diff options
Diffstat (limited to 'target/linux/mvebu')
| -rw-r--r-- | target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network | 9 | ||||
| -rw-r--r-- | target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 47 |
2 files changed, 55 insertions, 1 deletions
diff --git a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network index 489090d77c..6789edb861 100644 --- a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network @@ -21,9 +21,16 @@ globalscale,espressobin-ultra) ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan" ;; marvell,armada-3720-db|\ -methode,udpu|\ +methode,udpu) + ucidef_set_interfaces_lan_wan "eth1" "eth0" + ;; methode,edpu) + # eDPU+ has a 88E6361 switch, so we check for it + if ip link | grep -q uplink; then + ucidef_set_interfaces_lan_wan "downlink" "uplink" + else ucidef_set_interfaces_lan_wan "eth1" "eth0" + fi ;; *) ucidef_set_interface_lan "eth0" diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts index 4db8b946df..35f107b63b 100644 --- a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts +++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts @@ -17,3 +17,50 @@ ð0 { phy-mode = "1000base-x"; }; + +/* + * External MV88E6361 switch is only available on v2 of the board. + * U-Boot will enable the MDIO bus and switch nodes. + */ +&mdio { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&smi_pins>; + + /* Actual device is MV88E6361 */ + switch: switch@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + ethernet = <ð0>; + }; + + port@9 { + reg = <9>; + label = "downlink"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + + port@a { + reg = <10>; + label = "uplink"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + sfp = <&sfp_eth1>; + }; + }; + }; +}; |