summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* apm821xx: restore 6.1 config+patchesChristian Lamparter2024-04-055-0/+374
| | | | | | | simply attached previous versions of the config-6.1 and patches-6.1 directory. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add 6.6 testing kernelChristian Lamparter2024-04-056-8/+33
| | | | | | | | | refreshed kernel config + patches otherwise same as 6.1/5.15. Tested on: WNDAP620, WNDAP660, MyBook Live Single, MR24, MX60, WNDR4700 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: prepare WNDR4700 for 6.6 - add preliminary u-boot-env accessChristian Lamparter2024-04-054-5/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the default BUILD_BOT configuration on a linux 6.6 kernel, the WNDR4700's kernel no longer fits into the alloted ~3.5MiB, even with LZMA compression. Bigger kernels are possible, but there's a problem with Netgear's "bootcmd": > if loadn_dniimg 0 0x180000 0x4e0000 && chk_dniimg 0x4e0000; then nand read 0x800000 0x180000 0x20000;bootm 0x500000 - 0x800040;else fw_recovery; fi" This loads the dni-image starting offset 0x180000 from the NAND flash (which is the DTB partition) to 0x4e0000 in the RAM. It then checks whenever the provided image is "valid". If it is then it reads the DTB again to 0x800000 in the RAM and starts the extraction and boot process. (If the image wasn't valid then it starts the automated firmware recovery). The issues here are that first: the kernel image gets "squeezed" between 0x500040 and 0x7fffff... And second, the decompressor only has area 0x0 - 0x500000 for decompression. Hence the image now requires to update the bootcmd by providing new values (which have been successfully tested with the original Netgear WNDR4700 v1.0.0.56 firmware) for the RAM locations and make full use of the fact that loadn_dniimg loads the DTB as well. This needs to be done only once. Just connect a serial adapter to interface with uboot and overwrite (and save) the new bootcmd. WARNING: The serial port needs a TTL/RS-232 3.3v level converter! Steps: 0. Power-off the WNDR4700 1. Connect the serial interface (you need to open the WNDR4700) 2. Power-up the WNDR4700 3. Monitor the boot-sequence and hit "Enter"-key when it says: "Hit any key to stop autoboot" (Be quick, you have a ~2 second window) 4. in the Prompt enter the following commands (copy & paste) setenv bootcmd "if loadn_dniimg 0 0x180000 0xce0000 && chk_dniimg 0xce0000; then bootm 0xd00000 - 0xce0040;else fw_recovery; fi" saveenv run bootcmd Note: This new bootcmd will also unbrick devices that were bricked by the bigger 4.19-6.1 kernels. Note2: This method was tested with a WNDR4700. A big kernel with most debug features enabled on v6.6.22 measured 4.30 MiB when compressed with lzma. The uncompressed kernel is 12.34 MiB. This is over the 3 MiB, the device reserves for the kernel... But it booted! For bigger kernels, the device needs repartitioning of the the ubi partition due to the kernel+dtb not fitting into the partition. Note3: For initramfs development. I would advice to load the initramfs images to 0x800000 (or higher). i.e.: tftp 800000 wndr4700.bin Note4: the fw_recovery uboot command to transfer the factory image to the flash still works. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: 6.6: set testing kernelMieczyslaw Nalewaj2024-04-051-0/+1
| | | | | | Allow selecting 6.6 as testing kernel on ramips. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: 6.6: refresh kernel configMieczyslaw Nalewaj2024-04-056-49/+96
| | | | | | Refresh kernel config. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: adjusted pinctrl-aw9523 for kernel 6.6Mieczyslaw Nalewaj2024-04-051-0/+8
| | | | | | | | Compatiblity with kernel 6.6 for Awinic AW9523B i2c pin controller driver. It follows the kernel patch: i2c: Drop legacy callback .probe_new() (https://github.com/torvalds/linux/commit/5eb1e6e459cfa025f79c43014f66ff62a55542f1) and kernel patch: gpiolib: Get rid of not used of_node member (https://github.com/torvalds/linux/commit/70d0fc4288dabd65025fde7774b4f9262afa9034) Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: mt7620: alignment with updated snd_soc_dai_driver structureMieczyslaw Nalewaj2024-04-051-2/+2
| | | | | | | Fix error: 'struct snd_soc_dai_driver' has no member named 'remove' It follows the kernel patch: ASoC: soc-dai.h: remove unused call back functions (https://github.com/torvalds/linux/commit/446b31e894935ebbcf84302061a4e0e2efb2368f) Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* generic: fix detect_memory_region() functionShiji Yang2024-04-051-0/+56
| | | | | | | This patch fixes the broken detect_memory_region() function on 6.6 kernel. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: 6.6: fix net drivers compatibilityMieczyslaw Nalewaj2024-04-052-0/+16
| | | | | | | Fix compatibility of ralink net drivers with kernel 6.6. It follows the kernel patch: u64_stats: Streamline the implementation (https://github.com/torvalds/linux/commit/44b0c2957adc62b86fcd51adeaf8e993171b) Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: 6.6: refresh patchesMieczyslaw Nalewaj2024-04-0521-71/+71
| | | | | | Refresh kernel patches. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ramips: 6.6: remove old patchesMieczyslaw Nalewaj2024-04-0518-2979/+0
| | | | | | Remove patches for old kernel. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/ramips: Restore kernel files for v6.1Mieczyslaw Nalewaj2024-04-056-0/+1335
| | | | | | | | | | This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html for the original discussion. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/ramips: Create kernel files for v6.6 (from v6.1)Mieczyslaw Nalewaj2024-04-056-0/+0
| | | | | | | | This is an automatically generated commit. During a `git bisect` session, `git bisect --skip` is recommended. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/ramips: Restore kernel patches for v6.1Mieczyslaw Nalewaj2024-04-0551-0/+10725
| | | | | | | | | | This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html for the original discussion. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/ramips: Create kernel patches for v6.6 (from v6.1)Mieczyslaw Nalewaj2024-04-0551-0/+0
| | | | | | | | This is an automatically generated commit. During a `git bisect` session, `git bisect --skip` is recommended. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* libubox: fix PKG_MIRROR_HASH of 2024-03-29Paul Spooren2024-04-041-1/+1
| | | | | | | | | | The PKG_MIRROR_HASH was wrong (again), likely due to an old set of tools which did not contain the downgrade of xz. Ref 2070049 unetd: fix PKG_MIRROR_HASH Fix 89c594e libubox: update to Git HEAD (2024-03-29)" Signed-off-by: Paul Spooren <mail@aparcar.org>
* kirkwood: add 6.6 kernel as testing versionPawel Dembicki2024-04-041-0/+1
| | | | | | This patch introduce kernel 6.6 for kirkwood target as testing version. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kirkwood: split files into 6.1 and 6.6 versionPawel Dembicki2024-04-0419-0/+1366
| | | | | | | Upstream change location of kirkwood dts files. Split downstream files location for better upstream follow. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kirkwood: kernel: refresh 6.6 configPawel Dembicki2024-04-041-4/+13
| | | | | | Done by 'make kernel_oldconfig'. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kirkwood: refresh 6.6 patchesPawel Dembicki2024-04-0422-786/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstream merged: 002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch 003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch 004-6.4-ARM-dts-kirkwood-Add-missing-phy-mode-and-fixed-link.patch 005-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch Manually refreshed: 100-ib62x0.patch 101-iconnect.patch 102-dockstar.patch 103-iomega-ix2-200.patch 105-linksys-viper-dts.patch 106-goflexnet.patch 107-01-zyxel-nsa3x0-common-nand-partitions.patch 107-03-nsa325.patch 109-pogoplug_v4.patch 110-pogo_e02.patch 111-l-50.patch 112-sheevaplug.patch 113-readynas_duo_v2.patch 114-ctera-c-200-v1.patch 115-nsa310s.patch 116-4i-edge-200.patch 117-netgear_stora.patch 203-blackarmor-nas220.patch Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel/kirkwood: Restore kernel files for v6.1Pawel Dembicki2024-04-0425-0/+2169
| | | | | | | | | | This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html for the original discussion. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel/kirkwood: Create kernel files for v6.6 (from v6.1)Pawel Dembicki2024-04-0425-0/+0
| | | | | | | | This is an automatically generated commit. During a `git bisect` session, `git bisect --skip` is recommended. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: ltq-vmmc: fix compilation warning/errorDaniel Golle2024-04-043-2/+28
| | | | | | | | | | | | | | | | | | | | | | Fix compilation warning enum-int-mismatch which results in failure to build kmod-ltq-vmmc in case CONFIG_KERNEL_WERROR is set. .../build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_common.c:392:14: error: conflicting types for 'ifx_mps_fastbuf_init' due to enum/integer mismatch; have 'IFX_return_t(void)' [-Werror=enum-int-mismatch] 392 | IFX_return_t ifx_mps_fastbuf_init (IFX_void_t) | ^~~~~~~~~~~~~~~~~~~~ .../build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_common.c:120:13: note: previous declaration of 'ifx_mps_fastbuf_init' with type 'IFX_int32_t(void)' {aka 'int(void)'} 120 | IFX_int32_t ifx_mps_fastbuf_init (IFX_void_t); | ^~~~~~~~~~~~~~~~~~~~ .../build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_common.c:420:14: error: conflicting types for 'ifx_mps_fastbuf_close' due to enum/integer mismatch; have 'IFX_return_t(void)' [-Werror=enum-int-mismatch] 420 | IFX_return_t ifx_mps_fastbuf_close (IFX_void_t) | ^~~~~~~~~~~~~~~~~~~~~ .../build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_common.c:121:13: note: previous declaration of 'ifx_mps_fastbuf_close' with type 'IFX_int32_t(void)' {aka 'int(void)'} 121 | IFX_int32_t ifx_mps_fastbuf_close (IFX_void_t); | ^~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Refresh patches and bump PKG_RELEASE while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libxml2: add host build dependency on libiconv-fullFelix Fietkau2024-04-041-0/+1
| | | | | | Fixes build on macOS Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: slightly clean up patchesFelix Fietkau2024-04-0417-64/+25
| | | | | | | | - move build/ifdef related changes together to the 200 patch range - reduce adding/removing include statements across patches - move patches away from the 99x patch range to simplify maintenance Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: replace "argument list too long" fix with a simpler versionFelix Fietkau2024-04-042-27/+23
| | | | | | Less convoluted and more robust Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: remove workaround for broken WPA IEs in ancient devicesFelix Fietkau2024-04-041-61/+0
| | | | | | Affected devices were already quite old when this patch was added. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: adjust patches to work with git amEneas U de Queiroz2024-04-0437-854/+1131
| | | | | | | | | | | | | | | | | This adds From:, Date: and Subject: to patches, allowing one to run 'git am' to import the patches to a hostapd git repository. From: and Date: fields were taken from the OpenWrt commit where the patches were first introduced. Most of the Subject: also followed suit, except for: - 300-noscan.patch: Took the description from the LuCI web interface - 350-nl80211_del_beacon_bss.patch: Used the file name The order of the files in the patch was changed to match what git format-patch does. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* hostapd: remove unused fixEneas U de Queiroz2024-04-049-69/+49
| | | | | | | | | | | | Patch 050-build_fix.patch fixes the abscence of sha384-kdf.o from the list of needed objetct files when FILS is selected without any other option that will select the .o file. While it is a bug waiting to be fixes upstream, it is not needed for OpenWrt use case, because OWE already selects sha384-kdf.o, and FILS is selected along with OWE. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* hostapd: bump to 2024-03-09Eneas U de Queiroz2024-04-0455-518/+477
| | | | | | | | | | | | | | | | | This brings many changes, including fixes for a couple of memory leaks, and improved interoperability with 802.11r. There are also many changes related to 802.11be, which is not enabled at this time. Fixed upstream: - 022-hostapd-fix-use-of-uninitialized-stack-variables.patch - 180-driver_nl80211-fix-setting-QoS-map-on-secondary-BSSs.patch - 993-2023-10-28-ACS-Fix-typo-in-bw_40-frequency-array.patch Switch PKG_SOURCE_URL to https, since http is not currently working. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Tested-by: Ilya Katsnelson <me@0upti.me> Tested by: Andrew Sim <andrewsimz@gmail.com>
* libubox: update to Git HEAD (2024-03-29)Felix Fietkau2024-04-041-3/+3
| | | | | | | | a2fce001819e CI: add build test run 12bda4bdb197 CI: add CodeQL workflow tests eb9bcb64185a ustream: prevent recursive calls to the read callback Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq-wifi: fixup hashRobert Marko2024-04-041-1/+1
| | | | | | | It seems that somehow a wrong hash has slipped past PR CI again. Fixes: 9ef4f7f9194c ("qualcommax: ipq60xx: add yuncore fap650 support") Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: ipq60xx: add yuncore fap650 supportIsaev Ruslan2024-04-0410-4/+487
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Yuncore FAP650 device. Specifications: - Qualcomm IPQ6018+QCA8075+QCN5022+QCN5052 - 512 MB of RAM (DDR3) - 8 MB of serial flash (SPI NOR) - 128 MB of parallel flash (NAND) - 2x2 2.4 GHz WiFi (IPQ6010) - 2x2 5 GHz WiFi (IPQ6010) - 2x 2dBi 2.4G MIMO antenna - 2x 3dBi 5.8G MIMO antenna - 5x 1 Gbps Ethernet (QCA8075) - POE: 48V (IEEE 802.3af) - power: 12V (~1.5A) - 1x passthru port (rj45 - rj45) - 1x cisco rj45 console port - size: 160mm*86mm*29mm BACKUP YOUR STOCK FIRMWARE: ``` export device=fap650 mkdir -p /tmp/fw_dump_$device cd /tmp/fw_dump_$device dmesg > dmesg_$device.log dtc -I fs /sys/firmware/devicetree/base > $device.dts cat /proc/device-tree/model > model cat /proc/mtd > proc_mtd while read p; do mtd_dev=$(echo $p | cut -d: -f1) echo $mtd_dev dd if=/dev/$mtd_dev of=$mtd_dev done < proc_mtd md5sum * > md5sum.log tar -cvzf ../$device.tar.gz . export sum=$(md5sum /tmp/$device.tar.gz | cut -d' ' -f1) mv ../$device.tar.gz /tmp/${device}_${sum}.tar.gz echo fw backup saved to: /tmp/${device}_${sum}.tar.gz ``` Upload your backup via tftp to the safe place. INSTALLATION: 1. stock firmware web ui Rename factory.bin fw image file to factory.ubin. Flash this image like ordinary stock fw upgrade. 2. stock firmware telnet method Enter telnet cli (login: root, password: 476t*_f0%g09y) and upload factory.bin fw image and rename it to factory.ubin `cd /tmp && wget <your_web_server_ip>/factory.ubin` `sysupgrade factory.ubin 3. initramfs method Put imitramfs image to your TFTP server and rename it for example to fap650.initram Enable serial console and enter to the u-boot cli. Exec these commands: `tftpboot <your_tftp_server_ip>:fap650.initram` `dhcp` When downloading is finished: `bootm` After booting the device, you need to upload to the device factory.ubi fw image. ``` cd /tmp && wget <your_web_server_ip>/factory.ubi` export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1) export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1) ubiformat /dev/${rootfs} -y -f factory.ubi ubiformat /dev/${rootfs_1} -y -f factory.ubi reboot ``` 4. u-boot factory.ubi image method Put factory.ubi to your TFTP server Enter u-boot cli and exec these commands: `tftpboot <your_tftp_server_ip>:factory.ubi` `dhcp` After downloading is finished: `flash rootfs` `flash rootfs_1` `reset` STOCK FIRMWARE RECOVERY: Boot initramfs image. Upload your rootfs mtd partition to the device using scp or download it from the device using wget. Enter device ssh cli and exec: ``` cd /tmp && wget <your_web_server_ip>/rootfs_mtd` export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1) export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1) ubiformat /dev/${rootfs} -y -f /tmp/rootfs_mtd ubiformat /dev/${rootfs_1} -y -f /tmp/rootfs_mtd reboot ``` Signed-off-by: Isaev Ruslan <legale.legale@gmail.com>
* x86: 6.6: set testing kernelMieczyslaw Nalewaj2024-04-041-0/+1
| | | | | | Allow selecting 6.6 as testing kernel on x86. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* x86: 6.6: refresh kernel configMieczyslaw Nalewaj2024-04-045-114/+189
| | | | | | Refresh kernel config. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* x86: 6.6: enable System Management Mode emulation on KVMMieczyslaw Nalewaj2024-04-041-0/+1
| | | | | | | Include the CONFIG_KVM_SMM option in the kvm-x86 package to enable system management mode emulation on KVM. Co-authored-by: Stefan Hellermann <stefan@the2masters.de> Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* generic: 6.6: Removal of tools_portability.patch already included in kernel 6.6Mieczyslaw Nalewaj2024-04-041-342/+0
| | | | | | Removal of tools_portability.patch already included in kernel 6.6 Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel: 6.6: modules: netdevices: lan743x: add missing dependencyMieczyslaw Nalewaj2024-04-041-1/+1
| | | | | | | Fix error: Package kmod-lan743x is missing dependencies for the following libraries: fixed_phy.ko Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel: vfio: flag vfio_virqfd as only kernel 6.2 and earlierMathew McBride2024-04-041-2/+2
| | | | | | | | | | Kernel 6.2 folded virqfd (eventd interface for VFIO interrupts) into the base vfio module, it is no longer a tristate option. Change suggested by vincejv on GitHub: https://github.com/openwrt/openwrt/pull/14868#issuecomment-1998260124 Signed-off-by: Mathew McBride <matt@traverse.com.au>
* kernel/x86: remove legacy 5.15 kernel configElliott Mitchell2024-04-041-229/+0
| | | | | | | Missed when removing the other 5.15 kernel configurations. Fixes: b8ec063b38 ("x86: remove unused 5.15 kernel configs and patches") Signed-off-by: Elliott Mitchell <ehem+openwrt@m5p.com>
* x86: 6.6: refresh patchesMieczyslaw Nalewaj2024-04-041-8/+3
| | | | | | Refresh kernel patches. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/x86: Restore kernel patches for v6.1Mieczyslaw Nalewaj2024-04-042-0/+293
| | | | | | | | | | This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html for the original discussion. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/x86: Create kernel patches for v6.6 (from v6.1)Mieczyslaw Nalewaj2024-04-042-0/+0
| | | | | | | | This is an automatically generated commit. During a `git bisect` session, `git bisect --skip` is recommended. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/x86: Restore kernel files for v6.1Mieczyslaw Nalewaj2024-04-045-0/+2016
| | | | | | | | | | This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html for the original discussion. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* kernel/x86: Create kernel files for v6.6 (from v6.1)Mieczyslaw Nalewaj2024-04-045-0/+0
| | | | | | | | This is an automatically generated commit. During a `git bisect` session, `git bisect --skip` is recommended. Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* mbedtls: copy psa includes in InstallDevFelix Fietkau2024-04-031-1/+4
| | | | | | They are required for some of the crypto API Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/bzip2: switch to cmakeFelix Fietkau2024-04-033-423/+384
| | | | | | | Fixes portability issues on macOS. CMakeLists.txt is a stripped-down backport from bzip2 upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: 6.6: refresh patchesRobert Marko2024-04-031-2/+2
| | | | | | | Well, it seems that we have a patch that was not refreshed and CI is complaining, so refresh it. Signed-off-by: Robert Marko <robimarko@gmail.com>
* cryptodev: follow kernel.mk versioningPaul Spooren2024-04-031-1/+0
| | | | | | | | | | Instead of redefining the version schema in cryptodev, use the one automatically defined via `kernel.mk`. Specifically this changes the version from <kernel>+<package> to <kernel>.<package> and thereby making it compatible with APK. Signed-off-by: Paul Spooren <mail@aparcar.org>
* mvebu: add 6.6 testing kernelStijn Segers2024-04-031-0/+1
| | | | | | Add 6.6 testing kernel for mvebu target. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-29 18:58:12 +0000