config DVB_USB tristate "Support for various USB DVB devices" depends on DVB_CORE && USB && I2C && RC_CORE help By enabling this you will be able to choose the various supported USB1.1 and USB2.0 DVB devices. Almost every USB device needs a firmware, please look into . For a complete list of supported USB devices see the LinuxTV DVB Wiki: Say Y if you own a USB DVB device. config DVB_USB_DEBUG bool "Enable extended debug support for all DVB-USB devices" depends on DVB_USB help Say Y if you want to enable debugging. See modinfo dvb-usb (and the appropriate drivers) for debug levels. config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB select DVB_DIB3000MC select DVB_PLL if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. config DVB_USB_DIBUSB_MB tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MB select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom () equipped with a DiB3000M-B demodulator. For an up-to-date list of devices supported by this driver, have a look on the Linux-DVB Wiki at www.linuxtv.org. Say Y if you own such a device and want to use it. You should build it as a module. config DVB_USB_DIBUSB_MB_FAULTY bool "Support faulty USB IDs" depends on DVB_USB_DIBUSB_MB help Support for faulty USB IDs due to an invalid EEPROM on some Artec devices. config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB select DVB_DIB3000MC select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE help Support for USB2.0 DVB-T receivers based on reference designs made by DiBcom () equipped with a DiB3000M-C/P demodulator. For an up-to-date list of devices supported by this driver, have a look on the Linux-DVB Wiki at www.linuxtv.org. Say Y if you own such a device and want to use it. You should build it as a module. config DVB_USB_DIB0700 tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)" depends on DVB_USB select DVB_DIB7000P if !DVB_FE_CUSTOMISE select DVB_DIB7000M if !DVB_FE_CUSTOMISE select DVB_DIB8000 if !DVB_FE_CUSTOMISE select DVB_DIB3000MC if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT3305 if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0090 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The USB bridge is also present in devices having the DiB7700 DVB-T-USB silicon. This chip can be found in devices offered by Hauppauge, Avermedia and other big and small companies. For an up-to-date list of devices supported by this driver, have a look on the LinuxTV Wiki at www.linuxtv.org. Say Y if you own such a device and want to use it. You should build it as a module. config DVB_USB_UMT_010 tristate "HanfTek UMT-010 DVB-T USB2.0 support" depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_DIB3000MC select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE select DVB_MT352 if !DVB_FE_CUSTOMISE help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. config DVB_USB_CXUSB tristate "Conexant USB2.0 hybrid reference design support" depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_CX22702 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE select DVB_DIB7000P if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE select DVB_ATBM8830 if !DVB_FE_CUSTOMISE select DVB_LGS8GXX if !DVB_FE_CUSTOMISE select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode shall be added in the future. Devices that require this module: Medion MD95700 hybrid USB2.0 device. DViCO FusionHDTV (Bluebird) USB2.0 devices config DVB_USB_M920X tristate "Uli m920x DVB-T USB2.0 support" depends on DVB_USB select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. Currently, only devices with a product id of "DTV USB MINI" (in cold state) are supported. Firmware required. config DVB_USB_GL861 tristate "Genesys Logic GL861 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 receiver with USB ID 0db0:5581. config DVB_USB_AU6610 tristate "Alcor Micro AU6610 USB2.0 support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. config DVB_USB_DIGITV tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_NXT6000 if !DVB_FE_CUSTOMISE select DVB_MT352 if !DVB_FE_CUSTOMISE help Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver. config DVB_USB_VP7045 tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support" depends on DVB_USB help Say Y here to support the TwinhanDTV Alpha (stick) (VP-7045), TwinhanDTV MagicBox II (VP-7046), DigitalNow TinyUSB 2 DVB-t, DigitalRise USB 2.0 Ter (Beetle) and TYPHOON DVB-T USB DRIVE DVB-T USB2.0 receivers. config DVB_USB_VP702X tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support" depends on DVB_USB help Say Y here to support the TwinhanDTV StarBox, DigitalRise USB Starbox and TYPHOON DVB-S USB 2.0 BOX DVB-S USB2.0 receivers. config DVB_USB_GP8PSK tristate "GENPIX 8PSK->USB module support" depends on DVB_USB help Say Y here to support the GENPIX 8psk module DVB-S USB2.0 receivers. config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC select DVB_PLL if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. config DVB_USB_TTUSB2 tristate "Pinnacle 400e DVB-S USB2.0 support" depends on DVB_USB select DVB_TDA10086 if !DVB_FE_CUSTOMISE select DVB_LNBP21 if !DVB_FE_CUSTOMISE select DVB_TDA826X if !DVB_FE_CUSTOMISE help Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The firmware protocol used by this module is similar to the one used by the old ttusb-driver - that's why the module is called dvb-usb-ttusb2. config DVB_USB_DTT200U tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" depends on DVB_USB help Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). The WT-220U and its clones are pen-sized. config DVB_USB_OPERA1 tristate "Opera1 DVB-S USB2.0 receiver" depends on DVB_USB select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE help Say Y here to support the Opera DVB-S USB2.0 receiver. config DVB_USB_AF9005 tristate "Afatech AF9005 DVB-T USB1.1 support" depends on DVB_USB && EXPERIMENTAL select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver and the TerraTec Cinergy T USB XE (Rev.1) config DVB_USB_AF9005_REMOTE tristate "Afatech AF9005 default remote control support" depends on DVB_USB_AF9005 help Say Y here to support the default remote control decoding for the Afatech AF9005 based receiver. config DVB_USB_DW2102 tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support" depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_STV0288 if !DVB_FE_CUSTOMISE select DVB_STB6000 if !DVB_FE_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE select DVB_SI21XX if !DVB_FE_CUSTOMISE select DVB_TDA10023 if !DVB_FE_CUSTOMISE select DVB_MT312 if !DVB_FE_CUSTOMISE select DVB_ZL10039 if !DVB_FE_CUSTOMISE select DVB_DS3000 if !DVB_FE_CUSTOMISE select DVB_STB6100 if !DVB_FE_CUSTOMISE select DVB_STV6110 if !DVB_FE_CUSTOMISE select DVB_STV0900 if !DVB_FE_CUSTOMISE help Say Y here to support the DvbWorld, TeVii, Prof DVB-S/S2 USB2.0 receivers. config DVB_USB_CINERGY_T2 tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" depends on DVB_USB help Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers Say Y if you own such a device and want to use it. config DVB_USB_ANYSEE tristate "Anysee DVB-T/C USB2.0 support" depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE select DVB_TDA10023 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_TDA18212 if !MEDIA_TUNER_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE select DVB_STV0900 if !DVB_FE_CUSTOMISE select DVB_STV6110 if !DVB_FE_CUSTOMISE select DVB_ISL6423 if !DVB_FE_CUSTOMISE help Say Y here to support the Anysee E30, Anysee E30 Plus or Anysee E30 C Plus DVB USB2.0 receiver. config DVB_USB_DTV5100 tristate "AME DTV-5100 USB2.0 DVB-T support" depends on DVB_USB select DVB_ZL10353 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. config DVB_USB_AF9015 tristate "Afatech AF9015 DVB-T USB2.0 support" depends on DVB_USB select DVB_AF9013 select DVB_PLL if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TDA18218 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver config DVB_USB_CE6230 tristate "Intel CE6230 DVB-T USB2.0 support" depends on DVB_USB && EXPERIMENTAL select DVB_ZL10353 select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver config DVB_USB_FRIIO tristate "Friio ISDB-T USB2.0 Receiver support" depends on DVB_USB help Say Y here to support the Japanese DTV receiver Friio. config DVB_USB_EC168 tristate "E3C EC168 DVB-T USB2.0 support" depends on DVB_USB && EXPERIMENTAL select DVB_EC100 select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the E3C EC168 DVB-T USB2.0 receiver. config DVB_USB_AZ6027 tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support" depends on DVB_USB select DVB_STB0899 if !DVB_FE_CUSTOMISE select DVB_STB6100 if !DVB_FE_CUSTOMISE help Say Y here to support the AZ6027 device config DVB_USB_LME2510 tristate "LME DM04/QQBOX DVB-S USB2.0 support" depends on DVB_USB select DVB_TDA10086 if !DVB_FE_CUSTOMISE select DVB_TDA826X if !DVB_FE_CUSTOMISE select DVB_STV0288 if !DVB_FE_CUSTOMISE select DVB_IX2505V if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE help Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 . config DVB_USB_TECHNISAT_USB2 tristate "Technisat DVB-S/S2 USB2.0 support" depends on DVB_USB select DVB_STV090x if !DVB_FE_CUSTOMISE select DVB_STV6110x if !DVB_FE_CUSTOMISE help Say Y here to support the Technisat USB2 DVB-S/S2 device