AGESA fam15tn boards: Clean up devicetree

Remove double nesting of chip northbridge/amd.
There is requirement to keep SPD address map in
the same chip block with device 0:18.2.

Change-Id: I67fcb59a63046865f660e628a61c2944b0f89a74
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30734
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: mikeb mikeb <mikebdp2@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 133 insertions, 134 deletions

diff --git a/src/mainboard/msi/ms7721/devicetree.cb b/src/mainboard/msi/ms7721/devicetree.cb
index 35079255ad54..d3991f1bb1a5 100644
--- a/src/mainboard/msi/ms7721/devicetree.cb
+++ b/src/mainboard/msi/ms7721/devicetree.cb
@@ -23,142 +23,141 @@ chip northbridge/amd/agesa/family15tn/root_complex
 
 	device domain 0 on
 		subsystemid 0x1022 0x1410 inherit
-		chip northbridge/amd/agesa/family15tn # CPU side of HT root complex
-
-			chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
-				device pci 0.0 on  end # Root Complex
-				device pci 0.2 on  end # IOMMU
-				device pci 1.0 on  end # Internal Graphics P2P bridge 0x990e
-				device pci 1.1 on  end # Internal Multimedia
-				device pci 2.0 on  end # PCIe x16
-				device pci 3.0 off end # -
-				device pci 4.0 on  end # PCIE Realtek LAN
-				device pci 5.0 on  end # PCIE x1 (1)
-				device pci 6.0 on  end # PCIE x1 (2)
-				device pci 7.0 off end # LAN
-				device pci 8.0 off end # NB/SB Link P2P bridge
-			end	#chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
-
-			chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
-				device pci 10.0 on  end # USB XHCI
-				device pci 10.1 on  end # USB XHCI
-				device pci 11.0 on  end # SATA
-				device pci 12.0 on  end # USB OHCI
-				device pci 12.2 on  end # USB EHCI
-				device pci 13.0 on  end # USB OHCI
-				device pci 13.2 on  end # USB EHCI
-				device pci 14.0 on	# SMBUS
-					chip drivers/generic/generic #dimm 0
-						device i2c 50 on end # 7-bit SPD address
+		chip northbridge/amd/agesa/family15tn
+			device pci 0.0 on  end # Root Complex
+			device pci 0.2 on  end # IOMMU
+			device pci 1.0 on  end # Internal Graphics P2P bridge 0x990e
+			device pci 1.1 on  end # Internal Multimedia
+			device pci 2.0 on  end # PCIe x16
+			device pci 3.0 off end # -
+			device pci 4.0 on  end # PCIE Realtek LAN
+			device pci 5.0 on  end # PCIE x1 (1)
+			device pci 6.0 on  end # PCIE x1 (2)
+			device pci 7.0 off end # LAN
+			device pci 8.0 off end # NB/SB Link P2P bridge
+		end	#chip northbridge/amd/agesa/family15tn
+
+		chip southbridge/amd/agesa/hudson
+			device pci 10.0 on  end # USB XHCI
+			device pci 10.1 on  end # USB XHCI
+			device pci 11.0 on  end # SATA
+			device pci 12.0 on  end # USB OHCI
+			device pci 12.2 on  end # USB EHCI
+			device pci 13.0 on  end # USB OHCI
+			device pci 13.2 on  end # USB EHCI
+			device pci 14.0 on	# SMBUS
+				chip drivers/generic/generic #dimm 0
+					device i2c 50 on end # 7-bit SPD address
+				end
+				chip drivers/generic/generic #dimm 1
+					device i2c 51 on end # 7-bit SPD address
+				end
+			end # SM
+			device pci 14.1 off end # IDE	0x439c
+			device pci 14.2 on  end # Azalia (Audio)
+			device pci 14.3 on	# LPC	0x439d
+				chip superio/fintek/f71869ad
+					register "multi_function_register_1" = "0x01"
+					register "multi_function_register_2" = "0x0f"
+					register "multi_function_register_3" = "0x2f"
+					register "multi_function_register_4" = "0x04"
+					register "multi_function_register_5" = "0x3e"
+
+					# HWM configuration registers
+					register "hwm_smbus_address" = "0x98"
+					register "hwm_smbus_control_reg" = "0x02"
+					register "hwm_fan_type_sel_reg" = "0x00"
+					register "hwm_fan1_temp_adj_rate_reg" = "0x33"
+					register "hwm_fan_mode_sel_reg" = "0x07"
+					register "hwm_fan1_idx_rpm_mode" = "0x0e"
+					register "hwm_fan1_seg1_speed_count" = "0xff"
+					register "hwm_fan1_seg2_speed_count" = "0x0e"
+					register "hwm_fan1_seg3_speed_count" = "0x07"
+					register "hwm_fan1_temp_map_sel" = "0x8c"
+					register "hwm_temp_sensor_type" = "0x08"
+
+					device pnp 4e.00 off end
+					device pnp 4e.01 on	# COM1
+						io 0x60 = 0x3f8
+						irq 0x70 = 4
 					end
-					chip drivers/generic/generic #dimm 1
-						device i2c 51 on end # 7-bit SPD address
+					device pnp 4e.02 off	# COM2 (Level converter not populated, but may be usable?)
+						io 0x60 = 0x2f8
+						irq 0x70 = 3
+					end
+					device pnp 4e.03 on	# Parallel Port
+						io 0x60 = 0x378
+						irq 0x70 = 5
+						drq 0x74 = 3
+						irq 0xf0 = 0x44 # PRT Mode Select Register
+					end
+					device pnp 4e.04 on	# Hardware Monitor
+						io 0x60 = 0x225	# Fintek datasheet says 0x295.
+						irq 0x70 = 0
+					end
+					device pnp 4e.05 on	# KBC
+						io 0x60 = 0x060
+						irq 0x70 = 1 # Keyboard IRQ
+						irq 0x72 = 12 # Mouse IRQ
+					end
+					device pnp 4e.06 on	# GPIO
+						# ! GPIO config is disabled because the code in romstage.c
+						# ! has already taken care of it
+						#io 0x60 = 0xa00
+						#irq 0xe0 = 0x04	# GPIO1 output
+						#irq 0xe1 = 0xff	# GPIO1 output data
+						#irq 0xe3 = 0x04	# GPIO1 drive enable
+						#irq 0xe4 = 0x00	# GPIO1 PME enable
+						#irq 0xe5 = 0x00	# GPIO1 input detect select
+						#irq 0xe6 = 0x40	# GPIO1 event status
+
+						#irq 0xd0 = 0x00	# GPIO2 output
+						#irq 0xd1 = 0xff	# GPIO2 output data
+						#irq 0xd3 = 0x00	# GPIO2 drive enable
+
+						#irq 0xc0 = 0x00	# GPIO3 output
+						#irq 0xc1 = 0xff	# GPIO3 output data
+
+						#irq 0xb0 = 0x04	# GPIO4 output
+						#irq 0xb1 = 0x04	# GPIO4 output data
+						#irq 0xb3 = 0x04	# GPIO4 drive enable
+						#irq 0xb4 = 0x00	# GPIO4 PME enable
+						#irq 0xb5 = 0x00	# GPIO4 input detect select
+						#irq 0xb6 = 0x00	# GPIO4 event status
+
+						#irq 0xa0 = 0x00	# GPIO5 output
+						#irq 0xa1 = 0x1f	# GPIO5 output data
+						#irq 0xa3 = 0x00	# GPIO5 drive enable
+						#irq 0xa4 = 0x00	# GPIO5 PME enable
+						#irq 0xa5 = 0xff	# GPIO5 input detect select
+						#irq 0xa6 = 0xe0	# GPIO5 event status
+
+						#irq 0x90 = 0x00	# GPIO6 output
+						#irq 0x91 = 0xff	# GPIO6 output data
+						#irq 0x93 = 0x00	# GPIO6 drive enable
+
+						#irq 0x80 = 0x00	# GPIO7 output
+						#irq 0x81 = 0xff	# GPIO7 output data
+						#irq 0x83 = 0x00	# GPIO7 drive enable
 					end
-				end # SM
-				device pci 14.1 off end # IDE	0x439c
-				device pci 14.2 on  end # Azalia (Audio)
-				device pci 14.3 on	# LPC	0x439d
-					chip superio/fintek/f71869ad
-						register "multi_function_register_1" = "0x01"
-						register "multi_function_register_2" = "0x0f"
-						register "multi_function_register_3" = "0x2f"
-						register "multi_function_register_4" = "0x04"
-						register "multi_function_register_5" = "0x3e"
-
-						# HWM configuration registers
-						register "hwm_smbus_address" = "0x98"
-						register "hwm_smbus_control_reg" = "0x02"
-						register "hwm_fan_type_sel_reg" = "0x00"
-						register "hwm_fan1_temp_adj_rate_reg" = "0x33"
-						register "hwm_fan_mode_sel_reg" = "0x07"
-						register "hwm_fan1_idx_rpm_mode" = "0x0e"
-						register "hwm_fan1_seg1_speed_count" = "0xff"
-						register "hwm_fan1_seg2_speed_count" = "0x0e"
-						register "hwm_fan1_seg3_speed_count" = "0x07"
-						register "hwm_fan1_temp_map_sel" = "0x8c"
-						register "hwm_temp_sensor_type" = "0x08"
-
-						device pnp 4e.00 off end
-						device pnp 4e.01 on	# COM1
-							io 0x60 = 0x3f8
-							irq 0x70 = 4
-						end
-						device pnp 4e.02 off	# COM2 (Level converter not populated, but may be usable?)
-							io 0x60 = 0x2f8
-							irq 0x70 = 3
-						end
-						device pnp 4e.03 on	# Parallel Port
-							io 0x60 = 0x378
-							irq 0x70 = 5
-							drq 0x74 = 3
-							irq 0xf0 = 0x44 # PRT Mode Select Register
-						end
-						device pnp 4e.04 on	# Hardware Monitor
-							io 0x60 = 0x225	# Fintek datasheet says 0x295.
-							irq 0x70 = 0
-						end
-						device pnp 4e.05 on	# KBC
-							io 0x60 = 0x060
-							irq 0x70 = 1 # Keyboard IRQ
-							irq 0x72 = 12 # Mouse IRQ
-						end
-						device pnp 4e.06 on	# GPIO
-							# ! GPIO config is disabled because the code in romstage.c
-							# ! has already taken care of it
-							#io 0x60 = 0xa00
-							#irq 0xe0 = 0x04	# GPIO1 output
-							#irq 0xe1 = 0xff	# GPIO1 output data
-							#irq 0xe3 = 0x04	# GPIO1 drive enable
-							#irq 0xe4 = 0x00	# GPIO1 PME enable
-							#irq 0xe5 = 0x00	# GPIO1 input detect select
-							#irq 0xe6 = 0x40	# GPIO1 event status
-
-							#irq 0xd0 = 0x00	# GPIO2 output
-							#irq 0xd1 = 0xff	# GPIO2 output data
-							#irq 0xd3 = 0x00	# GPIO2 drive enable
-
-							#irq 0xc0 = 0x00	# GPIO3 output
-							#irq 0xc1 = 0xff	# GPIO3 output data
-
-							#irq 0xb0 = 0x04	# GPIO4 output
-							#irq 0xb1 = 0x04	# GPIO4 output data
-							#irq 0xb3 = 0x04	# GPIO4 drive enable
-							#irq 0xb4 = 0x00	# GPIO4 PME enable
-							#irq 0xb5 = 0x00	# GPIO4 input detect select
-							#irq 0xb6 = 0x00	# GPIO4 event status
-
-							#irq 0xa0 = 0x00	# GPIO5 output
-							#irq 0xa1 = 0x1f	# GPIO5 output data
-							#irq 0xa3 = 0x00	# GPIO5 drive enable
-							#irq 0xa4 = 0x00	# GPIO5 PME enable
-							#irq 0xa5 = 0xff	# GPIO5 input detect select
-							#irq 0xa6 = 0xe0	# GPIO5 event status
-
-							#irq 0x90 = 0x00	# GPIO6 output
-							#irq 0x91 = 0xff	# GPIO6 output data
-							#irq 0x93 = 0x00	# GPIO6 drive enable
-
-							#irq 0x80 = 0x00	# GPIO7 output
-							#irq 0x81 = 0xff	# GPIO7 output data
-							#irq 0x83 = 0x00	# GPIO7 drive enable
-						end
-
-						device pnp 4e.07 on end	# WDT
-						device pnp 4e.08 off end	# CIR
-						device pnp 4e.0a on end	# PME
-					end # f71869ad
-				end	#device pci 14.3 # LPC
-				device pci 14.4 on  end # PCI 0x4384 (PCI slot on board)
-				device pci 14.5 on  end # USB OHCI
-				device pci 14.6 off end # Gec
-				device pci 14.7 off end # SD
-				device pci 15.0 off end # unused
-				device pci 15.1 off end # unused
-				device pci 15.2 off end # unused
-				device pci 15.3 off end # unused
-
-			end	#chip southbridge/amd/agesa/hudson
 
+					device pnp 4e.07 on end	# WDT
+					device pnp 4e.08 off end	# CIR
+					device pnp 4e.0a on end	# PME
+				end # f71869ad
+			end	#device pci 14.3 # LPC
+			device pci 14.4 on  end # PCI 0x4384 (PCI slot on board)
+			device pci 14.5 on  end # USB OHCI
+			device pci 14.6 off end # Gec
+			device pci 14.7 off end # SD
+			device pci 15.0 off end # unused
+			device pci 15.1 off end # unused
+			device pci 15.2 off end # unused
+			device pci 15.3 off end # unused
+
+		end	#chip southbridge/amd/agesa/hudson
+
+		chip northbridge/amd/agesa/family15tn
 			device pci 18.0 on end
 			device pci 18.1 on end
 			device pci 18.2 on end
@@ -171,7 +170,7 @@ chip northbridge/amd/agesa/family15tn/root_complex
 				{ {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
 				{ {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
 			}"
+		end
 
-		end	#chip northbridge/amd/agesa/family15tn # CPU side of HT root complex
 	end	#domain
 end	#chip northbridge/amd/agesa/family15tn/root_complex