From f7bee80945155ad0326916486dabc38428c6cdef Mon Sep 17 00:00:00 2001 From: Krzysztof Wojcik Date: Mon, 14 Feb 2011 10:01:41 +1100 Subject: md: Fix raid1->raid0 takeover Takeover raid1->raid0 not succeded. Kernel message is shown: "md/raid0:md126: too few disks (1 of 2) - aborting!" Problem was that we weren't updating ->raid_disks for that takeover, unlike all the others. Signed-off-by: Krzysztof Wojcik Signed-off-by: NeilBrown --- drivers/md/raid0.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 637a96855edb..75671dfee551 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -670,6 +670,7 @@ static void *raid0_takeover_raid1(mddev_t *mddev) mddev->new_layout = 0; mddev->new_chunk_sectors = 128; /* by default set chunk size to 64k */ mddev->delta_disks = 1 - mddev->raid_disks; + mddev->raid_disks = 1; /* make sure it will be not marked as dirty */ mddev->recovery_cp = MaxSector; -- cgit v1.2.3 From 0f5cd45960173ba5b36727decbb4a241cbd35ef9 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Tue, 15 Feb 2011 21:29:32 +0530 Subject: ath9k: Fix ath9k prevents CPU to enter C3 states The DMA latency issue is observed only in Intel pinetrail platforms but in the driver we had a default PM-QOS value of 55. This caused unnecessary power consumption and battery drain in other platforms. Remove the pm-qos thing in the driver code and address the throughput issue in Intel pinetrail platfroms in user space using any one of the scripts in below links: http://www.kernel.org/pub/linux/kernel/people/mcgrof/scripts/cpudmalatency.c http://johannes.sipsolutions.net/files/netlatency.c.txt More details can be found in the following bugzilla link: https://bugzilla.kernel.org/show_bug.cgi?id=27532 This reverts the following commits: 98c316e348bedffa730e6f1e4baeb8a3c3e0f28b 4dc3530df7c0428b41c00399a7ee8c929406d181 10598c124ecabbbfd7522f74de19b8f7d52a1bee Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 6 ------ drivers/net/wireless/ath/ath9k/init.c | 8 -------- drivers/net/wireless/ath/ath9k/main.c | 8 -------- 3 files changed, 22 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 23838e37d45f..1a7fa6ea4cf5 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -21,7 +21,6 @@ #include #include #include -#include #include "debug.h" #include "common.h" @@ -57,8 +56,6 @@ struct ath_node; #define A_MAX(a, b) ((a) > (b) ? (a) : (b)) -#define ATH9K_PM_QOS_DEFAULT_VALUE 55 - #define TSF_TO_TU(_h,_l) \ ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) @@ -633,8 +630,6 @@ struct ath_softc { struct ath_descdma txsdma; struct ath_ant_comb ant_comb; - - struct pm_qos_request_list pm_qos_req; }; struct ath_wiphy { @@ -666,7 +661,6 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz) extern struct ieee80211_ops ath9k_ops; extern int ath9k_modparam_nohwcrypt; extern int led_blink; -extern int ath9k_pm_qos_value; extern bool is_ath9k_unloaded; irqreturn_t ath_isr(int irq, void *dev); diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 087a6a95edd5..a033d01bf8a0 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -41,10 +41,6 @@ static int ath9k_btcoex_enable; module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444); MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence"); -int ath9k_pm_qos_value = ATH9K_PM_QOS_DEFAULT_VALUE; -module_param_named(pmqos, ath9k_pm_qos_value, int, S_IRUSR | S_IRGRP | S_IROTH); -MODULE_PARM_DESC(pmqos, "User specified PM-QOS value"); - bool is_ath9k_unloaded; /* We use the hw_value as an index into our private channel structure */ @@ -762,9 +758,6 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid, ath_init_leds(sc); ath_start_rfkill_poll(sc); - pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, - PM_QOS_DEFAULT_VALUE); - return 0; error_world: @@ -831,7 +824,6 @@ void ath9k_deinit_device(struct ath_softc *sc) } ieee80211_unregister_hw(hw); - pm_qos_remove_request(&sc->pm_qos_req); ath_rx_cleanup(sc); ath_tx_cleanup(sc); ath9k_deinit_softc(sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index da5c64597c1f..a09d15f7aa6e 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1173,12 +1173,6 @@ static int ath9k_start(struct ieee80211_hw *hw) ath9k_btcoex_timer_resume(sc); } - /* User has the option to provide pm-qos value as a module - * parameter rather than using the default value of - * 'ATH9K_PM_QOS_DEFAULT_VALUE'. - */ - pm_qos_update_request(&sc->pm_qos_req, ath9k_pm_qos_value); - if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en) common->bus_ops->extn_synch_en(common); @@ -1345,8 +1339,6 @@ static void ath9k_stop(struct ieee80211_hw *hw) sc->sc_flags |= SC_OP_INVALID; - pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE); - mutex_unlock(&sc->mutex); ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n"); -- cgit v1.2.3 From cbe6ef1d2622e08e272600b3cb6040bed60f0450 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 16 Feb 2011 13:58:38 +1100 Subject: md: don't set_capacity before array is active. If the desired size of an array is set (via sysfs) before the array is active (which is the normal sequence), we currrently call set_capacity immediately. This means that a subsequent 'open' (as can be caused by some udev-triggers program) will notice the new size and try to probe for partitions. However as the array isn't quite ready yet the read will fail. Then when the array is read, as the size doesn't change again we don't try to re-probe. So when setting array size via sysfs, only call set_capacity if the array is already active. Signed-off-by: NeilBrown --- drivers/md/md.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 0cc30ecda4c1..6818ff4aa8d6 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4138,10 +4138,10 @@ array_size_store(mddev_t *mddev, const char *buf, size_t len) } mddev->array_sectors = sectors; - set_capacity(mddev->gendisk, mddev->array_sectors); - if (mddev->pers) + if (mddev->pers) { + set_capacity(mddev->gendisk, mddev->array_sectors); revalidate_disk(mddev->gendisk); - + } return len; } -- cgit v1.2.3 From 8f5f02c460b7ca74ce55ce126ce0c1e58a3f923d Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 16 Feb 2011 13:58:51 +1100 Subject: md: correctly handle probe of an 'mdp' device. 'mdp' devices are md devices with preallocated device numbers for partitions. As such it is possible to mknod and open a partition before opening the whole device. this causes md_probe() to be called with a device number of a partition, which in-turn calls mddev_find with such a number. However mddev_find expects the number of a 'whole device' and does the wrong thing with partition numbers. So add code to mddev_find to remove the 'partition' part of a device number and just work with the 'whole device'. This patch addresses https://bugzilla.kernel.org/show_bug.cgi?id=28652 Reported-by: hkmaly@bigfoot.com Signed-off-by: NeilBrown Cc: --- drivers/md/md.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 6818ff4aa8d6..330addfe9b77 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -553,6 +553,9 @@ static mddev_t * mddev_find(dev_t unit) { mddev_t *mddev, *new = NULL; + if (unit && MAJOR(unit) != MD_MAJOR) + unit &= ~((1< Date: Fri, 11 Feb 2011 13:00:06 +0100 Subject: Bluetooth: fix crash with quirky dongles doing sound Quirky dongles sometimes do not use the iso interface which causes a crash with runtime PM Signed-off-by: Oliver Neukum Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/btusb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 4cefa91e6c34..664f1cc9f8d4 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -829,7 +829,7 @@ static void btusb_work(struct work_struct *work) if (hdev->conn_hash.sco_num > 0) { if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) { - err = usb_autopm_get_interface(data->isoc); + err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf); if (err < 0) { clear_bit(BTUSB_ISOC_RUNNING, &data->flags); usb_kill_anchored_urbs(&data->isoc_anchor); @@ -858,7 +858,7 @@ static void btusb_work(struct work_struct *work) __set_isoc_interface(hdev, 0); if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags)) - usb_autopm_put_interface(data->isoc); + usb_autopm_put_interface(data->isoc ? data->isoc : data->intf); } } -- cgit v1.2.3 From e9036e336a8e5640871e0006ea4a89982b25046f Mon Sep 17 00:00:00 2001 From: "Cho, Yu-Chen" Date: Tue, 15 Feb 2011 10:20:07 +0800 Subject: Bluetooth: Add Atheros BT AR5BBU12 fw supported Add the btusb.c blacklist [0489:e02c] for Atheros AR5BBU12 BT and add to ath3k.c supported this device. Signed-off-by: Cho, Yu-Chen Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/ath3k.c | 3 +++ drivers/bluetooth/btusb.c | 3 +++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 333c21289d97..6dcd55a74c0a 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -41,6 +41,9 @@ static struct usb_device_id ath3k_table[] = { /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03F0, 0x311D) }, + + /* Atheros AR5BBU12 with sflash firmware */ + { USB_DEVICE(0x0489, 0xE02C) }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 664f1cc9f8d4..b7f2f373c631 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -105,6 +105,9 @@ static struct usb_device_id blacklist_table[] = { /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, + /* Atheros AR5BBU12 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, + /* Broadcom BCM2035 */ { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, -- cgit v1.2.3 From 5990378b393429244559f4750f2ee3a50929b932 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 11 Feb 2011 10:00:02 +0200 Subject: usb: musb: fix build breakage commit 0662481855c389b75a0a54c32870cc90563d80a9 (usb: musb: disable double buffering when it's broken), introduced a compile error when gadget API is disabled. Fix it. Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index d74a8113ae74..e6400be8a0f8 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -488,6 +488,15 @@ struct musb { unsigned set_address:1; unsigned test_mode:1; unsigned softconnect:1; + + u8 address; + u8 test_mode_nr; + u16 ackpend; /* ep0 */ + enum musb_g_ep0_state ep0_state; + struct usb_gadget g; /* the gadget */ + struct usb_gadget_driver *gadget_driver; /* its driver */ +#endif + /* * FIXME: Remove this flag. * @@ -501,14 +510,6 @@ struct musb { */ unsigned double_buffer_not_ok:1 __deprecated; - u8 address; - u8 test_mode_nr; - u16 ackpend; /* ep0 */ - enum musb_g_ep0_state ep0_state; - struct usb_gadget g; /* the gadget */ - struct usb_gadget_driver *gadget_driver; /* its driver */ -#endif - struct musb_hdrc_config *config; #ifdef MUSB_CONFIG_PROC_FS -- cgit v1.2.3 From b193b412e62b134adf69af286c7e7f8e99259350 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 11 Feb 2011 16:57:08 +0100 Subject: usb: musb: omap2430: fix kernel panic on reboot Cancel idle timer in musb_platform_exit. The idle timer could trigger after clock had been disabled leading to kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37. The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled later, and only if compiled as a module, and the offending memory access has moved) but the timer should be cancelled nonetheless. Rebooting... musb_hdrc musb_hdrc: remove, state 4 usb usb1: USB disconnect, address 1 musb_hdrc musb_hdrc: USB bus 1 deregistered Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 Internal error: : 1028 [#1] PREEMPT last sysfs file: /sys/kernel/uevent_seqnum Modules linked in: CPU: 0 Not tainted (2.6.37+ #6) PC is at musb_do_idle+0x24/0x138 LR is at musb_do_idle+0x18/0x138 pc : [] lr : [] psr: 80000193 sp : cf2bdd80 ip : cf2bdd80 fp : c048a20c r10: c048a60c r9 : c048a40c r8 : cf85e110 r7 : cf2bc000 r6 : 40000113 r5 : c0489800 r4 : cf85e110 r3 : 00000004 r2 : 00000006 r1 : fa0ab000 r0 : cf8a7000 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8faac019 DAC: 00000015 Process reboot (pid: 769, stack limit = 0xcf2bc2f0) Stack: (0xcf2bdd80 to 0xcf2be000) dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8 dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000 ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000 de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608 de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8 dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000 dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08 df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18 df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28 df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08 df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80 df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004 dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000 dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001 dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000 [] (musb_do_idle+0x24/0x138) from [] (run_timer_softirq+0x1a8/0x26) [] (run_timer_softirq+0x1a8/0x26c) from [] (__do_softirq+0x88/0x13) [] (__do_softirq+0x88/0x138) from [] (irq_exit+0x44/0x98) [] (irq_exit+0x44/0x98) from [] (asm_do_IRQ+0x7c/0xa0) [] (asm_do_IRQ+0x7c/0xa0) from [] (__irq_svc+0x48/0xa8) Exception stack(0xcf2bde20 to 0xcf2bde68) de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff [] (__irq_svc+0x48/0xa8) from [] (sub_preempt_count+0x0/0xb8) Code: ebf86030 e5940098 e594108c e5902010 (e5d13060) ---[ end trace 3689c0d808f9bf7c ]--- Kernel panic - not syncing: Fatal exception in interrupt Cc: stable@kernel.org Signed-off-by: Johan Hovold Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index a3f12333fc41..bc8badd16897 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -362,6 +362,7 @@ static int omap2430_musb_init(struct musb *musb) static int omap2430_musb_exit(struct musb *musb) { + del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); otg_put_transceiver(musb->xceiv); -- cgit v1.2.3 From 3c18e30f87ac5466bddbb05cf955605efd7db025 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 17 Feb 2011 10:26:38 -0500 Subject: USB: add quirks entry for Keytouch QWERTY Panel This patch (as1448) adds a quirks entry for the Keytouch QWERTY Panel firmware, used in the IEC 60945 keyboard. This device crashes during enumeration when the computer asks for its configuration string descriptor. Signed-off-by: Alan Stern Tested-by: kholis CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 44c595432d6f..92ce90b83126 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -68,6 +68,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Keytouch QWERTY Panel keyboard */ + { USB_DEVICE(0x0926, 0x3333), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, -- cgit v1.2.3 From acb52cb1613e1d3c8a8c650717cc51965c60d7d4 Mon Sep 17 00:00:00 2001 From: Maciej Szmigiero Date: Mon, 7 Feb 2011 12:42:36 +0100 Subject: USB: Add Samsung SGH-I500/Android modem ID switch to visor driver [USB]Add Samsung SGH-I500/Android modem ID switch to visor driver Samsung decided to reuse USB ID of its old CDMA phone SGH-I500 for the modem part of some of their Android phones. At least Galaxy Spica is affected. This modem needs ACM driver and does not work with visor driver which binds the conflicting ID for SGH-I500. Because SGH-I500 is pretty an old hardware its best to add switch to visor driver in cause somebody still wants to use that phone with Linux. Note that this is needed only when using the Android phone as modem, not in USB storage or ADB mode. Signed-off-by: Maciej Szmigiero Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/visor.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 15a5d89b7f39..1c11959a7d58 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "visor.h" /* @@ -479,6 +480,17 @@ static int visor_probe(struct usb_serial *serial, dbg("%s", __func__); + /* + * some Samsung Android phones in modem mode have the same ID + * as SPH-I500, but they are ACM devices, so dont bind to them + */ + if (id->idVendor == SAMSUNG_VENDOR_ID && + id->idProduct == SAMSUNG_SPH_I500_ID && + serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM && + serial->dev->descriptor.bDeviceSubClass == + USB_CDC_SUBCLASS_ACM) + return -ENODEV; + if (serial->dev->actconfig->desc.bConfigurationValue != 1) { dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", serial->dev->actconfig->desc.bConfigurationValue); -- cgit v1.2.3 From 72a012ce0a02c6c616676a24b40ff81d1aaeafda Mon Sep 17 00:00:00 2001 From: Maciej Szmigiero Date: Sat, 5 Feb 2011 21:52:00 +0100 Subject: USB: Add quirk for Samsung Android phone modem My Galaxy Spica needs this quirk when in modem mode, otherwise it causes endless USB bus resets and is unusable in this mode. Unfortunately Samsung decided to reuse ID of its old CDMA phone SGH-I500 for the modem part. That's why in addition to this patch the visor driver must be prevented from binding to SPH-I500 ID, so ACM driver can do that. Signed-off-by: Maciej Szmigiero Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 92ce90b83126..81ce6a8e1d94 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -48,6 +48,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04b4, 0x0526), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Samsung Android phone modem - ID conflict with SPH-I500 */ + { USB_DEVICE(0x04e8, 0x6601), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3 From 637d11bfb814637ec7b81e878db3ffea6408a89a Mon Sep 17 00:00:00 2001 From: Luben Tuikov Date: Fri, 11 Feb 2011 11:33:10 -0800 Subject: USB: Reset USB 3.0 devices on (re)discovery If the device isn't reset, the XHCI HCD sends SET ADDRESS to address 0 while the device is already in Addressed state, and the request is dropped on the floor as it is addressed to the default address. This sequence of events, which this patch fixes looks like this: usb_reset_and_verify_device() hub_port_init() hub_set_address() SET_ADDRESS to 0 with 1 usb_get_device_descriptor(udev, 8) usb_get_device_descriptor(udev, 18) descriptors_changed() --> goto re_enumerate: hub_port_logical_disconnect() kick_khubd() And then: hub_events() hub_port_connect_change() usb_disconnect() usb_disable_device() new device struct sets device state to Powered choose_address() hub_port_init() <-- no reset, but SET ADDRESS to 0 with 1, timeout! The solution is to always reset the device in hub_port_init() to put it in a known state. Signed-off-by: Luben Tuikov Cc: Sarah Sharp Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d041c6826e43..0f299b7aad60 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2681,17 +2681,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - if (!udev->config && oldspeed == USB_SPEED_SUPER) { - /* Don't reset USB 3.0 devices during an initial setup */ - usb_set_device_state(udev, USB_STATE_DEFAULT); - } else { - /* Reset the device; full speed may morph to high speed */ - /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ - retval = hub_port_reset(hub, port1, udev, delay); - if (retval < 0) /* error or disconnect */ - goto fail; - /* success, speed is known */ - } + /* Reset the device; full speed may morph to high speed */ + /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ + retval = hub_port_reset(hub, port1, udev, delay); + if (retval < 0) /* error or disconnect */ + goto fail; + /* success, speed is known */ + retval = -ENODEV; if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) { -- cgit v1.2.3 From 38237fd2be9421c104f84cc35665097bdce89013 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Feb 2011 15:55:07 +0100 Subject: USB: serial/usb_wwan, fix tty NULL dereference tty_port_tty_get may return without any problems NULL. Handle this case and do not oops in usb_wwan_indat_callback by dereferencing it. The oops: Unable to handle kernel paging request for data at address 0x000000d8 Faulting instruction address: 0xc0175b3c Oops: Kernel access of bad area, sig: 11 [#1] PowerPC 40x Platform last sysfs file: /sys/devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:09.2/usb1/idVendor Modules linked in: NIP: c0175b3c LR: c0175e7c CTR: c0215c90 REGS: c77f7d50 TRAP: 0300 Not tainted (2.6.37-rc5) MSR: 00021030 CR: 88482028 XER: 2000005f DEAR: 000000d8, ESR: 00000000 TASK = c7141b90[1149] 'wvdial' THREAD: c2750000 GPR00: 00021030 c77f7e00 c7141b90 00000000 0000000e 00000000 0000000e c0410680 GPR08: c683db00 00000000 00000001 c03c81f8 88482028 10073ef4 ffffffb9 ffffff94 GPR16: 00000000 fde036c0 00200200 00100100 00000001 ffffff8d c34fabcc 00000000 GPR24: c71120d4 00000000 00000000 0000000e 00021030 00000000 00000000 0000000e NIP [c0175b3c] tty_buffer_request_room+0x2c/0x194 LR [c0175e7c] tty_insert_flip_string_fixed_flag+0x3c/0xb0 Call Trace: [c77f7e00] [00000003] 0x3 (unreliable) [c77f7e30] [c0175e7c] tty_insert_flip_string_fixed_flag+0x3c/0xb0 [c77f7e60] [c0215df4] usb_wwan_indat_callback+0x164/0x170 ... References: https://bugzilla.kernel.org/show_bug.cgi?id=24582 Cc: Amit Shah Cc: baoyb Signed-off-by: Jiri Slaby Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index b004b2a485c3..9c014e2ecd68 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -295,12 +295,15 @@ static void usb_wwan_indat_callback(struct urb *urb) __func__, status, endpoint); } else { tty = tty_port_tty_get(&port->port); - if (urb->actual_length) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); - } else - dbg("%s: empty read urb received", __func__); - tty_kref_put(tty); + if (tty) { + if (urb->actual_length) { + tty_insert_flip_string(tty, data, + urb->actual_length); + tty_flip_buffer_push(tty); + } else + dbg("%s: empty read urb received", __func__); + tty_kref_put(tty); + } /* Resubmit urb so we continue receiving */ if (status != -ESHUTDOWN) { -- cgit v1.2.3 From e1dc5157c574e7249dc1cd072fde2e48b3011533 Mon Sep 17 00:00:00 2001 From: Jon Thomas Date: Wed, 16 Feb 2011 11:02:34 -0500 Subject: sierra: add new ID for Airprime/Sierra USB IP modem I picked up a new Sierra usb 308 (At&t Shockwave) on 2/2011 and the vendor code is 0x0f3d Looking up vendor and product id's I see: 0f3d Airprime, Incorporated 0112 CDMA 1xEVDO PC Card, PC 5220 Sierra and Airprime are somehow related and I'm guessing the At&t usb 308 might be have some common hardware with the AirPrime SL809x. Signed-off-by: Jon Thomas Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 7481ff8a49e4..0457813eebee 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -301,6 +301,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, + { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */ + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */ { } -- cgit v1.2.3 From 19b9a83e214d3d3ac52a56daca5ea0d033ca47bc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 11 Feb 2011 16:57:08 +0100 Subject: USB: musb: omap2430: fix kernel panic on reboot Cancel idle timer in musb_platform_exit. The idle timer could trigger after clock had been disabled leading to kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37. The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled later, and only if compiled as a module, and the offending memory access has moved) but the timer should be cancelled nonetheless. Rebooting... musb_hdrc musb_hdrc: remove, state 4 usb usb1: USB disconnect, address 1 musb_hdrc musb_hdrc: USB bus 1 deregistered Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 Internal error: : 1028 [#1] PREEMPT last sysfs file: /sys/kernel/uevent_seqnum Modules linked in: CPU: 0 Not tainted (2.6.37+ #6) PC is at musb_do_idle+0x24/0x138 LR is at musb_do_idle+0x18/0x138 pc : [] lr : [] psr: 80000193 sp : cf2bdd80 ip : cf2bdd80 fp : c048a20c r10: c048a60c r9 : c048a40c r8 : cf85e110 r7 : cf2bc000 r6 : 40000113 r5 : c0489800 r4 : cf85e110 r3 : 00000004 r2 : 00000006 r1 : fa0ab000 r0 : cf8a7000 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8faac019 DAC: 00000015 Process reboot (pid: 769, stack limit = 0xcf2bc2f0) Stack: (0xcf2bdd80 to 0xcf2be000) dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8 dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000 ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000 de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608 de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8 dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000 dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08 df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18 df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28 df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08 df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80 df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004 dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000 dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001 dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000 [] (musb_do_idle+0x24/0x138) from [] (run_timer_softirq+0x1a8/0x26) [] (run_timer_softirq+0x1a8/0x26c) from [] (__do_softirq+0x88/0x13) [] (__do_softirq+0x88/0x138) from [] (irq_exit+0x44/0x98) [] (irq_exit+0x44/0x98) from [] (asm_do_IRQ+0x7c/0xa0) [] (asm_do_IRQ+0x7c/0xa0) from [] (__irq_svc+0x48/0xa8) Exception stack(0xcf2bde20 to 0xcf2bde68) de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff [] (__irq_svc+0x48/0xa8) from [] (sub_preempt_count+0x0/0xb8) Code: ebf86030 e5940098 e594108c e5902010 (e5d13060) ---[ end trace 3689c0d808f9bf7c ]--- Kernel panic - not syncing: Fatal exception in interrupt Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index a3f12333fc41..bc8badd16897 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -362,6 +362,7 @@ static int omap2430_musb_init(struct musb *musb) static int omap2430_musb_exit(struct musb *musb) { + del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); otg_put_transceiver(musb->xceiv); -- cgit v1.2.3 From 9ce4f80fb67b47b96c647ac6280a06dbd4bb50d2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Feb 2011 14:39:36 -0800 Subject: Revert "USB: Reset USB 3.0 devices on (re)discovery" This reverts commit 637d11bfb814637ec7b81e878db3ffea6408a89a. Sarah wants to tweak it some more before it's applied to the tree. Cc: Luben Tuikov Cc: Sarah Sharp Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0f299b7aad60..d041c6826e43 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2681,13 +2681,17 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - /* Reset the device; full speed may morph to high speed */ - /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ - retval = hub_port_reset(hub, port1, udev, delay); - if (retval < 0) /* error or disconnect */ - goto fail; - /* success, speed is known */ - + if (!udev->config && oldspeed == USB_SPEED_SUPER) { + /* Don't reset USB 3.0 devices during an initial setup */ + usb_set_device_state(udev, USB_STATE_DEFAULT); + } else { + /* Reset the device; full speed may morph to high speed */ + /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ + retval = hub_port_reset(hub, port1, udev, delay); + if (retval < 0) /* error or disconnect */ + goto fail; + /* success, speed is known */ + } retval = -ENODEV; if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) { -- cgit v1.2.3 From 4e8b65f606b9e4e6922fd17a772fe3e69cc5553b Mon Sep 17 00:00:00 2001 From: Rakesh Iyer Date: Fri, 18 Feb 2011 08:38:02 -0800 Subject: Input: tegra-kbc - add function keymap Add Fn keymap support to allow for internal processing of Fn keys. Signed-off-by: Rakesh Iyer Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tegra-kbc.c | 62 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 59 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index ac471b77c18e..99ce9032d08c 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -71,8 +71,9 @@ struct tegra_kbc { spinlock_t lock; unsigned int repoll_dly; unsigned long cp_dly_jiffies; + bool use_fn_map; const struct tegra_kbc_platform_data *pdata; - unsigned short keycode[KBC_MAX_KEY]; + unsigned short keycode[KBC_MAX_KEY * 2]; unsigned short current_keys[KBC_MAX_KPENT]; unsigned int num_pressed_keys; struct timer_list timer; @@ -178,6 +179,40 @@ static const u32 tegra_kbc_default_keymap[] = { KEY(15, 5, KEY_F2), KEY(15, 6, KEY_CAPSLOCK), KEY(15, 7, KEY_F6), + + /* Software Handled Function Keys */ + KEY(20, 0, KEY_KP7), + + KEY(21, 0, KEY_KP9), + KEY(21, 1, KEY_KP8), + KEY(21, 2, KEY_KP4), + KEY(21, 4, KEY_KP1), + + KEY(22, 1, KEY_KPSLASH), + KEY(22, 2, KEY_KP6), + KEY(22, 3, KEY_KP5), + KEY(22, 4, KEY_KP3), + KEY(22, 5, KEY_KP2), + KEY(22, 7, KEY_KP0), + + KEY(27, 1, KEY_KPASTERISK), + KEY(27, 3, KEY_KPMINUS), + KEY(27, 4, KEY_KPPLUS), + KEY(27, 5, KEY_KPDOT), + + KEY(28, 5, KEY_VOLUMEUP), + + KEY(29, 3, KEY_HOME), + KEY(29, 4, KEY_END), + KEY(29, 5, KEY_BRIGHTNESSDOWN), + KEY(29, 6, KEY_VOLUMEDOWN), + KEY(29, 7, KEY_BRIGHTNESSUP), + + KEY(30, 0, KEY_NUMLOCK), + KEY(30, 1, KEY_SCROLLLOCK), + KEY(30, 2, KEY_MUTE), + + KEY(31, 4, KEY_HELP), }; static const struct matrix_keymap_data tegra_kbc_default_keymap_data = { @@ -224,6 +259,7 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) unsigned int i; unsigned int num_down = 0; unsigned long flags; + bool fn_keypress = false; spin_lock_irqsave(&kbc->lock, flags); for (i = 0; i < KBC_MAX_KPENT; i++) { @@ -237,11 +273,28 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) MATRIX_SCAN_CODE(row, col, KBC_ROW_SHIFT); scancodes[num_down] = scancode; - keycodes[num_down++] = kbc->keycode[scancode]; + keycodes[num_down] = kbc->keycode[scancode]; + /* If driver uses Fn map, do not report the Fn key. */ + if ((keycodes[num_down] == KEY_FN) && kbc->use_fn_map) + fn_keypress = true; + else + num_down++; } val >>= 8; } + + /* + * If the platform uses Fn keymaps, translate keys on a Fn keypress. + * Function keycodes are KBC_MAX_KEY apart from the plain keycodes. + */ + if (fn_keypress) { + for (i = 0; i < num_down; i++) { + scancodes[i] += KBC_MAX_KEY; + keycodes[i] = kbc->keycode[scancodes[i]]; + } + } + spin_unlock_irqrestore(&kbc->lock, flags); tegra_kbc_report_released_keys(kbc->idev, @@ -594,8 +647,11 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev) input_dev->keycode = kbc->keycode; input_dev->keycodesize = sizeof(kbc->keycode[0]); - input_dev->keycodemax = ARRAY_SIZE(kbc->keycode); + input_dev->keycodemax = KBC_MAX_KEY; + if (pdata->use_fn_map) + input_dev->keycodemax *= 2; + kbc->use_fn_map = pdata->use_fn_map; keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data; matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT, input_dev->keycode, input_dev->keybit); -- cgit v1.2.3 From 00781a74ee34222ee3cdc36d4f3d9c844dddbd27 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Fri, 18 Feb 2011 14:27:09 +0100 Subject: wireless: rt2x00: rt2800pci.c: add two ids taken two RT35XX EDIMAX from DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217 Signed-off-by: Xose Vazquez Perez Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index aa97971a38af..7951cdaa9c01 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1065,6 +1065,8 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = { { PCI_DEVICE(0x1814, 0x3390), PCI_DEVICE_DATA(&rt2800pci_ops) }, #endif #ifdef CONFIG_RT2800PCI_RT35XX + { PCI_DEVICE(0x1432, 0x7711), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7722), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) }, -- cgit v1.2.3 From 28bec7b845e10b68e6ba1ade5de0fc566690fc61 Mon Sep 17 00:00:00 2001 From: Nikolay Ledovskikh Date: Fri, 18 Feb 2011 19:59:53 +0300 Subject: ath5k: Correct channel setting for AR2317 chip Correct channel setting function must be used for AR2317. When I tested ahb patch on bullet2 all seemed to work fine, but it couldn't connect another host (using ibss for example). During an analysis I observed that it's transmitting on another channel. I looked into madwifi code and understood that the problem is in channel setting function. So atheros RF2317 not fully handled in the current ath5k version and must be patched. Signed-off-by: Nikolay Ledovskikh Acked-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/phy.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 78c26fdccad1..c44111fc98b7 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1253,6 +1253,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah, case AR5K_RF5111: ret = ath5k_hw_rf5111_channel(ah, channel); break; + case AR5K_RF2317: case AR5K_RF2425: ret = ath5k_hw_rf2425_channel(ah, channel); break; -- cgit v1.2.3 From d5bb2923cfa0a29c5854f9618703ff60849b949e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 13 Feb 2011 13:12:10 +0100 Subject: drivers/char/pcmcia/ipwireless/main.c: Convert release_resource to release_region/release_mem_region Request_region should be used with release_region, not release_resource. This patch contains a number of changes, related to calls to request_region, request_mem_region, and the associated error handling code. 1. For the call to request_region, the variable io_resource storing the result is dropped. The call to release_resource at the end of the function is changed to a call to release_region with the first two arguments of request_region as its arguments. The same call to release_region is also added to release_ipwireless. 2. The first call to request_mem_region is now tested and ret is set to -EBUSY if the the call has failed. This call was associated with the initialization of ipw->attr_memory. But the error handling code was testing ipw->common_memory. The definition of release_ipwireless also suggests that this call should be associated with ipw->common_memory, not ipw->attr_memory. 3. The second call to request_mem_region is now tested and ret is set to -EBUSY if the the call has failed. 4. The various gotos to the error handling code is adjusted so that there is no need for ifs. 5. Return the value stored in the ret variable rather than -1. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,E; @@ ( *x = request_region(...) | *x = request_mem_region(...) ) ... when != release_region(x) when != x = E * release_resource(x); // Signed-off-by: Julia Lawall Signed-off-by: Jiri Kosina Signed-off-by: Dominik Brodowski --- drivers/char/pcmcia/ipwireless/main.c | 52 +++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 94b8eb4d691d..444155a305ae 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -78,7 +78,6 @@ static void signalled_reboot_callback(void *callback_data) static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) { struct ipw_dev *ipw = priv_data; - struct resource *io_resource; int ret; p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; @@ -92,9 +91,12 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) if (ret) return ret; - io_resource = request_region(p_dev->resource[0]->start, - resource_size(p_dev->resource[0]), - IPWIRELESS_PCCARD_NAME); + if (!request_region(p_dev->resource[0]->start, + resource_size(p_dev->resource[0]), + IPWIRELESS_PCCARD_NAME)) { + ret = -EBUSY; + goto exit; + } p_dev->resource[2]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE; @@ -105,22 +107,25 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr); if (ret != 0) - goto exit2; + goto exit1; ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100; - ipw->attr_memory = ioremap(p_dev->resource[2]->start, + ipw->common_memory = ioremap(p_dev->resource[2]->start, resource_size(p_dev->resource[2])); - request_mem_region(p_dev->resource[2]->start, - resource_size(p_dev->resource[2]), - IPWIRELESS_PCCARD_NAME); + if (!request_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2]), + IPWIRELESS_PCCARD_NAME)) { + ret = -EBUSY; + goto exit2; + } p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | WIN_ENABLE; p_dev->resource[3]->end = 0; /* this used to be 0x1000 */ ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0); if (ret != 0) - goto exit2; + goto exit3; ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0); if (ret != 0) @@ -128,23 +133,28 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) ipw->attr_memory = ioremap(p_dev->resource[3]->start, resource_size(p_dev->resource[3])); - request_mem_region(p_dev->resource[3]->start, - resource_size(p_dev->resource[3]), - IPWIRELESS_PCCARD_NAME); + if (!request_mem_region(p_dev->resource[3]->start, + resource_size(p_dev->resource[3]), + IPWIRELESS_PCCARD_NAME)) { + ret = -EBUSY; + goto exit4; + } return 0; +exit4: + iounmap(ipw->attr_memory); exit3: + release_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); exit2: - if (ipw->common_memory) { - release_mem_region(p_dev->resource[2]->start, - resource_size(p_dev->resource[2])); - iounmap(ipw->common_memory); - } + iounmap(ipw->common_memory); exit1: - release_resource(io_resource); + release_region(p_dev->resource[0]->start, + resource_size(p_dev->resource[0])); +exit: pcmcia_disable_device(p_dev); - return -1; + return ret; } static int config_ipwireless(struct ipw_dev *ipw) @@ -219,6 +229,8 @@ exit: static void release_ipwireless(struct ipw_dev *ipw) { + release_region(ipw->link->resource[0]->start, + resource_size(ipw->link->resource[0])); if (ipw->common_memory) { release_mem_region(ipw->link->resource[2]->start, resource_size(ipw->link->resource[2])); -- cgit v1.2.3 From 5b703683b6cc3cb97bbe6b1b14898b273eb59279 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 4 Feb 2011 09:03:43 +0100 Subject: pcmcia vs. MECR on pxa25x/sa1111 After 2.6.34 changes, __pxa2xx_drv_pcmcia_probe() was replaced by sa1111_pcmcia_add(). That unfortunately means that configure_sockets() is not called, leading to MECR not being set properly, leading to strange crashes. Tested on pxa255+sa1111, I do not have lubbock board nearby. Perhaps cleaner solution exists? Signed-off-by: Pavel Machek Signed-off-by: Dominik Brodowski --- drivers/pcmcia/pxa2xx_base.c | 2 +- drivers/pcmcia/pxa2xx_base.h | 1 + drivers/pcmcia/pxa2xx_lubbock.c | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 3755e7c8c715..2c540542b5af 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -215,7 +215,7 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt, } #endif -static void pxa2xx_configure_sockets(struct device *dev) +void pxa2xx_configure_sockets(struct device *dev) { struct pcmcia_low_level *ops = dev->platform_data; /* diff --git a/drivers/pcmcia/pxa2xx_base.h b/drivers/pcmcia/pxa2xx_base.h index bb62ea87b8f9..b609b45469ed 100644 --- a/drivers/pcmcia/pxa2xx_base.h +++ b/drivers/pcmcia/pxa2xx_base.h @@ -1,3 +1,4 @@ int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt); void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops); +void pxa2xx_configure_sockets(struct device *dev); diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c index b9f8c8fb42bd..25afe637c657 100644 --- a/drivers/pcmcia/pxa2xx_lubbock.c +++ b/drivers/pcmcia/pxa2xx_lubbock.c @@ -226,6 +226,7 @@ int pcmcia_lubbock_init(struct sa1111_dev *sadev) lubbock_set_misc_wr((1 << 15) | (1 << 14), 0); pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops); + pxa2xx_configure_sockets(&sadev->dev); ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops, pxa2xx_drv_pcmcia_add_one); } -- cgit v1.2.3 From 644e6e4a7fa6b11d59f24032997d90ea0d858d03 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Feb 2011 15:46:05 +0000 Subject: cm4000_cs: Fix undefined ops warning Signed-off-by: Alan Cox Signed-off-by: Dominik Brodowski --- drivers/char/pcmcia/cm4000_cs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 777181a2e603..bcbbc71febb7 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -830,8 +830,7 @@ static void monitor_card(unsigned long p) test_bit(IS_ANY_T1, &dev->flags))) { DEBUGP(4, dev, "Perform AUTOPPS\n"); set_bit(IS_AUTOPPS_ACT, &dev->flags); - ptsreq.protocol = ptsreq.protocol = - (0x01 << dev->proto); + ptsreq.protocol = (0x01 << dev->proto); ptsreq.flags = 0x01; ptsreq.pts1 = 0x00; ptsreq.pts2 = 0x00; -- cgit v1.2.3 From 33619f0d3ff715a2a5499520967d526ad931d70d Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 19 Feb 2011 12:35:15 +0100 Subject: pcmcia: re-enable Zoomed Video support Allow drivers to enable Zoomed Video support. Currently, this is only used by out-of-tree drivers (L64020 DVB driver in particular). CC: [for 2.6.37] Signed-off-by: Dominik Brodowski --- drivers/pcmcia/pcmcia_resource.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 0bdda5b3ed55..42fbf1a75576 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -518,6 +518,8 @@ int pcmcia_enable_device(struct pcmcia_device *p_dev) flags |= CONF_ENABLE_IOCARD; if (flags & CONF_ENABLE_IOCARD) s->socket.flags |= SS_IOCARD; + if (flags & CONF_ENABLE_ZVCARD) + s->socket.flags |= SS_ZVCARD | SS_IOCARD; if (flags & CONF_ENABLE_SPKR) { s->socket.flags |= SS_SPKR_ENA; status = CCSR_AUDIO_ENA; -- cgit v1.2.3 From 68e41c5d032668e2905404afbef75bc58be179d6 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:06:06 -0800 Subject: xhci: Avoid BUG() in interrupt context Change the BUGs in xhci_find_new_dequeue_state() to WARN_ONs, to avoid bringing down the box if one of them is hit This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 3e8211c1ce5a..2a87231d588d 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -474,8 +474,11 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_deq_seg = find_trb_seg(cur_td->start_seg, dev->eps[ep_index].stopped_trb, &state->new_cycle_state); - if (!state->new_deq_seg) - BUG(); + if (!state->new_deq_seg) { + WARN_ON(1); + return; + } + /* Dig out the cycle state saved by the xHC during the stop ep cmd */ xhci_dbg(xhci, "Finding endpoint context\n"); ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); @@ -486,8 +489,10 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_deq_seg = find_trb_seg(state->new_deq_seg, state->new_deq_ptr, &state->new_cycle_state); - if (!state->new_deq_seg) - BUG(); + if (!state->new_deq_seg) { + WARN_ON(1); + return; + } trb = &state->new_deq_ptr->generic; if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) && -- cgit v1.2.3 From a2490187011cc2263117626615a581927d19f1d3 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:06:44 -0800 Subject: xhci: Clarify some expressions in the TRB math This makes it easier to spot some problems, which will be fixed by the next patch in the series. Also change dev_dbg to dev_err in check_trb_math(), so any math errors will be visible even when running with debug disabled. Note: This patch changes the expressions containing "((1 << TRB_MAX_BUFF_SHIFT) - 1)" to use the equivalent "(TRB_MAX_BUFF_SIZE - 1)". No change in behavior is intended for those expressions. This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 2a87231d588d..1071411d6dfc 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2368,7 +2368,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) /* Scatter gather list entries may cross 64KB boundaries */ running_total = TRB_MAX_BUFF_SIZE - - (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); if (running_total != 0) num_trbs++; @@ -2399,11 +2399,11 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) static void check_trb_math(struct urb *urb, int num_trbs, int running_total) { if (num_trbs != 0) - dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " + dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " "TRBs, %d left\n", __func__, urb->ep->desc.bEndpointAddress, num_trbs); if (running_total != urb->transfer_buffer_length) - dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " + dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " "queued %#x (%d), asked for %#x (%d)\n", __func__, urb->ep->desc.bEndpointAddress, @@ -2538,8 +2538,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, sg = urb->sg; addr = (u64) sg_dma_address(sg); this_sg_len = sg_dma_len(sg); - trb_buff_len = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); trb_buff_len = min_t(int, trb_buff_len, this_sg_len); if (trb_buff_len > urb->transfer_buffer_length) trb_buff_len = urb->transfer_buffer_length; @@ -2577,7 +2576,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), (unsigned int) addr + trb_buff_len); if (TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) { + (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) { xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n"); xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n", (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), @@ -2621,7 +2620,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } trb_buff_len = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (addr & (TRB_MAX_BUFF_SIZE - 1)); trb_buff_len = min_t(int, trb_buff_len, this_sg_len); if (running_total + trb_buff_len > urb->transfer_buffer_length) trb_buff_len = @@ -2661,7 +2660,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs = 0; /* How much data is (potentially) left before the 64KB boundary? */ running_total = TRB_MAX_BUFF_SIZE - - (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); /* If there's some data on this 64KB chunk, or we have to send a * zero-length transfer, we need at least one TRB @@ -2705,8 +2704,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* How much data is in the first TRB? */ addr = (u64) urb->transfer_dma; trb_buff_len = TRB_MAX_BUFF_SIZE - - (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); - if (urb->transfer_buffer_length < trb_buff_len) + (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); + if (trb_buff_len > urb->transfer_buffer_length) trb_buff_len = urb->transfer_buffer_length; first_trb = true; @@ -2884,8 +2883,7 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci, addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset); td_len = urb->iso_frame_desc[i].length; - running_total = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); if (running_total != 0) num_trbs++; -- cgit v1.2.3 From 5807795bd4dececdf553719cc02869e633395787 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:07:20 -0800 Subject: xhci: Fix errors in the running total calculations in the TRB math Calculations like running_total = TRB_MAX_BUFF_SIZE - (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); if (running_total != 0) num_trbs++; are incorrect, because running_total can never be zero, so the if() expression will never be true. I think the intention was that running_total be in the range of 0 to TRB_MAX_BUFF_SIZE-1, not 1 to TRB_MAX_BUFF_SIZE. So adding a running_total &= TRB_MAX_BUFF_SIZE - 1; fixes the problem. This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1071411d6dfc..dbbeec96ce1d 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2369,6 +2369,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) /* Scatter gather list entries may cross 64KB boundaries */ running_total = TRB_MAX_BUFF_SIZE - (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; if (running_total != 0) num_trbs++; @@ -2661,6 +2662,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* How much data is (potentially) left before the 64KB boundary? */ running_total = TRB_MAX_BUFF_SIZE - (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; /* If there's some data on this 64KB chunk, or we have to send a * zero-length transfer, we need at least one TRB @@ -2884,6 +2886,7 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci, td_len = urb->iso_frame_desc[i].length; running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; if (running_total != 0) num_trbs++; -- cgit v1.2.3 From bcd2fde05341cef0052e49566ec88b406a521cf3 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Sat, 12 Feb 2011 14:07:57 -0800 Subject: xhci: Fix an error in count_sg_trbs_needed() The expression while (running_total < sg_dma_len(sg)) does not take into account that the remaining data length can be less than sg_dma_len(sg). In that case, running_total can end up being greater than the total data length, so an extra TRB is counted. Changing the expression to while (running_total < sg_dma_len(sg) && running_total < temp) fixes that. This patch should be queued for stable kernels back to 2.6.31. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index dbbeec96ce1d..3289bf4832c9 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2374,7 +2374,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) num_trbs++; /* How many more 64KB chunks to transfer, how many more TRBs? */ - while (running_total < sg_dma_len(sg)) { + while (running_total < sg_dma_len(sg) && running_total < temp) { num_trbs++; running_total += TRB_MAX_BUFF_SIZE; } -- cgit v1.2.3 From 07194ab7be63a972096309ab0ea747df455c6a20 Mon Sep 17 00:00:00 2001 From: Luben Tuikov Date: Fri, 11 Feb 2011 11:33:10 -0800 Subject: USB: Reset USB 3.0 devices on (re)discovery If the device isn't reset, the XHCI HCD sends SET ADDRESS to address 0 while the device is already in Addressed state, and the request is dropped on the floor as it is addressed to the default address. This sequence of events, which this patch fixes looks like this: usb_reset_and_verify_device() hub_port_init() hub_set_address() SET_ADDRESS to 0 with 1 usb_get_device_descriptor(udev, 8) usb_get_device_descriptor(udev, 18) descriptors_changed() --> goto re_enumerate: hub_port_logical_disconnect() kick_khubd() And then: hub_events() hub_port_connect_change() usb_disconnect() usb_disable_device() new device struct sets device state to Powered choose_address() hub_port_init() <-- no reset, but SET ADDRESS to 0 with 1, timeout! The solution is to always reset the device in hub_port_init() to put it in a known state. Note from Sarah Sharp: This patch should be queued for stable trees all the way back to 2.6.34, since that was the first kernel that supported configured device reset. The code this patch touches has been there since 2.6.32, but the bug would never be hit before 2.6.34 because the xHCI driver would completely reject an attempt to reset a configured device under xHCI. Signed-off-by: Luben Tuikov Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/core/hub.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d041c6826e43..0f299b7aad60 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2681,17 +2681,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - if (!udev->config && oldspeed == USB_SPEED_SUPER) { - /* Don't reset USB 3.0 devices during an initial setup */ - usb_set_device_state(udev, USB_STATE_DEFAULT); - } else { - /* Reset the device; full speed may morph to high speed */ - /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ - retval = hub_port_reset(hub, port1, udev, delay); - if (retval < 0) /* error or disconnect */ - goto fail; - /* success, speed is known */ - } + /* Reset the device; full speed may morph to high speed */ + /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ + retval = hub_port_reset(hub, port1, udev, delay); + if (retval < 0) /* error or disconnect */ + goto fail; + /* success, speed is known */ + retval = -ENODEV; if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) { -- cgit v1.2.3 From 09ece30e06b19994e6f3d260e5c4be18dce22714 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 8 Feb 2011 16:29:33 -0800 Subject: USB: xhci: rework xhci_print_ir_set() to get ir set from xhci itself xhci->ir_set points to __iomem region, but xhci_print_ir_set accepts plain struct xhci_intr_reg * causing multiple sparse warning at call sites and inside the fucntion when we try to read that memory. Instead of adding __iomem qualifier to the argument let's rework the function so it itself gets needed register set from xhci and prints it. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-dbg.c | 5 +++-- drivers/usb/host/xhci-mem.c | 2 +- drivers/usb/host/xhci.c | 6 +++--- drivers/usb/host/xhci.h | 2 +- 4 files changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index fcbf4abbf381..582937e2132f 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -169,9 +169,10 @@ static void xhci_print_ports(struct xhci_hcd *xhci) } } -void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num) +void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num) { - void *addr; + struct xhci_intr_reg __iomem *ir_set = &xhci->run_regs->ir_set[set_num]; + void __iomem *addr; u32 temp; u64 temp_64; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 1d0f45f0e7a6..c10ee8b6008e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1961,7 +1961,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) /* Set the event ring dequeue address */ xhci_set_hc_event_deq(xhci); xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n"); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); /* * XXX: Might need to set the Interrupter Moderation Register to diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 34cf4e165877..9784880df584 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -473,7 +473,7 @@ int xhci_run(struct usb_hcd *hcd) xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp)); xhci_writel(xhci, ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); if (NUM_TEST_NOOPS > 0) doorbell = xhci_setup_one_noop(xhci); @@ -528,7 +528,7 @@ void xhci_stop(struct usb_hcd *hcd) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_writel(xhci, ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); @@ -755,7 +755,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_writel(xhci, ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7f236fd22015..7f127df6dd55 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1348,7 +1348,7 @@ static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci) } /* xHCI debugging */ -void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num); +void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num); void xhci_print_registers(struct xhci_hcd *xhci); void xhci_dbg_regs(struct xhci_hcd *xhci); void xhci_print_run_regs(struct xhci_hcd *xhci); -- cgit v1.2.3 From c50a00f8feba42c5bccff47e052e4cb0c95dcd2b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 8 Feb 2011 16:29:34 -0800 Subject: USB: xhci: fix couple sparse annotations There is no point in casting to (void *) when setting up xhci->ir_set as it only makes us lose __iomem annotation and makes sparse unhappy. OTOH we do need to cast to (void *) when calculating xhci->dba from offset, but since it is IO memory we need to annotate it as such. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-mem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index c10ee8b6008e..dbb8bcd3919e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1900,11 +1900,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) val &= DBOFF_MASK; xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x" " from cap regs base addr\n", val); - xhci->dba = (void *) xhci->cap_regs + val; + xhci->dba = (void __iomem *) xhci->cap_regs + val; xhci_dbg_regs(xhci); xhci_print_run_regs(xhci); /* Set ir_set to interrupt register set 0 */ - xhci->ir_set = (void *) xhci->run_regs->ir_set; + xhci->ir_set = &xhci->run_regs->ir_set[0]; /* * Event ring setup: Allocate a normal ring, but also setup -- cgit v1.2.3 From da9cf5050a2e3dbc3cf26a8d908482eb4485ed49 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 21 Feb 2011 18:25:57 +1100 Subject: md: avoid spinlock problem in blk_throtl_exit blk_throtl_exit assumes that ->queue_lock still exists, so make sure that it does. To do this, we stop redirecting ->queue_lock to conf->device_lock and leave it pointing where it is initialised - __queue_lock. As the blk_plug functions check the ->queue_lock is held, we now take that spin_lock explicitly around the plug functions. We don't need the locking, just the warning removal. This is needed for any kernel with the blk_throtl code, which is which is 2.6.37 and later. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/linear.c | 1 - drivers/md/multipath.c | 1 - drivers/md/raid0.c | 1 - drivers/md/raid1.c | 6 ++++-- drivers/md/raid10.c | 7 ++++--- drivers/md/raid5.c | 1 - 6 files changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 8a2f767f26d8..0ed7f6bc2a7f 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -216,7 +216,6 @@ static int linear_run (mddev_t *mddev) if (md_check_no_bitmap(mddev)) return -EINVAL; - mddev->queue->queue_lock = &mddev->queue->__queue_lock; conf = linear_conf(mddev, mddev->raid_disks); if (!conf) diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 6d7ddf32ef2e..3a62d440e27b 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -435,7 +435,6 @@ static int multipath_run (mddev_t *mddev) * bookkeeping area. [whatever we allocate in multipath_run(), * should be freed in multipath_stop()] */ - mddev->queue->queue_lock = &mddev->queue->__queue_lock; conf = kzalloc(sizeof(multipath_conf_t), GFP_KERNEL); mddev->private = conf; diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 75671dfee551..c0ac457f1218 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -361,7 +361,6 @@ static int raid0_run(mddev_t *mddev) if (md_check_no_bitmap(mddev)) return -EINVAL; blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors); - mddev->queue->queue_lock = &mddev->queue->__queue_lock; /* if private is not null, we are here after takeover */ if (mddev->private == NULL) { diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a23ffa397ba9..06cd712807d0 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -593,7 +593,10 @@ static int flush_pending_writes(conf_t *conf) if (conf->pending_bio_list.head) { struct bio *bio; bio = bio_list_get(&conf->pending_bio_list); + /* Only take the spinlock to quiet a warning */ + spin_lock(conf->mddev->queue->queue_lock); blk_remove_plug(conf->mddev->queue); + spin_unlock(conf->mddev->queue->queue_lock); spin_unlock_irq(&conf->device_lock); /* flush any pending bitmap writes to * disk before proceeding w/ I/O */ @@ -959,7 +962,7 @@ static int make_request(mddev_t *mddev, struct bio * bio) atomic_inc(&r1_bio->remaining); spin_lock_irqsave(&conf->device_lock, flags); bio_list_add(&conf->pending_bio_list, mbio); - blk_plug_device(mddev->queue); + blk_plug_device_unlocked(mddev->queue); spin_unlock_irqrestore(&conf->device_lock, flags); } r1_bio_write_done(r1_bio, bio->bi_vcnt, behind_pages, behind_pages != NULL); @@ -2021,7 +2024,6 @@ static int run(mddev_t *mddev) if (IS_ERR(conf)) return PTR_ERR(conf); - mddev->queue->queue_lock = &conf->device_lock; list_for_each_entry(rdev, &mddev->disks, same_set) { disk_stack_limits(mddev->gendisk, rdev->bdev, rdev->data_offset << 9); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 3b607b28741b..747d061d8e05 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -662,7 +662,10 @@ static int flush_pending_writes(conf_t *conf) if (conf->pending_bio_list.head) { struct bio *bio; bio = bio_list_get(&conf->pending_bio_list); + /* Spinlock only taken to quiet a warning */ + spin_lock(conf->mddev->queue->queue_lock); blk_remove_plug(conf->mddev->queue); + spin_unlock(conf->mddev->queue->queue_lock); spin_unlock_irq(&conf->device_lock); /* flush any pending bitmap writes to disk * before proceeding w/ I/O */ @@ -971,7 +974,7 @@ static int make_request(mddev_t *mddev, struct bio * bio) atomic_inc(&r10_bio->remaining); spin_lock_irqsave(&conf->device_lock, flags); bio_list_add(&conf->pending_bio_list, mbio); - blk_plug_device(mddev->queue); + blk_plug_device_unlocked(mddev->queue); spin_unlock_irqrestore(&conf->device_lock, flags); } @@ -2304,8 +2307,6 @@ static int run(mddev_t *mddev) if (!conf) goto out; - mddev->queue->queue_lock = &conf->device_lock; - mddev->thread = conf->thread; conf->thread = NULL; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 702812824195..78536fdbd87f 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5204,7 +5204,6 @@ static int run(mddev_t *mddev) mddev->queue->backing_dev_info.congested_data = mddev; mddev->queue->backing_dev_info.congested_fn = raid5_congested; - mddev->queue->queue_lock = &conf->device_lock; mddev->queue->unplug_fn = raid5_unplug_queue; chunk_size = mddev->chunk_sectors << 9; -- cgit v1.2.3 From 573cfde7aaeaadb0fd356ff2a14bdf9238967661 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Fri, 4 Feb 2011 01:41:02 +0200 Subject: ath5k: Fix fast channel switching Fast channel change fixes: a) Always set OFDM timings b) Don't re-activate PHY c) Enable only NF calibration, not AGC https://bugzilla.kernel.org/show_bug.cgi?id=27382 Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/phy.c | 142 +++++++++++++++++++++-------------- 1 file changed, 87 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index c44111fc98b7..62ce2f4e8605 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -282,6 +282,34 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah) return 0; } +/* + * Wait for synth to settle + */ +static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* + * On 5211+ read activation -> rx delay + * and use it (100ns steps). + */ + if (ah->ah_version != AR5K_AR5210) { + u32 delay; + delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + delay = (channel->hw_value & CHANNEL_CCK) ? + ((delay << 2) / 22) : (delay / 10); + if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) + delay = delay << 1; + if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) + delay = delay << 2; + /* XXX: /2 on turbo ? Let's be safe + * for now */ + udelay(100 + delay); + } else { + mdelay(1); + } +} + /**********************\ * RF Gain optimization * @@ -3238,6 +3266,13 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, /* Failed */ if (i >= 100) return -EIO; + + /* Set channel and wait for synth */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + ath5k_hw_wait_for_synth(ah, channel); } /* @@ -3252,13 +3287,53 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (ret) return ret; + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value & CHANNEL_OFDM) { + + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + + /* Spur info is available only from EEPROM versions + * greater than 5.3, but the EEPROM routines will use + * static values for older versions */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424) + ath5k_hw_set_spur_mitigation_filter(ah, + channel); + } + + /* If we used fast channel switching + * we are done, release RF bus and + * fire up NF calibration. + * + * Note: Only NF calibration due to + * channel change, not AGC calibration + * since AGC is still running ! + */ + if (fast) { + /* + * Release RF Bus grant + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, + AR5K_PHY_RFBUS_REQ_REQUEST); + + /* + * Start NF calibration + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF); + + return ret; + } + /* * For 5210 we do all initialization using * initvals, so we don't have to modify * any settings (5210 also only supports * a/aturbo modes) */ - if ((ah->ah_version != AR5K_AR5210) && !fast) { + if (ah->ah_version != AR5K_AR5210) { /* * Write initial RF gain settings @@ -3277,22 +3352,6 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (ret) return ret; - /* Write OFDM timings on 5212*/ - if (ah->ah_version == AR5K_AR5212 && - channel->hw_value & CHANNEL_OFDM) { - - ret = ath5k_hw_write_ofdm_timings(ah, channel); - if (ret) - return ret; - - /* Spur info is available only from EEPROM versions - * greater than 5.3, but the EEPROM routines will use - * static values for older versions */ - if (ah->ah_mac_srev >= AR5K_SREV_AR5424) - ath5k_hw_set_spur_mitigation_filter(ah, - channel); - } - /*Enable/disable 802.11b mode on 5111 (enable 2111 frequency converter + CCK)*/ if (ah->ah_radio == AR5K_RF5111) { @@ -3323,47 +3382,20 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, */ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + ath5k_hw_wait_for_synth(ah, channel); + /* - * On 5211+ read activation -> rx delay - * and use it. + * Perform ADC test to see if baseband is ready + * Set tx hold and check adc test register */ - if (ah->ah_version != AR5K_AR5210) { - u32 delay; - delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & - AR5K_PHY_RX_DELAY_M; - delay = (channel->hw_value & CHANNEL_CCK) ? - ((delay << 2) / 22) : (delay / 10); - if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) - delay = delay << 1; - if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) - delay = delay << 2; - /* XXX: /2 on turbo ? Let's be safe - * for now */ - udelay(100 + delay); - } else { - mdelay(1); - } - - if (fast) - /* - * Release RF Bus grant - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, - AR5K_PHY_RFBUS_REQ_REQUEST); - else { - /* - * Perform ADC test to see if baseband is ready - * Set tx hold and check adc test register - */ - phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); - ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); - for (i = 0; i <= 20; i++) { - if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) - break; - udelay(200); - } - ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); + phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); } + ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); /* * Start automatic gain control calibration -- cgit v1.2.3 From a866a2cc1c558089dd4c627eeb300142b1354474 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sun, 30 Jan 2011 13:22:41 +0100 Subject: rt2x00: Fix WPA TKIP Michael MIC failures. As reported and found by Johannes Stezenbach: rt2800{pci,usb} do not report the Michael MIC in RXed frames, but do check the Michael MIC in hardware. Therefore we have to report to mac80211 that the received frame does not include the Michael MIC. https://bugzilla.kernel.org/show_bug.cgi?id=16608 Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800pci.c | 6 ++++++ drivers/net/wireless/rt2x00/rt2800usb.c | 6 ++++++ 2 files changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 7951cdaa9c01..3b3f1e45ab3e 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -652,6 +652,12 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; + /* + * The hardware has already checked the Michael Mic and has + * stripped it from the frame. Signal this to mac80211. + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) rxdesc->flags |= RX_FLAG_DECRYPTED; else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index b97a4a54ff4c..197a36c05fda 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -486,6 +486,12 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; + /* + * The hardware has already checked the Michael Mic and has + * stripped it from the frame. Signal this to mac80211. + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) rxdesc->flags |= RX_FLAG_DECRYPTED; else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) -- cgit v1.2.3 From 0bf719dfdecc5552155cbec78e49fa06e531e35c Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 11 Feb 2011 01:48:42 +0100 Subject: p54pci: update receive dma buffers before and after processing Documentation/DMA-API-HOWTO.txt states: "DMA transfers need to be synced properly in order for the cpu and device to see the most uptodate and correct copy of the DMA buffer." Cc: Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54pci.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 1eacba4daa5b..0494d7b102d4 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -199,6 +199,7 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index, while (i != idx) { u16 len; struct sk_buff *skb; + dma_addr_t dma_addr; desc = &ring[i]; len = le16_to_cpu(desc->len); skb = rx_buf[i]; @@ -216,17 +217,20 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index, len = priv->common.rx_mtu; } + dma_addr = le32_to_cpu(desc->host_addr); + pci_dma_sync_single_for_cpu(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); skb_put(skb, len); if (p54_rx(dev, skb)) { - pci_unmap_single(priv->pdev, - le32_to_cpu(desc->host_addr), - priv->common.rx_mtu + 32, - PCI_DMA_FROMDEVICE); + pci_unmap_single(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); rx_buf[i] = NULL; - desc->host_addr = 0; + desc->host_addr = cpu_to_le32(0); } else { skb_trim(skb, 0); + pci_dma_sync_single_for_device(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); desc->len = cpu_to_le16(priv->common.rx_mtu + 32); } -- cgit v1.2.3 From 86b27d8050b6b2aec31063fa9f40b16fb347afb3 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 11 Feb 2011 20:47:45 +0000 Subject: drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch If the gpu is hung, then whatever was inside the render cache is lost and there is little point waiting for it. Or complaining if we see an EIO or EAGAIN instead. So, if the GPU is indeed in its death throes when we need to rewrite the registers for a new framebuffer, just ignore the error and proceed with the update. Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3b006536b3d2..dcb821737f38 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1630,19 +1630,19 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; wait_event(dev_priv->pending_flip_queue, + atomic_read(&dev_priv->mm.wedged) || atomic_read(&obj->pending_flip) == 0); /* Big Hammer, we also need to ensure that any pending * MI_WAIT_FOR_EVENT inside a user batch buffer on the * current scanout is retired before unpinning the old * framebuffer. + * + * This should only fail upon a hung GPU, in which case we + * can safely continue. */ ret = i915_gem_object_flush_gpu(obj, false); - if (ret) { - i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj); - mutex_unlock(&dev->struct_mutex); - return ret; - } + (void) ret; } ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y, -- cgit v1.2.3 From a36dbec57e9a665d69cd2e1a673153ddb2d62785 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 11 Feb 2011 14:44:51 -0800 Subject: drm/i915: don't enable FDI & transcoder interrupts after all We can enable some safely, but FDI and transcoder interrupts can occur and block other interrupts from being detected (like port hotplug events). So keep them disabled by default (they can be re-enabled for debugging display bringup, but should generally be off). Signed-off-by: Jesse Barnes Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_irq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 97f946dcc1aa..8a9e08bf1cf7 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -316,6 +316,8 @@ static void i915_hotplug_work_func(struct work_struct *work) struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; + DRM_DEBUG_KMS("running encoder hotplug functions\n"); + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) if (encoder->hot_plug) encoder->hot_plug(encoder); @@ -1649,9 +1651,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev) } else { hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; - hotplug_mask |= SDE_AUX_MASK | SDE_FDI_MASK | SDE_TRANS_MASK; - I915_WRITE(FDI_RXA_IMR, 0); - I915_WRITE(FDI_RXB_IMR, 0); + hotplug_mask |= SDE_AUX_MASK; } dev_priv->pch_irq_mask = ~hotplug_mask; -- cgit v1.2.3 From bdb8b975fc66e081c3f39be6267701f8226d11aa Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 22 Dec 2010 11:37:09 +0000 Subject: agp/intel: Experiment with a 855GM GWB bit Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27187 Tested-by: Thorsten Vollmer (DFI-ACP G5M150-N w/852GME) Tested-by: Moritz Brunner <2points@gmx.org> (Asus M2400N/i855GM) Tested-by: Indan Zupancic (Thinkpad X40/855GM rev 02) Tested-by: Eric Anholt (865G) Signed-off-by: Chris Wilson --- drivers/char/agp/intel-agp.h | 1 + drivers/char/agp/intel-gtt.c | 56 +++++++++++++++++--------------------------- 2 files changed, 22 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index c195bfeade11..5feebe2800e9 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -130,6 +130,7 @@ #define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4) #define I915_IFPADDR 0x60 +#define I830_HIC 0x70 /* Intel 965G registers */ #define I965_MSAC 0x62 diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index fab3d3265adb..0d09b537bb9a 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include "agp.h" #include "intel-agp.h" @@ -70,12 +71,8 @@ static struct _intel_private { u32 __iomem *gtt; /* I915G */ bool clear_fake_agp; /* on first access via agp, fill with scratch */ int num_dcache_entries; - union { - void __iomem *i9xx_flush_page; - void *i8xx_flush_page; - }; + void __iomem *i9xx_flush_page; char *i81x_gtt_table; - struct page *i8xx_page; struct resource ifp_resource; int resource_valid; struct page *scratch_page; @@ -722,28 +719,6 @@ static int intel_fake_agp_fetch_size(void) static void i830_cleanup(void) { - if (intel_private.i8xx_flush_page) { - kunmap(intel_private.i8xx_flush_page); - intel_private.i8xx_flush_page = NULL; - } - - __free_page(intel_private.i8xx_page); - intel_private.i8xx_page = NULL; -} - -static void intel_i830_setup_flush(void) -{ - /* return if we've already set the flush mechanism up */ - if (intel_private.i8xx_page) - return; - - intel_private.i8xx_page = alloc_page(GFP_KERNEL); - if (!intel_private.i8xx_page) - return; - - intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page); - if (!intel_private.i8xx_flush_page) - i830_cleanup(); } /* The chipset_flush interface needs to get data that has already been @@ -758,14 +733,27 @@ static void intel_i830_setup_flush(void) */ static void i830_chipset_flush(void) { - unsigned int *pg = intel_private.i8xx_flush_page; + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + /* Forcibly evict everything from the CPU write buffers. + * clflush appears to be insufficient. + */ + wbinvd_on_all_cpus(); + + /* Now we've only seen documents for this magic bit on 855GM, + * we hope it exists for the other gen2 chipsets... + * + * Also works as advertised on my 845G. + */ + writel(readl(intel_private.registers+I830_HIC) | (1<<31), + intel_private.registers+I830_HIC); - memset(pg, 0, 1024); + while (readl(intel_private.registers+I830_HIC) & (1<<31)) { + if (time_after(jiffies, timeout)) + break; - if (cpu_has_clflush) - clflush_cache_range(pg, 1024); - else if (wbinvd_on_all_cpus() != 0) - printk(KERN_ERR "Timed out waiting for cache flush.\n"); + udelay(50); + } } static void i830_write_entry(dma_addr_t addr, unsigned int entry, @@ -849,8 +837,6 @@ static int i830_setup(void) intel_private.gtt_bus_addr = reg_addr + I810_PTE_BASE; - intel_i830_setup_flush(); - return 0; } -- cgit v1.2.3 From 011b9910bdaf2e52c48c012490ab444fceea1959 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 15 Feb 2011 15:08:02 -0800 Subject: drm/i915: skip FDI & PCH enabling for DP_A eDP on the CPU doesn't need the PCH set up at all, it can in fact cause problems. So avoid FDI training and PCH PLL enabling in that case. Signed-off-by: Jesse Barnes Tested-by: Andy Whitcroft Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 83 +++++++++++++++++++++++++++++++++++- 1 file changed, 81 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index dcb821737f38..9ca1bb2554fc 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2045,6 +2045,31 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) atomic_read(&obj->pending_flip) == 0); } +static bool intel_crtc_driving_pch(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct intel_encoder *encoder; + + /* + * If there's a non-PCH eDP on this crtc, it must be DP_A, and that + * must be driven by its own crtc; no sharing is possible. + */ + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { + if (encoder->base.crtc != crtc) + continue; + + switch (encoder->type) { + case INTEL_OUTPUT_EDP: + if (!intel_encoder_is_pch_edp(&encoder->base)) + return false; + continue; + } + } + + return true; +} + static void ironlake_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -2053,6 +2078,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 reg, temp; + bool is_pch_port = false; if (intel_crtc->active) return; @@ -2066,7 +2092,56 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); } - ironlake_fdi_enable(crtc); + is_pch_port = intel_crtc_driving_pch(crtc); + + if (is_pch_port) + ironlake_fdi_enable(crtc); + else { + /* disable CPU FDI tx and PCH FDI rx */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_TX_ENABLE); + POSTING_READ(reg); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(0x7 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp & ~FDI_RX_ENABLE); + + POSTING_READ(reg); + udelay(100); + + /* Ironlake workaround, disable clock pointer after downing FDI */ + if (HAS_PCH_IBX(dev)) + I915_WRITE(FDI_RX_CHICKEN(pipe), + I915_READ(FDI_RX_CHICKEN(pipe) & + ~FDI_RX_PHASE_SYNC_POINTER_ENABLE)); + + /* still set train pattern 1 */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + I915_WRITE(reg, temp); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + if (HAS_PCH_CPT(dev)) { + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; + } else { + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + } + /* BPC in FDI rx is consistent with that in PIPECONF */ + temp &= ~(0x07 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp); + + POSTING_READ(reg); + udelay(100); + } /* Enable panel fitting for LVDS */ if (dev_priv->pch_pf_size && @@ -2100,6 +2175,10 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) intel_flush_display_plane(dev, plane); } + /* Skip the PCH stuff if possible */ + if (!is_pch_port) + goto done; + /* For PCH output, training FDI link */ if (IS_GEN6(dev)) gen6_fdi_link_train(crtc); @@ -2184,7 +2263,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(reg, temp | TRANS_ENABLE); if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) DRM_ERROR("failed to enable transcoder %d\n", pipe); - +done: intel_crtc_load_lut(crtc); intel_update_fbc(dev); intel_crtc_update_cursor(crtc, true); -- cgit v1.2.3 From 28801f351f76231e8d1e378274d6d56a577b897e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 16 Feb 2011 03:48:38 +0000 Subject: sfc: lower stack usage in efx_ethtool_self_test MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/net/sfc/ethtool.c: In function ‘efx_ethtool_self_test’: drivers/net/sfc/ethtool.c:613: warning: the frame size of 1200 bytes is larger than 1024 bytes Signed-off-by: Eric Dumazet Acked-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/ethtool.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index 0e8bb19ed60d..ca886d98bdc7 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -569,9 +569,14 @@ static void efx_ethtool_self_test(struct net_device *net_dev, struct ethtool_test *test, u64 *data) { struct efx_nic *efx = netdev_priv(net_dev); - struct efx_self_tests efx_tests; + struct efx_self_tests *efx_tests; int already_up; - int rc; + int rc = -ENOMEM; + + efx_tests = kzalloc(sizeof(*efx_tests), GFP_KERNEL); + if (!efx_tests) + goto fail; + ASSERT_RTNL(); if (efx->state != STATE_RUNNING) { @@ -589,13 +594,11 @@ static void efx_ethtool_self_test(struct net_device *net_dev, if (rc) { netif_err(efx, drv, efx->net_dev, "failed opening device.\n"); - goto fail2; + goto fail1; } } - memset(&efx_tests, 0, sizeof(efx_tests)); - - rc = efx_selftest(efx, &efx_tests, test->flags); + rc = efx_selftest(efx, efx_tests, test->flags); if (!already_up) dev_close(efx->net_dev); @@ -604,10 +607,11 @@ static void efx_ethtool_self_test(struct net_device *net_dev, rc == 0 ? "passed" : "failed", (test->flags & ETH_TEST_FL_OFFLINE) ? "off" : "on"); - fail2: - fail1: +fail1: /* Fill ethtool results structures */ - efx_ethtool_fill_self_tests(efx, &efx_tests, NULL, data); + efx_ethtool_fill_self_tests(efx, efx_tests, NULL, data); + kfree(efx_tests); +fail: if (rc) test->flags |= ETH_TEST_FL_FAILED; } -- cgit v1.2.3 From f10820e49585f281706ac07570a9e1652bdb5dd9 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 31 Jan 2011 15:09:23 +0100 Subject: i2c-stu300: make sure adapter-name is terminated Use strlcpy instead of strncpy. Signed-off-by: Wolfram Sang Cc: Linus Walleij Cc: Ben Dooks Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-stu300.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 495be451d326..266135ddf7fa 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -942,7 +942,7 @@ stu300_probe(struct platform_device *pdev) adap->owner = THIS_MODULE; /* DDC class but actually often used for more generic I2C */ adap->class = I2C_CLASS_DDC; - strncpy(adap->name, "ST Microelectronics DDC I2C adapter", + strlcpy(adap->name, "ST Microelectronics DDC I2C adapter", sizeof(adap->name)); adap->nr = bus_nr; adap->algo = &stu300_algo; -- cgit v1.2.3 From adf6e07922255937c8bfeea777d19502b4c9a2be Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 27 Jan 2011 16:18:41 -0800 Subject: i2c-omap: fix static suspend vs. runtime suspend When runtime PM is enabled, each OMAP i2c device is suspended after each i2c xfer. However, there are two cases when the static suspend methods must be used to ensure the devices are suspended: 1) runtime PM is disabled, either at compile time or dynamically via /sys/devices/.../power/control. 2) an i2c client driver uses i2c during it's suspend callback, thus leaving the i2c driver active (NOTE: runtime suspend transitions are disabled during system suspend, so i2c activity during system suspend will runtime resume the device, but not runtime (re)suspend it.) Since the actual work to suspend the device is handled by the subsytem, call the bus methods to take care of it. NOTE: This takes care of a known suspend problem on OMAP3 where the TWL RTC driver does i2c xfers during its suspend path leaving the i2c driver in an active state (since runtime suspend transistions are disabled.) Signed-off-by: Kevin Hilman Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index b605ff3a1fa0..0541df90b9fb 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1137,12 +1137,40 @@ omap_i2c_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_SUSPEND +static int omap_i2c_suspend(struct device *dev) +{ + if (!pm_runtime_suspended(dev)) + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend) + dev->bus->pm->runtime_suspend(dev); + + return 0; +} + +static int omap_i2c_resume(struct device *dev) +{ + if (!pm_runtime_suspended(dev)) + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume) + dev->bus->pm->runtime_resume(dev); + + return 0; +} + +static struct dev_pm_ops omap_i2c_pm_ops = { + .suspend = omap_i2c_suspend, + .resume = omap_i2c_resume, +}; +#else +#define omap_i2c_pm_ops NULL +#endif + static struct platform_driver omap_i2c_driver = { .probe = omap_i2c_probe, .remove = omap_i2c_remove, .driver = { .name = "omap_i2c", .owner = THIS_MODULE, + .pm = &omap_i2c_pm_ops, }, }; -- cgit v1.2.3 From bd6a60afeb4c9ada3ff27f1d13db1a2b5c11d8c0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 21 Feb 2011 01:11:59 -0500 Subject: Revert "drm/radeon/kms: switch back to min->max pll post divider iteration" This reverts commit a6f9761743bf35b052180f4a8bdae4d2cc0465f6. Remove this commit as it is no longer necessary. The relevant bugs were fixed properly in: drm/radeon/kms: hopefully fix pll issues for real (v3) 5b40ddf888398ce4cccbf3b9d0a18d90149ed7ff drm/radeon/kms: add missing frac fb div flag for dce4+ 9f4283f49f0a96a64c5a45fe56f0f8c942885eef This commit also broke certain ~5 Mhz modes on old arcade monitors, so reverting this commit fixes: https://bugzilla.kernel.org/show_bug.cgi?id=29502 Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 0e657095de7c..3e7e7f9eb781 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -971,7 +971,7 @@ void radeon_compute_pll_legacy(struct radeon_pll *pll, max_fractional_feed_div = pll->max_frac_feedback_div; } - for (post_div = min_post_div; post_div <= max_post_div; ++post_div) { + for (post_div = max_post_div; post_div >= min_post_div; --post_div) { uint32_t ref_div; if ((pll->flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1)) -- cgit v1.2.3 From e40b6fc8373314666e7853733dc0ca4049a68b95 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 18 Feb 2011 15:51:57 +1000 Subject: drm/radeon/kms: align height of fb allocation. this aligns the height of the fb allocation so it doesn't trip over the size checks later when we use this from userspace to copy the buffer at X start. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_fb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index 66324b5bb5ba..cc44bdfec80f 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -113,11 +113,14 @@ static int radeonfb_create_pinned_object(struct radeon_fbdev *rfbdev, u32 tiling_flags = 0; int ret; int aligned_size, size; + int height = mode_cmd->height; /* need to align pitch with crtc limits */ mode_cmd->pitch = radeon_align_pitch(rdev, mode_cmd->width, mode_cmd->bpp, fb_tiled) * ((mode_cmd->bpp + 1) / 8); - size = mode_cmd->pitch * mode_cmd->height; + if (rdev->family >= CHIP_R600) + height = ALIGN(mode_cmd->height, 8); + size = mode_cmd->pitch * height; aligned_size = ALIGN(size, PAGE_SIZE); ret = radeon_gem_object_create(rdev, aligned_size, 0, RADEON_GEM_DOMAIN_VRAM, -- cgit v1.2.3 From c4cc383915549cf14f027f374904e30c13653dac Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Mon, 21 Feb 2011 05:42:00 +0100 Subject: drm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns) Use of abs() wrongly wrapped diff_ns to 32 bit, which gives a 1/4000 probability of a missed vblank increment at each vblank irq reenable if the kms driver doesn't support high precision vblank timestamping. Not a big deal in practice, but let's make it nice. Signed-off-by: Mario Kleiner Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 3dadfa2a8528..6d2d4faf8678 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -164,7 +164,7 @@ static void vblank_disable_and_save(struct drm_device *dev, int crtc) * available. In that case we can't account for this and just * hope for the best. */ - if ((vblrc > 0) && (abs(diff_ns) > 1000000)) + if ((vblrc > 0) && (abs64(diff_ns) > 1000000)) atomic_inc(&dev->_vblank_count[crtc]); /* Invalidate all timestamps while vblank irq's are off. */ @@ -1293,7 +1293,7 @@ bool drm_handle_vblank(struct drm_device *dev, int crtc) * e.g., due to spurious vblank interrupts. We need to * ignore those for accounting. */ - if (abs(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) { + if (abs64(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) { /* Store new timestamp in ringbuffer. */ vblanktimestamp(dev, crtc, vblcount + 1) = tvblank; smp_wmb(); -- cgit v1.2.3 From bc21512835a72bc1eab7abd7d8a1bff0435591d7 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Mon, 21 Feb 2011 05:42:01 +0100 Subject: drm/vblank: Use memory barriers optimized for atomic_t instead of generics. Documentation/atomic_ops.txt tells us that there are memory barriers optimized for atomic_inc and other atomic_t ops. Use these instead of smp_wmb(), and also to make the required memory barriers around vblank counter increments more explicit. Signed-off-by: Mario Kleiner Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 6d2d4faf8678..22f3bf5ecbd2 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -164,8 +164,10 @@ static void vblank_disable_and_save(struct drm_device *dev, int crtc) * available. In that case we can't account for this and just * hope for the best. */ - if ((vblrc > 0) && (abs64(diff_ns) > 1000000)) + if ((vblrc > 0) && (abs64(diff_ns) > 1000000)) { atomic_inc(&dev->_vblank_count[crtc]); + smp_mb__after_atomic_inc(); + } /* Invalidate all timestamps while vblank irq's are off. */ clear_vblank_timestamps(dev, crtc); @@ -858,10 +860,11 @@ static void drm_update_vblank_count(struct drm_device *dev, int crtc) if (rc) { tslot = atomic_read(&dev->_vblank_count[crtc]) + diff; vblanktimestamp(dev, crtc, tslot) = t_vblank; - smp_wmb(); } + smp_mb__before_atomic_inc(); atomic_add(diff, &dev->_vblank_count[crtc]); + smp_mb__after_atomic_inc(); } /** @@ -1296,12 +1299,13 @@ bool drm_handle_vblank(struct drm_device *dev, int crtc) if (abs64(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) { /* Store new timestamp in ringbuffer. */ vblanktimestamp(dev, crtc, vblcount + 1) = tvblank; - smp_wmb(); /* Increment cooked vblank count. This also atomically commits * the timestamp computed above. */ + smp_mb__before_atomic_inc(); atomic_inc(&dev->_vblank_count[crtc]); + smp_mb__after_atomic_inc(); } else { DRM_DEBUG("crtc %d: Redundant vblirq ignored. diff_ns = %d\n", crtc, (int) diff_ns); -- cgit v1.2.3 From 9be6f8a978bdcbab46474a125aa4212516b71fe7 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Mon, 21 Feb 2011 05:42:02 +0100 Subject: drm/vblank: Enable precise vblank timestamps for interlaced and doublescan modes. Testing showed the current code can already handle doublescan video modes just fine. A trivial tweak makes it work for interlaced scanout as well. Tested and shown to be precise on Radeon rv530, r600 and Intel 945-GME. Signed-off-by: Mario Kleiner Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 22f3bf5ecbd2..53120a72a48c 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -493,6 +493,12 @@ void drm_calc_timestamping_constants(struct drm_crtc *crtc) /* Dot clock in Hz: */ dotclock = (u64) crtc->hwmode.clock * 1000; + /* Fields of interlaced scanout modes are only halve a frame duration. + * Double the dotclock to get halve the frame-/line-/pixelduration. + */ + if (crtc->hwmode.flags & DRM_MODE_FLAG_INTERLACE) + dotclock *= 2; + /* Valid dotclock? */ if (dotclock > 0) { /* Convert scanline length in pixels and video dot clock to @@ -605,14 +611,6 @@ int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, int crtc, return -EAGAIN; } - /* Don't know yet how to handle interlaced or - * double scan modes. Just no-op for now. - */ - if (mode->flags & (DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLSCAN)) { - DRM_DEBUG("crtc %d: Noop due to unsupported mode.\n", crtc); - return -ENOTSUPP; - } - /* Get current scanout position with system timestamp. * Repeat query up to DRM_TIMESTAMP_MAXRETRIES times * if single query takes longer than max_error nanoseconds. -- cgit v1.2.3 From 40f2a2fabbeffa4d47c3d904b8c94a0adb07acce Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sat, 19 Feb 2011 22:35:55 +0100 Subject: drm: drop commented out code and preceding comment r100_gpu_init() was dropped in 90aca4d ("drm/radeon/kms: simplify & improve GPU reset V2") but here it was only commented out. Signed-off-by: Paul Bolle Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 56deae5bf02e..be817f891ec8 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3801,8 +3801,6 @@ static int r100_startup(struct radeon_device *rdev) r100_mc_program(rdev); /* Resume clock */ r100_clock_startup(rdev); - /* Initialize GPU configuration (# pipes, ...) */ -// r100_gpu_init(rdev); /* Initialize GART (initialize after TTM so we can allocate * memory through TTM but finalize after TTM) */ r100_enable_bm(rdev); -- cgit v1.2.3 From 45e4039c3aea597ede44a264cea322908cdedfe9 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 20 Feb 2011 21:57:32 +0000 Subject: drm/radeon: fix regression with AA resolve checking Some userspaces can emit a whole packet without disabling AA resolve by the looks of it, so we have to deal with them. Signed-off-by: Dave Airlie Tested-by: Jorg Otte --- drivers/gpu/drm/radeon/r100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index be817f891ec8..93fa735c8c1a 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3490,7 +3490,7 @@ void r100_cs_track_clear(struct radeon_device *rdev, struct r100_cs_track *track track->num_texture = 16; track->maxy = 4096; track->separate_cube = 0; - track->aaresolve = true; + track->aaresolve = false; track->aa.robj = NULL; } -- cgit v1.2.3 From f72487e7a1827f5e95425b80ec4fcc4f928329e8 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Tue, 22 Feb 2011 12:25:39 +0530 Subject: i2c-omap: fix build for !CONFIG_SUSPEND fix the build break when !CONFIG_SUSPEND drivers/i2c/busses/i2c-omap.c:1173: error: lvalue required as unary '&' operand make[3]: *** [drivers/i2c/busses/i2c-omap.o] Error 1 make[2]: *** [drivers/i2c/busses] Error 2 make[1]: *** [drivers/i2c] Error 2 make: *** [drivers] Error 2 Signed-off-by: Balaji T K Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 0541df90b9fb..adc1ee53b1a1 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1160,8 +1160,9 @@ static struct dev_pm_ops omap_i2c_pm_ops = { .suspend = omap_i2c_suspend, .resume = omap_i2c_resume, }; +#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops) #else -#define omap_i2c_pm_ops NULL +#define OMAP_I2C_PM_OPS NULL #endif static struct platform_driver omap_i2c_driver = { @@ -1170,7 +1171,7 @@ static struct platform_driver omap_i2c_driver = { .driver = { .name = "omap_i2c", .owner = THIS_MODULE, - .pm = &omap_i2c_pm_ops, + .pm = OMAP_I2C_PM_OPS, }, }; -- cgit v1.2.3 From cb527ede1bf6ff2008a025606f25344b8ed7b4ac Mon Sep 17 00:00:00 2001 From: Richard woodruff Date: Wed, 16 Feb 2011 10:24:16 +0530 Subject: i2c-omap: Double clear of ARDY status in IRQ handler This errata occurs when the ARDY interrupt generation is enabled. At the begining of every new transaction the ARDY interrupt is cleared. On continuous i2c transactions where after clearing the ARDY bit from I2C_STAT register (clearing the interrupt), the IRQ line is reasserted and the I2C_STAT[ARDY] bit set again on 1. In fact, the ARDY status bit is not cleared at the write access to I2C_STAT[ARDY] and only the IRQ line is deasserted and then reasserted. This is not captured in the usual errata documents. The workaround is to have a double clear of ARDY status in irq handler. Signed-off-by: Richard woodruff Signed-off-by: Keerthy Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index adc1ee53b1a1..e3f925ac1c39 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -847,11 +847,15 @@ complete: dev_err(dev->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; } + /* + * ProDB0017052: Clear ARDY bit twice + */ if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR | - OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); + OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR | + OMAP_I2C_STAT_ARDY)); omap_i2c_complete_cmd(dev, err); return IRQ_HANDLED; } -- cgit v1.2.3 From a5a595cc36bbbe16f6a3f0e6968f94a0604bfd28 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 23 Feb 2011 00:43:55 +0000 Subject: i2c-omap: fixup commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac whitespace Fixup the whitespace error noticed in cb527ede1bf6ff2008a025606f25344b8ed7b4ac Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index e3f925ac1c39..829a2a1029f7 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -847,9 +847,9 @@ complete: dev_err(dev->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; } - /* + /* * ProDB0017052: Clear ARDY bit twice - */ + */ if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, stat & -- cgit v1.2.3 From 8212a49d1c1e53ad2bc3176b983a2483b48fd989 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 8 Feb 2011 13:55:59 -0800 Subject: USB: xhci: mark local functions as static Functions that are not used outsde of the module they are defined should be marked as static. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-dbg.c | 4 ++-- drivers/usb/host/xhci-mem.c | 4 ++-- drivers/usb/host/xhci.c | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 582937e2132f..0231814a97a5 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -450,7 +450,7 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci, } } -void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) +static void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { /* Fields are 32 bits wide, DMA addresses are in bytes */ int field_size = 32 / 8; @@ -489,7 +489,7 @@ void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) dbg_rsvd64(xhci, (u64 *)slot_ctx, dma); } -void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, +static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep) { diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index dbb8bcd3919e..a9534396e85b 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -307,7 +307,7 @@ struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, /***************** Streams structures manipulation *************************/ -void xhci_free_stream_ctx(struct xhci_hcd *xhci, +static void xhci_free_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, struct xhci_stream_ctx *stream_ctx, dma_addr_t dma) { @@ -335,7 +335,7 @@ void xhci_free_stream_ctx(struct xhci_hcd *xhci, * The stream context array must be a power of 2, and can be as small as * 64 bytes or as large as 1MB. */ -struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, +static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, dma_addr_t *dma, gfp_t mem_flags) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 9784880df584..2083fc2179b2 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -109,7 +109,7 @@ int xhci_halt(struct xhci_hcd *xhci) /* * Set the run bit and wait for the host to be running. */ -int xhci_start(struct xhci_hcd *xhci) +static int xhci_start(struct xhci_hcd *xhci) { u32 temp; int ret; @@ -329,7 +329,7 @@ int xhci_init(struct usb_hcd *hcd) #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING -void xhci_event_ring_work(unsigned long arg) +static void xhci_event_ring_work(unsigned long arg) { unsigned long flags; int temp; @@ -857,7 +857,7 @@ unsigned int xhci_last_valid_endpoint(u32 added_ctxs) /* Returns 1 if the arguments are OK; * returns 0 this is a root hub; returns -EINVAL for NULL pointers. */ -int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, +static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev, const char *func) { struct xhci_hcd *xhci; @@ -1693,7 +1693,7 @@ static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci, xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags)); } -void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, +static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state) { -- cgit v1.2.3 From 49495d44dfa4ba76cf7d1ed8fe84746dd9552255 Mon Sep 17 00:00:00 2001 From: Florian Mickler Date: Mon, 7 Feb 2011 23:29:31 +0100 Subject: amd64-agp: fix crash at second module load The module forgot to sometimes unregister some resources. This fixes Bug #22882. [Patch updated to 2.6.38-rc3 by Randy Dunlap.] Tested-by: Randy Dunlap Signed-off-by: Florian Mickler Signed-off-by: Dave Airlie --- drivers/char/agp/amd64-agp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 9252e85706ef..780498d76581 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -773,18 +773,23 @@ int __init agp_amd64_init(void) #else printk(KERN_INFO PFX "You can boot with agp=try_unsupported\n"); #endif + pci_unregister_driver(&agp_amd64_pci_driver); return -ENODEV; } /* First check that we have at least one AMD64 NB */ - if (!pci_dev_present(amd_nb_misc_ids)) + if (!pci_dev_present(amd_nb_misc_ids)) { + pci_unregister_driver(&agp_amd64_pci_driver); return -ENODEV; + } /* Look for any AGP bridge */ agp_amd64_pci_driver.id_table = agp_amd64_pci_promisc_table; err = driver_attach(&agp_amd64_pci_driver.driver); - if (err == 0 && agp_bridges_found == 0) + if (err == 0 && agp_bridges_found == 0) { + pci_unregister_driver(&agp_amd64_pci_driver); err = -ENODEV; + } } return err; } -- cgit v1.2.3 From 9bb794ae0509f39abad6593793ec86d490bad31b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 22 Feb 2011 20:15:07 -0800 Subject: Input: synaptics - document 0x0c query Since Synaptics technical writers department is a bit slow releasing updated Synaptics interface guide, let's add some new bits (with their blessing) to the code so that they don't get lost. Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 25e5d042a72c..7453938bf5ef 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -51,6 +51,29 @@ #define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20) #define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12) #define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16) + +/* + * The following describes response for the 0x0c query. + * + * byte mask name meaning + * ---- ---- ------- ------------ + * 1 0x01 adjustable threshold capacitive button sensitivity + * can be adjusted + * 1 0x02 report max query 0x0d gives max coord reported + * 1 0x04 clearpad sensor is ClearPad product + * 1 0x08 advanced gesture not particularly meaningful + * 1 0x10 clickpad bit 0 1-button ClickPad + * 1 0x60 multifinger mode identifies firmware finger counting + * (not reporting!) algorithm. + * Not particularly meaningful + * 1 0x80 covered pad W clipped to 14, 15 == pad mostly covered + * 2 0x01 clickpad bit 1 2-button ClickPad + * 2 0x02 deluxe LED controls touchpad support LED commands + * ala multimedia control bar + * 2 0x04 reduced filtering firmware does less filtering on + * position data, driver should watch + * for noise. + */ #define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */ #define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */ #define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000) -- cgit v1.2.3 From 1d64b655dc083df5c5ac39945ccbbc6532903bf1 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 23 Feb 2011 08:51:28 -0800 Subject: Input: serio/gameport - use 'long' system workqueue Commit 8ee294cd9def0004887da7f44b80563493b0a097 converted serio subsystem event handling from using a dedicated thread to using common workqueue. Unfortunately, this regressed our boot times, due to the fact that serio jobs take long time to execute. While the new concurrency managed workqueue code manages long-playing works just fine and schedules additional workers as needed, such works wreck havoc among remaining users of flush_scheduled_work(). To solve this problem let's move serio/gameport works from system_wq to system_long_wq which nobody tries to flush. Reported-and-tested-by: Hernando Torque Acked-by: Tejun Heo Signed-off-by: Dmitry Torokhov --- drivers/input/gameport/gameport.c | 2 +- drivers/input/serio/serio.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c index dbf741c95835..ce57ede6e981 100644 --- a/drivers/input/gameport/gameport.c +++ b/drivers/input/gameport/gameport.c @@ -360,7 +360,7 @@ static int gameport_queue_event(void *object, struct module *owner, event->owner = owner; list_add_tail(&event->node, &gameport_event_list); - schedule_work(&gameport_event_work); + queue_work(system_long_wq, &gameport_event_work); out: spin_unlock_irqrestore(&gameport_event_lock, flags); diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index 7c38d1fbabf2..ba70058e2be3 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -299,7 +299,7 @@ static int serio_queue_event(void *object, struct module *owner, event->owner = owner; list_add_tail(&event->node, &serio_event_list); - schedule_work(&serio_event_work); + queue_work(system_long_wq, &serio_event_work); out: spin_unlock_irqrestore(&serio_event_lock, flags); -- cgit v1.2.3 From 8dde924217fdf5b69f6cbbdca099d077ba269ad0 Mon Sep 17 00:00:00 2001 From: Henry Nestler Date: Sun, 20 Feb 2011 11:44:58 +0000 Subject: DM9000B: Fix reg_save after spin_lock in dm9000_timeout The spin_lock should hold before reading register. Signed-off-by: David S. Miller --- drivers/net/dm9000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 2d4c4fc1d900..2bbd49653aa2 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -852,8 +852,8 @@ static void dm9000_timeout(struct net_device *dev) unsigned long flags; /* Save previous register address */ - reg_save = readb(db->io_addr); spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); netif_stop_queue(dev); dm9000_reset(db); -- cgit v1.2.3 From 108f518cc4f81eb8e3b46a0bd5cb902ef90a51a8 Mon Sep 17 00:00:00 2001 From: Henry Nestler Date: Tue, 22 Feb 2011 11:29:42 +0000 Subject: DM9000B: Fix PHY power for network down/up DM9000 revision B needs 1 ms delay after PHY power-on. PHY must be powered on by writing 0 into register DM9000_GPR before all other settings will change (see Davicom spec and example code). Remember, that register DM9000_GPR was not changed by reset sequence. Without this fix the FIFO is out of sync and sends wrong data after sequence of "ifconfig ethX down ; ifconfig ethX up". Signed-off-by: David S. Miller --- drivers/net/dm9000.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 2bbd49653aa2..461dd6f905f7 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -802,10 +802,7 @@ dm9000_init_dm9000(struct net_device *dev) /* Checksum mode */ dm9000_set_rx_csum_unlocked(dev, db->rx_csum); - /* GPIO0 on pre-activate PHY */ - iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ - iow(db, DM9000_GPR, 0); /* Enable PHY */ ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0; @@ -1194,6 +1191,10 @@ dm9000_open(struct net_device *dev) if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev)) return -EAGAIN; + /* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */ + iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ + mdelay(1); /* delay needs by DM9000B */ + /* Initialize DM9000 board */ dm9000_reset(db); dm9000_init_dm9000(dev); -- cgit v1.2.3 From fac5b3caa1f5bc07ecfb4f5ce98f8112638dc8fb Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Tue, 22 Feb 2011 17:26:20 +0800 Subject: r8169: fix incorrect args to oob notify. It results in the wrong point address and influences RTL8168DP. Signed-off-by: Hayes Wang Acked-by: Francois Romieu --- drivers/net/r8169.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 469ab0b7ce31..550c86589649 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -617,8 +617,9 @@ static void ocp_write(struct rtl8169_private *tp, u8 mask, u16 reg, u32 data) } } -static void rtl8168_oob_notify(void __iomem *ioaddr, u8 cmd) +static void rtl8168_oob_notify(struct rtl8169_private *tp, u8 cmd) { + void __iomem *ioaddr = tp->mmio_addr; int i; RTL_W8(ERIDR, cmd); @@ -630,7 +631,7 @@ static void rtl8168_oob_notify(void __iomem *ioaddr, u8 cmd) break; } - ocp_write(ioaddr, 0x1, 0x30, 0x00000001); + ocp_write(tp, 0x1, 0x30, 0x00000001); } #define OOB_CMD_RESET 0x00 -- cgit v1.2.3 From d24e9aafe5d5dfdf6d114b29e67f8afd5fae5ef0 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Tue, 22 Feb 2011 17:26:19 +0800 Subject: r8169: correct settings of rtl8102e. Adjust and remove certain settings of RTL8102E which are for previous chips. Signed-off-by: Hayes Wang Acked-off-by: Francois Romieu --- drivers/net/r8169.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 550c86589649..336ba9480e18 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3043,7 +3043,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_mwi_2; } - tp->cp_cmd = PCIMulRW | RxChkSum; + tp->cp_cmd = RxChkSum; if ((sizeof(dma_addr_t) > 4) && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) { @@ -3848,8 +3848,7 @@ static void rtl_hw_start_8168(struct net_device *dev) Cxpl_dbg_sel | \ ASF | \ PktCntrDisable | \ - PCIDAC | \ - PCIMulRW) + Mac_dbgo_sel) static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev) { @@ -3879,8 +3878,6 @@ static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev) if ((cfg1 & LEDS0) && (cfg1 & LEDS1)) RTL_W8(Config1, cfg1 & ~LEDS0); - RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK); - rtl_ephy_init(ioaddr, e_info_8102e_1, ARRAY_SIZE(e_info_8102e_1)); } @@ -3892,8 +3889,6 @@ static void rtl_hw_start_8102e_2(void __iomem *ioaddr, struct pci_dev *pdev) RTL_W8(Config1, MEMMAP | IOMAP | VPD | PMEnable); RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en); - - RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK); } static void rtl_hw_start_8102e_3(void __iomem *ioaddr, struct pci_dev *pdev) @@ -3919,6 +3914,8 @@ static void rtl_hw_start_8101(struct net_device *dev) } } + RTL_W8(Cfg9346, Cfg9346_Unlock); + switch (tp->mac_version) { case RTL_GIGA_MAC_VER_07: rtl_hw_start_8102e_1(ioaddr, pdev); @@ -3933,14 +3930,13 @@ static void rtl_hw_start_8101(struct net_device *dev) break; } - RTL_W8(Cfg9346, Cfg9346_Unlock); + RTL_W8(Cfg9346, Cfg9346_Lock); RTL_W8(MaxTxPacketSize, TxPacketMax); rtl_set_rx_max_size(ioaddr, rx_buf_sz); - tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW; - + tp->cp_cmd &= ~R810X_CPCMD_QUIRK_MASK; RTL_W16(CPlusCmd, tp->cp_cmd); RTL_W16(IntrMitigate, 0x0000); @@ -3950,14 +3946,10 @@ static void rtl_hw_start_8101(struct net_device *dev) RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); rtl_set_rx_tx_config_registers(tp); - RTL_W8(Cfg9346, Cfg9346_Lock); - RTL_R8(IntrMask); rtl_set_rx_mode(dev); - RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); - RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000); RTL_W16(IntrMask, tp->intr_event); -- cgit v1.2.3 From 5d2e19572a66be1e349faba289b7bd049b85bc98 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Tue, 22 Feb 2011 17:26:22 +0800 Subject: r8169: fix RTL8168DP power off issue. - fix the RTL8111DP turn off the power when DASH is enabled. - RTL_GIGA_MAC_VER_27 must wait for tx finish before reset. Signed-off-by: Hayes Wang Acked-by: Francois Romieu --- drivers/net/r8169.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 336ba9480e18..ef2133b16f8c 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2869,8 +2869,11 @@ static void r8168_pll_power_down(struct rtl8169_private *tp) { void __iomem *ioaddr = tp->mmio_addr; - if (tp->mac_version == RTL_GIGA_MAC_VER_27) + if (((tp->mac_version == RTL_GIGA_MAC_VER_27) || + (tp->mac_version == RTL_GIGA_MAC_VER_28)) && + (ocp_read(tp, 0x0f, 0x0010) & 0x00008000)) { return; + } if (((tp->mac_version == RTL_GIGA_MAC_VER_23) || (tp->mac_version == RTL_GIGA_MAC_VER_24)) && @@ -2892,6 +2895,8 @@ static void r8168_pll_power_down(struct rtl8169_private *tp) switch (tp->mac_version) { case RTL_GIGA_MAC_VER_25: case RTL_GIGA_MAC_VER_26: + case RTL_GIGA_MAC_VER_27: + case RTL_GIGA_MAC_VER_28: RTL_W8(PMCH, RTL_R8(PMCH) & ~0x80); break; } @@ -2901,12 +2906,17 @@ static void r8168_pll_power_up(struct rtl8169_private *tp) { void __iomem *ioaddr = tp->mmio_addr; - if (tp->mac_version == RTL_GIGA_MAC_VER_27) + if (((tp->mac_version == RTL_GIGA_MAC_VER_27) || + (tp->mac_version == RTL_GIGA_MAC_VER_28)) && + (ocp_read(tp, 0x0f, 0x0010) & 0x00008000)) { return; + } switch (tp->mac_version) { case RTL_GIGA_MAC_VER_25: case RTL_GIGA_MAC_VER_26: + case RTL_GIGA_MAC_VER_27: + case RTL_GIGA_MAC_VER_28: RTL_W8(PMCH, RTL_R8(PMCH) | 0x80); break; } @@ -3319,7 +3329,8 @@ static void rtl8169_hw_reset(struct rtl8169_private *tp) /* Disable interrupts */ rtl8169_irq_mask_and_ack(ioaddr); - if (tp->mac_version == RTL_GIGA_MAC_VER_28) { + if (tp->mac_version == RTL_GIGA_MAC_VER_27 || + tp->mac_version == RTL_GIGA_MAC_VER_28) { while (RTL_R8(TxPoll) & NPQ) udelay(20); -- cgit v1.2.3 From 67158cebde60edb1a11cf4743f1cb9ded847c5fc Mon Sep 17 00:00:00 2001 From: Shahar Havivi Date: Tue, 22 Feb 2011 04:41:11 +0000 Subject: Added support for usb ethernet (0x0fe6, 0x9700) The device is very similar to (0x0fe6, 0x8101), And works well with dm9601 driver. Signed-off-by: Shahar Havivi Acked-by: Peter Korsgaard Signed-off-by: David S. Miller --- drivers/net/usb/dm9601.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 02b622e3b9fb..5002f5be47be 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -650,6 +650,10 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0fe6, 0x8101), /* DM9601 USB to Fast Ethernet Adapter */ .driver_info = (unsigned long)&dm9601_info, }, + { + USB_DEVICE(0x0fe6, 0x9700), /* DM9601 USB to Fast Ethernet Adapter */ + .driver_info = (unsigned long)&dm9601_info, + }, { USB_DEVICE(0x0a46, 0x9000), /* DM9000E */ .driver_info = (unsigned long)&dm9601_info, -- cgit v1.2.3 From c2e0eb167070a6e9dcb49c84c13c79a30d672431 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 22 Feb 2011 18:25:49 +0100 Subject: drm/i915: fix corruptions on i8xx due to relaxed fencing It looks like gen2 has a peculiar interleaved 2-row inter-tile layout. Probably inherited from i81x which had 2kb tiles (which naturally fit an even-number-of-tile-rows scheme to fit onto 4kb pages). There is no other mention of this in any docs (also not in the Intel internal documention according to Chris Wilson). Problem manifests itself in corruptions in the second half of the last tile row (if the bo has an odd number of tiles). Which can only happen with relaxed tiling (introduced in a00b10c360b35d6431a9). So reject set_tiling calls that don't satisfy this constrain to prevent broken userspace from causing havoc. While at it, also check the size for newer chipsets. LKML: https://lkml.org/lkml/2011/2/19/5 Reported-by: Indan Zupancic Tested-by: Indan Zupancic Signed-off-by: Daniel Vetter Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_gem_tiling.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 22a32b9932c5..79a04fde69b5 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -184,7 +184,7 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) static bool i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) { - int tile_width; + int tile_width, tile_height; /* Linear is always fine */ if (tiling_mode == I915_TILING_NONE) @@ -215,6 +215,20 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) } } + if (IS_GEN2(dev) || + (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))) + tile_height = 32; + else + tile_height = 8; + /* i8xx is strange: It has 2 interleaved rows of tiles, so needs an even + * number of tile rows. */ + if (IS_GEN2(dev)) + tile_height *= 2; + + /* Size needs to be aligned to a full tile row */ + if (size & (tile_height * stride - 1)) + return false; + /* 965+ just needs multiples of tile width */ if (INTEL_INFO(dev)->gen >= 4) { if (stride & (tile_width - 1)) -- cgit v1.2.3 From 78794b2cdeac37ac1fd950fc9c4454b56d88ac03 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 23 Feb 2011 19:42:03 -0800 Subject: Revert "Bluetooth: Enable USB autosuspend by default on btusb" This reverts commit 556ea928f78a390fe16ae584e6433dff304d3014. Jeff Chua reports that it can cause some bluetooth devices (he mentions an Bluetooth Intermec scanner) to just stop responding after a while with messages like [ 4533.361959] btusb 8-1:1.0: no reset_resume for driver btusb? [ 4533.361964] btusb 8-1:1.1: no reset_resume for driver btusb? from the kernel. See also https://bugzilla.kernel.org/show_bug.cgi?id=26182 for other reports. Reported-by: Jeff Chua Reported-by: Andrew Meakovski Reported-by: Jim Faulkner Acked-by: Greg KH Acked-by: Matthew Garrett Acked-by: Gustavo F. Padovan Cc: stable@kernel.org (for 2.6.37) Signed-off-by: Linus Torvalds --- drivers/bluetooth/btusb.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index b7f2f373c631..700a3840fddc 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1044,8 +1044,6 @@ static int btusb_probe(struct usb_interface *intf, usb_set_intfdata(intf, data); - usb_enable_autosuspend(interface_to_usbdev(intf)); - return 0; } -- cgit v1.2.3 From 93b270f76e7ef3b81001576860c2701931cdc78b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 24 Feb 2011 17:25:47 +1100 Subject: Fix over-zealous flush_disk when changing device size. There are two cases when we call flush_disk. In one, the device has disappeared (check_disk_change) so any data will hold becomes irrelevant. In the oter, the device has changed size (check_disk_size_change) so data we hold may be irrelevant. In both cases it makes sense to discard any 'clean' buffers, so they will be read back from the device if needed. In the former case it makes sense to discard 'dirty' buffers as there will never be anywhere safe to write the data. In the second case it *does*not* make sense to discard dirty buffers as that will lead to file system corruption when you simply enlarge the containing devices. flush_disk calls __invalidate_devices. __invalidate_device calls both invalidate_inodes and invalidate_bdev. invalidate_inodes *does* discard I_DIRTY inodes and this does lead to fs corruption. invalidate_bev *does*not* discard dirty pages, but I don't really care about that at present. So this patch adds a flag to __invalidate_device (calling it __invalidate_device2) to indicate whether dirty buffers should be killed, and this is passed to invalidate_inodes which can choose to skip dirty inodes. flusk_disk then passes true from check_disk_change and false from check_disk_size_change. dm avoids tripping over this problem by calling i_size_write directly rathher than using check_disk_size_change. md does use check_disk_size_change and so is affected. This regression was introduced by commit 608aeef17a which causes check_disk_size_change to call flush_disk, so it is suitable for any kernel since 2.6.27. Cc: stable@kernel.org Acked-by: Jeff Moyer Cc: Andrew Patterson Cc: Jens Axboe Signed-off-by: NeilBrown --- drivers/block/floppy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index b9ba04fc2b34..77fc76f8aea9 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3281,7 +3281,7 @@ static int set_geometry(unsigned int cmd, struct floppy_struct *g, struct block_device *bdev = opened_bdev[cnt]; if (!bdev || ITYPE(drive_state[cnt].fd_device) != type) continue; - __invalidate_device(bdev); + __invalidate_device(bdev, true); } mutex_unlock(&open_lock); } else { -- cgit v1.2.3 From f0b4f7e2f29af678bd9af43422c537dcb6008603 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 24 Feb 2011 17:26:41 +1100 Subject: md: Fix - again - partition detection when array becomes active Revert b821eaa572fd737faaf6928ba046e571526c36c6 and f3b99be19ded511a1bf05a148276239d9f13eefa When I wrote the first of these I had a wrong idea about the lifetime of 'struct block_device'. It can disappear at any time that the block device is not open if it falls out of the inode cache. So relying on the 'size' recorded with it to detect when the device size has changed and so we need to revalidate, is wrong. Rather, we really do need the 'changed' attribute stored directly in the mddev and set/tested as appropriate. Without this patch, a sequence of: mknod / open / close / unlink (which can cause a block_device to be created and then destroyed) will result in a rescan of the partition table and consequence removal and addition of partitions. Several of these in a row can get udev racing to create and unlink and other code can get confused. With the patch, the rescan is only performed when needed and so there are no races. This is suitable for any stable kernel from 2.6.35. Reported-by: "Wojcik, Krzysztof" Signed-off-by: NeilBrown Cc: stable@kernel.org --- drivers/md/md.c | 22 +++++++++++++++++++++- drivers/md/md.h | 2 ++ 2 files changed, 23 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 330addfe9b77..818313e277e7 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4627,6 +4627,7 @@ static int do_md_run(mddev_t *mddev) } set_capacity(mddev->gendisk, mddev->array_sectors); revalidate_disk(mddev->gendisk); + mddev->changed = 1; kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE); out: return err; @@ -4715,6 +4716,7 @@ static void md_clean(mddev_t *mddev) mddev->sync_speed_min = mddev->sync_speed_max = 0; mddev->recovery = 0; mddev->in_sync = 0; + mddev->changed = 0; mddev->degraded = 0; mddev->safemode = 0; mddev->bitmap_info.offset = 0; @@ -4830,6 +4832,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) set_capacity(disk, 0); mutex_unlock(&mddev->open_mutex); + mddev->changed = 1; revalidate_disk(disk); if (mddev->ro) @@ -6014,7 +6017,7 @@ static int md_open(struct block_device *bdev, fmode_t mode) atomic_inc(&mddev->openers); mutex_unlock(&mddev->open_mutex); - check_disk_size_change(mddev->gendisk, bdev); + check_disk_change(bdev); out: return err; } @@ -6029,6 +6032,21 @@ static int md_release(struct gendisk *disk, fmode_t mode) return 0; } + +static int md_media_changed(struct gendisk *disk) +{ + mddev_t *mddev = disk->private_data; + + return mddev->changed; +} + +static int md_revalidate(struct gendisk *disk) +{ + mddev_t *mddev = disk->private_data; + + mddev->changed = 0; + return 0; +} static const struct block_device_operations md_fops = { .owner = THIS_MODULE, @@ -6039,6 +6057,8 @@ static const struct block_device_operations md_fops = .compat_ioctl = md_compat_ioctl, #endif .getgeo = md_getgeo, + .media_changed = md_media_changed, + .revalidate_disk= md_revalidate, }; static int md_thread(void * arg) diff --git a/drivers/md/md.h b/drivers/md/md.h index 7e90b8593b2a..12215d437fcc 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -274,6 +274,8 @@ struct mddev_s atomic_t active; /* general refcount */ atomic_t openers; /* number of active opens */ + int changed; /* True if we might need to + * reread partition info */ int degraded; /* whether md should consider * adding a spare */ -- cgit v1.2.3 From 995073072c2ae72255b595b192cc63f43fd386ef Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 24 Feb 2011 09:42:52 +0000 Subject: drm/i915: Fix unintended recursion in ironlake_disable_rc6 After disabling, we're meant to teardown the bo used for the contexts, not recurse into ourselves again and preventing module unload. Reported-and-tested-by: Ben Widawsky Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9ca1bb2554fc..e79b25bbee6c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6575,7 +6575,7 @@ static void ironlake_disable_rc6(struct drm_device *dev) POSTING_READ(RSTDBYCTL); } - ironlake_disable_rc6(dev); + ironlake_teardown_rc6(dev); } static int ironlake_setup_rc6(struct drm_device *dev) -- cgit v1.2.3 From ec95d35a6bd0047f05fe8a21e6c52f8bb418da55 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 24 Feb 2011 10:36:53 +0200 Subject: usb: musb: core: set has_tt flag MUSB is a non-standard host implementation which can handle all speeds with the same core. We need to set has_tt flag after commit d199c96d41d80a567493e12b8e96ea056a1350c1 (USB: prevent buggy hubs from crashing the USB stack) in order for MUSB HCD to continue working. Signed-off-by: Felipe Balbi Cc: stable Cc: Alan Stern Tested-by: Michael Jones Tested-by: Alexander Holler Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 54a8bd1047d6..c292d5c499e7 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1864,6 +1864,7 @@ allocate_instance(struct device *dev, INIT_LIST_HEAD(&musb->out_bulk); hcd->uses_new_polling = 1; + hcd->has_tt = 1; musb->vbuserr_retry = VBUSERR_RETRY_COUNT; musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON; -- cgit v1.2.3 From 9ee291a453c1db310c0298f8e6c28794cd2c52bd Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 2 Feb 2011 20:17:22 +0000 Subject: regulator: Fix warning with CONFIG_BUG disabled Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/wm831x-dcdc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 8b0d2c4bde91..06df898842c0 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -120,6 +120,7 @@ static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev) return REGULATOR_MODE_IDLE; default: BUG(); + return -EINVAL; } } -- cgit v1.2.3 From 4b2f67d756cf4a5ed8e8d11caa7dcea06c41a09e Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 23 Feb 2011 23:45:55 +0100 Subject: regulator, mc13xxx: Remove pointless test for unsigned less than zero The variable 'val' is a 'unsigned int', so it can never be less than zero. This fact makes the "val < 0" part of the test done in BUG_ON() in mc13xxx_regulator_get_voltage() rather pointles since it can never have any effect. This patch removes the pointless test. Signed-off-by: Jesper Juhl Acked-by: Alberto Panizzo Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/mc13xxx-regulator-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c index f53d31b950d4..2bb5de1f2421 100644 --- a/drivers/regulator/mc13xxx-regulator-core.c +++ b/drivers/regulator/mc13xxx-regulator-core.c @@ -174,7 +174,7 @@ static int mc13xxx_regulator_get_voltage(struct regulator_dev *rdev) dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val); - BUG_ON(val < 0 || val > mc13xxx_regulators[id].desc.n_voltages); + BUG_ON(val > mc13xxx_regulators[id].desc.n_voltages); return mc13xxx_regulators[id].voltages[val]; } -- cgit v1.2.3 From d40358509ee862d7e4049187bc05eba1911a2959 Mon Sep 17 00:00:00 2001 From: Jelle Martijn Kok Date: Fri, 25 Feb 2011 11:13:55 -0800 Subject: RTC: fix typo in drivers/rtc/rtc-at91sam9.c The member of the rtc_class_ops struct is called alarm_irq_enable and not alarm_irq_enabled CC: Thomas Gleixner Signed-off-by: Jelle Martijn Kok Signed-off-by: John Stultz Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-at91sam9.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index c36749e4c926..5469c52cba3d 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -309,7 +309,7 @@ static const struct rtc_class_ops at91_rtc_ops = { .read_alarm = at91_rtc_readalarm, .set_alarm = at91_rtc_setalarm, .proc = at91_rtc_proc, - .alarm_irq_enabled = at91_rtc_alarm_irq_enable, + .alarm_irq_enable = at91_rtc_alarm_irq_enable, }; /* -- cgit v1.2.3 From d73fa4b914eab332d9919132b273b6797b8aface Mon Sep 17 00:00:00 2001 From: "Matti J. Aaltonen" Date: Fri, 25 Feb 2011 14:44:18 -0800 Subject: drivers/nfc/Kconfig: use full form of the NFC acronym Spell out the NFC acronym when it's shown for the first time. Signed-off-by: Matti J. Aaltonen Acked-by: Wolfram Sang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/nfc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index ffedfd492754..ea1580085347 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -3,7 +3,7 @@ # menuconfig NFC_DEVICES - bool "NFC devices" + bool "Near Field Communication (NFC) devices" default n ---help--- You'll have to say Y if your computer contains an NFC device that -- cgit v1.2.3 From ac3c8304190ed0daaa2fb01ce2a069be5e2a52a7 Mon Sep 17 00:00:00 2001 From: "Matti J. Aaltonen" Date: Fri, 25 Feb 2011 14:44:19 -0800 Subject: drivers/nfc/pn544.c: add missing regulator The regulator framework is used for power management. The regulators are only named in the driver code, the actual control stuff is in the board file for each architecture or use case. The PN544 chip has three regulators that can be controlled or not - depending on the architecture where the chip is being used. So some of the regulators may not be controllable. In our current case the third regulator, which was missing from the code, went unnoticed because we didn't need to control it. To be as general as possible - in this respect - the driver needs to list all regulators. Then the board file can be used to actually set the usage. Signed-off-by: Matti J. Aaltonen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/nfc/pn544.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nfc/pn544.c b/drivers/nfc/pn544.c index bae647264dd6..724f65d8f9e4 100644 --- a/drivers/nfc/pn544.c +++ b/drivers/nfc/pn544.c @@ -60,7 +60,7 @@ enum pn544_irq { struct pn544_info { struct miscdevice miscdev; struct i2c_client *i2c_dev; - struct regulator_bulk_data regs[2]; + struct regulator_bulk_data regs[3]; enum pn544_state state; wait_queue_head_t read_wait; @@ -74,6 +74,7 @@ struct pn544_info { static const char reg_vdd_io[] = "Vdd_IO"; static const char reg_vbat[] = "VBat"; +static const char reg_vsim[] = "VSim"; /* sysfs interface */ static ssize_t pn544_test(struct device *dev, @@ -740,6 +741,7 @@ static int __devinit pn544_probe(struct i2c_client *client, info->regs[0].supply = reg_vdd_io; info->regs[1].supply = reg_vbat; + info->regs[2].supply = reg_vsim; r = regulator_bulk_get(&client->dev, ARRAY_SIZE(info->regs), info->regs); if (r < 0) -- cgit v1.2.3 From a2d6d2fa90c0e1d2cc1d59ccb5bbe93bb28b7413 Mon Sep 17 00:00:00 2001 From: Lei Xu Date: Fri, 25 Feb 2011 14:44:23 -0800 Subject: drivers/rtc/rtc-ds3232.c: fix time range difference between linux and RTC chip In linux rtc_time struct, tm_mon range is 0~11, tm_wday range is 0~6, while in RTC HW REG, month range is 1~12, day of the week range is 1~7, this patch adjusts difference of them. The efect of this bug was that most of month will be operated on as the next month by the hardware (When in Jan it maybe even worse). For example, if in May, software wrote 4 to the hardware, which handled it as April. Then the logic would be different between software and hardware, which would cause weird things to happen. Signed-off-by: Lei Xu Cc: Alessandro Zummo Cc: john stultz Cc: Jack Lan Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds3232.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c index 23a9ee19764c..950735415a7c 100644 --- a/drivers/rtc/rtc-ds3232.c +++ b/drivers/rtc/rtc-ds3232.c @@ -1,7 +1,7 @@ /* * RTC client/driver for the Maxim/Dallas DS3232 Real-Time Clock over I2C * - * Copyright (C) 2009-2010 Freescale Semiconductor. + * Copyright (C) 2009-2011 Freescale Semiconductor. * Author: Jack Lan * * This program is free software; you can redistribute it and/or modify it @@ -141,9 +141,11 @@ static int ds3232_read_time(struct device *dev, struct rtc_time *time) time->tm_hour = bcd2bin(hour); } - time->tm_wday = bcd2bin(week); + /* Day of the week in linux range is 0~6 while 1~7 in RTC chip */ + time->tm_wday = bcd2bin(week) - 1; time->tm_mday = bcd2bin(day); - time->tm_mon = bcd2bin(month & 0x7F); + /* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */ + time->tm_mon = bcd2bin(month & 0x7F) - 1; if (century) add_century = 100; @@ -162,9 +164,11 @@ static int ds3232_set_time(struct device *dev, struct rtc_time *time) buf[0] = bin2bcd(time->tm_sec); buf[1] = bin2bcd(time->tm_min); buf[2] = bin2bcd(time->tm_hour); - buf[3] = bin2bcd(time->tm_wday); /* Day of the week */ + /* Day of the week in linux range is 0~6 while 1~7 in RTC chip */ + buf[3] = bin2bcd(time->tm_wday + 1); buf[4] = bin2bcd(time->tm_mday); /* Date */ - buf[5] = bin2bcd(time->tm_mon); + /* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */ + buf[5] = bin2bcd(time->tm_mon + 1); if (time->tm_year >= 100) { buf[5] |= 0x80; buf[6] = bin2bcd(time->tm_year - 100); -- cgit v1.2.3 From 99b0d365e5ade293c5fa25a9f1a49ac764656670 Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Fri, 25 Feb 2011 14:44:30 -0800 Subject: pps: initialize ts_real properly Initialize ts_real.flags to fix compiler warning about possible uninitialized use of this field. Signed-off-by: Alexander Gordeev Cc: john stultz Cc: Rodolfo Giometti Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/kapi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pps/kapi.c b/drivers/pps/kapi.c index cba1b43f7519..a4e8eb9fece6 100644 --- a/drivers/pps/kapi.c +++ b/drivers/pps/kapi.c @@ -168,7 +168,7 @@ void pps_event(struct pps_device *pps, struct pps_event_time *ts, int event, { unsigned long flags; int captured = 0; - struct pps_ktime ts_real; + struct pps_ktime ts_real = { .sec = 0, .nsec = 0, .flags = 0 }; /* check event type */ BUG_ON((event & (PPS_CAPTUREASSERT | PPS_CAPTURECLEAR)) == 0); -- cgit v1.2.3 From fe41947e1aa12e96a50edaee123b4e4de03b668b Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 25 Feb 2011 14:44:31 -0800 Subject: rapidio: fix sysfs config attribute to access 16MB of maint space Fixes sysfs config attribute to allow access to entire 16MB maintenance space of RapidIO devices. Signed-off-by: Alexandre Bounine Cc: Kumar Gala Cc: Matt Porter Cc: Li Yang Cc: Thomas Moll Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/rio-sysfs.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index 76b41853a877..1269fbd2deca 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -77,9 +77,9 @@ rio_read_config(struct file *filp, struct kobject *kobj, /* Several chips lock up trying to read undefined config space */ if (capable(CAP_SYS_ADMIN)) - size = 0x200000; + size = RIO_MAINT_SPACE_SZ; - if (off > size) + if (off >= size) return 0; if (off + count > size) { size -= off; @@ -147,10 +147,10 @@ rio_write_config(struct file *filp, struct kobject *kobj, loff_t init_off = off; u8 *data = (u8 *) buf; - if (off > 0x200000) + if (off >= RIO_MAINT_SPACE_SZ) return 0; - if (off + count > 0x200000) { - size = 0x200000 - off; + if (off + count > RIO_MAINT_SPACE_SZ) { + size = RIO_MAINT_SPACE_SZ - off; count = size; } @@ -200,7 +200,7 @@ static struct bin_attribute rio_config_attr = { .name = "config", .mode = S_IRUGO | S_IWUSR, }, - .size = 0x200000, + .size = RIO_MAINT_SPACE_SZ, .read = rio_read_config, .write = rio_write_config, }; -- cgit v1.2.3 From 6407deb59466372fd7addca38fa2f44898591897 Mon Sep 17 00:00:00 2001 From: axel lin Date: Thu, 24 Feb 2011 02:20:37 +0000 Subject: hwmon: (ad7414) add MODULE_DEVICE_TABLE The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin Signed-off-by: Guenter Roeck --- drivers/hwmon/ad7414.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c index 86d822aa9bbf..d46c0c758ddf 100644 --- a/drivers/hwmon/ad7414.c +++ b/drivers/hwmon/ad7414.c @@ -242,6 +242,7 @@ static const struct i2c_device_id ad7414_id[] = { { "ad7414", 0 }, {} }; +MODULE_DEVICE_TABLE(i2c, ad7414_id); static struct i2c_driver ad7414_driver = { .driver = { -- cgit v1.2.3 From a7254d68b61c7873ce20591f0c56bf0245b72a76 Mon Sep 17 00:00:00 2001 From: axel lin Date: Thu, 24 Feb 2011 02:22:01 +0000 Subject: hwmon: (adt7411) add MODULE_DEVICE_TABLE The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin Acked-by: Wolfram Sang Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7411.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c index f13c843a2964..5cc3e3784b42 100644 --- a/drivers/hwmon/adt7411.c +++ b/drivers/hwmon/adt7411.c @@ -334,6 +334,7 @@ static const struct i2c_device_id adt7411_id[] = { { "adt7411", 0 }, { } }; +MODULE_DEVICE_TABLE(i2c, adt7411_id); static struct i2c_driver adt7411_driver = { .driver = { -- cgit v1.2.3 From 7db26623257a16c901a4b77bfc5096ee05304932 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 28 Feb 2011 14:22:12 +1000 Subject: drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo Somehow fixes a misrendering + hang at GDM startup on my NVA8... My first guess would have been stale TLB entries laying around that a new bo then accidentally inherits. That doesn't make a great deal of sense however, as when we mapped the pages for the new bo the TLBs would've gotten flushed anyway. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bo.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index d38a4d9f9b0b..a52184007f5f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -49,7 +49,10 @@ nouveau_bo_del_ttm(struct ttm_buffer_object *bo) DRM_ERROR("bo %p still attached to GEM object\n", bo); nv10_mem_put_tile_region(dev, nvbo->tile, NULL); - nouveau_vm_put(&nvbo->vma); + if (nvbo->vma.node) { + nouveau_vm_unmap(&nvbo->vma); + nouveau_vm_put(&nvbo->vma); + } kfree(nvbo); } -- cgit v1.2.3 From 1922756124ddd53846877416d92ba4a802bc658f Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 24 Feb 2011 08:35:06 +1000 Subject: drm: fix unsigned vs signed comparison issue in modeset ctl ioctl. This fixes CVE-2011-1013. Reported-by: Matthiew Herrb (OpenBSD X.org team) Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 53120a72a48c..28d1d3c24d65 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -1012,7 +1012,8 @@ int drm_modeset_ctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_modeset_ctl *modeset = data; - int crtc, ret = 0; + int ret = 0; + unsigned int crtc; /* If drm_vblank_init() hasn't been called yet, just no-op */ if (!dev->num_crtcs) -- cgit v1.2.3 From af06216a8ef1c430cc6ad22b562f3a11a512c5dd Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 1 Mar 2011 01:12:19 +0100 Subject: ACPI: Fix build for CONFIG_NET unset Several ACPI drivers fail to build if CONFIG_NET is unset, because they refer to things depending on CONFIG_THERMAL that in turn depends on CONFIG_NET. However, CONFIG_THERMAL doesn't really need to depend on CONFIG_NET, because the only part of it requiring CONFIG_NET is the netlink interface in thermal_sys.c. Put the netlink interface in thermal_sys.c under #ifdef CONFIG_NET and remove the dependency of CONFIG_THERMAL on CONFIG_NET from drivers/thermal/Kconfig. Signed-off-by: Rafael J. Wysocki Acked-by: Randy Dunlap Cc: Ingo Molnar Cc: Len Brown Cc: Stephen Rothwell Cc: Luming Yu Cc: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/thermal/Kconfig | 1 - drivers/thermal/thermal_sys.c | 40 +++++++++++++++++++++------------------- 2 files changed, 21 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index f7a5dba3ca23..bf7c687519ef 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -4,7 +4,6 @@ menuconfig THERMAL tristate "Generic Thermal sysfs driver" - depends on NET help Generic Thermal Sysfs driver offers a generic mechanism for thermal management. Usually it's made up of one or more thermal diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 7d0e63c79280..713b7ea4a607 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -62,20 +62,6 @@ static DEFINE_MUTEX(thermal_list_lock); static unsigned int thermal_event_seqnum; -static struct genl_family thermal_event_genl_family = { - .id = GENL_ID_GENERATE, - .name = THERMAL_GENL_FAMILY_NAME, - .version = THERMAL_GENL_VERSION, - .maxattr = THERMAL_GENL_ATTR_MAX, -}; - -static struct genl_multicast_group thermal_event_mcgrp = { - .name = THERMAL_GENL_MCAST_GROUP_NAME, -}; - -static int genetlink_init(void); -static void genetlink_exit(void); - static int get_idr(struct idr *idr, struct mutex *lock, int *id) { int err; @@ -1225,6 +1211,18 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) EXPORT_SYMBOL(thermal_zone_device_unregister); +#ifdef CONFIG_NET +static struct genl_family thermal_event_genl_family = { + .id = GENL_ID_GENERATE, + .name = THERMAL_GENL_FAMILY_NAME, + .version = THERMAL_GENL_VERSION, + .maxattr = THERMAL_GENL_ATTR_MAX, +}; + +static struct genl_multicast_group thermal_event_mcgrp = { + .name = THERMAL_GENL_MCAST_GROUP_NAME, +}; + int generate_netlink_event(u32 orig, enum events event) { struct sk_buff *skb; @@ -1301,6 +1299,15 @@ static int genetlink_init(void) return result; } +static void genetlink_exit(void) +{ + genl_unregister_family(&thermal_event_genl_family); +} +#else /* !CONFIG_NET */ +static inline int genetlink_init(void) { return 0; } +static inline void genetlink_exit(void) {} +#endif /* !CONFIG_NET */ + static int __init thermal_init(void) { int result = 0; @@ -1316,11 +1323,6 @@ static int __init thermal_init(void) return result; } -static void genetlink_exit(void) -{ - genl_unregister_family(&thermal_event_genl_family); -} - static void __exit thermal_exit(void) { class_unregister(&thermal_class); -- cgit v1.2.3 From 1654e7411a1ad4999fe7890ef51d2a2bbb1fcf76 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 2 Mar 2011 08:48:05 -0500 Subject: block: add @force_kblockd to __blk_run_queue() __blk_run_queue() automatically either calls q->request_fn() directly or schedules kblockd depending on whether the function is recursed. blk-flush implementation needs to be able to explicitly choose kblockd. Add @force_kblockd. All the current users are converted to specify %false for the parameter and this patch doesn't introduce any behavior change. stable: This is prerequisite for fixing ide oops caused by the new blk-flush implementation. Signed-off-by: Tejun Heo Cc: Jan Beulich Cc: James Bottomley Cc: stable@kernel.org Signed-off-by: Jens Axboe --- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/scsi_transport_fc.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 9045c52abd25..fb2bb35c62cb 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -443,7 +443,7 @@ static void scsi_run_queue(struct request_queue *q) &sdev->request_queue->queue_flags); if (flagset) queue_flag_set(QUEUE_FLAG_REENTER, sdev->request_queue); - __blk_run_queue(sdev->request_queue); + __blk_run_queue(sdev->request_queue, false); if (flagset) queue_flag_clear(QUEUE_FLAG_REENTER, sdev->request_queue); spin_unlock(sdev->request_queue->queue_lock); diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 998c01be3234..5c3ccfc6b622 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3829,7 +3829,7 @@ fc_bsg_goose_queue(struct fc_rport *rport) !test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags); if (flagset) queue_flag_set(QUEUE_FLAG_REENTER, rport->rqst_q); - __blk_run_queue(rport->rqst_q); + __blk_run_queue(rport->rqst_q, false); if (flagset) queue_flag_clear(QUEUE_FLAG_REENTER, rport->rqst_q); spin_unlock_irqrestore(rport->rqst_q->queue_lock, flags); -- cgit v1.2.3 From fd51469fb68b987032e46297e0a4fe9020063c20 Mon Sep 17 00:00:00 2001 From: Petr Uzel Date: Thu, 3 Mar 2011 11:48:50 -0500 Subject: block: kill loop_mutex Following steps lead to deadlock in kernel: dd if=/dev/zero of=img bs=512 count=1000 losetup -f img mkfs.ext2 /dev/loop0 mount -t ext2 -o loop /dev/loop0 mnt umount mnt/ Stacktrace: [] irq_exit+0x36/0x59 [] smp_apic_timer_interrupt+0x6b/0x75 [] apic_timer_interrupt+0x31/0x38 [] mutex_spin_on_owner+0x54/0x5b [] lo_release+0x12/0x67 [loop] [] __blkdev_put+0x7c/0x10c [] fput+0xd5/0x1aa [] loop_clr_fd+0x1a9/0x1b1 [loop] [] lo_release+0x39/0x67 [loop] [] __blkdev_put+0x7c/0x10c [] deactivate_locked_super+0x17/0x36 [] sys_umount+0x27e/0x2a5 [] sys_oldumount+0xb/0xe [] sysenter_do_call+0x12/0x26 [] 0xffffffff Regression since 2a48fc0ab24241755dc9, which introduced the private loop_mutex as part of the BKL removal process. As per [1], the mutex can be safely removed. [1] http://www.gossamer-threads.com/lists/linux/kernel/1341930 Addresses: https://bugzilla.novell.com/show_bug.cgi?id=669394 Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=29172 Signed-off-by: Petr Uzel Cc: stable@kernel.org Reviewed-by: Nikanth Karthikesan Acked-by: Arnd Bergmann Signed-off-by: Jens Axboe --- drivers/block/loop.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 49e6a545eb63..dbf31ec9114d 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -78,7 +78,6 @@ #include -static DEFINE_MUTEX(loop_mutex); static LIST_HEAD(loop_devices); static DEFINE_MUTEX(loop_devices_mutex); @@ -1501,11 +1500,9 @@ static int lo_open(struct block_device *bdev, fmode_t mode) { struct loop_device *lo = bdev->bd_disk->private_data; - mutex_lock(&loop_mutex); mutex_lock(&lo->lo_ctl_mutex); lo->lo_refcnt++; mutex_unlock(&lo->lo_ctl_mutex); - mutex_unlock(&loop_mutex); return 0; } @@ -1515,7 +1512,6 @@ static int lo_release(struct gendisk *disk, fmode_t mode) struct loop_device *lo = disk->private_data; int err; - mutex_lock(&loop_mutex); mutex_lock(&lo->lo_ctl_mutex); if (--lo->lo_refcnt) @@ -1540,7 +1536,6 @@ static int lo_release(struct gendisk *disk, fmode_t mode) out: mutex_unlock(&lo->lo_ctl_mutex); out_unlocked: - mutex_unlock(&loop_mutex); return 0; } -- cgit v1.2.3