From 5f320f09b3d93200eb61eb9a26e1d2b3078eb712 Mon Sep 17 00:00:00 2001 From: Martin Weinelt Date: Wed, 6 Feb 2019 15:39:14 +0100 Subject: batman-adv: fix memory leak in in batadv_dat_put_dhcp batadv_dat_put_dhcp is creating a new ARP packet via batadv_dat_arp_create_reply and tries to forward it via batadv_dat_send_data to different peers in the DHT. The original skb is not consumed by batadv_dat_send_data and thus has to be consumed by the caller. Fixes: b61ec31c8575 ("batman-adv: Snoop DHCPACKs for DAT") Signed-off-by: Martin Weinelt [sven@narfation.org: add commit message] Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/distributed-arp-table.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index 899ab051ffce..310a4f353008 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -1711,6 +1711,8 @@ static void batadv_dat_put_dhcp(struct batadv_priv *bat_priv, u8 *chaddr, batadv_dat_send_data(bat_priv, skb, yiaddr, vid, BATADV_P_DAT_DHT_PUT); batadv_dat_send_data(bat_priv, skb, ip_dst, vid, BATADV_P_DAT_DHT_PUT); + consume_skb(skb); + batadv_dbg(BATADV_DBG_DAT, bat_priv, "Snooped from outgoing DHCPACK (server address): %pI4, %pM (vid: %i)\n", &ip_dst, hw_dst, batadv_print_vid(vid)); -- cgit v1.2.3 From c4a7a8d9bb8f9e712d0e4c90c3d11b4388b621ba Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 12:00:28 +0100 Subject: batman-adv: Move common genl doit code pre/post hooks The commit ff4c92d85c6f ("genetlink: introduce pre_doit/post_doit hooks") intoduced a mechanism to run specific code for doit hooks before/after the hooks are run. Since all doit hooks are requiring the batadv softif, it should be retrieved/freed in these helpers to simplify the code. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 143 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 100 insertions(+), 43 deletions(-) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 5fe833cc9507..e56c40d1bfe0 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -20,8 +20,10 @@ #include "main.h" #include +#include #include #include +#include #include #include #include @@ -54,6 +56,8 @@ #include "tp_meter.h" #include "translation-table.h" +struct net; + struct genl_family batadv_netlink_family; /* multicast groups */ @@ -61,6 +65,18 @@ enum batadv_netlink_multicast_groups { BATADV_NL_MCGRP_TPMETER, }; +/** + * enum batadv_genl_ops_flags - flags for genl_ops's internal_flags + */ +enum batadv_genl_ops_flags { + /** + * @BATADV_FLAG_NEED_MESH: request requires valid soft interface in + * attribute BATADV_ATTR_MESH_IFINDEX and expects a pointer to it to be + * saved in info->user_ptr[0] + */ + BATADV_FLAG_NEED_MESH = BIT(0), +}; + static const struct genl_multicast_group batadv_netlink_mcgrps[] = { [BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER }, }; @@ -329,40 +345,24 @@ err_genlmsg: static int batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info) { - struct net *net = genl_info_net(info); - struct net_device *soft_iface; - struct batadv_priv *bat_priv; + struct batadv_priv *bat_priv = info->user_ptr[0]; struct sk_buff *msg = NULL; u32 test_length; void *msg_head; - int ifindex; u32 cookie; u8 *dst; int ret; - if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) - return -EINVAL; - if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS]) return -EINVAL; if (!info->attrs[BATADV_ATTR_TPMETER_TEST_TIME]) return -EINVAL; - ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); - if (!ifindex) - return -EINVAL; - dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]); test_length = nla_get_u32(info->attrs[BATADV_ATTR_TPMETER_TEST_TIME]); - soft_iface = dev_get_by_index(net, ifindex); - if (!soft_iface || !batadv_softif_is_valid(soft_iface)) { - ret = -ENODEV; - goto out; - } - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); if (!msg) { ret = -ENOMEM; @@ -377,15 +377,11 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info) goto out; } - bat_priv = netdev_priv(soft_iface); batadv_tp_start(bat_priv, dst, test_length, &cookie); ret = batadv_netlink_tp_meter_put(msg, cookie); out: - if (soft_iface) - dev_put(soft_iface); - if (ret) { if (msg) nlmsg_free(msg); @@ -406,38 +402,17 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info) static int batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info) { - struct net *net = genl_info_net(info); - struct net_device *soft_iface; - struct batadv_priv *bat_priv; - int ifindex; + struct batadv_priv *bat_priv = info->user_ptr[0]; u8 *dst; int ret = 0; - if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) - return -EINVAL; - if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS]) return -EINVAL; - ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); - if (!ifindex) - return -EINVAL; - dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]); - soft_iface = dev_get_by_index(net, ifindex); - if (!soft_iface || !batadv_softif_is_valid(soft_iface)) { - ret = -ENODEV; - goto out; - } - - bat_priv = netdev_priv(soft_iface); batadv_tp_stop(bat_priv, dst, BATADV_TP_REASON_CANCEL); -out: - if (soft_iface) - dev_put(soft_iface); - return ret; } @@ -545,6 +520,84 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) return msg->len; } +/** + * batadv_get_softif_from_info() - Retrieve soft interface from genl attributes + * @net: the applicable net namespace + * @info: receiver information + * + * Return: Pointer to soft interface (with increased refcnt) on success, error + * pointer on error + */ +static struct net_device * +batadv_get_softif_from_info(struct net *net, struct genl_info *info) +{ + struct net_device *soft_iface; + int ifindex; + + if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) + return ERR_PTR(-EINVAL); + + ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); + + soft_iface = dev_get_by_index(net, ifindex); + if (!soft_iface) + return ERR_PTR(-ENODEV); + + if (!batadv_softif_is_valid(soft_iface)) + goto err_put_softif; + + return soft_iface; + +err_put_softif: + dev_put(soft_iface); + + return ERR_PTR(-EINVAL); +} + +/** + * batadv_pre_doit() - Prepare batman-adv genl doit request + * @ops: requested netlink operation + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, + struct genl_info *info) +{ + struct net *net = genl_info_net(info); + struct net_device *soft_iface; + struct batadv_priv *bat_priv; + + if (ops->internal_flags & BATADV_FLAG_NEED_MESH) { + soft_iface = batadv_get_softif_from_info(net, info); + if (IS_ERR(soft_iface)) + return PTR_ERR(soft_iface); + + bat_priv = netdev_priv(soft_iface); + info->user_ptr[0] = bat_priv; + } + + return 0; +} + +/** + * batadv_post_doit() - End batman-adv genl doit request + * @ops: requested netlink operation + * @skb: Netlink message with request data + * @info: receiver information + */ +static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, + struct genl_info *info) +{ + struct batadv_priv *bat_priv; + + if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) { + bat_priv = info->user_ptr[0]; + dev_put(bat_priv->soft_iface); + } +} + static const struct genl_ops batadv_netlink_ops[] = { { .cmd = BATADV_CMD_GET_MESH_INFO, @@ -557,12 +610,14 @@ static const struct genl_ops batadv_netlink_ops[] = { .flags = GENL_ADMIN_PERM, .policy = batadv_netlink_policy, .doit = batadv_netlink_tp_meter_start, + .internal_flags = BATADV_FLAG_NEED_MESH, }, { .cmd = BATADV_CMD_TP_METER_CANCEL, .flags = GENL_ADMIN_PERM, .policy = batadv_netlink_policy, .doit = batadv_netlink_tp_meter_cancel, + .internal_flags = BATADV_FLAG_NEED_MESH, }, { .cmd = BATADV_CMD_GET_ROUTING_ALGOS, @@ -639,6 +694,8 @@ struct genl_family batadv_netlink_family __ro_after_init = { .version = 1, .maxattr = BATADV_ATTR_MAX, .netnsok = true, + .pre_doit = batadv_pre_doit, + .post_doit = batadv_post_doit, .module = THIS_MODULE, .ops = batadv_netlink_ops, .n_ops = ARRAY_SIZE(batadv_netlink_ops), -- cgit v1.2.3 From 60040513536097584c3d55b39acdfa7080645d80 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 12:14:56 +0100 Subject: batman-adv: Prepare framework for mesh genl config The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. The main objects for this configuration is the mesh/soft-interface object. Its actual object in memory already contains most of the available configuration settings. The genl interface reflects this by allowing to get/set it using the mesh specific commands. The BATADV_CMD_GET_MESH_INFO (or short version BATADV_CMD_GET_MESH) is reused as get command because it already provides the content of other information from the mesh/soft-interface which are not yet configuration specific. The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_MESH command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 160 +++++++++++++++++++++++++++++------------------ 1 file changed, 98 insertions(+), 62 deletions(-) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index e56c40d1bfe0..179cc7cfcb70 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -62,6 +62,7 @@ struct genl_family batadv_netlink_family; /* multicast groups */ enum batadv_netlink_multicast_groups { + BATADV_NL_MCGRP_CONFIG, BATADV_NL_MCGRP_TPMETER, }; @@ -78,6 +79,7 @@ enum batadv_genl_ops_flags { }; static const struct genl_multicast_group batadv_netlink_mcgrps[] = { + [BATADV_NL_MCGRP_CONFIG] = { .name = BATADV_NL_MCAST_GROUP_CONFIG }, [BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER }, }; @@ -138,20 +140,29 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype) } /** - * batadv_netlink_mesh_info_put() - fill in generic information about mesh - * interface - * @msg: netlink message to be sent back - * @soft_iface: interface for which the data should be taken + * batadv_netlink_mesh_fill() - Fill message with mesh attributes + * @msg: Netlink message to dump into + * @bat_priv: the bat priv with all the soft interface information + * @cmd: type of message to generate + * @portid: Port making netlink request + * @seq: sequence number for message + * @flags: Additional flags for message * - * Return: 0 on success, < 0 on error + * Return: 0 on success or negative error number in case of failure */ -static int -batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface) +static int batadv_netlink_mesh_fill(struct sk_buff *msg, + struct batadv_priv *bat_priv, + enum batadv_nl_commands cmd, + u32 portid, u32 seq, int flags) { - struct batadv_priv *bat_priv = netdev_priv(soft_iface); + struct net_device *soft_iface = bat_priv->soft_iface; struct batadv_hard_iface *primary_if = NULL; struct net_device *hard_iface; - int ret = -ENOBUFS; + void *hdr; + + hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd); + if (!hdr) + return -ENOBUFS; if (nla_put_string(msg, BATADV_ATTR_VERSION, BATADV_SOURCE_VERSION) || nla_put_string(msg, BATADV_ATTR_ALGO_NAME, @@ -162,16 +173,16 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface) soft_iface->dev_addr) || nla_put_u8(msg, BATADV_ATTR_TT_TTVN, (u8)atomic_read(&bat_priv->tt.vn))) - goto out; + goto nla_put_failure; #ifdef CONFIG_BATMAN_ADV_BLA if (nla_put_u16(msg, BATADV_ATTR_BLA_CRC, ntohs(bat_priv->bla.claim_dest.group))) - goto out; + goto nla_put_failure; #endif if (batadv_mcast_mesh_info_put(msg, bat_priv)) - goto out; + goto nla_put_failure; primary_if = batadv_primary_if_get_selected(bat_priv); if (primary_if && primary_if->if_status == BATADV_IF_ACTIVE) { @@ -183,77 +194,95 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface) hard_iface->name) || nla_put(msg, BATADV_ATTR_HARD_ADDRESS, ETH_ALEN, hard_iface->dev_addr)) - goto out; + goto nla_put_failure; } - ret = 0; + if (primary_if) + batadv_hardif_put(primary_if); - out: + genlmsg_end(msg, hdr); + return 0; + +nla_put_failure: if (primary_if) batadv_hardif_put(primary_if); - return ret; + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; } /** - * batadv_netlink_get_mesh_info() - handle incoming BATADV_CMD_GET_MESH_INFO - * netlink request - * @skb: received netlink message - * @info: receiver information + * batadv_netlink_notify_mesh() - send softif attributes to listener + * @bat_priv: the bat priv with all the soft interface information * * Return: 0 on success, < 0 on error */ -static int -batadv_netlink_get_mesh_info(struct sk_buff *skb, struct genl_info *info) +static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv) { - struct net *net = genl_info_net(info); - struct net_device *soft_iface; - struct sk_buff *msg = NULL; - void *msg_head; - int ifindex; + struct sk_buff *msg; int ret; - if (!info->attrs[BATADV_ATTR_MESH_IFINDEX]) - return -EINVAL; - - ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]); - if (!ifindex) - return -EINVAL; + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; - soft_iface = dev_get_by_index(net, ifindex); - if (!soft_iface || !batadv_softif_is_valid(soft_iface)) { - ret = -ENODEV; - goto out; + ret = batadv_netlink_mesh_fill(msg, bat_priv, BATADV_CMD_SET_MESH, + 0, 0, 0); + if (ret < 0) { + nlmsg_free(msg); + return ret; } - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); - if (!msg) { - ret = -ENOMEM; - goto out; - } + genlmsg_multicast_netns(&batadv_netlink_family, + dev_net(bat_priv->soft_iface), msg, 0, + BATADV_NL_MCGRP_CONFIG, GFP_KERNEL); - msg_head = genlmsg_put(msg, info->snd_portid, info->snd_seq, - &batadv_netlink_family, 0, - BATADV_CMD_GET_MESH_INFO); - if (!msg_head) { - ret = -ENOBUFS; - goto out; - } + return 0; +} - ret = batadv_netlink_mesh_info_put(msg, soft_iface); +/** + * batadv_netlink_get_mesh() - Get softif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info) +{ + struct batadv_priv *bat_priv = info->user_ptr[0]; + struct sk_buff *msg; + int ret; - out: - if (soft_iface) - dev_put(soft_iface); + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; - if (ret) { - if (msg) - nlmsg_free(msg); + ret = batadv_netlink_mesh_fill(msg, bat_priv, BATADV_CMD_GET_MESH, + info->snd_portid, info->snd_seq, 0); + if (ret < 0) { + nlmsg_free(msg); return ret; } - genlmsg_end(msg, msg_head); - return genlmsg_reply(msg, info); + ret = genlmsg_reply(msg, info); + + return ret; +} + +/** + * batadv_netlink_set_mesh() - Set softif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) +{ + struct batadv_priv *bat_priv = info->user_ptr[0]; + + batadv_netlink_notify_mesh(bat_priv); + + return 0; } /** @@ -600,10 +629,11 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, static const struct genl_ops batadv_netlink_ops[] = { { - .cmd = BATADV_CMD_GET_MESH_INFO, - .flags = GENL_ADMIN_PERM, + .cmd = BATADV_CMD_GET_MESH, + /* can be retrieved by unprivileged users */ .policy = batadv_netlink_policy, - .doit = batadv_netlink_get_mesh_info, + .doit = batadv_netlink_get_mesh, + .internal_flags = BATADV_FLAG_NEED_MESH, }, { .cmd = BATADV_CMD_TP_METER, @@ -685,7 +715,13 @@ static const struct genl_ops batadv_netlink_ops[] = { .policy = batadv_netlink_policy, .dumpit = batadv_mcast_flags_dump, }, - + { + .cmd = BATADV_CMD_SET_MESH, + .flags = GENL_ADMIN_PERM, + .policy = batadv_netlink_policy, + .doit = batadv_netlink_set_mesh, + .internal_flags = BATADV_FLAG_NEED_MESH, + }, }; struct genl_family batadv_netlink_family __ro_after_init = { -- cgit v1.2.3 From 5c55a40fa801df2d807141319c0fdbb3939c3947 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 12:33:17 +0100 Subject: batman-adv: Prepare framework for hardif genl config The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. Beside the mesh/soft-interface specific configuration, the slave/hard-interface have B.A.T.M.A.N. V specific configuration settings. The genl interface reflects this by allowing to get/set it using the hard-interface specific commands. The BATADV_CMD_GET_HARDIFS (or short version BATADV_CMD_GET_HARDIF) is reused as get command because it already allow sto dump the content of other information from the slave/hard-interface which are not yet configuration specific. The set command BATADV_CMD_SET_HARDIF will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_HARDIF command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 240 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 219 insertions(+), 21 deletions(-) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 179cc7cfcb70..a184e4225fb5 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include @@ -76,6 +77,13 @@ enum batadv_genl_ops_flags { * saved in info->user_ptr[0] */ BATADV_FLAG_NEED_MESH = BIT(0), + + /** + * @BATADV_FLAG_NEED_HARDIF: request requires valid hard interface in + * attribute BATADV_ATTR_HARD_IFINDEX and expects a pointer to it to be + * saved in info->user_ptr[1] + */ + BATADV_FLAG_NEED_HARDIF = BIT(1), }; static const struct genl_multicast_group batadv_netlink_mcgrps[] = { @@ -446,29 +454,38 @@ batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info) } /** - * batadv_netlink_dump_hardif_entry() - Dump one hard interface into a message + * batadv_netlink_hardif_fill() - Fill message with hardif attributes * @msg: Netlink message to dump into + * @bat_priv: the bat priv with all the soft interface information + * @hard_iface: hard interface which was modified + * @cmd: type of message to generate * @portid: Port making netlink request + * @seq: sequence number for message + * @flags: Additional flags for message * @cb: Control block containing additional options - * @hard_iface: Hard interface to dump * - * Return: error code, or 0 on success + * Return: 0 on success or negative error number in case of failure */ -static int -batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid, - struct netlink_callback *cb, - struct batadv_hard_iface *hard_iface) +static int batadv_netlink_hardif_fill(struct sk_buff *msg, + struct batadv_priv *bat_priv, + struct batadv_hard_iface *hard_iface, + enum batadv_nl_commands cmd, + u32 portid, u32 seq, int flags, + struct netlink_callback *cb) { struct net_device *net_dev = hard_iface->net_dev; void *hdr; - hdr = genlmsg_put(msg, portid, cb->nlh->nlmsg_seq, - &batadv_netlink_family, NLM_F_MULTI, - BATADV_CMD_GET_HARDIFS); + hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd); if (!hdr) - return -EMSGSIZE; + return -ENOBUFS; + + if (cb) + genl_dump_check_consistent(cb, hdr); - genl_dump_check_consistent(cb, hdr); + if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX, + bat_priv->soft_iface->ifindex)) + goto nla_put_failure; if (nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, net_dev->ifindex) || @@ -486,24 +503,107 @@ batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid, genlmsg_end(msg, hdr); return 0; - nla_put_failure: +nla_put_failure: genlmsg_cancel(msg, hdr); return -EMSGSIZE; } /** - * batadv_netlink_dump_hardifs() - Dump all hard interface into a messages + * batadv_netlink_notify_hardif() - send hardif attributes to listener + * @bat_priv: the bat priv with all the soft interface information + * @hard_iface: hard interface which was modified + * + * Return: 0 on success, < 0 on error + */ +static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv, + struct batadv_hard_iface *hard_iface) +{ + struct sk_buff *msg; + int ret; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + ret = batadv_netlink_hardif_fill(msg, bat_priv, hard_iface, + BATADV_CMD_SET_HARDIF, 0, 0, 0, NULL); + if (ret < 0) { + nlmsg_free(msg); + return ret; + } + + genlmsg_multicast_netns(&batadv_netlink_family, + dev_net(bat_priv->soft_iface), msg, 0, + BATADV_NL_MCGRP_CONFIG, GFP_KERNEL); + + return 0; +} + +/** + * batadv_netlink_get_hardif() - Get hardif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_get_hardif(struct sk_buff *skb, + struct genl_info *info) +{ + struct batadv_hard_iface *hard_iface = info->user_ptr[1]; + struct batadv_priv *bat_priv = info->user_ptr[0]; + struct sk_buff *msg; + int ret; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + ret = batadv_netlink_hardif_fill(msg, bat_priv, hard_iface, + BATADV_CMD_GET_HARDIF, + info->snd_portid, info->snd_seq, 0, + NULL); + if (ret < 0) { + nlmsg_free(msg); + return ret; + } + + ret = genlmsg_reply(msg, info); + + return ret; +} + +/** + * batadv_netlink_set_hardif() - Set hardif attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_set_hardif(struct sk_buff *skb, + struct genl_info *info) +{ + struct batadv_hard_iface *hard_iface = info->user_ptr[1]; + struct batadv_priv *bat_priv = info->user_ptr[0]; + + batadv_netlink_notify_hardif(bat_priv, hard_iface); + + return 0; +} + +/** + * batadv_netlink_dump_hardif() - Dump all hard interface into a messages * @msg: Netlink message to dump into * @cb: Parameters from query * * Return: error code, or length of reply message on success */ static int -batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) +batadv_netlink_dump_hardif(struct sk_buff *msg, struct netlink_callback *cb) { struct net *net = sock_net(cb->skb->sk); struct net_device *soft_iface; struct batadv_hard_iface *hard_iface; + struct batadv_priv *bat_priv; int ifindex; int portid = NETLINK_CB(cb->skb).portid; int skip = cb->args[0]; @@ -523,6 +623,8 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) return -ENODEV; } + bat_priv = netdev_priv(soft_iface); + rtnl_lock(); cb->seq = batadv_hardif_generation << 1 | 1; @@ -533,8 +635,10 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb) if (i++ < skip) continue; - if (batadv_netlink_dump_hardif_entry(msg, portid, cb, - hard_iface)) { + if (batadv_netlink_hardif_fill(msg, bat_priv, hard_iface, + BATADV_CMD_GET_HARDIF, + portid, cb->nlh->nlmsg_seq, + NLM_F_MULTI, cb)) { i--; break; } @@ -583,6 +687,52 @@ err_put_softif: return ERR_PTR(-EINVAL); } +/** + * batadv_get_hardif_from_info() - Retrieve hardif from genl attributes + * @bat_priv: the bat priv with all the soft interface information + * @net: the applicable net namespace + * @info: receiver information + * + * Return: Pointer to hard interface (with increased refcnt) on success, error + * pointer on error + */ +static struct batadv_hard_iface * +batadv_get_hardif_from_info(struct batadv_priv *bat_priv, struct net *net, + struct genl_info *info) +{ + struct batadv_hard_iface *hard_iface; + struct net_device *hard_dev; + unsigned int hardif_index; + + if (!info->attrs[BATADV_ATTR_HARD_IFINDEX]) + return ERR_PTR(-EINVAL); + + hardif_index = nla_get_u32(info->attrs[BATADV_ATTR_HARD_IFINDEX]); + + hard_dev = dev_get_by_index(net, hardif_index); + if (!hard_dev) + return ERR_PTR(-ENODEV); + + hard_iface = batadv_hardif_get_by_netdev(hard_dev); + if (!hard_iface) + goto err_put_harddev; + + if (hard_iface->soft_iface != bat_priv->soft_iface) + goto err_put_hardif; + + /* hard_dev is referenced by hard_iface and not needed here */ + dev_put(hard_dev); + + return hard_iface; + +err_put_hardif: + batadv_hardif_put(hard_iface); +err_put_harddev: + dev_put(hard_dev); + + return ERR_PTR(-EINVAL); +} + /** * batadv_pre_doit() - Prepare batman-adv genl doit request * @ops: requested netlink operation @@ -595,8 +745,21 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, struct genl_info *info) { struct net *net = genl_info_net(info); + struct batadv_hard_iface *hard_iface; + struct batadv_priv *bat_priv = NULL; struct net_device *soft_iface; - struct batadv_priv *bat_priv; + u8 user_ptr1_flags; + u8 mesh_dep_flags; + int ret; + + user_ptr1_flags = BATADV_FLAG_NEED_HARDIF; + if (WARN_ON(hweight8(ops->internal_flags & user_ptr1_flags) > 1)) + return -EINVAL; + + mesh_dep_flags = BATADV_FLAG_NEED_HARDIF; + if (WARN_ON((ops->internal_flags & mesh_dep_flags) && + (~ops->internal_flags & BATADV_FLAG_NEED_MESH))) + return -EINVAL; if (ops->internal_flags & BATADV_FLAG_NEED_MESH) { soft_iface = batadv_get_softif_from_info(net, info); @@ -607,7 +770,23 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, info->user_ptr[0] = bat_priv; } + if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF) { + hard_iface = batadv_get_hardif_from_info(bat_priv, net, info); + if (IS_ERR(hard_iface)) { + ret = PTR_ERR(hard_iface); + goto err_put_softif; + } + + info->user_ptr[1] = hard_iface; + } + return 0; + +err_put_softif: + if (bat_priv) + dev_put(bat_priv->soft_iface); + + return ret; } /** @@ -619,8 +798,16 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, struct genl_info *info) { + struct batadv_hard_iface *hard_iface; struct batadv_priv *bat_priv; + if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF && + info->user_ptr[1]) { + hard_iface = info->user_ptr[1]; + + batadv_hardif_put(hard_iface); + } + if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) { bat_priv = info->user_ptr[0]; dev_put(bat_priv->soft_iface); @@ -656,10 +843,13 @@ static const struct genl_ops batadv_netlink_ops[] = { .dumpit = batadv_algo_dump, }, { - .cmd = BATADV_CMD_GET_HARDIFS, - .flags = GENL_ADMIN_PERM, + .cmd = BATADV_CMD_GET_HARDIF, + /* can be retrieved by unprivileged users */ .policy = batadv_netlink_policy, - .dumpit = batadv_netlink_dump_hardifs, + .dumpit = batadv_netlink_dump_hardif, + .doit = batadv_netlink_get_hardif, + .internal_flags = BATADV_FLAG_NEED_MESH | + BATADV_FLAG_NEED_HARDIF, }, { .cmd = BATADV_CMD_GET_TRANSTABLE_LOCAL, @@ -722,6 +912,14 @@ static const struct genl_ops batadv_netlink_ops[] = { .doit = batadv_netlink_set_mesh, .internal_flags = BATADV_FLAG_NEED_MESH, }, + { + .cmd = BATADV_CMD_SET_HARDIF, + .flags = GENL_ADMIN_PERM, + .policy = batadv_netlink_policy, + .doit = batadv_netlink_set_hardif, + .internal_flags = BATADV_FLAG_NEED_MESH | + BATADV_FLAG_NEED_HARDIF, + }, }; struct genl_family batadv_netlink_family __ro_after_init = { -- cgit v1.2.3 From 49e7e37cd98122126e8da58df2fe2261c6e83df2 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 12:41:08 +0100 Subject: batman-adv: Prepare framework for vlan genl config The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. Beside the mesh/soft-interface specific configuration, the VLANs on top of the mesh/soft-interface have configuration settings. The genl interface reflects this by allowing to get/set it using the vlan specific commands BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN. The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_VLAN command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 191 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 189 insertions(+), 2 deletions(-) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index a184e4225fb5..d40913bb9031 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -84,6 +85,13 @@ enum batadv_genl_ops_flags { * saved in info->user_ptr[1] */ BATADV_FLAG_NEED_HARDIF = BIT(1), + + /** + * @BATADV_FLAG_NEED_VLAN: request requires valid vlan in + * attribute BATADV_ATTR_VLANID and expects a pointer to it to be + * saved in info->user_ptr[1] + */ + BATADV_FLAG_NEED_VLAN = BIT(2), }; static const struct genl_multicast_group batadv_netlink_mcgrps[] = { @@ -130,6 +138,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_DAT_CACHE_VID] = { .type = NLA_U16 }, [BATADV_ATTR_MCAST_FLAGS] = { .type = NLA_U32 }, [BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 }, + [BATADV_ATTR_VLANID] = { .type = NLA_U16 }, }; /** @@ -653,6 +662,123 @@ batadv_netlink_dump_hardif(struct sk_buff *msg, struct netlink_callback *cb) return msg->len; } +/** + * batadv_netlink_vlan_fill() - Fill message with vlan attributes + * @msg: Netlink message to dump into + * @bat_priv: the bat priv with all the soft interface information + * @vlan: vlan which was modified + * @cmd: type of message to generate + * @portid: Port making netlink request + * @seq: sequence number for message + * @flags: Additional flags for message + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_vlan_fill(struct sk_buff *msg, + struct batadv_priv *bat_priv, + struct batadv_softif_vlan *vlan, + enum batadv_nl_commands cmd, + u32 portid, u32 seq, int flags) +{ + void *hdr; + + hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd); + if (!hdr) + return -ENOBUFS; + + if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX, + bat_priv->soft_iface->ifindex)) + goto nla_put_failure; + + if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK)) + goto nla_put_failure; + + genlmsg_end(msg, hdr); + return 0; + +nla_put_failure: + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; +} + +/** + * batadv_netlink_notify_vlan() - send vlan attributes to listener + * @bat_priv: the bat priv with all the soft interface information + * @vlan: vlan which was modified + * + * Return: 0 on success, < 0 on error + */ +static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv, + struct batadv_softif_vlan *vlan) +{ + struct sk_buff *msg; + int ret; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + ret = batadv_netlink_vlan_fill(msg, bat_priv, vlan, + BATADV_CMD_SET_VLAN, 0, 0, 0); + if (ret < 0) { + nlmsg_free(msg); + return ret; + } + + genlmsg_multicast_netns(&batadv_netlink_family, + dev_net(bat_priv->soft_iface), msg, 0, + BATADV_NL_MCGRP_CONFIG, GFP_KERNEL); + + return 0; +} + +/** + * batadv_netlink_get_vlan() - Get vlan attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_get_vlan(struct sk_buff *skb, struct genl_info *info) +{ + struct batadv_softif_vlan *vlan = info->user_ptr[1]; + struct batadv_priv *bat_priv = info->user_ptr[0]; + struct sk_buff *msg; + int ret; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + ret = batadv_netlink_vlan_fill(msg, bat_priv, vlan, BATADV_CMD_GET_VLAN, + info->snd_portid, info->snd_seq, 0); + if (ret < 0) { + nlmsg_free(msg); + return ret; + } + + ret = genlmsg_reply(msg, info); + + return ret; +} + +/** + * batadv_netlink_set_vlan() - Get vlan attributes + * @skb: Netlink message with request data + * @info: receiver information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_set_vlan(struct sk_buff *skb, struct genl_info *info) +{ + struct batadv_softif_vlan *vlan = info->user_ptr[1]; + struct batadv_priv *bat_priv = info->user_ptr[0]; + + batadv_netlink_notify_vlan(bat_priv, vlan); + + return 0; +} + /** * batadv_get_softif_from_info() - Retrieve soft interface from genl attributes * @net: the applicable net namespace @@ -733,6 +859,34 @@ err_put_harddev: return ERR_PTR(-EINVAL); } +/** + * batadv_get_vlan_from_info() - Retrieve vlan from genl attributes + * @bat_priv: the bat priv with all the soft interface information + * @net: the applicable net namespace + * @info: receiver information + * + * Return: Pointer to vlan on success (with increased refcnt), error pointer + * on error + */ +static struct batadv_softif_vlan * +batadv_get_vlan_from_info(struct batadv_priv *bat_priv, struct net *net, + struct genl_info *info) +{ + struct batadv_softif_vlan *vlan; + u16 vid; + + if (!info->attrs[BATADV_ATTR_VLANID]) + return ERR_PTR(-EINVAL); + + vid = nla_get_u16(info->attrs[BATADV_ATTR_VLANID]); + + vlan = batadv_softif_vlan_get(bat_priv, vid | BATADV_VLAN_HAS_TAG); + if (!vlan) + return ERR_PTR(-ENOENT); + + return vlan; +} + /** * batadv_pre_doit() - Prepare batman-adv genl doit request * @ops: requested netlink operation @@ -747,16 +901,17 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, struct net *net = genl_info_net(info); struct batadv_hard_iface *hard_iface; struct batadv_priv *bat_priv = NULL; + struct batadv_softif_vlan *vlan; struct net_device *soft_iface; u8 user_ptr1_flags; u8 mesh_dep_flags; int ret; - user_ptr1_flags = BATADV_FLAG_NEED_HARDIF; + user_ptr1_flags = BATADV_FLAG_NEED_HARDIF | BATADV_FLAG_NEED_VLAN; if (WARN_ON(hweight8(ops->internal_flags & user_ptr1_flags) > 1)) return -EINVAL; - mesh_dep_flags = BATADV_FLAG_NEED_HARDIF; + mesh_dep_flags = BATADV_FLAG_NEED_HARDIF | BATADV_FLAG_NEED_VLAN; if (WARN_ON((ops->internal_flags & mesh_dep_flags) && (~ops->internal_flags & BATADV_FLAG_NEED_MESH))) return -EINVAL; @@ -780,6 +935,16 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, info->user_ptr[1] = hard_iface; } + if (ops->internal_flags & BATADV_FLAG_NEED_VLAN) { + vlan = batadv_get_vlan_from_info(bat_priv, net, info); + if (IS_ERR(vlan)) { + ret = PTR_ERR(vlan); + goto err_put_softif; + } + + info->user_ptr[1] = vlan; + } + return 0; err_put_softif: @@ -799,6 +964,7 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, struct genl_info *info) { struct batadv_hard_iface *hard_iface; + struct batadv_softif_vlan *vlan; struct batadv_priv *bat_priv; if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF && @@ -808,6 +974,11 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb, batadv_hardif_put(hard_iface); } + if (ops->internal_flags & BATADV_FLAG_NEED_VLAN && info->user_ptr[1]) { + vlan = info->user_ptr[1]; + batadv_softif_vlan_put(vlan); + } + if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) { bat_priv = info->user_ptr[0]; dev_put(bat_priv->soft_iface); @@ -920,6 +1091,22 @@ static const struct genl_ops batadv_netlink_ops[] = { .internal_flags = BATADV_FLAG_NEED_MESH | BATADV_FLAG_NEED_HARDIF, }, + { + .cmd = BATADV_CMD_GET_VLAN, + /* can be retrieved by unprivileged users */ + .policy = batadv_netlink_policy, + .doit = batadv_netlink_get_vlan, + .internal_flags = BATADV_FLAG_NEED_MESH | + BATADV_FLAG_NEED_VLAN, + }, + { + .cmd = BATADV_CMD_SET_VLAN, + .flags = GENL_ADMIN_PERM, + .policy = batadv_netlink_policy, + .doit = batadv_netlink_set_vlan, + .internal_flags = BATADV_FLAG_NEED_MESH | + BATADV_FLAG_NEED_VLAN, + }, }; struct genl_family batadv_netlink_family __ro_after_init = { -- cgit v1.2.3 From 9ab4cee5ced970019a5d0f3a43cf85671ca7b38f Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 12:46:14 +0100 Subject: batman-adv: Add aggregated_ogms mesh genl configuration The mesh interface can delay OGM messages to aggregate different ogms together in a single OGM packet. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_AGGREGATED_OGMS_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index d40913bb9031..82665dc2eb2b 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -139,6 +139,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_MCAST_FLAGS] = { .type = NLA_U32 }, [BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 }, [BATADV_ATTR_VLANID] = { .type = NLA_U16 }, + [BATADV_ATTR_AGGREGATED_OGMS_ENABLED] = { .type = NLA_U8 }, }; /** @@ -214,6 +215,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; } + if (nla_put_u8(msg, BATADV_ATTR_AGGREGATED_OGMS_ENABLED, + !!atomic_read(&bat_priv->aggregated_ogms))) + goto nla_put_failure; + if (primary_if) batadv_hardif_put(primary_if); @@ -296,6 +301,13 @@ static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info) static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) { struct batadv_priv *bat_priv = info->user_ptr[0]; + struct nlattr *attr; + + if (info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]) { + attr = info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]; + + atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr)); + } batadv_netlink_notify_mesh(bat_priv); -- cgit v1.2.3 From e43d16b87dc2cad18799cfd1142f4acae4135ea4 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 12:51:55 +0100 Subject: batman-adv: Add ap_isolation mesh/vlan genl configuration The mesh interface can drop messages between clients to implement a mesh-wide AP isolation. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH and BATADV_CMD_SET_VLAN/BATADV_CMD_GET_VLAN commands allow to set/get the configuration of this feature using the BATADV_ATTR_AP_ISOLATION_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. This feature also requires that skbuff which should be handled as isolated are marked. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the mark/mask using the u32 attributes BATADV_ATTR_ISOLATION_MARK and BATADV_ATTR_ISOLATION_MASK. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 82665dc2eb2b..fc80f003ed6e 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -140,6 +140,9 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 }, [BATADV_ATTR_VLANID] = { .type = NLA_U16 }, [BATADV_ATTR_AGGREGATED_OGMS_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_AP_ISOLATION_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 }, + [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, }; /** @@ -157,6 +160,52 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype) return attr ? nla_get_u32(attr) : 0; } +/** + * batadv_netlink_mesh_fill_ap_isolation() - Add ap_isolation softif attribute + * @msg: Netlink message to dump into + * @bat_priv: the bat priv with all the soft interface information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_mesh_fill_ap_isolation(struct sk_buff *msg, + struct batadv_priv *bat_priv) +{ + struct batadv_softif_vlan *vlan; + u8 ap_isolation; + + vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS); + if (!vlan) + return 0; + + ap_isolation = atomic_read(&vlan->ap_isolation); + batadv_softif_vlan_put(vlan); + + return nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION_ENABLED, + !!ap_isolation); +} + +/** + * batadv_option_set_ap_isolation() - Set ap_isolation from genl msg + * @attr: parsed BATADV_ATTR_AP_ISOLATION_ENABLED attribute + * @bat_priv: the bat priv with all the soft interface information + * + * Return: 0 on success or negative error number in case of failure + */ +static int batadv_netlink_set_mesh_ap_isolation(struct nlattr *attr, + struct batadv_priv *bat_priv) +{ + struct batadv_softif_vlan *vlan; + + vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS); + if (!vlan) + return -ENOENT; + + atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr)); + batadv_softif_vlan_put(vlan); + + return 0; +} + /** * batadv_netlink_mesh_fill() - Fill message with mesh attributes * @msg: Netlink message to dump into @@ -219,6 +268,17 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, !!atomic_read(&bat_priv->aggregated_ogms))) goto nla_put_failure; + if (batadv_netlink_mesh_fill_ap_isolation(msg, bat_priv)) + goto nla_put_failure; + + if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MARK, + bat_priv->isolation_mark)) + goto nla_put_failure; + + if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MASK, + bat_priv->isolation_mark_mask)) + goto nla_put_failure; + if (primary_if) batadv_hardif_put(primary_if); @@ -309,6 +369,24 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr)); } + if (info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]) { + attr = info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]; + + batadv_netlink_set_mesh_ap_isolation(attr, bat_priv); + } + + if (info->attrs[BATADV_ATTR_ISOLATION_MARK]) { + attr = info->attrs[BATADV_ATTR_ISOLATION_MARK]; + + bat_priv->isolation_mark = nla_get_u32(attr); + } + + if (info->attrs[BATADV_ATTR_ISOLATION_MASK]) { + attr = info->attrs[BATADV_ATTR_ISOLATION_MASK]; + + bat_priv->isolation_mark_mask = nla_get_u32(attr); + } + batadv_netlink_notify_mesh(bat_priv); return 0; @@ -705,6 +783,10 @@ static int batadv_netlink_vlan_fill(struct sk_buff *msg, if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK)) goto nla_put_failure; + if (nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION_ENABLED, + !!atomic_read(&vlan->ap_isolation))) + goto nla_put_failure; + genlmsg_end(msg, hdr); return 0; @@ -785,6 +867,13 @@ static int batadv_netlink_set_vlan(struct sk_buff *skb, struct genl_info *info) { struct batadv_softif_vlan *vlan = info->user_ptr[1]; struct batadv_priv *bat_priv = info->user_ptr[0]; + struct nlattr *attr; + + if (info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]) { + attr = info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]; + + atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr)); + } batadv_netlink_notify_vlan(bat_priv, vlan); -- cgit v1.2.3 From d7e52506b680826d6ff7ce73e6a90a3b9defc741 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 12:55:44 +0100 Subject: batman-adv: Add bonding mesh genl configuration The mesh interface can use multiple slave/hard-interface ports at the same time to transport the traffic to other nodes. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BONDING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index fc80f003ed6e..310a2c339fd1 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -143,6 +143,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_AP_ISOLATION_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 }, [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, + [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 }, }; /** @@ -279,6 +280,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, bat_priv->isolation_mark_mask)) goto nla_put_failure; + if (nla_put_u8(msg, BATADV_ATTR_BONDING_ENABLED, + !!atomic_read(&bat_priv->bonding))) + goto nla_put_failure; + if (primary_if) batadv_hardif_put(primary_if); @@ -387,6 +392,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) bat_priv->isolation_mark_mask = nla_get_u32(attr); } + if (info->attrs[BATADV_ATTR_BONDING_ENABLED]) { + attr = info->attrs[BATADV_ATTR_BONDING_ENABLED]; + + atomic_set(&bat_priv->bonding, !!nla_get_u8(attr)); + } + batadv_netlink_notify_mesh(bat_priv); return 0; -- cgit v1.2.3 From 43ff6105a527aaa1a8e00163b0b0aedbbc0c4522 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 13:03:39 +0100 Subject: batman-adv: Add bridge_loop_avoidance mesh genl configuration The mesh interface can try to detect loops in the same mesh caused by (indirectly) bridged mesh/soft-interfaces of different nodes. Some of the loops can also be resolved without breaking the mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 310a2c339fd1..40c940da9498 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -144,6 +144,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 }, [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 }, }; /** @@ -284,6 +285,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, !!atomic_read(&bat_priv->bonding))) goto nla_put_failure; +#ifdef CONFIG_BATMAN_ADV_BLA + if (nla_put_u8(msg, BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED, + !!atomic_read(&bat_priv->bridge_loop_avoidance))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_BLA */ + if (primary_if) batadv_hardif_put(primary_if); @@ -398,6 +405,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) atomic_set(&bat_priv->bonding, !!nla_get_u8(attr)); } +#ifdef CONFIG_BATMAN_ADV_BLA + if (info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]) { + attr = info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]; + + atomic_set(&bat_priv->bridge_loop_avoidance, + !!nla_get_u8(attr)); + batadv_bla_status_update(bat_priv->soft_iface); + } +#endif /* CONFIG_BATMAN_ADV_BLA */ + batadv_netlink_notify_mesh(bat_priv); return 0; -- cgit v1.2.3 From a1c8de80329609ba68ff860074070efb1e14ade4 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 13:06:42 +0100 Subject: batman-adv: Add distributed_arp_table mesh genl configuration The mesh interface can use a distributed hash table to answer ARP requests without flooding the request through the whole mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 40c940da9498..3028c2a5c782 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -145,6 +145,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 }, [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 }, }; /** @@ -291,6 +292,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; #endif /* CONFIG_BATMAN_ADV_BLA */ +#ifdef CONFIG_BATMAN_ADV_DAT + if (nla_put_u8(msg, BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED, + !!atomic_read(&bat_priv->distributed_arp_table))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_DAT */ + if (primary_if) batadv_hardif_put(primary_if); @@ -415,6 +422,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) } #endif /* CONFIG_BATMAN_ADV_BLA */ +#ifdef CONFIG_BATMAN_ADV_DAT + if (info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]) { + attr = info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]; + + atomic_set(&bat_priv->distributed_arp_table, + !!nla_get_u8(attr)); + batadv_dat_status_update(bat_priv->soft_iface); + } +#endif /* CONFIG_BATMAN_ADV_DAT */ + batadv_netlink_notify_mesh(bat_priv); return 0; -- cgit v1.2.3 From 3e15b06eb7e410ef9f1b9673be094b3e10eacf93 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 13:09:49 +0100 Subject: batman-adv: Add fragmentation mesh genl configuration The mesh interface can fragment unicast packets when the packet size exceeds the outgoing slave/hard-interface MTU. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_FRAGMENTATION_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 3028c2a5c782..5b2160d2f482 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -146,6 +146,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_FRAGMENTATION_ENABLED] = { .type = NLA_U8 }, }; /** @@ -298,6 +299,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; #endif /* CONFIG_BATMAN_ADV_DAT */ + if (nla_put_u8(msg, BATADV_ATTR_FRAGMENTATION_ENABLED, + !!atomic_read(&bat_priv->fragmentation))) + goto nla_put_failure; + if (primary_if) batadv_hardif_put(primary_if); @@ -432,6 +437,13 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) } #endif /* CONFIG_BATMAN_ADV_DAT */ + if (info->attrs[BATADV_ATTR_FRAGMENTATION_ENABLED]) { + attr = info->attrs[BATADV_ATTR_FRAGMENTATION_ENABLED]; + + atomic_set(&bat_priv->fragmentation, !!nla_get_u8(attr)); + batadv_update_min_mtu(bat_priv->soft_iface); + } + batadv_netlink_notify_mesh(bat_priv); return 0; -- cgit v1.2.3 From e2d0d35b5b0ce420505e88255fd5922ed035bb8d Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 13:15:00 +0100 Subject: batman-adv: Add gateway mesh genl configuration The mesh/soft-interface can optimize the handling of DHCP packets. Instead of flooding them through the whole mesh, it can be forwarded as unicast to a specific gateway server. The originator which injects the packets in the mesh has to select (based on sel_class thresholds) a responsible gateway server. This is done by switching this originator to the gw_mode client. The servers announce their forwarding bandwidth (download/upload) when the gw_mode server was selected. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the attributes: * u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server) * u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_SEL_CLASS Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/gateway_client.c | 1 - net/batman-adv/gateway_common.c | 1 + net/batman-adv/gateway_common.h | 6 --- net/batman-adv/netlink.c | 92 +++++++++++++++++++++++++++++++++++++++++ net/batman-adv/soft-interface.c | 2 +- net/batman-adv/sysfs.c | 1 + 6 files changed, 95 insertions(+), 8 deletions(-) (limited to 'net/batman-adv') diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c index 0a6b9b30eabd..f5811f61aa92 100644 --- a/net/batman-adv/gateway_client.c +++ b/net/batman-adv/gateway_client.c @@ -47,7 +47,6 @@ #include #include -#include "gateway_common.h" #include "hard-interface.h" #include "log.h" #include "netlink.h" diff --git a/net/batman-adv/gateway_common.c b/net/batman-adv/gateway_common.c index 53d03adc9bfc..e064de45e22c 100644 --- a/net/batman-adv/gateway_common.c +++ b/net/batman-adv/gateway_common.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "gateway_client.h" #include "log.h" diff --git a/net/batman-adv/gateway_common.h b/net/batman-adv/gateway_common.h index 89bae100a0b0..128467a0fb89 100644 --- a/net/batman-adv/gateway_common.h +++ b/net/batman-adv/gateway_common.h @@ -25,12 +25,6 @@ struct net_device; -enum batadv_gw_modes { - BATADV_GW_MODE_OFF, - BATADV_GW_MODE_CLIENT, - BATADV_GW_MODE_SERVER, -}; - /** * enum batadv_bandwidth_units - bandwidth unit types */ diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 5b2160d2f482..473467afea91 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -51,6 +51,7 @@ #include "bridge_loop_avoidance.h" #include "distributed-arp-table.h" #include "gateway_client.h" +#include "gateway_common.h" #include "hard-interface.h" #include "multicast.h" #include "originator.h" @@ -147,6 +148,10 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_FRAGMENTATION_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_GW_BANDWIDTH_DOWN] = { .type = NLA_U32 }, + [BATADV_ATTR_GW_BANDWIDTH_UP] = { .type = NLA_U32 }, + [BATADV_ATTR_GW_MODE] = { .type = NLA_U8 }, + [BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 }, }; /** @@ -303,6 +308,28 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, !!atomic_read(&bat_priv->fragmentation))) goto nla_put_failure; + if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_DOWN, + atomic_read(&bat_priv->gw.bandwidth_down))) + goto nla_put_failure; + + if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_UP, + atomic_read(&bat_priv->gw.bandwidth_up))) + goto nla_put_failure; + + if (nla_put_u8(msg, BATADV_ATTR_GW_MODE, + atomic_read(&bat_priv->gw.mode))) + goto nla_put_failure; + + if (bat_priv->algo_ops->gw.get_best_gw_node && + bat_priv->algo_ops->gw.is_eligible) { + /* GW selection class is not available if the routing algorithm + * in use does not implement the GW API + */ + if (nla_put_u32(msg, BATADV_ATTR_GW_SEL_CLASS, + atomic_read(&bat_priv->gw.sel_class))) + goto nla_put_failure; + } + if (primary_if) batadv_hardif_put(primary_if); @@ -444,6 +471,71 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) batadv_update_min_mtu(bat_priv->soft_iface); } + if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN]) { + attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN]; + + atomic_set(&bat_priv->gw.bandwidth_down, nla_get_u32(attr)); + batadv_gw_tvlv_container_update(bat_priv); + } + + if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP]) { + attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP]; + + atomic_set(&bat_priv->gw.bandwidth_up, nla_get_u32(attr)); + batadv_gw_tvlv_container_update(bat_priv); + } + + if (info->attrs[BATADV_ATTR_GW_MODE]) { + u8 gw_mode; + + attr = info->attrs[BATADV_ATTR_GW_MODE]; + gw_mode = nla_get_u8(attr); + + if (gw_mode <= BATADV_GW_MODE_SERVER) { + /* Invoking batadv_gw_reselect() is not enough to really + * de-select the current GW. It will only instruct the + * gateway client code to perform a re-election the next + * time that this is needed. + * + * When gw client mode is being switched off the current + * GW must be de-selected explicitly otherwise no GW_ADD + * uevent is thrown on client mode re-activation. This + * is operation is performed in + * batadv_gw_check_client_stop(). + */ + batadv_gw_reselect(bat_priv); + + /* always call batadv_gw_check_client_stop() before + * changing the gateway state + */ + batadv_gw_check_client_stop(bat_priv); + atomic_set(&bat_priv->gw.mode, gw_mode); + batadv_gw_tvlv_container_update(bat_priv); + } + } + + if (info->attrs[BATADV_ATTR_GW_SEL_CLASS] && + bat_priv->algo_ops->gw.get_best_gw_node && + bat_priv->algo_ops->gw.is_eligible) { + /* setting the GW selection class is allowed only if the routing + * algorithm in use implements the GW API + */ + + u32 sel_class_max = 0xffffffffu; + u32 sel_class; + + attr = info->attrs[BATADV_ATTR_GW_SEL_CLASS]; + sel_class = nla_get_u32(attr); + + if (!bat_priv->algo_ops->gw.store_sel_class) + sel_class_max = BATADV_TQ_MAX_VALUE; + + if (sel_class >= 1 && sel_class <= sel_class_max) { + atomic_set(&bat_priv->gw.sel_class, sel_class); + batadv_gw_reselect(bat_priv); + } + } + batadv_netlink_notify_mesh(bat_priv); return 0; diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index b14fb3462af7..12028c287de5 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -50,13 +50,13 @@ #include #include #include +#include #include "bat_algo.h" #include "bridge_loop_avoidance.h" #include "debugfs.h" #include "distributed-arp-table.h" #include "gateway_client.h" -#include "gateway_common.h" #include "hard-interface.h" #include "multicast.h" #include "network-coding.h" diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c index e1b816262c53..64fd5932a555 100644 --- a/net/batman-adv/sysfs.c +++ b/net/batman-adv/sysfs.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "bridge_loop_avoidance.h" #include "distributed-arp-table.h" -- cgit v1.2.3 From bfc7f1be57b8a5ea738ce5db62b82234e4901abf Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 13:19:38 +0100 Subject: batman-adv: Add hop_penalty mesh genl configuration The TQ (B.A.T.M.A.N. IV) and throughput values (B.A.T.M.A.N. V) are reduced when they are forwarded. One of the reductions is the penalty for traversing an additional hop. This hop_penalty (0-255) defines the percentage of reduction (0-100%). The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u8 BATADV_ATTR_HOP_PENALTY attribute. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 473467afea91..ce6e6f078765 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -152,6 +152,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_GW_BANDWIDTH_UP] = { .type = NLA_U32 }, [BATADV_ATTR_GW_MODE] = { .type = NLA_U8 }, [BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 }, + [BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 }, }; /** @@ -330,6 +331,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; } + if (nla_put_u8(msg, BATADV_ATTR_HOP_PENALTY, + atomic_read(&bat_priv->hop_penalty))) + goto nla_put_failure; + if (primary_if) batadv_hardif_put(primary_if); @@ -536,6 +541,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) } } + if (info->attrs[BATADV_ATTR_HOP_PENALTY]) { + attr = info->attrs[BATADV_ATTR_HOP_PENALTY]; + + atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr)); + } + batadv_netlink_notify_mesh(bat_priv); return 0; -- cgit v1.2.3 From b85bd091098a52f7bf00d2725b536455f82ba0d0 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 13:22:33 +0100 Subject: batman-adv: Add log_level mesh genl configuration In contrast to other modules, batman-adv allows to set the debug message verbosity per mesh/soft-interface and not per module (via modparam). The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL attribute. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index ce6e6f078765..8c019d46815c 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -53,6 +53,7 @@ #include "gateway_client.h" #include "gateway_common.h" #include "hard-interface.h" +#include "log.h" #include "multicast.h" #include "originator.h" #include "soft-interface.h" @@ -153,6 +154,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_GW_MODE] = { .type = NLA_U8 }, [BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 }, [BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 }, + [BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 }, }; /** @@ -335,6 +337,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, atomic_read(&bat_priv->hop_penalty))) goto nla_put_failure; +#ifdef CONFIG_BATMAN_ADV_DEBUG + if (nla_put_u32(msg, BATADV_ATTR_LOG_LEVEL, + atomic_read(&bat_priv->log_level))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_DEBUG */ + if (primary_if) batadv_hardif_put(primary_if); @@ -547,6 +555,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr)); } +#ifdef CONFIG_BATMAN_ADV_DEBUG + if (info->attrs[BATADV_ATTR_LOG_LEVEL]) { + attr = info->attrs[BATADV_ATTR_LOG_LEVEL]; + + atomic_set(&bat_priv->log_level, + nla_get_u32(attr) & BATADV_DBG_ALL); + } +#endif /* CONFIG_BATMAN_ADV_DEBUG */ + batadv_netlink_notify_mesh(bat_priv); return 0; -- cgit v1.2.3 From f75b56bc91122e2934e2cb458f98727c41d535c7 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 13:25:05 +0100 Subject: batman-adv: Add multicast forceflood mesh genl configuration The mesh interface can optimize the flooding of multicast packets based on the content of the global translation tables. To disable this behavior and use the broadcast-like flooding of the packets, forceflood has to be enabled. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED attribute. Setting the u8 to zero will disable this feature (allowing multicast optimizations) and setting it to something else is enabling this feature (forcing simple flooding). Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 8c019d46815c..475bd15f806c 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -155,6 +155,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 }, [BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 }, [BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 }, + [BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED] = { .type = NLA_U8 }, }; /** @@ -343,6 +344,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; #endif /* CONFIG_BATMAN_ADV_DEBUG */ +#ifdef CONFIG_BATMAN_ADV_MCAST + if (nla_put_u8(msg, BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED, + !atomic_read(&bat_priv->multicast_mode))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_MCAST */ + if (primary_if) batadv_hardif_put(primary_if); @@ -564,6 +571,14 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) } #endif /* CONFIG_BATMAN_ADV_DEBUG */ +#ifdef CONFIG_BATMAN_ADV_MCAST + if (info->attrs[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]) { + attr = info->attrs[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]; + + atomic_set(&bat_priv->multicast_mode, !nla_get_u8(attr)); + } +#endif /* CONFIG_BATMAN_ADV_MCAST */ + batadv_netlink_notify_mesh(bat_priv); return 0; -- cgit v1.2.3 From 6c57cde6800bae2361b8ac14a5924ffc592b3a90 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 13:26:14 +0100 Subject: batman-adv: Add network_coding mesh genl configuration The mesh interface can use (in an homogeneous mesh) network coding, a mechanism that aims to increase the overall network throughput by fusing multiple packets in one transmission. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_NETWORK_CODING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 475bd15f806c..6f01f92e6ab3 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -55,6 +55,7 @@ #include "hard-interface.h" #include "log.h" #include "multicast.h" +#include "network-coding.h" #include "originator.h" #include "soft-interface.h" #include "tp_meter.h" @@ -156,6 +157,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 }, [BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 }, [BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 }, }; /** @@ -350,6 +352,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; #endif /* CONFIG_BATMAN_ADV_MCAST */ +#ifdef CONFIG_BATMAN_ADV_NC + if (nla_put_u8(msg, BATADV_ATTR_NETWORK_CODING_ENABLED, + !!atomic_read(&bat_priv->network_coding))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_NC */ + if (primary_if) batadv_hardif_put(primary_if); @@ -579,6 +587,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) } #endif /* CONFIG_BATMAN_ADV_MCAST */ +#ifdef CONFIG_BATMAN_ADV_NC + if (info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED]) { + attr = info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED]; + + atomic_set(&bat_priv->network_coding, !!nla_get_u8(attr)); + batadv_nc_status_update(bat_priv->soft_iface); + } +#endif /* CONFIG_BATMAN_ADV_NC */ + batadv_netlink_notify_mesh(bat_priv); return 0; -- cgit v1.2.3 From 7b751b39f018a828a04692e199c044087102e96c Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 13:28:02 +0100 Subject: batman-adv: Add orig_interval mesh genl configuration The OGM packets are transmitted every orig_interval milliseconds. This value can be changed using the configuration interface. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ORIG_INTERVAL attribute. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 6f01f92e6ab3..e25c139ba0e1 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -158,6 +158,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 }, [BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 }, + [BATADV_ATTR_ORIG_INTERVAL] = { .type = NLA_U32 }, }; /** @@ -358,6 +359,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg, goto nla_put_failure; #endif /* CONFIG_BATMAN_ADV_NC */ + if (nla_put_u32(msg, BATADV_ATTR_ORIG_INTERVAL, + atomic_read(&bat_priv->orig_interval))) + goto nla_put_failure; + if (primary_if) batadv_hardif_put(primary_if); @@ -596,6 +601,18 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info) } #endif /* CONFIG_BATMAN_ADV_NC */ + if (info->attrs[BATADV_ATTR_ORIG_INTERVAL]) { + u32 orig_interval; + + attr = info->attrs[BATADV_ATTR_ORIG_INTERVAL]; + orig_interval = nla_get_u32(attr); + + orig_interval = min_t(u32, orig_interval, INT_MAX); + orig_interval = max_t(u32, orig_interval, 2 * BATADV_JITTER); + + atomic_set(&bat_priv->orig_interval, orig_interval); + } + batadv_netlink_notify_mesh(bat_priv); return 0; -- cgit v1.2.3 From a108008290405545b43b9c7975344bc59af2341b Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 13:30:04 +0100 Subject: batman-adv: Add elp_interval hardif genl configuration The ELP packets are transmitted every elp_interval milliseconds on an slave/hard-interface. This value can be changed using the configuration interface. The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ELP_INTERVAL attribute. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index e25c139ba0e1..09187e6e92a3 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -159,6 +159,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_ORIG_INTERVAL] = { .type = NLA_U32 }, + [BATADV_ATTR_ELP_INTERVAL] = { .type = NLA_U32 }, }; /** @@ -825,6 +826,12 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg, goto nla_put_failure; } +#ifdef CONFIG_BATMAN_ADV_BATMAN_V + if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL, + atomic_read(&hard_iface->bat_v.elp_interval))) + goto nla_put_failure; +#endif /* CONFIG_BATMAN_ADV_BATMAN_V */ + genlmsg_end(msg, hdr); return 0; @@ -910,6 +917,16 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb, struct batadv_hard_iface *hard_iface = info->user_ptr[1]; struct batadv_priv *bat_priv = info->user_ptr[0]; +#ifdef CONFIG_BATMAN_ADV_BATMAN_V + struct nlattr *attr; + + if (info->attrs[BATADV_ATTR_ELP_INTERVAL]) { + attr = info->attrs[BATADV_ATTR_ELP_INTERVAL]; + + atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr)); + } +#endif /* CONFIG_BATMAN_ADV_BATMAN_V */ + batadv_netlink_notify_hardif(bat_priv, hard_iface); return 0; -- cgit v1.2.3 From 9a182242f17c06fad620663e6fdf992e97661e66 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 13:31:23 +0100 Subject: batman-adv: Add throughput_override hardif genl configuration The B.A.T.M.A.N. V implementation tries to estimate the link throughput of an interface to an originator using different automatic methods. It is still possible to overwrite it the link throughput for all reachable originators via this interface. The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_THROUGHPUT_OVERRIDE attribute. The used unit is in 100 Kbit/s. If the value is set to 0 then batman-adv will try to estimate the throughput by itself. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 09187e6e92a3..476b4c6017c9 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -160,6 +160,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = { [BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 }, [BATADV_ATTR_ORIG_INTERVAL] = { .type = NLA_U32 }, [BATADV_ATTR_ELP_INTERVAL] = { .type = NLA_U32 }, + [BATADV_ATTR_THROUGHPUT_OVERRIDE] = { .type = NLA_U32 }, }; /** @@ -830,6 +831,10 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg, if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL, atomic_read(&hard_iface->bat_v.elp_interval))) goto nla_put_failure; + + if (nla_put_u32(msg, BATADV_ATTR_THROUGHPUT_OVERRIDE, + atomic_read(&hard_iface->bat_v.throughput_override))) + goto nla_put_failure; #endif /* CONFIG_BATMAN_ADV_BATMAN_V */ genlmsg_end(msg, hdr); @@ -925,6 +930,13 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb, atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr)); } + + if (info->attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE]) { + attr = info->attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE]; + + atomic_set(&hard_iface->bat_v.throughput_override, + nla_get_u32(attr)); + } #endif /* CONFIG_BATMAN_ADV_BATMAN_V */ batadv_netlink_notify_hardif(bat_priv, hard_iface); -- cgit v1.2.3 From 7e6f461efe2554e35b740f3faea2994fc9551947 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 23 Nov 2018 16:07:12 +0100 Subject: batman-adv: Trigger genl notification on sysfs config change The generic netlink code is expected to trigger notification messages when configuration might have been changed. But the configuration of batman-adv is most of the time still done using sysfs. So the sysfs interface should also trigger the corresponding netlink messages via the "config" multicast group. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/netlink.c | 10 ++++---- net/batman-adv/netlink.h | 6 +++++ net/batman-adv/sysfs.c | 63 +++++++++++++++++++++++++++++++++++++++--------- 3 files changed, 63 insertions(+), 16 deletions(-) (limited to 'net/batman-adv') diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c index 476b4c6017c9..67a58da2e6a0 100644 --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -385,7 +385,7 @@ nla_put_failure: * * Return: 0 on success, < 0 on error */ -static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv) +int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv) { struct sk_buff *msg; int ret; @@ -852,8 +852,8 @@ nla_put_failure: * * Return: 0 on success, < 0 on error */ -static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv, - struct batadv_hard_iface *hard_iface) +int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv, + struct batadv_hard_iface *hard_iface) { struct sk_buff *msg; int ret; @@ -1057,8 +1057,8 @@ nla_put_failure: * * Return: 0 on success, < 0 on error */ -static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv, - struct batadv_softif_vlan *vlan) +int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv, + struct batadv_softif_vlan *vlan) { struct sk_buff *msg; int ret; diff --git a/net/batman-adv/netlink.h b/net/batman-adv/netlink.h index 216484b8b82d..7273368544fc 100644 --- a/net/batman-adv/netlink.h +++ b/net/batman-adv/netlink.h @@ -34,6 +34,12 @@ int batadv_netlink_tpmeter_notify(struct batadv_priv *bat_priv, const u8 *dst, u8 result, u32 test_time, u64 total_bytes, u32 cookie); +int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv); +int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv, + struct batadv_hard_iface *hard_iface); +int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv, + struct batadv_softif_vlan *vlan); + extern struct genl_family batadv_netlink_family; #endif /* _NET_BATMAN_ADV_NETLINK_H_ */ diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c index 64fd5932a555..0b4b3fb778a6 100644 --- a/net/batman-adv/sysfs.c +++ b/net/batman-adv/sysfs.c @@ -48,6 +48,7 @@ #include "gateway_common.h" #include "hard-interface.h" #include "log.h" +#include "netlink.h" #include "network-coding.h" #include "soft-interface.h" @@ -154,9 +155,14 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \ { \ struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \ struct batadv_priv *bat_priv = netdev_priv(net_dev); \ + ssize_t length; \ + \ + length = __batadv_store_bool_attr(buff, count, _post_func, attr,\ + &bat_priv->_name, net_dev); \ \ - return __batadv_store_bool_attr(buff, count, _post_func, attr, \ - &bat_priv->_name, net_dev); \ + batadv_netlink_notify_mesh(bat_priv); \ + \ + return length; \ } #define BATADV_ATTR_SIF_SHOW_BOOL(_name) \ @@ -186,11 +192,16 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \ { \ struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \ struct batadv_priv *bat_priv = netdev_priv(net_dev); \ + ssize_t length; \ \ - return __batadv_store_uint_attr(buff, count, _min, _max, \ - _post_func, attr, \ - &bat_priv->_var, net_dev, \ - NULL); \ + length = __batadv_store_uint_attr(buff, count, _min, _max, \ + _post_func, attr, \ + &bat_priv->_var, net_dev, \ + NULL); \ + \ + batadv_netlink_notify_mesh(bat_priv); \ + \ + return length; \ } #define BATADV_ATTR_SIF_SHOW_UINT(_name, _var) \ @@ -223,6 +234,11 @@ ssize_t batadv_store_vlan_##_name(struct kobject *kobj, \ attr, &vlan->_name, \ bat_priv->soft_iface); \ \ + if (vlan->vid) \ + batadv_netlink_notify_vlan(bat_priv, vlan); \ + else \ + batadv_netlink_notify_mesh(bat_priv); \ + \ batadv_softif_vlan_put(vlan); \ return res; \ } @@ -256,6 +272,7 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \ { \ struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \ struct batadv_hard_iface *hard_iface; \ + struct batadv_priv *bat_priv; \ ssize_t length; \ \ hard_iface = batadv_hardif_get_by_netdev(net_dev); \ @@ -268,6 +285,11 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \ hard_iface->soft_iface, \ net_dev); \ \ + if (hard_iface->soft_iface) { \ + bat_priv = netdev_priv(hard_iface->soft_iface); \ + batadv_netlink_notify_hardif(bat_priv, hard_iface); \ + } \ + \ batadv_hardif_put(hard_iface); \ return length; \ } @@ -537,6 +559,9 @@ static ssize_t batadv_store_gw_mode(struct kobject *kobj, batadv_gw_check_client_stop(bat_priv); atomic_set(&bat_priv->gw.mode, (unsigned int)gw_mode_tmp); batadv_gw_tvlv_container_update(bat_priv); + + batadv_netlink_notify_mesh(bat_priv); + return count; } @@ -563,6 +588,7 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj, size_t count) { struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); + ssize_t length; /* setting the GW selection class is allowed only if the routing * algorithm in use implements the GW API @@ -578,10 +604,14 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj, return bat_priv->algo_ops->gw.store_sel_class(bat_priv, buff, count); - return __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE, - batadv_post_gw_reselect, attr, - &bat_priv->gw.sel_class, - bat_priv->soft_iface, NULL); + length = __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE, + batadv_post_gw_reselect, attr, + &bat_priv->gw.sel_class, + bat_priv->soft_iface, NULL); + + batadv_netlink_notify_mesh(bat_priv); + + return length; } static ssize_t batadv_show_gw_bwidth(struct kobject *kobj, @@ -601,12 +631,18 @@ static ssize_t batadv_store_gw_bwidth(struct kobject *kobj, struct attribute *attr, char *buff, size_t count) { + struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); struct net_device *net_dev = batadv_kobj_to_netdev(kobj); + ssize_t length; if (buff[count - 1] == '\n') buff[count - 1] = '\0'; - return batadv_gw_bandwidth_set(net_dev, buff, count); + length = batadv_gw_bandwidth_set(net_dev, buff, count); + + batadv_netlink_notify_mesh(bat_priv); + + return length; } /** @@ -674,6 +710,8 @@ static ssize_t batadv_store_isolation_mark(struct kobject *kobj, "New skb mark for extended isolation: %#.8x/%#.8x\n", bat_priv->isolation_mark, bat_priv->isolation_mark_mask); + batadv_netlink_notify_mesh(bat_priv); + return count; } @@ -1078,6 +1116,7 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj, struct attribute *attr, char *buff, size_t count) { + struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj); struct net_device *net_dev = batadv_kobj_to_netdev(kobj); struct batadv_hard_iface *hard_iface; u32 tp_override; @@ -1108,6 +1147,8 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj, atomic_set(&hard_iface->bat_v.throughput_override, tp_override); + batadv_netlink_notify_hardif(bat_priv, hard_iface); + out: batadv_hardif_put(hard_iface); return count; -- cgit v1.2.3