From 2fb04fdf30192ff1e2b5834e9b7745889ea8bbcb Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 27 Aug 2016 17:33:03 +0100 Subject: net: smc91x: fix SMC accesses Commit b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: Russell King Tested-by: Robert Jarzmik Signed-off-by: David S. Miller --- include/linux/smc91x.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index 76199b75d584..e302c447e057 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -1,6 +1,16 @@ #ifndef __SMC91X_H__ #define __SMC91X_H__ +/* + * These bits define which access sizes a platform can support, rather + * than the maximal access size. So, if your platform can do 16-bit + * and 32-bit accesses to the SMC91x device, but not 8-bit, set both + * SMC91X_USE_16BIT and SMC91X_USE_32BIT. + * + * The SMC91x driver requires at least one of SMC91X_USE_8BIT or + * SMC91X_USE_16BIT to be supported - just setting SMC91X_USE_32BIT is + * an invalid configuration. + */ #define SMC91X_USE_8BIT (1 << 0) #define SMC91X_USE_16BIT (1 << 1) #define SMC91X_USE_32BIT (1 << 2) -- cgit v1.2.3