From 863b45180ef541a1990e4986d30fb7a93022a733 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 21 Oct 2008 17:01:47 +0200 Subject: ALSA: hda - Fix conflicting volume controls on ALC260 ALC260 auto-parsing mode may create multiple controls for the same volume widget (0x08 and 0x09) depending on the pin. For example, Front and Headphone volumes may control the same volume, just the latter one wins. This patch adds a proper check of the existing of the volume control and avoid the doulbed creation of the same volume controls. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e72707cb60a3..ef4955c73c88 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4996,7 +4996,7 @@ static struct hda_verb alc260_test_init_verbs[] = { */ static int alc260_add_playback_controls(struct alc_spec *spec, hda_nid_t nid, - const char *pfx) + const char *pfx, int *vol_bits) { hda_nid_t nid_vol; unsigned long vol_val, sw_val; @@ -5018,10 +5018,14 @@ static int alc260_add_playback_controls(struct alc_spec *spec, hda_nid_t nid, } else return 0; /* N/A */ - snprintf(name, sizeof(name), "%s Playback Volume", pfx); - err = add_control(spec, ALC_CTL_WIDGET_VOL, name, vol_val); - if (err < 0) - return err; + if (!(*vol_bits & (1 << nid_vol))) { + /* first control for the volume widget */ + snprintf(name, sizeof(name), "%s Playback Volume", pfx); + err = add_control(spec, ALC_CTL_WIDGET_VOL, name, vol_val); + if (err < 0) + return err; + *vol_bits |= (1 << nid_vol); + } snprintf(name, sizeof(name), "%s Playback Switch", pfx); err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, sw_val); if (err < 0) @@ -5035,6 +5039,7 @@ static int alc260_auto_create_multi_out_ctls(struct alc_spec *spec, { hda_nid_t nid; int err; + int vols = 0; spec->multiout.num_dacs = 1; spec->multiout.dac_nids = spec->private_dac_nids; @@ -5042,21 +5047,22 @@ static int alc260_auto_create_multi_out_ctls(struct alc_spec *spec, nid = cfg->line_out_pins[0]; if (nid) { - err = alc260_add_playback_controls(spec, nid, "Front"); + err = alc260_add_playback_controls(spec, nid, "Front", &vols); if (err < 0) return err; } nid = cfg->speaker_pins[0]; if (nid) { - err = alc260_add_playback_controls(spec, nid, "Speaker"); + err = alc260_add_playback_controls(spec, nid, "Speaker", &vols); if (err < 0) return err; } nid = cfg->hp_pins[0]; if (nid) { - err = alc260_add_playback_controls(spec, nid, "Headphone"); + err = alc260_add_playback_controls(spec, nid, "Headphone", + &vols); if (err < 0) return err; } -- cgit v1.2.3 From da74ae3e32374755e0fbdfed4074cf839a82f615 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Tue, 21 Oct 2008 20:28:04 -0700 Subject: ALSA: hda - correct bracketing in spdif test in patch_sigmatel.c Noticed by sparse: sound/pci/hda/patch_sigmatel.c:1285:43: warning: dubious: !x & y Signed-off-by: Harvey Harrison Acked-by: Matthew Ranostay Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a2ac7205d45d..788fdc6f3264 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1282,7 +1282,7 @@ static int stac92xx_build_controls(struct hda_codec *codec) return err; spec->multiout.share_spdif = 1; } - if (spec->dig_in_nid && (!spec->gpio_dir & 0x01)) { + if (spec->dig_in_nid && !(spec->gpio_dir & 0x01)) { err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid); if (err < 0) return err; -- cgit v1.2.3 From 13095c37b29b90ec96070cb63400a79737b4a185 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 22 Oct 2008 13:27:49 +0100 Subject: ALSA: Ensure PXA runtime data is initialised The rest of the code relies on the runtime data being zero initialised so we need to use kzalloc() to allocate it. Reported-by: Oliver Ford Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/arm/pxa2xx-pcm-lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c index 1c93eb77cb99..75a0d746fb60 100644 --- a/sound/arm/pxa2xx-pcm-lib.c +++ b/sound/arm/pxa2xx-pcm-lib.c @@ -194,7 +194,7 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream) goto out; ret = -ENOMEM; - rtd = kmalloc(sizeof(*rtd), GFP_KERNEL); + rtd = kzalloc(sizeof(*rtd), GFP_KERNEL); if (!rtd) goto out; rtd->dma_desc_array = -- cgit v1.2.3 From da6320becf31c40b60d4b1dc6b339c9a766b671c Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 22 Oct 2008 15:00:29 +0300 Subject: ALSA: ASoC: OMAP: Continue fixing DSP DAI format in McBSP DAI driver Fix "ASoC: OMAP: Fix DSP DAI format in McBSP DAI driver" was not correct due misunderstanding of DSP_A format and similar error in TLV320AIC33 codec which was used to test the original fix. This patch corrects now DSP_A format in OMAP McBSP DAI driver and is verified with TLV320AIC23 codec that's implementing DSP_A correctly. Signed-off-by: Jarkko Nikula Cc: Arun KS Signed-off-by: Takashi Iwai --- sound/soc/omap/omap-mcbsp.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'sound') diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 853b33ae3435..8485a8a9d0ff 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -265,7 +265,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, break; case SND_SOC_DAIFMT_DSP_A: regs->srgr2 |= FPER(wlen * 2 - 1); - regs->srgr1 |= FWID(0); + regs->srgr1 |= FWID(wlen * 2 - 2); break; } @@ -284,7 +284,6 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, { struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data); struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs; - unsigned int temp_fmt = fmt; if (mcbsp_data->configured) return 0; @@ -307,8 +306,6 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, /* 0-bit data delay */ regs->rcr2 |= RDATDLY(0); regs->xcr2 |= XDATDLY(0); - /* Invert bit clock and FS polarity configuration for DSP_A */ - temp_fmt ^= SND_SOC_DAIFMT_IB_IF; break; default: /* Unsupported data format */ @@ -332,7 +329,7 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, } /* Set bit clock (CLKX/CLKR) and FS polarities */ - switch (temp_fmt & SND_SOC_DAIFMT_INV_MASK) { + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { case SND_SOC_DAIFMT_NB_NF: /* * Normal BCLK + FS. -- cgit v1.2.3 From 4b7d283150b35db6e5e10f72606f603ff424c92a Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 23 Oct 2008 14:27:03 +0300 Subject: ALSA: ASoC: tlv320aic3x: Fix DSP DAI format and signal polarities matching - Codec doesn't support to configure bit clock and frame sync polarities - Codec doesn't support DSP_A format but DSP_B with inverted bit clock polarity - Match also other formats with their signal polarities Signed-off-by: Jarkko Nikula Acked-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/codecs/tlv320aic3x.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 05336ed7e493..cff276ee261e 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -863,17 +863,21 @@ static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai, return -EINVAL; } - /* interface format */ - switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { - case SND_SOC_DAIFMT_I2S: + /* + * match both interface format and signal polarities since they + * are fixed + */ + switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK | + SND_SOC_DAIFMT_INV_MASK)) { + case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF): break; - case SND_SOC_DAIFMT_DSP_A: + case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF): iface_breg |= (0x01 << 6); break; - case SND_SOC_DAIFMT_RIGHT_J: + case (SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF): iface_breg |= (0x02 << 6); break; - case SND_SOC_DAIFMT_LEFT_J: + case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF): iface_breg |= (0x03 << 6); break; default: -- cgit v1.2.3 From 9f50bbad8fc3b0f9fd453ab1e2716b3106d89b13 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Oct 2008 13:57:39 +0200 Subject: ALSA: aoa i2sbus: don't overwrite module parameter We shouldn't modify a global variable here. Signed-off-by: Johannes Berg Signed-off-by: Takashi Iwai --- sound/aoa/soundbus/i2sbus/i2sbus-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/aoa/soundbus/i2sbus/i2sbus-core.c b/sound/aoa/soundbus/i2sbus/i2sbus-core.c index e6beb92c6933..b4590df07466 100644 --- a/sound/aoa/soundbus/i2sbus/i2sbus-core.c +++ b/sound/aoa/soundbus/i2sbus/i2sbus-core.c @@ -159,7 +159,7 @@ static int i2sbus_add_dev(struct macio_dev *macio, struct i2sbus_dev *dev; struct device_node *child = NULL, *sound = NULL; struct resource *r; - int i, layout = 0, rlen; + int i, layout = 0, rlen, ok = force; static const char *rnames[] = { "i2sbus: %s (control)", "i2sbus: %s (tx)", "i2sbus: %s (rx)" }; @@ -192,7 +192,7 @@ static int i2sbus_add_dev(struct macio_dev *macio, layout = *layout_id; snprintf(dev->sound.modalias, 32, "sound-layout-%d", layout); - force = 1; + ok = 1; } } /* for the time being, until we can handle non-layout-id @@ -201,7 +201,7 @@ static int i2sbus_add_dev(struct macio_dev *macio, * When there are two i2s busses and only one has a layout-id, * then this depends on the order, but that isn't important * either as the second one in that case is just a modem. */ - if (!force) { + if (!ok) { kfree(dev); return -ENODEV; } -- cgit v1.2.3