// SPDX-License-Identifier: BSD-3-Clause
/*
 *  Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
 *  Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
 *  All rights reserved.
 */

#include "qcom-ipq8064-v1.0.dtsi"

#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/qcom,tcsr.h>

/ {
	compatible = "compex,wpq864", "qcom,ipq8064";
	model = "Compex WPQ864";

	aliases {
		mdio-gpio0 = &mdio0;
		ethernet0 = &gmac1;
		ethernet1 = &gmac0;

		led-boot = &led_pass;
		led-failsafe = &led_fail;
		led-running = &led_pass;
		led-upgrade = &led_pass;
	};

	leds {
		compatible = "gpio-leds";

		pinctrl-0 = <&led_pins>;
		pinctrl-names = "default";

		rss4 {
			label = "green:rss4";
			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
		};

		rss3 {
			label = "green:rss3";
			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
			default-state = "keep";
		};

		rss2 {
			label = "orange:rss2";
			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
		};

		rss1 {
			label = "red:rss1";
			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
		};

		led_pass: pass {
			label = "green:pass";
			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
		};

		led_fail: fail {
			label = "green:fail";
			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
		};

		usb {
			function = LED_FUNCTION_USB;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
		};

		usb-pcie {
			label = "green:usb-pcie";
			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
		};
	};

	keys {
		compatible = "gpio-keys";

		pinctrl-0 = <&button_pins>;
		pinctrl-names = "default";

		reset {
			label = "reset";
			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
			debounce-interval = <60>;
			wakeup-source;
		};
	};

	beeper {
		compatible = "gpio-beeper";

		pinctrl-0 = <&beeper_pins>;
		pinctrl-names = "default";

		gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
	};
};

&rpm {
	pinctrl-0 = <&rpm_pins>;
	pinctrl-names = "default";
};

&nand {
	status = "okay";

	pinctrl-0 = <&nand_pins>;
	pinctrl-names = "default";

	mt29f2g08abbeah4@0 {
		compatible = "qcom,nandcs";

		reg = <0>;

		nand-ecc-strength = <4>;
		nand-bus-width = <8>;
		nand-ecc-step-size = <512>;

		nand-is-boot-medium;
		qcom,boot-partitions = <0x0 0x1180000 0x5340000 0x10c0000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "0:SBL1";
				reg = <0x0000000 0x0040000>;
				read-only;
			};

			partition@40000 {
				label = "0:MIBIB";
				reg = <0x0040000 0x0140000>;
				read-only;
			};

			partition@180000 {
				label = "0:SBL2";
				reg = <0x0180000 0x0140000>;
				read-only;
			};

			partition@2c0000 {
				label = "0:SBL3";
				reg = <0x02c0000 0x0280000>;
				read-only;
			};

			partition@540000 {
				label = "0:DDRCONFIG";
				reg = <0x0540000 0x0120000>;
				read-only;
			};

			partition@660000 {
				label = "0:SSD";
				reg = <0x0660000 0x0120000>;
				read-only;
			};

			partition@780000 {
				label = "0:TZ";
				reg = <0x0780000 0x0280000>;
				read-only;
			};

			partition@a00000 {
				label = "0:RPM";
				reg = <0x0a00000 0x0280000>;
				read-only;
			};

			partition@c80000 {
				label = "0:APPSBL";
				reg = <0x0c80000 0x0500000>;
				read-only;
			};

			partition@1180000 {
				label = "0:APPSBLENV";
				reg = <0x1180000 0x0080000>;
			};

			partition@1200000 {
				label = "0:ART";
				reg = <0x1200000 0x0140000>;
			};

			partition@1340000 {
				label = "ubi";
				reg = <0x1340000 0x4000000>;
			};

			partition@5340000 {
				label = "0:BOOTCONFIG";
				reg = <0x5340000 0x0060000>;
			};

			partition@53a0000 {
				label = "0:SBL2_1";
				reg = <0x53a0000 0x0140000>;
				read-only;
			};

			partition@54e0000 {
				label = "0:SBL3_1";
				reg = <0x54e0000 0x0280000>;
				read-only;
			};

			partition@5760000 {
				label = "0:DDRCONFIG_1";
				reg = <0x5760000 0x0120000>;
				read-only;
			};

			partition@5880000 {
				label = "0:SSD_1";
				reg = <0x5880000 0x0120000>;
				read-only;
			};

			partition@59a0000 {
				label = "0:TZ_1";
				reg = <0x59a0000 0x0280000>;
				read-only;
			};

			partition@5c20000 {
				label = "0:RPM_1";
				reg = <0x5c20000 0x0280000>;
				read-only;
			};

			partition@5ea0000 {
				label = "0:BOOTCONFIG1";
				reg = <0x5ea0000 0x0060000>;
			};

			partition@5f00000 {
				label = "0:APPSBL_1";
				reg = <0x5f00000 0x0500000>;
				read-only;
			};

			partition@6400000 {
				label = "ubi_1";
				reg = <0x6400000 0x4000000>;
			};

			partition@a400000 {
				label = "unused";
				reg = <0xa400000 0x5c00000>;
			};
		};
	};
};

&adm_dma {
	status = "okay";
};

&mdio0 {
	status = "okay";

	pinctrl-0 = <&mdio0_pins>;
	pinctrl-names = "default";

	switch@10 {
		compatible = "qca,qca8337";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x10>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				label = "cpu";
				ethernet = <&gmac1>;
				phy-mode = "rgmii";
				tx-internal-delay-ps = <1000>;
				rx-internal-delay-ps = <1000>;

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

			port@1 {
				reg = <1>;
				label = "lan1";
				phy-mode = "internal";
				phy-handle = <&phy_port1>;
			};

			port@2 {
				reg = <2>;
				label = "lan2";
				phy-mode = "internal";
				phy-handle = <&phy_port2>;
			};

			port@3 {
				reg = <3>;
				label = "lan3";
				phy-mode = "internal";
				phy-handle = <&phy_port3>;
			};

			port@4 {
				reg = <4>;
				label = "lan4";
				phy-mode = "internal";
				phy-handle = <&phy_port4>;
			};

			port@5 {
				reg = <5>;
				label = "wan";
				phy-mode = "internal";
				phy-handle = <&phy_port5>;
			};

			port@6 {
				reg = <6>;
				label = "cpu";
				ethernet = <&gmac2>;
				phy-mode = "sgmii";
				qca,sgmii-enable-pll;

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};
		};

		mdio {
			#address-cells = <1>;
			#size-cells = <0>;

			phy_port1: phy@0 {
				reg = <0>;
			};

			phy_port2: phy@1 {
				reg = <1>;
			};

			phy_port3: phy@2 {
				reg = <2>;
			};

			phy_port4: phy@3 {
				reg = <3>;
			};

			phy_port5: phy@4 {
				reg = <4>;
			};
		};
	};
};

&gmac1 {
	status = "okay";

	pinctrl-0 = <&rgmii2_pins>;
	pinctrl-names = "default";

	phy-mode = "rgmii";
	qcom,id = <1>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&gmac2 {
	status = "okay";

	phy-mode = "sgmii";
	qcom,id = <2>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&gsbi4_serial {
	pinctrl-0 = <&uart0_pins>;
	pinctrl-names = "default";
};

&flash {
	compatible = "jedec,spi-nor";
};

&sata_phy {
	status = "disabled";
};

&sata {
	status = "disabled";
};

&hs_phy_0 {
	status = "okay";
};

&ss_phy_0 {
	status = "okay";

	rx_eq = <2>;
	tx_deamp_3_5db = <32>;
	mpll = <160>;
};

&usb3_0 {
	status = "okay";
};

&hs_phy_1 {
	status = "okay";
};

&ss_phy_1 {
	status = "okay";

	rx_eq = <2>;
	tx_deamp_3_5db = <32>;
	mpll = <160>;
};

&usb3_1 {
	status = "okay";
};

&pcie0 {
	status = "okay";

	/delete-property/ pinctrl-0;
	/delete-property/ pinctrl-names;
	/delete-property/ perst-gpios;
};

&pcie1 {
	status = "okay";
};

&pcie2 {
	status = "okay";

	/delete-property/ pinctrl-0;
	/delete-property/ pinctrl-names;
	/delete-property/ perst-gpios;
};

&qcom_pinmux {
	pinctrl-names = "default";
	pinctrl-0 = <&state_default>;

	state_default: pinctrl0 {
		pcie0_pcie2_perst {
			pins = "gpio3";
			function = "gpio";
			drive-strength = <2>;
			bias-disable;
			output-high;
		};
	};

	led_pins: led_pins {
		mux {
			pins = "gpio7", "gpio8", "gpio9", "gpio22",
			       "gpio23", "gpio24", "gpio25", "gpio53";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	button_pins: button_pins {
		mux {
			pins = "gpio54";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	beeper_pins: beeper_pins {
		mux {
			pins = "gpio55";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	rpm_pins: rpm_pins {
		mux {
			pins = "gpio12", "gpio13";
			function = "gsbi4";
			drive-strength = <10>;
			bias-disable;
		};
	};

	uart0_pins: uart0_pins {
		mux {
			pins = "gpio10", "gpio11";
			function = "gsbi4";
			drive-strength = <10>;
			bias-disable;
		};
	};

	spi_pins: spi_pins {
		mux {
			pins = "gpio18", "gpio19";
			function = "gsbi5";
			drive-strength = <10>;
			bias-pull-down;
		};

		clk {
			pins = "gpio21";
			function = "gsbi5";
			drive-strength = <12>;
			bias-pull-down;
		};

		cs {
			pins = "gpio20";
			function = "gpio";
			drive-strength = <10>;
			bias-pull-up;
		};
	};
};

&tcsr {
	qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
};