From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- sound/oss/pas2_card.c | 458 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 458 insertions(+) create mode 100644 sound/oss/pas2_card.c (limited to 'sound/oss/pas2_card.c') diff --git a/sound/oss/pas2_card.c b/sound/oss/pas2_card.c new file mode 100644 index 000000000000..c9696dc9fdf9 --- /dev/null +++ b/sound/oss/pas2_card.c @@ -0,0 +1,458 @@ +/* + * sound/pas2_card.c + * + * Detection routine for the Pro Audio Spectrum cards. + */ + +#include +#include +#include +#include +#include +#include "sound_config.h" + +#include "pas2.h" +#include "sb.h" + +static unsigned char dma_bits[] = { + 4, 1, 2, 3, 0, 5, 6, 7 +}; + +static unsigned char irq_bits[] = { + 0, 0, 1, 2, 3, 4, 5, 6, 0, 1, 7, 8, 9, 0, 10, 11 +}; + +static unsigned char sb_irq_bits[] = { + 0x00, 0x00, 0x08, 0x10, 0x00, 0x18, 0x00, 0x20, + 0x00, 0x08, 0x28, 0x30, 0x38, 0, 0 +}; + +static unsigned char sb_dma_bits[] = { + 0x00, 0x40, 0x80, 0xC0, 0, 0, 0, 0 +}; + +/* + * The Address Translation code is used to convert I/O register addresses to + * be relative to the given base -register + */ + +int pas_translate_code = 0; +static int pas_intr_mask; +static int pas_irq; +static int pas_sb_base; +DEFINE_SPINLOCK(pas_lock); +#ifndef CONFIG_PAS_JOYSTICK +static int joystick; +#else +static int joystick = 1; +#endif +#ifdef SYMPHONY_PAS +static int symphony = 1; +#else +static int symphony; +#endif +#ifdef BROKEN_BUS_CLOCK +static int broken_bus_clock = 1; +#else +static int broken_bus_clock; +#endif + +static struct address_info cfg; +static struct address_info cfg2; + +char pas_model = 0; +static char *pas_model_names[] = { + "", + "Pro AudioSpectrum+", + "CDPC", + "Pro AudioSpectrum 16", + "Pro AudioSpectrum 16D" +}; + +/* + * pas_read() and pas_write() are equivalents of inb and outb + * These routines perform the I/O address translation required + * to support other than the default base address + */ + +extern void mix_write(unsigned char data, int ioaddr); + +unsigned char pas_read(int ioaddr) +{ + return inb(ioaddr + pas_translate_code); +} + +void pas_write(unsigned char data, int ioaddr) +{ + outb((data), ioaddr + pas_translate_code); +} + +/******************* Begin of the Interrupt Handler ********************/ + +static irqreturn_t pasintr(int irq, void *dev_id, struct pt_regs *dummy) +{ + int status; + + status = pas_read(0x0B89); + pas_write(status, 0x0B89); /* Clear interrupt */ + + if (status & 0x08) + { + pas_pcm_interrupt(status, 1); + status &= ~0x08; + } + if (status & 0x10) + { + pas_midi_interrupt(); + status &= ~0x10; + } + return IRQ_HANDLED; +} + +int pas_set_intr(int mask) +{ + if (!mask) + return 0; + + pas_intr_mask |= mask; + + pas_write(pas_intr_mask, 0x0B8B); + return 0; +} + +int pas_remove_intr(int mask) +{ + if (!mask) + return 0; + + pas_intr_mask &= ~mask; + pas_write(pas_intr_mask, 0x0B8B); + + return 0; +} + +/******************* End of the Interrupt handler **********************/ + +/******************* Begin of the Initialization Code ******************/ + +static int __init config_pas_hw(struct address_info *hw_config) +{ + char ok = 1; + unsigned int_ptrs; /* scsi/sound interrupt pointers */ + + pas_irq = hw_config->irq; + + pas_write(0x00, 0x0B8B); + pas_write(0x36, 0x138B); + pas_write(0x36, 0x1388); + pas_write(0, 0x1388); + pas_write(0x74, 0x138B); + pas_write(0x74, 0x1389); + pas_write(0, 0x1389); + + pas_write(0x80 | 0x40 | 0x20 | 1, 0x0B8A); + pas_write(0x80 | 0x20 | 0x10 | 0x08 | 0x01, 0xF8A); + pas_write(0x01 | 0x02 | 0x04 | 0x10 /* + * | + * 0x80 + */ , 0xB88); + + pas_write(0x80 + | joystick?0x40:0 + ,0xF388); + + if (pas_irq < 0 || pas_irq > 15) + { + printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq); + hw_config->irq=-1; + ok = 0; + } + else + { + int_ptrs = pas_read(0xF38A); + int_ptrs = (int_ptrs & 0xf0) | irq_bits[pas_irq]; + pas_write(int_ptrs, 0xF38A); + if (!irq_bits[pas_irq]) + { + printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq); + hw_config->irq=-1; + ok = 0; + } + else + { + if (request_irq(pas_irq, pasintr, 0, "PAS16",hw_config) < 0) { + printk(KERN_ERR "PAS16: Cannot allocate IRQ %d\n",pas_irq); + hw_config->irq=-1; + ok = 0; + } + } + } + + if (hw_config->dma < 0 || hw_config->dma > 7) + { + printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma); + hw_config->dma=-1; + ok = 0; + } + else + { + pas_write(dma_bits[hw_config->dma], 0xF389); + if (!dma_bits[hw_config->dma]) + { + printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma); + hw_config->dma=-1; + ok = 0; + } + else + { + if (sound_alloc_dma(hw_config->dma, "PAS16")) + { + printk(KERN_ERR "pas2_card.c: Can't allocate DMA channel\n"); + hw_config->dma=-1; + ok = 0; + } + } + } + + /* + * This fixes the timing problems of the PAS due to the Symphony chipset + * as per Media Vision. Only define this if your PAS doesn't work correctly. + */ + + if(symphony) + { + outb((0x05), 0xa8); + outb((0x60), 0xa9); + } + + if(broken_bus_clock) + pas_write(0x01 | 0x10 | 0x20 | 0x04, 0x8388); + else + /* + * pas_write(0x01, 0x8388); + */ + pas_write(0x01 | 0x10 | 0x20, 0x8388); + + pas_write(0x18, 0x838A); /* ??? */ + pas_write(0x20 | 0x01, 0x0B8A); /* Mute off, filter = 17.897 kHz */ + pas_write(8, 0xBF8A); + + mix_write(0x80 | 5, 0x078B); + mix_write(5, 0x078B); + + { + struct address_info *sb_config; + + sb_config = &cfg2; + if (sb_config->io_base) + { + unsigned char irq_dma; + + /* + * Turn on Sound Blaster compatibility + * bit 1 = SB emulation + * bit 0 = MPU401 emulation (CDPC only :-( ) + */ + + pas_write(0x02, 0xF788); + + /* + * "Emulation address" + */ + + pas_write((sb_config->io_base >> 4) & 0x0f, 0xF789); + pas_sb_base = sb_config->io_base; + + if (!sb_dma_bits[sb_config->dma]) + printk(KERN_ERR "PAS16 Warning: Invalid SB DMA %d\n\n", sb_config->dma); + + if (!sb_irq_bits[sb_config->irq]) + printk(KERN_ERR "PAS16 Warning: Invalid SB IRQ %d\n\n", sb_config->irq); + + irq_dma = sb_dma_bits[sb_config->dma] | + sb_irq_bits[sb_config->irq]; + + pas_write(irq_dma, 0xFB8A); + } + else + pas_write(0x00, 0xF788); + } + + if (!ok) + printk(KERN_WARNING "PAS16: Driver not enabled\n"); + + return ok; +} + +static int __init detect_pas_hw(struct address_info *hw_config) +{ + unsigned char board_id, foo; + + /* + * WARNING: Setting an option like W:1 or so that disables warm boot reset + * of the card will screw up this detect code something fierce. Adding code + * to handle this means possibly interfering with other cards on the bus if + * you have something on base port 0x388. SO be forewarned. + */ + + outb((0xBC), 0x9A01); /* Activate first board */ + outb((hw_config->io_base >> 2), 0x9A01); /* Set base address */ + pas_translate_code = hw_config->io_base - 0x388; + pas_write(1, 0xBF88); /* Select one wait states */ + + board_id = pas_read(0x0B8B); + + if (board_id == 0xff) + return 0; + + /* + * We probably have a PAS-series board, now check for a PAS16-series board + * by trying to change the board revision bits. PAS16-series hardware won't + * let you do this - the bits are read-only. + */ + + foo = board_id ^ 0xe0; + + pas_write(foo, 0x0B8B); + foo = pas_read(0x0B8B); + pas_write(board_id, 0x0B8B); + + if (board_id != foo) + return 0; + + pas_model = pas_read(0xFF88); + + return pas_model; +} + +static void __init attach_pas_card(struct address_info *hw_config) +{ + pas_irq = hw_config->irq; + + if (detect_pas_hw(hw_config)) + { + + if ((pas_model = pas_read(0xFF88))) + { + char temp[100]; + + sprintf(temp, + "%s rev %d", pas_model_names[(int) pas_model], + pas_read(0x2789)); + conf_printf(temp, hw_config); + } + if (config_pas_hw(hw_config)) + { + pas_pcm_init(hw_config); + pas_midi_init(); + pas_init_mixer(); + } + } +} + +static inline int __init probe_pas(struct address_info *hw_config) +{ + return detect_pas_hw(hw_config); +} + +static void __exit unload_pas(struct address_info *hw_config) +{ + extern int pas_audiodev; + extern int pas2_mididev; + + if (hw_config->dma>0) + sound_free_dma(hw_config->dma); + if (hw_config->irq>0) + free_irq(hw_config->irq, hw_config); + + if(pas_audiodev!=-1) + sound_unload_mixerdev(audio_devs[pas_audiodev]->mixer_dev); + if(pas2_mididev!=-1) + sound_unload_mididev(pas2_mididev); + if(pas_audiodev!=-1) + sound_unload_audiodev(pas_audiodev); +} + +static int __initdata io = -1; +static int __initdata irq = -1; +static int __initdata dma = -1; +static int __initdata dma16 = -1; /* Set this for modules that need it */ + +static int __initdata sb_io = 0; +static int __initdata sb_irq = -1; +static int __initdata sb_dma = -1; +static int __initdata sb_dma16 = -1; + +module_param(io, int, 0); +module_param(irq, int, 0); +module_param(dma, int, 0); +module_param(dma16, int, 0); + +module_param(sb_io, int, 0); +module_param(sb_irq, int, 0); +module_param(sb_dma, int, 0); +module_param(sb_dma16, int, 0); + +module_param(joystick, bool, 0); +module_param(symphony, bool, 0); +module_param(broken_bus_clock, bool, 0); + +MODULE_LICENSE("GPL"); + +static int __init init_pas2(void) +{ + printk(KERN_INFO "Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996\n"); + + cfg.io_base = io; + cfg.irq = irq; + cfg.dma = dma; + cfg.dma2 = dma16; + + cfg2.io_base = sb_io; + cfg2.irq = sb_irq; + cfg2.dma = sb_dma; + cfg2.dma2 = sb_dma16; + + if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) { + printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n"); + return -EINVAL; + } + + if (!probe_pas(&cfg)) + return -ENODEV; + attach_pas_card(&cfg); + + return 0; +} + +static void __exit cleanup_pas2(void) +{ + unload_pas(&cfg); +} + +module_init(init_pas2); +module_exit(cleanup_pas2); + +#ifndef MODULE +static int __init setup_pas2(char *str) +{ + /* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, sb_dma2 */ + int ints[9]; + + str = get_options(str, ARRAY_SIZE(ints), ints); + + io = ints[1]; + irq = ints[2]; + dma = ints[3]; + dma16 = ints[4]; + + sb_io = ints[5]; + sb_irq = ints[6]; + sb_dma = ints[7]; + sb_dma16 = ints[8]; + + return 1; +} + +__setup("pas2=", setup_pas2); +#endif -- cgit v1.2.3