// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "hak5,wifi-pineapple-mk7", "mediatek,mt7628an-soc";
	model = "Hak5 WiFi Pineapple Mark 7";

	aliases {
		led-boot = &led_system_blue;
		led-failsafe = &led_system_blue;
		led-upgrade = &led_system_blue;
	};

	leds {
		compatible = "gpio-leds";

		system_red {
			label = "red:system";
			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
		};

		system_green {
			label = "green:system";
			gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
		};

		led_system_blue: system_blue {
			label = "blue:system";
			gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy0tpt";
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	gpio-export {
		compatible = "gpio-export";
		#size-cells = <0>;

		usb-power {
			gpio-export,name = "usb-power";
			gpio-export,output = <1>;
			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
		};
	};

	sdhci@10130000 {
		compatible = "ralink,mt7620-sdhci";
		reg = <0x10130000 4000>;

		interrupt-parent = <&intc>;
		interrupts = <14>;

		status = "okay";
	};
};

&state_default {
	gpio {
		groups = "gpio", "i2c", "i2s";
		function = "gpio";
	};
};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <50000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x30000>;
				read-only;
			};

			partition@30000 {
				label = "u-boot-env";
				reg = <0x30000 0x10000>;
				read-only;
			};

			factory: partition@40000 {
				label = "factory";
				reg = <0x40000 0x10000>;
				read-only;
			};

			partition@50000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x50000 0x1fb0000>;
			};
		};
	};
};

&ethernet {
	status = "okay";

	mtd-mac-address = <&factory 0x4>;
};

&wmac {
	status = "okay";
};