bcm53xx: backport XHCI patch modifying xhci_run_finished()

This will help switching to newer 5.15 kernels. This backport required
rebasing Northstar's USB host patch.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

2 files changed, 96 insertions, 27 deletions

diff --git a/target/linux/bcm53xx/patches-5.15/081-xhci-Keep-interrupt-disabled-in-initialization-until.patch b/target/linux/bcm53xx/patches-5.15/081-xhci-Keep-interrupt-disabled-in-initialization-until.patch
new file mode 100644
index 0000000000..78b3aa85e3
--- /dev/null
+++ b/target/linux/bcm53xx/patches-5.15/081-xhci-Keep-interrupt-disabled-in-initialization-until.patch
@@ -0,0 +1,87 @@
+From a808925075fb750804a60ff0710614466c396db4 Mon Sep 17 00:00:00 2001
+From: Hongyu Xie <xy521521@gmail.com>
+Date: Thu, 23 Jun 2022 14:19:42 +0300
+Subject: [PATCH] xhci: Keep interrupt disabled in initialization until host is
+ running.
+
+irq is disabled in xhci_quiesce(called by xhci_halt, with bit:2 cleared
+in USBCMD register), but xhci_run(called by usb_add_hcd) re-enable it.
+It's possible that you will receive thousands of interrupt requests
+after initialization for 2.0 roothub. And you will get a lot of
+warning like, "xHCI dying, ignoring interrupt. Shouldn't IRQs be
+disabled?". This amount of interrupt requests will cause the entire
+system to freeze.
+This problem was first found on a device with ASM2142 host controller
+on it.
+
+[tidy up old code while moving it, reword header -Mathias]
+
+Cc: stable@kernel.org
+Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
+Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
+Link: https://lore.kernel.org/r/20220623111945.1557702-2-mathias.nyman@linux.intel.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/host/xhci.c | 35 ++++++++++++++++++++++-------------
+ 1 file changed, 22 insertions(+), 13 deletions(-)
+
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -611,8 +611,27 @@ static int xhci_init(struct usb_hcd *hcd
+ 
+ static int xhci_run_finished(struct xhci_hcd *xhci)
+ {
++	unsigned long	flags;
++	u32		temp;
++
++	/*
++	 * Enable interrupts before starting the host (xhci 4.2 and 5.5.2).
++	 * Protect the short window before host is running with a lock
++	 */
++	spin_lock_irqsave(&xhci->lock, flags);
++
++	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Enable interrupts");
++	temp = readl(&xhci->op_regs->command);
++	temp |= (CMD_EIE);
++	writel(temp, &xhci->op_regs->command);
++
++	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Enable primary interrupter");
++	temp = readl(&xhci->ir_set->irq_pending);
++	writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending);
++
+ 	if (xhci_start(xhci)) {
+ 		xhci_halt(xhci);
++		spin_unlock_irqrestore(&xhci->lock, flags);
+ 		return -ENODEV;
+ 	}
+ 	xhci->shared_hcd->state = HC_STATE_RUNNING;
+@@ -623,6 +642,9 @@ static int xhci_run_finished(struct xhci
+ 
+ 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ 			"Finished xhci_run for USB3 roothub");
++
++	spin_unlock_irqrestore(&xhci->lock, flags);
++
+ 	return 0;
+ }
+ 
+@@ -671,19 +693,6 @@ int xhci_run(struct usb_hcd *hcd)
+ 	temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
+ 	writel(temp, &xhci->ir_set->irq_control);
+ 
+-	/* Set the HCD state before we enable the irqs */
+-	temp = readl(&xhci->op_regs->command);
+-	temp |= (CMD_EIE);
+-	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+-			"// Enable interrupts, cmd = 0x%x.", temp);
+-	writel(temp, &xhci->op_regs->command);
+-
+-	temp = readl(&xhci->ir_set->irq_pending);
+-	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+-			"// Enabling event ring interrupter %p by writing 0x%x to irq_pending",
+-			xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
+-	writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending);
+-
+ 	if (xhci->quirks & XHCI_NEC_HOST) {
+ 		struct xhci_command *command;
+ 
diff --git a/target/linux/bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
index 17013c75ba..49277ab251 100644
--- a/target/linux/bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
+++ b/target/linux/bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
@@ -90,41 +90,23 @@ it on BCM4708 family.
  /*
   * Reset a halted HC.
   *
-@@ -611,10 +654,20 @@ static int xhci_init(struct usb_hcd *hcd
- 
- static int xhci_run_finished(struct xhci_hcd *xhci)
- {
--	if (xhci_start(xhci)) {
--		xhci_halt(xhci);
--		return -ENODEV;
-+	int err;
-+
-+	err = xhci_start(xhci);
-+	if (err) {
-+		err = -ENODEV;
-+		goto err_halt;
+@@ -634,6 +677,16 @@ static int xhci_run_finished(struct xhci
+ 		spin_unlock_irqrestore(&xhci->lock, flags);
+ 		return -ENODEV;
  	}
 +
 +	if (xhci->quirks & XHCI_FAKE_DOORBELL) {
-+		err = xhci_fake_doorbell(xhci, 1);
-+		if (err)
-+			goto err_halt;
++		int err = xhci_fake_doorbell(xhci, 1);
++		if (err) {
++			xhci_halt(xhci);
++			spin_unlock_irqrestore(&xhci->lock, flags);
++			return err;
++		}
 +	}
 +
  	xhci->shared_hcd->state = HC_STATE_RUNNING;
  	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
  
-@@ -624,6 +677,10 @@ static int xhci_run_finished(struct xhci
- 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- 			"Finished xhci_run for USB3 roothub");
- 	return 0;
-+
-+err_halt:
-+	xhci_halt(xhci);
-+	return err;
- }
- 
- /*
 --- a/drivers/usb/host/xhci.h
 +++ b/drivers/usb/host/xhci.h
 @@ -1908,6 +1908,7 @@ struct xhci_hcd {