summaryrefslogtreecommitdiffstats
path: root/target/linux/mediatek
Commit message (Collapse)AuthorAgeFilesLines
* mediatek: filogic: add driver for Richtek RT5190A regulatorDaniel Golle2023-05-245-1/+746
| | | | | | | | | The Richtek RT5190A is used on the MT7988 reference board. Backport and enable the driver on the filogic subtarget, so we can support cpufreq on the MT7988 reference board. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit a3cf3e2c489d5b6f534d1b4d6f7b462f81c9c141)
* mediatek: add driver for built-in 2.5G Ethernet PHYDaniel Golle2023-05-244-0/+303
| | | | | | | | | Add driver for the built-in 2.5G Ethernet PHY found in the MT7988 SoC. To function the PHY also needs firmware files which have not yet been published via linux-firmware. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ef2a831dabacfda6c36c79b8f963b5fdd9b2d080)
* mediatek: update pending SoC Ethernet PHY driverDaniel Golle2023-05-244-1396/+1298
| | | | | | | | Update driver for MediaTek's built-in Gigabit Ethernet PHYs which can be found in the MT7981 and MT7988 SoCs. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 987a0b2b3011a9e5ee3e4120b068fb2f113628a7)
* generic: mt7530: backport support for the MT7988 built-in switchDaniel Golle2023-05-244-0/+8
| | | | | | | | | | | | | | | | | Backport commits adding support for the MT7988 built-in switch to the mt7530 driver. This change results in the Kconfig symbol NET_DSA_MT7530 to be extended by NET_DSA_MT7530_MDIO (everything formally covered by NET_DSA_MT7530) and NET_DSA_MT7530_MMIO (a new driver for the MMIO-connected built-in switch of the MT7988 SoC). Select NET_DSA_MT7530_MDIO for all targets previously selecting NET_DSA_MT7530, with the exception of mediatek/filogic which also selects NET_DSA_MT7530_MMIO. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 958fdf36e35c814eb83faf2c39db4ca379c921b5)
* generic: add support for MediaTek NETSYS v3Daniel Golle2023-05-243-4/+6
| | | | | | | | In order to support Ethernet on the MT7988 SoC add support for NETSYS v3 as well as new paths and USXGMII SerDes to the mtk_eth_soc driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 6983a215d9d1966f95bc5b1c0045c200948b2079)
* mediatek: add mt7988 pinctrl driver supportSam Shih2023-05-244-0/+1309
| | | | | | | | This adds provisional pinctrl driver support for the MediaTek MT7988 SoC. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 9e6a7e808f2e9dd02733ccc41827940fb421091d)
* mediatek: add mt7988 clock drivers supportSam Shih2023-05-2411-0/+1668
| | | | | | | | This adds clock drivers for the MediaTek MT7988 SoC Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit b33c1858767e5109913ac2195ec2b2b8ef0e726a)
* mediatek: mt7981: setup all clocks needed for eMMCDaniel Golle2023-05-241-4/+5
| | | | | | | | Setup all necessary clocks to get MMC to work on MT7981, similar to how it is done also on MT7986. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit a9989b30d01e534288928d7ef48df3eb9fe3150b)
* mediatek: mt7981: usb enable 3.0 by defaultChukun Pan2023-05-241-1/+0
| | | | | | | | | There is no reason to limit USB to 2.0 mode by default, delete this limit. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit b2beb4c68849c804a8b9441f776a6918d433fb1e) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: enable (ARM|ARM64)_MODULE_PLTS in generic configTony Ambardar2023-05-242-2/+0
| | | | | | | | | | | | | | | | | | | | | This allows loading modules with large memory requirements, recently needed while testing on armvirt/32. Past forum discussions [1] and bug reports [2] also raised this and the ipq806x target already set it in response [3]. Given this increases kernel image size by only ~1KB, is generally useful on multi-platform kernels, and enabled by default on upstream arm32 Linux, add it to the generic config. The setting has similar utility on arm64, is a requirement for KASLR, and already enabled on most OpenWrt aarch64 targets, so pull this into the top-level generic config. [1]: https://forum.openwrt.org/t/vmap-allocation-for-size-442368-failed-use-vmalloc-size-to-increase-size/34545/7 [2]: https://github.com/openwrt/openwrt/issues/8282 [3]: f81e148eb6 ("ipq806x: update 4.19 kernel config"). Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit c2d194a34eb1a62a610f0437287db6c3eca64d5a) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: build SD card without all filesystemsDaniel Golle2023-05-241-0/+8
| | | | | | | | | Allow building SD card images without having both initramfs and squashfs present on the card, just like it has already been done for the mt7622 and filogic subtargets. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit d6fef27f2dd4a852ed7846e4aa5f06dcd8df91b6)
* mediatek: add support for Zyxel EX5601-T0 routerPietro Ameruoso2023-05-243-0/+587
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zyxel EX5601-T0 specifics -------------- The operator specific firmware running on the Zyxel branded EX5601-T0 includes U-Boot modifications affecting the OpenWrt installation. Partition Table | dev | size | erasesize | name | | ---- | -------- | --------- | ------------- | | mtd0 | 20000000 | 00040000 | "spi0.1" | | mtd1 | 00100000 | 00040000 | "BL2" | | mtd2 | 00080000 | 00040000 | "u-boot-env" | | mtd3 | 00200000 | 00040000 | "Factory" | | mtd4 | 001c0000 | 00040000 | "FIP" | | mtd5 | 00040000 | 00040000 | "zloader" | | mtd6 | 04000000 | 00040000 | "ubi" | | mtd7 | 04000000 | 00040000 | "ubi2" | | mtd8 | 15a80000 | 00040000 | "zyubi" | The router boots BL2 which than loads FIP (u-boot). U-boot has hardcoded a command to always launch Zloader "mtd read zloader 0x46000000" and than "bootm". Bootargs are deactivated. Zloader is the zyxel booloader which allow to dual-boot ubi or ubi2, by default access to zloader is blocked. Too zloader checks that the firmware contains a particolar file called zyfwinfo. Additional details regarding Zloader can be found here: https://hack-gpon.github.io/zyxel/ https://forum.openwrt.org/t/adding-openwrt-support-for-zyxel-ex5601-t0/155914 Hardware -------- SOC: MediaTek MT7986a CPU: 4 core cortex-a53 (2000MHz) RAM: 1GB DDR4 FLASH: 512MB SPI-NAND (Micron xxx) WIFI: Wifi6 Mediatek MT7976 802.11ax 5 GHz 4x4 + 2.4GHZ 4x4 ETH: MediaTek MT7531 Switch + SoC 3 x builtin 1G phy (lan1, lan2, lan3) 1 x MaxLinear GPY211B 2.5 N-Base-T phy5 (lan4) 1 x MaxLinear GPY211B 2.5Gbit xor SFP/N-Base-T phy6 (wan) USB: 1 x USB 3.2 Enhanced SuperSpeed port UART: 3V3 115200 8N1 (Pinout: GND KEY RX TX VCC) VOIP: 2 FXS ports for analog phones MAC Address Table ----------------- eth0/lan Factory 0x002a eth1/wan Factory 0x0024 wifi 2.4Ghz Factory 0x0004 wifi 5Ghz Factory 0x0004 + 1 Serial console (UART) --------------------- +-------+-------+-------+-------+-------+ | +3.3V | RX | TX | KEY | GND | +---+---+-------+-------+-------+-------+ | +--- Don't connect Installation ------------ Keep in mind that openwrt can only run on the UBI partition, the openwrt firmware is not able to understand the zloader bootargs. The procedure allows restoring the UBI partition with the Zyxel firmware and retains all the OEM functionalities. 1. Unlock Zloader (this will allow to swap manually between partitions UBI and UBI2): - Attach a usb-ttl adapter to your computer and boot the router. - While the router is booting at some point you will read the following: `Please press Enter to activate this console.` - As soon as you read that press enter, type root and than press enter again (just do it, don't care about the logs scrolling). - Most likely the router is still printing the boot log, leave it boot until it stops. - If everything went ok you should have full root access "root@EX5601-T0:/#". - Type the following command and press enter: "fw_setenv EngDebugFlag 0x1". - Reboot the router. - As soon as you read `Hit any key to stop autoboot:` press Enter. - If everything went ok you should have the following prompt: "ZHAL>". - You have successfully unlocked zloader access, this procedure must be done only once. 2. Check the current active partition: - Boot the router and repeat the steps above to gain root access. - Type the following command to check the current active image: "cat /proc/cmdline". - If `rootubi=ubi` it means that the active partition is `mtd6` - If `rootubi=ubi2` it means that the active partition is `mtd7` - As mentioned earlier we need to flash openwrt into ubi/mtd6 and never overwrite ubi2/mtd7 to be able to fully roll-back. - To activate and boot from mtd7 (ubi2) enter into ZHAL> command prompt and type the following commands: atbt 1 # unlock write atsw # swap boot partition atsr # reboot the router - After rebooting check again with "cat /proc/cmdline" that you are correctly booting from mtd7/ubi2 - If yes proceed with the installation guide. If not probably you don't have a firmware into ubi2 or you did something wrong. 3. Flashing: - Download the sysupgrade file for the router from openwrt, than we need to add the zyfwinfo file into the sysupgrade tar. Zloader only checks for the magic (which is a fixed value 'EXYZ') and the crc of the file itself (256bytes). I created a script to create a valid zyfwinfo file but you can use anything that does exactly the same: https://raw.githubusercontent.com/pameruoso/OpenWRT-Zyxel-EX5601-T0/main/gen_zyfwinfo.sh - Add the zyfwinfo file into the sysupgrade tar. - Enter via telnet or ssh into the router with admin credentials - Enter the following commands to disable the firmware and model checks "zycli fwidcheck off" and "zycli modelcheck off" - Open the router web interface and in the update firmware page select the "restore default settings option" - Select the sysupgrade file and click on upload. - The router will flash and reboot itself into openwrt from UBI 4. Restoring and going back to Zyxel firmware. - Use the ZHAL> command line to manually swap the boot parition to UBI2 with the following: atbt 1 # unlock write atsw # swap boot partition atsr # reboot the router - You will boot again the Zyxel firmware you have into UBI2 and you can flash the zyxel firmware to overwrite the UBI partition and openwrt. Working features ---------------- 3 gbit lan ports Wifi Zyxel partitioning for coexistance with Zloader and dual boot. WAN SFP port (only after exporting pins 57 and 10. gpiobase411) leds reset button serial interface usb port lan ethernet 2.5 gbit port (autosense) wan ethernet 2.5 gbit port (autosense) Not working ---------------- voip (missing drivers or proper zyxel platform software) Swapping the wan ethernet/sfp xor port ---------------- The way to swap the wan port between sfp and ethernet is the following: export the pins 57 and 10. Pin 57 is used to probe if an sfp is present. If pin 57 value is 0 it means that an sfp is present into the cage (cat /sys/class/gpio/gpio468/value). If pin 57 value is 1 it means that no sfp is inserted into the cage. In conclusion by default both 57 an 10 pins are by default 1, which means that the active port is the ethernet one. After inserting an SFP pin 57 will become 0 and you have to manually change the value of pin 10 to 0 too. This is totally scriptable of course. Leds description ------------ All the leds are working out of the box but the leds managed by the 2 maxlinear phy (phy 5 lan, phy6 wan). To activate the phy5 led (rj45 ethernet port led on the back of the router) you have to use mdio-tools. To activate the phy6 led (led on the front of the router for 2.5gbit link) you have to use mdio-tools. Example: Set lan5 led to fast blink on 2500/1000, slow blink on 10/100: mdio mdio-bus mmd 5:30 raw 0x0001 0x33FC Set wan 2.5gbit led to constant on when wan is 2.5gbit: mdio mdio-bus mmd 6:30 raw 0x0001 0x0080 Signed-off-by: Pietro Ameruoso <p.ameruoso@live.it> (cherry picked from commit 1c05388ab04c934ec240e8362321908f91381a90) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: fix append-gl-metadata when running in buildbotDaniel Golle2023-05-191-2/+5
| | | | | | | Use same logic as in append-metadata so build doesn't fail in case of missing build-key (it was previously failing on the buildbot runners). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.15 to 5.15.112John Audia2023-05-181-1/+1
| | | | | | | | | | | | | | | Manually adjusted before running quilt due to new location in tree: backport-5.15/780-v5.16-bus-mhi-pci_generic-Introduce-Sierra-EM919X-support.patch backport-5.15/781-v6.1-bus-mhi-host-always-print-detected-modem-name.patch pending-5.15/790-bus-mhi-core-add-SBL-state-callback.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* mediatek: remove left-over reference to make_gl_metadata.pyDaniel Golle2023-05-181-3/+1
| | | | | | | | When adding support for the GL.iNet GL-MT3000 a reference to the non-existent make_gl_metadata.py script was accidentally added. Remove it, flashing from vendor firmware also works fine without that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: update patch add PWM support for MT7981Daniel Golle2023-05-181-119/+29
| | | | | | Update patch with version submitted upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for the GL.iNet GL-MT3000Daniel Golle2023-05-184-3/+295
| | | | | | | | | | | | | | | | | | | | | | The MT-3000 is a pocket-sized Wi-Fi 6 router based on MediaTek MT7981. Specification: - SoC: MediaTek MT7981B - CPU: 2x 1.3 GHz Cortex-A53 - Flash: 256 MiB Macronix SPI NAND - RAM: 512 MiB Nanya DDR4 - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN) - Ethernet: - 1x 10/100/1000 Mbps built-in PHY (LAN) - 1x 10/100/1000/2500 Mbps MaxLinear GPY211 PHY (WAN) - USB 3.0 port - Buttons: 1 button, 1 switch - LEDs: 1x light-blue, 1x warm-white - Serial console: internal 4-pin header, 115200 8n1 - PWM controlled fan with tacho - Power: 5 VDC, 3 A (USB Type-C) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Cudy WR3000 v1David Bauer2023-05-186-0/+318
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- MediaTek MT7981 WiSoC 256MB DDR3 RAM 16MB SPI-NOR (XMC XM25QH128C) MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5) UART: 115200 8N1 3.3V [LEDS] VCC-GND-RX-TX [ETH] Header is located below the heatsink Case ---- Unscrew the 4 bottom screws. Remove the top of the case by inserting a small screwdriver into the ventilation holes and lift the top cover. This works best by beginning near the ETH-ports. The top is clipped on the front near the LEDs with two plastic clips. The back has a single clip in the middle. Start at one of the back edges. MAC-Addresses ------------- 80:AF:CA:00:F9:C6 LAN 80:AF:CA:00:F9:C7 WAN 80:AF:CA:00:F9:C6 W2 82:AF:CA:30:F9:C6 W5 Installation ------------ 1. Connect to the serial port as described in the "Hardware" section. 2. Power on the device. Keep pressing the "0" key to enter the U-Boot shell. 3. Download the OpenWrt initramfs image. Place it on an TFTP server connected to the Cudy LAN ports. Make sure the server is reachable at 192.168.1.2. Rename the image to "cudy3000.bin" 4. Download and boot the OpenWrt initramfs image. $ tftpboot 0x46000000 cudy3000.bin; bootm 0x46000000 5. Transfer the OpenWrt sysupgrade image to the device using scp. Install with sysupgrade. Note: Cudy does not yet provide a image for disabling their signature-protection. This has happened in the past. Make sure to check the wiki for a possible easier installation method. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: fix typoDavid Bauer2023-05-181-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: add support for wireless offloading on MT7981Daniel Golle2023-05-151-1/+1
| | | | | | Load appropriate firmware for wireless offloading on MT7981. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.15 to 5.15.111John Audia2023-05-133-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: 01. backport-5.15/424-v6.4-0001-mtd-core-provide-unique-name-for-nvmem-device-take-t.patch 02. backport-5.15/424-v6.4-0002-mtd-core-fix-nvmem-error-reporting.patch 03. generic-backport/424-v6.4-0003-mtd-core-fix-error-path-for-nvmem-provider.patch 04. generic-backport/828-v6.4-0001-of-Fix-modalias-string-generation.patch 05. bcm4908/patches-5.15/031-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch 06. bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit 07. bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgita 08. bcm4908/patches-5.15/033-v6.0-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patchgit 09. bcm4908/patches-5.15/034-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch 10. bcm4908/patches-5.15/036-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch 11. bcm4908/patches-5.15/036-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch 12. ipq806x/patches-5.15/104-v6.0-06-ARM-dts-qcom-ipq8064-reduce-pci-IO-size-to-64K.patch Manually rebased: bcm27xx/patches-5.15/950-0078-BCM2708-Add-core-Device-Tree-support.patch bcm27xx/patches-5.15/950-0547-ARM-dts-Add-Pi-Zero-2-support.patch bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgit bcm4908/patches-5.15/030-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch bcm4908/patches-5.15/032-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch bcm4908/patches-5.15/032-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch bcm4908/patches-5.15/032-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch bcm4908/patches-5.15/033-v6.0-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patchgit bcm4908/patches-5.15/033-v6.0-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patchgit bcm4908/patches-5.15/034-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch bcm4908/patches-5.15/034-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch bcm4908/patches-5.15/034-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch bcm4908/patches-5.15/034-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod 01. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=77112d23a671697f0f70695ab901f807e15d2093 02. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=fe07b3b5af01f42b291f5da0da09d047f50b33a6 03. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=273be36e420924237f6c9d43cdad96718c13dd52 04. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=fe8ab85ed4958e58e991bba0aa0a655b552b0273 05. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=6ae67829fa5e9e71f458f69db42f0e216225616a 06. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=1994284cb9226b65ca3a6744ce3320218b584f26 07. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=a46878476c5549a4fde15a31922ce80a50b23492 08. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=112ff0f2530549d50510f116474924f9c4fad590 09. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=7c253e98685e6d884d12e2618ef4d2ad90b4fbd7 10. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=8444b46e163aa9559a0af0381a1d230ec4146eb2 11. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=6d1af517817a760d7af3dee0fc4603645485495c 12. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=cc4f0e168a5630ad0491ac5328f1a89f3cf3d04e Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: fix mt7621 kernel compilationDavid Bauer2023-05-121-6/+6
| | | | | | | | | The OF LED configuration patch fails on MT7621, as the necessary headers were only included for the mediatek subtarget with an additional patch. Fixes: 242fe8634eba ("generic: add hack for MT753x LED configuration") Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: apply stock configuration for WAN-LEDDavid Bauer2023-05-111-1/+1
| | | | | | | Apply the same LED configuration used by the vendor-firmware for the GPY211 controlled WAN LED in OpenWrt. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: configure TUF-AX4200 LAN LEDsDavid Bauer2023-05-111-0/+61
| | | | | | | | | | As we can now configure the switch LED configuration, write the switch LED configuration values from the vendor firmware to the switch-IC. Previously, the switch-LEDs did not show any acitvity or link-status whatsoever. Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: enable CONFIG_ARM_CRYPTO for 32bit arm targetsLu jicong2023-05-102-0/+2
| | | | | | | Fix following error when building 32bit arm targets with kmod-crypto-sha512 ERROR: module '/home/user/openwrt/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-5.15.109/arch/arm/crypto/sha512-arm.ko' is missing. Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* generic: refresh 5.15 kernel configLu jicong2023-05-102-7/+6
| | | | | | prepare for enabling CONFIG_ARM_CRYPTO on these targets Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* kernel: improve handling of CONFIG_IO_URINGTony Ambardar2023-05-033-3/+0
| | | | | | | | | | | | | | | | | | | | | | Kernel setting CONFIG_IO_URING supports high-performance I/O for file access and servers, generally for more performant platforms, and adds ~45 KB to kernel sizes. The need for this on less "beefy" devices is questionable, as is the size cost considering many platforms have kernel size limits which require tricky repartitioning if outgrown. The size cost is also large relative to the ~180 KB bump expected between major OpenWRT kernel releases. No OpenWrt packages have hard dependencies on this; samba4 and mariadb can take advantage if available (+KERNEL_IO_URING:liburing) but otherwise build and work fine. Since CONFIG_IO_URING is already managed via the KERNEL_IO_URING setting in Config-kernel.in (default Y), remove it from those target configs which unconditionally enable it, and update the defaults to enable it conditionally only on more powerful 64-bit x86 and arm devices. It may still be manually enabled as needed for high-performance custom builds. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: fix handling of CONFIG_DYNAMIC_DEBUGTony Ambardar2023-05-032-2/+0
| | | | | | | | | | Since CONFIG_DYNAMIC_DEBUG is already managed via the KERNEL_DYNAMIC_DEBUG setting in Config-kernel.in (default N), remove or disable it in target configs which unconditionally enable it, along with the related setting CONFIG_DYNAMIC_DEBUG_CORE. This saves several KB in the kernels for ipq40xx, ipq806x, filogic, mt7622, qoriq, and sunxi. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* mediatek: no longer hard-code WAN PHY of Netgear WAX206Daniel Golle2023-04-301-2/+2
| | | | | | | | The RealTek 2.5G PHY providing the WAN port of the Netgear WAX206 has previously been hard-coded in the device tree. Now that the PHY can be probed correctly also via Clause-45 MDIO, use that instead. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: Deactivate CONFIG_COMPATHauke Mehrtens2023-04-291-4/+0
| | | | | | | | | | | | | | This deactivates the CONFIG_COMPAT kernel option. With CONFIG_COMPAT the kernel will provide syscall interfaces for arm32 binaries in addition to the interfaces needed for arm64 binaries. In OpenWrt the complete userspace is compiled for this specific architecture and support for 32 bit ARM applications is not needed. This reduces the size and the attack surface for the systems. On all other targets CONFIG_COMPAT is already deactivated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_ARM64_SW_TTBR0_PANHauke Mehrtens2023-04-292-2/+0
| | | | | | | | | | | | | This activates the CONFIG_ARM64_SW_TTBR0_PAN option for all arm64 kernels by default. The CONFIG_ARM64_SW_TTBR0_PAN option prevents the kernel form accessing user space memory directly. This makes it harder to exploit the kernel. This is activated by default and was already activate on all other arm64 targets before. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_HARDENED_USERCOPY for all targetsHauke Mehrtens2023-04-291-1/+0
| | | | | | | | | | | | | | This activates CONFIG_HARDENED_USERCOPY for the remaining targets. This adds additional checks in the copy_from_user() and copy_to_user() functions. This was not activated for ARCHS38 before because of a bug in the Linux kernel 5.4 till 5.14, which as fixed and is described here: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/15 I do not know why this was deactivated for mt7629 and rockchip. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: remove mt753x driverFelix Fietkau2023-04-2916-3970/+0
| | | | | | It is unused Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: add support for TP-Link TL-XDR4288/608xChukun Pan2023-04-228-4/+543
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: MediaTek MT7986A 4x A53 Flash: ESMT F50L1G41LB 128MB RAM: ESMT M15T4G16256A 512MB Ethernet (Max Speed): XDR4288: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan XDR6086: 1x 2.5G Wan, 1x 2.5G Lan, 1x 1G Lan XDR6088: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan WiFi: XDR4288: MT7976DAN (2.4G 2T2R, 5G 3T3R) XDR6086/XDR6088: WiFi1: MT7976GN 2.4GHz 4T4R WiFi2: MT7976AN 5GHz 4T4R Button: Reset, WPS, Turbo USB: 1 x USB 3.0 Power: DC 12V 4A Flash instructions: 1. Execute the following operation to open nc shell: https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting 2. Replace the stock bootloader to OpenWrt's: dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip 3. Connect to your PC via the Gigabit port of the router, set a static ip on the ethernet interface of your PC. (ip 192.168.1.254, gateway 192.168.1.1) 4. Download the initramfs image, and restart the router, waiting for tftp recovery to complete. 5. After openwrt boots up, perform sysupgrade. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> [Add uboot build, fit and sysupgrade support, fix RealTek PHYs] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.15 to 5.15.108John Audia2023-04-221-1/+1
| | | | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/430-v6.3-ubi-Fix-failure-attaching-when-vid_hdr-offset-equals.patch[1] backport-5.15/612-v6.3-skbuff-Fix-a-race-between-coalescing-and-releasing-S.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.108&id=85d7a7044b759d865d10395a357632af00de5867 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.108&id=906a6689bb0191ad2a44131a3377006aa098af59 Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* mediatek: filogic: remove redundant code for tuf-ax4200Chukun Pan2023-04-211-2/+1
| | | | | | Remove redundant code in 02_network. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: filogic: move mac address setting togetherChukun Pan2023-04-211-4/+6
| | | | | | Simultaneously sort in the order of letters. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: filogic: fix network config for mt7986a-rfbChukun Pan2023-04-211-1/+3
| | | | | | | Fix the network configuration according to the device tree. Fixes: 5faff99 ("mediatek: filogic: fix mt7986a ethernet devicetree entries") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: filogic: update kernel config-5.15Daniel Golle2023-04-201-1/+4
| | | | | | | Expose thermal-zone as hwmon sensor, remove thermal emulation driver and add some missing symbols. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: bpi-r3: allow up to 3W per SFP moduleDaniel Golle2023-04-201-0/+2
| | | | | | | | | According to SinoVoip up to 3A @ 3.3V are available for both SFP modules together. Raise energy limit from 1W (default) to 3W, however, be aware that using modules consuming more than 1W will require active cooling! Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport MEMREAD ioctlMichał Kępień2023-04-187-12/+12
| | | | | | | | | MEMREAD is a new ioctl for MTD character devices that was first included in Linux 6.1. It allows userspace applications to use the Linux kernel's OOB autoplacement mechanism while reading data from NAND devices. The Yafut tool needs this ioctl to do its job. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
* mediatek: sync pinctrl-mt7981 and pinctrl-mt7986 driversDaniel Golle2023-04-132-25/+150
| | | | | | | Now that new pinconf features have been backported sync pinctrl-mt7981 and pinctrl-m7986 with bleeding-edge upstream versions. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport new pinctrl featuresDaniel Golle2023-04-137-0/+1077
| | | | | | | | Backport new features for MediaTek pinctrl/pinconf drivers from upstream. This will serve as the base to improve pinconf bias/pull-up/pull-down on MT7981 and MT7986, and also prepare for upcoming support for MT7988. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: introduce KERNEL_LOADADDR to Device/Default templateDaniel Golle2023-04-055-16/+7
| | | | | | | | | | | | | | | | | | We need to reset KERNEL_LOADADDR if we use it on a per-device base. Otherwise the previous value will be kept in case a device doesn't define KERNEL_LOADADDR and relies on the default. Move initializing KERNEL_LOADADDR to target/linux/mediatek/image/Makefile, similar to how it's done also on the ramips target. This fixes image size related breakage on devices which rely on the default value of KERNEL_LOADADDR. While at it use 0x48000000 which is more common than the previous default 0x44000000 for the filogic subtarget. Fixed: e7c399bee6 ("filogic: add support for ASUS TUF-AX4200") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: make TUF-AX4200 KERNEL simply expandedDavid Bauer2023-04-041-1/+1
| | | | | | The KERNEL variable was recursively expanded, breaking other devices. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: re-add wireless driver for TUF-AX4200Andrew Sim2023-03-291-1/+1
| | | | | | | | | | | The wireless driver package was incorrectly removed from the TUF-AX4200 device-packages, resulting in images without wireless functionality. Fixes: d98c4fb8bfab ("mediatek: broaden filogic target description") Signed-off-by: Andrew Sim <andrewsimz@gmail.com> [rework commit description] Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: fix mtk_eth_soc throughput regressions on gigabit PHY portsFelix Fietkau2023-03-291-1/+1
| | | | | | Fixes issues on MT7621 and MT7623 switch ports, and PHY ports on all SoC Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: broaden filogic target descriptionDaniel Golle2023-03-272-5/+7
| | | | | | | The filogic subtarget now also supports MT7981 and will in future also support MT7988. Reflect that in the target description. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add device tree include for the MT7981 SoCDaniel Golle2023-03-271-0/+766
| | | | | | Add mt7981.dtsi so we can start adding MT7981 devices. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for SPI calibrationDaniel Golle2023-03-277-2/+590
| | | | | | | Newer MediaTek's SoCs need SPI calibration routines for SPI to work reliably. Import patches for that from MediaTek's SDK. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 00:36:16 +0000