/* * arch/arm/plat-omap/include/mach/hardware.h * * Hardware definitions for TI OMAP processors and boards * * NOTE: Please put device driver specific defines into a separate header * file for each driver. * * Copyright (C) 2001 RidgeRun, Inc. * Author: RidgeRun, Inc. Greg Lonnon * * Reorganized for Linux-2.6 by Tony Lindgren * and Dirk Behme * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __ASM_ARCH_OMAP_HARDWARE_H #define __ASM_ARCH_OMAP_HARDWARE_H #include #ifndef __ASSEMBLER__ #include #include #endif #include /* * --------------------------------------------------------------------------- * Common definitions for all OMAP processors * NOTE: Put all processor or board specific parts to the special header * files. * --------------------------------------------------------------------------- */ /* * ---------------------------------------------------------------------------- * Timers * ---------------------------------------------------------------------------- */ #define OMAP_MPU_TIMER1_BASE (0xfffec500) #define OMAP_MPU_TIMER2_BASE (0xfffec600) #define OMAP_MPU_TIMER3_BASE (0xfffec700) #define MPU_TIMER_FREE (1 << 6) #define MPU_TIMER_CLOCK_ENABLE (1 << 5) #define MPU_TIMER_AR (1 << 1) #define MPU_TIMER_ST (1 << 0) /* * ---------------------------------------------------------------------------- * Clocks * ---------------------------------------------------------------------------- */ #define CLKGEN_REG_BASE (0xfffece00) #define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) #define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) #define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) #define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) #define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) #define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) #define ARM_SYSST (CLKGEN_REG_BASE + 0x18) #define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) #define CK_RATEF 1 #define CK_IDLEF 2 #define CK_ENABLEF 4 #define CK_SELECTF 8 #define SETARM_IDLE_SHIFT /* DPLL control registers */ #define DPLL_CTL (0xfffecf00) /* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ #define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) #define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) #define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) #define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) #define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) /* * --------------------------------------------------------------------------- * UPLD * --------------------------------------------------------------------------- */ #define ULPD_REG_BASE (0xfffe0800) #define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) #define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) #define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) # define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ # define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ #define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) # define SOFT_UDC_REQ (1 << 4) # define SOFT_USB_CLK_REQ (1 << 3) # define SOFT_DPLL_REQ (1 << 0) #define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) #define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) #define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) #define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) #define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) # define DIS_MMC2_DPLL_REQ (1 << 11) # define DIS_MMC1_DPLL_REQ (1 << 10) # define DIS_UART3_DPLL_REQ (1 << 9) # define DIS_UART2_DPLL_REQ (1 << 8) # define DIS_UART1_DPLL_REQ (1 << 7) # define DIS_USB_HOST_DPLL_REQ (1 << 6) #define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) #define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) /* * --------------------------------------------------------------------------- * Watchdog timer * --------------------------------------------------------------------------- */ /* Watchdog timer within the OMAP3.2 gigacell */ #define OMAP_MPU_WATCHDOG_BASE (0xfffec800) #define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) #define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) #define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) #define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) /* * --------------------------------------------------------------------------- * Interrupts * --------------------------------------------------------------------------- */ #ifdef CONFIG_ARCH_OMAP1 /* * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c * or something similar.. -- PFM. */ #define OMAP_IH1_BASE 0xfffecb00 #define OMAP_IH2_BASE 0xfffe0000 #define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) #define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) #define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) #define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) #define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) #define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) #define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) #define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) #define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) #define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) #define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) #define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) #define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) #define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) #define IRQ_ITR_REG_OFFSET 0x00 #define IRQ_MIR_REG_OFFSET 0x04 #define IRQ_SIR_IRQ_REG_OFFSET 0x10 #define IRQ_SIR_FIQ_REG_OFFSET 0x14 #define IRQ_CONTROL_REG_OFFSET 0x18 #define IRQ_ISR_REG_OFFSET 0x9c #define IRQ_ILR0_REG_OFFSET 0x1c #define IRQ_GMR_REG_OFFSET 0xa0 #endif /* * ---------------------------------------------------------------------------- * System control registers * ---------------------------------------------------------------------------- */ #define MOD_CONF_CTRL_0 0xfffe1080 #define MOD_CONF_CTRL_1 0xfffe1110 /* * ---------------------------------------------------------------------------- * Pin multiplexing registers * ---------------------------------------------------------------------------- */ #define FUNC_MUX_CTRL_0 0xfffe1000 #define FUNC_MUX_CTRL_1 0xfffe1004 #define FUNC_MUX_CTRL_2 0xfffe1008 #define COMP_MODE_CTRL_0 0xfffe100c #define FUNC_MUX_CTRL_3 0xfffe1010 #define FUNC_MUX_CTRL_4 0xfffe1014 #define FUNC_MUX_CTRL_5 0xfffe1018 #define FUNC_MUX_CTRL_6 0xfffe101C #define FUNC_MUX_CTRL_7 0xfffe1020 #define FUNC_MUX_CTRL_8 0xfffe1024 #define FUNC_MUX_CTRL_9 0xfffe1028 #define FUNC_MUX_CTRL_A 0xfffe102C #define FUNC_MUX_CTRL_B 0xfffe1030 #define FUNC_MUX_CTRL_C 0xfffe1034 #define FUNC_MUX_CTRL_D 0xfffe1038 #define PULL_DWN_CTRL_0 0xfffe1040 #define PULL_DWN_CTRL_1 0xfffe1044 #define PULL_DWN_CTRL_2 0xfffe1048 #define PULL_DWN_CTRL_3 0xfffe104c #define PULL_DWN_CTRL_4 0xfffe10ac /* OMAP-1610 specific multiplexing registers */ #define FUNC_MUX_CTRL_E 0xfffe1090 #define FUNC_MUX_CTRL_F 0xfffe1094 #define FUNC_MUX_CTRL_10 0xfffe1098 #define FUNC_MUX_CTRL_11 0xfffe109c #define FUNC_MUX_CTRL_12 0xfffe10a0 #define PU_PD_SEL_0 0xfffe10b4 #define PU_PD_SEL_1 0xfffe10b8 #define PU_PD_SEL_2 0xfffe10bc #define PU_PD_SEL_3 0xfffe10c0 #define PU_PD_SEL_4 0xfffe10c4 /* Timer32K for 1610 and 1710*/ #define OMAP_TIMER32K_BASE 0xFFFBC400 /* * --------------------------------------------------------------------------- * TIPB bus interface * --------------------------------------------------------------------------- */ #define TIPB_PUBLIC_CNTL_BASE 0xfffed300 #define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) #define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 #define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) /* * ---------------------------------------------------------------------------- * MPUI interface * ---------------------------------------------------------------------------- */ #define MPUI_BASE (0xfffec900) #define MPUI_CTRL (MPUI_BASE + 0x0) #define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) #define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) #define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) #define MPUI_STATUS_REG (MPUI_BASE + 0x10) #define MPUI_DSP_STATUS (MPUI_BASE + 0x14) #define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) #define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) /* * ---------------------------------------------------------------------------- * LED Pulse Generator * ---------------------------------------------------------------------------- */ #define OMAP_LPG1_BASE 0xfffbd000 #define OMAP_LPG2_BASE 0xfffbd800 #define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) #define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) #define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) #define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) /* * ---------------------------------------------------------------------------- * Pulse-Width Light * ---------------------------------------------------------------------------- */ #define OMAP_PWL_BASE 0xfffb5800 #define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) #define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) /* * --------------------------------------------------------------------------- * Processor specific defines * --------------------------------------------------------------------------- */ #include "omap730.h" #include "omap1510.h" #include "omap16xx.h" #include "omap24xx.h" #include "omap34xx.h" #ifndef __ASSEMBLER__ /* * --------------------------------------------------------------------------- * Board specific defines * --------------------------------------------------------------------------- */ #ifdef CONFIG_MACH_OMAP3_BEAGLE #include "board-omap3beagle.h" #endif #ifdef CONFIG_MACH_OMAP_LDP #include "board-ldp.h" #endif #ifdef CONFIG_MACH_VOICEBLUE #include "board-voiceblue.h" #endif #ifdef CONFIG_MACH_SX1 #include "board-sx1.h" #endif #endif /* !__ASSEMBLER__ */ #endif /* __ASM_ARCH_OMAP_HARDWARE_H */