mb/pcengines/apu2/romstage: use proper GPIO configuration API

Also remove the unused amdblocks/acpimmio.h include in gpio_ftns.c.

Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: If121941c8a6ba88913653192740997aeef426548
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56784
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

2 files changed, 44 insertions, 54 deletions

diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.c b/src/mainboard/pcengines/apu2/gpio_ftns.c
index 28b9a742dd19..1fd6fdaac44a 100644
--- a/src/mainboard/pcengines/apu2/gpio_ftns.c
+++ b/src/mainboard/pcengines/apu2/gpio_ftns.c
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
-#include <amdblocks/acpimmio.h>
 #include <gpio.h>
 #include "gpio_ftns.h"
 
diff --git a/src/mainboard/pcengines/apu2/romstage.c b/src/mainboard/pcengines/apu2/romstage.c
index 09a03094a8a6..9b1435ac79c1 100644
--- a/src/mainboard/pcengines/apu2/romstage.c
+++ b/src/mainboard/pcengines/apu2/romstage.c
@@ -2,6 +2,8 @@
 
 #include <stdint.h>
 #include <amdblocks/acpimmio.h>
+#include <amdblocks/gpio_banks.h>
+#include <amdblocks/gpio_defs.h>
 #include <device/pci_def.h>
 #include <device/pci_ops.h>
 #include <gpio.h>
@@ -28,63 +30,52 @@ void board_BeforeAgesa(struct sysinfo *cb)
 	pm_write8(0xea, 1);
 }
 
-static void pin_input(gpio_t gpio, u8 iomux_ftn)
-{
-	iomux_write8(gpio, iomux_ftn);
-	gpio_input(gpio);
-}
-
-static void pin_low(gpio_t gpio, u8 iomux_ftn)
-{
-	iomux_write8(gpio, iomux_ftn);
-	gpio_output(gpio, 0);
-}
-
-static void pin_high(gpio_t gpio, u8 iomux_ftn)
-{
-	iomux_write8(gpio, iomux_ftn);
-	gpio_output(gpio, 1);
-}
+const struct soc_amd_gpio gpio_common[] = {
+	/* Output disabled, pull up/down disabled */
+	PAD_CFG_STRUCT(GPIO_49, Function2, PAD_PULL(PULL_NONE)),
+	PAD_CFG_STRUCT(GPIO_50, Function2, PAD_PULL(PULL_NONE)),
+	PAD_CFG_STRUCT(GPIO_71, Function0, PAD_PULL(PULL_NONE)),
+	/* Output enabled, value low, pull up/down disabled */
+	PAD_CFG_STRUCT(GPIO_57, Function1, PAD_OUTPUT(LOW)),
+	PAD_CFG_STRUCT(GPIO_58, Function1, PAD_OUTPUT(LOW)),
+	PAD_CFG_STRUCT(GPIO_59, Function3, PAD_OUTPUT(LOW)),
+	/* Output enabled, value high, pull up/down disabled */
+	PAD_CFG_STRUCT(GPIO_51, Function2, PAD_OUTPUT(HIGH)),
+	PAD_CFG_STRUCT(GPIO_55, Function3, PAD_OUTPUT(HIGH)),
+	PAD_CFG_STRUCT(GPIO_64, Function2, PAD_OUTPUT(HIGH)),
+	PAD_CFG_STRUCT(GPIO_68, Function0, PAD_OUTPUT(HIGH)),
+};
+
+const struct soc_amd_gpio gpio_apu2[] = {
+	/* Output disabled, pull up/down disabled */
+	PAD_CFG_STRUCT(GPIO_32, Function0, PAD_PULL(PULL_NONE)),
+};
+
+const struct soc_amd_gpio gpio_apu34[] = {
+	/* Output disabled, pull up/down disabled */
+	PAD_CFG_STRUCT(GPIO_32, Function0, PAD_PULL(PULL_NONE)),
+	/* Output enabled, value low, pull up/down disabled */
+	PAD_CFG_STRUCT(GPIO_33, Function0, PAD_OUTPUT(LOW)),
+};
+
+const struct soc_amd_gpio gpio_apu5[] = {
+	/* Output disabled, pull up/down disabled */
+	PAD_CFG_STRUCT(GPIO_22, Function0, PAD_PULL(PULL_NONE)),
+	/* Output enabled, value high, pull up/down disabled */
+	PAD_CFG_STRUCT(GPIO_32, Function0, PAD_OUTPUT(HIGH)),
+	PAD_CFG_STRUCT(GPIO_33, Function0, PAD_OUTPUT(HIGH)),
+};
 
 static void early_lpc_init(void)
 {
-	//
-	// Configure output disabled, pull up/down disabled
-	//
-	if (CONFIG(BOARD_PCENGINES_APU5))
-		pin_input(GPIO_22, Function0);
-
-	if (CONFIG(BOARD_PCENGINES_APU2) ||
-		CONFIG(BOARD_PCENGINES_APU3) ||
-		CONFIG(BOARD_PCENGINES_APU4)) {
-		pin_input(GPIO_32, Function0);
-	}
+	program_gpios(gpio_common, ARRAY_SIZE(gpio_common));
 
-	pin_input(GPIO_49, Function2);
-	pin_input(GPIO_50, Function2);
-	pin_input(GPIO_71, Function0);
+	if (CONFIG(BOARD_PCENGINES_APU2))
+		program_gpios(gpio_apu2, ARRAY_SIZE(gpio_apu2));
 
-	//
-	// Configure output enabled, value low, pull up/down disabled
-	//
-	if (CONFIG(BOARD_PCENGINES_APU3) ||
-		CONFIG(BOARD_PCENGINES_APU4)) {
-		pin_low(GPIO_33, Function0);
-	}
-	pin_low(GPIO_57, Function1);
-	pin_low(GPIO_58, Function1);
-	pin_low(GPIO_59, Function3);
+	if (CONFIG(BOARD_PCENGINES_APU3) || CONFIG(BOARD_PCENGINES_APU4))
+		program_gpios(gpio_apu34, ARRAY_SIZE(gpio_apu34));
 
-	//
-	// Configure output enabled, value high, pull up/down disabled
-	//
-	if (CONFIG(BOARD_PCENGINES_APU5)) {
-		pin_high(GPIO_32, Function0);
-		pin_high(GPIO_33, Function0);
-	}
-
-	pin_high(GPIO_51, Function2);
-	pin_high(GPIO_55, Function3);
-	pin_high(GPIO_64, Function2);
-	pin_high(GPIO_68, Function0);
+	if (CONFIG(BOARD_PCENGINES_APU5))
+		program_gpios(gpio_apu5, ARRAY_SIZE(gpio_apu5));
 }