Clean up whitespace and comments style. (trivial)

Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Marc Jones <marc.jones@amd.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3480 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 263 insertions, 245 deletions

diff --git a/src/cpu/amd/model_fxx/fidvid.c b/src/cpu/amd/model_fxx/fidvid.c
index e35b5fc54381..22ade3a4fdce 100644
--- a/src/cpu/amd/model_fxx/fidvid.c
+++ b/src/cpu/amd/model_fxx/fidvid.c
@@ -6,8 +6,8 @@
 
 #define K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST 1
 
-#ifndef SB_VFSMAF 
-#define	SB_VFSMAF 1
+#ifndef SB_VFSMAF
+#define SB_VFSMAF 1
 #endif
 
 #define FX_SUPPORT 1
@@ -16,10 +16,10 @@ static inline void print_debug_fv(const char *str, unsigned val)
 {
 #if K8_SET_FIDVID_DEBUG == 1
 	#if CONFIG_USE_PRINTK_IN_CAR
-        	printk_debug("%s%x\r\n", str, val);
-        #else
-                print_debug(str); print_debug_hex32(val); print_debug("\r\n");
-        #endif
+		printk_debug("%s%x\r\n", str, val);
+	#else
+		print_debug(str); print_debug_hex32(val); print_debug("\r\n");
+	#endif
 #endif
 }
 
@@ -27,10 +27,10 @@ static inline void print_debug_fv_8(const char *str, unsigned val)
 {
 #if K8_SET_FIDVID_DEBUG == 1
 	#if CONFIG_USE_PRINTK_IN_CAR
-                printk_debug("%s%02x\r\n", str, val);
-        #else
-                print_debug(str); print_debug_hex8(val); print_debug("\r\n");
-        #endif
+		printk_debug("%s%02x\r\n", str, val);
+	#else
+		print_debug(str); print_debug_hex8(val); print_debug("\r\n");
+	#endif
 #endif
 }
 
@@ -38,10 +38,10 @@ static inline void print_debug_fv_64(const char *str, unsigned val, unsigned val
 {
 #if K8_SET_FIDVID_DEBUG == 1
 	#if CONFIG_USE_PRINTK_IN_CAR
-                printk_debug("%s%x%x\r\n", str, val, val2);
-        #else
-                print_debug(str); print_debug_hex32(val); print_debug_hex32(val2); print_debug("\r\n");
-        #endif
+		printk_debug("%s%x%x\r\n", str, val, val2);
+	#else
+		print_debug(str); print_debug_hex32(val); print_debug_hex32(val2); print_debug("\r\n");
+	#endif
 #endif
 }
 
@@ -52,27 +52,29 @@ static void enable_fid_change(void)
 	unsigned nodes;
 	int i;
 
-	nodes = ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1;
+	nodes = ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60) >> 4) & 7) + 1;
 
-	for(i=0; i<nodes; i++) {
+	for (i = 0; i < nodes; i++) {
 		dword = pci_read_config32(PCI_DEV(0, 0x18+i, 3), 0xd8);
 		dword &= 0x8ff00000;
-		dword |= (2<<28) | (0x02710);
-	        pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0xd8, dword);
+		dword |= (2 << 28) | (0x02710);
+		pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0xd8, dword);
 
 		dword = 0x04e2a707;
 		pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0xd4, dword);
 
+		/* disable the DRAM interface at first, it will be enabled
+		 * by raminit again */
 		dword = pci_read_config32(PCI_DEV(0, 0x18+i, 2), 0x94);
-		dword |= (1<<14);// disable the DRAM interface at first, it will be enabled by raminit again
+		dword |= (1 << 14);
 		pci_write_config32(PCI_DEV(0, 0x18+i, 2), 0x94, dword);
 
-                dword = 0x23070700; //enable FID/VID change
-//		dword = 0x00070000; //enable FID/VID change
-                pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0x80, dword);
+		dword = 0x23070700; /* enable FID/VID change */
+//		dword = 0x00070000; /* enable FID/VID change */
+		pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0x80, dword);
 
-                dword = 0x00132113;
-                pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0x84, dword);
+		dword = 0x00132113;
+		pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0x84, dword);
 
 	}
 }
@@ -80,48 +82,48 @@ static void enable_fid_change(void)
 #if K8_SET_FIDVID_ONE_BY_ONE == 0
 static unsigned set_fidvid_without_init(unsigned fidvid)
 {
+	msr_t msr;
+	uint32_t vid;
+	uint32_t fid;
 
-        msr_t msr;
-        uint32_t vid;
-        uint32_t fid;
-
-        fid = (fidvid >> 8) & 0x3f;
-        vid = (fidvid >> 16) & 0x3f;
+	fid = (fidvid >> 8) & 0x3f;
+	vid = (fidvid >> 16) & 0x3f;
 
-        // set new FID/VID
-        msr.hi = 1;
-        msr.lo = (vid<<8) | fid;
-        wrmsr(0xc0010041, msr);
-        return fidvid;
+	/* set new FID/VID */
+	msr.hi = 1;
+	msr.lo = (vid<<8) | fid;
+	wrmsr(0xc0010041, msr);
+	return fidvid;
 }
 #endif
 
 static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage)
 {
-	//for (cur, new) there is one <1600MHz x8 to find out next_fid 
+	/* for (cur, new) there is one <1600MHz x8 to find out next_fid */
 	static const uint8_t next_fid_a[] = {
-	/* x4  x5  x6  x7  x8  x9 x10 x11 x12 x13 x14 x15 */ // 0:x4, 2:x5....BASE=4, MIN=4, MAX=25, INC=2 result = (xX-BASE)*INC
+	/*  x4  x5  x6  x7  x8  x9 x10 x11 x12 x13 x14 x15 */
 /* x4 */    0,  9,  9,  8,  9,  9,  9,  9,  9,  9,  9,  9,
-/* x5 */    9,  0, 11, 11,  9,  9, 10, 11, 11, 11, 11, 11, 
+/* x5 */    9,  0, 11, 11,  9,  9, 10, 11, 11, 11, 11, 11,
 /* x6 */   11, 11,  0, 13, 11, 11, 11, 11, 12, 13, 13, 13,
 /* x7 */   13, 13, 13,  0, 13, 13, 13, 13, 13, 13, 14, 15,
 /* x8 */    4,  9,  9,  9,  0,  9,  9,  9,  9,  9,  9,  9,
-/* x9 */    4,  5, 10, 10,  8,  0,  0,  0,  0,  0,  0,  0, 
-/*x10 */    9,  5, 11, 11,  9,  0,  0,  0,  0,  0,  0,  0, 
+/* x9 */    4,  5, 10, 10,  8,  0,  0,  0,  0,  0,  0,  0,
+/*x10 */    9,  5, 11, 11,  9,  0,  0,  0,  0,  0,  0,  0,
 /*x11 */   10,  5,  6, 12, 10,  0,  0,  0,  0,  0,  0,  0,
 /*x12 */   11, 11,  6, 13, 11,  0,  0,  0,  0,  0,  0,  0,
 /*x13 */   12, 12,  6,  7, 12,  0,  0,  0,  0,  0,  0,  0,
 /*x14 */   13, 13, 13,  7, 13,  0,  0,  0,  0,  0,  0,  0,
-/*x15 */   14, 14, 14,  7, 14,  0,  0,  0,  0,  0,  0,  0, 
+/*x15 */   14, 14, 14,  7, 14,  0,  0,  0,  0,  0,  0,  0,
+/* 0:x4, 2:x5....BASE=4, MIN=4, MAX=25, INC=2 result = (xX-BASE)*INC */
 	};
 
-        msr_t msr;
-        uint32_t vid;
-        uint32_t fid;
+	msr_t msr;
+	uint32_t vid;
+	uint32_t fid;
 	uint32_t vid_max;
 	uint32_t fid_max;
-        uint32_t vid_cur;
-        uint32_t fid_cur;
+	uint32_t vid_cur;
+	uint32_t fid_cur;
 	unsigned apicidx;
 
 	int steps;
@@ -129,13 +131,13 @@ static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage)
 
 	apicidx = lapicid();
 
-	if(apicid!=apicidx) {
-#if CONFIG_USE_PRINTK_IN_CAR	
+	if (apicid != apicidx) {
+#if CONFIG_USE_PRINTK_IN_CAR
 		printk_err("wrong apicid, we want change %x, but it is %x\r\n", apicid, apicidx);
 #else
 		print_err("wrong apicid, we want change "); print_err_hex8(apicid); print_err(" but it is "); print_err_hex8(apicidx); print_err("\r\n");
 #endif
-		return fidvid;	
+		return fidvid;
 	}
 
 	fid = (fidvid >> 8) & 0x3f;
@@ -143,116 +145,122 @@ static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage)
 
 	msr = rdmsr(0xc0010042);
 
-        vid_cur = msr.hi & 0x3f;
-        fid_cur = msr.lo & 0x3f;
+	vid_cur = msr.hi & 0x3f;
+	fid_cur = msr.lo & 0x3f;
 
-	if((vid_cur==vid) && (fid_cur==fid)) return fidvid; 
+	if ((vid_cur==vid) && (fid_cur==fid))
+		return fidvid;
 
-        vid_max = (msr.hi>>(48-32)) & 0x3f;
-        fid_max = ((msr.lo>>16) & 0x3f); //max fid
+	vid_max = (msr.hi>>(48-32)) & 0x3f;
+	fid_max = ((msr.lo>>16) & 0x3f); /* max fid */
 #if FX_SUPPORT
-        if(fid_max>=((25-4)*2)) { // FX max fid is 5G
-                fid_max = ((msr.lo>>8) & 0x3f) + 5*2; // max FID is min fid + 1G
-                if(fid_max >= ((25-4)*2)) {
-                        fid_max = (10-4)*2; // hard set to 2G
-                }
-        }
+	if (fid_max>=((25-4)*2)) { /* FX max fid is 5G */
+		fid_max = ((msr.lo >> 8) & 0x3f) + 5 * 2; /* max FID is min fid + 1G */
+		if (fid_max >= ((25-4) * 2)) {
+			fid_max = (10-4) * 2; /* hard set to 2G */
+		}
+	}
 #endif
 
-        //set vid to max
-        msr.hi = 1;
-        msr.lo = (vid_max<<8) | (fid_cur);
+	/* set vid to max */
+	msr.hi = 1;
+	msr.lo = (vid_max << 8) | (fid_cur);
 #if SB_VFSMAF == 1
-        msr.lo |= (1<<16); // init changes
+	msr.lo |= (1<<16); /* init changes */
 #endif
-        wrmsr(0xc0010041, msr);
+	wrmsr(0xc0010041, msr);
 #if SB_VFSMAF == 0
 	ldtstop_sb();
 #endif
-	
 
-        for(loop=0;loop<100000;loop++){
+
+	for (loop=0;loop<100000;loop++){
 		msr = rdmsr(0xc0010042);
-                if(!(msr.lo & (1<<31))) break;
-        }
+		if (!(msr.lo & (1<<31)))
+			break;
+	}
 	vid_cur = msr.hi & 0x3f;
 
 	steps = 8; //??
-        while((fid_cur!=fid) && (steps-->0)) {
-		uint32_t fid_temp;	
-		if((fid_cur > (8-4)*2) && (fid> (8-4)*2)) {
-	        	if(fid_cur<fid) {
-        	        	fid_temp = fid_cur + 2;
-       	                } else {
-               	                fid_temp = fid_cur - 2;
-                       	}
-		}
-		else { //there is one < 8, So we need to lookup the table to find the fid_cur
+	while ((fid_cur != fid) && (steps-- > 0)) {
+		uint32_t fid_temp;
+		if ((fid_cur > (8-4)*2) && (fid> (8-4)*2)) {
+			if (fid_cur<fid) {
+				fid_temp = fid_cur + 2;
+				} else {
+					fid_temp = fid_cur - 2;
+				}
+		} else {
+			/* there is one < 8, So we need to lookup the table to
+			 * find the fid_cur */
 			int temp;
 			temp = next_fid_a[(fid_cur/2)*12+(fid/2)];
-			if(temp <= 0) break;
+			if (temp <= 0) break;
 			fid_temp = (temp-4) * 2;
 		}
-		if(fid_temp>fid_max) break;
+		if (fid_temp > fid_max)
+			break;
 
 		fid_cur = fid_temp;
 
-	        //set target fid
-        	msr.hi = (100000/5);
-	        msr.lo = (vid_cur<<8) | fid_cur;
+		/* set target fid */
+		msr.hi = (100000/5);
+		msr.lo = (vid_cur << 8) | fid_cur;
 #if SB_VFSMAF == 1
-	        msr.lo |= (1<<16); // init changes
+		msr.lo |= (1 << 16); /* init changes */
 #endif
-	        wrmsr(0xc0010041, msr);
+		wrmsr(0xc0010041, msr);
 #if SB_VFSMAF == 0
 		ldtstop_sb();
 #endif
 
 
 #if K8_SET_FIDVID_DEBUG == 1
-		if(showmessage) {
+		if (showmessage) {
 			print_debug_fv_8("\tapicid in set_fidvid = ", apicid);
-			print_debug_fv_64("ctrl msr fid, vid ", msr.hi, msr.lo); 
+			print_debug_fv_64("ctrl msr fid, vid ", msr.hi, msr.lo);
 		}
 #endif
 
-	        for(loop=0;loop<100000;loop++){
-        		msr = rdmsr(0xc0010042);
-	                if(!(msr.lo & (1<<31))) break;
-        	}
-	        fid_cur = msr.lo & 0x3f;
+		for (loop = 0; loop < 100000; loop++){
+			msr = rdmsr(0xc0010042);
+			if (!(msr.lo & (1 << 31)))
+				break;
+		}
+		fid_cur = msr.lo & 0x3f;
 
 #if K8_SET_FIDVID_DEBUG == 1
-		if(showmessage)	{	
-                        print_debug_fv_64("status msr fid, vid ", msr.hi, msr.lo);
+		if (showmessage)	{
+			 print_debug_fv_64("status msr fid, vid ", msr.hi, msr.lo);
 		}
 #endif
 	}
 
-        //set vid to final 
-        msr.hi = 1;
-        msr.lo = (vid<<8) | (fid_cur);
+	/* set vid to final */
+	msr.hi = 1;
+	msr.lo = (vid << 8) | (fid_cur);
 #if SB_VFSMAF == 1
-        msr.lo |= (1<<16); // init changes
+	msr.lo |= (1 << 16); // init changes
 #endif
-        wrmsr(0xc0010041, msr);
+	wrmsr(0xc0010041, msr);
 #if SB_VFSMAF == 0
 	ldtstop_sb();
 #endif
 
-        for(loop=0;loop<100000;loop++){
-                msr = rdmsr(0xc0010042);
-                if(!(msr.lo & (1<<31))) break;
-        }
-        vid_cur = msr.hi & 0x3f;
+	for (loop = 0; loop < 100000; loop++){
+		msr = rdmsr(0xc0010042);
+		if (!(msr.lo & (1 << 31)))
+			break;
+	}
+	vid_cur = msr.hi & 0x3f;
 
-	fidvid = (vid_cur<< 16) | (fid_cur<<8);
+	fidvid = (vid_cur << 16) | (fid_cur << 8);
 
-	if(showmessage) {
-		if(vid!=vid_cur) {
+	if (showmessage) {
+		if (vid!=vid_cur) {
 			print_err("set vid failed for apicid ="); print_err_hex8(apicidx);  print_err("\r\n");
 		}
-		if(fid!=fid_cur) {
+		if (fid!=fid_cur) {
 			print_err("set fid failed for apicid ="); print_err_hex8(apicidx); print_err("\r\n");
 		}
 	}
@@ -263,170 +271,178 @@ static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage)
 
 static void init_fidvid_ap(unsigned bsp_apicid, unsigned apicid)
 {
-
 	uint32_t send;
-        uint32_t readback = 0;
+	uint32_t readback = 0;
 	unsigned timeout = 1;
 	msr_t msr;
-        uint32_t vid_cur;
-        uint32_t fid_cur;
+	uint32_t vid_cur;
+	uint32_t fid_cur;
 	uint32_t fid_max;
 	int loop;
 
-        msr =  rdmsr(0xc0010042);
-	fid_max = ((msr.lo>>16) & 0x3f); //max fid
+	msr =	rdmsr(0xc0010042);
+	fid_max = ((msr.lo >> 16) & 0x3f); /* max fid */
 #if FX_SUPPORT
-        if(fid_max>=((25-4)*2)) { // FX max fid is 5G
-                fid_max = ((msr.lo>>8) & 0x3f) + 5*2; // max FID is min fid + 1G
-                if(fid_max >= ((25-4)*2)) {
-                        fid_max = (10-4)*2; // hard set to 2G
-                }
-        }
+	if (fid_max >= ((25-4) * 2)) { /* FX max fid is 5G */
+		fid_max = ((msr.lo>>8) & 0x3f) + 5*2; /* maxFID = minFID + 1G */
+		if (fid_max >= ((25-4) * 2)) {
+			fid_max = (10-4) * 2; // hard set to 2G
+		}
+	}
 #endif
 	send = fid_max<<8;
 
-        send |= ((msr.hi>>(48-32)) & 0x3f) << 16; //max vid
-	send |= (apicid<<24); // ap apicid
+	send |= ((msr.hi >> (48-32)) & 0x3f) << 16; /* max vid */
+	send |= (apicid << 24); /* ap apicid */
 
 #if K8_SET_FIDVID_ONE_BY_ONE == 1
-        vid_cur = msr.hi & 0x3f;
-        fid_cur = msr.lo & 0x3f;
+	vid_cur = msr.hi & 0x3f;
+	fid_cur = msr.lo & 0x3f;
 
-	// set to current
-        msr.hi = 1;
-        msr.lo = (vid_cur<<8) | (fid_cur);
-        wrmsr(0xc0010041, msr);
+	/* set to current */ 
+	msr.hi = 1;
+	msr.lo = (vid_cur << 8) | (fid_cur);
+	wrmsr(0xc0010041, msr);
 #endif
 
 	timeout = wait_cpu_state(bsp_apicid, 1);
-	if(timeout) {
-	        print_initcpu8("fidvid_ap_stage1: time out while reading from BSP on ", apicid);
+	if (timeout) {
+		print_initcpu8("fidvid_ap_stage1: time out while reading from BSP on ", apicid);
 	}
-        //send signal to BSP about this AP max fid and vid
-        lapic_write(LAPIC_MSG_REG, send | 1); //AP at state 1 that sent our fid and vid
+	/* send signal to BSP about this AP max fid and vid */
+	/* AP at state 1 that sent our fid and vid */
+	lapic_write(LAPIC_MSG_REG, send | 1);
 
-//	wait_cpu_state(bsp_apicid, 2);// don't need we can use apicid directly	
+//	wait_cpu_state(bsp_apicid, 2); /* don't need we can use apicid directly */
 	loop = 1000000;
-        while(--loop>0) {
-		//remote read BSP signal that include vid and fid that need to set
-                if(lapic_remote_read(bsp_apicid, LAPIC_MSG_REG, &readback)!=0) continue;
-                if(((readback>>24) & 0xff) == apicid) break; // it is this cpu turn
-        }
+	while (--loop > 0) {
+		/* remote read BSP signal that include vid/fid that need to set */
+		if (lapic_remote_read(bsp_apicid, LAPIC_MSG_REG, &readback)!=0)
+			continue;
+		if (((readback >> 24) & 0xff) == apicid)
+			break; /* it is this cpu turn */
+	}
 
-	if(loop>0) {
+	if (loop > 0) {
 	#if K8_SET_FIDVID_ONE_BY_ONE == 1
-       		readback = set_fidvid(apicid, readback & 0xffff00, 1); // this AP
+			readback = set_fidvid(apicid, readback & 0xffff00, 1); // this AP
 	#else
 		readback = set_fidvid_without_init(readback & 0xffff00); // this AP
 	#endif
-       		//send signal to BSP that this AP fid/vid is set // allow to change state2 is together with apicid
-	        send = (apicid<<24) | (readback & 0x00ffff00); // AP at state that We set the requested fid/vid
+		/* send signal to BSP that this AP fid/vid is set */
+		/* allow to change state2 is together with apicid */
+		/* AP at state that We set the requested fid/vid */
+		send = (apicid<<24) | (readback & 0x00ffff00); 
 	} else {
-	        print_initcpu8("fidvid_ap_stage2: time out while reading from BSP on ", apicid);
+		print_initcpu8("fidvid_ap_stage2: time out while reading from BSP on ", apicid);
 	}
 
-       	lapic_write(LAPIC_MSG_REG, send | 2);
+		lapic_write(LAPIC_MSG_REG, send | 2);
 
 	timeout = wait_cpu_state(bsp_apicid, 3);
-	if(timeout) {
-	        print_initcpu8("fidvid_ap_stage3: time out while reading from BSP on ", apicid);
+	if (timeout) {
+		print_initcpu8("fidvid_ap_stage3: time out while reading from BSP on ", apicid);
 	}
 }
 
 static unsigned calc_common_fidvid(unsigned fidvid, unsigned fidvidx)
 {
-	/* FIXME: need to check the change path to verify if it is reachable when common fid is small than 1.6G */	
-	if((fidvid & 0xff00)<=(fidvidx & 0xff00)) {
+	/* FIXME: need to check the change path to verify if it is reachable 
+	 * when common fid is small than 1.6G */
+	if ((fidvid & 0xff00) <= (fidvidx & 0xff00)) {
 		return fidvid;
 	}
 	else {
 		return fidvidx;
 	}
-} 
+}
 
 struct fidvid_st {
 	unsigned common_fidvid;
 };
 
-static void init_fidvid_bsp_stage1(unsigned ap_apicid, void *gp ) 
-{		
-		unsigned readback = 0;
-		unsigned timeout = 1;
-
-		struct fidvid_st *fvp = gp;
-		int loop;
-		
-                print_debug_fv("state 1: ap_apicid=", ap_apicid);
-
-		loop = 1000000;
-                while(--loop > 0) {
-  	              if(lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback)!=0) continue;
-                      if((readback & 0xff) == 1) {
-				timeout = 0;
-				break; //target ap is in stage 1 
-		      }
-                }
-		if(timeout) {
-		        print_initcpu8("fidvid_bsp_stage1: time out while reading from ap ", ap_apicid);
-			return;
-		}
+static void init_fidvid_bsp_stage1(unsigned ap_apicid, void *gp )
+{
+	unsigned readback = 0;
+	unsigned timeout = 1;
+
+	struct fidvid_st *fvp = gp;
+	int loop;
+
+	print_debug_fv("state 1: ap_apicid=", ap_apicid);
 
-                print_debug_fv("\treadback=", readback);
+	loop = 1000000;
+	while (--loop > 0) {
+		if (lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback)!=0)
+			continue;
+		if ((readback & 0xff) == 1) {
+			timeout = 0;
+			break; /* target ap is in stage 1 */
+		}
+	}
+	if (timeout) {
+		print_initcpu8("fidvid_bsp_stage1: time out while reading from ap ", ap_apicid);
+		return;
+	}
 
-                fvp->common_fidvid = calc_common_fidvid(fvp->common_fidvid, readback & 0xffff00);
+	print_debug_fv("\treadback=", readback);
 
-                print_debug_fv("\tcommon_fidvid=", fvp->common_fidvid);
+	fvp->common_fidvid = calc_common_fidvid(fvp->common_fidvid, readback & 0xffff00);
 
+	print_debug_fv("\tcommon_fidvid=", fvp->common_fidvid);
 }
+
 static void init_fidvid_bsp_stage2(unsigned ap_apicid, void *gp)
 {
-		unsigned readback = 0;
-		unsigned timeout = 1;
-
-		struct fidvid_st *fvp = gp;
-		int loop;
-
-                print_debug_fv("state 2: ap_apicid=", ap_apicid);
-
-                lapic_write(LAPIC_MSG_REG, fvp->common_fidvid | (ap_apicid<<24) | 2); // all set to state2
-		
-		loop = 1000000;	
-                while(--loop > 0) {
-                	if(lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback)!=0) continue;
-                        if((readback & 0xff) == 2) { 
-				timeout = 0;
-				break; // target ap is stage 2, and it'd FID has beed set
-			}
-                }
-
-		if(timeout) {
-		        print_initcpu8("fidvid_bsp_stage2: time out while reading from ap ", ap_apicid);
-			return;
+	unsigned readback = 0;
+	unsigned timeout = 1;
+
+	struct fidvid_st *fvp = gp;
+	int loop;
+
+	print_debug_fv("state 2: ap_apicid=", ap_apicid);
+
+	/* all set to state2 */
+	lapic_write(LAPIC_MSG_REG, fvp->common_fidvid | (ap_apicid<<24) | 2);
+
+	loop = 1000000;
+	while (--loop > 0) {
+		if (lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback)!=0)
+			continue;
+		if ((readback & 0xff) == 2) {
+			timeout = 0;
+			break; /* target ap is stage 2, it's FID has beed set */
 		}
+	}
+
+	if (timeout) {
+		print_initcpu8("fidvid_bsp_stage2: time out while reading from ap ", ap_apicid);
+		return;
+	}
 
-                print_debug_fv("\treadback=", readback);
+	print_debug_fv("\treadback=", readback);
 }
 
 #if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
 struct ap_apicid_st {
 	unsigned num;
-	unsigned apicid[16]; // 8 way dual core need 16
+	unsigned apicid[16]; /* 8 way dual core need 16 */
 	/* FIXME: 32 node quad core, may need 128 */
 };
 
 static void store_ap_apicid(unsigned ap_apicid, void *gp)
 {
 	struct ap_apicid_st *p = gp;
-	
+
 	p->apicid[p->num++] = ap_apicid;
 
 }
 #endif
 
-static void init_fidvid_bsp(unsigned bsp_apicid) 
+static void init_fidvid_bsp(unsigned bsp_apicid)
 {
-        uint32_t vid_max;
-        uint32_t fid_max;
+	uint32_t vid_max;
+	uint32_t fid_max;
 
 	struct fidvid_st fv;
 
@@ -435,35 +451,35 @@ static void init_fidvid_bsp(unsigned bsp_apicid)
 	unsigned i;
 #endif
 
-	
-        msr_t msr;
-        msr =  rdmsr(0xc0010042);
-        fid_max = ((msr.lo>>16) & 0x3f); //max fid
+	msr_t msr;
+	msr =	rdmsr(0xc0010042);
+	fid_max = ((msr.lo >> 16) & 0x3f); /* max fid */
 #if FX_SUPPORT == 1
-	if(fid_max>=((25-4)*2)) { // FX max fid is 5G
-		fid_max = ((msr.lo>>8) & 0x3f) + 5*2; // max FID is min fid + 1G	
-		if(fid_max >= ((25-4)*2)) {
-			fid_max = (10-4)*2; // hard set to 2G
+	if (fid_max >= ((25-4) * 2)) { /* FX max fid is 5G */
+		fid_max = ((msr.lo >> 8) & 0x3f) + 5*2; /* maxFID = minFID + 1G */
+		if (fid_max >= ((25-4) * 2)) {
+			fid_max = (10-4) * 2; /* hard set to 2G */
 		}
 	}
 #endif
-        vid_max = ((msr.hi>>(48-32)) & 0x3f); //max vid
-	fv.common_fidvid = (fid_max<<8)|(vid_max<<16);
+	vid_max = ((msr.hi>>(48-32)) & 0x3f); //max vid
+	fv.common_fidvid = (fid_max << 8)|(vid_max << 16);
 
 
-        // for all APs (We know the APIC ID of all APs even the APIC ID is lifted)
-        // remote read from AP about max fid/vid
+	/* for all APs (We know the APIC ID of all APs even the APIC ID is lifted)
+	 * remote read from AP about max fid/vid */
 
-	//let all ap trains to state 1
-	lapic_write(LAPIC_MSG_REG,  (bsp_apicid<<24) | 1);  
+	/* let all ap trains to state 1 */
+	lapic_write(LAPIC_MSG_REG,  (bsp_apicid << 24) | 1);
 
-        // calculate the common max fid/vid that could be used for all APs and BSP
+	/* calculate the common max fid/vid that could be used for 
+	 * all APs and BSP */
 #if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
 	ap_apicidx.num = 0;
-	
+
 	for_each_ap(bsp_apicid, K8_SET_FIDVID_CORE0_ONLY, store_ap_apicid, &ap_apicidx);
 
-	for(i=0;i<ap_apicidx.num;i++) {
+	for (i = 0; i < ap_apicidx.num; i++) {
 		init_fidvid_bsp_stage1(ap_apicidx.apicid[i], &fv);
 	}
 #else
@@ -473,20 +489,21 @@ static void init_fidvid_bsp(unsigned bsp_apicid)
 
 #if 0
 	unsigned fid, vid;
-	// Can we use max only? So we can only set fid in one around, otherwise we need to set that to max after raminit
-	// set fid vid to DQS training required
+	/* Can we use max only? So we can only set fid in one around,
+	 * otherwise we need to set that to max after raminit */
+	/* set fid vid to DQS training required */
 	fid = (fv.common_fidvid >> 8)  & 0x3f;
 	vid = (fv.common_fidvid >> 16) & 0x3f;
 
-        if(fid>(10-4)*2) {
-                fid = (10-4)*2; //x10 
-        }
+	if (fid > (10-4) * 2) {
+		fid = (10-4) * 2; // x10
+	}
 
-        if(vid>=0x1f) {
-                vid+= 4; //unit is 12.5mV
-        } else {
-                vid+= 2; //unit is 25mV
-        }
+	if (vid >= 0x1f) {
+		vid += 4; /* unit is 12.5mV */
+	} else {
+		vid += 2; /* unit is 25mV */
+	}
 
 	fv.common_fidvid = (fid<<8) | (vid<<16);
 
@@ -494,40 +511,41 @@ static void init_fidvid_bsp(unsigned bsp_apicid)
 
 #endif
 
-#if K8_SET_FIDVID_ONE_BY_ONE == 1 
-        // set BSP fid and vid
+#if K8_SET_FIDVID_ONE_BY_ONE == 1
+	/* set BSP fid and vid */
 	print_debug_fv("bsp apicid=", bsp_apicid);
 	fv.common_fidvid = set_fidvid(bsp_apicid, fv.common_fidvid, 1);
-        print_debug_fv("common_fidvid=", fv.common_fidvid);
-
+	print_debug_fv("common_fidvid=", fv.common_fidvid);
 #endif
 
-        //for all APs ( We know the APIC ID of all AP even the APIC ID is lifted)
-        // send signal to the AP it could change it's fid/vid
-        // remote read singnal from AP that AP is done
+	/* For all APs ( We know the APIC ID of all AP even the APIC ID is lifted)
+	 *  send signal to the AP it could change it's fid/vid */
+	/* remote read singnal from AP that AP is done */
 
-        fv.common_fidvid &= 0xffff00;
+	fv.common_fidvid &= 0xffff00;
 
-	//set state 2 allow is in init_fidvid_bsp_stage2
+	/* set state 2 allow is in init_fidvid_bsp_stage2 */
 #if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
-        for(i=0;i<ap_apicidx.num;i++) {
-                init_fidvid_bsp_stage2(ap_apicidx.apicid[i], &fv);
-        }
+	for (i = 0; i < ap_apicidx.num; i++) {
+		init_fidvid_bsp_stage2(ap_apicidx.apicid[i], &fv);
+	}
 #else
 	for_each_ap(bsp_apicid, K8_SET_FIDVID_CORE0_ONLY, init_fidvid_bsp_stage2, &fv);
 #endif
 
 #if K8_SET_FIDVID_ONE_BY_ONE == 0
-        // set BSP fid and vid
+	/* set BSP fid and vid */
 	print_debug_fv("bsp apicid=", bsp_apicid);
 	fv.common_fidvid = set_fidvid(bsp_apicid, fv.common_fidvid, 1);
 	print_debug_fv("common_fidvid=", fv.common_fidvid);
 
 #endif
 
-	lapic_write(LAPIC_MSG_REG, fv.common_fidvid | (bsp_apicid<<24) | 3); // clear the state
+	/* clear the state */
+	lapic_write(LAPIC_MSG_REG, fv.common_fidvid | (bsp_apicid << 24) | 3);
 
-	//here  wait a while, so last ap could read pack, and stop it, don't call init_timer too early or just don't use init_timer
+	/* here wait a while, so last ap could read pack, and stop it, don't
+	 * call init_timer too early or just don't use init_timer */
 
 }