Documentation/mainboard/hp: Add more about internal flashing

Add a more detailed explanation of internal flashing
on the HP Compaq 8200 Elite SFF.

Signed-off-by: Václav Straka <venda.straka@gmail.com>
Change-Id: I53a697a2dd6c10fff8f287284f75d229c7c4b636
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>

2 files changed, 89 insertions, 20 deletions

diff --git a/Documentation/mainboard/hp/compaq_8200_sff.md b/Documentation/mainboard/hp/compaq_8200_sff.md
index 3e83e2506033..72df9e3e0236 100644
--- a/Documentation/mainboard/hp/compaq_8200_sff.md
+++ b/Documentation/mainboard/hp/compaq_8200_sff.md
@@ -14,30 +14,99 @@ The following things are still missing from this coreboot port:
 ## Flashing coreboot
 
 ```eval_rst
-+---------------------+------------+
-| Type                | Value      |
-+=====================+============+
-| Socketed flash      | no         |
-+---------------------+------------+
-| Model               | MX25L6406E |
-+---------------------+------------+
-| Size                | 8 MiB      |
-+---------------------+------------+
-| In circuit flashing | yes        |
-+---------------------+------------+
-| Package             | SOIC-8     |
-+---------------------+------------+
-| Write protection    | No         |
-+---------------------+------------+
-| Dual BIOS feature   | No         |
-+---------------------+------------+
-| Internal flashing   | yes        |
-+---------------------+------------+
++---------------------+-------------------------+
+| Type                | Value                   |
++=====================+=========================+
+| Socketed flash      | no                      |
++---------------------+-------------------------+
+| Model               | MX25L6406E/MX25L6408E   |
++---------------------+-------------------------+
+| Size                | 8 MiB                   |
++---------------------+-------------------------+
+| In circuit flashing | yes                     |
++---------------------+-------------------------+
+| Package             | SOIC-8                  |
++---------------------+-------------------------+
+| Write protection    | bios region             |
++---------------------+-------------------------+
+| Dual BIOS feature   | No                      |
++---------------------+-------------------------+
+| Internal flashing   | yes                     |
++---------------------+-------------------------+
+```
+
+### Flash layout
+The original layout of the flash should look like this:
+```
+00000000:00000fff fd
+00510000:007fffff bios
+00003000:0050ffff me
+00001000:00002fff gbe
 ```
 
 ### Internal programming
 
 The SPI flash can be accessed using [flashrom].
+```console
+$ flashrom -p internal -c MX25L6406E/MX25L6408E -w coreboot.rom
+```
+
+After shorting the FDO jumper you gain access to the full flash, but you
+still cannot write in the bios region due to SPI protected ranges.
+
+**Position of FDO jumper close to the IO and second fan connector**
+![][compaq_8200_jumper]
+
+[compaq_8200_jumper]: compaq_8200_sff_jumper.jpg
+
+To write to the bios region you can use an [IFD Hack] originally developed
+for MacBooks, but with modified values described in this guide.
+You should read both guides before attempting the procedure.
+
+Since you can still write in the flash descriptor, you can shrink
+the ME and then move the bios region into where the ME originally was.
+coreboot does not by default restrict writing to any part of the flash, so
+you will first flash a small coreboot build and after it boots, flash
+the full one.
+
+The temporary flash layout with the neutered ME firmware should look like this:
+```
+00000000:00000fff fd
+00023000:001fffff bios
+00003000:00022fff me
+00001000:00002fff gbe
+00200000:007fffff pd
+```
+
+It is very important to use these exact numbers or you will need to fix it
+using external flashing, but you should already be familiar with the risks
+if you got this far.
+
+The temporary ROM chip size to set in menuconfig is 2 MB but the default
+CBFS size is too large for that, you can use up to about 0x1D0000.
+
+When building both the temporary and the permanent installation, don't forget
+to also add the gigabit ethernet configuration when adding the flash descriptor
+and ME firmware.
+
+You can pad the ROM to the required 8MB with zeros using:
+```console
+$ dd if=/dev/zero of=6M.bin bs=1024 count=6144
+$ cat coreboot.rom 6M.bin > coreboot8.rom
+```
+
+If you want to continue using the neutered ME firmware use this flash layout
+for stage 2:
+```
+00000000:00000fff fd
+00023000:007fffff bios
+00003000:00022fff me
+00001000:00002fff gbe
+```
+
+If you want to use the original ME firmware use the original flash layout.
+
+More about flashing internally and getting the flash layout [here](../../tutorial/flashing_firmware/index.md).
 
 ### External programming
 
@@ -74,7 +143,7 @@ as otherwise there's not enough space near the flash.
 | Coprocessor      | Intel ME                                         |
 +------------------+--------------------------------------------------+
 ```
-
+[IFD Hack]: https://review.coreboot.org/plugins/gitiles/coreboot/+/refs/changes/70/38770/4/Documentation/flash_tutorial/int_macbook.md/
 [Compaq 8200 Elite SFF]: https://support.hp.com/us-en/document/c03414707
 [HP]: https://www.hp.com/
 [flashrom]: https://flashrom.org/Flashrom
diff --git a/Documentation/mainboard/hp/compaq_8200_sff_jumper.jpg b/Documentation/mainboard/hp/compaq_8200_sff_jumper.jpg
new file mode 100644
index 000000000000..ba307464bc2e
--- /dev/null
+++ b/Documentation/mainboard/hp/compaq_8200_sff_jumper.jpg