/* Driver for USB Mass Storage compliant devices * Unusual Devices File * * Current development and maintenance by: * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) * * Initial work by: * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc. * * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more * information about this driver. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ /* IMPORTANT NOTE: This file must be included in another file which does * the following thing for it to work: * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined * before this file is included. */ /* If you edit this file, please try to keep it sorted first by VendorID, * then by ProductID. * * If you want to add an entry for this file, be sure to include the * following information: * - a patch that adds the entry for your device, including your * email address right above the entry (plus maybe a brief * explanation of the reason for the entry), * - a copy of /proc/bus/usb/devices with your device plugged in * running with this patch. * Send your submission to either Phil Dibowitz or * Alan Stern , and don't forget to CC: the * USB development list and the USB storage list * */ /* Note: If you add an entry only in order to set the CAPACITY_OK flag, * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is * because such entries mark devices which actually work correctly, * as opposed to devices that do something strangely or wrongly. */ #if !defined(CONFIG_USB_STORAGE_SDDR09) && \ !defined(CONFIG_USB_STORAGE_SDDR09_MODULE) #define NO_SDDR09 #endif /* patch submitted by Vivian Bregier */ UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100, "ATMEL", "SND1 Storage", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE), /* Reported by Rodolfo Quesada */ UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003, "VIA Technologies Inc.", "Mitsumi multi cardreader", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, "HP", "CD-Writer+", USB_SC_8070, USB_PR_CB, NULL, 0), /* Reported by Ben Efros */ UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000, "HP", "Personal Media Drive", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SANE_SENSE ), /* Reported by Grant Grundler * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware. */ UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001, "HP", "PhotoSmart R707", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), /* Reported by Sebastian Kapfer * and Olaf Hering (different bcd's, same vendor/product) * for USB floppies that need the SINGLE_LUN enforcement. */ UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999, "NEC", "NEC USB UF000x", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Patch submitted by Mihnea-Costin Grigore */ UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003, "VIA Technologies Inc.", "USB 2.0 Card Reader", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Deduced by Jonathan Woithe * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message * always fails and confuses drive. */ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, "Buffalo", "DUB-P40G HDD", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Submitted by Ernestas Vaiciukevicius */ UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100, "Samsung Info. Systems America, Inc.", "MP3 Player", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Orgad Shaneh */ UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100, "Samsung", "MP3 Player", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Christian Leber */ UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100, "TrekStor", "i.Beat 115 2.0", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ), /* Reported by Stefan Werner */ UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100, "TrekStor", "i.Beat Joy 2.0", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Pete Zaitcev , bz#176584 */ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, "GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Andrew Nayenko * Updated for new firmware by Phillip Potter */ UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610, "Nokia", "Nokia 6288", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), /* Reported by Mario Rettig */ UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, "Nokia", "Nokia 3250", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), /* Reported by */ UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100, "Nokia", "E70", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), /* Reported by Jon Hart */ UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100, "Nokia", "E60", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), /* Reported by Sumedha Swamy and * Einar Th. Einarsson */ UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100, "Nokia", "N91", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), /* Reported by Jiri Slaby and * Rene C. Castberg */ UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100, "Nokia", "N80", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), /* Reported by Matthew Bloch */ UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100, "Nokia", "E61", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), /* Reported by Bardur Arantsson */ UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610, "Nokia", "6131", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), /* Reported by Manuel Osdoba */ UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999, "Nokia", "Nokia 6233", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), /* Reported by Alex Corcoles */ UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370, "Nokia", "6234", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), #ifdef NO_SDDR09 UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, "Microtech", "CameraMate", USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN ), #endif /* Patch submitted by Daniel Drake * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */ UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100, "Neuros Audio", "USB 2.0 HD 2.5", USB_SC_DEVICE, USB_PR_BULK, NULL, US_FL_NEED_OVERRIDE ), /* * Pete Zaitcev , from Patrick C. F. Ernzer, bz#162559. * The key does not actually break, but it returns zero sense which * makes our SCSI stack to print confusing messages. */ UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100, "USBest Technology", /* sold by Transcend */ "USB Mass Storage Device", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), /* * Bohdan Linda * 1GB USB sticks MyFlash High Speed. I have restricted * the revision to my model only */ UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100, "USB 2.0", "Flash Disk", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), /* Reported by Tamas Kerecsen * Obviously the PROM has not been customized by the VAR; * the Vendor and Product string descriptors are: * Generic Mass Storage (PROTOTYPE--Remember to change idVendor) * Generic Manufacturer (PROTOTYPE--Remember to change idVendor) */ UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000, "Mitac", "GPS", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), /* * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.) * Reported by Pete Zaitcev * This device chokes on both version of MODE SENSE which we have, so * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT. */ UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100, "AMI", "Virtual Floppy", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_WP_DETECT), /* Patch submitted by Philipp Friedrich */ UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, "Kyocera", "Finecam S3x", USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY), /* Patch submitted by Philipp Friedrich */ UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100, "Kyocera", "Finecam S4", USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY), /* Patch submitted by Stephane Galles */ UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100, "Kyocera", "Finecam S5", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), /* Patch submitted by Jens Taprogge */ UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100, "Kyocera", "CONTAX SL300R T*", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE), /* Reported by Paul Stewart * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001, "Hitachi", "DVD-CAM DZ-MV100A Camcorder", USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN), /* BENQ DC5330 * Reported by Manuel Fombuena and * Frank Copeland */ UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, "Tekom Technologies, Inc", "300_CAMERA", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Patch for Nikon coolpix 2000 * Submitted by Fabien Cosse */ UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010, "NIKON", "NIKON DSC E2000", USB_SC_DEVICE, USB_PR_DEVICE,NULL, US_FL_NOT_LOCKABLE ), /* Reported by Doug Maxey (dwm@austin.ibm.com) */ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, "IBM", "IBM RSA2", USB_SC_DEVICE, USB_PR_CB, NULL, US_FL_MAX_SECTORS_MIN), /* Reported by Simon Levitt * This entry needs Sub and Proto fields */ UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, "Epson", "875DC Storage", USB_SC_SCSI, USB_PR_CB, NULL, US_FL_FIX_INQUIRY), /* Reported by Khalid Aziz * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110, "Epson", "785EPX Storage", USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN), /* Not sure who reported this originally but * Pavel Machek reported that the extra US_FL_SINGLE_LUN * flag be added */ UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, "Fujifilm", "FinePix 1400Zoom", USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN), /* Reported by Ondrej Zary * The device reports one sector more and breaks when that sector is accessed */ UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c, "ScanLogic", "SL11R-IDE", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), /* Reported by Kriston Fincher * Patch submitted by Sean Millichamp * This is to support the Panasonic PalmCam PV-SD4090 * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200, "Panasonic", "LS-120 Camera", USB_SC_UFI, USB_PR_DEVICE, NULL, 0), /* From Yukihiro Nakai, via zaitcev@yahoo.com. * This is needed for CB instead of CBI */ UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000, "Sharp CE-CW05", "CD-R/RW Drive", USB_SC_8070, USB_PR_CB, NULL, 0), /* Reported by Adriaan Penning */ UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999, "Panasonic", "DMC-LCx Camera", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), /* Reported by Simeon Simeonov */ UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999, "LEICA", "D-LUX Camera", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), /* Most of the following entries were developed with the help of * Shuttle/SCM directly. */ UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200, "Matshita", "LS-120", USB_SC_8020, USB_PR_CB, NULL, 0), UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, "Shuttle", "eUSCSI Bridge", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), #ifdef NO_SDDR09 UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, "SCM Microsystems", "eUSB CompactFlash Adapter", USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN), #endif /* Reported by Markus Demleitner */ UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100, "SCM Microsystems Inc.", "eUSB MMC Adapter", USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN), /* Reported by Daniel Nouri */ UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205, "Shuttle", "eUSB MMC Adapter", USB_SC_SCSI, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN), UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200, "Sony", "Hifd", USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN), UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200, "Shuttle", "eUSB ATA/ATAPI Adapter", USB_SC_8020, USB_PR_CB, NULL, 0), UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200, "Shuttle", "eUSB CompactFlash Adapter", USB_SC_8020, USB_PR_CB, NULL, 0), UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100, "Shuttle", "eUSCSI Bridge", USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100, "Shuttle", "eUSCSI Bridge", USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, "Shuttle", "CD-RW Device", USB_SC_8020, USB_PR_CB, NULL, 0), /* Reported by Dmitry Khlystov */ UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220, "Samsung", "YP-U3", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64), /* Reported by Vitaly Kuznetsov */ UNUSUAL_DEV( 0x04e8, 0x5122, 0x0000, 0x9999, "Samsung", "YP-CP3", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG), /* Entry and supporting patch by Theodore Kilgore . * Device uses standards-violating 32-byte Bulk Command Block Wrappers and * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011. */ UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, "Kobian Mercury", "Binocam DCB-132", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BULK32), /* Reported by Bob Sass -- only rev 1.33 tested */ UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133, "Belkin", "USB SCSI Adaptor", USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), /* Iomega Clik! Drive * Reported by David Chatenay * The reason this is needed is not fully known. */ UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100, "Iomega", "USB Clik! 40", USB_SC_8070, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Added by Alan Stern */ COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999, "Linux", "File-backed Storage Gadget", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_CAPACITY_OK ), /* Yakumo Mega Image 37 * Submitted by Stephan Fuhrmann */ UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100, "Tekom Technologies, Inc", "300_CAMERA", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Another Yakumo camera. * Reported by Michele Alzetta */ UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100, "Tekom Technologies, Inc", "300_CAMERA", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Iacopo Spalletti */ UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100, "Tekom Technologies, Inc", "300_CAMERA", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Yakumo Mega Image 47 * Reported by Bjoern Paetzel */ UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100, "Tekom Technologies, Inc", "400_CAMERA", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Paul Ortyl * Note that it's similar to the device above, only different prodID */ UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100, "Tekom Technologies, Inc", "400_CAMERA", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, "Sony", "DSC-S30/S70/S75/505V/F505/F707/F717/P8", USB_SC_SCSI, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ), /* Submitted by Lars Jacob * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610, "Sony", "DSC-T1/T5/H5", USB_SC_8070, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Reported by wim@geeks.nl */ UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, "Sony", "Memorystick NW-MS7", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Submitted by Olaf Hering, SuSE Bugzilla #49049 */ UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000, "Sony", "USB Floppy Drive", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100, "Sony", "Memorystick MSAC-US1", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Submitted by Klaus Mueller */ UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310, "Sony", "Handycam", USB_SC_SCSI, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Submitted by Rajesh Kumble Nayak */ UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500, "Sony", "Handycam HC-85", USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999, "Sony", "Memorystick MSC-U01N", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Submitted by Michal Mlotek */ UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999, "Sony", "PEG N760c Memorystick", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999, "Sony", "Memorystick MSC-U03", USB_SC_UFI, USB_PR_CB, NULL, US_FL_SINGLE_LUN ), /* Submitted by Nathan Babb */ UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999, "Sony", "PEG Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Submitted by Frank Engel */ UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999, "Sony", "PEG Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Submitted by Mike Alborn */ UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999, "Sony", "PEG Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* floppy reports multiple luns */ UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210, "SAMSUNG", "SFD-321U [FW 0C]", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* We keep this entry to force the transport; firmware 3.00 and later is ok. */ UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, "Y-E Data", "Flashbuster-U", USB_SC_DEVICE, USB_PR_CB, NULL, US_FL_SINGLE_LUN), /* Reported by Johann Cardon * This entry is needed only because the device reports * bInterfaceClass = 0xff (vendor-specific) */ UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, "Y-E Data", "Silicon Media R/W", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0), /* Reported by RTE */ UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141, "JetFlash", "TS1GJF2A/120", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), /* Fabrizio Fellini */ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, "Fujifilm", "Digital Camera EX-20 DSC", USB_SC_8070, USB_PR_DEVICE, NULL, 0 ), /* Reported by Andre Welter * This antique device predates the release of the Bulk-only Transport * spec, and if it gets a Get-Max-LUN then it requires the host to do a * Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent * us from sending the request. */ UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100, "Iomega", "ZIP 100", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Reported by */ UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000, "LaCie", "DVD+-RW", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_GO_SLOW ), /* Submitted by Joel Bourquard * Some versions of this device need the SubClass and Protocol overrides * while others don't. */ UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110, "In-System", "PyroGate External CD-ROM Enclosure (FCD-523)", USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_NEED_OVERRIDE ), /* Submitted by Sven Anderson * There are at least four ProductIDs used for iPods, so I added 0x1202 and * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears * to change with firmware updates, I changed the range to maximum for all * iPod entries. */ UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999, "Apple", "iPod", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* Reported by Avi Kivity */ UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999, "Apple", "iPod", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999, "Apple", "iPod", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999, "Apple", "iPod", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* * Reported by Tyson Vinson * This particular productId is the iPod Nano */ UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999, "Apple", "iPod", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* Reported by Dan Williams * Option N.V. mobile broadband modems * Ignore driver CD mode and force into modem mode by default. */ /* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */ UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999, "Option N.V.", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, 0), /* Reported by Blake Matheny */ UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, "Lexar", "USB CF Reader", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* The following two entries are for a Genesys USB to IDE * converter chip, but it changes its ProductId depending * on whether or not a disk or an optical device is enclosed * They were originally reported by Alexander Oltu * and Peter Marks * respectively. * * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz * as these flags were made and hard-coded * special-cases were pulled from scsiglue.c. */ UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Optical", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Disk", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), /* Reported by Ben Efros */ UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451, "Genesys Logic", "USB to SATA", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SANE_SENSE ), /* Reported by Hanno Boeck * Taken from the Lycoris Kernel */ UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999, "Vivitar", "Vivicam 35Xx", USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_FIX_INQUIRY ), UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, "TEAC", "Floppy Drive", USB_SC_UFI, USB_PR_CB, NULL, 0 ), /* Reported by Darsen Lu */ UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, "SigmaTel", "USBMSC Audio Player", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* Reported by Daniel Kukula */ UNUSUAL_DEV( 0x067b, 0x1063, 0x0100, 0x0100, "Prolific Technology, Inc.", "Prolific Storage Gadget", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BAD_SENSE ), /* Reported by Rogerio Brito */ UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001, "Prolific Technology, Inc.", "Mass Storage Device", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), /* Reported by Richard -=[]=- */ /* Change to bcdDeviceMin (0x0100 to 0x0001) reported by * Thomas Bartosik */ UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100, "Prolific Technology Inc.", "Mass Storage Device", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), /* Reported by Alex Butcher */ UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101, "Prolific Technology Inc.", "ATAPI-6 Bridge Controller", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), /* Submitted by Benny Sjostrand */ UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001, "Minolta", "Dimage F300", USB_SC_SCSI, USB_PR_BULK, NULL, 0 ), /* Reported by Miguel A. Fosas */ UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001, "Minolta", "DIMAGE E223", USB_SC_SCSI, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, "Hagiwara", "Flashgate", USB_SC_SCSI, USB_PR_BULK, NULL, 0 ), /* Reported by David Hamilton */ UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, "Thomson Multimedia Inc.", "RCA RD1080 MP3 Player", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* Reported by Adrian Pilchowiec */ UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, "RockChip", "MP3", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64 | US_FL_NO_READ_CAPACITY_16), /* Reported by Jean-Baptiste Onofre * Support the following product : * "Dane-Elec MediaTouch" */ UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000, "RockChip", "MTP", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), /* Reported by Massimiliano Ghilardi * This USB MP3/AVI player device fails and disconnects if more than 128 * sectors (64kB) are read/written in a single command, and may be present * at least in the following products: * "Magnex Digital Video Panel DVP 1800" * "MP4 AIGO 4GB SLOT SD" * "Teclast TL-C260 MP3" * "i.Meizu PMP MP3/MP4" * "Speed MV8 MP4 Audio Player" */ UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100, "RockChip", "ROCK MP3", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64), /* Reported by Olivier Blondeau */ UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100, "ATMEL", "SND1 Storage", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE), /* Submitted by Roman Hodek */ UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, "Sandisk", "ImageMate SDDR-05a", USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN ), UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009, "SanDisk Corporation", "ImageMate CompactFlash USB", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, "Sandisk", "ImageMate SDDR-12", USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN ), /* Reported by Eero Volotinen */ UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, "Freecom Technologies", "FHD-Classic", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, "Microtech", "USB-SCSI-DB25", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, "Microtech", "USB-SCSI-HD50", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), #ifdef NO_SDDR09 UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, "Microtech", "CameraMate", USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN ), #endif /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100 * Only revision 1.13 tested (same for all of the above devices, * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. * Submitted by Marek Michalkiewicz . * See also http://martin.wilck.bei.t-online.de/#kecf . */ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, "Datafab", "KECF-USB", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), /* Reported by Rauch Wolke * and augmented by binbin (Bugzilla #12882) */ UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, "Simple Tech/Datafab", "CF+SM Reader", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ), /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant * to the USB storage specification in two ways: * - They tell us they are using transport protocol CBI. In reality they * are using transport protocol CB. * - They don't like the INQUIRY command. So we must handle this command * of the SCSI layer ourselves. * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have * bInterfaceProtocol=0x00 (USB_PR_CBI) while others have 0x01 (USB_PR_CB). * So don't remove the USB_PR_CB override! * - Cameras with bcdDevice=0x9009 require the USB_SC_8070 override. */ UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999, "Casio", "QV DigitalCamera", USB_SC_8070, USB_PR_CB, NULL, US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ), /* Submitted by Hartmut Wahl */ UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, "Samsung", "Digimax 410", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), /* Reported by Luciano Rocha */ UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001, "Argosy", "Storage", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), /* Reported and patched by Nguyen Anh Quynh */ UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001, "Argosy", "Storage", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), /* Reported by Martijn Hijdra */ UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001, "Argosy", "Storage", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), /* Entry and supporting patch by Theodore Kilgore . * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support. */ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, "Grandtech", "DC2MEGA", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BULK32), /* Andrew Lunn * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL * on LUN 4. * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera" */ UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200, "PanDigital", "Photo Frame", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE), /* Submitted by Jan De Luyck */ UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000, "CITIZEN", "X1DE-USB", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN), /* Submitted by Dylan Taft * US_FL_IGNORE_RESIDUE Needed */ UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100, "AIPTEK", "Aiptek USB Keychain MP3 Player", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE), /* Entry needed for flags. Moreover, all devices with this ID use * bulk-only transport, but _some_ falsely report Control/Bulk instead. * One example is "Trumpion Digital Research MYMP3". * Submitted by Bjoern Brill */ UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, "Trumpion", "t33520 USB Flash Card Controller", USB_SC_DEVICE, USB_PR_BULK, NULL, US_FL_NEED_OVERRIDE ), /* Reported by Filippo Bardelli * The device reports a subclass of RBC, which is wrong. */ UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100, "Trumpion Microelectronics, Inc.", "33520 USB Digital Voice Recorder", USB_SC_UFI, USB_PR_DEVICE, NULL, 0), /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, "Trumpion", "MP3 player", USB_SC_RBC, USB_PR_BULK, NULL, 0 ), /* aeb */ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, "Feiya", "5-in-1 Card Reader", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), /* This Pentax still camera is not conformant * to the USB storage specification: - * - It does not like the INQUIRY command. So we must handle this command * of the SCSI layer ourselves. * Tested on Rev. 10.00 (0x1000) * Submitted by James Courtier-Dutton */ UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, "Pentax", "Optio 2/3/400", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* These are virtual windows driver CDs, which the zd1211rw driver * automatically converts into WLAN devices. */ UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, "ZyXEL", "G-220F USB-WLAN Install", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_DEVICE ), UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101, "SiteCom", "WL-117 USB-WLAN Install", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_DEVICE ), /* Reported by Dan Williams * Option N.V. mobile broadband modems * Ignore driver CD mode and force into modem mode by default. */ /* iCON 225 */ UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999, "Option N.V.", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, 0), /* Reported by F. Aben * This device (wrongly) has a vendor-specific device descriptor. * The entry is needed so usb-storage can bind to it's mass-storage * interface as an interface driver */ UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, "Option", "GI 0401 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), /* Reported by Jan Dumon * These devices (wrongly) have a vendor-specific device descriptor. * These entries are needed so usb-storage can bind to their mass-storage * interface as an interface driver */ UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, "Option", "GI 0431 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0x7701, 0x0000, 0x0000, "Option", "GI 0451 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0x7706, 0x0000, 0x0000, "Option", "GI 0451 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0x7901, 0x0000, 0x0000, "Option", "GI 0452 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0x7A01, 0x0000, 0x0000, "Option", "GI 0461 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0x7A05, 0x0000, 0x0000, "Option", "GI 0461 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0x8300, 0x0000, 0x0000, "Option", "GI 033x SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0x8302, 0x0000, 0x0000, "Option", "GI 033x SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0000, "Option", "GI 033x SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000, "Option", "GI 070x SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0xd057, 0x0000, 0x0000, "Option", "GI 1505 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0xd058, 0x0000, 0x0000, "Option", "GI 1509 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0xd157, 0x0000, 0x0000, "Option", "GI 1515 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0xd257, 0x0000, 0x0000, "Option", "GI 1215 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), UNUSUAL_DEV( 0x0af0, 0xd357, 0x0000, 0x0000, "Option", "GI 1505 SD-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0 ), /* Reported by Ben Efros */ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, "Seagate", "FreeAgent Pro", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SANE_SENSE ), UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999, "Maxtor", "USB to SATA", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SANE_SENSE), /* * Pete Zaitcev , bz#164688. * The device blatantly ignores LUN and returns 1 in GetMaxLUN. */ UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100, "Unknown", "Unknown", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), /* Submitted by Joris Struyve */ UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff, "Medion", "MD 7425", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), /* * Entry for Jenoptik JD 5200z3 * * email: car.busse@gmx.de */ UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200, "Jenoptik", "JD 5200 z3", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), /* Reported by Jason Johnston */ UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000, "Macpower Technology Co.LTD.", "USB 2.0 3.5\" DEVICE", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), /* Reported by Lubomir Blaha * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this * works for me. Can anybody correct these values? (I able to test corrected * version.) */ UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff, "Netac", "USB-CF-Card", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Reported by Edward Chapman (taken from linux-usb mailing list) Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */ UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999, "Netac", "USB Flash Disk", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Patch by Stephan Walter * I don't know why, but it works... */ UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012, "WINWARD", "Music Disk", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Ian McConnell */ UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012, "PNP_MP3", "PNP_MP3 PLAYER", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Jim McCloskey */ UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100, "Cowon Systems", "iAUDIO M5", USB_SC_DEVICE, USB_PR_BULK, NULL, US_FL_NEED_OVERRIDE ), /* Submitted by Antoine Mairesse */ UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300, "USB", "Solid state disk", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Submitted by Daniel Drake * Reported by dayul on the Gentoo Forums */ UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110, "Ours Technology", "Flash Disk", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Rastislav Stanik */ UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110, "USB", "Flash Disk", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Benjamin Schiller * It is also sold by Easylite as DJ 20 */ UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103, "Typhoon", "My DJ 1820", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64), /* Patch by Leonid Petrov mail at lpetrov.net * Reported by Robert Spitzenpfeil * http://www.qbik.ch/usb/devices/showdev.php?id=1705 * Updated to 103 device by MJ Ray mjr at phonecoop.coop */ UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100, "Oracom Co., Ltd", "ORC-200M", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* David Kuehling : * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI * errors when trying to write. */ UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, "C-MEX", "A-VOX", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Michael Stattmann */ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, "Sony Ericsson", "V800-Vodafone 802", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_WP_DETECT ), /* Reported by The Solutor */ UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000, "Sony Ericsson", "MD400", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_DEVICE), /* Reported by Jan Mate * and by Soeren Sonnenburg */ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, "Sony Ericsson", "P990i", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), /* Reported by Emmanuel Vasilakis */ UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, "Sony Ericsson", "M600i", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), /* Reported by Ricardo Barberis */ UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000, "Sony Ericsson", "P1i", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Kevin Cernekee * Tested on hardware version 1.10. * Entry is needed only for the initializer function override. * Devices with bcd > 110 seem to not need it while those * with bcd < 110 appear to need it. */ UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110, "Desknote", "UCR-61S2B", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_ucr61s2b_init, 0 ), UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999, "Western Digital", "External HDD", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_SANE_SENSE), /* Reported by Fabio Venturi * The device reports a vendor-specific bDeviceClass. */ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, "Actions Semiconductor", "Mtp device", USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0), /* Reported by Pascal Terjan * Ignore driver CD mode and force into modem mode by default. */ UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000, "D-Link", "USB Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE), /* Reported by Kevin Lloyd * Entry is needed for the initializer function override, * which instructs the device to load as a modem * device. */ UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999, "Sierra Wireless", "USB MMC Storage", USB_SC_DEVICE, USB_PR_DEVICE, sierra_ms_init, 0), /* Reported by Jaco Kroon * The usb-storage module found on the Digitech GNX4 (and supposedly other * devices) misbehaves and causes a bunch of invalid I/O errors. */ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, "Digitech HMG", "DigiTech Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by fangxiaozhi * This brings the HUAWEI data card devices into multi-port mode */ UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 0), /* Reported by Vilius Bilinkevicius */ UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, "SWISSBIT", "Black Silver", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Francesco Foresti */ UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, "Super Top", "IDE DEVICE", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Alexandre Oliva * JMicron responds to USN and several other SCSI ioctls with a * residue that causes subsequent I/O requests to fail. */ UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100, "JMicron", "USB to ATA/ATAPI Bridge", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), /* Reported by Robert Schedel * Note: this is a 'super top' device like the above 14cd/6600 device */ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, "Teac", "HD-35PUK-B", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Hans de Goede * These Appotech controllers are found in Picture Frames, they provide a * (buggy) emulation of a cdrom drive which contains the windows software * Uploading of pictures happens over the corresponding /dev/sg device. */ UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000, "BUILDWIN", "Photo Frame", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BAD_SENSE ), UNUSUAL_DEV( 0x1908, 0x1320, 0x0000, 0x0000, "BUILDWIN", "Photo Frame", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BAD_SENSE ), UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200, "BUILDWIN", "Photo Frame", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_READ_DISC_INFO ), /* Patch by Richard Schütz * This external hard drive enclosure uses a JMicron chip which * needs the US_FL_IGNORE_RESIDUE flag to work properly. */ UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000, "TrekStor GmbH & Co. KG", "DataStation maxi g.u", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, "ST", "2A", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), /* patch submitted by Davide Perini * and Renato Perini */ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, "Motorola", "RAZR V3x", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), /* * Patch by Constantin Baranov * Report by Andreas Koenecke. * Motorola ROKR Z6. */ UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101, "Motorola", "MSnc.", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG), /* Reported by Radovan Garabik */ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, "MPIO", "HS200", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_GO_SLOW ), /* Reported by Frederic Marchal * Mio Moov 330 */ UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000, "Mitac", "Mio DigiWalker USB Sync", USB_SC_DEVICE,USB_PR_DEVICE,NULL, US_FL_MAX_SECTORS_64 ), /* Reported by Andrey Rahmatullin */ UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100, "iRiver", "MP3 T10", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), /* Reported by Sergey Pinaev */ UNUSUAL_DEV( 0x4102, 0x1059, 0x0000, 0x0000, "iRiver", "P7K", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), /* * David Härdeman * The key makes the SCSI stack print confusing (but harmless) messages */ UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, "Iomega", "Micro Mini 1GB", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), /* Reported by Andrew Simmons */ UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, "DataStor", "USB4500 FW1.04", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_CAPACITY_HEURISTICS), /* Reported by Alessio Treglia */ UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001, "TGE", "Digital MP3 Audio Player", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), /* Control/Bulk transport for all SubClass values */ USUAL_DEV(USB_SC_RBC, USB_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_8020, USB_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_QIC, USB_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_UFI, USB_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_8070, USB_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_SCSI, USB_PR_CB, USB_US_TYPE_STOR), /* Control/Bulk/Interrupt transport for all SubClass values */ USUAL_DEV(USB_SC_RBC, USB_PR_CBI, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_8020, USB_PR_CBI, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_QIC, USB_PR_CBI, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_UFI, USB_PR_CBI, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_8070, USB_PR_CBI, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_SCSI, USB_PR_CBI, USB_US_TYPE_STOR), /* Bulk-only transport for all SubClass values */ USUAL_DEV(USB_SC_RBC, USB_PR_BULK, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_8020, USB_PR_BULK, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_QIC, USB_PR_BULK, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_UFI, USB_PR_BULK, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_8070, USB_PR_BULK, USB_US_TYPE_STOR), USUAL_DEV(USB_SC_SCSI, USB_PR_BULK, 0),