */ + return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1; +} + +static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms) +{ + unsigned long deadline; + u32 tmp; + + /* SPE bit has to be 0 before we read MSPI STATUS */ + deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000; + do { + tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); + if (!(tmp & B53SPI_MSPI_SPCR2_SPE)) + break; + udelay(5); + } while (!time_after_eq(jiffies, deadline)); + + if (tmp & B53SPI_MSPI_SPCR2_SPE) + goto spi_timeout; + + /* Check status */ + deadline = jiffies + timeout_ms * HZ / 1000; + do { + tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS); + if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) { + bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0); + return 0; + } + + cpu_relax(); + udelay(100); + } while (!time_after_eq(jiffies, deadline)); + +spi_timeout: + bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0); + + pr_err("Timeout waiting for SPI to be ready!\n"); + + return -EBUSY; +} + +static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf, + size_t len, bool cont) +{ + u32 tmp; + int i; + + for (i = 0; i < len; i++) { + /* Transmit Register File MSB */ + bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2), + (unsigned int)w_buf[i]); + } + + for (i = 0; i < len; i++) { + tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL | + B53SPI_CDRAM_PCS_DSCK; + if (!cont && i == len - 1) + tmp &= ~B53SPI_CDRAM_CONT; + tmp &= ~0x1; + /* Command Register File */ + bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp); + } + + /* Set queue pointers */ + bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0); + bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1); + + if (cont) + bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1); + + /* Start SPI transfer */ + tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); + tmp |= B53SPI_MSPI_SPCR2_SPE; + if (cont) + tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD; + bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp); + + /* Wait for SPI to finish */ + bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len)); + + if (!cont) + bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0); + + b53spi->read_offset = len; +} + +static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf, + size_t len, bool cont) +{ + u32 tmp; + int i; + + for (i = 0; i < b53spi->read_offset + len; i++) { + tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL | + B53SPI_CDRAM_PCS_DSCK; + if (!cont && i == b53spi->read_offset + len - 1) + tmp &= ~B53SPI_CDRAM_CONT; + tmp &= ~0x1; + /* Command Register File */ + bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp); + } + + /* Set queue pointers */ + bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0); + bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, + b53spi->read_offset + len - 1); + + if (cont) + bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1); + + /* Start SPI transfer */ + tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); + tmp |= B53SPI_MSPI_SPCR2_SPE; + if (cont) + tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD; + bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp); + + /* Wait for SPI to finish */ + bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len)); + + if (!cont) + bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0); + + for (i = 0; i < len; ++i) { + int offset = b53spi->read_offset + i; + + /* Data stored in the transmit register file LSB */ + r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2)); + } + + b53spi->read_offset = 0; +} + +static int bcm53xxspi_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *t) +{ + struct bcm53xxspi *b53spi = spi_master_get_devdata(master); + u8 *buf; + size_t left; + + if (t->tx_buf) { + buf = (u8 *)t->tx_buf; + left = t->len; + while (left) { + size_t to_write = min_t(size_t, 16, left); + bool cont = left - to_write > 0; + + bcm53xxspi_buf_write(b53spi, buf, to_write, cont); + left -= to_write; + buf += to_write; + } + } + + if (t->rx_buf) { + buf = (u8 *)t->rx_buf; + left = t->len; + while (left) { + size_t to_read = min_t(size_t, 16 - b53spi->read_offset, + left); + bool cont = left - to_read > 0; + + bcm53xxspi_buf_read(b53spi, buf, to_read, cont); + left -= to_read; + buf += to_read; + } + } + + return 0; +} + +/************************************************** + * BCMA + **************************************************/ + +struct spi_board_info bcm53xx_info = { + .modalias = "bcm53xxspiflash", +}; + +static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS), + BCMA_CORETABLE_END +}; +MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl); + +static int bcm53xxspi_bcma_probe(struct bcma_device *core) +{ + struct bcm53xxspi *b53spi; + struct spi_master *master; + int err; + + if (core->bus->drv_cc.core->id.rev != 42) { + pr_err("SPI on SoC with unsupported ChipCommon rev\n"); + return -ENOTSUPP; + } + + master = spi_alloc_master(&core->dev, sizeof(*b53spi)); + if (!master) + return -ENOMEM; + + b53spi = spi_master_get_devdata(master); + b53spi->master = master; + b53spi->core = core; + + master->transfer_one = bcm53xxspi_transfer_one; + + bcma_set_drvdata(core, b53spi); + + err = devm_spi_register_master(&core->dev, master); + if (err) { + spi_master_put(master); + bcma_set_drvdata(core, NULL); + goto out; + } + + /* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */ + spi_new_device(master, &bcm53xx_info); + +out: + return err; +} + +static void bcm53xxspi_bcma_remove(struct bcma_device *core) +{ + struct bcm53xxspi *b53spi = bcma_get_drvdata(core); + + spi_unregister_master(b53spi->master); +} + +static struct bcma_driver bcm53xxspi_bcma_driver = { + .name = KBUILD_MODNAME, + .id_table = bcm53xxspi_bcma_tbl, + .probe = bcm53xxspi_bcma_probe, + .remove = bcm53xxspi_bcma_remove, +}; + +/************************************************** + * Init & exit + **************************************************/ + +static int __init bcm53xxspi_module_init(void) +{ + int err = 0; + + err = bcma_driver_register(&bcm53xxspi_bcma_driver); + if (err) + pr_err("Failed to register bcma driver: %d\n", err); + + return err; +} + +static void __exit bcm53xxspi_module_exit(void) +{ + bcma_driver_unregister(&bcm53xxspi_bcma_driver); +} + +module_init(bcm53xxspi_module_init); +module_exit(bcm53xxspi_module_exit); diff --git a/drivers/spi/spi-bcm53xx.h b/drivers/spi/spi-bcm53xx.h new file mode 100644 index 000000000000..73575dfe6916 --- /dev/null +++ b/drivers/spi/spi-bcm53xx.h @@ -0,0 +1,72 @@ +#ifndef SPI_BCM53XX_H +#define SPI_BCM53XX_H + +#define B53SPI_BSPI_REVISION_ID 0x000 +#define B53SPI_BSPI_SCRATCH 0x004 +#define B53SPI_BSPI_MAST_N_BOOT_CTRL 0x008 +#define B53SPI_BSPI_BUSY_STATUS 0x00c +#define B53SPI_BSPI_INTR_STATUS 0x010 +#define B53SPI_BSPI_B0_STATUS 0x014 +#define B53SPI_BSPI_B0_CTRL 0x018 +#define B53SPI_BSPI_B1_STATUS 0x01c +#define B53SPI_BSPI_B1_CTRL 0x020 +#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL 0x024 +#define B53SPI_BSPI_FLEX_MODE_ENABLE 0x028 +#define B53SPI_BSPI_BITS_PER_CYCLE 0x02c +#define B53SPI_BSPI_BITS_PER_PHASE 0x030 +#define B53SPI_BSPI_CMD_AND_MODE_BYTE 0x034 +#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038 +#define B53SPI_BSPI_BSPI_XOR_VALUE 0x03c +#define B53SPI_BSPI_BSPI_XOR_ENABLE 0x040 +#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE 0x044 +#define B53SPI_BSPI_BSPI_PIO_IODIR 0x048 +#define B53SPI_BSPI_BSPI_PIO_DATA 0x04c + +/* RAF */ +#define B53SPI_RAF_START_ADDR 0x100 +#define B53SPI_RAF_NUM_WORDS 0x104 +#define B53SPI_RAF_CTRL 0x108 +#define B53SPI_RAF_FULLNESS 0x10c +#define B53SPI_RAF_WATERMARK 0x110 +#define B53SPI_RAF_STATUS 0x114 +#define B53SPI_RAF_READ_DATA 0x118 +#define B53SPI_RAF_WORD_CNT 0x11c +#define B53SPI_RAF_CURR_ADDR 0x120 + +/* MSPI */ +#define B53SPI_MSPI_SPCR0_LSB 0x200 +#define B53SPI_MSPI_SPCR0_MSB 0x204 +#define B53SPI_MSPI_SPCR1_LSB 0x208 +#define B53SPI_MSPI_SPCR1_MSB 0x20c +#define B53SPI_MSPI_NEWQP 0x210 +#define B53SPI_MSPI_ENDQP 0x214 +#define B53SPI_MSPI_SPCR2 0x218 +#define B53SPI_MSPI_SPCR2_SPE 0x00000040 +#define B53SPI_MSPI_SPCR2_CONT_AFTER_CMD 0x00000080 +#define B53SPI_MSPI_MSPI_STATUS 0x220 +#define B53SPI_MSPI_MSPI_STATUS_SPIF 0x00000001 +#define B53SPI_MSPI_CPTQP 0x224 +#define B53SPI_MSPI_TXRAM 0x240 /* 32 registers, up to 0x2b8 */ +#define B53SPI_MSPI_RXRAM 0x2c0 /* 32 registers, up to 0x33c */ +#define B53SPI_MSPI_CDRAM 0x340 /* 16 registers, up to 0x37c */ +#define B53SPI_CDRAM_PCS_PCS0 0x00000001 +#define B53SPI_CDRAM_PCS_PCS1 0x00000002 +#define B53SPI_CDRAM_PCS_PCS2 0x00000004 +#define B53SPI_CDRAM_PCS_PCS3 0x00000008 +#define B53SPI_CDRAM_PCS_DISABLE_ALL 0x0000000f +#define B53SPI_CDRAM_PCS_DSCK 0x00000010 +#define B53SPI_CDRAM_BITSE 0x00000040 +#define B53SPI_CDRAM_CONT 0x00000080 +#define B53SPI_MSPI_WRITE_LOCK 0x380 +#define B53SPI_MSPI_DISABLE_FLUSH_GEN 0x384 + +/* Interrupt */ +#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED 0x3a0 +#define B53SPI_INTR_RAF_LR_TRUNCATED 0x3a4 +#define B53SPI_INTR_RAF_LR_IMPATIENT 0x3a8 +#define B53SPI_INTR_RAF_LR_SESSION_DONE 0x3ac +#define B53SPI_INTR_RAF_LR_OVERREAD 0x3b0 +#define B53SPI_INTR_MSPI_DONE 0x3b4 +#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE 0x3b8 + +#endif /* SPI_BCM53XX_H */ -- cgit v1.2.3 From 38ec10f60d9ca3a7eb3a5b52500a67479296b86f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 16 Aug 2014 16:27:41 +0100 Subject: spi: Only call transfer_one() if we have buffers to transfer Client drivers such as the ChomeOS EC driver sometimes use transfers with no buffers and only a delay specified in order to allow a delay after the assertion of /CS. Rather than require controller drivers handle this noop case gracefully put checks in the core to ensure that we don't call into the controller for such transfers. Reported-by: Addy Ke Tested-by: Doug Anderson Reviewed-by: Doug Anderson Signed-off-by: Mark Brown --- drivers/spi/spi.c | 44 ++++++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index e0531baf2782..0edccc82ece5 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -789,27 +789,35 @@ static int spi_transfer_one_message(struct spi_master *master, list_for_each_entry(xfer, &msg->transfers, transfer_list) { trace_spi_transfer_start(msg, xfer); - reinit_completion(&master->xfer_completion); - - ret = master->transfer_one(master, msg->spi, xfer); - if (ret < 0) { - dev_err(&msg->spi->dev, - "SPI transfer failed: %d\n", ret); - goto out; - } + if (xfer->tx_buf || xfer->rx_buf) { + reinit_completion(&master->xfer_completion); + + ret = master->transfer_one(master, msg->spi, xfer); + if (ret < 0) { + dev_err(&msg->spi->dev, + "SPI transfer failed: %d\n", ret); + goto out; + } - if (ret > 0) { - ret = 0; - ms = xfer->len * 8 * 1000 / xfer->speed_hz; - ms += ms + 100; /* some tolerance */ + if (ret > 0) { + ret = 0; + ms = xfer->len * 8 * 1000 / xfer->speed_hz; + ms += ms + 100; /* some tolerance */ - ms = wait_for_completion_timeout(&master->xfer_completion, - msecs_to_jiffies(ms)); - } + ms = wait_for_completion_timeout(&master->xfer_completion, + msecs_to_jiffies(ms)); + } - if (ms == 0) { - dev_err(&msg->spi->dev, "SPI transfer timed out\n"); - msg->status = -ETIMEDOUT; + if (ms == 0) { + dev_err(&msg->spi->dev, + "SPI transfer timed out\n"); + msg->status = -ETIMEDOUT; + } + } else { + if (xfer->len) + dev_err(&msg->spi->dev, + "Bufferless transfer has length %u\n", + xfer->len); } trace_spi_transfer_stop(msg, xfer); -- cgit v1.2.3 From 468e0f47ed87350408ddac0e942fbf9a723408f9 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 19 Aug 2014 20:29:20 +0300 Subject: spi/pxa2xx-pci: remove unnecessary assignment There is no need to unset driver data pointer at removal stage. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx-pci.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 20ebbc764693..536c863bebf1 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -123,7 +123,6 @@ static void pxa2xx_spi_pci_remove(struct pci_dev *dev) platform_device_unregister(pdev); clk_unregister(spi_pdata->ssp.clk); - pci_set_drvdata(dev, NULL); } static const struct pci_device_id pxa2xx_spi_pci_devices[] = { -- cgit v1.2.3 From 6089af775a4b4ea5237648de650dda548cb841c2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 28 Aug 2014 10:10:19 +0200 Subject: spi: rspi: Add support for new R-Car Gen2 SoCs Add support for QSPI in: - r8a7792 (R-Car V2H) - r8a7793 (R-Car M2-N) - r8a7794 (R-Car E2) r8a7791 is now called "R-Car M2-W". Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 1da609e4491d..54bb0faec155 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -87,7 +87,7 @@ /* RSPI on SH only */ #define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */ #define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */ -/* QSPI on R-Car M2 only */ +/* QSPI on R-Car Gen2 only */ #define SPCR_WSWAP 0x02 /* Word Swap of read-data for DMAC */ #define SPCR_BSWAP 0x01 /* Byte Swap of read-data for DMAC */ -- cgit v1.2.3 From e221cc99bee4494a99aa8d8525cd7776092ced05 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 28 Aug 2014 10:11:03 +0200 Subject: spi: sh-msiof: Add support for new R-Car Gen2 SoCs Add support for MSIOF in: - r8a7792 (R-Car V2H) - r8a7793 (R-Car M2-N) - r8a7794 (R-Car E2) r8a7791 is now called "R-Car M2-W". Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 1165d418340f..3f365402fcc0 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -928,6 +928,9 @@ static const struct of_device_id sh_msiof_match[] = { { .compatible = "renesas,sh-mobile-msiof", .data = &sh_data }, { .compatible = "renesas,msiof-r8a7790", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7791", .data = &r8a779x_data }, + { .compatible = "renesas,msiof-r8a7792", .data = &r8a779x_data }, + { .compatible = "renesas,msiof-r8a7793", .data = &r8a779x_data }, + { .compatible = "renesas,msiof-r8a7794", .data = &r8a779x_data }, {}, }; MODULE_DEVICE_TABLE(of, sh_msiof_match); @@ -1219,6 +1222,9 @@ static struct platform_device_id spi_driver_ids[] = { { "spi_sh_msiof", (kernel_ulong_t)&sh_data }, { "spi_r8a7790_msiof", (kernel_ulong_t)&r8a779x_data }, { "spi_r8a7791_msiof", (kernel_ulong_t)&r8a779x_data }, + { "spi_r8a7792_msiof", (kernel_ulong_t)&r8a779x_data }, + { "spi_r8a7793_msiof", (kernel_ulong_t)&r8a779x_data }, + { "spi_r8a7794_msiof", (kernel_ulong_t)&r8a779x_data }, {}, }; MODULE_DEVICE_TABLE(platform, spi_driver_ids); -- cgit v1.2.3 From 050429a78b2dbec763a6bb5423ea5a1fcc9adca3 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 28 Aug 2014 18:21:09 +0900 Subject: spi: bcm53xx: make local symbol static Make local symbol static, because this is used only in this file. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-bcm53xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c index 48f13dfe7cf0..e6600f783385 100644 --- a/drivers/spi/spi-bcm53xx.c +++ b/drivers/spi/spi-bcm53xx.c @@ -210,7 +210,7 @@ static int bcm53xxspi_transfer_one(struct spi_master *master, * BCMA **************************************************/ -struct spi_board_info bcm53xx_info = { +static struct spi_board_info bcm53xx_info = { .modalias = "bcm53xxspiflash", }; -- cgit v1.2.3 From f59838a07ae5b26d2e050bc0227599932d22b549 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 29 Aug 2014 18:10:31 +0200 Subject: spi/drivers: Restrict COMPILE_TEST by HAS_DMA where needed commit dd1053a93fdc11d4 ("spi/drivers: Enable build of drivers with COMPILE_TEST") allows compile-testing drivers on platforms they're not meant for. However, adding "|| COMPILE_TEST" bypasses all other implicit dependencies assumed by the platform dependencies before, like HAS_DMA. If NO_DMA=y: drivers/built-in.o: In function `atmel_spi_dma_unmap_xfer': drivers/spi/spi-atmel.c:915: undefined reference to `dma_unmap_single' drivers/spi/spi-atmel.c:918: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `atmel_spi_next_xfer_data': drivers/spi/spi-atmel.c:690: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `atmel_spi_dma_map_xfer': drivers/spi/spi-atmel.c:890: undefined reference to `dma_map_single' drivers/spi/spi-atmel.c:893: undefined reference to `dma_mapping_error' drivers/spi/spi-atmel.c:897: undefined reference to `dma_map_single' drivers/spi/spi-atmel.c:900: undefined reference to `dma_mapping_error' drivers/spi/spi-atmel.c:902: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `atmel_spi_probe': drivers/spi/spi-atmel.c:1540: undefined reference to `dma_alloc_coherent' drivers/spi/spi-atmel.c:1623: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `atmel_spi_remove': drivers/spi/spi-atmel.c:1665: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ep93xx_spi_dma_finish': drivers/spi/spi-ep93xx.c:550: undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `ep93xx_spi_dma_prepare': drivers/spi/spi-ep93xx.c:516: undefined reference to `dma_map_sg' drivers/spi/spi-ep93xx.c:522: undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `omap2_mcspi_rx_dma': drivers/spi/spi-omap2-mcspi.c:475: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `omap2_mcspi_txrx_dma': drivers/spi/spi-omap2-mcspi.c:589: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `omap2_mcspi_transfer_one_message': drivers/spi/spi-omap2-mcspi.c:1202: undefined reference to `dma_map_single' drivers/spi/spi-omap2-mcspi.c:1204: undefined reference to `dma_mapping_error' drivers/spi/spi-omap2-mcspi.c:1211: undefined reference to `dma_map_single' drivers/spi/spi-omap2-mcspi.c:1213: undefined reference to `dma_mapping_error' drivers/spi/spi-omap2-mcspi.c:1217: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `tegra_spi_deinit_dma_param': drivers/spi/spi-tegra114.c:675: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `tegra_spi_copy_spi_rxbuf_to_client_rxbuf': drivers/spi/spi-tegra114.c:415: undefined reference to `dma_sync_single_for_cpu' drivers/spi/spi-tegra114.c:440: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `tegra_spi_copy_client_txbuf_to_spi_txbuf': drivers/spi/spi-tegra114.c:381: undefined reference to `dma_sync_single_for_cpu' drivers/spi/spi-tegra114.c:405: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `tegra_spi_start_dma_based_transfer': drivers/spi/spi-tegra114.c:543: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `tegra_slink_deinit_dma_param': drivers/spi/spi-tegra20-slink.c:705: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `tegra_slink_copy_spi_rxbuf_to_client_rxbuf': drivers/spi/spi-tegra20-slink.c:427: undefined reference to `dma_sync_single_for_cpu' drivers/spi/spi-tegra20-slink.c:452: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `tegra_slink_copy_client_txbuf_to_spi_txbuf': drivers/spi/spi-tegra20-slink.c:393: undefined reference to `dma_sync_single_for_cpu' drivers/spi/spi-tegra20-slink.c:417: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `tegra_slink_start_dma_based_transfer': drivers/spi/spi-tegra20-slink.c:561: undefined reference to `dma_sync_single_for_cpu' Add dependencies on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 62e2242ad7e0..db2a50b53f5b 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -69,6 +69,7 @@ config SPI_ATH79 config SPI_ATMEL tristate "Atmel SPI Controller" + depends on HAS_DMA depends on (ARCH_AT91 || AVR32 || COMPILE_TEST) help This selects a driver for the Atmel SPI Controller, present on @@ -185,6 +186,7 @@ config SPI_EFM32 config SPI_EP93XX tristate "Cirrus Logic EP93xx SPI controller" + depends on HAS_DMA depends on ARCH_EP93XX || COMPILE_TEST help This enables using the Cirrus EP93xx SPI controller in master @@ -314,6 +316,7 @@ config SPI_OMAP_UWIRE config SPI_OMAP24XX tristate "McSPI driver for OMAP" + depends on HAS_DMA depends on ARM || ARM64 || AVR32 || HEXAGON || MIPS || SUPERH depends on ARCH_OMAP2PLUS || COMPILE_TEST help @@ -500,7 +503,7 @@ config SPI_MXS config SPI_TEGRA114 tristate "NVIDIA Tegra114 SPI Controller" depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST - depends on RESET_CONTROLLER + depends on RESET_CONTROLLER && HAS_DMA help SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller is different than the older SoCs SPI controller and also register interface @@ -518,7 +521,7 @@ config SPI_TEGRA20_SFLASH config SPI_TEGRA20_SLINK tristate "Nvidia Tegra20/Tegra30 SLINK Controller" depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST - depends on RESET_CONTROLLER + depends on RESET_CONTROLLER && HAS_DMA help SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface. -- cgit v1.2.3 From fcf0af445bfdb617993af352ee442471aeca1073 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 29 Aug 2014 12:41:39 +0300 Subject: spi: dw-pci: move info message at the end of probe Let's print info message when controller is found and properly initialized. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-pci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index 3f3dc1226edf..0ac86a58dd27 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -40,9 +40,6 @@ static int spi_pci_probe(struct pci_dev *pdev, int pci_bar = 0; int ret; - dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n", - pdev->vendor, pdev->device); - ret = pcim_enable_device(pdev); if (ret) return ret; @@ -83,6 +80,9 @@ static int spi_pci_probe(struct pci_dev *pdev, /* PCI hook and SPI hook use the same drv data */ pci_set_drvdata(pdev, dwpci); + dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n", + pdev->vendor, pdev->device); + return 0; } -- cgit v1.2.3 From ceb86de9d6dae58b66ae10e7533ff2d3d8c7bbae Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 29 Aug 2014 12:41:40 +0300 Subject: spi: dw-pci: apply pci_bar and re-use pci_name Nevertheless pci_bar is 0 let's explicitly use it when map IO regions. While here, use pci_name instead of dev_name. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index 0ac86a58dd27..e203d8fc0ce6 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -55,7 +55,7 @@ static int spi_pci_probe(struct pci_dev *pdev, /* Get basic io resource and map it */ dws->paddr = pci_resource_start(pdev, pci_bar); - ret = pcim_iomap_regions(pdev, 1, dev_name(&pdev->dev)); + ret = pcim_iomap_regions(pdev, 1 << pci_bar, pci_name(pdev)); if (ret) return ret; -- cgit v1.2.3 From 35f2d4136477ce2cd684b03e7f1b802963750394 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 29 Aug 2014 12:41:41 +0300 Subject: spi: dw-pci: convert to use dev_pm_ops Convert system PM callbacks to use dev_pm_ops. In addition remove the PCI calls related to a power state since the bus code cares about this already. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-pci.c | 33 +++++++++++---------------------- 1 file changed, 11 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index e203d8fc0ce6..9e8d18cac03f 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -93,38 +93,26 @@ static void spi_pci_remove(struct pci_dev *pdev) dw_spi_remove_host(&dwpci->dws); } -#ifdef CONFIG_PM -static int spi_suspend(struct pci_dev *pdev, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int spi_suspend(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); - int ret; - ret = dw_spi_suspend_host(&dwpci->dws); - if (ret) - return ret; - pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return ret; + return dw_spi_suspend_host(&dwpci->dws); } -static int spi_resume(struct pci_dev *pdev) +static int spi_resume(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); - int ret; - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - ret = pci_enable_device(pdev); - if (ret) - return ret; return dw_spi_resume_host(&dwpci->dws); } -#else -#define spi_suspend NULL -#define spi_resume NULL #endif +static SIMPLE_DEV_PM_OPS(dw_spi_pm_ops, spi_suspend, spi_resume); + static const struct pci_device_id pci_ids[] = { /* Intel MID platform SPI controller 0 */ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) }, @@ -136,8 +124,9 @@ static struct pci_driver dw_spi_driver = { .id_table = pci_ids, .probe = spi_pci_probe, .remove = spi_pci_remove, - .suspend = spi_suspend, - .resume = spi_resume, + .driver = { + .pm = &dw_spi_pm_ops, + }, }; module_pci_driver(dw_spi_driver); -- cgit v1.2.3 From c95791b6a5c5f18addb41530d1c27c8f5d612d65 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 29 Aug 2014 12:41:42 +0300 Subject: spi: dw-pci: provide platform specific data via driver_data Instead of checking for device and vendor IDs inside probe function let's provide a helper function via driver_data. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-pci.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index 9e8d18cac03f..958bc4600877 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -32,11 +32,19 @@ struct dw_spi_pci { struct dw_spi dws; }; -static int spi_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) +struct spi_pci_desc { + int (*setup)(struct dw_spi *); +}; + +static struct spi_pci_desc spi_pci_mid_desc = { + .setup = dw_spi_mid_init, +}; + +static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct dw_spi_pci *dwpci; struct dw_spi *dws; + struct spi_pci_desc *desc = (struct spi_pci_desc *)ent->driver_data; int pci_bar = 0; int ret; @@ -64,11 +72,11 @@ static int spi_pci_probe(struct pci_dev *pdev, dws->irq = pdev->irq; /* - * Specific handling for Intel MID paltforms, like dma setup, + * Specific handling for paltforms, like dma setup, * clock rate, FIFO depth. */ - if (pdev->device == 0x0800) { - ret = dw_spi_mid_init(dws); + if (desc && desc->setup) { + ret = desc->setup(dws); if (ret) return ret; } @@ -115,7 +123,7 @@ static SIMPLE_DEV_PM_OPS(dw_spi_pm_ops, spi_suspend, spi_resume); static const struct pci_device_id pci_ids[] = { /* Intel MID platform SPI controller 0 */ - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) }, + { PCI_VDEVICE(INTEL, 0x0800), (kernel_ulong_t)&spi_pci_mid_desc}, {}, }; -- cgit v1.2.3 From 5dc23c442101d254246d88766c4423696b9aa9bd Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 29 Aug 2014 12:41:43 +0300 Subject: spi: dw-pci: remove FSF address and update copyright The FSF address is subject to change, thus remove it from the file. While here, update a copyright line. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-pci.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index 958bc4600877..c90a45009b9b 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -1,7 +1,7 @@ /* * PCI interface driver for DW SPI Core * - * Copyright (c) 2009, Intel Corporation. + * Copyright (c) 2009, 2014 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -11,10 +11,6 @@ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, - * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ #include -- cgit v1.2.3 From 175a3edcfdc4f25c53f265227c4e810ab2de80b5 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 2 Sep 2014 11:50:13 +0900 Subject: spi: ep93xx: Fix checkpatch issue Fix the following checkpatch warnings. WARNING: Missing a blank line after declarations Signed-off-by: Jingoo Han Acked-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/spi-ep93xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 2f675d32df0e..bf9728773247 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -266,6 +266,7 @@ static int ep93xx_spi_setup(struct spi_device *spi) if (chip->ops && chip->ops->setup) { int ret = chip->ops->setup(spi); + if (ret) { kfree(chip); return ret; -- cgit v1.2.3 From cdc67fa9415ff37d9970729c7a8d5c8911c1d204 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 2 Sep 2014 11:54:37 +0900 Subject: spi: xtensa-xtfpga: Fix checkpatch issue Fix the following checkpatch warnings. WARNING: Missing a blank line after declarations Signed-off-by: Jingoo Han Acked-by: Max Filippov Signed-off-by: Mark Brown --- drivers/spi/spi-xtensa-xtfpga.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c index 41e158187f9d..0dc5df5233a9 100644 --- a/drivers/spi/spi-xtensa-xtfpga.c +++ b/drivers/spi/spi-xtensa-xtfpga.c @@ -46,6 +46,7 @@ static inline unsigned int xtfpga_spi_read32(const struct xtfpga_spi *spi, static inline void xtfpga_spi_wait_busy(struct xtfpga_spi *xspi) { unsigned i; + for (i = 0; xtfpga_spi_read32(xspi, XTFPGA_SPI_BUSY) && i < BUSY_WAIT_US; ++i) udelay(1); -- cgit v1.2.3 From a7fa3219456bc044cc6b8654a5d8218a9df1c7bd Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 2 Sep 2014 11:50:48 +0900 Subject: spi: spi-mxs: Fix checkpatch issue Fix the following checkpatch warnings. WARNING: Missing a blank line after declarations WARNING: Prefer kcalloc over kzalloc with multiply Signed-off-by: Jingoo Han Acked-by: Marek Vasut Signed-off-by: Mark Brown --- drivers/spi/spi-mxs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index 2884f0c2f5f0..c3f8d3a22472 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -154,12 +154,14 @@ static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set) static void mxs_ssp_dma_irq_callback(void *param) { struct mxs_spi *spi = param; + complete(&spi->c); } static irqreturn_t mxs_ssp_irq_handler(int irq, void *dev_id) { struct mxs_ssp *ssp = dev_id; + dev_err(ssp->dev, "%s[%i] CTRL1=%08x STATUS=%08x\n", __func__, __LINE__, readl(ssp->base + HW_SSP_CTRL1(ssp)), @@ -189,7 +191,7 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, if (!len) return -EINVAL; - dma_xfer = kzalloc(sizeof(*dma_xfer) * sgs, GFP_KERNEL); + dma_xfer = kcalloc(sgs, sizeof(*dma_xfer), GFP_KERNEL); if (!dma_xfer) return -ENOMEM; -- cgit v1.2.3 From 859c3377ccc14c11a398c26af4fd3088d7578b2c Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 2 Sep 2014 11:48:00 +0900 Subject: spi: davinci: Fix checkpatch issue Fix the following checkpatch warnings. WARNING: Missing a blank line after declarations WARNING: quoted string split across lines Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-davinci.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 276a3884fb3c..514852cb7b3c 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -167,8 +167,10 @@ static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi) static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi) { u32 data = 0; + if (dspi->tx) { const u8 *tx = dspi->tx; + data = *tx++; dspi->tx = tx; } @@ -178,8 +180,10 @@ static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi) static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi) { u32 data = 0; + if (dspi->tx) { const u16 *tx = dspi->tx; + data = *tx++; dspi->tx = tx; } @@ -985,8 +989,8 @@ static int davinci_spi_probe(struct platform_device *pdev) goto free_clk; dev_info(&pdev->dev, "DMA: supported\n"); - dev_info(&pdev->dev, "DMA: RX channel: %pa, TX channel: %pa, " - "event queue: %d\n", &dma_rx_chan, &dma_tx_chan, + dev_info(&pdev->dev, "DMA: RX channel: %pa, TX channel: %pa, event queue: %d\n", + &dma_rx_chan, &dma_tx_chan, pdata->dma_event_q); } -- cgit v1.2.3 From fadcace703bbb985a996d01141499bd8d1f7d5bc Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 2 Sep 2014 11:49:24 +0900 Subject: spi: dw: Fix checkpatch issue Fix the following checkpatch warnings. WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required WARNING: min() should probably be min_t(u32, rx_left, dw_readw(dws, DW_SPI_RXFLR)) WARNING: else is not generally useful after a break or return WARNING: Missing a blank line after declarations WARNING: void function return statements are not generally useful Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-dw.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 29f33143b795..64bed88a53fb 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -135,8 +135,7 @@ static int mrst_spi_debugfs_init(struct dw_spi *dws) static void mrst_spi_debugfs_remove(struct dw_spi *dws) { - if (dws->debugfs) - debugfs_remove_recursive(dws->debugfs); + debugfs_remove_recursive(dws->debugfs); } #else @@ -177,7 +176,7 @@ static inline u32 rx_max(struct dw_spi *dws) { u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes; - return min(rx_left, (u32)dw_readw(dws, DW_SPI_RXFLR)); + return min_t(u32, rx_left, dw_readw(dws, DW_SPI_RXFLR)); } static void dw_writer(struct dw_spi *dws) @@ -228,8 +227,9 @@ static void *next_transfer(struct dw_spi *dws) struct spi_transfer, transfer_list); return RUNNING_STATE; - } else - return DONE_STATE; + } + + return DONE_STATE; } /* @@ -471,10 +471,12 @@ static void pump_transfers(unsigned long data) */ if (!dws->dma_mapped && !chip->poll_mode) { int templen = dws->len / dws->n_bytes; + txint_level = dws->fifo_len / 2; txint_level = (templen > txint_level) ? txint_level : templen; - imask |= SPI_INT_TXEI | SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI; + imask |= SPI_INT_TXEI | SPI_INT_TXOI | + SPI_INT_RXUI | SPI_INT_RXOI; dws->transfer_handler = interrupt_transfer; } @@ -515,7 +517,6 @@ static void pump_transfers(unsigned long data) early_exit: giveback(dws); - return; } static int dw_spi_transfer_one_message(struct spi_master *master, @@ -619,6 +620,7 @@ static void spi_hw_init(struct dw_spi *dws) */ if (!dws->fifo_len) { u32 fifo; + for (fifo = 2; fifo <= 257; fifo++) { dw_writew(dws, DW_SPI_TXFLTR, fifo); if (fifo != dw_readw(dws, DW_SPI_TXFLTR)) -- cgit v1.2.3 From b8434048dd19f1e87f0d53315b0507a6dc05668d Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 2 Sep 2014 11:51:39 +0900 Subject: spi: orion: Fix checkpatch issue Fix the following checkpatch warnings. WARNING: else is not generally useful after a break or return WARNING: Missing a blank line after declarations Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-orion.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index c4675fa8b645..345e7d61c399 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -179,8 +179,8 @@ static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi) for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) { if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG))) return 1; - else - udelay(1); + + udelay(1); } return -1; @@ -360,6 +360,7 @@ static int orion_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; if (pdev->dev.of_node) { u32 cell_index; + if (!of_property_read_u32(pdev->dev.of_node, "cell-index", &cell_index)) master->bus_num = cell_index; -- cgit v1.2.3 From c19c8e7581cf89fab669871646617aa919d37a03 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 2 Sep 2014 11:52:23 +0900 Subject: spi: tegra114: Fix checkpatch issue Fix the following checkpatch warnings. WARNING: Missing a blank line after declarations Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-tegra114.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index e4a85ada861d..795bcbc0131b 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -302,6 +302,7 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf( max_n_32bit = DIV_ROUND_UP(nbytes, 4); for (count = 0; count < max_n_32bit; count++) { u32 x = 0; + for (i = 0; (i < 4) && nbytes; i++, nbytes--) x |= (u32)(*tx_buf++) << (i * 8); tegra_spi_writel(tspi, x, SPI_TX_FIFO); @@ -312,6 +313,7 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf( nbytes = written_words * tspi->bytes_per_word; for (count = 0; count < max_n_32bit; count++) { u32 x = 0; + for (i = 0; nbytes && (i < tspi->bytes_per_word); i++, nbytes--) x |= (u32)(*tx_buf++) << (i * 8); @@ -338,6 +340,7 @@ static unsigned int tegra_spi_read_rx_fifo_to_client_rxbuf( len = tspi->curr_dma_words * tspi->bytes_per_word; for (count = 0; count < rx_full_count; count++) { u32 x = tegra_spi_readl(tspi, SPI_RX_FIFO); + for (i = 0; len && (i < 4); i++, len--) *rx_buf++ = (x >> i*8) & 0xFF; } @@ -345,8 +348,10 @@ static unsigned int tegra_spi_read_rx_fifo_to_client_rxbuf( read_words += tspi->curr_dma_words; } else { u32 rx_mask = ((u32)1 << t->bits_per_word) - 1; + for (count = 0; count < rx_full_count; count++) { u32 x = tegra_spi_readl(tspi, SPI_RX_FIFO) & rx_mask; + for (i = 0; (i < tspi->bytes_per_word); i++) *rx_buf++ = (x >> (i*8)) & 0xFF; } @@ -365,6 +370,7 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf( if (tspi->is_packed) { unsigned len = tspi->curr_dma_words * tspi->bytes_per_word; + memcpy(tspi->tx_dma_buf, t->tx_buf + tspi->cur_pos, len); } else { unsigned int i; @@ -374,6 +380,7 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf( for (count = 0; count < tspi->curr_dma_words; count++) { u32 x = 0; + for (i = 0; consume && (i < tspi->bytes_per_word); i++, consume--) x |= (u32)(*tx_buf++) << (i * 8); @@ -396,6 +403,7 @@ static void tegra_spi_copy_spi_rxbuf_to_client_rxbuf( if (tspi->is_packed) { unsigned len = tspi->curr_dma_words * tspi->bytes_per_word; + memcpy(t->rx_buf + tspi->cur_rx_pos, tspi->rx_dma_buf, len); } else { unsigned int i; @@ -405,6 +413,7 @@ static void tegra_spi_copy_spi_rxbuf_to_client_rxbuf( for (count = 0; count < tspi->curr_dma_words; count++) { u32 x = tspi->rx_dma_buf[count] & rx_mask; + for (i = 0; (i < tspi->bytes_per_word); i++) *rx_buf++ = (x >> (i*8)) & 0xFF; } -- cgit v1.2.3 From 327f5386d59db6bbef65f3cd731508934ba55ed4 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 2 Sep 2014 11:53:11 +0900 Subject: spi: tegra20-sflash: Fix checkpatch issue Fix the following checkpatch warnings. WARNING: macros should not use a trailing semicolon WARNING: Missing a blank line after declarations Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-tegra20-sflash.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c index 3548ce25c08f..cd66fe7b78a9 100644 --- a/drivers/spi/spi-tegra20-sflash.c +++ b/drivers/spi/spi-tegra20-sflash.c @@ -99,7 +99,7 @@ #define SPI_TX_TRIG_MASK (0x3 << 16) #define SPI_TX_TRIG_1W (0x0 << 16) #define SPI_TX_TRIG_4W (0x1 << 16) -#define SPI_DMA_BLK_COUNT(count) (((count) - 1) & 0xFFFF); +#define SPI_DMA_BLK_COUNT(count) (((count) - 1) & 0xFFFF) #define SPI_TX_FIFO 0x10 #define SPI_RX_FIFO 0x20 @@ -221,6 +221,7 @@ static int tegra_sflash_read_rx_fifo_to_client_rxbuf( while (!(status & SPI_RXF_EMPTY)) { int i; u32 x = tegra_sflash_readl(tsd, SPI_RX_FIFO); + for (i = 0; (i < tsd->bytes_per_word); i++) *rx_buf++ = (x >> (i*8)) & 0xFF; read_words++; -- cgit v1.2.3 From a2cea9831e7df2bd21ade3c02be4a94146e1645b Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 2 Sep 2014 11:53:54 +0900 Subject: spi: txx9: Fix checkpatch issue Fix the following checkpatch warnings. Missing a blank line after declarations. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-txx9.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c index 5f183baa91a9..2501a8373e89 100644 --- a/drivers/spi/spi-txx9.c +++ b/drivers/spi/spi-txx9.c @@ -97,6 +97,7 @@ static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c, int on, unsigned int cs_delay) { int val = (spi->mode & SPI_CS_HIGH) ? on : !on; + if (on) { /* deselect the chip with cs_change hint in last transfer */ if (c->last_chipselect >= 0) @@ -188,6 +189,7 @@ static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m) if (prev_speed_hz != speed_hz || prev_bits_per_word != bits_per_word) { int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1; + n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER); /* enter config mode */ txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, -- cgit v1.2.3 From 7850cdfc8028cc7d522c032f64c62c1c01e85875 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Tue, 2 Sep 2014 17:01:01 +0800 Subject: spi: sirf: correct spi gpio and hardware chipselect behaviour the old codes check the cs-gpios, if the gpio number is 0 like: <&gpio, 0, 0>, the driver will use the only hardware chipselect. this is wrong because of_spi_register_master() can read property cs-gpios from device node and set the spi master's cs number and gpio cs automatically based on whether the cs-gpios is valid. this patch fixes the beviour of CSR spi driver and move to a core level supported way. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 86 +++++++++++++++++++------------------------------- 1 file changed, 33 insertions(+), 53 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 95ac276eaafe..44ec3bbbf5a4 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -170,8 +170,7 @@ struct sirfsoc_spi { * command model */ bool tx_by_cmd; - - int chipselect[0]; + bool hw_cs; }; static void spi_sirfsoc_rx_word_u8(struct sirfsoc_spi *sspi) @@ -484,7 +483,7 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value) { struct sirfsoc_spi *sspi = spi_master_get_devdata(spi->master); - if (sspi->chipselect[spi->chip_select] == 0) { + if (sspi->hw_cs) { u32 regval = readl(sspi->base + SIRFSOC_SPI_CTRL); switch (value) { case BITBANG_CS_ACTIVE: @@ -502,14 +501,13 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value) } writel(regval, sspi->base + SIRFSOC_SPI_CTRL); } else { - int gpio = sspi->chipselect[spi->chip_select]; switch (value) { case BITBANG_CS_ACTIVE: - gpio_direction_output(gpio, + gpio_direction_output(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 1 : 0); break; case BITBANG_CS_INACTIVE: - gpio_direction_output(gpio, + gpio_direction_output(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); break; } @@ -603,8 +601,8 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) sspi->tx_by_cmd = false; } /* - * set spi controller in RISC chipselect mode, we are controlling CS by - * software BITBANG_CS_ACTIVE and BITBANG_CS_INACTIVE. + * it should never set to hardware cs mode because in hardware cs mode, + * cs signal can't controlled by driver. */ regval |= SIRFSOC_SPI_CS_IO_MODE; writel(regval, sspi->base + SIRFSOC_SPI_CTRL); @@ -627,9 +625,17 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) static int spi_sirfsoc_setup(struct spi_device *spi) { + struct sirfsoc_spi *sspi; + if (!spi->max_speed_hz) return -EINVAL; + sspi = spi_master_get_devdata(spi->master); + + if (spi->cs_gpio == -ENOENT) + sspi->hw_cs = true; + else + sspi->hw_cs = false; return spi_sirfsoc_setup_transfer(spi, NULL); } @@ -638,19 +644,10 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) struct sirfsoc_spi *sspi; struct spi_master *master; struct resource *mem_res; - int num_cs, cs_gpio, irq; - int i; - int ret; - - ret = of_property_read_u32(pdev->dev.of_node, - "sirf,spi-num-chipselects", &num_cs); - if (ret < 0) { - dev_err(&pdev->dev, "Unable to get chip select number\n"); - goto err_cs; - } + int irq; + int i, ret; - master = spi_alloc_master(&pdev->dev, - sizeof(*sspi) + sizeof(int) * num_cs); + master = spi_alloc_master(&pdev->dev, sizeof(*sspi)); if (!master) { dev_err(&pdev->dev, "Unable to allocate SPI master\n"); return -ENOMEM; @@ -658,32 +655,6 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, master); sspi = spi_master_get_devdata(master); - master->num_chipselect = num_cs; - - for (i = 0; i < master->num_chipselect; i++) { - cs_gpio = of_get_named_gpio(pdev->dev.of_node, "cs-gpios", i); - if (cs_gpio < 0) { - dev_err(&pdev->dev, "can't get cs gpio from DT\n"); - ret = -ENODEV; - goto free_master; - } - - sspi->chipselect[i] = cs_gpio; - if (cs_gpio == 0) - continue; /* use cs from spi controller */ - - ret = gpio_request(cs_gpio, DRIVER_NAME); - if (ret) { - while (i > 0) { - i--; - if (sspi->chipselect[i] > 0) - gpio_free(sspi->chipselect[i]); - } - dev_err(&pdev->dev, "fail to request cs gpios\n"); - goto free_master; - } - } - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); sspi->base = devm_ioremap_resource(&pdev->dev, mem_res); if (IS_ERR(sspi->base)) { @@ -753,7 +724,21 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) ret = spi_bitbang_start(&sspi->bitbang); if (ret) goto free_dummypage; - + for (i = 0; master->cs_gpios && i < master->num_chipselect; i++) { + if (master->cs_gpios[i] == -ENOENT) + continue; + if (!gpio_is_valid(master->cs_gpios[i])) { + dev_err(&pdev->dev, "no valid gpio\n"); + ret = -EINVAL; + goto free_dummypage; + } + ret = devm_gpio_request(&pdev->dev, + master->cs_gpios[i], DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, "failed to request gpio\n"); + goto free_dummypage; + } + } dev_info(&pdev->dev, "registerred, bus number = %d\n", master->bus_num); return 0; @@ -768,7 +753,7 @@ free_rx_dma: dma_release_channel(sspi->rx_chan); free_master: spi_master_put(master); -err_cs: + return ret; } @@ -776,16 +761,11 @@ static int spi_sirfsoc_remove(struct platform_device *pdev) { struct spi_master *master; struct sirfsoc_spi *sspi; - int i; master = platform_get_drvdata(pdev); sspi = spi_master_get_devdata(master); spi_bitbang_stop(&sspi->bitbang); - for (i = 0; i < master->num_chipselect; i++) { - if (sspi->chipselect[i] > 0) - gpio_free(sspi->chipselect[i]); - } kfree(sspi->dummypage); clk_disable_unprepare(sspi->clk); clk_put(sspi->clk); -- cgit v1.2.3 From 0021d97334d207169d2935489b8be11dc52c54a8 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Tue, 2 Sep 2014 17:01:04 +0800 Subject: spi: sirf: fix 'cmd_transfer' function typos unify 'cmd_transfer' like 'pio_transfer' and 'dma_transfer' as void function, and also change left_rx_word according to transfer result. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 44ec3bbbf5a4..d6308e6a9b47 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -303,7 +303,7 @@ static void spi_sirfsoc_dma_fini_callback(void *data) complete(dma_complete); } -static int spi_sirfsoc_cmd_transfer(struct spi_device *spi, +static void spi_sirfsoc_cmd_transfer(struct spi_device *spi, struct spi_transfer *t) { struct sirfsoc_spi *sspi; @@ -325,10 +325,9 @@ static int spi_sirfsoc_cmd_transfer(struct spi_device *spi, sspi->base + SIRFSOC_SPI_TX_RX_EN); if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) { dev_err(&spi->dev, "cmd transfer timeout\n"); - return 0; + return; } - - return t->len; + sspi->left_rx_word -= t->len; } static void spi_sirfsoc_dma_transfer(struct spi_device *spi, -- cgit v1.2.3 From 9593e61582248fe30b099d59d15edd5a30f87add Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Tue, 2 Sep 2014 17:02:36 +0800 Subject: spi: sirf: cleanup the indentation of marcos let "#define" statement keep same indentation. the old code layout is pretty ugly. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index d6308e6a9b47..adbabbdfc7f0 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -62,15 +62,15 @@ #define SIRFSOC_SPI_TRAN_DAT_FORMAT_12 (1 << 26) #define SIRFSOC_SPI_TRAN_DAT_FORMAT_16 (2 << 26) #define SIRFSOC_SPI_TRAN_DAT_FORMAT_32 (3 << 26) -#define SIRFSOC_SPI_CMD_BYTE_NUM(x) ((x & 3) << 28) -#define SIRFSOC_SPI_ENA_AUTO_CLR BIT(30) -#define SIRFSOC_SPI_MUL_DAT_MODE BIT(31) +#define SIRFSOC_SPI_CMD_BYTE_NUM(x) ((x & 3) << 28) +#define SIRFSOC_SPI_ENA_AUTO_CLR BIT(30) +#define SIRFSOC_SPI_MUL_DAT_MODE BIT(31) /* Interrupt Enable */ -#define SIRFSOC_SPI_RX_DONE_INT_EN BIT(0) -#define SIRFSOC_SPI_TX_DONE_INT_EN BIT(1) -#define SIRFSOC_SPI_RX_OFLOW_INT_EN BIT(2) -#define SIRFSOC_SPI_TX_UFLOW_INT_EN BIT(3) +#define SIRFSOC_SPI_RX_DONE_INT_EN BIT(0) +#define SIRFSOC_SPI_TX_DONE_INT_EN BIT(1) +#define SIRFSOC_SPI_RX_OFLOW_INT_EN BIT(2) +#define SIRFSOC_SPI_TX_UFLOW_INT_EN BIT(3) #define SIRFSOC_SPI_RX_IO_DMA_INT_EN BIT(4) #define SIRFSOC_SPI_TX_IO_DMA_INT_EN BIT(5) #define SIRFSOC_SPI_RXFIFO_FULL_INT_EN BIT(6) @@ -79,7 +79,7 @@ #define SIRFSOC_SPI_TXFIFO_THD_INT_EN BIT(9) #define SIRFSOC_SPI_FRM_END_INT_EN BIT(10) -#define SIRFSOC_SPI_INT_MASK_ALL 0x1FFF +#define SIRFSOC_SPI_INT_MASK_ALL 0x1FFF /* Interrupt status */ #define SIRFSOC_SPI_RX_DONE BIT(0) -- cgit v1.2.3 From 05ed2aee3e97c9cfb737388706b439264e27eb0c Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 12 Sep 2014 15:11:57 +0300 Subject: spi: dw: remove FSF address There is no need to keep FSF address in the head of the file. While here, fix few typos in the header. There is no functional change. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw.c | 4 ---- drivers/spi/spi-dw.h | 6 +++--- 2 files changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 29f33143b795..6e55334c239a 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -11,10 +11,6 @@ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ #include diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 6d2acad34f64..fcd12b6b4697 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -217,11 +217,11 @@ static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) * Each SPI slave device to work with dw_api controller should * has such a structure claiming its working mode (PIO/DMA etc), * which can be save in the "controller_data" member of the - * struct spi_device + * struct spi_device. */ struct dw_spi_chip { - u8 poll_mode; /* 0 for contoller polling mode */ - u8 type; /* SPI/SSP/Micrwire */ + u8 poll_mode; /* 1 for controller polling mode */ + u8 type; /* SPI/SSP/MicroWire */ u8 enable_dma; void (*cs_control)(u32 command); }; -- cgit v1.2.3 From fb57862ead652454ceeb659617404c5f13bc34b5 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 12 Sep 2014 15:11:58 +0300 Subject: spi: dw-mid: check that DMA was inited before exit If the driver was compiled with DMA support, but DMA channels weren't acquired by some reason, mid_spi_dma_exit() will crash the kernel. Fixes: 7063c0d942a1 (spi/dw_spi: add DMA support) Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-mid.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index 6d207afec8cb..0d88e4aab73e 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -89,6 +89,8 @@ err_exit: static void mid_spi_dma_exit(struct dw_spi *dws) { + if (!dws->dma_inited) + return; dma_release_channel(dws->txchan); dma_release_channel(dws->rxchan); } -- cgit v1.2.3 From ea092455d713d28c0b74a2ebe022524025d97491 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 12 Sep 2014 15:11:59 +0300 Subject: spi: dw-mid: remove Moorestown support The support of the Moorestown was removed [1] from kernel long time ago. This is just a follow up of that change. [1] http://www.spinics.net/lists/platform-driver-x86/msg02948.html Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 2 +- drivers/spi/spi-dw-mid.c | 8 +++----- 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 62e2242ad7e0..6343df87afb3 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -591,7 +591,7 @@ config SPI_DW_PCI depends on SPI_DESIGNWARE && PCI config SPI_DW_MID_DMA - bool "DMA support for DW SPI controller on Intel Moorestown platform" + bool "DMA support for DW SPI controller on Intel MID platform" depends on SPI_DW_PCI && INTEL_MID_DMAC config SPI_DW_MMIO diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index 0d88e4aab73e..deba3c459d68 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -50,11 +50,9 @@ static int mid_spi_dma_init(struct dw_spi *dws) /* * Get pci device for DMA controller, currently it could only - * be the DMA controller of either Moorestown or Medfield + * be the DMA controller of Medfield */ - dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0813, NULL); - if (!dws->dmac) - dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL); + dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL); dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); @@ -192,7 +190,7 @@ static struct dw_spi_dma_ops mid_dma_ops = { }; #endif -/* Some specific info for SPI0 controller on Moorestown */ +/* Some specific info for SPI0 controller on Intel MID */ /* HW info for MRST CLk Control Unit, one 32b reg */ #define MRST_SPI_CLK_BASE 100000000 /* 100m */ -- cgit v1.2.3 From b89e9c87dd3b118f0b953d349e5bede1505e3bc5 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 12 Sep 2014 15:12:00 +0300 Subject: spi: dw-mid: remove redundant dmac member Instead of using that member we prefer to use dma_dev which represents actual struct device of the DMA device. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-mid.c | 12 ++++++++---- drivers/spi/spi-dw.h | 1 - 2 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index deba3c459d68..9ae2eaa228fd 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -39,12 +39,13 @@ static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param) { struct dw_spi *dws = param; - return dws->dmac && (&dws->dmac->dev == chan->device->dev); + return dws->dma_dev == chan->device->dev; } static int mid_spi_dma_init(struct dw_spi *dws) { struct mid_dma *dw_dma = dws->dma_priv; + struct pci_dev *dma_dev; struct intel_mid_dma_slave *rxs, *txs; dma_cap_mask_t mask; @@ -52,7 +53,11 @@ static int mid_spi_dma_init(struct dw_spi *dws) * Get pci device for DMA controller, currently it could only * be the DMA controller of Medfield */ - dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL); + dma_dev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL); + if (!dma_dev) + return -ENODEV; + + dws->dma_dev = &dma_dev->dev; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); @@ -81,8 +86,7 @@ static int mid_spi_dma_init(struct dw_spi *dws) free_rxchan: dma_release_channel(dws->rxchan); err_exit: - return -1; - + return -EBUSY; } static void mid_spi_dma_exit(struct dw_spi *dws) diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index fcd12b6b4697..089fc4ba3ace 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -140,7 +140,6 @@ struct dw_spi { dma_addr_t dma_addr; /* phy address of the Data register */ struct dw_spi_dma_ops *dma_ops; void *dma_priv; /* platform relate info */ - struct pci_dev *dmac; /* Bus interface info */ void *priv; -- cgit v1.2.3 From 197e96b4d80554a66aff34df5406b4c2d26f0111 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 12 Sep 2014 15:12:01 +0300 Subject: spi: dw-mid: remove FSF address and update copyright The FSF address is subject to change, thus remove it from the file. While here, update a copyright line. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-mid.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index 9ae2eaa228fd..c4b9f6497d5b 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -1,7 +1,7 @@ /* * Special handling for DW core on Intel MID platform * - * Copyright (c) 2009, Intel Corporation. + * Copyright (c) 2009, 2014 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -11,10 +11,6 @@ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, - * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ #include -- cgit v1.2.3 From 53288fe9bdc7e8a0265bbe9074f71f1a6c478008 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 12 Sep 2014 15:11:56 +0300 Subject: spi: dw: don't use mrst prefix anymore Since driver is used on other platforms and debugfs stuff would be useful there as well let's substitute mrst_ by dw_ where it suits. Additionally let's use SPI master device name when print registers dump. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index fdb5a6d1c8c6..e2f7c5c0f4ba 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -55,22 +55,20 @@ struct chip_data { #ifdef CONFIG_DEBUG_FS #define SPI_REGS_BUFSIZE 1024 -static ssize_t spi_show_regs(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) +static ssize_t dw_spi_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) { - struct dw_spi *dws; + struct dw_spi *dws = file->private_data; char *buf; u32 len = 0; ssize_t ret; - dws = file->private_data; - buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL); if (!buf) return 0; len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, - "MRST SPI0 registers:\n"); + "%s registers:\n", dev_name(&dws->master->dev)); len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, "=================================\n"); len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, @@ -106,41 +104,41 @@ static ssize_t spi_show_regs(struct file *file, char __user *user_buf, len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, "=================================\n"); - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); kfree(buf); return ret; } -static const struct file_operations mrst_spi_regs_ops = { +static const struct file_operations dw_spi_regs_ops = { .owner = THIS_MODULE, .open = simple_open, - .read = spi_show_regs, + .read = dw_spi_show_regs, .llseek = default_llseek, }; -static int mrst_spi_debugfs_init(struct dw_spi *dws) +static int dw_spi_debugfs_init(struct dw_spi *dws) { - dws->debugfs = debugfs_create_dir("mrst_spi", NULL); + dws->debugfs = debugfs_create_dir("dw_spi", NULL); if (!dws->debugfs) return -ENOMEM; debugfs_create_file("registers", S_IFREG | S_IRUGO, - dws->debugfs, (void *)dws, &mrst_spi_regs_ops); + dws->debugfs, (void *)dws, &dw_spi_regs_ops); return 0; } -static void mrst_spi_debugfs_remove(struct dw_spi *dws) +static void dw_spi_debugfs_remove(struct dw_spi *dws) { debugfs_remove_recursive(dws->debugfs); } #else -static inline int mrst_spi_debugfs_init(struct dw_spi *dws) +static inline int dw_spi_debugfs_init(struct dw_spi *dws) { return 0; } -static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) +static inline void dw_spi_debugfs_remove(struct dw_spi *dws) { } #endif /* CONFIG_DEBUG_FS */ @@ -682,7 +680,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) goto err_dma_exit; } - mrst_spi_debugfs_init(dws); + dw_spi_debugfs_init(dws); return 0; err_dma_exit: @@ -699,7 +697,7 @@ void dw_spi_remove_host(struct dw_spi *dws) { if (!dws) return; - mrst_spi_debugfs_remove(dws); + dw_spi_debugfs_remove(dws); if (dws->dma_ops && dws->dma_ops->dma_exit) dws->dma_ops->dma_exit(dws); -- cgit v1.2.3 From 365a7bb32e097a8501a6a70b9225abcb09924f8c Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 16 Sep 2014 14:25:05 +0300 Subject: spi: davinci: add support for adding delay between word's transmissions This patch adds ability to configure delay between transmission of words over SPI bus if it's required by SPI slave devices. New optional SPI slave property: - ti,spi-word-delay : delay between transmission of words (SPIFMTn.WDELAY, SPIDAT1.WDEL) Signed-off-by: Murali Karicheri Signed-off-by: Grygorii Strashko Signed-off-by: Mark Brown --- drivers/spi/spi-davinci.c | 55 +++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 48 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 84a9fb1ab984..25886d8a84ba 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -65,6 +65,7 @@ /* SPIDAT1 (upper 16 bit defines) */ #define SPIDAT1_CSHOLD_MASK BIT(12) +#define SPIDAT1_WDEL BIT(10) /* SPIGCR1 */ #define SPIGCR1_CLKMOD_MASK BIT(1) @@ -209,6 +210,7 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value) { struct davinci_spi *dspi; struct davinci_spi_platform_data *pdata; + struct davinci_spi_config *spicfg = spi->controller_data; u8 chip_sel = spi->chip_select; u16 spidat1 = CS_DEFAULT; bool gpio_chipsel = false; @@ -223,6 +225,10 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value) gpio = spi->cs_gpio; } + /* program delay transfers if tx_delay is non zero */ + if (spicfg->wdelay) + spidat1 |= SPIDAT1_WDEL; + /* * Board specific chip select logic decides the polarity and cs * line for the controller @@ -237,9 +243,9 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value) spidat1 |= SPIDAT1_CSHOLD_MASK; spidat1 &= ~(0x1 << chip_sel); } - - iowrite16(spidat1, dspi->base + SPIDAT1 + 2); } + + iowrite16(spidat1, dspi->base + SPIDAT1 + 2); } /** @@ -285,7 +291,7 @@ static int davinci_spi_setup_transfer(struct spi_device *spi, int prescale; dspi = spi_master_get_devdata(spi->master); - spicfg = (struct davinci_spi_config *)spi->controller_data; + spicfg = spi->controller_data; if (!spicfg) spicfg = &davinci_spi_default_cfg; @@ -332,6 +338,14 @@ static int davinci_spi_setup_transfer(struct spi_device *spi, if (!(spi->mode & SPI_CPHA)) spifmt |= SPIFMT_PHASE_MASK; + /* + * Assume wdelay is used only on SPI peripherals that has this field + * in SPIFMTn register and when it's configured from board file or DT. + */ + if (spicfg->wdelay) + spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT) + & SPIFMT_WDELAY_MASK); + /* * Version 1 hardware supports two basic SPI modes: * - Standard SPI mode uses 4 pins, with chipselect @@ -349,9 +363,6 @@ static int davinci_spi_setup_transfer(struct spi_device *spi, u32 delay = 0; - spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT) - & SPIFMT_WDELAY_MASK); - if (spicfg->odd_parity) spifmt |= SPIFMT_ODD_PARITY_MASK; @@ -383,6 +394,26 @@ static int davinci_spi_setup_transfer(struct spi_device *spi, return 0; } +static int davinci_spi_of_setup(struct spi_device *spi) +{ + struct davinci_spi_config *spicfg = spi->controller_data; + struct device_node *np = spi->dev.of_node; + u32 prop; + + if (spicfg == NULL && np) { + spicfg = kzalloc(sizeof(*spicfg), GFP_KERNEL); + if (!spicfg) + return -ENOMEM; + *spicfg = davinci_spi_default_cfg; + /* override with dt configured values */ + if (!of_property_read_u32(np, "ti,spi-wdelay", &prop)) + spicfg->wdelay = (u8)prop; + spi->controller_data = spicfg; + } + + return 0; +} + /** * davinci_spi_setup - This functions will set default transfer method * @spi: spi device on which data transfer to be done @@ -433,7 +464,16 @@ static int davinci_spi_setup(struct spi_device *spi) else clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); - return retval; + return davinci_spi_of_setup(spi); +} + +static void davinci_spi_cleanup(struct spi_device *spi) +{ + struct davinci_spi_config *spicfg = spi->controller_data; + + spi->controller_data = NULL; + if (spi->dev.of_node) + kfree(spicfg); } static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) @@ -947,6 +987,7 @@ static int davinci_spi_probe(struct platform_device *pdev) master->num_chipselect = pdata->num_chipselect; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16); master->setup = davinci_spi_setup; + master->cleanup = davinci_spi_cleanup; dspi->bitbang.chipselect = davinci_spi_chipselect; dspi->bitbang.setup_transfer = davinci_spi_setup_transfer; -- cgit v1.2.3 From f62caccd12c17e4cb516d43a6e4dd8a3abc1f7e0 Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Thu, 11 Sep 2014 09:18:44 +0800 Subject: spi: spi-imx: add DMA support Enable DMA support on i.mx6. The read speed can increase from 600KB/s to 1.2MB/s on i.mx6q. You can disable or enable dma function in dts. If not set "dma-names" in dts, spi will use PIO mode. This patch only validate on i.mx6, not i.mx5, but encourage ones to apply this patch on i.mx5 since they share the same IP. Note: Sometime, there is a weid data in rxfifo after one full tx/rx transfer finish by DMA on i.mx6dl, so we disable dma functhion on i.mx6dl. Signed-off-by: Frank Li Signed-off-by: Robin Gong Acked-by: Marek Vasut Signed-off-by: Mark Brown --- drivers/spi/spi-imx.c | 286 ++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 280 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 5daff2054ae4..3637847b5370 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #include #include #include @@ -37,6 +39,7 @@ #include #include +#include #include #define DRIVER_NAME "spi_imx" @@ -51,6 +54,9 @@ #define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */ #define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */ +/* The maximum bytes that a sdma BD can transfer.*/ +#define MAX_SDMA_BD_BYTES (1 << 15) +#define IMX_DMA_TIMEOUT (msecs_to_jiffies(3000)) struct spi_imx_config { unsigned int speed_hz; unsigned int bpw; @@ -95,6 +101,16 @@ struct spi_imx_data { const void *tx_buf; unsigned int txfifo; /* number of words pushed in tx FIFO */ + /* DMA */ + unsigned int dma_is_inited; + unsigned int dma_finished; + bool usedma; + u32 rx_wml; + u32 tx_wml; + u32 rxt_wml; + struct completion dma_rx_completion; + struct completion dma_tx_completion; + const struct spi_imx_devtype_data *devtype_data; int chipselect[0]; }; @@ -181,9 +197,21 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, return 7; } +static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct spi_imx_data *spi_imx = spi_master_get_devdata(master); + + if (spi_imx->dma_is_inited && (transfer->len > spi_imx->rx_wml) + && (transfer->len > spi_imx->tx_wml)) + return true; + return false; +} + #define MX51_ECSPI_CTRL 0x08 #define MX51_ECSPI_CTRL_ENABLE (1 << 0) #define MX51_ECSPI_CTRL_XCH (1 << 2) +#define MX51_ECSPI_CTRL_SMC (1 << 3) #define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4) #define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8 #define MX51_ECSPI_CTRL_PREDIV_OFFSET 12 @@ -201,6 +229,18 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, #define MX51_ECSPI_INT_TEEN (1 << 0) #define MX51_ECSPI_INT_RREN (1 << 3) +#define MX51_ECSPI_DMA 0x14 +#define MX51_ECSPI_DMA_TX_WML_OFFSET 0 +#define MX51_ECSPI_DMA_TX_WML_MASK 0x3F +#define MX51_ECSPI_DMA_RX_WML_OFFSET 16 +#define MX51_ECSPI_DMA_RX_WML_MASK (0x3F << 16) +#define MX51_ECSPI_DMA_RXT_WML_OFFSET 24 +#define MX51_ECSPI_DMA_RXT_WML_MASK (0x3F << 24) + +#define MX51_ECSPI_DMA_TEDEN_OFFSET 7 +#define MX51_ECSPI_DMA_RXDEN_OFFSET 23 +#define MX51_ECSPI_DMA_RXTDEN_OFFSET 31 + #define MX51_ECSPI_STAT 0x18 #define MX51_ECSPI_STAT_RR (1 << 3) @@ -257,17 +297,22 @@ static void __maybe_unused mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx) { - u32 reg; - - reg = readl(spi_imx->base + MX51_ECSPI_CTRL); - reg |= MX51_ECSPI_CTRL_XCH; + u32 reg = readl(spi_imx->base + MX51_ECSPI_CTRL); + + if (!spi_imx->usedma) + reg |= MX51_ECSPI_CTRL_XCH; + else if (!spi_imx->dma_finished) + reg |= MX51_ECSPI_CTRL_SMC; + else + reg &= ~MX51_ECSPI_CTRL_SMC; writel(reg, spi_imx->base + MX51_ECSPI_CTRL); } static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { - u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0; + u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0, dma = 0; + u32 tx_wml_cfg, rx_wml_cfg, rxt_wml_cfg; u32 clk = config->speed_hz, delay; /* @@ -319,6 +364,30 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, else /* SCLK is _very_ slow */ usleep_range(delay, delay + 10); + /* + * Configure the DMA register: setup the watermark + * and enable DMA request. + */ + if (spi_imx->dma_is_inited) { + dma = readl(spi_imx->base + MX51_ECSPI_DMA); + + spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2; + spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2; + spi_imx->rxt_wml = spi_imx_get_fifosize(spi_imx) / 2; + rx_wml_cfg = spi_imx->rx_wml << MX51_ECSPI_DMA_RX_WML_OFFSET; + tx_wml_cfg = spi_imx->tx_wml << MX51_ECSPI_DMA_TX_WML_OFFSET; + rxt_wml_cfg = spi_imx->rxt_wml << MX51_ECSPI_DMA_RXT_WML_OFFSET; + dma = (dma & ~MX51_ECSPI_DMA_TX_WML_MASK + & ~MX51_ECSPI_DMA_RX_WML_MASK + & ~MX51_ECSPI_DMA_RXT_WML_MASK) + | rx_wml_cfg | tx_wml_cfg | rxt_wml_cfg + |(1 << MX51_ECSPI_DMA_TEDEN_OFFSET) + |(1 << MX51_ECSPI_DMA_RXDEN_OFFSET) + |(1 << MX51_ECSPI_DMA_RXTDEN_OFFSET); + + writel(dma, spi_imx->base + MX51_ECSPI_DMA); + } + return 0; } @@ -730,7 +799,186 @@ static int spi_imx_setupxfer(struct spi_device *spi, return 0; } -static int spi_imx_transfer(struct spi_device *spi, +static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx) +{ + struct spi_master *master = spi_imx->bitbang.master; + + if (master->dma_rx) { + dma_release_channel(master->dma_rx); + master->dma_rx = NULL; + } + + if (master->dma_tx) { + dma_release_channel(master->dma_tx); + master->dma_tx = NULL; + } + + spi_imx->dma_is_inited = 0; +} + +static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, + struct spi_master *master, + const struct resource *res) +{ + struct dma_slave_config slave_config = {}; + int ret; + + /* Prepare for TX DMA: */ + master->dma_tx = dma_request_slave_channel(dev, "tx"); + if (!master->dma_tx) { + dev_err(dev, "cannot get the TX DMA channel!\n"); + ret = -EINVAL; + goto err; + } + + slave_config.direction = DMA_MEM_TO_DEV; + slave_config.dst_addr = res->start + MXC_CSPITXDATA; + slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + slave_config.dst_maxburst = spi_imx_get_fifosize(spi_imx) / 2; + ret = dmaengine_slave_config(master->dma_tx, &slave_config); + if (ret) { + dev_err(dev, "error in TX dma configuration.\n"); + goto err; + } + + /* Prepare for RX : */ + master->dma_rx = dma_request_slave_channel(dev, "rx"); + if (!master->dma_rx) { + dev_dbg(dev, "cannot get the DMA channel.\n"); + ret = -EINVAL; + goto err; + } + + slave_config.direction = DMA_DEV_TO_MEM; + slave_config.src_addr = res->start + MXC_CSPIRXDATA; + slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + slave_config.src_maxburst = spi_imx_get_fifosize(spi_imx) / 2; + ret = dmaengine_slave_config(master->dma_rx, &slave_config); + if (ret) { + dev_err(dev, "error in RX dma configuration.\n"); + goto err; + } + + init_completion(&spi_imx->dma_rx_completion); + init_completion(&spi_imx->dma_tx_completion); + master->can_dma = spi_imx_can_dma; + master->max_dma_len = MAX_SDMA_BD_BYTES; + spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX | + SPI_MASTER_MUST_TX; + spi_imx->dma_is_inited = 1; + + return 0; +err: + spi_imx_sdma_exit(spi_imx); + return ret; +} + +static void spi_imx_dma_rx_callback(void *cookie) +{ + struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie; + + complete(&spi_imx->dma_rx_completion); +} + +static void spi_imx_dma_tx_callback(void *cookie) +{ + struct spi_imx_data *spi_imx = (struct spi_imx_data *)cookie; + + complete(&spi_imx->dma_tx_completion); +} + +static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, + struct spi_transfer *transfer) +{ + struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL; + int ret; + u32 dma; + int left; + struct spi_master *master = spi_imx->bitbang.master; + struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg; + + if (tx) { + desc_tx = dmaengine_prep_slave_sg(master->dma_tx, + tx->sgl, tx->nents, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_tx) + goto no_dma; + + desc_tx->callback = spi_imx_dma_tx_callback; + desc_tx->callback_param = (void *)spi_imx; + dmaengine_submit(desc_tx); + } + + if (rx) { + desc_rx = dmaengine_prep_slave_sg(master->dma_rx, + rx->sgl, rx->nents, DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_rx) + goto no_dma; + + desc_rx->callback = spi_imx_dma_rx_callback; + desc_rx->callback_param = (void *)spi_imx; + dmaengine_submit(desc_rx); + } + + reinit_completion(&spi_imx->dma_rx_completion); + reinit_completion(&spi_imx->dma_tx_completion); + + /* Trigger the cspi module. */ + spi_imx->dma_finished = 0; + + dma = readl(spi_imx->base + MX51_ECSPI_DMA); + dma = dma & (~MX51_ECSPI_DMA_RXT_WML_MASK); + /* Change RX_DMA_LENGTH trigger dma fetch tail data */ + left = transfer->len % spi_imx->rxt_wml; + if (left) + writel(dma | (left << MX51_ECSPI_DMA_RXT_WML_OFFSET), + spi_imx->base + MX51_ECSPI_DMA); + spi_imx->devtype_data->trigger(spi_imx); + + dma_async_issue_pending(master->dma_tx); + dma_async_issue_pending(master->dma_rx); + /* Wait SDMA to finish the data transfer.*/ + ret = wait_for_completion_timeout(&spi_imx->dma_tx_completion, + IMX_DMA_TIMEOUT); + if (!ret) { + pr_warn("%s %s: I/O Error in DMA TX\n", + dev_driver_string(&master->dev), + dev_name(&master->dev)); + dmaengine_terminate_all(master->dma_tx); + } else { + ret = wait_for_completion_timeout(&spi_imx->dma_rx_completion, + IMX_DMA_TIMEOUT); + if (!ret) { + pr_warn("%s %s: I/O Error in DMA RX\n", + dev_driver_string(&master->dev), + dev_name(&master->dev)); + spi_imx->devtype_data->reset(spi_imx); + dmaengine_terminate_all(master->dma_rx); + } + writel(dma | + spi_imx->rxt_wml << MX51_ECSPI_DMA_RXT_WML_OFFSET, + spi_imx->base + MX51_ECSPI_DMA); + } + + spi_imx->dma_finished = 1; + spi_imx->devtype_data->trigger(spi_imx); + + if (!ret) + ret = -ETIMEDOUT; + else if (ret > 0) + ret = transfer->len; + + return ret; + +no_dma: + pr_warn_once("%s %s: DMA not available, falling back to PIO\n", + dev_driver_string(&master->dev), + dev_name(&master->dev)); + return -EAGAIN; +} + +static int spi_imx_pio_transfer(struct spi_device *spi, struct spi_transfer *transfer) { struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); @@ -751,6 +999,24 @@ static int spi_imx_transfer(struct spi_device *spi, return transfer->len; } +static int spi_imx_transfer(struct spi_device *spi, + struct spi_transfer *transfer) +{ + int ret; + struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + + if (spi_imx->bitbang.master->can_dma && + spi_imx_can_dma(spi_imx->bitbang.master, spi, transfer)) { + spi_imx->usedma = true; + ret = spi_imx_dma_transfer(spi_imx, transfer); + if (ret != -EAGAIN) + return ret; + } + spi_imx->usedma = false; + + return spi_imx_pio_transfer(spi, transfer); +} + static int spi_imx_setup(struct spi_device *spi) { struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); @@ -911,6 +1177,13 @@ static int spi_imx_probe(struct platform_device *pdev) goto out_put_per; spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per); + /* + * Only validated on i.mx6 now, can remove the constrain if validated on + * other chips. + */ + if (spi_imx->devtype_data == &imx51_ecspi_devtype_data + && spi_imx_sdma_init(&pdev->dev, spi_imx, master, res)) + dev_err(&pdev->dev, "dma setup error,use pio instead\n"); spi_imx->devtype_data->reset(spi_imx); @@ -949,6 +1222,7 @@ static int spi_imx_remove(struct platform_device *pdev) writel(0, spi_imx->base + MXC_CSPICTRL); clk_unprepare(spi_imx->clk_ipg); clk_unprepare(spi_imx->clk_per); + spi_imx_sdma_exit(spi_imx); spi_master_put(master); return 0; -- cgit v1.2.3 From 73e3f1eb51888303389f2dc2219c97ce34ca6db0 Mon Sep 17 00:00:00 2001 From: Kiran Padwal Date: Thu, 18 Sep 2014 12:57:47 +0530 Subject: spi: pl022: Add missing error check for devm_kzalloc Currently this driver is missing a check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. This patch adds a missing check. Signed-off-by: Kiran Padwal Signed-off-by: Mark Brown --- drivers/spi/spi-pl022.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 1189cfd96477..7f13f3f7198b 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2100,6 +2100,10 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) pl022->vendor = id->data; pl022->chipselects = devm_kzalloc(dev, num_cs * sizeof(int), GFP_KERNEL); + if (!pl022->chipselects) { + status = -ENOMEM; + goto err_no_mem; + } /* * Bus Number Which has been Assigned to this SSP controller @@ -2241,6 +2245,7 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) amba_release_regions(adev); err_no_ioregion: err_no_gpio: + err_no_mem: spi_master_put(master); return status; } -- cgit v1.2.3 From a5b4b234e15b68539dd4677bb8b0aeeef100fbba Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 20 Sep 2014 11:05:09 +0400 Subject: spi: clps711x: Migrate to the new clk subsystem Currently clps711x arch have a fully functional CLK driver. This patch migrates clps711x-spi driver to use the new CLK subsystem. Signed-off-by: Alexander Shiyan Signed-off-by: Mark Brown --- drivers/spi/spi-clps711x.c | 34 ++-------------------------------- 1 file changed, 2 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index ce538dad526b..181cf2262006 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -30,7 +30,6 @@ struct spi_clps711x_data { void __iomem *syncio; struct regmap *syscon; - struct regmap *syscon1; struct clk *spi_clk; u8 *tx_buf; @@ -47,27 +46,6 @@ static int spi_clps711x_setup(struct spi_device *spi) return 0; } -static void spi_clps711x_setup_xfer(struct spi_device *spi, - struct spi_transfer *xfer) -{ - struct spi_master *master = spi->master; - struct spi_clps711x_data *hw = spi_master_get_devdata(master); - - /* Setup SPI frequency divider */ - if (xfer->speed_hz >= master->max_speed_hz) - regmap_update_bits(hw->syscon1, SYSCON_OFFSET, - SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(3)); - else if (xfer->speed_hz >= (master->max_speed_hz / 2)) - regmap_update_bits(hw->syscon1, SYSCON_OFFSET, - SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(2)); - else if (xfer->speed_hz >= (master->max_speed_hz / 8)) - regmap_update_bits(hw->syscon1, SYSCON_OFFSET, - SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(1)); - else - regmap_update_bits(hw->syscon1, SYSCON_OFFSET, - SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(0)); -} - static int spi_clps711x_prepare_message(struct spi_master *master, struct spi_message *msg) { @@ -87,7 +65,7 @@ static int spi_clps711x_transfer_one(struct spi_master *master, struct spi_clps711x_data *hw = spi_master_get_devdata(master); u8 data; - spi_clps711x_setup_xfer(spi, xfer); + clk_set_rate(hw->spi_clk, xfer->speed_hz ? : spi->max_speed_hz); hw->len = xfer->len; hw->bpw = xfer->bits_per_word; @@ -176,13 +154,11 @@ static int spi_clps711x_probe(struct platform_device *pdev) } } - hw->spi_clk = devm_clk_get(&pdev->dev, "spi"); + hw->spi_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(hw->spi_clk)) { - dev_err(&pdev->dev, "Can't get clocks\n"); ret = PTR_ERR(hw->spi_clk); goto err_out; } - master->max_speed_hz = clk_get_rate(hw->spi_clk); hw->syscon = syscon_regmap_lookup_by_pdevname("syscon.3"); if (IS_ERR(hw->syscon)) { @@ -190,12 +166,6 @@ static int spi_clps711x_probe(struct platform_device *pdev) goto err_out; } - hw->syscon1 = syscon_regmap_lookup_by_pdevname("syscon.1"); - if (IS_ERR(hw->syscon1)) { - ret = PTR_ERR(hw->syscon1); - goto err_out; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hw->syncio = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hw->syncio)) { -- cgit v1.2.3 From b41583e7299046abdc578c33f25ed83ee95b9b31 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 18 Sep 2014 20:08:51 +0300 Subject: spi: dw-mid: respect 8 bit mode In case of 8 bit mode and DMA usage we end up with every second byte written as 0. We have to respect bits_per_word settings what this patch actually does. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-dw-mid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index c4b9f6497d5b..f7f0ad285ae6 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -136,7 +136,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) txconf.dst_addr = dws->dma_addr; txconf.dst_maxburst = LNW_DMA_MSIZE_16; txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + txconf.dst_addr_width = dws->dma_width; txconf.device_fc = false; txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, @@ -159,7 +159,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) rxconf.src_addr = dws->dma_addr; rxconf.src_maxburst = LNW_DMA_MSIZE_16; rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + rxconf.src_addr_width = dws->dma_width; rxconf.device_fc = false; rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, -- cgit v1.2.3 From 8e45ef682cb31fda62ed4eeede5d9745a0a1b1e2 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 18 Sep 2014 20:08:53 +0300 Subject: spi: dw-mid: terminate ongoing transfers at exit Do full clean up at exit, means terminate all ongoing DMA transfers. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-dw-mid.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index f7f0ad285ae6..ecae30fe28af 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -89,7 +89,11 @@ static void mid_spi_dma_exit(struct dw_spi *dws) { if (!dws->dma_inited) return; + + dmaengine_terminate_all(dws->txchan); dma_release_channel(dws->txchan); + + dmaengine_terminate_all(dws->rxchan); dma_release_channel(dws->rxchan); } -- cgit v1.2.3 From c3ce15bf2ae5cde3392944ad043b80f123510cde Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 18 Sep 2014 20:08:56 +0300 Subject: spi: dw: introduce support of loopback mode For testing purposes it's good to have a loopback mode enabled. The patch adds necessary bits for that. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index e2f7c5c0f4ba..7064cd008539 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -591,6 +591,9 @@ static int dw_spi_setup(struct spi_device *spi) | (spi->mode << SPI_MODE_OFFSET) | (chip->tmode << SPI_TMOD_OFFSET); + if (spi->mode & SPI_LOOP) + chip->cr0 |= 1 << SPI_SRL_OFFSET; + if (gpio_is_valid(spi->cs_gpio)) { ret = gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); @@ -652,7 +655,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) goto err_free_master; } - master->mode_bits = SPI_CPOL | SPI_CPHA; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP; master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); master->bus_num = dws->bus_num; master->num_chipselect = dws->num_cs; -- cgit v1.2.3 From c3c6e231d860774037e7001ff3d536e5644fe2da Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 18 Sep 2014 20:08:57 +0300 Subject: spi: dw: fix style of code in few places Make comments be surrounded by spaces and move part of code to one line where it suits 80 characters. There is no functional changes. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 7064cd008539..6bb484919e58 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -390,7 +390,7 @@ static void pump_transfers(unsigned long data) goto early_exit; } - /* Delay if requested at end of transfer*/ + /* Delay if requested at end of transfer */ if (message->state == RUNNING_STATE) { previous = list_entry(transfer->transfer_list.prev, struct spi_transfer, @@ -519,7 +519,7 @@ static int dw_spi_transfer_one_message(struct spi_master *master, struct dw_spi *dws = spi_master_get_devdata(master); dws->cur_msg = msg; - /* Initial message state*/ + /* Initial message state */ dws->cur_msg->state = START_STATE; dws->cur_transfer = list_entry(dws->cur_msg->transfers.next, struct spi_transfer, @@ -645,8 +645,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) dws->prev_chip = NULL; dws->dma_inited = 0; dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60); - snprintf(dws->name, sizeof(dws->name), "dw_spi%d", - dws->bus_num); + snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num); ret = devm_request_irq(dev, dws->irq, dw_spi_irq, IRQF_SHARED, dws->name, dws); -- cgit v1.2.3 From c7908a37aeee2a038d7b1492eae29750d8738d2e Mon Sep 17 00:00:00 2001 From: Xiubo Li Date: Wed, 24 Sep 2014 14:30:29 +0800 Subject: spi: Fix possible ZERO_SIZE_PTR pointer dereferencing error. Since we cannot make sure the 'n' will always be none zero here, and then if either equal to zero, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the zero check before calling kzalloc(). Signed-off-by: Xiubo Li Signed-off-by: Mark Brown --- drivers/spi/spi.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 0edccc82ece5..cc83cdd969ce 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -552,6 +552,9 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n) struct boardinfo *bi; int i; + if (!n) + return -EINVAL; + bi = kzalloc(n * sizeof(*bi), GFP_KERNEL); if (!bi) return -ENOMEM; -- cgit v1.2.3 From db4fa45ed3182d8206af241811dfc99369ffa849 Mon Sep 17 00:00:00 2001 From: Anders Berg Date: Wed, 17 Sep 2014 08:46:58 +0200 Subject: spi: pl022: Add support for chip select extension Add support for a extended PL022 which has an extra register for controlling up to five chip select signals. This controller is found on the AXM5516 SoC. Unfortunately the PrimeCell identification registers are identical to a standard ARM PL022. To work around this, the peripheral ID must be overridden in the device tree using the "arm,primecell-periphid" property with the value 0x000b6022. Signed-off-by: Anders Berg Acked-by: Linus Walleij Acked-by: Russell King Signed-off-by: Mark Brown --- drivers/spi/spi-pl022.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 58 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 7f13f3f7198b..d0741b2eabb4 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -82,6 +82,7 @@ #define SSP_MIS(r) (r + 0x01C) #define SSP_ICR(r) (r + 0x020) #define SSP_DMACR(r) (r + 0x024) +#define SSP_CSR(r) (r + 0x030) /* vendor extension */ #define SSP_ITCR(r) (r + 0x080) #define SSP_ITIP(r) (r + 0x084) #define SSP_ITOP(r) (r + 0x088) @@ -197,6 +198,12 @@ /* Transmit DMA Enable bit */ #define SSP_DMACR_MASK_TXDMAE (0x1UL << 1) +/* + * SSP Chip Select Control Register - SSP_CSR + * (vendor extension) + */ +#define SSP_CSR_CSVALUE_MASK (0x1FUL << 0) + /* * SSP Integration Test control Register - SSP_ITCR */ @@ -313,6 +320,7 @@ enum ssp_writing { * @extended_cr: 32 bit wide control register 0 with extra * features and extra features in CR1 as found in the ST variants * @pl023: supports a subset of the ST extensions called "PL023" + * @internal_cs_ctrl: supports chip select control register */ struct vendor_data { int fifodepth; @@ -321,6 +329,7 @@ struct vendor_data { bool extended_cr; bool pl023; bool loopback; + bool internal_cs_ctrl; }; /** @@ -440,9 +449,32 @@ static void null_cs_control(u32 command) pr_debug("pl022: dummy chip select control, CS=0x%x\n", command); } +/** + * internal_cs_control - Control chip select signals via SSP_CSR. + * @pl022: SSP driver private data structure + * @command: select/delect the chip + * + * Used on controller with internal chip select control via SSP_CSR register + * (vendor extension). Each of the 5 LSB in the register controls one chip + * select signal. + */ +static void internal_cs_control(struct pl022 *pl022, u32 command) +{ + u32 tmp; + + tmp = readw(SSP_CSR(pl022->virtbase)); + if (command == SSP_CHIP_SELECT) + tmp &= ~BIT(pl022->cur_cs); + else + tmp |= BIT(pl022->cur_cs); + writew(tmp, SSP_CSR(pl022->virtbase)); +} + static void pl022_cs_control(struct pl022 *pl022, u32 command) { - if (gpio_is_valid(pl022->cur_cs)) + if (pl022->vendor->internal_cs_ctrl) + internal_cs_control(pl022, command); + else if (gpio_is_valid(pl022->cur_cs)) gpio_set_value(pl022->cur_cs, command); else pl022->cur_chip->cs_control(command); @@ -2122,6 +2154,9 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) if (platform_info->num_chipselect && platform_info->chipselects) { for (i = 0; i < num_cs; i++) pl022->chipselects[i] = platform_info->chipselects[i]; + } else if (pl022->vendor->internal_cs_ctrl) { + for (i = 0; i < num_cs; i++) + pl022->chipselects[i] = i; } else if (IS_ENABLED(CONFIG_OF)) { for (i = 0; i < num_cs; i++) { int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); @@ -2352,6 +2387,7 @@ static struct vendor_data vendor_arm = { .extended_cr = false, .pl023 = false, .loopback = true, + .internal_cs_ctrl = false, }; static struct vendor_data vendor_st = { @@ -2361,6 +2397,7 @@ static struct vendor_data vendor_st = { .extended_cr = true, .pl023 = false, .loopback = true, + .internal_cs_ctrl = false, }; static struct vendor_data vendor_st_pl023 = { @@ -2370,6 +2407,17 @@ static struct vendor_data vendor_st_pl023 = { .extended_cr = true, .pl023 = true, .loopback = false, + .internal_cs_ctrl = false, +}; + +static struct vendor_data vendor_lsi = { + .fifodepth = 8, + .max_bpw = 16, + .unidir = false, + .extended_cr = false, + .pl023 = false, + .loopback = true, + .internal_cs_ctrl = true, }; static struct amba_id pl022_ids[] = { @@ -2403,6 +2451,15 @@ static struct amba_id pl022_ids[] = { .mask = 0xffffffff, .data = &vendor_st_pl023, }, + { + /* + * PL022 variant that has a chip select control register whih + * allows control of 5 output signals nCS[0:4]. + */ + .id = 0x000b6022, + .mask = 0x000fffff, + .data = &vendor_lsi, + }, { 0, 0 }, }; -- cgit v1.2.3 From 90f90bbb6049db243289f31800e750b2ce160322 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Thu, 25 Sep 2014 13:32:24 +0200 Subject: spi: fsl-dspi: Remove probe info message Remove the probe info message which also has wrong output. No need to add KERN_INFO to pr_info. Output was: 6Freescale DSPI master initialized Signed-off-by: Alexander Stein Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index ebc4d1fd76e2..1cdef8e0876b 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -532,7 +532,6 @@ static int dspi_probe(struct platform_device *pdev) goto out_clk_put; } - pr_info(KERN_INFO "Freescale DSPI master initialized\n"); return ret; out_clk_put: -- cgit v1.2.3 From a24e70c0ac146f8bcae3cdb7f514950d5b32219e Mon Sep 17 00:00:00 2001 From: Addy Ke Date: Thu, 25 Sep 2014 14:59:41 +0800 Subject: spi/rockchip: fix bug that cause the failure to read data in DMA mode In my test on RK3288-pinky board, if spi is enabled, it will begin to read data from slave regardless of whether the DMA is ready. So we need prepare DMA before spi is enable. Signed-off-by: Addy Ke Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-rockchip.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index c0743604b906..1fa4eda4b432 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -415,7 +415,7 @@ static void rockchip_spi_dma_txcb(void *data) spin_unlock_irqrestore(&rs->lock, flags); } -static int rockchip_spi_dma_transfer(struct rockchip_spi *rs) +static void rockchip_spi_prepare_dma(struct rockchip_spi *rs) { unsigned long flags; struct dma_slave_config rxconf, txconf; @@ -474,8 +474,6 @@ static int rockchip_spi_dma_transfer(struct rockchip_spi *rs) dmaengine_submit(txdesc); dma_async_issue_pending(rs->dma_tx.ch); } - - return 1; } static void rockchip_spi_config(struct rockchip_spi *rs) @@ -556,16 +554,17 @@ static int rockchip_spi_transfer_one( else if (rs->rx) rs->tmode = CR0_XFM_RO; - if (master->can_dma && master->can_dma(master, spi, xfer)) + /* we need prepare dma before spi was enabled */ + if (master->can_dma && master->can_dma(master, spi, xfer)) { rs->use_dma = 1; - else + rockchip_spi_prepare_dma(rs); + } else { rs->use_dma = 0; + } rockchip_spi_config(rs); - if (rs->use_dma) - ret = rockchip_spi_dma_transfer(rs); - else + if (!rs->use_dma) ret = rockchip_spi_pio_transfer(rs); return ret; -- cgit v1.2.3 From 933fc7b06ca62741fd5067edab13068d13b3cb35 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 26 Sep 2014 14:18:31 +0800 Subject: spi: bcm53xx: Fix module dependency config SPI_BCM53XX needs to depend on BCMA_POSSIBLE and select BCMA. This fixes below build error: ERROR: "bcma_driver_unregister" [drivers/spi/spi-bcm53xx.ko] undefined! ERROR: "__bcma_driver_register" [drivers/spi/spi-bcm53xx.ko] undefined! Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index b14b829fb45c..48abea54ddb6 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -115,6 +115,8 @@ config SPI_AU1550 config SPI_BCM53XX tristate "Broadcom BCM53xx SPI controller" depends on ARCH_BCM_5301X + depends on BCMA_POSSIBLE + select BCMA help Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs. -- cgit v1.2.3 From 61d38b9a823c96c7a27fca3924959b1feba04b45 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 26 Sep 2014 14:19:22 +0800 Subject: spi: bcm53xx: Add missing module information Mainly to fix missing MODULE_LICENSE. Also add MODULE_DESCRIPTION and MODULE_AUTHOR. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/spi/spi-bcm53xx.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c index e6600f783385..17b34cbadc03 100644 --- a/drivers/spi/spi-bcm53xx.c +++ b/drivers/spi/spi-bcm53xx.c @@ -293,3 +293,7 @@ static void __exit bcm53xxspi_module_exit(void) module_init(bcm53xxspi_module_init); module_exit(bcm53xxspi_module_exit); + +MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver"); +MODULE_AUTHOR("Rafał Miłecki "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From a31083600476ac11b656bbc70784767f231469ff Mon Sep 17 00:00:00 2001 From: Xiubo Li Date: Mon, 29 Sep 2014 10:57:06 +0800 Subject: spi: fsl: Sort include headers alphabetically Sort all the include headers alphabetically for the freescale spi drivers. If the inlcude headers sorted out of order, maybe the best logical choice is to append new ones after the exist ones, while this may create a lot of potential for duplicates and conflicts for each diffenent changes will add new headers in the same location. Signed-off-by: Xiubo Li Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-cpm.c | 14 +++++++------- drivers/spi/spi-fsl-dspi.c | 18 +++++++++--------- drivers/spi/spi-fsl-espi.c | 12 ++++++------ drivers/spi/spi-fsl-lib.c | 6 +++--- drivers/spi/spi-fsl-spi.c | 22 +++++++++++----------- 5 files changed, 36 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index 54b06376f03c..c5dd20beee22 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -15,17 +15,17 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include -#include -#include -#include -#include -#include #include #include +#include +#include +#include +#include +#include +#include -#include "spi-fsl-lib.h" #include "spi-fsl-cpm.h" +#include "spi-fsl-lib.h" #include "spi-fsl-spi.h" /* CPM1 and CPM2 are mutually exclusive. */ diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 5021ddf03f60..63c3859d24cf 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -13,22 +13,22 @@ * */ +#include +#include +#include +#include +#include +#include #include #include -#include -#include +#include +#include #include +#include #include #include -#include -#include -#include -#include #include #include -#include -#include -#include #define DRIVER_NAME "fsl-dspi" diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index 8ebd724e4c59..68b4254069c0 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -8,19 +8,19 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include #include -#include -#include -#include +#include #include +#include +#include +#include #include #include #include #include #include -#include -#include +#include +#include #include #include "spi-fsl-lib.h" diff --git a/drivers/spi/spi-fsl-lib.c b/drivers/spi/spi-fsl-lib.c index e0b773fc29cb..5ddb5b098e4e 100644 --- a/drivers/spi/spi-fsl-lib.c +++ b/drivers/spi/spi-fsl-lib.c @@ -16,10 +16,10 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include -#include -#include #include +#include +#include +#include #include #include #include diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 9452f6740997..c15a34ba71f5 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -19,25 +19,25 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include -#include -#include -#include #include -#include -#include -#include -#include -#include #include +#include +#include +#include +#include +#include #include +#include #include #include -#include #include #include -#include #include +#include +#include +#include +#include +#include #include "spi-fsl-lib.h" #include "spi-fsl-cpm.h" -- cgit v1.2.3 From df59fa7f4bca9658b75f0f5fee225b3a057475c5 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Sun, 28 Sep 2014 23:24:04 +1000 Subject: spi: orion: support armada extended baud rates The Armada SoC family implementation of this SPI hardware module has extended the configuration register to allow for a wider range of SPI clock rates. Specifically the Serial Baud Rate Pre-selection bits in the SPI Interface Configuration Register now also use bits 6 and 7 as well. Modify the baud rate calculation to handle these differences for the Armada case. Potentially a baud rate can be setup using a number of different pre-scalar and scalar combinations. This code tries all possible pre-scalar divisors (8 in total) to try and find the most accurate set. This change introduces (and documents) a new device tree compatible device name "armada-370-spi" to support this. Signed-off-by: Greg Ungerer Tested-by: Ezequiel Garcia Reviewed-by: Ezequiel Garcia Signed-off-by: Mark Brown --- drivers/spi/spi-orion.c | 116 +++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 94 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index c4675fa8b645..acf8e48db16c 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -40,13 +41,27 @@ #define ORION_SPI_MODE_CPHA (1 << 12) #define ORION_SPI_IF_8_16_BIT_MODE (1 << 5) #define ORION_SPI_CLK_PRESCALE_MASK 0x1F +#define ARMADA_SPI_CLK_PRESCALE_MASK 0xDF #define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \ ORION_SPI_MODE_CPHA) +enum orion_spi_type { + ORION_SPI, + ARMADA_SPI, +}; + +struct orion_spi_dev { + enum orion_spi_type typ; + unsigned int min_divisor; + unsigned int max_divisor; + u32 prescale_mask; +}; + struct orion_spi { struct spi_master *master; void __iomem *base; struct clk *clk; + const struct orion_spi_dev *devdata; }; static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg) @@ -83,30 +98,66 @@ static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed) u32 prescale; u32 reg; struct orion_spi *orion_spi; + const struct orion_spi_dev *devdata; orion_spi = spi_master_get_devdata(spi->master); + devdata = orion_spi->devdata; tclk_hz = clk_get_rate(orion_spi->clk); - /* - * the supported rates are: 4,6,8...30 - * round up as we look for equal or less speed - */ - rate = DIV_ROUND_UP(tclk_hz, speed); - rate = roundup(rate, 2); + if (devdata->typ == ARMADA_SPI) { + unsigned int clk, spr, sppr, sppr2, err; + unsigned int best_spr, best_sppr, best_err; + + best_err = speed; + best_spr = 0; + best_sppr = 0; + + /* Iterate over the valid range looking for best fit */ + for (sppr = 0; sppr < 8; sppr++) { + sppr2 = 0x1 << sppr; + + spr = tclk_hz / sppr2; + spr = DIV_ROUND_UP(spr, speed); + if ((spr == 0) || (spr > 15)) + continue; - /* check if requested speed is too small */ - if (rate > 30) - return -EINVAL; + clk = tclk_hz / (spr * sppr2); + err = speed - clk; - if (rate < 4) - rate = 4; + if (err < best_err) { + best_spr = spr; + best_sppr = sppr; + best_err = err; + } + } + + if ((best_sppr == 0) && (best_spr == 0)) + return -EINVAL; + + prescale = ((best_sppr & 0x6) << 5) | + ((best_sppr & 0x1) << 4) | best_spr; + } else { + /* + * the supported rates are: 4,6,8...30 + * round up as we look for equal or less speed + */ + rate = DIV_ROUND_UP(tclk_hz, speed); + rate = roundup(rate, 2); + + /* check if requested speed is too small */ + if (rate > 30) + return -EINVAL; - /* Convert the rate to SPI clock divisor value. */ - prescale = 0x10 + rate/2; + if (rate < 4) + rate = 4; + + /* Convert the rate to SPI clock divisor value. */ + prescale = 0x10 + rate/2; + } reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); - reg = ((reg & ~ORION_SPI_CLK_PRESCALE_MASK) | prescale); + reg = ((reg & ~devdata->prescale_mask) | prescale); writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); return 0; @@ -342,8 +393,31 @@ static int orion_spi_reset(struct orion_spi *orion_spi) return 0; } +static const struct orion_spi_dev orion_spi_dev_data = { + .typ = ORION_SPI, + .min_divisor = 4, + .max_divisor = 30, + .prescale_mask = ORION_SPI_CLK_PRESCALE_MASK, +}; + +static const struct orion_spi_dev armada_spi_dev_data = { + .typ = ARMADA_SPI, + .min_divisor = 1, + .max_divisor = 1920, + .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, +}; + +static const struct of_device_id orion_spi_of_match_table[] = { + { .compatible = "marvell,orion-spi", .data = &orion_spi_dev_data, }, + { .compatible = "marvell,armada-370-spi", .data = &armada_spi_dev_data, }, + {} +}; +MODULE_DEVICE_TABLE(of, orion_spi_of_match_table); + static int orion_spi_probe(struct platform_device *pdev) { + const struct of_device_id *of_id; + const struct orion_spi_dev *devdata; struct spi_master *master; struct orion_spi *spi; struct resource *r; @@ -378,6 +452,10 @@ static int orion_spi_probe(struct platform_device *pdev) spi = spi_master_get_devdata(master); spi->master = master; + of_id = of_match_device(orion_spi_of_match_table, &pdev->dev); + devdata = of_id->data; + spi->devdata = devdata; + spi->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(spi->clk)) { status = PTR_ERR(spi->clk); @@ -389,8 +467,8 @@ static int orion_spi_probe(struct platform_device *pdev) goto out; tclk_hz = clk_get_rate(spi->clk); - master->max_speed_hz = DIV_ROUND_UP(tclk_hz, 4); - master->min_speed_hz = DIV_ROUND_UP(tclk_hz, 30); + master->max_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->min_divisor); + master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); spi->base = devm_ioremap_resource(&pdev->dev, r); @@ -469,12 +547,6 @@ static const struct dev_pm_ops orion_spi_pm_ops = { NULL) }; -static const struct of_device_id orion_spi_of_match_table[] = { - { .compatible = "marvell,orion-spi", }, - {} -}; -MODULE_DEVICE_TABLE(of, orion_spi_of_match_table); - static struct platform_driver orion_spi_driver = { .driver = { .name = DRIVER_NAME, -- cgit v1.2.3 From 15ee3be78b017ee9d697fe59d45cdfbb35d9fdeb Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 2 Oct 2014 16:31:07 +0300 Subject: spi: dw-mid: change magic numbers to the constants Instead of using magic numbers in the code we create a bit map definition of the DMACR register and use it. There is no functional change. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-mid.c | 4 ++-- drivers/spi/spi-dw.h | 4 ++++ 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index ecae30fe28af..7bdf93747e5f 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -124,9 +124,9 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) dw_writew(dws, DW_SPI_DMARDLR, 0xf); dw_writew(dws, DW_SPI_DMATDLR, 0x10); if (dws->tx_dma) - dma_ctrl |= 0x2; + dma_ctrl |= SPI_DMA_TDMAE; if (dws->rx_dma) - dma_ctrl |= 0x1; + dma_ctrl |= SPI_DMA_RDMAE; dw_writew(dws, DW_SPI_DMACR, dma_ctrl); spi_enable_chip(dws, 1); } diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 089fc4ba3ace..83a103a76481 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -74,6 +74,10 @@ #define SPI_INT_RXFI (1 << 4) #define SPI_INT_MSTI (1 << 5) +/* Bit fields in DMACR */ +#define SPI_DMA_RDMAE (1 << 0) +#define SPI_DMA_TDMAE (1 << 1) + /* TX RX interrupt level threshold, max can be 256 */ #define SPI_INT_THRESHOLD 32 -- cgit v1.2.3 From 2a285299446cccbaf9ba47403e8f2ce578cd1ad1 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 2 Oct 2014 16:31:08 +0300 Subject: spi: dw-mid: convert to use DMAengine wrappers Instead of direct dereference to dmaengine callbacks we are going to use DMAengine wrappers. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-mid.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index 7bdf93747e5f..a507add6231e 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -113,8 +113,7 @@ static void dw_spi_dma_done(void *arg) static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) { - struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL; - struct dma_chan *txchan, *rxchan; + struct dma_async_tx_descriptor *txdesc, *rxdesc; struct dma_slave_config txconf, rxconf; u16 dma_ctrl = 0; @@ -132,8 +131,6 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) } dws->dma_chan_done = 0; - txchan = dws->txchan; - rxchan = dws->rxchan; /* 2. Prepare the TX dma transfer */ txconf.direction = DMA_MEM_TO_DEV; @@ -143,14 +140,13 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) txconf.dst_addr_width = dws->dma_width; txconf.device_fc = false; - txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, - (unsigned long) &txconf); + dmaengine_slave_config(dws->txchan, &txconf); memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl)); dws->tx_sgl.dma_address = dws->tx_dma; dws->tx_sgl.length = dws->len; - txdesc = dmaengine_prep_slave_sg(txchan, + txdesc = dmaengine_prep_slave_sg(dws->txchan, &dws->tx_sgl, 1, DMA_MEM_TO_DEV, @@ -166,14 +162,13 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) rxconf.src_addr_width = dws->dma_width; rxconf.device_fc = false; - rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, - (unsigned long) &rxconf); + dmaengine_slave_config(dws->rxchan, &rxconf); memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl)); dws->rx_sgl.dma_address = dws->rx_dma; dws->rx_sgl.length = dws->len; - rxdesc = dmaengine_prep_slave_sg(rxchan, + rxdesc = dmaengine_prep_slave_sg(dws->rxchan, &dws->rx_sgl, 1, DMA_DEV_TO_MEM, @@ -182,8 +177,8 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) rxdesc->callback_param = dws; /* rx must be started before tx due to spi instinct */ - rxdesc->tx_submit(rxdesc); - txdesc->tx_submit(txdesc); + dmaengine_submit(rxdesc); + dmaengine_submit(txdesc); return 0; } -- cgit v1.2.3 From f7477c2be8689ee8355db345f107744c9bd7f112 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 2 Oct 2014 16:31:09 +0300 Subject: spi: dw-mid: follow new DMAengine workflow Though intel-mid-dma does not follow a new DMA workflow (*) let's prepare SPI DW driver for that. (*) The client is obliged to call dma_async_issue_pending() which starts the actual transfers. Old DMA drivers do not follow this, since requirement was introduced in the discussion of [1]. [1] http://www.spinics.net/lists/arm-kernel/msg125987.html Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-mid.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index a507add6231e..46c6d58e1fda 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -150,7 +150,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) &dws->tx_sgl, 1, DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT); + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); txdesc->callback = dw_spi_dma_done; txdesc->callback_param = dws; @@ -172,13 +172,17 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) &dws->rx_sgl, 1, DMA_DEV_TO_MEM, - DMA_PREP_INTERRUPT); + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); rxdesc->callback = dw_spi_dma_done; rxdesc->callback_param = dws; /* rx must be started before tx due to spi instinct */ dmaengine_submit(rxdesc); + dma_async_issue_pending(dws->rxchan); + dmaengine_submit(txdesc); + dma_async_issue_pending(dws->txchan); + return 0; } -- cgit v1.2.3 From a44619c31c203257fe9704e41c714f35d9990018 Mon Sep 17 00:00:00 2001 From: Michael Heimpold Date: Thu, 2 Oct 2014 23:10:22 +0200 Subject: spi: spi-mxs: fix a tiny typo in a comment Signed-off-by: Michael Heimpold Signed-off-by: Mark Brown --- drivers/spi/spi-mxs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index 2884f0c2f5f0..74f2ba0ccf71 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -85,7 +85,7 @@ static int mxs_spi_setup_transfer(struct spi_device *dev, mxs_ssp_set_clk_rate(ssp, hz); /* * Save requested rate, hz, rather than the actual rate, - * ssp->clk_rate. Otherwise we would set the rate every trasfer + * ssp->clk_rate. Otherwise we would set the rate every transfer * when the actual rate is not quite the same as requested rate. */ spi->sck = hz; -- cgit v1.2.3