nb/intel/nehalem: Move romstage boilerplate to a common location

Move the mainboard_romstage_entry to a common location and provide
mainboard specific callbacks.

Change-Id: Ia827053617cead5d2cf8e9f06cb68c2cbb668ca9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

1 files changed, 5 insertions, 100 deletions

diff --git a/src/mainboard/packardbell/ms2290/romstage.c b/src/mainboard/packardbell/ms2290/romstage.c
index 6cee71165cb3..b25676bf5370 100644
--- a/src/mainboard/packardbell/ms2290/romstage.c
+++ b/src/mainboard/packardbell/ms2290/romstage.c
@@ -17,25 +17,12 @@
  */
 
 #include <stdint.h>
-#include <arch/io.h>
 #include <device/pci_ops.h>
-#include <device/pci_def.h>
-#include <cpu/x86/lapic.h>
-#include <romstage_handoff.h>
-#include <console/console.h>
-#include <arch/romstage.h>
-#include <ec/acpi/ec.h>
-#include <timestamp.h>
-#include <arch/acpi.h>
 
-#include <southbridge/intel/common/gpio.h>
 #include <southbridge/intel/ibexpeak/pch.h>
 #include <northbridge/intel/nehalem/nehalem.h>
 
-#include <northbridge/intel/nehalem/raminit.h>
-#include <southbridge/intel/ibexpeak/me.h>
-
-static void pch_enable_lpc(void)
+void mainboard_lpc_init(void)
 {
 	/* Enable EC, PS/2 Keyboard/Mouse */
 	pci_write_config16(PCH_LPC_DEV, LPC_EN,
@@ -75,94 +62,12 @@ const struct southbridge_usb_port mainboard_usb_ports[] = {
 	{ 1, IF1_55F, 7 },
 };
 
-static void rcba_config(void)
+void mainboard_pre_raminit(void)
 {
-	southbridge_configure_default_intmap();
-
-	/* Must set BIT0 (hides performance counters PCI device).
-	   coreboot enables the Rate Matching Hub which makes the UHCI PCI
-	   devices disappear, so BIT5-12 and BIT28 can be set to hide those. */
-	RCBA32(FD) = (1 << 28) | (0xff << 5) | 1;
-
-	/* Set reserved bit to 1 */
-	RCBA32(FD2) = 1;
-
-	early_usb_init(mainboard_usb_ports);
 }
 
-void mainboard_romstage_entry(void)
+void mainboard_get_spd_map(u8 *spd_addrmap)
 {
-	u32 reg32;
-	int s3resume = 0;
-	const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
-
-	/* SERR pin is confused on reset. Clear NMI.  */
-	outb(4, 0x61);
-	outb(0, 0x61);
-
-	enable_lapic();
-
-	nehalem_early_initialization(NEHALEM_MOBILE);
-
-	pch_enable_lpc();
-
-	/* Enable GPIOs */
-	pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
-	pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10);
-
-	setup_pch_gpios(&mainboard_gpio_map);
-
-	pch_setup_cir(NEHALEM_MOBILE);
-
-	/* This should probably go away. Until now it is required
-	 * and mainboard specific
-	 */
-	rcba_config();
-
-	console_init();
-
-	/* Read PM1_CNT */
-	reg32 = inl(DEFAULT_PMBASE + 0x04);
-	printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32);
-	if (((reg32 >> 10) & 7) == 5) {
-		u8 reg8;
-		reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2);
-		printk(BIOS_DEBUG, "a2: %02x\n", reg8);
-		if (!(reg8 & 0x20)) {
-			outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04);
-			printk(BIOS_DEBUG, "Bad resume from S3 detected.\n");
-		} else {
-			if (acpi_s3_resume_allowed()) {
-				printk(BIOS_DEBUG, "Resume from S3 detected.\n");
-				s3resume = 1;
-			} else {
-				printk(BIOS_DEBUG,
-				       "Resume from S3 detected, but disabled.\n");
-			}
-		}
-	}
-
-	/* Enable SMBUS. */
-	enable_smbus();
-
-	early_thermal_init();
-
-	timestamp_add_now(TS_BEFORE_INITRAM);
-
-	chipset_init(s3resume);
-	raminit(s3resume, spd_addrmap);
-
-	timestamp_add_now(TS_AFTER_INITRAM);
-
-	intel_early_me_status();
-
-	if (s3resume) {
-		/* Clear SLP_TYPE. This will break stage2 but
-		 * we care for that when we get there.
-		 */
-		reg32 = inl(DEFAULT_PMBASE + 0x04);
-		outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04);
-	}
-
-	romstage_handoff_init(s3resume);
+	spd_addrmap[0] = 0x50;
+	spd_addrmap[2] = 0x52;
 }