From da76cb63d04dc22ed32123b8c1d084c006d67bfb Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 7 Nov 2022 14:29:01 +0100 Subject: [PATCH] clk: qcom: ipq8074: add missing networking resets Downstream QCA 5.4 kernel defines networking resets which are not present in the mainline kernel but are required for the networking drivers. So, port the downstream resets and avoid using magic values for mask, construct mask for resets which require multiple bits to be set/cleared. Signed-off-by: Robert Marko Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20221107132901.489240-3-robimarko@gmail.com --- drivers/clk/qcom/gcc-ipq8074.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) --- a/drivers/clk/qcom/gcc-ipq8074.c +++ b/drivers/clk/qcom/gcc-ipq8074.c @@ -4665,6 +4665,20 @@ static const struct qcom_reset_map gcc_i [GCC_PCIE1_AXI_SLAVE_ARES] = { 0x76040, 4 }, [GCC_PCIE1_AHB_ARES] = { 0x76040, 5 }, [GCC_PCIE1_AXI_MASTER_STICKY_ARES] = { 0x76040, 6 }, + [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = GENMASK(19, 16) }, + [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = GENMASK(13, 4) | BIT(1) }, + [GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 }, + [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = GENMASK(5, 4) | BIT(1) }, + [GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 }, + [GCC_UNIPHY2_SOFT_RESET] = { .reg = 0x56204, .bitmask = GENMASK(5, 4) | BIT(1) }, + [GCC_UNIPHY2_XPCS_RESET] = { 0x56204, 2 }, + [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = GENMASK(21, 20) }, + [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = BIT(24) | GENMASK(1, 0) }, + [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = BIT(25) | GENMASK(3, 2) }, + [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = BIT(26) | GENMASK(5, 4) }, + [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = BIT(27) | GENMASK(9, 8) }, + [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = BIT(28) | GENMASK(11, 10) }, + [GCC_NSSPORT6_RESET] = { .reg = 0x68014, .bitmask = BIT(29) | GENMASK(13, 12) }, }; static struct gdsc *gcc_ipq8074_gdscs[] = {