diff options
author | David Bauer <mail@david-bauer.net> | 2018-10-31 20:19:49 +0100 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2018-11-26 12:05:45 +0100 |
commit | 946ffe470d923fdde53db68592437194e0c276fc (patch) | |
tree | 2c58bfacae446fcb27ef3ac05d68254dab0c6b68 /target/linux/ath79/base-files/etc/board.d/02_network | |
parent | 89eb1a6d7250c33ff5b43f4af3c0c78ffd3d8eb9 (diff) | |
download | openwrt-946ffe470d923fdde53db68592437194e0c276fc.tar.gz openwrt-946ffe470d923fdde53db68592437194e0c276fc.tar.bz2 openwrt-946ffe470d923fdde53db68592437194e0c276fc.zip |
ath79: add support for Archer C58/C59 v1
This commit adds support for the Archer C58 v1 and C59 v1, previously
supported in the ar71xx target.
CPU: Qualcomm QCA9561
RAM: 64M (C58) / 128M (C59)
FLASH: 8M (C58) / 16M (C59)
WiFi: QCA9561 bgn 3x3:3
QCA9888 nac 2x2:2
LED: Power, WiFi 2.4, WiFi 5, WAN green, WAN amber, LAN, WPS
Only C59: USB
BTN: WPS, WiFi, Reset
Installation
------------
Via Web-UI:
Update factory image via Web-UI.
Via TFTP:
Rename factory image to "tp_recovery.bin" and place it in the root-dir
of your tftp server. Configure to listen on 192.168.0.66. Power up the
router while holding down the reset-button. The router will flash itself
and reboot.
Note: For TFTP, you might need a switch between router and computer, as
link establishment might take to long.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/base-files/etc/board.d/02_network')
-rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index fca9e42fb5..6aca7c7899 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -32,7 +32,9 @@ ath79_setup_interfaces() wd,mynet-wifi-rangeextender) ucidef_set_interface_lan "eth0" ;; - avm,fritz4020) + avm,fritz4020|\ + tplink,archer-c58-v1|\ + tplink,archer-c59-v1) ucidef_set_interface_wan "eth0" ucidef_add_switch "switch0" \ "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" |