mb/google/brya: Disable unused i2s pins for BT offload

BT offload hardware design is using only i2s0 pins. Need to disable
i2s2 pins which are not used. As per the hardware spec there is an OR
operation between vgpio and physical gpio pins related to i2s2. During
BT offload configuring the i2s2 pins to its native function is causing
offload issue on proto 2 boards.

BUG=b:201736222
TEST=Verified BT offload on brya on proto 1 and proto 2.

Change-Id: Ifbc53848c6ad12e537216cac3c2871088c094f3d
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>

1 files changed, 16 insertions, 6 deletions

diff --git a/src/mainboard/google/brya/variants/brya0/fw_config.c b/src/mainboard/google/brya/variants/brya0/fw_config.c
index 97b460f6a7f6..17d284aa297d 100644
--- a/src/mainboard/google/brya/variants/brya0/fw_config.c
+++ b/src/mainboard/google/brya/variants/brya0/fw_config.c
@@ -33,22 +33,28 @@ static const struct pad_config sndw_disable_pads[] = {
 	PAD_NC(GPP_S5, NONE),
 };
 
-static const struct pad_config i2s_enable_pads[] = {
+static const struct pad_config i2s0_enable_pads[] = {
 	PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2),	/* I2S_HP_SCLK_R */
 	PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2),	/* I2S_HP_SFRM_R */
 	PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2),	/* I2S_PCH_TX_HP_RX_STRAP */
 	PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2),	/* I2S_PCH_RX_HP_TX */
+};
+
+static const struct pad_config i2s2_enable_pads[] = {
 	PAD_CFG_NF(GPP_R4, NONE, DEEP, NF2),	/* I2S_SPKR_SCLK_R */
 	PAD_CFG_NF(GPP_R5, NONE, DEEP, NF2),	/* I2S_SPKR_SFRM_R */
 	PAD_CFG_NF(GPP_R6, NONE, DEEP, NF2),	/* I2S_PCH_TX_SPKR_RX_R */
 	PAD_CFG_NF(GPP_R7, NONE, DEEP, NF2),	/* I2S_PCH_RX_SPKR_TX */
 };
 
-static const struct pad_config i2s_disable_pads[] = {
+static const struct pad_config i2s0_disable_pads[] = {
 	PAD_NC(GPP_R0, NONE),
 	PAD_NC(GPP_R1, NONE),
 	PAD_NC(GPP_R2, NONE),
 	PAD_NC(GPP_R3, NONE),
+};
+
+static const struct pad_config i2s2_disable_pads[] = {
 	PAD_NC(GPP_R4, NONE),
 	PAD_NC(GPP_R5, NONE),
 	PAD_NC(GPP_R6, NONE),
@@ -80,7 +86,8 @@ static const struct pad_config bt_i2s_disable_pads[] = {
 static void enable_i2s(void)
 {
 	gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads));
-	gpio_configure_pads(i2s_enable_pads, ARRAY_SIZE(i2s_enable_pads));
+	gpio_configure_pads(i2s0_enable_pads, ARRAY_SIZE(i2s0_enable_pads));
+	gpio_configure_pads(i2s2_enable_pads, ARRAY_SIZE(i2s2_enable_pads));
 	gpio_configure_pads(sndw_disable_pads, ARRAY_SIZE(sndw_disable_pads));
 }
 
@@ -88,7 +95,8 @@ static void fw_config_handle(void *unused)
 {
 	if (!fw_config_is_provisioned() || fw_config_probe(FW_CONFIG(AUDIO, AUDIO_UNKNOWN))) {
 		printk(BIOS_INFO, "Disable audio related GPIO pins.\n");
-		gpio_configure_pads(i2s_disable_pads, ARRAY_SIZE(i2s_disable_pads));
+		gpio_configure_pads(i2s0_disable_pads, ARRAY_SIZE(i2s0_disable_pads));
+		gpio_configure_pads(i2s2_disable_pads, ARRAY_SIZE(i2s2_disable_pads));
 		gpio_configure_pads(dmic_disable_pads, ARRAY_SIZE(dmic_disable_pads));
 		gpio_configure_pads(sndw_disable_pads, ARRAY_SIZE(sndw_disable_pads));
 		return;
@@ -99,11 +107,13 @@ static void fw_config_handle(void *unused)
 		gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads));
 		gpio_configure_pads(sndw_enable_pads, ARRAY_SIZE(sndw_enable_pads));
 		printk(BIOS_INFO, "BT offload enabled\n");
-		gpio_configure_pads(i2s_enable_pads, ARRAY_SIZE(i2s_enable_pads));
+		gpio_configure_pads(i2s0_enable_pads, ARRAY_SIZE(i2s0_enable_pads));
+		gpio_configure_pads(i2s2_disable_pads, ARRAY_SIZE(i2s2_disable_pads));
 		gpio_configure_pads(bt_i2s_enable_pads, ARRAY_SIZE(bt_i2s_enable_pads));
 	} else {
 		printk(BIOS_INFO, "BT offload disabled\n");
-		gpio_configure_pads(i2s_disable_pads, ARRAY_SIZE(i2s_disable_pads));
+		gpio_configure_pads(i2s0_disable_pads, ARRAY_SIZE(i2s0_disable_pads));
+		gpio_configure_pads(i2s2_disable_pads, ARRAY_SIZE(i2s2_disable_pads));
 		gpio_configure_pads(bt_i2s_disable_pads, ARRAY_SIZE(bt_i2s_disable_pads));
 	}