ipq40xx: OpenMesh A42 overhaul

Sort the soc entries in the dts by address and use dtc labels whenever
possible.

Adjust the DTS files, the OpenMesh A42 is actually an IPQ4018 and not an
IPQ4019.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

3 files changed, 81 insertions, 88 deletions

diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a42.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts
index 887be993e8..772465cc2e 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a42.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts
@@ -47,6 +47,14 @@
 	};
 
 	soc {
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
 		tcsr@194b000 {
 			/* select hostmode */
 			compatible = "qcom,tcsr";
@@ -55,75 +63,26 @@
 			status = "ok";
 		};
 
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
 		tcsr@1949000 {
 			compatible = "qcom,tcsr";
 			reg = <0x1949000 0x100>;
 			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
 		};
 
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
 		tcsr@1957000 {
 			compatible = "qcom,tcsr";
 			reg = <0x1957000 0x100>;
 			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
 		};
 
-		pinctrl@1000000 {
-			serial_pins: serial_pinmux {
-				mux {
-					pins = "gpio60", "gpio61";
-					function = "blsp_uart0";
-					bias-disable;
-				};
-			};
-
-			spi_0_pins: spi_0_pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio55", "gpio56", "gpio57";
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio54";
-				};
-				pinconf {
-					pins = "gpio55", "gpio56", "gpio57";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				pinconf_cs {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-disable;
-					output-high;
-				};
-			};
-		};
-
-		blsp_dma: dma@7884000 {
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
+		usb2: usb2@60f8800 {
 			status = "ok";
-			cs-gpios = <&tlmm 54 0>;
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <24000000>;
-
-				/* partitions are passed via bootloader */
-			};
 		};
 
 		serial@78af000 {
@@ -132,10 +91,6 @@
 			status = "ok";
 		};
 
-		cryptobam: dma@8e04000 {
-			status = "ok";
-		};
-
 		crypto@8e3a000 {
 			status = "ok";
 		};
@@ -144,39 +99,13 @@
 			status = "ok";
 		};
 
-		usb2_hs_phy: hsphy@a8000 {
-			status = "ok";
-		};
-
-		usb2: usb2@60f8800 {
-			status = "ok";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
 		ess-switch@c000000 {
 			status = "okay";
 		};
 
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
 		edma@c080000 {
 			status = "okay";
 		};
-
-		wifi@a000000 {
-			status = "okay";
-			qcom,ath10k-calibration-variant = "OM-A42";
-		};
-
-		wifi@a800000 {
-			status = "okay";
-			qcom,ath10k-calibration-variant = "OM-A42";
-		};
 	};
 
 	gpio-keys {
@@ -227,6 +156,56 @@
 	};
 };
 
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pin_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+	cs-gpios = <&tlmm 54 0>;
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		/* partitions are passed via bootloader */
+	};
+};
+
+&cryptobam {
+	status = "ok";
+};
+
 &gmac0 {
 	qcom,phy_mdio_addr = <4>;
 	qcom,poll_required = <1>;
@@ -242,3 +221,17 @@
 	qcom,forced_duplex = <1>;
 	vlan_tag = <1 0x10>;
 };
+
+&usb2_hs_phy {
+	status = "ok";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "OM-A42";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "OM-A42";
+};
diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile
index e584b6fb1a..eb26082be7 100644
--- a/target/linux/ipq40xx/image/Makefile
+++ b/target/linux/ipq40xx/image/Makefile
@@ -61,7 +61,7 @@ TARGET_DEVICES += glinet_gl-b1300
 
 define Device/openmesh_a42
 	$(call Device/FitImageLzma)
-	DEVICE_DTS := qcom-ipq4019-a42
+	DEVICE_DTS := qcom-ipq4018-a42
 	BLOCKSIZE := 64k
 	SUPPORTED_DEVICES := openmesh,a42
 	DEVICE_TITLE := OpenMesh A42
diff --git a/target/linux/ipq40xx/patches-4.14/069-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.14/069-arm-boot-add-dts-files.patch
index e830565c84..128669f7c4 100644
--- a/target/linux/ipq40xx/patches-4.14/069-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq40xx/patches-4.14/069-arm-boot-add-dts-files.patch
@@ -14,7 +14,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
  	qcom-apq8074-dragonboard.dtb \
  	qcom-apq8084-ifc6540.dtb \
  	qcom-apq8084-mtp.dtb \
-+	qcom-ipq4019-a42.dtb \
++	qcom-ipq4018-a42.dtb \
  	qcom-ipq4019-ap.dk01.1-c1.dtb \
 +	qcom-ipq4019-ap.dk04.1-c1.dtb \
 +	qcom-ipq4019-fritz4040.dtb \