From ffd7ee4fbd69d477a2156d9cba6ae80434a4c894 Mon Sep 17 00:00:00 2001 From: Xingyu Wu Date: Tue, 14 Mar 2023 17:16:07 +0800 Subject: [PATCH 034/122] clk: starfive: jh7110-sys: Modify PLL clocks source Modify PLL clocks source to be got from dts instead of the fixed factor clocks. Signed-off-by: Xingyu Wu --- drivers/clk/starfive/Kconfig | 1 + .../clk/starfive/clk-starfive-jh7110-sys.c | 31 ++++--------------- 2 files changed, 7 insertions(+), 25 deletions(-) --- a/drivers/clk/starfive/Kconfig +++ b/drivers/clk/starfive/Kconfig @@ -35,6 +35,7 @@ config CLK_STARFIVE_JH7110_SYS select AUXILIARY_BUS select CLK_STARFIVE_JH71X0 select RESET_STARFIVE_JH7110 + select CLK_STARFIVE_JH7110_PLL default ARCH_STARFIVE help Say yes here to support the system clock controller on the --- a/drivers/clk/starfive/clk-starfive-jh7110-sys.c +++ b/drivers/clk/starfive/clk-starfive-jh7110-sys.c @@ -404,29 +404,6 @@ static int __init jh7110_syscrg_probe(st dev_set_drvdata(priv->dev, (void *)(&priv->base)); - /* - * These PLL clocks are not actually fixed factor clocks and can be - * controlled by the syscon registers of JH7110. They will be dropped - * and registered in the PLL clock driver instead. - */ - /* 24MHz -> 1000.0MHz */ - priv->pll[0] = devm_clk_hw_register_fixed_factor(priv->dev, "pll0_out", - "osc", 0, 125, 3); - if (IS_ERR(priv->pll[0])) - return PTR_ERR(priv->pll[0]); - - /* 24MHz -> 1066.0MHz */ - priv->pll[1] = devm_clk_hw_register_fixed_factor(priv->dev, "pll1_out", - "osc", 0, 533, 12); - if (IS_ERR(priv->pll[1])) - return PTR_ERR(priv->pll[1]); - - /* 24MHz -> 1188.0MHz */ - priv->pll[2] = devm_clk_hw_register_fixed_factor(priv->dev, "pll2_out", - "osc", 0, 99, 2); - if (IS_ERR(priv->pll[2])) - return PTR_ERR(priv->pll[2]); - for (idx = 0; idx < JH7110_SYSCLK_END; idx++) { u32 max = jh7110_sysclk_data[idx].max; struct clk_parent_data parents[4] = {}; @@ -464,8 +441,12 @@ static int __init jh7110_syscrg_probe(st parents[i].fw_name = "tdm_ext"; else if (pidx == JH7110_SYSCLK_MCLK_EXT) parents[i].fw_name = "mclk_ext"; - else - parents[i].hw = priv->pll[pidx - JH7110_SYSCLK_PLL0_OUT]; + else if (pidx == JH7110_SYSCLK_PLL0_OUT) + parents[i].fw_name = "pll0_out"; + else if (pidx == JH7110_SYSCLK_PLL1_OUT) + parents[i].fw_name = "pll1_out"; + else if (pidx == JH7110_SYSCLK_PLL2_OUT) + parents[i].fw_name = "pll2_out"; } clk->hw.init = &init;