mb/google/nissa: Increase I2C bus frequency to around 390 kHz

- Set the speed to I2C_SPEED_FAST in each speed_config so that the
  speed_config is actually applied. Currently, the speed_config isn't
  applied, so the hcnt/lcnt calculation falls back to rise_time_ns and
  fall_time_ns, which are 0 since they're not set. This results in
  frequencies around 300 kHz.
- Move the data hold time to the speed_config, ensuring that the
  resulting sda_hold value remains the same.
- For nivviks and nereid, tune scl_lcnt and scl_hcnt for each bus to
  give a frequency around 390 kHz.
- In the baseboard, keep default scl_lcnt and scl_hcnt values. These
  work well for buses with a rise time around 100 ns, and can be used as
  a starting point before tuning them for a specific variant.

BUG=b:229547183
TEST=Measure the clock frequency, tHIGH, tLOW and tVD;DAT on nivviks
and nereid and check they meet the spec.

nereid clock frequencies:
I2C0 - 387.9 kHz
I2C1 - 392.7 kHz
I2C3 - 386.3 kHz
I2C5 - 383.6 kHz

nivviks clock frequencies:
I2C0 - 387.67 kHz
I2C1 - 380.47 kHz
I2C2 - 388.51 kHz
I2C3 - 384.03 kHz
I2C5 - 389.09 kHz

Change-Id: I88a6cfcc893183385eb85a89489e5d270277e537
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64942
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 61 insertions, 0 deletions

diff --git a/src/mainboard/google/brya/variants/nivviks/overridetree.cb b/src/mainboard/google/brya/variants/nivviks/overridetree.cb
index 34b142a0eb15..267cf45c2052 100644
--- a/src/mainboard/google/brya/variants/nivviks/overridetree.cb
+++ b/src/mainboard/google/brya/variants/nivviks/overridetree.cb
@@ -50,6 +50,67 @@ chip soc/intel/alderlake
 		.vnn_icc_max_ma = 500,
 	}"
 
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| I2C0              | TPM. Early init is        |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#| I2C1              | Touchscreen               |
+	#| I2C2              | Sub-board(PSensor)/WCAM   |
+	#| I2C3              | Audio                     |
+	#| I2C5              | Trackpad                  |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.i2c[0] = {
+			.early_init = 1,
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 160,
+				.scl_hcnt = 79,
+				.sda_hold = 7,
+			}
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 157,
+				.scl_hcnt = 79,
+				.sda_hold = 7,
+			}
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 157,
+				.scl_hcnt = 79,
+				.sda_hold = 7,
+			}
+		},
+		.i2c[3] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 158,
+				.scl_hcnt = 79,
+				.sda_hold = 7,
+			}
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 158,
+				.scl_hcnt = 79,
+				.sda_hold = 7,
+			}
+		},
+	}"
+
 	device domain 0 on
 		device ref dtt on
 			chip drivers/intel/dptf