mb/google/zork: Switch USI_RESET to active low polarity for v3.6+

v3.6 of reference schematics have switched the polarity of reset
signal to touchscreen controller from active high to active low. This
change updates the default configuration in baseboard gpio tables to
set the reset GPIO to output low and override tables in variants to set the
reset GPIO to output high. Additionally, devicetree by default exposes
ACTIVE_LOW configuration for reset GPIO. In order to support pre-v3.6
boards, reset GPIO is updated to ACTIVE_HIGH based on board version.

BUG=b:161937506

Change-Id: I092f274d8eb1920a1cd6d3eccbe8f26b0b28928a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

17 files changed, 174 insertions, 11 deletions

diff --git a/src/mainboard/google/zork/mainboard.c b/src/mainboard/google/zork/mainboard.c
index 1e4ea0654228..4206fdf83041 100644
--- a/src/mainboard/google/zork/mainboard.c
+++ b/src/mainboard/google/zork/mainboard.c
@@ -136,6 +136,7 @@ static void mainboard_devtree_update(void)
 {
 	variant_audio_update();
 	variant_bluetooth_update();
+	variant_touchscreen_update();
 	variant_devtree_update();
 }
 
diff --git a/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_dalboz.c b/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_dalboz.c
index a07529ff9d63..268c70fe6118 100644
--- a/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_dalboz.c
+++ b/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_dalboz.c
@@ -150,8 +150,8 @@ static const struct soc_amd_gpio gpio_set_stage_ram[] = {
 	PAD_NF(GPIO_138, UART0_TXD, PULL_NONE),
 	/* DEV_BEEP_BCLK */
 	PAD_GPI(GPIO_139, PULL_NONE),
-	/* USI_RESET */
-	PAD_GPO(GPIO_140, HIGH),
+	/* USI_RESET_L */
+	PAD_GPO(GPIO_140, LOW),
 	/* USB_HUB_RST_L */
 	PAD_GPO(GPIO_141, HIGH),
 	/* SD_AUX_RESET_L */
diff --git a/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_trembyle.c b/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_trembyle.c
index c6c728e08f5a..1fb0cde30a72 100644
--- a/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_trembyle.c
+++ b/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_trembyle.c
@@ -164,8 +164,8 @@ static const struct soc_amd_gpio gpio_set_stage_ram[] = {
 	PAD_NF(GPIO_138, UART0_TXD, PULL_NONE),
 	/* DEV_BEEP_BCLK */
 	PAD_GPI(GPIO_139, PULL_NONE),
-	/* USI_RESET */
-	PAD_GPO(GPIO_140, HIGH),
+	/* USI_RESET_L */
+	PAD_GPO(GPIO_140, LOW),
 	/* UART1_RXD - FPMCU */
 	PAD_NF(GPIO_141, UART1_RXD, PULL_NONE),
 	/* SD_AUX_RESET_L */
diff --git a/src/mainboard/google/zork/variants/baseboard/include/baseboard/variants.h b/src/mainboard/google/zork/variants/baseboard/include/baseboard/variants.h
index 8770944993cc..93aad0ff5a89 100644
--- a/src/mainboard/google/zork/variants/baseboard/include/baseboard/variants.h
+++ b/src/mainboard/google/zork/variants/baseboard/include/baseboard/variants.h
@@ -37,6 +37,8 @@ void variant_devtree_update(void);
 void variant_audio_update(void);
 /* Update bluetooth configuration in devicetree during ramstage. */
 void variant_bluetooth_update(void);
+/* Update touchscreen configuration in devicetree during ramstage. */
+void variant_touchscreen_update(void);
 /* Configure PCIe GPIOs as per variant sequencing requirements. */
 void variant_pcie_gpio_configure(void);
 
diff --git a/src/mainboard/google/zork/variants/baseboard/ramstage_common.c b/src/mainboard/google/zork/variants/baseboard/ramstage_common.c
index 8a6fa47cebcb..a55bdf2c81fe 100644
--- a/src/mainboard/google/zork/variants/baseboard/ramstage_common.c
+++ b/src/mainboard/google/zork/variants/baseboard/ramstage_common.c
@@ -6,14 +6,16 @@
 #include <device/device.h>
 #include <drivers/amd/i2s_machine_dev/chip.h>
 #include <drivers/i2c/generic/chip.h>
+#include <drivers/i2c/hid/chip.h>
 #include <drivers/usb/acpi/chip.h>
 #include <ec/google/chromeec/ec.h>
 #include <soc/gpio.h>
+#include <soc/iomap.h>
 #include <soc/pci_devs.h>
 
 extern struct chip_operations drivers_amd_i2s_machine_dev_ops;
 extern struct chip_operations drivers_i2c_generic_ops;
-
+extern struct chip_operations drivers_i2c_hid_ops;
 
 static void update_hp_int_odl(void)
 {
@@ -202,3 +204,52 @@ void variant_bluetooth_update(void)
 
 	baseboard_remove_bluetooth_reset_gpio();
 }
+
+void variant_touchscreen_update(void)
+{
+	DEVTREE_CONST struct device *mmio_dev = NULL;
+	struct device *child = NULL;
+
+	/*
+	 * By default, devicetree/overridetree entries for touchscreen device are configured to
+	 * match v3.6 of reference schematics. So, if the board is using v3.6+ schematics, no
+	 * additional work is required here. For maintaining support for pre-v3.6 boards, rest
+	 * of the code in this function finds all entries that correspond to touchscreen
+	 * devices (identified by reset_gpio being set to GPIO_140) and updates them as per
+	 * pre-v3.6 version of schematics:
+	 * 1. reset_gpio is marked as active high.
+	 */
+	if (variant_uses_v3_6_schematics())
+		return;
+
+	while (1) {
+		mmio_dev = dev_find_path(mmio_dev, DEVICE_PATH_MMIO);
+		if (mmio_dev == NULL)
+			break;
+		if (mmio_dev->path.mmio.addr == APU_I2C2_BASE)
+			break;
+	}
+
+	if (mmio_dev == NULL)
+		return;
+
+	while ((child = dev_bus_each_child(mmio_dev->link_list, child)) != NULL) {
+		struct drivers_i2c_generic_config *cfg;
+
+		if (child->chip_ops == &drivers_i2c_generic_ops) {
+			cfg = config_of(child);
+		} else if (child->chip_ops == &drivers_i2c_hid_ops) {
+			struct drivers_i2c_hid_config *hid_cfg;
+			hid_cfg = config_of(child);
+			cfg = &hid_cfg->generic;
+		} else {
+			continue;
+		}
+
+		/* If reset_gpio is set to GPIO_140, assume that this is touchscreen device. */
+		if (cfg->reset_gpio.pins[0] != GPIO_140)
+			continue;
+
+		cfg->reset_gpio.active_low = 0;
+	}
+}
diff --git a/src/mainboard/google/zork/variants/berknip/gpio.c b/src/mainboard/google/zork/variants/berknip/gpio.c
index 08b1c4da244b..2a43b5a19039 100644
--- a/src/mainboard/google/zork/variants/berknip/gpio.c
+++ b/src/mainboard/google/zork/variants/berknip/gpio.c
@@ -22,6 +22,13 @@ static const struct soc_amd_gpio berknip_bid1_gpio_set_stage_ram[] = {
 	PAD_GPI(GPIO_86, PULL_NONE),
 	/* MST_GPIO_3 (Fw Update HDMI hub) */
 	PAD_GPI(GPIO_90, PULL_NONE),
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
+};
+
+static const struct soc_amd_gpio berknip_bid2_gpio_set_stage_ram[] = {
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
 };
 
 const struct soc_amd_gpio *variant_override_gpio_table(size_t *size)
@@ -39,6 +46,9 @@ const struct soc_amd_gpio *variant_override_gpio_table(size_t *size)
 	if (board_version <= 1) {
 		*size = ARRAY_SIZE(berknip_bid1_gpio_set_stage_ram);
 		return berknip_bid1_gpio_set_stage_ram;
+	} else if (board_version <= 2) {
+		*size = ARRAY_SIZE(berknip_bid2_gpio_set_stage_ram);
+		return berknip_bid2_gpio_set_stage_ram;
 	}
 
 	*size = 0;
diff --git a/src/mainboard/google/zork/variants/dalboz/gpio.c b/src/mainboard/google/zork/variants/dalboz/gpio.c
index 73c0042f0b37..7b13d839da6d 100644
--- a/src/mainboard/google/zork/variants/dalboz/gpio.c
+++ b/src/mainboard/google/zork/variants/dalboz/gpio.c
@@ -15,6 +15,8 @@ static const struct soc_amd_gpio bid_1_gpio_set_stage_ram[] = {
 	PAD_NF(GPIO_18, USB_OC2_L, PULL_NONE),
 	/* EN_PWR_TOUCHPAD_PS2 */
 	PAD_GPO(GPIO_67, HIGH),
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
 	/* Unused */
 	PAD_NC(GPIO_143),
 };
@@ -24,6 +26,8 @@ static const struct soc_amd_gpio bid_2_gpio_set_stage_ram[] = {
 	PAD_GPO(GPIO_6, LOW), // Select Camera 1 DMIC
 	/* EN_PWR_TOUCHPAD_PS2 */
 	PAD_GPO(GPIO_67, HIGH),
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
 };
 
 const struct soc_amd_gpio *variant_override_gpio_table(size_t *size)
diff --git a/src/mainboard/google/zork/variants/dalboz/overridetree.cb b/src/mainboard/google/zork/variants/dalboz/overridetree.cb
index 9fe15c5d34f5..8735a0692147 100644
--- a/src/mainboard/google/zork/variants/dalboz/overridetree.cb
+++ b/src/mainboard/google/zork/variants/dalboz/overridetree.cb
@@ -48,7 +48,7 @@ chip soc/amd/picasso
 			register "desc" = ""Raydium Touchscreen""
 			register "probed" = "1"
 			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_12)"
-			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)"
+			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_140)"
 			# 32ms: Rise time of the reset line
 			# 20ms: Firmware ready time
 			register "reset_delay_ms" = "32 + 20"
@@ -61,7 +61,7 @@ chip soc/amd/picasso
 			register "desc" = ""ELAN Touchscreen""
 			register "probed" = "1"
 			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_12)"
-			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)"
+			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_140)"
 			register "reset_delay_ms" = "20"
 			register "has_power_resource" = "1"
 			device i2c 10 on end
@@ -71,7 +71,7 @@ chip soc/amd/picasso
 			register "generic.desc" = ""Synaptics Touchscreen""
 			register "generic.irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_12)"
 			register "generic.probed" = "1"
-			register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)"
+			register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_140)"
 			register "generic.reset_delay_ms" = "45"
 			register "generic.has_power_resource" = "1"
 			register "generic.disable_gpio_export_in_crs" = "1"
@@ -83,7 +83,7 @@ chip soc/amd/picasso
 			register "generic.desc" = ""Goodix Touchscreen""
 			register "generic.irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_12)"
 			register "generic.probed" = "1"
-			register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)"
+			register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_140)"
 			register "generic.reset_delay_ms" = "120"
 			register "generic.reset_off_delay_ms" = "1"
 			register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_144)"
diff --git a/src/mainboard/google/zork/variants/dirinboz/Makefile.inc b/src/mainboard/google/zork/variants/dirinboz/Makefile.inc
index 9dc5159c5362..0b6bc4b3494a 100644
--- a/src/mainboard/google/zork/variants/dirinboz/Makefile.inc
+++ b/src/mainboard/google/zork/variants/dirinboz/Makefile.inc
@@ -1,3 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 
 subdirs-y += ../baseboard/spd
+
+ramstage-y += gpio.c
diff --git a/src/mainboard/google/zork/variants/dirinboz/gpio.c b/src/mainboard/google/zork/variants/dirinboz/gpio.c
new file mode 100644
index 000000000000..7269b23db54c
--- /dev/null
+++ b/src/mainboard/google/zork/variants/dirinboz/gpio.c
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <boardid.h>
+#include <gpio.h>
+#include <soc/gpio.h>
+#include <ec/google/chromeec/ec.h>
+
+static const struct soc_amd_gpio bid_1_gpio_set_stage_ram[] = {
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
+};
+
+const struct soc_amd_gpio *variant_override_gpio_table(size_t *size)
+{
+	uint32_t board_version;
+
+	/*
+	 * If board version cannot be read, assume that this is an older revision of the board
+	 * and so apply overrides. If board version is provided by the EC, then apply overrides
+	 * if version < 2.
+	 */
+	if (google_chromeec_cbi_get_board_version(&board_version))
+		board_version = 1;
+
+	if (board_version < 2) {
+		*size = ARRAY_SIZE(bid_1_gpio_set_stage_ram);
+		return bid_1_gpio_set_stage_ram;
+	}
+
+	*size = 0;
+	return NULL;
+}
diff --git a/src/mainboard/google/zork/variants/ezkinil/gpio.c b/src/mainboard/google/zork/variants/ezkinil/gpio.c
index 053c3c8f5e71..b490b3a0ae8a 100644
--- a/src/mainboard/google/zork/variants/ezkinil/gpio.c
+++ b/src/mainboard/google/zork/variants/ezkinil/gpio.c
@@ -22,6 +22,8 @@ static const struct soc_amd_gpio ezkinil_bid1_gpio_set_stage_ram[] = {
 	PAD_GPI(GPIO_86, PULL_NONE),
 	/* MST_GPIO_3 (Fw Update HDMI hub) */
 	PAD_GPI(GPIO_90, PULL_NONE),
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
 };
 
 static const struct soc_amd_gpio ezkinil_bid2_gpio_set_stage_ram[] = {
@@ -37,6 +39,8 @@ static const struct soc_amd_gpio ezkinil_bid2_gpio_set_stage_ram[] = {
 	PAD_NC(GPIO_69),
 	/* MST_GPIO_2 (Fw Update HDMI hub) Change NC */
 	PAD_NC(GPIO_86),
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
 };
 
 static const struct soc_amd_gpio ezkinil_bid3_gpio_set_stage_ram[] = {
@@ -44,6 +48,8 @@ static const struct soc_amd_gpio ezkinil_bid3_gpio_set_stage_ram[] = {
 	PAD_NC(GPIO_11),
 	/* FPMCU_BOOT0 Change NC */
 	PAD_NC(GPIO_69),
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
 };
 
 const struct soc_amd_gpio *variant_override_gpio_table(size_t *size)
diff --git a/src/mainboard/google/zork/variants/morphius/gpio.c b/src/mainboard/google/zork/variants/morphius/gpio.c
index 074fe006d4fa..ece2dd6bf87b 100644
--- a/src/mainboard/google/zork/variants/morphius/gpio.c
+++ b/src/mainboard/google/zork/variants/morphius/gpio.c
@@ -24,6 +24,8 @@ static const struct soc_amd_gpio morphius_bid1_gpio_set_stage_ram[] = {
 	PAD_GPI(GPIO_86, PULL_NONE),
 	/* MST_GPIO_3 (Fw Update HDMI hub) */
 	PAD_GPI(GPIO_90, PULL_NONE),
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
 };
 
 static const struct soc_amd_gpio morphius_bid2_gpio_set_stage_ram[] = {
@@ -41,6 +43,13 @@ static const struct soc_amd_gpio morphius_bid2_gpio_set_stage_ram[] = {
 	PAD_GPI(GPIO_86, PULL_NONE),
 	/* MST_GPIO_3 (Fw Update HDMI hub) */
 	PAD_GPI(GPIO_90, PULL_NONE),
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
+};
+
+static const struct soc_amd_gpio morphius_bid3_gpio_set_stage_ram[] = {
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
 };
 
 const struct soc_amd_gpio *variant_override_gpio_table(size_t *size)
@@ -61,6 +70,9 @@ const struct soc_amd_gpio *variant_override_gpio_table(size_t *size)
 	} else if (board_version <= 2) {
 		*size = ARRAY_SIZE(morphius_bid2_gpio_set_stage_ram);
 		return morphius_bid2_gpio_set_stage_ram;
+	} else if (board_version <= 3) {
+		*size = ARRAY_SIZE(morphius_bid3_gpio_set_stage_ram);
+		return morphius_bid3_gpio_set_stage_ram;
 	}
 
 	*size = 0;
diff --git a/src/mainboard/google/zork/variants/trembyle/gpio.c b/src/mainboard/google/zork/variants/trembyle/gpio.c
index d8367e7e1a60..fc0d2c67df8d 100644
--- a/src/mainboard/google/zork/variants/trembyle/gpio.c
+++ b/src/mainboard/google/zork/variants/trembyle/gpio.c
@@ -24,6 +24,8 @@ static const struct soc_amd_gpio trembyle_bid1_bid2_gpio_set_stage_ram[] = {
 	PAD_GPI(GPIO_86, PULL_NONE),
 	/* MST_GPIO_3 (Fw Update HDMI hub) */
 	PAD_GPI(GPIO_90, PULL_NONE),
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
 };
 
 static const struct soc_amd_gpio trembyle_bid3_gpio_set_stage_ram[] = {
@@ -41,6 +43,8 @@ static const struct soc_amd_gpio trembyle_bid3_gpio_set_stage_ram[] = {
 	PAD_GPI(GPIO_86, PULL_NONE),
 	/* MST_GPIO_3 (Fw Update HDMI hub) */
 	PAD_GPI(GPIO_90, PULL_NONE),
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
 };
 
 const struct soc_amd_gpio *variant_override_gpio_table(size_t *size)
diff --git a/src/mainboard/google/zork/variants/trembyle/overridetree.cb b/src/mainboard/google/zork/variants/trembyle/overridetree.cb
index 26d9a3ee8242..9e7660b234ff 100644
--- a/src/mainboard/google/zork/variants/trembyle/overridetree.cb
+++ b/src/mainboard/google/zork/variants/trembyle/overridetree.cb
@@ -71,7 +71,7 @@ chip soc/amd/picasso
 			register "desc" = ""Raydium Touchscreen""
 			register "probed" = "1"
 			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_12)"
-			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)"
+			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_140)"
 			# 32ms: Rise time of the reset line
 			# 20ms: Firmware ready time
 			register "reset_delay_ms" = "32 + 20"
@@ -84,7 +84,7 @@ chip soc/amd/picasso
 			register "desc" = ""ELAN Touchscreen""
 			register "probed" = "1"
 			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_12)"
-			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)"
+			register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_140)"
 			register "reset_delay_ms" = "20"
 			register "has_power_resource" = "1"
 			device i2c 10 on end
diff --git a/src/mainboard/google/zork/variants/vilboz/Makefile.inc b/src/mainboard/google/zork/variants/vilboz/Makefile.inc
index dc1e4117f99b..af38c8828d3c 100644
--- a/src/mainboard/google/zork/variants/vilboz/Makefile.inc
+++ b/src/mainboard/google/zork/variants/vilboz/Makefile.inc
@@ -3,3 +3,4 @@
 subdirs-y += ./spd
 
 ramstage-y += variant.c
+ramstage-y += gpio.c
diff --git a/src/mainboard/google/zork/variants/vilboz/gpio.c b/src/mainboard/google/zork/variants/vilboz/gpio.c
new file mode 100644
index 000000000000..7269b23db54c
--- /dev/null
+++ b/src/mainboard/google/zork/variants/vilboz/gpio.c
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <boardid.h>
+#include <gpio.h>
+#include <soc/gpio.h>
+#include <ec/google/chromeec/ec.h>
+
+static const struct soc_amd_gpio bid_1_gpio_set_stage_ram[] = {
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
+};
+
+const struct soc_amd_gpio *variant_override_gpio_table(size_t *size)
+{
+	uint32_t board_version;
+
+	/*
+	 * If board version cannot be read, assume that this is an older revision of the board
+	 * and so apply overrides. If board version is provided by the EC, then apply overrides
+	 * if version < 2.
+	 */
+	if (google_chromeec_cbi_get_board_version(&board_version))
+		board_version = 1;
+
+	if (board_version < 2) {
+		*size = ARRAY_SIZE(bid_1_gpio_set_stage_ram);
+		return bid_1_gpio_set_stage_ram;
+	}
+
+	*size = 0;
+	return NULL;
+}
diff --git a/src/mainboard/google/zork/variants/woomax/gpio.c b/src/mainboard/google/zork/variants/woomax/gpio.c
index 9c779d734dba..3625a71786ae 100644
--- a/src/mainboard/google/zork/variants/woomax/gpio.c
+++ b/src/mainboard/google/zork/variants/woomax/gpio.c
@@ -18,6 +18,8 @@ static const struct soc_amd_gpio woomax_gpio_set_stage_ram[] = {
 	PAD_NC(GPIO_69),
 	/* RAM_ID_4  */
 	PAD_NC(GPIO_84),
+	/* USI_RESET */
+	PAD_GPO(GPIO_140, HIGH),
 	/* GPIO_141 NC */
 	PAD_NC(GPIO_141),
 	/* GPIO_143 NC */