From b0ad24f0d5bce342b432dd3a8bbaca7892c7b165 Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Sun, 12 Apr 2015 17:29:50 +0000 Subject: mvebu: migrate mamba support to the upstreamed code Signed-off-by: Imre Kaloz SVN-Revision: 45400 --- target/linux/mvebu/base-files/etc/diag.sh | 2 +- .../mvebu/base-files/etc/uci-defaults/01_leds | 2 +- .../mvebu/base-files/etc/uci-defaults/02_network | 2 +- .../mvebu/base-files/etc/uci-defaults/03_wireless | 2 +- target/linux/mvebu/base-files/lib/mvebu.sh | 4 +- .../mvebu/base-files/lib/preinit/06_set_iface_mac | 2 +- .../mvebu/base-files/lib/preinit/81_linksys_syscfg | 2 +- .../linux/mvebu/base-files/lib/upgrade/platform.sh | 4 +- .../files/arch/arm/boot/dts/armada-xp-mamba.dts | 429 --------------------- target/linux/mvebu/image/Makefile | 10 +- .../mvebu/patches-3.18/001-add_mamba_support.patch | 388 +++++++++++++++++++ .../mvebu/patches-3.18/001-build_mamba_dts.patch | 10 - .../patches-3.18/002-add_mamba_powertables.patch | 103 +++++ .../mvebu/patches-3.18/003-add_mamba_switch.patch | 19 + .../mvebu/patches-4.0/001-add_mamba_support.patch | 388 +++++++++++++++++++ .../mvebu/patches-4.0/001-build_mamba_dts.patch | 10 - .../patches-4.0/002-add_mamba_powertables.patch | 103 +++++ .../mvebu/patches-4.0/003-add_mamba_switch.patch | 19 + 18 files changed, 1035 insertions(+), 464 deletions(-) delete mode 100644 target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts create mode 100644 target/linux/mvebu/patches-3.18/001-add_mamba_support.patch delete mode 100644 target/linux/mvebu/patches-3.18/001-build_mamba_dts.patch create mode 100644 target/linux/mvebu/patches-3.18/002-add_mamba_powertables.patch create mode 100644 target/linux/mvebu/patches-3.18/003-add_mamba_switch.patch create mode 100644 target/linux/mvebu/patches-4.0/001-add_mamba_support.patch delete mode 100644 target/linux/mvebu/patches-4.0/001-build_mamba_dts.patch create mode 100644 target/linux/mvebu/patches-4.0/002-add_mamba_powertables.patch create mode 100644 target/linux/mvebu/patches-4.0/003-add_mamba_switch.patch (limited to 'target/linux') diff --git a/target/linux/mvebu/base-files/etc/diag.sh b/target/linux/mvebu/base-files/etc/diag.sh index adba975ede..6534ac3f93 100644 --- a/target/linux/mvebu/base-files/etc/diag.sh +++ b/target/linux/mvebu/base-files/etc/diag.sh @@ -6,7 +6,7 @@ get_status_led() { case $(mvebu_board_name) in - armada-xp-mamba) + armada-xp-linksys-mamba) status_led="mamba:white:power" ;; esac diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/01_leds b/target/linux/mvebu/base-files/etc/uci-defaults/01_leds index 611ee2aab3..8907a4b62c 100644 --- a/target/linux/mvebu/base-files/etc/uci-defaults/01_leds +++ b/target/linux/mvebu/base-files/etc/uci-defaults/01_leds @@ -9,7 +9,7 @@ board=$(mvebu_board_name) case "$board" in -armada-xp-mamba) +armada-xp-linksys-mamba) ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1" ucidef_set_led_usbdev "usb2" "USB2" "mamba:white:usb2" "1-1" ucidef_set_led_usbdev "usb3" "USB3" "mamba:white:usb3_1" "2-2" diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/02_network b/target/linux/mvebu/base-files/etc/uci-defaults/02_network index 6485e35059..93dc515094 100644 --- a/target/linux/mvebu/base-files/etc/uci-defaults/02_network +++ b/target/linux/mvebu/base-files/etc/uci-defaults/02_network @@ -15,7 +15,7 @@ ucidef_set_interface_loopback board=$(mvebu_board_name) case "$board" in -armada-xp-mamba) +armada-xp-linksys-mamba) ucidef_set_interfaces_lan_wan "eth0" "eth1" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5" diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless index ec188fb9e6..5eb3c901c2 100644 --- a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless +++ b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless @@ -10,7 +10,7 @@ board=$(mvebu_board_name) case "$board" in -armada-xp-mamba) +armada-xp-linksys-mamba) SKU=$(strings /dev/mtd3|sed -ne 's/^cert_region=//p') case "$SKU" in AP) diff --git a/target/linux/mvebu/base-files/lib/mvebu.sh b/target/linux/mvebu/base-files/lib/mvebu.sh index e8985b4664..3d50196bff 100755 --- a/target/linux/mvebu/base-files/lib/mvebu.sh +++ b/target/linux/mvebu/base-files/lib/mvebu.sh @@ -31,8 +31,8 @@ mvebu_board_detect() { *"Marvell Armada XP GP Board") name="armada-xp-gp" ;; - *"Linksys WRT1900AC (Mamba)") - name="armada-xp-mamba" + *"Linksys WRT1900AC") + name="armada-xp-linksys-mamba" ;; esac diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac index 2b64eda822..7b77bea27f 100644 --- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac @@ -9,7 +9,7 @@ preinit_set_mac_address() { . /lib/mvebu.sh case $(mvebu_board_name) in - armada-xp-mamba) + armada-xp-linksys-mamba) mac=$(mtd_get_mac_ascii devinfo hw_mac_addr) mac_wan=$(macaddr_setbit_la "$mac") ifconfig eth0 hw ether $mac 2>/dev/null diff --git a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg index fdd0d1e669..d59cec3ab7 100644 --- a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg +++ b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg @@ -8,7 +8,7 @@ preinit_mount_syscfg() { . /lib/mvebu.sh case $(mvebu_board_name) in - armada-xp-mamba) + armada-xp-linksys-mamba) needs_recovery=0 ubiattach -m 8 || needs_recovery=1 if [ $needs_recovery -eq 1 ] diff --git a/target/linux/mvebu/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/base-files/lib/upgrade/platform.sh index f5e44c357a..55807f5f44 100755 --- a/target/linux/mvebu/base-files/lib/upgrade/platform.sh +++ b/target/linux/mvebu/base-files/lib/upgrade/platform.sh @@ -13,7 +13,7 @@ platform_check_image() { [ "$#" -gt 1 ] && return 1 case "$board" in - armada-xp-mamba ) + armada-xp-linksys-mamba ) [ "$magic_long" != "27051956" -a "$magic_long" != "73797375" ] && { echo "Invalid image type." return 1 @@ -30,7 +30,7 @@ platform_do_upgrade() { local board=$(mvebu_board_name) case "$board" in - armada-xp-mamba) + armada-xp-linksys-mamba) platform_do_upgrade_linksys "$ARGV" ;; *) diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts deleted file mode 100644 index b6499d431e..0000000000 --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts +++ /dev/null @@ -1,429 +0,0 @@ -/* - * Device Tree file for the Linksys WRT1900AC (Mamba). - * - * Note: this board is shipped with a new generation boot loader that - * remaps internal registers at 0xf1000000. Therefore, if earlyprintk - * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be - * used. - * - * Copyright (C) 2014 Imre Kaloz - * - * Based on armada-xp-axpwifiap.dts: - * - * Copyright (C) 2013 Marvell - * - * Thomas Petazzoni - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include -#include -#include "armada-xp-mv78230.dtsi" - -/ { - model = "Linksys WRT1900AC (Mamba)"; - compatible = "linksys,mamba", "marvell,armadaxp-mv78230", - "marvell,armadaxp", "marvell,armada-370-xp"; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ - }; - - soc { - ranges = ; - - pcie-controller { - status = "okay"; - - /* Etron EJ168 USB 3.0 controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* First mini-PCIe port */ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - - mwlwifi { - marvell,5ghz = <0>; - marvell,chainmask = <4 4>; - marvell,powertable { - FCC = - <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>, - <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, - <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, - <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, - <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, - <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, - <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, - <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, - <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, - <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, - <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>; - - ETSI = - <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, - <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>; - }; - }; - }; - - /* Second mini-PCIe port */ - pcie@3,0 { - /* Port 0, Lane 3 */ - status = "okay"; - - mwlwifi { - marvell,2ghz = <0>; - marvell,chainmask = <4 4>; - marvell,powertable { - FCC = - <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, - <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, - <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, - <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, - <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, - <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, - <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, - <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, - <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, - <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, - <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, - <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, - <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, - <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, - <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, - <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, - <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, - <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, - <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, - <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, - <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, - <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, - <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, - <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>; - - ETSI = - <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, - <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>; - }; - }; - }; - }; - - internal-regs { - serial@12000 { - status = "okay"; - }; - - sata@a0000 { - nr-ports = <1>; - status = "okay"; - }; - - ethernet@70000 { - pinctrl-0 = <&ge0_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii-id"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - ethernet@74000 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii-id"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - /* USB part of the eSATA/USB 2.0 port */ - usb@50000 { - status = "okay"; - }; - - i2c@11000 { - status = "okay"; - clock-frequency = <100000>; - - tmp421@4c { - compatible = "ti,tmp421"; - reg = <0x4c>; - }; - - tlc59116@68 { - #address-cells = <1>; - #size-cells = <0>; - #gpio-cells = <2>; - compatible = "ti,tlc59116"; - reg = <0x68>; - - wan_amber@0 { - label = "mamba:amber:wan"; - reg = <0x0>; - }; - - wan_white@1 { - label = "mamba:white:wan"; - reg = <0x1>; - }; - - wlan_2g@2 { - label = "mamba:white:wlan_2g"; - reg = <0x2>; - }; - - wlan_5g@3 { - label = "mamba:white:wlan_5g"; - reg = <0x3>; - }; - - esata@4 { - label = "mamba:white:esata"; - reg = <0x4>; - }; - - usb2@5 { - label = "mamba:white:usb2"; - reg = <0x5>; - }; - - usb3_1@6 { - label = "mamba:white:usb3_1"; - reg = <0x6>; - }; - - usb3_2@7 { - label = "mamba:white:usb3_2"; - reg = <0x7>; - }; - - wps_white@8 { - label = "mamba:white:wps"; - reg = <0x8>; - }; - - wps_amber@9 { - label = "mamba:amber:wps"; - reg = <0x9>; - }; - }; - }; - - nand@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; /* 1MB */ - read-only; - }; - - partition@100000 { - label = "u_env"; - reg = <0x100000 0x40000>; /* 256KB */ - }; - - partition@140000 { - label = "s_env"; - reg = <0x140000 0x40000>; /* 256KB */ - }; - - partition@900000 { - label = "devinfo"; - reg = <0x900000 0x100000>; /* 1MB */ - read-only; - }; - - partition@a00000 { - label = "kernel1"; - reg = <0xa00000 0x2800000>; /* 3MB + rootfs1 */ - }; - - partition@d00000 { - label = "rootfs1"; - reg = <0xd00000 0x2500000>; /* 37MB */ - }; - - partition@3200000 { - label = "kernel2"; - reg = <0x3200000 0x2800000>; /* 3MB + rootfs2 */ - }; - - partition@3500000 { - label = "rootfs2"; - reg = <0x3500000 0x2500000>; /* 37MB */ - }; - - /* Last MB is for the BBT, i.e. not writable */ - partition@5a00000 { - label = "syscfg"; - reg = <0x5a00000 0x2600000>; /* 38MB */ - }; - }; - - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "everspin,mr25h256"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <40000000>; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&keys_pin>; - pinctrl-names = "default"; - - button@1 { - label = "WPS"; - linux,code = ; - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; - }; - - button@2 { - label = "Factory Reset Button"; - linux,code = ; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&power_led_pin>; - pinctrl-names = "default"; - - power { - label = "mamba:white:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - gpio_fan { - /* SUNON HA4010V4-0000-C99 */ - compatible = "gpio-fan"; - gpios = <&gpio0 24 0>; - - gpio-fan,speed-map = <0 0 - 4500 1>; - }; - - mvsw61xx { - compatible = "marvell,88e6172"; - status = "okay"; - reg = <0x10>; - - mii-bus = <&mdio>; - cpu-port-0 = <5>; - cpu-port-1 = <6>; - }; -}; - -&pinctrl { - - keys_pin: keys-pin { - marvell,pins = "mpp32", "mpp33"; - marvell,function = "gpio"; - }; - - power_led_pin: power-led-pin { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - - gpio_fan_pin: gpio-fan-pin { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; -}; diff --git a/target/linux/mvebu/image/Makefile b/target/linux/mvebu/image/Makefile index da7d2174e5..443110113c 100644 --- a/target/linux/mvebu/image/Makefile +++ b/target/linux/mvebu/image/Makefile @@ -137,7 +137,7 @@ $(eval $(call NANDProfile,XP-DB,armada-xp-db,512KiB,4096)) $(eval $(call NANDProfile,XP-GP,armada-xp-gp,512KiB,4096)) # Boards with NAND, with subpages -$(eval $(call NANDProfile,Mamba,armada-xp-mamba,128KiB,2048,512,2048)) +$(eval $(call NANDProfile,Mamba,armada-xp-linksys-mamba,128KiB,2048,512,2048)) # Boards with large NOR, where we want to use UBI $(eval $(call UBINORProfile,OpenBlocks-AX-3-4,armada-xp-openblocks-ax3-4,128KiB)) @@ -146,12 +146,12 @@ $(eval $(call UBINORProfile,OpenBlocks-AX-3-4,armada-xp-openblocks-ax3-4,128KiB) $(eval $(call NORProfile,385-RD,armada-385-rd,256KiB)) define Image/Build/Profile/Mamba/squashfs - $(call Image/Build/UbinizeImage,armada-xp-mamba,,squashfs, -p 128KiB -m 2048 -s 512 -O 2048) + $(call Image/Build/UbinizeImage,armada-xp-linksys-mamba,,squashfs, -p 128KiB -m 2048 -s 512 -O 2048) ( \ - dd if=$(KDIR)/uImage-armada-xp-mamba bs=3072k conv=sync; \ - dd if=$(KDIR)/$(IMG_PREFIX)-armada-xp-mamba-squashfs-ubinized.bin \ + dd if=$(KDIR)/uImage-armada-xp-linksys-mamba bs=3072k conv=sync; \ + dd if=$(KDIR)/$(IMG_PREFIX)-armada-xp-linksys-mamba-squashfs-ubinized.bin \ bs=2048 conv=sync; \ - ) > $(BIN_DIR)/$(IMG_PREFIX)-armada-xp-mamba-squashfs-factory.img + ) > $(BIN_DIR)/$(IMG_PREFIX)-armada-xp-linksys-mamba-squashfs-factory.img endef # The Default profile should build everything diff --git a/target/linux/mvebu/patches-3.18/001-add_mamba_support.patch b/target/linux/mvebu/patches-3.18/001-add_mamba_support.patch new file mode 100644 index 0000000000..437cc3ad3a --- /dev/null +++ b/target/linux/mvebu/patches-3.18/001-add_mamba_support.patch @@ -0,0 +1,388 @@ +From 4824140f4bd1caaf900215aabe27e4bdd1677704 Mon Sep 17 00:00:00 2001 +From: Imre Kaloz +Date: Mon, 16 Feb 2015 13:31:04 +0100 +Subject: [PATCH] ARM: mvebu: add Linksys WRT1900AC (Mamba) support + +The Linksys WRT1900AC (Mamba) is a router that has + +- 2 mini-PCIe slots with Marvell 88W8864 radios +- 1 USB 3.0 port +- 1 USB 2.0/eSATAp port +- 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) +- 128MB NAND flash +- 256MB RAM + +gregory.clement@free-electrons.com: - add ARM to the title + - fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE + - fix the unbalanced comment for the syscfg partition + +Signed-off-by: Imre Kaloz +Acked-by: Gregory CLEMENT +Signed-off-by: Gregory CLEMENT +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 348 ++++++++++++++++++++++++++ + 2 files changed, 349 insertions(+) + create mode 100644 arch/arm/boot/dts/armada-xp-linksys-mamba.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -506,6 +506,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ + armada-xp-db.dtb \ + armada-xp-gp.dtb \ + armada-xp-lenovo-ix4-300d.dtb \ ++ armada-xp-linksys-mamba.dtb \ + armada-xp-matrix.dtb \ + armada-xp-netgear-rn2120.dtb \ + armada-xp-openblocks-ax3-4.dtb +--- /dev/null ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -0,0 +1,348 @@ ++/* ++ * Device Tree file for the Linksys WRT1900AC (Mamba). ++ * ++ * Note: this board is shipped with a new generation boot loader that ++ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk ++ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be ++ * used. ++ * ++ * Copyright (C) 2014 Imre Kaloz ++ * ++ * Based on armada-xp-axpwifiap.dts: ++ * ++ * Copyright (C) 2013 Marvell ++ * ++ * Thomas Petazzoni ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without ++ * any warranty of any kind, whether express or implied. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include ++#include ++#include "armada-xp-mv78230.dtsi" ++ ++/ { ++ model = "Linksys WRT1900AC"; ++ compatible = "linksys,mamba", "marvell,armadaxp-mv78230", ++ "marvell,armadaxp", "marvell,armada-370-xp"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200"; ++ stdout-path = &uart0; ++ }; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ ++ }; ++ ++ soc { ++ ranges = ; ++ ++ pcie-controller { ++ status = "okay"; ++ ++ /* Etron EJ168 USB 3.0 controller */ ++ pcie@1,0 { ++ /* Port 0, Lane 0 */ ++ status = "okay"; ++ }; ++ ++ /* First mini-PCIe port */ ++ pcie@2,0 { ++ /* Port 0, Lane 1 */ ++ status = "okay"; ++ }; ++ ++ /* Second mini-PCIe port */ ++ pcie@3,0 { ++ /* Port 0, Lane 3 */ ++ status = "okay"; ++ }; ++ }; ++ ++ internal-regs { ++ ++ /* J10: VCC, NC, RX, NC, TX, GND */ ++ serial@12000 { ++ status = "okay"; ++ }; ++ ++ sata@a0000 { ++ nr-ports = <1>; ++ status = "okay"; ++ }; ++ ++ ethernet@70000 { ++ pinctrl-0 = <&ge0_rgmii_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ phy-mode = "rgmii-id"; ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ ethernet@74000 { ++ pinctrl-0 = <&ge1_rgmii_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ phy-mode = "rgmii-id"; ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ /* USB part of the eSATA/USB 2.0 port */ ++ usb@50000 { ++ status = "okay"; ++ }; ++ ++ i2c@11000 { ++ status = "okay"; ++ clock-frequency = <100000>; ++ ++ tmp421@4c { ++ compatible = "ti,tmp421"; ++ reg = <0x4c>; ++ }; ++ ++ tlc59116@68 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #gpio-cells = <2>; ++ compatible = "ti,tlc59116"; ++ reg = <0x68>; ++ ++ wan_amber@0 { ++ label = "mamba:amber:wan"; ++ reg = <0x0>; ++ }; ++ ++ wan_white@1 { ++ label = "mamba:white:wan"; ++ reg = <0x1>; ++ }; ++ ++ wlan_2g@2 { ++ label = "mamba:white:wlan_2g"; ++ reg = <0x2>; ++ }; ++ ++ wlan_5g@3 { ++ label = "mamba:white:wlan_5g"; ++ reg = <0x3>; ++ }; ++ ++ esata@4 { ++ label = "mamba:white:esata"; ++ reg = <0x4>; ++ }; ++ ++ usb2@5 { ++ label = "mamba:white:usb2"; ++ reg = <0x5>; ++ }; ++ ++ usb3_1@6 { ++ label = "mamba:white:usb3_1"; ++ reg = <0x6>; ++ }; ++ ++ usb3_2@7 { ++ label = "mamba:white:usb3_2"; ++ reg = <0x7>; ++ }; ++ ++ wps_white@8 { ++ label = "mamba:white:wps"; ++ reg = <0x8>; ++ }; ++ ++ wps_amber@9 { ++ label = "mamba:amber:wps"; ++ reg = <0x9>; ++ }; ++ }; ++ }; ++ ++ nand@d0000 { ++ status = "okay"; ++ num-cs = <1>; ++ marvell,nand-keep-config; ++ marvell,nand-enable-arbiter; ++ nand-on-flash-bbt; ++ nand-ecc-strength = <4>; ++ nand-ecc-step-size = <512>; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x0000000 0x100000>; /* 1MB */ ++ read-only; ++ }; ++ ++ partition@100000 { ++ label = "u_env"; ++ reg = <0x100000 0x40000>; /* 256KB */ ++ }; ++ ++ partition@140000 { ++ label = "s_env"; ++ reg = <0x140000 0x40000>; /* 256KB */ ++ }; ++ ++ partition@900000 { ++ label = "devinfo"; ++ reg = <0x900000 0x100000>; /* 1MB */ ++ read-only; ++ }; ++ ++ /* kernel1 overlaps with rootfs1 by design */ ++ partition@a00000 { ++ label = "kernel1"; ++ reg = <0xa00000 0x2800000>; /* 40MB */ ++ }; ++ ++ partition@d00000 { ++ label = "rootfs1"; ++ reg = <0xd00000 0x2500000>; /* 37MB */ ++ }; ++ ++ /* kernel2 overlaps with rootfs2 by design */ ++ partition@3200000 { ++ label = "kernel2"; ++ reg = <0x3200000 0x2800000>; /* 40MB */ ++ }; ++ ++ partition@3500000 { ++ label = "rootfs2"; ++ reg = <0x3500000 0x2500000>; /* 37MB */ ++ }; ++ ++ /* ++ * 38MB, last MB is for the BBT, not writable ++ */ ++ partition@5a00000 { ++ label = "syscfg"; ++ reg = <0x5a00000 0x2600000>; ++ }; ++ ++ /* ++ * Unused area between "s_env" and "devinfo". ++ * Moved here because otherwise the renumbered ++ * partitions would break the bootloader ++ * supplied bootargs ++ */ ++ partition@180000 { ++ label = "unused_area"; ++ reg = <0x180000 0x780000>; /* 7.5MB */ ++ }; ++ }; ++ ++ spi0: spi@10600 { ++ status = "okay"; ++ ++ spi-flash@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "everspin,mr25h256"; ++ reg = <0>; /* Chip select 0 */ ++ spi-max-frequency = <40000000>; ++ }; ++ }; ++ }; ++ }; ++ ++ gpio_keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-0 = <&keys_pin>; ++ pinctrl-names = "default"; ++ ++ button@1 { ++ label = "WPS"; ++ linux,code = ; ++ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ button@2 { ++ label = "Factory Reset Button"; ++ linux,code = ; ++ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ pinctrl-0 = <&power_led_pin>; ++ pinctrl-names = "default"; ++ ++ power { ++ label = "mamba:white:power"; ++ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; ++ }; ++ }; ++ ++ gpio_fan { ++ /* SUNON HA4010V4-0000-C99 */ ++ compatible = "gpio-fan"; ++ gpios = <&gpio0 24 0>; ++ ++ gpio-fan,speed-map = <0 0 ++ 4500 1>; ++ }; ++}; ++ ++&pinctrl { ++ ++ keys_pin: keys-pin { ++ marvell,pins = "mpp32", "mpp33"; ++ marvell,function = "gpio"; ++ }; ++ ++ power_led_pin: power-led-pin { ++ marvell,pins = "mpp40"; ++ marvell,function = "gpio"; ++ }; ++ ++ gpio_fan_pin: gpio-fan-pin { ++ marvell,pins = "mpp24"; ++ marvell,function = "gpio"; ++ }; ++}; diff --git a/target/linux/mvebu/patches-3.18/001-build_mamba_dts.patch b/target/linux/mvebu/patches-3.18/001-build_mamba_dts.patch deleted file mode 100644 index cb27ccd621..0000000000 --- a/target/linux/mvebu/patches-3.18/001-build_mamba_dts.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -506,6 +506,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ - armada-xp-db.dtb \ - armada-xp-gp.dtb \ - armada-xp-lenovo-ix4-300d.dtb \ -+ armada-xp-mamba.dtb \ - armada-xp-matrix.dtb \ - armada-xp-netgear-rn2120.dtb \ - armada-xp-openblocks-ax3-4.dtb diff --git a/target/linux/mvebu/patches-3.18/002-add_mamba_powertables.patch b/target/linux/mvebu/patches-3.18/002-add_mamba_powertables.patch new file mode 100644 index 0000000000..6b51e48a84 --- /dev/null +++ b/target/linux/mvebu/patches-3.18/002-add_mamba_powertables.patch @@ -0,0 +1,103 @@ +--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -84,12 +84,100 @@ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; ++ ++ mwlwifi { ++ marvell,5ghz = <0>; ++ marvell,chainmask = <4 4>; ++ marvell,powertable { ++ FCC = ++ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>; ++ ++ ETSI = ++ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>; ++ }; ++ }; + }; + + /* Second mini-PCIe port */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; ++ ++ mwlwifi { ++ marvell,2ghz = <0>; ++ marvell,chainmask = <4 4>; ++ marvell,powertable { ++ FCC = ++ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>; ++ ++ ETSI = ++ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>; ++ }; ++ }; + }; + }; + diff --git a/target/linux/mvebu/patches-3.18/003-add_mamba_switch.patch b/target/linux/mvebu/patches-3.18/003-add_mamba_switch.patch new file mode 100644 index 0000000000..e43d164aaf --- /dev/null +++ b/target/linux/mvebu/patches-3.18/003-add_mamba_switch.patch @@ -0,0 +1,19 @@ +--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -415,6 +415,16 @@ + gpio-fan,speed-map = <0 0 + 4500 1>; + }; ++ ++ mvsw61xx { ++ compatible = "marvell,88e6172"; ++ status = "okay"; ++ reg = <0x10>; ++ ++ mii-bus = <&mdio>; ++ cpu-port-0 = <5>; ++ cpu-port-1 = <6>; ++ }; + }; + + &pinctrl { diff --git a/target/linux/mvebu/patches-4.0/001-add_mamba_support.patch b/target/linux/mvebu/patches-4.0/001-add_mamba_support.patch new file mode 100644 index 0000000000..305479acfb --- /dev/null +++ b/target/linux/mvebu/patches-4.0/001-add_mamba_support.patch @@ -0,0 +1,388 @@ +From 4824140f4bd1caaf900215aabe27e4bdd1677704 Mon Sep 17 00:00:00 2001 +From: Imre Kaloz +Date: Mon, 16 Feb 2015 13:31:04 +0100 +Subject: [PATCH] ARM: mvebu: add Linksys WRT1900AC (Mamba) support + +The Linksys WRT1900AC (Mamba) is a router that has + +- 2 mini-PCIe slots with Marvell 88W8864 radios +- 1 USB 3.0 port +- 1 USB 2.0/eSATAp port +- 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) +- 128MB NAND flash +- 256MB RAM + +gregory.clement@free-electrons.com: - add ARM to the title + - fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE + - fix the unbalanced comment for the syscfg partition + +Signed-off-by: Imre Kaloz +Acked-by: Gregory CLEMENT +Signed-off-by: Gregory CLEMENT +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 348 ++++++++++++++++++++++++++ + 2 files changed, 349 insertions(+) + create mode 100644 arch/arm/boot/dts/armada-xp-linksys-mamba.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -629,6 +629,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ + armada-xp-db.dtb \ + armada-xp-gp.dtb \ + armada-xp-lenovo-ix4-300d.dtb \ ++ armada-xp-linksys-mamba.dtb \ + armada-xp-matrix.dtb \ + armada-xp-netgear-rn2120.dtb \ + armada-xp-openblocks-ax3-4.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -0,0 +1,348 @@ ++/* ++ * Device Tree file for the Linksys WRT1900AC (Mamba). ++ * ++ * Note: this board is shipped with a new generation boot loader that ++ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk ++ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be ++ * used. ++ * ++ * Copyright (C) 2014 Imre Kaloz ++ * ++ * Based on armada-xp-axpwifiap.dts: ++ * ++ * Copyright (C) 2013 Marvell ++ * ++ * Thomas Petazzoni ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without ++ * any warranty of any kind, whether express or implied. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include ++#include ++#include "armada-xp-mv78230.dtsi" ++ ++/ { ++ model = "Linksys WRT1900AC"; ++ compatible = "linksys,mamba", "marvell,armadaxp-mv78230", ++ "marvell,armadaxp", "marvell,armada-370-xp"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200"; ++ stdout-path = &uart0; ++ }; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ ++ }; ++ ++ soc { ++ ranges = ; ++ ++ pcie-controller { ++ status = "okay"; ++ ++ /* Etron EJ168 USB 3.0 controller */ ++ pcie@1,0 { ++ /* Port 0, Lane 0 */ ++ status = "okay"; ++ }; ++ ++ /* First mini-PCIe port */ ++ pcie@2,0 { ++ /* Port 0, Lane 1 */ ++ status = "okay"; ++ }; ++ ++ /* Second mini-PCIe port */ ++ pcie@3,0 { ++ /* Port 0, Lane 3 */ ++ status = "okay"; ++ }; ++ }; ++ ++ internal-regs { ++ ++ /* J10: VCC, NC, RX, NC, TX, GND */ ++ serial@12000 { ++ status = "okay"; ++ }; ++ ++ sata@a0000 { ++ nr-ports = <1>; ++ status = "okay"; ++ }; ++ ++ ethernet@70000 { ++ pinctrl-0 = <&ge0_rgmii_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ phy-mode = "rgmii-id"; ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ ethernet@74000 { ++ pinctrl-0 = <&ge1_rgmii_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ phy-mode = "rgmii-id"; ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ /* USB part of the eSATA/USB 2.0 port */ ++ usb@50000 { ++ status = "okay"; ++ }; ++ ++ i2c@11000 { ++ status = "okay"; ++ clock-frequency = <100000>; ++ ++ tmp421@4c { ++ compatible = "ti,tmp421"; ++ reg = <0x4c>; ++ }; ++ ++ tlc59116@68 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #gpio-cells = <2>; ++ compatible = "ti,tlc59116"; ++ reg = <0x68>; ++ ++ wan_amber@0 { ++ label = "mamba:amber:wan"; ++ reg = <0x0>; ++ }; ++ ++ wan_white@1 { ++ label = "mamba:white:wan"; ++ reg = <0x1>; ++ }; ++ ++ wlan_2g@2 { ++ label = "mamba:white:wlan_2g"; ++ reg = <0x2>; ++ }; ++ ++ wlan_5g@3 { ++ label = "mamba:white:wlan_5g"; ++ reg = <0x3>; ++ }; ++ ++ esata@4 { ++ label = "mamba:white:esata"; ++ reg = <0x4>; ++ }; ++ ++ usb2@5 { ++ label = "mamba:white:usb2"; ++ reg = <0x5>; ++ }; ++ ++ usb3_1@6 { ++ label = "mamba:white:usb3_1"; ++ reg = <0x6>; ++ }; ++ ++ usb3_2@7 { ++ label = "mamba:white:usb3_2"; ++ reg = <0x7>; ++ }; ++ ++ wps_white@8 { ++ label = "mamba:white:wps"; ++ reg = <0x8>; ++ }; ++ ++ wps_amber@9 { ++ label = "mamba:amber:wps"; ++ reg = <0x9>; ++ }; ++ }; ++ }; ++ ++ nand@d0000 { ++ status = "okay"; ++ num-cs = <1>; ++ marvell,nand-keep-config; ++ marvell,nand-enable-arbiter; ++ nand-on-flash-bbt; ++ nand-ecc-strength = <4>; ++ nand-ecc-step-size = <512>; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x0000000 0x100000>; /* 1MB */ ++ read-only; ++ }; ++ ++ partition@100000 { ++ label = "u_env"; ++ reg = <0x100000 0x40000>; /* 256KB */ ++ }; ++ ++ partition@140000 { ++ label = "s_env"; ++ reg = <0x140000 0x40000>; /* 256KB */ ++ }; ++ ++ partition@900000 { ++ label = "devinfo"; ++ reg = <0x900000 0x100000>; /* 1MB */ ++ read-only; ++ }; ++ ++ /* kernel1 overlaps with rootfs1 by design */ ++ partition@a00000 { ++ label = "kernel1"; ++ reg = <0xa00000 0x2800000>; /* 40MB */ ++ }; ++ ++ partition@d00000 { ++ label = "rootfs1"; ++ reg = <0xd00000 0x2500000>; /* 37MB */ ++ }; ++ ++ /* kernel2 overlaps with rootfs2 by design */ ++ partition@3200000 { ++ label = "kernel2"; ++ reg = <0x3200000 0x2800000>; /* 40MB */ ++ }; ++ ++ partition@3500000 { ++ label = "rootfs2"; ++ reg = <0x3500000 0x2500000>; /* 37MB */ ++ }; ++ ++ /* ++ * 38MB, last MB is for the BBT, not writable ++ */ ++ partition@5a00000 { ++ label = "syscfg"; ++ reg = <0x5a00000 0x2600000>; ++ }; ++ ++ /* ++ * Unused area between "s_env" and "devinfo". ++ * Moved here because otherwise the renumbered ++ * partitions would break the bootloader ++ * supplied bootargs ++ */ ++ partition@180000 { ++ label = "unused_area"; ++ reg = <0x180000 0x780000>; /* 7.5MB */ ++ }; ++ }; ++ ++ spi0: spi@10600 { ++ status = "okay"; ++ ++ spi-flash@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "everspin,mr25h256"; ++ reg = <0>; /* Chip select 0 */ ++ spi-max-frequency = <40000000>; ++ }; ++ }; ++ }; ++ }; ++ ++ gpio_keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-0 = <&keys_pin>; ++ pinctrl-names = "default"; ++ ++ button@1 { ++ label = "WPS"; ++ linux,code = ; ++ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ button@2 { ++ label = "Factory Reset Button"; ++ linux,code = ; ++ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ pinctrl-0 = <&power_led_pin>; ++ pinctrl-names = "default"; ++ ++ power { ++ label = "mamba:white:power"; ++ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; ++ }; ++ }; ++ ++ gpio_fan { ++ /* SUNON HA4010V4-0000-C99 */ ++ compatible = "gpio-fan"; ++ gpios = <&gpio0 24 0>; ++ ++ gpio-fan,speed-map = <0 0 ++ 4500 1>; ++ }; ++}; ++ ++&pinctrl { ++ ++ keys_pin: keys-pin { ++ marvell,pins = "mpp32", "mpp33"; ++ marvell,function = "gpio"; ++ }; ++ ++ power_led_pin: power-led-pin { ++ marvell,pins = "mpp40"; ++ marvell,function = "gpio"; ++ }; ++ ++ gpio_fan_pin: gpio-fan-pin { ++ marvell,pins = "mpp24"; ++ marvell,function = "gpio"; ++ }; ++}; diff --git a/target/linux/mvebu/patches-4.0/001-build_mamba_dts.patch b/target/linux/mvebu/patches-4.0/001-build_mamba_dts.patch deleted file mode 100644 index 5993d3c2b3..0000000000 --- a/target/linux/mvebu/patches-4.0/001-build_mamba_dts.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -629,6 +629,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ - armada-xp-db.dtb \ - armada-xp-gp.dtb \ - armada-xp-lenovo-ix4-300d.dtb \ -+ armada-xp-mamba.dtb \ - armada-xp-matrix.dtb \ - armada-xp-netgear-rn2120.dtb \ - armada-xp-openblocks-ax3-4.dtb \ diff --git a/target/linux/mvebu/patches-4.0/002-add_mamba_powertables.patch b/target/linux/mvebu/patches-4.0/002-add_mamba_powertables.patch new file mode 100644 index 0000000000..6b51e48a84 --- /dev/null +++ b/target/linux/mvebu/patches-4.0/002-add_mamba_powertables.patch @@ -0,0 +1,103 @@ +--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -84,12 +84,100 @@ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; ++ ++ mwlwifi { ++ marvell,5ghz = <0>; ++ marvell,chainmask = <4 4>; ++ marvell,powertable { ++ FCC = ++ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>; ++ ++ ETSI = ++ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>; ++ }; ++ }; + }; + + /* Second mini-PCIe port */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; ++ ++ mwlwifi { ++ marvell,2ghz = <0>; ++ marvell,chainmask = <4 4>; ++ marvell,powertable { ++ FCC = ++ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>; ++ ++ ETSI = ++ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>; ++ }; ++ }; + }; + }; + diff --git a/target/linux/mvebu/patches-4.0/003-add_mamba_switch.patch b/target/linux/mvebu/patches-4.0/003-add_mamba_switch.patch new file mode 100644 index 0000000000..e43d164aaf --- /dev/null +++ b/target/linux/mvebu/patches-4.0/003-add_mamba_switch.patch @@ -0,0 +1,19 @@ +--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -415,6 +415,16 @@ + gpio-fan,speed-map = <0 0 + 4500 1>; + }; ++ ++ mvsw61xx { ++ compatible = "marvell,88e6172"; ++ status = "okay"; ++ reg = <0x10>; ++ ++ mii-bus = <&mdio>; ++ cpu-port-0 = <5>; ++ cpu-port-1 = <6>; ++ }; + }; + + &pinctrl { -- cgit v1.2.3