# # Traffic control configuration. # choice prompt "Packet scheduler clock source" depends on NET_SCHED default NET_SCH_CLK_JIFFIES help Packet schedulers need a monotonic clock that increments at a static rate. The kernel provides several suitable interfaces, each with different properties: - high resolution (us or better) - fast to read (minimal locking, no i/o access) - synchronized on all processors - handles cpu clock frequency changes but nothing provides all of the above. config NET_SCH_CLK_JIFFIES bool "Timer interrupt" help Say Y here if you want to use the timer interrupt (jiffies) as clock source. This clock source is fast, synchronized on all processors and handles cpu clock frequency changes, but its resolution is too low for accurate shaping except at very low speed. config NET_SCH_CLK_GETTIMEOFDAY bool "gettimeofday" help Say Y here if you want to use gettimeofday as clock source. This clock source has high resolution, is synchronized on all processors and handles cpu clock frequency changes, but it is slow. Choose this if you need a high resolution clock source but can't use the CPU's cycle counter. config NET_SCH_CLK_CPU bool "CPU cycle counter" depends on X86_TSC || X86_64 || ALPHA || SPARC64 || PPC64 || IA64 help Say Y here if you want to use the CPU's cycle counter as clock source. This is a cheap and high resolution clock source, but on some architectures it is not synchronized on all processors and doesn't handle cpu clock frequency changes. The useable cycle counters are: x86/x86_64 - Timestamp Counter alpha - Cycle Counter sparc64 - %ticks register ppc64 - Time base ia64 - Interval Time Counter Choose this if your CPU's cycle counter is working properly. endchoice config NET_SCH_CBQ tristate "CBQ packet scheduler" depends on NET_SCHED ---help--- Say Y here if you want to use the Class-Based Queueing (CBQ) packet scheduling algorithm for some of your network devices. This algorithm classifies the waiting packets into a tree-like hierarchy of classes; the leaves of this tree are in turn scheduled by separate algorithms (called "disciplines" in this context). See the top of for references about the CBQ algorithm. CBQ is a commonly used scheduler, so if you're unsure, you should say Y here. Then say Y to all the queueing algorithms below that you want to use as CBQ disciplines. Then say Y to "Packet classifier API" and say Y to all the classifiers you want to use; a classifier is a routine that allows you to sort your outgoing traffic into classes based on a certain criterion. To compile this code as a module, choose M here: the module will be called sch_cbq. config NET_SCH_HTB tristate "HTB packet scheduler" depends on NET_SCHED ---help--- Say Y here if you want to use the Hierarchical Token Buckets (HTB) packet scheduling algorithm for some of your network devices. See for complete manual and in-depth articles. HTB is very similar to the CBQ regarding its goals however is has different properties and different algorithm. To compile this code as a module, choose M here: the module will be called sch_htb. config NET_SCH_HFSC tristate "HFSC packet scheduler" depends on NET_SCHED ---help--- Say Y here if you want to use the Hierarchical Fair Service Curve (HFSC) packet scheduling algorithm for some of your network devices. To compile this code as a module, choose M here: the module will be called sch_hfsc. #tristate ' H-PFQ packet scheduler' CONFIG_NET_SCH_HPFQ config NET_SCH_ATM tristate "ATM pseudo-scheduler" depends on NET_SCHED && ATM ---help--- Say Y here if you want to use the ATM pseudo-scheduler. This provides a framework for invoking classifiers (aka "filters"), which in turn select classes of this queuing discipline. Each class maps the flow(s) it is handling to a given virtual circuit (see the top of ). To compile this code as a module, choose M here: the module will be called sch_atm. config NET_SCH_PRIO tristate "The simplest PRIO pseudoscheduler" depends on NET_SCHED help Say Y here if you want to use an n-band priority queue packet "scheduler" for some of your network devices or as a leaf discipline for the CBQ scheduling algorithm. If unsure, say Y. To compile this code as a module, choose M here: the module will be called sch_prio. config NET_SCH_RED tristate "RED queue" depends on NET_SCHED help Say Y here if you want to use the Random Early Detection (RED) packet scheduling algorithm for some of your network devices (see the top of for details and references about the algorithm). To compile this code as a module, choose M here: the module will be called sch_red. config NET_SCH_SFQ tristate "SFQ queue" depends on NET_SCHED ---help--- Say Y here if you want to use the Stochastic Fairness Queueing (SFQ) packet scheduling algorithm for some of your network devices or as a leaf discipline for the CBQ scheduling algorithm (see the top of for details and references about the SFQ algorithm). To compile this code as a module, choose M here: the module will be called sch_sfq. config NET_SCH_TEQL tristate "TEQL queue" depends on NET_SCHED ---help--- Say Y here if you want to use the True Link Equalizer (TLE) packet scheduling algorithm for some of your network devices or as a leaf discipline for the CBQ scheduling algorithm. This queueing discipline allows the combination of several physical devices into one virtual device. (see the top of for details). To compile this code as a module, choose M here: the module will be called sch_teql. config NET_SCH_TBF tristate "TBF queue" depends on NET_SCHED help Say Y here if you want to use the Simple Token Bucket Filter (TBF) packet scheduling algorithm for some of your network devices or as a leaf discipline for the CBQ scheduling algorithm (see the top of for a description of the TBF algorithm). To compile this code as a module, choose M here: the module will be called sch_tbf. config NET_SCH_GRED tristate "GRED queue" depends on NET_SCHED help Say Y here if you want to use the Generic Random Early Detection (GRED) packet scheduling algorithm for some of your network devices (see the top of for details and references about the algorithm). To compile this code as a module, choose M here: the module will be called sch_gred. config NET_SCH_DSMARK tristate "Diffserv field marker" depends on NET_SCHED help Say Y if you want to schedule packets according to the Differentiated Services architecture proposed in RFC 2475. Technical information on this method, with pointers to associated RFCs, is available at . To compile this code as a module, choose M here: the module will be called sch_dsmark. config NET_SCH_NETEM tristate "Network emulator" depends on NET_SCHED help Say Y if you want to emulate network delay, loss, and packet re-ordering. This is often useful to simulate networks when testing applications or protocols. To compile this driver as a module, choose M here: the module will be called sch_netem. If unsure, say N. config NET_SCH_INGRESS tristate "Ingress Qdisc" depends on NET_SCHED help If you say Y here, you will be able to police incoming bandwidth and drop packets when this bandwidth exceeds your desired rate. If unsure, say Y. To compile this code as a module, choose M here: the module will be called sch_ingress. config NET_QOS bool "QoS support" depends on NET_SCHED ---help--- Say Y here if you want to include Quality Of Service scheduling features, which means that you will be able to request certain rate-of-flow limits for your network devices. This Quality of Service (QoS) support will enable you to use Differentiated Services (diffserv) and Resource Reservation Protocol (RSVP) on your Linux router if you also say Y to "Packet classifier API" and to some classifiers below. Documentation and software is at . Note that the answer to this question won't directly affect the kernel: saying N will just cause the configurator to skip all the questions about QoS support. config NET_ESTIMATOR bool "Rate estimator" depends on NET_QOS help In order for Quality of Service scheduling to work, the current rate-of-flow for a network device has to be estimated; if you say Y here, the kernel will do just that. config NET_CLS bool "Packet classifier API" depends on NET_SCHED ---help--- The CBQ scheduling algorithm requires that network packets which are scheduled to be sent out over a network device be classified according to some criterion. If you say Y here, you will get a choice of several different packet classifiers with the following questions. This will enable you to use Differentiated Services (diffserv) and Resource Reservation Protocol (RSVP) on your Linux router. Documentation and software is at . config NET_CLS_BASIC tristate "Basic classifier" depends on NET_CLS ---help--- Say Y here if you want to be able to classify packets using only extended matches and actions. To compile this code as a module, choose M here: the module will be called cls_basic. config NET_CLS_TCINDEX tristate "TC index classifier" depends on NET_CLS help If you say Y here, you will be able to classify outgoing packets according to the tc_index field of the skb. You will want this feature if you want to implement Differentiated Services using sch_dsmark. If unsure, say Y. To compile this code as a module, choose M here: the module will be called cls_tcindex. config NET_CLS_ROUTE4 tristate "Routing table based classifier" depends on NET_CLS select NET_CLS_ROUTE help If you say Y here, you will be able to classify outgoing packets according to the route table entry they matched. If unsure, say Y. To compile this code as a module, choose M here: the module will be called cls_route. config NET_CLS_ROUTE bool default n config NET_CLS_FW tristate "Firewall based classifier" depends on NET_CLS help If you say Y here, you will be able to classify outgoing packets according to firewall criteria you specified. To compile this code as a module, choose M here: the module will be called cls_fw. config NET_CLS_U32 tristate "U32 classifier" depends on NET_CLS help If you say Y here, you will be able to classify outgoing packets according to their destination address. If unsure, say Y. To compile this code as a module, choose M here: the module will be called cls_u32. config CLS_U32_PERF bool "U32 classifier performance counters" depends on NET_CLS_U32 help gathers stats that could be used to tune u32 classifier performance. Requires a new iproute2 You MUST NOT turn this on if you dont have an update iproute2. config NET_CLS_IND bool "classify input device (slows things u32/fw) " depends on NET_CLS_U32 || NET_CLS_FW help This option will be killed eventually when a metadata action appears because it slows things a little Available only for u32 and fw classifiers. Requires a new iproute2 You MUST NOT turn this on if you dont have an update iproute2. config CLS_U32_MARK bool "Use nfmark as a key in U32 classifier" depends on NET_CLS_U32 && NETFILTER help This allows you to match mark in a u32 filter. Example: tc filter add dev eth0 protocol ip parent 1:0 prio 5 u32 \ match mark 0x0090 0xffff \ match ip dst 4.4.4.4 \ flowid 1:90 You must use a new iproute2 to use this feature. config NET_CLS_RSVP tristate "Special RSVP classifier" depends on NET_CLS && NET_QOS ---help--- The Resource Reservation Protocol (RSVP) permits end systems to request a minimum and maximum data flow rate for a connection; this is important for real time data such as streaming sound or video. Say Y here if you want to be able to classify outgoing packets based on their RSVP requests. To compile this code as a module, choose M here: the module will be called cls_rsvp. config NET_CLS_RSVP6 tristate "Special RSVP classifier for IPv6" depends on NET_CLS && NET_QOS ---help--- The Resource Reservation Protocol (RSVP) permits end systems to request a minimum and maximum data flow rate for a connection; this is important for real time data such as streaming sound or video. Say Y here if you want to be able to classify outgoing packets based on their RSVP requests and you are using the new Internet Protocol IPv6 as opposed to the older and more common IPv4. To compile this code as a module, choose M here: the module will be called cls_rsvp6. config NET_EMATCH bool "Extended Matches" depends on NET_CLS ---help--- Say Y here if you want to use extended matches on top of classifiers and select the extended matches below. Extended matches are small classification helpers not worth writing a separate classifier. You must have a recent version of the iproute2 tools in order to use extended matches. config NET_EMATCH_STACK int "Stack size" depends on NET_EMATCH default "32" ---help--- Size of the local stack variable used while evaluating the tree of ematches. Limits the depth of the tree, i.e. the number of encapsulated precedences. Every level requires 4 bytes of additional stack space. config NET_EMATCH_CMP tristate "Simple packet data comparison" depends on NET_EMATCH ---help--- Say Y here if you want to be able to classify packets based on simple packet data comparisons for 8, 16, and 32bit values. To compile this code as a module, choose M here: the module will be called em_cmp. config NET_EMATCH_NBYTE tristate "Multi byte comparison" depends on NET_EMATCH ---help--- Say Y here if you want to be able to classify packets based on multiple byte comparisons mainly useful for IPv6 address comparisons. To compile this code as a module, choose M here: the module will be called em_nbyte. config NET_EMATCH_U32 tristate "U32 hashing key" depends on NET_EMATCH ---help--- Say Y here if you want to be able to classify packets using the famous u32 key in combination with logic relations. To compile this code as a module, choose M here: the module will be called em_u32. config NET_EMATCH_META tristate "Metadata" depends on NET_EMATCH ---help--- Say Y here if you want to be ablt to classify packets based on metadata such as load average, netfilter attributes, socket attributes and routing decisions. To compile this code as a module, choose M here: the module will be called em_meta. config NET_EMATCH_TEXT tristate "Textsearch" depends on NET_EMATCH select TEXTSEARCH ---help--- Say Y here if you want to be ablt to classify packets based on textsearch comparisons. Please select the appropriate textsearch algorithms in the Library section. To compile this code as a module, choose M here: the module will be called em_text. config NET_CLS_ACT bool "Packet ACTION" depends on EXPERIMENTAL && NET_CLS && NET_QOS ---help--- This option requires you have a new iproute2. It enables tc extensions which can be used with tc classifiers. You MUST NOT turn this on if you dont have an update iproute2. config NET_ACT_POLICE tristate "Policing Actions" depends on NET_CLS_ACT ---help--- If you are using a newer iproute2 select this one, otherwise use one below to select a policer. You MUST NOT turn this on if you dont have an update iproute2. config NET_ACT_GACT tristate "generic Actions" depends on NET_CLS_ACT ---help--- You must have new iproute2 to use this feature. This adds simple filtering actions like drop, accept etc. config GACT_PROB bool "generic Actions probability" depends on NET_ACT_GACT ---help--- Allows generic actions to be randomly or deterministically used. config NET_ACT_MIRRED tristate "Packet In/Egress redirecton/mirror Actions" depends on NET_CLS_ACT ---help--- requires new iproute2 This allows packets to be mirrored or redirected to netdevices config NET_ACT_IPT tristate "iptables Actions" depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES ---help--- requires new iproute2 This allows iptables targets to be used by tc filters config NET_ACT_PEDIT tristate "Generic Packet Editor Actions" depends on NET_CLS_ACT ---help--- requires new iproute2 This allows for packets to be generically edited config NET_CLS_POLICE bool "Traffic policing (needed for in/egress)" depends on NET_CLS && NET_QOS && NET_CLS_ACT!=y help Say Y to support traffic policing (bandwidth limits). Needed for ingress and egress rate limiting. config NET_ACT_SIMP tristate "Simple action" depends on NET_CLS_ACT ---help--- You must have new iproute2 to use this feature. This adds a very simple action for demonstration purposes The idea is to give action authors a basic example to look at. All this action will do is print on the console the configured policy string followed by _ then packet count.