From 832b9cbd741cdb6cc8483b2cddfef6de000ec61d Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 24 Dec 2021 14:44:08 +0100 Subject: apm821xx: fix WD MyBook Live DUO USB-Port where to begin? the USB regulator settings were just a part of the issue. With them changed, according to the forum it still failed when a USB device was connected to the port with: dwc2 4bff80000.usbotg: dwc2_restore_global_registers: no global registers to restore dwc2 4bff80000.usbotg: dwc2_exit_partial_power_down: failed to restore registers dwc2 4bff80000.usbotg: exit partial_power_down failed dwc2 4bff80000.usbotg: HC died; cleaning up One clue was found upstream in commit cc10ce0c51b1 ("usb: dwc2: disable power_down on Amlogic devices") |Disable power_down by setting the parameter to |DWC2_POWER_DOWN_PARAM_NONE. This fixes a problem on various Amlogic |Meson SoCs where USB devices are only recognized when plugged in before |booting Linux. A hot-plugged USB device was not detected even though the |device got power (my USB thumb drive for example has an LED which lit |up). |[...] the same method proposed there worked with APM821xx's USB IP-Core. Link: https://forum.openwrt.org/t/wd-my-book-duo-usb/111926/2 Reported-by: thwe and takimata (openwrt forum) Fixes: b70d3557e05 ("apm821xx: clean up gpio-hogs") Signed-off-by: Christian Lamparter --- target/linux/apm821xx/dts/wd-mybooklive.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'target/linux/apm821xx/dts') diff --git a/target/linux/apm821xx/dts/wd-mybooklive.dts b/target/linux/apm821xx/dts/wd-mybooklive.dts index c96e7f75e9..2cc4dd8b79 100644 --- a/target/linux/apm821xx/dts/wd-mybooklive.dts +++ b/target/linux/apm821xx/dts/wd-mybooklive.dts @@ -123,9 +123,11 @@ usbpwr: usb-regulator { compatible = "regulator-fixed"; regulator-name = "Power USB Core"; - gpios = <&GPIO1 2 GPIO_ACTIVE_LOW>; + gpios = <&GPIO1 2 GPIO_ACTIVE_HIGH>; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; /* uboot sets this */ + enable-active-high; }; sata1pwr: sata1-regulator { -- cgit v1.2.3