#include "mt7621.dtsi" #include #include / { compatible = "d-team,newifi-d2", "mediatek,mt7621-soc"; model = "Newifi-D2"; aliases { led-boot = &led_power_blue; led-failsafe = &led_power_blue; led-running = &led_power_blue; led-upgrade = &led_power_blue; label-mac-device = &gmac0; }; chosen { bootargs = "console=ttyS0,115200"; }; leds { compatible = "gpio-leds"; power-amber { label = "amber:power"; gpios = <&gpio 6 GPIO_ACTIVE_LOW>; }; led_power_blue: power-blue { label = "blue:power"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; internet-amber { label = "amber:internet"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; internet-blue { label = "blue:internet"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; wlan2g { label = "blue:wlan2g"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; wlan5g { label = "blue:wlan5g"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; usb { label = "blue:usb"; gpios = <&gpio 10 GPIO_ACTIVE_LOW>; trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>; linux,default-trigger = "usbport"; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; linux,code = ; }; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; power_usb3 { gpio-export,name = "power_usb3"; gpio-export,output = <1>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <45000000>; broken-flash-reset; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x1fb0000>; }; }; }; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; }; &pcie1 { mt76@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0000>; }; }; &gmac0 { mtd-mac-address = <&factory 0xe000>; }; &switch0 { ports { port@0 { status = "okay"; label = "lan4"; }; port@1 { status = "okay"; label = "lan3"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan1"; }; port@4 { status = "okay"; label = "wan"; mtd-mac-address = <&factory 0xe006>; }; }; }; &state_default { gpio { groups = "i2c", "jtag", "uart2", "uart3"; function = "gpio"; }; };