1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
* Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
*/
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/system_misc.h>
#include <asm/proc-fns.h>
#include <asm/mach-types.h>
#include <asm/hardware/cache-l2x0.h>
#include "common.h"
#include "hardware.h"
static void __iomem *wdog_base;
static struct clk *wdog_clk;
static int wcr_enable = (1 << 2);
/*
* Reset the system. It is called by machine_restart().
*/
void mxc_restart(enum reboot_mode mode, const char *cmd)
{
if (!wdog_base)
goto reset_fallback;
if (!IS_ERR(wdog_clk))
clk_enable(wdog_clk);
/* Assert SRS signal */
imx_writew(wcr_enable, wdog_base);
/*
* Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be
* written twice), we add another two writes to ensure there must be at
* least two writes happen in the same one 32kHz clock period. We save
* the target check here, since the writes shouldn't be a huge burden
* for other platforms.
*/
imx_writew(wcr_enable, wdog_base);
imx_writew(wcr_enable, wdog_base);
/* wait for reset to assert... */
mdelay(500);
pr_err("%s: Watchdog reset failed to assert reset\n", __func__);
/* delay to allow the serial port to show the message */
mdelay(50);
reset_fallback:
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}
void __init mxc_arch_reset_init(void __iomem *base)
{
wdog_base = base;
wdog_clk = clk_get_sys("imx2-wdt.0", NULL);
if (IS_ERR(wdog_clk))
pr_warn("%s: failed to get wdog clock\n", __func__);
else
clk_prepare(wdog_clk);
}
#ifdef CONFIG_SOC_IMX1
void __init imx1_reset_init(void __iomem *base)
{
wcr_enable = (1 << 0);
mxc_arch_reset_init(base);
}
#endif
#ifdef CONFIG_CACHE_L2X0
void __init imx_init_l2cache(void)
{
void __iomem *l2x0_base;
struct device_node *np;
unsigned int val;
np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
if (!np)
return;
l2x0_base = of_iomap(np, 0);
if (!l2x0_base)
goto put_node;
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
/* Configure the L2 PREFETCH and POWER registers */
val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL);
val |= L310_PREFETCH_CTRL_DBL_LINEFILL |
L310_PREFETCH_CTRL_INSTR_PREFETCH |
L310_PREFETCH_CTRL_DATA_PREFETCH;
/* Set perfetch offset to improve performance */
val &= ~L310_PREFETCH_CTRL_OFFSET_MASK;
val |= 15;
writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL);
}
iounmap(l2x0_base);
put_node:
of_node_put(np);
}
#endif
|
