/* * acpi_thermal.c - ACPI Thermal Zone Driver ($Revision: 41 $) * * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * * This driver fully implements the ACPI thermal policy as described in the * ACPI 2.0 Specification. * * TBD: 1. Implement passive cooling hysteresis. * 2. Enhance passive cooling (CPU) states/limit interface to support * concepts of 'multiple limiters', upper/lower limits, etc. * */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/dmi.h> #include <linux/init.h> #include <linux/types.h> #include <linux/proc_fs.h> #include <linux/timer.h> #include <linux/jiffies.h> #include <linux/kmod.h> #include <linux/seq_file.h> #include <linux/reboot.h> #include <asm/uaccess.h> #include <linux/thermal.h> #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> #define ACPI_THERMAL_CLASS "thermal_zone" #define ACPI_THERMAL_DEVICE_NAME "Thermal Zone" #define ACPI_THERMAL_FILE_STATE "state" #define ACPI_THERMAL_FILE_TEMPERATURE "temperature" #define ACPI_THERMAL_FILE_TRIP_POINTS "trip_points" #define ACPI_THERMAL_FILE_COOLING_MODE "cooling_mode" #define ACPI_THERMAL_FILE_POLLING_FREQ "polling_frequency" #define ACPI_THERMAL_NOTIFY_TEMPERATURE 0x80 #define ACPI_THERMAL_NOTIFY_THRESHOLDS 0x81 #define ACPI_THERMAL_NOTIFY_DEVICES 0x82 #define ACPI_THERMAL_NOTIFY_CRITICAL 0xF0 #define ACPI_THERMAL_NOTIFY_HOT 0xF1 #define ACPI_THERMAL_MODE_ACTIVE 0x00 #define ACPI_THERMAL_MAX_ACTIVE 10 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65 #define _COMPONENT ACPI_THERMAL_COMPONENT ACPI_MODULE_NAME("thermal"); MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI Thermal Zone Driver"); MODULE_LICENSE("GPL"); static int act; module_param(act, int, 0644); MODULE_PARM_DESC(act, "Disable or override all lowest active trip points."); static int crt; module_param(crt, int, 0644); MODULE_PARM_DESC(crt, "Disable or lower all critical trip points."); static int tzp; module_param(tzp, int, 0444); MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds."); static int nocrt; module_param(nocrt, int, 0); MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points."); static int off; module_param(off, int, 0); MODULE_PARM_DESC(off, "Set to disable ACPI thermal support."); static int psv; module_param(psv, int, 0644); MODULE_PARM_DESC(psv, "Disable or override all passive trip points."); static int acpi_thermal_add(struct acpi_device *device); static int acpi_thermal_remove(struct acpi_device *device, int type); static int acpi_thermal_resume(struct acpi_device *device); static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file); static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file); static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file); static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file); static ssize_t acpi_thermal_write_cooling_mode(struct file *, const char __user *, size_t, loff_t *); static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file); static ssize_t acpi_thermal_write_polling(struct file *, const char __user *, size_t, loff_t *); static const struct acpi_device_id thermal_device_ids[] = { {ACPI_THERMAL_HID, 0}, {"", 0}, }; MODULE_DEVICE_TABLE(acpi, thermal_device_ids); static struct acpi_driver acpi_thermal_driver = { .name = "thermal", .class = ACPI_THERMAL_CLASS, .ids = thermal_device_ids, .ops = { .add = acpi_thermal_add, .remove = acpi_thermal_remove, .resume = acpi_thermal_resume, }, }; struct acpi_thermal_state { u8 critical:1; u8 hot:1; u8 passive:1; u8 active:1; u8 reserved:4; int active_index; }; struct acpi_thermal_state_flags { u8 valid:1; u8 enabled:1; u8 reserved:6; }; struct acpi_thermal_critical { struct acpi_thermal_state_flags flags; unsigned long temperature; }; struct acpi_thermal_hot { struct acpi_thermal_state_flags flags; unsigned long temperature; }; struct acpi_thermal_passive { struct acpi_thermal_state_flags flags; unsigned long temperature; unsigned long tc1; unsigned long tc2; unsigned long tsp; struct acpi_handle_list devices; }; struct acpi_thermal_active { struct acpi_thermal_state_flags flags; unsigned long temperature; struct acpi_handle_list devices; }; struct acpi_thermal_trips { struct acpi_thermal_critical critical; struct acpi_thermal_hot hot; struct acpi_thermal_passive passive; struct acpi_thermal_active active[ACPI_THERMAL_MAX_ACTIVE]; }; struct acpi_thermal_flags { u8 cooling_mode:1; /* _SCP */ u8 devices:1; /* _TZD */ u8 reserved:6; }; struct acpi_thermal { struct acpi_device * device; acpi_bus_id name; unsigned long temperature; unsigned long last_temperature; unsigned long polling_frequency; volatile u8 zombie; struct acpi_thermal_flags flags; struct acpi_thermal_state state; struct acpi_thermal_trips trips; struct acpi_handle_list devices; struct timer_list timer; struct thermal_zone_device *thermal_zone; int tz_enabled; struct mutex lock; }; static const struct file_operations acpi_thermal_state_fops = { .owner = THIS_MODULE, .open = acpi_thermal_state_open_fs, .read = seq_read, .llseek = seq_lseek, .release = single_release, }; static const struct file_operations acpi_thermal_temp_fops = { .owner = THIS_MODULE, .open = acpi_thermal_temp_open_fs, .read = seq_read, .llseek = seq_lseek, .release = single_release, }; static const struct file_operations acpi_thermal_trip_fops = { .owner = THIS_MODULE, .open = acpi_thermal_trip_open_fs, .read = seq_read, .llseek = seq_lseek, .release = single_release, }; static const struct file_operations acpi_thermal_cooling_fops = { .owner = THIS_MODULE, .open = acpi_thermal_cooling_open_fs, .read = seq_read, .write = acpi_thermal_write_cooling_mode, .llseek = seq_lseek, .release = single_release, }; static const struct file_operations acpi_thermal_polling_fops = { .owner = THIS_MODULE, .open = acpi_thermal_polling_open_fs, .read = seq_read, .write = acpi_thermal_write_polling, .llseek = seq_lseek, .release = single_release, }; /* -------------------------------------------------------------------------- Thermal Zone Management -------------------------------------------------------------------------- */ static int acpi_thermal_get_temperature(struct acpi_thermal *tz) { acpi_status status = AE_OK; unsigned long long tmp; if (!tz) return -EINVAL; tz->last_temperature = tz->temperature; status = acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tmp); if (ACPI_FAILURE(status)) return -ENODEV; tz->temperature = tmp; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n", tz->temperature)); return 0; } static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz) { acpi_status status = AE_OK; unsigned long long tmp; if (!tz) return -EINVAL; status = acpi_evaluate_integer(tz->device->handle, "_TZP", NULL, &tmp); if (ACPI_FAILURE(status)) return -ENODEV; tz->polling_frequency = tmp; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n", tz->polling_frequency)); return 0; } static int acpi_thermal_set_polling(struct acpi_thermal *tz, int seconds) { if (!tz) return -EINVAL; tz->polling_frequency = seconds * 10; /* Convert value to deci-seconds */ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency set to %lu seconds\n", tz->polling_frequency/10)); return 0; } static int acpi_thermal_set_cooling_mode(struct acpi_thermal *tz, int mode) { acpi_status status = AE_OK; union acpi_object arg0 = { ACPI_TYPE_INTEGER }; struct acpi_object_list arg_list = { 1, &arg0 }; acpi_handle handle = NULL; if (!tz) return -EINVAL; status = acpi_get_handle(tz->device->handle, "_SCP", &handle); if (ACPI_FAILURE(status)) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "_SCP not present\n")); return -ENODEV; } arg0.integer.value = mode; status = acpi_evaluate_object(handle, NULL, &arg_list, NULL); if (ACPI_FAILURE(status)) return -ENODEV; return 0; } #define ACPI_TRIPS_CRITICAL 0x01 #define ACPI_TRIPS_HOT 0x02 #define ACPI_TRIPS_PASSIVE 0x04 #define ACPI_TRIPS_ACTIVE 0x08 #define ACPI_TRIPS_DEVICES 0x10 #define ACPI_TRIPS_REFRESH_THRESHOLDS (ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE) #define ACPI_TRIPS_REFRESH_DEVICES ACPI_TRIPS_DEVICES #define ACPI_TRIPS_INIT (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \ ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE | \ ACPI_TRIPS_DEVICES) /* * This exception is thrown out in two cases: * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid * when re-evaluating the AML code. * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change. * We need to re-bind the cooling devices of a thermal zone when this occurs. */ #define ACPI_THERMAL_TRIPS_EXCEPTION(flags, str) \ do { \ if (flags != ACPI_TRIPS_INIT) \ ACPI_EXCEPTION((AE_INFO, AE_ERROR, \ "ACPI thermal trip point %s changed\n" \ "Please send acpidump to linux-acpi@vger.kernel.org\n", str)); \ } while (0) static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) { acpi_status status = AE_OK; unsigned long long tmp; struct acpi_handle_list devices; int valid = 0; int i; /* Critical Shutdown (required) */ if (flag & ACPI_TRIPS_CRITICAL) { status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tmp); tz->trips.critical.temperature = tmp; /* * Treat freezing temperatures as invalid as well; some * BIOSes return really low values and cause reboots at startup. * Below zero (Celcius) values clearly aren't right for sure.. * ... so lets discard those as invalid. */ if (ACPI_FAILURE(status) || tz->trips.critical.temperature <= 2732) { tz->trips.critical.flags.valid = 0; ACPI_EXCEPTION((AE_INFO, status, "No or invalid critical threshold")); return -ENODEV; } else { tz->trips.critical.flags.valid = 1; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found critical threshold [%lu]\n", tz->trips.critical.temperature)); } if (tz->trips.critical.flags.valid == 1) { if (crt == -1) { tz->trips.critical.flags.valid = 0; } else if (crt > 0) { unsigned long crt_k = CELSIUS_TO_KELVIN(crt); /* * Allow override critical threshold */ if (crt_k > tz->trips.critical.temperature) printk(KERN_WARNING PREFIX "Critical threshold %d C\n", crt); tz->trips.critical.temperature = crt_k; } } } /* Critical Sleep (optional) */ if (flag & ACPI_TRIPS_HOT) { status = acpi_evaluate_integer(tz->device->handle, "_HOT", NULL, &tmp); if (ACPI_FAILURE(status)) { tz->trips.hot.flags.valid = 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No hot threshold\n")); } else { tz->trips.hot.temperature = tmp; tz->trips.hot.flags.valid = 1; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found hot threshold [%lu]\n", tz->trips.critical.temperature)); } } /* Passive (optional) */ if (flag & ACPI_TRIPS_PASSIVE) { valid = tz->trips.passive.flags.valid; if (psv == -1) { status = AE_SUPPORT; } else if (psv > 0) { tmp = CELSIUS_TO_KELVIN(psv); status = AE_OK; } else { status = acpi_evaluate_integer(tz->device->handle, "_PSV", NULL, &tmp); } if (ACPI_FAILURE(status)) tz->trips.passive.flags.valid = 0; else { tz->trips.passive.temperature = tmp; tz->trips.passive.flags.valid = 1; if (flag == ACPI_TRIPS_INIT) { status = acpi_evaluate_integer( tz->device->handle, "_TC1", NULL, &tmp); if (ACPI_FAILURE(status)) tz->trips.passive.flags.valid = 0; else tz->trips.passive.tc1 = tmp; status = acpi_evaluate_integer( tz->device->handle, "_TC2", NULL, &tmp); if (ACPI_FAILURE(status)) tz->trips.passive.flags.valid = 0; else tz->trips.passive.tc2 = tmp; status = acpi_evaluate_integer( tz->device->handle, "_TSP", NULL, &tmp); if (ACPI_FAILURE(status)) tz->trips.passive.flags.valid = 0; else tz->trips.passive.tsp = tmp; } } } if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) { memset(&devices, 0, sizeof(struct acpi_handle_list)); status = acpi_evaluate_reference(tz->device->handle, "_PSL", NULL, &devices); if (ACPI_FAILURE(status)) tz->trips.passive.flags.valid = 0; else tz->trips.passive.flags.valid = 1; if (memcmp(&tz->trips.passive.devices, &devices, sizeof(struct acpi_handle_list))) { memcpy(&tz->trips.passive.devices, &devices, sizeof(struct acpi_handle_list)); ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device"); } } if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) { if (valid != tz->trips.passive.flags.valid) ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state"); } /* Active (optional) */ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { char name[5] = { '_', 'A', 'C', ('0' + i), '\0' }; valid = tz->trips.active[i].flags.valid; if (act == -1) break; /* disable all active trip points */ if (flag & ACPI_TRIPS_ACTIVE) { status = acpi_evaluate_integer(tz->device->handle, name, NULL, &tmp); if (ACPI_FAILURE(status)) { tz->trips.active[i].flags.valid = 0; if (i == 0) break; if (act <= 0) break; if (i == 1) tz->trips.active[0].temperature = CELSIUS_TO_KELVIN(act); else /* * Don't allow override higher than * the next higher trip point */ tz->trips.active[i - 1].temperature = (tz->trips.active[i - 2].temperature < CELSIUS_TO_KELVIN(act) ? tz->trips.active[i - 2].temperature : CELSIUS_TO_KELVIN(act)); break; } else { tz->trips.active[i].temperature = tmp; tz->trips.active[i].flags.valid = 1; } } name[2] = 'L'; if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.active[i].flags.valid ) { memset(&devices, 0, sizeof(struct acpi_handle_list)); status = acpi_evaluate_reference(tz->device->handle, name, NULL, &devices); if (ACPI_FAILURE(status)) tz->trips.active[i].flags.valid = 0; else tz->trips.active[i].flags.valid = 1; if (memcmp(&tz->trips.active[i].devices, &devices, sizeof(struct acpi_handle_list))) { memcpy(&tz->trips.active[i].devices, &devices, sizeof(struct acpi_handle_list)); ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device"); } } if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES)) if (valid != tz->trips.active[i].flags.valid) ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state"); if (!tz->trips.active[i].flags.valid) break; } if (flag & ACPI_TRIPS_DEVICES) { memset(&devices, 0, sizeof(struct acpi_handle_list)); status = acpi_evaluate_reference(tz->device->handle, "_TZD", NULL, &devices); if (memcmp(&tz->devices, &devices, sizeof(struct acpi_handle_list))) { memcpy(&tz->devices, &devices, sizeof(struct acpi_handle_list)); ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device"); } } return 0; } static int acpi_thermal_get_trip_points(struct acpi_thermal *tz) { return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT); } static int acpi_thermal_critical(struct acpi_thermal *tz) { if (!tz || !tz->trips.critical.flags.valid) return -EINVAL; if (tz->temperature >= tz->trips.critical.temperature) { printk(KERN_WARNING PREFIX "Critical trip point\n"); tz->trips.critical.flags.enabled = 1; } else if (tz->trips.critical.flags.enabled) tz->trips.critical.flags.enabled = 0; acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, tz->device->dev.bus_id, ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); /* take no action if nocrt is set */ if(!nocrt) { printk(KERN_EMERG "Critical temperature reached (%ld C), shutting down.\n", KELVIN_TO_CELSIUS(tz->temperature)); orderly_poweroff(true); } return 0; } static int acpi_thermal_hot(struct acpi_thermal *tz) { if (!tz || !tz->trips.hot.flags.valid) return -EINVAL; if (tz->temperature >= tz->trips.hot.temperature) { printk(KERN_WARNING PREFIX "Hot trip point\n"); tz->trips.hot.flags.enabled = 1; } else if (tz->trips.hot.flags.enabled) tz->trips.hot.flags.enabled = 0; acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, tz->device->dev.bus_id, ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); /* TBD: Call user-mode "sleep(S4)" function if nocrt is cleared */ return 0; } static void acpi_thermal_passive(struct acpi_thermal *tz) { int result = 1; struct acpi_thermal_passive *passive = NULL; int trend = 0; int i = 0; if (!tz || !tz->trips.passive.flags.valid) return; passive = &(tz->trips.passive); /* * Above Trip? * ----------- * Calculate the thermal trend (using the passive cooling equation) * and modify the performance limit for all passive cooling devices * accordingly. Note that we assume symmetry. */ if (tz->temperature >= passive->temperature) { trend = (passive->tc1 * (tz->temperature - tz->last_temperature)) + (passive->tc2 * (tz->temperature - passive->temperature)); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "trend[%d]=(tc1[%lu]*(tmp[%lu]-last[%lu]))+(tc2[%lu]*(tmp[%lu]-psv[%lu]))\n", trend, passive->tc1, tz->temperature, tz->last_temperature, passive->tc2, tz->temperature, passive->temperature)); passive->flags.enabled = 1; /* Heating up? */ if (trend > 0) for (i = 0; i < passive->devices.count; i++) acpi_processor_set_thermal_limit(passive-> devices. handles[i], ACPI_PROCESSOR_LIMIT_INCREMENT); /* Cooling off? */ else if (trend < 0) { for (i = 0; i < passive->devices.count; i++) /* * assume that we are on highest * freq/lowest thrott and can leave * passive mode, even in error case */ if (!acpi_processor_set_thermal_limit (passive->devices.handles[i], ACPI_PROCESSOR_LIMIT_DECREMENT)) result = 0; /* * Leave cooling mode, even if the temp might * higher than trip point This is because some * machines might have long thermal polling * frequencies (tsp) defined. We will fall back * into passive mode in next cycle (probably quicker) */ if (result) { passive->flags.enabled = 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabling passive cooling, still above threshold," " but we are cooling down\n")); } } return; } /* * Below Trip? * ----------- * Implement passive cooling hysteresis to slowly increase performance * and avoid thrashing around the passive trip point. Note that we * assume symmetry. */ if (!passive->flags.enabled) return; for (i = 0; i < passive->devices.count; i++) if (!acpi_processor_set_thermal_limit (passive->devices.handles[i], ACPI_PROCESSOR_LIMIT_DECREMENT)) result = 0; if (result) { passive->flags.enabled = 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabling passive cooling (zone is cool)\n")); } } static void acpi_thermal_active(struct acpi_thermal *tz) { int result = 0; struct acpi_thermal_active *active = NULL; int i = 0; int j = 0; unsigned long maxtemp = 0; if (!tz) return; for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { active = &(tz->trips.active[i]); if (!active || !active->flags.valid) break; if (tz->temperature >= active->temperature) { /* * Above Threshold? * ---------------- * If not already enabled, turn ON all cooling devices * associated with this active threshold. */ if (active->temperature > maxtemp) tz->state.active_index = i; maxtemp = active->temperature; if (active->flags.enabled) continue; for (j = 0; j < active->devices.count; j++) { result = acpi_bus_set_power(active->devices. handles[j], ACPI_STATE_D0); if (result) { printk(KERN_WARNING PREFIX "Unable to turn cooling device [%p] 'on'\n", active->devices. handles[j]); continue; } active->flags.enabled = 1; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Cooling device [%p] now 'on'\n", active->devices.handles[j])); } continue; } if (!active->flags.enabled) continue; /* * Below Threshold? * ---------------- * Turn OFF all cooling devices associated with this * threshold. */ for (j = 0; j < active->devices.count; j++) { result = acpi_bus_set_power(active->devices.handles[j], ACPI_STATE_D3); if (result) { printk(KERN_WARNING PREFIX "Unable to turn cooling device [%p] 'off'\n", active->devices.handles[j]); continue; } active->flags.enabled = 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Cooling device [%p] now 'off'\n", active->devices.handles[j])); } } } static void acpi_thermal_check(void *context); static void acpi_thermal_run(unsigned long data) { struct acpi_thermal *tz = (struct acpi_thermal *)data; if (!tz->zombie) acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data); } static void acpi_thermal_active_off(void *data) { int result = 0; struct acpi_thermal *tz = data; int i = 0; int j = 0; struct acpi_thermal_active *active = NULL; if (!tz) { printk(KERN_ERR PREFIX "Invalid (NULL) context\n"); return; } result = acpi_thermal_get_temperature(tz); if (result) return; for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { active = &(tz->trips.active[i]); if (!active || !active->flags.valid) break; if (tz->temperature >= active->temperature) { /* * If the thermal temperature is greater than the * active threshod, unnecessary to turn off the * the active cooling device. */ continue; } /* * Below Threshold? * ---------------- * Turn OFF all cooling devices associated with this * threshold. */ for (j = 0; j < active->devices.count; j++) result = acpi_bus_set_power(active->devices.handles[j], ACPI_STATE_D3); } } static void acpi_thermal_check(void *data) { int result = 0; struct acpi_thermal *tz = data; unsigned long sleep_time = 0; unsigned long timeout_jiffies = 0; int i = 0; struct acpi_thermal_state state; if (!tz) { printk(KERN_ERR PREFIX "Invalid (NULL) context\n"); return; } /* Check if someone else is already running */ if (!mutex_trylock(&tz->lock)) return; state = tz->state; result = acpi_thermal_get_temperature(tz); if (result) goto unlock; if (!tz->tz_enabled) goto unlock; memset(&tz->state, 0, sizeof(tz->state)); /* * Check Trip Points * ----------------- * Compare the current temperature to the trip point values to see * if we've entered one of the thermal policy states. Note that * this function determines when a state is entered, but the * individual policy decides when it is exited (e.g. hysteresis). */ if (tz->trips.critical.flags.valid) state.critical |= (tz->temperature >= tz->trips.critical.temperature); if (tz->trips.hot.flags.valid) state.hot |= (tz->temperature >= tz->trips.hot.temperature); if (tz->trips.passive.flags.valid) state.passive |= (tz->temperature >= tz->trips.passive.temperature); for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) if (tz->trips.active[i].flags.valid) state.active |= (tz->temperature >= tz->trips.active[i].temperature); /* * Invoke Policy * ------------- * Separated from the above check to allow individual policy to * determine when to exit a given state. */ if (state.critical) acpi_thermal_critical(tz); if (state.hot) acpi_thermal_hot(tz); if (state.passive) acpi_thermal_passive(tz); if (state.active) acpi_thermal_active(tz); /* * Calculate State * --------------- * Again, separated from the above two to allow independent policy * decisions. */ tz->state.critical = tz->trips.critical.flags.enabled; tz->state.hot = tz->trips.hot.flags.enabled; tz->state.passive = tz->trips.passive.flags.enabled; tz->state.active = 0; for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) tz->state.active |= tz->trips.active[i].flags.enabled; /* * Calculate Sleep Time * -------------------- * If we're in the passive state, use _TSP's value. Otherwise * use the default polling frequency (e.g. _TZP). If no polling * frequency is specified then we'll wait forever (at least until * a thermal event occurs). Note that _TSP and _TZD values are * given in 1/10th seconds (we must covert to milliseconds). */ if (tz->state.passive) { sleep_time = tz->trips.passive.tsp * 100; timeout_jiffies = jiffies + (HZ * sleep_time) / 1000; } else if (tz->polling_frequency > 0) { sleep_time = tz->polling_frequency * 100; timeout_jiffies = round_jiffies(jiffies + (HZ * sleep_time) / 1000); } ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: temperature[%lu] sleep[%lu]\n", tz->name, tz->temperature, sleep_time)); /* * Schedule Next Poll * ------------------ */ if (!sleep_time) { if (timer_pending(&(tz->timer))) del_timer(&(tz->timer)); } else { if (timer_pending(&(tz->timer))) mod_timer(&(tz->timer), timeout_jiffies); else { tz->timer.data = (unsigned long)tz; tz->timer.function = acpi_thermal_run; tz->timer.expires = timeout_jiffies; add_timer(&(tz->timer)); } } unlock: mutex_unlock(&tz->lock); } /* sys I/F for generic thermal sysfs support */ #define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200) static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf) { struct acpi_thermal *tz = thermal->devdata; int result; if (!tz) return -EINVAL; result = acpi_thermal_get_temperature(tz); if (result) return result; return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(tz->temperature)); } static const char enabled[] = "kernel"; static const char disabled[] = "user"; static int thermal_get_mode(struct thermal_zone_device *thermal, char *buf) { struct acpi_thermal *tz = thermal->devdata; if (!tz) return -EINVAL; return sprintf(buf, "%s\n", tz->tz_enabled ? enabled : disabled); } static int thermal_set_mode(struct thermal_zone_device *thermal, const char *buf) { struct acpi_thermal *tz = thermal->devdata; int enable; if (!tz) return -EINVAL; /* * enable/disable thermal management from ACPI thermal driver */ if (!strncmp(buf, enabled, sizeof enabled - 1)) enable = 1; else if (!strncmp(buf, disabled, sizeof disabled - 1)) enable = 0; else return -EINVAL; if (enable != tz->tz_enabled) { tz->tz_enabled = enable; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s ACPI thermal control\n", tz->tz_enabled ? enabled : disabled)); acpi_thermal_check(tz); } return 0; } static int thermal_get_trip_type(struct thermal_zone_device *thermal, int trip, char *buf) { struct acpi_thermal *tz = thermal->devdata; int i; if (!tz || trip < 0) return -EINVAL; if (tz->trips.critical.flags.valid) { if (!trip) return sprintf(buf, "critical\n"); trip--; } if (tz->trips.hot.flags.valid) { if (!trip) return sprintf(buf, "hot\n"); trip--; } if (tz->trips.passive.flags.valid) { if (!trip) return sprintf(buf, "passive\n"); trip--; } for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->trips.active[i].flags.valid; i++) { if (!trip) return sprintf(buf, "active%d\n", i); trip--; } return -EINVAL; } static int thermal_get_trip_temp(struct thermal_zone_device *thermal, int trip, char *buf) { struct acpi_thermal *tz = thermal->devdata; int i; if (!tz || trip < 0) return -EINVAL; if (tz->trips.critical.flags.valid) { if (!trip) return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS( tz->trips.critical.temperature)); trip--; } if (tz->trips.hot.flags.valid) { if (!trip) return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS( tz->trips.hot.temperature)); trip--; } if (tz->trips.passive.flags.valid) { if (!trip) return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS( tz->trips.passive.temperature)); trip--; } for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->trips.active[i].flags.valid; i++) { if (!trip) return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS( tz->trips.active[i].temperature)); trip--; } return -EINVAL; } static int thermal_get_crit_temp(struct thermal_zone_device *thermal, unsigned long *temperature) { struct acpi_thermal *tz = thermal->devdata; if (tz->trips.critical.flags.valid) { *temperature = KELVIN_TO_MILLICELSIUS( tz->trips.critical.temperature); return 0; } else return -EINVAL; } typedef int (*cb)(struct thermal_zone_device *, int, struct thermal_cooling_device *); static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, struct thermal_cooling_device *cdev, cb action) { struct acpi_device *device = cdev->devdata; struct acpi_thermal *tz = thermal->devdata; struct acpi_device *dev; acpi_status status; acpi_handle handle; int i; int j; int trip = -1; int result = 0; if (tz->trips.critical.flags.valid) trip++; if (tz->trips.hot.flags.valid) trip++; if (tz->trips.passive.flags.valid) { trip++; for (i = 0; i < tz->trips.passive.devices.count; i++) { handle = tz->trips.passive.devices.handles[i]; status = acpi_bus_get_device(handle, &dev); if (ACPI_SUCCESS(status) && (dev == device)) { result = action(thermal, trip, cdev); if (result) goto failed; } } } for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { if (!tz->trips.active[i].flags.valid) break; trip++; for (j = 0; j < tz->trips.active[i].devices.count; j++) { handle = tz->trips.active[i].devices.handles[j]; status = acpi_bus_get_device(handle, &dev); if (ACPI_SUCCESS(status) && (dev == device)) { result = action(thermal, trip, cdev); if (result) goto failed; } } } for (i = 0; i < tz->devices.count; i++) { handle = tz->devices.handles[i]; status = acpi_bus_get_device(handle, &dev); if (ACPI_SUCCESS(status) && (dev == device)) { result = action(thermal, -1, cdev); if (result) goto failed; } } failed: return result; } static int acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal, struct thermal_cooling_device *cdev) { return acpi_thermal_cooling_device_cb(thermal, cdev, thermal_zone_bind_cooling_device); } static int acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal, struct thermal_cooling_device *cdev) { return acpi_thermal_cooling_device_cb(thermal, cdev, thermal_zone_unbind_cooling_device); } static struct thermal_zone_device_ops acpi_thermal_zone_ops = { .bind = acpi_thermal_bind_cooling_device, .unbind = acpi_thermal_unbind_cooling_device, .get_temp = thermal_get_temp, .get_mode = thermal_get_mode, .set_mode = thermal_set_mode, .get_trip_type = thermal_get_trip_type, .get_trip_temp = thermal_get_trip_temp, .get_crit_temp = thermal_get_crit_temp, }; static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) { int trips = 0; int result; acpi_status status; int i; if (tz->trips.critical.flags.valid) trips++; if (tz->trips.hot.flags.valid) trips++; if (tz->trips.passive.flags.valid) trips++; for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->trips.active[i].flags.valid; i++, trips++); tz->thermal_zone = thermal_zone_device_register("acpitz", trips, tz, &acpi_thermal_zone_ops); if (IS_ERR(tz->thermal_zone)) return -ENODEV; result = sysfs_create_link(&tz->device->dev.kobj, &tz->thermal_zone->device.kobj, "thermal_zone"); if (result) return result; result = sysfs_create_link(&tz->thermal_zone->device.kobj, &tz->device->dev.kobj, "device"); if (result) return result; status = acpi_attach_data(tz->device->handle, acpi_bus_private_data_handler, tz->thermal_zone); if (ACPI_FAILURE(status)) { printk(KERN_ERR PREFIX "Error attaching device data\n"); return -ENODEV; } tz->tz_enabled = 1; dev_info(&tz->device->dev, "registered as thermal_zone%d\n", tz->thermal_zone->id); return 0; } static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz) { sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone"); sysfs_remove_link(&tz->thermal_zone->device.kobj, "device"); thermal_zone_device_unregister(tz->thermal_zone); tz->thermal_zone = NULL; acpi_detach_data(tz->device->handle, acpi_bus_private_data_handler); } /* -------------------------------------------------------------------------- FS Interface (/proc) -------------------------------------------------------------------------- */ static struct proc_dir_entry *acpi_thermal_dir; static int acpi_thermal_state_seq_show(struct seq_file *seq, void *offset) { struct acpi_thermal *tz = seq->private; if (!tz) goto end; seq_puts(seq, "state: "); if (!tz->state.critical && !tz->state.hot && !tz->state.passive && !tz->state.active) seq_puts(seq, "ok\n"); else { if (tz->state.critical) seq_puts(seq, "critical "); if (tz->state.hot) seq_puts(seq, "hot "); if (tz->state.passive) seq_puts(seq, "passive "); if (tz->state.active) seq_printf(seq, "active[%d]", tz->state.active_index); seq_puts(seq, "\n"); } end: return 0; } static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file) { return single_open(file, acpi_thermal_state_seq_show, PDE(inode)->data); } static int acpi_thermal_temp_seq_show(struct seq_file *seq, void *offset) { int result = 0; struct acpi_thermal *tz = seq->private; if (!tz) goto end; result = acpi_thermal_get_temperature(tz); if (result) goto end; seq_printf(seq, "temperature: %ld C\n", KELVIN_TO_CELSIUS(tz->temperature)); end: return 0; } static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file) { return single_open(file, acpi_thermal_temp_seq_show, PDE(inode)->data); } static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset) { struct acpi_thermal *tz = seq->private; struct acpi_device *device; acpi_status status; int i = 0; int j = 0; if (!tz) goto end; if (tz->trips.critical.flags.valid) seq_printf(seq, "critical (S5): %ld C%s", KELVIN_TO_CELSIUS(tz->trips.critical.temperature), nocrt ? " <disabled>\n" : "\n"); if (tz->trips.hot.flags.valid) seq_printf(seq, "hot (S4): %ld C%s", KELVIN_TO_CELSIUS(tz->trips.hot.temperature), nocrt ? " <disabled>\n" : "\n"); if (tz->trips.passive.flags.valid) { seq_printf(seq, "passive: %ld C: tc1=%lu tc2=%lu tsp=%lu devices=", KELVIN_TO_CELSIUS(tz->trips.passive.temperature), tz->trips.passive.tc1, tz->trips.passive.tc2, tz->trips.passive.tsp); for (j = 0; j < tz->trips.passive.devices.count; j++) { status = acpi_bus_get_device(tz->trips.passive.devices. handles[j], &device); seq_printf(seq, "%4.4s ", status ? "" : acpi_device_bid(device)); } seq_puts(seq, "\n"); } for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { if (!(tz->trips.active[i].flags.valid)) break; seq_printf(seq, "active[%d]: %ld C: devices=", i, KELVIN_TO_CELSIUS(tz->trips.active[i].temperature)); for (j = 0; j < tz->trips.active[i].devices.count; j++){ status = acpi_bus_get_device(tz->trips.active[i]. devices.handles[j], &device); seq_printf(seq, "%4.4s ", status ? "" : acpi_device_bid(device)); } seq_puts(seq, "\n"); } end: return 0; } static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file) { return single_open(file, acpi_thermal_trip_seq_show, PDE(inode)->data); } static int acpi_thermal_cooling_seq_show(struct seq_file *seq, void *offset) { struct acpi_thermal *tz = seq->private; if (!tz) goto end; if (!tz->flags.cooling_mode) seq_puts(seq, "<setting not supported>\n"); else seq_puts(seq, "0 - Active; 1 - Passive\n"); end: return 0; } static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file) { return single_open(file, acpi_thermal_cooling_seq_show, PDE(inode)->data); } static ssize_t acpi_thermal_write_cooling_mode(struct file *file, const char __user * buffer, size_t count, loff_t * ppos) { struct seq_file *m = file->private_data; struct acpi_thermal *tz = m->private; int result = 0; char mode_string[12] = { '\0' }; if (!tz || (count > sizeof(mode_string) - 1)) return -EINVAL; if (!tz->flags.cooling_mode) return -ENODEV; if (copy_from_user(mode_string, buffer, count)) return -EFAULT; mode_string[count] = '\0'; result = acpi_thermal_set_cooling_mode(tz, simple_strtoul(mode_string, NULL, 0)); if (result) return result; acpi_thermal_check(tz); return count; } static int acpi_thermal_polling_seq_show(struct seq_file *seq, void *offset) { struct acpi_thermal *tz = seq->private; if (!tz) goto end; if (!tz->polling_frequency) { seq_puts(seq, "<polling disabled>\n"); goto end; } seq_printf(seq, "polling frequency: %lu seconds\n", (tz->polling_frequency / 10)); end: return 0; } static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file) { return single_open(file, acpi_thermal_polling_seq_show, PDE(inode)->data); } static ssize_t acpi_thermal_write_polling(struct file *file, const char __user * buffer, size_t count, loff_t * ppos) { struct seq_file *m = file->private_data; struct acpi_thermal *tz = m->private; int result = 0; char polling_string[12] = { '\0' }; int seconds = 0; if (!tz || (count > sizeof(polling_string) - 1)) return -EINVAL; if (copy_from_user(polling_string, buffer, count)) return -EFAULT; polling_string[count] = '\0'; seconds = simple_strtoul(polling_string, NULL, 0); result = acpi_thermal_set_polling(tz, seconds); if (result) return result; acpi_thermal_check(tz); return count; } static int acpi_thermal_add_fs(struct acpi_device *device) { struct proc_dir_entry *entry = NULL; if (!acpi_device_dir(device)) { acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), acpi_thermal_dir); if (!acpi_device_dir(device)) return -ENODEV; acpi_device_dir(device)->owner = THIS_MODULE; } /* 'state' [R] */ entry = proc_create_data(ACPI_THERMAL_FILE_STATE, S_IRUGO, acpi_device_dir(device), &acpi_thermal_state_fops, acpi_driver_data(device)); if (!entry) return -ENODEV; /* 'temperature' [R] */ entry = proc_create_data(ACPI_THERMAL_FILE_TEMPERATURE, S_IRUGO, acpi_device_dir(device), &acpi_thermal_temp_fops, acpi_driver_data(device)); if (!entry) return -ENODEV; /* 'trip_points' [R] */ entry = proc_create_data(ACPI_THERMAL_FILE_TRIP_POINTS, S_IRUGO, acpi_device_dir(device), &acpi_thermal_trip_fops, acpi_driver_data(device)); if (!entry) return -ENODEV; /* 'cooling_mode' [R/W] */ entry = proc_create_data(ACPI_THERMAL_FILE_COOLING_MODE, S_IFREG | S_IRUGO | S_IWUSR, acpi_device_dir(device), &acpi_thermal_cooling_fops, acpi_driver_data(device)); if (!entry) return -ENODEV; /* 'polling_frequency' [R/W] */ entry = proc_create_data(ACPI_THERMAL_FILE_POLLING_FREQ, S_IFREG | S_IRUGO | S_IWUSR, acpi_device_dir(device), &acpi_thermal_polling_fops, acpi_driver_data(device)); if (!entry) return -ENODEV; return 0; } static int acpi_thermal_remove_fs(struct acpi_device *device) { if (acpi_device_dir(device)) { remove_proc_entry(ACPI_THERMAL_FILE_POLLING_FREQ, acpi_device_dir(device)); remove_proc_entry(ACPI_THERMAL_FILE_COOLING_MODE, acpi_device_dir(device)); remove_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS, acpi_device_dir(device)); remove_proc_entry(ACPI_THERMAL_FILE_TEMPERATURE, acpi_device_dir(device)); remove_proc_entry(ACPI_THERMAL_FILE_STATE, acpi_device_dir(device)); remove_proc_entry(acpi_device_bid(device), acpi_thermal_dir); acpi_device_dir(device) = NULL; } return 0; } /* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) { struct acpi_thermal *tz = data; struct acpi_device *device = NULL; if (!tz) return; device = tz->device; switch (event) { case ACPI_THERMAL_NOTIFY_TEMPERATURE: acpi_thermal_check(tz); break; case ACPI_THERMAL_NOTIFY_THRESHOLDS: acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS); acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, device->dev.bus_id, event, 0); break; case ACPI_THERMAL_NOTIFY_DEVICES: acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES); acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, device->dev.bus_id, event, 0); break; default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported event [0x%x]\n", event)); break; } return; } static int acpi_thermal_get_info(struct acpi_thermal *tz) { int result = 0; if (!tz) return -EINVAL; /* Get temperature [_TMP] (required) */ result = acpi_thermal_get_temperature(tz); if (result) return result; /* Get trip points [_CRT, _PSV, etc.] (required) */ result = acpi_thermal_get_trip_points(tz); if (result) return result; /* Set the cooling mode [_SCP] to active cooling (default) */ result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE); if (!result) tz->flags.cooling_mode = 1; /* Get default polling frequency [_TZP] (optional) */ if (tzp) tz->polling_frequency = tzp; else acpi_thermal_get_polling_frequency(tz); return 0; } static int acpi_thermal_add(struct acpi_device *device) { int result = 0; acpi_status status = AE_OK; struct acpi_thermal *tz = NULL; if (!device) return -EINVAL; tz = kzalloc(sizeof(struct acpi_thermal), GFP_KERNEL); if (!tz) return -ENOMEM; tz->device = device; strcpy(tz->name, device->pnp.bus_id); strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME); strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS); device->driver_data = tz; mutex_init(&tz->lock); result = acpi_thermal_get_info(tz); if (result) goto free_memory; result = acpi_thermal_register_thermal_zone(tz); if (result) goto free_memory; result = acpi_thermal_add_fs(device); if (result) goto unregister_thermal_zone; init_timer(&tz->timer); acpi_thermal_active_off(tz); acpi_thermal_check(tz); status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, acpi_thermal_notify, tz); if (ACPI_FAILURE(status)) { result = -ENODEV; goto remove_fs; } printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device), acpi_device_bid(device), KELVIN_TO_CELSIUS(tz->temperature)); goto end; remove_fs: acpi_thermal_remove_fs(device); unregister_thermal_zone: thermal_zone_device_unregister(tz->thermal_zone); free_memory: kfree(tz); end: return result; } static int acpi_thermal_remove(struct acpi_device *device, int type) { acpi_status status = AE_OK; struct acpi_thermal *tz = NULL; if (!device || !acpi_driver_data(device)) return -EINVAL; tz = acpi_driver_data(device); /* avoid timer adding new defer task */ tz->zombie = 1; /* wait for running timer (on other CPUs) finish */ del_timer_sync(&(tz->timer)); /* synchronize deferred task */ acpi_os_wait_events_complete(NULL); /* deferred task may reinsert timer */ del_timer_sync(&(tz->timer)); status = acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, acpi_thermal_notify); /* Terminate policy */ if (tz->trips.passive.flags.valid && tz->trips.passive.flags.enabled) { tz->trips.passive.flags.enabled = 0; acpi_thermal_passive(tz); } if (tz->trips.active[0].flags.valid && tz->trips.active[0].flags.enabled) { tz->trips.active[0].flags.enabled = 0; acpi_thermal_active(tz); } acpi_thermal_remove_fs(device); acpi_thermal_unregister_thermal_zone(tz); mutex_destroy(&tz->lock); kfree(tz); return 0; } static int acpi_thermal_resume(struct acpi_device *device) { struct acpi_thermal *tz = NULL; int i, j, power_state, result; if (!device || !acpi_driver_data(device)) return -EINVAL; tz = acpi_driver_data(device); for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { if (!(&tz->trips.active[i])) break; if (!tz->trips.active[i].flags.valid) break; tz->trips.active[i].flags.enabled = 1; for (j = 0; j < tz->trips.active[i].devices.count; j++) { result = acpi_bus_get_power(tz->trips.active[i].devices. handles[j], &power_state); if (result || (power_state != ACPI_STATE_D0)) { tz->trips.active[i].flags.enabled = 0; break; } } tz->state.active |= tz->trips.active[i].flags.enabled; } acpi_thermal_check(tz); return AE_OK; } static int thermal_act(const struct dmi_system_id *d) { if (act == 0) { printk(KERN_NOTICE "ACPI: %s detected: " "disabling all active thermal trip points\n", d->ident); act = -1; } return 0; } static int thermal_nocrt(const struct dmi_system_id *d) { printk(KERN_NOTICE "ACPI: %s detected: " "disabling all critical thermal trip point actions.\n", d->ident); nocrt = 1; return 0; } static int thermal_tzp(const struct dmi_system_id *d) { if (tzp == 0) { printk(KERN_NOTICE "ACPI: %s detected: " "enabling thermal zone polling\n", d->ident); tzp = 300; /* 300 dS = 30 Seconds */ } return 0; } static int thermal_psv(const struct dmi_system_id *d) { if (psv == 0) { printk(KERN_NOTICE "ACPI: %s detected: " "disabling all passive thermal trip points\n", d->ident); psv = -1; } return 0; } static struct dmi_system_id thermal_dmi_table[] __initdata = { /* * Award BIOS on this AOpen makes thermal control almost worthless. * http://bugzilla.kernel.org/show_bug.cgi?id=8842 */ { .callback = thermal_act, .ident = "AOpen i915GMm-HFS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"), DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"), }, }, { .callback = thermal_psv, .ident = "AOpen i915GMm-HFS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"), DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"), }, }, { .callback = thermal_tzp, .ident = "AOpen i915GMm-HFS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"), DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"), }, }, { .callback = thermal_nocrt, .ident = "Gigabyte GA-7ZX", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."), DMI_MATCH(DMI_BOARD_NAME, "7ZX"), }, }, {} }; static int __init acpi_thermal_init(void) { int result = 0; dmi_check_system(thermal_dmi_table); if (off) { printk(KERN_NOTICE "ACPI: thermal control disabled\n"); return -ENODEV; } acpi_thermal_dir = proc_mkdir(ACPI_THERMAL_CLASS, acpi_root_dir); if (!acpi_thermal_dir) return -ENODEV; acpi_thermal_dir->owner = THIS_MODULE; result = acpi_bus_register_driver(&acpi_thermal_driver); if (result < 0) { remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir); return -ENODEV; } return 0; } static void __exit acpi_thermal_exit(void) { acpi_bus_unregister_driver(&acpi_thermal_driver); remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir); return; } module_init(acpi_thermal_init); module_exit(acpi_thermal_exit);