/* * sata_sil.c - Silicon Image SATA * * Maintained by: Jeff Garzik * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * * Copyright 2003-2005 Red Hat, Inc. * Copyright 2003 Benjamin Herrenschmidt * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * * libata documentation is available via 'make {ps|pdf}docs', * as Documentation/DocBook/libata.* * * Documentation for SiI 3112: * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 * * Other errata and documentation available under NDA. * */ #include #include #include #include #include #include #include #include #include #include #include #define DRV_NAME "sata_sil" #define DRV_VERSION "2.4" #define SIL_DMA_BOUNDARY 0x7fffffffUL enum { SIL_MMIO_BAR = 5, /* * host flags */ SIL_FLAG_NO_SATA_IRQ = (1 << 28), SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), SIL_FLAG_MOD15WRITE = (1 << 30), SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA, /* * Controller IDs */ sil_3112 = 0, sil_3112_no_sata_irq = 1, sil_3512 = 2, sil_3114 = 3, /* * Register offsets */ SIL_SYSCFG = 0x48, /* * Register bits */ /* SYSCFG */ SIL_MASK_IDE0_INT = (1 << 22), SIL_MASK_IDE1_INT = (1 << 23), SIL_MASK_IDE2_INT = (1 << 24), SIL_MASK_IDE3_INT = (1 << 25), SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT, SIL_MASK_4PORT = SIL_MASK_2PORT | SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, /* BMDMA/BMDMA2 */ SIL_INTR_STEERING = (1 << 1), SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */ SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */ SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */ SIL_DMA_ACTIVE = (1 << 16), /* DMA running */ SIL_DMA_ERROR = (1 << 17), /* PCI bus error */ SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */ SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */ SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */ SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */ SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */ /* SIEN */ SIL_SIEN_N = (1 << 16), /* triggered by SError.N */ /* * Others */ SIL_QUIRK_MOD15WRITE = (1 << 0), SIL_QUIRK_UDMA5MAX = (1 << 1), }; static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); #ifdef CONFIG_PM static int sil_pci_device_resume(struct pci_dev *pdev); #endif static void sil_dev_config(struct ata_device *dev); static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed); static void sil_qc_prep(struct ata_queued_cmd *qc); static void sil_bmdma_setup(struct ata_queued_cmd *qc); static void sil_bmdma_start(struct ata_queued_cmd *qc); static void sil_bmdma_stop(struct ata_queued_cmd *qc); static void sil_freeze(struct ata_port *ap); static void sil_thaw(struct ata_port *ap); static const struct pci_device_id sil_pci_tbl[] = { { PCI_VDEVICE(CMD, 0x3112), sil_3112 }, { PCI_VDEVICE(CMD, 0x0240), sil_3112 }, { PCI_VDEVICE(CMD, 0x3512), sil_3512 }, { PCI_VDEVICE(CMD, 0x3114), sil_3114 }, { PCI_VDEVICE(ATI, 0x436e), sil_3112 }, { PCI_VDEVICE(ATI, 0x4379), sil_3112_no_sata_irq }, { PCI_VDEVICE(ATI, 0x437a), sil_3112_no_sata_irq }, { } /* terminate list */ }; /* TODO firmware versions should be added - eric */ static const struct sil_drivelist { const char *product; unsigned int quirk; } sil_blacklist [] = { { "ST320012AS", SIL_QUIRK_MOD15WRITE }, { "ST330013AS", SIL_QUIRK_MOD15WRITE }, { "ST340017AS", SIL_QUIRK_MOD15WRITE }, { "ST360015AS", SIL_QUIRK_MOD15WRITE }, { "ST380023AS", SIL_QUIRK_MOD15WRITE }, { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, { } }; static struct pci_driver sil_pci_driver = { .name = DRV_NAME, .id_table = sil_pci_tbl, .probe = sil_init_one, .remove = ata_pci_remove_one, #ifdef CONFIG_PM .suspend = ata_pci_device_suspend, .resume = sil_pci_device_resume, #endif }; static struct scsi_host_template sil_sht = { ATA_BASE_SHT(DRV_NAME), /** These controllers support Large Block Transfer which allows transfer chunks up to 2GB and which cross 64KB boundaries, therefore the DMA limits are more relaxed than standard ATA SFF. */ .dma_boundary = SIL_DMA_BOUNDARY, .sg_tablesize = ATA_MAX_PRD }; static struct ata_port_operations sil_ops = { .inherits = &ata_bmdma32_port_ops, .dev_config = sil_dev_config, .set_mode = sil_set_mode, .bmdma_setup = sil_bmdma_setup, .bmdma_start = sil_bmdma_start, .bmdma_stop = sil_bmdma_stop, .qc_prep = sil_qc_prep, .freeze = sil_freeze, .thaw = sil_thaw, .scr_read = sil_scr_read, .scr_write = sil_scr_write, }; static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, /* sil_3112_no_sata_irq */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | SIL_FLAG_NO_SATA_IRQ, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, /* sil_3512 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, /* sil_3114 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, }; /* per-port register offsets */ /* TODO: we can probably calculate rather than use a table */ static const struct { unsigned long tf; /* ATA taskfile register block */ unsigned long ctl; /* ATA control/altstatus register block */ unsigned long bmdma; /* DMA register block */ unsigned long bmdma2; /* DMA register block #2 */ unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ unsigned long scr; /* SATA control register block */ unsigned long sien; /* SATA Interrupt Enable register */ unsigned long xfer_mode;/* data transfer mode register */ unsigned long sfis_cfg; /* SATA FIS reception config register */ } sil_port[] = { /* port 0 ... */ /* tf ctl bmdma bmdma2 fifo scr sien mode sfis */ { 0x80, 0x8A, 0x0, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c }, { 0xC0, 0xCA, 0x8, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, /* ... port 3 */ }; MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sil_pci_tbl); MODULE_VERSION(DRV_VERSION); static int slow_down; module_param(slow_down, int, 0444); MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)"); static void sil_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; /* clear start/stop bit - can safely always write 0 */ iowrite8(0, bmdma2); /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ ata_sff_dma_pause(ap); } static void sil_bmdma_setup(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; void __iomem *bmdma = ap->ioaddr.bmdma_addr; /* load PRD table addr. */ iowrite32(ap->bmdma_prd_dma, bmdma + ATA_DMA_TABLE_OFS); /* issue r/w command */ ap->ops->sff_exec_command(ap, &qc->tf); } static void sil_bmdma_start(struct ata_queued_cmd *qc) { unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); struct ata_port *ap = qc->ap; void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; u8 dmactl = ATA_DMA_START; /* set transfer direction, start host DMA transaction Note: For Large Block Transfer to work, the DMA must be started using the bmdma2 register. */ if (!rw) dmactl |= ATA_DMA_WR; iowrite8(dmactl, bmdma2); } /* The way God intended PCI IDE scatter/gather lists to look and behave... */ static void sil_fill_sg(struct ata_queued_cmd *qc) { struct scatterlist *sg; struct ata_port *ap = qc->ap; struct ata_bmdma_prd *prd, *last_prd = NULL; unsigned int si; prd = &ap->bmdma_prd[0]; for_each_sg(qc->sg, sg, qc->n_elem, si) { /* Note h/w doesn't support 64-bit, so we unconditionally * truncate dma_addr_t to u32. */ u32 addr = (u32) sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); prd->addr = cpu_to_le32(addr); prd->flags_len = cpu_to_le32(sg_len); VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len); last_prd = prd; prd++; } if (likely(last_prd)) last_prd->flags_len |= cpu_to_le32(ATA_PRD_EOT); } static void sil_qc_prep(struct ata_queued_cmd *qc) { if (!(qc->flags & ATA_QCFLAG_DMAMAP)) return; sil_fill_sg(qc); } static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) { u8 cache_line = 0; pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line); return cache_line; } /** * sil_set_mode - wrap set_mode functions * @link: link to set up * @r_failed: returned device when we fail * * Wrap the libata method for device setup as after the setup we need * to inspect the results and do some configuration work */ static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed) { struct ata_port *ap = link->ap; void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode; struct ata_device *dev; u32 tmp, dev_mode[2] = { }; int rc; rc = ata_do_set_mode(link, r_failed); if (rc) return rc; ata_for_each_dev(dev, link, ALL) { if (!ata_dev_enabled(dev)) dev_mode[dev->devno] = 0; /* PIO0/1/2 */ else if (dev->flags & ATA_DFLAG_PIO) dev_mode[dev->devno] = 1; /* PIO3/4 */ else dev_mode[dev->devno] = 3; /* UDMA */ /* value 2 indicates MDMA */ } tmp = readl(addr); tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0)); tmp |= dev_mode[0]; tmp |= (dev_mode[1] << 4); writel(tmp, addr); readl(addr); /* flush */ return 0; } static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg) { void __iomem *offset = ap->ioaddr.scr_addr; switch (sc_reg) { case SCR_STATUS: return offset + 4; case SCR_ERROR: return offset + 8; case SCR_CONTROL: return offset; default: /* do nothing */ break; } return NULL; } static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) { void __iomem *mmio = sil_scr_addr(link->ap, sc_reg); if (mmio) { *val = readl(mmio); return 0; } return -EINVAL; } static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) { void __iomem *mmio = sil_scr_addr(link->ap, sc_reg); if (mmio) { writel(val, mmio); return 0; } return -EINVAL; } static void sil_host_intr(struct ata_port *ap, u32 bmdma2) { struct ata_eh_info *ehi = &ap->link.eh_info; struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); u8 status; if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { u32 serror = 0xffffffff; /* SIEN doesn't mask SATA IRQs on some 3112s. Those * controllers continue to assert IRQ as long as * SError bits are pending. Clear SError immediately. */ sil_scr_read(&ap->link, SCR_ERROR, &serror); sil_scr_write(&ap->link, SCR_ERROR, serror); /* Sometimes spurious interrupts occur, double check * it's PHYRDY CHG. */ if (serror & SERR_PHYRDY_CHG) { ap->link.eh_info.serror |= serror; goto freeze; } if (!(bmdma2 & SIL_DMA_COMPLETE)) return; } if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { /* this sometimes happens, just clear IRQ */ ap->ops->sff_check_status(ap); return; } /* Check whether we are expecting interrupt in this state */ switch (ap->hsm_task_state) { case HSM_ST_FIRST: /* Some pre-ATAPI-4 devices assert INTRQ * at this state when ready to receive CDB. */ /* Check the ATA_DFLAG_CDB_INTR flag is enough here. * The flag was turned on only for atapi devices. No * need to check ata_is_atapi(qc->tf.protocol) again. */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) goto err_hsm; break; case HSM_ST_LAST: if (ata_is_dma(qc->tf.protocol)) { /* clear DMA-Start bit */ ap->ops->bmdma_stop(qc); if (bmdma2 & SIL_DMA_ERROR) { qc->err_mask |= AC_ERR_HOST_BUS; ap->hsm_task_state = HSM_ST_ERR; } } break; case HSM_ST: break; default: goto err_hsm; } /* check main status, clearing INTRQ */ status = ap->ops->sff_check_status(ap); if (unlikely(status & ATA_BUSY)) goto err_hsm; /* ack bmdma irq events */ ata_bmdma_irq_clear(ap); /* kick HSM in the ass */ ata_sff_hsm_move(ap, qc, status, 0); if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol)) ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2); return; err_hsm: qc->err_mask |= AC_ERR_HSM; freeze: ata_port_freeze(ap); } static irqreturn_t sil_interrupt(int irq, void *dev_instance) { struct ata_host *host = dev_instance; void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; int handled = 0; int i; spin_lock(&host->lock); for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); /* turn off SATA_IRQ if not supported */ if (ap->flags & SIL_FLAG_NO_SATA_IRQ) bmdma2 &= ~SIL_DMA_SATA_IRQ; if (bmdma2 == 0xffffffff || !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) continue; sil_host_intr(ap, bmdma2); handled = 1; } spin_unlock(&host->lock); return IRQ_RETVAL(handled); } static void sil_freeze(struct ata_port *ap) { void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; u32 tmp; /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ writel(0, mmio_base + sil_port[ap->port_no].sien); /* plug IRQ */ tmp = readl(mmio_base + SIL_SYSCFG); tmp |= SIL_MASK_IDE0_INT << ap->port_no; writel(tmp, mmio_base + SIL_SYSCFG); readl(mmio_base + SIL_SYSCFG); /* flush */ /* Ensure DMA_ENABLE is off. * * This is because the controller will not give us access to the * taskfile registers while a DMA is in progress */ iowrite8(ioread8(ap->ioaddr.bmdma_addr) & ~SIL_DMA_ENABLE, ap->ioaddr.bmdma_addr); /* According to ata_bmdma_stop, an HDMA transition requires * on PIO cycle. But we can't read a taskfile register. */ ioread8(ap->ioaddr.bmdma_addr); } static void sil_thaw(struct ata_port *ap) { void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; u32 tmp; /* clear IRQ */ ap->ops->sff_check_status(ap); ata_bmdma_irq_clear(ap); /* turn on SATA IRQ if supported */ if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ)) writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien); /* turn on IRQ */ tmp = readl(mmio_base + SIL_SYSCFG); tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); writel(tmp, mmio_base + SIL_SYSCFG); } /** * sil_dev_config - Apply device/host-specific errata fixups * @dev: Device to be examined * * After the IDENTIFY [PACKET] DEVICE step is complete, and a * device is known to be present, this function is called. * We apply two errata fixups which are specific to Silicon Image, * a Seagate and a Maxtor fixup. * * For certain Seagate devices, we must limit the maximum sectors * to under 8K. * * For certain Maxtor devices, we must not program the drive * beyond udma5. * * Both fixups are unfairly pessimistic. As soon as I get more * information on these errata, I will create a more exhaustive * list, and apply the fixups to only the specific * devices/hosts/firmwares that need it. * * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted * The Maxtor quirk is in the blacklist, but I'm keeping the original * pessimistic fix for the following reasons... * - There seems to be less info on it, only one device gleaned off the * Windows driver, maybe only one is affected. More info would be greatly * appreciated. * - But then again UDMA5 is hardly anything to complain about */ static void sil_dev_config(struct ata_device *dev) { struct ata_port *ap = dev->link->ap; int print_info = ap->link.eh_context.i.flags & ATA_EHI_PRINTINFO; unsigned int n, quirks = 0; unsigned char model_num[ATA_ID_PROD_LEN + 1]; ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); for (n = 0; sil_blacklist[n].product; n++) if (!strcmp(sil_blacklist[n].product, model_num)) { quirks = sil_blacklist[n].quirk; break; } /* limit requests to 15 sectors */ if (slow_down || ((ap->flags & SIL_FLAG_MOD15WRITE) && (quirks & SIL_QUIRK_MOD15WRITE))) { if (print_info) ata_dev_info(dev, "applying Seagate errata fix (mod15write workaround)\n"); dev->max_sectors = 15; return; } /* limit to udma5 */ if (quirks & SIL_QUIRK_UDMA5MAX) { if (print_info) ata_dev_info(dev, "applying Maxtor errata fix %s\n", model_num); dev->udma_mask &= ATA_UDMA5; return; } } static void sil_init_controller(struct ata_host *host) { struct pci_dev *pdev = to_pci_dev(host->dev); void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; u8 cls; u32 tmp; int i; /* Initialize FIFO PCI bus arbitration */ cls = sil_get_device_cache_line(pdev); if (cls) { cls >>= 3; cls++; /* cls = (line_size/8)+1 */ for (i = 0; i < host->n_ports; i++) writew(cls << 8 | cls, mmio_base + sil_port[i].fifo_cfg); } else dev_warn(&pdev->dev, "cache line size not set. Driver may not function\n"); /* Apply R_ERR on DMA activate FIS errata workaround */ if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) { int cnt; for (i = 0, cnt = 0; i < host->n_ports; i++) { tmp = readl(mmio_base + sil_port[i].sfis_cfg); if ((tmp & 0x3) != 0x01) continue; if (!cnt) dev_info(&pdev->dev, "Applying R_ERR on DMA activate FIS errata fix\n"); writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); cnt++; } } if (host->n_ports == 4) { /* flip the magic "make 4 ports work" bit */ tmp = readl(mmio_base + sil_port[2].bmdma); if ((tmp & SIL_INTR_STEERING) == 0) writel(tmp | SIL_INTR_STEERING, mmio_base + sil_port[2].bmdma); } } static bool sil_broken_system_poweroff(struct pci_dev *pdev) { static const struct dmi_system_id broken_systems[] = { { .ident = "HP Compaq nx6325", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"), }, /* PCI slot number of the controller */ .driver_data = (void *)0x12UL, }, { } /* terminate list */ }; const struct dmi_system_id *dmi = dmi_first_match(broken_systems); if (dmi) { unsigned long slot = (unsigned long)dmi->driver_data; /* apply the quirk only to on-board controllers */ return slot == PCI_SLOT(pdev->devfn); } return false; } static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int board_id = ent->driver_data; struct ata_port_info pi = sil_port_info[board_id]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct ata_host *host; void __iomem *mmio_base; int n_ports, rc; unsigned int i; ata_print_version_once(&pdev->dev, DRV_VERSION); /* allocate host */ n_ports = 2; if (board_id == sil_3114) n_ports = 4; if (sil_broken_system_poweroff(pdev)) { pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN | ATA_FLAG_NO_HIBERNATE_SPINDOWN; dev_info(&pdev->dev, "quirky BIOS, skipping spindown " "on poweroff and hibernation\n"); } host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); if (!host) return -ENOMEM; /* acquire resources and fill host */ rc = pcim_enable_device(pdev); if (rc) return rc; rc = pcim_iomap_regions(pdev, 1 << SIL_MMIO_BAR, DRV_NAME); if (rc == -EBUSY) pcim_pin_device(pdev); if (rc) return rc; host->iomap = pcim_iomap_table(pdev); rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); if (rc) return rc; rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); if (rc) return rc; mmio_base = host->iomap[SIL_MMIO_BAR]; for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; struct ata_ioports *ioaddr = &ap->ioaddr; ioaddr->cmd_addr = mmio_base + sil_port[i].tf; ioaddr->altstatus_addr = ioaddr->ctl_addr = mmio_base + sil_port[i].ctl; ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma; ioaddr->scr_addr = mmio_base + sil_port[i].scr; ata_sff_std_ports(ioaddr); ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio"); ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf"); } /* initialize and activate */ sil_init_controller(host); pci_set_master(pdev); return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED, &sil_sht); } #ifdef CONFIG_PM static int sil_pci_device_resume(struct pci_dev *pdev) { struct ata_host *host = pci_get_drvdata(pdev); int rc; rc = ata_pci_device_do_resume(pdev); if (rc) return rc; sil_init_controller(host); ata_host_resume(host); return 0; } #endif module_pci_driver(sil_pci_driver);