From 1041638f2bba0f1de75e66086d50fb1251d64dcf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 19 Oct 2012 15:44:42 +0200 Subject: mac80211: add explicit AP/GO driver operations Depending on the driver, a lot of setup may be necessary to start operating as an AP, some of which may fail. Add an explicit AP start driver method to make such failures easier to handle, and add an AP stop driver method for symmetry. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 00b7204708bd..5f5327452c9a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2381,6 +2381,13 @@ enum ieee80211_rate_control_changed { * to vif. Possible use is for hw queue remapping. * @unassign_vif_chanctx: Notifies device driver about channel context being * unbound from vif. + * @start_ap: Start operation on the AP interface, this is called after all the + * information in bss_conf is set and beacon can be retrieved. A channel + * context is bound before this is called. Note that if the driver uses + * software scan or ROC, this (and @stop_ap) isn't called when the AP is + * just "paused" for scanning/ROC, which is indicated by the beacon being + * disabled/enabled via @bss_info_changed. + * @stop_ap: Stop operation on the AP interface. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2406,6 +2413,9 @@ struct ieee80211_ops { struct ieee80211_bss_conf *info, u32 changed); + int (*start_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + void (*stop_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + u64 (*prepare_multicast)(struct ieee80211_hw *hw, struct netdev_hw_addr_list *mc_list); void (*configure_filter)(struct ieee80211_hw *hw, -- cgit v1.2.3 From c8442118ad9cd05cfe3b993f058e70ab25b1009a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 24 Oct 2012 10:17:18 +0200 Subject: cfg80211: allow per interface TX power setting The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 10 +++++++--- include/uapi/linux/nl80211.h | 2 ++ 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c6964572890f..8034a4268fcb 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1551,7 +1551,10 @@ struct cfg80211_gtk_rekey_data { * struct wiphy. If returning an error, no value should be changed. * * @set_tx_power: set the transmit power according to the parameters, - * the power passed is in mBm, to get dBm use MBM_TO_DBM(). + * the power passed is in mBm, to get dBm use MBM_TO_DBM(). The + * wdev may be %NULL if power was set for the wiphy, and will + * always be %NULL unless the driver supports per-vif TX power + * (as advertised by the nl80211 feature flag.) * @get_tx_power: store the current TX power into the dbm variable; * return 0 if successful * @@ -1748,9 +1751,10 @@ struct cfg80211_ops { int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); - int (*set_tx_power)(struct wiphy *wiphy, + int (*set_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, enum nl80211_tx_power_setting type, int mbm); - int (*get_tx_power)(struct wiphy *wiphy, int *dbm); + int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, + int *dbm); int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, const u8 *addr); diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 617d0fbfc96f..4c5f6748ed7d 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3051,6 +3051,7 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif + * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3062,6 +3063,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, NL80211_FEATURE_SCAN_FLUSH = 1 << 7, NL80211_FEATURE_AP_SCAN = 1 << 8, + NL80211_FEATURE_VIF_TXPOWER = 1 << 9, }; /** -- cgit v1.2.3 From 1ea6f9c0d48b11b6ec3ec4b5579ec74fc3951cf8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 24 Oct 2012 10:59:25 +0200 Subject: mac80211: handle TX power per virtual interface Even before channel contexts/multi-channel, having a single global TX power limit was already problematic, in particular if two managed interfaces connected to two APs with different power constraints. The channel context introduction completely broke this though and in fact I had disabled TX power configuration there for drivers using channel contexts. Change everything to track TX power per interface so that different user settings and different channel maxima are treated correctly. Also continue tracking the global TX power though for compatibility with applications that attempt to configure the wiphy's TX power globally. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 5f5327452c9a..dfa589b721b6 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -207,6 +207,7 @@ struct ieee80211_chanctx_conf { * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode) * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode) * @BSS_CHANGED_PS: PS changed for this BSS (STA mode) + * @BSS_CHANGED_TXPOWER: TX power setting changed for this interface */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -227,6 +228,7 @@ enum ieee80211_bss_change { BSS_CHANGED_SSID = 1<<15, BSS_CHANGED_AP_PROBE_RESP = 1<<16, BSS_CHANGED_PS = 1<<17, + BSS_CHANGED_TXPOWER = 1<<18, /* when adding here, make sure to change ieee80211_reconfig */ }; @@ -309,6 +311,7 @@ enum ieee80211_rssi_event { * @ssid: The SSID of the current vif. Only valid in AP-mode. * @ssid_len: Length of SSID given in @ssid. * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode. + * @txpower: TX power in dBm */ struct ieee80211_bss_conf { const u8 *bssid; @@ -341,6 +344,7 @@ struct ieee80211_bss_conf { u8 ssid[IEEE80211_MAX_SSID_LEN]; size_t ssid_len; bool hidden_ssid; + int txpower; }; /** @@ -884,7 +888,8 @@ enum ieee80211_smps_mode { * powersave documentation below. This variable is valid only when * the CONF_PS flag is set. * - * @power_level: requested transmit power (in dBm) + * @power_level: requested transmit power (in dBm), backward compatibility + * value only that is set to the minimum of all interfaces * * @channel: the channel to tune to * @channel_type: the channel (HT) type -- cgit v1.2.3 From ba350fbc53b5798104b3fc245bb3c3461a4ef8dc Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 5 Nov 2012 15:29:09 +0100 Subject: wireless: add peer-to-peer related definitions The Peer-to-Peer IE is vendor-specific IE identified by WiFi Alliance OUI and specific P2P OUI type. The payload of this IE consists of so-called P2P attributes. This patch adds definitions for processing these attributes. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky (Zhenhui) Lin Signed-off-by: Arend van Spriel Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 85764a900731..4530d4960953 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -905,6 +905,38 @@ struct ieee80211_tdls_data { } u; } __packed; +/* + * Peer-to-Peer IE attribute related definitions. + */ +/** + * enum ieee80211_p2p_attr_id - identifies type of peer-to-peer attribute. + */ +enum ieee80211_p2p_attr_id { + IEEE80211_P2P_ATTR_STATUS = 0, + IEEE80211_P2P_ATTR_MINOR_REASON, + IEEE80211_P2P_ATTR_CAPABILITY, + IEEE80211_P2P_ATTR_DEVICE_ID, + IEEE80211_P2P_ATTR_GO_INTENT, + IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT, + IEEE80211_P2P_ATTR_LISTEN_CHANNEL, + IEEE80211_P2P_ATTR_GROUP_BSSID, + IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING, + IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR, + IEEE80211_P2P_ATTR_MANAGABILITY, + IEEE80211_P2P_ATTR_CHANNEL_LIST, + IEEE80211_P2P_ATTR_ABSENCE_NOTICE, + IEEE80211_P2P_ATTR_DEVICE_INFO, + IEEE80211_P2P_ATTR_GROUP_INFO, + IEEE80211_P2P_ATTR_GROUP_ID, + IEEE80211_P2P_ATTR_INTERFACE, + IEEE80211_P2P_ATTR_OPER_CHANNEL, + IEEE80211_P2P_ATTR_INVITE_FLAGS, + /* 19 - 220: Reserved */ + IEEE80211_P2P_ATTR_VENDOR_SPECIFIC = 221, + + IEEE80211_P2P_ATTR_MAX +}; + /** * struct ieee80211_bar - HT Block Ack Request * -- cgit v1.2.3 From f4e583c8935c6f52f9385ee7cfbea8f65c66a737 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Fri, 2 Nov 2012 13:27:48 +0100 Subject: nl/cfg80211: add the NL80211_CMD_SET_MCAST_RATE command This command triggers a new callback: set_mcast_rate(). It enables the user to change the rate used to send multicast frames for vif configured as IBSS or MESH_POINT Signed-off-by: Antonio Quartulli Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 6 ++++++ include/uapi/linux/nl80211.h | 5 +++++ 2 files changed, 11 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8034a4268fcb..cee791fd4cff 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1545,6 +1545,9 @@ struct cfg80211_gtk_rekey_data { * to a merge. * @leave_ibss: Leave the IBSS. * + * @set_mcast_rate: Set the specified multicast rate (only if vif is in ADHOC or + * MESH mode) + * * @set_wiphy_params: Notify that wiphy parameters have changed; * @changed bitfield (see &enum wiphy_params_flags) describes which values * have changed. The actual parameter values are available in @@ -1749,6 +1752,9 @@ struct cfg80211_ops { struct cfg80211_ibss_params *params); int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); + int (*set_mcast_rate)(struct wiphy *wiphy, struct net_device *dev, + int rate[IEEE80211_NUM_BANDS]); + int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); int (*set_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 4c5f6748ed7d..cbd2d6bb907a 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -578,6 +578,9 @@ * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON * is used for this. * + * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames + * for IBSS or MESH vif. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -726,6 +729,8 @@ enum nl80211_commands { NL80211_CMD_CONN_FAILED, + NL80211_CMD_SET_MCAST_RATE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -- cgit v1.2.3 From 37c73b5f323c973c1db6857494a6685260440be1 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Fri, 26 Oct 2012 14:49:25 -0700 Subject: cfg80211: allow registering more than one beacon listener The commit: commit 5e760230e42cf759bd923457ca2753aacf2e656e Author: Johannes Berg Date: Fri Nov 4 11:18:17 2011 +0100 cfg80211: allow registering to beacons allowed only a single process to register for beacon events per wiphy. This breaks cases where a user may want two or more VIFs on a wiphy and run a seperate hostapd process on each vif. This patch allows multiple beacon listeners, fixing the regression. Signed-off-by: Ben Greear Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index cee791fd4cff..10c9fc68d1af 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3560,7 +3560,6 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, * @len: length of the frame * @freq: frequency the frame was received on * @sig_dbm: signal strength in mBm, or 0 if unknown - * @gfp: allocation flags * * Use this function to report to userspace when a beacon was * received. It is not useful to call this when there is no @@ -3568,7 +3567,7 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, */ void cfg80211_report_obss_beacon(struct wiphy *wiphy, const u8 *frame, size_t len, - int freq, int sig_dbm, gfp_t gfp); + int freq, int sig_dbm); /** * cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used -- cgit v1.2.3 From 0ee453552f0b1ea87f6f50a077b0ed9d9ac7d6ac Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Oct 2012 19:48:40 +0100 Subject: wireless: add utility function to get P2P attribute Parsing the P2P attributes can be tricky as their contents can be split across multiple (vendor) IEs. Thus, it's not possible to parse them like IEs (by returning a pointer to the data.) Instead, provide a function that copies the attribute data into a caller-provided buffer and returns the size needed (useful in case the buffer was too small.) Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 10c9fc68d1af..81d725038f97 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3617,6 +3617,25 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate); */ void cfg80211_unregister_wdev(struct wireless_dev *wdev); +/** + * cfg80211_get_p2p_attr - find and copy a P2P attribute from IE buffer + * @ies: the input IE buffer + * @len: the input length + * @attr: the attribute ID to find + * @buf: output buffer, can be %NULL if the data isn't needed, e.g. + * if the function is only called to get the needed buffer size + * @bufsize: size of the output buffer + * + * The function finds a given P2P attribute in the (vendor) IEs and + * copies its contents to the given buffer. + * + * The return value is a negative error code (-%EILSEQ or -%ENOENT) if + * the data is malformed or the attribute can't be found (respectively), + * or the length of the found attribute (which can be zero). + */ +unsigned int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, + u8 attr, u8 *buf, unsigned int bufsize); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ -- cgit v1.2.3 From 488dd7b53de9ea41edf7a475be63da51bdd05093 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Oct 2012 20:08:01 +0100 Subject: mac80211: pass P2P powersave parameters to driver While connected to a GO, parse the P2P NoA attribute and pass the CT Window and opportunistic powersave parameters to the driver. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index dfa589b721b6..23803addca3c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -208,6 +208,8 @@ struct ieee80211_chanctx_conf { * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode) * @BSS_CHANGED_PS: PS changed for this BSS (STA mode) * @BSS_CHANGED_TXPOWER: TX power setting changed for this interface + * @BSS_CHANGED_P2P_PS: P2P powersave settings (CTWindow, opportunistic PS) + * changed (currently only in P2P client mode, GO mode will be later) */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -229,6 +231,7 @@ enum ieee80211_bss_change { BSS_CHANGED_AP_PROBE_RESP = 1<<16, BSS_CHANGED_PS = 1<<17, BSS_CHANGED_TXPOWER = 1<<18, + BSS_CHANGED_P2P_PS = 1<<19, /* when adding here, make sure to change ieee80211_reconfig */ }; @@ -312,6 +315,8 @@ enum ieee80211_rssi_event { * @ssid_len: Length of SSID given in @ssid. * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode. * @txpower: TX power in dBm + * @p2p_ctwindow: P2P CTWindow, only for P2P client interfaces + * @p2p_oppps: P2P opportunistic PS is enabled */ struct ieee80211_bss_conf { const u8 *bssid; @@ -345,6 +350,8 @@ struct ieee80211_bss_conf { size_t ssid_len; bool hidden_ssid; int txpower; + u8 p2p_ctwindow; + bool p2p_oppps; }; /** -- cgit v1.2.3 From 9214ad7f9a0bfbfb2c204305e7391ce8b7fe4d29 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 6 Nov 2012 19:18:13 +0100 Subject: mac80211: call driver method when restart completes When the driver requests a restart (reconfiguration) it gets all the normal method calls, but can't really tell why they're happening. Call a new restart_complete op in the driver when the restart completes, so it could keep its own state about the restart and clear it there. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 23803addca3c..e1d830992319 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2400,6 +2400,10 @@ enum ieee80211_rate_control_changed { * just "paused" for scanning/ROC, which is indicated by the beacon being * disabled/enabled via @bss_info_changed. * @stop_ap: Stop operation on the AP interface. + * + * @restart_complete: Called after a call to ieee80211_restart_hw(), when the + * reconfiguration has completed. This can help the driver implement the + * reconfiguration step. This callback may sleep. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2561,6 +2565,8 @@ struct ieee80211_ops { void (*unassign_vif_chanctx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_chanctx_conf *ctx); + + void (*restart_complete)(struct ieee80211_hw *hw); }; /** -- cgit v1.2.3 From 8b2c98243e8d00f9c6b6059976d6de51491ee0c7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 6 Nov 2012 20:23:30 +0100 Subject: mac80211: clarify interface iteration and make it configurable During hardware restart, all interfaces are iterated even though they haven't been re-added to the driver, document this behaviour. The same also happens during resume, which is even more confusing since all of the interfaces were previously removed from the driver. Make this optional so drivers relying on the current behaviour can still use it, but to let drivers that don't want this behaviour disable it. Also convert all API users, keeping the old semantics except in hwsim, where the new normal ones are desired. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index e1d830992319..a789dd1d4c10 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3412,6 +3412,21 @@ void ieee80211_sched_scan_results(struct ieee80211_hw *hw); */ void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw); +/** + * enum ieee80211_interface_iteration_flags - interface iteration flags + * @IEEE80211_IFACE_ITER_NORMAL: Iterate over all interfaces that have + * been added to the driver; However, note that during hardware + * reconfiguration (after restart_hw) it will iterate over a new + * interface and over all the existing interfaces even if they + * haven't been re-added to the driver yet. + * @IEEE80211_IFACE_ITER_RESUME_ALL: During resume, iterate over all + * interfaces, even if they haven't been re-added to the driver yet. + */ +enum ieee80211_interface_iteration_flags { + IEEE80211_IFACE_ITER_NORMAL = 0, + IEEE80211_IFACE_ITER_RESUME_ALL = BIT(0), +}; + /** * ieee80211_iterate_active_interfaces - iterate active interfaces * @@ -3420,13 +3435,15 @@ void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw); * This function allows the iterator function to sleep, when the iterator * function is atomic @ieee80211_iterate_active_interfaces_atomic can * be used. - * Does not iterate over a new interface during add_interface() + * Does not iterate over a new interface during add_interface(). * * @hw: the hardware struct of which the interfaces should be iterated over + * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags * @iterator: the iterator function to call * @data: first argument of the iterator function */ void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw, + u32 iter_flags, void (*iterator)(void *data, u8 *mac, struct ieee80211_vif *vif), void *data); @@ -3438,13 +3455,15 @@ void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw, * hardware that are currently active and calls the callback for them. * This function requires the iterator callback function to be atomic, * if that is not desired, use @ieee80211_iterate_active_interfaces instead. - * Does not iterate over a new interface during add_interface() + * Does not iterate over a new interface during add_interface(). * * @hw: the hardware struct of which the interfaces should be iterated over + * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags * @iterator: the iterator function to call, cannot sleep * @data: first argument of the iterator function */ void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw, + u32 iter_flags, void (*iterator)(void *data, u8 *mac, struct ieee80211_vif *vif), -- cgit v1.2.3