blob: 4527de3ea205d176f0425f9512e6bf560a2d3ce3 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
|
* Samsung Exynos5410 Clock Controller
The Exynos5410 clock controller generates and supplies clock to various
controllers within the Exynos5410 SoC.
Required Properties:
- compatible: should be "samsung,exynos5410-clock"
- reg: physical base address of the controller and length of memory mapped
region.
- #clock-cells: should be 1.
- clocks: should contain an entry specifying the root clock from external
oscillator supplied through XXTI or XusbXTI pin. This clock should be
defined using standard clock bindings with "fin_pll" clock-output-name.
That clock is being passed internally to the 9 PLLs.
All available clocks are defined as preprocessor macros in
dt-bindings/clock/exynos5410.h header and can be used in device
tree sources.
Example 1: An example of a clock controller node is listed below.
fin_pll: xxti {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "fin_pll";
#clock-cells = <0>;
};
clock: clock-controller@0x10010000 {
compatible = "samsung,exynos5410-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;
clocks = <&fin_pll>;
};
Example 2: UART controller node that consumes the clock generated by the clock
controller. Refer to the standard clock bindings for information
about 'clocks' and 'clock-names' property.
serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 51 0>;
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
|
