Kconfig!

Works on Kontron, qemu, and serengeti. 

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>

tested on abuild only. 

Acked-by: Ronald G. Minnich <rminnich@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 366 insertions, 0 deletions

diff --git a/src/mainboard/gigabyte/Kconfig b/src/mainboard/gigabyte/Kconfig
new file mode 100644
index 000000000000..792d6005489e
--- /dev/null
+++ b/src/mainboard/gigabyte/Kconfig
@@ -0,0 +1 @@
+#
diff --git a/src/mainboard/gigabyte/ga-6bxc/devicetree.cb b/src/mainboard/gigabyte/ga-6bxc/devicetree.cb
new file mode 100644
index 000000000000..d75ae19da94e
--- /dev/null
+++ b/src/mainboard/gigabyte/ga-6bxc/devicetree.cb
@@ -0,0 +1,57 @@
+chip northbridge/intel/i440bx		# Northbridge
+  device apic_cluster 0 on		# APIC cluster
+    chip cpu/intel/slot_2		# CPU (FIXME: It's slot 1, actually)
+      device apic 0 on end		# APIC
+    end
+  end
+  device pci_domain 0 on		# PCI domain
+    device pci 0.0 on end		# Host bridge
+    device pci 1.0 on end		# PCI/AGP bridge
+    chip southbridge/intel/i82371eb	# Southbridge
+      device pci 7.0 on			# ISA bridge
+        chip superio/ite/it8671f	# Super I/O
+          device pnp 3f0.0 on		# Floppy
+            io 0x60 = 0x3f0
+            irq 0x70 = 6
+            drq 0x74 = 2
+          end
+          device pnp 3f0.1 on		# COM1
+            io 0x60 = 0x3f8
+            irq 0x70 = 4
+          end
+          device pnp 3f0.2 on		# COM2 / IR
+            io 0x60 = 0x2f8
+            irq 0x70 = 3
+          end
+          device pnp 3f0.3 on		# Parallel port
+            io 0x60 = 0x378
+            irq 0x70 = 7
+          end
+          device pnp 3f0.4 on		# APC
+          end
+          device pnp 3f0.5 on		# PS/2 keyboard
+            io 0x60 = 0x60
+            io 0x62 = 0x64
+            irq 0x70 = 1
+          end
+          device pnp 3f0.6 on		# PS/2 mouse
+            irq 0x70 = 12
+          end
+          device pnp 3f0.7 on		# GPIO
+          end
+        end
+      end
+      device pci 7.1 on	end		# IDE
+      device pci 7.2 on	end		# USB
+      device pci 7.3 on end		# ACPI
+      register "ide0_enable" = "1"
+      register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
+    end
+  end
+end
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/devicetree.cb b/src/mainboard/gigabyte/ga_2761gxdk/devicetree.cb
new file mode 100644
index 000000000000..b7cc72f29308
--- /dev/null
+++ b/src/mainboard/gigabyte/ga_2761gxdk/devicetree.cb
@@ -0,0 +1,106 @@
+chip northbridge/amd/amdk8/root_complex
+        device apic_cluster 0 on
+                chip cpu/amd/socket_AM2
+                        device apic 0 on end
+                end
+        end
+	device pci_domain 0 on
+		chip northbridge/amd/amdk8 #mc0
+			device pci 18.0 on
+				#  devices on link 0, link 0 == LDT 0
+			        chip southbridge/sis/sis966
+					device pci 0.0 on end   # Northbridge
+					device pci 1.0 on		# AGP bridge
+					  chip drivers/pci/onboard	# Integrated VGA
+						device pci 0.0 on end
+						register "rom_address" = "0xfff80000"
+					  end
+					end
+                			device pci 2.0 on # LPC
+						chip superio/ite/it8716f
+							device pnp 2e.0 off #  Floppy (N/A)
+                	                 			io 0x60 = 0x3f0
+                	                			irq 0x70 = 6
+                	                			drq 0x74 = 2
+							end
+                	        			device pnp 2e.1 on #  Com1
+                	                 			io 0x60 = 0x3f8
+                	                			irq 0x70 = 4
+							end
+                	        			device pnp 2e.2 off #  Com2 (N/A)
+                	                 			io 0x60 = 0x2f8
+                	                			irq 0x70 = 3
+							end
+                	        			device pnp 2e.3 off #  Parallel port (N/A)
+                	                 			io 0x60 = 0x378
+                	                			irq 0x70 = 7
+							end
+                	        			device pnp 2e.4 on #  EC
+                	                 			io 0x60 = 0x290
+                	                 			io 0x62 = 0x230
+                	                			irq 0x70 = 9
+							end
+							device pnp 2e.5 off #  PS/2 keyboard (N/A)
+                	                 			io 0x60 = 0x60
+                	                 			io 0x62 = 0x64
+                	                			irq 0x70 = 1
+							end
+							device pnp 2e.6 off #  Mouse (N/A)
+                	                			irq 0x70 = 12
+							end
+                	        			device pnp 2e.8 off #  MIDI (N/A)
+								io 0x60 = 0x300
+								irq 0x70 = 10
+							end
+                	        			device pnp 2e.9 off #  GAME (N/A)
+								io 0x60 = 0x220
+							end
+                	        			device pnp 2e.a off end #  CIR (N/A)
+						end
+					end
+
+                                        device pci 2.5 off end # IDE (SiS5513)
+                                        device pci 2.6 off end # Modem (SiS7013)
+                                        device pci 2.7 off end # Audio (SiS7012)
+                                        device pci 3.0 on end # USB (SiS7001,USB1.1)
+                                        device pci 3.1 on end # USB (SiS7001,USB1.1)
+                                        device pci 3.3 on end # USB (SiS7002,USB2.0)
+                                        device pci 4.0 on end # NIC (SiS191)
+                                        device pci 5.0 on end # SATA (SiS1183,Native Mode)
+                                        device pci 6.0 on end # PCI-e x1
+                                        device pci 7.0 on end # PCI-e x1
+                                        device pci a.0 off end
+                                        device pci b.0 off end
+                                        device pci c.0 off end
+                                        device pci d.0 off end
+                                        device pci e.0 off end
+                                        device pci f.0 off end # HD Audio (SiS7502)
+
+                                        register "ide0_enable" = "1"
+                                        register "ide1_enable" = "1"
+                                        register "sata0_enable" = "1"
+                                        register "sata1_enable" = "1"
+				end
+			end #  device pci 18.0
+			device pci 18.0 on end # Link 1
+			device pci 18.0 on end
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+		end # mc0
+
+	end # PCI domain
+
+#       chip drivers/generic/debug
+#               device pnp 0.0 off end # chip name
+#               device pnp 0.1 on end # pci_regs_all
+#               device pnp 0.2 off end # mem
+#               device pnp 0.3 off end # cpuid
+#               device pnp 0.4 off end # smbus_regs_all
+#               device pnp 0.5 off end # dual core msr
+#               device pnp 0.6 off end # cache size
+#               device pnp 0.7 off end # tsc
+#               device pnp 0.8 off end # io
+#               device pnp 0.9 off end # io
+#       end
+end #root_complex
diff --git a/src/mainboard/gigabyte/m57sli/devicetree.cb b/src/mainboard/gigabyte/m57sli/devicetree.cb
new file mode 100644
index 000000000000..60692d664a18
--- /dev/null
+++ b/src/mainboard/gigabyte/m57sli/devicetree.cb
@@ -0,0 +1,202 @@
+chip northbridge/amd/amdk8/root_complex
+        device apic_cluster 0 on
+                chip cpu/amd/socket_AM2
+                        device apic 0 on end
+                end
+        end
+	device pci_domain 0 on
+		chip northbridge/amd/amdk8 #mc0
+			device pci 18.0 on 
+				#  devices on link 0, link 0 == LDT 0 
+			        chip southbridge/nvidia/mcp55 
+					device pci 0.0 on end   # HT
+                			device pci 1.0 on # LPC
+						chip superio/ite/it8716f
+							# Floppy and any LDN
+							device pnp 2e.0 off
+                	               			# Watchdog from CLKIN, CLKIN = 24 MHz
+                	                 			irq 0x23 = 0x11 
+							# Serial Flash (SPI only)
+								#0x24 = 0x1a
+                	                 			io 0x60 = 0x3f0
+                	                			irq 0x70 = 6
+                	                			drq 0x74 = 2
+							end
+                	        			device pnp 2e.1 on #  Com1
+                	                 			io 0x60 = 0x3f8
+                	                			irq 0x70 = 4
+							end
+                	        			device pnp 2e.2 off #  Com2
+                	                 			io 0x60 = 0x2f8
+                	                			irq 0x70 = 3
+							end
+                	        			device pnp 2e.3 off #  Parallel Port
+                	                 			io 0x60 = 0x378
+                	                			irq 0x70 = 7
+							end
+                	        			device pnp 2e.4 on #  EC
+                	                 			io 0x60 = 0x290
+                	                 			io 0x62 = 0x230
+                	                			irq 0x70 = 9
+							end
+                	        			device pnp 2e.5 on #  Keyboard
+                	                 			io 0x60 = 0x60
+                	                 			io 0x62 = 0x64
+                	                			irq 0x70 = 1
+							end
+                	        			device pnp 2e.6 on #  Mouse
+                	                			irq 0x70 = 12
+							end
+	              	        			device pnp 2e.7 on #  GPIO, SPI flash
+								# pin 84 is not GP10
+								irq 0x25 = 0x0
+				# pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
+								irq 0x26 = 0x43
+								# pin 13 is GP35
+								irq 0x27 = 0x20 
+								# pin 70 is not GP46
+								#irq 0x28 = 0x0
+				# pin 6,3,128,127,126 is GP63,64,65,66,67
+								irq 0x29 = 0x81
+				# Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V
+								#irq 0x2c = 0x1f
+				# Simple I/O base
+								io 0x62 = 0x800
+				# Serial Flash I/O (SPI only)
+								io 0x64 = 0x820
+				# watch dog force timeout (parallel flash only)
+								#irq 0x71 = 0x1
+								# No WDT interrupt
+								irq 0x72 = 0x0 
+					# GPIO pin set 1 disable internal pullup
+								irq 0xb8 = 0x0
+					# GPIO pin set 5 enable internal pullup
+								irq 0xbc = 0x01
+					# SIO pin set 1 alternate function
+								#irq 0xc0 = 0x0
+					# SIO pin set 2 mixed function
+								irq 0xc1 = 0x43
+					# SIO pin set 3 mixed function
+								irq 0xc2 = 0x20
+					# SIO pin set 4 alternate function
+								#irq 0xc3 = 0x0
+					# SIO pin set 1 input mode
+								#irq 0xc8 = 0x0
+					# SIO pin set 2 input mode
+								irq 0xc9 = 0x0
+					# SIO pin set 4 input mode
+								#irq 0xcb = 0x0
+					# Generate SMI# on EC IRQ
+								#irq 0xf0 = 0x10
+					# SMI# level trigger
+								#irq 0xf1 = 0x40
+					# HWMON alert beep pin location
+								irq 0xf6 = 0x28
+							end
+                	        			device pnp 2e.8 off #  MIDI
+								io 0x60 = 0x300
+								irq 0x70 = 10
+							end
+                	        			device pnp 2e.9 off #  GAME
+								io 0x60 = 0x220
+							end
+                	        			device pnp 2e.a off end #  CIR
+						end
+					end
+			                device pci 1.1 on # SM 0
+                                                chip drivers/generic/generic #dimm 0-0-0
+                                                        device i2c 50 on end  
+                                                end              
+                                                chip drivers/generic/generic #dimm 0-0-1
+                                                        device i2c 51 on end
+                                                end     
+                                                chip drivers/generic/generic #dimm 0-1-0
+                                                        device i2c 52 on end
+                                                end             
+                                                chip drivers/generic/generic #dimm 0-1-1
+                                                        device i2c 53 on end
+                                                end              
+                                                chip drivers/generic/generic #dimm 1-0-0
+                                                        device i2c 54 on end
+                                                end     
+                                                chip drivers/generic/generic #dimm 1-0-1
+                                                        device i2c 55 on end
+                                                end     
+                                                chip drivers/generic/generic #dimm 1-1-0
+                                                        device i2c 56 on end
+                                                end     
+                                                chip drivers/generic/generic #dimm 1-1-1
+                                                        device i2c 57 on end
+                                                end 
+					end # SM
+#WTF?!? We already have device pci 1.1 in the section above
+                                        device pci 1.1 on # SM 1
+#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
+#                                                chip drivers/generic/generic #PCIXA Slot1
+#                                                        device i2c 50 on end
+#                                                end
+#                                                chip drivers/generic/generic #PCIXB Slot1
+#                                                        device i2c 51 on end
+#                                                end     
+#                                                chip drivers/generic/generic #PCIXB Slot2
+#                                                        device i2c 52 on end
+#                                                end             
+#                                                chip drivers/generic/generic #PCI Slot1
+#                                                        device i2c 53 on end
+#                                                end              
+#                                                chip drivers/generic/generic #Master MCP55 PCI-E
+#                                                        device i2c 54 on end
+#                                                end     
+#                                                chip drivers/generic/generic #Slave MCP55 PCI-E
+#                                                        device i2c 55 on end
+#                                                end             
+                                                chip drivers/generic/generic #MAC EEPROM
+                                                        device i2c 51 on end
+                                                end 
+
+                                        end # SM 
+	                		device pci 2.0 on end # USB 1.1
+        	        		device pci 2.1 on end # USB 2
+                			device pci 4.0 on end # IDE
+	                		device pci 5.0 on end # SATA 0
+	                		device pci 5.1 on end # SATA 1
+	                		device pci 5.2 on end # SATA 2
+                			device pci 6.0 on end # PCI
+        	        		device pci 6.1 on end # AZA
+	                		device pci 8.0 on end # NIC
+	                		device pci 9.0 off end # NIC
+        	       			device pci a.0 on end # PCI E 5
+        	       			device pci b.0 on end # PCI E 4
+                			device pci c.0 on end # PCI E 3
+                			device pci d.0 on end # PCI E 2
+                			device pci e.0 on end # PCI E 1
+        	       			device pci f.0 on end # PCI E 0
+	                                register "ide0_enable" = "1"
+                	                register "sata0_enable" = "1"
+                        	        register "sata1_enable" = "1"
+					register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
+					register "mac_eeprom_addr" = "0x51"
+				end
+			end #  device pci 18.0 
+			device pci 18.0 on end # Link 1
+			device pci 18.0 on end
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+		end # mc0
+		
+	end # PCI domain
+	
+#       chip drivers/generic/debug 
+#               device pnp 0.0 off end # chip name
+#                device pnp 0.1 on end # pci_regs_all
+#                device pnp 0.2 on end # mem
+#                device pnp 0.3 off end # cpuid
+#                device pnp 0.4 on end # smbus_regs_all
+#                device pnp 0.5 off end # dual core msr
+#                device pnp 0.6 off end # cache size
+#               device pnp 0.7 off end # tsc
+#                device pnp 0.8 off  end # io
+#                device pnp 0.9 off end # io
+#       end  
+end #root_complex