From 561a7d6e853f170877a2ebf87f64e0e846b6a99c Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Mon, 5 May 2014 02:38:44 +0300 Subject: ALSA: hda - hdmi: Set infoframe and channel mapping even without sink Currently infoframe contents and channel mapping are only set when a sink (monitor) is present. However, this does not make much sense, since 1) We can make a very reasonable guess on CA after 18e391862c ("ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CA") or by relying on a previously valid ELD (or we may be using a user-specified channel map). 2) Not setting infoframe contents and channel count simply means they are left at a possibly incorrect state - playback is still allowed to proceed (with missing or wrongly mapped channels). Reasons for monitor_present being 0 include disconnected cable, video driver issues, or codec not being spec-compliant. Note that in actual disconnected-cable case it should not matter if these settings are wrong as they will be re-set after jack detection, though. Change the behavior to allow the infoframe contents and the channel mapping to be set even without a sink/monitor, either based on the previous valid ELD contents, if any, or based on sensible defaults (standard channel layouts or provided custom map, sink type HDMI). Signed-off-by: Anssi Hannula Tested-by: Stephan Raue Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'sound/pci/hda') diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 1edbb9c47c2d..016f785cdf45 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1127,10 +1127,6 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, AMP_OUT_UNMUTE); eld = &per_pin->sink_eld; - if (!eld->monitor_present) { - hdmi_set_channel_count(codec, per_pin->cvt_nid, channels); - return; - } if (!non_pcm && per_pin->chmap_set) ca = hdmi_manual_channel_allocation(channels, per_pin->chmap); -- cgit v1.2.3