summaryrefslogtreecommitdiffstats
path: root/target/linux/mpc85xx
Commit message (Collapse)AuthorAgeFilesLines
* mpc85xx: p1020: convert Aerohive AP330/AP350 to simpleImageChristian Lamparter2024-03-0813-52/+219
| | | | | | | | | | | | | | | | | | | | | | | | | with 6.1, the kernel no longer fitted into the 16 MiB and kicking down the can and increasing KERNEL_SIZE to 20 MiB didn't help as the device failed to boot. Using 'kernel-bin | gzip | uimage gzip' didn't work since the uboot does not have enough heap to decompress these big kernels. And finally playing around with uboot was more a hassle than converting this device to take the simpleImage-boot-route in the future. Note: The device now takes even longer on the first boot-up after the flash due to JFFS2 initializing all the remaining flash. Be prepared to wait up to 10 minutes before the green status LED stops blinking and will shine a solid green! (On the plus site: the device now has ~10 MiB of additional space for rootfs+rootfs_data). Note2: This patch includes a kernel patch refresh. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mpc85xx: add 6.1 testing kernelPawel Dembicki2024-03-081-0/+1
| | | | | | Configure 6.1 testing kernel for mpc85xx target. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: p1010: change wrapper address of simple image devicesPawel Dembicki2024-03-085-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kernel and initramfs size grows. Now uncompressed initramfs image and regular kernel image overlaps configured area: Initramfs: WRAP arch/powerpc/boot/simpleImage.br200-wp INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) WRAP arch/powerpc/boot/simpleImage.tl-wdr4900-v1 INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) WRAP arch/powerpc/boot/simpleImage.ws-ap3715i INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) Regular image: WRAP arch/powerpc/boot/simpleImage.br200-wp INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) WRAP arch/powerpc/boot/simpleImage.tl-wdr4900-v1 INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) WRAP arch/powerpc/boot/simpleImage.ws-ap3715i INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) Let's change wrapper address to safe value. Tested on: TL-WDR4900, BR200-WP Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: kernel: refresh 6.1 configPawel Dembicki2024-03-081-6/+29
| | | | | | Kernel config needs to be refreshed after copy from 5.15. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: refresh 6.1 patchesPawel Dembicki2024-03-0811-27/+27
| | | | | | | | | Most changes done by "make target/linux/refresh" Manually refreshed: 102-powerpc-add-cmdline-override.patch Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: copy patches 5.15 to 6.1Pawel Dembicki2024-03-0813-0/+662
| | | | | | Just copy of config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: copy config 5.15 to 6.1Pawel Dembicki2024-03-081-0/+269
| | | | | | Simple copy of patches. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: Get rid of 'of_flat_dt_is_compatible'Pawel Dembicki2024-03-081-4/+1
| | | | | | | | | | | This patch replaces 'of_flat_dt_is_compatible' with 'of_machine_is_compatible'. The TL-WDR4900 platform file won't compile in the 6.1 kernel. The platform files for the rest of the routers have been reworked or based on newer solutions. Let's make the TL-WDR4900 consistent with them. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: convert to new LED color/function format where possibleChristian Marangi2024-02-073-5/+13
| | | | | | | | Initial conversion to new LED color/function format and drop label format where possible. The same label is composed at runtime. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mpc85xx: drop redundant label with new LED color/function formatChristian Marangi2024-02-071-2/+0
| | | | | | | | | Drop redundant label with new LED color/function format declared. This was needed previously when the new format wasn't supported by leds.sh functions script. Now that is supported this property can be removed in favor of the new format. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mpc85xx: fix reserved-memory node nameDavid Bauer2023-12-281-1/+1
| | | | | | | | Make the node name match the actual memory address. Fixes: 57d7382cb159 ("mpc85xx: increase available RAM on Extreme Networks WS-AP3825i") Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: allow mapping of cpu1 spin-table pageDavid Bauer2023-12-041-1/+0
| | | | | | | | | | | The no-map property was incorrectly added, which kept the system-memory available on the WS-AP3825 limited to 190MB. We are allowed to map the page containing the CPU1 spin-table, we are just not allowed to write to it. Fixes: 57d7382cb159 ("mpc85xx: increase available RAM on Extreme Networks WS-AP3825i") Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: increase available RAM on Extreme Networks WS-AP3825iDavid Bauer2023-12-032-2/+57
| | | | | | | | | | | | | The system-mamory size was page-aligned prior to this commit, only enabling to use 192MB of system memory of the 256 available. This was due to the system-memory being manually shrinked to reserve the upper 1MB for the second-core bootpage in the loader as well as the OS. Fix this properly in the loader and in Linux using reserved-memory definitions. This enables the device to use 250MB of system memory. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: fix some dtc warningsRosen Penev2023-12-028-25/+23
| | | | | | Mostly missing/wrong addresses. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Revert "mpc85xx: replace user space MAC with nvmem"Christian Marangi2023-11-212-27/+5
| | | | | | | | | This reverts commit 931fcf61891f14dffccd0ad5dfdf7d84460ff9f2. The definition is wrong and require mac-base compatible. Also it's not clear if it's correct to use 0xc for mac size. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mpc85xx: replace user space MAC with nvmemRosen Penev2023-11-212-5/+27
| | | | | | Possible now that NVMEM supports ASCII. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mpc85xx: remove mac-address-incrementRosen Penev2023-11-213-33/+37
| | | | | | It's deprecated Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mpc85xx: fix dtc warningRosen Penev2023-11-212-2/+2
| | | | | | States to remove the linux prefix Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mpc85xx: add Enterasys WS-AP3715i reset buttonDavid Bauer2023-09-271-0/+11
| | | | | | | The reset button was missing from the Enterasys WS-AP3715i DTS. Add the node required for making the reset button work. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: drop WS-AP3715i label-macDavid Bauer2023-09-261-1/+0
| | | | | | | Label MAC detection does not work properly, as MAC address is assigned on preinit. Thus, remove the label-mac definition. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: correct WS-AP3715i eth LED assignmentDavid Bauer2023-09-211-1/+4
| | | | | | | Ethernet LED assignments were incorrectly swapped. Fix the assignment logic so the correct LED is illuminated for the LAN LEDs. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: backport v6.6 nvmem changesRafał Miłecki2023-08-311-0/+1
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mpc85xx: 5.15: refresh kernel patchesChristian Marangi2023-06-104-4/+4
| | | | | | Refresh kernel patches for 5.15 kernel version for mpc85xx. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: backport initial LEDs hw control supportChristian Marangi2023-06-061-0/+1
| | | | | | | | | | | | Backport initial LEDs hw control support. Currently this is limited to only rx/tx and link events for the netdev trigger but the API got accepted and the additional modes are working on and will be backported later. Refresh every patch and add the additional config flag for QCA8K new LEDs support. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mpc85xx: add support for Aerohive BR200-WPPawel Dembicki2023-05-149-5/+544
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following adds the Aerohive BR200-WP router to OpenWrt under the mpc85xx/p1010 subtarget. Hardware: - SoC: Freescale P1011 - NOR: Intel JS28F512M29EWH 64MB - Memory: 2x Nanya NT5TU64M16GG-AC 128MB (Total of 256MB) - 2.4GHz WiFi: Atheros AR9390-AL1A - Eth1: Atheros AR8035-A PoE - 2x LEDs - 1x Button - PoE PSE Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, tftp boot the initramfs image: dhcp; setenv serverip 192.168.1.3; tftpboot 0x2004000 openwrt-mpc85xx-p1010-aerohive_br200-wp-initramfs-kernel.bin; bootm 0x2004000; 3. Once booted, scp over the sysupgrade file and sysupgrade the device to flash LEDE to the NOR. Note: MAC assigns are taken from stock firmware: Name MAC addr Mode State Chan(Width) VLAN Radio Hive SSID -------- -------------- -------- ----- ----------- ---- ---------- ---------- --------- Mgt0 08ea:44XX:XXc0 - U - 1 - hive0 - Eth0 08ea:44XX:XXc0 wan U - - - - - Eth1 08ea:44XX:XXc2 access D - - - hive0 - Eth2 08ea:44XX:XXc3 access D - - - hive0 - Eth3 08ea:44XX:XXc4 access D - - - hive0 - Eth4 08ea:44XX:XXc5 access D - - - hive0 - Wifi0 08ea:44XX:XXd0 access U 1(20MHz) - radio_ng0 - - Wifi0.1 08ea:44XX:XXd4 access D 1(20MHz) - radio_ng0 hive0 - Note2: PoE PSE could be managed with `realtek-poe` package. Example port config: config port option enable '1' option id '4' option name 'lan2' option poe_plus '0' option priority '2' config port option enable '1' option id '3' option name 'lan1' option poe_plus '0' option priority '1' Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (switch@0 -> switch@10, Device's quickstart says LEDs are amber and white => add function+color properties but keep labels around, use pr_info) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* treewide: remove files for building 5.10 kernelNick Hainke2023-05-1213-874/+0
| | | | | | | | | | | All targets are bumped to 5.15. Remove the old 5.10 patches, configs and files using: find target/linux -iname '*-5.10' -exec rm -r {} \; Further, remove the 5.10 include. Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: Deactivate CONFIG_LEGACY_PTYSHauke Mehrtens2023-04-292-4/+0
| | | | | | | | | The legacy (BSD) PTY support could open security problems in a system, We do not need them in OpenWrt, deactivate this option in all targets. Debian also deactivates this option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mpc85xx: refresh patchesDavid Bauer2023-04-082-3/+3
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add support for Enterasys WS-AP3715iDavid Bauer2023-04-0812-2/+507
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: NXP P1010 (1x e500 @ 800MHz) RAM: 256M DDR3 (2x Samsung K4B1G1646G-BCH9) FLASH: 32M NOR (Spansion S25FL256S) BTN: 1x Reset WiFi: 1x Atheros AR9590 2.4 bgn 3x3 2x Atheros AR9590 5.0 an 3x3 ETH: 2x Gigabit Ethernet (Atheros AR8033 / AR8035) UART: 115200 8N1 (RJ-45 Cisco) Installation ------------ 1. Grab the OpenWrt initramfs, rename it to ap3715.bin. Place it in the root directory of a TFTP server and serve it at 192.168.1.66/24. 2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot by pressing Enter when prompted. Credentials are identical to the one in the APs interface. By default it is admin / new2day. 3. Alter the bootcmd in U-Boot: $ setenv ramboot_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; tftpboot 0x2000000 ap3715.bin; bootm" $ setenv boot_openwrt "sf probe 0; sf read 0x2000000 0x140000 0x1000000; bootm 0x2000000" $ setenv bootcmd "run boot_openwrt" $ saveenv 4. Boot the initramfs image $ run ramboot_openwrt 5. Transfer the OpenWrt sysupgrade image to the AP using SCP. Install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: don't compress kernel image for WS-AP3825iDavid Bauer2023-04-081-1/+1
| | | | | | | The kernel is already compressed with XZ by the bootwrapper, thus we gain nothing by compressing it a second time. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: reserve upper 1MB of RAM for WS-AP3825iDavid Bauer2023-04-081-1/+2
| | | | | | | | | | | | The bootpage for the second core is placed by U-Boot in the upper 128k of syste-memory. This could either be a reserved-area or deducted from the total system-memory. As only the latter is parsed by the bootwrapper, reduce the available system memory for linux in order to preserve the bootpage from being overwritten. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: backport bootwrapper patch to kernel 5.10David Bauer2023-04-081-0/+28
| | | | | | | Kernel 5.10 builds currently fail because the patch for using the simpleImage bootwrapper were not added to 5.10. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add properties normally added by U-BootDavid Bauer2023-04-081-0/+26
| | | | | | | This adds properties to PCIe as well as ethernet nodes which are normally added by the Extreme Networks U-Boot. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: fix incorrect CPU node / propertiesDavid Bauer2023-04-081-2/+8
| | | | | | | This adds properties normally filled by U-Boot. Also it fixes the node name, which is incorrectly referring to a P1010 core. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add localbus frequency for WS-AP3825iDavid Bauer2023-04-081-0/+4
| | | | | | This is normally filled by U-Boot. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add linux,stdout-path for WS-AP3825iDavid Bauer2023-04-081-0/+1
| | | | | | | This is normally filled by U-Boot. Prevents double-printing of early console messages. Also enables debug-output by the zImage wrapper. Signed-off-by: David Bauer <mail@david-bauer.net>
* Revert "mpc85xx: remove Watchguard T10 MAC override"David Bauer2023-04-031-0/+5
| | | | | | | | | | This reverts commit aa4a9058fbf4d2ca7ef3af9ebb5bbec896625e93. The assumption the bootloader fills out the MAC-address is not correct. The MAC-address has to be set from userspace based on information found in the device_id partition. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: Refresh patchesHauke Mehrtens2023-03-241-2/+2
| | | | | | | Make the patches apply cleanly again. Fixes: ed82189339b8 ("mpc85xx: use bootwrapper for ws-ap3825i") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mpc85xx: poll PHY statusDavid Bauer2023-03-202-4/+4
| | | | | | | | | | Disable interrupts for the eth-PHYs, as the interrupts are either not firing or lost within the stack. Switch to polling the PHY status in the meantime until a proper fix is implemented. Ref: https://github.com/openwrt/openwrt/issues/12192 Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: use bootwrapper for ws-ap3825iDavid Bauer2023-03-204-2/+81
| | | | | | | | | | | | | | | The boot-procedure for the Extreme WS-AP3825I is vfragile to put it mildly. It does not relocate the FDT properly. It currently exercises every step manually as well as coming with a pre-padded dtb. Use the PowerPC bootwrapper code for legacy platforms with a pre-filles DTS instead. We still need to ship a fit image to not break the fdt resize / relocate instructions on existing boards. This does not require adapting the U-Boot bootcommand. Ref: https://github.com/openwrt/openwrt/issues/12223 Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: fix incorrect kernel targetDavid Bauer2023-03-201-1/+1
| | | | | | | | | | | | | | | The wrapper-image for the WL-WDR4900 was used as a build-target for the kernel. This workd fine as long as only a single wrapper is used with the OpenWrt build-system. If additional wrappers are used, the build becomes racy in the wrapper-stage. The wrapper images actually do not represent a target. They are built based on the kernel configuration. Only copy the resulting images to avoid race-conditions as explained. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: remove Watchguard T10 MAC overrideDavid Bauer2023-03-201-5/+0
| | | | | | | | As the mac-address readout never worked, the mac-address fillout by the bootloader is sufficient. Remove the readout for the Watchguard T10 then. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: fix missing system importDavid Bauer2023-03-201-0/+1
| | | | | | | The mac-address accessor functions were not included in the sourced script. Fix this by importing the correct script path. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add support for Watchguard Firebox T10David Bauer2023-03-0711-1/+437
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Freescale P1010 RAM: 512MB FLASH: 1 MB SPI-NOR 512 MB NAND ETH: 3x Gigabite Ethernet (Atheros AR8033) SERIAL: Cisco RJ-45 (115200 8N1) RTC: Battery-Backed RTC (I2C) Installation ------------ 1. Patch U-Boot by dumping the content of the SPI-Flash using a SPI programmer. The SHA1 hash for the U-Boot password is currently unknown. A tool for patching U-Boot is available at https://github.com/blocktrron/t10-uboot-patcher/ You can also patch the unknown password yourself. The SHA1 hash is E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA 2. Interrupt the bootmenu by pressing CTRL+C. A password prompt appears. The patched password is '1234' (without quotation marks) 3. Download the OpenWrt initramfs image. Copy it to a TFTP server reachable at 10.0.1.13/24 and rename it to uImage. 4. Connect the TFTP server to ethernet port 0 of the Watchguard T10. 5. Download and boot the initramfs image by entering "tftpboot; bootm;" in U-Boot. 6. After OpenWrt booted, create a UBI volume on the old data partition. The "ubi" mtd partition should be mtd7, check this using $ cat /proc/mtd Create a UBI partition by executing $ ubiformat /dev/mtd7 -y 7. Increase the loadable kernel-size of U-Boot by executing $ fw_setenv SysAKernSize 800000 8. Transfer the OpenWrt sysupgrade image to the Watchguard T10 using scp. Install the image by using sysupgrade: $ sysupgrade -n <path-to-sysupgrade> Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You might have to change the ethernet-port. 9. OpenWrt should now boot from the internal NAND. Enjoy. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: p2020: enable CONFIG_MAX63XX_WATCHDOGJosef Schlehofer2023-03-041-0/+1
| | | | | | | | | This enables CONFIG_MAX63XX_WATCHDOG [1], which can be used on P2020 RDB. [1] https://cateee.net/lkddb/web-lkddb/MAX63XX_WATCHDOG.html Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: Add CONFIG_PPC_QUEUED_SPINLOCKS configuration optionHauke Mehrtens2023-02-231-1/+0
| | | | | | | | | | The CONFIG_PPC_QUEUED_SPINLOCKS configuration option is not defined for kernel 5.15, it is defined for kernel 5.10. This fixes the compilation of mpc85xx/p2020 with kernel 5.15. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mpc85xx: switch default kernel to 5.15Nick Hainke2023-02-221-2/+1
| | | | | | | | | | The default kernel should be switched to 5.15 in order to enable testing by a broader audience. Tested on TP-Link TL-WDR4900 v1. Acked-by: Josef Schlehofer <pepe.schlehofer@gmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* mcp85xx: Switch TP-Link TL-WDR4900 v1 to DSAPawel Dembicki2023-02-208-25/+105
| | | | | | | | | This patch introduces DSA support for TP-Link TL-WDR4900 v1 switch. Swconfig driver for QCA8327 switch is removed because this router is only one device which use Qualcom swconfig switch. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Nick Hainke <vincent@systemli.org> # TP Link WDR4900 v1 (5.15)
* mpc85xx: refresh kernel configPawel Dembicki2023-02-202-27/+15
| | | | | | It was done by "make kernel_oldconfig" command for 5.10 and 5.15. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: p2020: kernel: enable CONFIG_BLK_DEV_NVMEŠimon Bořek2023-02-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enables use of NVMe storage devices with appropriate adapter in miniPCIe slots (including for boot) in Turris 1.x routers and possibly NXP P2020RDB boards (these are the only currently supported p2020 devices according to docs[^1]). Proper detection, mountability and readability was proved to be working on Turris 1.1, OpenWrt 21.02 with similar configuration. Increases gzip compressed kernel size by approximately 37 KiB (from 3 703 KiB to 3 740 KiB). Should boot from those devices be possible the driver needs to be built in. Inclusion as a module would prevent this functionality. CONFIG_BLK_DEV_NVME=y Includes NVMe driver in the kernel.[^2] CONFIG_NVME_CORE=y Selected by CONFIG_BLK_DEV_NVME.[^3] Not necessarily needed to be enabled explicitly, but included to match the form of similar functionality implementations for mvebu, x86_64 and rockchip_armv8 targets. CONFIG_NVME_MULTIPATH disabled explicitly to prevent using more space than necessary. [^1]: https://openwrt.org/docs/techref/targets/mpc85xx [^2]: https://cateee.net/lkddb/web-lkddb/BLK_DEV_NVME.html [^3]: https://cateee.net/lkddb/web-lkddb/NVME_CORE.html Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-27 16:45:09 +0000