src/include: Wrap lines at 80 columns

Fix the following warning detected by checkpatch.pl:

WARNING: line over 80 characters

Changed a few comments to reduce line length.  File
src/include/cpu/amd/vr.h was skipped.

TEST=Build and run on Galileo Gen2

Change-Id: Ie3c07111acc1f89923fb31135684a6d28a505b61
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18687
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>

8 files changed, 113 insertions, 62 deletions

diff --git a/src/include/device/azalia_device.h b/src/include/device/azalia_device.h
index 2ca881cb135a..53aad9717572 100644
--- a/src/include/device/azalia_device.h
+++ b/src/include/device/azalia_device.h
@@ -33,14 +33,19 @@ extern const u32 cim_verb_data_size;
 extern const u32 pc_beep_verbs[];
 extern const u32 pc_beep_verbs_size;
 
-#define AZALIA_ARRAY_SIZES const u32 pc_beep_verbs_size = ARRAY_SIZE(pc_beep_verbs); \
+#define AZALIA_ARRAY_SIZES const u32 pc_beep_verbs_size =	\
+	ARRAY_SIZE(pc_beep_verbs);				\
 	const u32 cim_verb_data_size = sizeof(cim_verb_data)
 
-#define AZALIA_PIN_CFG(codec, pin, val)		    \
-	(((codec) << 28) | ((pin) << 20) | (0x71c << 8) | ((val) & 0xff)),	\
-	(((codec) << 28) | ((pin) << 20) | (0x71d << 8) | (((val) >> 8) & 0xff)), \
-	(((codec) << 28) | ((pin) << 20) | (0x71e << 8) | (((val) >> 16) & 0xff)), \
-	(((codec) << 28) | ((pin) << 20) | (0x71f << 8) | (((val) >> 24) & 0xff))
+#define AZALIA_PIN_CFG(codec, pin, val)			\
+	(((codec) << 28) | ((pin) << 20) | (0x71c << 8)	\
+		| ((val) & 0xff)),			\
+	(((codec) << 28) | ((pin) << 20) | (0x71d << 8)	\
+		| (((val) >> 8) & 0xff)),		\
+	(((codec) << 28) | ((pin) << 20) | (0x71e << 8)	\
+		| (((val) >> 16) & 0xff)),		\
+	(((codec) << 28) | ((pin) << 20) | (0x71f << 8)	\
+		| (((val) >> 24) & 0xff))
 
 #define AZALIA_SUBVENDOR(codec, val)		    \
 	(((codec) << 28) | (0x01720 << 8) | ((val) & 0xff)),	\
diff --git a/src/include/device/device.h b/src/include/device/device.h
index d3efdd23034f..bb0d0ca8b859 100644
--- a/src/include/device/device.h
+++ b/src/include/device/device.h
@@ -54,11 +54,13 @@ struct device_operations {
 	void (*set_link)(device_t dev, unsigned int link);
 	void (*reset_bus)(struct bus *bus);
 #if CONFIG_GENERATE_SMBIOS_TABLES
-	int (*get_smbios_data)(device_t dev, int *handle, unsigned long *current);
+	int (*get_smbios_data)(device_t dev, int *handle,
+		unsigned long *current);
 	void (*get_smbios_strings)(device_t dev, struct smbios_type11 *t);
 #endif
 #if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES)
-	unsigned long (*write_acpi_tables)(device_t dev, unsigned long start,  struct acpi_rsdp *rsdp);
+	unsigned long (*write_acpi_tables)(device_t dev, unsigned long start,
+		struct acpi_rsdp *rsdp);
 	void (*acpi_fill_ssdt_generator)(device_t dev);
 	void (*acpi_inject_dsdt_generator)(device_t dev);
 	const char *(*acpi_name)(device_t dev);
@@ -84,7 +86,7 @@ struct bus {
 
 	ROMSTAGE_CONST struct device *dev;	/* This bridge device */
 	ROMSTAGE_CONST struct device *children;	/* devices behind this bridge */
-	ROMSTAGE_CONST struct bus *next;	/* The next bridge on this device */
+	ROMSTAGE_CONST struct bus *next;    /* The next bridge on this device */
 	unsigned int	bridge_ctrl;	/* Bridge control register */
 	uint16_t	bridge_cmd;		/* Bridge command register */
 	unsigned char	link_num;	/* The index of this link */
@@ -126,7 +128,7 @@ struct device {
 	unsigned int	class;		/* 3 bytes: (base, sub, prog-if) */
 	unsigned int	hdr_type;	/* PCI header type */
 	unsigned int    enabled : 1;	/* set if we should enable the device */
-	unsigned int    initialized : 1; /* set if we have initialized the device */
+	unsigned int  initialized : 1; /* 1 if we have initialized the device */
 	unsigned int    on_mainboard : 1;
 	struct pci_irq_info pci_irq_info[4];
 	u8 command;
@@ -205,7 +207,8 @@ device_t dev_find_lapic(unsigned int apic_id);
 int dev_count_cpu(void);
 
 device_t add_cpu_device(struct bus *cpu_bus, unsigned int apic_id, int enabled);
-void set_cpu_topology(device_t cpu, unsigned int node, unsigned int package, unsigned int core, unsigned int thread);
+void set_cpu_topology(device_t cpu, unsigned int node, unsigned int package,
+	unsigned int core, unsigned int thread);
 
 #define amd_cpu_topology(cpu, node, core) \
 	set_cpu_topology(cpu, node, 0, core, 0)
@@ -252,7 +255,8 @@ void scan_lpc_bus(device_t bus);
 	fixed_mem_resource(dev, idx, basek, sizek, IORESOURCE_CACHEABLE)
 
 #define reserved_ram_resource(dev, idx, basek, sizek) \
-	fixed_mem_resource(dev, idx, basek, sizek, IORESOURCE_CACHEABLE | IORESOURCE_RESERVE)
+	fixed_mem_resource(dev, idx, basek, sizek, IORESOURCE_CACHEABLE \
+		| IORESOURCE_RESERVE)
 
 #define bad_ram_resource(dev, idx, basek, sizek) \
 	reserved_ram_resource((dev), (idx), (basek), (sizek))
@@ -271,7 +275,7 @@ u32 find_pci_tolm(struct bus *bus);
 ROMSTAGE_CONST struct device *dev_find_slot(unsigned int bus,
 						unsigned int devfn);
 ROMSTAGE_CONST struct device *dev_find_next_pci_device(
-						ROMSTAGE_CONST struct device *previous_dev);
+				ROMSTAGE_CONST struct device *previous_dev);
 ROMSTAGE_CONST struct device *dev_find_slot_on_smbus(unsigned int bus,
 							unsigned int addr);
 ROMSTAGE_CONST struct device *dev_find_slot_pnp(u16 port, u16 device);
diff --git a/src/include/device/hypertransport_def.h b/src/include/device/hypertransport_def.h
index 8af94d94ac31..4b340e862e97 100644
--- a/src/include/device/hypertransport_def.h
+++ b/src/include/device/hypertransport_def.h
@@ -21,8 +21,10 @@
 
 static inline bool offset_unit_id(bool is_sb_ht_chain)
 {
-	bool need_offset = (CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20);
-	return need_offset && (!CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY || is_sb_ht_chain);
+	bool need_offset = (CONFIG_HT_CHAIN_UNITID_BASE != 1)
+		|| (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20);
+	return need_offset && (!CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
+		|| is_sb_ht_chain);
 }
 
 #endif /* DEVICE_HYPERTRANSPORT_DEF_H */
diff --git a/src/include/device/pci.h b/src/include/device/pci.h
index 952f6e3d3990..4f6dfbc590c3 100644
--- a/src/include/device/pci.h
+++ b/src/include/device/pci.h
@@ -42,9 +42,12 @@ struct pci_bus_operations {
 	uint8_t   (*read8)(struct bus *pbus, int bus, int devfn, int where);
 	uint16_t (*read16)(struct bus *pbus, int bus, int devfn, int where);
 	uint32_t (*read32)(struct bus *pbus, int bus, int devfn, int where);
-	void     (*write8)(struct bus *pbus, int bus, int devfn, int where, uint8_t val);
-	void    (*write16)(struct bus *pbus, int bus, int devfn, int where, uint16_t val);
-	void    (*write32)(struct bus *pbus, int bus, int devfn, int where, uint32_t val);
+	void     (*write8)(struct bus *pbus, int bus, int devfn, int where,
+			uint8_t val);
+	void    (*write16)(struct bus *pbus, int bus, int devfn, int where,
+			uint16_t val);
+	void    (*write32)(struct bus *pbus, int bus, int devfn, int where,
+			uint32_t val);
 };
 
 struct pci_driver {
diff --git a/src/include/device/pci_def.h b/src/include/device/pci_def.h
index a1236eff2deb..1674ee1e4953 100644
--- a/src/include/device/pci_def.h
+++ b/src/include/device/pci_def.h
@@ -23,7 +23,8 @@
 #define PCI_STATUS		0x06	/* 16 bits */
 #define  PCI_STATUS_CAP_LIST	0x10	/* Support Capability List */
 #define  PCI_STATUS_66MHZ	0x20	/* Support 66 Mhz PCI 2.1 bus */
-#define  PCI_STATUS_UDF		0x40	/* Support User Definable Features [obsolete] */
+/* Support User Definable Features [obsolete] */
+#define  PCI_STATUS_UDF		0x40
 #define  PCI_STATUS_FAST_BACK	0x80	/* Accept fast-back to back */
 #define  PCI_STATUS_PARITY	0x100	/* Detected parity error */
 #define  PCI_STATUS_DEVSEL_MASK	0x600	/* DEVSEL timing */
@@ -82,11 +83,13 @@
 #define PCI_CARDBUS_CIS		0x28
 #define PCI_SUBSYSTEM_VENDOR_ID	0x2c
 #define PCI_SUBSYSTEM_ID	0x2e
-#define PCI_ROM_ADDRESS		0x30	/* Bits 31..11 are address, 10..1 reserved */
+/* Bits 31..11 are address, 10..1 reserved */
+#define PCI_ROM_ADDRESS		0x30
 #define  PCI_ROM_ADDRESS_ENABLE	0x01
 #define PCI_ROM_ADDRESS_MASK	(~0x7ffUL)
 
-#define PCI_CAPABILITY_LIST	0x34	/* Offset of first capability list entry */
+/* Offset of first capability list entry */
+#define PCI_CAPABILITY_LIST	0x34
 
 /* 0x35-0x3b are reserved */
 #define PCI_INTERRUPT_LINE	0x3c	/* 8 bits */
@@ -97,15 +100,18 @@
 /* Header type 1 (PCI-to-PCI bridges) */
 #define PCI_PRIMARY_BUS		0x18	/* Primary bus number */
 #define PCI_SECONDARY_BUS	0x19	/* Secondary bus number */
-#define PCI_SUBORDINATE_BUS	0x1a	/* Highest bus number behind the bridge */
-#define PCI_SEC_LATENCY_TIMER	0x1b	/* Latency timer for secondary interface */
+/* Highest bus number behind the bridge */
+#define PCI_SUBORDINATE_BUS	0x1a
+/* Latency timer for secondary interface */
+#define PCI_SEC_LATENCY_TIMER	0x1b
 #define PCI_IO_BASE		0x1c	/* I/O range behind the bridge */
 #define PCI_IO_LIMIT		0x1d
 #define  PCI_IO_RANGE_TYPE_MASK	0x0f	/* I/O bridging type */
 #define  PCI_IO_RANGE_TYPE_16	0x00
 #define  PCI_IO_RANGE_TYPE_32	0x01
 #define  PCI_IO_RANGE_MASK	~0x0f
-#define PCI_SEC_STATUS		0x1e	/* Secondary status register, only bit 14 used */
+/* Secondary status register, only bit 14 used */
+#define PCI_SEC_STATUS		0x1e
 #define PCI_MEMORY_BASE		0x20	/* Memory range behind */
 #define PCI_MEMORY_LIMIT	0x22
 #define  PCI_MEMORY_RANGE_TYPE_MASK 0x0f
@@ -116,22 +122,26 @@
 #define  PCI_PREF_RANGE_TYPE_32	0x00
 #define  PCI_PREF_RANGE_TYPE_64	0x01
 #define  PCI_PREF_RANGE_MASK	~0x0f
-#define PCI_PREF_BASE_UPPER32	0x28	/* Upper half of prefetchable memory range */
+/* Upper half of prefetchable memory range */
+#define PCI_PREF_BASE_UPPER32	0x28
 #define PCI_PREF_LIMIT_UPPER32	0x2c
 #define PCI_IO_BASE_UPPER16	0x30	/* Upper half of I/O addresses */
 #define PCI_IO_LIMIT_UPPER16	0x32
 /* 0x34 same as for htype 0 */
 /* 0x35-0x3b is reserved */
-#define PCI_ROM_ADDRESS1	0x38	/* Same as PCI_ROM_ADDRESS, but for htype 1 */
+/* Same as PCI_ROM_ADDRESS, but for htype 1 */
+#define PCI_ROM_ADDRESS1	0x38
 /* 0x3c-0x3d are same as for htype 0 */
 #define PCI_BRIDGE_CONTROL	0x3e
-#define  PCI_BRIDGE_CTL_PARITY	0x01	/* Enable parity detection on secondary interface */
+/* Enable parity detection on secondary interface */
+#define  PCI_BRIDGE_CTL_PARITY	0x01
 #define  PCI_BRIDGE_CTL_SERR	0x02	/* The same for SERR forwarding */
 #define  PCI_BRIDGE_CTL_NO_ISA	0x04	/* Disable bridging of ISA ports */
 #define  PCI_BRIDGE_CTL_VGA	0x08	/* Forward VGA addresses */
 #define  PCI_BRIDGE_CTL_MASTER_ABORT 0x20  /* Report master aborts */
 #define  PCI_BRIDGE_CTL_BUS_RESET 0x40	/* Secondary bus reset */
-#define  PCI_BRIDGE_CTL_FAST_BACK 0x80	/* Fast Back2Back enabled on secondary interface */
+/* Fast Back2Back enabled on secondary interface */
+#define  PCI_BRIDGE_CTL_FAST_BACK 0x80
 
 /* Header type 2 (CardBus bridges) */
 #define PCI_CB_CAPABILITY_LIST	0x14
@@ -156,19 +166,23 @@
 #define  PCI_CB_IO_RANGE_MASK	~0x03
 /* 0x3c-0x3d are same as for htype 0 */
 #define PCI_CB_BRIDGE_CONTROL	0x3e
-#define  PCI_CB_BRIDGE_CTL_PARITY	0x01	/* Similar to standard bridge control register */
+/* Similar to standard bridge control register */
+#define  PCI_CB_BRIDGE_CTL_PARITY	0x01
 #define  PCI_CB_BRIDGE_CTL_SERR		0x02
 #define  PCI_CB_BRIDGE_CTL_ISA		0x04
 #define  PCI_CB_BRIDGE_CTL_VGA		0x08
 #define  PCI_CB_BRIDGE_CTL_MASTER_ABORT	0x20
 #define  PCI_CB_BRIDGE_CTL_CB_RESET	0x40	/* CardBus reset */
-#define  PCI_CB_BRIDGE_CTL_16BIT_INT	0x80	/* Enable interrupt for 16-bit cards */
-#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100	/* Prefetch enable for both memory regions */
+/* Enable interrupt for 16-bit cards */
+#define  PCI_CB_BRIDGE_CTL_16BIT_INT	0x80
+/* Prefetch enable for both memory regions */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100
 #define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
 #define  PCI_CB_BRIDGE_CTL_POST_WRITES	0x400
 #define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40
 #define PCI_CB_SUBSYSTEM_ID	0x42
-#define PCI_CB_LEGACY_MODE_BASE	0x44	/* 16-bit PC Card legacy mode base address (ExCa) */
+/* 16-bit PC Card legacy mode base address (ExCa) */
+#define PCI_CB_LEGACY_MODE_BASE	0x44
 /* 0x48-0x7f reserved */
 
 /* Capability lists */
@@ -223,7 +237,8 @@
 #define  PCI_PM_CTRL_PME_STATUS	0x8000	/* PME pin status */
 #define PCI_PM_PPB_EXTENSIONS	6	/* PPB support extensions (??) */
 #define  PCI_PM_PPB_B2_B3	0x40	/* Stop clock when in D3hot (??) */
-#define  PCI_PM_BPCC_ENABLE	0x80	/* Bus power/clock control enable (??) */
+/* Bus power/clock control enable (??) */
+#define  PCI_PM_BPCC_ENABLE	0x80
 #define PCI_PM_DATA_REGISTER	7	/* (??) */
 #define PCI_PM_SIZEOF		8
 
@@ -232,7 +247,8 @@
 #define PCI_AGP_VERSION		2	/* BCD version number */
 #define PCI_AGP_RFU		3	/* Rest of capability flags */
 #define PCI_AGP_STATUS		4	/* Status register */
-#define  PCI_AGP_STATUS_RQ_MASK	0xff000000	/* Maximum number of requests - 1 */
+/* Maximum number of requests - 1 */
+#define  PCI_AGP_STATUS_RQ_MASK	0xff000000
 #define  PCI_AGP_STATUS_SBA	0x0200	/* Sideband addressing supported */
 #define  PCI_AGP_STATUS_64BIT	0x0020	/* 64-bit addressing supported */
 #define  PCI_AGP_STATUS_FW	0x0010	/* FW transfers supported */
@@ -240,10 +256,13 @@
 #define  PCI_AGP_STATUS_RATE2	0x0002	/* 2x transfer rate supported */
 #define  PCI_AGP_STATUS_RATE1	0x0001	/* 1x transfer rate supported */
 #define PCI_AGP_COMMAND		8	/* Control register */
-#define  PCI_AGP_COMMAND_RQ_MASK 0xff000000  /* Master: Maximum number of requests */
+/* Master: Maximum number of requests */
+#define  PCI_AGP_COMMAND_RQ_MASK 0xff000000
 #define  PCI_AGP_COMMAND_SBA	0x0200	/* Sideband addressing enabled */
-#define  PCI_AGP_COMMAND_AGP	0x0100	/* Allow processing of AGP transactions */
-#define  PCI_AGP_COMMAND_64BIT	0x0020	/* Allow processing of 64-bit addresses */
+/* Allow processing of AGP transactions */
+#define  PCI_AGP_COMMAND_AGP	0x0100
+/* Allow processing of 64-bit addresses */
+#define  PCI_AGP_COMMAND_64BIT	0x0020
 #define  PCI_AGP_COMMAND_FW	0x0010	/* Force FW transfers */
 #define  PCI_AGP_COMMAND_RATE4	0x0004	/* Use 4x rate */
 #define  PCI_AGP_COMMAND_RATE2	0x0002	/* Use 4x rate */
@@ -253,7 +272,8 @@
 /* Slot Identification */
 
 #define PCI_SID_ESR		2	/* Expansion Slot Register */
-#define  PCI_SID_ESR_NSLOTS	0x1f	/* Number of expansion slots available */
+/* Number of expansion slots available */
+#define  PCI_SID_ESR_NSLOTS	0x1f
 #define  PCI_SID_ESR_FIC	0x20	/* First In Chassis Flag */
 #define PCI_SID_CHASSIS_NR	3	/* Chassis Number */
 
@@ -266,7 +286,8 @@
 #define  PCI_MSI_FLAGS_ENABLE	0x01	/* MSI feature enabled */
 #define PCI_MSI_RFU		3	/* Rest of capability flags */
 #define PCI_MSI_ADDRESS_LO	4	/* Lower 32 bits */
-#define PCI_MSI_ADDRESS_HI	8	/* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+/* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+#define PCI_MSI_ADDRESS_HI	8
 #define PCI_MSI_DATA_32		8	/* 16 bits of data for 32-bit devices */
 #define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
 #define PCI_MSI_MASK_BIT	16	/* Mask bits register */
@@ -296,24 +317,30 @@
 #define  PCI_X_STATUS_64BIT	0x00010000	/* 64-bit device */
 #define  PCI_X_STATUS_133MHZ	0x00020000	/* 133 MHz capable */
 #define  PCI_X_STATUS_SPL_DISC	0x00040000	/* Split Completion Discarded */
-#define  PCI_X_STATUS_UNX_SPL	0x00080000	/* Unexpected Split Completion */
+/* Unexpected Split Completion */
+#define  PCI_X_STATUS_UNX_SPL	0x00080000
 #define  PCI_X_STATUS_COMPLEX	0x00100000	/* Device Complexity */
-#define  PCI_X_STATUS_MAX_READ	0x00600000	/* Designed Max Memory Read Count */
-#define  PCI_X_STATUS_MAX_SPLIT	0x03800000	/* Designed Max Outstanding Split Transactions */
-#define  PCI_X_STATUS_MAX_CUM	0x1c000000	/* Designed Max Cumulative Read Size */
-#define  PCI_X_STATUS_SPL_ERR	0x20000000	/* Rcvd Split Completion Error Msg */
+/* Designed Max Memory Read Count */
+#define  PCI_X_STATUS_MAX_READ	0x00600000
+/* Designed Max Cumulative Read Size */
+#define  PCI_X_STATUS_MAX_SPLIT	0x03800000
+/* Rcvd Split Completion Error Msg */
+#define  PCI_X_STATUS_SPL_ERR	0x20000000
 #define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
 #define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */
 
 /* PCI-X bridge registers */
 #define PCI_X_SEC_STATUS	2	/* Secondary status */
-#define  PCI_X_SSTATUS_64BIT	0x0001	/* The bus behind the bridge is 64bits wide */
-#define  PCI_X_SSTATUS_133MHZ	0x0002	/* The bus behind the bridge is 133Mhz Capable */
+/* The bus behind the bridge is 64bits wide */
+#define  PCI_X_SSTATUS_64BIT	0x0001
+/* The bus behind the bridge is 133Mhz Capable */
+#define  PCI_X_SSTATUS_133MHZ	0x0002
 #define  PCI_X_SSTATUS_SPL_DISC 0x0004	/* Split Completion Discarded */
 #define  PCI_X_SSTATUS_UNX_SPL	0x0008	/* Unexpected Split Completion */
 #define  PCI_X_SSTATUS_SPL_OVR	0x0010	/* Split Completion Overrun */
 #define  PCI_X_SSTATUS_SPL_DLY	0x0020	/* Split Completion Delayed */
-#define  PCI_X_SSTATUS_MFREQ(x) (((x) & 0x03c0) >> 6)	/* PCI-X mode and frequency */
+/* PCI-X mode and frequency */
+#define  PCI_X_SSTATUS_MFREQ(x) (((x) & 0x03c0) >> 6)
 #define   PCI_X_SSTATUS_CONVENTIONAL_PCI	0x0
 #define   PCI_X_SSTATUS_MODE1_66MHZ	0x1
 #define   PCI_X_SSTATUS_MODE1_100MHZ	0x2
@@ -325,8 +352,10 @@
 #define   PCI_X_SSTATUS_MODE2_533MHZ_REF_100MHZ	0xe
 #define   PCI_X_SSTATUS_MODE2_533MHZ_REF_133MHZ	0xf
 #define  PCI_X_SSTATUS_VERSION(x)	(((x) >> 12) & 3) /* Version */
-#define  PCI_X_SSTATUS_266MHZ	0x4000	/* The bus behind the bridge is 266Mhz Capable */
-#define  PCI_X_SSTAUTS_533MHZ	0x8000	/* The bus behind the bridge is 533Mhz Capable */
+/* The bus behind the bridge is 266Mhz Capable */
+#define  PCI_X_SSTATUS_266MHZ	0x4000
+/* The bus behind the bridge is 533Mhz Capable */
+#define  PCI_X_SSTAUTS_533MHZ	0x8000
 
 /* PCI Express capability registers */
 
diff --git a/src/include/device/pci_ehci.h b/src/include/device/pci_ehci.h
index 4a89a6085237..1eb3cd025a26 100644
--- a/src/include/device/pci_ehci.h
+++ b/src/include/device/pci_ehci.h
@@ -21,7 +21,7 @@
 #include <device/device.h>
 
 #define EHCI_BAR_INDEX		0x10
-#define PCI_EHCI_CLASSCODE	0x0c0320	/* USB2.0 with EHCI controller */
+#define PCI_EHCI_CLASSCODE	0x0c0320  /* USB2.0 with EHCI controller */
 
 pci_devfn_t pci_ehci_dbg_dev(unsigned int hcd_idx);
 u8 *pci_ehci_base_regs(pci_devfn_t dev);
diff --git a/src/include/device/pci_rom.h b/src/include/device/pci_rom.h
index 7266a8f34e2b..c5ace4c788a6 100644
--- a/src/include/device/pci_rom.h
+++ b/src/include/device/pci_rom.h
@@ -35,7 +35,8 @@ struct  pci_data {
 };
 
 struct rom_header *pci_rom_probe(struct device *dev);
-struct rom_header *pci_rom_load(struct device *dev, struct rom_header *rom_header);
+struct rom_header *pci_rom_load(struct device *dev,
+	struct rom_header *rom_header);
 
 unsigned long
 pci_rom_write_acpi_tables(struct device *device,
diff --git a/src/include/device/resource.h b/src/include/device/resource.h
index 7791e70009bc..d794fb21e7a3 100644
--- a/src/include/device/resource.h
+++ b/src/include/device/resource.h
@@ -11,7 +11,8 @@
 #define IORESOURCE_IRQ		0x00000400
 #define IORESOURCE_DRQ		0x00000800
 
-#define IORESOURCE_TYPE_MASK	(IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_IRQ | IORESOURCE_DRQ)
+#define IORESOURCE_TYPE_MASK	(IORESOURCE_IO | IORESOURCE_MEM \
+				| IORESOURCE_IRQ | IORESOURCE_DRQ)
 
 #define IORESOURCE_PREFETCH	0x00001000	/* No side effects */
 #define IORESOURCE_READONLY	0x00002000
@@ -19,14 +20,18 @@
 #define IORESOURCE_RANGELENGTH	0x00008000
 #define IORESOURCE_SHADOWABLE	0x00010000
 #define IORESOURCE_BUS_HAS_VGA	0x00020000
-#define IORESOURCE_SUBTRACTIVE  0x00040000	/* This resource filters all of the unclaimed transactions
-						 * to the bus below.
-						 */
-#define IORESOURCE_BRIDGE	0x00080000	/* The IO resource has a bus below it. */
-#define IORESOURCE_RESERVE	0x10000000	/* The resource needs to be reserved in the coreboot table */
-#define IORESOURCE_STORED	0x20000000	/* The IO resource assignment has been stored in the device */
-#define IORESOURCE_ASSIGNED	0x40000000	/* An IO resource that has been assigned a value */
-#define IORESOURCE_FIXED	0x80000000	/* An IO resource the allocator must not change */
+/* This resource filters all of the unclaimed transactions to the bus below. */
+#define IORESOURCE_SUBTRACTIVE  0x00040000
+/* The IO resource has a bus below it. */
+#define IORESOURCE_BRIDGE	0x00080000
+/* The resource needs to be reserved in the coreboot table */
+#define IORESOURCE_RESERVE	0x10000000
+/* The IO resource assignment has been stored in the device */
+#define IORESOURCE_STORED	0x20000000
+/* An IO resource that has been assigned a value */
+#define IORESOURCE_ASSIGNED	0x40000000
+/* An IO resource the allocator must not change */
+#define IORESOURCE_FIXED	0x80000000
 
 /* PCI specific resource bits (IORESOURCE_BITS) */
 #define IORESOURCE_PCI64	(1<<0)	/* 64bit long pci resource */
@@ -62,9 +67,11 @@ extern struct resource *new_resource(struct device *dev, unsigned int index);
 extern struct resource *find_resource(struct device *dev, unsigned int index);
 extern resource_t resource_end(struct resource *resource);
 extern resource_t resource_max(struct resource *resource);
-extern void report_resource_stored(struct device *dev, struct resource *resource, const char *comment);
+extern void report_resource_stored(struct device *dev,
+	struct resource *resource, const char *comment);
 
-typedef void (*resource_search_t)(void *gp, struct device *dev, struct resource *res);
+typedef void (*resource_search_t)(void *gp, struct device *dev,
+	struct resource *res);
 extern void search_bus_resources(struct bus *bus,
 	unsigned long type_mask, unsigned long type,
 	resource_search_t search, void *gp);