include/device: Split i2c.h into three

Split `i2c.h` into three pieces to ease reuse of the generic defi-
nitions. No code is changed.

* `i2c.h`        - keeps the generic definitions
* `i2c_simple.h` - holds the current, limited to one controller driver
                   per board, devicetree independent I2C interface
* `i2c_bus.h`    - will become the devicetree compatible interface for
                   native I2C (e.g. non-SMBus) controllers

Change-Id: I382d45c70f9314588663e1284f264f877469c74d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

1 files changed, 0 insertions, 159 deletions

diff --git a/src/include/device/i2c.h b/src/include/device/i2c.h
index 9939bc60bf3e..d6ee15aa5ae7 100644
--- a/src/include/device/i2c.h
+++ b/src/include/device/i2c.h
@@ -17,7 +17,6 @@
 #define _DEVICE_I2C_H_
 
 #include <stdint.h>
-#include <stdlib.h>
 
 /**
  * struct i2c_msg - an I2C transaction segment beginning with START
@@ -67,162 +66,4 @@ enum i2c_address_mode {
 	I2C_MODE_10_BIT
 };
 
-
-int platform_i2c_transfer(unsigned int bus, struct i2c_msg *segments,
-			  int count);
-
-#define SOFTWARE_I2C_MAX_BUS 10		/* increase as necessary */
-
-struct software_i2c_ops {
-	void (*set_sda)(unsigned int bus, int high);
-	void (*set_scl)(unsigned int bus, int high);
-	int (*get_sda)(unsigned int bus);
-	int (*get_scl)(unsigned int bus);
-};
-
-extern struct software_i2c_ops *software_i2c[];
-
-int software_i2c_transfer(unsigned int bus, struct i2c_msg *segments,
-			  int count);
-void software_i2c_wedge_ack(unsigned int bus, u8 slave);
-void software_i2c_wedge_read(unsigned int bus, u8 slave, u8 reg, int bit_count);
-void software_i2c_wedge_write(unsigned int bus, u8 slave, u8 reg,
-			      int bit_count);
-
-int i2c_read_field(unsigned int bus, uint8_t slave, uint8_t reg, uint8_t *data,
-		   uint8_t mask, uint8_t shift);
-int i2c_write_field(unsigned int bus, uint8_t slave, uint8_t reg, uint8_t data,
-		    uint8_t mask, uint8_t shift);
-
-/*
- * software_i2c is supposed to be a debug feature. It's usually not compiled in,
- * but when it is it can be dynamically enabled at runtime for certain busses.
- * Need this ugly stub to arbitrate since I2C device drivers hardcode
- * 'i2c_transfer()' as their entry point.
- */
-static inline int i2c_transfer(unsigned int bus, struct i2c_msg *segments,
-			       int count)
-{
-	if (CONFIG_SOFTWARE_I2C)
-		if (bus < SOFTWARE_I2C_MAX_BUS && software_i2c[bus])
-			return software_i2c_transfer(bus, segments, count);
-
-	return platform_i2c_transfer(bus, segments, count);
-}
-
-/*
- * Read a raw chunk of data in one segment and one frame.
- *
- * [start][slave addr][r][data][stop]
- */
-static inline int i2c_read_raw(unsigned int bus, uint8_t slave, uint8_t *data,
-			       int len)
-{
-	struct i2c_msg seg = {
-		.flags = I2C_M_RD, .slave = slave, .buf = data, .len = len
-	};
-
-	return i2c_transfer(bus, &seg, 1);
-}
-
-/*
- * Write a raw chunk of data in one segment and one frame.
- *
- * [start][slave addr][w][data][stop]
- */
-static inline int i2c_write_raw(unsigned int bus, uint8_t slave, uint8_t *data,
-				int len)
-{
-	struct i2c_msg seg = {
-		.flags = 0, .slave = slave, .buf = data, .len = len
-	};
-
-	return i2c_transfer(bus, &seg, 1);
-}
-
-/**
- * Read multi-bytes with two segments in one frame
- *
- * [start][slave addr][w][register addr][start][slave addr][r][data...][stop]
- */
-static inline int i2c_read_bytes(unsigned int bus, uint8_t slave, uint8_t reg,
-				 uint8_t *data, int len)
-{
-	struct i2c_msg seg[2];
-
-	seg[0].flags = 0;
-	seg[0].slave = slave;
-	seg[0].buf   = &reg;
-	seg[0].len   = 1;
-	seg[1].flags = I2C_M_RD;
-	seg[1].slave = slave;
-	seg[1].buf   = data;
-	seg[1].len   = len;
-
-	return i2c_transfer(bus, seg, ARRAY_SIZE(seg));
-}
-
-/**
- * Read a byte with two segments in one frame
- *
- * [start][slave addr][w][register addr][start][slave addr][r][data][stop]
- */
-static inline int i2c_readb(unsigned int bus, uint8_t slave, uint8_t reg,
-			    uint8_t *data)
-{
-	struct i2c_msg seg[2];
-
-	seg[0].flags = 0;
-	seg[0].slave = slave;
-	seg[0].buf   = &reg;
-	seg[0].len   = 1;
-	seg[1].flags = I2C_M_RD;
-	seg[1].slave = slave;
-	seg[1].buf   = data;
-	seg[1].len   = 1;
-
-	return i2c_transfer(bus, seg, ARRAY_SIZE(seg));
-}
-
-/**
- * Write a byte with one segment in one frame.
- *
- * [start][slave addr][w][register addr][data][stop]
- */
-static inline int i2c_writeb(unsigned int bus, uint8_t slave, uint8_t reg,
-			     uint8_t data)
-{
-	struct i2c_msg seg;
-	uint8_t buf[] = {reg, data};
-
-	seg.flags = 0;
-	seg.slave = slave;
-	seg.buf   = buf;
-	seg.len   = ARRAY_SIZE(buf);
-
-	return i2c_transfer(bus, &seg, 1);
-}
-
-/* I2C bus operation for ramstage drivers */
-struct device;
-struct i2c_bus_operations {
-	/*
-	 * This is an SOC specific method that can be provided to translate the
-	 * 'struct device' for an I2C controller into a unique I2C bus number.
-	 * Returns -1 if the bus number for this device cannot be determined.
-	 */
-	int (*dev_to_bus)(struct device *dev);
-};
-
-/* Return I2C bus number for provided device, -1 if not found */
-int i2c_dev_find_bus(struct device *dev);
-
-/* Variants of I2C helper functions that take a device instead of bus number */
-int i2c_dev_transfer(struct device *dev, struct i2c_msg *segments, int count);
-int i2c_dev_readb(struct device *dev, uint8_t reg, uint8_t *data);
-int i2c_dev_writeb(struct device *dev, uint8_t reg, uint8_t data);
-int i2c_dev_read_bytes(struct device *dev, uint8_t reg, uint8_t *data, int len);
-int i2c_dev_read_raw(struct device *dev, uint8_t *data, int len);
-int i2c_dev_write_raw(struct device *dev, uint8_t *data, int len);
-
 #endif	/* _DEVICE_I2C_H_ */