/* * Utility functions for x86 operand and address decoding * * Copyright (C) Intel Corporation 2017 */ #include #include #include #include #include #include #include #include #include #include #include #undef pr_fmt #define pr_fmt(fmt) "insn: " fmt enum reg_type { REG_TYPE_RM = 0, REG_TYPE_REG, REG_TYPE_INDEX, REG_TYPE_BASE, }; /** * is_string_insn() - Determine if instruction is a string instruction * @insn: Instruction containing the opcode to inspect * * Returns: * * true if the instruction, determined by the opcode, is any of the * string instructions as defined in the Intel Software Development manual. * False otherwise. */ static bool is_string_insn(struct insn *insn) { insn_get_opcode(insn); /* All string instructions have a 1-byte opcode. */ if (insn->opcode.nbytes != 1) return false; switch (insn->opcode.bytes[0]) { case 0x6c ... 0x6f: /* INS, OUTS */ case 0xa4 ... 0xa7: /* MOVS, CMPS */ case 0xaa ... 0xaf: /* STOS, LODS, SCAS */ return true; default: return false; } } /** * insn_has_rep_prefix() - Determine if instruction has a REP prefix * @insn: Instruction containing the prefix to inspect * * Returns: * * true if the instruction has a REP prefix, false if not. */ bool insn_has_rep_prefix(struct insn *insn) { insn_byte_t p; int i; insn_get_prefixes(insn); for_each_insn_prefix(insn, i, p) { if (p == 0xf2 || p == 0xf3) return true; } return false; } /** * get_seg_reg_override_idx() - obtain segment register override index * @insn: Valid instruction with segment override prefixes * * Inspect the instruction prefixes in @insn and find segment overrides, if any. * * Returns: * * A constant identifying the segment register to use, among CS, SS, DS, * ES, FS, or GS. INAT_SEG_REG_DEFAULT is returned if no segment override * prefixes were found. * * -EINVAL in case of error. */ static int get_seg_reg_override_idx(struct insn *insn) { int idx = INAT_SEG_REG_DEFAULT; int num_overrides = 0, i; insn_byte_t p; insn_get_prefixes(insn); /* Look for any segment override prefixes. */ for_each_insn_prefix(insn, i, p) { insn_attr_t attr; attr = inat_get_opcode_attribute(p); switch (attr) { case INAT_MAKE_PREFIX(INAT_PFX_CS): idx = INAT_SEG_REG_CS; num_overrides++; break; case INAT_MAKE_PREFIX(INAT_PFX_SS): idx = INAT_SEG_REG_SS; num_overrides++; break; case INAT_MAKE_PREFIX(INAT_PFX_DS): idx = INAT_SEG_REG_DS; num_overrides++; break; case INAT_MAKE_PREFIX(INAT_PFX_ES): idx = INAT_SEG_REG_ES; num_overrides++; break; case INAT_MAKE_PREFIX(INAT_PFX_FS): idx = INAT_SEG_REG_FS; num_overrides++; break; case INAT_MAKE_PREFIX(INAT_PFX_GS): idx = INAT_SEG_REG_GS; num_overrides++; break; /* No default action needed. */ } } /* More than one segment override prefix leads to undefined behavior. */ if (num_overrides > 1) return -EINVAL; return idx; } /** * check_seg_overrides() - check if segment override prefixes are allowed * @insn: Valid instruction with segment override prefixes * @regoff: Operand offset, in pt_regs, for which the check is performed * * For a particular register used in register-indirect addressing, determine if * segment override prefixes can be used. Specifically, no overrides are allowed * for rDI if used with a string instruction. * * Returns: * * True if segment override prefixes can be used with the register indicated * in @regoff. False if otherwise. */ static bool check_seg_overrides(struct insn *insn, int regoff) { if (regoff == offsetof(struct pt_regs, di) && is_string_insn(insn)) return false; return true; } /** * resolve_default_seg() - resolve default segment register index for an operand * @insn: Instruction with opcode and address size. Must be valid. * @regs: Register values as seen when entering kernel mode * @off: Operand offset, in pt_regs, for which resolution is needed * * Resolve the default segment register index associated with the instruction * operand register indicated by @off. Such index is resolved based on defaults * described in the Intel Software Development Manual. * * Returns: * * If in protected mode, a constant identifying the segment register to use, * among CS, SS, ES or DS. If in long mode, INAT_SEG_REG_IGNORE. * * -EINVAL in case of error. */ static int resolve_default_seg(struct insn *insn, struct pt_regs *regs, int off) { if (any_64bit_mode(regs)) return INAT_SEG_REG_IGNORE; /* * Resolve the default segment register as described in Section 3.7.4 * of the Intel Software Development Manual Vol. 1: * * + DS for all references involving r[ABCD]X, and rSI. * + If used in a string instruction, ES for rDI. Otherwise, DS. * + AX, CX and DX are not valid register operands in 16-bit address * encodings but are valid for 32-bit and 64-bit encodings. * + -EDOM is reserved to identify for cases in which no register * is used (i.e., displacement-only addressing). Use DS. * + SS for rSP or rBP. * + CS for rIP. */ switch (off) { case offsetof(struct pt_regs, ax): case offsetof(struct pt_regs, cx): case offsetof(struct pt_regs, dx): /* Need insn to verify address size. */ if (insn->addr_bytes == 2) return -EINVAL; fallthrough; case -EDOM: case offsetof(struct pt_regs, bx): case offsetof(struct pt_regs, si): return INAT_SEG_REG_DS; case offsetof(struct pt_regs, di): if (is_string_insn(insn)) return INAT_SEG_REG_ES; return INAT_SEG_REG_DS; case offsetof(struct pt_regs, bp): case offsetof(struct pt_regs, sp): return INAT_SEG_REG_SS; case offsetof(struct pt_regs, ip): return INAT_SEG_REG_CS; default: return -EINVAL; } } /** * resolve_seg_reg() - obtain segment register index * @insn: Instruction with operands * @regs: Register values as seen when entering kernel mode * @regoff: Operand offset, in pt_regs, used to deterimine segment register * * Determine the segment register associated with the operands and, if * applicable, prefixes and the instruction pointed by @insn. * * The segment register associated to an operand used in register-indirect * addressing depends on: * * a) Whether running in long mode (in such a case segments are ignored, except * if FS or GS are used). * * b) Whether segment override prefixes can be used. Certain instructions and * registers do not allow override prefixes. * * c) Whether segment overrides prefixes are found in the instruction prefixes. * * d) If there are not segment override prefixes or they cannot be used, the * default segment register associated with the operand register is used. * * The function checks first if segment override prefixes can be used with the * operand indicated by @regoff. If allowed, obtain such overridden segment * register index. Lastly, if not prefixes were found or cannot be used, resolve * the segment register index to use based on the defaults described in the * Intel documentation. In long mode, all segment register indexes will be * ignored, except if overrides were found for FS or GS. All these operations * are done using helper functions. * * The operand register, @regoff, is represented as the offset from the base of * pt_regs. * * As stated, the main use of this function is to determine the segment register * index based on the instruction, its operands and prefixes. Hence, @insn * must be valid. However, if @regoff indicates rIP, we don't need to inspect * @insn at all as in this case CS is used in all cases. This case is checked * before proceeding further. * * Please note that this function does not return the value in the segment * register (i.e., the segment selector) but our defined index. The segment * selector needs to be obtained using get_segment_selector() and passing the * segment register index resolved by this function. * * Returns: * * An index identifying the segment register to use, among CS, SS, DS, * ES, FS, or GS. INAT_SEG_REG_IGNORE is returned if running in long mode. * * -EINVAL in case of error. */ static int resolve_seg_reg(struct insn *insn, struct pt_regs *regs, int regoff) { int idx; /* * In the unlikely event of having to resolve the segment register * index for rIP, do it first. Segment override prefixes should not * be used. Hence, it is not necessary to inspect the instruction, * which may be invalid at this point. */ if (regoff == offsetof(struct pt_regs, ip)) { if (any_64bit_mode(regs)) return INAT_SEG_REG_IGNORE; else return INAT_SEG_REG_CS; } if (!insn) return -EINVAL; if (!check_seg_overrides(insn, regoff)) return resolve_default_seg(insn, regs, regoff); idx = get_seg_reg_override_idx(insn); if (idx < 0) return idx; if (idx == INAT_SEG_REG_DEFAULT) return resolve_default_seg(insn, regs, regoff); /* * In long mode, segment override prefixes are ignored, except for * overrides for FS and GS. */ if (any_64bit_mode(regs)) { if (idx != INAT_SEG_REG_FS && idx != INAT_SEG_REG_GS) idx = INAT_SEG_REG_IGNORE; } return idx; } /** * get_segment_selector() - obtain segment selector * @regs: Register values as seen when entering kernel mode * @seg_reg_idx: Segment register index to use * * Obtain the segment selector from any of the CS, SS, DS, ES, FS, GS segment * registers. In CONFIG_X86_32, the segment is obtained from either pt_regs or * kernel_vm86_regs as applicable. In CONFIG_X86_64, CS and SS are obtained * from pt_regs. DS, ES, FS and GS are obtained by reading the actual CPU * registers. This done for only for completeness as in CONFIG_X86_64 segment * registers are ignored. * * Returns: * * Value of the segment selector, including null when running in * long mode. * * -EINVAL on error. */ static short get_segment_selector(struct pt_regs *regs, int seg_reg_idx) { #ifdef CONFIG_X86_64 unsigned short sel; switch (seg_reg_idx) { case INAT_SEG_REG_IGNORE: return 0; case INAT_SEG_REG_CS: return (unsigned short)(regs->cs & 0xffff); case INAT_SEG_REG_SS: return (unsigned short)(regs->ss & 0xffff); case INAT_SEG_REG_DS: savesegment(ds, sel); return sel; case INAT_SEG_REG_ES: savesegment(es, sel); return sel; case INAT_SEG_REG_FS: savesegment(fs, sel); return sel; case INAT_SEG_REG_GS: savesegment(gs, sel); return sel; default: return -EINVAL; } #else /* CONFIG_X86_32 */ struct kernel_vm86_regs *vm86regs = (struct kernel_vm86_regs *)regs; if (v8086_mode(regs)) { switch (seg_reg_idx) { case INAT_SEG_REG_CS: return (unsigned short)(regs->cs & 0xffff); case INAT_SEG_REG_SS: return (unsigned short)(regs->ss & 0xffff); case INAT_SEG_REG_DS: return vm86regs->ds; case INAT_SEG_REG_ES: return vm86regs->es; case INAT_SEG_REG_FS: return vm86regs->fs; case INAT_SEG_REG_GS: return vm86regs->gs; case INAT_SEG_REG_IGNORE: default: return -EINVAL; } } switch (seg_reg_idx) { case INAT_SEG_REG_CS: return (unsigned short)(regs->cs & 0xffff); case INAT_SEG_REG_SS: return (unsigned short)(regs->ss & 0xffff); case INAT_SEG_REG_DS: return (unsigned short)(regs->ds & 0xffff); case INAT_SEG_REG_ES: return (unsigned short)(regs->es & 0xffff); case INAT_SEG_REG_FS: return (unsigned short)(regs->fs & 0xffff); case INAT_SEG_REG_GS: return get_user_gs(regs); case INAT_SEG_REG_IGNORE: default: return -EINVAL; } #endif /* CONFIG_X86_64 */ } static int get_reg_offset(struct insn *insn, struct pt_regs *regs, enum reg_type type) { int regno = 0; static const int regoff[] = { offsetof(struct pt_regs, ax), offsetof(struct pt_regs, cx), offsetof(struct pt_regs, dx), offsetof(struct pt_regs, bx), offsetof(struct pt_regs, sp), offsetof(struct pt_regs, bp), offsetof(struct pt_regs, si), offsetof(struct pt_regs, di), #ifdef CONFIG_X86_64 offsetof(struct pt_regs, r8), offsetof(struct pt_regs, r9), offsetof(struct pt_regs, r10), offsetof(struct pt_regs, r11), offsetof(struct pt_regs, r12), offsetof(struct pt_regs, r13), offsetof(struct pt_regs, r14), offsetof(struct pt_regs, r15), #endif }; int nr_registers = ARRAY_SIZE(regoff); /* * Don't possibly decode a 32-bit instructions as * reading a 64-bit-only register. */ if (IS_ENABLED(CONFIG_X86_64) && !insn->x86_64) nr_registers -= 8; switch (type) { case REG_TYPE_RM: regno = X86_MODRM_RM(insn->modrm.value); /* * ModRM.mod == 0 and ModRM.rm == 5 means a 32-bit displacement * follows the ModRM byte. */ if (!X86_MODRM_MOD(insn->modrm.value) && regno == 5) return -EDOM; if (X86_REX_B(insn->rex_prefix.value)) regno += 8; break; case REG_TYPE_REG: regno = X86_MODRM_REG(insn->modrm.value); if (X86_REX_R(insn->rex_prefix.value)) regno += 8; break; case REG_TYPE_INDEX: regno = X86_SIB_INDEX(insn->sib.value); if (X86_REX_X(insn->rex_prefix.value)) regno += 8; /* * If ModRM.mod != 3 and SIB.index = 4 the scale*index * portion of the address computation is null. This is * true only if REX.X is 0. In such a case, the SIB index * is used in the address computation. */ if (X86_MODRM_MOD(insn->modrm.value) != 3 && regno == 4) return -EDOM; break; case REG_TYPE_BASE: regno = X86_SIB_BASE(insn->sib.value); /* * If ModRM.mod is 0 and SIB.base == 5, the base of the * register-indirect addressing is 0. In this case, a * 32-bit displacement follows the SIB byte. */ if (!X86_MODRM_MOD(insn->modrm.value) && regno == 5) return -EDOM; if (X86_REX_B(insn->rex_prefix.value)) regno += 8; break; default: pr_err_ratelimited("invalid register type: %d\n", type); return -EINVAL; } if (regno >= nr_registers) { WARN_ONCE(1, "decoded an instruction with an invalid register"); return -EINVAL; } return regoff[regno]; } /** * get_reg_offset_16() - Obtain offset of register indicated by instruction * @insn: Instruction containing ModRM byte * @regs: Register values as seen when entering kernel mode * @offs1: Offset of the first operand register * @offs2: Offset of the second opeand register, if applicable * * Obtain the offset, in pt_regs, of the registers indicated by the ModRM byte * in @insn. This function is to be used with 16-bit address encodings. The * @offs1 and @offs2 will be written with the offset of the two registers * indicated by the instruction. In cases where any of the registers is not * referenced by the instruction, the value will be set to -EDOM. * * Returns: * * 0 on success, -EINVAL on error. */ static int get_reg_offset_16(struct insn *insn, struct pt_regs *regs, int *offs1, int *offs2) { /* * 16-bit addressing can use one or two registers. Specifics of * encodings are given in Table 2-1. "16-Bit Addressing Forms with the * ModR/M Byte" of the Intel Software Development Manual. */ static const int regoff1[] = { offsetof(struct pt_regs, bx), offsetof(struct pt_regs, bx), offsetof(struct pt_regs, bp), offsetof(struct pt_regs, bp), offsetof(struct pt_regs, si), offsetof(struct pt_regs, di), offsetof(struct pt_regs, bp), offsetof(struct pt_regs, bx), }; static const int regoff2[] = { offsetof(struct pt_regs, si), offsetof(struct pt_regs, di), offsetof(struct pt_regs, si), offsetof(struct pt_regs, di), -EDOM, -EDOM, -EDOM, -EDOM, }; if (!offs1 || !offs2) return -EINVAL; /* Operand is a register, use the generic function. */ if (X86_MODRM_MOD(insn->modrm.value) == 3) { *offs1 = insn_get_modrm_rm_off(insn, regs); *offs2 = -EDOM; return 0; } *offs1 = regoff1[X86_MODRM_RM(insn->modrm.value)]; *offs2 = regoff2[X86_MODRM_RM(insn->modrm.value)]; /* * If ModRM.mod is 0 and ModRM.rm is 110b, then we use displacement- * only addressing. This means that no registers are involved in * computing the effective address. Thus, ensure that the first * register offset is invalild. The second register offset is already * invalid under the aforementioned conditions. */ if ((X86_MODRM_MOD(insn->modrm.value) == 0) && (X86_MODRM_RM(insn->modrm.value) == 6)) *offs1 = -EDOM; return 0; } /** * get_desc() - Obtain contents of a segment descriptor * @out: Segment descriptor contents on success * @sel: Segment selector * * Given a segment selector, obtain a pointer to the segment descriptor. * Both global and local descriptor tables are supported. * * Returns: * * True on success, false on failure. * * NULL on error. */ static bool get_desc(struct desc_struct *out, unsigned short sel) { struct desc_ptr gdt_desc = {0, 0}; unsigned long desc_base; #ifdef CONFIG_MODIFY_LDT_SYSCALL if ((sel & SEGMENT_TI_MASK) == SEGMENT_LDT) { bool success = false; struct ldt_struct *ldt; /* Bits [15:3] contain the index of the desired entry. */ sel >>= 3; mutex_lock(¤t->active_mm->context.lock); ldt = current->active_mm->context.ldt; if (ldt && sel < ldt->nr_entries) { *out = ldt->entries[sel]; success = true; } mutex_unlock(¤t->active_mm->context.lock); return success; } #endif native_store_gdt(&gdt_desc); /* * Segment descriptors have a size of 8 bytes. Thus, the index is * multiplied by 8 to obtain the memory offset of the desired descriptor * from the base of the GDT. As bits [15:3] of the segment selector * contain the index, it can be regarded as multiplied by 8 already. * All that remains is to clear bits [2:0]. */ desc_base = sel & ~(SEGMENT_RPL_MASK | SEGMENT_TI_MASK); if (desc_base > gdt_desc.size) return false; *out = *(struct desc_struct *)(gdt_desc.address + desc_base); return true; } /** * insn_get_seg_base() - Obtain base address of segment descriptor. * @regs: Register values as seen when entering kernel mode * @seg_reg_idx: Index of the segment register pointing to seg descriptor * * Obtain the base address of the segment as indicated by the segment descriptor * pointed by the segment selector. The segment selector is obtained from the * input segment register index @seg_reg_idx. * * Returns: * * In protected mode, base address of the segment. Zero in long mode, * except when FS or GS are used. In virtual-8086 mode, the segment * selector shifted 4 bits to the right. * * -1L in case of error. */ unsigned long insn_get_seg_base(struct pt_regs *regs, int seg_reg_idx) { struct desc_struct desc; short sel; sel = get_segment_selector(regs, seg_reg_idx); if (sel < 0) return -1L; if (v8086_mode(regs)) /* * Base is simply the segment selector shifted 4 * bits to the right. */ return (unsigned long)(sel << 4); if (any_64bit_mode(regs)) { /* * Only FS or GS will have a base address, the rest of * the segments' bases are forced to 0. */ unsigned long base; if (seg_reg_idx == INAT_SEG_REG_FS) { rdmsrl(MSR_FS_BASE, base); } else if (seg_reg_idx == INAT_SEG_REG_GS) { /* * swapgs was called at the kernel entry point. Thus, * MSR_KERNEL_GS_BASE will have the user-space GS base. */ if (user_mode(regs)) rdmsrl(MSR_KERNEL_GS_BASE, base); else rdmsrl(MSR_GS_BASE, base); } else { base = 0; } return base; } /* In protected mode the segment selector cannot be null. */ if (!sel) return -1L; if (!get_desc(&desc, sel)) return -1L; return get_desc_base(&desc); } /** * get_seg_limit() - Obtain the limit of a segment descriptor * @regs: Register values as seen when entering kernel mode * @seg_reg_idx: Index of the segment register pointing to seg descriptor * * Obtain the limit of the segment as indicated by the segment descriptor * pointed by the segment selector. The segment selector is obtained from the * input segment register index @seg_reg_idx. * * Returns: * * In protected mode, the limit of the segment descriptor in bytes. * In long mode and virtual-8086 mode, segment limits are not enforced. Thus, * limit is returned as -1L to imply a limit-less segment. * * Zero is returned on error. */ static unsigned long get_seg_limit(struct pt_regs *regs, int seg_reg_idx) { struct desc_struct desc; unsigned long limit; short sel; sel = get_segment_selector(regs, seg_reg_idx); if (sel < 0) return 0; if (any_64bit_mode(regs) || v8086_mode(regs)) return -1L; if (!sel) return 0; if (!get_desc(&desc, sel)) return 0; /* * If the granularity bit is set, the limit is given in multiples * of 4096. This also means that the 12 least significant bits are * not tested when checking the segment limits. In practice, * this means that the segment ends in (limit << 12) + 0xfff. */ limit = get_desc_limit(&desc); if (desc.g) limit = (limit << 12) + 0xfff; return limit; } /** * insn_get_code_seg_params() - Obtain code segment parameters * @regs: Structure with register values as seen when entering kernel mode * * Obtain address and operand sizes of the code segment. It is obtained from the * selector contained in the CS register in regs. In protected mode, the default * address is determined by inspecting the L and D bits of the segment * descriptor. In virtual-8086 mode, the default is always two bytes for both * address and operand sizes. * * Returns: * * An int containing ORed-in default parameters on success. * * -EINVAL on error. */ int insn_get_code_seg_params(struct pt_regs *regs) { struct desc_struct desc; short sel; if (v8086_mode(regs)) /* Address and operand size are both 16-bit. */ return INSN_CODE_SEG_PARAMS(2, 2); sel = get_segment_selector(regs, INAT_SEG_REG_CS); if (sel < 0) return sel; if (!get_desc(&desc, sel)) return -EINVAL; /* * The most significant byte of the Type field of the segment descriptor * determines whether a segment contains data or code. If this is a data * segment, return error. */ if (!(desc.type & BIT(3))) return -EINVAL; switch ((desc.l << 1) | desc.d) { case 0: /* * Legacy mode. CS.L=0, CS.D=0. Address and operand size are * both 16-bit. */ return INSN_CODE_SEG_PARAMS(2, 2); case 1: /* * Legacy mode. CS.L=0, CS.D=1. Address and operand size are * both 32-bit. */ return INSN_CODE_SEG_PARAMS(4, 4); case 2: /* * IA-32e 64-bit mode. CS.L=1, CS.D=0. Address size is 64-bit; * operand size is 32-bit. */ return INSN_CODE_SEG_PARAMS(4, 8); case 3: /* Invalid setting. CS.L=1, CS.D=1 */ fallthrough; default: return -EINVAL; } } /** * insn_get_modrm_rm_off() - Obtain register in r/m part of the ModRM byte * @insn: Instruction containing the ModRM byte * @regs: Register values as seen when entering kernel mode * * Returns: * * The register indicated by the r/m part of the ModRM byte. The * register is obtained as an offset from the base of pt_regs. In specific * cases, the returned value can be -EDOM to indicate that the particular value * of ModRM does not refer to a register and shall be ignored. */ int insn_get_modrm_rm_off(struct insn *insn, struct pt_regs *regs) { return get_reg_offset(insn, regs, REG_TYPE_RM); } /** * insn_get_modrm_reg_off() - Obtain register in reg part of the ModRM byte * @insn: Instruction containing the ModRM byte * @regs: Register values as seen when entering kernel mode * * Returns: * * The register indicated by the reg part of the ModRM byte. The * register is obtained as an offset from the base of pt_regs. */ int insn_get_modrm_reg_off(struct insn *insn, struct pt_regs *regs) { return get_reg_offset(insn, regs, REG_TYPE_REG); } /** * get_seg_base_limit() - obtain base address and limit of a segment * @insn: Instruction. Must be valid. * @regs: Register values as seen when entering kernel mode * @regoff: Operand offset, in pt_regs, used to resolve segment descriptor * @base: Obtained segment base * @limit: Obtained segment limit * * Obtain the base address and limit of the segment associated with the operand * @regoff and, if any or allowed, override prefixes in @insn. This function is * different from insn_get_seg_base() as the latter does not resolve the segment * associated with the instruction operand. If a limit is not needed (e.g., * when running in long mode), @limit can be NULL. * * Returns: * * 0 on success. @base and @limit will contain the base address and of the * resolved segment, respectively. * * -EINVAL on error. */ static int get_seg_base_limit(struct insn *insn, struct pt_regs *regs, int regoff, unsigned long *base, unsigned long *limit) { int seg_reg_idx; if (!base) return -EINVAL; seg_reg_idx = resolve_seg_reg(insn, regs, regoff); if (seg_reg_idx < 0) return seg_reg_idx; *base = insn_get_seg_base(regs, seg_reg_idx); if (*base == -1L) return -EINVAL; if (!limit) return 0; *limit = get_seg_limit(regs, seg_reg_idx); if (!(*limit)) return -EINVAL; return 0; } /** * get_eff_addr_reg() - Obtain effective address from register operand * @insn: Instruction. Must be valid. * @regs: Register values as seen when entering kernel mode * @regoff: Obtained operand offset, in pt_regs, with the effective address * @eff_addr: Obtained effective address * * Obtain the effective address stored in the register operand as indicated by * the ModRM byte. This function is to be used only with register addressing * (i.e., ModRM.mod is 3). The effective address is saved in @eff_addr. The * register operand, as an offset from the base of pt_regs, is saved in @regoff; * such offset can then be used to resolve the segment associated with the * operand. This function can be used with any of the supported address sizes * in x86. * * Returns: * * 0 on success. @eff_addr will have the effective address stored in the * operand indicated by ModRM. @regoff will have such operand as an offset from * the base of pt_regs. * * -EINVAL on error. */ static int get_eff_addr_reg(struct insn *insn, struct pt_regs *regs, int *regoff, long *eff_addr) { int ret; ret = insn_get_modrm(insn); if (ret) return ret; if (X86_MODRM_MOD(insn->modrm.value) != 3) return -EINVAL; *regoff = get_reg_offset(insn, regs, REG_TYPE_RM); if (*regoff < 0) return -EINVAL; /* Ignore bytes that are outside the address size. */ if (insn->addr_bytes == 2) *eff_addr = regs_get_register(regs, *regoff) & 0xffff; else if (insn->addr_bytes == 4) *eff_addr = regs_get_register(regs, *regoff) & 0xffffffff; else /* 64-bit address */ *eff_addr = regs_get_register(regs, *regoff); return 0; } /** * get_eff_addr_modrm() - Obtain referenced effective address via ModRM * @insn: Instruction. Must be valid. * @regs: Register values as seen when entering kernel mode * @regoff: Obtained operand offset, in pt_regs, associated with segment * @eff_addr: Obtained effective address * * Obtain the effective address referenced by the ModRM byte of @insn. After * identifying the registers involved in the register-indirect memory reference, * its value is obtained from the operands in @regs. The computed address is * stored @eff_addr. Also, the register operand that indicates the associated * segment is stored in @regoff, this parameter can later be used to determine * such segment. * * Returns: * * 0 on success. @eff_addr will have the referenced effective address. @regoff * will have a register, as an offset from the base of pt_regs, that can be used * to resolve the associated segment. * * -EINVAL on error. */ static int get_eff_addr_modrm(struct insn *insn, struct pt_regs *regs, int *regoff, long *eff_addr) { long tmp; int ret; if (insn->addr_bytes != 8 && insn->addr_bytes != 4) return -EINVAL; ret = insn_get_modrm(insn); if (ret) return ret; if (X86_MODRM_MOD(insn->modrm.value) > 2) return -EINVAL; *regoff = get_reg_offset(insn, regs, REG_TYPE_RM); /* * -EDOM means that we must ignore the address_offset. In such a case, * in 64-bit mode the effective address relative to the rIP of the * following instruction. */ if (*regoff == -EDOM) { if (any_64bit_mode(regs)) tmp = regs->ip + insn->length; else tmp = 0; } else if (*regoff < 0) { return -EINVAL; } else { tmp = regs_get_register(regs, *regoff); } if (insn->addr_bytes == 4) { int addr32 = (int)(tmp & 0xffffffff) + insn->displacement.value; *eff_addr = addr32 & 0xffffffff; } else { *eff_addr = tmp + insn->displacement.value; } return 0; } /** * get_eff_addr_modrm_16() - Obtain referenced effective address via ModRM * @insn: Instruction. Must be valid. * @regs: Register values as seen when entering kernel mode * @regoff: Obtained operand offset, in pt_regs, associated with segment * @eff_addr: Obtained effective address * * Obtain the 16-bit effective address referenced by the ModRM byte of @insn. * After identifying the registers involved in the register-indirect memory * reference, its value is obtained from the operands in @regs. The computed * address is stored @eff_addr. Also, the register operand that indicates * the associated segment is stored in @regoff, this parameter can later be used * to determine such segment. * * Returns: * * 0 on success. @eff_addr will have the referenced effective address. @regoff * will have a register, as an offset from the base of pt_regs, that can be used * to resolve the associated segment. * * -EINVAL on error. */ static int get_eff_addr_modrm_16(struct insn *insn, struct pt_regs *regs, int *regoff, short *eff_addr) { int addr_offset1, addr_offset2, ret; short addr1 = 0, addr2 = 0, displacement; if (insn->addr_bytes != 2) return -EINVAL; insn_get_modrm(insn); if (!insn->modrm.nbytes) return -EINVAL; if (X86_MODRM_MOD(insn->modrm.value) > 2) return -EINVAL; ret = get_reg_offset_16(insn, regs, &addr_offset1, &addr_offset2); if (ret < 0) return -EINVAL; /* * Don't fail on invalid offset values. They might be invalid because * they cannot be used for this particular value of ModRM. Instead, use * them in the computation only if they contain a valid value. */ if (addr_offset1 != -EDOM) addr1 = regs_get_register(regs, addr_offset1) & 0xffff; if (addr_offset2 != -EDOM) addr2 = regs_get_register(regs, addr_offset2) & 0xffff; displacement = insn->displacement.value & 0xffff; *eff_addr = addr1 + addr2 + displacement; /* * The first operand register could indicate to use of either SS or DS * registers to obtain the segment selector. The second operand * register can only indicate the use of DS. Thus, the first operand * will be used to obtain the segment selector. */ *regoff = addr_offset1; return 0; } /** * get_eff_addr_sib() - Obtain referenced effective address via SIB * @insn: Instruction. Must be valid. * @regs: Register values as seen when entering kernel mode * @regoff: Obtained operand offset, in pt_regs, associated with segment * @eff_addr: Obtained effective address * * Obtain the effective address referenced by the SIB byte of @insn. After * identifying the registers involved in the indexed, register-indirect memory * reference, its value is obtained from the operands in @regs. The computed * address is stored @eff_addr. Also, the register operand that indicates the * associated segment is stored in @regoff, this parameter can later be used to * determine such segment. * * Returns: * * 0 on success. @eff_addr will have the referenced effective address. * @base_offset will have a register, as an offset from the base of pt_regs, * that can be used to resolve the associated segment. * * Negative value on error. */ static int get_eff_addr_sib(struct insn *insn, struct pt_regs *regs, int *base_offset, long *eff_addr) { long base, indx; int indx_offset; int ret; if (insn->addr_bytes != 8 && insn->addr_bytes != 4) return -EINVAL; ret = insn_get_modrm(insn); if (ret) return ret; if (!insn->modrm.nbytes) return -EINVAL; if (X86_MODRM_MOD(insn->modrm.value) > 2) return -EINVAL; ret = insn_get_sib(insn); if (ret) return ret; if (!insn->sib.nbytes) return -EINVAL; *base_offset = get_reg_offset(insn, regs, REG_TYPE_BASE); indx_offset = get_reg_offset(insn, regs, REG_TYPE_INDEX); /* * Negative values in the base and index offset means an error when * decoding the SIB byte. Except -EDOM, which means that the registers * should not be used in the address computation. */ if (*base_offset == -EDOM) base = 0; else if (*base_offset < 0) return -EINVAL; else base = regs_get_register(regs, *base_offset); if (indx_offset == -EDOM) indx = 0; else if (indx_offset < 0) return -EINVAL; else indx = regs_get_register(regs, indx_offset); if (insn->addr_bytes == 4) { int addr32, base32, idx32; base32 = base & 0xffffffff; idx32 = indx & 0xffffffff; addr32 = base32 + idx32 * (1 << X86_SIB_SCALE(insn->sib.value)); addr32 += insn->displacement.value; *eff_addr = addr32 & 0xffffffff; } else { *eff_addr = base + indx * (1 << X86_SIB_SCALE(insn->sib.value)); *eff_addr += insn->displacement.value; } return 0; } /** * get_addr_ref_16() - Obtain the 16-bit address referred by instruction * @insn: Instruction containing ModRM byte and displacement * @regs: Register values as seen when entering kernel mode * * This function is to be used with 16-bit address encodings. Obtain the memory * address referred by the instruction's ModRM and displacement bytes. Also, the * segment used as base is determined by either any segment override prefixes in * @insn or the default segment of the registers involved in the address * computation. In protected mode, segment limits are enforced. * * Returns: * * Linear address referenced by the instruction operands on success. * * -1L on error. */ static void __user *get_addr_ref_16(struct insn *insn, struct pt_regs *regs) { unsigned long linear_addr = -1L, seg_base, seg_limit; int ret, regoff; short eff_addr; long tmp; if (insn_get_displacement(insn)) goto out; if (insn->addr_bytes != 2) goto out; if (X86_MODRM_MOD(insn->modrm.value) == 3) { ret = get_eff_addr_reg(insn, regs, ®off, &tmp); if (ret) goto out; eff_addr = tmp; } else { ret = get_eff_addr_modrm_16(insn, regs, ®off, &eff_addr); if (ret) goto out; } ret = get_seg_base_limit(insn, regs, regoff, &seg_base, &seg_limit); if (ret) goto out; /* * Before computing the linear address, make sure the effective address * is within the limits of the segment. In virtual-8086 mode, segment * limits are not enforced. In such a case, the segment limit is -1L to * reflect this fact. */ if ((unsigned long)(eff_addr & 0xffff) > seg_limit) goto out; linear_addr = (unsigned long)(eff_addr & 0xffff) + seg_base; /* Limit linear address to 20 bits */ if (v8086_mode(regs)) linear_addr &= 0xfffff; out: return (void __user *)linear_addr; } /** * get_addr_ref_32() - Obtain a 32-bit linear address * @insn: Instruction with ModRM, SIB bytes and displacement * @regs: Register values as seen when entering kernel mode * * This function is to be used with 32-bit address encodings to obtain the * linear memory address referred by the instruction's ModRM, SIB, * displacement bytes and segment base address, as applicable. If in protected * mode, segment limits are enforced. * * Returns: * * Linear address referenced by instruction and registers on success. * * -1L on error. */ static void __user *get_addr_ref_32(struct insn *insn, struct pt_regs *regs) { unsigned long linear_addr = -1L, seg_base, seg_limit; int eff_addr, regoff; long tmp; int ret; if (insn->addr_bytes != 4) goto out; if (X86_MODRM_MOD(insn->modrm.value) == 3) { ret = get_eff_addr_reg(insn, regs, ®off, &tmp); if (ret) goto out; eff_addr = tmp; } else { if (insn->sib.nbytes) { ret = get_eff_addr_sib(insn, regs, ®off, &tmp); if (ret) goto out; eff_addr = tmp; } else { ret = get_eff_addr_modrm(insn, regs, ®off, &tmp); if (ret) goto out; eff_addr = tmp; } } ret = get_seg_base_limit(insn, regs, regoff, &seg_base, &seg_limit); if (ret) goto out; /* * In protected mode, before computing the linear address, make sure * the effective address is within the limits of the segment. * 32-bit addresses can be used in long and virtual-8086 modes if an * address override prefix is used. In such cases, segment limits are * not enforced. When in virtual-8086 mode, the segment limit is -1L * to reflect this situation. * * After computed, the effective address is treated as an unsigned * quantity. */ if (!any_64bit_mode(regs) && ((unsigned int)eff_addr > seg_limit)) goto out; /* * Even though 32-bit address encodings are allowed in virtual-8086 * mode, the address range is still limited to [0x-0xffff]. */ if (v8086_mode(regs) && (eff_addr & ~0xffff)) goto out; /* * Data type long could be 64 bits in size. Ensure that our 32-bit * effective address is not sign-extended when computing the linear * address. */ linear_addr = (unsigned long)(eff_addr & 0xffffffff) + seg_base; /* Limit linear address to 20 bits */ if (v8086_mode(regs)) linear_addr &= 0xfffff; out: return (void __user *)linear_addr; } /** * get_addr_ref_64() - Obtain a 64-bit linear address * @insn: Instruction struct with ModRM and SIB bytes and displacement * @regs: Structure with register values as seen when entering kernel mode * * This function is to be used with 64-bit address encodings to obtain the * linear memory address referred by the instruction's ModRM, SIB, * displacement bytes and segment base address, as applicable. * * Returns: * * Linear address referenced by instruction and registers on success. * * -1L on error. */ #ifndef CONFIG_X86_64 static void __user *get_addr_ref_64(struct insn *insn, struct pt_regs *regs) { return (void __user *)-1L; } #else static void __user *get_addr_ref_64(struct insn *insn, struct pt_regs *regs) { unsigned long linear_addr = -1L, seg_base; int regoff, ret; long eff_addr; if (insn->addr_bytes != 8) goto out; if (X86_MODRM_MOD(insn->modrm.value) == 3) { ret = get_eff_addr_reg(insn, regs, ®off, &eff_addr); if (ret) goto out; } else { if (insn->sib.nbytes) { ret = get_eff_addr_sib(insn, regs, ®off, &eff_addr); if (ret) goto out; } else { ret = get_eff_addr_modrm(insn, regs, ®off, &eff_addr); if (ret) goto out; } } ret = get_seg_base_limit(insn, regs, regoff, &seg_base, NULL); if (ret) goto out; linear_addr = (unsigned long)eff_addr + seg_base; out: return (void __user *)linear_addr; } #endif /* CONFIG_X86_64 */ /** * insn_get_addr_ref() - Obtain the linear address referred by instruction * @insn: Instruction structure containing ModRM byte and displacement * @regs: Structure with register values as seen when entering kernel mode * * Obtain the linear address referred by the instruction's ModRM, SIB and * displacement bytes, and segment base, as applicable. In protected mode, * segment limits are enforced. * * Returns: * * Linear address referenced by instruction and registers on success. * * -1L on error. */ void __user *insn_get_addr_ref(struct insn *insn, struct pt_regs *regs) { if (!insn || !regs) return (void __user *)-1L; switch (insn->addr_bytes) { case 2: return get_addr_ref_16(insn, regs); case 4: return get_addr_ref_32(insn, regs); case 8: return get_addr_ref_64(insn, regs); default: return (void __user *)-1L; } } static unsigned long insn_get_effective_ip(struct pt_regs *regs) { unsigned long seg_base = 0; /* * If not in user-space long mode, a custom code segment could be in * use. This is true in protected mode (if the process defined a local * descriptor table), or virtual-8086 mode. In most of the cases * seg_base will be zero as in USER_CS. */ if (!user_64bit_mode(regs)) { seg_base = insn_get_seg_base(regs, INAT_SEG_REG_CS); if (seg_base == -1L) return 0; } return seg_base + regs->ip; } /** * insn_fetch_from_user() - Copy instruction bytes from user-space memory * @regs: Structure with register values as seen when entering kernel mode * @buf: Array to store the fetched instruction * * Gets the linear address of the instruction and copies the instruction bytes * to the buf. * * Returns: * * Number of instruction bytes copied. * * 0 if nothing was copied. */ int insn_fetch_from_user(struct pt_regs *regs, unsigned char buf[MAX_INSN_SIZE]) { unsigned long ip; int not_copied; ip = insn_get_effective_ip(regs); if (!ip) return 0; not_copied = copy_from_user(buf, (void __user *)ip, MAX_INSN_SIZE); return MAX_INSN_SIZE - not_copied; } /** * insn_fetch_from_user_inatomic() - Copy instruction bytes from user-space memory * while in atomic code * @regs: Structure with register values as seen when entering kernel mode * @buf: Array to store the fetched instruction * * Gets the linear address of the instruction and copies the instruction bytes * to the buf. This function must be used in atomic context. * * Returns: * * Number of instruction bytes copied. * * 0 if nothing was copied. */ int insn_fetch_from_user_inatomic(struct pt_regs *regs, unsigned char buf[MAX_INSN_SIZE]) { unsigned long ip; int not_copied; ip = insn_get_effective_ip(regs); if (!ip) return 0; not_copied = __copy_from_user_inatomic(buf, (void __user *)ip, MAX_INSN_SIZE); return MAX_INSN_SIZE - not_copied; } /** * insn_decode_from_regs() - Decode an instruction * @insn: Structure to store decoded instruction * @regs: Structure with register values as seen when entering kernel mode * @buf: Buffer containing the instruction bytes * @buf_size: Number of instruction bytes available in buf * * Decodes the instruction provided in buf and stores the decoding results in * insn. Also determines the correct address and operand sizes. * * Returns: * * True if instruction was decoded, False otherwise. */ bool insn_decode_from_regs(struct insn *insn, struct pt_regs *regs, unsigned char buf[MAX_INSN_SIZE], int buf_size) { int seg_defs; insn_init(insn, buf, buf_size, user_64bit_mode(regs)); /* * Override the default operand and address sizes with what is specified * in the code segment descriptor. The instruction decoder only sets * the address size it to either 4 or 8 address bytes and does nothing * for the operand bytes. This OK for most of the cases, but we could * have special cases where, for instance, a 16-bit code segment * descriptor is used. * If there is an address override prefix, the instruction decoder * correctly updates these values, even for 16-bit defaults. */ seg_defs = insn_get_code_seg_params(regs); if (seg_defs == -EINVAL) return false; insn->addr_bytes = INSN_CODE_SEG_ADDR_SZ(seg_defs); insn->opnd_bytes = INSN_CODE_SEG_OPND_SZ(seg_defs); if (insn_get_length(insn)) return false; if (buf_size < insn->length) return false; return true; }