summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorKapil Porwal <kapilporwal@google.com>2024-02-22 09:02:50 +0000
committerSubrata Banik <subratabanik@google.com>2024-02-23 07:58:02 +0000
commit6cc725466bcb4636fc91733b28df7c24c7016df7 (patch)
treed0576de9a4505fbb3c2c6dceb0333cb719c156f2
parent425e421e8c58f600a534e0850bcfa80dbd2d2cac (diff)
downloadcoreboot-6cc725466bcb4636fc91733b28df7c24c7016df7.tar.gz
coreboot-6cc725466bcb4636fc91733b28df7c24c7016df7.tar.bz2
coreboot-6cc725466bcb4636fc91733b28df7c24c7016df7.zip
vc/intel/fsp2/twinlake: Add FSP headers
Add FSP header files for Twin Lake. Currently these are just a copy of ADL-N headers. BUG=none BRANCH=firmware-nissa-15217.B TEST=Build and boot Google/Yaviks with Twin Lake kconfig enabled Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I37579335c784866ebbf978e28936abf046a85b48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/80698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
Diffstat
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/twinlake/FirmwareVersionInfoHob.h68
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/twinlake/FspUpd.h48
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/twinlake/FspmUpd.h3244
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/twinlake/FspsUpd.h3975
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/twinlake/MemInfoHob.h320
5 files changed, 7655 insertions, 0 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/twinlake/FirmwareVersionInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/twinlake/FirmwareVersionInfoHob.h
new file mode 100644
index 000000000000..636a9147f4c4
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/twinlake/FirmwareVersionInfoHob.h
@@ -0,0 +1,68 @@
+/** @file
+ Header file for Firmware Version Information
+
+ @copyright
+ Copyright (c) 2015 - 2024, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available under
+ the terms and conditions of the BSD License which accompanies this distribution.
+ The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _FIRMWARE_VERSION_INFO_HOB_H_
+#define _FIRMWARE_VERSION_INFO_HOB_H_
+
+#include <Uefi/UefiMultiPhase.h>
+#include <Pi/PiBootMode.h>
+#include <Pi/PiHob.h>
+
+#pragma pack(1)
+///
+/// Firmware Version Structure
+///
+typedef struct {
+ UINT8 MajorVersion;
+ UINT8 MinorVersion;
+ UINT8 Revision;
+ UINT16 BuildNumber;
+} FIRMWARE_VERSION;
+
+///
+/// Firmware Version Information Structure
+///
+typedef struct {
+ UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name
+ UINT8 VersionStringIndex; ///< Offset 1 Index of Version String
+ FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version
+} FIRMWARE_VERSION_INFO;
+
+#ifndef __SMBIOS_STANDARD_H__
+///
+/// The Smbios structure header.
+///
+typedef struct {
+ UINT8 Type;
+ UINT8 Length;
+ UINT16 Handle;
+} SMBIOS_STRUCTURE;
+#endif
+
+///
+/// Firmware Version Information HOB Structure
+///
+typedef struct {
+ EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB
+ SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB
+ UINT8 Count; ///< Offset 28 Number of FVI elements included.
+///
+/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer
+///
+} FIRMWARE_VERSION_INFO_HOB;
+#pragma pack()
+
+#endif // _FIRMWARE_VERSION_INFO_HOB_H_
diff --git a/src/vendorcode/intel/fsp/fsp2_0/twinlake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/twinlake/FspUpd.h
new file mode 100644
index 000000000000..54c7c64a5fa3
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/twinlake/FspUpd.h
@@ -0,0 +1,48 @@
+/** @file
+
+Copyright (c) 2022 - 2024, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPUPD_H__
+#define __FSPUPD_H__
+
+#include <FspEas.h>
+
+#pragma pack(1)
+
+#define FSPT_UPD_SIGNATURE 0x545F4450554C4441 /* 'ADLUPD_T' */
+
+#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4441 /* 'ADLUPD_M' */
+
+#define FSPS_UPD_SIGNATURE 0x535F4450554C4441 /* 'ADLUPD_S' */
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/twinlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/twinlake/FspmUpd.h
new file mode 100644
index 000000000000..a85327d3c6fb
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/twinlake/FspmUpd.h
@@ -0,0 +1,3244 @@
+/** @file
+
+Copyright (c) 2022 - 2024, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPMUPD_H__
+#define __FSPMUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+
+#include <MemInfoHob.h>
+
+///
+/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC.
+///
+typedef struct {
+ UINT8 Revision; ///< Chipset Init Info Revision
+ UINT8 Rsvd[3]; ///< Reserved
+ UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table
+ UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table
+} CHIPSET_INIT_INFO;
+
+
+/** Fsp M Configuration
+**/
+typedef struct {
+
+/** Offset 0x0040 - Platform Reserved Memory Size
+ The minimum platform memory size required to pass control into DXE
+**/
+ UINT64 PlatformMemorySize;
+
+/** Offset 0x0048 - SPD Data Length
+ Length of SPD Data
+ 0x100:256 Bytes, 0x200:512 Bytes, 0x400:1024 Bytes
+**/
+ UINT16 MemorySpdDataLen;
+
+/** Offset 0x004A - Enable above 4GB MMIO resource support
+ Enable/disable above 4GB MMIO resource support
+ $EN_DIS
+**/
+ UINT8 EnableAbove4GBMmio;
+
+/** Offset 0x004B - Enable/Disable CrashLog Device 10
+ Enable(Default): Enable CPU CrashLog Device 10, Disable: Disable CPU CrashLog
+ $EN_DIS
+**/
+ UINT8 CpuCrashLogDevice;
+
+/** Offset 0x004C - Memory SPD Pointer Controller 0 Channel 0 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr000;
+
+/** Offset 0x0050 - Memory SPD Pointer Controller 0 Channel 0 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr001;
+
+/** Offset 0x0054 - Memory SPD Pointer Controller 0 Channel 1 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr010;
+
+/** Offset 0x0058 - Memory SPD Pointer Controller 0 Channel 1 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr011;
+
+/** Offset 0x005C - Memory SPD Pointer Controller 0 Channel 2 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr020;
+
+/** Offset 0x0060 - Memory SPD Pointer Controller 0 Channel 2 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr021;
+
+/** Offset 0x0064 - Memory SPD Pointer Controller 0 Channel 3 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr030;
+
+/** Offset 0x0068 - Memory SPD Pointer Controller 0 Channel 3 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr031;
+
+/** Offset 0x006C - Memory SPD Pointer Controller 1 Channel 0 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr100;
+
+/** Offset 0x0070 - Memory SPD Pointer Controller 1 Channel 0 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr101;
+
+/** Offset 0x0074 - Memory SPD Pointer Controller 1 Channel 1 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr110;
+
+/** Offset 0x0078 - Memory SPD Pointer Controller 1 Channel 1 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr111;
+
+/** Offset 0x007C - Memory SPD Pointer Controller 1 Channel 2 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr120;
+
+/** Offset 0x0080 - Memory SPD Pointer Controller 1 Channel 2 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr121;
+
+/** Offset 0x0084 - Memory SPD Pointer Controller 1 Channel 3 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr130;
+
+/** Offset 0x0088 - Memory SPD Pointer Controller 1 Channel 3 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr131;
+
+/** Offset 0x008C - RcompResistor settings
+ Indicates RcompResistor settings: Board-dependent
+**/
+ UINT16 RcompResistor;
+
+/** Offset 0x008E - RcompTarget settings
+ RcompTarget settings: board-dependent
+**/
+ UINT16 RcompTarget[5];
+
+/** Offset 0x0098 - Dqs Map CPU to DRAM MC 0 CH 0
+ Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent
+**/
+ UINT8 DqsMapCpu2DramMc0Ch0[2];
+
+/** Offset 0x009A - Dqs Map CPU to DRAM MC 0 CH 1
+ Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent
+**/
+ UINT8 DqsMapCpu2DramMc0Ch1[2];
+
+/** Offset 0x009C - Dqs Map CPU to DRAM MC 0 CH 2
+ Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent
+**/
+ UINT8 DqsMapCpu2DramMc0Ch2[2];
+
+/** Offset 0x009E - Dqs Map CPU to DRAM MC 0 CH 3
+ Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent
+**/
+ UINT8 DqsMapCpu2DramMc0Ch3[2];
+
+/** Offset 0x00A0 - Dqs Map CPU to DRAM MC 1 CH 0
+ Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent
+**/
+ UINT8 DqsMapCpu2DramMc1Ch0[2];
+
+/** Offset 0x00A2 - Dqs Map CPU to DRAM MC 1 CH 1
+ Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent
+**/
+ UINT8 DqsMapCpu2DramMc1Ch1[2];
+
+/** Offset 0x00A4 - Dqs Map CPU to DRAM MC 1 CH 2
+ Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent
+**/
+ UINT8 DqsMapCpu2DramMc1Ch2[2];
+
+/** Offset 0x00A6 - Dqs Map CPU to DRAM MC 1 CH 3
+ Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent
+**/
+ UINT8 DqsMapCpu2DramMc1Ch3[2];
+
+/** Offset 0x00A8 - Dq Map CPU to DRAM MC 0 CH 0
+ Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent
+**/
+ UINT8 DqMapCpu2DramMc0Ch0[16];
+
+/** Offset 0x00B8 - Dq Map CPU to DRAM MC 0 CH 1
+ Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent
+**/
+ UINT8 DqMapCpu2DramMc0Ch1[16];
+
+/** Offset 0x00C8 - Dq Map CPU to DRAM MC 0 CH 2
+ Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependet
+**/
+ UINT8 DqMapCpu2DramMc0Ch2[16];
+
+/** Offset 0x00D8 - Dq Map CPU to DRAM MC 0 CH 3
+ Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent
+**/
+ UINT8 DqMapCpu2DramMc0Ch3[16];
+
+/** Offset 0x00E8 - Dq Map CPU to DRAM MC 1 CH 0
+ Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent
+**/
+ UINT8 DqMapCpu2DramMc1Ch0[16];
+
+/** Offset 0x00F8 - Dq Map CPU to DRAM MC 1 CH 1
+ Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent
+**/
+ UINT8 DqMapCpu2DramMc1Ch1[16];
+
+/** Offset 0x0108 - Dq Map CPU to DRAM MC 1 CH 2
+ Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent
+**/
+ UINT8 DqMapCpu2DramMc1Ch2[16];
+
+/** Offset 0x0118 - Dq Map CPU to DRAM MC 1 CH 3
+ Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent
+**/
+ UINT8 DqMapCpu2DramMc1Ch3[16];
+
+/** Offset 0x0128 - Dqs Pins Interleaved Setting
+ Indicates DqPinsInterleaved setting: board-dependent
+ $EN_DIS
+**/
+ UINT8 DqPinsInterleaved;
+
+/** Offset 0x0129 - Smram Mask
+ The SMM Regions AB-SEG and/or H-SEG reserved
+ 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both
+**/
+ UINT8 SmramMask;
+
+/** Offset 0x012A - Ibecc
+ Enable/Disable Ibecc
+ $EN_DIS
+**/
+ UINT8 Ibecc;
+
+/** Offset 0x012B - IbeccOperationMode
+ In-Band ECC Operation Mode
+ 0:Protect base on address range, 1:Non-protected, 2:All protected
+**/
+ UINT8 IbeccOperationMode;
+
+/** Offset 0x012C - IbeccProtectedRangeEnable
+ In-Band ECC Protected Region Enable
+ $EN_DIS
+**/
+ UINT8 IbeccProtectedRangeEnable[8];
+
+/** Offset 0x0134 - IbeccProtectedRangeBase
+ IBECC Protected Region Base
+**/
+ UINT32 IbeccProtectedRangeBase[8];
+
+/** Offset 0x0154 - IbeccProtectedRangeMask
+ IBECC Protected Region Mask
+**/
+ UINT32 IbeccProtectedRangeMask[8];
+
+/** Offset 0x0174 - MRC Fast Boot
+ Enables/Disable the MRC fast path thru the MRC
+ $EN_DIS
+**/
+ UINT8 MrcFastBoot;
+
+/** Offset 0x0175 - Rank Margin Tool per Task
+ This option enables the user to execute Rank Margin Tool per major training step
+ in the MRC.
+ $EN_DIS
+**/
+ UINT8 RmtPerTask;
+
+/** Offset 0x0176 - Training Trace
+ This option enables the trained state tracing feature in MRC. This feature will
+ print out the key training parameters state across major training steps.
+ $EN_DIS
+**/
+ UINT8 TrainTrace;
+
+/** Offset 0x0177 - Reserved
+**/
+ UINT8 Reserved0;
+
+/** Offset 0x0178 - Tseg Size
+ Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build
+ 0x0400000:4MB, 0x01000000:16MB
+**/
+ UINT32 TsegSize;
+
+/** Offset 0x017C - MMIO Size
+ Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB
+**/
+ UINT16 MmioSize;
+
+/** Offset 0x017E - Probeless Trace
+ Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB.
+ This also requires IED to be enabled.
+ $EN_DIS
+**/
+ UINT8 ProbelessTrace;
+
+/** Offset 0x017F - Enable SMBus
+ Enable/disable SMBus controller.
+ $EN_DIS
+**/
+ UINT8 SmbusEnable;
+
+/** Offset 0x0180 - Spd Address Tabl
+ Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used
+ if SPD Address is 00
+**/
+ UINT8 SpdAddressTable[16];
+
+/** Offset 0x0190 - Platform Debug Consent
+ Enabled(All Probes+TraceHub) supports all probes with TraceHub enabled and blocks
+ s0ix\n
+ \n
+ Enabled(Low Power) does not support DCI OOB 4-wire and Tracehub is powergated by
+ default, s0ix is viable\n
+ \n
+ Manual:user needs to configure Advanced Debug Settings manually, aimed at advanced users
+ 0:Disabled, 2:Enabled (All Probes+TraceHub), 6:Enable (Low Power), 7:Manual
+**/
+ UINT8 PlatformDebugConsent;
+
+/** Offset 0x0191 - DCI Enable
+ Determine if to enable DCI debug from host
+ $EN_DIS
+**/
+ UINT8 DciEn;
+
+/** Offset 0x0192 - DCI DbC Mode
+ Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both:
+ Set both USB2/3DBCEN; No Change: Comply with HW value
+ 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change
+**/
+ UINT8 DciDbcMode;
+
+/** Offset 0x0193 - Enable DCI ModPHY Power Gate
+ DEPRECATED
+ $EN_DIS
+**/
+ UINT8 DciModphyPg;
+
+/** Offset 0x0194 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support
+ This BIOS option enables kernel and platform debug for USB3 interface over a UFP
+ Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting.
+ 0:Disabled, 1:Enabled, 2:No Change
+**/
+ UINT8 DciUsb3TypecUfpDbg;
+
+/** Offset 0x0195 - PCH Trace Hub Mode
+ Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
+ if Trace Hub is used by target debugger software or 'Disable' trace hub functionality.
+ 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode
+**/
+ UINT8 PchTraceHubMode;
+
+/** Offset 0x0196 - PCH Trace Hub Memory Region 0 buffer Size
+ Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 PchTraceHubMemReg0Size;
+
+/** Offset 0x0197 - PCH Trace Hub Memory Region 1 buffer Size
+ Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 PchTraceHubMemReg1Size;
+
+/** Offset 0x0198 - HD Audio DMIC Link Clock Select
+ Determines DMIC<N> Clock Source. 0: Both, 1: ClkA, 2: ClkB
+ 0: Both, 1: ClkA, 2: ClkB
+**/
+ UINT8 PchHdaAudioLinkDmicClockSelect[2];
+
+/** Offset 0x019A - Reserved
+**/
+ UINT8 Reserved1[5];
+
+/** Offset 0x019F - State of X2APIC_OPT_OUT bit in the DMAR table
+ 0=Disable/Clear, 1=Enable/Set
+ $EN_DIS
+**/
+ UINT8 X2ApicOptOut;
+
+/** Offset 0x01A0 - State of DMA_CONTROL_GUARANTEE bit in the DMAR table
+ 0=Disable/Clear, 1=Enable/Set
+ $EN_DIS
+**/
+ UINT8 DmaControlGuarantee;
+
+/** Offset 0x01A1 - Reserved
+**/
+ UINT8 Reserved2[3];
+
+/** Offset 0x01A4 - Base addresses for VT-d function MMIO access
+ Base addresses for VT-d MMIO access per VT-d engine
+**/
+ UINT32 VtdBaseAddress[9];
+
+/** Offset 0x01C8 - Disable VT-d
+ 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled)
+ $EN_DIS
+**/
+ UINT8 VtdDisable;
+
+/** Offset 0x01C9 - Vtd Programming for Igd
+ 1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar
+ programming disabled)
+ $EN_DIS
+**/
+ UINT8 VtdIgdEnable;
+
+/** Offset 0x01CA - Vtd Programming for Ipu
+ 1=Enable/TRUE (Ipu VT-d Bar programming enabled), 0=Disable/FLASE (Ipu VT-d Bar
+ programming disabled)
+ $EN_DIS
+**/
+ UINT8 VtdIpuEnable;
+
+/** Offset 0x01CB - Vtd Programming for Iop
+ 1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar
+ programming disabled)
+ $EN_DIS
+**/
+ UINT8 VtdIopEnable;
+
+/** Offset 0x01CC - Vtd Programming for ITbt
+ DEPRECATED
+ $EN_DIS
+**/
+ UINT8 VtdItbtEnable;
+
+/** Offset 0x01CD - Internal Graphics Pre-allocated Memory
+ Size of memory preallocated for internal graphics.
+ 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB,
+ 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB,
+ 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB
+**/
+ UINT8 IgdDvmt50PreAlloc;
+
+/** Offset 0x01CE - Internal Graphics
+ Enable/disable internal graphics.
+ $EN_DIS
+**/
+ UINT8 InternalGfx;
+
+/** Offset 0x01CF - Aperture Size
+ Select the Aperture Size.
+ 0:128 MB, 1:256 MB, 3:512 MB, 7:1024 MB, 15: 2048 MB
+**/
+ UINT8 ApertureSize;
+
+/** Offset 0x01D0 - Board Type
+ MrcBoardType, Options are 0:Mobile, 1:Desktop1Dpc, 2:Desktop2DpcDaisyChain, 3:Desktop2DpcTeeTopologyAsymmetrical,
+ 4:Desktop2DpcTeeTopology, 5:UltMobile, 7:UP Server
+ 0:Mobile, 1:Desktop1Dpc, 2:Desktop2DpcDaisyChain, 3:Desktop2DpcTeeTopologyAsymmetrical,
+ 4:Desktop2DpcTeeTopology, 5:UltMobile, 7:UP Server
+**/
+ UINT8 UserBd;
+
+/** Offset 0x01D1 - Reserved
+**/
+ UINT8 Reserved3;
+
+/** Offset 0x01D2 - DDR Frequency Limit
+ Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867,
+ 2133, 2400, 2667, 2933 and 0 for Auto.
+ 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
+**/
+ UINT16 DdrFreqLimit;
+
+/** Offset 0x01D4 - SA GV
+ System Agent dynamic frequency support and when enabled memory will be training
+ at four different frequencies.
+ 0:Disabled, 1:FixedPoint0, 2:FixedPoint1, 3:FixedPoint2, 4:FixedPoint3, 5:Enabled
+**/
+ UINT8 SaGv;
+
+/** Offset 0x01D5 - Memory Test on Warm Boot
+ Run Base Memory Test on Warm Boot
+ 0:Disable, 1:Enable
+**/
+ UINT8 MemTestOnWarmBoot;
+
+/** Offset 0x01D6 - DDR Speed Control
+ DDR Frequency and Gear control for all SAGV points.
+ 0:Auto, 1:Manual
+**/
+ UINT8 DdrSpeedControl;
+
+/** Offset 0x01D7 - Rank Margin Tool
+ Enable/disable Rank Margin Tool.
+ $EN_DIS
+**/
+ UINT8 RMT;
+
+/** Offset 0x01D8 - Controller 0 Channel 0 DIMM Control
+ Enable / Disable DIMMs on Controller 0 Channel 0
+ $EN_DIS
+**/
+ UINT8 DisableMc0Ch0;
+
+/** Offset 0x01D9 - Controller 0 Channel 1 DIMM Control
+ Enable / Disable DIMMs on Controller 0 Channel 1
+ $EN_DIS
+**/
+ UINT8 DisableMc0Ch1;
+
+/** Offset 0x01DA - Controller 0 Channel 2 DIMM Control
+ Enable / Disable DIMMs on Controller 0 Channel 2
+ $EN_DIS
+**/
+ UINT8 DisableMc0Ch2;
+
+/** Offset 0x01DB - Controller 0 Channel 3 DIMM Control
+ Enable / Disable DIMMs on Controller 0 Channel 3
+ $EN_DIS
+**/
+ UINT8 DisableMc0Ch3;
+
+/** Offset 0x01DC - Controller 1 Channel 0 DIMM Control
+ Enable / Disable DIMMs on Controller 1 Channel 0
+ $EN_DIS
+**/
+ UINT8 DisableMc1Ch0;
+
+/** Offset 0x01DD - Controller 1 Channel 1 DIMM Control
+ Enable / Disable DIMMs on Controller 1 Channel 1
+ $EN_DIS
+**/
+ UINT8 DisableMc1Ch1;
+
+/** Offset 0x01DE - Controller 1 Channel 2 DIMM Control
+ Enable / Disable DIMMs on Controller 1 Channel 2
+ $EN_DIS
+**/
+ UINT8 DisableMc1Ch2;
+
+/** Offset 0x01DF - Controller 1 Channel 3 DIMM Control
+ Enable / Disable DIMMs on Controller 1 Channel 3
+ $EN_DIS
+**/
+ UINT8 DisableMc1Ch3;
+
+/** Offset 0x01E0 - Scrambler Support
+ This option enables data scrambling in memory.
+ $EN_DIS
+**/
+ UINT8 ScramblerSupport;
+
+/** Offset 0x01E1 - SPD Profile Selected
+ Select DIMM timing profile. Options are 0:Default SPD Profile, 1:Custom Profile,
+ 2:XMP Profile 1, 3:XMP Profile 2, 4:XMP Profile 3, 5:XMP User Profile 4, 6:XMP
+ User Profile 5
+ 0:Default SPD Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2, 4:XMP
+ Profile 3, 5:XMP User Profile 4, 6:XMP User Profile 5
+**/
+ UINT8 SpdProfileSelected;
+
+/** Offset 0x01E2 - Memory Reference Clock
+ 100MHz, 133MHz.
+ 0:133MHz, 1:100MHz
+**/
+ UINT8 RefClk;
+
+/** Offset 0x01E3 - Reserved
+**/
+ UINT8 Reserved4;
+
+/** Offset 0x01E4 - Memory Voltage
+ DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM
+ chips) in millivolts from 0 - default to 1435mv.
+**/
+ UINT16 VddVoltage;
+
+/** Offset 0x01E6 - Memory Ratio
+ Automatic or the frequency will equal ratio times reference clock. Set to Auto to
+ recalculate memory timings listed below.
+ 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15
+**/
+ UINT8 Ratio;
+
+/** Offset 0x01E7 - tCL
+ CAS Latency, 0: AUTO, max: 31. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tCL;
+
+/** Offset 0x01E8 - tCWL
+ Min CAS Write Latency Delay Time, 0: AUTO, max: 34. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tCWL;
+
+/** Offset 0x01E9 - Reserved
+**/
+ UINT8 Reserved5;
+
+/** Offset 0x01EA - tFAW
+ Min Four Activate Window Delay Time, 0: AUTO, max: 63. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tFAW;
+
+/** Offset 0x01EC - tRAS
+ RAS Active Time, 0: AUTO, max: 64. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tRAS;
+
+/** Offset 0x01EE - tRCD/tRP
+ RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63. Only used
+ if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile).
+**/
+ UINT8 tRCDtRP;
+
+/** Offset 0x01EF - Reserved
+**/
+ UINT8 Reserved6;
+
+/** Offset 0x01F0 - tREFI
+ Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tREFI;
+
+/** Offset 0x01F2 - tRFC
+ Min Refresh Recovery Delay Time, 0: AUTO, max: 1023. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tRFC;
+
+/** Offset 0x01F4 - tRRD
+ Min Row Active to Row Active Delay Time, 0: AUTO, max: 15. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tRRD;
+
+/** Offset 0x01F5 - tRTP
+ Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal
+ values: 5, 6, 7, 8, 9, 10, 12. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tRTP;
+
+/** Offset 0x01F6 - tWR
+ Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18,
+ 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile).
+ 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30,
+ 34:34, 40:40
+**/
+ UINT8 tWR;
+
+/** Offset 0x01F7 - tWTR
+ Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tWTR;
+
+/** Offset 0x01F8 - NMode
+ System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N
+**/
+ UINT8 NModeSupport;
+
+/** Offset 0x01F9 - Enable Intel HD Audio (Azalia)
+ 0: Disable, 1: Enable (Default) Azalia controller
+ $EN_DIS
+**/
+ UINT8 PchHdaEnable;
+
+/** Offset 0x01FA - Enable PCH ISH Controller
+ 0: Disable, 1: Enable (Default) ISH Controller
+ $EN_DIS
+**/
+ UINT8 PchIshEnable;
+
+/** Offset 0x01FB - CPU Trace Hub Mode
+ Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
+ if Trace Hub is used by target debugger software or 'Disable' trace hub functionality.
+ 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode
+**/
+ UINT8 CpuTraceHubMode;
+
+/** Offset 0x01FC - CPU Trace Hub Memory Region 0
+ CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 CpuTraceHubMemReg0Size;
+
+/** Offset 0x01FD - CPU Trace Hub Memory Region 1
+ CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 CpuTraceHubMemReg1Size;
+
+/** Offset 0x01FE - SAGV Gear Ratio
+ Gear Selection for SAGV points. 0 - Auto, 1-1 Gear 1, 2-Gear 2
+**/
+ UINT8 SaGvGear[4];
+
+/** Offset 0x0202 - SAGV Frequency
+ SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300.
+**/
+ UINT16 SaGvFreq[4];
+
+/** Offset 0x020A - SAGV Disabled Gear Ratio
+ Gear Selection for SAGV Disabled. 0 - Auto, 1-1 Gear 1, 2-Gear 2
+**/
+ UINT8 GearRatio;
+
+/** Offset 0x020B - HECI Timeouts
+ 0: Disable, 1: Enable (Default) timeout check for HECI
+ $EN_DIS
+**/
+ UINT8 HeciTimeouts;
+
+/** Offset 0x020C - HECI1 BAR address
+ BAR address of HECI1
+**/
+ UINT32 Heci1BarAddress;
+
+/** Offset 0x0210 - HECI2 BAR address
+ BAR address of HECI2
+**/
+ UINT32 Heci2BarAddress;
+
+/** Offset 0x0214 - HECI3 BAR address
+ BAR address of HECI3
+**/
+ UINT32 Heci3BarAddress;
+
+/** Offset 0x0218 - HG dGPU Power Delay
+ HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is
+ 300=300 microseconds
+**/
+ UINT16 HgDelayAfterPwrEn;
+
+/** Offset 0x021A - HG dGPU Reset Delay
+ HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100
+ microseconds
+**/
+ UINT16 HgDelayAfterHoldReset;
+
+/** Offset 0x021C - MMIO size adjustment for AUTO mode
+ Positive number means increasing MMIO size, Negative value means decreasing MMIO
+ size: 0 (Default)=no change to AUTO mode MMIO size
+**/
+ UINT16 MmioSizeAdjustment;
+
+/** Offset 0x021E - PCIe ASPM programming will happen in relation to the Oprom
+ Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default):
+ Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after
+ Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume
+ 0:Before, 1:After
+**/
+ UINT8 InitPcieAspmAfterOprom;
+
+/** Offset 0x021F - Selection of the primary display device
+ 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics
+ 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics
+**/
+ UINT8 PrimaryDisplay;
+
+/** Offset 0x0220 - Selection of PSMI Region size
+ 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0
+ 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB
+**/
+ UINT8 PsmiRegionSize;
+
+/** Offset 0x0221 - Reserved
+**/
+ UINT8 Reserved7[3];
+
+/** Offset 0x0224 - Temporary MMIO address for GMADR
+ Obsolete field now and it has been extended to 64 bit address, used GmAdr64
+**/
+ UINT32 GmAdr;
+
+/** Offset 0x0228 - Temporary MMIO address for GTTMMADR
+ The reference code will use this as Temporary MMIO address space to access GTTMMADR
+ Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr
+ to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO
+ + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB)
+**/
+ UINT32 GttMmAdr;
+
+/** Offset 0x022C - Selection of iGFX GTT Memory size
+ 1=2MB, 2=4MB, 3=8MB, Default is 3
+ 1:2MB, 2:4MB, 3:8MB
+**/
+ UINT16 GttSize;
+
+/** Offset 0x022E - Hybrid Graphics GPIO information for PEG 0
+ Hybrid Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs
+**/
+ UINT8 CpuPcie0Rtd3Gpio[24];
+
+/** Offset 0x0246 - Enable/Disable MRC TXT dependency
+ When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default):
+ MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization
+ $EN_DIS
+**/
+ UINT8 TxtImplemented;
+
+/** Offset 0x0247 - Enable/Disable SA OcSupport
+ Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport
+ $EN_DIS
+**/
+ UINT8 SaOcSupport;
+
+/** Offset 0x0248 - GT slice Voltage Mode
+ 0(Default): Adaptive, 1: Override
+ 0: Adaptive, 1: Override
+**/
+ UINT8 GtVoltageMode;
+
+/** Offset 0x0249 - Maximum GTs turbo ratio override
+ 0(Default)=Minimal/Auto, 60=Maximum
+**/
+ UINT8 GtMaxOcRatio;
+
+/** Offset 0x024A - The voltage offset applied to GT slice
+ 0(Default)=Minimal, 1000=Maximum
+**/
+ UINT16 GtVoltageOffset;
+
+/** Offset 0x024C - The GT slice voltage override which is applied to the entire range of GT frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtVoltageOverride;
+
+/** Offset 0x024E - adaptive voltage applied during turbo frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtExtraTurboVoltage;
+
+/** Offset 0x0250 - voltage offset applied to the SA
+ 0(Default)=Minimal, 1000=Maximum
+**/
+ UINT16 SaVoltageOffset;
+
+/** Offset 0x0252 - PCIe root port Function number for Hybrid Graphics dGPU
+ Root port Index number to indicate which PCIe root port has dGPU
+**/
+ UINT8 RootPortIndex;
+
+/** Offset 0x0253 - Realtime Memory Timing
+ 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform
+ realtime memory timing changes after MRC_DONE.
+ 0: Disabled, 1: Enabled
+**/
+ UINT8 RealtimeMemoryTiming;
+
+/** Offset 0x0254 - iTBT PCIe Multiple Segment setting
+ DEPRECATED
+ $EN_DIS
+**/
+ UINT8 PcieMultipleSegmentEnabled;
+
+/** Offset 0x0255 - Enable/Disable SA IPU
+ Enable(Default): Enable SA IPU, Disable: Disable SA IPU
+ $EN_DIS
+**/
+ UINT8 SaIpuEnable;
+
+/** Offset 0x0256 - Lane Used of CSI port
+ Lane Used of each CSI port
+ 1:x1, 2:x2, 3:x3, 4:x4, 8:x8
+**/
+ UINT8 IpuLaneUsed[8];
+
+/** Offset 0x025E - Lane Used of CSI port
+ Speed of each CSI port
+ 0:Sensor default, 1:<416Mbps, 2:<1.5Gbps, 3:<2Gbps, 4:<2.5Gbps, 5:<4Gbps, 6:>4Gbps
+**/
+ UINT8 CsiSpeed[8];
+
+/** Offset 0x0266 - IMGU CLKOUT Configuration
+ The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 ImguClkOutEn[6];
+
+/** Offset 0x026C - Enable PCIE RP Mask
+ Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
+ for port1, bit1 for port2, and so on.
+**/
+ UINT32 CpuPcieRpEnableMask;
+
+/** Offset 0x0270 - Assertion on Link Down GPIOs
+ GPIO Assertion on Link Down. Disabled(0x0)(Default): Disable assertion on Link Down
+ GPIOs, Enabled(0x1): Enable assertion on Link Down GPIOs
+ 0:Disable, 1:Enable
+**/
+ UINT8 CpuPcieRpLinkDownGpios;
+
+/** Offset 0x0271 - Enable ClockReq Messaging
+ ClockReq Messaging. Disabled(0x0): Disable ClockReq Messaging, Enabled(0x1)(Default):
+ Enable ClockReq Messaging
+ 0:Disable, 1:Enable
+**/
+ UINT8 CpuPcieRpClockReqMsgEnable[3];
+
+/** Offset 0x0274 - PCIE RP Pcie Speed
+ Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3;
+ 4: Gen4 (see: CPU_PCIE_SPEED).
+**/
+ UINT8 CpuPcieRpPcieSpeed[4];
+
+/** Offset 0x0278 - Selection of PSMI Support On/Off
+ 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support
+ $EN_DIS
+**/
+ UINT8 GtPsmiSupport;
+
+/** Offset 0x0279 - Program GPIOs for LFP on DDI port-A device
+ 0=Disabled,1(Default)=eDP, 2=MIPI DSI
+ 0:Disabled, 1:eDP, 2:MIPI DSI
+**/
+ UINT8 DdiPortAConfig;
+
+/** Offset 0x027A - Program GPIOs for LFP on DDI port-B device
+ 0(Default)=Disabled,1=eDP, 2=MIPI DSI
+ 0:Disabled, 1:eDP, 2:MIPI DSI
+**/
+ UINT8 DdiPortBConfig;
+
+/** Offset 0x027B - Enable or disable HPD of DDI port A
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortAHpd;
+
+/** Offset 0x027C - Enable or disable HPD of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBHpd;
+
+/** Offset 0x027D - Enable or disable HPD of DDI port C
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCHpd;
+
+/** Offset 0x027E - Enable or disable HPD of DDI port 1
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort1Hpd;
+
+/** Offset 0x027F - Enable or disable HPD of DDI port 2
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort2Hpd;
+
+/** Offset 0x0280 - Enable or disable HPD of DDI port 3
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort3Hpd;
+
+/** Offset 0x0281 - Enable or disable HPD of DDI port 4
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort4Hpd;
+
+/** Offset 0x0282 - Enable or disable DDC of DDI port A
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortADdc;
+
+/** Offset 0x0283 - Enable or disable DDC of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBDdc;
+
+/** Offset 0x0284 - Enable or disable DDC of DDI port C
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCDdc;
+
+/** Offset 0x0285 - Enable DDC setting of DDI Port 1
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort1Ddc;
+
+/** Offset 0x0286 - Enable DDC setting of DDI Port 2
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort2Ddc;
+
+/** Offset 0x0287 - Enable DDC setting of DDI Port 3
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort3Ddc;
+
+/** Offset 0x0288 - Enable DDC setting of DDI Port 4
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort4Ddc;
+
+/** Offset 0x0289 - Reserved
+**/
+ UINT8 Reserved8[7];
+
+/** Offset 0x0290 - Temporary MMIO address for GMADR
+ The reference code will use this as Temporary MMIO address space to access GMADR
+ Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to
+ (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress
+ - 0x1) (Where ApertureSize = 256MB, 512MB, 1024MB and 2048MB)
+**/
+ UINT64 GmAdr64;
+
+/** Offset 0x0298 - Per-core HT Disable
+ Defines the per-core HT disable mask where: 1 - Disable selected logical core HT,
+ 0 - is ignored. Input is in HEX and each bit maps to a logical core. Ex. A value
+ of '1F' would disable HT for cores 4,3,2,1 and 0. Default is 0, all cores have
+ HT enabled. Range is 0 - 0x7F for max 8 cores. You can only disable up to MAX_CORE_COUNT - 1.
+**/
+ UINT16 PerCoreHtDisable;
+
+/** Offset 0x029A - SA/Uncore voltage mode
+ SA/Uncore voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 SaVoltageMode;
+
+/** Offset 0x029B - Reserved
+**/
+ UINT8 Reserved9;
+
+/** Offset 0x029C - SA/Uncore Voltage Override
+ The SA/Uncore voltage override applicable when SA/Uncore voltage mode is in Override
+ mode. Valid Range 0 to 2000
+**/
+ UINT16 SaVoltageOverride;
+
+/** Offset 0x029E - SA/Uncore Extra Turbo voltage
+ Extra Turbo voltage applicable when SA/Uncore voltage mode is in Adaptive mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 SaExtraTurboVoltage;
+
+/** Offset 0x02A0 - Thermal Velocity Boost Ratio clipping
+ 0(Default): Disabled, 1: Enabled. This service controls Core frequency reduction
+ caused by high package temperatures for processors that implement the Intel Thermal
+ Velocity Boost (TVB) feature
+ 0: Disabled, 1: Enabled
+**/
+ UINT8 TvbRatioClipping;
+
+/** Offset 0x02A1 - Thermal Velocity Boost voltage optimization
+ 0: Disabled, 1: Enabled(Default). This service controls thermal based voltage optimizations
+ for processors that implement the Intel Thermal Velocity Boost (TVB) feature.
+ 0: Disabled, 1: Enabled
+**/
+ UINT8 TvbVoltageOptimization;
+
+/** Offset 0x02A2 - Reserved
+**/
+ UINT8 Reserved10[111];
+
+/** Offset 0x0311 - Enable Gt CLOS
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 GtClosEnable;
+
+/** Offset 0x0312 - DMI Max Link Speed
+ Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1
+ Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed
+ 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3
+**/
+ UINT8 DmiMaxLinkSpeed;
+
+/** Offset 0x0313 - DMI Equalization Phase 2
+ DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default):
+ AUTO - Use the current default method
+ 0:Disable phase2, 1:Enable phase2, 2:Auto
+**/
+ UINT8 DmiGen3EqPh2Enable;
+
+/** Offset 0x0314 - DMI Gen3 Equalization Phase3
+ DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method,
+ HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software
+ Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static
+ EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just
+ Phase1), Disabled(0x4): Bypass Equalization Phase 3
+ 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3
+**/
+ UINT8 DmiGen3EqPh3Method;
+
+/** Offset 0x0315 - Enable/Disable DMI GEN3 Static EQ Phase1 programming
+ Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static
+ Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 DmiGen3ProgramStaticEq;
+
+/** Offset 0x0316 - DeEmphasis control for DMI
+ DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB
+ 0: -6dB, 1: -3.5dB
+**/
+ UINT8 DmiDeEmphasis;
+
+/** Offset 0x0317 - DMI Gen3 Root port preset values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
+**/
+ UINT8 DmiGen3RootPortPreset[8];
+
+/** Offset 0x031F - DMI Gen3 End port preset values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+**/
+ UINT8 DmiGen3EndPointPreset[8];
+
+/** Offset 0x0327 - DMI Gen3 End port Hint values per lane
+ Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 DmiGen3EndPointHint[8];
+
+/** Offset 0x032F - DMI Gen3 RxCTLEp per-Bundle control
+ Range: 0-15, 0 is default for each bundle, must be specified based upon platform design
+**/
+ UINT8 DmiGen3RxCtlePeaking[4];
+
+/** Offset 0x0333 - DMI ASPM Configuration:{Combo
+ Set ASPM Configuration
+ 0:Disabled, 1:L0s, 2:L1, 3:L1L0s
+**/
+ UINT8 DmiAspm;
+
+/** Offset 0x0334 - Enable/Disable DMI GEN3 Hardware Eq
+ Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0)(Default): Disable Hardware Eq,
+ Enabled(0x1): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 DmiHweq;
+
+/** Offset 0x0335 - Enable/Disable CPU DMI GEN3 Phase 23 Bypass
+ CPU DMI GEN3 Phase 23 Bypass. Disabled(0x0)(Default): Disable Phase 23 Bypass, Enabled(0x1):
+ Enable Phase 23 Bypass
+ $EN_DIS
+**/
+ UINT8 Gen3EqPhase23Bypass;
+
+/** Offset 0x0336 - Enable/Disable CPU DMI GEN3 Phase 3 Bypass
+ CPU DMI GEN3 Phase 3 Bypass. Disabled(0x0)(Default): Disable Phase 3 Bypass, Enabled(0x1):
+ Enable Phase 3 Bypass
+ $EN_DIS
+**/
+ UINT8 Gen3EqPhase3Bypass;
+
+/** Offset 0x0337 - Enable/Disable CPU DMI Gen3 EQ Local Transmitter Coefficient Override Enable
+ Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0)(Default):
+ Disable Local Transmitter Coefficient Override, Enabled(0x1): Enable Local Transmitter
+ Coefficient Override
+ $EN_DIS
+**/
+ UINT8 Gen3LtcoEnable;
+
+/** Offset 0x0338 - Enable/Disable CPU DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable
+ Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0)(Default):
+ Disable Remote Transmitter Coefficient/Preset Override, Enabled(0x1): Enable Remote
+ Transmitter Coefficient/Preset Override
+ $EN_DIS
+**/
+ UINT8 Gen3RtcoRtpoEnable;
+
+/** Offset 0x0339 - DMI Gen3 Transmitter Pre-Cursor Coefficient
+ Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10,
+ 2 is default for each lane
+**/
+ UINT8 DmiGen3Ltcpre[8];
+
+/** Offset 0x0341 - DMI Gen3 Transmitter Post-Cursor Coefficient
+ Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default
+ for each lane
+**/
+ UINT8 DmiGen3Ltcpo[8];
+
+/** Offset 0x0349 - PCIE Hw Eq Gen3 CoeffList Cm
+ CPU_PCIE_EQ_PARAM. Coefficient C-1.
+**/
+ UINT8 CpuDmiHwEqGen3CoeffListCm[8];
+
+/** Offset 0x0351 - PCIE Hw Eq Gen3 CoeffList Cp
+ CPU_PCIE_EQ_PARAM. Coefficient C+1.
+**/
+ UINT8 CpuDmiHwEqGen3CoeffListCp[8];
+
+/** Offset 0x0359 - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable
+ Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable,
+ Manual(0x1): Enable DmiGen3DsPresetEnable
+ $EN_DIS
+**/
+ UINT8 DmiGen3DsPresetEnable;
+
+/** Offset 0x035A - DMI Gen3 Root port preset Rx values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default
+ for each lane
+**/
+ UINT8 DmiGen3DsPortRxPreset[8];
+
+/** Offset 0x0362 - DMI Gen3 Root port preset Tx values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default
+ for each lane
+**/
+ UINT8 DmiGen3DsPortTxPreset[8];
+
+/** Offset 0x036A - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable
+ Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable,
+ Manual(0x1): Enable DmiGen3UsPresetEnable
+ $EN_DIS
+**/
+ UINT8 DmiGen3UsPresetEnable;
+
+/** Offset 0x036B - DMI Gen3 Root port preset Rx values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default
+ for each lane
+**/
+ UINT8 DmiGen3UsPortRxPreset[8];
+
+/** Offset 0x0373 - DMI Gen3 Root port preset Tx values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default
+ for each lane
+**/
+ UINT8 DmiGen3UsPortTxPreset[8];
+
+/** Offset 0x037B - Reserved
+**/
+ UINT8 Reserved11[54];
+
+/** Offset 0x03B1 - DMI ASPM Control Configuration:{Combo
+ Set ASPM Control configuration
+ 0:Disabled, 1:L0s, 2:L1, 3:L1L0s
+**/
+ UINT8 DmiAspmCtrl;
+
+/** Offset 0x03B2 - DMI ASPM L1 exit Latency
+ Range: 0-7, 4 is default L1 exit Latency
+**/
+ UINT8 DmiAspmL1ExitLatency;
+
+/** Offset 0x03B3 - BIST on Reset
+ Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 BistOnReset;
+
+/** Offset 0x03B4 - Skip Stop PBET Timer Enable/Disable
+ Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 SkipStopPbet;
+
+/** Offset 0x03B5 - C6DRAM power gating feature
+ This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM
+ power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating
+ feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>.
+ $EN_DIS
+**/
+ UINT8 EnableC6Dram;
+
+/** Offset 0x03B6 - Over clocking support
+ Over clocking support; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 OcSupport;
+
+/** Offset 0x03B7 - Over clocking Lock
+ Over clocking Lock Enable/Disable; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 OcLock;
+
+/** Offset 0x03B8 - Maximum Core Turbo Ratio Override
+ Maximum core turbo ratio override allows to increase CPU core frequency beyond the
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
+**/
+ UINT8 CoreMaxOcRatio;
+
+/** Offset 0x03B9 - Core voltage mode
+ Core voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 CoreVoltageMode;
+
+/** Offset 0x03BA - Maximum clr turbo ratio override
+ Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
+**/
+ UINT8 RingMaxOcRatio;
+
+/** Offset 0x03BB - Hyper Threading Enable/Disable
+ Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 HyperThreading;
+
+/** Offset 0x03BC - Enable or Disable CPU Ratio Override
+ Enable or Disable CPU Ratio Override; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CpuRatioOverride;
+
+/** Offset 0x03BD - CPU ratio value
+ CPU ratio value. Valid Range 0 to 63
+**/
+ UINT8 CpuRatio;
+
+/** Offset 0x03BE - Boot frequency
+ Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.
+ 1: Maximum non-turbo performance. <b>2: Turbo performance </b>
+ 0:0, 1:1, 2:2
+**/
+ UINT8 BootFrequency;
+
+/** Offset 0x03BF - Number of active big cores
+ Number of active big cores(Depends on Number of big cores). Default 0xFF means to
+ active all system supported big cores. <b>0xFF: Active all big cores</b>; 0: Disable
+ all big cores; 1: 1; 2: 2; 3: 3;
+ 0:Disable all big cores, 1:1, 2:2, 3:3, 0xFF:Active all big cores
+**/
+ UINT8 ActiveCoreCount;
+
+/** Offset 0x03C0 - Processor Early Power On Configuration FCLK setting
+ <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.-
+ 2: 400 MHz. - 3: Reserved
+ 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved
+**/
+ UINT8 FClkFrequency;
+
+/** Offset 0x03C1 - Set JTAG power in C10 and deeper power states
+ False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10
+ and deeper power states for debug purpose. <b>0: False</b>; 1: True.
+ 0: False, 1: True
+**/
+ UINT8 JtagC10PowerGateDisable;
+
+/** Offset 0x03C2 - Enable or Disable VMX
+ Enable or Disable VMX; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 VmxEnable;
+
+/** Offset 0x03C3 - AVX2 Ratio Offset
+ 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
+ vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
+**/
+ UINT8 Avx2RatioOffset;
+
+/** Offset 0x03C4 - AVX3 Ratio Offset
+ DEPRECATED
+**/
+ UINT8 Avx3RatioOffset;
+
+/** Offset 0x03C5 - BCLK Adaptive Voltage Enable
+ When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0:
+ Disable;<b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 BclkAdaptiveVoltage;
+
+/** Offset 0x03C6 - core voltage override
+ The core voltage override which is applied to the entire range of cpu core frequencies.
+ Valid Range 0 to 2000
+**/
+ UINT16 CoreVoltageOverride;
+
+/** Offset 0x03C8 - Core Turbo voltage Adaptive
+ Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 CoreVoltageAdaptive;
+
+/** Offset 0x03CA - Core Turbo voltage Offset
+ The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000
+**/
+ UINT16 CoreVoltageOffset;
+
+/** Offset 0x03CC - Core PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-15
+**/
+ UINT8 CorePllVoltageOffset;
+
+/** Offset 0x03CD - Reserved
+**/
+ UINT8 Reserved12;
+
+/** Offset 0x03CE - Ring Downbin
+ Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always
+ lower than the core ratio.0: Disable; <b>1: Enable.</b>
+ $EN_DIS
+**/
+ UINT8 RingDownBin;
+
+/** Offset 0x03CF - Ring voltage mode
+ Ring voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 RingVoltageMode;
+
+/** Offset 0x03D0 - TjMax Offset
+ TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support
+ TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63
+**/
+ UINT8 TjMaxOffset;
+
+/** Offset 0x03D1 - Reserved
+**/
+ UINT8 Reserved13;
+
+/** Offset 0x03D2 - Ring voltage override
+ The ring voltage override which is applied to the entire range of cpu ring frequencies.
+ Valid Range 0 to 2000
+**/
+ UINT16 RingVoltageOverride;
+
+/** Offset 0x03D4 - Ring Turbo voltage Adaptive
+ Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 RingVoltageAdaptive;
+
+/** Offset 0x03D6 - Ring Turbo voltage Offset
+ The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000
+**/
+ UINT16 RingVoltageOffset;
+
+/** Offset 0x03D8 - Enable or Disable TME
+ Enable or Disable TME; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 TmeEnable;
+
+/** Offset 0x03D9 - Enable CPU CrashLog
+ Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 CpuCrashLogEnable;
+
+/** Offset 0x03DA - CPU Run Control
+ Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2:
+ No Change</b>
+ 0:Disabled, 1:Enabled, 2:No Change
+**/
+ UINT8 DebugInterfaceEnable;
+
+/** Offset 0x03DB - CPU Run Control Lock
+ Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DebugInterfaceLockEnable;
+
+/** Offset 0x03DC - Reserved
+**/
+ UINT8 Reserved14[24];
+
+/** Offset 0x03F4 - Core VF Point Offset Mode
+ Selects Core Voltage & Frequency Offset mode between Legacy and Selection modes.
+ In Legacy Mode, setting a global offset for the entire VF curve. In Selection Mode,
+ setting a selected VF point; <b>0: Legacy</b>; 1: Selection.
+ 0:Legacy, 1:Selection
+**/
+ UINT8 CoreVfPointOffsetMode;
+
+/** Offset 0x03F5 - Reserved
+**/
+ UINT8 Reserved15;
+
+/** Offset 0x03F6 - Core VF Point Offset
+ Array used to specifies the Core Voltage Offset applied to the each selected VF
+ Point. This voltage is specified in millivolts.
+**/
+ UINT16 CoreVfPointOffset[15];
+
+/** Offset 0x0414 - Core VF Point Offset Prefix
+ Sets the CoreVfPointOffset value as positive or negative for corresponding core
+ VF Point; <b>0: Positive </b>; 1: Negative.
+ 0:Positive, 1:Negative
+**/
+ UINT8 CoreVfPointOffsetPrefix[15];
+
+/** Offset 0x0423 - Core VF Point Ratio
+ Array for the each selected Core VF Point to display the ration.
+**/
+ UINT8 CoreVfPointRatio[15];
+
+/** Offset 0x0432 - Core VF Point Count
+ Number of supported Core Voltage & Frequency Point Offset
+**/
+ UINT8 CoreVfPointCount;
+
+/** Offset 0x0433 - Reserved
+**/
+ UINT8 Reserved16[25];
+
+/** Offset 0x044C - Per Core Max Ratio override
+ Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new
+ favored core ratio to each Core. <b>0: Disable</b>, 1: enable
+ $EN_DIS
+**/
+ UINT8 PerCoreRatioOverride;
+
+/** Offset 0x044D - Per Core Current Max Ratio
+ Array for the Per Core Max Ratio
+**/
+ UINT8 PerCoreRatio[8];
+
+/** Offset 0x0455 - Reserved
+**/
+ UINT8 Reserved17[5];
+
+/** Offset 0x045A - Pvd Ratio Threshold
+ Select PVD Ratio Threshold Value from Range 1 to 40. 0 - Auto/Default.
+**/
+ UINT8 PvdRatioThreshold;
+
+/** Offset 0x045B - Support Unlimited ICCMAX
+ DEPRECATED
+ $EN_DIS
+**/
+ UINT8 UnlimitedIccMax;
+
+/** Offset 0x045C - Enable CPU CrashLog GPRs dump
+ Enable or Disable CPU CrashLog GPRs dump; <b>0: Disable</b>; 1: Enable; 2: Only
+ disable Smm GPRs dump
+ 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled
+**/
+ UINT8 CrashLogGprs;
+
+/** Offset 0x045D - Reserved
+**/
+ UINT8 Reserved18[62];
+
+/** Offset 0x049B - BCLK Frequency Source
+ Clock source of BCLK OC frequency, <b>1:CPU BCLK</b>, 2:PCH BCLK, 3:External CLK
+ 1:CPU BCLK, 2:PCH BCLK, 3:External CLK
+**/
+ UINT8 BclkSource;
+
+/** Offset 0x049C - GPIO Override
+ Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings
+ before moved to FSP. Available configurations 0: Disable; 1: Level 1 - Skips GPIO
+ configuration in PEI/FSPM/FSPT phase;2: Level 2 - Reserved for future use
+**/
+ UINT8 GpioOverride;
+
+/** Offset 0x049D - Reserved
+**/
+ UINT8 Reserved19[3];
+
+/** Offset 0x04A0 - CPU BCLK OC Frequency
+ CPU BCLK OC Frequency in 10KHz units increasing. Value 9800 (10KHz) = 98MHz <b>0
+ - Auto</b>. Range is 8000-50000 (10KHz).
+**/
+ UINT32 CpuBclkOcFrequency;
+
+/** Offset 0x04A4 - Reserved
+**/
+ UINT8 Reserved20[40];
+
+/** Offset 0x04CC - BiosGuard
+ Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable
+ $EN_DIS
+**/
+ UINT8 BiosGuard;
+
+/** Offset 0x04CD
+**/
+ UINT8 BiosGuardToolsInterface;
+
+/** Offset 0x04CE - Txt
+ Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable
+ $EN_DIS
+**/
+ UINT8 Txt;
+
+/** Offset 0x04CF - Reserved
+**/
+ UINT8 Reserved21;
+
+/** Offset 0x04D0 - PrmrrSize
+ Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable
+**/
+ UINT32 PrmrrSize;
+
+/** Offset 0x04D4 - SinitMemorySize
+ Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable
+**/
+ UINT32 SinitMemorySize;
+
+/** Offset 0x04D8 - TxtDprMemoryBase
+ Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable
+**/
+ UINT64 TxtDprMemoryBase;
+
+/** Offset 0x04E0 - TxtHeapMemorySize
+ Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable
+**/
+ UINT32 TxtHeapMemorySize;
+
+/** Offset 0x04E4 - TxtDprMemorySize
+ Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable
+**/
+ UINT32 TxtDprMemorySize;
+
+/** Offset 0x04E8 - BiosAcmBase
+ Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
+**/
+ UINT32 BiosAcmBase;
+
+/** Offset 0x04EC - BiosAcmSize
+ Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable
+**/
+ UINT32 BiosAcmSize;
+
+/** Offset 0x04F0 - ApStartupBase
+ Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
+**/
+ UINT32 ApStartupBase;
+
+/** Offset 0x04F4 - TgaSize
+ Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable
+**/
+ UINT32 TgaSize;
+
+/** Offset 0x04F8 - TxtLcpPdBase
+ Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable
+**/
+ UINT64 TxtLcpPdBase;
+
+/** Offset 0x0500 - TxtLcpPdSize
+ Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable
+**/
+ UINT64 TxtLcpPdSize;
+
+/** Offset 0x0508 - IsTPMPresence
+ IsTPMPresence default values
+**/
+ UINT8 IsTPMPresence;
+
+/** Offset 0x0509 - Reserved
+**/
+ UINT8 Reserved22[32];
+
+/** Offset 0x0529 - Enable PCH HSIO PCIE Rx Set Ctle
+ Enable PCH PCIe Gen 3 Set CTLE Value.
+**/
+ UINT8 PchPcieHsioRxSetCtleEnable[28];
+
+/** Offset 0x0545 - PCH HSIO PCIE Rx Set Ctle Value
+ PCH PCIe Gen 3 Set CTLE Value.
+**/
+ UINT8 PchPcieHsioRxSetCtle[28];
+
+/** Offset 0x0561 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[28];
+
+/** Offset 0x057D - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen1DownscaleAmp[28];
+
+/** Offset 0x0599 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[28];
+
+/** Offset 0x05B5 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen2DownscaleAmp[28];
+
+/** Offset 0x05D1 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[28];
+
+/** Offset 0x05ED - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen3DownscaleAmp[28];
+
+/** Offset 0x0609 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen1DeEmphEnable[28];
+
+/** Offset 0x0625 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value
+ PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen1DeEmph[28];
+
+/** Offset 0x0641 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[28];
+
+/** Offset 0x065D - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value
+ PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph3p5[28];
+
+/** Offset 0x0679 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[28];
+
+/** Offset 0x0695 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value
+ PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph6p0[28];
+
+/** Offset 0x06B1 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen1EqBoostMagEnable[8];
+
+/** Offset 0x06B9 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen1EqBoostMag[8];
+
+/** Offset 0x06C1 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen2EqBoostMagEnable[8];
+
+/** Offset 0x06C9 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen2EqBoostMag[8];
+
+/** Offset 0x06D1 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen3EqBoostMagEnable[8];
+
+/** Offset 0x06D9 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen3EqBoostMag[8];
+
+/** Offset 0x06E1 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8];
+
+/** Offset 0x06E9 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen1DownscaleAmp[8];
+
+/** Offset 0x06F1 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8];
+
+/** Offset 0x06F9 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen2DownscaleAmp[8];
+
+/** Offset 0x0701 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8];
+
+/** Offset 0x0709 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen3DownscaleAmp[8];
+
+/** Offset 0x0711 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen1DeEmphEnable[8];
+
+/** Offset 0x0719 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen1DeEmph[8];
+
+/** Offset 0x0721 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen2DeEmphEnable[8];
+
+/** Offset 0x0729 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen2DeEmph[8];
+
+/** Offset 0x0731 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen3DeEmphEnable[8];
+
+/** Offset 0x0739 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen3DeEmph[8];
+
+/** Offset 0x0741 - PCH LPC Enhanced Port 80 Decoding
+ Original LPC only decodes one byte of port 80h.
+ $EN_DIS
+**/
+ UINT8 PchLpcEnhancePort8xhDecoding;
+
+/** Offset 0x0742 - PCH Port80 Route
+ Control where the Port 80h cycles are sent, 0: LPC; 1: PCI.
+ 0:LPC, 1:PCI
+**/
+ UINT8 PchPort80Route;
+
+/** Offset 0x0743 - Enable SMBus ARP support
+ Enable SMBus ARP support.
+ $EN_DIS
+**/
+ UINT8 SmbusArpEnable;
+
+/** Offset 0x0744 - Number of RsvdSmbusAddressTable.
+ The number of elements in the RsvdSmbusAddressTable.
+**/
+ UINT8 PchNumRsvdSmbusAddresses;
+
+/** Offset 0x0745 - Reserved
+**/
+ UINT8 Reserved23;
+
+/** Offset 0x0746 - SMBUS Base Address
+ SMBUS Base Address (IO space).
+**/
+ UINT16 PchSmbusIoBase;
+
+/** Offset 0x0748 - Enable SMBus Alert Pin
+ Enable SMBus Alert Pin.
+ $EN_DIS
+**/
+ UINT8 PchSmbAlertEnable;
+
+/** Offset 0x0749 - Usage type for ClkSrc
+ 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
+ (free running), 0xFF: not used
+**/
+ UINT8 PcieClkSrcUsage[18];
+
+/** Offset 0x075B - Reserved
+**/
+ UINT8 Reserved24[14];
+
+/** Offset 0x0769 - ClkReq-to-ClkSrc mapping
+ Number of ClkReq signal assigned to ClkSrc
+**/
+ UINT8 PcieClkSrcClkReq[18];
+
+/** Offset 0x077B - Reserved
+**/
+ UINT8 Reserved25[93];
+
+/** Offset 0x07D8 - Enable PCIE RP Mask
+ Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
+ for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpEnableMask;
+
+/** Offset 0x07DC - VC Type
+ Virtual Channel Type Select: 0: VC0, 1: VC1.
+ 0: VC0, 1: VC1
+**/
+ UINT8 PchHdaVcType;
+
+/** Offset 0x07DD - Universal Audio Architecture compliance for DSP enabled system
+ 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox
+ driver or SST driver supported).
+ $EN_DIS
+**/
+ UINT8 PchHdaDspUaaCompliance;
+
+/** Offset 0x07DE - Enable HD Audio Link
+ Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkHdaEnable;
+
+/** Offset 0x07DF - Enable HDA SDI lanes
+ Enable/disable HDA SDI lanes.
+**/
+ UINT8 PchHdaSdiEnable[2];
+
+/** Offset 0x07E1 - HDA Power/Clock Gating (PGD/CGD)
+ Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1:
+ FORCE_ENABLE, 2: FORCE_DISABLE.
+ 0: POR, 1: Force Enable, 2: Force Disable
+**/
+ UINT8 PchHdaTestPowerClockGating;
+
+/** Offset 0x07E2 - Enable HD Audio DMIC_N Link
+ Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
+**/
+ UINT8 PchHdaAudioLinkDmicEnable[2];
+
+/** Offset 0x07E4 - DMIC<N> ClkA Pin Muxing (N - DMIC number)
+ Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_*
+**/
+ UINT32 PchHdaAudioLinkDmicClkAPinMux[2];
+
+/** Offset 0x07EC - DMIC<N> ClkB Pin Muxing
+ Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKB_*
+**/
+ UINT32 PchHdaAudioLinkDmicClkBPinMux[2];
+
+/** Offset 0x07F4 - Enable HD Audio DSP
+ Enable/disable HD Audio DSP feature.
+ $EN_DIS
+**/
+ UINT8 PchHdaDspEnable;
+
+/** Offset 0x07F5 - Reserved
+**/
+ UINT8 Reserved26[3];
+
+/** Offset 0x07F8 - DMIC<N> Data Pin Muxing
+ Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_*
+**/
+ UINT32 PchHdaAudioLinkDmicDataPinMux[2];
+
+/** Offset 0x0800 - Enable HD Audio SSP0 Link
+ Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5
+**/
+ UINT8 PchHdaAudioLinkSspEnable[6];
+
+/** Offset 0x0806 - Enable HD Audio SoundWire#N Link
+ Enable/disable HD Audio SNDW#N link. Muxed with HDA.
+**/
+ UINT8 PchHdaAudioLinkSndwEnable[4];
+
+/** Offset 0x080A - iDisp-Link Frequency
+ iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz.
+ 4: 96MHz, 3: 48MHz
+**/
+ UINT8 PchHdaIDispLinkFrequency;
+
+/** Offset 0x080B - iDisp-Link T-mode
+ iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T
+ 0: 2T, 2: 4T, 3: 8T, 4: 16T
+**/
+ UINT8 PchHdaIDispLinkTmode;
+
+/** Offset 0x080C - iDisplay Audio Codec disconnection
+ 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable.
+ $EN_DIS
+**/
+ UINT8 PchHdaIDispCodecDisconnect;
+
+/** Offset 0x080D - CNVi DDR RFI Mitigation
+ Enable/Disable DDR RFI Mitigation. Default is ENABLE. 0: DISABLE, 1: ENABLE
+ $EN_DIS
+**/
+ UINT8 CnviDdrRfim;
+
+/** Offset 0x080E - Debug Interfaces
+ Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub,
+ BIT2 - Not used.
+**/
+ UINT8 PcdDebugInterfaceFlags;
+
+/** Offset 0x080F - Serial Io Uart Debug Controller Number
+ Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT
+ Core interface, it cannot be used for debug purpose.
+ 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
+**/
+ UINT8 SerialIoUartDebugControllerNumber;
+
+/** Offset 0x0810 - Serial Io Uart Debug Auto Flow
+ Enables UART hardware flow control, CTS and RTS lines.
+ $EN_DIS
+**/
+ UINT8 SerialIoUartDebugAutoFlow;
+
+/** Offset 0x0811 - Reserved
+**/
+ UINT8 Reserved27[3];
+
+/** Offset 0x0814 - Serial Io Uart Debug BaudRate
+ Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600,
+ 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000
+**/
+ UINT32 SerialIoUartDebugBaudRate;
+
+/** Offset 0x0818 - Serial Io Uart Debug Parity
+ Set default Parity.
+ 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 SerialIoUartDebugParity;
+
+/** Offset 0x0819 - Serial Io Uart Debug Stop Bits
+ Set default stop bits.
+ 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
+**/
+ UINT8 SerialIoUartDebugStopBits;
+
+/** Offset 0x081A - Serial Io Uart Debug Data Bits
+ Set default word length. 0: Default, 5,6,7,8
+ 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS
+**/
+ UINT8 SerialIoUartDebugDataBits;
+
+/** Offset 0x081B - Reserved
+**/
+ UINT8 Reserved28;
+
+/** Offset 0x081C - Serial Io Uart Debug Mmio Base
+ Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode
+ = SerialIoUartPci.
+**/
+ UINT32 SerialIoUartDebugMmioBase;
+
+/** Offset 0x0820 - ISA Serial Base selection
+ Select ISA Serial Base address. Default is 0x3F8.
+ 0:0x3F8, 1:0x2F8
+**/
+ UINT8 PcdIsaSerialUartBase;
+
+/** Offset 0x0821 - GT PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-15
+**/
+ UINT8 GtPllVoltageOffset;
+
+/** Offset 0x0822 - Ring PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-15
+**/
+ UINT8 RingPllVoltageOffset;
+
+/** Offset 0x0823 - System Agent PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-15
+**/
+ UINT8 SaPllVoltageOffset;
+
+/** Offset 0x0824 - Memory Controller PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-15
+**/
+ UINT8 McPllVoltageOffset;
+
+/** Offset 0x0825 - MRC Safe Config
+ Enables/Disable MRC Safe Config
+ $EN_DIS
+**/
+ UINT8 MrcSafeConfig;
+
+/** Offset 0x0826 - TCSS Thunderbolt PCIE Root Port 0 Enable
+ Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie0En;
+
+/** Offset 0x0827 - TCSS Thunderbolt PCIE Root Port 1 Enable
+ Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie1En;
+
+/** Offset 0x0828 - TCSS Thunderbolt PCIE Root Port 2 Enable
+ Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie2En;
+
+/** Offset 0x0829 - TCSS Thunderbolt PCIE Root Port 3 Enable
+ Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie3En;
+
+/** Offset 0x082A - TCSS USB HOST (xHCI) Enable
+ Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below
+ $EN_DIS
+**/
+ UINT8 TcssXhciEn;
+
+/** Offset 0x082B - TCSS USB DEVICE (xDCI) Enable
+ Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled
+ $EN_DIS
+**/
+ UINT8 TcssXdciEn;
+
+/** Offset 0x082C - TCSS DMA0 Enable
+ Set TCSS DMA0. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssDma0En;
+
+/** Offset 0x082D - TCSS DMA1 Enable
+ Set TCSS DMA1. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssDma1En;
+
+/** Offset 0x082E - PcdSerialDebugBaudRate
+ Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200.
+ 3:9600, 4:19200, 6:56700, 7:115200
+**/
+ UINT8 PcdSerialDebugBaudRate;
+
+/** Offset 0x082F - HobBufferSize
+ Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB
+ total HOB size).
+ 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value
+**/
+ UINT8 HobBufferSize;
+
+/** Offset 0x0830 - Early Command Training
+ Enables/Disable Early Command Training
+ $EN_DIS
+**/
+ UINT8 ECT;
+
+/** Offset 0x0831 - SenseAmp Offset Training
+ Enables/Disable SenseAmp Offset Training
+ $EN_DIS
+**/
+ UINT8 SOT;
+
+/** Offset 0x0832 - Early ReadMPR Timing Centering 2D
+ Enables/Disable Early ReadMPR Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 ERDMPRTC2D;
+
+/** Offset 0x0833 - Read MPR Training
+ Enables/Disable Read MPR Training
+ $EN_DIS
+**/
+ UINT8 RDMPRT;
+
+/** Offset 0x0834 - Receive Enable Training
+ Enables/Disable Receive Enable Training
+ $EN_DIS
+**/
+ UINT8 RCVET;
+
+/** Offset 0x0835 - Jedec Write Leveling
+ Enables/Disable Jedec Write Leveling
+ $EN_DIS
+**/
+ UINT8 JWRL;
+
+/** Offset 0x0836 - Early Write Time Centering 2D
+ Enables/Disable Early Write Time Centering 2D
+ $EN_DIS
+**/
+ UINT8 EWRTC2D;
+
+/** Offset 0x0837 - Early Read Time Centering 2D
+ Enables/Disable Early Read Time Centering 2D
+ $EN_DIS
+**/
+ UINT8 ERDTC2D;
+
+/** Offset 0x0838 - Write Timing Centering 1D
+ Enables/Disable Write Timing Centering 1D
+ $EN_DIS
+**/
+ UINT8 WRTC1D;
+
+/** Offset 0x0839 - Write Voltage Centering 1D
+ Enables/Disable Write Voltage Centering 1D
+ $EN_DIS
+**/
+ UINT8 WRVC1D;
+
+/** Offset 0x083A - Read Timing Centering 1D
+ Enables/Disable Read Timing Centering 1D
+ $EN_DIS
+**/
+ UINT8 RDTC1D;
+
+/** Offset 0x083B - Dimm ODT Training
+ Enables/Disable Dimm ODT Training
+ $EN_DIS
+**/
+ UINT8 DIMMODTT;
+
+/** Offset 0x083C - DIMM RON Training
+ Enables/Disable DIMM RON Training
+ $EN_DIS
+**/
+ UINT8 DIMMRONT;
+
+/** Offset 0x083D - Write Drive Strength/Equalization 2D
+ Enables/Disable Write Drive Strength/Equalization 2D
+ $EN_DIS
+**/
+ UINT8 WRDSEQT;
+
+/** Offset 0x083E - Write Slew Rate Training
+ Enables/Disable Write Slew Rate Training
+ $EN_DIS
+**/
+ UINT8 WRSRT;
+
+/** Offset 0x083F - Read ODT Training
+ Enables/Disable Read ODT Training
+ $EN_DIS
+**/
+ UINT8 RDODTT;
+
+/** Offset 0x0840 - Read Equalization Training
+ Enables/Disable Read Equalization Training
+ $EN_DIS
+**/
+ UINT8 RDEQT;
+
+/** Offset 0x0841 - Read Amplifier Training
+ Enables/Disable Read Amplifier Training
+ $EN_DIS
+**/
+ UINT8 RDAPT;
+
+/** Offset 0x0842 - Write Timing Centering 2D
+ Enables/Disable Write Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 WRTC2D;
+
+/** Offset 0x0843 - Read Timing Centering 2D
+ Enables/Disable Read Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 RDTC2D;
+
+/** Offset 0x0844 - Write Voltage Centering 2D
+ Enables/Disable Write Voltage Centering 2D
+ $EN_DIS
+**/
+ UINT8 WRVC2D;
+
+/** Offset 0x0845 - Read Voltage Centering 2D
+ Enables/Disable Read Voltage Centering 2D
+ $EN_DIS
+**/
+ UINT8 RDVC2D;
+
+/** Offset 0x0846 - Command Voltage Centering
+ Enables/Disable Command Voltage Centering
+ $EN_DIS
+**/
+ UINT8 CMDVC;
+
+/** Offset 0x0847 - Late Command Training
+ Enables/Disable Late Command Training
+ $EN_DIS
+**/
+ UINT8 LCT;
+
+/** Offset 0x0848 - Round Trip Latency Training
+ Enables/Disable Round Trip Latency Training
+ $EN_DIS
+**/
+ UINT8 RTL;
+
+/** Offset 0x0849 - Turn Around Timing Training
+ Enables/Disable Turn Around Timing Training
+ $EN_DIS
+**/
+ UINT8 TAT;
+
+/** Offset 0x084A - Memory Test
+ Enables/Disable Memory Test
+ $EN_DIS
+**/
+ UINT8 MEMTST;
+
+/** Offset 0x084B - DIMM SPD Alias Test
+ Enables/Disable DIMM SPD Alias Test
+ $EN_DIS
+**/
+ UINT8 ALIASCHK;
+
+/** Offset 0x084C - Receive Enable Centering 1D
+ Enables/Disable Receive Enable Centering 1D
+ $EN_DIS
+**/
+ UINT8 RCVENC1D;
+
+/** Offset 0x084D - Retrain Margin Check
+ Enables/Disable Retrain Margin Check
+ $EN_DIS
+**/
+ UINT8 RMC;
+
+/** Offset 0x084E - Write Drive Strength Up/Dn independently
+ Enables/Disable Write Drive Strength Up/Dn independently
+ $EN_DIS
+**/
+ UINT8 WRDSUDT;
+
+/** Offset 0x084F - ECC Support
+ Enables/Disable ECC Support
+ $EN_DIS
+**/
+ UINT8 EccSupport;
+
+/** Offset 0x0850 - Memory Remap
+ Enables/Disable Memory Remap
+ $EN_DIS
+**/
+ UINT8 RemapEnable;
+
+/** Offset 0x0851 - Rank Interleave support
+ Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at
+ the same time.
+ $EN_DIS
+**/
+ UINT8 RankInterleave;
+
+/** Offset 0x0852 - Enhanced Interleave support
+ Enables/Disable Enhanced Interleave support
+ $EN_DIS
+**/
+ UINT8 EnhancedInterleave;
+
+/** Offset 0x0853 - Ch Hash Support
+ Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode
+ $EN_DIS
+**/
+ UINT8 ChHashEnable;
+
+/** Offset 0x0854 - Reserved
+**/
+ UINT8 Reserved29;
+
+/** Offset 0x0855 - Extern Therm Status
+ Enables/Disable Extern Therm Status
+ $EN_DIS
+**/
+ UINT8 EnableExtts;
+
+/** Offset 0x0856 - DDR PowerDown and idle counter
+ Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 EnablePwrDn;
+
+/** Offset 0x0857 - DDR PowerDown and idle counter
+ Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 EnablePwrDnLpddr;
+
+/** Offset 0x0858 - SelfRefresh Enable
+ Enables/Disable SelfRefresh Enable
+ $EN_DIS
+**/
+ UINT8 SrefCfgEna;
+
+/** Offset 0x0859 - Throttler CKEMin Defeature
+ Enables/Disable Throttler CKEMin Defeature(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 ThrtCkeMinDefeatLpddr;
+
+/** Offset 0x085A - Throttler CKEMin Defeature
+ Enables/Disable Throttler CKEMin Defeature
+ $EN_DIS
+**/
+ UINT8 ThrtCkeMinDefeat;
+
+/** Offset 0x085B - Reserved
+**/
+ UINT8 Reserved30;
+
+/** Offset 0x085C - Exit On Failure (MRC)
+ Enables/Disable Exit On Failure (MRC)
+ $EN_DIS
+**/
+ UINT8 ExitOnFailure;
+
+/** Offset 0x085D - New Features 1 - MRC
+ New Feature Enabling 1, <b>0:Disable</b>, 1:Enable
+ 0:Disable, 1:Enable
+**/
+ UINT8 NewFeatureEnable1;
+
+/** Offset 0x085E - New Features 2 - MRC
+ New Feature Enabling 2, <b>0:Disable</b>, 1:Enable
+ 0:Disable, 1:Enable
+**/
+ UINT8 NewFeatureEnable2;
+
+/** Offset 0x085F - Duty Cycle Correction Training
+ Enable/Disable Duty Cycle Correction Training
+ $EN_DIS
+**/
+ UINT8 DCC;
+
+/** Offset 0x0860 - Read Voltage Centering 1D
+ Enable/Disable Read Voltage Centering 1D
+ $EN_DIS
+**/
+ UINT8 RDVC1D;
+
+/** Offset 0x0861 - TxDqTCO Comp Training
+ Enable/Disable TxDqTCO Comp Training
+ $EN_DIS
+**/
+ UINT8 TXTCO;
+
+/** Offset 0x0862 - ClkTCO Comp Training
+ Enable/Disable ClkTCO Comp Training
+ $EN_DIS
+**/
+ UINT8 CLKTCO;
+
+/** Offset 0x0863 - CMD Slew Rate Training
+ Enable/Disable CMD Slew Rate Training
+ $EN_DIS
+**/
+ UINT8 CMDSR;
+
+/** Offset 0x0864 - CMD Drive Strength and Tx Equalization
+ Enable/Disable CMD Drive Strength and Tx Equalization
+ $EN_DIS
+**/
+ UINT8 CMDDSEQ;
+
+/** Offset 0x0865 - DIMM CA ODT Training
+ Enable/Disable DIMM CA ODT Training
+ $EN_DIS
+**/
+ UINT8 DIMMODTCA;
+
+/** Offset 0x0866 - TxDqsTCO Comp Training
+ Enable/Disable TxDqsTCO Comp Training
+ $EN_DIS
+**/
+ UINT8 TXTCODQS;
+
+/** Offset 0x0867 - CMD/CTL Drive Strength Up/Dn 2D
+ Enable/Disable CMD/CTL Drive Strength Up/Dn 2D
+ $EN_DIS
+**/
+ UINT8 CMDDRUD;
+
+/** Offset 0x0868 - VccDLL Bypass Training
+ Enable/Disable VccDLL Bypass Training
+ $EN_DIS
+**/
+ UINT8 VCCDLLBP;
+
+/** Offset 0x0869 - PanicVttDnLp Training
+ Enable/Disable PanicVttDnLp Training
+ $EN_DIS
+**/
+ UINT8 PVTTDNLP;
+
+/** Offset 0x086A - Read Vref Decap Training*
+ Enable/Disable Read Vref Decap Training*
+ $EN_DIS
+**/
+ UINT8 RDVREFDC;
+
+/** Offset 0x086B - Vddq Training
+ Enable/Disable Vddq Training
+ $EN_DIS
+**/
+ UINT8 VDDQT;
+
+/** Offset 0x086C - Rank Margin Tool Per Bit
+ Enable/Disable Rank Margin Tool Per Bit
+ $EN_DIS
+**/
+ UINT8 RMTBIT;
+
+/** Offset 0x086D - Reserved
+**/
+ UINT8 Reserved31[2];
+
+/** Offset 0x086F - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
+ Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
+ $EN_DIS
+**/
+ UINT8 Ddr4DdpSharedClock;
+
+/** Offset 0x0870 - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+ ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+ $EN_DIS
+**/
+ UINT8 Ddr4DdpSharedZq;
+
+/** Offset 0x0871 - Ch Hash Interleaved Bit
+ Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave
+ the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8
+ 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13
+**/
+ UINT8 ChHashInterleaveBit;
+
+/** Offset 0x0872 - Ch Hash Mask
+ Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to
+ BITS [19:6] Default is 0x30CC
+**/
+ UINT16 ChHashMask;
+
+/** Offset 0x0874 - Base reference clock value
+ Base reference clock value, in Hertz(Default is 100Hz)
+ 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz
+**/
+ UINT32 BClkFrequency;
+
+/** Offset 0x0878 - EPG DIMM Idd3N
+ Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on
+ a per DIMM basis. Default is 26
+**/
+ UINT16 Idd3n;
+
+/** Offset 0x087A - EPG DIMM Idd3P
+ Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated
+ on a per DIMM basis. Default is 11
+**/
+ UINT16 Idd3p;
+
+/** Offset 0x087C - CMD Normalization
+ Enable/Disable CMD Normalization
+ $EN_DIS
+**/
+ UINT8 CMDNORM;
+
+/** Offset 0x087D - Early DQ Write Drive Strength and Equalization Training
+ Enable/Disable Early DQ Write Drive Strength and Equalization Training
+ $EN_DIS
+**/
+ UINT8 EWRDSEQ;
+
+/** Offset 0x087E - Reserved
+**/
+ UINT8 Reserved32;
+
+/** Offset 0x087F - Idle Energy Mc0Ch0Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc0Ch0Dimm0;
+
+/** Offset 0x0880 - Idle Energy Mc0Ch0Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc0Ch0Dimm1;
+
+/** Offset 0x0881 - Idle Energy Mc0Ch1Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc0Ch1Dimm0;
+
+/** Offset 0x0882 - Idle Energy Mc0Ch1Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc0Ch1Dimm1;
+
+/** Offset 0x0883 - Idle Energy Mc1Ch0Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc1Ch0Dimm0;
+
+/** Offset 0x0884 - Idle Energy Mc1Ch0Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc1Ch0Dimm1;
+
+/** Offset 0x0885 - Idle Energy Mc1Ch1Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc1Ch1Dimm0;
+
+/** Offset 0x0886 - Idle Energy Mc1Ch1Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc1Ch1Dimm1;
+
+/** Offset 0x0887 - PowerDown Energy Mc0Ch0Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc0Ch0Dimm0;
+
+/** Offset 0x0888 - PowerDown Energy Mc0Ch0Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc0Ch0Dimm1;
+
+/** Offset 0x0889 - PowerDown Energy Mc0Ch1Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc0Ch1Dimm0;
+
+/** Offset 0x088A - PowerDown Energy Mc0Ch1Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc0Ch1Dimm1;
+
+/** Offset 0x088B - PowerDown Energy Mc1Ch0Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc1Ch0Dimm0;
+
+/** Offset 0x088C - PowerDown Energy Mc1Ch0Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc1Ch0Dimm1;
+
+/** Offset 0x088D - PowerDown Energy Mc1Ch1Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc1Ch1Dimm0;
+
+/** Offset 0x088E - PowerDown Energy Mc1Ch1Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc1Ch1Dimm1;
+
+/** Offset 0x088F - Activate Energy Mc0Ch0Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc0Ch0Dimm0;
+
+/** Offset 0x0890 - Activate Energy Mc0Ch0Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc0Ch0Dimm1;
+
+/** Offset 0x0891 - Activate Energy Mc0Ch1Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc0Ch1Dimm0;
+
+/** Offset 0x0892 - Activate Energy Mc0Ch1Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc0Ch1Dimm1;
+
+/** Offset 0x0893 - Activate Energy Mc1Ch0Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc1Ch0Dimm0;
+
+/** Offset 0x0894 - Activate Energy Mc1Ch0Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc1Ch0Dimm1;
+
+/** Offset 0x0895 - Activate Energy Mc1Ch1Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc1Ch1Dimm0;
+
+/** Offset 0x0896 - Activate Energy Mc1Ch1Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc1Ch1Dimm1;
+
+/** Offset 0x0897 - Read Energy Mc0Ch0Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc0Ch0Dimm0;
+
+/** Offset 0x0898 - Read Energy Mc0Ch0Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc0Ch0Dimm1;
+
+/** Offset 0x0899 - Read Energy Mc0Ch1Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc0Ch1Dimm0;
+
+/** Offset 0x089A - Read Energy Mc0Ch1Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc0Ch1Dimm1;
+
+/** Offset 0x089B - Read Energy Mc1Ch0Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc1Ch0Dimm0;
+
+/** Offset 0x089C - Read Energy Mc1Ch0Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc1Ch0Dimm1;
+
+/** Offset 0x089D - Read Energy Mc1Ch1Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc1Ch1Dimm0;
+
+/** Offset 0x089E - Read Energy Mc1Ch1Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc1Ch1Dimm1;
+
+/** Offset 0x089F - Write Energy Mc0Ch0Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc0Ch0Dimm0;
+
+/** Offset 0x08A0 - Write Energy Mc0Ch0Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc0Ch0Dimm1;
+
+/** Offset 0x08A1 - Write Energy Mc0Ch1Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc0Ch1Dimm0;
+
+/** Offset 0x08A2 - Write Energy Mc0Ch1Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc0Ch1Dimm1;
+
+/** Offset 0x08A3 - Write Energy Mc1Ch0Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc1Ch0Dimm0;
+
+/** Offset 0x08A4 - Write Energy Mc1Ch0Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc1Ch0Dimm1;
+
+/** Offset 0x08A5 - Write Energy Mc1Ch1Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc1Ch1Dimm0;
+
+/** Offset 0x08A6 - Write Energy Mc1Ch1Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc1Ch1Dimm1;
+
+/** Offset 0x08A7 - Throttler CKEMin Timer
+ Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4).
+ Dfault is 0x00
+**/
+ UINT8 ThrtCkeMinTmr;
+
+/** Offset 0x08A8 - Reserved
+**/
+ UINT8 Reserved33[2];
+
+/** Offset 0x08AA - Rapl Power Floor Ch0
+ Power budget ,range[255;0],(0= 5.3W Def)
+**/
+ UINT8 RaplPwrFlCh0;
+
+/** Offset 0x08AB - Rapl Power Floor Ch1
+ Power budget ,range[255;0],(0= 5.3W Def)
+**/
+ UINT8 RaplPwrFlCh1;
+
+/** Offset 0x08AC - Command Rate Support
+ CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs
+ 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS
+**/
+ UINT8 EnCmdRate;
+
+/** Offset 0x08AD - REFRESH_2X_MODE
+ 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot
+ 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only
+**/
+ UINT8 Refresh2X;
+
+/** Offset 0x08AE - Energy Performance Gain
+ Enable/disable(default) Energy Performance Gain.
+ $EN_DIS
+**/
+ UINT8 EpgEnable;
+
+/** Offset 0x08AF - Reserved
+**/
+ UINT8 Reserved34;
+
+/** Offset 0x08B0 - User Manual Threshold
+ Disabled: Predefined threshold will be used.\n
+ Enabled: User Input will be used.
+ $EN_DIS
+**/
+ UINT8 UserThresholdEnable;
+
+/** Offset 0x08B1 - User Manual Budget
+ Disabled: Configuration of memories will defined the Budget value.\n
+ Enabled: User Input will be used.
+ $EN_DIS
+**/
+ UINT8 UserBudgetEnable;
+
+/** Offset 0x08B2 - Power Down Mode
+ This option controls command bus tristating during idle periods
+ 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto
+**/
+ UINT8 PowerDownMode;
+
+/** Offset 0x08B3 - Pwr Down Idle Timer
+ The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means
+ AUTO: 64 for ULX/ULT, 128 for DT/Halo
+**/
+ UINT8 PwdwnIdleCounter;
+
+/** Offset 0x08B4 - Page Close Idle Timeout
+ This option controls Page Close Idle Timeout
+ 0:Enabled, 1:Disabled
+**/
+ UINT8 DisPgCloseIdleTimeout;
+
+/** Offset 0x08B5 - Bitmask of ranks that have CA bus terminated
+ Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default,
+ Rank0 is terminating and Rank1 is non-terminating</b>
+**/
+ UINT8 CmdRanksTerminated;
+
+/** Offset 0x08B6 - PcdSerialDebugLevel
+ Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
+ Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
+ Info & Verbose.
+ 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load
+ Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose
+**/
+ UINT8 PcdSerialDebugLevel;
+
+/** Offset 0x08B7 - Safe Mode Support
+ This option configures the varous items in the IO and MC to be more conservative.(def=Disable)
+ $EN_DIS
+**/
+ UINT8 SafeMode;
+
+/** Offset 0x08B8 - Ask MRC to clear memory content
+ Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory.
+ $EN_DIS
+**/
+ UINT8 CleanMemory;
+
+/** Offset 0x08B9 - LpDdrDqDqsReTraining
+ Enable/Disable TxDqDqs ReTraining for LP4/5 and DDR5
+ $EN_DIS
+**/
+ UINT8 LpDdrDqDqsReTraining;
+
+/** Offset 0x08BA - TCSS USB Port Enable
+ Bitmap for per port enabling
+**/
+ UINT8 UsbTcPortEnPreMem;
+
+/** Offset 0x08BB - Reserved
+**/
+ UINT8 Reserved35;
+
+/** Offset 0x08BC - Post Code Output Port
+ This option configures Post Code Output Port
+**/
+ UINT16 PostCodeOutputPort;
+
+/** Offset 0x08BE - RMTLoopCount
+ Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO
+**/
+ UINT8 RMTLoopCount;
+
+/** Offset 0x08BF - Enable/Disable SA CRID
+ Enable: SA CRID, Disable (Default): SA CRID
+ $EN_DIS
+**/
+ UINT8 CridEnable;
+
+/** Offset 0x08C0 - WRC Feature
+ Enable/Disable WRC (Write Cache) feature of IOP. When feature is enabled, supports
+ IO devices allocating onto the ring and into LLC. WRC is fused on by default.
+ $EN_DIS
+**/
+ UINT8 WrcFeatureEnable;
+
+/** Offset 0x08C1 - Reserved
+**/
+ UINT8 Reserved36[3];
+
+/** Offset 0x08C4 - BCLK RFI Frequency
+ Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No
+ RFI Tuning</b>. Range is 98Mhz-100Mhz.
+**/
+ UINT32 BclkRfiFreq[4];
+
+/** Offset 0x08D4 - Size of PCIe IMR.
+ Size of PCIe IMR in megabytes
+**/
+ UINT16 PcieImrSize;
+
+/** Offset 0x08D6 - Enable PCIe IMR
+ 0: Disable(AUTO), 1: Enable
+ $EN_DIS
+**/
+ UINT8 PcieImrEnabled;
+
+/** Offset 0x08D7 - Enable PCIe IMR
+ 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select
+ the Root port location from PCH PCIe or SA PCIe
+ $EN_DIS
+**/
+ UINT8 PcieImrRpLocation;
+
+/** Offset 0x08D8 - Root port number for IMR.
+ Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port
+ from 0 to 23 and if it is SA PCIe then select root port from 0 to 3
+**/
+ UINT8 PcieImrRpSelection;
+
+/** Offset 0x08D9 - SerialDebugMrcLevel
+ MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
+ Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
+ Info & Verbose.
+ 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load
+ Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose
+**/
+ UINT8 SerialDebugMrcLevel;
+
+/** Offset 0x08DA - Ddr4OneDpc
+ DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only,
+ or on both (default)
+ 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled
+**/
+ UINT8 Ddr4OneDpc;
+
+/** Offset 0x08DB - Reserved
+**/
+ UINT8 Reserved37[3];
+
+/** Offset 0x08DE - REFRESH_PANIC_WM
+ DEPRECATED
+**/
+ UINT8 RefreshPanicWm;
+
+/** Offset 0x08DF - REFRESH_HP_WM
+ DEPRECATED
+**/
+ UINT8 RefreshHpWm;
+
+/** Offset 0x08E0 - Command Pins Mapping
+ BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller
+ 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending.
+**/
+ UINT8 Lp5CccConfig;
+
+/** Offset 0x08E1 - Command Pins Mirrored
+ BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller
+ 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror.
+**/
+ UINT8 CmdMirror;
+
+/** Offset 0x08E2 - Reserved
+**/
+ UINT8 Reserved38[9];
+
+/** Offset 0x08EB - Skip external display device scanning
+ Enable: Do not scan for external display device, Disable (Default): Scan external
+ display devices
+ $EN_DIS
+**/
+ UINT8 SkipExtGfxScan;
+
+/** Offset 0x08EC - Generate BIOS Data ACPI Table
+ Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it
+ $EN_DIS
+**/
+ UINT8 BdatEnable;
+
+/** Offset 0x08ED - Lock PCU Thermal Management registers
+ Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0
+ $EN_DIS
+**/
+ UINT8 LockPTMregs;
+
+/** Offset 0x08EE - Reserved
+**/
+ UINT8 Reserved39;
+
+/** Offset 0x08EF - Panel Power Enable
+ Control for enabling/disabling VDD force bit (Required only for early enabling of
+ eDP panel). 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 PanelPowerEnable;
+
+/** Offset 0x08F0 - BdatTestType
+ Indicates the type of Memory Training data to populate into the BDAT ACPI table.
+ 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D
+**/
+ UINT8 BdatTestType;
+
+/** Offset 0x08F1 - Reserved
+**/
+ UINT8 Reserved40[3];
+
+/** Offset 0x08F4 - PMR Size
+ Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot
+**/
+ UINT32 DmaBufferSize;
+
+/** Offset 0x08F8 - VT-d/IOMMU Boot Policy
+ BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS
+**/
+ UINT8 PreBootDmaMask;
+
+/** Offset 0x08F9 - Reserved
+**/
+ UINT8 Reserved41[95];
+
+/** Offset 0x0958 - TotalFlashSize
+ Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable
+**/
+ UINT16 TotalFlashSize;
+
+/** Offset 0x095A - BiosSize
+ The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard !=
+ 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected
+ Range) so that a BIOS Update Script can be stored in the DPR.
+**/
+ UINT16 BiosSize;
+
+/** Offset 0x095C - Reserved
+**/
+ UINT8 Reserved42[12];
+
+/** Offset 0x0968 - Smbus dynamic power gating
+ Disable or Enable Smbus dynamic power gating.
+ $EN_DIS
+**/
+ UINT8 SmbusDynamicPowerGating;
+
+/** Offset 0x0969 - Disable and Lock Watch Dog Register
+ Set 1 to clear WDT status, then disable and lock WDT registers.
+ $EN_DIS
+**/
+ UINT8 WdtDisableAndLock;
+
+/** Offset 0x096A - SMBUS SPD Write Disable
+ Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write
+ Disable bit. For security recommendations, SPD write disable bit must be set.
+ $EN_DIS
+**/
+ UINT8 SmbusSpdWriteDisable;
+
+/** Offset 0x096B - Force ME DID Init Status
+ Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set
+ ME DID init stat value
+ $EN_DIS
+**/
+ UINT8 DidInitStat;
+
+/** Offset 0x096C - CPU Replaced Polling Disable
+ Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop
+ $EN_DIS
+**/
+ UINT8 DisableCpuReplacedPolling;
+
+/** Offset 0x096D - Check HECI message before send
+ Test, 0: disable, 1: enable, Enable/Disable message check.
+ $EN_DIS
+**/
+ UINT8 DisableMessageCheck;
+
+/** Offset 0x096E - Skip MBP HOB
+ Test, 0: disable, 1: enable, Enable/Disable MOB HOB.
+ $EN_DIS
+**/
+ UINT8 SkipMbpHob;
+
+/** Offset 0x096F - HECI2 Interface Communication
+ Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space.
+ $EN_DIS
+**/
+ UINT8 HeciCommunication2;
+
+/** Offset 0x0970 - Enable KT device
+ Test, 0: disable, 1: enable, Enable or Disable KT device.
+ $EN_DIS
+**/
+ UINT8 KtDeviceEnable;
+
+/** Offset 0x0971 - Skip CPU replacement check
+ Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check
+ $EN_DIS
+**/
+ UINT8 SkipCpuReplacementCheck;
+
+/** Offset 0x0972 - Reserved
+**/
+ UINT8 Reserved43[2];
+
+/** Offset 0x0974 - Hybrid Graphics GPIO information for PEG 1
+ Hybrid Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs
+**/
+ UINT32 CpuPcie1Rtd3Gpio[24];
+
+/** Offset 0x09D4 - Hybrid Graphics GPIO information for PEG 2
+ Hybrid Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs
+**/
+ UINT32 CpuPcie2Rtd3Gpio[24];
+
+/** Offset 0x0A34 - Hybrid Graphics GPIO information for PEG 3
+ Hybrid Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs
+**/
+ UINT32 CpuPcie3Rtd3Gpio[24];
+
+/** Offset 0x0A94 - Avx2 Voltage Guardband Scaling Factor
+ AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in
+ 1/100 units, where a value of 125 would apply a 1.25 scale factor.
+**/
+ UINT8 Avx2VoltageScaleFactor;
+
+/** Offset 0x0A95 - Avx512 Voltage Guardband Scaling Factor
+ DEPRECATED
+**/
+ UINT8 Avx512VoltageScaleFactor;
+
+/** Offset 0x0A96 - Serial Io Uart Debug Mode
+ Select SerialIo Uart Controller mode
+ 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
+ 4:SerialIoUartSkipInit
+**/
+ UINT8 SerialIoUartDebugMode;
+
+/** Offset 0x0A97 - Reserved
+**/
+ UINT8 Reserved44;
+
+/** Offset 0x0A98 - SerialIoUartDebugRxPinMux - FSPT
+ Select RX pin muxing for SerialIo UART used for debug
+**/
+ UINT32 SerialIoUartDebugRxPinMux;
+
+/** Offset 0x0A9C - SerialIoUartDebugTxPinMux - FSPM
+ Select TX pin muxing for SerialIo UART used for debug
+**/
+ UINT32 SerialIoUartDebugTxPinMux;
+
+/** Offset 0x0AA0 - SerialIoUartDebugRtsPinMux - FSPM
+ Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
+ for possible values.
+**/
+ UINT32 SerialIoUartDebugRtsPinMux;
+
+/** Offset 0x0AA4 - SerialIoUartDebugCtsPinMux - FSPM
+ Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
+ for possible values.
+**/
+ UINT32 SerialIoUartDebugCtsPinMux;
+
+/** Offset 0x0AA8 - Reserved
+**/
+ UINT8 Reserved45[130];
+
+/** Offset 0x0B2A - LP5 Bank Mode
+ LP5 Bank Mode. 0: Auto, 1: 8 Bank Mode, 2: 16 Bank Mode, 3: BG Mode, default is 0
+ 0:Auto, 1:8 Bank Mode, 2:16 Bank Mode, 3:BG Mode
+**/
+ UINT8 Lp5BankMode;
+
+/** Offset 0x0B2B - Reserved
+**/
+ UINT8 Reserved46[13];
+} FSP_M_CONFIG;
+
+/** Fsp M UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+ FSP_UPD_HEADER FspUpdHeader;
+
+/** Offset 0x0020
+**/
+ FSPM_ARCH_UPD FspmArchUpd;
+
+/** Offset 0x0040
+**/
+ FSP_M_CONFIG FspmConfig;
+
+/** Offset 0x0B38
+**/
+ UINT8 UnusedUpdSpace33[6];
+
+/** Offset 0x0B3E
+**/
+ UINT16 UpdTerminator;
+} FSPM_UPD;
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/twinlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/twinlake/FspsUpd.h
new file mode 100644
index 000000000000..d82c9f93c377
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/twinlake/FspsUpd.h
@@ -0,0 +1,3975 @@
+/** @file
+
+Copyright (c) 2022 - 2024, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPSUPD_H__
+#define __FSPSUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+
+///
+/// Azalia Header structure
+///
+typedef struct {
+ UINT16 VendorId; ///< Codec Vendor ID
+ UINT16 DeviceId; ///< Codec Device ID
+ UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision.
+ UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI.
+ UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer.
+ UINT32 Reserved; ///< Reserved for future use. Must be set to 0.
+} AZALIA_HEADER;
+
+///
+/// Audio Azalia Verb Table structure
+///
+typedef struct {
+ AZALIA_HEADER Header; ///< AZALIA PCH header
+ UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header
+} AUDIO_AZALIA_VERB_TABLE;
+
+///
+/// Refer to the definition of PCH_INT_PIN
+///
+typedef enum {
+ SiPchNoInt, ///< No Interrupt Pin
+ SiPchIntA,
+ SiPchIntB,
+ SiPchIntC,
+ SiPchIntD
+} SI_PCH_INT_PIN;
+///
+/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device.
+///
+typedef struct {
+ UINT8 Device; ///< Device number
+ UINT8 Function; ///< Device function
+ UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN)
+ UINT8 Irq; ///< IRQ to be set for device.
+} SI_PCH_DEVICE_INTERRUPT_CONFIG;
+
+#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices
+
+
+/** Fsp S Configuration
+**/
+typedef struct {
+
+/** Offset 0x0040 - Logo Pointer
+ Points to PEI Display Logo Image
+**/
+ UINT32 LogoPtr;
+
+/** Offset 0x0044 - Logo Size
+ Size of PEI Display Logo Image
+**/
+ UINT32 LogoSize;
+
+/** Offset 0x0048 - Blt Buffer Address
+ Address of Blt buffer
+**/
+ UINT32 BltBufferAddress;
+
+/** Offset 0x004C - Blt Buffer Size
+ Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+**/
+ UINT32 BltBufferSize;
+
+/** Offset 0x0050 - Graphics Configuration Ptr
+ Points to VBT
+**/
+ UINT32 GraphicsConfigPtr;
+
+/** Offset 0x0054 - Enable Device 4
+ Enable/disable Device 4
+ $EN_DIS
+**/
+ UINT8 Device4Enable;
+
+/** Offset 0x0055 - Show SPI controller
+ Enable/disable to show SPI controller.
+ $EN_DIS
+**/
+ UINT8 ShowSpiController;
+
+/** Offset 0x0056 - Reserved
+**/
+ UINT8 Reserved0[2];
+
+/** Offset 0x0058 - MicrocodeRegionBase
+ Memory Base of Microcode Updates
+**/
+ UINT32 MicrocodeRegionBase;
+
+/** Offset 0x005C - MicrocodeRegionSize
+ Size of Microcode Updates
+**/
+ UINT32 MicrocodeRegionSize;
+
+/** Offset 0x0060 - Turbo Mode
+ Enable/Disable Turbo mode. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 TurboMode;
+
+/** Offset 0x0061 - Enable SATA SALP Support
+ Enable/disable SATA Aggressive Link Power Management.
+ $EN_DIS
+**/
+ UINT8 SataSalpSupport;
+
+/** Offset 0x0062 - Enable SATA ports
+ Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1,
+ and so on.
+**/
+ UINT8 SataPortsEnable[8];
+
+/** Offset 0x006A - Enable SATA DEVSLP Feature
+ Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each
+ port, byte0 for port0, byte1 for port1, and so on.
+**/
+ UINT8 SataPortsDevSlp[8];
+
+/** Offset 0x0072 - Reserved
+**/
+ UINT8 Reserved1[34];
+
+/** Offset 0x0094 - Enable USB2 ports
+ Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb20Enable[16];
+
+/** Offset 0x00A4 - Enable USB3 ports
+ Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb30Enable[10];
+
+/** Offset 0x00AE - Enable xDCI controller
+ Enable/disable to xDCI controller.
+ $EN_DIS
+**/
+ UINT8 XdciEnable;
+
+/** Offset 0x00AF - Reserved
+**/
+ UINT8 Reserved2;
+
+/** Offset 0x00B0 - Address of PCH_DEVICE_INTERRUPT_CONFIG table.
+ The address of the table of PCH_DEVICE_INTERRUPT_CONFIG.
+**/
+ UINT32 DevIntConfigPtr;
+
+/** Offset 0x00B4 - Number of DevIntConfig Entry
+ Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr
+ must not be NULL.
+**/
+ UINT8 NumOfDevIntConfig;
+
+/** Offset 0x00B5 - PIRQx to IRQx Map Config
+ PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for
+ PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy
+ 8259 PCI mode.
+**/
+ UINT8 PxRcConfig[8];
+
+/** Offset 0x00BD - Select GPIO IRQ Route
+ GPIO IRQ Select. The valid value is 14 or 15.
+**/
+ UINT8 GpioIrqRoute;
+
+/** Offset 0x00BE - Select SciIrqSelect
+ SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only.
+**/
+ UINT8 SciIrqSelect;
+
+/** Offset 0x00BF - Select TcoIrqSelect
+ TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23.
+**/
+ UINT8 TcoIrqSelect;
+
+/** Offset 0x00C0 - Enable/Disable Tco IRQ
+ Enable/disable TCO IRQ
+ $EN_DIS
+**/
+ UINT8 TcoIrqEnable;
+
+/** Offset 0x00C1 - PCH HDA Verb Table Entry Number
+ Number of Entries in Verb Table.
+**/
+ UINT8 PchHdaVerbTableEntryNum;
+
+/** Offset 0x00C2 - Reserved
+**/
+ UINT8 Reserved3[2];
+
+/** Offset 0x00C4 - PCH HDA Verb Table Pointer
+ Pointer to Array of pointers to Verb Table.
+**/
+ UINT32 PchHdaVerbTablePtr;
+
+/** Offset 0x00C8 - PCH HDA Codec Sx Wake Capability
+ Capability to detect wake initiated by a codec in Sx
+**/
+ UINT8 PchHdaCodecSxWakeCapability;
+
+/** Offset 0x00C9 - Enable SATA
+ Enable/disable SATA controller.
+ $EN_DIS
+**/
+ UINT8 SataEnable;
+
+/** Offset 0x00CA - SATA Mode
+ Select SATA controller working mode.
+ 0:AHCI, 1:RAID
+**/
+ UINT8 SataMode;
+
+/** Offset 0x00CB - SPIn Device Mode
+ Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available
+ modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden
+**/
+ UINT8 SerialIoSpiMode[7];
+
+/** Offset 0x00D2 - SPI<N> Chip Select Polarity
+ Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow,
+ 1:SerialIoSpiCsActiveHigh
+**/
+ UINT8 SerialIoSpiCsPolarity[14];
+
+/** Offset 0x00E0 - SPI<N> Chip Select Enable
+ 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled
+**/
+ UINT8 SerialIoSpiCsEnable[14];
+
+/** Offset 0x00EE - SPIn Default Chip Select Output
+ Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available
+ options: 0:CS0, 1:CS1
+**/
+ UINT8 SerialIoSpiDefaultCsOutput[7];
+
+/** Offset 0x00F5 - SPIn Default Chip Select Mode HW/SW
+ Sets Default CS Mode Hardware or Software. N represents controller index: SPI0,
+ SPI1, ... Available options: 0:HW, 1:SW
+**/
+ UINT8 SerialIoSpiCsMode[7];
+
+/** Offset 0x00FC - SPIn Default Chip Select State Low/High
+ Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ...
+ Available options: 0:Low, 1:High
+**/
+ UINT8 SerialIoSpiCsState[7];
+
+/** Offset 0x0103 - UARTn Device Mode
+ Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available
+ modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
+ 4:SerialIoUartSkipInit
+**/
+ UINT8 SerialIoUartMode[7];
+
+/** Offset 0x010A - Reserved
+**/
+ UINT8 Reserved4[2];
+
+/** Offset 0x010C - Default BaudRate for each Serial IO UART
+ Set default BaudRate Supported from 0 - default to 6000000
+**/
+ UINT32 SerialIoUartBaudRate[7];
+
+/** Offset 0x0128 - Default ParityType for each Serial IO UART
+ Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 SerialIoUartParity[7];
+
+/** Offset 0x012F - Default DataBits for each Serial IO UART
+ Set default word length. 0: Default, 5,6,7,8
+**/
+ UINT8 SerialIoUartDataBits[7];
+
+/** Offset 0x0136 - Default StopBits for each Serial IO UART
+ Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3:
+ TwoStopBits
+**/
+ UINT8 SerialIoUartStopBits[7];
+
+/** Offset 0x013D - Power Gating mode for each Serial IO UART that works in COM mode
+ Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto
+**/
+ UINT8 SerialIoUartPowerGating[7];
+
+/** Offset 0x0144 - Enable Dma for each Serial IO UART that supports it
+ Set DMA/PIO mode. 0: Disabled, 1: Enabled
+**/
+ UINT8 SerialIoUartDmaEnable[7];
+
+/** Offset 0x014B - Enables UART hardware flow control, CTS and RTS lines
+ Enables UART hardware flow control, CTS and RTS lines.
+**/
+ UINT8 SerialIoUartAutoFlow[7];
+
+/** Offset 0x0152 - Reserved
+**/
+ UINT8 Reserved5[2];
+
+/** Offset 0x0154 - SerialIoUartRtsPinMuxPolicy
+ Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
+ for possible values.
+**/
+ UINT32 SerialIoUartRtsPinMuxPolicy[7];
+
+/** Offset 0x0170 - SerialIoUartCtsPinMuxPolicy
+ Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
+ for possible values.
+**/
+ UINT32 SerialIoUartCtsPinMuxPolicy[7];
+
+/** Offset 0x018C - SerialIoUartRxPinMuxPolicy
+ Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for
+ possible values.
+**/
+ UINT32 SerialIoUartRxPinMuxPolicy[7];
+
+/** Offset 0x01A8 - SerialIoUartTxPinMuxPolicy
+ Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for
+ possible values.
+**/
+ UINT32 SerialIoUartTxPinMuxPolicy[7];
+
+/** Offset 0x01C4 - UART Number For Debug Purpose
+ UART number for debug purpose. 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5,
+ 6:UART6. Note: If UART0 is selected as CNVi BT Core interface, it cannot be used
+ for debug purpose.
+ 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, 6:UART6
+**/
+ UINT8 SerialIoDebugUartNumber;
+
+/** Offset 0x01C5 - Serial IO UART DBG2 table
+ Enable or disable Serial Io UART DBG2 table, default is Disable; <b>0: Disable;</b>
+ 1: Enable.
+**/
+ UINT8 SerialIoUartDbg2[7];
+
+/** Offset 0x01CC - I2Cn Device Mode
+ Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available
+ modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden
+**/
+ UINT8 SerialIoI2cMode[8];
+
+/** Offset 0x01D4 - Serial IO I2C SDA Pin Muxing
+ Select SerialIo I2c Sda pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SDA* for
+ possible values.
+**/
+ UINT32 PchSerialIoI2cSdaPinMux[8];
+
+/** Offset 0x01F4 - Serial IO I2C SCL Pin Muxing
+ Select SerialIo I2c Scl pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SCL* for
+ possible values.
+**/
+ UINT32 PchSerialIoI2cSclPinMux[8];
+
+/** Offset 0x0214 - PCH SerialIo I2C Pads Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination
+ respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on.
+**/
+ UINT8 PchSerialIoI2cPadsTermination[8];
+
+/** Offset 0x021C - ISH GP GPIO Pin Muxing
+ Determines ISH GP GPIO Pin muxing. See GPIO_*_MUXING_ISH_GP_x_GPIO_*. 'x' are GP_NUMBER
+**/
+ UINT32 IshGpGpioPinMuxing[8];
+
+/** Offset 0x023C - ISH UART Rx Pin Muxing
+ Determines ISH UART Rx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_TXD_*
+**/
+ UINT32 IshUartRxPinMuxing[3];
+
+/** Offset 0x0248 - ISH UART Tx Pin Muxing
+ Determines ISH UART Tx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_RXD_*
+**/
+ UINT32 IshUartTxPinMuxing[3];
+
+/** Offset 0x0254 - ISH UART Rts Pin Muxing
+ Select ISH UART Rts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_RTS_* for possible values.
+**/
+ UINT32 IshUartRtsPinMuxing[3];
+
+/** Offset 0x0260 - ISH UART Rts Pin Muxing
+ Select ISH UART Cts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_CTS_* for possible values.
+**/
+ UINT32 IshUartCtsPinMuxing[3];
+
+/** Offset 0x026C - ISH I2C SDA Pin Muxing
+ Select ISH I2C SDA Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SDA_* for possible values.
+**/
+ UINT32 IshI2cSdaPinMuxing[3];
+
+/** Offset 0x0278 - ISH I2C SCL Pin Muxing
+ Select ISH I2C SCL Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SCL_* for possible values.
+**/
+ UINT32 IshI2cSclPinMuxing[3];
+
+/** Offset 0x0284 - ISH SPI MOSI Pin Muxing
+ Select ISH SPI MOSI Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MOSI_* for possible values.
+**/
+ UINT32 IshSpiMosiPinMuxing[2];
+
+/** Offset 0x028C - ISH SPI MISO Pin Muxing
+ Select ISH SPI MISO Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MISO_* for possible values.
+**/
+ UINT32 IshSpiMisoPinMuxing[2];
+
+/** Offset 0x0294 - ISH SPI CLK Pin Muxing
+ Select ISH SPI CLK Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CLK_* for possible values.
+**/
+ UINT32 IshSpiClkPinMuxing[2];
+
+/** Offset 0x029C - ISH SPI CS#N Pin Muxing
+ Select ISH SPI CS#N Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CS<N>_* for possible
+ values. N-SPI number, 0-1.
+**/
+ UINT32 IshSpiCsPinMuxing[4];
+
+/** Offset 0x02AC - ISH GP GPIO Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo GP#N GPIO pads termination
+ respectively. #N are GP_NUMBER, not strictly relate to indexes of this table. Index
+ 0-23 -> ISH_GP_0-23, Index 24-25 -> ISH_GP_30-31
+**/
+ UINT8 IshGpGpioPadTermination[8];
+
+/** Offset 0x02B4 - ISH UART Rx Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rx pads termination
+ respectively. #N-byte for each controller, byte0 for UART0 Rx, byte1 for UART1
+ Rx, and so on.
+**/
+ UINT8 IshUartRxPadTermination[3];
+
+/** Offset 0x02B7 - ISH UART Tx Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Tx pads termination
+ respectively. #N-byte for each controller, byte0 for UART0 Tx, byte1 for UART1
+ Tx, and so on.
+**/
+ UINT8 IshUartTxPadTermination[3];
+
+/** Offset 0x02BA - ISH UART Rts Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rts pads termination
+ respectively. #N-byte for each controller, byte0 for UART0 Rts, byte1 for UART1
+ Rts, and so on.
+**/
+ UINT8 IshUartRtsPadTermination[3];
+
+/** Offset 0x02BD - ISH UART Rts Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Cts pads termination
+ respectively. #N-byte for each controller, byte0 for UART0 Cts, byte1 for UART1
+ Cts, and so on.
+**/
+ UINT8 IshUartCtsPadTermination[3];
+
+/** Offset 0x02C0 - ISH I2C SDA Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Sda pads termination
+ respectively. #N-byte for each controller, byte0 for I2C0 Sda, byte1 for I2C1 Sda,
+ and so on.
+**/
+ UINT8 IshI2cSdaPadTermination[3];
+
+/** Offset 0x02C3 - ISH I2C SCL Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Scl pads termination
+ respectively. #N-byte for each controller, byte0 for I2C0 Scl, byte1 for I2C1 Scl,
+ and so on.
+**/
+ UINT8 IshI2cSclPadTermination[3];
+
+/** Offset 0x02C6 - ISH SPI MOSI Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Mosi pads termination
+ respectively. #N-byte for each controller, byte0 for SPI0 Mosi, byte1 for SPI1
+ Mosi, and so on.
+**/
+ UINT8 IshSpiMosiPadTermination[2];
+
+/** Offset 0x02C8 - ISH SPI MISO Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Miso pads termination
+ respectively. #N-byte for each controller, byte0 for SPI0 Miso, byte1 for SPI1
+ Miso, and so on.
+**/
+ UINT8 IshSpiMisoPadTermination[2];
+
+/** Offset 0x02CA - ISH SPI CLK Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Clk pads termination
+ respectively. #N-byte for each controller, byte0 for SPI0 Clk, byte1 for SPI1 Clk,
+ and so on.
+**/
+ UINT8 IshSpiClkPadTermination[2];
+
+/** Offset 0x02CC - ISH SPI CS#N Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Cs#M pads termination
+ respectively. N*M-byte for each controller, byte0 for SPI0 Cs0, byte1 for SPI1
+ Cs1, SPI1 Cs0, byte2, SPI1 Cs1, byte3
+**/
+ UINT8 IshSpiCsPadTermination[4];
+
+/** Offset 0x02D0 - Enable PCH ISH SPI Cs#N pins assigned
+ Set if ISH SPI Cs#N pins are to be enabled by BIOS. 0: Disable; 1: Enable. N-Cs
+ number: 0-1
+**/
+ UINT8 PchIshSpiCsEnable[4];
+
+/** Offset 0x02D4 - USB Per Port HS Preemphasis Bias
+ USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port.
+**/
+ UINT8 Usb2PhyPetxiset[16];
+
+/** Offset 0x02E4 - USB Per Port HS Transmitter Bias
+ USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port.
+**/
+ UINT8 Usb2PhyTxiset[16];
+
+/** Offset 0x02F4 - USB Per Port HS Transmitter Emphasis
+ USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON,
+ 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port.
+**/
+ UINT8 Usb2PhyPredeemp[16];
+
+/** Offset 0x0304 - USB Per Port Half Bit Pre-emphasis
+ USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis.
+ One byte for each port.
+**/
+ UINT8 Usb2PhyPehalfbit[16];
+
+/** Offset 0x0314 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment
+ Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmphEnable[10];
+
+/** Offset 0x031E - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting
+ USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16],
+ <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmph[10];
+
+/** Offset 0x0328 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment
+ Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmpEnable[10];
+
+/** Offset 0x0332 - USB 3.0 TX Output Downscale Amplitude Adjustment
+ USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default
+ = 00h</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmp[10];
+
+/** Offset 0x033C
+**/
+ UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10];
+
+/** Offset 0x0346
+**/
+ UINT8 PchUsb3HsioFilterSelNEnable[10];
+
+/** Offset 0x0350
+**/
+ UINT8 PchUsb3HsioFilterSelPEnable[10];
+
+/** Offset 0x035A
+**/
+ UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10];
+
+/** Offset 0x0364
+**/
+ UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10];
+
+/** Offset 0x036E
+**/
+ UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10];
+
+/** Offset 0x0378
+**/
+ UINT8 PchUsb3HsioFilterSelN[10];
+
+/** Offset 0x0382
+**/
+ UINT8 PchUsb3HsioFilterSelP[10];
+
+/** Offset 0x038C - Enable LAN
+ Enable/disable LAN controller.
+ $EN_DIS
+**/
+ UINT8 PchLanEnable;
+
+/** Offset 0x038D - Enable PCH TSN
+ Enable/disable TSN on the PCH.
+ $EN_DIS
+**/
+ UINT8 PchTsnEnable;
+
+/** Offset 0x038E - TSN Link Speed
+ Set TSN Link Speed.
+ 0: 24Mhz 2.5Gbps, 1: 24Mhz 1Gbps, 2: 38.4Mhz 2.5Gbps, 3: 38.4Mhz 1Gbps
+**/
+ UINT8 PchTsnLinkSpeed;
+
+/** Offset 0x038F - Reserved
+**/
+ UINT8 Reserved6[9];
+
+/** Offset 0x0398 - PCIe PTM enable/disable
+ Enable/disable Precision Time Measurement for PCIE Root Ports.
+**/
+ UINT8 PciePtm[28];
+
+/** Offset 0x03B4 - PCIe DPC enable/disable
+ Enable/disable Downstream Port Containment for PCIE Root Ports.
+**/
+ UINT8 PcieDpc[28];
+
+/** Offset 0x03D0 - PCIe DPC extensions enable/disable
+ Enable/disable Downstream Port Containment Extensions for PCIE Root Ports.
+**/
+ UINT8 PcieEdpc[28];
+
+/** Offset 0x03EC - USB PDO Programming
+ Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming
+ during later phase. 1: enable, 0: disable
+ $EN_DIS
+**/
+ UINT8 UsbPdoProgramming;
+
+/** Offset 0x03ED - Reserved
+**/
+ UINT8 Reserved7[3];
+
+/** Offset 0x03F0 - Power button debounce configuration
+ Debounce time for PWRBTN in microseconds. For values not supported by HW, they will
+ be rounded down to closest supported on. 0: disable, 250-1024000us: supported range
+**/
+ UINT32 PmcPowerButtonDebounce;
+
+/** Offset 0x03F4 - PCH eSPI Host and Device BME enabled
+ PCH eSPI Host and Device BME enabled
+ $EN_DIS
+**/
+ UINT8 PchEspiBmeMasterSlaveEnabled;
+
+/** Offset 0x03F5 - PCH eSPI Link Configuration Lock (SBLCL)
+ Enable/Disable lock of communication through SET_CONFIG/GET_CONFIG to eSPI slaves
+ addresseses from range 0x0 - 0x7FF
+ $EN_DIS
+**/
+ UINT8 PchEspiLockLinkConfiguration;
+
+/** Offset 0x03F6 - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states
+ Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT4:S5, BIT5:S0
+**/
+ UINT8 PchFivrExtV1p05RailEnabledStates;
+
+/** Offset 0x03F7 - Mask to enable the platform configuration of external V1p05 VR rail
+ External V1P05 Rail Supported Configuration
+**/
+ UINT8 PchFivrExtV1p05RailSupportedVoltageStates;
+
+/** Offset 0x03F8 - External V1P05 Voltage Value that will be used in S0i2/S0i3 states
+ Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
+**/
+ UINT16 PchFivrExtV1p05RailVoltage;
+
+/** Offset 0x03FA - External V1P05 Icc Max Value
+ Granularity of this setting is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtV1p05RailIccMax;
+
+/** Offset 0x03FB - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states
+ Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5
+**/
+ UINT8 PchFivrExtVnnRailEnabledStates;
+
+/** Offset 0x03FC - Mask to enable the platform configuration of external Vnn VR rail
+ External Vnn Rail Supported Configuration
+**/
+ UINT8 PchFivrExtVnnRailSupportedVoltageStates;
+
+/** Offset 0x03FD - Reserved
+**/
+ UINT8 Reserved8;
+
+/** Offset 0x03FE - External Vnn Voltage Value that will be used in S0ix/Sx states
+ Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...), Default is set to 420
+**/
+ UINT16 PchFivrExtVnnRailVoltage;
+
+/** Offset 0x0400 - External Vnn Icc Max Value that will be used in S0ix/Sx states
+ Granularity of this setting is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtVnnRailIccMax;
+
+/** Offset 0x0401 - Mask to enable the usage of external Vnn VR rail in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in
+ Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT4:S5, BIT5:S0
+**/
+ UINT8 PchFivrExtVnnRailSxEnabledStates;
+
+/** Offset 0x0402 - External Vnn Voltage Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments
+ (0=0mV, 1=2.5mV, 2=5mV...)
+**/
+ UINT16 PchFivrExtVnnRailSxVoltage;
+
+/** Offset 0x0404 - External Vnn Icc Max Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting
+ is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtVnnRailSxIccMax;
+
+/** Offset 0x0405 - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage
+ This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
+ to low current mode voltage.
+**/
+ UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime;
+
+/** Offset 0x0406 - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage
+ This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
+ to retention mode voltage.
+**/
+ UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime;
+
+/** Offset 0x0407 - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage
+ This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
+ to retention mode voltage.
+**/
+ UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime;
+
+/** Offset 0x0408 - Transition time in microseconds from Off (0V) to High Current Mode Voltage
+ This field has 1us resolution. When value is 0 Transition to 0V is disabled.
+**/
+ UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime;
+
+/** Offset 0x040A - PMC Debug Message Enable
+ When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW
+ will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix
+ $EN_DIS
+**/
+ UINT8 PmcDbgMsgEn;
+
+/** Offset 0x040B - Reserved
+**/
+ UINT8 Reserved9;
+
+/** Offset 0x040C - Pointer of ChipsetInit Binary
+ ChipsetInit Binary Pointer.
+**/
+ UINT32 ChipsetInitBinPtr;
+
+/** Offset 0x0410 - Length of ChipsetInit Binary
+ ChipsetInit Binary Length.
+**/
+ UINT32 ChipsetInitBinLen;
+
+/** Offset 0x0414 - FIVR Dynamic Power Management
+ Enable/Disable FIVR Dynamic Power Management.
+ $EN_DIS
+**/
+ UINT8 PchFivrDynPm;
+
+/** Offset 0x0415 - FIVR VCCST ICCMax Control
+ Enable/Disable FIVR VCCST ICCMax Control.
+ $EN_DIS
+**/
+ UINT8 PchFivrVccstIccMaxControl;
+
+/** Offset 0x0416 - External V1P05 Icc Max Value
+ Granularity of this setting is 1mA and maximal possible value is 500mA
+**/
+ UINT16 PchFivrExtV1p05RailIccMaximum;
+
+/** Offset 0x0418 - External Vnn Icc Max Value that will be used in S0ix/Sx states
+ Granularity of this setting is 1mA and maximal possible value is 500mA
+**/
+ UINT16 PchFivrExtVnnRailIccMaximum;
+
+/** Offset 0x041A - External Vnn Icc Max Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting
+ is 1mA and maximal possible value is 500mA
+**/
+ UINT16 PchFivrExtVnnRailSxIccMaximum;
+
+/** Offset 0x041C - Extented BIOS Direct Read Decode enable
+ Enable/Disable access to bigger than 16MB BIOS Region through Direct Memory Reads.
+ 0: disabled (default), 1: enabled
+ $EN_DIS
+**/
+ UINT8 PchSpiExtendedBiosDecodeRangeEnable;
+
+/** Offset 0x041D - Reserved
+**/
+ UINT8 Reserved10[3];
+
+/** Offset 0x0420 - Extended BIOS Direct Read Decode Range base
+ Bits of 31:16 of a memory address that'll be a base for Extended BIOS Direct Read Decode.
+**/
+ UINT32 PchSpiExtendedBiosDecodeRangeBase;
+
+/** Offset 0x0424 - Extended BIOS Direct Read Decode Range limit
+ Bits of 31:16 of a memory address that'll be a limit for Extended BIOS Direct Read Decode.
+**/
+ UINT32 PchSpiExtendedBiosDecodeRangeLimit;
+
+/** Offset 0x0428 - Reserved
+**/
+ UINT8 Reserved11[12];
+
+/** Offset 0x0434 - CNVi Configuration
+ This option allows for automatic detection of Connectivity Solution. [Auto Detection]
+ assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi.
+ 0:Disable, 1:Auto
+**/
+ UINT8 CnviMode;
+
+/** Offset 0x0435 - Reserved
+**/
+ UINT8 Reserved12;
+
+/** Offset 0x0436 - CNVi BT Core
+ Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE
+ $EN_DIS
+**/
+ UINT8 CnviBtCore;
+
+/** Offset 0x0437 - CNVi BT Audio Offload
+ Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE
+ $EN_DIS
+**/
+ UINT8 CnviBtAudioOffload;
+
+/** Offset 0x0438 - CNVi RF_RESET pin muxing
+ Select CNVi RF_RESET# pin depending on board routing. ADP-P/M: GPP_A8 = 0x2942E408(default)
+ or GPP_F4 = 0x194CE404. ADP-S: 0. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h.
+**/
+ UINT32 CnviRfResetPinMux;
+
+/** Offset 0x043C - CNVi CLKREQ pin muxing
+ Select CNVi CLKREQ pin depending on board routing. ADP-P/M: GPP_A9 = 0x3942E609(default)
+ or GPP_F5 = 0x394CE605. ADP-S: 0. Refer to GPIO_*_MUXING_CNVI_CRF_XTAL_CLKREQ_*
+ in GpioPins*.h.
+**/
+ UINT32 CnviClkreqPinMux;
+
+/** Offset 0x0440 - Enable Host C10 reporting through eSPI
+ Enable/disable Host C10 reporting to Device via eSPI Virtual Wire.
+ $EN_DIS
+**/
+ UINT8 PchEspiHostC10ReportEnable;
+
+/** Offset 0x0441 - PCH USB2 PHY Power Gating enable
+ 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY
+ Sus Well PG
+ $EN_DIS
+**/
+ UINT8 PmcUsb2PhySusPgEnable;
+
+/** Offset 0x0442 - PCH USB OverCurrent mapping enable
+ 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin
+ mapping allow for NOA usage of OC pins
+ $EN_DIS
+**/
+ UINT8 PchUsbOverCurrentEnable;
+
+/** Offset 0x0443 - Espi Lgmr Memory Range decode
+ This option enables or disables espi lgmr
+ $EN_DIS
+**/
+ UINT8 PchEspiLgmrEnable;
+
+/** Offset 0x0444 - External V1P05 Control Ramp Timer value
+ Hold off time to be used when changing the v1p05_ctrl for external bypass value in us
+**/
+ UINT8 PchFivrExtV1p05RailCtrlRampTmr;
+
+/** Offset 0x0445 - External VNN Control Ramp Timer value
+ Hold off time to be used when changing the vnn_ctrl for external bypass value in us
+**/
+ UINT8 PchFivrExtVnnRailCtrlRampTmr;
+
+/** Offset 0x0446 - Set SATA DEVSLP GPIO Reset Config
+ Set SATA DEVSLP GPIO Reset Config per port. 0x00 - GpioResetDefault, 0x01 - GpioResumeReset,
+ 0x03 - GpioHostDeepReset, 0x05 - GpioPlatformReset, 0x07 - GpioDswReset. One byte
+ for each port, byte0 for port0, byte1 for port1, and so on.
+**/
+ UINT8 SataPortsDevSlpResetConfig[8];
+
+/** Offset 0x044E - PCHHOT# pin
+ Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchHotEnable;
+
+/** Offset 0x044F - SATA LED
+ SATA LED indicating SATA controller activity. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 SataLedEnable;
+
+/** Offset 0x0450 - VRAlert# Pin
+ When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling
+ to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmVrAlert;
+
+/** Offset 0x0451 - AMT Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality.
+ $EN_DIS
+**/
+ UINT8 AmtEnabled;
+
+/** Offset 0x0452 - WatchDog Timer Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting
+ is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 WatchDogEnabled;
+
+/** Offset 0x0453 - PET Progress
+ Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive
+ PET Events. Setting is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 FwProgress;
+
+/** Offset 0x0454 - SOL Switch
+ Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx.
+ Setting is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 AmtSolEnabled;
+
+/** Offset 0x0455 - Reserved
+**/
+ UINT8 Reserved13;
+
+/** Offset 0x0456 - OS Timer
+ 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0.
+**/
+ UINT16 WatchDogTimerOs;
+
+/** Offset 0x0458 - BIOS Timer
+ 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0.
+**/
+ UINT16 WatchDogTimerBios;
+
+/** Offset 0x045A - Force MEBX execution
+ Enable/Disable. 0: Disable, 1: enable, Force MEBX execution.
+ $EN_DIS
+**/
+ UINT8 ForcMebxSyncUp;
+
+/** Offset 0x045B - PCH PCIe root port connection type
+ 0: built-in device, 1:slot
+**/
+ UINT8 PcieRpSlotImplemented[28];
+
+/** Offset 0x0477 - PCIE RP Access Control Services Extended Capability
+ Enable/Disable PCIE RP Access Control Services Extended Capability
+**/
+ UINT8 PcieRpAcsEnabled[28];
+
+/** Offset 0x0493 - PCIE RP Clock Power Management
+ Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
+ can still be controlled by L1 PM substates mechanism
+**/
+ UINT8 PcieRpEnableCpm[28];
+
+/** Offset 0x04AF - Reserved
+**/
+ UINT8 Reserved14;
+
+/** Offset 0x04B0 - PCIE RP Detect Timeout Ms
+ The number of milliseconds within 0~65535 in reference code will wait for link to
+ exit Detect state for enabled ports before assuming there is no device and potentially
+ disabling the port.
+**/
+ UINT16 PcieRpDetectTimeoutMs[28];
+
+/** Offset 0x04E8 - ModPHY SUS Power Domain Dynamic Gating
+ Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on
+ PCH-H. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcModPhySusPgEnable;
+
+/** Offset 0x04E9 - V1p05-PHY supply external FET control
+ Enable/Disable control using EXT_PWR_GATE# pin of external FET to power gate v1p05-PHY
+ supply. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcV1p05PhyExtFetControlEn;
+
+/** Offset 0x04EA - V1p05-IS supply external FET control
+ Enable/Disable control using EXT_PWR_GATE2# pin of external FET to power gate v1p05-IS
+ supply. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcV1p05IsExtFetControlEn;
+
+/** Offset 0x04EB - Enable/Disable PavpEnable
+ Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable
+ $EN_DIS
+**/
+ UINT8 PavpEnable;
+
+/** Offset 0x04EC - CdClock Frequency selection
+ 0 (Default) Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2:
+ 312 Mhz, 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz
+ 0xFF: Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2: 312 Mhz,
+ 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz
+**/
+ UINT8 CdClock;
+
+/** Offset 0x04ED - Enable/Disable PeiGraphicsPeimInit
+ <b>Enable(Default):</b> FSP will initialize the framebuffer and provide it via EFI_PEI_GRAPHICS_INFO_HOB.
+ Disable: FSP will NOT initialize the framebuffer.
+ $EN_DIS
+**/
+ UINT8 PeiGraphicsPeimInit;
+
+/** Offset 0x04EE - Enable D3 Hot in TCSS
+ This policy will enable/disable D3 hot support in IOM
+ $EN_DIS
+**/
+ UINT8 D3HotEnable;
+
+/** Offset 0x04EF - Enable or disable GNA device
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 GnaEnable;
+
+/** Offset 0x04F0 - TypeC port GPIO setting
+ GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined
+ in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Adl
+ = AlderLake)
+**/
+ UINT32 IomTypeCPortPadCfg[8];
+
+/** Offset 0x0510 - CPU USB3 Port Over Current Pin
+ Describe the specific over current pin number of USBC Port N.
+**/
+ UINT8 CpuUsb3OverCurrentPin[8];
+
+/** Offset 0x0518 - Enable D3 Cold in TCSS
+ This policy will enable/disable D3 cold support in IOM
+ $EN_DIS
+**/
+ UINT8 D3ColdEnable;
+
+/** Offset 0x0519 - Enable/Disable PCIe tunneling for USB4
+ Enable/Disable PCIe tunneling for USB4, default is enable
+ $EN_DIS
+**/
+ UINT8 ITbtPcieTunnelingForUsb4;
+
+/** Offset 0x051A - Enable/Disable SkipFspGop
+ Enable: Skip FSP provided GOP driver, Disable(Default): Use FSP provided GOP driver
+ $EN_DIS
+**/
+ UINT8 SkipFspGop;
+
+/** Offset 0x051B - TC State in TCSS
+ This TC C-State Limit in IOM
+**/
+ UINT8 TcCstateLimit;
+
+/** Offset 0x051C - Intel Graphics VBT (Video BIOS Table) Size
+ Size of Internal Graphics VBT Image
+**/
+ UINT32 VbtSize;
+
+/** Offset 0x0520 - Platform LID Status for LFP Displays.
+ LFP Display Lid Status (LID_STATUS enum): 0 (Default): LidClosed, 1: LidOpen.
+ 0: LidClosed, 1: LidOpen
+**/
+ UINT8 LidStatus;
+
+/** Offset 0x0521 - Reserved
+**/
+ UINT8 Reserved15[8];
+
+/** Offset 0x0529 - Enable VMD controller
+ Enable/disable to VMD controller.0: Disable; 1: Enable(Default)
+ $EN_DIS
+**/
+ UINT8 VmdEnable;
+
+/** Offset 0x052A - Map port under VMD
+ Map/UnMap port under VMD
+ $EN_DIS
+**/
+ UINT8 VmdPort[31];
+
+/** Offset 0x0549 - VMD Port Device
+ VMD Root port device number.
+**/
+ UINT8 VmdPortDev[31];
+
+/** Offset 0x0568 - VMD Port Func
+ VMD Root port function number.
+**/
+ UINT8 VmdPortFunc[31];
+
+/** Offset 0x0587 - VMD Config Bar size
+ Set The VMD Config Bar Size.
+**/
+ UINT8 VmdCfgBarSize;
+
+/** Offset 0x0588 - VMD Config Bar Attributes
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+**/
+ UINT8 VmdCfgBarAttr;
+
+/** Offset 0x0589 - VMD Mem Bar1 size
+ Set The VMD Mem Bar1 Size.
+**/
+ UINT8 VmdMemBarSize1;
+
+/** Offset 0x058A - VMD Mem Bar1 Attributes
+ 0: VMD_32BIT_NONPREFETCH(Default), 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+**/
+ UINT8 VmdMemBar1Attr;
+
+/** Offset 0x058B - VMD Mem Bar2 size
+ Set The VMD Mem Bar2 Size.
+**/
+ UINT8 VmdMemBarSize2;
+
+/** Offset 0x058C - VMD Mem Bar2 Attributes
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+**/
+ UINT8 VmdMemBar2Attr;
+
+/** Offset 0x058D - Reserved
+**/
+ UINT8 Reserved16[3];
+
+/** Offset 0x0590 - VMD Variable
+ VMD Variable Pointer.
+**/
+ UINT32 VmdVariablePtr;
+
+/** Offset 0x0594 - Temporary CfgBar address for VMD
+ VMD Variable Pointer.
+**/
+ UINT32 VmdCfgBarBase;
+
+/** Offset 0x0598 - Temporary MemBar1 address for VMD
+ VMD Variable Pointer.
+**/
+ UINT32 VmdMemBar1Base;
+
+/** Offset 0x059C - Temporary MemBar2 address for VMD
+ VMD Variable Pointer.
+**/
+ UINT32 VmdMemBar2Base;
+
+/** Offset 0x05A0 - Reserved
+**/
+ UINT8 Reserved17;
+
+/** Offset 0x05A1 - Enable/Disable PMC-PD Solution
+ This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution
+ $EN_DIS
+**/
+ UINT8 PmcPdEnable;
+
+/** Offset 0x05A2 - TCSS Aux Orientation Override Enable
+ Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides
+**/
+ UINT16 TcssAuxOri;
+
+/** Offset 0x05A4 - TCSS HSL Orientation Override Enable
+ Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides
+**/
+ UINT16 TcssHslOri;
+
+/** Offset 0x05A6 - USB override in IOM
+ This policy will enable/disable USB Connect override in IOM
+ $EN_DIS
+**/
+ UINT8 UsbOverride;
+
+/** Offset 0x05A7 - ITBT Root Port Enable
+ ITBT Root Port Enable, 0:Disable, 1:Enable
+ 0:Disable, 1:Enable
+**/
+ UINT8 ITbtPcieRootPortEn[4];
+
+/** Offset 0x05AB - TCSS USB Port Enable
+ Bits 0, 1, ... max Type C port control enables
+**/
+ UINT8 UsbTcPortEn;
+
+/** Offset 0x05AC - ITBTForcePowerOn Timeout value
+ ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000.
+ 100 = 100 ms.
+**/
+ UINT16 ITbtForcePowerOnTimeoutInMs;
+
+/** Offset 0x05AE - ITbtConnectTopology Timeout value
+ ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range
+ is 0-10000. 100 = 100 ms.
+**/
+ UINT16 ITbtConnectTopologyTimeoutInMs;
+
+/** Offset 0x05B0 - VCCST request for IOM
+ This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5
+ $EN_DIS
+**/
+ UINT8 VccSt;
+
+/** Offset 0x05B1 - Reserved
+**/
+ UINT8 Reserved18;
+
+/** Offset 0x05B2 - ITBT DMA LTR
+ TCSS DMA1, DMA2 LTR value
+**/
+ UINT16 ITbtDmaLtr[2];
+
+/** Offset 0x05B6 - Reserved
+**/
+ UINT8 Reserved19;
+
+/** Offset 0x05B7 - Enable/Disable PTM
+ This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports
+ $EN_DIS
+**/
+ UINT8 PtmEnabled[4];
+
+/** Offset 0x05BB - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 SaPcieItbtRpLtrEnable[4];
+
+/** Offset 0x05BF - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4];
+
+/** Offset 0x05C3 - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x05C7 - Reserved
+**/
+ UINT8 Reserved20;
+
+/** Offset 0x05C8 - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4];
+
+/** Offset 0x05D0 - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4];
+
+/** Offset 0x05D4 - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x05D8 - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4];
+
+/** Offset 0x05E0 - Force LTR Override
+ Force LTR Override.
+**/
+ UINT8 SaPcieItbtRpForceLtrOverride[4];
+
+/** Offset 0x05E4 - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 SaPcieItbtRpLtrConfigLock[4];
+
+/** Offset 0x05E8 - Advanced Encryption Standard (AES) feature
+ Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable
+ $EN_DIS
+**/
+ UINT8 AesEnable;
+
+/** Offset 0x05E9 - Power State 3 enable/disable
+ PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>.
+ For all VR Indexes
+**/
+ UINT8 Psi3Enable[5];
+
+/** Offset 0x05EE - Power State 4 enable/disable
+ PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For
+ all VR Indexes
+**/
+ UINT8 Psi4Enable[5];
+
+/** Offset 0x05F3 - Reserved
+**/
+ UINT8 Reserved21;
+
+/** Offset 0x05F4 - Imon slope correction
+ PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
+ Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
+**/
+ UINT16 ImonSlope[5];
+
+/** Offset 0x05FE - Imon offset correction
+ PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer.
+ Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b>
+**/
+ UINT16 ImonOffset[5];
+
+/** Offset 0x0608 - Enable/Disable BIOS configuration of VR
+ Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes
+**/
+ UINT8 VrConfigEnable[5];
+
+/** Offset 0x060D - Thermal Design Current enable/disable
+ PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1:
+ Enable.For all VR Indexes
+**/
+ UINT8 TdcEnable[5];
+
+/** Offset 0x0612 - Reserved
+**/
+ UINT8 Reserved22[2];
+
+/** Offset 0x0614 - Thermal Design Current time window
+ PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
+ Range 1ms to 448s
+**/
+ UINT32 TdcTimeWindow[5];
+
+/** Offset 0x0628 - Thermal Design Current Lock
+ PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For
+ all VR Indexes
+**/
+ UINT8 TdcLock[5];
+
+/** Offset 0x062D - Platform Psys slope correction
+ PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in
+ 1/100 increment values. Range is 0-200. 125 = 1.25
+**/
+ UINT8 PsysSlope;
+
+/** Offset 0x062E - Platform Psys offset correction
+ PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/1000,
+ Range 0-63999. For an offset of 25.348, enter 25348.
+**/
+ UINT16 PsysOffset;
+
+/** Offset 0x0630 - Acoustic Noise Mitigation feature
+ Enable or Disable Acoustic Noise Mitigation feature. <b>0: Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 AcousticNoiseMitigation;
+
+/** Offset 0x0631 - Disable Fast Slew Rate for Deep Package C States for VR domains
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
+**/
+ UINT8 FastPkgCRampDisable[5];
+
+/** Offset 0x0636 - Slew Rate configuration for Deep Package C States for VR domains
+ Slew Rate configuration for Deep Package C States for VR domains based on Acoustic
+ Noise Mitigation feature enabled. ADL supports VCCIA FAST/2/4/8/16, VCCGT FAST/2/4/8
+ and VCCSA FAST/2 <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRate[5];
+
+/** Offset 0x063B - Reserved
+**/
+ UINT8 Reserved23;
+
+/** Offset 0x063C - Thermal Design Current current limit
+ PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units.
+ Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes
+**/
+ UINT16 TdcCurrentLimit[5];
+
+/** Offset 0x0646 - AcLoadline
+ PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249. <b>Intel Recommended Defaults vary by domain and SKU.
+**/
+ UINT16 AcLoadline[5];
+
+/** Offset 0x0650 - DcLoadline
+ PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b>
+**/
+ UINT16 DcLoadline[5];
+
+/** Offset 0x065A - Power State 1 Threshold current
+ PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi1Threshold[5];
+
+/** Offset 0x0664 - Power State 2 Threshold current
+ PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi2Threshold[5];
+
+/** Offset 0x066E - Power State 3 Threshold current
+ PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi3Threshold[5];
+
+/** Offset 0x0678 - Icc Max limit
+ PCODE MMIO Mailbox: VR Icc Max limit. 0-512A in 1/4 A units. 400 = 100A
+**/
+ UINT16 IccMax[5];
+
+/** Offset 0x0682 - Enable or Disable TXT
+ Enable or Disable TXT; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 TxtEnable;
+
+/** Offset 0x0683 - Skip Multi-Processor Initialization
+ When this is skipped, boot loader must initialize processors before SilicionInit
+ API. </b>0: Initialize; <b>1: Skip
+ $EN_DIS
+**/
+ UINT8 SkipMpInit;
+
+/** Offset 0x0684 - FIVR RFI Frequency
+ PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0:
+ Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock;
+ 0-1535 (Up to 153.5MHz) for 19MHz clock.
+**/
+ UINT16 FivrRfiFrequency;
+
+/** Offset 0x0686 - FIVR RFI Spread Spectrum
+ Set the Spread Spectrum Range. <b>1.5%</b>; Range: 0.5%, 1%, 1.5%, 2%, 3%, 4%, 5%,
+ 6%. Each Range is translated to an encoded value for FIVR register. 0.5% = 0, 1%
+ = 3, 1.5% = 8, 2% = 18, 3% = 28, 4% = 34, 5% = 39, 6% = 44.
+**/
+ UINT8 FivrSpreadSpectrum;
+
+/** Offset 0x0687 - Reserved
+**/
+ UINT8 Reserved24;
+
+/** Offset 0x0688 - CpuBistData
+ Pointer CPU BIST Data
+**/
+ UINT32 CpuBistData;
+
+/** Offset 0x068C - CpuMpPpi
+ <b>Optional</b> pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI.
+ If not NULL, FSP will use the boot loader's implementation of multiprocessing.
+ See section 5.1.4 of the FSP Integration Guide for more details.
+**/
+ UINT32 CpuMpPpi;
+
+/** Offset 0x0690 - Pre Wake Randomization time
+ PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum pre-wake
+ randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation
+ is enabled. Range 0-255 <b>0</b>.
+**/
+ UINT8 PreWake;
+
+/** Offset 0x0691 - Ramp Up Randomization time
+ PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Up
+ randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation
+ is enabled.Range 0-255 <b>0</b>.
+**/
+ UINT8 RampUp;
+
+/** Offset 0x0692 - Ramp Down Randomization time
+ PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Down
+ randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation
+ is enabled.Range 0-255 <b>0</b>.
+**/
+ UINT8 RampDown;
+
+/** Offset 0x0693 - Reserved
+**/
+ UINT8 Reserved25;
+
+/** Offset 0x0694 - VR Voltage Limit
+ PCODE MMIO Mailbox: Voltage Limit. Range is 0 - 7999mV
+**/
+ UINT16 VrVoltageLimit[5];
+
+/** Offset 0x069E - VccIn Aux Imon IccMax
+ PCODE MMIO Mailbox: VccIn Aux Imon IccMax. <b>0 - Auto</b> Values are in 1/4 Amp
+ increments. Range is 0-512.
+**/
+ UINT16 VccInAuxImonIccImax;
+
+/** Offset 0x06A0 - Reserved
+**/
+ UINT8 Reserved26[7];
+
+/** Offset 0x06A7 - VccIn Aux Imon slope correction
+ PCODE MMIO Mailbox: VccIn Aux Imon slope correction. <b>0 - Auto</b> Specified in
+ 1/100 increment values. Range is 0-200. 125 = 1.25
+**/
+ UINT8 VccInAuxImonSlope;
+
+/** Offset 0x06A8 - Reserved
+**/
+ UINT8 Reserved27[2];
+
+/** Offset 0x06AA - FIVR RFI Spread Spectrum Enable or disable
+ Enable or Disable FIVR RFI Spread Spectrum. 0: Disable ; <b> 1: Enable </b>
+**/
+ UINT8 FivrSpectrumEnable;
+
+/** Offset 0x06AB - Reserved
+**/
+ UINT8 Reserved28[13];
+
+/** Offset 0x06B8 - PpinSupport to view Protected Processor Inventory Number
+ Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this
+ flag is set) for PPIN Support
+ 0: Disable, 1: Enable, 2: Auto
+**/
+ UINT8 PpinSupport;
+
+/** Offset 0x06B9 - Enable or Disable Minimum Voltage Override
+ Enable or disable Minimum Voltage overrides ; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 EnableMinVoltageOverride;
+
+/** Offset 0x06BA - Min Voltage for Runtime
+ PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride
+ = 1. Range 0 to 1999mV. <b> 0: 0mV </b>
+**/
+ UINT16 MinVoltageRuntime;
+
+/** Offset 0x06BC - Reserved
+**/
+ UINT8 Reserved29[2];
+
+/** Offset 0x06BE - Min Voltage for C8
+ PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride =
+ 1. Range 0 to 1999mV. <b> 0: 0mV </b>
+**/
+ UINT16 MinVoltageC8;
+
+/** Offset 0x06C0 - Smbios Type4 Max Speed Override
+ Provide the option for platform to override the MaxSpeed field of Smbios Type 4.
+ If this value is not zero, it dominates the field.
+**/
+ UINT16 SmbiosType4MaxSpeedOverride;
+
+/** Offset 0x06C2 - Current root mean square
+ PCODE MMIO Mailbox: Current root mean square; <b>0: Disable</b>; 1: Enable.For all
+ VR Indexes
+**/
+ UINT8 Irms[5];
+
+/** Offset 0x06C7 - AvxDisable
+ Enable or Disable AVX Support. This only applicable when all small core is disabled.
+ 0: Enable, 1: Disable
+**/
+ UINT8 AvxDisable;
+
+/** Offset 0x06C8 - Avx3Disable
+ DEPRECATED
+ 0: Enable, 1: Disable
+**/
+ UINT8 Avx3Disable;
+
+/** Offset 0x06C9 - Reserved
+**/
+ UINT8 Reserved30;
+
+/** Offset 0x06CA - CPU VR Power Delivery Design
+ Used to communicate the power delivery design capability of the board. This value
+ is an enum of the available power delivery segments that are defined in the Platform
+ Design Guide.
+**/
+ UINT8 VrPowerDeliveryDesign;
+
+/** Offset 0x06CB - Reserved
+**/
+ UINT8 Reserved31[32];
+
+/** Offset 0x06EB - Enable Power Optimizer
+ Enable DMI Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 PchPwrOptEnable;
+
+/** Offset 0x06EC - PCH Flash Protection Ranges Write Enble
+ Write or erase is blocked by hardware.
+**/
+ UINT8 PchWriteProtectionEnable[5];
+
+/** Offset 0x06F1 - PCH Flash Protection Ranges Read Enble
+ Read is blocked by hardware.
+**/
+ UINT8 PchReadProtectionEnable[5];
+
+/** Offset 0x06F6 - PCH Protect Range Limit
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for
+ limit comparison.
+**/
+ UINT16 PchProtectedRangeLimit[5];
+
+/** Offset 0x0700 - PCH Protect Range Base
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be 0.
+**/
+ UINT16 PchProtectedRangeBase[5];
+
+/** Offset 0x070A - Enable Pme
+ Enable Azalia wake-on-ring.
+ $EN_DIS
+**/
+ UINT8 PchHdaPme;
+
+/** Offset 0x070B - HD Audio Link Frequency
+ HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz.
+ 0: 6MHz, 1: 12MHz, 2: 24MHz
+**/
+ UINT8 PchHdaLinkFrequency;
+
+/** Offset 0x070C - Enable PCH ISH SPI Cs0 pins assigned
+ Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable.
+**/
+ UINT8 PchIshSpiCs0Enable[1];
+
+/** Offset 0x070D - Enable PCH Io Apic Entry 24-119
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIoApicEntry24_119;
+
+/** Offset 0x070E - PCH Io Apic ID
+ This member determines IOAPIC ID. Default is 0x02.
+**/
+ UINT8 PchIoApicId;
+
+/** Offset 0x070F - Enable PCH ISH SPI pins assigned
+ Set if ISH SPI native pins are to be enabled by BIOS. 0: Disable; 1: Enable.
+**/
+ UINT8 PchIshSpiEnable[1];
+
+/** Offset 0x0710 - Enable PCH ISH UART pins assigned
+ Set if ISH UART native pins are to be enabled by BIOS. 0: Disable; 1: Enable.
+**/
+ UINT8 PchIshUartEnable[2];
+
+/** Offset 0x0712 - Enable PCH ISH I2C pins assigned
+ Set if ISH I2C native pins are to be enabled by BIOS. 0: Disable; 1: Enable.
+**/
+ UINT8 PchIshI2cEnable[3];
+
+/** Offset 0x0715 - Enable PCH ISH GP pins assigned
+ Set if ISH GP native pins are to be enabled by BIOS. 0: Disable; 1: Enable.
+**/
+ UINT8 PchIshGpEnable[8];
+
+/** Offset 0x071D - PCH ISH PDT Unlock Msg
+ 0: False; 1: True.
+ $EN_DIS
+**/
+ UINT8 PchIshPdtUnlock;
+
+/** Offset 0x071E - Enable PCH Lan LTR capabilty of PCH internal LAN
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchLanLtrEnable;
+
+/** Offset 0x071F - Enable LOCKDOWN BIOS LOCK
+ Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region
+ protection.
+ $EN_DIS
+**/
+ UINT8 PchLockDownBiosLock;
+
+/** Offset 0x0720 - PCH Compatibility Revision ID
+ This member describes whether or not the CRID feature of PCH should be enabled.
+ $EN_DIS
+**/
+ UINT8 PchCrid;
+
+/** Offset 0x0721 - RTC BIOS Interface Lock
+ Enable RTC BIOS interface lock. When set, prevents RTC TS (BUC.TS) from being changed.
+ $EN_DIS
+**/
+ UINT8 RtcBiosInterfaceLock;
+
+/** Offset 0x0722 - RTC Cmos Memory Lock
+ Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
+ and and lower 128-byte bank of RTC RAM.
+ $EN_DIS
+**/
+ UINT8 RtcMemoryLock;
+
+/** Offset 0x0723 - Enable PCIE RP HotPlug
+ Indicate whether the root port is hot plug available.
+**/
+ UINT8 PcieRpHotPlug[28];
+
+/** Offset 0x073F - Enable PCIE RP Pm Sci
+ Indicate whether the root port power manager SCI is enabled.
+**/
+ UINT8 PcieRpPmSci[28];
+
+/** Offset 0x075B - Enable PCIE RP Transmitter Half Swing
+ Indicate whether the Transmitter Half Swing is enabled.
+**/
+ UINT8 PcieRpTransmitterHalfSwing[28];
+
+/** Offset 0x0777 - Enable PCIE RP Clk Req Detect
+ Probe CLKREQ# signal before enabling CLKREQ# based power management.
+**/
+ UINT8 PcieRpClkReqDetect[28];
+
+/** Offset 0x0793 - PCIE RP Advanced Error Report
+ Indicate whether the Advanced Error Reporting is enabled.
+**/
+ UINT8 PcieRpAdvancedErrorReporting[28];
+
+/** Offset 0x07AF - PCIE RP Unsupported Request Report
+ Indicate whether the Unsupported Request Report is enabled.
+**/
+ UINT8 PcieRpUnsupportedRequestReport[28];
+
+/** Offset 0x07CB - PCIE RP Fatal Error Report
+ Indicate whether the Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpFatalErrorReport[28];
+
+/** Offset 0x07E7 - PCIE RP No Fatal Error Report
+ Indicate whether the No Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpNoFatalErrorReport[28];
+
+/** Offset 0x0803 - PCIE RP Correctable Error Report
+ Indicate whether the Correctable Error Report is enabled.
+**/
+ UINT8 PcieRpCorrectableErrorReport[28];
+
+/** Offset 0x081F - PCIE RP System Error On Fatal Error
+ Indicate whether the System Error on Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnFatalError[28];
+
+/** Offset 0x083B - PCIE RP System Error On Non Fatal Error
+ Indicate whether the System Error on Non Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnNonFatalError[28];
+
+/** Offset 0x0857 - PCIE RP System Error On Correctable Error
+ Indicate whether the System Error on Correctable Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnCorrectableError[28];
+
+/** Offset 0x0873 - PCIE RP Max Payload
+ Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD.
+**/
+ UINT8 PcieRpMaxPayload[28];
+
+/** Offset 0x088F - Touch Host Controller Port 0 Assignment
+ Assign THC Port 0
+ 0x0:ThcAssignmentNone, 0x1:ThcAssignmentThc0
+**/
+ UINT8 ThcPort0Assignment;
+
+/** Offset 0x0890 - Touch Host Controller Port 0 Interrupt Pin Mux
+ Set THC Port 0 Pin Muxing Value if signal can be enabled on multiple pads. Refer
+ to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values.
+**/
+ UINT32 ThcPort0InterruptPinMuxing;
+
+/** Offset 0x0894 - Reserved
+**/
+ UINT8 Reserved32;
+
+/** Offset 0x0895 - Touch Host Controller Port 1 Assignment
+ Assign THC Port 1
+ 0x0:ThcAssignmentNone, 0x1:ThcPort1AssignmentThc0, 0x2:ThcAssignmentThc1
+**/
+ UINT8 ThcPort1Assignment;
+
+/** Offset 0x0896 - Reserved
+**/
+ UINT8 Reserved33[2];
+
+/** Offset 0x0898 - Touch Host Controller Port 1 Interrupt Pin Mux
+ Set THC Port 1 Pin Muxing Value if signal can be enabled on multiple pads. Refer
+ to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values.
+**/
+ UINT32 ThcPort1InterruptPinMuxing;
+
+/** Offset 0x089C - Reserved
+**/
+ UINT8 Reserved34;
+
+/** Offset 0x089D - PCIE RP Pcie Speed
+ Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3;
+ 4: Gen4 (see: PCIE_SPEED).
+**/
+ UINT8 PcieRpPcieSpeed[28];
+
+/** Offset 0x08B9 - PCIE RP Physical Slot Number
+ Indicates the slot number for the root port. Default is the value as root port index.
+**/
+ UINT8 PcieRpPhysicalSlotNumber[28];
+
+/** Offset 0x08D5 - PCIE RP Completion Timeout
+ The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default.
+**/
+ UINT8 PcieRpCompletionTimeout[28];
+
+/** Offset 0x08F1 - PCIE RP Aspm
+ The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is
+ PchPcieAspmAutoConfig.
+**/
+ UINT8 PcieRpAspm[28];
+
+/** Offset 0x090D - PCIE RP L1 Substates
+ The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL).
+ Default is PchPcieL1SubstatesL1_1_2.
+**/
+ UINT8 PcieRpL1Substates[28];
+
+/** Offset 0x0929 - Reserved
+**/
+ UINT8 Reserved35[28];
+
+/** Offset 0x0945 - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 PcieRpLtrEnable[28];
+
+/** Offset 0x0961 - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PcieRpLtrConfigLock[28];
+
+/** Offset 0x097D - PCIe override default settings for EQ
+ Choose PCIe EQ method
+ $EN_DIS
+**/
+ UINT8 PcieEqOverrideDefault;
+
+/** Offset 0x097E - PCIe choose EQ method
+ Choose PCIe EQ method
+ 0: HardwareEq, 1: FixedEq
+**/
+ UINT8 PcieEqMethod;
+
+/** Offset 0x097F - PCIe choose EQ mode
+ Choose PCIe EQ mode
+ 0: PresetEq, 1: CoefficientEq
+**/
+ UINT8 PcieEqMode;
+
+/** Offset 0x0980 - PCIe EQ local transmitter override
+ Enable/Disable local transmitter override
+ $EN_DIS
+**/
+ UINT8 PcieEqLocalTransmitterOverrideEnable;
+
+/** Offset 0x0981 - PCIe number of valid list entries
+ Select number of presets or coefficients depending on the mode
+**/
+ UINT8 PcieEqPh3NumberOfPresetsOrCoefficients;
+
+/** Offset 0x0982 - PCIe pre-cursor coefficient list
+ Provide a list of pre-cursor coefficients to be used during phase 3 EQ
+**/
+ UINT8 PcieEqPh3PreCursorList[10];
+
+/** Offset 0x098C - PCIe post-cursor coefficient list
+ Provide a list of post-cursor coefficients to be used during phase 3 EQ
+**/
+ UINT8 PcieEqPh3PostCursorList[10];
+
+/** Offset 0x0996 - PCIe preset list
+ Provide a list of presets to be used during phase 3 EQ
+**/
+ UINT8 PcieEqPh3PresetList[11];
+
+/** Offset 0x09A1 - Reserved
+**/
+ UINT8 Reserved36[3];
+
+/** Offset 0x09A4 - PCIe EQ phase 1 downstream transmitter port preset
+ Allows to select the downstream port preset value that will be used during phase
+ 1 of equalization
+**/
+ UINT32 PcieEqPh1DownstreamPortTransmitterPreset;
+
+/** Offset 0x09A8 - PCIe EQ phase 1 upstream tranmitter port preset
+ Allows to select the upstream port preset value that will be used during phase 1
+ of equalization
+**/
+ UINT32 PcieEqPh1UpstreamPortTransmitterPreset;
+
+/** Offset 0x09AC - PCIe EQ phase 2 local transmitter override preset
+ Allows to select the value of the preset used during phase 2 local transmitter override
+**/
+ UINT8 PcieEqPh2LocalTransmitterOverridePreset;
+
+/** Offset 0x09AD - PCIE Enable Peer Memory Write
+ This member describes whether Peer Memory Writes are enabled on the platform.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePeerMemoryWrite[28];
+
+/** Offset 0x09C9 - PCIE Compliance Test Mode
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ $EN_DIS
+**/
+ UINT8 PcieComplianceTestMode;
+
+/** Offset 0x09CA - PCIE Rp Function Swap
+ DEPRECATED. Allows BIOS to use root port function number swapping when root port
+ of function 0 is disabled.
+ $EN_DIS
+**/
+ UINT8 PcieRpFunctionSwap;
+
+/** Offset 0x09CB - Enable/Disable PEG GEN3 Static EQ Phase1 programming
+ Program Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets
+ Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 CpuPcieGen3ProgramStaticEq;
+
+/** Offset 0x09CC - Enable/Disable GEN4 Static EQ Phase1 programming
+ Program Gen4 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets
+ Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 CpuPcieGen4ProgramStaticEq;
+
+/** Offset 0x09CD - PCH Pm PME_B0_S5_DIS
+ When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1.
+ $EN_DIS
+**/
+ UINT8 PchPmPmeB0S5Dis;
+
+/** Offset 0x09CE - PCIE IMR
+ Enables Isolated Memory Region for PCIe.
+ $EN_DIS
+**/
+ UINT8 PcieRpImrEnabled;
+
+/** Offset 0x09CF - PCIE IMR port number
+ Selects PCIE root port number for IMR feature.
+**/
+ UINT8 PcieRpImrSelection;
+
+/** Offset 0x09D0 - PCH Pm Wol Enable Override
+ Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolEnableOverride;
+
+/** Offset 0x09D1 - PCH Pm Pcie Wake From DeepSx
+ Determine if enable PCIe to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmPcieWakeFromDeepSx;
+
+/** Offset 0x09D2 - PCH Pm WoW lan Enable
+ Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanEnable;
+
+/** Offset 0x09D3 - PCH Pm WoW lan DeepSx Enable
+ Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the
+ PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanDeepSxEnable;
+
+/** Offset 0x09D4 - PCH Pm Lan Wake From DeepSx
+ Determine if enable LAN to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmLanWakeFromDeepSx;
+
+/** Offset 0x09D5 - PCH Pm Deep Sx Pol
+ Deep Sx Policy.
+ $EN_DIS
+**/
+ UINT8 PchPmDeepSxPol;
+
+/** Offset 0x09D6 - PCH Pm Slp S3 Min Assert
+ SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms.
+**/
+ UINT8 PchPmSlpS3MinAssert;
+
+/** Offset 0x09D7 - PCH Pm Slp S4 Min Assert
+ SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s.
+**/
+ UINT8 PchPmSlpS4MinAssert;
+
+/** Offset 0x09D8 - PCH Pm Slp Sus Min Assert
+ SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s.
+**/
+ UINT8 PchPmSlpSusMinAssert;
+
+/** Offset 0x09D9 - PCH Pm Slp A Min Assert
+ SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s.
+**/
+ UINT8 PchPmSlpAMinAssert;
+
+/** Offset 0x09DA - USB Overcurrent Override for VISA
+ This option overrides USB Over Current enablement state that USB OC will be disabled
+ after enabling this option. Enable when VISA pin is muxed with USB OC
+ $EN_DIS
+**/
+ UINT8 PchEnableDbcObs;
+
+/** Offset 0x09DB - PCH Pm Slp Strch Sus Up
+ Enable SLP_X Stretching After SUS Well Power Up.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpStrchSusUp;
+
+/** Offset 0x09DC - PCH Pm Slp Lan Low Dc
+ Enable/Disable SLP_LAN# Low on DC Power.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpLanLowDc;
+
+/** Offset 0x09DD - PCH Pm Pwr Btn Override Period
+ PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.
+**/
+ UINT8 PchPmPwrBtnOverridePeriod;
+
+/** Offset 0x09DE - PCH Pm Disable Dsx Ac Present Pulldown
+ When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableDsxAcPresentPulldown;
+
+/** Offset 0x09DF - PCH Pm Disable Native Power Button
+ Power button native mode disable.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableNativePowerButton;
+
+/** Offset 0x09E0 - PCH Pm ME_WAKE_STS
+ Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmMeWakeSts;
+
+/** Offset 0x09E1 - PCH Pm WOL_OVR_WK_STS
+ Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolOvrWkSts;
+
+/** Offset 0x09E2 - PCH Pm Reset Power Cycle Duration
+ Could be customized in the unit of second. Please refer to EDS for all support settings.
+ 0 is default, 1 is 1 second, 2 is 2 seconds, ...
+**/
+ UINT8 PchPmPwrCycDur;
+
+/** Offset 0x09E3 - PCH Pm Pcie Pll Ssc
+ Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No
+ BIOS override.
+**/
+ UINT8 PchPmPciePllSsc;
+
+/** Offset 0x09E4 - PCH Legacy IO Low Latency Enable
+ Set to enable low latency of legacy IO. <b>0: Disable</b>, 1: Enable
+ $EN_DIS
+**/
+ UINT8 PchLegacyIoLowLatency;
+
+/** Offset 0x09E5 - PCH Sata Pwr Opt Enable
+ SATA Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 SataPwrOptEnable;
+
+/** Offset 0x09E6 - PCH Sata eSATA Speed Limit
+ When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed.
+ $EN_DIS
+**/
+ UINT8 EsataSpeedLimit;
+
+/** Offset 0x09E7 - PCH Sata Speed Limit
+ Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault.
+**/
+ UINT8 SataSpeedLimit;
+
+/** Offset 0x09E8 - Enable SATA Port HotPlug
+ Enable SATA Port HotPlug.
+**/
+ UINT8 SataPortsHotPlug[8];
+
+/** Offset 0x09F0 - Enable SATA Port Interlock Sw
+ Enable SATA Port Interlock Sw.
+**/
+ UINT8 SataPortsInterlockSw[8];
+
+/** Offset 0x09F8 - Enable SATA Port External
+ Enable SATA Port External.
+**/
+ UINT8 SataPortsExternal[8];
+
+/** Offset 0x0A00 - Enable SATA Port SpinUp
+ Enable the COMRESET initialization Sequence to the device.
+**/
+ UINT8 SataPortsSpinUp[8];
+
+/** Offset 0x0A08 - Enable SATA Port Solid State Drive
+ 0: HDD; 1: SSD.
+**/
+ UINT8 SataPortsSolidStateDrive[8];
+
+/** Offset 0x0A10 - Enable SATA Port Enable Dito Config
+ Enable DEVSLP Idle Timeout settings (DmVal, DitoVal).
+**/
+ UINT8 SataPortsEnableDitoConfig[8];
+
+/** Offset 0x0A18 - Enable SATA Port DmVal
+ DITO multiplier. Default is 15.
+**/
+ UINT8 SataPortsDmVal[8];
+
+/** Offset 0x0A20 - Enable SATA Port DmVal
+ DEVSLP Idle Timeout (DITO), Default is 625.
+**/
+ UINT16 SataPortsDitoVal[8];
+
+/** Offset 0x0A30 - Enable SATA Port ZpOdd
+ Support zero power ODD.
+**/
+ UINT8 SataPortsZpOdd[8];
+
+/** Offset 0x0A38 - PCH Sata Rst Raid Alternate Id
+ Enable RAID Alternate ID.
+ $EN_DIS
+**/
+ UINT8 SataRstRaidDeviceId;
+
+/** Offset 0x0A39 - PCH Sata Rst Pcie Storage Remap enable
+ Enable Intel RST for PCIe Storage remapping.
+**/
+ UINT8 SataRstPcieEnable[3];
+
+/** Offset 0x0A3C - PCH Sata Rst Pcie Storage Port
+ Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect).
+**/
+ UINT8 SataRstPcieStoragePort[3];
+
+/** Offset 0x0A3F - PCH Sata Rst Pcie Device Reset Delay
+ PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
+**/
+ UINT8 SataRstPcieDeviceResetDelay[3];
+
+/** Offset 0x0A42 - UFS enable/disable
+ Enable/Disable UFS controller, One byte for each Controller - (1,0) to enable controller
+ 0 and (0,1) to enable controller 1
+ $EN_DIS
+**/
+ UINT8 UfsEnable[2];
+
+/** Offset 0x0A44 - IEH Mode
+ Integrated Error Handler Mode, 0: Bypass, 1: Enable
+ 0: Bypass, 1:Enable
+**/
+ UINT8 IehMode;
+
+/** Offset 0x0A45 - Reserved
+**/
+ UINT8 Reserved37;
+
+/** Offset 0x0A46 - Thermal Throttling Custimized T0Level Value
+ Custimized T0Level value.
+**/
+ UINT16 PchT0Level;
+
+/** Offset 0x0A48 - Thermal Throttling Custimized T1Level Value
+ Custimized T1Level value.
+**/
+ UINT16 PchT1Level;
+
+/** Offset 0x0A4A - Thermal Throttling Custimized T2Level Value
+ Custimized T2Level value.
+**/
+ UINT16 PchT2Level;
+
+/** Offset 0x0A4C - Enable The Thermal Throttle
+ Enable the thermal throttle function.
+ $EN_DIS
+**/
+ UINT8 PchTTEnable;
+
+/** Offset 0x0A4D - PMSync State 13
+ When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force
+ at least T2 state.
+ $EN_DIS
+**/
+ UINT8 PchTTState13Enable;
+
+/** Offset 0x0A4E - Thermal Throttle Lock
+ Thermal Throttle Lock.
+ $EN_DIS
+**/
+ UINT8 PchTTLock;
+
+/** Offset 0x0A4F - Thermal Throttling Suggested Setting
+ Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 TTSuggestedSetting;
+
+/** Offset 0x0A50 - Enable PCH Cross Throttling
+ Enable/Disable PCH Cross Throttling
+ $EN_DIS
+**/
+ UINT8 TTCrossThrottling;
+
+/** Offset 0x0A51 - DMI Thermal Sensor Autonomous Width Enable
+ DMI Thermal Sensor Autonomous Width Enable.
+ $EN_DIS
+**/
+ UINT8 PchDmiTsawEn;
+
+/** Offset 0x0A52 - DMI Thermal Sensor Suggested Setting
+ DMT thermal sensor suggested representative values.
+ $EN_DIS
+**/
+ UINT8 DmiSuggestedSetting;
+
+/** Offset 0x0A53 - Thermal Sensor 0 Target Width
+ Thermal Sensor 0 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS0TW;
+
+/** Offset 0x0A54 - Thermal Sensor 1 Target Width
+ Thermal Sensor 1 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS1TW;
+
+/** Offset 0x0A55 - Thermal Sensor 2 Target Width
+ Thermal Sensor 2 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS2TW;
+
+/** Offset 0x0A56 - Thermal Sensor 3 Target Width
+ Thermal Sensor 3 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS3TW;
+
+/** Offset 0x0A57 - Port 0 T1 Multipler
+ Port 0 T1 Multipler.
+**/
+ UINT8 SataP0T1M;
+
+/** Offset 0x0A58 - Port 0 T2 Multipler
+ Port 0 T2 Multipler.
+**/
+ UINT8 SataP0T2M;
+
+/** Offset 0x0A59 - Port 0 T3 Multipler
+ Port 0 T3 Multipler.
+**/
+ UINT8 SataP0T3M;
+
+/** Offset 0x0A5A - Port 0 Tdispatch
+ Port 0 Tdispatch.
+**/
+ UINT8 SataP0TDisp;
+
+/** Offset 0x0A5B - Port 1 T1 Multipler
+ Port 1 T1 Multipler.
+**/
+ UINT8 SataP1T1M;
+
+/** Offset 0x0A5C - Port 1 T2 Multipler
+ Port 1 T2 Multipler.
+**/
+ UINT8 SataP1T2M;
+
+/** Offset 0x0A5D - Port 1 T3 Multipler
+ Port 1 T3 Multipler.
+**/
+ UINT8 SataP1T3M;
+
+/** Offset 0x0A5E - Port 1 Tdispatch
+ Port 1 Tdispatch.
+**/
+ UINT8 SataP1TDisp;
+
+/** Offset 0x0A5F - Port 0 Tinactive
+ Port 0 Tinactive.
+**/
+ UINT8 SataP0Tinact;
+
+/** Offset 0x0A60 - Port 0 Alternate Fast Init Tdispatch
+ Port 0 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP0TDispFinit;
+
+/** Offset 0x0A61 - Port 1 Tinactive
+ Port 1 Tinactive.
+**/
+ UINT8 SataP1Tinact;
+
+/** Offset 0x0A62 - Port 1 Alternate Fast Init Tdispatch
+ Port 1 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP1TDispFinit;
+
+/** Offset 0x0A63 - Sata Thermal Throttling Suggested Setting
+ Sata Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 SataThermalSuggestedSetting;
+
+/** Offset 0x0A64 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+ $EN_DIS
+**/
+ UINT8 PchMemoryThrottlingEnable;
+
+/** Offset 0x0A65 - Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPmsyncEnable[2];
+
+/** Offset 0x0A67 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryC0TransmitEnable[2];
+
+/** Offset 0x0A69 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPinSelection[2];
+
+/** Offset 0x0A6B - Reserved
+**/
+ UINT8 Reserved38;
+
+/** Offset 0x0A6C - Thermal Device Temperature
+ Decides the temperature.
+**/
+ UINT16 PchTemperatureHotLevel;
+
+/** Offset 0x0A6E - USB2 Port Over Current Pin
+ Describe the specific over current pin number of USB 2.0 Port N.
+**/
+ UINT8 Usb2OverCurrentPin[16];
+
+/** Offset 0x0A7E - USB3 Port Over Current Pin
+ Describe the specific over current pin number of USB 3.0 Port N.
+**/
+ UINT8 Usb3OverCurrentPin[10];
+
+/** Offset 0x0A88 - Enable xHCI LTR override
+ Enables override of recommended LTR values for xHCI
+ $EN_DIS
+**/
+ UINT8 PchUsbLtrOverrideEnable;
+
+/** Offset 0x0A89 - Reserved
+**/
+ UINT8 Reserved39[3];
+
+/** Offset 0x0A8C - xHCI High Idle Time LTR override
+ Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting
+**/
+ UINT32 PchUsbLtrHighIdleTimeOverride;
+
+/** Offset 0x0A90 - xHCI Medium Idle Time LTR override
+ Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting
+**/
+ UINT32 PchUsbLtrMediumIdleTimeOverride;
+
+/** Offset 0x0A94 - xHCI Low Idle Time LTR override
+ Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting
+**/
+ UINT32 PchUsbLtrLowIdleTimeOverride;
+
+/** Offset 0x0A98 - Enable 8254 Static Clock Gating
+ Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time
+ might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support
+ legacy OS using 8254 timer. Also enable this while S0ix is enabled.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGating;
+
+/** Offset 0x0A99 - Enable 8254 Static Clock Gating On S3
+ This is only applicable when Enable8254ClockGating is disabled. FSP will do the
+ 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This
+ avoids the SMI requirement for the programming.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGatingOnS3;
+
+/** Offset 0x0A9A - Enable TCO timer.
+ When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have
+ huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer
+ emulation must be enabled, and WDAT table must not be exposed to the OS.
+ $EN_DIS
+**/
+ UINT8 EnableTcoTimer;
+
+/** Offset 0x0A9B - Hybrid Storage Detection and Configuration Mode
+ Enables support for Hybrid storage devices. 0: Disabled; 1: Dynamic Configuration.
+ Default is 0: Disabled
+ 0: Disabled, 1: Dynamic Configuration
+**/
+ UINT8 HybridStorageMode;
+
+/** Offset 0x0A9C - Reserved
+**/
+ UINT8 Reserved40[4];
+
+/** Offset 0x0AA0 - BgpdtHash[4]
+ BgpdtHash values
+**/
+ UINT64 BgpdtHash[4];
+
+/** Offset 0x0AC0 - BiosGuardAttr
+ BiosGuardAttr default values
+**/
+ UINT32 BiosGuardAttr;
+
+/** Offset 0x0AC4 - Reserved
+**/
+ UINT8 Reserved41[4];
+
+/** Offset 0x0AC8 - BiosGuardModulePtr
+ BiosGuardModulePtr default values
+**/
+ UINT64 BiosGuardModulePtr;
+
+/** Offset 0x0AD0 - SendEcCmd
+ SendEcCmd function pointer. \n
+ @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE
+ EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode
+**/
+ UINT64 SendEcCmd;
+
+/** Offset 0x0AD8 - EcCmdProvisionEav
+ Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC
+**/
+ UINT8 EcCmdProvisionEav;
+
+/** Offset 0x0AD9 - EcCmdLock
+ EcCmdLock default values. Locks Ephemeral Authorization Value sent previously
+**/
+ UINT8 EcCmdLock;
+
+/** Offset 0x0ADA - Skip Ssid Programming.
+ When set to TRUE, silicon code will not do any SSID programming and platform code
+ needs to handle that by itself properly.
+ $EN_DIS
+**/
+ UINT8 SiSkipSsidProgramming;
+
+/** Offset 0x0ADB - Reserved
+**/
+ UINT8 Reserved42;
+
+/** Offset 0x0ADC - Change Default SVID
+ Change the default SVID used in FSP to programming internal devices. This is only
+ valid when SkipSsidProgramming is FALSE.
+**/
+ UINT16 SiCustomizedSvid;
+
+/** Offset 0x0ADE - Change Default SSID
+ Change the default SSID used in FSP to programming internal devices. This is only
+ valid when SkipSsidProgramming is FALSE.
+**/
+ UINT16 SiCustomizedSsid;
+
+/** Offset 0x0AE0 - SVID SDID table Poniter.
+ The address of the table of SVID SDID to customize each SVID SDID entry. This is
+ only valid when SkipSsidProgramming is FALSE.
+**/
+ UINT32 SiSsidTablePtr;
+
+/** Offset 0x0AE4 - Number of ssid table.
+ SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr.
+ This is only valid when SkipSsidProgramming is FALSE.
+**/
+ UINT16 SiNumberOfSsidTableEntry;
+
+/** Offset 0x0AE6 - USB2 Port Reset Message Enable
+ 0: Disable USB2 Port Reset Message; 1: Enable USB2 Port Reset Message; This must
+ be enable for USB2 Port those are paired with CPU XHCI Port
+**/
+ UINT8 PortResetMessageEnable[16];
+
+/** Offset 0x0AF6 - SATA RST Interrupt Mode
+ Allowes to choose which interrupts will be implemented by SATA controller in RAID mode.
+ 0:Msix, 1:Msi, 2:Legacy
+**/
+ UINT8 SataRstInterrupt;
+
+/** Offset 0x0AF7 - ME Unconfig on RTC clear
+ 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>.
+ 2: Cmos is clear, status unkonwn. 3: Reserved
+ 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos
+ is clear, 3: Reserved
+**/
+ UINT8 MeUnconfigOnRtcClear;
+
+/** Offset 0x0AF8 - Enforce Enhanced Debug Mode
+ Determine if ME should enter Enhanced Debug Mode. <b>0: disable</b>, 1: enable
+ $EN_DIS
+**/
+ UINT8 EnforceEDebugMode;
+
+/** Offset 0x0AF9 - Enable PS_ON.
+ PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power
+ target that will be required by the California Energy Commission (CEC). When FALSE,
+ PS_ON is to be disabled.
+ $EN_DIS
+**/
+ UINT8 PsOnEnable;
+
+/** Offset 0x0AFA - Pmc Cpu C10 Gate Pin Enable
+ Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO
+ and VccSTG rails instead of SLP_S0# pin.
+ $EN_DIS
+**/
+ UINT8 PmcCpuC10GatePinEnable;
+
+/** Offset 0x0AFB - Pch Dmi Aspm Ctrl
+ ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmL1</b>
+ 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto
+**/
+ UINT8 PchDmiAspmCtrl;
+
+/** Offset 0x0AFC - PchDmiCwbEnable
+ Central Write Buffer feature configurable and enabled by default
+ $EN_DIS
+**/
+ UINT8 PchDmiCwbEnable;
+
+/** Offset 0x0AFD - OS IDLE Mode Enable
+ Enable/Disable OS Idle Mode
+ $EN_DIS
+**/
+ UINT8 PmcOsIdleEnable;
+
+/** Offset 0x0AFE - S0ix Auto-Demotion
+ Enable/Disable the Low Power Mode Auto-Demotion Host Control feature.
+ $EN_DIS
+**/
+ UINT8 PchS0ixAutoDemotion;
+
+/** Offset 0x0AFF - Latch Events C10 Exit
+ When this bit is set to 1, SLP_S0# entry events in SLP_S0_DEBUG_REGx registers are
+ captured on C10 exit (instead of C10 entry which is default)
+ $EN_DIS
+**/
+ UINT8 PchPmLatchEventsC10Exit;
+
+/** Offset 0x0B00 - Reserved
+**/
+ UINT8 Reserved43[12];
+
+/** Offset 0x0B0C - PCIE Eq Ph3 Lane Param Cm
+ CPU_PCIE_EQ_LANE_PARAM. Coefficient C-1.
+**/
+ UINT8 CpuPcieEqPh3LaneParamCm[32];
+
+/** Offset 0x0B2C - PCIE Eq Ph3 Lane Param Cp
+ CPU_PCIE_EQ_LANE_PARAM. Coefficient C+1.
+**/
+ UINT8 CpuPcieEqPh3LaneParamCp[32];
+
+/** Offset 0x0B4C - Gen3 Root port preset values per lane
+ Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 8 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen3RootPortPreset[20];
+
+/** Offset 0x0B60 - Pcie Gen4 Root port preset values per lane
+ Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 8 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen4RootPortPreset[20];
+
+/** Offset 0x0B74 - Pcie Gen3 End port preset values per lane
+ Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 7 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen3EndPointPreset[20];
+
+/** Offset 0x0B88 - Pcie Gen4 End port preset values per lane
+ Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 7 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen4EndPointPreset[20];
+
+/** Offset 0x0B9C - Pcie Gen3 End port Hint values per lane
+ Used for programming Pcie Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 CpuPcieGen3EndPointHint[20];
+
+/** Offset 0x0BB0 - Pcie Gen4 End port Hint values per lane
+ Used for programming Pcie Gen4 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 CpuPcieGen4EndPointHint[20];
+
+/** Offset 0x0BC4 - CPU PCIe Fia Programming
+ Load Fia configuration if enable. 0: Disable; 1: Enable(Default).
+ $EN_DIS
+**/
+ UINT8 CpuPcieFiaProgramming;
+
+/** Offset 0x0BC5 - CPU PCIe RootPort Clock Gating
+ Describes whether the PCI Express Clock Gating for each root port is enabled by
+ platform modules. 0: Disable; 1: Enable(Default).
+ $EN_DIS
+**/
+ UINT8 CpuPcieClockGating[4];
+
+/** Offset 0x0BC9 - CPU PCIe RootPort Power Gating
+ Describes whether the PCI Express Power Gating for each root port is enabled by
+ platform modules. 0: Disable; 1: Enable(Default).
+ $EN_DIS
+**/
+ UINT8 CpuPciePowerGating[4];
+
+/** Offset 0x0BCD - PCIE Compliance Test Mode
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ $EN_DIS
+**/
+ UINT8 CpuPcieComplianceTestMode;
+
+/** Offset 0x0BCE - PCIE Enable Peer Memory Write
+ This member describes whether Peer Memory Writes are enabled on the platform.
+ $EN_DIS
+**/
+ UINT8 CpuPcieEnablePeerMemoryWrite;
+
+/** Offset 0x0BCF - PCIE Rp Function Swap
+ Allows BIOS to use root port function number swapping when root port of function
+ 0 is disabled.
+ $EN_DIS
+**/
+ UINT8 CpuPcieRpFunctionSwap;
+
+/** Offset 0x0BD0 - PCI Express Slot Selection
+ Select the PCIe M2 or CEMx4 slot.0: CEMx4 slot; 1: M2 slot(Default).
+ $EN_DIS
+**/
+ UINT8 CpuPcieSlotSelection;
+
+/** Offset 0x0BD1 - Reserved
+**/
+ UINT8 Reserved44[3];
+
+/** Offset 0x0BD4 - CPU PCIE device override table pointer
+ The PCIe device table is being used to override PCIe device ASPM settings. This
+ is a pointer points to a 32bit address. And it's only used in PostMem phase. Please
+ refer to CPU_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId
+ must be 0.
+**/
+ UINT32 CpuPcieDeviceOverrideTablePtr;
+
+/** Offset 0x0BD8 - Enable PCIE RP HotPlug
+ Indicate whether the root port is hot plug available.
+**/
+ UINT8 CpuPcieRpHotPlug[4];
+
+/** Offset 0x0BDC - Enable PCIE RP Pm Sci
+ Indicate whether the root port power manager SCI is enabled.
+**/
+ UINT8 CpuPcieRpPmSci[4];
+
+/** Offset 0x0BE0 - Enable PCIE RP Transmitter Half Swing
+ Indicate whether the Transmitter Half Swing is enabled.
+**/
+ UINT8 CpuPcieRpTransmitterHalfSwing[4];
+
+/** Offset 0x0BE4 - PCIE RP Access Control Services Extended Capability
+ Enable/Disable PCIE RP Access Control Services Extended Capability
+**/
+ UINT8 CpuPcieRpAcsEnabled[4];
+
+/** Offset 0x0BE8 - PCIE RP Clock Power Management
+ Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
+ can still be controlled by L1 PM substates mechanism
+**/
+ UINT8 CpuPcieRpEnableCpm[4];
+
+/** Offset 0x0BEC - PCIE RP Advanced Error Report
+ Indicate whether the Advanced Error Reporting is enabled.
+**/
+ UINT8 CpuPcieRpAdvancedErrorReporting[4];
+
+/** Offset 0x0BF0 - PCIE RP Unsupported Request Report
+ Indicate whether the Unsupported Request Report is enabled.
+**/
+ UINT8 CpuPcieRpUnsupportedRequestReport[4];
+
+/** Offset 0x0BF4 - PCIE RP Fatal Error Report
+ Indicate whether the Fatal Error Report is enabled.
+**/
+ UINT8 CpuPcieRpFatalErrorReport[4];
+
+/** Offset 0x0BF8 - PCIE RP No Fatal Error Report
+ Indicate whether the No Fatal Error Report is enabled.
+**/
+ UINT8 CpuPcieRpNoFatalErrorReport[4];
+
+/** Offset 0x0BFC - PCIE RP Correctable Error Report
+ Indicate whether the Correctable Error Report is enabled.
+**/
+ UINT8 CpuPcieRpCorrectableErrorReport[4];
+
+/** Offset 0x0C00 - PCIE RP System Error On Fatal Error
+ Indicate whether the System Error on Fatal Error is enabled.
+**/
+ UINT8 CpuPcieRpSystemErrorOnFatalError[4];
+
+/** Offset 0x0C04 - PCIE RP System Error On Non Fatal Error
+ Indicate whether the System Error on Non Fatal Error is enabled.
+**/
+ UINT8 CpuPcieRpSystemErrorOnNonFatalError[4];
+
+/** Offset 0x0C08 - PCIE RP System Error On Correctable Error
+ Indicate whether the System Error on Correctable Error is enabled.
+**/
+ UINT8 CpuPcieRpSystemErrorOnCorrectableError[4];
+
+/** Offset 0x0C0C - PCIE RP Max Payload
+ Max Payload Size supported, Default 128B, see enum CPU_PCIE_MAX_PAYLOAD.
+**/
+ UINT8 CpuPcieRpMaxPayload[4];
+
+/** Offset 0x0C10 - DPC for PCIE RP Mask
+ Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT8 CpuPcieRpDpcEnabled[4];
+
+/** Offset 0x0C14 - DPC Extensions PCIE RP Mask
+ Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit
+ for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT8 CpuPcieRpDpcExtensionsEnabled[4];
+
+/** Offset 0x0C18 - CPU PCIe root port connection type
+ 0: built-in device, 1:slot
+**/
+ UINT8 CpuPcieRpSlotImplemented[4];
+
+/** Offset 0x0C1C - PCIE RP Gen3 Equalization Phase Method
+ PCIe Gen3 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
+ 1: hardware equalization; 4: Fixed Coeficients.
+**/
+ UINT8 CpuPcieRpGen3EqPh3Method[4];
+
+/** Offset 0x0C20 - PCIE RP Gen4 Equalization Phase Method
+ PCIe Gen4 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
+ 1: hardware equalization; 4: Fixed Coeficients.
+**/
+ UINT8 CpuPcieRpGen4EqPh3Method[4];
+
+/** Offset 0x0C24 - PCIE RP Physical Slot Number
+ Indicates the slot number for the root port. Default is the value as root port index.
+**/
+ UINT8 CpuPcieRpPhysicalSlotNumber[4];
+
+/** Offset 0x0C28 - PCIE RP Aspm
+ The ASPM configuration of the root port (see: CPU_PCIE_ASPM_CONTROL).0: Disable;
+ 1: CpuPcieAspmL0s; 2: CpuPcieAspmL1; 3:CpuPcieAspmL0sL1(Default)
+**/
+ UINT8 CpuPcieRpAspm[4];
+
+/** Offset 0x0C2C - PCIE RP L1 Substates
+ The L1 Substates configuration of the root port (see: CPU_PCIE_L1SUBSTATES_CONTROL).
+ Default is CpuPcieL1SubstatesL1_1_2.
+**/
+ UINT8 CpuPcieRpL1Substates[4];
+
+/** Offset 0x0C30 - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 CpuPcieRpLtrEnable[4];
+
+/** Offset 0x0C34 - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 CpuPcieRpLtrConfigLock[4];
+
+/** Offset 0x0C38 - PTM for PCIE RP Mask
+ Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT8 CpuPcieRpPtmEnabled[4];
+
+/** Offset 0x0C3C - PCIE RP Detect Timeout Ms
+ The number of milliseconds within 0~65535 in reference code will wait for link to
+ exit Detect state for enabled ports before assuming there is no device and potentially
+ disabling the port.
+**/
+ UINT16 CpuPcieRpDetectTimeoutMs[4];
+
+/** Offset 0x0C44 - Multi-VC for PCIE RP Mask
+ Enable/disable Multiple Virtual Channel for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT8 CpuPcieRpMultiVcEnabled[4];
+
+/** Offset 0x0C48 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate3UniqTranEnable[10];
+
+/** Offset 0x0C52 - USB 3.0 TX Output Unique Transition Bit Scale for rate 3
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], <b>Default
+ = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate3UniqTran[10];
+
+/** Offset 0x0C5C - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate2UniqTranEnable[10];
+
+/** Offset 0x0C66 - USB 3.0 TX Output Unique Transition Bit Scale for rate 2
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8],
+ <b>Default = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate2UniqTran[10];
+
+/** Offset 0x0C70 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate1UniqTranEnable[10];
+
+/** Offset 0x0C7A - USB 3.0 TX Output Unique Transition Bit Scale for rate 1
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16],
+ <b>Default = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate1UniqTran[10];
+
+/** Offset 0x0C84 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate0UniqTranEnable[10];
+
+/** Offset 0x0C8E - USB 3.0 TX Output Unique Transition Bit Scale for rate 0
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24],
+ <b>Default = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate0UniqTran[10];
+
+/** Offset 0x0C98 - Skip PAM regsiter lock
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ $EN_DIS
+**/
+ UINT8 SkipPamLock;
+
+/** Offset 0x0C99 - EDRAM Test Mode
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode
+**/
+ UINT8 EdramTestMode;
+
+/** Offset 0x0C9A - Enable/Disable IGFX RenderStandby
+ Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby
+ $EN_DIS
+**/
+ UINT8 RenderStandby;
+
+/** Offset 0x0C9B - Enable/Disable IGFX PmSupport
+ Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport
+ $EN_DIS
+**/
+ UINT8 PmSupport;
+
+/** Offset 0x0C9C - Enable/Disable CdynmaxClamp
+ Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp
+ $EN_DIS
+**/
+ UINT8 CdynmaxClampEnable;
+
+/** Offset 0x0C9D - GT Frequency Limit
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+**/
+ UINT8 GtFreqMax;
+
+/** Offset 0x0C9E - Disable Turbo GT
+ 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency
+ $EN_DIS
+**/
+ UINT8 DisableTurboGt;
+
+/** Offset 0x0C9F - Enable/Disable CdClock Init
+ Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full
+ CD clock if not initialized by Gfx PEIM
+ $EN_DIS
+**/
+ UINT8 SkipCdClockInit;
+
+/** Offset 0x0CA0 - Enable RC1p frequency request to PMA (provided all other conditions are met)
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 RC1pFreqEnable;
+
+/** Offset 0x0CA1 - Enable TSN Multi-VC
+ Enable/disable Multi Virtual Channels(VC) in TSN.
+ $EN_DIS
+**/
+ UINT8 PchTsnMultiVcEnable;
+
+/** Offset 0x0CA2 - Reserved
+**/
+ UINT8 Reserved45[2];
+
+/** Offset 0x0CA4 - LogoPixelHeight Address
+ Address of LogoPixelHeight
+**/
+ UINT32 LogoPixelHeight;
+
+/** Offset 0x0CA8 - LogoPixelWidth Address
+ Address of LogoPixelWidth
+**/
+ UINT32 LogoPixelWidth;
+
+/** Offset 0x0CAC - Reserved
+**/
+ UINT8 Reserved46[5];
+
+/** Offset 0x0CB1 - RSR feature
+ Enable or Disable RSR feature; 0: Disable; <b>1: Enable </b>
+ $EN_DIS
+**/
+ UINT8 EnableRsr;
+
+/** Offset 0x0CB2 - Reserved
+**/
+ UINT8 Reserved47[4];
+
+/** Offset 0x0CB6 - Enable or Disable HWP
+ Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b>
+ 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 Hwp;
+
+/** Offset 0x0CB7 - Hardware Duty Cycle Control
+ Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 HdcControl;
+
+/** Offset 0x0CB8 - Package Long duration turbo mode time
+ Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds)
+ 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PowerLimit1Time;
+
+/** Offset 0x0CB9 - Short Duration Turbo Mode
+ Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PowerLimit2;
+
+/** Offset 0x0CBA - Turbo settings Lock
+ Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 TurboPowerLimitLock;
+
+/** Offset 0x0CBB - Package PL3 time window
+ Package PL3 time window range for this policy from 0 to 64ms
+**/
+ UINT8 PowerLimit3Time;
+
+/** Offset 0x0CBC - Package PL3 Duty Cycle
+ Package PL3 Duty Cycle; Valid Range is 0 to 100
+**/
+ UINT8 PowerLimit3DutyCycle;
+
+/** Offset 0x0CBD - Package PL3 Lock
+ Package PL3 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit3Lock;
+
+/** Offset 0x0CBE - Package PL4 Lock
+ Package PL4 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit4Lock;
+
+/** Offset 0x0CBF - TCC Activation Offset
+ TCC Activation Offset. Offset from factory set TCC activation temperature at which
+ the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation
+ Temperature, in volts.For SKL Y SKU, the recommended default for this policy is
+ <b>10</b>, For all other SKUs the recommended default are <b>0</b>
+**/
+ UINT8 TccActivationOffset;
+
+/** Offset 0x0CC0 - Tcc Offset Clamp Enable/Disable
+ Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle
+ below P1.For SKL Y SKU, the recommended default for this policy is <b>1: Enabled</b>,
+ For all other SKUs the recommended default are <b>0: Disabled</b>.
+ $EN_DIS
+**/
+ UINT8 TccOffsetClamp;
+
+/** Offset 0x0CC1 - Tcc Offset Lock
+ Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature
+ target; <b>0: Disabled</b>; 1: Enabled.
+ $EN_DIS
+**/
+ UINT8 TccOffsetLock;
+
+/** Offset 0x0CC2 - Custom Ratio State Entries
+ The number of custom ratio state entries, ranges from 0 to 40 for a valid custom
+ ratio table.Sets the number of custom P-states. At least 2 states must be present
+**/
+ UINT8 NumberOfEntries;
+
+/** Offset 0x0CC3 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128
+**/
+ UINT8 Custom1PowerLimit1Time;
+
+/** Offset 0x0CC4 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255
+**/
+ UINT8 Custom1TurboActivationRatio;
+
+/** Offset 0x0CC5 - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom1ConfigTdpControl;
+
+/** Offset 0x0CC6 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128
+**/
+ UINT8 Custom2PowerLimit1Time;
+
+/** Offset 0x0CC7 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255
+**/
+ UINT8 Custom2TurboActivationRatio;
+
+/** Offset 0x0CC8 - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom2ConfigTdpControl;
+
+/** Offset 0x0CC9 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128
+**/
+ UINT8 Custom3PowerLimit1Time;
+
+/** Offset 0x0CCA - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255
+**/
+ UINT8 Custom3TurboActivationRatio;
+
+/** Offset 0x0CCB - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom3ConfigTdpControl;
+
+/** Offset 0x0CCC - ConfigTdp mode settings Lock
+ Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ConfigTdpLock;
+
+/** Offset 0x0CCD - Load Configurable TDP SSDT
+ Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ConfigTdpBios;
+
+/** Offset 0x0CCE - PL1 Enable value
+ PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit1;
+
+/** Offset 0x0CCF - PL1 timewindow
+ PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16
+ , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PsysPowerLimit1Time;
+
+/** Offset 0x0CD0 - PL2 Enable Value
+ PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit2;
+
+/** Offset 0x0CD1 - Enable or Disable MLC Streamer Prefetcher
+ Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MlcStreamerPrefetcher;
+
+/** Offset 0x0CD2 - Enable or Disable MLC Spatial Prefetcher
+ Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 MlcSpatialPrefetcher;
+
+/** Offset 0x0CD3 - Enable or Disable Monitor /MWAIT instructions
+ Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MonitorMwaitEnable;
+
+/** Offset 0x0CD4 - Enable or Disable initialization of machine check registers
+ Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MachineCheckEnable;
+
+/** Offset 0x0CD5 - AP Idle Manner of waiting for SIPI
+ AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop.
+ 1: HALT loop, 2: MWAIT loop, 3: RUN loop
+**/
+ UINT8 ApIdleManner;
+
+/** Offset 0x0CD6 - Control on Processor Trace output scheme
+ Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output.
+ 0: Single Range Output, 1: ToPA Output
+**/
+ UINT8 ProcessorTraceOutputScheme;
+
+/** Offset 0x0CD7 - Enable or Disable Processor Trace feature
+ Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcessorTraceEnable;
+
+/** Offset 0x0CD8 - Enable or Disable Intel SpeedStep Technology
+ Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Eist;
+
+/** Offset 0x0CD9 - Enable or Disable Energy Efficient P-state
+ Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientPState;
+
+/** Offset 0x0CDA - Enable or Disable Energy Efficient Turbo
+ Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientTurbo;
+
+/** Offset 0x0CDB - Enable or Disable T states
+ Enable or Disable T states; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 TStates;
+
+/** Offset 0x0CDC - Enable or Disable Bi-Directional PROCHOT#
+ Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 BiProcHot;
+
+/** Offset 0x0CDD - Enable or Disable PROCHOT# signal being driven externally
+ Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DisableProcHotOut;
+
+/** Offset 0x0CDE - Enable or Disable PROCHOT# Response
+ Enable or Disable PROCHOT# Response; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 ProcHotResponse;
+
+/** Offset 0x0CDF - Enable or Disable VR Thermal Alert
+ Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 DisableVrThermalAlert;
+
+/** Offset 0x0CE0 - Enable or Disable Thermal Reporting
+ Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 EnableAllThermalFunctions;
+
+/** Offset 0x0CE1 - Enable or Disable Thermal Monitor
+ Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 ThermalMonitor;
+
+/** Offset 0x0CE2 - Enable or Disable CPU power states (C-states)
+ Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Cx;
+
+/** Offset 0x0CE3 - Configure C-State Configuration Lock
+ Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 PmgCstCfgCtrlLock;
+
+/** Offset 0x0CE4 - Enable or Disable Enhanced C-states
+ Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1e;
+
+/** Offset 0x0CE5 - Enable or Disable Package Cstate Demotion
+ Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PkgCStateDemotion;
+
+/** Offset 0x0CE6 - Enable or Disable Package Cstate UnDemotion
+ Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PkgCStateUnDemotion;
+
+/** Offset 0x0CE7 - Enable or Disable CState-Pre wake
+ Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 CStatePreWake;
+
+/** Offset 0x0CE8 - Enable or Disable TimedMwait Support.
+ Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 TimedMwait;
+
+/** Offset 0x0CE9 - Enable or Disable IO to MWAIT redirection
+ Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CstCfgCtrIoMwaitRedirection;
+
+/** Offset 0x0CEA - Set the Max Pkg Cstate
+ Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep
+ C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S ,
+ 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto
+**/
+ UINT8 PkgCStateLimit;
+
+/** Offset 0x0CEB - TimeUnit for C-State Latency Control0
+ TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl0TimeUnit;
+
+/** Offset 0x0CEC - TimeUnit for C-State Latency Control1
+ TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl1TimeUnit;
+
+/** Offset 0x0CED - TimeUnit for C-State Latency Control2
+ TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl2TimeUnit;
+
+/** Offset 0x0CEE - TimeUnit for C-State Latency Control3
+ TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl3TimeUnit;
+
+/** Offset 0x0CEF - TimeUnit for C-State Latency Control4
+ Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl4TimeUnit;
+
+/** Offset 0x0CF0 - TimeUnit for C-State Latency Control5
+ TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl5TimeUnit;
+
+/** Offset 0x0CF1 - Interrupt Redirection Mode Select
+ Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7:
+ No change.
+**/
+ UINT8 PpmIrmSetting;
+
+/** Offset 0x0CF2 - Lock prochot configuration
+ Lock prochot configuration Enable/Disable; 0: Disable;<b> 1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 ProcHotLock;
+
+/** Offset 0x0CF3 - Configuration for boot TDP selection
+ Deprecated. Move to premem.
+**/
+ UINT8 ConfigTdpLevel;
+
+/** Offset 0x0CF4 - Max P-State Ratio
+ Max P-State Ratio, Valid Range 0 to 0x7F
+**/
+ UINT8 MaxRatio;
+
+/** Offset 0x0CF5 - P-state ratios for custom P-state table
+ P-state ratios for custom P-state table. NumberOfEntries has valid range between
+ 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries]
+ are configurable. Valid Range of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatio[40];
+
+/** Offset 0x0D1D - P-state ratios for max 16 version of custom P-state table
+ P-state ratios for max 16 version of custom P-state table. This table is used for
+ OS versions limited to a max of 16 P-States. If the first entry of this table is
+ 0, or if Number of Entries is 16 or less, then this table will be ignored, and
+ up to the top 16 values of the StateRatio table will be used instead. Valid Range
+ of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatioMax16[16];
+
+/** Offset 0x0D2D - Reserved
+**/
+ UINT8 Reserved48;
+
+/** Offset 0x0D2E - Platform Power Pmax
+ PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
+ Range 0-1024 Watts. Value of 800 = 100W
+**/
+ UINT16 PsysPmax;
+
+/** Offset 0x0D30 - Interrupt Response Time Limit of C-State LatencyContol1
+ Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl1Irtl;
+
+/** Offset 0x0D32 - Interrupt Response Time Limit of C-State LatencyContol2
+ Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl2Irtl;
+
+/** Offset 0x0D34 - Interrupt Response Time Limit of C-State LatencyContol3
+ Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl3Irtl;
+
+/** Offset 0x0D36 - Interrupt Response Time Limit of C-State LatencyContol4
+ Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl4Irtl;
+
+/** Offset 0x0D38 - Interrupt Response Time Limit of C-State LatencyContol5
+ Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl5Irtl;
+
+/** Offset 0x0D3A - Reserved
+**/
+ UINT8 Reserved49[2];
+
+/** Offset 0x0D3C - Package Long duration turbo mode power limit
+ Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.
+ Valid Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit1;
+
+/** Offset 0x0D40 - Package Short duration turbo mode power limit
+ Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit2Power;
+
+/** Offset 0x0D44 - Package PL3 power limit
+ Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit3;
+
+/** Offset 0x0D48 - Package PL4 power limit
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit4;
+
+/** Offset 0x0D4C - Tcc Offset Time Window for RATL
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 TccOffsetTimeWindowForRatl;
+
+/** Offset 0x0D50 - Short term Power Limit value for custom cTDP level 1
+ Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit1;
+
+/** Offset 0x0D54 - Long term Power Limit value for custom cTDP level 1
+ Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit2;
+
+/** Offset 0x0D58 - Short term Power Limit value for custom cTDP level 2
+ Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit1;
+
+/** Offset 0x0D5C - Long term Power Limit value for custom cTDP level 2
+ Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit2;
+
+/** Offset 0x0D60 - Short term Power Limit value for custom cTDP level 3
+ Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit1;
+
+/** Offset 0x0D64 - Long term Power Limit value for custom cTDP level 3
+ Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit2;
+
+/** Offset 0x0D68 - Platform PL1 power
+ Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit1Power;
+
+/** Offset 0x0D6C - Platform PL2 power
+ Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit2Power;
+
+/** Offset 0x0D70 - Race To Halt
+ Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency
+ in order to enter pkg C-State faster to reduce overall power. (RTH is controlled
+ through MSR 1FC bit 20)Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 RaceToHalt;
+
+/** Offset 0x0D71 - Set Three Strike Counter Disable
+ False (default): Three Strike counter will be incremented and True: Prevents Three
+ Strike counter from incrementing; <b>0: False</b>; 1: True.
+ 0: False, 1: True
+**/
+ UINT8 ThreeStrikeCounterDisable;
+
+/** Offset 0x0D72 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT
+ Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 HwpInterruptControl;
+
+/** Offset 0x0D73 - Reserved
+**/
+ UINT8 Reserved50[4];
+
+/** Offset 0x0D77 - Intel Turbo Boost Max Technology 3.0
+ Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b>
+ $EN_DIS
+**/
+ UINT8 EnableItbm;
+
+/** Offset 0x0D78 - Enable or Disable C1 Cstate Demotion
+ Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateAutoDemotion;
+
+/** Offset 0x0D79 - Enable or Disable C1 Cstate UnDemotion
+ Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateUnDemotion;
+
+/** Offset 0x0D7A - Minimum Ring ratio limit override
+ Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MinRingRatioLimit;
+
+/** Offset 0x0D7B - Maximum Ring ratio limit override
+ Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MaxRingRatioLimit;
+
+/** Offset 0x0D7C - Enable or Disable Per Core P State OS control
+ Enable or Disable Per Core P State OS control. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnablePerCorePState;
+
+/** Offset 0x0D7D - Enable or Disable HwP Autonomous Per Core P State OS control
+ Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; <b>1:
+ Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableHwpAutoPerCorePstate;
+
+/** Offset 0x0D7E - Enable or Disable HwP Autonomous EPP Grouping
+ Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableHwpAutoEppGrouping;
+
+/** Offset 0x0D7F - Enable or Disable EPB override over PECI
+ Enable or Disable EPB override over PECI. <b>0: Disable;</b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 EnableEpbPeciOverride;
+
+/** Offset 0x0D80 - Enable or Disable Fast MSR for IA32_HWP_REQUEST
+ Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable;<b> 1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableFastMsrHwpReq;
+
+/** Offset 0x0D81 - Enable Configurable TDP
+ Applies TDP initialization settings based on non-cTDP or cTDP.; 0: Applies to non-cTDP;
+ <b>1: Applies to cTDP</b>
+ $EN_DIS
+**/
+ UINT8 ApplyConfigTdp;
+
+/** Offset 0x0D82 - Reserved
+**/
+ UINT8 Reserved51;
+
+/** Offset 0x0D83 - Dual Tau Boost
+ Enable, Disable Dual Tau Boost feature. This is only applicable for Desktop; <b>0:
+ Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 DualTauBoost;
+
+/** Offset 0x0D84 - Reserved
+**/
+ UINT8 Reserved52[32];
+
+/** Offset 0x0DA4 - End of Post message
+ Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
+ EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE
+ 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved
+**/
+ UINT8 EndOfPostMessage;
+
+/** Offset 0x0DA5 - D0I3 Setting for HECI Disable
+ Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all
+ HECI devices
+ $EN_DIS
+**/
+ UINT8 DisableD0I3SettingForHeci;
+
+/** Offset 0x0DA6 - Mctp Broadcast Cycle
+ Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 MctpBroadcastCycle;
+
+/** Offset 0x0DA7 - Enable LOCKDOWN SMI
+ Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
+ $EN_DIS
+**/
+ UINT8 PchLockDownGlobalSmi;
+
+/** Offset 0x0DA8 - Enable LOCKDOWN BIOS Interface
+ Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register.
+ $EN_DIS
+**/
+ UINT8 PchLockDownBiosInterface;
+
+/** Offset 0x0DA9 - Unlock all GPIO pads
+ Force all GPIO pads to be unlocked for debug purpose.
+ $EN_DIS
+**/
+ UINT8 PchUnlockGpioPads;
+
+/** Offset 0x0DAA - PCH Unlock SideBand access
+ The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before
+ 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access.
+ $EN_DIS
+**/
+ UINT8 PchSbAccessUnlock;
+
+/** Offset 0x0DAB - Reserved
+**/
+ UINT8 Reserved53;
+
+/** Offset 0x0DAC - PCIE RP Ltr Max Snoop Latency
+ Latency Tolerance Reporting, Max Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxSnoopLatency[28];
+
+/** Offset 0x0DE4 - PCIE RP Ltr Max No Snoop Latency
+ Latency Tolerance Reporting, Max Non-Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxNoSnoopLatency[28];
+
+/** Offset 0x0E1C - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMode[28];
+
+/** Offset 0x0E38 - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMultiplier[28];
+
+/** Offset 0x0E54 - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 PcieRpSnoopLatencyOverrideValue[28];
+
+/** Offset 0x0E8C - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMode[28];
+
+/** Offset 0x0EA8 - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[28];
+
+/** Offset 0x0EC4 - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 PcieRpNonSnoopLatencyOverrideValue[28];
+
+/** Offset 0x0EFC - PCIE RP Slot Power Limit Scale
+ Specifies scale used for slot power limit value. Leave as 0 to set to default.
+**/
+ UINT8 PcieRpSlotPowerLimitScale[28];
+
+/** Offset 0x0F18 - PCIE RP Slot Power Limit Value
+ Specifies upper limit on power supplie by slot. Leave as 0 to set to default.
+**/
+ UINT16 PcieRpSlotPowerLimitValue[28];
+
+/** Offset 0x0F50 - PCIE RP Enable Port8xh Decode
+ This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePort8xhDecode;
+
+/** Offset 0x0F51 - PCIE Port8xh Decode Port Index
+ The Index of PCIe Port that is selected for Port8xh Decode (0 Based).
+**/
+ UINT8 PchPciePort8xhDecodePortIndex;
+
+/** Offset 0x0F52 - PCH Energy Reporting
+ Disable/Enable PCH to CPU energy report feature.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableEnergyReport;
+
+/** Offset 0x0F53 - PCH Sata Test Mode
+ Allow entrance to the PCH SATA test modes.
+ $EN_DIS
+**/
+ UINT8 SataTestMode;
+
+/** Offset 0x0F54 - PCH USB OverCurrent mapping lock enable
+ If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning
+ that OC mapping data will be consumed by xHCI and OC mapping registers will be locked.
+ $EN_DIS
+**/
+ UINT8 PchXhciOcLock;
+
+/** Offset 0x0F55 - Low Power Mode Enable/Disable config mask
+ Configure if respective S0i2/3 sub-states are to be supported. Each bit corresponds
+ to one sub-state (LPMx - BITx): LPM0-s0i2.0, LPM1-s0i2.1, LPM2-s0i2.2, LPM3-s0i3.0,
+ LPM4-s0i3.1, LPM5-s0i3.2, LPM6-s0i3.3, LPM7-s0i3.4.
+**/
+ UINT8 PmcLpmS0ixSubStateEnableMask;
+
+/** Offset 0x0F56 - PCIE RP Ltr Max Snoop Latency
+ Latency Tolerance Reporting, Max Snoop Latency.
+**/
+ UINT16 CpuPcieRpLtrMaxSnoopLatency[4];
+
+/** Offset 0x0F5E - PCIE RP Ltr Max No Snoop Latency
+ Latency Tolerance Reporting, Max Non-Snoop Latency.
+**/
+ UINT16 CpuPcieRpLtrMaxNoSnoopLatency[4];
+
+/** Offset 0x0F66 - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 CpuPcieRpSnoopLatencyOverrideMode[4];
+
+/** Offset 0x0F6A - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 CpuPcieRpSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x0F6E - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 CpuPcieRpSnoopLatencyOverrideValue[4];
+
+/** Offset 0x0F76 - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 CpuPcieRpNonSnoopLatencyOverrideMode[4];
+
+/** Offset 0x0F7A - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 CpuPcieRpNonSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x0F7E - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 CpuPcieRpNonSnoopLatencyOverrideValue[4];
+
+/** Offset 0x0F86 - PCIE RP Upstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
+**/
+ UINT8 CpuPcieRpGen3Uptp[4];
+
+/** Offset 0x0F8A - PCIE RP Downstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
+**/
+ UINT8 CpuPcieRpGen3Dptp[4];
+
+/** Offset 0x0F8E - PCIE RP Upstream Port Transmiter Preset
+ Used during Gen4 Link Equalization. Used for all lanes. Default is 8.
+**/
+ UINT8 CpuPcieRpGen4Uptp[4];
+
+/** Offset 0x0F92 - PCIE RP Downstream Port Transmiter Preset
+ Used during Gen4 Link Equalization. Used for all lanes. Default is 9.
+**/
+ UINT8 CpuPcieRpGen4Dptp[4];
+
+/** Offset 0x0F96 - Reserved
+**/
+ UINT8 Reserved54[16];
+
+/** Offset 0x0FA6 - FOMS Control Policy
+ Choose the Foms Control Policy, <b>Default = 0 </b>
+ 0: Auto, 1: Gen3 Foms, 2: Gen4 Foms, 3: Gen3 and Gen4 Foms
+**/
+ UINT8 CpuPcieFomsCp[4];
+
+/** Offset 0x0FAA - PMC C10 dynamic threshold dajustment enable
+ Set if you want to enable PMC C10 dynamic threshold adjustment. Only works on supported SKUs
+ $EN_DIS
+**/
+ UINT8 PmcC10DynamicThresholdAdjustment;
+
+/** Offset 0x0FAB - P2P mode for PCIE RP
+ Enable/disable peer to peer mode for PCIE Root Ports. 0: Disable, 1: Enable.
+ 0: Disable, 1: Enable
+**/
+ UINT8 CpuPcieRpPeerToPeerMode[4];
+
+/** Offset 0x0FAF - Reserved
+**/
+ UINT8 Reserved55[33];
+
+/** Offset 0x0FD0 - FspEventHandler
+ <b>Optional</b> pointer to the boot loader's implementation of FSP_EVENT_HANDLER.
+**/
+ UINT32 FspEventHandler;
+
+/** Offset 0x0FD4 - Enable eMMC Controller
+ Enable/disable eMMC Controller.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcEnabled;
+
+/** Offset 0x0FD5 - Enable eMMC HS400 Mode
+ Enable eMMC HS400 Mode.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcHs400Enabled;
+
+/** Offset 0x0FD6 - Use DLL values from policy
+ Set if FSP should use HS400 DLL values from policy
+ $EN_DIS
+**/
+ UINT8 EmmcUseCustomDlls;
+
+/** Offset 0x0FD7 - Reserved
+**/
+ UINT8 Reserved56;
+
+/** Offset 0x0FD8 - Emmc Tx CMD Delay control register value
+ Please see Tx CMD Delay Control register definition for help
+**/
+ UINT32 EmmcTxCmdDelayRegValue;
+
+/** Offset 0x0FDC - Emmc Tx DATA Delay control 1 register value
+ Please see Tx DATA Delay control 1 register definition for help
+**/
+ UINT32 EmmcTxDataDelay1RegValue;
+
+/** Offset 0x0FE0 - Emmc Tx DATA Delay control 2 register value
+ Please see Tx DATA Delay control 2 register definition for help
+**/
+ UINT32 EmmcTxDataDelay2RegValue;
+
+/** Offset 0x0FE4 - Emmc Rx CMD + DATA Delay control 1 register value
+ Please see Rx CMD + DATA Delay control 1 register definition for help
+**/
+ UINT32 EmmcRxCmdDataDelay1RegValue;
+
+/** Offset 0x0FE8 - Emmc Rx CMD + DATA Delay control 2 register value
+ Please see Rx CMD + DATA Delay control 2 register definition for help
+**/
+ UINT32 EmmcRxCmdDataDelay2RegValue;
+
+/** Offset 0x0FEC - Emmc Rx Strobe Delay control register value
+ Please see Rx Strobe Delay control register definition for help
+**/
+ UINT32 EmmcRxStrobeDelayRegValue;
+
+/** Offset 0x0FF0 - Reserved
+**/
+ UINT8 Reserved57[69];
+
+/** Offset 0x1035 - Enable VMD Global Mapping
+ Enable/disable to VMD controller.0: Disable; 1: Enable(Default)
+ $EN_DIS
+**/
+ UINT8 VmdGlobalMapping;
+
+/** Offset 0x1036 - Reserved
+**/
+ UINT8 Reserved58[138];
+} FSP_S_CONFIG;
+
+/** Fsp S UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+ FSP_UPD_HEADER FspUpdHeader;
+
+/** Offset 0x0020
+**/
+ FSPS_ARCH_UPD FspsArchUpd;
+
+/** Offset 0x0040
+**/
+ FSP_S_CONFIG FspsConfig;
+
+/** Offset 0x10C0
+**/
+ UINT8 UnusedUpdSpace44[6];
+
+/** Offset 0x10C6
+**/
+ UINT16 UpdTerminator;
+} FSPS_UPD;
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/twinlake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/twinlake/MemInfoHob.h
new file mode 100644
index 000000000000..6df3ae538c09
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/twinlake/MemInfoHob.h
@@ -0,0 +1,320 @@
+/** @file
+ This file contains definitions required for creation of
+ Memory S3 Save data, Memory Info data and Memory Platform
+ data hobs.
+
+ @copyright
+ Copyright (c) 1999 - 2024, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available under
+ the terms and conditions of the BSD License that accompanies this distribution.
+ The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+@par Specification Reference:
+**/
+#ifndef _MEM_INFO_HOB_H_
+#define _MEM_INFO_HOB_H_
+
+
+#pragma pack (push, 1)
+
+extern EFI_GUID gSiMemoryS3DataGuid;
+extern EFI_GUID gSiMemoryInfoDataGuid;
+extern EFI_GUID gSiMemoryPlatformDataGuid;
+
+#define MAX_NODE 2
+#define MAX_CH 4
+#define MAX_DIMM 2
+// Must match definitions in
+// Intel\ClientOneSiliconPkg\IpBlock\MemoryInit\Mtl\Include\MrcInterface.h
+#define HOB_MAX_SAGV_POINTS 4
+
+///
+/// Host reset states from MRC.
+///
+#define WARM_BOOT 2
+
+#define R_MC_CHNL_RANK_PRESENT 0x7C
+#define B_RANK0_PRS BIT0
+#define B_RANK1_PRS BIT1
+#define B_RANK2_PRS BIT4
+#define B_RANK3_PRS BIT5
+
+// @todo remove and use the MdePkg\Include\Pi\PiHob.h
+#if !defined(_PEI_HOB_H_) && !defined(__PI_HOB_H__)
+#ifndef __HOB__H__
+typedef struct _EFI_HOB_GENERIC_HEADER {
+ UINT16 HobType;
+ UINT16 HobLength;
+ UINT32 Reserved;
+} EFI_HOB_GENERIC_HEADER;
+
+typedef struct _EFI_HOB_GUID_TYPE {
+ EFI_HOB_GENERIC_HEADER Header;
+ EFI_GUID Name;
+ ///
+ /// Guid specific data goes here
+ ///
+} EFI_HOB_GUID_TYPE;
+#endif
+#endif
+
+///
+/// Defines taken from MRC so avoid having to include MrcInterface.h
+///
+
+//
+// Matches MAX_SPD_SAVE define in MRC
+//
+#ifndef MAX_SPD_SAVE
+#define MAX_SPD_SAVE 29
+#endif
+
+//
+// MRC version description.
+//
+typedef struct {
+ UINT8 Major; ///< Major version number
+ UINT8 Minor; ///< Minor version number
+ UINT8 Rev; ///< Revision number
+ UINT8 Build; ///< Build number
+} SiMrcVersion;
+
+//
+// Matches MrcChannelSts enum in MRC
+//
+#ifndef CHANNEL_NOT_PRESENT
+#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller.
+#endif
+#ifndef CHANNEL_DISABLED
+#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled.
+#endif
+#ifndef CHANNEL_PRESENT
+#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled.
+#endif
+
+//
+// Matches MrcDimmSts enum in MRC
+//
+#ifndef DIMM_ENABLED
+#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected.
+#endif
+#ifndef DIMM_DISABLED
+#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence.
+#endif
+#ifndef DIMM_PRESENT
+#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used.
+#endif
+#ifndef DIMM_NOT_PRESENT
+#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair.
+#endif
+
+//
+// Matches MrcBootMode enum in MRC
+//
+#ifndef __MRC_BOOT_MODE__
+#define __MRC_BOOT_MODE__ //The below values are originated from MrcCommonTypes.h
+ #ifndef INT32_MAX
+ #define INT32_MAX (0x7FFFFFFF)
+ #endif //INT32_MAX
+typedef enum {
+ bmCold, ///< Cold boot
+ bmWarm, ///< Warm boot
+ bmS3, ///< S3 resume
+ bmFast, ///< Fast boot
+ MrcBootModeMax, ///< MRC_BOOT_MODE enumeration maximum value.
+ MrcBootModeDelim = INT32_MAX ///< This value ensures the enum size is consistent on both sides of the PPI.
+} MRC_BOOT_MODE;
+#endif //__MRC_BOOT_MODE__
+
+//
+// Matches MrcDdrType enum in MRC
+//
+#ifndef MRC_DDR_TYPE_DDR5
+#define MRC_DDR_TYPE_DDR5 1
+#endif
+#ifndef MRC_DDR_TYPE_LPDDR5
+#define MRC_DDR_TYPE_LPDDR5 2
+#endif
+#ifndef MRC_DDR_TYPE_LPDDR4
+#define MRC_DDR_TYPE_LPDDR4 3
+#endif
+#ifndef MRC_DDR_TYPE_UNKNOWN
+#define MRC_DDR_TYPE_UNKNOWN 4
+#endif
+
+#define MAX_PROFILE_NUM 7 // number of memory profiles supported
+#define MAX_XMP_PROFILE_NUM 5 // number of XMP profiles supported
+
+#define MAX_TRACE_REGION 5
+#define MAX_TRACE_CACHE_TYPE 2
+
+//
+// DIMM timings
+//
+typedef struct {
+ UINT32 tCK; ///< Memory cycle time, in femtoseconds.
+ UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode.
+ UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency.
+ UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time.
+ UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time.
+ UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time.
+ UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time.
+ UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval.
+ UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time.
+ UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks.
+ UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time.
+ UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups.
+ UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups.
+ UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time.
+ UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time.
+ UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time.
+ UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups.
+ UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups.
+ UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group.
+} MRC_CH_TIMING;
+
+typedef struct {
+ UINT16 tRDPRE; ///< Read CAS to Precharge cmd delay
+} MRC_IP_TIMING;
+
+///
+/// Memory SMBIOS & OC Memory Data Hob
+///
+typedef struct {
+ UINT8 Status; ///< See MrcDimmStatus for the definition of this field.
+ UINT8 DimmId;
+ UINT32 DimmCapacity; ///< DIMM size in MBytes.
+ UINT16 MfgId;
+ UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes
+ UINT8 RankInDimm; ///< The number of ranks in this DIMM.
+ UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation.
+ UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation.
+ UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation.
+ UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation.
+ UINT16 Speed; ///< The maximum capable speed of the device, in MHz
+ UINT8 MdSocket; ///< MdSocket: 0 = Memory Down, 1 = Socketed. Needed for SMBIOS structure creation.
+} DIMM_INFO;
+
+typedef struct {
+ UINT8 Status; ///< Indicates whether this channel should be used.
+ UINT8 ChannelId;
+ UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel.
+ MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values.
+ DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics.
+} CHANNEL_INFO;
+
+typedef struct {
+ UINT8 Status; ///< Indicates whether this controller should be used.
+ UINT16 DeviceId; ///< The PCI device id of this memory controller.
+ UINT8 RevisionId; ///< The PCI revision id of this memory controller.
+ UINT8 ChannelCount; ///< Number of valid channels that exist on the controller.
+ CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions.
+} CONTROLLER_INFO;
+
+typedef struct {
+ UINT64 BaseAddress; ///< Trace Base Address
+ UINT64 TotalSize; ///< Total Trace Region of Same Cache type
+ UINT8 CacheType; ///< Trace Cache Type
+ UINT8 ErrorCode; ///< Trace Region Allocation Fail Error code
+ UINT8 Rsvd[2];
+} PSMI_MEM_INFO;
+
+/// This data structure contains per-SaGv timing values that are considered output by the MRC.
+typedef struct {
+ UINT32 DataRate; ///< The memory rate for the current SaGv Point in units of MT/s
+ MRC_CH_TIMING JedecTiming; ///< Timings used for this entry's corresponding SaGv Point - derived from JEDEC SPD spec
+ MRC_IP_TIMING IpTiming; ///< Timings used for this entry's corresponding SaGv Point - IP specific
+} HOB_SAGV_TIMING_OUT;
+
+/// This data structure contains SAGV config values that are considered output by the MRC.
+typedef struct {
+ UINT32 NumSaGvPointsEnabled; ///< Count of the total number of SAGV Points enabled.
+ UINT32 SaGvPointMask; ///< Bit mask where each bit indicates an enabled SAGV point.
+ HOB_SAGV_TIMING_OUT SaGvTiming[HOB_MAX_SAGV_POINTS];
+} HOB_SAGV_INFO;
+
+typedef struct {
+ UINT8 Revision;
+ UINT16 DataWidth; ///< Data width, in bits, of this memory device
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.18.2 and Table 75
+ **/
+ UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3
+ UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz)
+ UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz)
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.17.3 and Table 72
+ **/
+ UINT8 ErrorCorrectionType;
+
+ SiMrcVersion Version;
+ BOOLEAN EccSupport;
+ UINT8 MemoryProfile;
+ UINT8 IsDMBRunning; ///< Deprecated.
+ UINT32 TotalPhysicalMemorySize;
+ UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist.
+ ///
+ /// Set of bit flags showing XMP and User Profile capability status for the DIMMs detected in system. For each bit, 1 is supported, 0 is unsupported.
+ /// Bit 0: XMP Profile 1 capability status
+ /// Bit 1: XMP Profile 2 capability status
+ /// Bit 2: XMP Profile 3 capability status
+ /// Bit 3: User Profile 4 capability status
+ /// Bit 4: User Profile 5 capability status
+ ///
+ UINT8 XmpProfileEnable;
+ UINT8 XmpConfigWarning; ///< If XMP capable DIMMs config support only 1DPC, but 2DPC is installed
+ UINT8 Ratio; ///< DDR Frequency Ratio, Max Value 255
+ UINT8 RefClk;
+ UINT32 VddVoltage[MAX_PROFILE_NUM];
+ UINT32 VddqVoltage[MAX_PROFILE_NUM];
+ UINT32 VppVoltage[MAX_PROFILE_NUM];
+ CONTROLLER_INFO Controller[MAX_NODE];
+ UINT16 Ratio_UINT16; ///< DDR Frequency Ratio, used for programs that require ratios higher then 255
+ UINT32 NumPopulatedChannels; ///< Total number of memory channels populated
+ HOB_SAGV_INFO SagvConfigInfo; ///< This data structure contains SAGV config values that are considered output by the MRC.
+ UINT16 TotalMemWidth; ///< Total Memory Width in bits from all populated channels
+ BOOLEAN MemorySpeedReducedWrongDimmSlot; ///< Can be used by OEM BIOS to display a warning on the screen that DDR speed was reduced due to wrong DIMM population
+ BOOLEAN MemorySpeedReducedMixedConfig; ///< Can be used by OEM BIOS to display a warning on the screen that DDR speed was reduced due to mixed DIMM config
+ BOOLEAN DynamicMemoryBoostTrainingFailed; ///< TRUE if Dynamic Memory Boost failed to train and was force disabled on the last full training boot. FALSE otherwise.
+} MEMORY_INFO_DATA_HOB;
+
+/**
+ Memory Platform Data Hob
+
+ <b>Revision 1:</b>
+ - Initial version.
+ <b>Revision 2:</b>
+ - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields
+**/
+typedef struct {
+ UINT8 Revision;
+ UINT8 Reserved[3];
+ UINT32 BootMode;
+ UINT32 TsegSize;
+ UINT32 TsegBase;
+ UINT32 PrmrrSize;
+ UINT64 PrmrrBase;
+ UINT32 GttBase;
+ UINT32 MmioSize;
+ UINT32 PciEBaseAddress;
+ PSMI_MEM_INFO PsmiInfo[MAX_TRACE_CACHE_TYPE];
+ PSMI_MEM_INFO PsmiRegionInfo[MAX_TRACE_REGION];
+ BOOLEAN MrcBasicMemoryTestPass;
+} MEMORY_PLATFORM_DATA;
+
+typedef struct {
+ EFI_HOB_GUID_TYPE EfiHobGuidType;
+ MEMORY_PLATFORM_DATA Data;
+ UINT8 *Buffer;
+} MEMORY_PLATFORM_DATA_HOB;
+
+#pragma pack (pop)
+
+#endif // _MEM_INFO_HOB_H_
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 15:39:57 +0000